| /* interrupts.c -- 68HC11 Interrupts Emulation |
| Copyright 1999-2015 Free Software Foundation, Inc. |
| Written by Stephane Carrez (stcarrez@nerim.fr) |
| |
| This file is part of GDB, GAS, and the GNU binutils. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 3 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ |
| |
| #include "sim-main.h" |
| #include "sim-options.h" |
| |
| static const char *interrupt_names[] = { |
| "R1", |
| "R2", |
| "R3", |
| "R4", |
| "R5", |
| "R6", |
| "R7", |
| "R8", |
| "R9", |
| "R10", |
| "R11", |
| |
| "SCI", |
| "SPI", |
| "AINPUT", |
| "AOVERFLOW", |
| "TOVERFLOW", |
| "OUT5", |
| "OUT4", |
| "OUT3", |
| "OUT2", |
| "OUT1", |
| "INC3", |
| "INC2", |
| "INC1", |
| "RT", |
| "IRQ", |
| "XIRQ", |
| "SWI", |
| "ILL", |
| "COPRESET", |
| "COPFAIL", |
| "RESET" |
| }; |
| |
| struct interrupt_def idefs[] = { |
| /* Serial interrupts. */ |
| { M6811_INT_SCI, M6811_SCSR, M6811_TDRE, M6811_SCCR2, M6811_TIE }, |
| { M6811_INT_SCI, M6811_SCSR, M6811_TC, M6811_SCCR2, M6811_TCIE }, |
| { M6811_INT_SCI, M6811_SCSR, M6811_RDRF, M6811_SCCR2, M6811_RIE }, |
| { M6811_INT_SCI, M6811_SCSR, M6811_IDLE, M6811_SCCR2, M6811_ILIE }, |
| |
| /* SPI interrupts. */ |
| { M6811_INT_SPI, M6811_SPSR, M6811_SPIF, M6811_SPCR, M6811_SPIE }, |
| |
| /* Realtime interrupts. */ |
| { M6811_INT_TCTN, M6811_TFLG2, M6811_TOF, M6811_TMSK2, M6811_TOI }, |
| { M6811_INT_RT, M6811_TFLG2, M6811_RTIF, M6811_TMSK2, M6811_RTII }, |
| |
| /* Output compare interrupts. */ |
| { M6811_INT_OUTCMP1, M6811_TFLG1, M6811_OC1F, M6811_TMSK1, M6811_OC1I }, |
| { M6811_INT_OUTCMP2, M6811_TFLG1, M6811_OC2F, M6811_TMSK1, M6811_OC2I }, |
| { M6811_INT_OUTCMP3, M6811_TFLG1, M6811_OC3F, M6811_TMSK1, M6811_OC3I }, |
| { M6811_INT_OUTCMP4, M6811_TFLG1, M6811_OC4F, M6811_TMSK1, M6811_OC4I }, |
| { M6811_INT_OUTCMP5, M6811_TFLG1, M6811_OC5F, M6811_TMSK1, M6811_OC5I }, |
| |
| /* Input compare interrupts. */ |
| { M6811_INT_INCMP1, M6811_TFLG1, M6811_IC1F, M6811_TMSK1, M6811_IC1I }, |
| { M6811_INT_INCMP2, M6811_TFLG1, M6811_IC2F, M6811_TMSK1, M6811_IC2I }, |
| { M6811_INT_INCMP3, M6811_TFLG1, M6811_IC3F, M6811_TMSK1, M6811_IC3I }, |
| |
| /* Pulse accumulator. */ |
| { M6811_INT_AINPUT, M6811_TFLG2, M6811_PAIF, M6811_TMSK2, M6811_PAII }, |
| { M6811_INT_AOVERFLOW,M6811_TFLG2, M6811_PAOVF, M6811_TMSK2, M6811_PAOVI}, |
| #if 0 |
| { M6811_INT_COPRESET, M6811_CONFIG, M6811_NOCOP, 0, 0 }, |
| { M6811_INT_COPFAIL, M6811_CONFIG, M6811_NOCOP, 0, 0 } |
| #endif |
| }; |
| |
| #define TableSize(X) (sizeof X / sizeof(X[0])) |
| #define CYCLES_MAX ((((signed64) 1) << 62) - 1) |
| |
| enum |
| { |
| OPTION_INTERRUPT_INFO = OPTION_START, |
| OPTION_INTERRUPT_CATCH, |
| OPTION_INTERRUPT_CLEAR |
| }; |
| |
| static DECLARE_OPTION_HANDLER (interrupt_option_handler); |
| |
| static const OPTION interrupt_options[] = |
| { |
| { {"interrupt-info", no_argument, NULL, OPTION_INTERRUPT_INFO }, |
| '\0', NULL, "Print information about interrupts", |
| interrupt_option_handler }, |
| { {"interrupt-catch", required_argument, NULL, OPTION_INTERRUPT_CATCH }, |
| '\0', "NAME[,MODE]", |
| "Catch interrupts when they are raised or taken\n" |
| "NAME Name of the interrupt\n" |
| "MODE Optional mode (`taken' or `raised')", |
| interrupt_option_handler }, |
| { {"interrupt-clear", required_argument, NULL, OPTION_INTERRUPT_CLEAR }, |
| '\0', "NAME", "No longer catch the interrupt", |
| interrupt_option_handler }, |
| |
| { {NULL, no_argument, NULL, 0}, '\0', NULL, NULL, NULL } |
| }; |
| |
| /* Initialize the interrupts module. */ |
| void |
| interrupts_initialize (SIM_DESC sd, struct _sim_cpu *proc) |
| { |
| struct interrupts *interrupts = &proc->cpu_interrupts; |
| |
| interrupts->cpu = proc; |
| |
| sim_add_option_table (sd, 0, interrupt_options); |
| } |
| |
| /* Initialize the interrupts of the processor. */ |
| void |
| interrupts_reset (struct interrupts *interrupts) |
| { |
| int i; |
| |
| interrupts->pending_mask = 0; |
| if (interrupts->cpu->cpu_mode & M6811_SMOD) |
| interrupts->vectors_addr = 0xbfc0; |
| else |
| interrupts->vectors_addr = 0xffc0; |
| interrupts->nb_interrupts_raised = 0; |
| interrupts->min_mask_cycles = CYCLES_MAX; |
| interrupts->max_mask_cycles = 0; |
| interrupts->last_mask_cycles = 0; |
| interrupts->start_mask_cycle = -1; |
| interrupts->xirq_start_mask_cycle = -1; |
| interrupts->xirq_max_mask_cycles = 0; |
| interrupts->xirq_min_mask_cycles = CYCLES_MAX; |
| interrupts->xirq_last_mask_cycles = 0; |
| |
| for (i = 0; i < M6811_INT_NUMBER; i++) |
| { |
| interrupts->interrupt_order[i] = i; |
| } |
| |
| /* Clear the interrupt history table. */ |
| interrupts->history_index = 0; |
| memset (interrupts->interrupts_history, 0, |
| sizeof (interrupts->interrupts_history)); |
| |
| memset (interrupts->interrupts, 0, |
| sizeof (interrupts->interrupts)); |
| |
| /* In bootstrap mode, initialize the vector table to point |
| to the RAM location. */ |
| if (interrupts->cpu->cpu_mode == M6811_SMOD) |
| { |
| bfd_vma addr = interrupts->vectors_addr; |
| uint16 vector = 0x0100 - 3 * (M6811_INT_NUMBER - 1); |
| for (i = 0; i < M6811_INT_NUMBER; i++) |
| { |
| memory_write16 (interrupts->cpu, addr, vector); |
| addr += 2; |
| vector += 3; |
| } |
| } |
| } |
| |
| static int |
| find_interrupt (const char *name) |
| { |
| int i; |
| |
| if (name) |
| for (i = 0; i < M6811_INT_NUMBER; i++) |
| if (strcasecmp (name, interrupt_names[i]) == 0) |
| return i; |
| |
| return -1; |
| } |
| |
| static SIM_RC |
| interrupt_option_handler (SIM_DESC sd, sim_cpu *cpu, |
| int opt, char *arg, int is_command) |
| { |
| char *p; |
| int mode; |
| int id; |
| struct interrupts *interrupts; |
| |
| if (cpu == 0) |
| cpu = STATE_CPU (sd, 0); |
| |
| interrupts = &cpu->cpu_interrupts; |
| switch (opt) |
| { |
| case OPTION_INTERRUPT_INFO: |
| for (id = 0; id < M6811_INT_NUMBER; id++) |
| { |
| sim_io_eprintf (sd, "%-10.10s ", interrupt_names[id]); |
| switch (interrupts->interrupts[id].stop_mode) |
| { |
| case SIM_STOP_WHEN_RAISED: |
| sim_io_eprintf (sd, "catch raised "); |
| break; |
| |
| case SIM_STOP_WHEN_TAKEN: |
| sim_io_eprintf (sd, "catch taken "); |
| break; |
| |
| case SIM_STOP_WHEN_RAISED | SIM_STOP_WHEN_TAKEN: |
| sim_io_eprintf (sd, "catch all "); |
| break; |
| |
| default: |
| sim_io_eprintf (sd, " "); |
| break; |
| } |
| sim_io_eprintf (sd, "%ld\n", |
| interrupts->interrupts[id].raised_count); |
| } |
| break; |
| |
| case OPTION_INTERRUPT_CATCH: |
| p = strchr (arg, ','); |
| if (p) |
| *p++ = 0; |
| |
| mode = SIM_STOP_WHEN_RAISED; |
| id = find_interrupt (arg); |
| if (id < 0) |
| sim_io_eprintf (sd, "Interrupt name not recognized: %s\n", arg); |
| |
| if (p && strcasecmp (p, "raised") == 0) |
| mode = SIM_STOP_WHEN_RAISED; |
| else if (p && strcasecmp (p, "taken") == 0) |
| mode = SIM_STOP_WHEN_TAKEN; |
| else if (p && strcasecmp (p, "all") == 0) |
| mode = SIM_STOP_WHEN_RAISED | SIM_STOP_WHEN_TAKEN; |
| else if (p) |
| { |
| sim_io_eprintf (sd, "Invalid argument: %s\n", p); |
| break; |
| } |
| if (id >= 0) |
| interrupts->interrupts[id].stop_mode = mode; |
| break; |
| |
| case OPTION_INTERRUPT_CLEAR: |
| mode = SIM_STOP_WHEN_RAISED; |
| id = find_interrupt (arg); |
| if (id < 0) |
| sim_io_eprintf (sd, "Interrupt name not recognized: %s\n", arg); |
| else |
| interrupts->interrupts[id].stop_mode = 0; |
| break; |
| } |
| |
| return SIM_RC_OK; |
| } |
| |
| /* Update the mask of pending interrupts. This operation must be called |
| when the state of some 68HC11 IO register changes. It looks the |
| different registers that indicate a pending interrupt (timer, SCI, SPI, |
| ...) and records the interrupt if it's there and enabled. */ |
| void |
| interrupts_update_pending (struct interrupts *interrupts) |
| { |
| int i; |
| uint8 *ioregs; |
| unsigned long clear_mask; |
| unsigned long set_mask; |
| |
| clear_mask = 0; |
| set_mask = 0; |
| ioregs = &interrupts->cpu->ios[0]; |
| |
| for (i = 0; i < TableSize(idefs); i++) |
| { |
| struct interrupt_def *idef = &idefs[i]; |
| uint8 data; |
| |
| /* Look if the interrupt is enabled. */ |
| if (idef->enable_paddr) |
| { |
| data = ioregs[idef->enable_paddr]; |
| if (!(data & idef->enabled_mask)) |
| { |
| /* Disable it. */ |
| clear_mask |= (1 << idef->int_number); |
| continue; |
| } |
| } |
| |
| /* Interrupt is enabled, see if it's there. */ |
| data = ioregs[idef->int_paddr]; |
| if (!(data & idef->int_mask)) |
| { |
| /* Disable it. */ |
| clear_mask |= (1 << idef->int_number); |
| continue; |
| } |
| |
| /* Ok, raise it. */ |
| set_mask |= (1 << idef->int_number); |
| } |
| |
| /* Some interrupts are shared (M6811_INT_SCI) so clear |
| the interrupts before setting the new ones. */ |
| interrupts->pending_mask &= ~clear_mask; |
| interrupts->pending_mask |= set_mask; |
| |
| /* Keep track of when the interrupt is raised by the device. |
| Also implements the breakpoint-on-interrupt. */ |
| if (set_mask) |
| { |
| signed64 cycle = cpu_current_cycle (interrupts->cpu); |
| int must_stop = 0; |
| |
| for (i = 0; i < M6811_INT_NUMBER; i++) |
| { |
| if (!(set_mask & (1 << i))) |
| continue; |
| |
| interrupts->interrupts[i].cpu_cycle = cycle; |
| if (interrupts->interrupts[i].stop_mode & SIM_STOP_WHEN_RAISED) |
| { |
| must_stop = 1; |
| sim_io_printf (CPU_STATE (interrupts->cpu), |
| "Interrupt %s raised\n", |
| interrupt_names[i]); |
| } |
| } |
| if (must_stop) |
| sim_engine_halt (CPU_STATE (interrupts->cpu), |
| interrupts->cpu, |
| 0, cpu_get_pc (interrupts->cpu), |
| sim_stopped, |
| SIM_SIGTRAP); |
| } |
| } |
| |
| |
| /* Finds the current active and non-masked interrupt. |
| Returns the interrupt number (index in the vector table) or -1 |
| if no interrupt can be serviced. */ |
| int |
| interrupts_get_current (struct interrupts *interrupts) |
| { |
| int i; |
| |
| if (interrupts->pending_mask == 0) |
| return -1; |
| |
| /* SWI and illegal instructions are simulated by an interrupt. |
| They are not maskable. */ |
| if (interrupts->pending_mask & (1 << M6811_INT_SWI)) |
| { |
| interrupts->pending_mask &= ~(1 << M6811_INT_SWI); |
| return M6811_INT_SWI; |
| } |
| if (interrupts->pending_mask & (1 << M6811_INT_ILLEGAL)) |
| { |
| interrupts->pending_mask &= ~(1 << M6811_INT_ILLEGAL); |
| return M6811_INT_ILLEGAL; |
| } |
| |
| /* If there is a non maskable interrupt, go for it (unless we are masked |
| by the X-bit. */ |
| if (interrupts->pending_mask & (1 << M6811_INT_XIRQ)) |
| { |
| if (cpu_get_ccr_X (interrupts->cpu) == 0) |
| { |
| interrupts->pending_mask &= ~(1 << M6811_INT_XIRQ); |
| return M6811_INT_XIRQ; |
| } |
| return -1; |
| } |
| |
| /* Interrupts are masked, do nothing. */ |
| if (cpu_get_ccr_I (interrupts->cpu) == 1) |
| { |
| return -1; |
| } |
| |
| /* Returns the first interrupt number which is pending. |
| The interrupt priority is specified by the table `interrupt_order'. |
| For these interrupts, the pending mask is cleared when the program |
| performs some actions on the corresponding device. If the device |
| is not reset, the interrupt remains and will be re-raised when |
| we return from the interrupt (see 68HC11 pink book). */ |
| for (i = 0; i < M6811_INT_NUMBER; i++) |
| { |
| enum M6811_INT int_number = interrupts->interrupt_order[i]; |
| |
| if (interrupts->pending_mask & (1 << int_number)) |
| { |
| return int_number; |
| } |
| } |
| return -1; |
| } |
| |
| |
| /* Process the current interrupt if there is one. This operation must |
| be called after each instruction to handle the interrupts. If interrupts |
| are masked, it does nothing. */ |
| int |
| interrupts_process (struct interrupts *interrupts) |
| { |
| int id; |
| uint8 ccr; |
| |
| /* See if interrupts are enabled/disabled and keep track of the |
| number of cycles the interrupts are masked. Such information is |
| then reported by the info command. */ |
| ccr = cpu_get_ccr (interrupts->cpu); |
| if (ccr & M6811_I_BIT) |
| { |
| if (interrupts->start_mask_cycle < 0) |
| interrupts->start_mask_cycle = cpu_current_cycle (interrupts->cpu); |
| } |
| else if (interrupts->start_mask_cycle >= 0 |
| && (ccr & M6811_I_BIT) == 0) |
| { |
| signed64 t = cpu_current_cycle (interrupts->cpu); |
| |
| t -= interrupts->start_mask_cycle; |
| if (t < interrupts->min_mask_cycles) |
| interrupts->min_mask_cycles = t; |
| if (t > interrupts->max_mask_cycles) |
| interrupts->max_mask_cycles = t; |
| interrupts->start_mask_cycle = -1; |
| interrupts->last_mask_cycles = t; |
| } |
| if (ccr & M6811_X_BIT) |
| { |
| if (interrupts->xirq_start_mask_cycle < 0) |
| interrupts->xirq_start_mask_cycle |
| = cpu_current_cycle (interrupts->cpu); |
| } |
| else if (interrupts->xirq_start_mask_cycle >= 0 |
| && (ccr & M6811_X_BIT) == 0) |
| { |
| signed64 t = cpu_current_cycle (interrupts->cpu); |
| |
| t -= interrupts->xirq_start_mask_cycle; |
| if (t < interrupts->xirq_min_mask_cycles) |
| interrupts->xirq_min_mask_cycles = t; |
| if (t > interrupts->xirq_max_mask_cycles) |
| interrupts->xirq_max_mask_cycles = t; |
| interrupts->xirq_start_mask_cycle = -1; |
| interrupts->xirq_last_mask_cycles = t; |
| } |
| |
| id = interrupts_get_current (interrupts); |
| if (id >= 0) |
| { |
| uint16 addr; |
| struct interrupt_history *h; |
| |
| /* Implement the breakpoint-on-interrupt. */ |
| if (interrupts->interrupts[id].stop_mode & SIM_STOP_WHEN_TAKEN) |
| { |
| sim_io_printf (CPU_STATE (interrupts->cpu), |
| "Interrupt %s will be handled\n", |
| interrupt_names[id]); |
| sim_engine_halt (CPU_STATE (interrupts->cpu), |
| interrupts->cpu, |
| 0, cpu_get_pc (interrupts->cpu), |
| sim_stopped, |
| SIM_SIGTRAP); |
| } |
| |
| cpu_push_all (interrupts->cpu); |
| addr = memory_read16 (interrupts->cpu, |
| interrupts->vectors_addr + id * 2); |
| cpu_call (interrupts->cpu, addr); |
| |
| /* Now, protect from nested interrupts. */ |
| if (id == M6811_INT_XIRQ) |
| { |
| cpu_set_ccr_X (interrupts->cpu, 1); |
| } |
| else |
| { |
| cpu_set_ccr_I (interrupts->cpu, 1); |
| } |
| |
| /* Update the interrupt history table. */ |
| h = &interrupts->interrupts_history[interrupts->history_index]; |
| h->type = id; |
| h->taken_cycle = cpu_current_cycle (interrupts->cpu); |
| h->raised_cycle = interrupts->interrupts[id].cpu_cycle; |
| |
| if (interrupts->history_index >= MAX_INT_HISTORY-1) |
| interrupts->history_index = 0; |
| else |
| interrupts->history_index++; |
| |
| interrupts->nb_interrupts_raised++; |
| cpu_add_cycles (interrupts->cpu, 14); |
| return 1; |
| } |
| return 0; |
| } |
| |
| void |
| interrupts_raise (struct interrupts *interrupts, enum M6811_INT number) |
| { |
| interrupts->pending_mask |= (1 << number); |
| interrupts->nb_interrupts_raised ++; |
| } |
| |
| void |
| interrupts_info (SIM_DESC sd, struct interrupts *interrupts) |
| { |
| signed64 t, prev_interrupt; |
| int i; |
| |
| sim_io_printf (sd, "Interrupts Info:\n"); |
| sim_io_printf (sd, " Interrupts raised: %lu\n", |
| interrupts->nb_interrupts_raised); |
| |
| if (interrupts->start_mask_cycle >= 0) |
| { |
| t = cpu_current_cycle (interrupts->cpu); |
| |
| t -= interrupts->start_mask_cycle; |
| if (t > interrupts->max_mask_cycles) |
| interrupts->max_mask_cycles = t; |
| |
| sim_io_printf (sd, " Current interrupts masked sequence: %s\n", |
| cycle_to_string (interrupts->cpu, t, |
| PRINT_TIME | PRINT_CYCLE)); |
| } |
| t = interrupts->min_mask_cycles == CYCLES_MAX ? |
| interrupts->max_mask_cycles : |
| interrupts->min_mask_cycles; |
| sim_io_printf (sd, " Shortest interrupts masked sequence: %s\n", |
| cycle_to_string (interrupts->cpu, t, |
| PRINT_TIME | PRINT_CYCLE)); |
| |
| t = interrupts->max_mask_cycles; |
| sim_io_printf (sd, " Longest interrupts masked sequence: %s\n", |
| cycle_to_string (interrupts->cpu, t, |
| PRINT_TIME | PRINT_CYCLE)); |
| |
| t = interrupts->last_mask_cycles; |
| sim_io_printf (sd, " Last interrupts masked sequence: %s\n", |
| cycle_to_string (interrupts->cpu, t, |
| PRINT_TIME | PRINT_CYCLE)); |
| |
| if (interrupts->xirq_start_mask_cycle >= 0) |
| { |
| t = cpu_current_cycle (interrupts->cpu); |
| |
| t -= interrupts->xirq_start_mask_cycle; |
| if (t > interrupts->xirq_max_mask_cycles) |
| interrupts->xirq_max_mask_cycles = t; |
| |
| sim_io_printf (sd, " XIRQ Current interrupts masked sequence: %s\n", |
| cycle_to_string (interrupts->cpu, t, |
| PRINT_TIME | PRINT_CYCLE)); |
| } |
| |
| t = interrupts->xirq_min_mask_cycles == CYCLES_MAX ? |
| interrupts->xirq_max_mask_cycles : |
| interrupts->xirq_min_mask_cycles; |
| sim_io_printf (sd, " XIRQ Min interrupts masked sequence: %s\n", |
| cycle_to_string (interrupts->cpu, t, |
| PRINT_TIME | PRINT_CYCLE)); |
| |
| t = interrupts->xirq_max_mask_cycles; |
| sim_io_printf (sd, " XIRQ Max interrupts masked sequence: %s\n", |
| cycle_to_string (interrupts->cpu, t, |
| PRINT_TIME | PRINT_CYCLE)); |
| |
| t = interrupts->xirq_last_mask_cycles; |
| sim_io_printf (sd, " XIRQ Last interrupts masked sequence: %s\n", |
| cycle_to_string (interrupts->cpu, t, |
| PRINT_TIME | PRINT_CYCLE)); |
| |
| if (interrupts->pending_mask) |
| { |
| sim_io_printf (sd, " Pending interrupts : "); |
| for (i = 0; i < M6811_INT_NUMBER; i++) |
| { |
| enum M6811_INT int_number = interrupts->interrupt_order[i]; |
| |
| if (interrupts->pending_mask & (1 << int_number)) |
| { |
| sim_io_printf (sd, "%s ", interrupt_names[int_number]); |
| } |
| } |
| sim_io_printf (sd, "\n"); |
| } |
| |
| prev_interrupt = 0; |
| sim_io_printf (sd, "N Interrupt Cycle Taken Latency" |
| " Delta between interrupts\n"); |
| for (i = 0; i < MAX_INT_HISTORY; i++) |
| { |
| int which; |
| struct interrupt_history *h; |
| signed64 dt; |
| |
| which = interrupts->history_index - i - 1; |
| if (which < 0) |
| which += MAX_INT_HISTORY; |
| h = &interrupts->interrupts_history[which]; |
| if (h->taken_cycle == 0) |
| break; |
| |
| dt = h->taken_cycle - h->raised_cycle; |
| sim_io_printf (sd, "%2d %-9.9s %15.15s ", i, |
| interrupt_names[h->type], |
| cycle_to_string (interrupts->cpu, h->taken_cycle, 0)); |
| sim_io_printf (sd, "%15.15s", |
| cycle_to_string (interrupts->cpu, dt, 0)); |
| if (prev_interrupt) |
| { |
| dt = prev_interrupt - h->taken_cycle; |
| sim_io_printf (sd, " %s", |
| cycle_to_string (interrupts->cpu, dt, PRINT_TIME)); |
| } |
| sim_io_printf (sd, "\n"); |
| prev_interrupt = h->taken_cycle; |
| } |
| } |
