libphobos/libdruntime/core/sync/rwmutex.d

/**
 * The read/write mutex module provides a primitive for maintaining shared read
 * access and mutually exclusive write access.
 *
 * Copyright: Copyright Sean Kelly 2005 - 2009.
 * License:   $(LINK2 http://www.boost.org/LICENSE_1_0.txt, Boost License 1.0)
 * Authors:   Sean Kelly
 * Source:    $(DRUNTIMESRC core/sync/_rwmutex.d)
 */

/*          Copyright Sean Kelly 2005 - 2009.
 * Distributed under the Boost Software License, Version 1.0.
 *    (See accompanying file LICENSE or copy at
 *          http://www.boost.org/LICENSE_1_0.txt)
 */
module core.sync.rwmutex;


public import core.sync.exception;
private import core.sync.condition;
private import core.sync.mutex;
private import core.memory;

version (Posix)
{
    private import core.sys.posix.pthread;
}


////////////////////////////////////////////////////////////////////////////////
// ReadWriteMutex
//
// Reader reader();
// Writer writer();
////////////////////////////////////////////////////////////////////////////////


/**
 * This class represents a mutex that allows any number of readers to enter,
 * but when a writer enters, all other readers and writers are blocked.
 *
 * Please note that this mutex is not recursive and is intended to guard access
 * to data only.  Also, no deadlock checking is in place because doing so would
 * require dynamic memory allocation, which would reduce performance by an
 * unacceptable amount.  As a result, any attempt to recursively acquire this
 * mutex may well deadlock the caller, particularly if a write lock is acquired
 * while holding a read lock, or vice-versa.  In practice, this should not be
 * an issue however, because it is uncommon to call deeply into unknown code
 * while holding a lock that simply protects data.
 */
class ReadWriteMutex
{
    /**
     * Defines the policy used by this mutex.  Currently, two policies are
     * defined.
     *
     * The first will queue writers until no readers hold the mutex, then
     * pass the writers through one at a time.  If a reader acquires the mutex
     * while there are still writers queued, the reader will take precedence.
     *
     * The second will queue readers if there are any writers queued.  Writers
     * are passed through one at a time, and once there are no writers present,
     * all queued readers will be alerted.
     *
     * Future policies may offer a more even balance between reader and writer
     * precedence.
     */
    enum Policy
    {
        PREFER_READERS, /// Readers get preference.  This may starve writers.
        PREFER_WRITERS  /// Writers get preference.  This may starve readers.
    }


    ////////////////////////////////////////////////////////////////////////////
    // Initialization
    ////////////////////////////////////////////////////////////////////////////


    /**
     * Initializes a read/write mutex object with the supplied policy.
     *
     * Params:
     *  policy = The policy to use.
     *
     * Throws:
     *  SyncError on error.
     */
    this( Policy policy = Policy.PREFER_WRITERS )
    {
        m_commonMutex = new Mutex;
        if ( !m_commonMutex )
            throw new SyncError( "Unable to initialize mutex" );

        m_readerQueue = new Condition( m_commonMutex );
        if ( !m_readerQueue )
            throw new SyncError( "Unable to initialize mutex" );

        m_writerQueue = new Condition( m_commonMutex );
        if ( !m_writerQueue )
            throw new SyncError( "Unable to initialize mutex" );

        m_policy = policy;
        m_reader = new Reader;
        m_writer = new Writer;
    }

    ////////////////////////////////////////////////////////////////////////////
    // General Properties
    ////////////////////////////////////////////////////////////////////////////


    /**
     * Gets the policy used by this mutex.
     *
     * Returns:
     *  The policy used by this mutex.
     */
    @property Policy policy()
    {
        return m_policy;
    }


    ////////////////////////////////////////////////////////////////////////////
    // Reader/Writer Handles
    ////////////////////////////////////////////////////////////////////////////


    /**
     * Gets an object representing the reader lock for the associated mutex.
     *
     * Returns:
     *  A reader sub-mutex.
     */
    @property Reader reader()
    {
        return m_reader;
    }


    /**
     * Gets an object representing the writer lock for the associated mutex.
     *
     * Returns:
     *  A writer sub-mutex.
     */
    @property Writer writer()
    {
        return m_writer;
    }


    ////////////////////////////////////////////////////////////////////////////
    // Reader
    ////////////////////////////////////////////////////////////////////////////


    /**
     * This class can be considered a mutex in its own right, and is used to
     * negotiate a read lock for the enclosing mutex.
     */
    class Reader :
        Object.Monitor
    {
        /**
         * Initializes a read/write mutex reader proxy object.
         */
        this()
        {
            m_proxy.link = this;
            this.__monitor = &m_proxy;
        }


        /**
         * Acquires a read lock on the enclosing mutex.
         */
        @trusted void lock()
        {
            synchronized( m_commonMutex )
            {
                ++m_numQueuedReaders;
                scope(exit) --m_numQueuedReaders;

                while ( shouldQueueReader )
                    m_readerQueue.wait();
                ++m_numActiveReaders;
            }
        }


        /**
         * Releases a read lock on the enclosing mutex.
         */
        @trusted void unlock()
        {
            synchronized( m_commonMutex )
            {
                if ( --m_numActiveReaders < 1 )
                {
                    if ( m_numQueuedWriters > 0 )
                        m_writerQueue.notify();
                }
            }
        }


        /**
         * Attempts to acquire a read lock on the enclosing mutex.  If one can
         * be obtained without blocking, the lock is acquired and true is
         * returned.  If not, the lock is not acquired and false is returned.
         *
         * Returns:
         *  true if the lock was acquired and false if not.
         */
        bool tryLock()
        {
            synchronized( m_commonMutex )
            {
                if ( shouldQueueReader )
                    return false;
                ++m_numActiveReaders;
                return true;
            }
        }


    private:
        @property bool shouldQueueReader()
        {
            if ( m_numActiveWriters > 0 )
                return true;

            switch ( m_policy )
            {
            case Policy.PREFER_WRITERS:
                 return m_numQueuedWriters > 0;

            case Policy.PREFER_READERS:
            default:
                 break;
            }

        return false;
        }

        struct MonitorProxy
        {
            Object.Monitor link;
        }

        MonitorProxy    m_proxy;
    }


    ////////////////////////////////////////////////////////////////////////////
    // Writer
    ////////////////////////////////////////////////////////////////////////////


    /**
     * This class can be considered a mutex in its own right, and is used to
     * negotiate a write lock for the enclosing mutex.
     */
    class Writer :
        Object.Monitor
    {
        /**
         * Initializes a read/write mutex writer proxy object.
         */
        this()
        {
            m_proxy.link = this;
            this.__monitor = &m_proxy;
        }


        /**
         * Acquires a write lock on the enclosing mutex.
         */
        @trusted void lock()
        {
            synchronized( m_commonMutex )
            {
                ++m_numQueuedWriters;
                scope(exit) --m_numQueuedWriters;

                while ( shouldQueueWriter )
                    m_writerQueue.wait();
                ++m_numActiveWriters;
            }
        }


        /**
         * Releases a write lock on the enclosing mutex.
         */
        @trusted void unlock()
        {
            synchronized( m_commonMutex )
            {
                if ( --m_numActiveWriters < 1 )
                {
                    switch ( m_policy )
                    {
                    default:
                    case Policy.PREFER_READERS:
                        if ( m_numQueuedReaders > 0 )
                            m_readerQueue.notifyAll();
                        else if ( m_numQueuedWriters > 0 )
                            m_writerQueue.notify();
                        break;
                    case Policy.PREFER_WRITERS:
                        if ( m_numQueuedWriters > 0 )
                            m_writerQueue.notify();
                        else if ( m_numQueuedReaders > 0 )
                            m_readerQueue.notifyAll();
                    }
                }
            }
        }


        /**
         * Attempts to acquire a write lock on the enclosing mutex.  If one can
         * be obtained without blocking, the lock is acquired and true is
         * returned.  If not, the lock is not acquired and false is returned.
         *
         * Returns:
         *  true if the lock was acquired and false if not.
         */
        bool tryLock()
        {
            synchronized( m_commonMutex )
            {
                if ( shouldQueueWriter )
                    return false;
                ++m_numActiveWriters;
                return true;
            }
        }


    private:
        @property bool shouldQueueWriter()
        {
            if ( m_numActiveWriters > 0 ||
                m_numActiveReaders > 0 )
                return true;
            switch ( m_policy )
            {
            case Policy.PREFER_READERS:
                return m_numQueuedReaders > 0;

            case Policy.PREFER_WRITERS:
            default:
                 break;
            }

        return false;
        }

        struct MonitorProxy
        {
            Object.Monitor link;
        }

        MonitorProxy    m_proxy;
    }


private:
    Policy      m_policy;
    Reader      m_reader;
    Writer      m_writer;

    Mutex       m_commonMutex;
    Condition   m_readerQueue;
    Condition   m_writerQueue;

    int         m_numQueuedReaders;
    int         m_numActiveReaders;
    int         m_numQueuedWriters;
    int         m_numActiveWriters;
}


////////////////////////////////////////////////////////////////////////////////
// Unit Tests
////////////////////////////////////////////////////////////////////////////////


unittest
{
    import core.atomic, core.thread, core.sync.semaphore;

    static void runTest(ReadWriteMutex.Policy policy)
    {
        scope mutex = new ReadWriteMutex(policy);
        scope rdSemA = new Semaphore, rdSemB = new Semaphore,
              wrSemA = new Semaphore, wrSemB = new Semaphore;
        shared size_t numReaders, numWriters;

        void readerFn()
        {
            synchronized (mutex.reader)
            {
                atomicOp!"+="(numReaders, 1);
                rdSemA.notify();
                rdSemB.wait();
                atomicOp!"-="(numReaders, 1);
            }
        }

        void writerFn()
        {
            synchronized (mutex.writer)
            {
                atomicOp!"+="(numWriters, 1);
                wrSemA.notify();
                wrSemB.wait();
                atomicOp!"-="(numWriters, 1);
            }
        }

        void waitQueued(size_t queuedReaders, size_t queuedWriters)
        {
            for (;;)
            {
                synchronized (mutex.m_commonMutex)
                {
                    if (mutex.m_numQueuedReaders == queuedReaders &&
                        mutex.m_numQueuedWriters == queuedWriters)
                        break;
                }
                Thread.yield();
            }
        }

        scope group = new ThreadGroup;

        // 2 simultaneous readers
        group.create(&readerFn); group.create(&readerFn);
        rdSemA.wait(); rdSemA.wait();
        assert(numReaders == 2);
        rdSemB.notify(); rdSemB.notify();
        group.joinAll();
        assert(numReaders == 0);
        foreach (t; group) group.remove(t);

        // 1 writer at a time
        group.create(&writerFn); group.create(&writerFn);
        wrSemA.wait();
        assert(!wrSemA.tryWait());
        assert(numWriters == 1);
        wrSemB.notify();
        wrSemA.wait();
        assert(numWriters == 1);
        wrSemB.notify();
        group.joinAll();
        assert(numWriters == 0);
        foreach (t; group) group.remove(t);

        // reader and writer are mutually exclusive
        group.create(&readerFn);
        rdSemA.wait();
        group.create(&writerFn);
        waitQueued(0, 1);
        assert(!wrSemA.tryWait());
        assert(numReaders == 1 && numWriters == 0);
        rdSemB.notify();
        wrSemA.wait();
        assert(numReaders == 0 && numWriters == 1);
        wrSemB.notify();
        group.joinAll();
        assert(numReaders == 0 && numWriters == 0);
        foreach (t; group) group.remove(t);

        // writer and reader are mutually exclusive
        group.create(&writerFn);
        wrSemA.wait();
        group.create(&readerFn);
        waitQueued(1, 0);
        assert(!rdSemA.tryWait());
        assert(numReaders == 0 && numWriters == 1);
        wrSemB.notify();
        rdSemA.wait();
        assert(numReaders == 1 && numWriters == 0);
        rdSemB.notify();
        group.joinAll();
        assert(numReaders == 0 && numWriters == 0);
        foreach (t; group) group.remove(t);

        // policy determines whether queued reader or writers progress first
        group.create(&writerFn);
        wrSemA.wait();
        group.create(&readerFn);
        group.create(&writerFn);
        waitQueued(1, 1);
        assert(numReaders == 0 && numWriters == 1);
        wrSemB.notify();

        if (policy == ReadWriteMutex.Policy.PREFER_READERS)
        {
            rdSemA.wait();
            assert(numReaders == 1 && numWriters == 0);
            rdSemB.notify();
            wrSemA.wait();
            assert(numReaders == 0 && numWriters == 1);
            wrSemB.notify();
        }
        else if (policy == ReadWriteMutex.Policy.PREFER_WRITERS)
        {
            wrSemA.wait();
            assert(numReaders == 0 && numWriters == 1);
            wrSemB.notify();
            rdSemA.wait();
            assert(numReaders == 1 && numWriters == 0);
            rdSemB.notify();
        }
        group.joinAll();
        assert(numReaders == 0 && numWriters == 0);
        foreach (t; group) group.remove(t);
    }
    runTest(ReadWriteMutex.Policy.PREFER_READERS);
    runTest(ReadWriteMutex.Policy.PREFER_WRITERS);
}