NEWS

GNU m4 NEWS - History of user-visible changes.		-*- outline -*-
Copyright (C) 1992, 1993, 1994, 1998, 2000, 2001, 2006, 2007, 2008 Free
Software Foundation, Inc.

* Noteworthy changes in Version 1.9b (200x-??-??) [beta]
  Released by ????, based on git version 1.9a-*

NOTE - there are still a number of FIXMEs to resolve before this can be
promoted to 2.0.

** Building M4

*** The build environment has been updated to modern GNU practices,
    depending on newer features of Autoconf, Automake, Libtool, Gettext,
    and Gnulib to be more portable to a wide variety of platforms.

** New command line behavior

*** If the POSIXLY_CORRECT environment variable is set, it implies the
    `-G' and `-Q' options, effectively giving a more fully POSIX-compliant
    implementation with only compatible GNU extensions.

*** New `-b'/`--batch' command-line option to force non-interactive mode.
    Also, in addition to `-e'/`--interactive' requesting interactive mode,
    m4 now follows the lead of sh, and automatically enters interactive
    mode when there are no files specified, and when both standard input
    and standard error are terminals.

*** New `-B'/`--prepend-include' command-line option allows prepending to
    the include path, rather than always searching `.' first.

*** The `-d'/`--debug' command-line option now understands `-' and `+'
     modifiers, the way `debugmode' has always done.  The option
    `--debugmode' is added as an alias for `-d'.

*** New `--debuglen' command-line option matches the spelling of a new
    macro, and the old spelling `--arglength' now issues a warning that it
    might be withdrawn in the future.

*** New `-g'/`--gnu' command-line option overrides `-G'/`--traditional',
    allowing the GNU module to be selected even when POSIXLY_CORRECT.

*** The `-H'/`--hashsize' command-line options, which were made no-ops in
    a previous beta, now issue a deprecation warning.

*** The `-L'/`--nesting-limit' command-line option now performs argument
    validation and accepts an optional multiplier suffix.

*** The `-o'/`--error-output' command-line options, which were replaced by
    `--debugfile' in M4 1.4.7, now issue a deprecation warning.  This
    warning interferes with all versions of Autoconf prior to 2.61, so plan
    on installing an updated Autoconf when installing M4 2.0.

*** New `-p'/`--pushdef' and `--popdef' command-line options allow more
    control over macro definitions from the command line between input
    files.

*** New `--posix' command-line option is a synonym for `-G'/`--traditional'.

*** New `-r'/`--regexp-syntax' command-line option changes the default
    regular expression syntax used by M4.  Without this option, M4
    continues to use EMACS style expressions.  A new section in the info
    docs explains the differences between them, and what builtins are
    affected.

*** New `--safer' command-line option cripples the potentially unsafe
    builtins `debugfile', `esyscmd', `maketemp', `mkdtemp', `mkstemp', and
    `syscmd'.

*** New `--syncoutput' command-line option matches the builtin added in a
    previous beta, and provides more control over sync line generation
    from the command line between input files.  The previous options
    `-s'/`--synclines' remain as aliases for `--syncoutput=1'.

*** New `--traceoff' command-line option, and new spelling `--traceon' for
    `--trace', allow more control over macro tracing from the command line
    between input files.

*** New `--warnings' command-line option re-enables warnings, overriding
    `-Q'/`--quiet'/`--silent', allowing warnings even when POSIXLY_CORRECT.

*** When GNU extensions are enabled, any command line arguments that wauld
    have been interpreted as input file names with previous releases are
    still searched for as before, but will first attempt to be loaded as
    compiled modules before falling back on loading as m4 input.  In
    POSIXLY_CORRECT mode, only m4 input files in the current directory can
    be loaded.

*** Any command line arguments that previously had to name input files

** POSIX conformance

*** The `defn' builtin now allows any number of arguments, as POSIX requires.
  - FIXME: This still doesn't work with concatenating builtins with text.

  - FIXME: POSIX recommends using ${10} instead of $10 for the tenth
  positional argument.  We should deprecate $10.

** Removed builtins

*** The experimental `epatsubst' and `eregexp' builtins have been removed
    in favor of a new `changeresyntax' builtin.

*** The `load' builtin, introduced in previous betas has been removed in
    lieu of richer `include' and `sinclude' functionality.

** New builtins

*** New `changeresyntax' builtin allows programmatic setting of the default
    regular expression flavor, to match `-r'/`--regexp-syntax' command-line
    option.

*** New `debuglen' builtin allows runtime setting of debug output length,
    previously controlled only by the `-l' command line argument.
    Additionally, whether using the new macro or the command line argument,
    the length limitation now affects dumpdef output as well as trace
    output, undergoes argument validation, and accepts an optional
    multiplier suffix.
  - FIXME the multiplier suffix isn't reliable yet

*** New `mkdtemp' builtin parallels `mkstemp', but allows the creation of
    temporary directories instead of files.

*** New `refcount' builtin allows tracking how many times a module has
    been loaded.
  - FIXME: consider making m4modules smarter for this purpose

*** New `renamesyms' builtin allows programmatic renaming of all symbols
    according to a regular expression.
  - FIXME: This feature can cause core dumps when renaming multiple
  symbols to the same name.

*** New `__traditional__' builtin identifies when the traditional module
    is loaded instead of the gnu module.

*** The `modules' and `symbols' builtins, introduced in previous betas,
    have been renamed `m4modules' and `m4symbols', in order to minimize
    problems when upgrading from 1.4.x and processing English text.  To
    prevent future problems, any future macro added as a GNU extension will
    either be blind (ie. be unrecognized without arguments), or begin with
    the prefix `m4' or `__'.

** Changed behavior of builtins

*** The module identifier builtins, such as `__gnu__', `__m4_version__',
    and `__unix__', now warn if given arguments.

*** The `builtin' builtin now has a special form, where if the first
    argument is exactly the special token representing defn(`builtin'), the
    expansion is the special token representing the builtin named in the
    second argument.  This allows regenerating a macro with a more
    efficient mapping directly to a builtin function, rather than through
    textual indirection through further expansions of `builtin'.

*** The `changecom' builtin semantics now match traditional
    implementations; if the start-comment string resembles a macro name or
    the start-quote string, comments are effectively disabled.

*** The `changesyntax' builtin has been improved, to make it easier to add
    and remove characters from a syntax class without having to specify the
    entire set of characters in that class.  It also supports new syntax
    categories, `$', `{' and `}', for extended argument handling in macro
    definitions.  See the manual for more examples.

*** New `m' flag to `-d'/`--debug' command-line option or `debugmode'
    builtin traces actions related to module loading and unloading, and
    affects `dumpdef' and trace output to show where builtins come from.
    New `s' flag shows the entire stack of `pushdef' definitions during
    `dumpdef'.  The `c' flag has been updated to output two lines instead
    of three (since the last two had always been paired), and to add
    information to the first line to show the definition of the macro being
    expanded.  The 'e' flag has been updated to output non-text expansions.

*** The `divert' builtin now accepts an optional second argument of text
    that is immediately placed on the new diversion, regardless of whether
    the current expansion is nested within argument collection of another
    macro.

*** The `dumpdef' builtin now always outputs to standard error, rather than
    the debug file specified by the `--debugfile' option or `debugfile'
    macro.

*** The `eval' and `mpeval' builtins now support the following new
    operators: `>>>', `\', `?:', and  `,'.

*** When GNU extensions are enabled, the `include' and `sinclude' builtins
    continue to search directories one at a time, but will first attempt to
    load arguments as compiled modules and then as m4 input before moving
    to the next directory in the search path.  In POSIXLY_CORRECT mode,
    only m4 input in the current directory can be loaded.

*** The `maketemp' builtin now always warns that it is obsolete, even in GNU
    mode where it uses the same secure algorithm as `mkstemp', because of
    the recommendation of POSIX to obsolete `maketemp' as inherently
    insecure when obeying POSIX.

*** The `m4symbols' builtin now warns if given a builtin token instead of
    a macro name.  It remains silent for undefined macros.

*** The `patsubst' and `regexp' builtins have a new optional 4th argument
    to use a different regular expression syntax for the duration of that
    invocation.

*** The semantics of the `traceon' and `traceoff' builtins now match
    traditional implementations: when called without arguments, they affect
    global state rather than affecting only the macros defined at that
    moment.  The manual includes an example of how to recover 1.4.x
    semantics.

** Other changes

*** The syntax of frozen files format V2 has been improved to save
    additional state.  This includes the `R' directive for default regular
    expression syntax.  Also, a V2 file can now be represented completely
    in ASCII, thanks to escape sequences.  Unfortunately, files frozen by
    M4 1.4q that contain \ in macros cannot be read by 1.9b, but since 1.4q
    was not widely distributed, this is not expected to be much of an
    issue, and comes with the territory of using a beta release.
  - FIXME: format 2 still needs to catch more missing state; once 2.0 is
    released, any further changes would introduce format 3.

*** Improvements made in the 1.4.x and 1.6 stable series have been
    incorporated.


* Noteworthy changes in Version 1.6 (????-??-??) [stable]
  Released by ????, based on git version 1.4.10b.x-*

** Fix regression introduced in 1.4.10b (but not present in 1.4.11) where
   using `builtin' or `indir' to perform nested `shift' calls triggered an
   assertion failure.

** Fix regression introduced in 1.4.10b (but not present in 1.4.11) where
   the command-line option -dV, as well as the builtin `debugmode(V)',
   failed to enable `t' and `c' debug options.

** Fix the `m4wrap' builtin to accumulate wrapped text in FIFO order, as
   required by POSIX.  The manual mentions a way to restore the LIFO order
   present in earlier GNU M4 versions.  NOTE: this change exposes a bug
   in Autoconf 2.59 and earlier (which was fixed in Autoconf 2.60).

   If you want your package to work with pre-installed Autoconf without
   requiring 2.60, then add these lines to your project's configure.ac,
   prior to calling AC_INIT:

     # As long as this project is not ready to upgrade to autoconf 2.60
     # or newer, make sure that newer M4 will still use LIFO order:
     m4_define([m4_wrap], [m4_ifdef([_$0_text],
       [m4_define([_$0_text], [$1]m4_defn([_$0_text]))],
       [m4_define([_$0_text], [$1])m4_builtin([m4wrap],
         [m4_default(m4_defn([_$0_text])m4_undefine([_$0_text]))])])])

   On the other hand, if you want to install Autoconf 2.59 or earlier,
   then apply this patch:
     http://git.sv.gnu.org/gitweb/?p=autoconf.git;a=commitdiff;h=56d42fa71

** The `defn' builtin now warns when operating on an undefined macro name.
   To simulate 1.4.x behavior, use:
     pushdef(`defn', `ifdef(`$1', `builtin(`defn', `$1')')')

** Enhance the `ifdef', `ifelse', and `shift' builtins, as well as all
   user macros, to transparently handle builtin tokens generated by `defn'.

** Allow the concatenation of builtin macros with arbitrary text in
   several contexts, via the `defn' builtin or argument expansion, rather
   than warning and converting the builtin token to an empty string.
   However, it is still not possible to use a concatenated builtin when
   defining a macro.

** Enhance the `defn', `dumpdef', `ifdef', `popdef', `traceon', `traceoff',
   and `undefine' macros to warn when encountering a builtin token in the
   context of a macro name, rather than acting on the empty string.  This
   was already done for `define', `pushdef', `builtin', and `indir'.

** A number of portability improvements inherited from gnulib.

* Noteworthy changes in Version 1.4.10b (2008-02-25) [beta]
  Released by Eric Blake, based on git version 1.4.10a

Note that M4 1.4.10b was released prior to 1.4.11, and includes all the
features of 1.4.11 except for C99 parsing in the `format' builtin.  It also
contains the following beta features that were deemed worth deferring until
1.6:

** Further enhance the `index' builtin to often achieve sublinear results.

** Enhance the `regexp' and `patsubst' builtins to cache frequently used
   regular expressions, which speeds up typical Autoconf usage.

** Enhance the `format' builtin to warn for more suspicious usages, such as
   missing arguments or problems parsing according to the format string.

** Enhance the `ifelse' and `shift' builtins so that tail-recursive
   algorithms based on `$@' operate in linear, rather than quadratic, time
   and memory.

** A number of portability improvements inherited from gnulib.

* Noteworthy changes in Version 1.4.11 (2008-04-02) [stable]
  Released by Eric Blake, based on git version 1.4.10a

** Security fixes for the -F option, for bugs present since -F was
   introduced in 1.3: Avoid core dump with 'm4 -F file -t undefined', and
   avoid arbitrary code execution with certain file names.

** Fix regression introduced in 1.4.9b in the `divert' builtin when more
   than 512 kibibytes are saved in diversions on platforms like NetBSD
   or darwin where fopen(name,"a+") seeks to the end of the file.

** The output of the `maketemp' and `mkstemp' builtins is now quoted if a
   file was created.  This is a minor security fix, because it was possible
   (although rather unlikely) that an unquoted string could match an
   existing macro name, such that use of the `mkstemp' output would trigger
   inadvertent macro expansion and operate on the wrong file name.

** Enhance the `defn' builtin to support concatenation of multiple text
   arguments, as required by POSIX.  However, at this time, it is not
   possible to concatenate a builtin macro with anything else; a warning is
   now issued if this is attempted, although a future version of M4 may
   lift this restriction to match other implementations.

** Enhance the `format' builtin to parse all C99 floating point numbers,
   even on platforms where strtod(3) is buggy, although the replacement
   function does have the known issue of rounding errors when parsing
   some decimal floating point values.  This fixes testsuite failures
   introduced in 1.4.9b.

** Enhance the `index' builtin to guarantee linear behavior, in spite of
   the surprisingly large number of systems with a brain-dead quadratic
   strstr(3).

** A number of portability improvements inherited from gnulib.

* Noteworthy changes in Version 1.4.10 (2007-07-09) [stable]
  Released by Eric Blake, based on CVS version 1.4.9c

** Upgrade from GPL version 2 to GPL version 3 or later.

** A number of portability improvements inherited from gnulib.

** Avoid undefined behavior introduced in 1.4.9b in the `format' builtin
   when handling %c.  However, this area of code has never been documented,
   and currently does not match the POSIX behavior of printf(1), so it may
   have further changes in the next version.

* Noteworthy changes in Version 1.4.9b (2007-05-29) [beta]
  Released by Eric Blake, based on CVS version 1.4.9a

** Fix regression introduced in 1.4.9 in the `eval' builtin when performing
   division.

** Fix regression introduced in 1.4.8 in the `-F' option that made it
   impossible to freeze more than 512 kibibytes of diverted text.

** The synclines option `-s' no longer generates sync lines in the middle of
   multiline comments or quoted strings.

** Work around a number of corner-case POSIX compliance bugs in various
   broken stdio libraries.  In particular, the `syscmd' builtin behaves
   more predictably when stdin is seekable.

** The `format' builtin now understands formats such as %a, %A, and %'hhd,
   and works around a number of platform printf bugs.  Furthermore, the
   sequence format(%*.*d,-1,-1,1) no longer outputs random data.  However,
   some non-compliant platforms such as mingw still have known bugs in
   strtod that may cause testsuite failures.

** The testsuite is improved to also run gnulib portability tests for the
   features that M4 imports from gnulib.

* Noteworthy changes in Version 1.4.9 (2007-03-23) [stable]
  Released by Eric Blake, based on CVS version 1.4.8c

** Minor documentation and portability cleanups.

* Noteworthy changes in Version 1.4.8b (2007-02-24) [beta]
  Released by Eric Blake, based on CVS version 1.4.8a

** Fix a regression introduced in 1.4.8 that made m4 unable to process
   files larger than 2GiB on some platforms.

** Fix a regression introduced in 1.4.8 that made m4 dump core when
   invoked as 'm4 -- file'.

** The `eval' builtin now follows C precedence rules.  Additionally, the
   short-circuit operators correctly short-circuit division by zero.  The
   previously undocumented alias of '=' meaning '==' in eval now triggers a
   deprecation warning, so that a future version of M4 can implement a form
   of variable assignment as an extension.

** The `include' builtin now affects exit status on failure, as required by
   POSIX.  Use `sinclude' if you need a successful exit status.

** The `-E'/`--fatal-warnings' command-line option now has two levels.  When
   specified only once, warnings affect exit status, but execution
   continues, so that you can see all warnings instead of fixing them one
   at a time.  To achieve 1.4.8 behavior, where the first warning
   immediately exits, specify -E twice on the command line.

** A new `--warn-macro-sequence' command-line option allows detection of
   sequences in `define' and `pushdef' definitions that match an optional
   regular expression.  The default regular expression is
   `\$\({[^}]*}\|[0-9][0-9]+\)', corresponding to the sequences that might
   not behave correctly when upgrading to the eventual M4 2.0.  By default,
   M4 2.0 will follow the POSIX requirement that a macro definition
   containing `$11' must expand to the first argument concatenated with 1,
   rather than the eleventh argument; and will take advantage of the POSIX
   wording that allows implementations to treat `${11}' as the eleventh
   argument instead of literal text.  Be aware that Autoconf 2.61 will not
   work with this option enabled with the default regular expression; but
   Autoconf 2.62 will be compatible with this option.

** Improved portability to platforms such as BSD/OS and AIX.

* Noteworthy changes in Version 1.4.8 (2006-11-20) [stable]
  Released by Eric Blake, based on CVS version 1.4.7a

** The `divert' macro and `-H'/`--hashsize' command line option no longer
   cause a core dump when handed extra large values.  Also, `divert' now
   uses memory proportional to the number of diversions in use, rather than
   to the maximum diversion number encountered, so that large diversion
   numbers are less likely to exhaust system memory; and is no longer
   limited by the maximum number of file descriptors.

** The `--help' and `--version' command line options now consistently
   override all earlier options.  For example, `m4 --debugfile=trace
   --help' now no longer accidentally creates an empty file `trace'.

** The `-L'/`--nesting-limit' command line option can now be set to 0
   to remove the default limit of 1024.  However, it is still possible that
   heavily nested input can cause abrupt program termination due to stack
   overflow.

** Problems encountered when writing to standard error, such as with the
   `errprint' macro, now always cause a non-zero exit status.

** Warnings and errors issued during macro expansion are now consistently
   reported at the line where the macro name was detected, rather than
   where the close parenthesis resides.  Text wrapped by `m4wrap' now
   remembers the location that was in effect when m4wrap was invoked,
   rather than changing to line 0 and the empty string for a file.  The
   macros `__line__' and `__file__' now work correctly even as the last
   token in an included file.

** The `builtin' and `indir' macros now transparently handle builtin
   tokens generated by `defn'.

** When diversions created by the `divert' macro collect enough text that
   M4 must use temporary files, the environment variable $TMPDIR is now
   consulted, and a better effort is made to clean up those files in the
   event of a fatal signal.

** The `mkstemp' builtin is added with the same GNU semantics as `maketemp',
   based on the recommendation of POSIX to deprecate the POSIX semantics of
   `maketemp' as inherently insecure.  In GNU mode (no -G supplied on the
   command line), `maketemp' silently retains the secure GNU semantics, but
   a future release of M4 will change this to emit a warning.  In
   traditional mode (m4 -G), `maketemp' now uses the POSIX-mandated
   insecure semantics, and issues a warning that you should convert your
   script to use `mkstemp' instead.  Additionally, `mkstemp' and `maketemp'
   are now well-defined even if the template argument does not end in six
   `X' characters.

** The manual has been improved, including a new section on a composite
   macro `foreach'.

** The `changecom' and `changequote' macros now treat an empty second
   argument the same as if it were missing, rather than using the empty
   string and making it impossible to end a comment or quote.

** The `translit' macro now operates in linear instead of quadratic time,
   and is now eight-bit clean.

** The `-D', `-U', `-s', and `-t' command line options now take effect
   after any files encountered earlier on the command line, rather than up
   front, as is done in traditional implementations and required by POSIX.

* Noteworthy changes in Version 1.4.7 (2006-09-25) [stable]
  Released by Eric Blake, based on CVS version 1.4.6a

** Fix regression from 1.4.5 in handling a file that ends in a macro
   expansion without arguments instead of a newline.

** The define and pushdef macros now warn when the first argument is not
   a string, rather than silently doing nothing.

** Standard input can now be read more than once, as in 'm4 - file -', and
   is not closed until all wrapped text is handled.  This makes a
   difference when stdin is not a regular file, and also fixes bugs when
   using the syscmd or esyscmd macros from wrapped text.

** When standard input is a seekable file, the m4exit, syscmd, and esyscmd
   macros now restore the current position to the next unread byte rather
   than discarding an arbitrary amount of buffered data.

** SysV command-line compatibility is no longer a goal of GNU M4; the
   focus will be instead on POSIX compatibility.  This release continues to
   support previous usage, but adds warnings in areas which will allow a
   future version of GNU M4 to use its own extensions without being tied to
   the SysV command line interface.

** The no-op compatibility command line options -B, -N, -S, -T, and
   --diversions may be withdrawn or assigned new meanings in future
   releases, so they now issue a warning if used.

** A new command line option -i replaces the compatibility -e as the
   short spelling of --interactive, for consistency with other GNU tools; a
   warning is issued if the old spelling is used, and it may be assigned
   new meaning in future releases.

** A new command line option --debugfile replaces the options -o and
   --error-output as the preferred spelling.  The old options were
   misleading in their names and inconsistent with other GNU tools; they
   are still silently accepted, but no longer documented in --help, and may
   be assigned new meanings in future releases.

* Noteworthy changes in Version 1.4.6 (2006-08-25) [stable]
  Released by Eric Blake, based on CVS version 1.4.5a

** Fix buffer overruns in regexp and patsubst macros when handed a trailing
   backslash in the replacement text, or when handling \n substitutions
   beyond the number of \(\) groups.

** Fix memory leak in regexp, patsubst, and changeword macros.

** The format macro now understands %F, %g, and %G.

** When loading frozen files, m4 now exits with status 63 if version
   mismatch is detected.

** Fix bugs that occurred when invoked with stdout or stderr closed,
   and detect write failures to stdout or to the target of the debugfile
   macro.  In particular, the syscmd and esyscmd macros can no longer
   interfere with the debug stream or diversions.

** The m4exit macro now converts values outside the range 0-255 to 1.

** It is now an error if a command-line input file ends in the middle of a
   comment, matching the behavior of mid-string and mid-argument
   collection.

** The dnl macro now warns if end of file is encountered instead of a
   newline.

** The error message when end of file is encountered now uses the file and
   line where the dangling construct started, rather than `NONE:0:'.

** The debugmode and __file__ macros, and the -s/--synclines option, now
   show what directory a file was found in when the -I/--include option or
   M4PATH variable had an effect.

** The changequote and changecom macros now work with 8-bit characters, and
   quotes and comments that begin with `(' are properly recognized
   following a word.

** The new macro __program__ is added, which allows the input file to issue
   an error message that resembles messages from m4.  Warning and error
   messages have been reformatted to comply with GNU Coding Standards.

** The errprint, m4wrap, and shift macros are now recognized only with
   arguments.

** The index, substr, translit, regexp, and patsubst macros now produce
   output when given only one argument, but still warn about a missing
   second argument.

** The patsubst macro now reliably finds zero-length matches at the end
   of a string.

* Noteworthy changes in Version 1.4.5 (2006-07-15) [stable]
  Released by Eric Blake, based on CVS version 1.4.4c

** Fix sysval on BeOS, OS/2, and other systems that store exit status
   in the low-order byte.  Additionally, on Unix platforms, if syscmd was
   terminated by a signal, sysval now displays the signal number shifted
   left by eight bits, to match traditional m4 implementations.

** The maketemp macro is no longer subject to platform limitations (such as
   26 or 32 max files from a given template).

** Frozen files now require that the first directive be V (version), to
   better diagnose version mismatch.  Additionally, if the F directive
   (builtin function) names an unknown builtin that existed in the m4 that
   froze the file but not in the current m4 (for example, changeword), the
   warning is deferred until an attempt is made to actually use the
   builtin.  This allows downgrading from beta m4-1.4o to stable m4-1.4.5
   without breaking autoconf.

** The format and indir macros are now recognized only with arguments.

** The eval macro no longer crashes on x86 architectures when dividing the
   minimum integer by -1.

** On systems with ecvt and fcvt, format no longer truncates trailing
   zeroes on integers printed with %.0f.  On systems without these
   functions, format is no longer subject to a buffer overflow that
   permitted arbitrary code execution.

** On native Windows builds, the macro __windows__ is provided instead of
   __unix__.  Likewise, on OS/2 builds, the macro __os2__ is provided.
   This allows input files to determine when syscmd might behave
   differently.

** Fix bug in 1.4.3 patch to use \n line-endings that did not work for
   cygwin.

** When given the empty string or 0, undivert is now documented as a no-op
   rather than closing stdout, warning about a non-existent file, or trying
   to read a directory as a file.

** Many documentation improvements.  Also, the manual is now distributed
   under FDL 1.2, rather than a stricter verbatim-only license.

** Raise the -L (--nesting-limit) command line option limit from 250 to
   1024.

** The decr, incr, divert, m4exit, and substr macros treat an empty number
   as 0, issue a warning, and expand as normal; rather than issuing an
   error and expanding to the empty string.

** The eval macro now treats an empty radix argument as 10, handles radix 1,
   and treats the width argument as number of digits excluding the sign,
   for compatibility with other m4 implementations.

** The ifdef, divert, m4exit, substr, and translit macros now correctly
   ignore extra arguments.

** The popdef and undefine macros now correctly accept multiple arguments.

** Although changeword is on its last leg, if enabled, it now reverts to the
   default (faster) regexp when passed the empty string.

** The regexp and substr macros now warn and ignore a trailing backslash in
   the replacement, and warn on \n for n larger than the number of
   sub-expressions in the regexp.

* Noteworthy changes in Version 1.4.4b (2006-06-17) [beta]
  Released by Eric Blake, based on CVS version 1.4.4a

** Fix a recursive push_string crashing bug, which affected changequote of
   three or more characters on some compilers.

** Use automake to fix build portability issues.

** Fix a recursive m4wrap crashing bug.

** Fix a 1 in 2**32 hash crashing bug.

** Tracing a macro by name is now persistent, even if the macro is
   subsequently undefined or redefined.  The traceon and traceoff macros no
   longer warn about undefined symbols.  This solves a crash when using
   indir on an undefined macro traced with the -t option, as well as an
   incorrect result of ifdef.  Furthermore, tracing is no longer
   transferred with builtins, solving the bug of "m4 -tm4_eval" failing to
   give trace output on the input
   "define(`m4_eval',defn(`eval'))m4_eval(1)".

** Fix a crash when a macro is undefined while collecting its arguments, by
   always using the definition that was in effect before argument
   collection.  This behavior matches the C pre-processor, and means that
   the sequence "define(`f',`1')f(define(`f',`2'))f" is now documented to
   result in "12", rather than the previously undocumented "22".

** Update the regex engine to fix several bugs.

** Fix a potential crash on machines where char is signed.

* Noteworthy changes in Version 1.4.4 (Oct 2005) [stable]
  Released by Gary V. Vaughan

** ./configure --infodir=/usr/share/info now works correctly.

** When any file named on the command line is missing exit with status 1.

* Noteworthy changes in Version 1.4.3 (Mar 2005) [stable]
  Released by Gary V. Vaughan

** DESTDIR installs now work correctly.

** Don't segfault with uncompilable regexps to changeword().

** Always use \n line-endings for frozen files (fixes a Windows bug).

** Portability fix for systems lacking mkstemp(3).

** Approximately 20% speed up in the common case of usage with autoconf.

** Supported on QNX 6.3.

* Noteworthy changes in Version 1.4.2 (Aug 2004) [stable]
  Released by Paul Eggert

** No user visible changes; portability bug fixes only.

* Noteworthy changes in Version 1.4.1 (Jun 2004) [stable]
  Released by Paul Eggert

** The 1.4.x series is intended to be stable; features added in 1.4[a-q]
   were not backported to 1.4.x unless specifically mentioned above.

** maketemp now creates an empty file with the given name, instead of merely
   returning the name of a nonexistent file.  This closes a security hole.


* Version beta 1.4q - August 2001, by Gary V. Vaughan

** Support for the experimental `changeword' has been dropped.

** `m4 --hashsize' and `-H' are still accepted, but have no effect.  M4
   will grow its internal symbol table if the symbol density is having an
   effect on performance.

** `configure --without-modules' will build an m4 binary with no preloaded
   modules.  At startup it will search for and load modules `m4' and either
   `gnu' or `traditional'.  This mode of operation can be used for
   development and debugging of the base modules without the need to
   recompile all of m4 with each modification.

** `configure --with-modules="gnu m4 traditional load"', for example,
   will build an m4 binary with the named modules preloaded, ready to be
   activated (even on static lib only machines) with the `-m' option or
   using the `load' builtin.

** M4 has no builtins or macros in core, they are all loaded from modules
   at startup.  This means that modules are no longer optional, though the
   standard build will statically link the modules `m4', `gnu' and
   `traditional', so even on machines with no ltdl support, all of the
   functionality from previous releases is available.

** New builtin `load' to dynamically load modules which can define new
   builtins and user macros.

** New builtin `unload' to remove loaded modules (and the builtins and user
   macros they define) from the running m4 interpreter.

** New builtins `eregexp' and `epatsubst' to use Extended Regular
   Expressions syntax in lieu of Basic Regular Expressions as used by
   `regexp' and `patsubst'.

** The names of all currently loaded modules are returned by the new
   builtin, ``modules''.

** Loadable modules can define new builtin functions or text expansion
   macros.

** The module code has been rewritten to use libltdl, the libtool dynamic
   loader, which means GNU m4 can now load (and unload) modules just about
   anywhere which it can be built.  This includes obscure hosts such as
   cygwin and BeOS, and also on hosts which do not have shared libraries,
   through preloading (see libtool manual) and GNU dld.

** Modules can now be built without the m4 source being available using the
   installed m4module.h header file (and some other headers that it
   includes for you), and the installed libm4.la libtool library.  All
   symbols exported from libm4.la have a prefix of `m4_' or `M4_'.  See the
   modules directory for examples of usage.

** A new V2 format for frozen files that saves module and syntax information.

* Version beta 1.4o - January 2000, by Rene' Seindal

** Modules can be loaded from the command line with --load-module

** Modules now use libtool's wrapper libltdl.

** New builtin `symbols' allows dynamic queries of all currently defined
   macros.

** Various Bug fixes.

* Version beta 1.4n - November 1998, by Rene' Seindal

** The module code has been reorganised yet again, and now compiles
   correctly on GNU/Linux, HPUX 9 and 10, SunOS 5 and Solaris 5.

** When configured --with-gmp a new builtin `mpeval' is now defined.  The
   builtin `eval' retains its normal behaviour.

** m4 --version also shows which options were used for compilation, such as:
   "GNU m4 1.4n (options: modules gmp changeword)"

** New option --import-environment defines all environment variables as
   macros.  This is done before -D and -U are handled, so the macros can be
   changed through these options.

** Error messages now always print program name before input file name as
   specified by GNU coding standards.  Reported by Akim Demaille.

** Bug fixed: "undivert(0)" could cause m4 to read standard output.  A call
   of "undivert(0)" is now silently ignored.

** Bug fixed: when compiling --with-included-gettext, <libintl.h> wasn't
   found in intl/ directory.  Reported by Andrew Bettison.

* Version beta 1.4m - November 1998, by Rene' Seindal

** Using libtool for compiling modules and for linking main app.

** Reorganised the dynamic module code to encapsulate system dependencies
   better.  The code for HPUX shl_load() still needs testing and debugging.
   A dld interface is also missing.  Any volunteers?

** The files from the GNU m4 web-site is now in examples/WWW as a more
   complete example of what GNU m4 can do.

* Version beta 1.4l - November 1998, by Rene' Seindal

** GNU m4 now has an escape syntax category.  If a character is marked as
   an escape, words are only recognised as macros if preceded by an escape
   character.  It is a bit like -P, but dynamic: it can be turned on and
   off.  The GNU m4 web-site on http://www.seindal.dk/rene/gnu/ is
   maintained with this feature - the m4 source is available on the site.

** The module interface is improved, thanks to "Brian J. Fox",
   who has contributed some code from Meta-HTML.  The modules now build
   automatically and installs properly, by default in
   /usr/local/libexec/m4.  There is a preliminary, untested support for
   shl_load().

** There is now a __m4_version__ macro that expands to the current version
   number.

* Version beta 1.4k - November 1998, by Erick Branderhorst and Rene' Seindal

** GNU m4 now uses gettext to support internationalization.

** GNU m4 now uses automake to control Makefile.in generation.  This
   should make it more consistent with the GNU standards.

** GNU m4 will use the gmp library for multiple precision integral and
   rational arithmetic in `eval' if configured with `--with-gmp'.  If
   configured without `--with-gmp' or if gmp is not available, and the type
   `long long int' is, GNU m4 will use that for `eval' arithmetic.

** GNU m4 now parses the input according to a syntax table, that can be
   modified through the new builtin `changesyntax'.  It is a generalisation
   of the existing builtins `changecom' and `changequote'.  The changes are
   completely backwards compatible (except for the existence of
   `changesyntax').

** Sync lines can be turned on and off with the `syncoutput' builtin.  The
   builtin `syncoutput' is a GNU extension.

** New experimental feature: dynamically loadable modules.  New builtin
   `loadmodules' loads shared libraries, that can define new builtin
   macros, ie, new macros can be written in C.  Depends on the dlopen()
   interface, and is currently only tested on Linux.  Enabled at configure
   time with `--with-modules'.  Documentation is in src/module.c and
   module/README.

** Implement a GNU message catalog for French (Franc,ois Pinard).

** Filenames found through path searches are now correctly reflected in
   error and debug messages and through the `__file__' macro.

** Bugs fixed:

*** All 8-bit characters can now be used for quotes.

* Version 1.4 - October 1994, by Franc,ois Pinard

** (No user visible changes)

* Version 1.3 - September 1994, by Franc,ois Pinard

** Diversions are created as needed.  Option `-N' is still accepted, but
   otherwise ignored.  Users should use only negative diversion numbers,
   instead of high positive numbers, for diverting to nowhere.

** Diversions should also work faster.  No temporary files will be needed
   at all if all diversions taken altogether do not use more than 512K.

** Frozen state files may be produced with the `--freeze-state' (-F)
   option and later brought back through the `--reload-state' (-R) option.

* Version 1.2 - July 1994, by Franc,ois Pinard

** In patsubst(STRING, REGEXP, REPLACEMENT), \& in REPLACEMENT has been
   changed to represent this part of STRING matched by the whole REGEXP,
   instead of the whole STRING as before.  \0 does the same, but emits a
   diagnostic saying it will disappear in some subsequent release.

** eval(EXPR) emits a diagnostic if EXPR has suffixed crumb.  The same for
   other numeric conversions in incr(), decr(), divert(), etc.

** `--fatal-warnings' (-E) stops execution at first warning.

** `--nesting-limit=LEVEL' (-L LEVEL) sets a limit to macro nesting.
   It is initially fixed at 250.

** `--word-regexp=REGEXP' (-W REGEXP) modifies macro name syntax, like
   does the new `changeword(REGEXP)' macro.  This feature is experimental,
   tell me your opinions about it.  You do need --enable-changeword at
   configure time to get these things.  Do *not* depend on them yet.

** Trace output format is scannable by GNU Emacs' next-error function.

** Stack overflow is detected and diagnosed on some capable systems.

** Various bugs have been corrected, m4 should be more portable.  See the
   ChangeLog for details.

* Version 1.1 - November 1993, by Franc,ois Pinard

** Changes which might affect existing GNU m4 scripts:

*** Option `-V' has been removed, use `--version' instead.  `--version'
    writes on standard output instead of standard error, and inhibits any
    script execution.

*** `--no-gnu-extensions' has been renamed `--traditional'.

*** In `eval', `^' used to indicate exponentiation, use `**' instead.

*** The automatic undiversion which takes place at end of all input is
    forced into the main output stream.

** Changes which are unlikely to affect existing scripts:

*** `--help' prints an usage summary on standard output.  Script execution
    is then inhibited.

*** `--prefix-builtins' (-P) prefixes all builtin macros by `m4_'.

*** Most builtin macros for which arguments are mandatory, called without
    any arguments, are no more recognized as builtin macros: they are
    consequently copied verbatim to the output stream.

*** `define' and `pushdef' are usable with only one argument, they give
    this argument an empty definition.

*** `eval' new operators for binary representation handling: `^' for
    exclusive-or, `~' for the bitwise negation, `<<' and `>>' for shifts.

*** `eval' recognizes the notation 0bDIGITS for binary numbers and the
    notation 0rRADIX:DIGITS for numbers in any radix from 1 to 36.

* Version 1.0.3 - December 1992, by Franc,ois Pinard

** Changes for the user:

*** `dnl' outputs a diagnostic if immediately followed by `('.  Usually,
    `dnl' is followed by newline or whitespace.

*** `ifelse' accepts without complaining the common idiom of having only
    one argument.  This is useful for introducing long comments.

*** `eval' always expresses values as signed, whatever the radix.

*** M4OPTS environment variable is no longer obeyed.

*** `--no-warnings' option is renamed `--silent'.

*** Debug lines use a new format more compatible with GNU standards.

*** Various bugs have been corrected.  See the ChangeLog for details.

** Changes for the installer:

*** GNU m4 now uses an Autoconf-generated configure script, and should be
    more easily portable in many ways.  (Cray is not supported yet).

*** `make check' has been made more portable, expect no errors.

** Changes for the programmer:

*** Sources have been fully reindented to comply with GNU standards, and
    cleaned up in many ways.

*** Sources have been protoized.  Non-ANSI compilers are automatically
    detected, then sources are unprotoized on the fly before compilation.

*** GNU m4 uses newer versions of obstack, regex, getopt, etc.

* Version 1.0 - October 1991, by Rene' Seindal

** Uses GNU configure, taken from the gdb distribution.

** Uses GNU getopt(), with long option names.

** The -Q/+quiet option is added, which suppresses warnings about missing
   or superflous arguments to builtin macros.

** Added default options via the M4OPTS environment variable.

** Several minor bugs have been fixed.

* Version 0.99 - July 1991, by Rene' Seindal

** The builtins `incr' and `decr' are now implemented without use of
   `eval'.

** The builtin `indir' is added, to allow for indirect macro calls
   (allows use of "illegal" macro names).

** The debugging and tracing facilities has been enhanced considerably.
   See the manual for details.

** The -tMACRO option is added, marks MACRO for tracing as soon as it
   is defined.

** Builtins are traced after renaming iff they were before.

** Named files can now be undiverted.

** The -Nnum option can be used to increase the number of divertions
   available.

** Calling changecom without arguments now disables all comment handling.

** A bug in `dnl' is fixed.

** A bug in the multi-character quoting code is fixed.

** Several typos in the manual has been corrected.  More probably persist.

* Version 0.75 - November 1990, by Rene' Seindal

** Implemented search path for include files (-I option and M4PATH
   environment variable).

** Implemented builtin `format' for printf-like formatting.

** Implemented builtin `regexp' for searching for regular expressions.

** Implemented builtin `patsubst' for substitution with regular
   expressions.

** Implemented builtin `esyscmd', which expands to a shell commands output.

** Implemented `__file__' and `__line__' for use in error messages.

** Implemented character ranges in `translit'.

** Implemented control over debugging output.

** Implemented multi-character quotes.

** Implemented multi-character comment delimiters.

** Changed predefined macro `gnu' to `__gnu__'.

** Changed predefined macro `unix' to `__unix__', when the -G option is
   not used.  With -G, `unix' is still defined.

** Added program name to error messages.

** Fixed two missing null bytes bugs.

* Version 0.50 - January 1990, by Rene' Seindal

* Initial beta release.

Local Variables:
fill-column: 75
End: