ld/scripttempl/iq2000.sc - binutils-gdb - Git at Google


            
            # Copyright (C) 2014-2022 Free Software Foundation, Inc.

            
            #

            
            # Copying and distribution of this file, with or without modification,

            
            # are permitted in any medium without royalty provided the copyright

            
            # notice and this notice are preserved.

            
            #

            
            # Unusual variables checked by this code:

            
            #	NOP - four byte opcode for no-op (defaults to 0)

            
            #	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start

            
            #	INITIAL_READONLY_SECTIONS - at start of data segment

            
            #	OTHER_READONLY_SECTIONS - other than .text .init .rodata ...

            
            #		(e.g., .PARISC.milli)

            
            #	OTHER_TEXT_SECTIONS - these get put in .text when relocating

            
            #	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...

            
            #		(e.g., .PARISC.global)

            
            #	OTHER_SECTIONS - at the end

            
            #	EXECUTABLE_SYMBOLS - symbols that must be defined for an

            
            #		executable (e.g., _DYNAMIC_LINK)

            
            #	TEXT_START_SYMBOLS - symbols that appear at the start of the

            
            #		.text section.

            
            #	DATA_START_SYMBOLS - symbols that appear at the start of the

            
            #		.data section.

            
            #	OTHER_GOT_SYMBOLS - symbols defined just before .got.

            
            #	OTHER_GOT_SECTIONS - sections just after .got.

            
            #	OTHER_SDATA_SECTIONS - sections just after .sdata.

            
            #	OTHER_BSS_SYMBOLS - symbols that appear at the start of the

            
            #		.bss section besides __bss_start.

            
            #	DATA_PLT - .plt should be in data segment, not text segment.

            
            #	BSS_PLT - .plt should be in bss segment

            
            #	TEXT_DYNAMIC - .dynamic in text segment, not data segment.

            
            #	EMBEDDED - whether this is for an embedded system.

            
            #	SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set

            
            #		start address of shared library.

            
            #	INPUT_FILES - INPUT command of files to always include

            
            #	WRITABLE_RODATA - if set, the .rodata section should be writable

            
            #	INIT_START, INIT_END -  statements just before and just after

            
            #	combination of .init sections.

            
            #	FINI_START, FINI_END - statements just before and just after

            
            #	combination of .fini sections.

            
            #

            
            # When adding sections, do note that the names of some sections are used

            
            # when specifying the start address of the next.

            
            #


            #  Many sections come in three flavours.  There is the 'real' section,

            
            #  like ".data".  Then there are the per-procedure or per-variable

            
            #  sections, generated by -ffunction-sections and -fdata-sections in GCC,

            
            #  and useful for --gc-sections, which for a variable "foo" might be

            
            #  ".data.foo".  Then there are the linkonce sections, for which the linker

            
            #  eliminates duplicates, which are named like ".gnu.linkonce.d.foo".

            
            #  The exact correspondences are:

            
            #

            
            #  Section	Linkonce section

            
            #  .text	.gnu.linkonce.t.foo

            
            #  .rodata	.gnu.linkonce.r.foo

            
            #  .data	.gnu.linkonce.d.foo

            
            #  .bss		.gnu.linkonce.b.foo

            
            #  .sdata	.gnu.linkonce.s.foo

            
            #  .sbss	.gnu.linkonce.sb.foo

            
            #  .sdata2	.gnu.linkonce.s2.foo

            
            #  .sbss2	.gnu.linkonce.sb2.foo

            
            #

            
            #  Each of these can also have corresponding .rel.* and .rela.* sections.


            test -z "$ENTRY" && ENTRY=_start

            
            test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}

            
            test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}

            
            if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi

            
            test -z "${ELFSIZE}" && ELFSIZE=32

            
            test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"

            
            test "$LD_FLAG" = "N" && DATA_ADDR=.

            
            INTERP=".interp   ${RELOCATING-0} : { *(.interp) }"

            
            PLT=".plt    ${RELOCATING-0} : { *(.plt)	}"

            
            DYNAMIC=".dynamic     ${RELOCATING-0} : { *(.dynamic) }"

            
            RODATA=".rodata ${RELOCATING-0} : { *(.rodata) ${RELOCATING+*(.rodata.*)} ${RELOCATING+*(.gnu.linkonce.r.*)} }"

            
            SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2) ${RELOCATING+*(.sbss2.*)} ${RELOCATING+*(.gnu.linkonce.sb2.*)} }"

            
            SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2) ${RELOCATING+*(.sdata2.*)} ${RELOCATING+*(.gnu.linkonce.s2.*)} }"

            
            CTOR=".ctors ${CONSTRUCTING-0} :

            
              {

            
                ${CONSTRUCTING+${CTOR_START}}

            
                /* gcc uses crtbegin.o to find the start of

            
                   the constructors, so we make sure it is

            
                   first.  Because this is a wildcard, it

            
                   doesn't matter if the user does not

            
                   actually link against crtbegin.o; the

            
                   linker won't look for a file to match a

            
                   wildcard.  The wildcard also means that it

            
                   doesn't matter which directory crtbegin.o

            
                   is in.  */


                KEEP (*crtbegin.o(.ctors))

            
                KEEP (*crtbegin?.o(.ctors))


                /* We don't want to include the .ctor section from

            
                   the crtend.o file until after the sorted ctors.

            
                   The .ctor section from the crtend file contains the

            
                   end of ctors marker and it must be last */


                KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))

            
                KEEP (*(SORT(.ctors.*)))

            
                KEEP (*(.ctors))

            
                ${CONSTRUCTING+${CTOR_END}}

            
              }"


            DTOR=" .dtors       ${CONSTRUCTING-0} :

            
              {

            
                ${CONSTRUCTING+${DTOR_START}}

            
                KEEP (*crtbegin.o(.dtors))

            
                KEEP (*crtbegin?.o(.dtors))

            
                KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))

            
                KEEP (*(SORT(.dtors.*)))

            
                KEEP (*(.dtors))

            
                ${CONSTRUCTING+${DTOR_END}}

            
              }"


            # If this is for an embedded system, don't add SIZEOF_HEADERS.

            
            if [ -z "$EMBEDDED" ]; then

            
               test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"

            
            else

            
               test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"

            
            fi


            cat <<EOF

            
            /* Copyright (C) 2014-2022 Free Software Foundation, Inc.


               Copying and distribution of this script, with or without modification,

            
               are permitted in any medium without royalty provided the copyright

            
               notice and this notice are preserved.  */


            OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",

            
            	      "${LITTLE_OUTPUT_FORMAT}")

            
            OUTPUT_ARCH(${OUTPUT_ARCH})

            
            ${RELOCATING+ENTRY(${ENTRY})}


            ${RELOCATING+${LIB_SEARCH_DIRS}}

            
            ${RELOCATING+/* Do we need any of these for elf?

            
               __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}}  */}

            
            ${RELOCATING+${EXECUTABLE_SYMBOLS}}

            
            ${RELOCATING+${INPUT_FILES}}

            
            ${RELOCATING- /* For some reason, the Solaris linker makes bad executables

            
              if gld -r is used and the intermediate file has sections starting

            
              at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld

            
              bug.  But for now assigning the zero vmas works.  */}


            SECTIONS

            
            {

            
              ${CREATE_SHLIB-${RELOCATING+. = ${TEXT_BASE_ADDRESS};}}

            
              ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}

            
              ${CREATE_SHLIB-${INTERP}}

            
              ${TEXT_DYNAMIC+${DYNAMIC}}


            EOF

            
            if [ "x$COMBRELOC" = x ]; then

            
              COMBRELOCCAT=cat

            
            else

            
              COMBRELOCCAT="cat > $COMBRELOC"

            
            fi

            
            eval $COMBRELOCCAT <<EOF

            
              .rel.init    ${RELOCATING-0} : { *(.rel.init)	}

            
              .rela.init   ${RELOCATING-0} : { *(.rela.init)	}

            
              .rel.text    ${RELOCATING-0} :

            
                {

            
                  *(.rel.text)

            
                  ${RELOCATING+*(.rel.text.*)}

            
                  ${RELOCATING+*(.rel.gnu.linkonce.t.*)}

            
                }

            
              .rela.text   ${RELOCATING-0} :

            
                {

            
                  *(.rela.text)

            
                  ${RELOCATING+*(.rela.text.*)}

            
                  ${RELOCATING+*(.rela.gnu.linkonce.t.*)}

            
                }

            
              .rel.fini    ${RELOCATING-0} : { *(.rel.fini)	}

            
              .rela.fini   ${RELOCATING-0} : { *(.rela.fini)	}

            
              .rel.rodata  ${RELOCATING-0} :

            
                {

            
                  *(.rel.rodata)

            
                  ${RELOCATING+*(.rel.rodata.*)}

            
                  ${RELOCATING+*(.rel.gnu.linkonce.r.*)}

            
                }

            
              .rela.rodata ${RELOCATING-0} :

            
                {

            
                  *(.rela.rodata)

            
                  ${RELOCATING+*(.rela.rodata.*)}

            
                  ${RELOCATING+*(.rela.gnu.linkonce.r.*)}

            
                }

            
              ${OTHER_READONLY_RELOC_SECTIONS}

            
              .rel.data    ${RELOCATING-0} :

            
                {

            
                  *(.rel.data)

            
                  ${RELOCATING+*(.rel.data.*)}

            
                  ${RELOCATING+*(.rel.gnu.linkonce.d.*)}

            
                }

            
              .rela.data   ${RELOCATING-0} :

            
                {

            
                  *(.rela.data)

            
                  ${RELOCATING+*(.rela.data.*)}

            
                  ${RELOCATING+*(.rela.gnu.linkonce.d.*)}

            
                }

            
              .rel.ctors   ${RELOCATING-0} : { *(.rel.ctors)	}

            
              .rela.ctors  ${RELOCATING-0} : { *(.rela.ctors)	}

            
              .rel.dtors   ${RELOCATING-0} : { *(.rel.dtors)	}

            
              .rela.dtors  ${RELOCATING-0} : { *(.rela.dtors)	}

            
              .rel.got     ${RELOCATING-0} : { *(.rel.got)		}

            
              .rela.got    ${RELOCATING-0} : { *(.rela.got)		}

            
              ${OTHER_GOT_RELOC_SECTIONS}

            
              .rel.sdata   ${RELOCATING-0} :

            
                {

            
                  *(.rel.sdata)

            
                  ${RELOCATING+*(.rel.sdata.*)}

            
                  ${RELOCATING+*(.rel.gnu.linkonce.s.*)}

            
                }

            
              .rela.sdata   ${RELOCATING-0} :

            
                {

            
                  *(.rela.sdata)

            
                  ${RELOCATING+*(.rela.sdata.*)}

            
                  ${RELOCATING+*(.rela.gnu.linkonce.s.*)}

            
                }

            
              .rel.sbss    ${RELOCATING-0} :

            
                {

            
                  *(.rel.sbss)

            
                  ${RELOCATING+*(.rel.sbss.*)}

            
                  ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}

            
                }

            
              .rela.sbss   ${RELOCATING-0} :

            
                {

            
                  *(.rela.sbss)

            
                  ${RELOCATING+*(.rela.sbss.*)}

            
                  ${RELOCATING+*(.rela.gnu.linkonce.sb.*)}

            
                }

            
              .rel.sdata2  ${RELOCATING-0} :

            
                {

            
                  *(.rel.sdata2)

            
                  ${RELOCATING+*(.rel.sdata2.*)}

            
                  ${RELOCATING+*(.rel.gnu.linkonce.s2.*)}

            
                }

            
              .rela.sdata2 ${RELOCATING-0} :

            
                {

            
                  *(.rela.sdata2)

            
                  ${RELOCATING+*(.rela.sdata2.*)}

            
                  ${RELOCATING+*(.rela.gnu.linkonce.s2.*)}

            
                }

            
              .rel.sbss2   ${RELOCATING-0} :

            
                {

            
                  *(.rel.sbss2)

            
                  ${RELOCATING+*(.rel.sbss2.*)}

            
                  ${RELOCATING+*(.rel.gnu.linkonce.sb2.*)}

            
                }

            
              .rela.sbss2  ${RELOCATING-0} :

            
                {

            
                  *(.rela.sbss2)

            
                  ${RELOCATING+*(.rela.sbss2.*)}

            
                  ${RELOCATING+*(.rela.gnu.linkonce.sb2.*)}

            
                }

            
              .rel.bss     ${RELOCATING-0} :

            
                {

            
                  *(.rel.bss)

            
                  ${RELOCATING+*(.rel.bss.*)}

            
                  ${RELOCATING+*(.rel.gnu.linkonce.b.*)}

            
                }

            
              .rela.bss    ${RELOCATING-0} :

            
                {

            
                  *(.rela.bss)

            
                  ${RELOCATING+*(.rela.bss.*)}

            
                  ${RELOCATING+*(.rela.gnu.linkonce.b.*)}

            
                }

            
            EOF

            
            if [ -n "$COMBRELOC" ]; then

            
            cat <<EOF

            
              .rel.dyn	 :

            
                {

            
            EOF

            
            sed -e '/^[	 ]*[{}][	 ]*$/d;/:[	 ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC

            
            cat <<EOF

            
                }

            
              .rela.dyn	 :

            
                {

            
            EOF

            
            sed -e '/^[	 ]*[{}][	 ]*$/d;/:[	 ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC

            
            cat <<EOF

            
                }

            
            EOF

            
            fi

            
            cat <<EOF

            
              .rel.plt     ${RELOCATING-0} : { *(.rel.plt)		}

            
              .rela.plt    ${RELOCATING-0} : { *(.rela.plt)		}

            
              ${OTHER_PLT_RELOC_SECTIONS}


              .init        ${RELOCATING-0} :

            
              {

            
                ${RELOCATING+${INIT_START}}

            
                KEEP (*(SORT_NONE(.init)))

            
                ${RELOCATING+${INIT_END}}

            
              } =${NOP-0}


              ${DATA_PLT-${BSS_PLT-${PLT}}}

            
              .text    ${RELOCATING-0} :

            
              {

            
                ${RELOCATING+${TEXT_START_SYMBOLS}}

            
                *(.text)

            
                ${RELOCATING+*(.text.*)}

            
                *(.stub)

            
                /* .gnu.warning sections are handled specially by elf.em.  */

            
                *(.gnu.warning)

            
                ${RELOCATING+*(.gnu.linkonce.t.*)}

            
                ${RELOCATING+${OTHER_TEXT_SECTIONS}}

            
              } =${NOP-0}

            
              .fini    ${RELOCATING-0} :

            
              {

            
                ${RELOCATING+${FINI_START}}

            
                KEEP (*(SORT_NONE(.fini)))

            
                ${RELOCATING+${FINI_END}}

            
              } =${NOP-0}

            
              ${RELOCATING+PROVIDE (__etext = .);}

            
              ${RELOCATING+PROVIDE (_etext = .);}

            
              ${RELOCATING+PROVIDE (etext = .);}


              /* Adjust the address for the data segment.  We want to adjust up to

            
                 the same address within the page on the next page up.  */

            
              ${CREATE_SHLIB-${RELOCATING+. = ${DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}

            
              ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}


              .data  ${RELOCATING-0} :

            
              {

            
                ${RELOCATING+${DATA_START_SYMBOLS}}

            
                *(.data)

            
                ${RELOCATING+*(.data.*)}

            
                ${RELOCATING+*(.gnu.linkonce.d.*)}

            
                ${CONSTRUCTING+SORT(CONSTRUCTORS)}

            
              }

            
              .data1 ${RELOCATING-0} : { *(.data1) }

            
              .eh_frame ${RELOCATING-0} :

            
              {

            
                ${RELOCATING+PROVIDE (__eh_frame_begin = .);}

            
                *(.eh_frame)

            
                ${RELOCATING+LONG (0);}

            
                ${RELOCATING+PROVIDE (__eh_frame_end = .);}

            
              }

            
              .gcc_except_table : { *(.gcc_except_table) }

            
              ${INITIAL_READONLY_SECTIONS}

            
              .hash        ${RELOCATING-0} : { *(.hash)		}

            
              .dynsym      ${RELOCATING-0} : { *(.dynsym)		}

            
              .dynstr      ${RELOCATING-0} : { *(.dynstr)		}

            
              .gnu.version ${RELOCATING-0} : { *(.gnu.version)	}

            
              .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d)	}

            
              .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r)	}

            
              ${RODATA}

            
              .rodata1 ${RELOCATING-0} : { *(.rodata1) }

            
              ${CREATE_SHLIB-${SDATA2}}

            
              ${CREATE_SHLIB-${SBSS2}}

            
              ${RELOCATING+${OTHER_READONLY_SECTIONS}}

            
              ${RELOCATING+${OTHER_READWRITE_SECTIONS}}

            
              ${TEXT_DYNAMIC-${DYNAMIC}}

            
              ${RELOCATING+${CTOR}}

            
              ${RELOCATING+${DTOR}}

            
              .jcr : { KEEP (*(.jcr)) }

            
              ${DATA_PLT+${PLT}}

            
              ${RELOCATING+${OTHER_GOT_SYMBOLS}}

            
              .got		${RELOCATING-0} : {${RELOCATING+ *(.got.plt)} *(.got) }

            
              ${RELOCATING+${OTHER_GOT_SECTIONS}}

            
              ${CREATE_SHLIB+${SDATA2}}

            
              ${CREATE_SHLIB+${SBSS2}}

            
              /* We want the small data sections together, so single-instruction offsets

            
                 can access them all, and initialized data all before uninitialized, so

            
                 we can shorten the on-disk segment size.  */

            
              .sdata   ${RELOCATING-0} :

            
              {

            
                ${RELOCATING+${SDATA_START_SYMBOLS}}

            
                *(.sdata)

            
                ${RELOCATING+*(.sdata.*)}

            
                ${RELOCATING+*(.gnu.linkonce.s.*)}

            
              }

            
              ${RELOCATING+${OTHER_SDATA_SECTIONS}}

            
              ${RELOCATING+_edata = .;}

            
              ${RELOCATING+PROVIDE (edata = .);}

            
              ${RELOCATING+__bss_start = .;}

            
              ${RELOCATING+${OTHER_BSS_SYMBOLS}}

            
              .sbss    ${RELOCATING-0} :

            
              {

            
                ${RELOCATING+PROVIDE (__sbss_start = .);}

            
                ${RELOCATING+PROVIDE (___sbss_start = .);}

            
                ${RELOCATING+*(.dynsbss)}

            
                *(.sbss)

            
                ${RELOCATING+*(.sbss.*)}

            
                ${RELOCATING+*(.gnu.linkonce.sb.*)}

            
                ${RELOCATING+*(.scommon)}

            
                ${RELOCATING+PROVIDE (__sbss_end = .);}

            
                ${RELOCATING+PROVIDE (___sbss_end = .);}

            
              }

            
              ${BSS_PLT+${PLT}}

            
              .bss     ${RELOCATING-0} :

            
              {

            
               ${RELOCATING+*(.dynbss)}

            
               *(.bss)

            
               ${RELOCATING+*(.bss.*)}

            
               ${RELOCATING+*(.gnu.linkonce.b.*)}

            
               ${RELOCATING+*(COMMON)

            
               /* Align here to ensure that the .bss section occupies space up to

            
                  _end.  Align after .bss to ensure correct alignment even if the

            
                  .bss section disappears because there are no input sections.  */

            
               . = ALIGN(${ALIGNMENT});}

            
              }

            
              ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}

            
              ${RELOCATING+. = ALIGN(${ALIGNMENT});}

            
              ${RELOCATING+${OTHER_END_SYMBOLS}}

            
              ${RELOCATING+_end = .;}

            
              ${RELOCATING+PROVIDE (end = .);}


              /* Stabs debugging sections.  */

            
              .stab 0 : { *(.stab) }

            
              .stabstr 0 : { *(.stabstr) }

            
              .stab.excl 0 : { *(.stab.excl) }

            
              .stab.exclstr 0 : { *(.stab.exclstr) }

            
              .stab.index 0 : { *(.stab.index) }

            
              .stab.indexstr 0 : { *(.stab.indexstr) }


              .comment 0 : { *(.comment) }


            EOF


            . $srcdir/scripttempl/DWARF.sc


            cat <<EOF

            
              ${RELOCATING+${OTHER_RELOCATING_SECTIONS}}


              /* These must appear regardless of ${RELOCATING}.  */

            
              ${OTHER_SECTIONS}

            
            }

            
            EOF
	# Copyright (C) 2014-2022 Free Software Foundation, Inc.
	#
	# Copying and distribution of this file, with or without modification,
	# are permitted in any medium without royalty provided the copyright
	# notice and this notice are preserved.
	#
	# Unusual variables checked by this code:
	# NOP - four byte opcode for no-op (defaults to 0)
	# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
	# INITIAL_READONLY_SECTIONS - at start of data segment
	# OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
	# (e.g., .PARISC.milli)
	# OTHER_TEXT_SECTIONS - these get put in .text when relocating
	# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
	# (e.g., .PARISC.global)
	# OTHER_SECTIONS - at the end
	# EXECUTABLE_SYMBOLS - symbols that must be defined for an
	# executable (e.g., _DYNAMIC_LINK)
	# TEXT_START_SYMBOLS - symbols that appear at the start of the
	# .text section.
	# DATA_START_SYMBOLS - symbols that appear at the start of the
	# .data section.
	# OTHER_GOT_SYMBOLS - symbols defined just before .got.
	# OTHER_GOT_SECTIONS - sections just after .got.
	# OTHER_SDATA_SECTIONS - sections just after .sdata.
	# OTHER_BSS_SYMBOLS - symbols that appear at the start of the
	# .bss section besides __bss_start.
	# DATA_PLT - .plt should be in data segment, not text segment.
	# BSS_PLT - .plt should be in bss segment
	# TEXT_DYNAMIC - .dynamic in text segment, not data segment.
	# EMBEDDED - whether this is for an embedded system.
	# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
	# start address of shared library.
	# INPUT_FILES - INPUT command of files to always include
	# WRITABLE_RODATA - if set, the .rodata section should be writable
	# INIT_START, INIT_END - statements just before and just after
	# combination of .init sections.
	# FINI_START, FINI_END - statements just before and just after
	# combination of .fini sections.
	#
	# When adding sections, do note that the names of some sections are used
	# when specifying the start address of the next.
	#

	# Many sections come in three flavours. There is the 'real' section,
	# like ".data". Then there are the per-procedure or per-variable
	# sections, generated by -ffunction-sections and -fdata-sections in GCC,
	# and useful for --gc-sections, which for a variable "foo" might be
	# ".data.foo". Then there are the linkonce sections, for which the linker
	# eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
	# The exact correspondences are:
	#
	# Section Linkonce section
	# .text .gnu.linkonce.t.foo
	# .rodata .gnu.linkonce.r.foo
	# .data .gnu.linkonce.d.foo
	# .bss .gnu.linkonce.b.foo
	# .sdata .gnu.linkonce.s.foo
	# .sbss .gnu.linkonce.sb.foo
	# .sdata2 .gnu.linkonce.s2.foo
	# .sbss2 .gnu.linkonce.sb2.foo
	#
	# Each of these can also have corresponding .rel.* and .rela.* sections.

	test -z "$ENTRY" && ENTRY=_start
	test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
	test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
	if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
	test -z "${ELFSIZE}" && ELFSIZE=32
	test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
	test "$LD_FLAG" = "N" && DATA_ADDR=.
	INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
	PLT=".plt ${RELOCATING-0} : { *(.plt) }"
	DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
	RODATA=".rodata ${RELOCATING-0} : { (.rodata) ${RELOCATING+(.rodata.)} ${RELOCATING+(.gnu.linkonce.r.*)} }"
	SBSS2=".sbss2 ${RELOCATING-0} : { (.sbss2) ${RELOCATING+(.sbss2.)} ${RELOCATING+(.gnu.linkonce.sb2.*)} }"
	SDATA2=".sdata2 ${RELOCATING-0} : { (.sdata2) ${RELOCATING+(.sdata2.)} ${RELOCATING+(.gnu.linkonce.s2.*)} }"
	CTOR=".ctors ${CONSTRUCTING-0} :
	{
	${CONSTRUCTING+${CTOR_START}}
	/* gcc uses crtbegin.o to find the start of
	the constructors, so we make sure it is
	first. Because this is a wildcard, it
	doesn't matter if the user does not
	actually link against crtbegin.o; the
	linker won't look for a file to match a
	wildcard. The wildcard also means that it
	doesn't matter which directory crtbegin.o
	is in. */

	KEEP (*crtbegin.o(.ctors))
	KEEP (*crtbegin?.o(.ctors))

	/* We don't want to include the .ctor section from
	the crtend.o file until after the sorted ctors.
	The .ctor section from the crtend file contains the
	end of ctors marker and it must be last */

	KEEP ((EXCLUDE_FILE (crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
	KEEP ((SORT(.ctors.)))
	KEEP (*(.ctors))
	${CONSTRUCTING+${CTOR_END}}
	}"

	DTOR=" .dtors ${CONSTRUCTING-0} :
	{
	${CONSTRUCTING+${DTOR_START}}
	KEEP (*crtbegin.o(.dtors))
	KEEP (*crtbegin?.o(.dtors))
	KEEP ((EXCLUDE_FILE (crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
	KEEP ((SORT(.dtors.)))
	KEEP (*(.dtors))
	${CONSTRUCTING+${DTOR_END}}
	}"

	# If this is for an embedded system, don't add SIZEOF_HEADERS.
	if [ -z "$EMBEDDED" ]; then
	test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
	else
	test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
	fi

	cat <<EOF
	/* Copyright (C) 2014-2022 Free Software Foundation, Inc.

	Copying and distribution of this script, with or without modification,
	are permitted in any medium without royalty provided the copyright
	notice and this notice are preserved. */

	OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
	"${LITTLE_OUTPUT_FORMAT}")
	OUTPUT_ARCH(${OUTPUT_ARCH})
	${RELOCATING+ENTRY(${ENTRY})}

	${RELOCATING+${LIB_SEARCH_DIRS}}
	${RELOCATING+/* Do we need any of these for elf?
	__DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
	${RELOCATING+${EXECUTABLE_SYMBOLS}}
	${RELOCATING+${INPUT_FILES}}
	${RELOCATING- /* For some reason, the Solaris linker makes bad executables
	if gld -r is used and the intermediate file has sections starting
	at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
	bug. But for now assigning the zero vmas works. */}

	SECTIONS
	{
	${CREATE_SHLIB-${RELOCATING+. = ${TEXT_BASE_ADDRESS};}}
	${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
	${CREATE_SHLIB-${INTERP}}
	${TEXT_DYNAMIC+${DYNAMIC}}

	EOF
	if [ "x$COMBRELOC" = x ]; then
	COMBRELOCCAT=cat
	else
	COMBRELOCCAT="cat > $COMBRELOC"
	fi
	eval $COMBRELOCCAT <<EOF
	.rel.init ${RELOCATING-0} : { *(.rel.init) }
	.rela.init ${RELOCATING-0} : { *(.rela.init) }
	.rel.text ${RELOCATING-0} :
	{
	*(.rel.text)
	${RELOCATING+(.rel.text.)}
	${RELOCATING+(.rel.gnu.linkonce.t.)}
	}
	.rela.text ${RELOCATING-0} :
	{
	*(.rela.text)
	${RELOCATING+(.rela.text.)}
	${RELOCATING+(.rela.gnu.linkonce.t.)}
	}
	.rel.fini ${RELOCATING-0} : { *(.rel.fini) }
	.rela.fini ${RELOCATING-0} : { *(.rela.fini) }
	.rel.rodata ${RELOCATING-0} :
	{
	*(.rel.rodata)
	${RELOCATING+(.rel.rodata.)}
	${RELOCATING+(.rel.gnu.linkonce.r.)}
	}
	.rela.rodata ${RELOCATING-0} :
	{
	*(.rela.rodata)
	${RELOCATING+(.rela.rodata.)}
	${RELOCATING+(.rela.gnu.linkonce.r.)}
	}
	${OTHER_READONLY_RELOC_SECTIONS}
	.rel.data ${RELOCATING-0} :
	{
	*(.rel.data)
	${RELOCATING+(.rel.data.)}
	${RELOCATING+(.rel.gnu.linkonce.d.)}
	}
	.rela.data ${RELOCATING-0} :
	{
	*(.rela.data)
	${RELOCATING+(.rela.data.)}
	${RELOCATING+(.rela.gnu.linkonce.d.)}
	}
	.rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
	.rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
	.rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
	.rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
	.rel.got ${RELOCATING-0} : { *(.rel.got) }
	.rela.got ${RELOCATING-0} : { *(.rela.got) }
	${OTHER_GOT_RELOC_SECTIONS}
	.rel.sdata ${RELOCATING-0} :
	{
	*(.rel.sdata)
	${RELOCATING+(.rel.sdata.)}
	${RELOCATING+(.rel.gnu.linkonce.s.)}
	}
	.rela.sdata ${RELOCATING-0} :
	{
	*(.rela.sdata)
	${RELOCATING+(.rela.sdata.)}
	${RELOCATING+(.rela.gnu.linkonce.s.)}
	}
	.rel.sbss ${RELOCATING-0} :
	{
	*(.rel.sbss)
	${RELOCATING+(.rel.sbss.)}
	${RELOCATING+(.rel.gnu.linkonce.sb.)}
	}
	.rela.sbss ${RELOCATING-0} :
	{
	*(.rela.sbss)
	${RELOCATING+(.rela.sbss.)}
	${RELOCATING+(.rela.gnu.linkonce.sb.)}
	}
	.rel.sdata2 ${RELOCATING-0} :
	{
	*(.rel.sdata2)
	${RELOCATING+(.rel.sdata2.)}
	${RELOCATING+(.rel.gnu.linkonce.s2.)}
	}
	.rela.sdata2 ${RELOCATING-0} :
	{
	*(.rela.sdata2)
	${RELOCATING+(.rela.sdata2.)}
	${RELOCATING+(.rela.gnu.linkonce.s2.)}
	}
	.rel.sbss2 ${RELOCATING-0} :
	{
	*(.rel.sbss2)
	${RELOCATING+(.rel.sbss2.)}
	${RELOCATING+(.rel.gnu.linkonce.sb2.)}
	}
	.rela.sbss2 ${RELOCATING-0} :
	{
	*(.rela.sbss2)
	${RELOCATING+(.rela.sbss2.)}
	${RELOCATING+(.rela.gnu.linkonce.sb2.)}
	}
	.rel.bss ${RELOCATING-0} :
	{
	*(.rel.bss)
	${RELOCATING+(.rel.bss.)}
	${RELOCATING+(.rel.gnu.linkonce.b.)}
	}
	.rela.bss ${RELOCATING-0} :
	{
	*(.rela.bss)
	${RELOCATING+(.rela.bss.)}
	${RELOCATING+(.rela.gnu.linkonce.b.)}
	}
	EOF
	if [ -n "$COMBRELOC" ]; then
	cat <<EOF
	.rel.dyn :
	{
	EOF
	sed -e '/^[ ][{}][ ]$/d;/:[ ]$/d;/\.rela\./d;s/^.: { \(.\)}$/ \1/' $COMBRELOC
	cat <<EOF
	}
	.rela.dyn :
	{
	EOF
	sed -e '/^[ ][{}][ ]$/d;/:[ ]$/d;/\.rel\./d;s/^.: { \(.\)}/ \1/' $COMBRELOC
	cat <<EOF
	}
	EOF
	fi
	cat <<EOF
	.rel.plt ${RELOCATING-0} : { *(.rel.plt) }
	.rela.plt ${RELOCATING-0} : { *(.rela.plt) }
	${OTHER_PLT_RELOC_SECTIONS}

	.init ${RELOCATING-0} :
	{
	${RELOCATING+${INIT_START}}
	KEEP (*(SORT_NONE(.init)))
	${RELOCATING+${INIT_END}}
	} =${NOP-0}

	${DATA_PLT-${BSS_PLT-${PLT}}}
	.text ${RELOCATING-0} :
	{
	${RELOCATING+${TEXT_START_SYMBOLS}}
	*(.text)
	${RELOCATING+(.text.)}
	*(.stub)
	/* .gnu.warning sections are handled specially by elf.em. */
	*(.gnu.warning)
	${RELOCATING+(.gnu.linkonce.t.)}
	${RELOCATING+${OTHER_TEXT_SECTIONS}}
	} =${NOP-0}
	.fini ${RELOCATING-0} :
	{
	${RELOCATING+${FINI_START}}
	KEEP (*(SORT_NONE(.fini)))
	${RELOCATING+${FINI_END}}
	} =${NOP-0}
	${RELOCATING+PROVIDE (__etext = .);}
	${RELOCATING+PROVIDE (_etext = .);}
	${RELOCATING+PROVIDE (etext = .);}

	/* Adjust the address for the data segment. We want to adjust up to
	the same address within the page on the next page up. */
	${CREATE_SHLIB-${RELOCATING+. = ${DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}
	${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}

	.data ${RELOCATING-0} :
	{
	${RELOCATING+${DATA_START_SYMBOLS}}
	*(.data)
	${RELOCATING+(.data.)}
	${RELOCATING+(.gnu.linkonce.d.)}
	${CONSTRUCTING+SORT(CONSTRUCTORS)}
	}
	.data1 ${RELOCATING-0} : { *(.data1) }
	.eh_frame ${RELOCATING-0} :
	{
	${RELOCATING+PROVIDE (__eh_frame_begin = .);}
	*(.eh_frame)
	${RELOCATING+LONG (0);}
	${RELOCATING+PROVIDE (__eh_frame_end = .);}
	}
	.gcc_except_table : { *(.gcc_except_table) }
	${INITIAL_READONLY_SECTIONS}
	.hash ${RELOCATING-0} : { *(.hash) }
	.dynsym ${RELOCATING-0} : { *(.dynsym) }
	.dynstr ${RELOCATING-0} : { *(.dynstr) }
	.gnu.version ${RELOCATING-0} : { *(.gnu.version) }
	.gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d) }
	.gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r) }
	${RODATA}
	.rodata1 ${RELOCATING-0} : { *(.rodata1) }
	${CREATE_SHLIB-${SDATA2}}
	${CREATE_SHLIB-${SBSS2}}
	${RELOCATING+${OTHER_READONLY_SECTIONS}}
	${RELOCATING+${OTHER_READWRITE_SECTIONS}}
	${TEXT_DYNAMIC-${DYNAMIC}}
	${RELOCATING+${CTOR}}
	${RELOCATING+${DTOR}}
	.jcr : { KEEP (*(.jcr)) }
	${DATA_PLT+${PLT}}
	${RELOCATING+${OTHER_GOT_SYMBOLS}}
	.got ${RELOCATING-0} : {${RELOCATING+ (.got.plt)} (.got) }
	${RELOCATING+${OTHER_GOT_SECTIONS}}
	${CREATE_SHLIB+${SDATA2}}
	${CREATE_SHLIB+${SBSS2}}
	/* We want the small data sections together, so single-instruction offsets
	can access them all, and initialized data all before uninitialized, so
	we can shorten the on-disk segment size. */
	.sdata ${RELOCATING-0} :
	{
	${RELOCATING+${SDATA_START_SYMBOLS}}
	*(.sdata)
	${RELOCATING+(.sdata.)}
	${RELOCATING+(.gnu.linkonce.s.)}
	}
	${RELOCATING+${OTHER_SDATA_SECTIONS}}
	${RELOCATING+_edata = .;}
	${RELOCATING+PROVIDE (edata = .);}
	${RELOCATING+__bss_start = .;}
	${RELOCATING+${OTHER_BSS_SYMBOLS}}
	.sbss ${RELOCATING-0} :
	{
	${RELOCATING+PROVIDE (__sbss_start = .);}
	${RELOCATING+PROVIDE (___sbss_start = .);}
	${RELOCATING+*(.dynsbss)}
	*(.sbss)
	${RELOCATING+(.sbss.)}
	${RELOCATING+(.gnu.linkonce.sb.)}
	${RELOCATING+*(.scommon)}
	${RELOCATING+PROVIDE (__sbss_end = .);}
	${RELOCATING+PROVIDE (___sbss_end = .);}
	}
	${BSS_PLT+${PLT}}
	.bss ${RELOCATING-0} :
	{
	${RELOCATING+*(.dynbss)}
	*(.bss)
	${RELOCATING+(.bss.)}
	${RELOCATING+(.gnu.linkonce.b.)}
	${RELOCATING+*(COMMON)
	/* Align here to ensure that the .bss section occupies space up to
	_end. Align after .bss to ensure correct alignment even if the
	.bss section disappears because there are no input sections. */
	. = ALIGN(${ALIGNMENT});}
	}
	${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
	${RELOCATING+. = ALIGN(${ALIGNMENT});}
	${RELOCATING+${OTHER_END_SYMBOLS}}
	${RELOCATING+_end = .;}
	${RELOCATING+PROVIDE (end = .);}

	/* Stabs debugging sections. */
	.stab 0 : { *(.stab) }
	.stabstr 0 : { *(.stabstr) }
	.stab.excl 0 : { *(.stab.excl) }
	.stab.exclstr 0 : { *(.stab.exclstr) }
	.stab.index 0 : { *(.stab.index) }
	.stab.indexstr 0 : { *(.stab.indexstr) }

	.comment 0 : { *(.comment) }

	EOF

	. $srcdir/scripttempl/DWARF.sc

	cat <<EOF
	${RELOCATING+${OTHER_RELOCATING_SECTIONS}}

	/* These must appear regardless of ${RELOCATING}. */
	${OTHER_SECTIONS}
	}
	EOF