| # libtoolize.at -- test libtoolize operation -*- Autotest -*- | |
| # | |
| # Copyright (C) 2005, 2007, 2008 Free Software Foundation, Inc. | |
| # Written by Gary V. Vaughan, 2005 | |
| # | |
| # This file is part of GNU Libtool. | |
| # | |
| # GNU Libtool is free software; you can redistribute it and/or | |
| # modify it under the terms of the GNU General Public License as | |
| # published by the Free Software Foundation; either version 2 of | |
| # the License, or (at your option) any later version. | |
| # | |
| # GNU Libtool is distributed in the hope that it will be useful, | |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| # GNU General Public License for more details. | |
| # | |
| # You should have received a copy of the GNU General Public License | |
| # along with GNU Libtool; see the file COPYING. If not, a copy | |
| # can be downloaded from http://www.gnu.org/licenses/gpl.html, | |
| # or obtained by writing to the Free Software Foundation, Inc., | |
| # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. | |
| #### | |
| AT_BANNER([Libtoolize operation.]) | |
| # _LT_CONFIGURE_AC | |
| # ---------------- | |
| m4_define([_LT_CONFIGURE_AC], | |
| [AT_DATA([configure.ac], | |
| [[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[) | |
| AC_CONFIG_AUX_DIR([build-aux]) | |
| AC_CONFIG_MACRO_DIR([m4]) | |
| LT_INIT | |
| AC_OUTPUT | |
| ]]) | |
| ])# _LT_CONFIGURE_AC | |
| # _LT_LIBTOOLIZE_SETUP | |
| # -------------------- | |
| m4_define([_LT_LIBTOOLIZE_SETUP], | |
| [_LT_CONFIGURE_AC | |
| test -d m4 || { rm -f m4 && mkdir m4; } | |
| rm -f m4/libtool.m4 m4/ltoptions.m4 build-aux/ltmain.sh | |
| AT_DATA([Makefile.am], | |
| [[ACLOCAL_AMFLAGS = -I m4 | |
| ]]) | |
| # This file should be upgraded. | |
| AT_DATA([m4/libtool.m4], [[ | |
| # serial 25 LT_INIT | |
| ]]) | |
| # This file has a very high serial number, and should be left unchanged | |
| # until --force is passed. | |
| AT_DATA([m4/ltoptions.m4], [[ | |
| # serial 99999 ltoptions.m4 | |
| ]]) | |
| test -d build-aux || { rm -f build-aux && mkdir build-aux; } | |
| # This file has a very high serial number, and needs --force to be updated. | |
| AT_DATA([build-aux/ltmain.sh], [[ | |
| package_revision=9999.9999 | |
| ]]) | |
| # This file has a very old serial number, but should be left unchanged | |
| # unless the --install flag is invoked. | |
| AT_DATA([build-aux/config.guess], [[ | |
| timestamp='1970-01-01' | |
| ]]) | |
| ])# LT_LIBTOOLIZE_SETUP | |
| ## ------------------- ## | |
| ## Macro installation. ## | |
| ## ------------------- ## | |
| AT_SETUP([libtoolize macro installation]) | |
| _LT_CONFIGURE_AC | |
| AT_DATA(expout, | |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. | |
| libtoolize: copying file `build-aux/ltmain.sh' | |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. | |
| libtoolize: copying file `m4/libtool.m4' | |
| libtoolize: copying file `m4/ltoptions.m4' | |
| libtoolize: copying file `m4/ltsugar.m4' | |
| libtoolize: copying file `m4/ltversion.m4' | |
| libtoolize: copying file `m4/lt~obsolete.m4' | |
| libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout) | |
| AT_CLEANUP | |
| ## ------------------------- ## | |
| ## ACLOCAL_AMFLAGS mismatch. ## | |
| ## ------------------------- ## | |
| AT_SETUP([libtoolize macro directory mismatch error]) | |
| _LT_CONFIGURE_AC | |
| AT_DATA([Makefile.am], | |
| [[ACLOCAL_AMFLAGS = -I me2 | |
| ]]) | |
| AT_DATA(experr, | |
| [[libtoolize: AC_CONFIG_MACRO_DIR([m4]) conflicts with ACLOCAL_AMFLAGS=-I me2. | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 1, [ignore], experr) | |
| AT_CLEANUP | |
| ## -------------- ## | |
| ## Serial update. ## | |
| ## -------------- ## | |
| AT_SETUP([libtoolize macro serial update]) | |
| _LT_LIBTOOLIZE_SETUP | |
| ## -------------------------------------------------------------------- ## | |
| ## First we try to update with some newer files in the destination dir. ## | |
| ## -------------------------------------------------------------------- ## | |
| AT_DATA(expout, | |
| [[libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. | |
| libtoolize: copying file `m4/libtool.m4' | |
| libtoolize: copying file `m4/ltsugar.m4' | |
| libtoolize: copying file `m4/ltversion.m4' | |
| libtoolize: copying file `m4/lt~obsolete.m4' | |
| ]]) | |
| AT_DATA(experr, | |
| [[libtoolize: `build-aux/ltmain.sh' is newer: use `--force' to overwrite | |
| libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout, experr) | |
| ## ---------------------------------------------------------- ## | |
| ## Next, a second update attempt with everything now updated. ## | |
| ## ---------------------------------------------------------- ## | |
| AT_DATA(expout, [[]]) | |
| AT_DATA(experr, | |
| [[libtoolize: `build-aux/ltmain.sh' is newer: use `--force' to overwrite | |
| libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout, experr) | |
| ## ----------------------------------------------------------- ## | |
| ## Now, a forced update to downgrade files with newer serials. ## | |
| ## ----------------------------------------------------------- ## | |
| AT_DATA(expout, | |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. | |
| libtoolize: copying file `build-aux/ltmain.sh' | |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. | |
| libtoolize: copying file `m4/libtool.m4' | |
| libtoolize: copying file `m4/ltoptions.m4' | |
| libtoolize: copying file `m4/ltsugar.m4' | |
| libtoolize: copying file `m4/ltversion.m4' | |
| libtoolize: copying file `m4/lt~obsolete.m4' | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy --force], 0, expout) | |
| ## ---------------------------------------------------------------- ## | |
| ## A final update attempt with everything previously force updated. ## | |
| ## ---------------------------------------------------------------- ## | |
| AT_DATA(expout, [[]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout) | |
| AT_CLEANUP | |
| ## --------------- ## | |
| ## --install flag. ## | |
| ## --------------- ## | |
| AT_SETUP([libtoolize config files serial update]) | |
| _LT_LIBTOOLIZE_SETUP | |
| ## -------------------------------------------------------------------- ## | |
| ## First we try to update with some newer files in the destination dir. ## | |
| ## -------------------------------------------------------------------- ## | |
| AT_DATA(expout, | |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. | |
| libtoolize: copying file `build-aux/config.guess' | |
| libtoolize: copying file `build-aux/config.sub' | |
| libtoolize: copying file `build-aux/install-sh' | |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. | |
| libtoolize: copying file `m4/libtool.m4' | |
| libtoolize: copying file `m4/ltsugar.m4' | |
| libtoolize: copying file `m4/ltversion.m4' | |
| libtoolize: copying file `m4/lt~obsolete.m4' | |
| ]]) | |
| AT_DATA(experr, | |
| [[libtoolize: `build-aux/ltmain.sh' is newer: use `--force' to overwrite | |
| libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy --install], 0, expout, experr) | |
| ## ---------------------------------------------------------- ## | |
| ## Next, a second update attempt with everything now updated. ## | |
| ## ---------------------------------------------------------- ## | |
| AT_DATA(expout, [[]]) | |
| AT_DATA(experr, | |
| [[libtoolize: `build-aux/ltmain.sh' is newer: use `--force' to overwrite | |
| libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy --install], 0, expout, experr) | |
| ## ----------------------------------------------------------- ## | |
| ## Now, a forced update to downgrade files with newer serials. ## | |
| ## ----------------------------------------------------------- ## | |
| AT_DATA(expout, | |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. | |
| libtoolize: copying file `build-aux/config.guess' | |
| libtoolize: copying file `build-aux/config.sub' | |
| libtoolize: copying file `build-aux/install-sh' | |
| libtoolize: copying file `build-aux/ltmain.sh' | |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. | |
| libtoolize: copying file `m4/libtool.m4' | |
| libtoolize: copying file `m4/ltoptions.m4' | |
| libtoolize: copying file `m4/ltsugar.m4' | |
| libtoolize: copying file `m4/ltversion.m4' | |
| libtoolize: copying file `m4/lt~obsolete.m4' | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy --force --install], 0, expout) | |
| ## ---------------------------------------------------------------- ## | |
| ## A final update attempt with everything previously force updated. ## | |
| ## ---------------------------------------------------------------- ## | |
| AT_DATA(expout, [[]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy --install], 0, expout) | |
| AT_CLEANUP | |
| ## ----------------------------------------------------------------- ## | |
| ## Ensure libtoolize works when LT_CONFIG_LTDL_DIR is not specified. ## | |
| ## ----------------------------------------------------------------- ## | |
| AT_SETUP([diagnose missing LT_CONFIG_LTDL_DIR]) | |
| AT_DATA(expout, | |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. | |
| libtoolize: copying file `build-aux/config.guess' | |
| libtoolize: copying file `build-aux/config.sub' | |
| libtoolize: copying file `build-aux/install-sh' | |
| libtoolize: copying file `build-aux/ltmain.sh' | |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. | |
| libtoolize: copying file `m4/argz.m4' | |
| libtoolize: copying file `m4/libtool.m4' | |
| libtoolize: copying file `m4/ltdl.m4' | |
| libtoolize: copying file `m4/ltoptions.m4' | |
| libtoolize: copying file `m4/ltsugar.m4' | |
| libtoolize: copying file `m4/ltversion.m4' | |
| libtoolize: copying file `m4/lt~obsolete.m4' | |
| libtoolize: putting libltdl files in `ltdl'. | |
| libtoolize: copying file `ltdl/COPYING.LIB' | |
| libtoolize: copying file `ltdl/README' | |
| libtoolize: copying file `ltdl/argz_.h' | |
| libtoolize: copying file `ltdl/argz.c' | |
| libtoolize: copying file `ltdl/loaders/dld_link.c' | |
| libtoolize: copying file `ltdl/loaders/dlopen.c' | |
| libtoolize: copying file `ltdl/loaders/dyld.c' | |
| libtoolize: copying file `ltdl/loaders/load_add_on.c' | |
| libtoolize: copying file `ltdl/loaders/loadlibrary.c' | |
| libtoolize: copying file `ltdl/loaders/shl_load.c' | |
| libtoolize: copying file `ltdl/lt__dirent.c' | |
| libtoolize: copying file `ltdl/lt__strl.c' | |
| libtoolize: copying file `ltdl/libltdl/lt__alloc.h' | |
| libtoolize: copying file `ltdl/libltdl/lt__dirent.h' | |
| libtoolize: copying file `ltdl/libltdl/lt__glibc.h' | |
| libtoolize: copying file `ltdl/libltdl/lt__private.h' | |
| libtoolize: copying file `ltdl/libltdl/lt__strl.h' | |
| libtoolize: copying file `ltdl/libltdl/lt_dlloader.h' | |
| libtoolize: copying file `ltdl/libltdl/lt_error.h' | |
| libtoolize: copying file `ltdl/libltdl/lt_system.h' | |
| libtoolize: copying file `ltdl/libltdl/slist.h' | |
| libtoolize: copying file `ltdl/loaders/preopen.c' | |
| libtoolize: copying file `ltdl/lt__alloc.c' | |
| libtoolize: copying file `ltdl/lt_dlloader.c' | |
| libtoolize: copying file `ltdl/lt_error.c' | |
| libtoolize: copying file `ltdl/ltdl.c' | |
| libtoolize: copying file `ltdl/ltdl.h' | |
| libtoolize: copying file `ltdl/slist.c' | |
| libtoolize: creating file `ltdl/Makefile.inc' | |
| libtoolize: Remember to add `LT_CONFIG_LTDL_DIR([ltdl])' to `configure.ac'. | |
| libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. | |
| ]]) | |
| AT_DATA([configure.ac], | |
| [[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[) | |
| AC_CONFIG_AUX_DIR([build-aux]) | |
| AC_CONFIG_MACRO_DIR([m4]) | |
| LT_INIT | |
| LTDL_INIT([nonrecursive]) | |
| AC_OUTPUT | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy --install --ltdl=ltdl], 0, expout) | |
| AT_CLEANUP | |
| ## ---------------------------- ## | |
| ## Make sure ltdl.m4 is copied. ## | |
| ## ---------------------------- ## | |
| # _LT_AT_LTDL_SETUP | |
| # ----------------- | |
| # Macro to generate data files common to several tests. | |
| m4_pushdef([_LT_AT_LTDL_SETUP], | |
| [AT_DATA(expout, | |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `ltdl/config'. | |
| libtoolize: linking file `ltdl/config/compile' | |
| libtoolize: linking file `ltdl/config/config.guess' | |
| libtoolize: linking file `ltdl/config/config.sub' | |
| libtoolize: linking file `ltdl/config/depcomp' | |
| libtoolize: linking file `ltdl/config/install-sh' | |
| libtoolize: linking file `ltdl/config/missing' | |
| libtoolize: linking file `ltdl/config/ltmain.sh' | |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `ltdl/m4'. | |
| libtoolize: linking file `ltdl/m4/argz.m4' | |
| libtoolize: linking file `ltdl/m4/libtool.m4' | |
| libtoolize: linking file `ltdl/m4/ltdl.m4' | |
| libtoolize: linking file `ltdl/m4/ltoptions.m4' | |
| libtoolize: linking file `ltdl/m4/ltsugar.m4' | |
| libtoolize: linking file `ltdl/m4/ltversion.m4' | |
| libtoolize: linking file `ltdl/m4/lt~obsolete.m4' | |
| libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, `ltdl'. | |
| libtoolize: linking file `ltdl/COPYING.LIB' | |
| libtoolize: linking file `ltdl/README' | |
| libtoolize: linking file `ltdl/Makefile.am' | |
| libtoolize: linking file `ltdl/configure.ac' | |
| libtoolize: copying file `ltdl/aclocal.m4' | |
| libtoolize: linking file `ltdl/Makefile.in' | |
| libtoolize: linking file `ltdl/config-h.in' | |
| libtoolize: linking file `ltdl/configure' | |
| libtoolize: linking file `ltdl/argz_.h' | |
| libtoolize: linking file `ltdl/argz.c' | |
| libtoolize: linking file `ltdl/loaders/dld_link.c' | |
| libtoolize: linking file `ltdl/loaders/dlopen.c' | |
| libtoolize: linking file `ltdl/loaders/dyld.c' | |
| libtoolize: linking file `ltdl/loaders/load_add_on.c' | |
| libtoolize: linking file `ltdl/loaders/loadlibrary.c' | |
| libtoolize: linking file `ltdl/loaders/shl_load.c' | |
| libtoolize: linking file `ltdl/lt__dirent.c' | |
| libtoolize: linking file `ltdl/lt__strl.c' | |
| libtoolize: linking file `ltdl/libltdl/lt__alloc.h' | |
| libtoolize: linking file `ltdl/libltdl/lt__dirent.h' | |
| libtoolize: linking file `ltdl/libltdl/lt__glibc.h' | |
| libtoolize: linking file `ltdl/libltdl/lt__private.h' | |
| libtoolize: linking file `ltdl/libltdl/lt__strl.h' | |
| libtoolize: linking file `ltdl/libltdl/lt_dlloader.h' | |
| libtoolize: linking file `ltdl/libltdl/lt_error.h' | |
| libtoolize: linking file `ltdl/libltdl/lt_system.h' | |
| libtoolize: linking file `ltdl/libltdl/slist.h' | |
| libtoolize: linking file `ltdl/loaders/preopen.c' | |
| libtoolize: linking file `ltdl/lt__alloc.c' | |
| libtoolize: linking file `ltdl/lt_dlloader.c' | |
| libtoolize: linking file `ltdl/lt_error.c' | |
| libtoolize: linking file `ltdl/ltdl.c' | |
| libtoolize: linking file `ltdl/ltdl.h' | |
| libtoolize: linking file `ltdl/slist.c' | |
| ]]) | |
| AT_DATA([configure.ac], | |
| [[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[) | |
| LT_CONFIG_LTDL_DIR([ltdl]) | |
| AC_CONFIG_AUX_DIR([ltdl/config]) | |
| AC_CONFIG_MACRO_DIR([ltdl/m4]) | |
| LT_INIT | |
| LTDL_INIT | |
| AC_OUTPUT | |
| ]]) | |
| AT_DATA([Makefile.am], | |
| [[ACLOCAL_AMFLAGS = -I ltdl/m4 | |
| ]]) | |
| ])# _LT_AT_LTDL_SETUP | |
| ## ------------------------------------------------ ## | |
| ## First we make sure libtoolize --ltdl is working. ## | |
| ## ------------------------------------------------ ## | |
| AT_SETUP([copy ltdl.m4 with shared macro directory]) | |
| _LT_AT_LTDL_SETUP | |
| LT_AT_CHECK_LIBTOOLIZE([--ltdl], 0, expout) | |
| AT_CLEANUP | |
| ## ----------------------------------------------------- ## | |
| ## And also that libtoolize is taking note of LTDL_INIT. ## | |
| ## ----------------------------------------------------- ## | |
| AT_SETUP([correctly parse LTDL_INIT from configure.ac]) | |
| _LT_AT_LTDL_SETUP | |
| LT_AT_CHECK_LIBTOOLIZE([], 0, expout) | |
| AT_CLEANUP | |
| ## ----------------------------------------------------------- ## | |
| ## And finally, that libtoolize diagnoses a missing LTDL_INIT. ## | |
| ## ----------------------------------------------------------- ## | |
| AT_SETUP([diagnose missing LTDL_INIT invocation]) | |
| AT_DATA(expout, | |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `ltdl/config'. | |
| libtoolize: copying file `ltdl/config/compile' | |
| libtoolize: copying file `ltdl/config/config.guess' | |
| libtoolize: copying file `ltdl/config/config.sub' | |
| libtoolize: copying file `ltdl/config/depcomp' | |
| libtoolize: copying file `ltdl/config/install-sh' | |
| libtoolize: copying file `ltdl/config/missing' | |
| libtoolize: copying file `ltdl/config/ltmain.sh' | |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `ltdl/m4'. | |
| libtoolize: copying file `ltdl/m4/argz.m4' | |
| libtoolize: copying file `ltdl/m4/libtool.m4' | |
| libtoolize: copying file `ltdl/m4/ltdl.m4' | |
| libtoolize: copying file `ltdl/m4/ltoptions.m4' | |
| libtoolize: copying file `ltdl/m4/ltsugar.m4' | |
| libtoolize: copying file `ltdl/m4/ltversion.m4' | |
| libtoolize: copying file `ltdl/m4/lt~obsolete.m4' | |
| libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, `ltdl'. | |
| libtoolize: copying file `ltdl/COPYING.LIB' | |
| libtoolize: copying file `ltdl/README' | |
| libtoolize: copying file `ltdl/Makefile.am' | |
| libtoolize: copying file `ltdl/configure.ac' | |
| libtoolize: copying file `ltdl/aclocal.m4' | |
| libtoolize: copying file `ltdl/Makefile.in' | |
| libtoolize: copying file `ltdl/config-h.in' | |
| libtoolize: copying file `ltdl/configure' | |
| libtoolize: copying file `ltdl/argz_.h' | |
| libtoolize: copying file `ltdl/argz.c' | |
| libtoolize: copying file `ltdl/loaders/dld_link.c' | |
| libtoolize: copying file `ltdl/loaders/dlopen.c' | |
| libtoolize: copying file `ltdl/loaders/dyld.c' | |
| libtoolize: copying file `ltdl/loaders/load_add_on.c' | |
| libtoolize: copying file `ltdl/loaders/loadlibrary.c' | |
| libtoolize: copying file `ltdl/loaders/shl_load.c' | |
| libtoolize: copying file `ltdl/lt__dirent.c' | |
| libtoolize: copying file `ltdl/lt__strl.c' | |
| libtoolize: copying file `ltdl/libltdl/lt__alloc.h' | |
| libtoolize: copying file `ltdl/libltdl/lt__dirent.h' | |
| libtoolize: copying file `ltdl/libltdl/lt__glibc.h' | |
| libtoolize: copying file `ltdl/libltdl/lt__private.h' | |
| libtoolize: copying file `ltdl/libltdl/lt__strl.h' | |
| libtoolize: copying file `ltdl/libltdl/lt_dlloader.h' | |
| libtoolize: copying file `ltdl/libltdl/lt_error.h' | |
| libtoolize: copying file `ltdl/libltdl/lt_system.h' | |
| libtoolize: copying file `ltdl/libltdl/slist.h' | |
| libtoolize: copying file `ltdl/loaders/preopen.c' | |
| libtoolize: copying file `ltdl/lt__alloc.c' | |
| libtoolize: copying file `ltdl/lt_dlloader.c' | |
| libtoolize: copying file `ltdl/lt_error.c' | |
| libtoolize: copying file `ltdl/ltdl.c' | |
| libtoolize: copying file `ltdl/ltdl.h' | |
| libtoolize: copying file `ltdl/slist.c' | |
| libtoolize: Remember to add `LTDL_INIT' to configure.ac. | |
| libtoolize: Consider adding `-I ltdl/m4' to ACLOCAL_AMFLAGS in Makefile.am. | |
| ]]) | |
| AT_DATA([configure.ac], | |
| [[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[) | |
| LT_CONFIG_LTDL_DIR([ltdl]) | |
| AC_CONFIG_AUX_DIR([ltdl/config]) | |
| AC_CONFIG_MACRO_DIR([ltdl/m4]) | |
| LT_INIT | |
| AC_OUTPUT | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--ltdl --copy], 0, expout) | |
| AT_CLEANUP | |
| m4_popdef([_LT_AT_LTDL_SETUP]) | |
| ## ------------------------------------------------------ ## | |
| ## Creating an aclocal.m4 without in-tree libtool macros. ## | |
| ## ------------------------------------------------------ ## | |
| AT_SETUP([upgrading verbatim style aclocal.m4]) | |
| AT_DATA([configure.ac], | |
| [[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[) | |
| AC_CONFIG_AUX_DIR([build-aux]) | |
| LT_INIT | |
| AC_OUTPUT | |
| ]]) | |
| AT_DATA([expout], | |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. | |
| libtoolize: copying file `build-aux/ltmain.sh' | |
| libtoolize: You should add the contents of the following files to `aclocal.m4': | |
| libtoolize: `/usr/local/share/aclocal/libtool.m4' | |
| libtoolize: `/usr/local/share/aclocal/ltoptions.m4' | |
| libtoolize: `/usr/local/share/aclocal/ltversion.m4' | |
| libtoolize: `/usr/local/share/aclocal/ltsugar.m4' | |
| libtoolize: `/usr/local/share/aclocal/lt~obsolete.m4' | |
| libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and | |
| libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. | |
| libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout) | |
| ## --------------------------------------- ## | |
| ## Upgrading a hand maintained aclocal.m4. ## | |
| ## --------------------------------------- ## | |
| AT_DATA([configure.ac], | |
| [[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[) | |
| AC_CONFIG_AUX_DIR([build-aux]) | |
| AC_CONFIG_MACRO_DIR([m4]) | |
| LT_INIT | |
| AC_OUTPUT | |
| ]]) | |
| AT_DATA([Makefile.am], | |
| [[ACLOCAL_AMFLAGS = -I m4 | |
| ]]) | |
| AT_DATA([aclocal.m4], | |
| [[# This should need upgrading: | |
| # serial 25 LT_INIT | |
| AC_DEFUN([LT_INIT], | |
| [blah]) | |
| # This is newer than the upgrade version: | |
| # serial 99999 ltoptions.m4 | |
| # This is older than the upgrade version: | |
| # serial 1 ltversion.m4 | |
| ]]) | |
| AT_DATA([expout], | |
| [[libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. | |
| libtoolize: copying file `m4/libtool.m4' | |
| libtoolize: copying file `m4/ltoptions.m4' | |
| libtoolize: copying file `m4/ltsugar.m4' | |
| libtoolize: You should add the contents of `m4/ltsugar.m4' to `aclocal.m4'. | |
| libtoolize: copying file `m4/ltversion.m4' | |
| libtoolize: You should add the contents of `m4/ltversion.m4' to `aclocal.m4'. | |
| libtoolize: copying file `m4/lt~obsolete.m4' | |
| libtoolize: You should add the contents of `m4/lt~obsolete.m4' to `aclocal.m4'. | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout) | |
| ## ------------------------------------------- ## | |
| ## Upgrading an aclocal maintained aclocal.m4. ## | |
| ## ------------------------------------------- ## | |
| LT_AT_ACLOCAL([-I m4]) | |
| rm -f m4/libtool.m4 m4/ltoptions.m4 | |
| # This file should be upgraded. | |
| AT_DATA([m4/libtool.m4], [[ | |
| # serial 25 LT_INIT | |
| AC_DEFUN([LT_INIT]) | |
| ]]) | |
| # This file has a very high serial number, and should be left unchanged. | |
| AT_DATA([m4/ltoptions.m4], [[ | |
| # serial 99999 ltoptions.m4 | |
| ]]) | |
| AT_DATA([expout], | |
| [[libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. | |
| libtoolize: copying file `m4/libtool.m4' | |
| ]]) | |
| AT_DATA([experr], | |
| [[libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout, experr) | |
| ## ----------------------------------------------------------- ## | |
| ## Now, a forced update to downgrade files with newer serials. ## | |
| ## ----------------------------------------------------------- ## | |
| AT_DATA(expout, | |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. | |
| libtoolize: copying file `build-aux/ltmain.sh' | |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. | |
| libtoolize: copying file `m4/libtool.m4' | |
| libtoolize: copying file `m4/ltoptions.m4' | |
| libtoolize: copying file `m4/ltsugar.m4' | |
| libtoolize: copying file `m4/ltversion.m4' | |
| libtoolize: copying file `m4/lt~obsolete.m4' | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy --force], 0, expout) | |
| AT_CLEANUP | |
| ## ------------------------------------------------------------------ ## | |
| ## Ensure libtoolize works when AC_CONFIG_MACRO_DIR is not specified. ## | |
| ## ------------------------------------------------------------------ ## | |
| AT_SETUP([verbatim aclocal.m4 w/o AC_CONFIG_MACRO_DIR]) | |
| AT_DATA([configure.ac], | |
| [[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[) | |
| LT_INIT | |
| AC_OUTPUT | |
| ]]) | |
| AT_DATA([aclocal.m4], | |
| [[# This should need upgrading: | |
| # serial 25 LT_INIT | |
| AC_DEFUN([LT_INIT], | |
| [blah]) | |
| # This is newer than the upgrade version: | |
| # serial 99999 ltoptions.m4 | |
| # This is older than the upgrade version: | |
| # serial 1 ltversion.m4 | |
| ]]) | |
| AT_DATA([expout], | |
| [[libtoolize: putting auxiliary files in `.'. | |
| libtoolize: copying file `./ltmain.sh' | |
| libtoolize: You should add the contents of the following files to `aclocal.m4': | |
| libtoolize: `/usr/local/share/aclocal/libtool.m4' | |
| libtoolize: `/usr/local/share/aclocal/ltversion.m4' | |
| libtoolize: `/usr/local/share/aclocal/ltsugar.m4' | |
| libtoolize: `/usr/local/share/aclocal/lt~obsolete.m4' | |
| libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and | |
| libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. | |
| libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout) | |
| ## ----------------------------------------------------------------------- ## | |
| ## Upgrading an aclocal maintained aclocal.m4 without AC_CONFIG_MACRO_DIR. ## | |
| ## ----------------------------------------------------------------------- ## | |
| LT_AT_ACLOCAL([-I $abs_top_srcdir/libltdl/m4]) | |
| ## The following code is adapted (and simplified) from libtoolize.m4sh | |
| #### | |
| : ${GREP="grep"} | |
| : ${SED="sed"} | |
| basename="s,^.*/,," | |
| # func_grep expression filename | |
| # Check whether EXPRESSION matches any line of FILENAME, without output. | |
| func_grep () | |
| { | |
| $GREP "$1" "$2" >/dev/null 2>&1 | |
| } | |
| # func_serial filename [macro_regex] | |
| # Output the value of the serial number comment in FILENAME, where the | |
| # comment line must also match MACRO_REGEX, if given. | |
| func_serial () | |
| { | |
| my_filename="$1" | |
| my_macro_regex="$2" | |
| my_sed_serial=' | |
| /^# serial [1-9][0-9.]*[ ]*'"$my_macro_regex"'[ ]*$/ { | |
| s,^# serial \([1-9][0-9.]*\).*$,\1, | |
| q | |
| } | |
| d' | |
| # Search FILENAME and all the files it m4_includes for a serial number | |
| # in the file that AC_DEFUNs MACRO_REGEX. | |
| my_serial= | |
| if test -z "$my_macro_regex" || | |
| test "$my_filename" = aclocal.m4 || | |
| test "$my_macro_regex" = `echo "$my_filename" | $SED "$basename"` || | |
| func_grep '^AC_DEFUN(\@<:@'"$my_macro_regex" "$my_filename" | |
| then | |
| my_serial=`$SED -e "$my_sed_serial" "$my_filename"` | |
| fi | |
| # If the file has no serial number, something is badly wrong! | |
| test -n "$my_serial" || exit 1 | |
| echo $my_serial | |
| } | |
| # Make the serial number in aclocal.m4 higher than installed ltoptions.m4, | |
| # and the others match the macro files that libtoolize will compare against. | |
| libtool_serial=`func_serial "$tst_aclocaldir/libtool.m4" LT_INIT` | |
| ltversion_serial=`func_serial "$tst_aclocaldir/ltversion.m4" ltversion.m4` | |
| ltsugar_serial=`func_serial "$tst_aclocaldir/ltsugar.m4" ltsugar.m4` | |
| lt_obsolete_serial=`func_serial "$tst_aclocaldir/lt~obsolete.m4" lt~obsolete.m4` | |
| $SED -e 's,^#.*serial.*ltoptions.m4$,# serial 99999 ltoptions.m4,' \ | |
| -e "s,^#.*serial.*libtool.m4\$,# serial $libtool_serial libtool.m4," \ | |
| -e "s,^#.*serial.*ltversion.m4\$,# serial $ltversion_serial ltversion.m4," \ | |
| -e "s,^#.*serial.*ltsugar.m4\$,# serial $ltsugar_serial ltsugar.m4," \ | |
| -e "s,^#.*serial.*lt~obsolete.m4\$,# serial $lt_obsolete_serial lt~obsolete.m4," \ | |
| < aclocal.m4 > aclocal.m4t | |
| mv -f aclocal.m4t aclocal.m4 | |
| AT_DATA([expout], | |
| [[libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and | |
| libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. | |
| libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout) | |
| ## --------------------- ## | |
| ## Now, a forced update. ## | |
| ## --------------------- ## | |
| AT_DATA(expout, | |
| [[libtoolize: putting auxiliary files in `.'. | |
| libtoolize: copying file `./ltmain.sh' | |
| libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and | |
| libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. | |
| libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy --force], 0, expout) | |
| AT_CLEANUP | |
| ## ------------------------------------------------------------- ## | |
| ## Check nonrecursive ltdl puts m4 files in AC_CONFIG_MACRO_DIR. ## | |
| ## ------------------------------------------------------------- ## | |
| AT_SETUP([nonrecursive ltdl with AC_CONFIG_MACRO_DIR]) | |
| AT_DATA(expout, | |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. | |
| libtoolize: copying file `build-aux/config.guess' | |
| libtoolize: copying file `build-aux/config.sub' | |
| libtoolize: copying file `build-aux/install-sh' | |
| libtoolize: copying file `build-aux/ltmain.sh' | |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. | |
| libtoolize: copying file `m4/argz.m4' | |
| libtoolize: copying file `m4/libtool.m4' | |
| libtoolize: copying file `m4/ltdl.m4' | |
| libtoolize: copying file `m4/ltoptions.m4' | |
| libtoolize: copying file `m4/ltsugar.m4' | |
| libtoolize: copying file `m4/ltversion.m4' | |
| libtoolize: copying file `m4/lt~obsolete.m4' | |
| libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, `ltdl'. | |
| libtoolize: copying file `ltdl/COPYING.LIB' | |
| libtoolize: copying file `ltdl/README' | |
| libtoolize: copying file `ltdl/argz_.h' | |
| libtoolize: copying file `ltdl/argz.c' | |
| libtoolize: copying file `ltdl/loaders/dld_link.c' | |
| libtoolize: copying file `ltdl/loaders/dlopen.c' | |
| libtoolize: copying file `ltdl/loaders/dyld.c' | |
| libtoolize: copying file `ltdl/loaders/load_add_on.c' | |
| libtoolize: copying file `ltdl/loaders/loadlibrary.c' | |
| libtoolize: copying file `ltdl/loaders/shl_load.c' | |
| libtoolize: copying file `ltdl/lt__dirent.c' | |
| libtoolize: copying file `ltdl/lt__strl.c' | |
| libtoolize: copying file `ltdl/libltdl/lt__alloc.h' | |
| libtoolize: copying file `ltdl/libltdl/lt__dirent.h' | |
| libtoolize: copying file `ltdl/libltdl/lt__glibc.h' | |
| libtoolize: copying file `ltdl/libltdl/lt__private.h' | |
| libtoolize: copying file `ltdl/libltdl/lt__strl.h' | |
| libtoolize: copying file `ltdl/libltdl/lt_dlloader.h' | |
| libtoolize: copying file `ltdl/libltdl/lt_error.h' | |
| libtoolize: copying file `ltdl/libltdl/lt_system.h' | |
| libtoolize: copying file `ltdl/libltdl/slist.h' | |
| libtoolize: copying file `ltdl/loaders/preopen.c' | |
| libtoolize: copying file `ltdl/lt__alloc.c' | |
| libtoolize: copying file `ltdl/lt_dlloader.c' | |
| libtoolize: copying file `ltdl/lt_error.c' | |
| libtoolize: copying file `ltdl/ltdl.c' | |
| libtoolize: copying file `ltdl/ltdl.h' | |
| libtoolize: copying file `ltdl/slist.c' | |
| libtoolize: creating file `ltdl/Makefile.inc' | |
| ]]) | |
| AT_DATA([configure.ac], | |
| [[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[) | |
| LT_CONFIG_LTDL_DIR([ltdl]) | |
| AC_CONFIG_AUX_DIR([build-aux]) | |
| AC_CONFIG_MACRO_DIR([m4]) | |
| LT_INIT | |
| LTDL_INIT([nonrecursive]) | |
| AC_OUTPUT | |
| ]]) | |
| AT_DATA([Makefile.am], | |
| [[ACLOCAL_AMFLAGS = -I m4 | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy --install --ltdl=ltdl], 0, expout) | |
| AT_CLEANUP | |
| ## -------------------------------------------------------- ## | |
| ## Check subproject ltdl with non-shared AC_CONFIG_.*_DIRs. ## | |
| ## -------------------------------------------------------- ## | |
| AT_SETUP([subproject ltdl with non-shared directories]) | |
| AT_DATA(expout, | |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. | |
| libtoolize: copying file `build-aux/config.guess' | |
| libtoolize: copying file `build-aux/config.sub' | |
| libtoolize: copying file `build-aux/install-sh' | |
| libtoolize: copying file `build-aux/ltmain.sh' | |
| libtoolize: putting auxiliary files in `build-aux'. | |
| libtoolize: copying file `ltdl/config/compile' | |
| libtoolize: copying file `ltdl/config/config.guess' | |
| libtoolize: copying file `ltdl/config/config.sub' | |
| libtoolize: copying file `ltdl/config/depcomp' | |
| libtoolize: copying file `ltdl/config/install-sh' | |
| libtoolize: copying file `ltdl/config/missing' | |
| libtoolize: copying file `ltdl/config/ltmain.sh' | |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `acm4'. | |
| libtoolize: copying file `acm4/argz.m4' | |
| libtoolize: copying file `acm4/libtool.m4' | |
| libtoolize: copying file `acm4/ltdl.m4' | |
| libtoolize: copying file `acm4/ltoptions.m4' | |
| libtoolize: copying file `acm4/ltsugar.m4' | |
| libtoolize: copying file `acm4/ltversion.m4' | |
| libtoolize: copying file `acm4/lt~obsolete.m4' | |
| libtoolize: putting macros in `ltdl/m4'. | |
| libtoolize: copying file `ltdl/m4/argz.m4' | |
| libtoolize: copying file `ltdl/m4/libtool.m4' | |
| libtoolize: copying file `ltdl/m4/ltdl.m4' | |
| libtoolize: copying file `ltdl/m4/ltoptions.m4' | |
| libtoolize: copying file `ltdl/m4/ltsugar.m4' | |
| libtoolize: copying file `ltdl/m4/ltversion.m4' | |
| libtoolize: copying file `ltdl/m4/lt~obsolete.m4' | |
| libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, `ltdl'. | |
| libtoolize: copying file `ltdl/COPYING.LIB' | |
| libtoolize: copying file `ltdl/README' | |
| libtoolize: copying file `ltdl/Makefile.am' | |
| libtoolize: copying file `ltdl/configure.ac' | |
| libtoolize: copying file `ltdl/aclocal.m4' | |
| libtoolize: copying file `ltdl/Makefile.in' | |
| libtoolize: copying file `ltdl/config-h.in' | |
| libtoolize: copying file `ltdl/configure' | |
| libtoolize: copying file `ltdl/argz_.h' | |
| libtoolize: copying file `ltdl/argz.c' | |
| libtoolize: copying file `ltdl/loaders/dld_link.c' | |
| libtoolize: copying file `ltdl/loaders/dlopen.c' | |
| libtoolize: copying file `ltdl/loaders/dyld.c' | |
| libtoolize: copying file `ltdl/loaders/load_add_on.c' | |
| libtoolize: copying file `ltdl/loaders/loadlibrary.c' | |
| libtoolize: copying file `ltdl/loaders/shl_load.c' | |
| libtoolize: copying file `ltdl/lt__dirent.c' | |
| libtoolize: copying file `ltdl/lt__strl.c' | |
| libtoolize: copying file `ltdl/libltdl/lt__alloc.h' | |
| libtoolize: copying file `ltdl/libltdl/lt__dirent.h' | |
| libtoolize: copying file `ltdl/libltdl/lt__glibc.h' | |
| libtoolize: copying file `ltdl/libltdl/lt__private.h' | |
| libtoolize: copying file `ltdl/libltdl/lt__strl.h' | |
| libtoolize: copying file `ltdl/libltdl/lt_dlloader.h' | |
| libtoolize: copying file `ltdl/libltdl/lt_error.h' | |
| libtoolize: copying file `ltdl/libltdl/lt_system.h' | |
| libtoolize: copying file `ltdl/libltdl/slist.h' | |
| libtoolize: copying file `ltdl/loaders/preopen.c' | |
| libtoolize: copying file `ltdl/lt__alloc.c' | |
| libtoolize: copying file `ltdl/lt_dlloader.c' | |
| libtoolize: copying file `ltdl/lt_error.c' | |
| libtoolize: copying file `ltdl/ltdl.c' | |
| libtoolize: copying file `ltdl/ltdl.h' | |
| libtoolize: copying file `ltdl/slist.c' | |
| libtoolize: Consider using `AC_CONFIG_AUX_DIR([ltdl/config])' in configure.ac. | |
| libtoolize: Consider using `AC_CONFIG_MACRO_DIR([ltdl/m4])' in configure.ac. | |
| libtoolize: Consider adding `-I ltdl/m4' to ACLOCAL_AMFLAGS in Makefile.am. | |
| ]]) | |
| AT_DATA([configure.ac], | |
| [[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[) | |
| LT_CONFIG_LTDL_DIR([ltdl]) | |
| AC_CONFIG_AUX_DIR([build-aux]) | |
| AC_CONFIG_MACRO_DIR([acm4]) | |
| LT_INIT | |
| LTDL_INIT([subproject]) | |
| AC_OUTPUT | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy --install], 0, expout) | |
| AT_CLEANUP | |
| ## --------------------------- ## | |
| ## Garbled LIBTOOLIZE_OPTIONS. ## | |
| ## --------------------------- ## | |
| AT_SETUP([LIBTOOLIZE_OPTIONS]) | |
| _LT_CONFIGURE_AC | |
| LIBTOOLIZE_OPTIONS="narf" | |
| export LIBTOOLIZE_OPTIONS | |
| AT_DATA(experr, | |
| [[libtoolize: garbled LIBTOOLIZE_OPTIONS near `narf' | |
| libtoolize: Try `libtoolize --help' for more information. | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 1, [ignore], experr) | |
| ## --------------------------- ## | |
| ## Unknown LIBTOOLIZE_OPTIONS. ## | |
| ## --------------------------- ## | |
| LIBTOOLIZE_OPTIONS=--no-such-option | |
| export LIBTOOLIZE_OPTIONS | |
| AT_DATA(experr, | |
| [[libtoolize: warning: unrecognized environment option `--no-such-option' | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, [ignore], experr) | |
| ## ----------------------------- ## | |
| ## --no-warn environment option. ## | |
| ## ----------------------------- ## | |
| LIBTOOLIZE_OPTIONS=--no-warn,--no-such-option | |
| export LIBTOOLIZE_OPTIONS | |
| AT_DATA(experr, [[]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, [ignore], experr) | |
| AT_CLEANUP | |
| ## ------------------------------------------------------ ## | |
| ## Remove file droppings from old libtoolize invocations. ## | |
| ## ------------------------------------------------------ ## | |
| AT_SETUP([cleanup old installation]) | |
| _LT_CONFIGURE_AC | |
| AT_DATA([Makefile.am], | |
| [[ACLOCAL_AMFLAGS = -I m4 | |
| ]]) | |
| AT_DATA([acinclude.m4], | |
| [[AC_DEFUN([LT_INIT], | |
| [: keep me, I might be hand maintained!]) # LT_INIT | |
| ]]) | |
| AT_DATA([libltdl/acinclude.m4], | |
| [[AC_DEFUN([LT_INIT], | |
| [: delete me, I was left here by on old libltdl build]) # LT_INIT | |
| ]]) | |
| LT_AT_CHECK_LIBTOOLIZE([--copy --force --ltdl], 0, [ignore]) | |
| # check files are left as expected | |
| AT_CHECK([grep 'keep me' acinclude.m4], 0, [ignore]) | |
| AT_CHECK([test -f libltdl/acinclude.m4], 1, [ignore], [ignore]) | |
| AT_CLEANUP | |