| # Copyright 1998-2018 Free Software Foundation, Inc. | |
| # This program is free software; you can redistribute it and/or modify | |
| # it under the terms of the GNU General Public License as published by | |
| # the Free Software Foundation; either version 3 of the License, or | |
| # (at your option) any later version. | |
| # | |
| # This program is distributed in the hope that it will be useful, | |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| # GNU General Public License for more details. | |
| # | |
| # You should have received a copy of the GNU General Public License | |
| # along with this program. If not, see <http://www.gnu.org/licenses/>. */ | |
| standard_testfile average.c sum.c | |
| if {[build_executable $testfile.exp $testfile \ | |
| [list $srcfile $srcfile2] debug] == -1} { | |
| untested "failed to compile" | |
| return -1 | |
| } | |
| # | |
| # start gdb -- start gdb running, default procedure | |
| # | |
| proc dbx_gdb_start { } { | |
| global verbose | |
| global GDB | |
| global INTERNAL_GDBFLAGS GDBFLAGS | |
| global prompt | |
| global spawn_id | |
| global timeout | |
| verbose "Spawning $GDB -dbx $INTERNAL_GDBFLAGS $GDBFLAGS" | |
| if { [which $GDB] == 0 } then { | |
| perror "$GDB does not exist." | |
| exit 1 | |
| } | |
| set oldtimeout $timeout | |
| set timeout [expr "$timeout + 60"] | |
| eval "spawn $GDB -dbx $INTERNAL_GDBFLAGS $GDBFLAGS" | |
| gdb_expect { | |
| -re ".*\r\n$gdb_prompt $" { | |
| verbose "GDB initialized." | |
| } | |
| -re "$prompt $" { | |
| perror "GDB never initialized." | |
| return -1 | |
| } | |
| timeout { | |
| perror "(timeout) GDB never initialized." | |
| return -1 | |
| } | |
| } | |
| set timeout $oldtimeout | |
| # force the height to "unlimited", so no pagers get used | |
| send_gdb "set height 0\n" | |
| gdb_expect { | |
| -re ".*$prompt $" { | |
| verbose "Setting height to 0." 2 | |
| } | |
| timeout { | |
| warning "Couldn't set the height to 0." | |
| } | |
| } | |
| # force the width to "unlimited", so no wraparound occurs | |
| send_gdb "set width 0\n" | |
| gdb_expect { | |
| -re ".*$prompt $" { | |
| verbose "Setting width to 0." 2 | |
| } | |
| timeout { | |
| warning "Couldn't set the width to 0." | |
| } | |
| } | |
| } | |
| proc dbx_reinitialize_dir { subdir } { | |
| global gdb_prompt | |
| send_gdb "use\n" | |
| gdb_expect { | |
| -re "Reinitialize source path to empty.*y or n. " { | |
| send_gdb "y\n" | |
| gdb_expect { | |
| -re "Source directories searched.*$gdb_prompt $" { | |
| send_gdb "use $subdir\n" | |
| gdb_expect { | |
| -re "Source directories searched.*$gdb_prompt $" { | |
| verbose "Dir set to $subdir" | |
| } | |
| -re ".*$gdb_prompt $" { | |
| perror "Dir \"$subdir\" failed." | |
| } | |
| } | |
| } | |
| -re ".*$gdb_prompt $" { | |
| perror "Dir \"$subdir\" failed." | |
| } | |
| } | |
| } | |
| -re ".*$gdb_prompt $" { | |
| perror "Dir \"$subdir\" failed." | |
| } | |
| } | |
| } | |
| # In "testsuite/config/unix-gdb.exp", the routine "gdb_load" | |
| # is defined as "gdb_file_cmd". The binding of "gdb_file_cmd" | |
| # is done at invocation time. Before this file is processed, | |
| # it binds to the definition in "testsuite/lib/gdb.exp"; after | |
| # this file is processed, it binds to this definition. | |
| # TCL lets us overrides a previous routine definition without a | |
| # warning (isn't that special?). | |
| # | |
| # This means that tests before use "file" to load a target, and | |
| # tests afterwards use the pair "symbol-file" "exec-file". | |
| # | |
| # I'm leaving it as it is for now because at the moment it | |
| # is the only test we have of the use of the combination of | |
| # "symbol-file" and "exec-file" to load a debugging target (the | |
| # other definition uses "file". | |
| # | |
| # Symbol-file and exec-file should be tested explicitly, not | |
| # as a side effect of running a particular test (in this case, | |
| # "testsuite/gdb.compat/dbx.exp"). | |
| # | |
| # CM: Renamed the procedure so it does not override the orginal file name. | |
| # Having the test suite change behavior depending on the tests run makes | |
| # it extremely difficult to reproduce errors. I've also added a | |
| # "dbx_gdb_load" procedure. This and only this test will call these | |
| # procedures now. I also added an "expect" to the "send exec-file" line. | |
| # The "expect" waits for a prompt to appear. Otherwise, if the tests run | |
| # too quickly, the caller could send another command before the prompt | |
| # of this command returns, causing the test to get out of sync and fail | |
| # seemingly randomly or only on a loaded system. | |
| # | |
| # Problem is, though, that the testsuite config files can override the definition of | |
| # gdb_load (without notice, as was mentioned above). Unfortunately, the gdb_load proc | |
| # that was copied into this test was a copy of the unix native version. | |
| # | |
| # The real problem that we're attempting to solve is how to load an exec and symbol | |
| # file into gdb for a dbx session. So why not just override gdb_file_cmd with the | |
| # right sequence of events, allowing gdb_load to do its normal thing? This way | |
| # remotes and simulators will work, too. | |
| # | |
| # [drow 2002-03-30]: We can restore the old gdb_file_cmd afterwards, though. | |
| set old_gdb_file_cmd_args [info args gdb_file_cmd] | |
| set old_gdb_file_cmd_body [info body gdb_file_cmd] | |
| proc gdb_file_cmd {arg} { | |
| global verbose | |
| global loadpath | |
| global loadfile | |
| global GDB | |
| global gdb_prompt | |
| global spawn_id | |
| upvar timeout timeout | |
| global last_loaded_file | |
| set last_loaded_file $arg | |
| if [is_remote host] { | |
| set arg [remote_download host $arg] | |
| if { $arg == "" } { | |
| error "download failed" | |
| return -1 | |
| } | |
| } | |
| send_gdb "symbol-file $arg\n" | |
| gdb_expect { | |
| -re "Reading symbols from.*done.*$gdb_prompt $" { | |
| verbose "\t\tLoaded $arg into the $GDB" | |
| send_gdb "exec-file $arg\n" | |
| gdb_expect { | |
| -re "A program is being debugged already.*Kill it.*y or n. $" { | |
| send_gdb "y\n" | |
| verbose "\t\tKilling previous program being debugged" | |
| exp_continue | |
| } | |
| -re ".*$gdb_prompt $" { | |
| verbose "\t\tLoaded $arg with new symbol table into $GDB" | |
| return 0 | |
| } | |
| timeout { | |
| perror "(timeout) Couldn't load $arg" | |
| return -1 | |
| } | |
| } | |
| return 0 | |
| } | |
| -re "has no symbol-table.*$gdb_prompt $" { | |
| perror "$arg wasn't compiled with \"-g\"" | |
| return -1 | |
| } | |
| -re "Load new symbol table from \".*\".*y or n. $" { | |
| send_gdb "y\n" | |
| exp_continue | |
| } | |
| -re ".*No such file or directory.*$gdb_prompt $" { | |
| perror "($arg) No such file or directory\n" | |
| return -1 | |
| } | |
| -re "$gdb_prompt $" { | |
| perror "couldn't load $arg into $GDB." | |
| return -1 | |
| } | |
| timeout { | |
| perror "couldn't load $arg into $GDB (timed out)." | |
| return -1 | |
| } | |
| eof { | |
| # This is an attempt to detect a core dump, but seems not to | |
| # work. Perhaps we need to match .* followed by eof, in which | |
| # expect does not seem to have a way to do that. | |
| perror "couldn't load $arg into $GDB (end of file)." | |
| return -1 | |
| } | |
| } | |
| } | |
| # | |
| #test_breakpoints | |
| # | |
| proc test_breakpoints { } { | |
| set stop_line [gdb_get_line_number "stop-in-main"] | |
| gdb_test "stop in main" "Breakpoint.*at.*: file.*average\.c, line $stop_line\." | |
| gdb_test "status" "Num.*Type.*Disp.*Enb.*Address.*What\r\n1\[ \r\]+breakpoint\[ \r\]+keep y.*in main at.*average\.c:$stop_line.*" | |
| set stop_line [gdb_get_line_number "stop-at-call"] | |
| gdb_test "stop at average.c:$stop_line" "Breakpoint.*at.*: file.*average\.c, line $stop_line.*" | |
| gdb_test "stop in average.c:$stop_line" "Usage: stop in <function . address>" | |
| gdb_test "stop at main" "Usage: stop at <line>" | |
| } | |
| # | |
| #test_assign | |
| # | |
| proc test_assign { } { | |
| global decimal | |
| global gdb_prompt | |
| gdb_run_cmd | |
| set test "running to main" | |
| gdb_test_multiple "" $test { | |
| -re "Break.* at .*:$decimal.*$gdb_prompt $" { | |
| pass $test | |
| } | |
| -re "Breakpoint \[0-9\]*, \[0-9xa-f\]* in .*$gdb_prompt $" { | |
| pass $test | |
| } | |
| } | |
| send_gdb "assign first=1\n" | |
| gdb_expect { | |
| -re "No symbol \"first\" in current context.*$" { fail "assign first" } | |
| -re "$gdb_prompt $" { pass "assign first" } | |
| timeout { fail "assign first (timeout)" } | |
| } | |
| gdb_test "print first" ".1 = 1" | |
| } | |
| # | |
| #test_whereis | |
| # | |
| proc test_whereis { } { | |
| gdb_test "whereis my_list" "All variables matching regular expression \"my_list\":\r\n\r\nFile.*average\.c:\r\nstatic int my_list\\\[10\\\];" | |
| } | |
| # | |
| #test_func | |
| # | |
| proc test_func { } { | |
| global decimal | |
| global srcfile2 | |
| gdb_test "cont" ".*" "cont 1" | |
| gdb_test "step" ".*" | |
| gdb_test "func sum" "'sum' not within current stack frame\." | |
| set stop_line [gdb_get_line_number "stop-in-sum" $srcfile2] | |
| gdb_test "stop in sum" "Breakpoint.*at.*: file.*sum\.c, line $stop_line\." | |
| gdb_test "cont" ".*" "cont 2" | |
| gdb_test "func print_average" ".*in print_average.*\\(list=.*, low=0, high=6\\).*at.*average\.c:${decimal}\r\n${decimal}\[ \t\]+total = sum\\(list, low, high\\);" | |
| } | |
| # Start with a fresh gdb. | |
| gdb_exit | |
| global GDBFLAGS | |
| set saved_gdbflags $GDBFLAGS | |
| set GDBFLAGS "$GDBFLAGS --dbx" | |
| gdb_start | |
| dbx_reinitialize_dir $srcdir/$subdir | |
| gdb_load ${binfile} | |
| test_breakpoints | |
| test_assign | |
| test_whereis | |
| gdb_test "file average.c:1" "1\[ \t\]+/. This is a sample program.*" | |
| test_func | |
| #exit and cleanup | |
| gdb_exit | |
| set GDBFLAGS $saved_gdbflags | |
| eval proc gdb_file_cmd {$old_gdb_file_cmd_args} {$old_gdb_file_cmd_body} | |
| return 0 |