| /* m68hc11-dis.c -- Motorola 68HC11 & 68HC12 disassembly |
| Copyright 1999, 2000, 2001, 2002, 2003, 2006, 2007 |
| Free Software Foundation, Inc. |
| Written by Stephane Carrez (stcarrez@nerim.fr) |
| |
| This file is part of the GNU opcodes library. |
| |
| This library is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 3, or (at your option) |
| any later version. |
| |
| It is distributed in the hope that it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public |
| License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, |
| MA 02110-1301, USA. */ |
| |
| #include <stdio.h> |
| |
| #include "ansidecl.h" |
| #include "opcode/m68hc11.h" |
| #include "dis-asm.h" |
| |
| #define PC_REGNUM 3 |
| |
| static const char *const reg_name[] = { |
| "X", "Y", "SP", "PC" |
| }; |
| |
| static const char *const reg_src_table[] = { |
| "A", "B", "CCR", "TMP3", "D", "X", "Y", "SP" |
| }; |
| |
| static const char *const reg_dst_table[] = { |
| "A", "B", "CCR", "TMP2", "D", "X", "Y", "SP" |
| }; |
| |
| #define OP_PAGE_MASK (M6811_OP_PAGE2|M6811_OP_PAGE3|M6811_OP_PAGE4) |
| |
| /* Prototypes for local functions. */ |
| static int read_memory (bfd_vma, bfd_byte *, int, struct disassemble_info *); |
| static int print_indexed_operand (bfd_vma, struct disassemble_info *, |
| int*, int, int, bfd_vma); |
| static int print_insn (bfd_vma, struct disassemble_info *, int); |
| |
| static int |
| read_memory (bfd_vma memaddr, bfd_byte* buffer, int size, |
| struct disassemble_info* info) |
| { |
| int status; |
| |
| /* Get first byte. Only one at a time because we don't know the |
| size of the insn. */ |
| status = (*info->read_memory_func) (memaddr, buffer, size, info); |
| if (status != 0) |
| { |
| (*info->memory_error_func) (status, memaddr, info); |
| return -1; |
| } |
| return 0; |
| } |
| |
| |
| /* Read the 68HC12 indexed operand byte and print the corresponding mode. |
| Returns the number of bytes read or -1 if failure. */ |
| static int |
| print_indexed_operand (bfd_vma memaddr, struct disassemble_info* info, |
| int* indirect, int mov_insn, int pc_offset, |
| bfd_vma endaddr) |
| { |
| bfd_byte buffer[4]; |
| int reg; |
| int status; |
| short sval; |
| int pos = 1; |
| |
| if (indirect) |
| *indirect = 0; |
| |
| status = read_memory (memaddr, &buffer[0], 1, info); |
| if (status != 0) |
| { |
| return status; |
| } |
| |
| /* n,r with 5-bits signed constant. */ |
| if ((buffer[0] & 0x20) == 0) |
| { |
| reg = (buffer[0] >> 6) & 3; |
| sval = (buffer[0] & 0x1f); |
| if (sval & 0x10) |
| sval |= 0xfff0; |
| /* 68HC12 requires an adjustment for movb/movw pc relative modes. */ |
| if (reg == PC_REGNUM && info->mach == bfd_mach_m6812 && mov_insn) |
| sval += pc_offset; |
| (*info->fprintf_func) (info->stream, "%d,%s", |
| (int) sval, reg_name[reg]); |
| |
| if (reg == PC_REGNUM) |
| { |
| (* info->fprintf_func) (info->stream, " {"); |
| (* info->print_address_func) (endaddr + sval, info); |
| (* info->fprintf_func) (info->stream, "}"); |
| } |
| } |
| |
| /* Auto pre/post increment/decrement. */ |
| else if ((buffer[0] & 0xc0) != 0xc0) |
| { |
| const char *mode; |
| |
| reg = (buffer[0] >> 6) & 3; |
| sval = (buffer[0] & 0x0f); |
| if (sval & 0x8) |
| { |
| sval |= 0xfff0; |
| sval = -sval; |
| mode = "-"; |
| } |
| else |
| { |
| sval = sval + 1; |
| mode = "+"; |
| } |
| (*info->fprintf_func) (info->stream, "%d,%s%s%s", |
| (int) sval, |
| (buffer[0] & 0x10 ? "" : mode), |
| reg_name[reg], (buffer[0] & 0x10 ? mode : "")); |
| } |
| |
| /* [n,r] 16-bits offset indexed indirect. */ |
| else if ((buffer[0] & 0x07) == 3) |
| { |
| if (mov_insn) |
| { |
| (*info->fprintf_func) (info->stream, "<invalid op: 0x%x>", |
| buffer[0] & 0x0ff); |
| return 0; |
| } |
| reg = (buffer[0] >> 3) & 0x03; |
| status = read_memory (memaddr + pos, &buffer[0], 2, info); |
| if (status != 0) |
| { |
| return status; |
| } |
| |
| pos += 2; |
| sval = ((buffer[0] << 8) | (buffer[1] & 0x0FF)); |
| (*info->fprintf_func) (info->stream, "[%u,%s]", |
| sval & 0x0ffff, reg_name[reg]); |
| if (indirect) |
| *indirect = 1; |
| } |
| |
| /* n,r with 9 and 16 bit signed constant. */ |
| else if ((buffer[0] & 0x4) == 0) |
| { |
| if (mov_insn) |
| { |
| (*info->fprintf_func) (info->stream, "<invalid op: 0x%x>", |
| buffer[0] & 0x0ff); |
| return 0; |
| } |
| reg = (buffer[0] >> 3) & 0x03; |
| status = read_memory (memaddr + pos, |
| &buffer[1], (buffer[0] & 0x2 ? 2 : 1), info); |
| if (status != 0) |
| { |
| return status; |
| } |
| if (buffer[0] & 2) |
| { |
| sval = ((buffer[1] << 8) | (buffer[2] & 0x0FF)); |
| sval &= 0x0FFFF; |
| pos += 2; |
| endaddr += 2; |
| } |
| else |
| { |
| sval = buffer[1] & 0x00ff; |
| if (buffer[0] & 0x01) |
| sval |= 0xff00; |
| pos++; |
| endaddr++; |
| } |
| (*info->fprintf_func) (info->stream, "%d,%s", |
| (int) sval, reg_name[reg]); |
| if (reg == PC_REGNUM) |
| { |
| (* info->fprintf_func) (info->stream, " {"); |
| (* info->print_address_func) (endaddr + sval, info); |
| (* info->fprintf_func) (info->stream, "}"); |
| } |
| } |
| else |
| { |
| reg = (buffer[0] >> 3) & 0x03; |
| switch (buffer[0] & 3) |
| { |
| case 0: |
| (*info->fprintf_func) (info->stream, "A,%s", reg_name[reg]); |
| break; |
| case 1: |
| (*info->fprintf_func) (info->stream, "B,%s", reg_name[reg]); |
| break; |
| case 2: |
| (*info->fprintf_func) (info->stream, "D,%s", reg_name[reg]); |
| break; |
| case 3: |
| default: |
| (*info->fprintf_func) (info->stream, "[D,%s]", reg_name[reg]); |
| if (indirect) |
| *indirect = 1; |
| break; |
| } |
| } |
| |
| return pos; |
| } |
| |
| /* Disassemble one instruction at address 'memaddr'. Returns the number |
| of bytes used by that instruction. */ |
| static int |
| print_insn (bfd_vma memaddr, struct disassemble_info* info, int arch) |
| { |
| int status; |
| bfd_byte buffer[4]; |
| unsigned char code; |
| long format, pos, i; |
| short sval; |
| const struct m68hc11_opcode *opcode; |
| |
| /* Get first byte. Only one at a time because we don't know the |
| size of the insn. */ |
| status = read_memory (memaddr, buffer, 1, info); |
| if (status != 0) |
| { |
| return status; |
| } |
| |
| format = 0; |
| code = buffer[0]; |
| pos = 0; |
| |
| /* Look for page2,3,4 opcodes. */ |
| if (code == M6811_OPCODE_PAGE2) |
| { |
| pos++; |
| format = M6811_OP_PAGE2; |
| } |
| else if (code == M6811_OPCODE_PAGE3 && arch == cpu6811) |
| { |
| pos++; |
| format = M6811_OP_PAGE3; |
| } |
| else if (code == M6811_OPCODE_PAGE4 && arch == cpu6811) |
| { |
| pos++; |
| format = M6811_OP_PAGE4; |
| } |
| |
| /* We are in page2,3,4; get the real opcode. */ |
| if (pos == 1) |
| { |
| status = read_memory (memaddr + pos, &buffer[1], 1, info); |
| if (status != 0) |
| { |
| return status; |
| } |
| code = buffer[1]; |
| } |
| |
| |
| /* Look first for a 68HC12 alias. All of them are 2-bytes long and |
| in page 1. There is no operand to print. We read the second byte |
| only when we have a possible match. */ |
| if ((arch & cpu6812) && format == 0) |
| { |
| int must_read = 1; |
| |
| /* Walk the alias table to find a code1+code2 match. */ |
| for (i = 0; i < m68hc12_num_alias; i++) |
| { |
| if (m68hc12_alias[i].code1 == code) |
| { |
| if (must_read) |
| { |
| status = read_memory (memaddr + pos + 1, |
| &buffer[1], 1, info); |
| if (status != 0) |
| break; |
| |
| must_read = 1; |
| } |
| if (m68hc12_alias[i].code2 == (unsigned char) buffer[1]) |
| { |
| (*info->fprintf_func) (info->stream, "%s", |
| m68hc12_alias[i].name); |
| return 2; |
| } |
| } |
| } |
| } |
| |
| pos++; |
| |
| /* Scan the opcode table until we find the opcode |
| with the corresponding page. */ |
| opcode = m68hc11_opcodes; |
| for (i = 0; i < m68hc11_num_opcodes; i++, opcode++) |
| { |
| int offset; |
| int pc_src_offset; |
| int pc_dst_offset = 0; |
| |
| if ((opcode->arch & arch) == 0) |
| continue; |
| if (opcode->opcode != code) |
| continue; |
| if ((opcode->format & OP_PAGE_MASK) != format) |
| continue; |
| |
| if (opcode->format & M6812_OP_REG) |
| { |
| int j; |
| int is_jump; |
| |
| if (opcode->format & M6811_OP_JUMP_REL) |
| is_jump = 1; |
| else |
| is_jump = 0; |
| |
| status = read_memory (memaddr + pos, &buffer[0], 1, info); |
| if (status != 0) |
| { |
| return status; |
| } |
| for (j = 0; i + j < m68hc11_num_opcodes; j++) |
| { |
| if ((opcode[j].arch & arch) == 0) |
| continue; |
| if (opcode[j].opcode != code) |
| continue; |
| if (is_jump) |
| { |
| if (!(opcode[j].format & M6811_OP_JUMP_REL)) |
| continue; |
| |
| if ((opcode[j].format & M6812_OP_IBCC_MARKER) |
| && (buffer[0] & 0xc0) != 0x80) |
| continue; |
| if ((opcode[j].format & M6812_OP_TBCC_MARKER) |
| && (buffer[0] & 0xc0) != 0x40) |
| continue; |
| if ((opcode[j].format & M6812_OP_DBCC_MARKER) |
| && (buffer[0] & 0xc0) != 0) |
| continue; |
| if ((opcode[j].format & M6812_OP_EQ_MARKER) |
| && (buffer[0] & 0x20) == 0) |
| break; |
| if (!(opcode[j].format & M6812_OP_EQ_MARKER) |
| && (buffer[0] & 0x20) != 0) |
| break; |
| continue; |
| } |
| if (opcode[j].format & M6812_OP_EXG_MARKER && buffer[0] & 0x80) |
| break; |
| if ((opcode[j].format & M6812_OP_SEX_MARKER) |
| && (((buffer[0] & 0x07) >= 3 && (buffer[0] & 7) <= 7)) |
| && ((buffer[0] & 0x0f0) <= 0x20)) |
| break; |
| if (opcode[j].format & M6812_OP_TFR_MARKER |
| && !(buffer[0] & 0x80)) |
| break; |
| } |
| if (i + j < m68hc11_num_opcodes) |
| opcode = &opcode[j]; |
| } |
| |
| /* We have found the opcode. Extract the operand and print it. */ |
| (*info->fprintf_func) (info->stream, "%s", opcode->name); |
| |
| format = opcode->format; |
| if (format & (M6811_OP_MASK | M6811_OP_BITMASK |
| | M6811_OP_JUMP_REL | M6812_OP_JUMP_REL16)) |
| { |
| (*info->fprintf_func) (info->stream, "\t"); |
| } |
| |
| /* The movb and movw must be handled in a special way... |
| The source constant 'ii' is not always at the same place. |
| This is the same for the destination for the post-indexed byte. |
| The 'offset' is used to do the appropriate correction. |
| |
| offset offset |
| for constant for destination |
| movb 18 OB ii hh ll 0 0 |
| 18 08 xb ii 1 -1 |
| 18 0C hh ll hh ll 0 0 |
| 18 09 xb hh ll 1 -1 |
| 18 0D xb hh ll 0 0 |
| 18 0A xb xb 0 0 |
| |
| movw 18 03 jj kk hh ll 0 0 |
| 18 00 xb jj kk 1 -1 |
| 18 04 hh ll hh ll 0 0 |
| 18 01 xb hh ll 1 -1 |
| 18 05 xb hh ll 0 0 |
| 18 02 xb xb 0 0 |
| |
| After the source operand is read, the position 'pos' is incremented |
| this explains the negative offset for destination. |
| |
| movb/movw above are the only instructions with this matching |
| format. */ |
| offset = ((format & M6812_OP_IDX_P2) |
| && (format & (M6811_OP_IMM8 | M6811_OP_IMM16 | |
| M6811_OP_IND16))); |
| |
| /* Operand with one more byte: - immediate, offset, |
| direct-low address. */ |
| if (format & |
| (M6811_OP_IMM8 | M6811_OP_IX | M6811_OP_IY | M6811_OP_DIRECT)) |
| { |
| status = read_memory (memaddr + pos + offset, &buffer[0], 1, info); |
| if (status != 0) |
| { |
| return status; |
| } |
| |
| pos++; |
| |
| /* This movb/movw is special (see above). */ |
| offset = -offset; |
| |
| pc_dst_offset = 2; |
| if (format & M6811_OP_IMM8) |
| { |
| (*info->fprintf_func) (info->stream, "#%d", (int) buffer[0]); |
| format &= ~M6811_OP_IMM8; |
| /* Set PC destination offset. */ |
| pc_dst_offset = 1; |
| } |
| else if (format & M6811_OP_IX) |
| { |
| /* Offsets are in range 0..255, print them unsigned. */ |
| (*info->fprintf_func) (info->stream, "%u,x", buffer[0] & 0x0FF); |
| format &= ~M6811_OP_IX; |
| } |
| else if (format & M6811_OP_IY) |
| { |
| (*info->fprintf_func) (info->stream, "%u,y", buffer[0] & 0x0FF); |
| format &= ~M6811_OP_IY; |
| } |
| else if (format & M6811_OP_DIRECT) |
| { |
| (*info->fprintf_func) (info->stream, "*"); |
| (*info->print_address_func) (buffer[0] & 0x0FF, info); |
| format &= ~M6811_OP_DIRECT; |
| } |
| } |
| |
| #define M6812_DST_MOVE (M6812_OP_IND16_P2 | M6812_OP_IDX_P2) |
| #define M6812_INDEXED_FLAGS (M6812_OP_IDX|M6812_OP_IDX_1|M6812_OP_IDX_2) |
| /* Analyze the 68HC12 indexed byte. */ |
| if (format & M6812_INDEXED_FLAGS) |
| { |
| int indirect; |
| bfd_vma endaddr; |
| |
| endaddr = memaddr + pos + 1; |
| if (format & M6811_OP_IND16) |
| endaddr += 2; |
| pc_src_offset = -1; |
| pc_dst_offset = 1; |
| status = print_indexed_operand (memaddr + pos, info, &indirect, |
| (format & M6812_DST_MOVE), |
| pc_src_offset, endaddr); |
| if (status < 0) |
| { |
| return status; |
| } |
| pos += status; |
| |
| /* The indirect addressing mode of the call instruction does |
| not need the page code. */ |
| if ((format & M6812_OP_PAGE) && indirect) |
| format &= ~M6812_OP_PAGE; |
| } |
| |
| /* 68HC12 dbcc/ibcc/tbcc operands. */ |
| if ((format & M6812_OP_REG) && (format & M6811_OP_JUMP_REL)) |
| { |
| status = read_memory (memaddr + pos, &buffer[0], 2, info); |
| if (status != 0) |
| { |
| return status; |
| } |
| (*info->fprintf_func) (info->stream, "%s,", |
| reg_src_table[buffer[0] & 0x07]); |
| sval = buffer[1] & 0x0ff; |
| if (buffer[0] & 0x10) |
| sval |= 0xff00; |
| |
| pos += 2; |
| (*info->print_address_func) (memaddr + pos + sval, info); |
| format &= ~(M6812_OP_REG | M6811_OP_JUMP_REL); |
| } |
| else if (format & (M6812_OP_REG | M6812_OP_REG_2)) |
| { |
| status = read_memory (memaddr + pos, &buffer[0], 1, info); |
| if (status != 0) |
| { |
| return status; |
| } |
| |
| pos++; |
| (*info->fprintf_func) (info->stream, "%s,%s", |
| reg_src_table[(buffer[0] >> 4) & 7], |
| reg_dst_table[(buffer[0] & 7)]); |
| } |
| |
| if (format & (M6811_OP_IMM16 | M6811_OP_IND16)) |
| { |
| int val; |
| bfd_vma addr; |
| unsigned page = 0; |
| |
| status = read_memory (memaddr + pos + offset, &buffer[0], 2, info); |
| if (status != 0) |
| { |
| return status; |
| } |
| if (format & M6812_OP_IDX_P2) |
| offset = -2; |
| else |
| offset = 0; |
| pos += 2; |
| |
| val = ((buffer[0] << 8) | (buffer[1] & 0x0FF)); |
| val &= 0x0FFFF; |
| addr = val; |
| pc_dst_offset = 2; |
| if (format & M6812_OP_PAGE) |
| { |
| status = read_memory (memaddr + pos + offset, buffer, 1, info); |
| if (status != 0) |
| return status; |
| |
| page = (unsigned) buffer[0]; |
| if (addr >= M68HC12_BANK_BASE && addr < 0x0c000) |
| addr = ((val - M68HC12_BANK_BASE) |
| | (page << M68HC12_BANK_SHIFT)) |
| + M68HC12_BANK_VIRT; |
| } |
| else if ((arch & cpu6812) |
| && addr >= M68HC12_BANK_BASE && addr < 0x0c000) |
| { |
| int cur_page; |
| bfd_vma vaddr; |
| |
| if (memaddr >= M68HC12_BANK_VIRT) |
| cur_page = ((memaddr - M68HC12_BANK_VIRT) |
| >> M68HC12_BANK_SHIFT); |
| else |
| cur_page = 0; |
| |
| vaddr = ((addr - M68HC12_BANK_BASE) |
| + (cur_page << M68HC12_BANK_SHIFT)) |
| + M68HC12_BANK_VIRT; |
| if (!info->symbol_at_address_func (addr, info) |
| && info->symbol_at_address_func (vaddr, info)) |
| addr = vaddr; |
| } |
| if (format & M6811_OP_IMM16) |
| { |
| format &= ~M6811_OP_IMM16; |
| (*info->fprintf_func) (info->stream, "#"); |
| } |
| else |
| format &= ~M6811_OP_IND16; |
| |
| (*info->print_address_func) (addr, info); |
| if (format & M6812_OP_PAGE) |
| { |
| (* info->fprintf_func) (info->stream, " {"); |
| (* info->print_address_func) (val, info); |
| (* info->fprintf_func) (info->stream, ", %d}", page); |
| format &= ~M6812_OP_PAGE; |
| pos += 1; |
| } |
| } |
| |
| if (format & M6812_OP_IDX_P2) |
| { |
| (*info->fprintf_func) (info->stream, ", "); |
| status = print_indexed_operand (memaddr + pos + offset, info, |
| 0, 1, pc_dst_offset, |
| memaddr + pos + offset + 1); |
| if (status < 0) |
| return status; |
| pos += status; |
| } |
| |
| if (format & M6812_OP_IND16_P2) |
| { |
| int val; |
| |
| (*info->fprintf_func) (info->stream, ", "); |
| |
| status = read_memory (memaddr + pos + offset, &buffer[0], 2, info); |
| if (status != 0) |
| { |
| return status; |
| } |
| pos += 2; |
| |
| val = ((buffer[0] << 8) | (buffer[1] & 0x0FF)); |
| val &= 0x0FFFF; |
| (*info->print_address_func) (val, info); |
| } |
| |
| /* M6811_OP_BITMASK and M6811_OP_JUMP_REL must be treated separately |
| and in that order. The brset/brclr insn have a bitmask and then |
| a relative branch offset. */ |
| if (format & M6811_OP_BITMASK) |
| { |
| status = read_memory (memaddr + pos, &buffer[0], 1, info); |
| if (status != 0) |
| { |
| return status; |
| } |
| pos++; |
| (*info->fprintf_func) (info->stream, " #$%02x%s", |
| buffer[0] & 0x0FF, |
| (format & M6811_OP_JUMP_REL ? " " : "")); |
| format &= ~M6811_OP_BITMASK; |
| } |
| if (format & M6811_OP_JUMP_REL) |
| { |
| int val; |
| |
| status = read_memory (memaddr + pos, &buffer[0], 1, info); |
| if (status != 0) |
| { |
| return status; |
| } |
| |
| pos++; |
| val = (buffer[0] & 0x80) ? buffer[0] | 0xFFFFFF00 : buffer[0]; |
| (*info->print_address_func) (memaddr + pos + val, info); |
| format &= ~M6811_OP_JUMP_REL; |
| } |
| else if (format & M6812_OP_JUMP_REL16) |
| { |
| int val; |
| |
| status = read_memory (memaddr + pos, &buffer[0], 2, info); |
| if (status != 0) |
| { |
| return status; |
| } |
| |
| pos += 2; |
| val = ((buffer[0] << 8) | (buffer[1] & 0x0FF)); |
| if (val & 0x8000) |
| val |= 0xffff0000; |
| |
| (*info->print_address_func) (memaddr + pos + val, info); |
| format &= ~M6812_OP_JUMP_REL16; |
| } |
| |
| if (format & M6812_OP_PAGE) |
| { |
| int val; |
| |
| status = read_memory (memaddr + pos + offset, &buffer[0], 1, info); |
| if (status != 0) |
| { |
| return status; |
| } |
| pos += 1; |
| |
| val = buffer[0] & 0x0ff; |
| (*info->fprintf_func) (info->stream, ", %d", val); |
| } |
| |
| #ifdef DEBUG |
| /* Consistency check. 'format' must be 0, so that we have handled |
| all formats; and the computed size of the insn must match the |
| opcode table content. */ |
| if (format & ~(M6811_OP_PAGE4 | M6811_OP_PAGE3 | M6811_OP_PAGE2)) |
| { |
| (*info->fprintf_func) (info->stream, "; Error, format: %lx", format); |
| } |
| if (pos != opcode->size) |
| { |
| (*info->fprintf_func) (info->stream, "; Error, size: %ld expect %d", |
| pos, opcode->size); |
| } |
| #endif |
| return pos; |
| } |
| |
| /* Opcode not recognized. */ |
| if (format == M6811_OP_PAGE2 && arch & cpu6812 |
| && ((code >= 0x30 && code <= 0x39) || (code >= 0x40))) |
| (*info->fprintf_func) (info->stream, "trap\t#%d", code & 0x0ff); |
| |
| else if (format == M6811_OP_PAGE2) |
| (*info->fprintf_func) (info->stream, ".byte\t0x%02x, 0x%02x", |
| M6811_OPCODE_PAGE2, code); |
| else if (format == M6811_OP_PAGE3) |
| (*info->fprintf_func) (info->stream, ".byte\t0x%02x, 0x%02x", |
| M6811_OPCODE_PAGE3, code); |
| else if (format == M6811_OP_PAGE4) |
| (*info->fprintf_func) (info->stream, ".byte\t0x%02x, 0x%02x", |
| M6811_OPCODE_PAGE4, code); |
| else |
| (*info->fprintf_func) (info->stream, ".byte\t0x%02x", code); |
| |
| return pos; |
| } |
| |
| /* Disassemble one instruction at address 'memaddr'. Returns the number |
| of bytes used by that instruction. */ |
| int |
| print_insn_m68hc11 (bfd_vma memaddr, struct disassemble_info* info) |
| { |
| return print_insn (memaddr, info, cpu6811); |
| } |
| |
| int |
| print_insn_m68hc12 (bfd_vma memaddr, struct disassemble_info* info) |
| { |
| return print_insn (memaddr, info, cpu6812); |
| } |