| /* Altera Nios II disassemble routines |
| Copyright (C) 2012-2016 Free Software Foundation, Inc. |
| Contributed by Nigel Gray (ngray@altera.com). |
| Contributed by Mentor Graphics, Inc. |
| |
| This file is part of the GNU opcodes library. |
| |
| This library is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 3, or (at your option) |
| any later version. |
| |
| It is distributed in the hope that it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public |
| License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this file; see the file COPYING. If not, write to the |
| Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston, |
| MA 02110-1301, USA. */ |
| |
| #include "sysdep.h" |
| #include "dis-asm.h" |
| #include "opcode/nios2.h" |
| #include "libiberty.h" |
| #include <string.h> |
| #include <assert.h> |
| |
| /* No symbol table is available when this code runs out in an embedded |
| system as when it is used for disassembler support in a monitor. */ |
| #if !defined(EMBEDDED_ENV) |
| #define SYMTAB_AVAILABLE 1 |
| #include "elf-bfd.h" |
| #include "elf/nios2.h" |
| #endif |
| |
| /* Default length of Nios II instruction in bytes. */ |
| #define INSNLEN 4 |
| |
| /* Data structures used by the opcode hash table. */ |
| typedef struct _nios2_opcode_hash |
| { |
| const struct nios2_opcode *opcode; |
| struct _nios2_opcode_hash *next; |
| } nios2_opcode_hash; |
| |
| /* Hash table size. */ |
| #define OPCODE_HASH_SIZE (IW_R1_OP_UNSHIFTED_MASK + 1) |
| |
| /* Extract the opcode from an instruction word. */ |
| static unsigned int |
| nios2_r1_extract_opcode (unsigned int x) |
| { |
| return GET_IW_R1_OP (x); |
| } |
| |
| static unsigned int |
| nios2_r2_extract_opcode (unsigned int x) |
| { |
| return GET_IW_R2_OP (x); |
| } |
| |
| /* We maintain separate hash tables for R1 and R2 opcodes, and pseudo-ops |
| are stored in a different table than regular instructions. */ |
| |
| typedef struct _nios2_disassembler_state |
| { |
| const struct nios2_opcode *opcodes; |
| const int *num_opcodes; |
| unsigned int (*extract_opcode) (unsigned int); |
| nios2_opcode_hash *hash[OPCODE_HASH_SIZE]; |
| nios2_opcode_hash *ps_hash[OPCODE_HASH_SIZE]; |
| const struct nios2_opcode *nop; |
| bfd_boolean init; |
| } nios2_disassembler_state; |
| |
| static nios2_disassembler_state |
| nios2_r1_disassembler_state = { |
| nios2_r1_opcodes, |
| &nios2_num_r1_opcodes, |
| nios2_r1_extract_opcode, |
| {}, |
| {}, |
| NULL, |
| 0 |
| }; |
| |
| static nios2_disassembler_state |
| nios2_r2_disassembler_state = { |
| nios2_r2_opcodes, |
| &nios2_num_r2_opcodes, |
| nios2_r2_extract_opcode, |
| {}, |
| {}, |
| NULL, |
| 0 |
| }; |
| |
| /* Function to initialize the opcode hash table. */ |
| static void |
| nios2_init_opcode_hash (nios2_disassembler_state *state) |
| { |
| unsigned int i; |
| register const struct nios2_opcode *op; |
| |
| for (i = 0; i < OPCODE_HASH_SIZE; i++) |
| for (op = state->opcodes; op < &state->opcodes[*(state->num_opcodes)]; op++) |
| { |
| nios2_opcode_hash *new_hash; |
| nios2_opcode_hash **bucket = NULL; |
| |
| if ((op->pinfo & NIOS2_INSN_MACRO) == NIOS2_INSN_MACRO) |
| { |
| if (i == state->extract_opcode (op->match) |
| && (op->pinfo & (NIOS2_INSN_MACRO_MOV | NIOS2_INSN_MACRO_MOVI) |
| & 0x7fffffff)) |
| { |
| bucket = &(state->ps_hash[i]); |
| if (strcmp (op->name, "nop") == 0) |
| state->nop = op; |
| } |
| } |
| else if (i == state->extract_opcode (op->match)) |
| bucket = &(state->hash[i]); |
| |
| if (bucket) |
| { |
| new_hash = |
| (nios2_opcode_hash *) malloc (sizeof (nios2_opcode_hash)); |
| if (new_hash == NULL) |
| { |
| fprintf (stderr, |
| "error allocating memory...broken disassembler\n"); |
| abort (); |
| } |
| new_hash->opcode = op; |
| new_hash->next = NULL; |
| while (*bucket) |
| bucket = &((*bucket)->next); |
| *bucket = new_hash; |
| } |
| } |
| state->init = 1; |
| |
| #ifdef DEBUG_HASHTABLE |
| for (i = 0; i < OPCODE_HASH_SIZE; ++i) |
| { |
| nios2_opcode_hash *tmp_hash = state->hash[i]; |
| printf ("index: 0x%02X ops: ", i); |
| while (tmp_hash != NULL) |
| { |
| printf ("%s ", tmp_hash->opcode->name); |
| tmp_hash = tmp_hash->next; |
| } |
| printf ("\n"); |
| } |
| |
| for (i = 0; i < OPCODE_HASH_SIZE; ++i) |
| { |
| nios2_opcode_hash *tmp_hash = state->ps_hash[i]; |
| printf ("index: 0x%02X ops: ", i); |
| while (tmp_hash != NULL) |
| { |
| printf ("%s ", tmp_hash->opcode->name); |
| tmp_hash = tmp_hash->next; |
| } |
| printf ("\n"); |
| } |
| #endif /* DEBUG_HASHTABLE */ |
| } |
| |
| /* Return a pointer to an nios2_opcode struct for a given instruction |
| word OPCODE for bfd machine MACH, or NULL if there is an error. */ |
| const struct nios2_opcode * |
| nios2_find_opcode_hash (unsigned long opcode, unsigned long mach) |
| { |
| nios2_opcode_hash *entry; |
| nios2_disassembler_state *state; |
| |
| /* Select the right instruction set, hash tables, and opcode accessor |
| for the mach variant. */ |
| if (mach == bfd_mach_nios2r2) |
| state = &nios2_r2_disassembler_state; |
| else |
| state = &nios2_r1_disassembler_state; |
| |
| /* Build a hash table to shorten the search time. */ |
| if (!state->init) |
| nios2_init_opcode_hash (state); |
| |
| /* Check for NOP first. Both NOP and MOV are macros that expand into |
| an ADD instruction, and we always want to give priority to NOP. */ |
| if (state->nop->match == (opcode & state->nop->mask)) |
| return state->nop; |
| |
| /* First look in the pseudo-op hashtable. */ |
| for (entry = state->ps_hash[state->extract_opcode (opcode)]; |
| entry; entry = entry->next) |
| if (entry->opcode->match == (opcode & entry->opcode->mask)) |
| return entry->opcode; |
| |
| /* Otherwise look in the main hashtable. */ |
| for (entry = state->hash[state->extract_opcode (opcode)]; |
| entry; entry = entry->next) |
| if (entry->opcode->match == (opcode & entry->opcode->mask)) |
| return entry->opcode; |
| |
| return NULL; |
| } |
| |
| /* There are 32 regular registers, 32 coprocessor registers, |
| and 32 control registers. */ |
| #define NUMREGNAMES 32 |
| |
| /* Return a pointer to the base of the coprocessor register name array. */ |
| static struct nios2_reg * |
| nios2_coprocessor_regs (void) |
| { |
| static struct nios2_reg *cached = NULL; |
| |
| if (!cached) |
| { |
| int i; |
| for (i = NUMREGNAMES; i < nios2_num_regs; i++) |
| if (!strcmp (nios2_regs[i].name, "c0")) |
| { |
| cached = nios2_regs + i; |
| break; |
| } |
| assert (cached); |
| } |
| return cached; |
| } |
| |
| /* Return a pointer to the base of the control register name array. */ |
| static struct nios2_reg * |
| nios2_control_regs (void) |
| { |
| static struct nios2_reg *cached = NULL; |
| |
| if (!cached) |
| { |
| int i; |
| for (i = NUMREGNAMES; i < nios2_num_regs; i++) |
| if (!strcmp (nios2_regs[i].name, "status")) |
| { |
| cached = nios2_regs + i; |
| break; |
| } |
| assert (cached); |
| } |
| return cached; |
| } |
| |
| /* Helper routine to report internal errors. */ |
| static void |
| bad_opcode (const struct nios2_opcode *op) |
| { |
| fprintf (stderr, "Internal error: broken opcode descriptor for `%s %s'\n", |
| op->name, op->args); |
| abort (); |
| } |
| |
| /* The function nios2_print_insn_arg uses the character pointed |
| to by ARGPTR to determine how it print the next token or separator |
| character in the arguments to an instruction. */ |
| static int |
| nios2_print_insn_arg (const char *argptr, |
| unsigned long opcode, bfd_vma address, |
| disassemble_info *info, |
| const struct nios2_opcode *op) |
| { |
| unsigned long i = 0; |
| struct nios2_reg *reg_base; |
| |
| switch (*argptr) |
| { |
| case ',': |
| case '(': |
| case ')': |
| (*info->fprintf_func) (info->stream, "%c", *argptr); |
| break; |
| |
| case 'c': |
| /* Control register index. */ |
| switch (op->format) |
| { |
| case iw_r_type: |
| i = GET_IW_R_IMM5 (opcode); |
| break; |
| case iw_F3X6L5_type: |
| i = GET_IW_F3X6L5_IMM5 (opcode); |
| break; |
| default: |
| bad_opcode (op); |
| } |
| reg_base = nios2_control_regs (); |
| (*info->fprintf_func) (info->stream, "%s", reg_base[i].name); |
| break; |
| |
| case 'd': |
| reg_base = nios2_regs; |
| switch (op->format) |
| { |
| case iw_r_type: |
| i = GET_IW_R_C (opcode); |
| break; |
| case iw_custom_type: |
| i = GET_IW_CUSTOM_C (opcode); |
| if (GET_IW_CUSTOM_READC (opcode) == 0) |
| reg_base = nios2_coprocessor_regs (); |
| break; |
| case iw_F3X6L5_type: |
| case iw_F3X6_type: |
| i = GET_IW_F3X6L5_C (opcode); |
| break; |
| case iw_F3X8_type: |
| i = GET_IW_F3X8_C (opcode); |
| if (GET_IW_F3X8_READC (opcode) == 0) |
| reg_base = nios2_coprocessor_regs (); |
| break; |
| case iw_F2_type: |
| i = GET_IW_F2_B (opcode); |
| break; |
| default: |
| bad_opcode (op); |
| } |
| if (i < NUMREGNAMES) |
| (*info->fprintf_func) (info->stream, "%s", reg_base[i].name); |
| else |
| (*info->fprintf_func) (info->stream, "unknown"); |
| break; |
| |
| case 's': |
| reg_base = nios2_regs; |
| switch (op->format) |
| { |
| case iw_r_type: |
| i = GET_IW_R_A (opcode); |
| break; |
| case iw_i_type: |
| i = GET_IW_I_A (opcode); |
| break; |
| case iw_custom_type: |
| i = GET_IW_CUSTOM_A (opcode); |
| if (GET_IW_CUSTOM_READA (opcode) == 0) |
| reg_base = nios2_coprocessor_regs (); |
| break; |
| case iw_F2I16_type: |
| i = GET_IW_F2I16_A (opcode); |
| break; |
| case iw_F2X4I12_type: |
| i = GET_IW_F2X4I12_A (opcode); |
| break; |
| case iw_F1X4I12_type: |
| i = GET_IW_F1X4I12_A (opcode); |
| break; |
| case iw_F1X4L17_type: |
| i = GET_IW_F1X4L17_A (opcode); |
| break; |
| case iw_F3X6L5_type: |
| case iw_F3X6_type: |
| i = GET_IW_F3X6L5_A (opcode); |
| break; |
| case iw_F2X6L10_type: |
| i = GET_IW_F2X6L10_A (opcode); |
| break; |
| case iw_F3X8_type: |
| i = GET_IW_F3X8_A (opcode); |
| if (GET_IW_F3X8_READA (opcode) == 0) |
| reg_base = nios2_coprocessor_regs (); |
| break; |
| case iw_F1X1_type: |
| i = GET_IW_F1X1_A (opcode); |
| break; |
| case iw_F1I5_type: |
| i = 27; /* Implicit stack pointer reference. */ |
| break; |
| case iw_F2_type: |
| i = GET_IW_F2_A (opcode); |
| break; |
| default: |
| bad_opcode (op); |
| } |
| if (i < NUMREGNAMES) |
| (*info->fprintf_func) (info->stream, "%s", reg_base[i].name); |
| else |
| (*info->fprintf_func) (info->stream, "unknown"); |
| break; |
| |
| case 't': |
| reg_base = nios2_regs; |
| switch (op->format) |
| { |
| case iw_r_type: |
| i = GET_IW_R_B (opcode); |
| break; |
| case iw_i_type: |
| i = GET_IW_I_B (opcode); |
| break; |
| case iw_custom_type: |
| i = GET_IW_CUSTOM_B (opcode); |
| if (GET_IW_CUSTOM_READB (opcode) == 0) |
| reg_base = nios2_coprocessor_regs (); |
| break; |
| case iw_F2I16_type: |
| i = GET_IW_F2I16_B (opcode); |
| break; |
| case iw_F2X4I12_type: |
| i = GET_IW_F2X4I12_B (opcode); |
| break; |
| case iw_F3X6L5_type: |
| case iw_F3X6_type: |
| i = GET_IW_F3X6L5_B (opcode); |
| break; |
| case iw_F2X6L10_type: |
| i = GET_IW_F2X6L10_B (opcode); |
| break; |
| case iw_F3X8_type: |
| i = GET_IW_F3X8_B (opcode); |
| if (GET_IW_F3X8_READB (opcode) == 0) |
| reg_base = nios2_coprocessor_regs (); |
| break; |
| case iw_F1I5_type: |
| i = GET_IW_F1I5_B (opcode); |
| break; |
| case iw_F2_type: |
| i = GET_IW_F2_B (opcode); |
| break; |
| case iw_T1X1I6_type: |
| i = 0; |
| break; |
| default: |
| bad_opcode (op); |
| } |
| if (i < NUMREGNAMES) |
| (*info->fprintf_func) (info->stream, "%s", reg_base[i].name); |
| else |
| (*info->fprintf_func) (info->stream, "unknown"); |
| break; |
| |
| case 'D': |
| switch (op->format) |
| { |
| case iw_T1I7_type: |
| i = GET_IW_T1I7_A3 (opcode); |
| break; |
| case iw_T2X1L3_type: |
| i = GET_IW_T2X1L3_B3 (opcode); |
| break; |
| case iw_T2X1I3_type: |
| i = GET_IW_T2X1I3_B3 (opcode); |
| break; |
| case iw_T3X1_type: |
| i = GET_IW_T3X1_C3 (opcode); |
| break; |
| case iw_T2X3_type: |
| if (op->num_args == 3) |
| i = GET_IW_T2X3_A3 (opcode); |
| else |
| i = GET_IW_T2X3_B3 (opcode); |
| break; |
| default: |
| bad_opcode (op); |
| } |
| i = nios2_r2_reg3_mappings[i]; |
| (*info->fprintf_func) (info->stream, "%s", nios2_regs[i].name); |
| break; |
| |
| case 'M': |
| /* 6-bit unsigned immediate with no shift. */ |
| switch (op->format) |
| { |
| case iw_T1X1I6_type: |
| i = GET_IW_T1X1I6_IMM6 (opcode); |
| break; |
| default: |
| bad_opcode (op); |
| } |
| (*info->fprintf_func) (info->stream, "%ld", i); |
| break; |
| |
| case 'N': |
| /* 6-bit unsigned immediate with 2-bit shift. */ |
| switch (op->format) |
| { |
| case iw_T1X1I6_type: |
| i = GET_IW_T1X1I6_IMM6 (opcode) << 2; |
| break; |
| default: |
| bad_opcode (op); |
| } |
| (*info->fprintf_func) (info->stream, "%ld", i); |
| break; |
| |
| case 'S': |
| switch (op->format) |
| { |
| case iw_T1I7_type: |
| i = GET_IW_T1I7_A3 (opcode); |
| break; |
| case iw_T2I4_type: |
| i = GET_IW_T2I4_A3 (opcode); |
| break; |
| case iw_T2X1L3_type: |
| i = GET_IW_T2X1L3_A3 (opcode); |
| break; |
| case iw_T2X1I3_type: |
| i = GET_IW_T2X1I3_A3 (opcode); |
| break; |
| case iw_T3X1_type: |
| i = GET_IW_T3X1_A3 (opcode); |
| break; |
| case iw_T2X3_type: |
| i = GET_IW_T2X3_A3 (opcode); |
| break; |
| case iw_T1X1I6_type: |
| i = GET_IW_T1X1I6_A3 (opcode); |
| break; |
| default: |
| bad_opcode (op); |
| } |
| i = nios2_r2_reg3_mappings[i]; |
| (*info->fprintf_func) (info->stream, "%s", nios2_regs[i].name); |
| break; |
| |
| case 'T': |
| switch (op->format) |
| { |
| case iw_T2I4_type: |
| i = GET_IW_T2I4_B3 (opcode); |
| break; |
| case iw_T3X1_type: |
| i = GET_IW_T3X1_B3 (opcode); |
| break; |
| case iw_T2X3_type: |
| i = GET_IW_T2X3_B3 (opcode); |
| break; |
| default: |
| bad_opcode (op); |
| } |
| i = nios2_r2_reg3_mappings[i]; |
| (*info->fprintf_func) (info->stream, "%s", nios2_regs[i].name); |
| break; |
| |
| case 'i': |
| /* 16-bit signed immediate. */ |
| switch (op->format) |
| { |
| case iw_i_type: |
| i = (signed) (GET_IW_I_IMM16 (opcode) << 16) >> 16; |
| break; |
| case iw_F2I16_type: |
| i = (signed) (GET_IW_F2I16_IMM16 (opcode) << 16) >> 16; |
| break; |
| default: |
| bad_opcode (op); |
| } |
| (*info->fprintf_func) (info->stream, "%ld", i); |
| break; |
| |
| case 'I': |
| /* 12-bit signed immediate. */ |
| switch (op->format) |
| { |
| case iw_F2X4I12_type: |
| i = (signed) (GET_IW_F2X4I12_IMM12 (opcode) << 20) >> 20; |
| break; |
| case iw_F1X4I12_type: |
| i = (signed) (GET_IW_F1X4I12_IMM12 (opcode) << 20) >> 20; |
| break; |
| default: |
| bad_opcode (op); |
| } |
| (*info->fprintf_func) (info->stream, "%ld", i); |
| break; |
| |
| case 'u': |
| /* 16-bit unsigned immediate. */ |
| switch (op->format) |
| { |
| case iw_i_type: |
| i = GET_IW_I_IMM16 (opcode); |
| break; |
| case iw_F2I16_type: |
| i = GET_IW_F2I16_IMM16 (opcode); |
| break; |
| default: |
| bad_opcode (op); |
| } |
| (*info->fprintf_func) (info->stream, "%ld", i); |
| break; |
| |
| case 'U': |
| /* 7-bit unsigned immediate with 2-bit shift. */ |
| switch (op->format) |
| { |
| case iw_T1I7_type: |
| i = GET_IW_T1I7_IMM7 (opcode) << 2; |
| break; |
| case iw_X1I7_type: |
| i = GET_IW_X1I7_IMM7 (opcode) << 2; |
| break; |
| default: |
| bad_opcode (op); |
| } |
| (*info->fprintf_func) (info->stream, "%ld", i); |
| break; |
| |
| case 'V': |
| /* 5-bit unsigned immediate with 2-bit shift. */ |
| switch (op->format) |
| { |
| case iw_F1I5_type: |
| i = GET_IW_F1I5_IMM5 (opcode) << 2; |
| break; |
| default: |
| bad_opcode (op); |
| } |
| (*info->fprintf_func) (info->stream, "%ld", i); |
| break; |
| |
| case 'W': |
| /* 4-bit unsigned immediate with 2-bit shift. */ |
| switch (op->format) |
| { |
| case iw_T2I4_type: |
| i = GET_IW_T2I4_IMM4 (opcode) << 2; |
| break; |
| case iw_L5I4X1_type: |
| i = GET_IW_L5I4X1_IMM4 (opcode) << 2; |
| break; |
| default: |
| bad_opcode (op); |
| } |
| (*info->fprintf_func) (info->stream, "%ld", i); |
| break; |
| |
| case 'X': |
| /* 4-bit unsigned immediate with 1-bit shift. */ |
| switch (op->format) |
| { |
| case iw_T2I4_type: |
| i = GET_IW_T2I4_IMM4 (opcode) << 1; |
| break; |
| default: |
| bad_opcode (op); |
| } |
| (*info->fprintf_func) (info->stream, "%ld", i); |
| break; |
| |
| case 'Y': |
| /* 4-bit unsigned immediate without shift. */ |
| switch (op->format) |
| { |
| case iw_T2I4_type: |
| i = GET_IW_T2I4_IMM4 (opcode); |
| break; |
| default: |
| bad_opcode (op); |
| } |
| (*info->fprintf_func) (info->stream, "%ld", i); |
| break; |
| |
| case 'o': |
| /* 16-bit signed immediate address offset. */ |
| switch (op->format) |
| { |
| case iw_i_type: |
| i = (signed) (GET_IW_I_IMM16 (opcode) << 16) >> 16; |
| break; |
| case iw_F2I16_type: |
| i = (signed) (GET_IW_F2I16_IMM16 (opcode) << 16) >> 16; |
| break; |
| default: |
| bad_opcode (op); |
| } |
| address = address + 4 + i; |
| (*info->print_address_func) (address, info); |
| break; |
| |
| case 'O': |
| /* 10-bit signed address offset with 1-bit shift. */ |
| switch (op->format) |
| { |
| case iw_I10_type: |
| i = (signed) (GET_IW_I10_IMM10 (opcode) << 22) >> 21; |
| break; |
| default: |
| bad_opcode (op); |
| } |
| address = address + 2 + i; |
| (*info->print_address_func) (address, info); |
| break; |
| |
| case 'P': |
| /* 7-bit signed address offset with 1-bit shift. */ |
| switch (op->format) |
| { |
| case iw_T1I7_type: |
| i = (signed) (GET_IW_T1I7_IMM7 (opcode) << 25) >> 24; |
| break; |
| default: |
| bad_opcode (op); |
| } |
| address = address + 2 + i; |
| (*info->print_address_func) (address, info); |
| break; |
| |
| case 'j': |
| /* 5-bit unsigned immediate. */ |
| switch (op->format) |
| { |
| case iw_r_type: |
| i = GET_IW_R_IMM5 (opcode); |
| break; |
| case iw_F3X6L5_type: |
| i = GET_IW_F3X6L5_IMM5 (opcode); |
| break; |
| case iw_F2X6L10_type: |
| i = GET_IW_F2X6L10_MSB (opcode); |
| break; |
| case iw_X2L5_type: |
| i = GET_IW_X2L5_IMM5 (opcode); |
| break; |
| default: |
| bad_opcode (op); |
| } |
| (*info->fprintf_func) (info->stream, "%ld", i); |
| break; |
| |
| case 'k': |
| /* Second 5-bit unsigned immediate field. */ |
| switch (op->format) |
| { |
| case iw_F2X6L10_type: |
| i = GET_IW_F2X6L10_LSB (opcode); |
| break; |
| default: |
| bad_opcode (op); |
| } |
| (*info->fprintf_func) (info->stream, "%ld", i); |
| break; |
| |
| case 'l': |
| /* 8-bit unsigned immediate. */ |
| switch (op->format) |
| { |
| case iw_custom_type: |
| i = GET_IW_CUSTOM_N (opcode); |
| break; |
| case iw_F3X8_type: |
| i = GET_IW_F3X8_N (opcode); |
| break; |
| default: |
| bad_opcode (op); |
| } |
| (*info->fprintf_func) (info->stream, "%lu", i); |
| break; |
| |
| case 'm': |
| /* 26-bit unsigned immediate. */ |
| switch (op->format) |
| { |
| case iw_j_type: |
| i = GET_IW_J_IMM26 (opcode); |
| break; |
| case iw_L26_type: |
| i = GET_IW_L26_IMM26 (opcode); |
| break; |
| default: |
| bad_opcode (op); |
| } |
| /* This translates to an address because it's only used in call |
| instructions. */ |
| address = (address & 0xf0000000) | (i << 2); |
| (*info->print_address_func) (address, info); |
| break; |
| |
| case 'e': |
| /* Encoded enumeration for addi.n/subi.n. */ |
| switch (op->format) |
| { |
| case iw_T2X1I3_type: |
| i = nios2_r2_asi_n_mappings[GET_IW_T2X1I3_IMM3 (opcode)]; |
| break; |
| default: |
| bad_opcode (op); |
| } |
| (*info->fprintf_func) (info->stream, "%lu", i); |
| break; |
| |
| case 'f': |
| /* Encoded enumeration for slli.n/srli.n. */ |
| switch (op->format) |
| { |
| case iw_T2X1L3_type: |
| i = nios2_r2_shi_n_mappings[GET_IW_T2X1I3_IMM3 (opcode)]; |
| break; |
| default: |
| bad_opcode (op); |
| } |
| (*info->fprintf_func) (info->stream, "%lu", i); |
| break; |
| |
| case 'g': |
| /* Encoded enumeration for andi.n. */ |
| switch (op->format) |
| { |
| case iw_T2I4_type: |
| i = nios2_r2_andi_n_mappings[GET_IW_T2I4_IMM4 (opcode)]; |
| break; |
| default: |
| bad_opcode (op); |
| } |
| (*info->fprintf_func) (info->stream, "%lu", i); |
| break; |
| |
| case 'h': |
| /* Encoded enumeration for movi.n. */ |
| switch (op->format) |
| { |
| case iw_T1I7_type: |
| i = GET_IW_T1I7_IMM7 (opcode); |
| if (i == 125) |
| i = 0xff; |
| else if (i == 126) |
| i = -2; |
| else if (i == 127) |
| i = -1; |
| break; |
| default: |
| bad_opcode (op); |
| } |
| (*info->fprintf_func) (info->stream, "%ld", i); |
| break; |
| |
| case 'R': |
| { |
| unsigned long reglist = 0; |
| int dir = 1; |
| int k, t; |
| |
| switch (op->format) |
| { |
| case iw_F1X4L17_type: |
| /* Encoding for ldwm/stwm. */ |
| i = GET_IW_F1X4L17_REGMASK (opcode); |
| if (GET_IW_F1X4L17_RS (opcode)) |
| { |
| reglist = ((i << 14) & 0x00ffc000); |
| if (i & (1 << 10)) |
| reglist |= (1 << 28); |
| if (i & (1 << 11)) |
| reglist |= (1 << 31); |
| } |
| else |
| reglist = i << 2; |
| dir = GET_IW_F1X4L17_REGMASK (opcode) ? 1 : -1; |
| break; |
| |
| case iw_L5I4X1_type: |
| /* Encoding for push.n/pop.n. */ |
| reglist |= (1 << 31); |
| if (GET_IW_L5I4X1_FP (opcode)) |
| reglist |= (1 << 28); |
| if (GET_IW_L5I4X1_CS (opcode)) |
| { |
| int val = GET_IW_L5I4X1_REGRANGE (opcode); |
| reglist |= nios2_r2_reg_range_mappings[val]; |
| } |
| dir = (op->match == MATCH_R2_POP_N ? 1 : -1); |
| break; |
| |
| default: |
| bad_opcode (op); |
| } |
| |
| t = 0; |
| (*info->fprintf_func) (info->stream, "{"); |
| for (k = (dir == 1 ? 0 : 31); |
| (dir == 1 && k < 32) || (dir == -1 && k >= 0); |
| k += dir) |
| if (reglist & (1 << k)) |
| { |
| if (t) |
| (*info->fprintf_func) (info->stream, ","); |
| else |
| t++; |
| (*info->fprintf_func) (info->stream, "%s", nios2_regs[k].name); |
| } |
| (*info->fprintf_func) (info->stream, "}"); |
| break; |
| } |
| |
| case 'B': |
| /* Base register and options for ldwm/stwm. */ |
| switch (op->format) |
| { |
| case iw_F1X4L17_type: |
| if (GET_IW_F1X4L17_ID (opcode) == 0) |
| (*info->fprintf_func) (info->stream, "--"); |
| |
| i = GET_IW_F1X4I12_A (opcode); |
| (*info->fprintf_func) (info->stream, "(%s)", |
| nios2_builtin_regs[i].name); |
| |
| if (GET_IW_F1X4L17_ID (opcode)) |
| (*info->fprintf_func) (info->stream, "++"); |
| if (GET_IW_F1X4L17_WB (opcode)) |
| (*info->fprintf_func) (info->stream, ",writeback"); |
| if (GET_IW_F1X4L17_PC (opcode)) |
| (*info->fprintf_func) (info->stream, ",ret"); |
| break; |
| default: |
| bad_opcode (op); |
| } |
| break; |
| |
| default: |
| (*info->fprintf_func) (info->stream, "unknown"); |
| break; |
| } |
| return 0; |
| } |
| |
| /* nios2_disassemble does all the work of disassembling a Nios II |
| instruction opcode. */ |
| static int |
| nios2_disassemble (bfd_vma address, unsigned long opcode, |
| disassemble_info *info) |
| { |
| const struct nios2_opcode *op; |
| |
| info->bytes_per_line = INSNLEN; |
| info->bytes_per_chunk = INSNLEN; |
| info->display_endian = info->endian; |
| info->insn_info_valid = 1; |
| info->branch_delay_insns = 0; |
| info->data_size = 0; |
| info->insn_type = dis_nonbranch; |
| info->target = 0; |
| info->target2 = 0; |
| |
| /* Find the major opcode and use this to disassemble |
| the instruction and its arguments. */ |
| op = nios2_find_opcode_hash (opcode, info->mach); |
| |
| if (op != NULL) |
| { |
| const char *argstr = op->args; |
| (*info->fprintf_func) (info->stream, "%s", op->name); |
| if (argstr != NULL && *argstr != '\0') |
| { |
| (*info->fprintf_func) (info->stream, "\t"); |
| while (*argstr != '\0') |
| { |
| nios2_print_insn_arg (argstr, opcode, address, info, op); |
| ++argstr; |
| } |
| } |
| /* Tell the caller how far to advance the program counter. */ |
| info->bytes_per_chunk = op->size; |
| return op->size; |
| } |
| else |
| { |
| /* Handle undefined instructions. */ |
| info->insn_type = dis_noninsn; |
| (*info->fprintf_func) (info->stream, "0x%lx", opcode); |
| return INSNLEN; |
| } |
| } |
| |
| |
| /* print_insn_nios2 is the main disassemble function for Nios II. |
| The function diassembler(abfd) (source in disassemble.c) returns a |
| pointer to this either print_insn_big_nios2 or |
| print_insn_little_nios2, which in turn call this function when the |
| bfd machine type is Nios II. print_insn_nios2 reads the |
| instruction word at the address given, and prints the disassembled |
| instruction on the stream info->stream using info->fprintf_func. */ |
| |
| static int |
| print_insn_nios2 (bfd_vma address, disassemble_info *info, |
| enum bfd_endian endianness) |
| { |
| bfd_byte buffer[INSNLEN]; |
| int status; |
| |
| status = (*info->read_memory_func) (address, buffer, INSNLEN, info); |
| if (status == 0) |
| { |
| unsigned long insn; |
| if (endianness == BFD_ENDIAN_BIG) |
| insn = (unsigned long) bfd_getb32 (buffer); |
| else |
| insn = (unsigned long) bfd_getl32 (buffer); |
| return nios2_disassemble (address, insn, info); |
| } |
| |
| /* We might have a 16-bit R2 instruction at the end of memory. Try that. */ |
| if (info->mach == bfd_mach_nios2r2) |
| { |
| status = (*info->read_memory_func) (address, buffer, 2, info); |
| if (status == 0) |
| { |
| unsigned long insn; |
| if (endianness == BFD_ENDIAN_BIG) |
| insn = (unsigned long) bfd_getb16 (buffer); |
| else |
| insn = (unsigned long) bfd_getl16 (buffer); |
| return nios2_disassemble (address, insn, info); |
| } |
| } |
| |
| /* If we got here, we couldn't read anything. */ |
| (*info->memory_error_func) (status, address, info); |
| return -1; |
| } |
| |
| /* These two functions are the main entry points, accessed from |
| disassemble.c. */ |
| int |
| print_insn_big_nios2 (bfd_vma address, disassemble_info *info) |
| { |
| return print_insn_nios2 (address, info, BFD_ENDIAN_BIG); |
| } |
| |
| int |
| print_insn_little_nios2 (bfd_vma address, disassemble_info *info) |
| { |
| return print_insn_nios2 (address, info, BFD_ENDIAN_LITTLE); |
| } |