| Wed Aug 20 10:51:02 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * Makefile.am ($(srcdir)/ltconfig): Use lineno. | |
| * configure.in: Add AM_PROG_AWK for lineno. | |
| * lineno: New program to automatically put line numbers in | |
| ltconfig. | |
| * libtool.m4, ltconfig.in (AM_PROG_LD): Yet Another Rewrite, which | |
| incorporates the results of `gcc -print-program-name=ld'. | |
| Suggested by Alexandre Oliva. | |
| Thu Aug 14 09:30:47 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in: Accept `--quiet' and `--silent' flags to turn off | |
| command echoing. From Juergen A. Erhard. | |
| (compile): Recognize the Objective C `.m' extension. From Juergen | |
| A. Erhard. | |
| (compile): Suppress error output from the second compilation (if | |
| any) so that we don't get those frustrating duplicate error | |
| messages. | |
| Tue Aug 12 09:36:59 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: Added messages to config.log to describe what sort | |
| of test we are running. | |
| (pic_flag): Added a sanity check for pic_flag. This should fix | |
| bugs reported using the cc bundled with HP-UX 10. Suggested by | |
| Bruno Haible and Akim Demaille. | |
| Fri Aug 1 10:06:55 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (link): Add -dlopen and -dlpreopen support for | |
| libtool objects. This means that dlopened modules no longer need | |
| to be shared libraries. | |
| * ltconfig.in (pic_flag): GCC on Irix 6 always builds PIC. | |
| Reported by Ian Lance Taylor. | |
| * libtool.m4 (LD): Always add `-n32' to the linker if we are using | |
| GCC on Irix 6. Reported by Ian Lance Taylor. | |
| Wed Jul 30 13:11:09 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * libtool.m4 (AM_PROG_LIBTOOL): Explicitly check enable_shared and | |
| enable_static rather than just enableval. This allows | |
| configure.in scripts to set their own defaults. Suggested by | |
| Tommy Reilly. | |
| Tue Jul 29 11:52:10 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in: Add NLS environment variable handling copied from | |
| ltconfig.in. Reported by Akim Demaille. | |
| (link): If allow_undefined_flag is not supported, then turn on old | |
| libraries. Reported by Akim Demaille. | |
| * demo/dlmain.c (main): Use dld_preloaded_symbol_count to display | |
| a message about the sortedness of the symbol table. | |
| * ltconfig.in (nlist): Use an nlist convenience variable, so that | |
| code can be shared directly with ltmain.sh.in. | |
| * ltconfig.in, ltmain.sh.in (dld_preloaded_symbol_count): Count up | |
| the number of symbols in the dld_preloaded_symbols. Set to `-1' | |
| if the list wasn't both sorted and counted. This allows | |
| applications to do a quick binary search, if they are so inclined. | |
| Fri Jul 25 10:13:49 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (link): Remove code for `-version-file', since it | |
| has been long-deprecated. | |
| Disable static linking if hardcode_direct is unsupported and there | |
| is no working link_static_flag. This provides correct behaviour | |
| for all cases on AIX 3, regardless of whether collect2 is broken | |
| or not. Reported by Mark Kettenis. | |
| * ltconfig.in: Fix typo in test polarity. From Mark Kettenis. | |
| Thu Jul 24 10:42:30 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in (hardcode_direct): Set to `unsupported' if aix3 uses | |
| a broken collect2. Adapted out of test results from Mark | |
| Kettenis. | |
| (link_static_flag): Make sure the link_static_flag actually works | |
| with a trivial binary. | |
| * ltmain.sh.in, ltconfig.in (export_dynamic_flag_spec): Renamed | |
| from export_dynamic_flag because we eval it in ltmain.sh. | |
| * ltmain.sh.in (link_static): Don't eval link_static_flag. | |
| * demo/dlmain.c (main): Change function prototype to be KNR | |
| compatible. From Kaveh R. Ghazi. | |
| * ltmain.sh.in (link): Use no_builtin_flag. This works around | |
| conflicting definitions of builtin functions with at least GCC. | |
| Reported by Kazuhiro Sasayama. | |
| * ltconfig.in (no_builtin_flag): New flag to turn off builtin | |
| functions when compiling an object file. | |
| (pipe_works): Use it. | |
| Wed Jul 23 08:18:19 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in (pic_flag): According to the libg++ 2.7.2 configure | |
| script, DEC alpha CPUs are PIC-only, as well. Reported by Kevin | |
| Jacobs. | |
| Mon Jul 21 09:46:02 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in, ltmain.sh.in: Replace all occurances of "sed 'X; | |
| Y'" with "sed -e 'X' -e 'Y'". | |
| * ltmain.sh.in (link): Finish full integration for `-dlopen' and | |
| `-dlpreopen'. | |
| Fix two silly typos where I used a compile_command in place of a | |
| finalize_command, and vice versa. | |
| Change the wrapper script to check a hardcoded path only if the | |
| argv[0] method fails. This is a compromise for the previous two | |
| patches, and should solve the majority of problems with wrapper | |
| scripts. From Kenneth Albanowski. | |
| (link): Change a reference to hardcode_libdir_colon_separated to | |
| use the new hardcode_libdir_separator variable. | |
| * demo/Makefile.am (helldl_LDFLAGS): Add `-export-dynamic' and | |
| `-dlpreopen' for building helldl. | |
| * demo/dlmain.c (main): Succeed, even if none of the libhello | |
| symbols have been preloaded. | |
| Sun Jul 20 10:17:04 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in (global_symbol_pipe): Add `U' to the accepted global | |
| symbol types. This means that we will get duplicate symbols, but | |
| we'll also be sure to get all global symbols used by the program. | |
| * ltconfig.in (pipe_works), ltmain.sh.in (link): Sort and make | |
| symbol output unique. | |
| Sat Jul 19 21:54:33 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in (pipe_works): Check to make sure our guessed | |
| global_symbol_pipe actually works. | |
| * ltmain.sh.in (link): Revert change from Kenneth Albanowski. The | |
| wrapper scripts are more reliable when they just use the argv[0] | |
| value. Generally, when the argv[0] method doesn't work, the user | |
| is trying to do something weird with an uninstalled binary, and | |
| should try a different approach. | |
| * ltconfig.in, ltmain.sh.in (CC): Always use `$CC' instead of | |
| `$cc'. This fixes a FreeBSD bug. Reported by Chuck Robey, and | |
| others. | |
| Mon Jul 14 22:26:15 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (link): In wrapper scripts, hardcode the current | |
| directory to prevent phony argv[0] values from screwing up our | |
| program. From Kenneth Albanowski. | |
| Sun Jul 13 19:14:32 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * Makefile.am (demo_distfiles): Add demo/dlmain.c to the | |
| distribution. | |
| Sat Jul 12 10:07:28 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * demo/Makefile.am: Add helldl, made from dlmain.c, to demostrate | |
| `-dlopen' usage. | |
| * demo/dlmain.c: New file to demonstrate preloaded modules. | |
| * ltmain.sh.in (link): Add `-dlopen' flag to preload dynamic | |
| modules, even on static platforms. Use `$NM' and | |
| `$global_symbol_cmd' to extract symbols from required files. | |
| (dlname): Delete dlname mode entirely. It is rendered obsolete | |
| because the `.la' file format is now a public interface. | |
| * ltconfig.in (NM): New variable for BSD-compatible nm program. | |
| (global_symbol_cmd): Pipeline to extract global symbols from the | |
| nm output. | |
| * ltmain.sh.in: The .la file header should depend on `ltmain.sh', | |
| not `$PROGRAM'. | |
| (link): Make sure $export_dynamic_flag is eval'ed before it is | |
| used. | |
| Fri Jul 11 19:33:02 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * libtool.spec: New Red Hat Package Manager specification file in | |
| order to help people prepare distributions of libtool for Linux. | |
| * ltmain.sh.in: Eliminate two accidental uses of the NONE magic | |
| value. These were breaking libtool's behaviour when no mode is | |
| specified. | |
| Tue Jul 8 11:01:27 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * Release 1.0. | |
| * ltconfig.in: On SunOS, append /usr/etc to the PATH before | |
| running ldconfig; on *BSD, append /sbin. This was done in line | |
| with the Linux change suggested by Kenneth Albanowski. | |
| * demo/Makefile.am (hardcode_tests): Aesthetic change to | |
| alphabetize order of compiling the hardcode tests. | |
| * Makefile.am (EXTRA_DIST): Delete README-automake. | |
| * README-automake: Remove from distribution. | |
| Wed Jul 2 19:13:00 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (link): In the executable wrapper, strip trailing | |
| colons from the shlibpath_var because some ld.so's, notably | |
| OpenBSD 2.0's (!), don't parse colon-terminated values correctly. | |
| From Tim Pierce. | |
| Tue Jul 1 13:03:49 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in, ltconfig.in: Eliminate uses of the NONE magic | |
| variable value. Use an empty variable instead. | |
| * ltconfig.in (with_gcc, with_gnu_ld): Do the tests for the C | |
| compiler and linker if the variables are unset, or if they are not | |
| GNU C and ld. | |
| (RANLIB): Eliminate redundant `if' statement. | |
| * configure.in: Use AM_PROG_LD. | |
| * libtool.m4 (AM_PROG_LD_GNU): New macro to determine if LD is GNU | |
| ld. | |
| (AM_PROG_LD): Rename AM_PATH_PROG_LD to AM_PROG_LD. Parameterize | |
| so that the user can specify `--with-gnu-ld' or `--without-gnu-ld' | |
| to indicate his preference. | |
| (AM_PROG_LIBTOOL): Use it. | |
| Mon Jun 30 22:32:05 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: Append /sbin to the path before running ldconfig on | |
| Linux. This helps superusers who haven't set their PATH | |
| correctly. Suggested by Kenneth Albanowski. | |
| Sun Jun 29 19:51:50 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in: Change all the `eval "$run ..."' sequences to | |
| `$run "eval ..."'. | |
| Change all `$ln_s ...' sequences to use `(cd /dir && $LN_S ...)'. | |
| This is the sequence recommended by the Autoconf manual, and | |
| should avoid any problems on older machines. Eliminate all uses | |
| of `cp -p'. Reported by Akim Demaille. | |
| (install): Use `test $# -gt 0' instead of `test -n "$1"'. | |
| * ltconfig.in (LN_S): Add test to see if `ln -s' works. | |
| * libtool.m4: Increment serial number, and require AC_PROG_LN_S. | |
| Thu Jun 26 17:55:26 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (link): Add missing `test' statement. Reported by | |
| Akim Demaille. | |
| Tue Jun 24 14:58:41 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * libtool.m4 (LD): Consistently use ac_cv_path_ld instead of | |
| am_cv_path_ld. From Tim Pierce. | |
| Fri Jun 20 08:21:34 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in: Redo two robustness fixes. Alexandre had the | |
| correct approach, but I botched them. | |
| * ltconfig.in (dynamic_linker): Disable shared libraries on | |
| MkLinux unless GNU libc is in use. Reported by Akim Demaille. | |
| Thu Jun 19 14:24:06 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (install): Add a missing `test' command. Reported | |
| by Joel Weber. | |
| Miscellaneous fixes to improve robustness. From Alexandre Oliva. | |
| Sat Jun 14 21:01:03 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (link): Create invalid libtool objects when partial | |
| linking if we don't have PIC. From Jeff Dairiki. | |
| (install): Fix bug if libtool object is installed to a file name | |
| without directory components. From Jeff Dairiki. | |
| Fri Jun 13 14:18:23 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * Makefile.am (demo/configure): Fix up rules to run autoconf. | |
| (aclocal.m4): Now we depend on our own libtool.m4. | |
| * configure.in (AM_PATH_PROG_LD): Use it. | |
| * libtool.m4 (AM_PATH_PROG_LD): New macro to find the linker used | |
| by the C compiler. | |
| (AM_PROG_LIBTOOL): Use it. | |
| * ltmain.sh.in (install, uninstall): Support installing and | |
| uninstalling `.lo' files. From Jeff Dairiki. | |
| Wed Jun 11 11:04:59 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * Makefile.am (ltconfig, ltmain.sh): Only move if $(srcdir) is not | |
| the current directory. Don't regenerate every time the package is | |
| reconfigured. Reported by Tom Tromey. | |
| (MAINTAINERCLEANFILES): Added ltconfig, ltmain.sh, so that | |
| $(srcdir) is not messed with during a regular clean. | |
| Tue Jun 10 12:26:00 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * Makefile.am (ltconfig, ltmain.sh): Be sure to move these files | |
| into $(srcdir) once they are created. | |
| * ltmain.sh.in (link): Disable building static libraries. | |
| People should use their favourite AR and RANLIB commands. | |
| Disable building old-style objects if `--disable-static' is | |
| given. Suggested by Tom Lees and Stephen Kulow. | |
| Sun Jun 8 12:10:14 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in (host_cpu, host_vendor, host_os): Patch up | |
| definitions, to allow for the fact that the host_os may contain | |
| hyphens (as in linux-gnu). From Scott Goehring. | |
| * ltmain.sh.in (link): Move the `dlname' setting closer to the top | |
| of the file. Suggested by David Mosberger-Tang. | |
| Symlink the libtool archive into the `.libs' directory so that it | |
| can be found by programs that want to find a library's dlname by | |
| searching LD_LIBRARY_PATH. Reported by David Mosberger-Tang. | |
| Fri Jun 6 15:52:28 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * Tell people to report bugs to the new libtool mailing list, | |
| <bug-libtool@gnu.ai.mit.edu>. | |
| Thu Jun 5 10:40:15 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in (allow_undefined_flag): New variable that implements | |
| `-allow-undefined'. | |
| (archive_cmds): Enable C++ constructors for FreeBSD 2.2. From | |
| David Nugent. | |
| * ltmain.sh.in (link): Accept new `-allow-undefined' flag when | |
| building libtool libraries. This tells libtool to allow | |
| unresolved symbols to exist in shared libraries. Basically, this | |
| turns off shared libraries on AIX. Suggested by Ian Lance Taylor. | |
| Mon May 26 08:24:55 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * libtool.m4 (LD): On at least IRIX, many different flags need to | |
| be propagated to the linker if they are part of the compiler | |
| command line. Reported by Anthony Green. | |
| Sat May 10 12:21:58 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: Trivial port to FreeBSD 3. From David Nugent. | |
| Fri Apr 25 13:23:33 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (link): Remove all traces of `-whole-archive', | |
| `-no-whole-archive', and libtool convenience libraries. They were | |
| more trouble than they're worth. If these are ever reimplemented, | |
| they need more careful attention to make portable. | |
| * libtool.m4, ltconfig.in: Added a `--disable-static' flag to turn | |
| off static library creation. From Tom Lees (who finally convinced | |
| me that it was the Right Thing to do). | |
| Tue Apr 22 12:41:34 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (hardcode_runpath_var, runpath_var): Use them, if | |
| the linker has no -rpath flag. | |
| Quote the values we use to set runpath_var and shlibpath_var. | |
| (link): Use libobjlibs for libtool convenience libraries. | |
| * ltconfig.in (hardcode_runpath_var, runpath_var): Add new | |
| variables to describe linkers that honour `LD_RUN_PATH'. | |
| (host_cpu, host_os): Use these more specific variables, rather | |
| than the full canonical host system name. | |
| * ltmain.sh.in (dlname): Distinguish between missing | |
| `-export-dynamic' and when the library is only statically linked. | |
| Mon Apr 21 09:52:51 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: Trivial port to OpenBSD by making it an alias for | |
| NetBSD. From Tim Pierce. | |
| Wed Apr 16 19:32:05 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: Temporary measures to check for a broken collect2 | |
| program. Right now, we just see if we're using GCC on AIX 3. | |
| Sun Apr 13 19:40:58 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (mode): Use `egrep -e' when inferring the operation | |
| mode. | |
| Sat Apr 12 13:09:24 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in (linker): Some GNU ld's don't accept `--version', | |
| but do accept `-v'. From Jukka Honkela. | |
| (ld_shlibs): AIX lossage may be settling down. AIX 3.2.5 ld does | |
| *not* hardcode direct libraries, but AIX 4.1.[45] ld does. | |
| Mon Apr 7 09:39:02 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in (hardcode_action): Fix silly logic error. From | |
| Bruno Haible. | |
| Sat Apr 5 11:26:06 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (install): Relink if hardcode_action is `relink', | |
| rather than using complex conditionals based on the other | |
| hardcode variables. | |
| * ltconfig.in (hardcode_action): Set to `relink', not `immediate', | |
| if we can only hardcode existing directories. Rearrange | |
| conditionals to make the intent clearer, otherwise this can be one | |
| hellish piece of code for the already-dizzy libtool maintainer. | |
| Wed Apr 2 10:36:31 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * replfunc.m4: Delete from the distribution. Documentation now | |
| describes how to set LTALLOCA and LTLIBOBJS in your own | |
| configure.in. | |
| * ltmain.sh.in (link): Make sure a libtool library only counts as | |
| a shared library if its library_names are non-null. | |
| Use timestamps for .lo's when PIC is turned off, rather than | |
| symlinking to the real object. This helps invalid mixtures of PIC | |
| and non-PIC to fail. | |
| Tue Apr 1 10:01:20 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * Makefile.am (EXTRA_DIST): Distribute libtool.prj. | |
| * Shameless plug: Changed source code management system from CVS | |
| to PRCS. | |
| * libtool.scm: Initial Guile implementation of libtool. | |
| * ltmain.sh.in: An unexpected inconsistency in my whole approach | |
| to shared libraries has proven that libtool needs to be completely | |
| rewritten if I'm going to give full shared library support for | |
| platforms that don't use the GNU C library version 2 (which to my | |
| knowledge currently only works on GNU Hurd and Linux/GNU systems). | |
| Porting the GNU C library should not be difficult, though. | |
| Platforms that don't have the dlopen(3) family of functions will | |
| need to install GNU DLD version 4 in order to build any kind of | |
| libraries at all. Unfortunately, DLD 4 won't be released for a | |
| while, because I maintain it, and I'm too busy working on libtool. | |
| I'll keep the old ltconfig/ltmain.sh implementation around for as | |
| long as I can, and continue applying bug fixes, so that I'll have | |
| a reasonable starting point for this new libtool implementation. | |
| It looks like this implementation will be even more complex than | |
| the original (pre-0.7) libtool. Initial estimates show that it | |
| may be up to 3 times slower, and 5 times larger than libtool-0.9. | |
| I'll probably have to rewrite it in Guile to get reasonable | |
| performance, which will severely limit its portability for a | |
| while. | |
| That will also introduce a bootstrapping issue, since the next | |
| release of Guile will use libtool to build shared libraries. So, | |
| if users want to have shared Guile libraries, they will have to | |
| configure Guile with `--disable-shared', compile it, install it, | |
| then reconfigure Guile with `--enable-shared' and repeat. | |
| I was hoping to get libtool 1.0 out the door by early April, but | |
| now it looks like it will take at least another year before it'll | |
| be usable by the public at large. April fools. libtool.scm | |
| doesn't exist yet, either. | |
| * ltconfig.in (verify_host): Remove redundant `Transform *-*-linux* | |
| to *-*-linux-gnu*'. From Bruno Haible. | |
| Mon Mar 31 16:15:03 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * Makefile.am: Use the new AUTOMAKE and ACLOCAL variables. | |
| * ltmain.sh.in (link): Only fail if a convenience library doesn't | |
| exist, and the user specified -whole-archive. | |
| Fix shell quoting that was breaking @OUTPUT@ substitution. | |
| Fri Mar 28 19:09:08 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (link): Use the hardcode_libdir_separator. | |
| Convenience libraries are libtool objects if we're not building | |
| libtool libs. | |
| * ltconfig.in (hardcode_libdir_separator): Added in case the | |
| linker only honours the last of the -rpath flags (but it can | |
| contain multiple colon-separated directories), such as on OSF/1. | |
| Reported by Carl D. Roth. | |
| * ltmain.sh.in (link): Set the dlname if -export-dynamic is given. | |
| (install, uninstall): Handle the dlname file separately. | |
| * ltconfig.in (export_dynamic_flag): Added to allow programs to | |
| use reflexive dlopens. | |
| * ltmain.sh.in: Include the mode name in any help messages. | |
| (dlname): New mode to give the name to be used with dlopen(3). | |
| * ltconfig.in (AR): Allow AR to be set by the user, and export it | |
| to ltmain.sh. | |
| * ltmain.sh.in: Remove broken profiled library support. | |
| Added `-whole-archive' and `-no-whole-archive' to manipulate | |
| convenience libraries. | |
| Thu Mar 27 15:55:34 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (link): Allow the creation of static convenience | |
| libraries made of libtool objects. Suggested by David | |
| Mosberger-Tang. | |
| Tue Mar 25 08:38:23 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: On AIX, libtool also needs to look for `B' symbols | |
| in nm output. These are global variable definitions. | |
| * ltmain.sh.in: Linking with -static should link against the | |
| linklib if old_library is empty (like it is on AIX). | |
| * ltconfig.in: Change the order of OS detection, so that | |
| linux-gnu* is detected before gnu*. | |
| * Makefile.am (libtool): Use the correct CC, RANLIB, LD, when | |
| generating libtool. From Carl D. Roth. | |
| * configure.in: Find out the user-supplied CC, LD, RANLIB. From | |
| Carl D. Roth. | |
| Mon Mar 24 01:26:48 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in: Linking with -static should link against the old | |
| library, not linklib. | |
| * README-automake: Updated to point to Automake 1.1m. | |
| Sat Mar 15 14:15:43 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * demo/main.c: Use it. | |
| * demo/foo.h: Declare it. | |
| * demo/foo.c: Added definition of `nothing' so that we have an | |
| global variable definition, as well as functions. | |
| Wed Mar 12 19:00:44 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: Make sure either enable_shared or enable_static is | |
| configured. Reported by Tom Tromey. | |
| * ltmain.sh.in: Bomb out if no library types are configured. | |
| Sat Feb 22 12:47:59 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in, ltmain.sh.in (hardcode_libdir_flag_spec): Renamed | |
| from `hardcode_libdir_flag'. | |
| (library_names_spec): Renamed from `lib_names'. | |
| * ltconfig.in, ltmain.sh.in (hardcode_action): Change value from | |
| `rpath' to `immediate'. | |
| * replfunc.m4: Add AM_FUNC_ALLOCA, AM_FUNC_MEMCMP, and | |
| AM_STRUCT_ST_BLOCKS. | |
| Tue Feb 18 09:36:24 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: Transform *-*-linux* to *-*-linux-gnu* to support | |
| old-style config.guess scripts. | |
| Mon Feb 17 23:30:32 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in: Create objdir *before* linking a program into it. | |
| Wed Feb 12 01:20:45 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: Any ld --version that returns GNU is probably a GNU | |
| ld. From Marcus Daniels. | |
| * libtool.m4: Added AM_REPLACE_FUNCS. | |
| Tue Feb 11 01:28:19 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: Trivial port to *-*-osf4. From Bruno Haible. | |
| Mon Feb 10 09:54:07 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: AIX 3 and 4 ld only hardcodes LIBPATH if -L is not | |
| specified. This behaviour is the same with both xlc and gcc. | |
| Fri Feb 7 08:37:54 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * doc/platforms.texi: Yaay! We found a workaround for HP-UX | |
| /bin/sh buffer overflows. From Eric Backus. | |
| Mon Feb 3 11:15:01 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * Release 0.9. | |
| * PLATFORMS, doc/platforms.texi, Makefile.am, doc/Makefile.am: | |
| Move PLATFORMS to doc/platforms.texi. | |
| * ltmain.sh.in (link): Use hardcode_libdir_flag to get a library | |
| directory into the resulting binary. | |
| Use hardcode_action, and make many simplifying changes to have | |
| compilation and finalization be consistent with each other. | |
| * ltconfig.in: Not so amazing! It's AIX cc that hardcodes direct | |
| libraries... gcc doesn't, though. | |
| (link_rpath_flag): Change link_rpath_flag to be | |
| hardcode_libdir_flag. | |
| (hardcode_action): New variable to simplify ltmain.sh. | |
| Wed Jan 29 12:58:00 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in: Change to take advantage of linkers that don't | |
| hardcode direct libraries. | |
| * ltconfig.in: Amazing! AIX 3 linker doesn't hardcode direct | |
| libraries, which makes it less buggy than AIX 4. Reported by Mark | |
| Kettenis. | |
| * demo/configure.in: Check for the math library. | |
| * demo/foo.c (foo): Change to use the `cos' function, so that we | |
| need to link against another library. | |
| Tue Jan 28 20:32:19 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (link): Export the PATH variable in order to find | |
| the program, rather than giving a full path. This helps give the | |
| program a less confusing value for argv[0]. | |
| Sun Jan 26 15:50:07 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * Release 0.8. | |
| Fri Jan 24 23:32:03 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * Makefile.am (demo_distfiles): Add demo/acinclude.m4 to the | |
| distribution. | |
| Wed Jan 22 17:22:17 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * libtool.m4: For IRIX 6, ld needs -n32 if cc uses it. Reported | |
| by Bruno Haible. | |
| * ltconfig.in: IRIX ld does not hardcode direct libraries. | |
| Reported by Bruno Haible. | |
| Sat Jan 18 15:15:12 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in, ltmain.sh.in (hardcode_shlibpath_var): Allow new | |
| value, `unsupported', since most linkers do not allow you to use | |
| shlibpath_var for initial linking. | |
| * ltconfig.in: Lots of bug fixes from Bruno Haible. Set wl on | |
| OSF/1, fix definitions of hardcode_* variables. | |
| (archive_cmds): Fix not to use +h on HP-UX 9.x. Reported by Bruno | |
| Haible. | |
| Fri Jan 17 09:58:22 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * libtoolize.in: Handle explicit AC_CONFIG_AUX_DIR settings. | |
| Suggested by Akim Demaille. | |
| * libtool.m4: Change ltconfig line to use $CONFIG_SHELL when it is | |
| specified. Reported by Bruno Haible. | |
| Thu Jan 16 17:57:38 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * demo/Makefile.am (hc-direct): Do better searching for the proper | |
| name to do a direct link. | |
| (hc-libpath): Make allowances if shlibpath_var cannot be used | |
| to find libraries at link time, such as on AIX. | |
| * Makefile.am (demo_distfiles): Remove ansi2knr.1 and ansi2knr.c. | |
| * demo/foo.c, demo/hello.c, demo/main.c: Change ANSI prototypes to | |
| KNR form, for better portability, and less ansi2knr hair. | |
| * demo/configure.in: Remove AM_FUNC_PROTOTYPES. | |
| * demo/Makefile.am: Remove ansi2knr from the AUTOMAKE_OPTIONS. | |
| * demo/ansi2knr.1, demo/ansi2knr.c: Removed these files. | |
| * ltmain.sh.in: Use 1>&2 consistently to direct errors and | |
| warnings to stderr. | |
| (compile): Fix missing single quote. | |
| * ltconfig.in (hardcode_direct): On Solaris at least, using | |
| DIR/libNAME.so does not hardcode DIR, so introduce a new hardcode | |
| variable to reflect that. | |
| * ltmain.sh.in (link): If linking with $link_static_flag fails, | |
| then retry without it, but still use the .a versions of | |
| uninstalled libtool archives. | |
| Wed Jan 15 08:59:22 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (link): Eval $link_static_flag. Reported by Bruno | |
| Haible. | |
| * PLATFORMS: Add to distribution. Suggested by Bruno Haible. | |
| Mon Jan 13 12:59:29 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: Add support for SCO OpenServer 5.x. | |
| (can_build_shared): Initialize at the top of the file, so that | |
| shared libraries aren't built on platforms that don't support | |
| them. | |
| Sat Jan 11 13:29:08 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in, ltconfig.in, libtoolize.in, doc/libtool.texi: | |
| Update the copyright completion years. | |
| Wed Jan 8 15:01:06 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: Port to IRIX 5.3, 6.2. | |
| Mon Jan 6 08:54:00 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: HP-UX 9 support is the same as HP-UX 10, so the | |
| port is trivial. | |
| * libtoolize.in: Add --dry-run option, -n for short. | |
| Fri Jan 3 17:26:07 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (link): On at least SunOS, /bin/sh doesn't | |
| understand "export something=val". From Bruno Haible. | |
| Thu Jan 2 13:04:17 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (compile): Recognize valid source file suffixes for | |
| Fortran and C++. | |
| Tue Dec 17 23:17:17 1996 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (link): Don't allow *._o and *.l_o to be valid | |
| object type suffixes, in spite of Automake's current ansi2knr | |
| implementation. Not all compilers allow non-`.o' suffixes. | |
| Mon Dec 16 20:16:35 1996 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (link): Delete the `libtool' version type. | |
| Thu Dec 12 00:04:27 1996 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: Use the full autoconf syntax when checking for GNU | |
| C. Delete library stripping program, until we have a correct | |
| test. | |
| Wed Dec 11 11:41:33 1996 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: On AIX 3, use /usr/ucb/nm, not /ucb/nm. From | |
| ir. M.M. Kettenis. | |
| Mon Dec 9 12:06:31 1996 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| Reported by Charles Kerr: | |
| * doc/libtool.texi (Creating Object Files): Doc fix independant -> | |
| independent. | |
| * ltconfig.in (ld_shlibs): SunOS 4 doesn't support shared library | |
| dependencies. | |
| Sun Dec 8 14:39:04 1996 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * Release 0.7. | |
| * Makefile.am (EXTRA_DIST): Add README-automake to the | |
| distribution. | |
| * ltmain.sh.in (link): When linking libtool libraries, use | |
| standard objects if they are PIC. This prevents spurious warnings | |
| about invalid suffixes on AIX. | |
| * demo/Makefile.am: Rename libhell to libhello, so that we're not | |
| quite as offensive. | |
| * ltconfig.in: Remove unnecessary host validity checking. | |
| * ltmain.sh.in: Don't force people to use libNAME.la: SOMETHING.la | |
| is good enough (for consistency with *.a handling). | |
| Sat Dec 7 12:31:15 1996 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (link): Accept files ending in .a as standard | |
| object files. Reported by Ulrich Drepper. | |
| Remove support for creating profiled libraries (for now). | |
| Transform all library objects into standard objects when linking a | |
| program. | |
| * ltconfig.in (thisdir): How embarrassing! An error in the regexp | |
| for finding the directory component of the script path. | |
| Thu Dec 5 14:19:21 1996 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (compile): Support `.S' (preprocessed assembler) | |
| files. Reported by Anthony Green. | |
| * libtoolize.in: Give clearer instrutions for how to update | |
| aclocal.m4. | |
| * ltconfig.in, ltmain.sh.in (link): Add support for creating | |
| reloadable objects. | |
| Wed Dec 4 00:42:53 1996 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (install): Fix passing -n flag to `libtool | |
| --finish'. | |
| (compile): Compile `.lo' and `.o' objects at the same time so that | |
| non-PIC objects (if they are available) can be used for linking | |
| into programs and creating static archives. Suggested by Ulrich | |
| Drepper. | |
| Tue Dec 3 10:43:22 1996 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (link): Give the full path to the libtool library | |
| when sourcing it. | |
| * ltconfig.in (old_striplib): Do a configuration test to determine | |
| if old-style libraries actually can be stripped or not. | |
| Mon Dec 2 13:57:28 1996 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: Delete reference to ABOUT-LIBS. | |
| * tests: Added new subdirectory. | |
| * doc/libtool.texi: Doc fixes, and finished up the Configuring | |
| chapter. | |
| * ltmain.sh.in (link): Allow *._o and *.l_o to be valid object | |
| file suffixes, for Automake's ansi2knr implementation. | |
| New option -version-info replaces -version-file. | |
| [help]: Give a pointer to mode-specific help when appropriate. | |
| * ltconfig.in: Changed messages to correspond to AM_PROG_CC_STDC. | |
| * demo: Also test Automake's ansi2knr support. | |
| Tue Nov 19 14:09:27 1996 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: Bug fixes for AIX 4, and for static platforms. | |
| * ltmain.sh.in (install): Fix for loops over arguments. | |
| Need to quote ${IFS= } -> "${IFS= }". | |
| (link): Fix soname_spec bug. Create objdir whether or not we have | |
| shared libraries. | |
| * ltconfig.in: Check for library stripping program. | |
| Use test -f instead of test -e. | |
| Mon Nov 18 20:10:42 1996 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltconfig.in: Don't run the RANLIB test unless RANLIB wasn't | |
| set. | |
| Be verbose about the environment variables we were configured | |
| with. | |
| * ltmain.sh.in (objdir): change to .libs. | |
| Sat Nov 16 12:02:03 1996 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in (install): Just plunge ahead with the | |
| installation... don't try to enforce dependencies. | |
| Fri Nov 15 17:57:36 1996 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh.in: Fix up $libdir to be $dest in install mode. | |
| Sun Nov 10 13:08:04 1996 Gordon Matzigkeit <gord@gnu.ai.mit.edu> | |
| * ltmain.sh: Finished rewrite of compile, link, and install | |
| modes. | |
| * New ChangeLog file for libtool-0.7, since I've totally rewritten | |
| libtool. | |
| Fri Mar 15 14:21:15 1996 Gord Matzigkeit <gord@gnu.ai.mit.edu> | |
| * For historical reasons: this is when I started writing libtool. |