| 1999-12-03 Alexandre Oliva <oliva@lsd.ic.unicamp.br> |
| |
| * ltconfig.in (ac_compile): Use $ac_ext instead of .c. |
| (ac_link): Likewise. |
| (dlfcn.h, ac_try): Do not add filename, it is already in |
| ac_compile. |
| Reported by Stephane Conversy <Stephane.Conversy@lri.fr> |
| |
| * ltconfig.in (linux-gnu*): Disable hardcode_into_libs until it |
| works together with fast_install. |
| |
| * libtool.m4: Use host when --target is not specified. |
| |
| * configure.in: AC_SUBST variables that are used by ltconfig to |
| build libtool. |
| |
| * ltconfig.in (irix6*): Do not override deplibs_check_method |
| here. |
| |
| * libtool.m4: Do not AC_SUBST anything other than LIBTOOL. |
| |
| 1999-11-20 Michael Forster <email@michael-forster.de> |
| |
| * ltconfig.in (linux-gnu*): Set hardcode_into_libs=yes. |
| |
| 1999-11-29 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltconfig.in: Be friendlier to C++ compilers when testing |
| for dlopen support. |
| Reported by Stephan Kulow <coolo@itm.mu-luebeck.de> |
| |
| 1999-11-26 Gary V. Vaughan <gary@gnu.org> |
| |
| * libtool.m4: better use of $target instead of $host to support |
| cross compilation. |
| Reported by Sam Latinga <slouken@devolution.com> |
| |
| 1999-11-16 Thomas Tanner <tanner@ffii.org> |
| |
| * configure.in: generate ltconfig and ltmain.sh before configuring |
| libltdl |
| |
| 1999-11-04 Alexandre Oliva <oliva@lsd.ic.unicamp.br> |
| |
| * tests/sh.test: New test to detect uses of quotes within |
| backticks within quotes. |
| * ltconfig.in, ltmain.in: Fix detected errors. Mark false |
| positives with a comment that disables the detector. |
| Reported by Akim Demaille <akim@epita.fr> |
| |
| * configure.in: Move ltconfig and ltmain.sh generation back... |
| * Makefile.am: here. |
| |
| 1999-11-02 Thomas Tanner <tanner@ffii.org> |
| |
| * NEWS: updated |
| * THANKS: added Olly Betts and Pavel Roskin |
| * doc/libtool.texi: fix typo |
| |
| * fix major bugs which rendered libtool virtually |
| unusable (i.e. not portable): |
| * ltconfig.in: don't hardcode system dependent variables in ltconfig!! |
| but set sane defaults |
| * Makefile.am: pass variables from AC_LIBTOOL_SETUP to ltconfig |
| * libtool.m4: ditto, fix typo in AC_PROG_LD_RELOAD_FLAG |
| |
| * ltconfig.in: use old_deplibs for archives, too |
| remove second occurence of sysv5 |
| * ltmain.in: fix typo, fix the second occurence of -DPIC, too |
| |
| * libltdl/Makefile.am: increment version number, fix typo |
| * libltdl/ltdl.c (lt_dlsym): don't report an error if the |
| libltdl-style symbol name wasn't found |
| |
| 1999-11-02 Wolfgang Rapp <ulris@bn-ulm.de> |
| |
| * ltconfig.in: add support for Unixware (sysv4.2uw2*) |
| |
| 1999-10-29 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltmain.in: Damnit! Cygwin cvs committed all the |
| dos line endings. |
| |
| 1999-10-28 Stephane Conversy <Stephane.Conversy@lri.fr> |
| |
| * ltmain.in (-DPIC): changed the order of pic flags a little to |
| prevent upsetting the sgi c++ compiler. |
| |
| 1999-10-28 Olly Betts <olly@muscat.co.uk> |
| |
| * ltconfig.in (opt_cr): Handle crlf sequences output by the |
| mingw toolchain. |
| |
| * libtool.m4: Third time lucky, with Tor's patch. |
| |
| 1999-10-19 Tor Lillqvist <tml@iki.fi> |
| |
| * libtool.m4: these was a missing `*' in the -mno-cygwin |
| match. |
| * ltconfig.in (cygwin, ltdll_obj): fixed a quoting error. |
| (export_symbols_cmds): added missing cosmetic newline. |
| |
| 1999-10-18 Tor Lillqvist <tml@iki.fi> |
| |
| * libtool.m4: test command used == which should be =. |
| Support -mno-cygwin flag for building mingw32 dlls. |
| * ltconfig.in (file_magic_cmd): add missing quotes. |
| (deplibs_check_method): and here. |
| |
| 1999-10-16 Alexandre Oliva <oliva@lsd.ic.unicamp.br> |
| |
| * libltdl/ltdl.c (lt_dlopen): Do not search paths when the |
| specified library is not just a basename. |
| |
| 1999-10-10 Gary V. Vaughan <gary@gnu.org> |
| |
| * libtool.m4 (AC_PATH_FILE): new macro replaces |
| AC_PATH_TOOL_GREP_OUTPUT. |
| (AC_PATH_TOOL_PREFIX): new macro replaces |
| AC_PATH_PROG_GREP_OUTPUT. |
| (AC_LD_RELOAD_FLAG): migrated from ltconfig.in. |
| (AC_DEPLIBS_CHECK_METHOD): ditto. |
| * ltconfig.in (reload_flag): moved to libtool.m4. |
| (deplbs_check_method): ditto. |
| |
| 1999-10-07 Gary V. Vaughan <gary@gnu.org> |
| |
| * libtool.m4 (AC_PATH_PROG_VERSION_GREP): removed in favour of the |
| more general AC_PATH_PROG_GREP_OUTPUT. |
| (AC_PATH_TOOL_VERSION_GREP): removed in favour of the more general |
| AC_PATH_TOOL_GREP_OUTPUT. |
| (AC_PROG_LIBTOOL): Search for a working find program in the |
| user's PATH using the new macros. |
| |
| 1999-10-06 Gary V. Vaughan <gary@gnu.org> |
| |
| * NEWS: updtaed. |
| * ltconfig.in: Accept osf5. |
| Reported by Sascha Schumann <sascha@schumann.cx> |
| |
| 1999-10-04 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltmain.in (-no-install): This doesn't work on win32 since |
| the search path for libraries is not encoded in the binary, |
| and dlls not in $PATH won't be found. Fall back to -no-fast-install |
| instead. |
| |
| * ltmain.in (-no-fast-install): Wrapper script used to add the |
| exeext on again when naming the wrapped executable. |
| |
| 1999-10-03 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltconfig.in: Set $FILE to @FILE@ for substitution with |
| the value found in libtool.m4 at configure time. |
| * libtool.m4 (AC_PATH_TOOL_GREP_VERSION): New macro, combines |
| AC_PATH_PROG and AC_CHECK_TOOL with a test which greps the |
| output of $ac_dir/${ac_prefix}<tool> --version for a |
| given regex. |
| (AC_PATH_PROG_GREP_VERSION): New macro used by the above. |
| (AC_LIBTOOL_SETUP): Use the new macros to search the PATH |
| [starting at /usr/bin] for a file program which accepts |
| --version and has "file" in its --version output. |
| |
| 1999-10-03 Thomas Tanner <tanner@ffii.org> |
| |
| * NEWS: new -no-install flag |
| * configure.in: fix typo |
| * doc/libtool.texi(Link mode): document -no-install flag, |
| correct -no-fast-install docs |
| * libtool.m4: check for "file" command |
| * ltconfig.in: don't hardcode /usr/bin/file, remove second |
| definition of sysv5, replace linkopts -> linker_flags |
| * ltmain.in: add new -no-install flag, print help for -no-install |
| and -no-fast-install flags |
| |
| 1999-10-03 Olly Betts <olly@muscat.co.uk> |
| |
| * ltmain.in: always create output_objdir |
| |
| 1999-10-03 Pavel Roskin <pavel_roskin@geocities.com> |
| |
| * libltdl/Makefile.am: don't preserve file attributes when |
| installing the libltdl sources |
| |
| 1999-10-01 Gary V. Vaughan <gary@gnu.org> |
| |
| * configure.in (AC_OUTPUT_COMMANDS): generate ltmain.sh |
| * Makefile.am (ltmain.sh ltconfig): removed. Automake inserts the |
| rules to automatically call config.status. |
| |
| * libtool.m4: be sure to AC_SUBST values no longer tested in |
| ltconfig.in. |
| * ltconfig.in: replaced several of the simple feature tests with |
| substitutions from config.status. |
| * Makefile.am (ltconfig): generate ltconfig with config.status. |
| * configure.in (AC_OUTPUT): generate ltconfig with config.status. |
| |
| 1999-09-30 Donald Anderson <dda@world.std.com> |
| |
| * ltconfig.in (sco3.2v5): use pass_all deplibs_check_method |
| for SCO3.2. |
| |
| 1999-09-29 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltconfig.in (whole-archive-flag-spec): I had been |
| wondering why my file system was filling up with empty |
| files named `71'... seems I forgot to hold in the |
| shift key when redirecting stderr, 2>&1. Doh! |
| |
| 1999-09-29 Vadim <vadim@olly.ru> |
| |
| * ltconfig.in (sysv): More UW7 support. |
| |
| 1999-09-28 Albert Cheng <acheng@ncsa.uiuc.edu> |
| |
| * ltmain.in (shlibpath_var): ensure the variable is non-empty before |
| exporting it. |
| |
| 1999-09-27 Manfred Weichel <weichel@global.nacamar.de> |
| |
| * ltconfig.in (sysv5): Added support required for shared |
| library linking on SCO UW7. |
| |
| 1999-09-22 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltconfig.in (whole-archive-flag-spec): test whether the |
| version of GNU ld being used understands --whole-archive |
| before using it. |
| |
| 1999-09-19 Thomas Tanner <tanner@ffii.org> |
| |
| * ltmain.in: don't ignore convenience libraries for objects/archives |
| (temporary hack) |
| |
| 1999-09-14 Alexandre Oliva <oliva@lsd.ic.unicamp.br> |
| |
| * ltconfig.in (CDPATH): Set to `:' instead of empty. |
| * ltmain.in (CDPATH): Likewise. |
| Reported by Greg McGary <gkm@eng.ascend.com> |
| |
| 1999-08-24 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltconfig.in (ltdll.c, impgen.c): Prevent the shell from |
| expanding variables & backslash escapes when writing these |
| files to the libtool script. |
| |
| 1999-08-24 Thomas Tanner <tanner@ffii.org> |
| |
| * NEWS: mention fixes |
| * doc/PLATFORMS: GNU/Hurd update |
| * depdemo: make use of variables |
| * ltconfig.in: use CC -E when checking for ELF support |
| on NetBSD (reported by Todd Vierling <tv@pobox.com>), |
| replace all occurences of 'linkopts' with 'linker_flags' |
| * ltmain.in: move ltdll.c and impgen.c to ltconfig.in and |
| only add them to the libtool script if it's necessary |
| |
| 1999-08-24 Boyd Gerber <gerberb@zenez.com> |
| |
| * ltconfig.in: add support for UnixWare 7.X.X |
| * doc/PLATFORMS: add new platforms |
| |
| 1999-08-24 Pavel Roskin <pavel_roskin@geocities.com> |
| |
| * doc/libtool.texi: document use of noinst_LTLIBRARIES for |
| convenience libraries |
| |
| * ltconfig.in: check for freebsdelf3, not just freebsd3. |
| Set hardcode_into_libs=yes for FreeBSD 3.0 and 3.1 |
| |
| * ltmain.in: enable workaround for freebsdelf3.0 |
| |
| 1999-08-24 Bert Driehuis <bert_driehuis@nl.compuware.com> |
| |
| * ltconfig.in: export_dynamic_flag_spec is -rdynamic on BSD/OS |
| |
| 1999-08-07 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * libltdl/COPYING.LIB: Update to version 2.1. |
| * libltdl/ltdl.h, libltdl/ltdl.c: Update FSF address. |
| |
| 1999-08-03 Gary V. Vaughan <gary@gnu.org> |
| |
| * libtool.m4 (mingw*, AC_PROG_LD): use tr for carriage return |
| stripping. |
| * ltconfig.in: ditto. |
| From Olly Betts <olly@muscat.co.uk> |
| |
| 1999-08-02 Olly Betts <olly@muscat.co.uk> |
| |
| * doc/libtool.texi (Compile mode): typo correction. |
| (Link mode): and another. |
| (Release numbers): and another. |
| (Distributing libltdl): and another. |
| (Test descriptions): and another. |
| (libtool script contents): and one more. |
| |
| * libtool.m4 (AC_PROG_LD): strip carriage returns from the |
| output of gcc -print-prog-name=ld. |
| * ltconfig.in: ditto. |
| |
| 1999-07-30 Pavel Roskin <pavel_roskin@geocities.com> |
| |
| * ltmain.in: Ensure that gcc on HPsUX uses -fPIC, or else |
| initialised structures are sometimes emitted in the code section. |
| |
| 1999-07-30 Mumit Khan <khan@xraylith.wisc.edu> |
| |
| * ltconfig.in: Read line at a time to avoid tokenisation by |
| shell. |
| |
| 1999-07-29 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltmain.in: Fix creation of relative links to object files in |
| sub-dirs. |
| |
| 1999-07-29 Olly Betts <olly@muscat.co.uk> |
| |
| * ltconfig.in(cygwin mingw32, archive_expsym_cmds): Only compile |
| and link ltdll.c if the libtool.m4 macros discovered that it is |
| required. |
| |
| 1999-07-26 Olly Betts <olly@muscat.co.uk> |
| |
| * libtool.m4(cygwin mingw32, AC_LIBTOOL_SETUP): Oops. Fix some |
| typos made by Evil Gary while (mis)applying my patch :-). |
| |
| * libtool.m4(cygwin mingw32, AC_LIBTOOL_SETUP): On second |
| thoughts, only probe for -mdll vs -dll on mingw, and revert to |
| the old `-Wl,--dll -nostartfiles' on cygwin. |
| |
| 1999-07-24 Erez Zadok <ezk@cs.columbia.edu> |
| |
| * doc/PLATFORMS (i*86-*openbsd2.5): New platform. |
| Slight reordering of other bsd entries. |
| |
| 1999-07-24 Olly Betts <olly@muscat.co.uk> |
| |
| * NEWS: Note new user visible changes. |
| * libtool.m4 (mingw32, AC_LIBTOOL_SETUP): probe for -mdll vs -dll |
| under cygwin/mingw. |
| probe whether the cygwin/mingw library supplies a stub DllMain |
| (but this information isn't yet used). |
| * ltconfig.in (mingw32, extract_expsyms_cmds): if HOST_CC is set, |
| use that to build impgen so we can use it when cross-compiling. |
| use correct entry points for mingw so static C++ constructors get |
| called for code in the DLL. |
| * ltmain.in (impgen.c): define O_BINARY to 0 if it is not in the |
| system headers. |
| |
| 1999-07-24 Bert Driehuis <bert_driehuis@compuware.com> |
| |
| * ltconfig.in: Updated bsdi4 soname specs to be more like |
| linux as discussed on the bsdi mailing list. |
| |
| 1999-07-20 Gary V. Vaughan <gary@gnu.org> |
| |
| * configure.in (AC_PROG_RANLIB): No longer required as we now use |
| AC_CHECK_TOOL in AC_LIBTOOL_SETUP. |
| * libtool.m4 (AC_PROG_LIBTOOL): Pass the $build variable to |
| ltconfig. |
| (AC_PROG_RANLIB): replaced with AC_CHECK_TOOL. |
| * ltconfig.in (build): new variable to hold the build triplet |
| which is now checked for unless --no-verify is specified. |
| (--build): new argument to set the build triplet. |
| (ranlib): Prefer ${host_alias}-ranlib[.exe] if $build is different |
| to $host. |
| * doc/libtool.texi (Invoking ltconfig): Document --build option. |
| * NEWS: Note --build option. |
| |
| 1999-07-19 Erez Zadok <ezk@cs.columbia.edu> |
| |
| * doc/PLATFORMS: Updated mostly *bsd platforms. |
| |
| 1999-07-19 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * doc/libtool.texi (Porting inter-library dependencies): Typos |
| Reported by Petter Reinholdtsen <pere@hungry.com> |
| |
| 1999-07-17 Thomas Tanner <tanner@ffii.org> |
| |
| * NEWS, TODO: updated (pic flags) |
| * libtool.m4 (AC_PROG_LIBTOOL): added --with-pic flag |
| * ltconfig.in: new pic_mode variable and --prefer[-non]-pic flags, |
| fixed the strip check (reported by Keith Bostic <bostic@bostic.com>) |
| * ltmain.in (compile mode): build only PIC/non-PIC code depending |
| on pic_mode |
| * libltdl/README: document the supported dlopen interfaces |
| * doc/libtool.texi (tests): documented new tests |
| * tests/Makefile.am: added new tests |
| * tests/demo-pic.test: new test to test --with-pic |
| * tests/demo-nopic.test: new test to test --without-pic |
| * tests/build-relink2.test: variant of build-relink.test that |
| uses depdemo |
| |
| 1999-07-09 Olly Betts <olly@muscat.co.uk> |
| |
| * doc/libtool.texi (C++ Libraries): fixed a typo. |
| |
| 1999-07-06 Gary V. Vaughan <gary@gnu.org> |
| |
| * README-alpha: improved the release instructions to mention |
| actual list addresses for announcements, and urls for upload |
| locations. |
| |
| 1999-07-03 Thomas Tanner <tanner@ffii.org> |
| |
| * doc/PLATFORMS: 1.3b passes all tests on cygwin |
| |
| 1999-07-03 Pavel Roskin <pavel_roskin@geocities.com> |
| |
| * ltconfig.in: finish_cmds for FreeBSD removed |
| * depdemo/l3/Makefile.am: install libl3.la into an extra directory |
| |
| 1999-07-02 Gary V. Vaughan <gary@gnu.org> |
| |
| * configure.in: bumped version to 1.3c. |
| |
| GNU libtool 1.3b was released. |
| |
| * NEWS: inserted todays date. |
| |
| 1999-07-02 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * doc/PLATFORMS: Tested on as many platforms as possible for me. |
| |
| 1999-07-01 Thomas Tanner <tanner@ffii.org> |
| |
| * NEWS: updated |
| * doc/PLATFORMS: updated |
| * changed my email address |
| |
| 1999-06-30 Thomas Tanner <tanner@ffii.org> |
| |
| * demo/foo.h: use LT_PARAMS instead of LTDL_PARAMS (this is not libltdl) |
| * tests/build-relink.test: also check for hardcode_into_libs = yes, |
| if set, we need to relink at install-time |
| |
| 1999-06-29 Thomas Tanner <tanner@ffii.org> |
| |
| * NEWS: mention -no-fast-install, rename dummy to force |
| * doc/PLATFORMS: 1.3b passes all tests on GNU/Linux, |
| FreeBSD (2.2.6 and 3.1) |
| * doc/libtool.texi: it's possible to link libtool libraries |
| using -L and -l, better documentation of uninstall and clean mode, |
| rename dummy to force, documented -no-fast-install, |
| AC_LIBLTDL_* must be called before AC_PROG_LIBTOOL, |
| documented hardcode_into_libs and striplib/old_striplib, |
| * ltconfig.in: search for strip program, added hardcode_into_libs |
| and striplib/old_striplib variables, set strip commands for GNU strip, |
| on FreeBSD >= 3.2 set hardcode_into_libs to yes, |
| fast-install mode doesn't work if hardcode_into_libs = yes |
| * ltmain.in: reimplemented hardcoding into libraries: |
| new relink mode, preserve all libtool args, relink libraries |
| when installing if necessary |
| added -no-fast-install flag, removed unnecessary `dlname' |
| initialization, use striplib/old_striplib for stripping libraries, |
| dlname is always soname or in library_names so we don't need |
| to handle different file names |
| |
| 1999-06-29 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltconfig.in (freebsd*, shlibpath_overrides_runpath): Set to yes |
| up to release 3.1, and to no from 3.2 on. |
| Reported by Pavel Roskin <pavel_roskin@geocities.com> |
| |
| 1999-06-29 Pavel Roskin <pavel_roskin@geocities.com>, Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltconfig.in (freebsd*, shlibpath_overrides_runpath): Set to |
| yes; tested on 3.1-ELF by Pavel and on 2.2.6 by Alexandre. |
| |
| 1999-06-25 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltconfig.in (linux-gnu*, deplibs_check_method): Use pass_all on |
| alpha, x86 and sparc architectures by now, reverting to file_magic |
| at least on ARM, where it breaks. |
| |
| 1999-06-23 Thomas Tanner <tanner@ffii.org> |
| |
| * NEWS: updated |
| * README: added GNU Hurd to the supported platforms |
| * doc/libtool.texi: document `-dlpreopen dummy' |
| instead of `-dlopen dummy' |
| * libltdl/ltdl.c (strchr): fixed typo (missing star) |
| |
| 1999-06-23 Stephan Kulow <coolo@itm.mu-luebeck.de> |
| |
| * libltdl/ltdl.c (strrchr): fixed typo (missing star) |
| * libltdl/ltdl.c (trim): use `const' to silence -Wwrite-strings |
| |
| 1999-06-23 Olly Betts <olly@muscat.co.uk> |
| |
| * ltmain.in (ltdll.c): Support for crosscompiling from linux to |
| mingw32. |
| |
| 1999-06-23 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltconfig.in (cygwin, export_symbols_cmds): If there is already |
| an extracted and compiled ltdll.c, then don't delete, reextract |
| and recompile. |
| (cygwin, archive_expsym_cmds): Make sure the ltdll source has been |
| extracted and compiled before referencing the object, since there |
| are paths through the code which run archive_expsym_cmds without |
| running export_symbols_cmds. |
| |
| 1999-06-20 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltconfig.in: moved the test for NM after the test for |
| no_builtin_flag. |
| |
| 1999-06-20 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltconfig.in: Use sed '$q' instead of sed "" for copying ltmain, |
| just in case some sed does not support an empty command. |
| |
| * ltconfig.in (link_static_flag, ac_cv_prog_cc_static): Use the |
| latter in the test. |
| |
| 1999-06-18 Thomas Tanner <tanner@ffii.org> |
| |
| * ltconfig.in (bsdi4, deplibs_check_method): use a less restrictive |
| regex (reported by Chris P. Ross <cross@eng.us.uu.net>) |
| * ltmain.in: support `-dlopen dummy', define lt_preloaded_symbols |
| if dlself != no |
| * doc/libtool.texi (Compile and Link mode): document it, |
| documented the -Wc, -Wl flags, libtool does also support non C |
| source code |
| |
| 1999-06-18 Teun Burgers <burgers@ecn.nl> |
| |
| * ltconfig.in: CR/LF fix for broken DJGPP bash |
| * ltmain.in: CR/LF fix for DJGPP |
| |
| 1999-06-18 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltmain.in (outputname): When generating the executable wrapper |
| script, $outputname already has the $exeext suffix, so we needn't |
| add it again. |
| |
| 1999-06-16 Gary V. Vaughan <gary@gnu.org> |
| |
| * libltdl/configure.in (ac_cv_lib_dl_dlopen): missing "x" in test |
| comparison corrected. |
| |
| * libltdl/ltdl.c (sys_wll_open): libltdl expects this function to |
| fail if it is unable to physically load the library. Sadly, |
| LoadLibrary will search the loaded libraries for a match and |
| return one of them if the path search load fails. Simulate a |
| failure in this case for compatibility with the other APIs. |
| Also, LoadLibrary takes the liberty of adding `.dll' to library |
| names passed without an extension, we now add a trailing `.' to |
| prevent this from happening. |
| |
| 1999-06-15 Gary V. Vaughan <gary@gnu.org> |
| |
| * libltdl/ltdl.c (sys_wll_close): Strangely enough, Microsoft have |
| decided that LoadLibrary returns `0' for success, yet FreeLibrary |
| returns `0' for failure! The FreeLibrary call used to interpret |
| `0' as success for both functions. |
| |
| 1999-06-14 Thomas Tanner <tanner@ffii.org> |
| |
| * ltconfig.in: use eval when setting have_dlfcn_h, reformatting |
| |
| 1999-06-12 Thomas Tanner <tanner@ffii.org> |
| |
| * ltmain.in: store old archives in deplibs and old_deplibs, |
| retain the order of dependency libraries (even old archives), |
| determining the absolute directory name didn't work due to a typo, |
| add the library search paths of all dependency libraries when |
| linking a library (fixes IRIX 5.2 bug) |
| |
| 1999-06-10 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltconfig.in: Reverted June 6's patch for new GNU ld output, it |
| is no longer needed, as ld reverted to the original format. |
| * NEWS: Likewise. |
| |
| * ltconfig.in: When testing self-dlopening, test whether dlclose |
| crashes. On FreeBSD 3.1, it does. :-( |
| * libltdl/configure.in: Likewise. |
| * NEWS: Note work-around. |
| Reported by Pavel Roskin <pavel_roskin@geocities.com> |
| |
| 1999-06-09 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltconfig.in (exeext): autoconf's AC_EXEEXT uses "no" to indicate |
| no extension, and we must do the same in order to share the cache |
| value. Also we must ignore conftest.err which HPsUX (at least) |
| fills with gratuitous warnings. |
| (objext): for consistency, do the same as above. |
| Reported by Pavel Roskin <pavel_roskin@geocities.com> |
| |
| 1999-06-09 Pavel Roskin <pavel_roskin@geocities.com> |
| |
| * ltconfig.in (exeext): Use quotes in the test, to prevent a |
| failure in sh.test. |
| |
| 1999-06-09 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltconfig.in: Reordered tests to be more like configure.in's |
| recommended order (programs first, then libraries, etc.). |
| Performed a manual ``constant folding pass'' (eg: s/eval "test |
| \"echo '$''{'lt_cv_dlopen'+set}'`\" != set/test |
| "${lt_cv_dlopen+set}" != set/). |
| s/test "${foo+set}" = "set"/test "X${foo+set}" = Xset/g |
| |
| * ltconfig.in (link_static_flag): Accept, in order of decreasing |
| preference: the cached value; the default value for the current |
| host. Also test that the compiler accepts the flag, and cache |
| that result too. |
| |
| * ltconfig.in (pic_flag): Accept, in order of decreasing |
| preference: the cached value; the default value for the current |
| host. Also test that the compiler accepts the flag, and cache |
| that result too. |
| |
| 1999-06-08 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltconfig.in (LN_S): Accept, in order of decreasing preference: |
| the cached value; an environment setting; ``ln -s'' if it works; |
| ``ln'' if ``ln -s'' doesn't appear to work. |
| |
| * ltconfig.in (objext): Accept, in order of decreasing preference: |
| the cached value; the result of a test object compilation. |
| |
| * ltconfig.in (RANLIB): Accept, in order of decreasing preference: |
| the cached value; an environment setting; the first file called |
| ``ranlib'' in the user's path. |
| |
| * ltmain.in (exeext): Use $exeext when working out the names of |
| programs (but not the wrapper script itself due to a stupidity in |
| win32 which hardwires the .exe extension to the binary loader!). |
| * ltconfig.in (exeext): Now that the wrapper script tries to move |
| executables, we need to know whether they have an extension (ala |
| AC_EXEEXT). Since we can't rely on AC_EXEEXT having been called |
| in configure.in, we must be able to check for ourselves, though we |
| can look for a cached result incase AC_EXEEXT was called. |
| |
| * ltconfig.in (cygwin, pic_flag): Force separate compilation of |
| objects for dlls vs. objects for static archives. Using a cpp |
| macro also allows us to decide whether or not we need to use |
| dllexport/import declarations. |
| |
| * ltconfig.in (cygwin, need_version): Set to no, otherwise module |
| dll's end up with mighty long names! |
| |
| 1999-06-06 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltconfig.in: Support new GNU ld --help output format. |
| * NEWS: Likewise. |
| Reported by Gaël Quéri <gael@baoule.dyndns.org> and |
| H.J. Lu <hjl@varesearch.com>. |
| |
| 1999-06-05 Mark Kettenis <kettenis@gnu.org> |
| |
| * ltconfig.in: Update support for the Hurd. Make sure that the |
| soname includes the major version number and create the right |
| links. Allow shared objects without the `lib' prefix and without |
| version information. |
| |
| 1999-06-02 Nick Rasmussen <nick@jive.org> |
| |
| * ltmain.in (link): use "$nonopt" as the compiler for |
| compile/finalize_command |
| |
| 1999-05-27 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * TODO: Remove the short list of people interested in C++ |
| constructors; it's not meaningful, since there are so many more |
| people requesting this feature, and we just can't maintain it |
| accurate. |
| |
| 1999-05-27 Pavel Roskin <pavel_roskin@geocities.com> |
| |
| * ltconfig.in (GNU Hurd, deplibs_check_method): Use pass_all. |
| |
| 1999-05-27 Alexandre Oliva <oliva@dcc.unicamp.br>, Olly Betts <olly@muscat.co.uk> |
| |
| * ltmain.in: Expand convenience libraries when creating reloadable |
| objects. |
| * NEWS: Ditto. |
| |
| 1999-05-27 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * NEWS: Mention the two bugfixes below. |
| |
| * ltmain.in: Only create directory into which to extract |
| convenience libraries when $convenience is not empty. It would |
| always be created on systems that did not support |
| whole_archive_flag_spec. |
| |
| * ltconfig.in (export_symbols_cmds): Add $convenience. |
| (cygwin, export_symbols_cmds): Ditto. |
| * ltmain.in: Generate export symbol list before expanding |
| convenience libraries, to avoid passing whole_archive_flag_spec to |
| $NM. |
| Reported by Godmar Back <gback@cs.utah.edu> |
| |
| 1999-05-27 David Jones <jones@mosaid.com> |
| |
| * libltdl/ltdl.c (LTDL_BIND_FLAGS): Remove BIND_VERBOSE, to avoid |
| printing error messages. |
| |
| 1999-05-26 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| GNU libtool 1.3.2 was released. |
| |
| 1999-05-25 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * NEWS: List fixed problems. |
| * doc/PLATFORMS: Tested for 1.3.2. |
| |
| * config.guess: Synch with GNU common. |
| |
| * ltmain.in: Revert to stripping .exe on all platforms. |
| * TODO: Note about this problem. Demo is fixed on win32. Support |
| `empty' convenience libraries. |
| |
| * ltconfig.in (solaris*, ld_shlibs): Do not enable shared |
| libraries with GNU ld 2.8.*, it's broken. Emit a warning |
| suggesting an upgrade. |
| Reported by Brian Ford <ford@vss.fsi.com> and Ronald Pijnacker |
| <Ronald.Pijnacker@best.ms.philips.com> |
| |
| 1999-05-25 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * ltmain.in: file_magic check would not avoid cyclic links. |
| |
| 1999-05-25 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * depdemo/main.c, depdemo/l1/l1.c, depdemo/l2/l2.c: K&R-ize. |
| * depdemo/l3/l3.c, depdemo/l4/l4.c: Likewise. |
| |
| * ltmain.in: Remove object files before writing to them, to avoid |
| circular links. |
| Reported by Ron O'Hara <rono@sentuny.com.au> |
| |
| 1999-05-24 Thomas Tanner <tanner@ffii.org> |
| |
| * NEWS: support for installing stripped libraries using GNU strip |
| * ltconfig.in: set deplibs_check_method=pass_all on FreeBSD, |
| Linux and Solaris since no one can reproduce the famous deplibs |
| bug |
| * ltmain.in: preserve $CC (reported by Tom Tromey), |
| strip libraries using GNU strip if it's available and the |
| -s flag was passed to "install" |
| |
| 1999-05-23 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * doc/PLATFORMS: Release 1.3.1 passes on GNU Hurd/x86. |
| Reported by Pavel Roskin <pavel_roskin@geocities.com> |
| |
| 1999-05-23 Thomas Tanner <tanner@ffii.org> |
| |
| * ltmain.in: strip off the .exe suffix only on *Win |
| (Reported by Matthew D. Langston <langston@SLAC.Stanford.EDU>) |
| |
| 1999-05-22 Thomas Tanner <tanner@ffii.org> |
| |
| * NEWS: updated |
| * TODO: -Wc, -Wl, implemented |
| * AUTHORS: changed my email address |
| * doc/libtool.texi: fix "wierd" typo :) |
| * ltmain.in: linking against convenience libraries was broken, |
| implemented the "-Wc," "-Wl," "-Xcompiler" "-Xlinker" flag for |
| compiler and linker-specific flags, |
| add -lc before we do the deplibs check |
| * ltconfig.in: linkopts -> compiler_flags for $CC and linker_flags |
| for $LD, link_all_deplibs=yes on IRIX |
| |
| 1999-05-22 Gary V. Vaughan <gary@gnu.org> |
| |
| * NEWS: insert todays date alongside 1.3.1 release. |
| * Makefile.in: use gnu not gnits rules |
| * config.guess: synch with gnu common & apply Takabatake-san's |
| MIPS *000 patch. |
| * config.sub: synch with gnu common. |
| |
| 1999-05-22 Doug Evans <devans@casey.cygnus.com> |
| |
| * libltdl/configure.in (dlerror): Fix typo in dlopen found in -ldl |
| test. |
| |
| 1999-05-21 Pavel Roskin <pavel_roskin@geocities.com> |
| |
| * Makefile.am (EXTRA_DIST): Don't distribute instutils. |
| (install-data-hook): use libltdl/Makefile.am's local-install files |
| rule. |
| * libltdl/Makefile.am (local-install-files): New rule to install |
| libltdl without creating links or mode 777 directories. |
| * instutil/*: deleted. |
| |
| 1999-05-21 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * doc/PLATFORMS: Updated to 1.3.1 for all platforms I've got. |
| Added sparc-unknown-linux-gnu. |
| |
| 1999-05-21 Gary V. Vaughan <gary@gnu.org> |
| |
| * demo/foo.h: s/PARAMS/LTDL_PARAMS/g |
| * libltdl/ltdl.h: ditto. |
| * libltdl/ltdl.c: ditto. |
| |
| * demo/foo.h: s/__P/PARAMS/g |
| * libltdl/ltdl.h: ditto. |
| * libltdl/ltdl.c: ditto. |
| Reported by Akim Demaille <demaille@inf.enst.fr> |
| |
| 1999-05-20 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * NEWS: Updated docs. |
| * TODO: Recommend libtool.m4 to be inserted in acinclude.m4. AIX |
| 4.3.2.0 no longer fails on static dlopening. GNU DLD no longer |
| has to support .la files, since libltdl already does. Convenience |
| libraries and reloadable objects should be tested in the |
| testsuite. We could support some amount of control on the soname |
| of libraries. |
| * doc/libtool.texi: Notes about convenience libraries and |
| automake. Documented INCLTDL. |
| |
| 1999-05-20 Thomas Tanner <tanner@gmx.de> |
| |
| * cdemo/main.c: "Welcome _to_ ..." |
| * mdemo/main.c: ditto |
| * libltdl/configure.in: support multiple dlopening mechanisms |
| at once |
| * libltdl/ltdl.c: prefix system dependent functions with "sys_" |
| to avoid symbol conflicts (libdld didn't work) |
| * libtool.m4 (AC_LIBLTDL_*): set INCLTDL to the path of ltdl.h |
| * ltconfig.in: check for dlopen with -ldl first |
| |
| 1999-05-19 Gary V. Vaughan <gary@gnu.org> |
| |
| * NEWS: Added 1.3.1 news items. |
| * doc/PLATFORMS: updated the boxes I have access to, to 1.3.1 |
| in preparation for the next release. |
| |
| 1999-05-18 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltconfig.in (cygwin*, whole_archive_flag_spec): dlltool chokes |
| on this, so leave it unset in this case so that the ltmain code |
| knows it has to unpack convenience archives by itself. |
| |
| 1999-05-17 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltmain.in: Do not exit when an unknown library name is passed |
| passed in, simply warn and continue since some compilers require |
| -LANG:* like options to work. |
| Reported by Adam C. Powell, IV <adam.powell@nist.gov> |
| |
| 1999-05-17 Jiro Takabatake <jiro@din.or.jp> |
| |
| * ltconfig.in: port to NEC UX/4800. |
| * NEWS: updated. |
| |
| 1999-05-17 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltconfig.in (beos*, deplibs_check_method): set to pass_all. BeOS |
| is PIC by default. |
| Reported by "Shawn T . Amundson" <amundson@gimp.org> |
| |
| * libltdl/configure.in: Fix test failures on AIX 4.3.2 by checking |
| for dlopen *with* -ldl first. |
| Reported by Greg Wooledge <ic5035%tss1crs.amgreetings.com@rose.amgreetings.com> |
| |
| * demo/foo.h: Don't set any declspecs until we have full dll |
| support. |
| |
| 1999-05-16 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltconfig.in (solaris2.6, whole_archive_flag_spec): Do not use |
| -Wl for allextract. |
| |
| 1999-05-14 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * instutil/chmod: New script to avoid chmod'ing files while |
| installing libltdl's sources. |
| * instutil/ln: New script to avoid hard-linking libltdl's sources |
| in the install tree. |
| * Makefile.am (EXTRA_DIST): Dist them. |
| (instal-data-hook): Add srcdir/instutil to the beginning of the |
| PATH before installing libltdl's sources. |
| |
| 1999-05-09 Gary V. Vaughan <gary@gnu.org> |
| |
| * TODO: updated. |
| |
| 1999-05-06 Gary V. Vaughan <gary@gnu.org> |
| |
| * Makefile.am (install-data-hook): make sure the install directory |
| is not left world writable. |
| Reported by Andreas Schwab <schwab@issan.cs.uni-dortmund.de> |
| |
| 1999-04-30 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * libtool.m4: Use ifelse instead of if. |
| Reported by David Mazieres <dm@amsterdam.lcs.mit.edu> |
| |
| 1999-04-29 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| GNU Libtool 1.3 was released. |
| |
| * NEWS: Summarize news from 1.2 to 1.3. |
| |
| * ltmain.in: Save exit status of link_command before removing |
| symbol table object file. |
| |
| 1999-04-29 Gary V. Vaughan <gary@gnu.org> |
| |
| * doc/PLATFORMS: updated my hpux-10.20 and cygwin box entries. |
| |
| 1999-04-29 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * NEWS: Improved support for DU and IRIX too. |
| |
| * config.sub, config.guess: Updated from GNU common. |
| |
| * mdemo/configure.in: Move AC_LIBLTDL_CONVENIENCE before |
| AM_PROG_LIBTOOL, as suggested by autoconf. |
| |
| * doc/libtool.texi (Distributing libltdl): Document that -static |
| may cause the same problems on libltdl as -all-static. |
| * TODO: We might want to fix this in the future. |
| |
| * doc/libtool.texi: Clear up overfull hbox. |
| |
| * libltdl/Makefile.am (ltdl.lo): Add dependencies. |
| * libltdl/configure.in: Clean up some duplicate defines. Enable |
| support for multiple dlopening mechanisms. |
| * libltdl/acconfig.h: New file. Add #undefs for defines that |
| would be duplicated. |
| |
| 1999-04-29 Gary V. Vaughan <gary@gnu.org> |
| |
| * libtool.m4 (cygwin*|mingw*, DLLTOOL, OBJDUMP, AS): Only expand the |
| code that makes these configure time checks on hosts that need the |
| tools *and* if the AC_LIBTOOL_WIN32_DLL macro is used. |
| |
| 1999-04-29 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltmain.in (nlist, SYMFILE): Use outputname instead of output for |
| names within output_objdir. |
| |
| 1999-04-28 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * libtool.m4 (AC_ENABLE_SHARED, AC_ENABLE_STATIC, |
| AC_ENABLE_FAST_INSTALL): Do not call AC_BEFORE here, they're |
| AC_REQUIREd by AC_LIBTOOL_SETUP. |
| (AC_DISABLE_SHARED, AC_DISABLE_STATIC, AC_DISABLE_FAST_INSTALL): |
| Call AC_BEFORE here, and now with two arguments, since these do |
| change the default. |
| (AC_LIBLTDL_CONVENIENCE, AC_LIBLTDL_INSTALLABLE): Fix calls to |
| AC_BEFORE. |
| |
| 1999-04-28 Gary V. Vaughan <gary@gnu.org> |
| |
| * libtool.m4 (ltconfig_enable_win32_dll): pass --enable-win32-dll to |
| ltconfig if this is set. |
| (AC_LIBTOOL_WIN32_DLL): New macro required for libtool to attempt |
| a dll build on win32 hosts. |
| * ltconfig.in (--enable-win32-dll): new flag for the cli. |
| (cygwin*|mingw*|os2*, ltconfig_enable_win32_dll): if this is not set |
| to yes, then do not attempt to build shared libraries. |
| * doc/libtool.texi: document AC_LIBTOOL_WIN32_DLL. |
| * NEWS: noted new macro. |
| |
| 1999-04-27 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * libtool.m4 (AC_LIBTOOL_DLOPEN, AC_ENABLE_SHARED, |
| AC_ENABLE_STATIC, AC_ENABLE_FAST_INSTALL, AC_LIBLTDL_CONVENIENCE, |
| AC_LIBLTDL_INSTALLABLE): Warn if they appear after |
| AC_PROG_LIBTOOL. AC_LIBTOOL_SETUP, actually. |
| (AC_LIBTOOL_SETUP): Check whether DLOPEN support is to be enabled |
| at autoconf time, not configure time. Simplify code and |
| improve (?) help message about --disable-libtool-lock. |
| |
| 1999-04-27 Thomas Tanner <tanner@gmx.de> |
| |
| * NEWS: new clean mode |
| * THANKS: added Ossama Othman |
| * doc/libtool.texi: documented the new `clean' mode |
| * ltconfig.in: set need_version=no on OSF (reported by |
| Marcus Sundberg <mackan@stacken.kth.se>) |
| * ltmain.in: allow absolute non-existant -L paths, |
| always use output_objdir instead of objdir for temporary files, |
| delete generated temporary symbol lists, |
| don't add .la twice in the pseudo-library header, |
| implemented and documented clean mode (deletes libraries, |
| programs and object files and the files associated with them), |
| if build_libtool_libs=no and no static library is available, |
| try to link the program against the shared library, |
| don't add a statically linked library to the dependency_libs |
| * ltmain.in (help uninstall): added a missing backslash |
| after echo (reported by Ossama Othman) |
| |
| 1999-04-27 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltmain.in (old_archive_cmds): Iterate on oldobjs to find out |
| which links to object files we must create. Do not test for empty |
| pic_flag to create such links. Use objext when searching for |
| object files extracted from convenience library. |
| |
| * ltconfig.in (compiler_c_o): Make sure the compiler does not |
| create temporaries in the current directory when output should go |
| elsewhere. We must perform locking if it does. |
| |
| 1999-04-27 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltmain.in (old_archive_cmds): Ensure that there are always .o |
| objects available before running old_archive_cmds. |
| |
| 1999-04-26 Erez Zadok <ezk@cs.columbia.edu> |
| |
| * doc/PLATFORMS: Updates for netbsd 1.3.3 and 1.4. |
| |
| 1999-04-26 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltconfig.in (aix4.[01], always_export_symbols): The case pattern |
| would never match; fixed. |
| Reported by Stephan Kulow <coolo@itm.mu-luebeck.de> |
| |
| 1999-04-25 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * libtool.m4 (OBJDUMP): Pass it to ltconfig. |
| * configure.in: AC_SUBST DLLTOOL, OBJDUMP and AS. |
| * Makefile.am (libtool, clibtool): Pass them to ltconfig. |
| |
| 1999-04-25 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * libtool.m4 (cygwin*): Look for target objdump tool. |
| * ltconfig.in (cygwin*, file_magic_cmd): Use autoconf-located target |
| objdump tool. Track OBJDUMP like DLLTOOL and AS. |
| |
| * ltconfig.in (cygwin*, deplibs_check_method): Accept |
| "architecture: i386" as optional suffix, for it is printed on a |
| separate line sometimes. |
| |
| * ltmain.in (cygwin*, ltdll.c): Wrap DllMain declaration in extern "C". |
| |
| * ltmain.in (deplibs_check_method=file_magic): Redirect stderr to |
| /dev/null, to suppress error messages from target objdump. |
| |
| 1999-04-25 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltconfig.in (irix*, soname_spec, library_names_spec): Missing |
| dots before $versuffix and $major. |
| |
| * ltconfig.in (solaris*, whole_archive_flag_spec): Use -z |
| allextract/defaultextract from Solaris 2.6 on. |
| Reported by Brian Ford <ford@vss.fsi.com> |
| |
| * ltconfig.in (beos*, allow_undefined_flag): Do not build shared |
| libraries with undefined symbols. |
| |
| * ltconfig.in (aix4*, allow_undefined_flag): Set to -berok. |
| (aix4*, shared_flag): Set to -shared or ${wl}-bM:SRE. |
| (aix4*, archive_cmds): Use -bexpall. |
| (aix4*, archive_cmds, archive_expsym_cmds): Use shared_flag and |
| allow_undefined_flag. |
| (aix4*, always_export_symbols): Set to yes up to AIX 4.1.*, |
| because -bexpall is supported from 4.2 on. |
| Reported by Greg Wooledge |
| <ic5035%tss1crs.amgreetings.com@rose.amgreetings.com> |
| |
| * ltconfig.in (hpux*, hardcode_minus_L): Set to yes. |
| (hpux*, hardcode_libdir_flag_spec): Do not use +s by default. |
| (hpux*, shlibpath_overrides_runpath): Set to no. |
| |
| * ltconfig.in (irix*, osf*, archive_cmds): Write so_locations |
| within objdir. |
| |
| * ltconfig.in (irix*, soname_spec): Append $major. |
| (irix*, library_names_spec): Add new soname. |
| Reported by David Kaelbling <drk@sgi.com> |
| |
| * ltconfig.in (irix*, sys_lib_dlsearch_path_spec): /usr/local/lib |
| is not searched by default. /usr/lib is searched before /lib. |
| * ltconfig.in (irix*, sys_lib_search_path_spec): /usr/lib is |
| searched before /lib. |
| |
| * ltconfig.in (irix5*, need_lib_prefix, need_version): Set to no, |
| by unifying with irix6*. |
| |
| * ltconfig.in (irix*, osf*, deplibs_check_method): Use pass_all. |
| |
| * ltconfig.in (old_LDFLAGS, old_LIBS): Save and write to comments |
| in output file. |
| |
| * ltmain.in (prefer_static_libs): New variable, set to no by |
| default, but set to yes by -static and -all-static. Used instead |
| of build_libtool_libs to decide whether to use a shared or static |
| version of a library, when both versions are available. |
| |
| 1999-04-25 Boyd Lynn Gerber <gerberb@zenez.com> |
| |
| * ltconfig.in (sco3.2v5*): Use LD_RUN_PATH for hard-coding. |
| |
| 1999-04-25 Pavel Roskin <pavel_roskin@geocities.com> |
| |
| * Makefile.am (uninstall-local): Remove installed libltdl tree. |
| |
| 1999-04-25 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * demo/Makefile.am (hc-direct, hc-libflag, hc-libpath, hc-minusl): |
| Added CFLAGS to link commands; SCO OSR needs it for -belf. |
| |
| * TODO: -Wl and -Wc options. |
| |
| 1999-04-12 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * libltdl/ltdl.c: Remove trivial warnings. |
| |
| 1999-04-22 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * ltconfig.in: Correct sed expression that extracts symbols |
| from cygwin def files. Ignore demangled C++ names, if any. |
| |
| 1999-04-12 John David Anglin <dave.anglin@nrc.ca> |
| |
| * libltdl/ltdl.c (shl_close): shl_t was correct here... |
| (shl_sym): ... but we have to pass the handle by reference here. |
| |
| 1999-04-12 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * doc/libtool.texi (Invoking ltconfig): Document environment |
| variables used. |
| |
| * doc/libtool.texi (Invoking ltconfig): Document --cache-file. |
| |
| * doc/libtool.texi (Invoking ltconfig): Document |
| --disable-fast-install, --enable-dlopen, --with-gnu-ld and |
| --disable-lock. |
| |
| 1999-04-11 Thomas Tanner <tanner@gmx.de> |
| |
| * libltdl/configure.in: check for shl_load in libdld |
| * libltdl/ltdl.c (shl_close, shl_sym): use (shl_t *) instead of shl_t |
| * ltconfig.in (check for gcc): removed a bogus line, |
| check for shl_load in libdld |
| * ltmain.in: added a warning to the header of the .la file |
| to warn users against deleting the file, |
| link shared against static libraries if |
| deplibs_check_method == pass_all |
| |
| 1999-04-10 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * libtool.m4 (AC_PROG_LD, AC_PROG_NM): When looking for programs, |
| try $ac_exeext too, so that they're found on DJGPP/MS-DOS. |
| * ltconfig.in: Likewise. |
| Reported by Robert S. Maier <rsm@math.arizona.edu> |
| |
| * ltconfig.in (Usage): Removed --enable-dlopen-self. |
| Reported by Pavel Roskin <pavel_roskin@geocities.com> |
| |
| * ltconfig.in: Moved sysv4 before sysv4.*. |
| (symcode): Brian's overrider is specific to sysv4, not sysv4*. |
| |
| 1999-04-09 Thomas Tanner <tanner@gmx.de> |
| |
| * NEWS, README: Motorola System V 4 support |
| * doc/PLATFORMS: added mk88-motorola-sysv4 |
| * ltconfig.in: installed patch from Brian Ford <ford@vss.fsi.com> |
| to support mk88-motorola-sysv4 |
| |
| * doc/libtool.texi: some cleanups in the libltdl documentation |
| |
| 1999-04-07 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltconfig.in (--fallback-echo): Do not put an inline document and |
| an exec in the same if construct; otherwise the inline document |
| may not be removed. |
| * ltmain.in (--fallback-echo): Likewise. |
| Reported by John David Anglin <dave.anglin@nrc.ca> |
| |
| * dryrun.test: It would still fail at random times, because `cp' |
| and `mv' are not guaranteed to preserve the timestamps of the |
| installed files. Instead of preserving them, just remove them |
| before the dry uninstall test. Redirect dry-run output to stderr, |
| so that it can be easily separated from the regular output. |
| |
| 1999-04-07 Thomas Tanner <tanner@gmx.de> |
| |
| * NEWS: support for moved libraries |
| * libtool.m4: another DJGPP fix |
| |
| 1999-04-07 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * doc/PLATFORMS: Updated to 1.3 for all platforms I've got. I'll |
| make sure 1.3 won't be released unless it passes all tests on |
| those platforms. |
| |
| * doc/libtool.texi (Compile mode): Document potential problem and |
| work-around for `-c -o dir/foo.lo'. |
| |
| * tests/dryrun.test: The constant modifications of libtool would |
| cause main.o to be updated at the wrong time; the new approach is |
| to modify the libtool script so that it enables dry run depending |
| on whether an environment variable is set or not. I've also moved |
| `after' and `before' to a directory deep within $objdir, instead |
| of creating it in ../tests. |
| * tests/Makefile.am (CLEANFILES): Removed. |
| |
| 1999-04-06 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * tests/dryrun.test: We cannot rely on setting LIBTOOL, because |
| automake may use sub-makes, and the setting will not be propagated |
| to them on some makes. Instead, create a dry version of libtool |
| and switch between it and the original one before and after dry |
| runs. |
| * tests/Makefile.am (CLEANFILES): Added libtool-*, created by |
| dryrun.test. |
| |
| * tests/dryrun.test: Use cmp instead of diff. |
| (before, after): Create them within ../tests. |
| (libtool): Set to `/bin/sh ./libtool' by default, but use LIBTOOL, |
| SHELL and top_builddir from the environment if available. For dry |
| runs, use "$libtool -n". |
| * tests/Makefile.am (CLEANFILES): Added before and after. |
| * ltmain.in: Do not create links to object files in dry runs. |
| |
| 1999-04-06 Thomas Tanner <tanner@gmx.de> |
| |
| * ltmain.in: added a missing line of the ILD patch |
| |
| * NEWS: improved DJGPP support |
| * doc/libtool.texi: removed hardcode_into_libs documentation |
| * libtool.m4: some DJGPP fixes |
| * ltconfig.in: ditto, reverted one of my previous patches: we need |
| to check for NM, removed the hardcode_into_libs support since |
| no platform seems to support it |
| * ltmain.in: some DJGPP fixes, removed the hardcode_into_libs support |
| |
| 1999-04-05 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltconfig.in (netbsd*, GNU ld): Support a.out shared libraries |
| |
| * Makefile.am (CVS): allow command-line overriding of cvs |
| |
| * ltconfig.in (exclude_expsyms): Exclude _GLOBAL_OFFSET_TABLE_ by |
| default, as most a.out platforms use it, and end up in trouble if |
| we preload it, so it's safer to rule it out by default, and |
| special case its removal from exclude_expsyms if someone ever |
| complains. |
| |
| 1999-04-05 Thomas Tanner <tanner@gmx.de> |
| |
| * doc/libtool.texi: reorder tests to reflect execution order, |
| documented dryrun.test and depdemo* |
| * ltmain.in (lt_preloaded_symbols): dry-run mode bugfix |
| * tests/dryrun.test: new test to check whether the dry-run |
| mode works properly |
| |
| * demo/run.test: removed the unnecessary test |
| * demo/Makefile.am: ditto |
| * ltmain.in: set the DLL search path on cygwin,mingw and os2 |
| |
| 1999-04-04 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltconfig.in (sunos4*, GNU ld): -Bstatic is not enough for |
| deplibs.test to work with GNU ld; -Bshareable is needed here. |
| |
| * ltconfig.in (ld_shlibs, amigaos*): Disable shared libs with |
| native ld too. |
| |
| * ltconfig.in (sunos4*, GNU ld): Reordered. |
| |
| * ltconfig.in (archive_cmds, sunos4*): Revert to -Bstatic; the |
| native linker doesn't even support -Bshareable, only GNU ld does. |
| Do not use `gcc -shared' in archive_cmds, it breaks deplibs.test. |
| |
| * ltconfig.in: if ld_shlibs=no, set can_build_shared=no too, |
| otherwise it will just be disregarded. This would cause |
| netbsd/m68k with GNU ld a.out, and certainly many other platforms, |
| to incorrectly believe that shared libraries were supported, while |
| archive_cmds was empty, causing shared libraries not to be created |
| |
| 1999-04-03 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * NEWS: improved support for AIX and HP/UX |
| |
| 1999-04-03 Thomas Tanner <tanner@gmx.de> |
| |
| * NEWS: updated |
| * libtool.m4: check for main in libm instead of cos |
| * ltmain.in: cosmetic fixes, don't try to link libraries only once |
| (although it's not necessary on many platforms and looks ugly...), |
| |
| 1999-04-02 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltmain.in (convenience): fixed race condition when more than one |
| library was linked with the same convenience library by |
| uniquifying the extract directory. It is now named after the new |
| library *and* the old one, and lives in the objdir of the new one. |
| |
| * ltmain.in (-L*): do not abort just because a directory specified |
| with -L does not exist; just warn and discard it |
| |
| * depdemo/l1/Makefile.am (AUTOMAKE_OPTIONS): no-dependencies |
| * depdemo/l2/Makefile.am (AUTOMAKE_OPTIONS): ditto |
| * depdemo/l3/Makefile.am (AUTOMAKE_OPTIONS): ditto |
| * depdemo/l4/Makefile.am (AUTOMAKE_OPTIONS): ditto |
| |
| * ltconfig.in (archive_cmds, sunos4*): where we used -Bstatic, we |
| should have been using -Bshareable |
| |
| * demo/Makefile.am (CLEANFILES): clean EXTRA_* from deplibs-check |
| |
| * libtool.m4 (LDFLAGS, LIBS): pass them to ltconfig, for the tests |
| that involve linking |
| * Makefile.am (LDFLAGS, LIBS, libtool, clibtool): ditto |
| * tests/Makefile.am (CFLAGS, CPPFLAGS, LDFLAGS, LIBS): set |
| (LDFLAGS, LIBS, TESTS_ENVIRONMENT): pass them down |
| |
| 1999-04-02 Erez Zadok <ezk@cs.columbia.edu> |
| |
| * doc/PLATFORMS: 1.2f ok on various versions of hpux cc |
| |
| 1999-04-02 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltconfig.in (link_all_deplibs): set to unknown by default |
| * ltmain.in: test != no, not = yes |
| * doc/libtool.texi: document unknown |
| |
| 1999-04-01 Thomas Tanner <tanner@gmx.de> |
| |
| * doc/libtool.texi: documented deplibs.test |
| |
| * demo/Makefile.am: moved testsuite specific declarations to the end, |
| the deplibs check is now optional |
| * libltdl/configure.in: read libtool --config only once, |
| merged AC_SYS_SYMBOL_UNDERSCORE+AC_SYS_NM_PARSE from libtool.m4 |
| * libtool.m4: AC_SYS_SYMBOL_UNDERSCORE+AC_SYS_NM_PARSE were not |
| used, lt_dlopen and silent may be empty, AC_SYS_LIBTOOL_CYGWIN |
| no longer necessary |
| * ltconfig.in: NM is already checked in libtool.m4, |
| * ltmain.in: always link all static dependency_libs |
| * tests/Makefile.am: added deplibs.test |
| * tests/demo-exec.test, demo-inst.test: removed hell0 |
| * tests/deplibs.test: new test to test the deplibs_check_method |
| |
| 1999-03-31 Thomas Tanner <tanner@gmx.de> |
| |
| * ltmain.in: always link a library before its dependency libs |
| * mdemo/Makefile.am: test -export-symbols-regex |
| |
| 1999-03-30 Thomas Tanner <tanner@gmx.de> |
| |
| * doc/libtool.texi: fixed a typo |
| * libtoolize.in: add the libtool scripts to libltdl.tar.gz |
| * libtool.m4: don't AC_SUBST(USE_SYMBOL_UNDERSCORE), |
| AC_CHECK_LIBM sets LIBM, AC_LIBLTDL_INSTALLABLE doesn't work |
| when libltdl is already installed |
| * *demo/Makefile.am: use LIBM |
| * *demo/configure.in: AC_SUBST LIBM |
| * libltdl/configure.in: use ac_cv_sys_symbol_underscore instead of |
| USE_SYMBOL_UNDERSCORE |
| * ltconfig.in: added link_all_deplibs variable |
| * doc/libtool.texi: document it |
| * ltmain.in: always search for libname.la - don't eval libname_spec, |
| when linking libraries against static ones just print a warning |
| and add them to dependency_libs, add -lc before deplibs, |
| always link all dependencies of a static library or if |
| link_all_deplibs is yes, hardcode library paths if |
| hardcode_into_libs is no, don't link against dependency_libs |
| that already are deplibs |
| |
| 1999-03-30 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltconfig.in (aix4*, collect2name): make sure collect2 exists |
| before running string on it, to avoid errors on old gccs |
| Reported by Erez Zadok <ezk@cs.columbia.edu> |
| |
| * ltconfig.in (aix4*, hardcode_libdir_flag_spec): unless we're |
| using gcc with old collect2, use -b libpath to hardcode the |
| library search path |
| |
| * ltmain.in, ltconfig.in: reverted most of the quoting changes |
| from 1999-03-25; Gary's delay_variable_subst patch from 1999-02-19 |
| obviates it. Keep only quoting of $PATH, for uniformity with |
| other systems that already did it |
| |
| 1999-03-29 Gary V. Vaughan <gary@gnu.org> |
| |
| * libltdl/ltdl.c (lt_dladdsearchdir): Forgot to mallocate the |
| extra byte of memory for the teminating NUL, and forgot to |
| strcpy the original path in to the new memory before appending |
| the new path compononent. |
| |
| 1999-03-27 Thomas Tanner <tanner@gmx.de> |
| |
| * NEWS: updated |
| * README: updated (BeOS support, no longer shared libraries |
| support for AmigaOS), cleanups, we have now two mailing lists |
| * REAMDE-alpha: autogen -> bootstrap, we have now two mailing lists |
| * THANKS: added Xavier Pianet |
| * doc/PLATFORMS: BeOS works |
| * doc/libtool.texi: we have now to two mailing lists, |
| updated -dlopen self documentation, documented libltdl's license, |
| put each author in a separate line, |
| inter-library dependencies on uninstalled libtool libraries are |
| now supported, cleanups and minor corrections |
| * libltdl/COPYING.LIB: new file |
| * libltdl/ltdl.[ch]: added special exception to the LGPL license |
| * libtool.spec: removed, it was outdated |
| * Makefile.am: removed libtool.spec |
| * ltmain.in: use TMPDIR when possible, create a subdirectory |
| in the temporary directory, added -export-symbols-regex to the help, |
| |
| 1999-03-25 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * demo/Makefile.am: create a static library, link two libtool |
| archives with it, then link the program hell0 with both |
| * demo/hell1.c, demo/hell2.c: dummy files used to create the |
| libtool archives without introducing symbol conflicts |
| * tests/demo-exec.test, tests/demo-inst.test: run the new program |
| * ltconfig.in (irix5*, irix6*, deplibs_check_method): pass_all |
| |
| * ltmain.in ($PATH): instead of modifying the PATH, better prevent |
| its expansion the first time *_cmds variables are eval'ed. Modify |
| $show within loops that eval them so as to expand variables |
| * ltconfig.in (*_cmds): quote $ so that they're not expanded by |
| the first eval |
| |
| 1999-03-25 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltmain.in ($PATH): Expand any tildes in the users path to the |
| contents of $HOME to avoid problems with *_cmds splitting and |
| evaluation. |
| |
| 1999-03-24 Thomas Tanner <tanner@gmx.de> |
| |
| * TODO: support -dlopen for libraries |
| * doc/PLATFORMS: Erez Zadok reported that libtool works on bsdi 4.0.1 |
| * doc/libtool.texi (libltdl): libltdl supports BeOS |
| * libltdl/ltdl.c: shlib_ext was declared even if LTDL_SHLIB_EXT |
| didn't exist, partially reverted my previous patch: BeOS will |
| automatically search in ADDON_PATH |
| * ltmain.in: don't allow relative run-paths, fixed a typo in a warning, |
| ignore -dlopen self for libraries and objects, |
| only accept -L paths that exist, minor cleanups, |
| bugfix: add -lc for normal libraries, not convenicence libraries |
| removed offensive warnings/comments |
| |
| 1999-03-24 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltconfig.in (ld_shlibs, amigaos*): disable shared libraries |
| |
| 1999-03-23 Gary V. Vaughan <gary@gnu.org> |
| |
| * libltdl/configure.in: the sed expression for finding the shared |
| library extension used to think the . in [.] for the cygwin |
| shared_library_names_spec was the start of the extension!! We now |
| remove anything in square brackets (assuming that the square |
| brackets delimit a sed or expr expression which is not part of the |
| extension) before looking for the extension. |
| |
| * TODO (cygwin): food for thought re: mutually dependant dlls. |
| |
| 1999-03-21 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * tests/build-relink.test: if we relink and have hardcode_direct, |
| removing an uninstalled library breaks an uninstalled program |
| |
| * doc/libtool.texi: documented convenience libraries |
| * TODO: removed entry about it |
| |
| * tests/*-unst.test: if directory is not configured, skip it |
| * tests/demo.test, tests/mdemo.test: unused, removed |
| * tests/depdemo.test: ditto |
| |
| 1999-03-20 Thomas Tanner <tanner@gmx.de> |
| |
| * doc/libtool.texi (link mode): documentation for -module updated |
| * ltconfig.in: fast-install mode doesn't work for |
| hardcode_into_libs=yes |
| * ltmain.in: bugfix: "-dlopen self [-all]-static" wouldn't use |
| dlopen_self_static, automatically enable -export-dynamic when |
| using "-dlopen self", always make run-paths absolute, |
| ignore -lc only on platforms that don't have such a library, |
| cleanups in the ILD code, find even installed libtool libraries |
| that were moved, before generating the DLL-import library we need |
| to set libname, improved hardcoding of shlibpath for libraries, |
| don't generate an installable pseudo-library for convenience |
| libraries, bugfix: export_symbols would be removed immediately |
| before it is used |
| |
| 1999-03-19 Thomas Tanner <tanner@gmx.de> |
| |
| * use the same header in all configure.in's and Makefile.am's |
| * NEWS: improved support for BeOS and Cygwin |
| * TODO: ILD branch was merged, all internal variables and macros |
| are now documented |
| * demo/Makefile.am: use $(LIBS) instead of -lm |
| * doc/libtool.texi: documented new variable hardcode_into_libs |
| and thread_safe_flag_spec, renamed all AM_ENABLE/DISABLE_* macros |
| to AC_*, documented AC_DISABLE_FAST_INSTALL and AC_LIBTOOL_DLOPEN |
| * libltdl/ltdl.c: added two new error messages (cannot_open_error, |
| cannot_close_error), use them where approriate, |
| BeOS support (thanks to Xavier Pianet), on BeOS search modules |
| additionally in ADDON_PATH |
| * libtool.m4: rewrote AC_CHECK_LIBM: BeOS and Cygwin don't have |
| libm and *-ncr-sysv4.3* requires libmw |
| * ltconfig.in: don't check for LoadLibrary, hardcode dlopen |
| configuration for BeOS and Cygwin |
| * ltmain.in: fix sourcing of .la files on Solaris |
| (patch by Raja R Harinath) |
| |
| 1999-03-19 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltconfig.in (sunos4*, with_gnu_ld, hardcode_minus_L): remove, we |
| have -rpath |
| (aix4*, without_gnu_ld, hardcode_shlibpath_var): unsupported is |
| default |
| (hpux9*, hpux10*, hpux11*, archive_cmds): drop +s, unneeded here |
| (hpux9*, hpux10*, hpux11*, hardcode_libdir_flag_spec): add +s |
| before +b |
| (hpux9*, hpux10*, hpux11*, shlibpath_overrides_runpath): since +s |
| appears before +b, set it to yes |
| (hardcode_shlibpath_var, hardcode_action): do not use |
| shlibpath_var to specify the compile-time search path; it loses, |
| and we may end up linking with pre-installed older versions of |
| libraries instead of yet-to-be-installed ones |
| (*, hardcode_direct, hardcode_minus_L): remove entries that set |
| them to no, that is default |
| |
| * demo/Makefile.am (hc-direct, hc-libpath, hc-minusL): link with |
| $$hardcode_libdir_flag_spec, if available, with libdir=$(libdir), |
| to make sure the hardcode_* variables will produce the expected |
| results even in the presence of a hardcoding flag; depend on |
| libhello.la having been installed already |
| (hc-libflag): link with the installed library, but try to |
| hard-code the uninstalled one |
| * doc/libtool.texi: document the changes |
| |
| * tests/*.test: when a test fails, skip tests that depend on it. |
| If a certain configuration is not supported, skip all its tests. |
| |
| * doc/libtool.texi: reorder tests to reflect execution order |
| |
| * tests/noinst-link.test: new test |
| * tests/Makefile.am (TESTS): added noinst-link.test |
| * doc/libtool.texi: document it |
| |
| 1999-03-19 Gary V. Vaughan <gary@gnu.org> |
| |
| * ltmain.in (dependency_libs): There is no reason to infer that |
| the pseudo library is invalid if dependency_libs='' at |
| install-time, or else libltdl/libltdl.la is invalid!! |
| |
| 1999-03-18 Thomas Tanner <tanner@gmx.de> |
| |
| * merged my inter-library dependencies code from the ILD branch: |
| * NEWS: inter-library dependencies are now supported |
| * configure.in: add the depdemo subdirectory |
| * depdemo/*: new demo to demonstrate inter-library dependencies |
| * tests/depdemo*: new tests for depdemo |
| * ltconfig.in: added hardcode_into_libs (whether library paths |
| should be hardcoded into the libraries), |
| it currently defaults to 'no' |
| * ltmain.in: new internal 'relink' mode to relink libraries |
| on platforms with hardcode_into_libs=yes, save command line |
| arguments in libtool_args, accept relative -L directories, |
| ignore -lm on BeOS and Cygwin, always ignore -lc, |
| handle -l, -L and .la arguments later, always make the library |
| installation directory (-rpath) absolute, in relink mode don't |
| delete the not-relinked library and exit immediately after relinking, |
| try to find already-installed libtool libraries that were specified |
| using -l, support hardcoding of library paths into libraries too, |
| export shlibpath before linking libraries, and a lot of other |
| big changes that I don't want to describe here... please read |
| the source. |
| |
| * merged Gary's Win32 code from the ILD branch: |
| * NEWS: Win32 DLLs are now supported |
| * TODO: removed .a library namespace clash for win32. It is |
| now resolved. |
| * ltconfig.in (cygwin, library_names_spec): removed $libname.a. |
| Creating a dll with libtool no longer creates an import library. |
| * ltconfig.in (extract_expsyms_cmds): Create $objdir if it does |
| not exist -- i.e. we need to generate import an import library |
| in a directory which has no libs of its own. |
| * doc/libtool.texi (old_archive_from_expsyms_cmds, |
| extract_expsyms_cmds): documented these new variables. |
| * ltconfig.in (extract_expsyms_cmds): New variable. Commands to |
| extract the exported symbol list from a dll. |
| (old_archive_from_expsyms_cmds): New variable. Commands to build |
| an old archive from the extracted expsyms list. |
| * ltmain.in: run the cmds in extract_expsyms_cmds and |
| old_archive_from_expsyms_cmds as necessary. |
| * ltconfig.in (cygwin, old_archive_from_new_cmds): no longer |
| required. |
| * ltconfig.in (cygwin, shlibpath_overrides_runpath): I'm not even |
| sure whether win32 honours the runpath at all when searching for |
| a dll to load! Anyway, when set to yes this prevents a gratuitous |
| warning. |
| * ltmain.in (deplib): The cygwin environment doesn't actually have |
| -lm, and although the linker fakes having one, specifiying it to |
| libtool will break ILD, so we ignore it when generating |
| dependencies. |
| |
| 1999-03-17 Gary V. Vaughan <gary@gnu.org> |
| |
| * doc/PLATFORMS: Thanks to Alexandres changes below, both my |
| hp boxes pass the entire test suite. |
| |
| 1999-03-17 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltconfig.in (hpux*, hardcode_minus_L): should be no, we have +b |
| (hpux*, hardcode_libdir_separator): set to colon |
| |
| 1999-03-17 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * doc/PLATFORMS: egcs is gcc; updates from Erez Zadok |
| |
| 1999-03-16 Alexandre Oliva <oliva@dcc.unicamp.br> |
| |
| * ltmain.in (deplibs, beos*): don't append -lc |
| Reported by Xavier Pianet <xavier@xingo.com> |
| |
| * tests/build-relink.test (hardcode_action): when set to relink, |
| skip the test with lt-hell |
| |
| * Makefile.am (EXTRA_DIST): add mkstamp |
| Reported by Xavier Pianet <xavier@xingo.com> |
| |
| * Makefile.am (EXTRA_DIST): add ChangeLog.0 |
| |
| 1999-03-16 Thomas Tanner <tanner@gmx.de> |
| |
| * doc/libtool.texi: some minor corrections to the "-dlopen self" |
| documentation |
| * tests/Makefile.am: sorted by name, added assign.test |
| * ChangeLog: started new file |
| |
| * ltconfig.in: some cosmetical changes |
| * ltmain.in: ditto |
| |
| Continued in ChangeLog.0 |
| |
| $Revision$ $Date$ |
