| -*- text -*- | |
| Changes since 1.6.3: | |
| X. DejaGnu now always runs in the POSIX locale. Additionally, environment | |
| variables such as CDPATH that are widely-known and intended for user | |
| customization are unset during early initialization. | |
| Changes since 1.6.2: | |
| 1. The internal proc 'is_remote' has been renamed to 'isremote' for | |
| consistency with the other similar procs (eg, istarget). Testsuites | |
| should use this proc. The 'is_remote' proc is deprecated. | |
| 2. runtest now accepts --local_init and --global_init options to override | |
| the default of reading "site.exp". See the manual for details. | |
| 3. runtest now responds consistently to all Tcl errors and generates an | |
| UNRESOLVED result when a test script aborts. Previously, calling an | |
| undefined procedure would cause the test run to abort while other Tcl | |
| errors produced only an easily-ignored message. | |
| 4. runtest now collects Tcl errors encountered during a test run and prints | |
| the collected errors a second time at the end of the test run after the | |
| summary. Separator lines containing more than 10 hyphens are included. | |
| 5. A utility procedure relative_filename has been added. This procedure | |
| computes a relative file name to a given destination from a given base. | |
| 6. The utility procedure 'grep' now accepts a '-n' option that | |
| includes line numbers in the output, consistent with GNU grep. | |
| 7. The target_compile procedure now accepts a "linker=" option that | |
| overrides the compiler selection when producing an executable. | |
| 8. The internal default_target_compile procedure now supports compiling | |
| sources in Go (using GCC Go) and Rust. | |
| 9. The host_execute procedure no longer insists that the executable be in | |
| the current directory if the file exists under the given name. | |
| 10. The host_execute procedure now reads input to end-of-file, to ensure | |
| that the child process will be able to complete instead of being cut | |
| short by a SIGPIPE under unpredictable unfavorable timing scenarios. | |
| 11. The match patterns in the host_execute procedure have been revised to | |
| fix timing issues causing test names to be truncated. | |
| 12. The host_execute procedure is no longer sensitive to the value of the | |
| "text" global variable. | |
| 13. A new multiplex procedure "testsuite" is added for commands retrieving | |
| or providing information about the current testsuite. | |
| 14. A command "testsuite file" is added to replace the use of the "*dir" | |
| variables in test scripts. | |
| 15. A command "testsuite can call" is added to report the availability of | |
| multiplexed API calls. | |
| 16. A new multiplex procedure "testcase" is added for commands examining or | |
| manipulating the dynamic state of ongoing testing. | |
| 17. A command "testcase group" is provided for reporting test groups to the | |
| DejaGnu core. Currently, the usage of this command is validated, but | |
| it will affect at least XML output in a future release of DejaGnu. | |
| 18. A shell command "dejagnu" is added as a place to hang various | |
| auxiliary commands not directly involved with running tests. The | |
| "runtest" command will remain for that purpose for the foreseeable | |
| future. | |
| 19. The first auxiliary command is added: "report card". The "dejagnu | |
| report card" command reads DejaGnu summary files and produces a compact | |
| tabular summary across multiple tools. | |
| 20. A Tcl namespace is now used for some internal procedures and variables. | |
| The Tcl namespace ::dejagnu and all child namespaces are entirely | |
| internal and should not be mentioned in testsuite code. Its contents | |
| are subject to change without notice, even on point releases. | |
| 21. The DejaGnu testsuite no longer searches for a nearby Expect executable | |
| in the location where it would have been located in the old Cygnus tree | |
| layout. If you want to use a special Expect other than the system | |
| Expect, specify EXPECT=/name/of/expect to "runtest" or "make check". | |
| Changes since 1.6.1: | |
| 1. runtest will abort if $DEJAGNU is defined but the file is not | |
| found. | |
| Changes since 1.6: | |
| Minor bug fixes, no major changes. | |
| Changes since 1.5.3: | |
| 1. Proper support for target communication via SSH has been added. | |
| 2. A large number of very old config and baseboard files have been | |
| removed. If you need to resurrect these, you can get them from | |
| version 1.5.3. If you can show that a board is still in use, it | |
| can be put back in the distribution. | |
| 3. The --status command line option is now the default. This means | |
| that any error in the testsuite Tcl scripts will cause runtest to | |
| abort with exit status code 2. The --status option has been | |
| removed from the documentation, but will continue to be accepted | |
| for backward compatibility. | |
| 4. runtest now exits with exit code 0 if the testsuite "passed", 1 if | |
| something unexpected happened (eg, FAIL, XPASS or UNRESOLVED), and | |
| 2 if an exception is raised by the Tcl interpreter. | |
| 5. runtest now exits with the standard exit codes of programs that are | |
| terminated by the SIGINT, SIGTERM and SIGQUIT signals. | |
| 6. The user-visible utility procedures `absolute', `psource' and | |
| `slay' have been removed. If a testsuite uses any of these | |
| procedures, a copy of the procedure should be made and placed in | |
| the lib directory of the testsuite. | |
| 7. Support was added for testing the D compiler. | |
| 8. ~/.dejagnurc is now loaded last, not first. This allows the user to | |
| have the ability to override anything in their environment (even | |
| the site.exp file specified by $DEJAGNU). | |
| 9. The user-visible utility procedure `unsetenv' is deprecated and | |
| will be removed in the next release. If a testsuite uses any of | |
| these procedures, a copy of the procedure should be made and placed | |
| in the lib directory of the testsuite. | |
| Changes since 1.4.4: | |
| 1. The runtest.1 man page has been brought up to date. | |
| 2. The Docbook/SGML documentation files were removed in favour of the | |
| Docbook/XML documentation. The Texinfo source for the Info pages is | |
| now automatically generated from the Docbook source. | |
| 3. The Makefile structure has been substantially simplified. There | |
| is now a single top-level Makefile.am. The use of recursive make | |
| has been eliminated. | |
| 4. lib/mondfe.exp and lib/xsh.exp have been removed. Users requiring | |
| these communication modes can still use the DejaGnu 1.4 branch or | |
| can contact dejagnu@gnu.org to discuss reinstating these files. | |
| 5. The configure script now ensures that Expect is installed and that | |
| it is linked against Tcl 8.3 or greater. | |
| 6. The runtest program now gracefully handles the possibility of the | |
| expect binary vanishing after DejaGnu has been installed (for | |
| example, by the user altering their PATH). | |
| 7. The user-visible utility procedures `absolute', `prune', `psource' | |
| and `slay' are deprecated and will be removed in the next release. | |
| If a testsuite uses any of these procedures, a copy of the | |
| procedure should be made and placed in the lib directory of the | |
| testsuite. | |
| Changes since 1.4.2: | |
| 1. New XML output option, so test results can be loaded into a database. | |
| 2. Support for the KFAIL/KPASS (known failures). | |
| 3. New "Hello World" example. | |
| 4. New tutorial chapter. | |
| 5. Test cases build with either GCC 2.x or 3.x. | |
| 6. BlueGnu has been removed from the contrib directory. | |
| 7. The contrib/test* scipts were bitrotten and have been removed. If | |
| you still want copies of these, they can be found in the previous | |
| DejaGnu release. | |
| 8. i960glue.c has been removed. | |
| Changes since 1.4.1: | |
| 1. Various patches for bugs reported from net users. | |
| 2. Test case builds with either libstdc++-v3 (as used by GCC 3.0.x) or | |
| the older v2 (as used by GCC 2.95.x). | |
| Changes since 1.4.0: | |
| 1. There is new support for a simple unit testing API, that is also | |
| useful for embedded testing. | |
| Changes since 1.3: | |
| 1. DejaGnu is now back under active maintainance. The initial work has | |
| been rewriting the manual to bring it up to date, and switching to | |
| SGML. | |
| 2. NT support has also been added. | |
| 3. DejaGnu now uses Automake. | |
| Changes since 1.1.1: | |
| 1. Works with (included in release) Tcl 7.3 and Expect 5.6. | |
| 2. Much better error trapping and handling, including the execution of | |
| sub scripts. | |
| 3. Re-worked configuration subsystem. | |
| 4. Default handling for testing unknown targets. | |
| 5. New testsuite for expect and runtest. | |
| 6. More debugging procedures. | |
| Changes since 1.0: | |
| 1. DejaGnu now conforms to POSIX 1003.3, a standard for testing frameworks. | |
| 2. A Tcl debugger written by Don Libes has been added. | |
| 3. Lots of bug fixes. | |
| Changes since 0.9: | |
| 1. DejaGnu now installs itself like other utilities. | |
| 2. 700 G++ tests are included. | |
| 3. The bugs in the GCC tests have been fixed. | |
| 4. Testsuites are released separately. | |
| 5. Testsuite sources now reside with the within each tool's source tree. |