| 2014-12-27 Anthony Green <green@moxielofic.com |
| |
| * moxie-opc.c (moxie_form1_opc_info): sto/ldo are now encoded with |
| 16-bit immediat values instead of 32. |
| * moxie-dis.c (print_insn_moxie): Ditto. |
| |
| 2014-12-24 Anthony Green <green@moxielogic.com> |
| |
| * moxie-opc: Define mul.x and umul.x instructions. Remove |
| trailing .l from add, sub, mul, div and udiv instructions. |
| |
| 2014-12-16 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * mips-opc.c (mips_builtin_opcodes): Add JALRC alias for |
| JIALC. Remove the operand from NAL. |
| |
| 2014-12-12 Anthony Green <green@moxielogic.com> |
| |
| * moxie-opc.c: Define zex instructions. |
| |
| 2014-12-06 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * configure.ac: Add Visium support. |
| * configure: Regenerate. |
| * Makefile.am (TARGET_LIBOPCODES_CFILES): Add visium-dis.c and |
| visium-opc.c. |
| * Makefile.in: Regenerate. |
| * disassemble.c (ARCH_visium): Define if ARCH_all. |
| (disassembler): Deal with bfd_arch_visium if ARCH_visium. |
| * visium-dis.c: New file. |
| * visium-opc.c: Likewise. |
| * po/POTFILES.in: Regenerate. |
| |
| 2014-11-30 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Make mftb* generate mfspr for |
| power4 and later. |
| |
| 2014-11-28 Sandra Loosemore <sandra@codesourcery.com> |
| |
| * nios2-opc.c (nios2_r1_opcodes): Remove deleted attributes |
| from descriptors. |
| |
| 2014-11-28 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (powerpc_opcodes <mftb>): Don't deprecate for power7. |
| (TB): Delete. |
| (insert_tbr, extract_tbr): Validate tbr number. |
| |
| 2014-11-24 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * configure: Regenerated. |
| |
| 2014-11-17 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * i386-dis-evex.c (evex_table): Add vpermi2b, vpermt2b, vpermb, |
| vpmultishiftqb. |
| * i386-dis.c (PREFIX enum): Add PREFIX_EVEX_0F3883, EVEX_W_0F3883_P_2. |
| * i386-gen.c (cpu_flag_init): Add CPU_AVX512VBMI_FLAGS. |
| (cpu_flags): Add CpuAVX512VBMI. |
| * i386-opc.h (enum): Add CpuAVX512VBMI. |
| (i386_cpu_flags): Add cpuavx512vbmi. |
| * i386-opc.tbl: Add vpmadd52luq, vpmultishiftqb, vpermb, vpermi2b, |
| vpermt2b. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2014-11-17 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * i386-dis-evex.c (evex_table): Add vpmadd52luq, vpmadd52huq. |
| * i386-dis.c (PREFIX enum): Add PREFIX_EVEX_0F38B4, |
| PREFIX_EVEX_0F38B5. |
| * i386-gen.c (cpu_flag_init): Add CPU_AVX512IFMA_FLAGS. |
| (cpu_flags): Add CpuAVX512IFMA. |
| * i386-opc.h (enum): Add CpuAVX512IFMA. |
| (i386_cpu_flags): Add cpuavx512ifma. |
| * i386-opc.tbl: Add vpmadd52huq, vpmadd52luq. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2014-11-17 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * i386-dis.c (PREFIX enum): Add PREFIX_RM_0_0FAE_REG_7. |
| (prefix_table): Add pcommit. |
| * i386-gen.c (cpu_flag_init): Add CPU_PCOMMIT_FLAGS. |
| (cpu_flags): Add CpuPCOMMIT. |
| * i386-opc.h (enum): Add CpuPCOMMIT. |
| (i386_cpu_flags): Add cpupcommit. |
| * i386-opc.tbl: Add pcommit. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2014-11-17 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * i386-dis.c (PREFIX enum): Add PREFIX_0FAE_REG_6. |
| (prefix_table): Add clwb. |
| * i386-gen.c (cpu_flag_init): Add CPU_CLWB_FLAGS. |
| (cpu_flags): Add CpuCLWB. |
| * i386-opc.h (enum): Add CpuCLWB. |
| (i386_cpu_flags): Add cpuclwb. |
| * i386-opc.tbl: Add clwb. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2014-11-06 Sandra Loosemore <sandra@codesourcery.com> |
| |
| * nios2-dis.c (nios2_find_opcode_hash): Add mach parameter. |
| (nios2_disassemble): Adjust call to nios2_find_opcode_hash. |
| |
| 2014-11-03 Nick Clifton <nickc@redhat.com> |
| |
| * po/fi.po: Updated Finnish translation. |
| |
| 2014-10-31 Andrew Pinski <apinski@cavium.com> |
| Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> |
| |
| * mips-dis.c (mips_arch_choices): Add octeon3. |
| * mips-opc.c (IOCT): Include INSN_OCTEON3. |
| (IOCT2): Likewise. |
| (IOCT3): New define. |
| (IVIRT): New define. |
| (mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0, |
| tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti |
| IVIRT instructions. |
| Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another |
| operand for IOCT3. |
| |
| 2014-10-29 Nick Clifton <nickc@redhat.com> |
| |
| * po/de.po: Updated German translation. |
| |
| 2014-10-23 Sandra Loosemore <sandra@codesourcery.com> |
| |
| * nios2-opc.c (nios2_builtin_regs): Add regtype field initializers. |
| (nios2_builtin_opcodes): Rename to nios2_r1_opcodes. Use new |
| MATCH_R1_<insn> and MASK_R1_<insn> macros in initializers. Add |
| size and format initializers. Merge 'b' arguments into 'j'. |
| (NIOS2_NUM_OPCODES): Adjust definition. |
| (bfd_nios2_num_builtin_opcodes): Rename to nios2_num_r1_opcodes. |
| (nios2_opcodes): Adjust. |
| (bfd_nios2_num_opcodes): Rename to nios2_num_opcodes. |
| * nios2-dis.c (INSNLEN): Update comment. |
| (nios2_hash_init, nios2_hash): Delete. |
| (OPCODE_HASH_SIZE): New. |
| (nios2_r1_extract_opcode): New. |
| (nios2_disassembler_state): New. |
| (nios2_r1_disassembler_state): New. |
| (nios2_init_opcode_hash): Add state parameter. Adjust to use it. |
| (nios2_find_opcode_hash): Use state object. |
| (bad_opcode): New. |
| (nios2_print_insn_arg): Add op parameter. Use it to access |
| format. Remove 'b' case. |
| (nios2_disassemble): Remove special case for nop. Remove |
| hard-coded instruction size. |
| |
| 2014-10-21 Jan Beulich <jbeulich@suse.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Enable msgclr and msgsnd on Power8. |
| |
| 2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * sparc-opc.c (sparc-opcodes): Fix several misplaced hwcap |
| entries. |
| Annotate several instructions with the HWCAP2_VIS3B hwcap. |
| |
| 2014-10-15 Tristan Gingold <gingold@adacore.com> |
| |
| * configure: Regenerate. |
| |
| 2014-10-09 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * sparc-opc.c (sparc-opcodes): Remove instructions `chkpt', |
| `commit', `random', `wr r,r,%cps', `wr r,i,%cps' and `rd %cps,r'. |
| Annotate table with HWCAP2 bits. |
| Add instructions xmontmul, xmontsqr, xmpmul. |
| (sparc-opcodes): Add the `mwait', `wr r,r,%mwait', `wr |
| r,i,%mwait' and `rd %mwait,r' instructions. |
| Add rd/wr instructions for accessing the %mcdper ancillary state |
| register. |
| (sparc-opcodes): Add sparc5/vis4.0 instructions: |
| subxc, subxccc, fpadd8, fpadds8, fpaddus8, fpaddus16, fpcmple8, |
| fpcmpgt8, fpcmpule16, fpcmpugt16, fpcmpule32, fpcmpugt32, fpmax8, |
| fpmax16, fpmax32, fpmaxu8, fpmaxu16, fpmaxu32, fpmin8, fpmin16, |
| fpmin32, fpminu8, fpminu16, fpminu32, fpsub8, fpsubs8, fpsubus8, |
| fpsubus16, and faligndatai. |
| * sparc-dis.c (v9a_asr_reg_names): Add the %mwait (%asr28) |
| ancillary state register to the table. |
| (print_insn_sparc): Handle the %mcdper ancillary state register. |
| (print_insn_sparc): Handle new operand type '}'. |
| |
| 2014-09-22 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (MOD_0F20): Removed. |
| (MOD_0F21): Likewise. |
| (MOD_0F22): Likewise. |
| (MOD_0F23): Likewise. |
| (dis386_twobyte): Replace MOD_0F20, MOD_0F21, MOD_0F22 and |
| MOD_0F23 with "movZ". |
| (mod_table): Remove MOD_0F20, MOD_0F21, MOD_0F22 and MOD_0F23. |
| (OP_R): Check mod/rm byte and call OP_E_register. |
| |
| 2014-09-16 Kuan-Lin Chen <kuanlinchentw@gmail.com> |
| |
| * nds32-asm.c (nds32_opcodes, operand_fields, keyword_im5_i, |
| keyword_im5_m, keyword_accumulator, keyword_aridx, keyword_aridx2, |
| keyword_aridxi): Add audio ISA extension. |
| (keyword_gpr, keyword_usr, keyword_sr, keyword_cp, keyword_cpr, |
| keyword_fsr, keyword_fdr, keyword_abdim, keyword_abm, keyword_dpref_st, |
| keyword_cctl_lv, keyword_standby_st, keyword_msync_st): Adjust scrope |
| for nds32-dis.c using. |
| (build_opcode_syntax): Remove dead code. |
| (parse_re, parse_a30b20, parse_rt21, parse_rte_start, parse_rte_end, |
| parse_rte69_start, parse_rte69_end, parse_im5_ip, parse_im5_mr, |
| parse_im6_ip, parse_im6_iq, parse_im6_mr, parse_im6_ms): Add audio ISA |
| operand parser. |
| * nds32-asm.h: Declare. |
| * nds32-dis.c: Use array nds32_opcodes to disassemble instead of |
| decoding by switch. |
| |
| 2014-09-15 Andrew Bennett <andrew.bennett@imgtec.com> |
| Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * mips-dis.c (mips_arch_choices): Add entries for mips32r6 and |
| mips64r6. |
| (parse_mips_dis_option): Allow MSA and virtualization support for |
| mips64r6. |
| (mips_print_arg_state): Add fields dest_regno and seen_dest. |
| (mips_seen_register): New function. |
| (print_insn_arg): Refactored code to use mips_seen_register |
| function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and |
| OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out |
| the register rather than aborting. |
| (print_insn_args): Add length argument. Add code to correctly |
| calculate the instruction address for pc relative instructions. |
| (validate_insn_args): New static function. |
| (print_insn_mips): Prevent jalx disassembling for r6. Use |
| validate_insn_args. |
| (print_insn_micromips): Use validate_insn_args. |
| all the arguments are valid. |
| * mips-formats.h (PREV_CHECK): New define. |
| * mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s, |
| -t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +; |
| (RD_pc): New define. |
| (FS): New define. |
| (I37): New define. |
| (I69): New define. |
| (mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded |
| MIPS R6 instructions from MIPS R2 instructions. |
| |
| 2014-09-10 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (dis386): Replace "P" with "%LP" for iret and sysret. |
| (putop): Handle "%LP". |
| |
| 2014-09-03 Jiong Wang <jiong.wang@arm.com> |
| |
| * aarch64-tbl.h (aarch64_opcode_table): Update encoding for mrs/msr. |
| * aarch64-dis-2.c: Update auto-generated file. |
| |
| 2014-09-03 Jiong Wang <jiong.wang@arm.com> |
| |
| * aarch64-tbl.h (QL_R4NIL): New qualifiers. |
| (aarch64_feature_lse): New feature added. |
| (LSE): New Added. |
| (aarch64_opcode_table): New LSE instructions added. Improve |
| descriptions for ldarb/ldarh/ldar. |
| (aarch64_opcode_table): Describe PAIRREG. |
| * aarch64-opc.h (aarch64_field_kind): Add FLD_lse_sz. |
| * aarch64-opc.c (fields): Add entry for F_LSE_SZ. |
| (aarch64_print_operand): Recognize PAIRREG. |
| (operand_general_constraint_met_p): Check reg pair constraints for CASP |
| instructions. |
| * aarch64-dis.c (aarch64_ext_regno_pair): New extractor for paired reg. |
| (do_special_decoding): Recognize F_LSE_SZ. |
| * aarch64-asm.c (do_special_encoding): Recognize F_LSE_SZ. |
| |
| 2014-08-26 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * micromips-opc.c (decode_micromips_operand): Rename `B' to `+J'. |
| (micromips_opcodes): Use "+J" in place of "B" for "hypcall", |
| "sdbbp", "syscall" and "wait". |
| |
| 2014-08-21 Nathan Sidwell <nathan@codesourcery.com> |
| Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * arm-dis.c (print_arm_address): Negate the GPR-relative offset |
| returned if the U bit is set. |
| |
| 2014-08-21 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * micromips-opc.c (micromips_opcodes): Remove #ifdef-ed out |
| 48-bit "li" encoding. |
| |
| 2014-08-19 Andreas Arnez <arnez@linux.vnet.ibm.com> |
| |
| * s390-dis.c (s390_insn_length, s390_insn_matches_opcode) |
| (s390_print_insn_with_opcode, opcode_mask_more_specific): New |
| static functions, code was moved from... |
| (print_insn_s390): ...here. |
| (s390_extract_operand): Adjust comment. Change type of first |
| parameter from 'unsigned char *' to 'const bfd_byte *'. |
| (union operand_value): New. |
| (s390_extract_operand): Change return type to union operand_value. |
| Also avoid integer overflow in sign-extension. |
| (s390_print_insn_with_opcode): Adjust to changed return value from |
| s390_extract_operand(). Change "%i" printf format to "%u" for |
| unsigned values. |
| (init_disasm): Simplify initialization of opc_index[]. This also |
| fixes an access after the last element of s390_opcodes[]. |
| (print_insn_s390): Simplify the opcode search loop. |
| Check architecture mask against all searched opcodes, not just the |
| first matching one. |
| (s390_print_insn_with_opcode): Drop function pointer dereferences |
| without effect. |
| (print_insn_s390): Likewise. |
| (s390_insn_length): Simplify formula for return value. |
| (s390_print_insn_with_opcode): Avoid special handling for the |
| separator before the first operand. Use new local variable |
| 'flags' in place of 'operand->flags'. |
| |
| 2014-08-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (struct private): Change int's to bfd_boolean's. |
| (decode_LOGI2op_0, decode_COMPI2opD_0, decode_COMPI2opP_0, |
| decode_dagMODik_0, decode_LDIMMhalf_0, decode_linkage_0): |
| Change assignment of 1 to priv->comment to TRUE. |
| (print_insn_bfin): Change legal to a bfd_boolean. Change |
| assignment of 0/1 with priv comment and parallel and legal |
| to FALSE/TRUE. |
| |
| 2014-08-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (OUT): Define. |
| (decode_CC2stat_0): Declare new op_names array. |
| Replace multiple if statements with a single one. |
| |
| 2014-08-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (struct private): Add iw0. |
| (_print_insn_bfin): Assign iw0 to priv.iw0. |
| (print_insn_bfin): Drop ifetch and use priv.iw0. |
| |
| 2014-08-13 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (comment, parallel): Move from global scope ... |
| (struct private): ... to this new struct. |
| (decode_ProgCtrl_0, decode_CaCTRL_0, decode_PushPopReg_0, |
| decode_PushPopMultiple_0, decode_ccMV_0, decode_CCflag_0, |
| decode_CC2dreg_0, decode_CC2stat_0, decode_BRCC_0, decode_UJUMP_0, |
| decode_LOGI2op_0, decode_COMPI2opD_0, decode_COMPI2opP_0, |
| decode_dagMODik_0, decode_LoopSetup_0, decode_LDIMMhalf_0, |
| decode_CALLa_0, decode_linkage_0, decode_pseudoDEBUG_0, |
| decode_pseudoOChar_0, decode_pseudodbg_assert_0, _print_insn_bfin, |
| print_insn_bfin): Declare private struct. Use priv's comment and |
| parallel members. |
| |
| 2014-08-13 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (ifetch): Do not align pc to 2 bytes. |
| (_print_insn_bfin): Add check for unaligned pc. |
| |
| 2014-08-13 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (ifetch): New function. |
| (_print_insn_bfin, print_insn_bfin): Call new ifetch and return |
| -1 when it errors. |
| |
| 2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * micromips-opc.c (COD): Rename throughout to... |
| (CM): New define, update to use INSN_COPROC_MOVE. |
| (LCD): Rename throughout to... |
| (LC): New define, update to use INSN_LOAD_COPROC. |
| * mips-opc.c: Likewise. |
| |
| 2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * micromips-opc.c (COD, LCD) New macros. |
| (cfc1, ctc1): Remove FP_S attribute. |
| (dmfc1, mfc1, mfhc1): Add LCD attribute. |
| (dmtc1, mtc1, mthc1): Add COD attribute. |
| * mips-opc.c (cfc1, cftc1, ctc, cttc1): Remove FP_S attribute. |
| |
| 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com> |
| Alexander Ivchenko <alexander.ivchenko@intel.com> |
| Maxim Kuznetsov <maxim.kuznetsov@intel.com> |
| Sergey Lega <sergey.s.lega@intel.com> |
| Anna Tikhonova <anna.tikhonova@intel.com> |
| Ilya Tocar <ilya.tocar@intel.com> |
| Andrey Turetskiy <andrey.turetskiy@intel.com> |
| Ilya Verbin <ilya.verbin@intel.com> |
| Kirill Yukhin <kirill.yukhin@intel.com> |
| Michael Zolotukhin <michael.v.zolotukhin@intel.com> |
| |
| * i386-dis-evex.h: Updated. |
| * i386-dis.c (PREFIX enum): Add PREFIX_EVEX_0F54, PREFIX_EVEX_0F55, |
| PREFIX_EVEX_0F56, PREFIX_EVEX_0F57, PREFIX_EVEX_0F3A16, |
| PREFIX_EVEX_0F3A22, PREFIX_EVEX_0F3A50, PREFIX_EVEX_0F3A51, |
| PREFIX_EVEX_0F3A56, PREFIX_EVEX_0F3A57, PREFIX_EVEX_0F3A66, |
| PREFIX_EVEX_0F3A67. |
| (VEX_LEN enum): Add VEX_LEN_0F92_P_2, VEX_LEN_0F93_P_2, |
| VEX_W_0F92_P_2_LEN_0, VEX_W_0F93_P_2_LEN_0. |
| (VEX_W enum): Add EVEX_W_0F54_P_0, EVEX_W_0F54_P_2, EVEX_W_0F55_P_0, |
| EVEX_W_0F55_P_2, EVEX_W_0F56_P_0, EVEX_W_0F56_P_2, EVEX_W_0F57_P_0, |
| EVEX_W_0F57_P_2, EVEX_W_0F78_P_2, EVEX_W_0F79_P_2, EVEX_W_0F7A_P_2, |
| EVEX_W_0F7B_P_2, EVEX_W_0F3838_P_1, EVEX_W_0F3839_P_1, |
| EVEX_W_0F3A16_P_2, EVEX_W_0F3A22_P_2, EVEX_W_0F3A50_P_2, |
| EVEX_W_0F3A51_P_2, EVEX_W_0F3A56_P_2, EVEX_W_0F3A57_P_2, |
| EVEX_W_0F3A66_P_2, EVEX_W_0F3A67_P_2. |
| (prefix_table): Add entries for new instructions. |
| (vex_len_table): Ditto. |
| (vex_w_table): Ditto. |
| (OP_E_memory): Update xmmq_mode handling. |
| * i386-gen.c (cpu_flag_init): Add CPU_AVX512DQ_FLAGS. |
| (cpu_flags): Add CpuAVX512DQ. |
| * i386-init.h: Regenerared. |
| * i386-opc.h (CpuAVX512DQ): New. |
| (i386_cpu_flags): Add cpuavx512dq. |
| * i386-opc.tbl: Add AVX512DQ instructions. |
| * i386-tbl.h: Regenerate. |
| |
| 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com> |
| Alexander Ivchenko <alexander.ivchenko@intel.com> |
| Maxim Kuznetsov <maxim.kuznetsov@intel.com> |
| Sergey Lega <sergey.s.lega@intel.com> |
| Anna Tikhonova <anna.tikhonova@intel.com> |
| Ilya Tocar <ilya.tocar@intel.com> |
| Andrey Turetskiy <andrey.turetskiy@intel.com> |
| Ilya Verbin <ilya.verbin@intel.com> |
| Kirill Yukhin <kirill.yukhin@intel.com> |
| Michael Zolotukhin <michael.v.zolotukhin@intel.com> |
| |
| * i386-dis-evex.h: Add new instructions (prefixes bellow). |
| * i386-dis.c (fetch_data): Add EdqwS, Edb, Edw, MaskBDE. |
| (enum): Add dqw_swap_mode, db_mode, dw_mode, mask_bd_mode, REG_EVEX_0F71. |
| (PREFIX enum): Add PREFIX_VEX_0F4A, PREFIX_VEX_0F99, PREFIX_VEX_0F3A31, |
| PREFIX_VEX_0F3A33, PREFIX_EVEX_0F60, PREFIX_EVEX_0F61, PREFIX_EVEX_0F63, |
| PREFIX_EVEX_0F64, PREFIX_EVEX_0F65, PREFIX_EVEX_0F67, PREFIX_EVEX_0F68, |
| PREFIX_EVEX_0F69, PREFIX_EVEX_0F6B, PREFIX_EVEX_0F71_REG_2, PREFIX_EVEX_0F71_REG_4, |
| PREFIX_EVEX_0F71_REG_6, PREFIX_EVEX_0F73_REG_3, PREFIX_EVEX_0F73_REG_7, |
| PREFIX_EVEX_0F74, PREFIX_EVEX_0F75, PREFIX_EVEX_0FC4, PREFIX_EVEX_0FC5, |
| PREFIX_EVEX_0FD1, PREFIX_EVEX_0FD5, PREFIX_EVEX_0FD8, PREFIX_EVEX_0FD9, |
| PREFIX_EVEX_0FDA, PREFIX_EVEX_0FDC, PREFIX_EVEX_0FDD, PREFIX_EVEX_0FDE, |
| PREFIX_EVEX_0FE0, PREFIX_EVEX_0FE1, PREFIX_EVEX_0FE3, PREFIX_EVEX_0FE4, |
| PREFIX_EVEX_0FE5, PREFIX_EVEX_0FE8, PREFIX_EVEX_0FE9, PREFIX_EVEX_0FEA, |
| PREFIX_EVEX_0FEC, PREFIX_EVEX_0FED, PREFIX_EVEX_0FEE, PREFIX_EVEX_0FF1, |
| PREFIX_EVEX_0FF5, PREFIX_EVEX_0FF6, PREFIX_EVEX_0FF8, PREFIX_EVEX_0FF9, |
| PREFIX_EVEX_0FFC, PREFIX_EVEX_0FFD, PREFIX_EVEX_0F3800, PREFIX_EVEX_0F3804, |
| PREFIX_EVEX_0F380B, PREFIX_EVEX_0F3810, PREFIX_EVEX_0F381C, PREFIX_EVEX_0F381D, |
| PREFIX_EVEX_0F3820, PREFIX_EVEX_0F3826, PREFIX_EVEX_0F382B, PREFIX_EVEX_0F3830, |
| PREFIX_EVEX_0F3838, PREFIX_EVEX_0F383C, PREFIX_EVEX_0F383E, PREFIX_EVEX_0F3866, |
| PREFIX_EVEX_0F3875, PREFIX_EVEX_0F3878, PREFIX_EVEX_0F3879, PREFIX_EVEX_0F387A, |
| PREFIX_EVEX_0F387B, PREFIX_EVEX_0F387D, PREFIX_EVEX_0F388D, PREFIX_EVEX_0F3A0F, |
| PREFIX_EVEX_0F3A14, PREFIX_EVEX_0F3A15, PREFIX_EVEX_0F3A20, PREFIX_EVEX_0F3A3E, |
| PREFIX_EVEX_0F3A3F, PREFIX_EVEX_0F3A42. |
| (VEX_LEN enum): Add VEX_LEN_0F41_P_2, VEX_LEN_0F42_P_2, VEX_LEN_0F44_P_2, |
| VEX_LEN_0F45_P_2, VEX_LEN_0F46_P_2, VEX_LEN_0F47_P_2, VEX_LEN_0F4A_P_0, |
| VEX_LEN_0F4A_P_2, VEX_LEN_0F4B_P_0, VEX_LEN_0F90_P_2, VEX_LEN_0F91_P_2, |
| VEX_LEN_0F92_P_3, VEX_LEN_0F93_P_3, VEX_LEN_0F98_P_2, VEX_LEN_0F99_P_0, |
| VEX_LEN_0F99_P_2, VEX_LEN_0F3A31_P_2, VEX_LEN_0F3A33_P_2, VEX_W_0F41_P_2_LEN_1, |
| VEX_W_0F42_P_2_LEN_1, VEX_W_0F44_P_2_LEN_0, VEX_W_0F45_P_2_LEN_1, |
| VEX_W_0F46_P_2_LEN_1, VEX_W_0F47_P_2_LEN_1, VEX_W_0F4A_P_0_LEN_1, |
| VEX_W_0F4A_P_2_LEN_1, VEX_W_0F4B_P_0_LEN_1, VEX_W_0F90_P_2_LEN_0, |
| VEX_W_0F91_P_2_LEN_0, VEX_W_0F92_P_3_LEN_0, VEX_W_0F93_P_3_LEN_0, |
| VEX_W_0F98_P_2_LEN_0, VEX_W_0F99_P_0_LEN_0, VEX_W_0F99_P_2_LEN_0, |
| VEX_W_0F3A31_P_2_LEN_0, VEX_W_0F3A33_P_2_LEN_0. |
| (VEX_W enum): Add EVEX_W_0F6B_P_2, EVEX_W_0F6F_P_3, EVEX_W_0F7F_P_3, |
| EVEX_W_0F3810_P_1, EVEX_W_0F3810_P_2, EVEX_W_0F3811_P_2, EVEX_W_0F3812_P_2, |
| EVEX_W_0F3820_P_1, EVEX_W_0F3826_P_1, EVEX_W_0F3826_P_2, EVEX_W_0F3828_P_1, |
| EVEX_W_0F3829_P_1, EVEX_W_0F382B_P_2, EVEX_W_0F3830_P_1, EVEX_W_0F3866_P_2, |
| EVEX_W_0F3875_P_2, EVEX_W_0F3878_P_2, EVEX_W_0F3879_P_2, EVEX_W_0F387A_P_2, |
| EVEX_W_0F387B_P_2, EVEX_W_0F387D_P_2, EVEX_W_0F388D_P_2, EVEX_W_0F3A3E_P_2, |
| EVEX_W_0F3A3F_P_2, EVEX_W_0F3A42_P_2. |
| (prefix_table): Add entries for new instructions. |
| (vex_table) : Ditto. |
| (vex_len_table): Ditto. |
| (vex_w_table): Ditto. |
| (intel_operand_size): Add db_mode, dw_mode, dqw_swap_mode, |
| mask_bd_mode handling. |
| (OP_E_register): Add dqw_swap_mode, dw_mode, db_mode, mask_bd_mode |
| handling. |
| (OP_E_memory): Add dqw_mode, dw_mode, dqw_swap_mode, dqb_mode, db_mode |
| handling. |
| (OP_G): Add db_mode, dw_mode, dqw_swap_mode, mask_bd_mode handling. |
| (OP_EX): Add dqw_swap_mode handling. |
| (OP_VEX): Add mask_bd_mode handling. |
| (OP_Mask): Add mask_bd_mode handling. |
| * i386-gen.c (cpu_flag_init): Add CPU_AVX512BW_FLAGS. |
| (cpu_flags): Add CpuAVX512BW. |
| * i386-init.h: Regenerated. |
| * i386-opc.h (CpuAVX512BW): New. |
| (i386_cpu_flags): Add cpuavx512bw. |
| * i386-opc.tbl: Add AVX512BW instructions. |
| * i386-tbl.h: Regenerate. |
| |
| 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com> |
| Alexander Ivchenko <alexander.ivchenko@intel.com> |
| Maxim Kuznetsov <maxim.kuznetsov@intel.com> |
| Sergey Lega <sergey.s.lega@intel.com> |
| Anna Tikhonova <anna.tikhonova@intel.com> |
| Ilya Tocar <ilya.tocar@intel.com> |
| Andrey Turetskiy <andrey.turetskiy@intel.com> |
| Ilya Verbin <ilya.verbin@intel.com> |
| Kirill Yukhin <kirill.yukhin@intel.com> |
| Michael Zolotukhin <michael.v.zolotukhin@intel.com> |
| |
| * i386-opc.tbl: Add AVX512VL and AVX512CD instructions. |
| * i386-tbl.h: Regenerate. |
| |
| 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com> |
| Alexander Ivchenko <alexander.ivchenko@intel.com> |
| Maxim Kuznetsov <maxim.kuznetsov@intel.com> |
| Sergey Lega <sergey.s.lega@intel.com> |
| Anna Tikhonova <anna.tikhonova@intel.com> |
| Ilya Tocar <ilya.tocar@intel.com> |
| Andrey Turetskiy <andrey.turetskiy@intel.com> |
| Ilya Verbin <ilya.verbin@intel.com> |
| Kirill Yukhin <kirill.yukhin@intel.com> |
| Michael Zolotukhin <michael.v.zolotukhin@intel.com> |
| |
| * i386-dis.c (intel_operand_size): Support 128/256 length in |
| vex_vsib_q_w_dq_mode. |
| (OP_E_memory): Add ymmq_mode handling, handle new broadcast. |
| * i386-gen.c (cpu_flag_init): Add CPU_AVX512VL_FLAGS. |
| (cpu_flags): Add CpuAVX512VL. |
| * i386-init.h: Regenerated. |
| * i386-opc.h (CpuAVX512VL): New. |
| (i386_cpu_flags): Add cpuavx512vl. |
| (BROADCAST_1TO4, BROADCAST_1TO2): Define. |
| * i386-opc.tbl: Add AVX512VL instructions. |
| * i386-tbl.h: Regenerate. |
| |
| 2014-07-20 Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
| |
| * or1k-desc.c, * or1k-desc.h, * or1k-opc.c, * or1k-opc.h, |
| * or1k-opinst.c: Regenerate. |
| |
| 2014-07-08 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * i386-dis-evex.h (EVEX_W_0F10_P_1_M_1): Fix vmovss. |
| (EVEX_W_0F10_P_3_M_1): Fix vmovsd. |
| |
| 2014-07-04 Alan Modra <amodra@gmail.com> |
| |
| * configure.ac: Rename from configure.in. |
| * Makefile.in: Regenerate. |
| * config.in: Regenerate. |
| |
| 2014-07-04 Alan Modra <amodra@gmail.com> |
| |
| * configure.in: Include bfd/version.m4. |
| (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. |
| (BFD_VERSION): Delete. |
| * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. |
| * configure: Regenerate. |
| * Makefile.in: Regenerate. |
| |
| 2014-07-01 Barney Stratford <barney_stratford@fastmail.fm> |
| Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com> |
| Pitchumani Sivanupandi <pitchumani.s@atmel.com> |
| Soundararajan <Sounderarajan.D@atmel.com> |
| |
| * avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts. |
| (print_insn_avr): Do not select opcode if insn ISA is avrtiny and |
| machine is not avrtiny. |
| |
| 2014-06-26 Philippe De Muyter <phdm@macqel.be> |
| |
| * or1k-desc.h (spr_field_masks): Add U suffix to the end of long |
| constants. |
| |
| 2014-06-12 Alan Modra <amodra@gmail.com> |
| |
| * or1k-asm.c, * or1k-desc.c, * or1k-desc.h, * or1k-dis.c, |
| * or1k-ibld.c, * or1k-opc.c, * or1k-opc.h, * or1k-opinst.c: Regenerate. |
| |
| 2014-06-10 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (fwait_prefix): New. |
| (ckprefix): Set fwait_prefix. |
| (print_insn): Properly print prefixes before fwait. |
| |
| 2014-06-07 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (UISIGNOPT): Define and use with cmpli. |
| |
| 2014-06-05 Joel Brobecker <brobecker@adacore.com> |
| |
| * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on |
| bfd's development.sh. |
| * Makefile.in, configure: Regenerate. |
| |
| 2014-06-03 Nick Clifton <nickc@redhat.com> |
| |
| * msp430-dis.c (msp430_doubleoperand): Use extension_word to |
| decide when extended addressing is being used. |
| |
| 2014-06-02 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * sparc-opc.c (cas): Disable for LEON. |
| (casl): Likewise. |
| |
| 2014-05-20 Alan Modra <amodra@gmail.com> |
| |
| * m68k-dis.c: Don't include setjmp.h. |
| |
| 2014-05-09 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (ADDR16_PREFIX): Removed. |
| (ADDR32_PREFIX): Likewise. |
| (DATA16_PREFIX): Likewise. |
| (DATA32_PREFIX): Likewise. |
| (prefix_name): Updated. |
| (print_insn): Simplify data and address size prefixes processing. |
| |
| 2014-05-08 Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
| |
| * or1k-desc.c: Regenerated. |
| * or1k-desc.h: Likewise. |
| * or1k-opc.c: Likewise. |
| * or1k-opc.h: Likewise. |
| * or1k-opinst.c: Likewise. |
| |
| 2014-05-07 Andrew Bennett <andrew.bennett@imgtec.com> |
| |
| * mips-opc.c (mips_builtin_opcodes): Add MIPS32r5 eretnc instruction. |
| (I34): New define. |
| (I36): New define. |
| (I66): New define. |
| (I68): New define. |
| * mips-dis.c (mips_arch_choices): Add mips32r3, mips32r5, mips64r3 and |
| mips64r5. |
| (parse_mips_dis_option): Update MSA and virtualization support to |
| allow mips64r3 and mips64r5. |
| |
| 2014-05-07 Andrew Bennett <andrew.bennett@imgtec.com> |
| |
| * mips-opc.c (G3): Remove I4. |
| |
| 2014-05-05 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/16893 |
| * i386-dis.c (twobyte_has_mandatory_prefix): New variable. |
| (end_codep): Likewise. |
| (mandatory_prefix): Likewise. |
| (active_seg_prefix): Likewise. |
| (ckprefix): Set active_seg_prefix to the active segment register |
| prefix. |
| (seg_prefix): Removed. |
| (get_valid_dis386): Use the last of PREFIX_REPNZ and PREFIX_REPZ |
| for prefix index. Ignore the index if it is invalid and the |
| mandatory prefix isn't required. |
| (print_insn): Set mandatory_prefix if the PREFIX_XXX prefix is |
| mandatory. Don't set PREFIX_REPZ/PREFIX_REPNZ/PREFIX_LOCK bits |
| in used_prefixes here. Don't print unused prefixes. Check |
| active_seg_prefix for the active segment register prefix. |
| Restore the DFLAG bit in sizeflag if the data size prefix is |
| unused. Check the unused mandatory PREFIX_XXX prefixes |
| (append_seg): Only print the segment register which gets used. |
| (OP_E_memory): Check active_seg_prefix for the segment register |
| prefix. |
| (OP_OFF): Likewise. |
| (OP_OFF64): Likewise. |
| (OP_DSreg): Set active_seg_prefix to PREFIX_DS if it is unset. |
| |
| 2014-05-02 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/16886 |
| * config.in: Regenerated. |
| * configure: Likewise. |
| * configure.in: Check if sigsetjmp is available. |
| * h8500-dis.c (private): Replace jmp_buf with OPCODES_SIGJMP_BUF. |
| (fetch_data): Replace longjmp with OPCODES_SIGLONGJMP. |
| (print_insn_h8500): Replace setjmp with OPCODES_SIGSETJMP. |
| * i386-dis.c (dis_private): Replace jmp_buf with OPCODES_SIGJMP_BUF. |
| (fetch_data): Replace longjmp with OPCODES_SIGLONGJMP. |
| (print_insn): Replace setjmp with OPCODES_SIGSETJMP. |
| * ns32k-dis.c (private): Replace jmp_buf with OPCODES_SIGJMP_BUF. |
| (fetch_data): Replace longjmp with OPCODES_SIGLONGJMP. |
| (print_insn_ns32k): Replace setjmp with OPCODES_SIGSETJMP. |
| * sysdep.h (OPCODES_SIGJMP_BUF): New macro. |
| (OPCODES_SIGSETJMP): Likewise. |
| (OPCODES_SIGLONGJMP): Likewise. |
| * vax-dis.c (private): Replace jmp_buf with OPCODES_SIGJMP_BUF. |
| (fetch_data): Replace longjmp with OPCODES_SIGLONGJMP. |
| (print_insn_vax): Replace setjmp with OPCODES_SIGSETJMP. |
| * xtensa-dis.c (dis_private): Replace jmp_buf with |
| OPCODES_SIGJMP_BUF. |
| (fetch_data): Replace longjmp with OPCODES_SIGLONGJMP. |
| (print_insn_xtensa): Replace setjmp with OPCODES_SIGSETJMP. |
| * z8k-dis.c(instr_data_s): Replace jmp_buf with OPCODES_SIGJMP_BUF. |
| (fetch_data): Replace longjmp with OPCODES_SIGLONGJMP. |
| (print_insn_z8k): Replace setjmp with OPCODES_SIGSETJMP. |
| |
| 2014-05-01 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/16891 |
| * i386-dis.c (print_insn): Handle prefixes before fwait. |
| |
| 2014-04-26 Alan Modra <amodra@gmail.com> |
| |
| * po/POTFILES.in: Regenerate. |
| |
| 2014-04-23 Andrew Bennett <andrew.bennett@imgtec.com> |
| |
| * mips-dis.c (mips_arch_choices): Update mips32r2 and mips64r2 |
| to allow the MIPS XPA ASE. |
| (parse_mips_dis_option): Process the -Mxpa option. |
| * mips-opc.c (XPA): New define. |
| (mips_builtin_opcodes): Add MIPS XPA instructions and move the |
| locations of the ctc0 and cfc0 instructions. |
| |
| 2014-04-22 Christian Svensson <blue@cmd.nu> |
| |
| * Makefile.am: Remove openrisc and or32 support. Add support for or1k. |
| * configure.in: Likewise. |
| * disassemble.c: Likewise. |
| * or1k-asm.c: New file. |
| * or1k-desc.c: New file. |
| * or1k-desc.h: New file. |
| * or1k-dis.c: New file. |
| * or1k-ibld.c: New file. |
| * or1k-opc.c: New file. |
| * or1k-opc.h: New file. |
| * or1k-opinst.c: New file. |
| * Makefile.in: Regenerate. |
| * configure: Regenerate. |
| * openrisc-asm.c: Delete. |
| * openrisc-desc.c: Delete. |
| * openrisc-desc.h: Delete. |
| * openrisc-dis.c: Delete. |
| * openrisc-ibld.c: Delete. |
| * openrisc-opc.c: Delete. |
| * openrisc-opc.h: Delete. |
| * or32-dis.c: Delete. |
| * or32-opc.c: Delete. |
| |
| 2014-04-04 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * i386-dis.c (rm_table): Add encls, enclu. |
| * i386-gen.c (cpu_flag_init): Add CPU_SE1_FLAGS, |
| (cpu_flags): Add CpuSE1. |
| * i386-opc.h (enum): Add CpuSE1. |
| (i386_cpu_flags): Add cpuse1. |
| * i386-opc.tbl: Add encls, enclu. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2014-04-02 Anthony Green <green@moxielogic.com> |
| |
| * moxie-opc.c (moxie_form1_opc_info): Add sign-extension |
| instructions, sex.b and sex.s. |
| |
| 2014-03-26 Jiong Wang <jiong.wang@arm.com> |
| |
| * aarch64-dis.c (aarch64_ext_ldst_elemlist): Check H/S undefined |
| instructions. |
| |
| 2014-03-20 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * i386-opc.tbl: Change memory size for vgatherpf0qps, vgatherpf1qps, |
| vscatterpf0qps, vscatterpf1qps, vgatherqps, vpgatherqd, vpscatterqd, |
| vscatterqps. |
| * i386-tbl.h: Regenerate. |
| |
| 2014-03-19 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * sparc-dis.c (v9_hpriv_reg_names): Names for %hstick_offset and |
| %hstick_enable added. |
| |
| 2014-03-19 Nick Clifton <nickc@redhat.com> |
| |
| * rx-decode.opc (bwl): Allow for bogus instructions with a size |
| field of 3. |
| (sbwl, ubwl, SCALE): Likewise. |
| * rx-decode.c: Regenerate. |
| |
| 2014-03-12 Alan Modra <amodra@gmail.com> |
| |
| * Makefile.in: Regenerate. |
| |
| 2014-03-05 Alan Modra <amodra@gmail.com> |
| |
| Update copyright years. |
| |
| 2014-03-04 Heiher <r@hev.cc> |
| |
| * mips-dis.c (mips_arch_choices): Usee ISA_MIPS64R2 for Loongson-3A. |
| |
| 2014-03-04 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * mips-opc.c (mips_builtin_opcodes): Move the udi* instructions |
| so that they come after the Loongson extensions. |
| |
| 2014-03-03 Alan Modra <amodra@gmail.com> |
| |
| * i386-gen.c (process_copyright): Emit copyright notice on one line. |
| |
| 2014-02-28 Alan Modra <amodra@gmail.com> |
| |
| * msp430-decode.c: Regenerate. |
| |
| 2014-02-27 Jiong Wang <jiong.wang@arm.com> |
| |
| * aarch64-tbl.h (aarch64_opcode_table): Replace IMM0 with |
| FPIMM0 for fcmeq, fcmgt, fcmge, fcmlt and fcmle. |
| |
| 2014-02-27 Yufeng Zhang <yufeng.zhang@arm.com> |
| |
| * aarch64-opc.c (print_register_offset_address): Call |
| get_int_reg_name to prepare the register name. |
| |
| 2014-02-25 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * i386-opc.tbl: Remove wrong variant of vcvtps2ph |
| * i386-tbl.h: Regenerate. |
| |
| 2014-02-20 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * i386-gen.c (cpu_flag_init): Add CPU_PREFETCHWT1_FLAGS/ |
| (cpu_flags): Add CpuPREFETCHWT1. |
| * i386-init.h: Regenerate. |
| * i386-opc.h (CpuPREFETCHWT1): New. |
| (i386_cpu_flags): Add cpuprefetchwt1. |
| * i386-opc.tbl: Cahnge CPU of prefetchwt1 from CpuAVX512PF to CpuPREFETCHWT1. |
| * i386-tbl.h: Regenerate. |
| |
| 2014-02-20 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * i386-opc.tbl: Change CPU of vptestnmq, vptestnmd from CpuAVX512CD, |
| to CpuAVX512F. |
| * i386-tbl.h: Regenerate. |
| |
| 2014-02-19 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (output_cpu_flags): Don't output trailing space. |
| (output_opcode_modifier): Likewise. |
| (output_operand_type): Likewise. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2014-02-12 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * i386-dis.c (MOD enum): Add MOD_0FC7_REG_3, MOD_0FC7_REG_4, |
| MOD_0FC7_REG_5. |
| (PREFIX enum): Add PREFIX_0FAE_REG_7. |
| (reg_table): Add MOD_0FC7_REG_3, MOD_0FC7_REG_4 MOD_0FC7_REG_5. |
| (prefix_table): Add clflusopt. |
| (mod_table): Add xrstors, xsavec, xsaves. |
| * i386-gen.c (cpu_flag_init): Add CPU_CLFLUSHOPT_FLAGS, |
| CPU_XSAVES_FLAGS, CPU_XSAVEC_FLAGS. |
| (cpu_flags): Add CpuClflushOpt, CpuXSAVES, CpuXSAVEC. |
| * i386-init.h: Regenerate. |
| * i386-opc.tbl: Add clflushopt, xrstors, xrstors64, xsaves, |
| xsaves64, xsavec, xsavec64. |
| * i386-tbl.h: Regenerate. |
| |
| 2014-02-10 Alan Modra <amodra@gmail.com> |
| |
| * po/POTFILES.in: Regenerate. |
| * po/opcodes.pot: Regenerate. |
| |
| 2014-01-30 Michael Zolotukhin <michael.v.zolotukhin@gmail.com> |
| Jan Beulich <jbeulich@suse.com> |
| |
| PR binutils/16490 |
| * i386-dis.c (OP_E_memory): Fix shift computation for |
| vex_vsib_q_w_dq_mode. |
| |
| 2014-01-09 Bradley Nelson <bradnelson@google.com> |
| Roland McGrath <mcgrathr@google.com> |
| |
| * i386-dis.c (print_insn): Do not touch all_prefixes[-1] when |
| last_rex_prefix is -1. |
| |
| 2014-01-08 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (process_copyright): Update copyright year to 2014. |
| |
| 2014-01-03 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * nds32-asm.c (parse_operand): Fix out-of-range integer constant. |
| |
| For older changes see ChangeLog-2013 |
| |
| Copyright (C) 2014 Free Software Foundation, Inc. |
| |
| Copying and distribution of this file, with or without modification, |
| are permitted in any medium without royalty provided the copyright |
| notice and this notice are preserved. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |
