| /* This file is part of the program GDB, the GNU debugger. | |
| Copyright (C) 1998-2018 Free Software Foundation, Inc. | |
| Contributed by Cygnus Solutions. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| */ | |
| #include "sim-main.h" | |
| #include "hw-main.h" | |
| /* DEVICE | |
| tx3904tmr - tx3904 timer | |
| DESCRIPTION | |
| Implements one tx3904 timer/counter described in the tx3904 | |
| user guide. Three instances are required for TMR0, TMR1, and | |
| TMR3 within the tx3904, at different base addresses. | |
| Both internal and system clocks are synthesized as divided versions | |
| of the simulator clock. | |
| There is no support for: | |
| - edge sensitivity of external clock | |
| - different mode restrictions for TMR0..2 | |
| - level interrupts (interrupts are treated as events that occur at edges) | |
| PROPERTIES | |
| reg <base> <length> | |
| Base of TMR control register bank. <length> must equal 0x100. | |
| Register offsets: 0: TCR: timer control register | |
| 4: TISR: timer interrupt status register | |
| 8: CPRA: compare register A | |
| 12: CPRB: compare register B | |
| 16: ITMR: interval timer mode register | |
| 32: CCDR: divider register | |
| 48: PMGR: pulse generator mode register | |
| 64: WTMR: watchdog timer mode register | |
| 240: TRR: timer read register | |
| clock <ticks> | |
| Rate of timer clock signal. This number is the number of simulator | |
| ticks per clock signal tick. Default 1. | |
| ext <ticks> | |
| Rate of "external input clock signal", the other clock input of the | |
| timer. It uses the same scale as above. Default 100. | |
| PORTS | |
| int (output) | |
| Interrupt port. An event is generated when a timer interrupt | |
| occurs. | |
| ff (output) | |
| Flip-flop output, corresponds to the TMFFOUT port. An event is | |
| generated when flip-flop changes value. The integer associated | |
| with the event is 1/0 according to flip-flop value. | |
| reset (input) | |
| Reset port. | |
| */ | |
| /* static functions */ | |
| static void deliver_tx3904tmr_tick (struct hw *me, void *data); | |
| /* register numbers; each is one word long */ | |
| enum | |
| { | |
| TCR_REG = 0, | |
| TISR_REG = 1, | |
| CPRA_REG = 2, | |
| CPRB_REG = 3, | |
| ITMR_REG = 4, | |
| CCDR_REG = 8, | |
| PMGR_REG = 12, | |
| WTMR_REG = 16, | |
| TRR_REG = 60 | |
| }; | |
| /* port ID's */ | |
| enum | |
| { | |
| RESET_PORT, | |
| INT_PORT, | |
| FF_PORT | |
| }; | |
| static const struct hw_port_descriptor tx3904tmr_ports[] = | |
| { | |
| { "int", INT_PORT, 0, output_port, }, | |
| { "ff", FF_PORT, 0, output_port, }, | |
| { "reset", RESET_PORT, 0, input_port, }, | |
| { NULL, }, | |
| }; | |
| /* The timer/counter register internal state. Note that we store | |
| state using the control register images, in host endian order. */ | |
| struct tx3904tmr { | |
| address_word base_address; /* control register base */ | |
| unsigned_4 clock_ticks, ext_ticks; /* clock frequencies */ | |
| signed_8 last_ticks; /* time at last deliver_*_tick call */ | |
| signed_8 roundoff_ticks; /* sim ticks unprocessed during last tick call */ | |
| int ff; /* pulse generator flip-flop value: 1/0 */ | |
| struct hw_event* event; /* last scheduled event */ | |
| unsigned_4 tcr; | |
| #define GET_TCR_TCE(c) (((c)->tcr & 0x80) >> 7) | |
| #define GET_TCR_CCDE(c) (((c)->tcr & 0x40) >> 6) | |
| #define GET_TCR_CRE(c) (((c)->tcr & 0x20) >> 5) | |
| #define GET_TCR_CCS(c) (((c)->tcr & 0x04) >> 2) | |
| #define GET_TCR_TMODE(c) (((c)->tcr & 0x03) >> 0) | |
| unsigned_4 tisr; | |
| #define SET_TISR_TWIS(c) ((c)->tisr |= 0x08) | |
| #define SET_TISR_TPIBS(c) ((c)->tisr |= 0x04) | |
| #define SET_TISR_TPIAS(c) ((c)->tisr |= 0x02) | |
| #define SET_TISR_TIIS(c) ((c)->tisr |= 0x01) | |
| unsigned_4 cpra; | |
| unsigned_4 cprb; | |
| unsigned_4 itmr; | |
| #define GET_ITMR_TIIE(c) (((c)->itmr & 0x8000) >> 15) | |
| #define SET_ITMR_TIIE(c,v) BLIT32((c)->itmr, 15, (v) ? 1 : 0) | |
| #define GET_ITMR_TZCE(c) (((c)->itmr & 0x0001) >> 0) | |
| #define SET_ITMR_TZCE(c,v) BLIT32((c)->itmr, 0, (v) ? 1 : 0) | |
| unsigned_4 ccdr; | |
| #define GET_CCDR_CDR(c) (((c)->ccdr & 0x07) >> 0) | |
| unsigned_4 pmgr; | |
| #define GET_PMGR_TPIBE(c) (((c)->pmgr & 0x8000) >> 15) | |
| #define SET_PMGR_TPIBE(c,v) BLIT32((c)->pmgr, 15, (v) ? 1 : 0) | |
| #define GET_PMGR_TPIAE(c) (((c)->pmgr & 0x4000) >> 14) | |
| #define SET_PMGR_TPIAE(c,v) BLIT32((c)->pmgr, 14, (v) ? 1 : 0) | |
| #define GET_PMGR_FFI(c) (((c)->pmgr & 0x0001) >> 0) | |
| #define SET_PMGR_FFI(c,v) BLIT32((c)->pmgr, 0, (v) ? 1 : 0) | |
| unsigned_4 wtmr; | |
| #define GET_WTMR_TWIE(c) (((c)->wtmr & 0x8000) >> 15) | |
| #define SET_WTMR_TWIE(c,v) BLIT32((c)->wtmr, 15, (v) ? 1 : 0) | |
| #define GET_WTMR_WDIS(c) (((c)->wtmr & 0x0080) >> 7) | |
| #define SET_WTMR_WDIS(c,v) BLIT32((c)->wtmr, 7, (v) ? 1 : 0) | |
| #define GET_WTMR_TWC(c) (((c)->wtmr & 0x0001) >> 0) | |
| #define SET_WTMR_TWC(c,v) BLIT32((c)->wtmr, 0, (v) ? 1 : 0) | |
| unsigned_4 trr; | |
| }; | |
| /* Finish off the partially created hw device. Attach our local | |
| callbacks. Wire up our port names etc */ | |
| static hw_io_read_buffer_method tx3904tmr_io_read_buffer; | |
| static hw_io_write_buffer_method tx3904tmr_io_write_buffer; | |
| static hw_port_event_method tx3904tmr_port_event; | |
| static void | |
| attach_tx3904tmr_regs (struct hw *me, | |
| struct tx3904tmr *controller) | |
| { | |
| unsigned_word attach_address; | |
| int attach_space; | |
| unsigned attach_size; | |
| reg_property_spec reg; | |
| if (hw_find_property (me, "reg") == NULL) | |
| hw_abort (me, "Missing \"reg\" property"); | |
| if (!hw_find_reg_array_property (me, "reg", 0, ®)) | |
| hw_abort (me, "\"reg\" property must contain one addr/size entry"); | |
| hw_unit_address_to_attach_address (hw_parent (me), | |
| ®.address, | |
| &attach_space, | |
| &attach_address, | |
| me); | |
| hw_unit_size_to_attach_size (hw_parent (me), | |
| ®.size, | |
| &attach_size, me); | |
| hw_attach_address (hw_parent (me), 0, | |
| attach_space, attach_address, attach_size, | |
| me); | |
| if(hw_find_property(me, "clock") != NULL) | |
| controller->clock_ticks = (unsigned_4) hw_find_integer_property(me, "clock"); | |
| if(hw_find_property(me, "ext") != NULL) | |
| controller->ext_ticks = (unsigned_4) hw_find_integer_property(me, "ext"); | |
| controller->base_address = attach_address; | |
| } | |
| static void | |
| tx3904tmr_finish (struct hw *me) | |
| { | |
| struct tx3904tmr *controller; | |
| controller = HW_ZALLOC (me, struct tx3904tmr); | |
| set_hw_data (me, controller); | |
| set_hw_io_read_buffer (me, tx3904tmr_io_read_buffer); | |
| set_hw_io_write_buffer (me, tx3904tmr_io_write_buffer); | |
| set_hw_ports (me, tx3904tmr_ports); | |
| set_hw_port_event (me, tx3904tmr_port_event); | |
| /* Preset clock dividers */ | |
| controller->clock_ticks = 1; | |
| controller->ext_ticks = 100; | |
| /* Attach ourself to our parent bus */ | |
| attach_tx3904tmr_regs (me, controller); | |
| /* Initialize to reset state */ | |
| controller->tcr = | |
| controller->itmr = | |
| controller->ccdr = | |
| controller->pmgr = | |
| controller->wtmr = | |
| controller->tisr = | |
| controller->trr = 0; | |
| controller->cpra = controller->cprb = 0x00FFFFFF; | |
| controller->ff = 0; | |
| controller->last_ticks = controller->roundoff_ticks = 0; | |
| controller->event = NULL; | |
| } | |
| /* An event arrives on an interrupt port */ | |
| static void | |
| tx3904tmr_port_event (struct hw *me, | |
| int my_port, | |
| struct hw *source, | |
| int source_port, | |
| int level) | |
| { | |
| struct tx3904tmr *controller = hw_data (me); | |
| switch (my_port) | |
| { | |
| case RESET_PORT: | |
| { | |
| HW_TRACE ((me, "reset")); | |
| /* preset flip-flop to FFI value */ | |
| controller->ff = GET_PMGR_FFI(controller); | |
| controller->tcr = | |
| controller->itmr = | |
| controller->ccdr = | |
| controller->pmgr = | |
| controller->wtmr = | |
| controller->tisr = | |
| controller->trr = 0; | |
| controller->cpra = controller->cprb = 0x00FFFFFF; | |
| controller->last_ticks = controller->roundoff_ticks = 0; | |
| if(controller->event != NULL) | |
| hw_event_queue_deschedule(me, controller->event); | |
| controller->event = NULL; | |
| break; | |
| } | |
| default: | |
| hw_abort (me, "Event on unknown port %d", my_port); | |
| break; | |
| } | |
| } | |
| /* generic read/write */ | |
| static unsigned | |
| tx3904tmr_io_read_buffer (struct hw *me, | |
| void *dest, | |
| int space, | |
| unsigned_word base, | |
| unsigned nr_bytes) | |
| { | |
| struct tx3904tmr *controller = hw_data (me); | |
| unsigned byte; | |
| HW_TRACE ((me, "read 0x%08lx %d", (long) base, (int) nr_bytes)); | |
| for (byte = 0; byte < nr_bytes; byte++) | |
| { | |
| address_word address = base + byte; | |
| int reg_number = (address - controller->base_address) / 4; | |
| int reg_offset = 3 - (address - controller->base_address) % 4; | |
| unsigned_4 register_value; /* in target byte order */ | |
| /* fill in entire register_value word */ | |
| switch (reg_number) | |
| { | |
| case TCR_REG: register_value = controller->tcr; break; | |
| case TISR_REG: register_value = controller->tisr; break; | |
| case CPRA_REG: register_value = controller->cpra; break; | |
| case CPRB_REG: register_value = controller->cprb; break; | |
| case ITMR_REG: register_value = controller->itmr; break; | |
| case CCDR_REG: register_value = controller->ccdr; break; | |
| case PMGR_REG: register_value = controller->pmgr; break; | |
| case WTMR_REG: register_value = controller->wtmr; break; | |
| case TRR_REG: register_value = controller->trr; break; | |
| default: register_value = 0; | |
| } | |
| /* write requested byte out */ | |
| memcpy ((char*) dest + byte, ((char*)& register_value)+reg_offset, 1); | |
| } | |
| return nr_bytes; | |
| } | |
| static unsigned | |
| tx3904tmr_io_write_buffer (struct hw *me, | |
| const void *source, | |
| int space, | |
| unsigned_word base, | |
| unsigned nr_bytes) | |
| { | |
| struct tx3904tmr *controller = hw_data (me); | |
| unsigned byte; | |
| HW_TRACE ((me, "write 0x%08lx %d", (long) base, (int) nr_bytes)); | |
| for (byte = 0; byte < nr_bytes; byte++) | |
| { | |
| address_word address = base + byte; | |
| unsigned_1 write_byte = ((const char*) source)[byte]; | |
| int reg_number = (address - controller->base_address) / 4; | |
| int reg_offset = 3 - (address - controller->base_address) % 4; | |
| /* fill in entire register_value word */ | |
| switch (reg_number) | |
| { | |
| case TCR_REG: | |
| if(reg_offset == 0) /* first byte */ | |
| { | |
| /* update register, but mask out NOP bits */ | |
| controller->tcr = (unsigned_4) (write_byte & 0xef); | |
| /* Reset counter value if timer suspended and CRE is set. */ | |
| if(GET_TCR_TCE(controller) == 0 && | |
| GET_TCR_CRE(controller) == 1) | |
| controller->trr = 0; | |
| } | |
| /* HW_TRACE ((me, "tcr: %08lx", (long) controller->tcr)); */ | |
| break; | |
| case ITMR_REG: | |
| if(reg_offset == 1) /* second byte */ | |
| { | |
| SET_ITMR_TIIE(controller, write_byte & 0x80); | |
| } | |
| else if(reg_offset == 0) /* first byte */ | |
| { | |
| SET_ITMR_TZCE(controller, write_byte & 0x01); | |
| } | |
| /* HW_TRACE ((me, "itmr: %08lx", (long) controller->itmr)); */ | |
| break; | |
| case CCDR_REG: | |
| if(reg_offset == 0) /* first byte */ | |
| { | |
| controller->ccdr = write_byte & 0x07; | |
| } | |
| /* HW_TRACE ((me, "ccdr: %08lx", (long) controller->ccdr)); */ | |
| break; | |
| case PMGR_REG: | |
| if(reg_offset == 1) /* second byte */ | |
| { | |
| SET_PMGR_TPIBE(controller, write_byte & 0x80); | |
| SET_PMGR_TPIAE(controller, write_byte & 0x40); | |
| } | |
| else if(reg_offset == 0) /* first byte */ | |
| { | |
| SET_PMGR_FFI(controller, write_byte & 0x01); | |
| } | |
| /* HW_TRACE ((me, "pmgr: %08lx", (long) controller->pmgr)); */ | |
| break; | |
| case WTMR_REG: | |
| if(reg_offset == 1) /* second byte */ | |
| { | |
| SET_WTMR_TWIE(controller, write_byte & 0x80); | |
| } | |
| else if(reg_offset == 0) /* first byte */ | |
| { | |
| SET_WTMR_WDIS(controller, write_byte & 0x80); | |
| SET_WTMR_TWC(controller, write_byte & 0x01); | |
| } | |
| /* HW_TRACE ((me, "wtmr: %08lx", (long) controller->wtmr)); */ | |
| break; | |
| case TISR_REG: | |
| if(reg_offset == 0) /* first byte */ | |
| { | |
| /* All bits must be zero in given byte, according to | |
| spec. */ | |
| /* Send an "interrupt off" event on the interrupt port */ | |
| if(controller->tisr != 0) /* any interrupts active? */ | |
| { | |
| hw_port_event(me, INT_PORT, 0); | |
| } | |
| /* clear interrupt status register */ | |
| controller->tisr = 0; | |
| } | |
| /* HW_TRACE ((me, "tisr: %08lx", (long) controller->tisr)); */ | |
| break; | |
| case CPRA_REG: | |
| if(reg_offset < 3) /* first, second, or third byte */ | |
| { | |
| MBLIT32(controller->cpra, (reg_offset*8)+7, (reg_offset*8), write_byte); | |
| } | |
| /* HW_TRACE ((me, "cpra: %08lx", (long) controller->cpra)); */ | |
| break; | |
| case CPRB_REG: | |
| if(reg_offset < 3) /* first, second, or third byte */ | |
| { | |
| MBLIT32(controller->cprb, (reg_offset*8)+7, (reg_offset*8), write_byte); | |
| } | |
| /* HW_TRACE ((me, "cprb: %08lx", (long) controller->cprb)); */ | |
| break; | |
| default: | |
| HW_TRACE ((me, "write to illegal register %d", reg_number)); | |
| } | |
| } /* loop over bytes */ | |
| /* Schedule a timer event in near future, so we can increment or | |
| stop the counter, to respond to register updates. */ | |
| hw_event_queue_schedule(me, 1, deliver_tx3904tmr_tick, NULL); | |
| return nr_bytes; | |
| } | |
| /* Deliver a clock tick to the counter. */ | |
| static void | |
| deliver_tx3904tmr_tick (struct hw *me, | |
| void *data) | |
| { | |
| struct tx3904tmr *controller = hw_data (me); | |
| SIM_DESC sd = hw_system (me); | |
| signed_8 this_ticks = sim_events_time(sd); | |
| signed_8 warp; | |
| signed_8 divisor; | |
| signed_8 quotient, remainder; | |
| /* compute simulation ticks between last tick and this tick */ | |
| if(controller->last_ticks != 0) | |
| warp = this_ticks - controller->last_ticks + controller->roundoff_ticks; | |
| else | |
| { | |
| controller->last_ticks = this_ticks; /* initialize */ | |
| warp = controller->roundoff_ticks; | |
| } | |
| if(controller->event != NULL) | |
| hw_event_queue_deschedule(me, controller->event); | |
| controller->event = NULL; | |
| /* Check whether the timer ticking is enabled at this moment. This | |
| largely a function of the TCE bit, but is also slightly | |
| mode-dependent. */ | |
| switch((int) GET_TCR_TMODE(controller)) | |
| { | |
| case 0: /* interval */ | |
| /* do not advance counter if TCE = 0 or if holding at count = CPRA */ | |
| if(GET_TCR_TCE(controller) == 0 || | |
| controller->trr == controller->cpra) | |
| return; | |
| break; | |
| case 1: /* pulse generator */ | |
| /* do not advance counter if TCE = 0 */ | |
| if(GET_TCR_TCE(controller) == 0) | |
| return; | |
| break; | |
| case 2: /* watchdog */ | |
| /* do not advance counter if TCE = 0 and WDIS = 1 */ | |
| if(GET_TCR_TCE(controller) == 0 && | |
| GET_WTMR_WDIS(controller) == 1) | |
| return; | |
| break; | |
| case 3: /* disabled */ | |
| /* regardless of TCE, do not advance counter */ | |
| return; | |
| } | |
| /* In any of the above cases that return, a subsequent register | |
| write will be needed to restart the timer. A tick event is | |
| scheduled by any register write, so it is more efficient not to | |
| reschedule dummy events here. */ | |
| /* find appropriate divisor etc. */ | |
| if(GET_TCR_CCS(controller) == 0) /* internal system clock */ | |
| { | |
| /* apply internal clock divider */ | |
| if(GET_TCR_CCDE(controller)) /* divisor circuit enabled? */ | |
| divisor = controller->clock_ticks * (1 << (1 + GET_CCDR_CDR(controller))); | |
| else | |
| divisor = controller->clock_ticks; | |
| } | |
| else | |
| { | |
| divisor = controller->ext_ticks; | |
| } | |
| /* how many times to increase counter? */ | |
| quotient = warp / divisor; | |
| remainder = warp % divisor; | |
| /* NOTE: If the event rescheduling code works properly, the quotient | |
| should never be larger than 1. That is, we should receive events | |
| here at least as frequently as the simulated counter is supposed | |
| to decrement. So the remainder (-> roundoff_ticks) will slowly | |
| accumulate, with the quotient == 0. Once in a while, quotient | |
| will equal 1. */ | |
| controller->roundoff_ticks = remainder; | |
| controller->last_ticks = this_ticks; | |
| while(quotient > 0) /* Is it time to increment counter? */ | |
| { | |
| /* next 24-bit counter value */ | |
| unsigned_4 next_trr = (controller->trr + 1) % (1 << 24); | |
| quotient --; | |
| switch((int) GET_TCR_TMODE(controller)) | |
| { | |
| case 0: /* interval timer mode */ | |
| { | |
| /* Current or next counter value matches CPRA value? The | |
| first case covers counter holding at maximum before | |
| reset. The second case covers normal counting | |
| behavior. */ | |
| if(controller->trr == controller->cpra || | |
| next_trr == controller->cpra) | |
| { | |
| /* likely hold CPRA value */ | |
| if(controller->trr == controller->cpra) | |
| next_trr = controller->cpra; | |
| SET_TISR_TIIS(controller); | |
| /* Signal an interrupt if it is enabled with TIIE, | |
| and if we just arrived at CPRA. Don't repeatedly | |
| interrupt if holding due to TZCE=0 */ | |
| if(GET_ITMR_TIIE(controller) && | |
| next_trr != controller->trr) | |
| { | |
| hw_port_event(me, INT_PORT, 1); | |
| } | |
| /* Reset counter? */ | |
| if(GET_ITMR_TZCE(controller)) | |
| { | |
| next_trr = 0; | |
| } | |
| } | |
| } | |
| break; | |
| case 1: /* pulse generator mode */ | |
| { | |
| /* first trip point */ | |
| if(next_trr == controller->cpra) | |
| { | |
| /* flip flip-flop & report */ | |
| controller->ff ^= 1; | |
| hw_port_event(me, FF_PORT, controller->ff); | |
| SET_TISR_TPIAS(controller); | |
| /* signal interrupt */ | |
| if(GET_PMGR_TPIAE(controller)) | |
| { | |
| hw_port_event(me, INT_PORT, 1); | |
| } | |
| } | |
| /* second trip point */ | |
| else if(next_trr == controller->cprb) | |
| { | |
| /* flip flip-flop & report */ | |
| controller->ff ^= 1; | |
| hw_port_event(me, FF_PORT, controller->ff); | |
| SET_TISR_TPIBS(controller); | |
| /* signal interrupt */ | |
| if(GET_PMGR_TPIBE(controller)) | |
| { | |
| hw_port_event(me, INT_PORT, 1); | |
| } | |
| /* clear counter */ | |
| next_trr = 0; | |
| } | |
| } | |
| break; | |
| case 2: /* watchdog timer mode */ | |
| { | |
| /* watchdog timer expiry */ | |
| if(next_trr == controller->cpra) | |
| { | |
| SET_TISR_TWIS(controller); | |
| /* signal interrupt */ | |
| if(GET_WTMR_TWIE(controller)) | |
| { | |
| hw_port_event(me, INT_PORT, 1); | |
| } | |
| /* clear counter */ | |
| next_trr = 0; | |
| } | |
| } | |
| break; | |
| case 3: /* disabled */ | |
| default: | |
| break; | |
| } | |
| /* update counter and report */ | |
| controller->trr = next_trr; | |
| /* HW_TRACE ((me, "counter trr %ld tisr %lx", | |
| (long) controller->trr, (long) controller->tisr)); */ | |
| } /* end quotient loop */ | |
| /* Reschedule a timer event in near future, so we can increment the | |
| counter again. Set the event about 75% of divisor time away, so | |
| we will experience roughly 1.3 events per counter increment. */ | |
| controller->event = hw_event_queue_schedule(me, divisor*3/4, deliver_tx3904tmr_tick, NULL); | |
| } | |
| const struct hw_descriptor dv_tx3904tmr_descriptor[] = { | |
| { "tx3904tmr", tx3904tmr_finish, }, | |
| { NULL }, | |
| }; |