| 2005-12-31 Jerry DeLisle <jvdelisle@gcc.gnu.org> |
| |
| PR libfortran/25594 |
| PR libfortran/25419 |
| * io/list_read.c (list_formatted_read_scalar): Test for comma to return |
| a null value (default). Revert patch of 25419 on 2005-12-28. |
| |
| 2005-12-28 Jerry DeLisle <jvdelisle@gcc.gnu.org> |
| |
| PR libfortran/25139 |
| * io/unix.c (fd_truncate): Set s->active to zero. |
| PR libfortran/25510 |
| * libgfortran.h: Add ERROR_INTERNAL and ERROR_INTERNAL_UNIT. |
| * runtime/error.c (translate_error): Add messages for new errors. |
| * io/list_read.c (next_char): Use new errors. |
| * io/transfer.c (next_record_r) (next_record_w): Use new errors. |
| |
| 2005-12-28 Jerry DeLisle <jvdelisle@gcc.gnu.org> |
| |
| PR libfortran/25550 |
| * io/file_pos.c (st_rewind): Reset bytes left so no error occurs in |
| next_record_r. |
| |
| 2005-12-28 Jerry DeLisle <jvdelisle@gcc.gnu.org> |
| |
| PR libfortran/25419 |
| * io/list_read.c (list_formatted_read_scalar): Allow comma to return a |
| null value (default). |
| |
| 2005-12-21 Jerry DeLisle <jvdelisle@gcc.gnu.org> |
| |
| PR libfortran/25307 |
| * io/list_read.c (next_char): Handle end-of-file conditions for |
| internal units and add support for internal character array units. |
| |
| 2005-12-18 Jerry DeLisle <jvdelisle@gcc.gnu.org> |
| |
| PR libfortran/25463 |
| * io/transfer.c (finalize_transfer): Fix execution order so that |
| next_record is set to zero in all cases. |
| |
| 2005-12-16 Jerry DeLisle <jvdelisle@gcc.gnu.org> |
| |
| PR libfortran/25264 |
| PR libfortran/25349 |
| * io/unit.c (get_unit): Delete code that cleared the string when the |
| unit was opened, which is too soon. |
| * io/transfer.c (next_record_w): Pass done flag in. Change logic for |
| setting max_pos. Add code to position unit and pad record as needed. |
| |
| 2005-12-13 Richard Sandiford <richard@codesourcery.com> |
| Victor Leikehman <LEI@il.ibm.com> |
| |
| * m4/matmul.m4: Use a different order in the special case of a |
| transposed first argument. |
| * generated/matmul_c4.c, generated/matmul_c8.c, generated/matmul_c10.c, |
| * generated/matmul_c16.c, generated/matmul_i4.c, generated/matmul_i8.c, |
| * generated/matmul_i10.c, generated/matmul_r4.c, generated/matmul_r8.c |
| * generated/matmul_r10.c, generated/matmul_r16.c: Regenerated. |
| |
| 2005-12-10 Janne Blomqvist <jb@gcc.gnu.org> |
| |
| * Makefile.am: Enable loop unrolling for matmul. |
| * configure: Regenerated. |
| * Makefile.in: Regenerated. |
| * aclocal.m4: Regenerated. |
| |
| 2005-12-10 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR fortran/23815 |
| * io/file_pos.c (unformatted_backspace): If flags.convert |
| does not equal CONVERT_NATIVE, reverse the record marker. |
| * io/open.c: Add convert_opt[]. |
| (st_open): If no convert option is given, set CONVERT_NATIVE. |
| If CONVERT_BIG or CONVERT_LITTLE are given, set flags.convert to |
| CONVERT_NATIVE or CONVERT_SWAP (depending on wether we have |
| a big- or little-endian system). |
| * io/transfer.c (unformatted_read): Remove unused attribute |
| from arguments. |
| If we need to reverse |
| bytes, break up large transfers into a loop. Split complex |
| numbers into its two parts. |
| (unformatted_write): Likewise. |
| (us_read): If flags.convert does not equal CONVERT_NATIVE, |
| reverse the record marker. |
| (next_record_w): Likewise. |
| (reverse_memcpy): New function. |
| * io/inquire.c (inquire_via_unit): Implement convert. |
| * io/io.h (top level): Add enum unit_convert. |
| Add convert to st_parameter_open and st_parameter_inquire. |
| Define IOPARM_OPEN_HAS_CONVERT and IOPARM_INQUIRE_HAS_CONVERT. |
| Increase padding for st_parameter_dt. |
| Declare reverse_memcpy(). |
| |
| 2005-12-09 Jakub Jelinek <jakub@redhat.com> |
| |
| PR libfortran/24991 |
| * acinclude.m4: Include acx.m4 and no-executables.m4. |
| * configure.ac: Add GCC_TOPLEVEL_SUBDIRS. |
| * configure: Rebuilt. |
| * Makefile.am (AM_CPPFLAGS): Use $(host_subdir) in build dir |
| path. |
| * Makefile.in: Rebuilt. |
| |
| 2005-12-08 Jerry DeLisle <jvdelisle@gcc.gnu.org> |
| |
| PR libfortran/25039 |
| * io/io.h: Create a new flag sf_read_comma to control comma |
| separators in numeric reads. |
| * io/transfer.c (formatted_transfer_scalar): Initialize the flag. |
| (read_sf): Check for commas coming in and if the flag is set, |
| shortcut the read. |
| * io/read.c (read_a) (read_x): Clear the flag for character reads and |
| reset it after the reads. |
| |
| 2005-12-04 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * io/format.c: Removing unused code. |
| * intrinsics/random.c: Likewise. |
| |
| 2005-12-02 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/25116 |
| * io/transfer.c (data_transfer_init): Don't set the default for |
| namelist I/O on preconnected files to UNFORMATTED. |
| |
| 2005-11-30 Eric Botcazou <ebotcazou@libertysurf.fr> |
| |
| * libgfortran.h (ILP32 typedefs): Define _UINT8_T, _UINT32_T and |
| _UINT64_T on Solaris. |
| |
| 2005-11-28 Steven G. Kargl <kargls@comcast.net> |
| |
| PR libfortran/25149 |
| * intrinsics/abort.c: Add external abort_ to allow linking when |
| invoking -std=f95 in testsuite. |
| |
| 2005-11-28 Jakub Jelinek <jakub@redhat.com> |
| |
| PR libfortran/24991 |
| * acinclude.m4 (LIBGFOR_CHECK_PRAGMA_WEAK): Rename to... |
| (LIBGFOR_GTHREAD_WEAK): ... this. Define SUPPORTS_WEAK rather |
| than HAVE_PRAGMA_WEAK. Define GTHREAD_USE_WEAK to 0 on hosts |
| that shouldn't use weak in gthr.h. |
| * configure.ac: Use LIBGFOR_GTHREAD_WEAK instead of |
| LIBGFOR_CHECK_PRAGMA_WEAK. |
| * config.h.in: Regenerated. |
| * configure: Regenerated. |
| * io/io.h (SUPPORTS_WEAK): Don't define here. |
| |
| * intrinsics/ftell.c (ftell, FTELL_SUB): Add unlock_unit call. |
| * intrinsics/fget.c (fgetc, fputs): Likewise. |
| * intrinsics/tty.c (ttynam): Likewise. |
| |
| 2005-11-27 Jerry DeLisle <jvdelisle@gcc.gnu.org> |
| |
| PR libfortran/25109 |
| * io/unit.c (init_units): Set default flag to BLANK_NULL per |
| requirement of F95 standard. Set PAD_YES for stdin. |
| |
| 2005-11-27 David Edelsohn <edelsohn@gnu.org> |
| |
| * intrinsics/random.c: Include config.h |
| * io/size_from_kind.c: Include config.h and libgfortran.h |
| * io/io.h: Revert 2005-11-21 change. |
| |
| 2005-11-27 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * io/write.c (namelist_write): Correct type in previous |
| commit. |
| |
| 2005-11-27 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/24919 |
| * io/list_read.c (eat_separator, finish_separator, |
| read_character): Handle CRLF separators correctly during reads. |
| (nml_query): Use the HAVE_CRLF macro to print adequate newlines. |
| * io/io.h (st_parameter_dt): Add comment about the possible |
| values for sf_seen_eor. |
| * io/unix.c (tempfile, regular_file): HAVE_CRLF doesn't imply |
| that O_BINARY is defined, so we add that condition. |
| (stream_at_bof): Fix typo in comment. |
| * io/transfer.c (read_sf): Handle correctly CRLF, setting |
| sf_seen_eor value to 2 instead of 1. |
| (formatted_transfer_scalar): Use the sf_seen_eor value to |
| handle CRLF the right way. |
| * io/write.c (nml_write_obj, namelist_write): Use CRLF as newline |
| when HAVE_CRLF is defined. |
| |
| 2005-11-27 Janne Blomqvist <jb@gcc.gnu.org> |
| |
| * m4/ifunction.m4: Add const restrict to function arguments. |
| * m4/iforeach.m4: Likewise. |
| * m4/eoshift1.m4: Likewise. |
| * m4/eoshift3.m4: Likewise. |
| * m4/dotprod.m4: Likewise. |
| * m4/dotprodc.m4: Likewise. |
| * m4/dotprodl.m4: Likewise. |
| * m4/shape.m4: Likewise. |
| * m4/cshift1.m4: Likewise. |
| * m4/reshape.m4: Likewise. |
| * m4/transpose.m4: Likewise. |
| * generated/eoshift*: Regenerated |
| * generated/dotprod*: Likewise. |
| * generated/shape*: Likewise. |
| * generated/cshift1*: Likewise. |
| * generated/reshape*: Likewise. |
| * generated/transpose*: Likewise. |
| |
| 2005-11-26 Richard Henderson <rth@redhat.com> |
| |
| * io/list_read.c (nml_parse_qualifier): Use ssize_t instead of int |
| in dtp->u.p.value. |
| |
| 2005-11-26 Janne Blomqvist <jb@gcc.gnu.org> |
| |
| PR libfortran/24945 |
| * io/open.c (edit_modes): Check for STATUS_UNKNOWN flag. |
| |
| 2005-11-25 Richard Henderson <rth@redhat.com> |
| |
| * io/list_read.c (nml_parse_qualifier): Use memcpy to extract |
| values from dtp->u.p.value. |
| * io/io.h (struct st_parameter_dt): Change reversion_flag, first_item, |
| seen_dollar, sf_seen_eor, eor_condition, no_leading_blank, char_flag, |
| input_complete, at_eol, comma_flag, namelist_mode, nml_read_error to |
| single-bit fields. Move value to where it'll be at least pointer |
| aligned. |
| |
| 2005-11-23 Alan Modra <amodra@bigpond.net.au> |
| |
| * io/open.c (new_unit): Use the right unit number when checking |
| for stdin, stdout, stderr. |
| |
| 2005-11-22 Jerry DeLisle <jvdelisle@gcc.gnu.org> |
| |
| PR libfortran/24794 |
| * io/list_read.c (read_character): Add auto completion on short |
| namelist reads. |
| |
| 2005-11-21 David Edelsohn <edelsohn@gnu.org> |
| |
| * io/io.h (_LARGE_FILES): Undefine for AIX. |
| (_LARGE_FILE_API): Define for AIX. |
| |
| 2005-11-21 Jakub Jelinek <jakub@redhat.com> |
| |
| PR fortran/24774 |
| PR fortran/14943 |
| PR fortran/21647 |
| * Makefile.am (AM_CPPFLAGS): Add gcc directories as -I paths, |
| add -D_GNU_SOURCE. |
| * Makefile.in: Regenerated. |
| * acinclude.m4 (LIBGFOR_CHECK_SYNC_FETCH_AND_ADD, |
| LIBGFOR_CHECK_GTHR_DEFAULT, LIBGFOR_CHECK_PRAGMA_WEAK): New macros. |
| * configure.ac: Add them. |
| * configure: Rebuilt. |
| * config.h.in: Rebuilt. |
| * libtool-version: Bump libgfortran.so SONAME to libgfortran.so.1. |
| * libgfortran.h (library_start, show_locus, internal_error, |
| generate_error, find_option): Add st_parameter_common * argument. |
| (library_end): Change into a dummy macro. |
| * io/io.h: Include gthr.h. |
| (SUPPORTS_WEAK): Define if HAVE_PRAGMA_WEAK. |
| (CHARACTER): Remove define. |
| (st_parameter, global_t): Remove typedef. |
| (ioparm, g, ionml, current_unit): Remove variables. |
| (init_error_stream): Remove prototype. |
| (CHARACTER1, CHARACTER2): Define. |
| (st_parameter_common, st_parameter_open, st_parameter_close, |
| st_parameter_filepos, st_parameter_inquire, st_parameter_dt): New |
| typedefs. |
| (IOPARM_LIBRETURN_MASK, IOPARM_LIBRETURN_OK, IOPARM_LIBRETURN_ERROR, |
| IOPARM_LIBRETURN_END, IOPARM_LIBRETURN_EOR, IOPARM_ERR, IOPARM_END, |
| IOPARM_EOR, IOPARM_HAS_IOSTAT, IOPARM_HAS_IOMSG, IOPARM_COMMON_MASK, |
| IOPARM_OPEN_HAS_RECL_IN, IOPARM_OPEN_HAS_FILE, IOPARM_OPEN_HAS_STATUS, |
| IOPARM_OPEN_HAS_ACCESS, IOPARM_OPEN_HAS_FORM, IOPARM_OPEN_HAS_BLANK, |
| IOPARM_OPEN_HAS_POSITION, IOPARM_OPEN_HAS_ACTION, |
| IOPARM_OPEN_HAS_DELIM, IOPARM_OPEN_HAS_PAD, IOPARM_CLOSE_HAS_STATUS, |
| IOPARM_INQUIRE_HAS_EXIST, IOPARM_INQUIRE_HAS_OPENED, |
| IOPARM_INQUIRE_HAS_NUMBER, IOPARM_INQUIRE_HAS_NAMED, |
| IOPARM_INQUIRE_HAS_NEXTREC, IOPARM_INQUIRE_HAS_RECL_OUT, |
| IOPARM_INQUIRE_HAS_FILE, IOPARM_INQUIRE_HAS_ACCESS, |
| IOPARM_INQUIRE_HAS_FORM, IOPARM_INQUIRE_HAS_BLANK, |
| IOPARM_INQUIRE_HAS_POSITION, IOPARM_INQUIRE_HAS_ACTION, |
| IOPARM_INQUIRE_HAS_DELIM, IOPARM_INQUIRE_HAS_PAD, |
| IOPARM_INQUIRE_HAS_NAME, IOPARM_INQUIRE_HAS_SEQUENTIAL, |
| IOPARM_INQUIRE_HAS_DIRECT, IOPARM_INQUIRE_HAS_FORMATTED, |
| IOPARM_INQUIRE_HAS_UNFORMATTED, IOPARM_INQUIRE_HAS_READ, |
| IOPARM_INQUIRE_HAS_WRITE, IOPARM_INQUIRE_HAS_READWRITE, |
| IOPARM_DT_LIST_FORMAT, IOPARM_DT_NAMELIST_READ_MODE, |
| IOPARM_DT_HAS_REC, IOPARM_DT_HAS_SIZE, IOPARM_DT_HAS_IOLENGTH, |
| IOPARM_DT_HAS_FORMAT, IOPARM_DT_HAS_ADVANCE, |
| IOPARM_DT_HAS_INTERNAL_UNIT, IOPARM_DT_HAS_NAMELIST_NAME, |
| IOPARM_DT_IONML_SET): Define. |
| (gfc_unit): Add lock, waiting and close fields. Change file |
| from flexible array member into pointer to char. |
| (open_external): Add st_parameter_open * argument. |
| (find_file, file_exists): Add file and file_len arguments. |
| (flush_all_units): New prototype. |
| (max_offset, unit_root, unit_lock): New variable. |
| (is_internal_unit, is_array_io, next_array_record, |
| parse_format, next_format, unget_format, format_error, |
| read_block, write_block, next_record, convert_real, |
| read_a, read_f, read_l, read_x, read_radix, read_decimal, |
| list_formatted_read, finish_list_read, namelist_read, |
| namelist_write, write_a, write_b, write_d, write_e, write_en, |
| write_es, write_f, write_i, write_l, write_o, write_x, write_z, |
| list_formatted_write, get_unit): Add st_parameter_dt * argument. |
| (insert_unit): Remove prototype. |
| (find_or_create_unit, unlock_unit): New prototype. |
| (new_unit): Return gfc_unit *. Add st_parameter_open * |
| and gfc_unit * arguments. |
| (free_fnodes): Remove prototype. |
| (free_format_data): New prototype. |
| (scratch): Remove. |
| (init_at_eol): Remove prototype. |
| (free_ionml): New prototype. |
| (inc_waiting_locked, predec_waiting_locked, dec_waiting_unlocked): |
| New inline functions. |
| * io/unit.c (max_offset, unit_root, unit_lock): New variables. |
| (insert): Adjust os_error caller. |
| (insert_unit): Made static. Allocate memory here, initialize |
| lock and after inserting it return it, locked. |
| (delete_unit): Adjust for deletion of g. |
| (find_unit_1): New function. |
| (find_unit): Use it. |
| (find_or_create_unit): New function. |
| (get_unit): Add dtp argument, change meaning of the int argument |
| as creation request flag. Adjust for different st_* calling |
| conventions, lock internal unit's lock before returning it |
| and removal of g. Call find_unit_1 instead of find_unit. |
| (is_internal_unit, is_array_io): Add dtp argument, adjust for |
| removal of most of global variables. |
| (init_units): Initialize unit_lock. Adjust insert_unit callers |
| and adjust for g removal. |
| (close_unit_1): New function. |
| (close_unit): Use it. |
| (unlock_unit): New function. |
| (close_units): Lock unit_lock, use close_unit_1 rather than |
| close_unit. |
| * io/close.c (st_close): Add clp argument. Adjust for new |
| st_* calling conventions and internal function API changes. |
| * io/file_pos.c (st_backspace, st_endfile, st_rewind, st_flush): |
| Add fpp argument. Adjust for new st_* calling conventions and |
| internal function API changes. |
| (formatted_backspace, unformatted_backspace): Likewise. Add |
| u argument. |
| * io/open.c (edit_modes, st_open): Add opp argument. Adjust for |
| new st_* calling conventions and internal function API changes. |
| (already_open): Likewise. If not HAVE_UNLINK_OPEN_FILE, unlink |
| scratch file. Instead of calling close_unit just call sclose, |
| free u->file if any and clear a few u fields before calling |
| new_unit. |
| (new_unit): Return gfc_unit *. Add opp and u arguments. |
| Adjust for new st_* calling conventions and internal function |
| API changes. Don't allocate unit here, rather than work with |
| already created unit u already locked on entry. In case |
| of failure, close_unit it. |
| * io/unix.c: Include unix.h. |
| (BUFFER_SIZE, unix_stream): Moved to unix.h. |
| (unit_to_fd): Add unlock_unit call. |
| (tempfile): Add opp argument, use its fields rather than ioparm. |
| (regular_file): Likewise. |
| (open_external): Likewise. Only unlink file if fd >= 0. |
| (init_error_stream): Add error argument, set structure it points |
| to rather than filling static variable and returning its address. |
| (FIND_FILE0_DECL, FIND_FILE0_ARGS): Define. |
| (find_file0): Use them. Don't crash if u->s == NULL. |
| (find_file): Add file and file_len arguments, use them instead |
| of ioparm. Add locking. Pass either an array of 2 struct stat |
| or file and file_len pair to find_file0. |
| (flush_all_units_1, flush_all_units): New functions. |
| (file_exists): Add file and file_len arguments, use them instead |
| of ioparm. |
| * io/unix.h: New file. |
| * io/lock.c (ioparm, g, ionml): Remove variables. |
| (library_start): Add cmp argument, adjust for new st_* calling |
| conventions. |
| (library_end): Remove. |
| (free_ionml): New function. |
| * io/inquire.c (inquire_via_unit, inquire_via_filename, |
| st_inquire): Add iqp argument, adjust for new st_* calling |
| conventions and internal function API changes. |
| * io/format.c (FARRAY_SIZE): Decrease to 64. |
| (fnode_array, format_data): New typedefs. |
| (avail, array, format_string, string, error, saved_token, value, |
| format_string_len, reversion_ok, saved_format): Remove variables. |
| (colon_node): Add const. |
| (free_fnode, free_fnodes): Remove. |
| (free_format_data): New function. |
| (next_char, unget_char, get_fnode, format_lex, parse_format_list, |
| format_error, parse_format, revert, unget_format, next_test): Add |
| fmt or dtp arguments, pass it all around, adjust for internal |
| function API changes and adjust for removal of global variables. |
| (next_format): Likewise. Constify return type. |
| (next_format0): Constify return type. |
| * io/transfer.c (current_unit, sf_seen_eor, eor_condition, max_pos, |
| skips, pending_spaces, scratch, line_buffer, advance_status, |
| transfer): Remove variables. |
| (transfer_integer, transfer_real, transfer_logical, |
| transfer_character, transfer_complex, transfer_array, current_mode, |
| read_sf, read_block, read_block_direct, write_block, |
| write_block_direct, unformatted_read, unformatted_write, |
| type_name, write_constant_string, require_type, |
| formatted_transfer_scalar, us_read, us_write, pre_position, |
| data_transfer_init, next_record_r, next_record_w, next_record, |
| finalize_transfer, iolength_transfer, iolength_transfer_init, |
| st_iolength, st_iolength_done, st_read, st_read_done, st_write, |
| st_write_done, st_set_nml_var, st_set_nml_var_dim, |
| next_array_record): Add dtp argument, pass it all around, adjust for |
| internal function API changes and removal of global variables. |
| * io/list_read.c (repeat_count, saved_length, saved_used, |
| input_complete, at_eol, comma_flag, last_char, saved_string, |
| saved_type, namelist_mode, nml_read_error, value, parse_err_msg, |
| nml_err_msg, prev_nl): Remove variables. |
| (push_char, free_saved, next_char, unget_char, eat_spaces, |
| eat_separator, finish_separator, nml_bad_return, convert_integer, |
| parse_repeat, read_logical, read_integer, read_character, |
| parse_real, read_complex, read_real, check_type, |
| list_formatted_read_scalar, list_formatted_read, finish_list_read, |
| find_nml_node, nml_untouch_nodes, nml_match_name, nml_query, |
| namelist_read): Add dtp argument, pass it all around, adjust for |
| internal function API changes and removal of global variables. |
| (nml_parse_qualifier): Likewise. Add parse_err_msg argument. |
| (nml_read_obj): Likewise. Add pprev_nl, nml_err_msg, clow and |
| chigh arguments. |
| (nml_get_obj_data): Likewise. Add pprev_nl and nml_err_msg |
| arguments. |
| (init_at_eol): Removed. |
| * io/read.c (convert_real, read_l, read_a, next_char, read_decimal, |
| read_radix, read_f, read_x): Add dtp argument, pass it all around, |
| adjust for internal function API changes and removal of global |
| variables. |
| (set_integer): Adjust internal_error caller. |
| * io/write.c (no_leading_blank, nml_delim): Remove variables. |
| (write_a, calculate_sign, calculate_G_format, output_float, |
| write_l, write_float, write_int, write_decimal, write_i, write_b, |
| write_o, write_z, write_d, write_e, write_f, write_en, write_es, |
| write_x, write_char, write_logical, write_integer, write_character, |
| write_real, write_complex, write_separator, |
| list_formatted_write_scalar, list_formatted_write, nml_write_obj, |
| namelist_write): Add dtp argument, pass it all around, adjust for |
| internal function API changes and removal of global variables. |
| (extract_int, extract_uint, extract_real): Adjust internal_error |
| callers. |
| * runtime/fpu.c (_GNU_SOURCE): Don't define here. |
| * runtime/error.c: Include ../io/unix.h. |
| (filename, line): Remove variables. |
| (st_printf): Pass address of a local variable to init_error_stream. |
| (show_locus): Add cmp argument. Use fields it points to rather than |
| filename and line variables. |
| (os_error, runtime_error): Remove show_locus calls. |
| (internal_error): Add cmp argument. Pass it down to show_locus. |
| (generate_error): Likewise. Use flags bitmask instead of non-NULL |
| check for iostat and iomsg parameter presence, adjust for st_* |
| calling convention changes. |
| * runtime/stop.c (stop_numeric, stop_string): Remove show_locus |
| calls. |
| * runtime/pause.c (pause_numeric, pause_string): Likewise. |
| * runtime/string.c: Include ../io/io.h. |
| (find_option): Add cmp argument. Pass it down to generate_error. |
| * intrinsics/flush.c (recursive_flush): Remove. |
| (flush_i4, flush_i8): Use flush_all_units. Add unlock_unit |
| call. |
| * intrinsics/rand.c: Include ../io/io.h. |
| (rand_seed_lock): New variable. |
| (srand, irand): Add locking. |
| (init): New constructor function. |
| * intrinsics/random.c: Include ../io/io.h. |
| (random_lock): New variable. |
| (random_r4, random_r8, arandom_r4, arandom_r8): Add locking. |
| (random_seed): Likewise. open failed if fd < 0. Set i correctly. |
| (init): New constructor function. |
| * intrinsics/system_clock.c (tp0, t0): Remove. |
| (system_clock_4, system_clock_8): Don't subtract tp0/t0 from current |
| time, use just integer arithmetics. |
| * intrinsics/tty.c (isatty_l4, isatty_l8, ttynam_sub): Add |
| unlock_unit calls. |
| |
| 2005-11-20 Richard Henderson <rth@redhat.com> |
| |
| * Makefile.am: Revert 2005-11-14 change. Enable -free-vectorize |
| via gmake per-target variables. |
| * Makefile.in, aclocal.m4: Regenerate. |
| |
| 2005-11-18 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * configure.ac: Add "-I ." to the AM_FCFLAGS. |
| * configure: Regenerate. |
| |
| 2005-11-18 Hans-Peter Nilsson <hp@axis.com> |
| |
| * config/fpu-glibc.h (set_fpu): Only call fedisableexcept for |
| nonzero FE_ALL_EXCEPT. |
| |
| 2005-11-17 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR fortran/24892 |
| * io/io.h (unit_access): Add ACCESS_APPEND. |
| * io/open.c (access_opt): Add APPEND value for ACCESS keyword. |
| (st_open): Use that new value to set the POSITION accordingly. |
| |
| 2005-11-14 Janne Blomqvist <jb@gcc.gnu.org> |
| |
| PR fortran/21468 |
| * Makefile.am: Add -ftree-vectorize for compiling matmul. |
| * m4/matmul.m4: Add const and restrict to type declarations as |
| appropriate. |
| * m4/matmull.m4: Likewise. |
| * Makefile.in: Regenerated. |
| * generated/matmul_*.c: Likewise. |
| |
| 2005-11-13 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * intrinsics/fget.c: New file. |
| * intrinsics/ftell.c: New file. |
| * io/unix.c (stream_offset): New function. |
| * io/io.h: Add prototype for stream_offset. |
| * Makefile.am: Add intrinsics/fget.c and intrinsics/ftell.c. |
| * Makefile.in: Regenerate. |
| |
| 2005-11-12 Steven G. Kargl <kargls@comcast.net> |
| |
| PR libfortran/24787 |
| * intrinsics/string_intrinsics.c (string_scan): Off by one; Fix typos |
| in nearby comment. |
| |
| 2005-11-10 Andreas Jaeger <aj@suse.de> |
| |
| * libgfortran.h: Add proper defines where needed. |
| |
| 2005-11-10 Andreas Jaeger <aj@suse.de> |
| |
| * libgfortran.h: Add missing prototypes for internal_pack |
| functions. |
| |
| 2005-11-06 Janne Blomqvist <jb@gcc.gnu.org> |
| |
| PR fortran/24174 |
| PR fortran/24305 |
| * io/io.h: Add argument to prototypes, add prototypes for |
| size_from_*_kind functions. |
| * io/list_read.c (read_complex): Add size argument, use |
| it. |
| (list_formatted_read): Add size argument, cleanup. |
| (list_formatted_read_scalar): Add size argument. |
| (nml_read_obj): Fix for padding. |
| * io/transfer.c: Add argument to transfer function pointer. |
| (unformatted_read): Add size argument. |
| (unformatted_write): Likewise. |
| (formatted_transfer_scalar): Fix for padding with complex(10). |
| (formatted_transfer): Add size argument, cleanup. |
| (transfer_integer): Add size argument to transfer call. |
| (transfer_real): Likewise. |
| (transfer_logical): Likewise. |
| (transfer_character): Likewise. |
| (transfer_complex): Likewise. |
| (transfer_array): New kind argument, use it. |
| (data_transfer_init): Add size argument to formatted_transfer |
| call. |
| (iolength_transfer): Add size argument, cleanup. |
| * io/write.c (write_complex): Add size argument, fix for padding |
| with complex(10). |
| (list_formatted_write): Add size argument, cleanup. |
| (list_formatted_write_scalar): Add size argument, use it. |
| (nml_write_obj): Fix for size vs. kind issue. |
| * io/size_from_kind.c: New file. |
| * Makefile.am: Add io/size_from_kind.c. |
| * configure: Regenerate. |
| * Makefile.in: Regenerate. |
| |
| 2005-11-06 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * intrinsics/ctime.c: New file. |
| * configure.ac: Add check for ctime. |
| * Makefile.am: Add ctime.c |
| * configure: Regenerate. |
| * config.h.in: Regenerate. |
| * Makefile.in: Regenerate. |
| |
| 2005-11-05 Richard Guenther <rguenther@suse.de> |
| |
| * configure.ac: Use AM_FCFLAGS for extra flags, not FCFLAGS. |
| * configure: Regenerate. |
| |
| 2005-11-05 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * intrinsics/tty.c (ttynam): New function. |
| |
| 2005-11-04 Steven G. Kargl <kargls@comcast.net> |
| |
| PR fortran/24636 |
| * runtime/stop.c (stop_numeric): Use stop_code = -1. |
| |
| 2005-11-04 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/22298 |
| * runtime/main.c (stupid_function_name_for_static_linking): New |
| function. |
| * runtime/error.c (internal_error): Call |
| stupid_function_name_for_static_linking. |
| * libgfortran.h: Add prototype for |
| stupid_function_name_for_static_linking. |
| |
| 2005-11-01 Paul Thomas <pault@gcc.gnu.org> |
| |
| PR fortran/14994 |
| * libgfortran/intrinsics/date_and_time.c: Add interface to |
| the functions date_and_time for the intrinsic function secnds. |
| |
| 2005-10-31 Jerry DeLisle <jvdelisle@verizon.net> |
| |
| PR libfortran/24584 |
| * io/list_read.c (free_saved): Set saved_used to zero. |
| |
| 2005-10-30 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/20179 |
| * io/unix.c (flush_if_preconnected): New function. |
| * io/io.h: Add prototype for flush_if_preconnected. |
| * io/transfer.c (data_transfer_init): Use flush_if_preconnected |
| to workaround buggy mixed C-Fortran code. |
| |
| 2005-10-30 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * Makefile.am: Add intrinsics/malloc.c file. |
| * Makefile.in: Regenerate. |
| * intrinsics/malloc.c: New file, with implementations for free |
| and malloc library functions. |
| |
| 2005-10-29 Mike Stump <mrs@apple.com> |
| |
| * Makefile.am (kinds.h): Remove target, if command fails. |
| (selected_int_kind.inc): Likewise. |
| (selected_real_kind.inc): Likewise. |
| * Makefile.in: Regenerate. |
| |
| 2005-10-28 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| |
| * Makefile.am (intrinsics): Add signal.c. |
| * Makefile.in: Regenerate. |
| * configure.ac: Checks for signal and alarm. |
| * config.h.in: Regenerate. |
| * configure: Regenerate. |
| * intrinsics/signal.c: New file for SIGNAL and ALARM intrinsics. |
| |
| 2005-10-28 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * acinclude.m4 (LIBGFOR_CHECK_FPSETMASK): New check. |
| * configure.ac: Check for floatingpoint.h, fptrap.h and float.h |
| headers. Use LIBGFOR_CHECK_FPSETMASK. Check for fp_trap and |
| fp_enable functions. |
| * configure.host: Add case for systems with fpsetmask and systems |
| with fp_trap/fp_enable. |
| * config/fpu-sysv.h: New file, FPU code using fpsetmask. |
| * config/fpu-aix.h: New file, FPU code for AIX using fp_trap and |
| fp_enable. |
| * aclocal.m4: Regenerate. |
| * configure: Regenerate. |
| * config.h.in: Regenerate. |
| |
| 2005-10-24 Jerry DeLisle <jvdelisle@verizon.net> |
| |
| PR libfortran/24224 |
| * libgfortran.h: Remove array stride error code. |
| * runtime/error.c: Remove array stride error. |
| * io/io.h: Change name of 'nml_loop_spec' to 'array_loop_spec' to be |
| generic. Add pointer to array_loop_spec and rank to gfc_unit |
| structure. |
| * io/list_read.c: Revise nml_loop_spec references to array_loop_spec. |
| * io/transfer.c (init_loop_spec): New function to initialize |
| an array_loop_spec. |
| (next_array_record): New function to return the index to the next array |
| record by incrementing through the array_loop_spec. |
| (next_record_r): Use new function. |
| (next_record_w): Use new function. |
| (finalize_transfer): Free memory allocated for array_loop_spec. |
| * io/unit.c (get_array_unit_len): Delete this function. Use new |
| function init_loop_spec to initialize the array_loop_spec. |
| |
| 2005-10-24 Paul Thomas <pault@gcc.gnu.org> |
| |
| PR fortran/24416 |
| * libgfortran/io/list_read.c (namelist_read): Exit with call to |
| free_saved () so that character strings do not accumulate. |
| |
| 2005-10-23 Jerry DeLisle <jvdelisle@verizon.net> |
| |
| PR libfortran/24489 |
| * io/transfer.c (read_block): Change the order of execution to not read |
| past end-of-record. |
| (read_block_direct): Same change. |
| |
| 2005-10-23 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/23272 |
| * acinclude.m4 (LIBGFOR_CHECK_WORKING_STAT): New check. |
| * configure.ac: Use LIBGFOR_CHECK_WORKING_STAT. |
| * Makefile.in: Regenerate. |
| * configure: Regenerate. |
| * config.h.in: Regenerate. |
| * aclocal.m4: Regenerate. |
| * io/unix.c (compare_file_filename): Add fallback case for |
| systems without working stat. |
| * io/open.c (already_open): Correct call to |
| compare_file_filename. |
| * io/io.h: Correct proto for compare_file_filename. |
| |
| 2005-10-23 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * runtime/fpu.c: Add _GNU_SOURCE definition. |
| * config/fpu-glibc.h: Remove __USE_GNU definition. |
| |
| 2005-10-23 Paul Thomas <pault@gcc.gnu.org> |
| |
| PR fortran/24384 |
| * intrinsics/spread_generic.c (spread_internal_scalar): New |
| function that handles the special case of spread with a scalar |
| source. This has new interface functions - |
| (spread_scalar, spread_char_scalar): New functions to interface |
| with the calls specified in gfc_resolve_spread. |
| |
| 2005-10-21 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/24383 |
| * io/unix.c: Add fallback definition for SSIZE_MAX. |
| |
| 2005-10-19 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * c99_protos.h: Define preprocessor HAVE_ macros with value 1 |
| instead of empty value. |
| * intrinsics/c99_functions.c: Likewise. |
| * intrinsics/getXid.c: Define HAVE_GETPID with value 1 instead of |
| empty value. |
| * intrinsics/sleep.c: Define HAVE_SLEEP with value 1 instead of |
| empty value. |
| |
| 2005-10-19 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/24432 |
| * c99_protos.h: Define HAVE_ macros for all provided functions. |
| |
| 2005-10-14 Uros Bizjak <uros@kss-loka.si> |
| |
| * config/fpu-387.h (set_fpu): Remove extra ":" in stmxcsr. |
| Change cw and cw_sse variables to unsigned. |
| (SSE): New definition. |
| (has_sse): Use it. |
| |
| 2005-10-13 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| * io/unix.c(fd_alloc_r_at): Use read() instead of do_read() |
| only in case of special files (e.g. terminals). |
| |
| 2005-10-13 Uros Bizjak <uros@kss-loka.si> |
| |
| * config/fpu-387.h (set_fpu): Add "=m" for stmxcsr. |
| |
| 2005-10-12 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * Makefile.am: Add fpu.c to the build process, and |
| target-dependent code as fpu-target.h. |
| * Makefile.in: Regenerate. |
| * configure.ac: Add call to configure.host to set |
| FPU_HOST_HEADER. |
| * configure: Regenerate. |
| * configure.host: New script to determine which host-dependent |
| code should go in. |
| * libgfortran.h: Add fpe option, remove previous fpu_ options. |
| Add bitmasks for different FPE traps. Add prototype for set_fpu. |
| * runtime/environ.c: Remove environment variables to control |
| fpu behaviour. |
| * runtime/fpu.c (set_fpe): New function for the front-end. |
| * runtime/main.c (init): Set FPU state. |
| * config: New directory to store host-dependent code. |
| * config/fpu-387.h: New file with code handling the i387 FPU. |
| * config/fpu-glibc.h: New file with code for glibc systems. |
| * config/fpu-generic.h: Fallback for the most generic host. Issue |
| warnings. |
| |
| 2005-10-12 Janne Blomqvist <jblomqvi@cc.hut.fi> |
| |
| * io/unix.c(fd_alloc_r_at): Remove parts of patch of 2005/10/07 that |
| cause input from the terminal to hang. |
| |
| 2005-10-11 Steven G. Kargl <kargls@comcast.net> |
| |
| PR libfortran/24313 |
| * c99_functions.c (csqrtf, csqrt): Fix choice of branch cut. Note |
| csqrt{f} were imported from glibc, and this bug is still present |
| there. glibc PR is 1146. |
| |
| 2005-10-07 Janne Blomqvist <jblomqvi@cc.hut.fi> |
| |
| PR fortran/16339 |
| PR fortran/23363 |
| * io/io.h: Add read and write members to stream, define access |
| macros. |
| * io/transfer.c (read_block_direct): New function. |
| (write_block_direct): New function. |
| (unformatted_read): Change to use read_block_direct. |
| (unformatted_write): Change to use write_block_direct. |
| * io/unix.c: Remove mmap includes and defines. |
| (writen): Remove. |
| (readn): Remove. |
| (reset_stream): New function. |
| (do_read): New function. |
| (do_write): New function. |
| (fd_flush): Change to use do_write() instead of writen(). |
| (fd_alloc_r_at): Change to use do_read(). |
| (fd_seek): Change return type to try, as the prototype. Add check |
| to avoid syscall overhead if possible. |
| (fd_read): New function. |
| (fd_write): New function. |
| (fd_open): Set pointers for new functions. |
| (mem_read): New function. |
| (mem_write): New function. |
| (open_internal): Set pointers for new functions. |
| (is_seekable): Clean up comment. |
| |
| 2005-10-07 Jerry DeLisle <jvdelisle@verizon.net> |
| |
| * io/transfer.c (write_block): Add test for end-of-file condition, |
| removed from mem_alloc_w_at. (next_record_w): Clean up checks for |
| NULL pointer returns from s_alloc_w. |
| * io/unix.c (mem_alloc_w_at): Remove call to generate_error end-of-file. |
| * io/write.c (write_float): Add checks for NULL pointer returns from |
| write_block calls. (write_integer): Same. |
| |
| 2005-10-03 Jakub Jelinek <jakub@redhat.com> |
| |
| * runtime/memory.c (allocate_size): Malloc 1 byte if size == 0. |
| |
| 2005-10-03 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/19308 |
| PR libfortran/22437 |
| * Makefile.am: Add generated files for large real and integers |
| kinds. Add a rule to create the kinds.inc c99_protos.inc files. |
| Use kinds.inc to preprocess Fortran generated files. |
| * libgfortran.h: Add macro definitions for GFC_INTEGER_16_HUGE, |
| GFC_REAL_10_HUGE and GFC_REAL_16_HUGE. Add types gfc_array_i16, |
| gfc_array_r10, gfc_array_r16, gfc_array_c10, gfc_array_c16, |
| gfc_array_l16. |
| * mk-kinds-h.sh: Define macros HAVE_GFC_LOGICAL_* and |
| HAVE_GFC_COMPLEX_* when these types are available. |
| * intrinsics/ishftc.c (ishftc16): New function for GFC_INTEGER_16. |
| * m4/all.m4, m4/any.m4, m4/count.m4, m4/cshift1.m4, m4/dotprod.m4, |
| m4/dotprodc.m4, m4/dotprodl.m4, m4/eoshift1.m4, m4/eoshift3.m4, |
| m4/exponent.m4, m4/fraction.m4, m4/in_pack.m4, m4/in_unpack.m4, |
| m4/matmul.m4, m4/matmull.m4, m4/maxloc0.m4, m4/maxloc1.m4, |
| m4/maxval.m4, m4/minloc0.m4, m4/minloc1.m4, m4/minval.m4, m4/mtype.m4, |
| m4/nearest.m4, m4/pow.m4, m4/product.m4, m4/reshape.m4, |
| m4/set_exponent.m4, m4/shape.m4, m4/specific.m4, m4/specific2.m4, |
| m4/sum.m4, m4/transpose.m4: Protect generated functions with |
| appropriate "#if defined (HAVE_GFC_type_kind)" preprocessor directives. |
| * Makefile.in: Regenerate. |
| * all files in generated/: Regenerate. |
| |
| 2005-10-01 Jakub Jelinek <jakub@redhat.com> |
| |
| * runtime/memory.c (malloc_t): Remove. |
| (GFC_MALLOC_MAGIC, HEADER_SIZE, DATA_POINTER, DATA_HEADER): Remove. |
| (mem_root, runtime_cleanup, malloc_with_header): Remove. |
| (internal_malloc_size): Use just get_mem if size != 0, return NULL |
| otherwise. |
| (internal_free): Just free if non-NULL. |
| (internal_realloc_size): Remove debugging stuff. |
| (allocate_size): Use malloc directly, remove debugging stuff. |
| (deallocate): Use free directly, fix error message wording. |
| |
| * libgfortran.h (GFC_ITOA_BUF_SIZE, GFC_XTOA_BUF_SIZE, |
| GFC_OTOA_BUF_SIZE, GFC_BTOA_BUF_SIZE): Define. |
| (gfc_itoa, xtoa): Add 2 extra arguments. |
| * runtime/environ.c: Include stdio.h. |
| (check_buffered): Use sprintf. |
| * runtime/error.c: Include assert.h. |
| (gfc_itoa, xtoa): Add 2 extra arguments, avoid using static |
| buffers. |
| (st_printf, st_sprintf): Adjust callers. |
| * io/write.c (otoa, btoa): Add 2 extra arguments, avoid using |
| static buffers. |
| (write_int, write_decimal): Add 2 extra arguments to conv |
| function pointer, adjust caller. |
| (write_integer): Adjust gfc_itoa caller. |
| |
| * io/unit.c (get_array_unit_len): Return 0 rather than NULL. |
| |
| * io/read.c (read_f): Remove spurious pointer dereference. |
| |
| 2005-09-30 Janne Blomqvist <jblomqvi@cc.hut.fi> |
| |
| PR 24112 |
| * io/open.c (edit_modes): Check for correct flag. |
| |
| 2005-09-29 Jakub Jelinek <jakub@redhat.com> |
| |
| * runtime/string.c (find_option): Change 3rd argument to |
| const st_option *. |
| * libgfortran.h (find_option): Likewise. |
| * runtime/environ.c (rounding, precision, signal_choices): Constify. |
| (init_choice, show_choice): Change 2nd argument to const choice *. |
| * io/open.c (access_opt, action_opt, blank_opt, delim_opt, form_opt, |
| position_opt, status_opt, pad_opt): Constify. |
| * io/transfer.c (advance_opt): Likewise. |
| * io/inquire.c (undefined): Likewise. |
| * io/close.c (status_opt): Likewise. |
| * io/format.c (posint_required, period_required, nonneg_required, |
| unexpected_element, unexpected_end, bad_string, bad_hollerith, |
| reversion_error): Likewise. |
| * io/unix.c (yes, no, unknown): Change from const char * |
| into const char []. |
| |
| 2005-09-27 Steve Ellcey <sje@cup.hp.com> |
| |
| PR target/23552 |
| * acinclude.m4 (LIBGFOR_CHECK_FOR_BROKEN_ISFINITE): New. |
| (LIBGFOR_CHECK_FOR_BROKEN_ISNAN): New. |
| (LIBGFOR_CHECK_FOR_BROKEN_FPCLASSIFY): New. |
| * configure.ac (LIBGFOR_CHECK_FOR_BROKEN_ISFINITE): Add use. |
| (LIBGFOR_CHECK_FOR_BROKEN_ISNAN): Add use. |
| (LIBGFOR_CHECK_FOR_BROKEN_FPCLASSIFY): Add use. |
| * configure: Regenerate. |
| * config.h.in: Regenerate. |
| * libgfortan.h (isfinite): undef if broken, set if needed. |
| (isnan): undef if broken, set if needed. |
| (fpclassify): undef if broken, set if needed. |
| * io/write.c: Remove TODO comment about working isfinite. |
| * intrinsics/c99_functions.c (round): Use isfinite instead |
| of fpclassify. |
| * intrinsics/c99_functions.c (roundf): Ditto. |
| |
| 2005-09-24 Janne Blomqvist <jblomqvi@cc.hut.fi> |
| |
| * io.h: Changed prototypes of list_formatted_{read|write}. |
| * list_read.c (list_formatted_read): Renamed to |
| list_formatted_read_scalar and made static. |
| (list_formatted_read): New function. |
| * transfer.c: Prototype for transfer_array. Changed transfer |
| function pointer. |
| (unformatted_read): Add nelems argument, use it. |
| (unformatted_write): Likewise. |
| (formatted_transfer): Changed name to formatted_transfer_scalar. |
| (formatted_transfer): New function. |
| (transfer_integer): Add nelems argument to transfer call, move |
| updating item count to transfer functions. |
| (transfer_real): Likewise. |
| (transfer_logical): Likewise. |
| (transfer_character): Likewise. |
| (transfer_complex): Likewise. |
| (transfer_array): New function. |
| (data_transfer_init): Call formatted_transfer with new argument. |
| (iolength_transfer): New argument, use it. |
| * write.c (list_formatted_write): Renamed to |
| list_formatted_write_scalar, made static. |
| (list_formatted_write): New function. |
| |
| 2005-09-26 David Edelsohn <edelsohn@gnu.org> |
| |
| * configure.ac: Add check for __clog. |
| * configure: Regenerate. |
| |
| 2005-09-25 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * c99_protos.h: Add prototypes for C99 complex functions. |
| * libgfortran.h: Include complex.h before c99_protos.h. |
| * intrinsics/c99_functions.c: Define HAVE_ macros for the |
| fallback functions we provide. |
| (cabsf, cabs, cabsl, cargf, carg, cargl, cexpf, cexp, cexpl, |
| clogf, clog, clogl, clog10f, clog10, clog10l, cpowf, cpow, cpowl, |
| cqsrtf, csqrt, csqrtl, csinhf, csinh, csinhl, ccoshf, ccosh, |
| ccoshl, ctanhf, ctanh, ctanhl, csinf, csin, csinl, ccosf, ccos, |
| ccosl, ctanf, ctan, ctanl): New fallback functions. |
| * Makefile.am (gfor_math_trig_c, gfor_math_trig_obj, |
| gfor_specific_c, gfor_cmath_src, gfor_cmath_obj): Remove. |
| * Makefile.in: Regenerate. |
| * configure.ac: Remove checks for csin. Add checks for all C99 |
| complex functions. |
| * config.h.in: Regenerate. |
| * configure: Regenerate. |
| * aclocal.m4: Regenerate. |
| |
| 2005-09-25 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| Danny Smith <dannysmith@users.sourceforge.net> |
| |
| PR libfortran/23803 |
| * intrinsics/getXid.c: Add getpid wrapper for MinGW. |
| * intrinsics/getlog.c: Add getlogin wrapper for MinGW. |
| * intrinsics/hostnm.c: Add gethostname wrapper for MinGW. |
| |
| 2005-09-24 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/23802 |
| * intrinsics/sleep.c: Add correct sleep macro for MinGW. |
| |
| 2005-09-24 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/23380 |
| * intrinsics/cpu_time.c (__cpu_time_1): Provide a MS Windows |
| version. |
| |
| 2005-09-14 Jerry DeLisle <jvdelisle@verizon.net |
| |
| PR fortran/21875 Internal Unit Array I/O, NIST |
| * libgfortran.h: Add run time error code for array stride. |
| * runtime/error.c (translate_error): Add error message for |
| array stride. |
| * io/io.h: Add array descriptor pointer to IOPARM structure. |
| Add prtotypes for two new functions. |
| * io/transfer.c (data_transfer_init): Removed initialization and |
| moved to unit.c (get_unit) |
| * io/transfer.c (next_record_r): Include internal unit read |
| functionality. |
| * io/transfer.c (next_record_w): Include internal unit write |
| functionality, including padding of character array records. |
| * io/unit.c (get_array_unit_len): New function to return the number |
| of records in the character array 'file' from the array descriptor. |
| * io/unit.c (get_unit): Gathered initialization code from |
| init_data_transfer for internal units and added initialization of |
| character array unit. |
| * io/unit.c (is_array_io): New function to determine if internal unit |
| is an array. |
| * io/unix.c (mem_alloc_w_at): Add error checks for bad record length |
| and end of file. |
| |
| 2005-09-13 Richard Sandiford <richard@codesourcery.com> |
| |
| PR target/19269 |
| * intrinsics/cshift0.c (cshift0): Add an extra size argument. |
| (cshift0_1, cshift0_2, cshift0_4, cshift0_8): Replace explicit |
| implementations with... |
| (DEFINE_CSHIFT): ...this new macro. Define character versions too. |
| * intrinsics/eoshift0.c (zeros): Delete. |
| (eoshift0): Add extra size and filler arguments. Use memset if no |
| bound is provided. |
| (eoshift0_1, eoshift0_2, eoshift0_4, eoshift0_8): Replace explicit |
| implementations with... |
| (DEFINE_EOSHIFT): ...this new macro. Define character versions too. |
| * intrinsics/eoshift2.c (zeros): Delete. |
| (eoshift2): Add extra size and filler arguments. Use memset if no |
| bound is provided. |
| (eoshift2_1, eoshift2_2, eoshift2_4, eoshift2_8): Replace explicit |
| implementations with... |
| (DEFINE_EOSHIFT): ...this new macro. Define character versions too. |
| * intrinsics/pack.c (pack_internal): New static function, reusing |
| the contents of pack and adding an extra size argument. Change |
| "mptr" rather than "m" when calculating the array size. |
| (pack): Redefine as a forwarder to pack_internal. |
| (pack_s_internal): New static function, reusing the contents of |
| pack_s and adding an extra size argument. |
| (pack_s): Redefine as a forwarder to pack_s_internal. |
| (pack_char, pack_s_char): New functions. |
| * intrinsics/reshape.c (reshape_internal): New static function, |
| reusing the contents of reshape and adding an extra size argument. |
| (reshape): Redefine as a forwarder to reshape_internal. |
| (reshape_char): New function. |
| * intrinsics/spread.c (spread_internal): New static function, |
| reusing the contents of spread and adding an extra size argument. |
| (spread): Redefine as a forwarder to spread_internal. |
| (spread_char): New function. |
| * intrinsics/transpose.c (transpose_internal): New static function, |
| reusing the contents of transpose and adding an extra size argument. |
| (transpose): Redefine as a forwarder to transpose_internal. |
| (transpose_char): New function. |
| * intrinsics/unpack.c (unpack_internal): New static function, reusing |
| the contents of unpack1 and adding extra size and fsize arguments. |
| (unpack1): Redefine as a forwarder to unpack_internal. |
| (unpack0): Call unpack_internal instead of unpack1. |
| (unpack1_char, unpack0_char): New functions. |
| * m4/cshift1.m4 (cshift1): New static function, reusing the contents |
| of cshift1_<kind> and adding an extra size argument. |
| (cshift1_<kind>): Redefine as a forwarder to cshift1. |
| (cshift1_<kind>_char): New function. |
| * m4/eoshift1.m4 (zeros): Delete. |
| (eoshift1): New static function, reusing the contents of |
| eoshift1_<kind> and adding extra size and filler arguments. |
| Fix calculation of hstride. Use memset if no bound is provided. |
| (eoshift1_<kind>): Redefine as a forwarder to eoshift1. |
| (eoshift1_<kind>_char): New function. |
| * m4/eoshift3.m4 (zeros): Delete. |
| (eoshift3): New static function, reusing the contents of |
| eoshift3_<kind> and adding extra size and filler arguments. |
| Use memset if no bound is provided. |
| (eoshift3_<kind>): Redefine as a forwarder to eoshift3. |
| (eoshift3_<kind>_char): New function. |
| * generated/cshift1_4.c, generated/cshift1_8.c, |
| * generated/eoshift1_4.c, generated/eoshift1_8.c, |
| * generated/eoshift3_4.c, generated/eoshift3_8.c: Regenerate. |
| |
| 2005-09-11 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/20179 |
| * io/unix.c (is_preconnected): Add function to test if a stream |
| corresponds to a preconnected unit. |
| * io/io.h: Add prototype for is_preconnected. |
| * io/transfer.c (data_transfer_init): Do not truncate |
| preconnected units. |
| |
| 2005-09-10 Janne Blomqvist <jblomqvi@cc.hut.fi> |
| |
| * io/unix.c: Remove mmap code. |
| |
| 2005-09-09 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/23784 |
| * io/close.c (st_close): Call library_end even in case of error. |
| |
| 2005-09-09 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| * io/io.h: Add iomsg as last field of st_parameter. |
| * runtime/error.c (generate_error): If iomsg is present, copy |
| the message there. |
| |
| 2005-09-09 Richard Sandiford <richard@codesourcery.com> |
| |
| PR fortran/12840 |
| * runtime/memory.c (internal_malloc_size): Return a null pointer |
| if the size is zero. |
| (internal_free): Do nothing if the pointer is null. |
| (internal_realloc_size, internal_realloc, internal_realloc64): New. |
| |
| 2005-09-07 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/23262 |
| * acinclude.m4 (LIBGFOR_CHECK_CRLF): New check. |
| * configure.ac: Use new check. |
| * configure.in: Regenerate. |
| * config.h.in: Regenerate. |
| * configure: Regenerate. |
| * io/transfer.c (next_record_w): Add case for CRLF as line |
| terminator. |
| * io/unix.c (tempfile, regular_file): Open files with |
| O_BINARY on systems with CRLF. |
| |
| 2005-09-07 Steve Ellcey <sje@cup.hp.com> |
| |
| PR libfortran/23419 |
| * io/write.c (extract_int): Use memcpy to access buffer. |
| (extract_uint): Ditto. |
| (extract_real): Ditto. |
| |
| 2005-09-05 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| * io/list_read.c: Adjust size of of value to 32 (to hold |
| kind=16 complex values). |
| |
| 2005-09-04 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/23321 |
| * io/transfer.c(data_transfer_init): Check for a too-large |
| record number. Return if sseek failed. |
| |
| 2005-09-03 Jakub Jelinek <jakub@redhat.com> |
| |
| * io/read.c (read_x): Take int argument instead of fnode * and |
| digging the N from F->u.n. |
| * io/io.h (read_x): Adjust prototype. |
| * io/transfer.c (formatted_transfer): Adjust callers. Don't clobber |
| f->u.n for FMT_T. |
| |
| 2005-09-02 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * io/unix.c (stream_ttyname): Protect use of ttyname by |
| HAVE_TTYNAME macro. |
| * configure.ac: Add check for ttyname. |
| * config.h.in: Regenerate. |
| * configure: Regenerate. |
| |
| 2005-09-02 Andreas Jaeger <aj@suse.de> |
| |
| * libgfortran.h: Add prototype for init_compile_options. |
| |
| * io/io.h: Add prototype for notify_std. |
| |
| 2005-08-31 Steve Ellcey <sje@cup.hp.com> |
| |
| * io/read.c (set_integer): Use memcpy to fill buffer. |
| |
| 2005-08-31 Steve Ellcey <sje@cup.hp.com> |
| |
| PR target/23556 |
| * io/read.c (convert_real): Use memcpy to fill buffer. |
| |
| 2005-08-29 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/23598 |
| * io/lock.c(library_start): If ioparm.iostat is present, clear |
| it unconditionally. |
| |
| 2005-08-27 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * acinclude.m4 (LIBGFOR_CHECK_UNLINK_OPEN_FILE): Add check to see |
| if target can unlink open files. |
| * configure.ac: Use this new test. |
| * config.h.in: Regenerate. |
| * configure: Regenerate. |
| * Makefile.in: Regenerate. |
| * aclocal.ac: Regenerate. |
| * io/io.h: Add prototype for unpack_filename. |
| * io/close.c (st_close): Delete file after closing unit if |
| HAVE_UNLINK_OPEN_FILE is not defined. |
| * io/unix.c (unpack_filename): Unlink scratch file after opening |
| it only if HAVE_UNLINK_OPEN_FILE is defined. |
| |
| 2005-08-17 Kelley Cook <kcook@gcc.gnu.org> |
| |
| * All files: Update FSF address. |
| |
| 2005-08-16 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/23428 |
| * io/transfer.c (iolength_transfer): Remove __attribute__ ((unused)) |
| from type. Return correct length for inquire(iolength=) |
| for complex variables. |
| |
| 2005-08-11 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| Steven Bosscher <stevenb@suse.de> |
| |
| PR libfortran/20006 |
| * Makefile.am: Add file runtime/compile_options.c. |
| * Makefile.in: Regenerate. |
| * libgfortran.h: Create structure compile_options_t. Define the |
| compile_options variable and GFC_STD_ macros. |
| * runtime/compile_options.c: New file. |
| * runtime/error.c (notify_std): New function. |
| * runtime/main.c (init): Call init_compile_options during |
| initialization. |
| * io/format.c: Use the new notify_std function for the $ |
| descriptor extension. |
| |
| 2005-08-09 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| * Makefile.am: Add file intrinsics/tty.c to Makefile process. |
| * Makefile.in: Regenerate. |
| * io/io.h: Prototypes for new functions stream_isatty and |
| stream_ttyname. |
| * io/unix (stream_isatty, stream_ttyname): New functions to call |
| isatty() and ttyname() on a given unit. |
| * intrinsics/tty.c: New file to implement g77 intrinsics TTYNAM |
| and ISATTY. |
| |
| 2005-08-08 Jerry DeLisle <jvdelisle@verizon.net> |
| |
| PR libfortran/23154 |
| * io/transfer.c (data_transfer_init): Initialize |
| current_unit->bytes_left for a read. |
| |
| 2005-08-07 Janne Blomqvist <jblomqvi@cc.hut.fi> |
| |
| PR fortran/22390 |
| * io/backspace.c: File removed, contents moved to ... |
| * io/endfile.c: Ditto. |
| * io/rewind.c: Ditto. |
| * io/file_pos.c: New file, ... here. |
| * Makefile.am: Add file_pos.c to list, remove obsolete files. |
| * Makefile.in: Regenerated. |
| |
| 2005-08-07 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * io/io.h: Change DEFAULT_TEMPDIR to /tmp instead of /var/tmp. |
| * io/unix.c (tempfile): Look at the TEMP environment variable |
| to find the temporary files directory. Whitespace correction. |
| |
| 2005-08-06 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * io/unix.c: Add O_RDWR to open() call. |
| |
| 2005-08-04 Paul Thomas <pault@gcc.gnu.org> |
| |
| * transfer.c (data_transfer_init): Truncate file in |
| sequential WRITE when last_record == 0, rather than |
| current_record. Cures problem on RH9. |
| |
| 2005-08-03 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * libgfortran.h: When isfinite is not provided by the system, |
| define it as a macro, so that it can accept any floating point |
| type. |
| |
| 2005-08-01 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/23178 |
| * intrinsics/flush.c (flush_i8): Add function flush_i8. Update |
| copyright years. |
| |
| 2005-07-31 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/21787 |
| * intrinsics/abort.c (abort): Close units before aborting. |
| Updated copyright years. |
| |
| 2005-07-30 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/22436 |
| * io/write.c (write_real): Add default formats for real(10) and |
| real(16). |
| |
| 2005-07-30 Paul Thomas <pault@gcc.gnu.org> |
| |
| PR fortran/22570 and related issues. |
| * transfer.c (formatted_transfer): Make sure that there |
| really is data present before X- or T- editing. Move all |
| treatment of tabbing during writes to start of next data |
| producing format. Suppress incorrect zeroing of bytes_left |
| in slash formating. Insert int cast for assignment of a |
| difference of two gfc_offsets. |
| |
| 2005-07-23 Jerry DeLisle <jvdelisle@verizon.net> |
| |
| * io/write.c (write_float): Revise output of IEEE exceptional |
| values to comply with F95 and F2003 standards. |
| |
| 2005-07-22 Jerry DeLisle <jvdelisle@verizon.net> |
| |
| PR libfortran/22570 |
| * io/unit.c (init_units): Replace BLANK_ZERO with |
| BLANK_UNSPECIFIED. |
| |
| 2005-07-22 Jerry DeLisle <jvdelisle@verizon.net> |
| |
| PR libfortran/21875 (FM111.f) |
| * io/read.c (next_char): Return a ' ' character when BLANK_ZERO |
| or BLANK_NULL are active. |
| (read_decimal): Interpret ' ' character correctly for BZ or BN. |
| (read_radix): Interpret ' ' character correctly for BZ or BN. |
| (read_f): Interpret ' ' character correctly for BZ or BN. |
| |
| 2005-07-22 Paul Thomas <pault@gcc.gnu.org> |
| |
| PR libfortran/22570 |
| * read.c (read_x): Correct the condition for doing the |
| x-editing during formatted input. |
| * transfer.c (formatted_transfer): Cast offset difference |
| as int, clean-up arithmetic with new variable, bytes_used, |
| zero counters for FMT_SLASH, |
| (data_transfer_init) Zero X- and T-editing counters |
| unconditionally. |
| (next_record_w) Zero X- and T-editing counters. |
| unconditionally. |
| |
| 2005-07-17 Jerry DeLisle <jvdelisle@verizon.net> |
| |
| * io/write.c (write_float): Fix field width checks for |
| printing 'Infinity' or 'Inf'. |
| (output_float): Fix typo in comment. |
| |
| 2005-07-12 Paul Thomas <pault@gcc.gnu.org> |
| |
| PR libfortran/16435 |
| * transfer.c (formatted_transfer): Correct the problems |
| with X- and T-editting that caused TLs followed by TRs |
| to overwrite data, which caused NIST FM908.FOR to fail |
| on many tests. |
| (data_transfer_init): Zero X- and T-editting counters at |
| the start of formatted IO. |
| * write.c (write_x): Write specified number of skips with |
| specified number of spaces at the end. |
| |
| 2005-07-13 Paul Thomas <pault@gcc.gnu.org> |
| |
| * io/read.c (read_complex): Prevent X formatting during reads |
| from going beyond EOR to fix NIST fm908.FOR failure. |
| * io/list_read.c (read_complex): Allow complex data in list- |
| directed reads to have eols either side of the comma to |
| fix NIST FM906.FOR failure. |
| |
| 2005-07-12 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/21593 |
| * io/unix.c: Add member special_file to type unix_stream. |
| (fd_truncate): Don't call ftruncate or chsize if |
| s refers to a special file. |
| (fd_to_stream): initialize s->special_file. |
| |
| 2005-07-11 David Edelsohn <edelsohn@gnu.org> |
| |
| PR libfortran/22412 |
| * io/write.c (otoa): Bias p by SCRATCH_SIZE, not |
| sizeof (SCRATCH_SIZE). |
| (btoa): Same. |
| |
| 2005-07-09 Jerry DeLisle <jvdelisle@verizon.net> |
| |
| PR libfortran/21875 (FM111.f) |
| * io/read.c (next_char): Return a ' ' character when BLANK_ZERO or |
| BLANK_NULL are active. |
| (read_decimal): Interpret ' ' character correctly for BZ or BN. |
| (read_radix): Interpret ' ' character correctly for BZ or BN. |
| (read_f): Interpret ' ' character correctly for BZ or BN. |
| * gfortran.dg/test (fmt_read_bz_bn.f90): New test case. |
| |
| 2005-07-09 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/22217 |
| * io/write.c (extract_unit): New function; extract |
| ints as unsigned signed int of the correct size. |
| (write_int): Use it. |
| * runtime/error.c: Adjust copyright years. |
| Adjust size of buffer to maximum that can occur. |
| |
| 2005-07-07 Tobias Schl"uter <tobias.schlueter@physik.uni-muenchen.de> |
| |
| * libgfortran.h (GFC_ARRAY_DESCRIPTOR): Replace 'type *base' by |
| 'size_t offset'. |
| * intrinsics/cshift0.c, intrinsics/eoshift0.c, |
| intrinsics/eoshift2.c,intrinsics/pack_generic.c, |
| intrinsics/reshape_generic.c, intrinsics/spread_generic.c, |
| intrinsics/transpose_generic.c, intrinsics/unpack_generic, |
| m4/cshift1.m4, m4/eoshift1.m4, m4/eoshift3.m4, m4/iforeach.m4, |
| m4/ifunction.m4, m4/matmul.m4, m4/matmull.m4, m4/reshape.m4, |
| m4,transpose.m4: Set renamed field 'offset' to zero instead of |
| 'base'. |
| * generated/all_l4.c, generated/all_l8.c, |
| generated/any_l4.c, generated/any_l8.c, generated/count_4_l4.c, |
| generated/count_4_l8.c, generated/count_8_l4.c, |
| generated/count_8_l8.c, generated/chift1_4.c, |
| generated/cshift1_8.c, generated/eoshift1_4.c, |
| generated/eoshift1_8.c, generated/eoshift3_4.c, |
| generated/eoshift3_8.c, generated/matmul_c4.c, |
| generated/matmul_c8.c, generated/matmul_i4.c, matmul_i8.c, |
| generated/matmul_l4.c, generated/matmul_l8.c, |
| generated/matmul_r4.c, generated/matmul_r8.c, |
| generated/maxloc0_4_i4.c, generated/maxloc0_4_i8.c, |
| generated/maxloc0_4_r4.c, generated/maxloc0_4_r8.c, |
| generated/maxloc0_8_i4.c, generated/maxloc0_8_i8.c, |
| generated/maxloc0_8_r4.c, generated/maxloc0_8_r8.c, |
| generated/maxloc1_4_i4.c, generated/maxloc1_4_i8.c, |
| generated/maxloc1_4_r4.c, generated/maxloc1_4_r8.c, |
| generated/maxloc1_8_i4.c, generated/maxloc1_8_i8.c, |
| generated/maxloc1_8_r4.c, generated/maxloc1_8_r8.c, |
| generated/maxval_i4.c, generated/maxval_i8.c, |
| generated/maxval_r4.c, generated/maxval_r8.c, |
| generated/minloc0_4_i4.c, generated/minloc0_4_i8.c, |
| generated/minloc0_4_r4.c, generated/minloc0_4_r8.c, |
| generated/minloc0_8_i4.c, generated/minloc0_8_i8.c, |
| generated/minloc0_8_r4.c, generated/minloc0_8_r8.c, |
| generated/minloc1_4_i4.c, generated/minloc1_4_i8.c, |
| generated/minloc1_4_r4.c, generated/minloc1_4_r8.c, |
| generated/minloc1_8_i4.c, generated/minloc1_8_i8.c, |
| generated/minloc1_8_r4.c, generated/minloc1_8_r8.c, |
| generated/minval_i4.c, generated/minval_i8.c, |
| generated/minval_r4.c, generated/minval_r8.c, |
| generated/product_c4.c, generated/product_c8.c, |
| generated/product_i4.c, generated/product_i8.c, |
| generated/product_r4.c, generated/product_r8.c, |
| generated/reshape_c4.c, generated/reshape_c8.c, |
| generated/reshape_i4.c, generated/reshape_i8.c, |
| generated/sum_c4.c, generated/sum_c8.c, generated/sum_i4.c, |
| generated/sum_i8.c, generated/sum_r4.c, generated/sum_r8.c, |
| generated/transpose_c4.c, generated/transpose_c8.c, |
| generated/transpose_i4.c, generated/transpose_i8.c: Regenerate: |
| |
| 2005-07-07 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/21594 |
| * intrinsics/eoshift0.c: If abs(shift) > len, fill the |
| the whole array with the boundary value, but don't overrun it. |
| * intrinsics/eoshift2.c: Likewise. |
| * m4/eoshift1.m4: Likewise. |
| * m4/eoshift3.m4: Likewise. |
| * generated/eoshift1_4.c: Regenerated. |
| * generated/eoshift1_8.c: Regenerated. |
| * generated/eoshift3_4.c: Regenerated. |
| * generated/eoshift3_8.c: Regenerated. |
| |
| 2005-07-07 Feng Wang <fengwang@nudt.edu.cn> |
| |
| PR fortran/16531 |
| * io/transfer.c (formatted_transfer): Enable FMT_A on other types to |
| support Hollerith constants. |
| |
| 2005-07-01 Andreas Jaeger <aj@suse.de> |
| |
| * intrinsics/unpack_generic.c: Remove const from parameter. |
| |
| * io/transfer.c (formatted_transfer): Remove unused variable. |
| |
| 2005-06-28 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/22142 |
| * m4/eoshift1.m4: Correct bstride (it needs to be multiplied |
| by size since it's a char pointer). |
| * m4/eoshift1_4.c: Regenerated. |
| * m4/eoshift1_8.c: Regenerated. |
| |
| 2005-06-28 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/22142 |
| * m4/eoshift3.m4: Correct bstride (it needs to be multiplied |
| by size since it's a char pointer). |
| * m4/eoshift3_4.c: Regenerated. |
| * m4/eoshift3_8.c: Regenerated. |
| |
| 2005-06-28 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/22170 |
| * io/transfer.c (formatted_transfer): Do not iterate on the |
| repeat count of a FMT_SLASH, since this is already done in |
| next_format(). |
| |
| 2005-06-25 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/22144 |
| * m4/cshift1.m4: Remove const from argument ret. |
| Populate return array descriptor if ret->data is NULL. |
| * m4/eoshift1.m4: Likewise. |
| * m4/eoshift3.m4: Likewise. |
| * generated/cshift1_4.c: Regenerated. |
| * generated/cshift1_8.c: Regenerated. |
| * generated/eoshift1_4.c: Regenerated. |
| * generated/eoshift1_8.c: Regenerated. |
| * generated/eoshift3_4.c: Regenerated. |
| * generated/eoshift3_8.c: Regenerated. |
| |
| 2005-06-24 Jerry DeLisle <jvdelisle@verizon.net> |
| |
| PR libfortran/21915 |
| * Makefile.am: Include intrinsics/hyper.c. |
| * c99_protos.h: Add prototypes for single precision versions of |
| acosh, asinh, and atanh for platforms that do not have these. |
| * config.h.in: Add #undef for wrappers. |
| * configure.ac: Add checks for single precision versions. |
| * aclocal.m4: Regenerated. |
| * Makefile.in: Regenerated. |
| * configure: Regenerated. |
| * intrinsics/hyper.c: New file, adds new wrapper functions. |
| |
| 2005-06-23 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * intrinsics/c99_functions.c (log10l): New log10l function for |
| systems where this is not available. |
| * c99_protos.h: Prototype for log10l function. |
| * libgfortran.h: Use generated kinds.h to define GFC_INTEGER_*, |
| GFC_UINTEGER_*, GFC_LOGICAL_*, GFC_REAL_*, GFC_COMPLEX_*. Update |
| prototypes for gfc_itoa and xtoa. |
| * io/io.h: Update prototypes for set_integer and max_value. |
| * io/list_read.c (convert_integer): Use new |
| GFC_(INTEGER|REAL)_LARGEST type. |
| * io/read.c (set_integer): Likewise. |
| (max_value): Likewise. |
| (convert_real): Likewise. |
| (real_l): Likewise. |
| (next_char): Likewise. |
| (read_decimal): Likewise. |
| (read_radix): Likewise. |
| (read_f): Likewise. |
| * io/write.c (extract_int): Use new GFC_INTEGER_LARGEST type. |
| (extract_real): Use new GFC_REAL_LARGEST type. |
| (calculate_exp): Likewise. |
| (calculate_G_format): Likewise. |
| (output_float): Likewise. Use log10l for long double values. |
| Add comment for sprintf format. Use GFC_REAL_LARGEST_FORMAT. |
| (write_l): Use new GFC_INTEGER_LARGEST type. |
| (write_float): Use new GFC_REAL_LARGEST type. |
| (write_int): Remove useless special case for (len < 8). |
| (write_decimal): Use GFC_INTEGER_LARGEST. |
| (otoa): Use GFC_UINTEGER_LARGEST as argument. |
| (btoa): Use GFC_UINTEGER_LARGEST as argument. |
| * runtime/error.c (gfc_itoa): Use GFC_INTEGER_LARGEST as |
| argument. |
| (xtoa): Use GFC_UINTEGER_LARGEST as argument. |
| * Makefile.am: Use mk-kinds-h.sh to generate header kinds.h |
| with all Fortran kinds available. |
| * configure.ac: Check for strtold and log10l. |
| * Makefile.in: Regenerate. |
| * aclocal.m4: Regenerate. |
| * configure: Regenerate. |
| * config.h.in: Regenerate. |
| * mk-kinds-h.sh: Configuration script for available integer |
| and real kinds. |
| |
| |
| 2005-06-18 Janne Blomqvist <jblomqvi@cc.hut.fi> |
| |
| * unix.c (stream_at_bof): Don't assume that all non-mmapped files |
| are non-seekable. |
| (stream_at_eof): Likewise. |
| |
| 2005-06-18 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/19155 |
| * io/read.c (convert_real): strtod can set errno to EINVAL on an |
| empty string, but we shouldn't have an error in that case. |
| |
| 2005-06-17 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/19216 |
| * io/list_read.c (eat_separator): No need to call next_record, |
| even in non-namelist_mode. |
| |
| 2005-06-17 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * io/transfer.c (formatted_transfer): Fix typo in error message. |
| |
| 2005-06-17 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/16436 |
| * io/transfer.c (read_sf): Correct updating of bytes_left field. |
| (formatted_transfer): Correct updating of bytes_left field and |
| reformatting code (comments and whitespace). |
| * io/unix.c (move_pos_offset): "active" field should not be |
| changed here. Whitespace corrections. |
| |
| 2005-06-15 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/21950 |
| * intrinsics/c99_functions.c (scalbn): Provide fallback |
| implementation for scalbn. |
| * c99_protos.h: Prototype for scalbn. |
| * configure.ac: Add check for scalbn. |
| * configure: Regenerate. |
| * config.h.in: Regenerate. |
| |
| 2005-06-14 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| * intrinsics/eoshift0.c: Removed prototype for eoshift0. |
| * intrinsics/eoshift2.c: Removed prototype for eoshift2. |
| |
| 2005-06-14 Tom Tromey <tromey@redhat.com> |
| |
| PR libgcj/19877: |
| * configure, aclocal.m4, Makefile.in: Rebuilt. |
| |
| 2005-06-12 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/21594 |
| * intrinsics/eoshift0.c: Add prototype for eoshift0. |
| * intrinsics/eoshift2.c: Add prototype for eoshift2. |
| |
| 2005-06-12 Steven G. Kargl <kargls@comcast.net> |
| Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/PR21797 |
| * m4/cexp.m4 (csqrt`'q): Add type qualifyer to |
| sqrt and fabs. |
| * generated/exp_c4.c: Regenerated. |
| |
| 2005-06-12 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/19155 |
| * io/read.c (read_f): Take care of spaces after initial sign. |
| |
| 2005-06-11 Thomas Koenig <Thomas.Koenig@onlinde.de> |
| |
| PR libfortran/21333 |
| * Makefile.am: Add in_pack_c4.c, in_pack_c8.c, in_unpack_c4.c |
| and in_unpack_c8.c. |
| * Makefile.in: Regenerate. |
| * libgfortran.h: Declare internal_pack_c4, internal_pack_c8, |
| internal_unpack_c4 and internal_unpack_c8. |
| * m4/in_pack.m4: Use rtype_ccode insteald of rtype_kind |
| in function name. |
| Use sizeof (rtype_name) as size for memory allocation. |
| * m4/in_unpack.m4: Use rtype_ccode insteald of rtype_kind |
| in function name. |
| Use sizeof (rtype_name) for calculation of sizes for memcpy. |
| * runtime/in_pack_generic.c: For real, integer and logical |
| call internal_pack_4 if size==4 and internal_pack_8 if |
| size==8. |
| For complex, call internal_pack_c4 if size==8 and |
| internal_pack_c8 if size==16. |
| * runtime/in_unpack_generic.c: For real, integer and logical |
| call internal_unpack_4 if size==4 and internal_unpack_8 if |
| size==8. |
| For complex, call internal_unpack_c4 if size==8 and |
| internal_unpack_c8 if size==16. |
| * generated/in_pack_i4.c: Regenerated. |
| * generated/in_pack_i8.c: Regenerated. |
| * generated/in_unpack_i4.c: Regenerated. |
| * generated/in_unpack_i8.c: Regenerated. |
| * generated/in_pack_c4.c: New file. |
| * generated/in_pack_c8.c: New file. |
| * generated/in_unpack_c4.c: New file. |
| * generated/in_unpack_c8.c: New file. |
| |
| 2005-06-09 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/21480 |
| * m4/reshape.m4: Use sizeof (rtype_name) for sizes to be passed |
| to reshape_packed. |
| * generated/reshape_c4.c: Regenerated. |
| * generated/reshape_c8.c: Regenerated. |
| * generated/reshape_i4.c: Regenerated. |
| * generated/reshape_i8.c: Regenerated. |
| |
| 2005-06-07 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/21926 |
| * m4/matmul.m4: Correct zeroing of result for non-packed |
| arrays with lowest stride is one. |
| * generated/matmul_c4.c: Regenerated. |
| * generated/matmul_c8.c: Regenerated. |
| * generated/matmul_i4.c: Regenerated. |
| * generated/matmul_i8.c: Regenerated. |
| * generated/matmul_r4.c: Regenerated. |
| * generated/matmul_r8.c: Regenerated. |
| |
| 2005-05-30 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/20179 |
| * io/unix.c (fd_close): Add test so that we don't close() |
| stdout and stderr. |
| |
| 2005-05-29 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/20006 |
| * io/format.c (parse_format_list): Set repeat count of $ format |
| node to 1. |
| * io/transfer.c (read_sf): Add g.seen_dollar to the test |
| concerning advancing I/O. |
| (data_transfer_init): Likewise. |
| (finalize_transfer): Likewise. |
| |
| 2005-05-27 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| * runtime/in_pack_generic.c: Adjust copyright years. |
| (in_pack_generic): Change dimension of auxiliary arrays from |
| GFC_MAX_DIMENSION - 1 to GFC_MAX_DIMENSION. |
| * runtime/in_unpack_generic.c: Adjust copyright years. |
| (in_unpack_generic): Change dimension of auxiliary arrays from |
| GFC_MAX_DIMENSION - 1 to GFC_MAX_DIMENSION. |
| |
| 2005-05-26 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/17283 |
| * intrinsics/unpack_generic.c: Fix name of routine |
| on top. Update copyright years. |
| (unpack1): Remove const from return array descriptor. |
| rs: New variable, for calculating return sizes. |
| Populate return array descriptor if ret->data is NULL. |
| |
| 2005-05-22 Peter Wainwright <prw@ceiriog1.demon.co.uk> |
| |
| PR libfortran/21376 |
| * io/write.c (output_float): Rework logic to avoid call to log10 |
| with argument equal to zero. |
| |
| 2005-05-21 Eric Botcazou <ebotcazou@libertysurf.fr> |
| |
| * configure.ac: Check for trunc and truncf in libm. |
| * configure: Regenerate. |
| * config.h.in: Likewise. |
| * intrinsics/c99_functions.c (trunc, truncf): New functions. |
| * c99_protos.h (trunc, truncf): Declare them. |
| |
| 2005-05-18 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/21127 |
| * Makefile.am: Really commit. |
| * Makefile.in: Really commit. |
| |
| 2005-05-18 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/21127 |
| * Makefile.am: Add generated/reshape_c4.c and |
| generated/reshape_c8.c. |
| * Makefile.in: Regenerated. |
| * m4/iparm.m4: Define rtype_ccode to be c4 or c8 for |
| complex types, 4 or 8 otherwise. |
| * m4/reshape.m4: Use rtype_ccode instead of rtype_kind |
| in function name. |
| * generated/reshape_c4.c: New file. |
| * generated/reshape_c8.c: New file. |
| |
| 2005-05-16 Andreas Jaeger <aj@suse.de> |
| |
| * configure.ac: Add additional warning flags. |
| * configure: Regenerate. |
| |
| * io/write.c (calculate_G_format): Remove unused parameter. |
| (output_float): Remove unused parameter. |
| (write_float): Change callers. |
| (nml_write_obj): Avoid signed warning. |
| Make variable const to support -Wwrite-strings. |
| |
| * io/unix.c (fd_alloc, mmap_open, mmap_sfree, mem_sfree, |
| mem_truncate): Mark argument as unused. |
| |
| * io/unit.c (get_unit): Mark argument as unused. |
| (init_units): Avoid warning about signed comparision. |
| |
| * io/transfer.c (next_record_r): Remove unused parameter. |
| (next_record_w): Remove unused parameter. |
| (next_record): Change callers. |
| (iolength_transfer): Mark arguments as unused. |
| |
| * io/open.c: Add initializer. |
| |
| * io/list_read.c (read_character): Mark argument as unused. |
| (nml_match_name): Add const to make compile with -Wwrite-strings. |
| |
| * io/format.c: Add initializer. |
| |
| 2005-05-15 Andreas Jaeger <aj@suse.de> |
| |
| * m4/eoshift1.m4: Initialize variables to avoid warnings. |
| * m4/eoshift3.m4: Initialize variables to avoid warnings. |
| * generated/eoshift1_4.c, generated/eoshift1_8.c, |
| generated/eoshift3_4.c, generated/eoshift3_8.c: Regenerated. |
| |
| * intrinsics/spread_generic.c (spread): Initialize variables to |
| avoid warnings. |
| |
| * intrinsics/eoshift0.c (eoshift0): Initialize variables to avoid |
| warnings. |
| * intrinsics/eoshift2.c (eoshift2): Initialize variables to avoid |
| warnings. |
| |
| * io/list_read.c (nml_get_obj_data): Initialize variables to avoid |
| warnings. |
| |
| * intrinsics/pack_generic.c (pack): Remove unneeded calculation. |
| |
| * m4/matmull.m4 (matmul_): Remove unneeded calculations, fix |
| pointer cast to avoid warning. |
| * generated/matmul_l4.c: Regenerated. |
| * generated/matmul_l8.c: Regenerated. |
| |
| * Makefile.am: Remove AM_CFLAGS here. |
| * configure.ac: Define AM_CFLAGS and AM_FCFLAGS so that warnings |
| are set. Set additionally -Wstrict-prototypes for CFLAGS. |
| * Makefile.in: Regenerated. |
| * aclocal.m4: Regenerated. |
| * configure: Regenerated. |
| |
| * intrinsics/system_clock.c (system_clock_4, system_clock_8): Add |
| missing returns, reformat a bit. |
| |
| * io/write.c (nml_write_obj): Use %d again - and cast to int, |
| st_sprintf does not handle %ld. |
| |
| * io/unit.c (is_internal_unit): Add void as parameter list. |
| |
| * io/transfer.c: Move prototype declarations before the functions. |
| |
| * runtime/normalize.c (almostone_r4, almostone_r8): Fix parameter |
| list. |
| |
| * intrinsics/random.c (KISS_DEFAULT_SEED): Remove extra semicolon. |
| |
| * io/transfer.c: Do not use empty initializers for global objects. |
| Add missing initializers. |
| |
| * io/lock.c: Do not use empty initializers for global objects. |
| |
| * io/close.c: Add missing initializers. |
| |
| * runtime/environ.c: Add missing initializers. Do not use empty |
| initializers for global object. |
| (init_string): Mark argument as unused. |
| |
| * runtime/main.c (cleanup): Fix parameter list. |
| |
| * io/io.h: Fix parameter lists. |
| |
| * m4/transpose.m4, m4/matmul.m4: Fix pointer cast to avoid |
| warning. |
| |
| * generated/transpose_c4.c, generated/transpose_c8.c, |
| generated/transpose_i4.c, generated/transpose_i8.c, |
| generated/matmul_c4.c, generated/matmul_c8.c, |
| generated/matmul_i4.c, generated/matmul_i8.c, |
| generated/matmul_r4.c, generated/matmul_r8.c: Regenerated. |
| |
| * io/write.c (nml_write_obj): Fix 64-bit problem. |
| |
| * io/list_read.c (nml_get_obj_data): Add missing braces around |
| initializer to avoid warnings. |
| |
| * intrinsics/etime.c (etime_sub): Remove unused variable. |
| |
| * intrinsics/chdir.c, intrinsics/getlog.c, intrinsics/link.c, |
| intrinsics/symlnk.c, intrinsics/perror.c: Include <string.h> for |
| prototypes. |
| |
| * runtime/string.c (compare0): Remove unused variable. |
| * io/unit.c (init_units): Remove unused variables. |
| * intrinsics/getcwd.c (getcwd_i4_sub): Remove unused variable. |
| * intrinsics/unlink.c (unlink_i4_sub): Remove unused variable. |
| * intrinsics/stat.c (stat_i4_sub, fstat_i8_sub, fstat_i4_sub, |
| stat_i8_sub): Remove unused variable. |
| |
| 2005-05-12 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/21324 |
| * runtime/memory.c: Don't define GFC_CLEAR_MEMORY (it's a |
| performance hog). |
| * io/open.c (new_unit): Zero freshly allocated memory for |
| unit structure. |
| * io/unit.c (init_units): Zero freshly allocated memory for |
| STDIN, STDOUT and STDERR. |
| * io/unix.c (open_internal): Zero freshly allocated memory |
| for unix_stream. |
| (fd_to_stream): Likewise. |
| |
| 2005-05-11 Bud Davis <bdavis@gfortran.org> |
| |
| PR fortran/19478 |
| * io/unix.c (fd_truncate): update positions when ftruncate |
| fails (like writing to /dev/null). |
| |
| 2005-05-10 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/21471 |
| * open.c (new_unit): Take care of the case where POSITION_APPEND |
| is specified (sseek to the end, and set u>-endfile). |
| |
| 2005-05-10 Tobias Schl"uter <tobias.schlueter@physik.uni-muenchen.de> |
| |
| PR fortran/20178 |
| * Makefile.am (gfor_specific_src): Add 'intrinsics/f2c_intrinsics.F90' |
| to dependencies. |
| * Makefile.in: Regenerate. |
| * intrinsics/f2c_specific.F90: New file. |
| |
| 2005-05-10 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/20788 |
| * io/unix.c (fd_to_stream): Add an avoid_mmap argument indicating |
| we don't we to mmap this stream. Use fd_open instead of mmap_open |
| in that case. |
| (open_external): Call fd_to_stream with avoid_mmap = 0. |
| (input_stream): Call fd_to_stream with avoid_mmap = 1. |
| (output_stream): Likewise. |
| (error_stream): Likewise. |
| |
| 2005-05-09 Mike Stump <mrs@apple.com> |
| |
| * configure: Regenerate. |
| |
| 2005-05-09 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/19155 |
| * io/read.c (read_f): Accept 'e', 'E', 'd' and 'D' as first |
| non-blank characters of a real number. |
| |
| 2005-05-04 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/21354 |
| * m4/cshift1.m4: Change dimension of auxiliary arrays from |
| GFC_MAX_DIMENSION - 1 to GFC_MAX_DIMENSION. |
| * m4/eoshift1.m4: Likewise. |
| * m4/eoshift3.m4: Likewise. |
| * m4/ifunction.m4: Likewise. |
| * m4/in_pack.m4: Likewise. |
| * m4/in_unpack.m4: Likewise. |
| * intrinsics/cshift0.c: Likewise. |
| * intrinsics/eoshift0.c: Likewise. |
| * intrinsics/eoshift2.c: Likewise. |
| * intrinsics/random.c: Likewise. |
| * intrinsics/spread_generic.c: Likewise. |
| * intrinsics/stat.c: Likewise. |
| * generated/all_l4.c: Regenerated. |
| * generated/all_l8.c: Regenerated. |
| * generated/any_l4.c: Regenerated. |
| * generated/any_l8.c: Regenerated. |
| * generated/count_4_l4.c: Regenerated. |
| * generated/count_4_l8.c: Regenerated. |
| * generated/count_8_l4.c: Regenerated. |
| * generated/count_8_l8.c: Regenerated. |
| * generated/cshift1_4.c: Regenerated. |
| * generated/cshift1_8.c: Regenerated. |
| * generated/eoshift1_4.c: Regenerated. |
| * generated/eoshift1_8.c: Regenerated. |
| * generated/eoshift3_4.c: Regenerated. |
| * generated/eoshift3_8.c: Regenerated. |
| * generated/in_pack_i4.c: Regenerated. |
| * generated/in_pack_i8.c: Regenerated. |
| * generated/in_unpack_i4.c: Regenerated. |
| * generated/in_unpack_i8.c: Regenerated. |
| * generated/maxloc0_4_i4.c: Regenerated. |
| * generated/maxloc0_4_i8.c: Regenerated. |
| * generated/maxloc0_4_r4.c: Regenerated. |
| * generated/maxloc0_4_r8.c: Regenerated. |
| * generated/maxloc0_8_i4.c: Regenerated. |
| * generated/maxloc0_8_i8.c: Regenerated. |
| * generated/maxloc0_8_r4.c: Regenerated. |
| * generated/maxloc0_8_r8.c: Regenerated. |
| * generated/maxloc1_4_i4.c: Regenerated. |
| * generated/maxloc1_4_i8.c: Regenerated. |
| * generated/maxloc1_4_r4.c: Regenerated. |
| * generated/maxloc1_4_r8.c: Regenerated. |
| * generated/maxloc1_8_i4.c: Regenerated. |
| * generated/maxloc1_8_i8.c: Regenerated. |
| * generated/maxloc1_8_r4.c: Regenerated. |
| * generated/maxloc1_8_r8.c: Regenerated. |
| * generated/maxval_i4.c: Regenerated. |
| * generated/maxval_i8.c: Regenerated. |
| * generated/maxval_r4.c: Regenerated. |
| * generated/maxval_r8.c: Regenerated. |
| * generated/minloc0_4_i4.c: Regenerated. |
| * generated/minloc0_4_i8.c: Regenerated. |
| * generated/minloc0_4_r4.c: Regenerated. |
| * generated/minloc0_4_r8.c: Regenerated. |
| * generated/minloc0_8_i4.c: Regenerated. |
| * generated/minloc0_8_i8.c: Regenerated. |
| * generated/minloc0_8_r4.c: Regenerated. |
| * generated/minloc0_8_r8.c: Regenerated. |
| * generated/minloc1_4_i4.c: Regenerated. |
| * generated/minloc1_4_i8.c: Regenerated. |
| * generated/minloc1_4_r4.c: Regenerated. |
| * generated/minloc1_4_r8.c: Regenerated. |
| * generated/minloc1_8_i4.c: Regenerated. |
| * generated/minloc1_8_i8.c: Regenerated. |
| * generated/minloc1_8_r4.c: Regenerated. |
| * generated/minloc1_8_r8.c: Regenerated. |
| * generated/minval_i4.c: Regenerated. |
| * generated/minval_i8.c: Regenerated. |
| * generated/minval_r4.c: Regenerated. |
| * generated/minval_r8.c: Regenerated. |
| * generated/product_c4.c: Regenerated. |
| * generated/product_c8.c: Regenerated. |
| * generated/product_i4.c: Regenerated. |
| * generated/product_i8.c: Regenerated. |
| * generated/product_r4.c: Regenerated. |
| * generated/product_r8.c: Regenerated. |
| * generated/sum_c4.c: Regenerated. |
| * generated/sum_c8.c: Regenerated. |
| * generated/sum_i4.c: Regenerated. |
| * generated/sum_i8.c: Regenerated. |
| * generated/sum_r4.c: Regenerated. |
| * generated/sum_r8.c: Regenerated. |
| |
| 2005-04-30 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/18958 |
| libgfortran.h: Change typedef of index_type from size_t |
| to ssize_t. |
| |
| 2005-04-30 Paul Thomas <pault@gcc.gnu.org> |
| |
| PR libfortran/18857 |
| * generated/matmul_r8.c: Remove incorrect assertions. |
| * generated/matmul_c4.c: Regenerate |
| * generated/matmul_c8.c: Regenerate |
| * generated/matmul_i4.c: Regenerate |
| * generated/matmul_i8.c: Regenerate |
| * generated/matmul_r4.c: Regenerate |
| * generated/matmul_r8.c: Regenerate |
| |
| 2005-04-29 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * configure.ac: Check for ftruncate and chsize. |
| * io/unix.c (fd_truncate): Provide chsize as alternative to |
| ftruncate. |
| * config.h.in: Regenerate. |
| * configure: Regenerate. |
| |
| 2005-04-29 Tobias Schl"uter <tobias.schlueter@physik.uni-muenchen.de> |
| |
| * intrinsics/rename.c: Add missing #includes. |
| |
| 2005-04-28 Tobias Schl"uter <tobias.schlueter@physik.uni-muenchen.de> |
| |
| * AUTHORS, COPYING, INSTALL, NEWS, README: Remove. |
| |
| 2005-04-26 David Edelsohn <edelsohn@gnu.org> |
| |
| PR libfortran/20930 |
| * io/rewind.c (st_rewind): Flush the stream when resetting the mode |
| from WRITING to READING. |
| |
| 2005-04-22 Paul Thomas <pault@gcc.gnu.org> |
| Jerry DeLisle <jvdelisle@verizon.net> |
| |
| * io/write.c (nml_write_obj): Provide 1 more byte for ext_name. |
| * io/list_read.c (nml_get_obj_data): Put extra brackets in get_mem |
| call for ext_name. These fix the bug reported by Jerry DeLisle to |
| the fortran list and are based on his suggested fix. |
| |
| 2005-04-22 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/20074 |
| PR libfortran/20436 |
| PR libfortran/21108 |
| * m4/reshape.m4 (reshape_`'rtype_kind): rs, rex: New |
| variables, to be used in calculation of return array sizes. |
| Populate return array descriptor if ret->data is NULL. |
| Fix condition for early return (it used to test something |
| undefined if order was used). |
| Remove duplicate check wether pad is used. |
| * intrinsics/reshape_generic.c (reshape_generic): Likewise. |
| Fix a few places where the wrong variables were set. |
| * generated/reshape_i4.c: Regenerated. |
| * generated/reshape_i8.c: Regenerated. |
| |
| 2005-04-18 Paul Thomas <pault@gcc.gnu.org> |
| |
| * io/list_read.c (nml_touch_nodes, nml_read_obj, |
| nml_get_obj_data): Fix memory leaks in code for derived types. |
| |
| 2005-04-11 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/20950 |
| * io/inquire.c (inquire_via_unit): Check for the gfc_unit being |
| NULL when setting ioparm.sequential. |
| |
| 2005-04-17 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/21075 |
| * m4/reshape.m4 (reshape_`'rtype_kind): Change dimension |
| of auxiliary arrays from GFC_MAX_DIMENSIONS - 1 to |
| GFC_MAX_DIMENSIONS. |
| * intrinsics/reshape_generic.c (reshape_generic): Likewise. |
| * generated/reshape_i4.c: Regenerated. |
| * generated/reshape_i8.c: Regenerated. |
| |
| 2005-04-17 Paul Thomas <pault@gcc.gnu.org> |
| |
| * io/list_read.c (eat_separator): at_eol = 1 replaced |
| (zapped at some time?). |
| |
| 2005-04-17 Paul Thomas <pault@gcc.gnu.org> |
| |
| PR libfortran/12884 |
| PR libfortran/17285 |
| PR libfortran/18122 |
| PR libfortran/18210 |
| PR libfortran/18392 |
| PR libfortran/18591 |
| PR libfortran/18879 |
| * io/io.h (nml_ls): Declare. |
| (namelist_info): Modify for arrays. |
| * io/list_read.c (namelist_read): Reduced to call to new functions. |
| (match_namelist_name): Simplified. |
| (nml_query): Handles stdin queries ? and =?. New function. |
| (nml_get_obj_data): Parses object name. New function. |
| (touch_nml_nodes): Marks objects for read. New function. |
| (untouch_nml_nodes): Resets objects. New function. |
| (parse_qualifier): Parses and checks qualifiers. New function |
| (nml_read_object): Reads and stores object data. New function. |
| (eat_separator): No new_record on '/' in namelist. |
| (finish_separator): No new_record on '/' in namelist. |
| (read_logical): Error return for namelist. |
| (read_integer): Error return for namelist. |
| (read_complex): Error return for namelist. |
| (read_real): Error return for namelist. |
| * io/lock.c (library_end): Free extended namelist_info types. |
| * io/transfer.c (st_set_nml_var): Modified for arrays. |
| (st_set_nml_var_dim): Dimension descriptors. New function. |
| * io/write.c (namelist_write): Reduced to call to new functions. |
| (nml_write_obj): Writes output for object. New function. |
| (write_integer): Suppress leading blanks for repeat counts. |
| (write_int): Suppress leading blanks for repeat counts. |
| (write_float): Suppress leading blanks for repeat counts. |
| (output_float): Suppress leading blanks for repeat counts. |
| |
| 2005-04-15 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/18495 |
| * intrinsics/spread_generic.c (spread): Remove const from |
| return array descriptor. |
| New variables: rrank (rank of return array), rs (for |
| calculating the size of the return array), srank (rank |
| of the source array). |
| Generate runtime error if the dim= argument is larger than |
| the rank of the return array. |
| Generate runtime error if the needed rank of the return |
| array is larger than 7. |
| If ret->data is null, populate the return array descriptor |
| and initialize the variables for the actual operation. |
| Otherwise, set ret->dim[0].stride to one if it is zero. |
| Change second, independent use of variable dim to srank. |
| |
| 2005-04-12 Mike Stump <mrs@apple.com> |
| |
| * configure: Regenerate. |
| |
| 2005-04-13 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/19106 |
| * m4/iforeach.c (name`'rtype_qual`_'atype_code): Add TODO |
| that setting correct strides is a front end job. |
| (`m'name`'rtype_qual`_'atype_code): Likewise. If mask has |
| a lowest stride of 0, adjust to 1. |
| * m4/ifunction.c (name`'rtype_qual`_'atype_code): Add TODO |
| that setting correct strides is a front end job. |
| (`m'name`'rtype_qual`_'atype_code): Likewise. If mask has |
| a lowest stride of 0, adjust to 1. |
| * maxloc0_4_i4.c: Regenerated |
| * maxloc0_4_i8.c: Regenerated |
| * maxloc0_4_r4.c: Regenerated |
| * maxloc0_4_r8.c: Regenerated |
| * maxloc0_8_i4.c: Regenerated |
| * maxloc0_8_i8.c: Regenerated |
| * maxloc0_8_r4.c: Regenerated |
| * maxloc0_8_r8.c: Regenerated |
| * maxloc1_4_i4.c: Regenerated |
| * maxloc1_4_i8.c: Regenerated |
| * maxloc1_4_r4.c: Regenerated |
| * maxloc1_4_r8.c: Regenerated |
| * maxloc1_8_i4.c: Regenerated |
| * maxloc1_8_i8.c: Regenerated |
| * maxloc1_8_r4.c: Regenerated |
| * maxloc1_8_r8.c: Regenerated |
| * maxval_i4.c: Regenerated |
| * maxval_i8.c: Regenerated |
| * maxval_r4.c: Regenerated |
| * maxval_r8.c: Regenerated |
| * minloc0_4_i4.c: Regenerated |
| * minloc0_4_i8.c: Regenerated |
| * minloc0_4_r4.c: Regenerated |
| * minloc0_4_r8.c: Regenerated |
| * minloc0_8_i4.c: Regenerated |
| * minloc0_8_i8.c: Regenerated |
| * minloc0_8_r4.c: Regenerated |
| * minloc0_8_r8.c: Regenerated |
| * minloc1_4_i4.c: Regenerated |
| * minloc1_4_i8.c: Regenerated |
| * minloc1_4_r4.c: Regenerated |
| * minloc1_4_r8.c: Regenerated |
| * minloc1_8_i4.c: Regenerated |
| * minloc1_8_i8.c: Regenerated |
| * minloc1_8_r4.c: Regenerated |
| * minloc1_8_r8.c: Regenerated |
| * minval_i4.c: Regenerated |
| * minval_i8.c: Regenerated |
| * minval_r4.c: Regenerated |
| * minval_r8.c: Regenerated |
| * product_c4.c: Regenerated |
| * product_c8.c: Regenerated |
| * product_i4.c: Regenerated |
| * product_i8.c: Regenerated |
| * product_r4.c: Regenerated |
| * product_r8.c: Regenerated |
| * sum_c4.c: Regenerated |
| * sum_c8.c: Regenerated |
| * sum_i4.c: Regenerated |
| * sum_i8.c: Regenerated |
| * sum_r4.c: Regenerated |
| * sum_r8.c: Regenerated |
| |
| 2005-04-10 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/20788 |
| * runtime/environ.c (init_unsigned_integer): Function for |
| environment variables we want to be positive. |
| (init_integer): Function to allow negative environment |
| variables (e.g. for GFORTRAN_STDIN_UNIT). |
| |
| 2005-04-10 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/17992 |
| PR libfortran/19568 |
| PR libfortran/19595 |
| PR libfortran/20005 |
| PR libfortran/20092 |
| PR libfortran/20131 |
| PR libfortran/20661 |
| PR libfortran/20744 |
| * io/transfer.c (top level): eor_condition: New static variable. |
| (read_sf): Remove unnecessary zeroing of buffer (there is enough |
| information in its length). |
| Return a string of length 0 (to be padded by caller) if EOR was |
| seen previously. |
| Remove erroneous special casing of EOR for standard input. |
| Set eor_condition for non-advancing I/O if an end of line was |
| detected. |
| Increment ioparm.size if necessary. |
| (formatted_transfer): Skip the function if there is an EOR condition. |
| (data_transfer_init): Initialize eor_condition to zero (false). |
| (next_record_r): Clear sf_seen_eor if a \n has been seen already. |
| (finalize_transfer): If there is an EOR condition, raise the error. |
| |
| 2005-04-09 Bud Davis <bdavis@gfortran.org> |
| Steven G. Kargl <kargls@comcast.net> |
| |
| PR fortran/19872 |
| * io/transfer.c (data_transfer_init): truncate an existing |
| file on the first write. |
| |
| 2005-04-09 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/19106 |
| PR libfortran/19014 |
| * m4/ifunction.m4 (name`'rtype_qual`_'atype_code): ditto. |
| If retarray->data is NULL (i.e. the front end does not |
| know the rank and dimenson of the array), fill in its |
| properties and allocate memory. |
| Change the assertions about rank and dimension of retarray into |
| runtime errors and only check them for retarray->data != NULL. |
| Do the same for correcting the stride from 0 to 1 in retarray. |
| (`m'name`'rtype_qual`_'atype_code): Likewise. |
| * m4/iforeach.m4 (name`'rtype_qual`_'atype_code): Likewise. |
| Change assertion about rank of array to runtime error. |
| (`m'name`'rtype_qual`_'atype_code): Likewise. |
| * generated/all_l4.c: Regenerated. |
| * generated/all_l8.c: Regenerated. |
| * generated/any_l4.c: Regenerated. |
| * generated/any_l8.c: Regenerated. |
| * generated/count_4_l4.c: Regenerated. |
| * generated/count_4_l8.c: Regenerated. |
| * generated/count_8_l4.c: Regenerated. |
| * generated/count_8_l8.c: Regenerated. |
| * generated/maxloc0_4_i4.c: Regenerated. |
| * generated/maxloc0_4_i8.c: Regenerated. |
| * generated/maxloc0_4_r4.c: Regenerated. |
| * generated/maxloc0_4_r8.c: Regenerated. |
| * generated/maxloc0_8_i4.c: Regenerated. |
| * generated/maxloc0_8_i8.c: Regenerated. |
| * generated/maxloc0_8_r4.c: Regenerated. |
| * generated/maxloc0_8_r8.c: Regenerated. |
| * generated/maxloc1_4_i4.c: Regenerated. |
| * generated/maxloc1_4_i8.c: Regenerated. |
| * generated/maxloc1_4_r4.c: Regenerated. |
| * generated/maxloc1_4_r8.c: Regenerated. |
| * generated/maxloc1_8_i4.c: Regenerated. |
| * generated/maxloc1_8_i8.c: Regenerated. |
| * generated/maxloc1_8_r4.c: Regenerated. |
| * generated/maxloc1_8_r8.c: Regenerated. |
| * generated/maxval_i4.c: Regenerated. |
| * generated/maxval_i8.c: Regenerated. |
| * generated/maxval_r4.c: Regenerated. |
| * generated/maxval_r8.c: Regenerated. |
| * generated/minloc0_4_i4.c: Regenerated. |
| * generated/minloc0_4_i8.c: Regenerated. |
| * generated/minloc0_4_r4.c: Regenerated. |
| * generated/minloc0_4_r8.c: Regenerated. |
| * generated/minloc0_8_i4.c: Regenerated. |
| * generated/minloc0_8_i8.c: Regenerated. |
| * generated/minloc0_8_r4.c: Regenerated. |
| * generated/minloc0_8_r8.c: Regenerated. |
| * generated/minloc1_4_i4.c: Regenerated. |
| * generated/minloc1_4_i8.c: Regenerated. |
| * generated/minloc1_4_r4.c: Regenerated. |
| * generated/minloc1_4_r8.c: Regenerated. |
| * generated/minloc1_8_i4.c: Regenerated. |
| * generated/minloc1_8_i8.c: Regenerated. |
| * generated/minloc1_8_r4.c: Regenerated. |
| * generated/minloc1_8_r8.c: Regenerated. |
| * generated/minval_i4.c: Regenerated. |
| * generated/minval_i8.c: Regenerated. |
| * generated/minval_r4.c: Regenerated. |
| * generated/minval_r8.c: Regenerated. |
| * generated/product_c4.c: Regenerated. |
| * generated/product_c8.c: Regenerated. |
| * generated/product_i4.c: Regenerated. |
| * generated/product_i8.c: Regenerated. |
| * generated/product_r4.c: Regenerated. |
| * generated/product_r8.c: Regenerated. |
| * generated/sum_c4.c: Regenerated. |
| * generated/sum_c8.c: Regenerated. |
| * generated/sum_i4.c: Regenerated. |
| * generated/sum_i8.c: Regenerated. |
| * generated/sum_r4.c: Regenerated. |
| * generated/sum_r8.c: Regenerated. |
| |
| 2005-04-09 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/20163 |
| * runtime/string.c (compare0): Use fstrlen() to |
| strip trailing blanks from option string. |
| |
| 2005-04-09 Andrew Pinski <pinskia@physics.uc.edu> |
| |
| PR fortran/13257 |
| * format.c (parse_format_list): Allow an optional comma |
| between descriptors. |
| |
| 2005-04-08 Eric Botcazou <ebotcazou@libertysurf.fr> |
| |
| * io/backspace.c (unformatted_backspace): Do not dereference |
| the pointer to the stream. |
| |
| 2005-04-07 Andrew Pinski <pinskia@physics.uc.edu> |
| |
| PR libfortran/20766 |
| * configure.ac (extra_ldflags_libgfortran): Set for *-darwin* to |
| "-Wl,-single_module". |
| * configure: Regenerate. |
| * Makefile.am (libgfortran_la_LDFLAGS): Add extra_ldflags_libgfortran. |
| * Makefile.in: Regenerate. |
| |
| 2005-04-05 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/20755 |
| * write.c (write_float): A G edit descriptor may locally change |
| the scale factor, but it needs to be restored afterwards. |
| |
| 2005-04-03 Dale Ranta <dir@lanl.gov> |
| Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/20068 |
| PR libfortran/20125 |
| PR libfortran/20156 |
| PR libfortran/20471 |
| * io/backspace.c (unformatted_backspace): Fix error in arithmetic. |
| (st_backspace): When in WRITING mode, we flush and falling back |
| into READING mode. In all cases, correctly position the stream. |
| |
| 2005-03-31 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/20660 |
| * io/inquire.c (inquire_via_unit): Non-opened units should still be |
| reported by an INQUIRE statement as existing. |
| * io/transfer.c (data_transfer_init): Never accept negative units. |
| |
| 2005-03-29 Dale Ranta <dir@lanl.gov> |
| Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/20163 |
| * io/open.c (st_open): call library_end() before returning even if |
| an error arises. |
| |
| 2005-03-25 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/19678 |
| * list_read.c (next_char, eat_separator, finish_separator, read_real) |
| (namelist_read): Add support for '\r' as well as '\n' as EOL |
| character. |
| |
| PR libfortran/19679 |
| * list_read.c (read_sf): Add a '\r' in a test to support DOS |
| line-endings when line length is exceeded. |
| |
| 2005-03-25 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/15332 |
| * io/format.c (parse_format_list): format node for colon edit |
| descriptor needs a repeat counter set to 1. |
| |
| 2005-02-24 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * config.h.in: Regenerate. |
| |
| 2005-02-23 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/18025 |
| * write.c (output_float): Handling the "F0.d" format similarly as |
| commercial compilers. |
| |
| 2005-03-22 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| * Makefile.am: Added new files. |
| * Makefile.in: Regenerate. |
| * aclocal.m4: Regenerate. |
| * configure.ac: add checks for signal.h headers file, as well as |
| following functions: chdir, strerror, getlogin, gethostname, kill, |
| link, symlink, perror, sleep, time. |
| * configure: Regenerate. |
| * intrinsics/chdir.c, intrinsics/gerror.c, intrinsics/getlog.c, |
| intrinsics/hostnm.c, intrinsics/ierrno.c, intrinsics/kill.c, |
| intrinsics/link.c, intrinsics/perror.c, intrinsics/rename.c, |
| intrinsics/sleep.c, intrinsics/symlnk.c, intrinsics/time.c: Newly |
| implementend g77 intrinsics. |
| |
| 2005-03-21 Zack Weinberg <zack@codesourcery.com> |
| |
| * configure.ac: Do not invoke TL_AC_GCC_VERSION. |
| In all substitutions, leave gcc_version to be expanded by the Makefile. |
| * aclocal.m4, configure: Regenerate. |
| * Makefile.am: Set gcc_version. |
| * Makefile.in: Regenerate. |
| |
| 2005-03-16 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/20257 |
| * open.c (new_unit): set record length to max_offset rather than |
| using a hard-coded limit (which was too low). |
| |
| 2005-03-16 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/20480 |
| * write.c (output_float): special check when writing 0.0 with |
| EN and ES formats. |
| |
| 2005-03-11 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/20124 |
| * write.c (output_float): Adds a nzero_real variable to store |
| the number of leading zeros whatever the format width is. Corrects |
| the rounding of numbers less than 10^(-width). Fixes typo in an |
| error message. Updates copyright years |
| |
| 2005-02-27 Toon Moene <toon@moene.indiv.nluug.nl> |
| |
| * runtime/environ.c: Update copyright years. |
| |
| 2005-02-27 Tobias Schl"uter <tobias.schlueter@physik.uni-muenchen.de> |
| |
| * io/write.c: Update copyright years. |
| |
| 2005-02-27 Francois-Xavier Coudert <coudert@clipper.ens.fr> |
| |
| PR libfortran/20101 |
| * io/write.c (output_float): Added special check for value 0.0 in |
| PE format. |
| |
| 2005-02-27 Tobias Schl"uter <tobias.schlueter@physik.uni-muenchen.de> |
| |
| * io/write.c (output_float): Fix typo in condition. |
| |
| 2005-02-25 Peter O'Gorman <peter@pogma.com> |
| Toon Moene <toon@moene.indiv.nluug.nl> |
| |
| PR libfortran/17748 |
| * runtime/environ.c: Remove references to environ. |
| (show_variables): remove GFORTRAN_UNBUFFERED_* and |
| GFORTRAN_NAME_* because they require environ. |
| (pattern_scan): Remove function. |
| |
| 2005-02-22 Paul Thomas <paulthomas2@wannado.fr> |
| Bud Davis <bdavis@gfortran.org> |
| |
| * io/list_read.c (read_real): Handle separators properly |
| in list directed read. |
| |
| 2005-02-21 Bud Davis <bdavis@gfortran.org> |
| |
| PR fortran/20086 |
| * io/transfer.c (write_constant_string): accept an 'h' as |
| the start of a hollerith format string. |
| |
| 2005-02-21 Eric Botcazou <ebotcazou@libertysurf.fr> |
| |
| PR libfortran/19302 |
| * intrinsics/c99_functions.c (nextafterf): Special-case infinite |
| numbers. |
| |
| 2005-02-21 Steven G. Kargl <kargls@comcast.net> |
| |
| * io/write.c (output_float): Typo in error meesage. |
| |
| 2005-02-20 Steven G. Kargl <kargls@comcast.net> |
| |
| PR 20085 |
| * intrinsic/args.c (iargc): Off by 1. |
| |
| 2005-02-19 Steven G. Kargl <kargls@comcast.net> |
| |
| * intrinsic/date_and_time.c: Fix conformance problems. |
| |
| 2005-02-01 Paul Thomas <paulthomas2@wanadoo.fr> |
| |
| PR libfortran/19363 |
| PR libfortran/19691 |
| * libgfortran.h (isfinite): Work around broken isfinite(x) in Cygwin. |
| |
| 2005-01-30 Bud Davis <bdavis@gfortran.org> |
| |
| PR fortran/19647 |
| * io/inquire.c (inquire_via_unit): Use correct variable for |
| pad. |
| |
| 2005-01-29 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/19595 |
| * io/transfer.c (data_transfer_init): eor requires advance="NO". |
| |
| 2005-01-25 Tobias Schl"uter <tobias.schlueter@physik.uni-muenchen.de> |
| |
| PR libfortran/19524 |
| * io/read.c (read_f): Don't free uninitialized pointer. |
| |
| 2005-01-23 James A. Morrison <phython@gcc.gnu.org> |
| Paul Brook <paul@codesourcery.com> |
| |
| PR fortran/19294 |
| * Makefile.am: Add transpose_c4.c and transpose_c8.c. |
| * intrinsics/cshift0.c: Use separate optimized loops for complex types. |
| * m4/transpose.m4: Include type letter in function name. |
| * Makefile.in: Regenerate. |
| * generated/transpose_*.c: Regenerate. |
| |
| 2005-01-22 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/19451 |
| * io/transfer.c (finalize_transfer): Don't do anything if |
| there is an error condition. |
| |
| 2005-01-22 David Edelsohn <edelsohn@gnu.org> |
| |
| PR libfortran/19052 |
| * libgfortran.h (options_t): Add stderr_unit. |
| * io/io.h (error_stream): Declare. |
| * io/open.c (new_unit): Do not terminate abnormally if opening |
| file preconnected to stdin, stdout, or stderr. |
| * io/unit.c (init_units): Initialize stderr_unit. |
| * io/unix.c (error_stream): New function. |
| * runtime/environ.c (GFORTRAN_STDERR_UNIT): New environment variable. |
| |
| 2005-01-22 Thomas Koenig <Thomas.Koenig@online.de> |
| |
| PR libfortran/18982 |
| * io/unix.c (regular_file): No need to change flags->action |
| if an error occurs. Document this. |
| No need to call stat() for STATUS_OLD, open() will |
| fail anyway. |
| For ACTION_UNSPECIFIED, try open for read-write, then for |
| read-only if open fails with EACCES, then for write-only |
| if that fails with EACCES again. |
| * io/unix.c (open_external): Document changed behavior of |
| regular_file. |
| |
| 2005-01-22 Tobias Schl"uter <tobias.schlueter@physik.uni-muenchen.de> |
| |
| PR fortran/19194 |
| * io/io.h (st_parameter): Use 'GFC_INTEGER_4' instead of 'int', |
| use CHARACTER macro for definition of string valued paramters. |
| |
| 2005-01-22 Bud Davis <bdavis9659@comcast.net> |
| |
| PR fortran/19314 |
| * io/inquire.c(inquire_via_unit): implement POSITION=. |
| * io/transfer.c(next_record): update position for |
| INQUIRE. |
| * io/rewind.c(st_rewind): update position for |
| INQUIRE. |
| |
| 2005-01-16 Bud Davis <bdavis9659@comcast.net> |
| |
| PR fortran/18778 |
| * io/transfer.c (us_read): no bytes available is not a |
| runtime error. |
| |
| 2005-01-15 Bud Davis <bdavis9659@comcast.net> |
| |
| PR fortran/18983 |
| * io/transfer.c (st_write_done): only truncate when it |
| is required. |
| |
| 2005-01-12 Toon Moene <toon@moene.indiv.nluug.nl> |
| |
| PR libfortran/19280 |
| c99_protos.h: License changed to GPL+exception. |
| libgfortran.h: Ditto. |
| intrinsics/abort.c: Ditto. |
| intrinsics/args.c: Ditto. |
| intrinsics/associated.c: Ditto. |
| intrinsics/bessel.c: Ditto. |
| intrinsics/c99_functions.c: Ditto. |
| intrinsics/cpu_time.c: Ditto. |
| intrinsics/cshift0.c: Ditto. |
| intrinsics/date_and_time.c: Ditto. |
| intrinsics/env.c: Ditto. |
| intrinsics/eoshift0.c: Ditto. |
| intrinsics/eoshift2.c: Ditto. |
| intrinsics/erf.c: Ditto. |
| intrinsics/etime.c: Ditto. |
| intrinsics/exit.c: Ditto. |
| intrinsics/flush.c: Ditto. |
| intrinsics/fnum.c: Ditto. |
| intrinsics/getXid.c: Ditto. |
| intrinsics/getcwd.c: Ditto. |
| intrinsics/ishftc.c: Ditto. |
| intrinsics/mvbits.c: Ditto. |
| intrinsics/pack_generic.c: Ditto. |
| intrinsics/rand.c: Ditto. |
| intrinsics/random.c: Ditto. |
| intrinsics/reshape_generic.c: Ditto. |
| intrinsics/reshape_packed.c: Ditto. |
| intrinsics/size.c: Ditto. |
| intrinsics/spread_generic.c: Ditto. |
| intrinsics/stat.c: Ditto. |
| intrinsics/string_intrinsics.c: Ditto. |
| intrinsics/system.c: Ditto. |
| intrinsics/system_clock.c: Ditto. |
| intrinsics/transpose_generic.c: Ditto. |
| intrinsics/umask.c: Ditto. |
| intrinsics/unlink.c: Ditto. |
| intrinsics/unpack_generic.c: Ditto. |
| io/backspace.c: Ditto. |
| io/close.c: Ditto. |
| io/endfile.c: Ditto. |
| io/format.c: Ditto. |
| io/inquire.c: Ditto. |
| io/io.h: Ditto. |
| io/list_read.c: Ditto. |
| io/lock.c: Ditto. |
| io/open.c: Ditto. |
| io/read.c: Ditto. |
| io/rewind.c: Ditto. |
| io/transfer.c: Ditto. |
| io/unit.c: Ditto. |
| io/unix.c: Ditto. |
| io/write.c: Ditto. |
| m4/all.m4: Ditto. |
| m4/any.m4: Ditto. |
| m4/cexp.m4: Ditto. |
| m4/chyp.m4: Ditto. |
| m4/count.m4: Ditto. |
| m4/cshift1.m4: Ditto. |
| m4/ctrig.m4: Ditto. |
| m4/dotprod.m4: Ditto. |
| m4/dotprodc.m4: Ditto. |
| m4/dotprodl.m4: Ditto. |
| m4/eoshift1.m4: Ditto. |
| m4/eoshift3.m4: Ditto. |
| m4/exponent.m4: Ditto. |
| m4/fraction.m4: Ditto. |
| m4/head.m4: Ditto. |
| m4/iforeach.m4: Ditto. |
| m4/ifunction.m4: Ditto. |
| m4/in_pack.m4: Ditto. |
| m4/in_unpack.m4: Ditto. |
| m4/iparm.m4: Ditto. |
| m4/matmul.m4: Ditto. |
| m4/matmull.m4: Ditto. |
| m4/maxloc0.m4: Ditto. |
| m4/maxloc1.m4: Ditto. |
| m4/maxval.m4: Ditto. |
| m4/minloc0.m4: Ditto. |
| m4/minloc1.m4: Ditto. |
| m4/minval.m4: Ditto. |
| m4/mtype.m4: Ditto. |
| m4/nearest.m4: Ditto. |
| m4/pow.m4: Ditto. |
| m4/product.m4: Ditto. |
| m4/reshape.m4: Ditto. |
| m4/set_exponent.m4: Ditto. |
| m4/shape.m4: Ditto. |
| m4/specific.m4: Ditto. |
| m4/specific2.m4: Ditto. |
| m4/sum.m4: Ditto. |
| m4/transpose.m4: Ditto. |
| m4/types.m4: Ditto. |
| runtime/environ.c: Ditto. |
| runtime/error.c: Ditto. |
| runtime/in_pack_generic.c: Ditto. |
| runtime/in_unpack_generic.c: Ditto. |
| runtime/main.c: Ditto. |
| runtime/memory.c: Ditto. |
| runtime/normalize.c: Ditto. |
| runtime/pause.c: Ditto. |
| runtime/select.c: Ditto. |
| runtime/stop.c: Ditto. |
| runtime/string.c: Ditto. |
| generated/_abs_c4.f90: Regenerated. |
| generated/_abs_c8.f90: Regenerated. |
| generated/_abs_i4.f90: Regenerated. |
| generated/_abs_i8.f90: Regenerated. |
| generated/_abs_r4.f90: Regenerated. |
| generated/_abs_r8.f90: Regenerated. |
| generated/_acos_r4.f90: Regenerated. |
| generated/_acos_r8.f90: Regenerated. |
| generated/_aint_r4.f90: Regenerated. |
| generated/_aint_r8.f90: Regenerated. |
| generated/_anint_r4.f90: Regenerated. |
| generated/_anint_r8.f90: Regenerated. |
| generated/_asin_r4.f90: Regenerated. |
| generated/_asin_r8.f90: Regenerated. |
| generated/_atan2_r4.f90: Regenerated. |
| generated/_atan2_r8.f90: Regenerated. |
| generated/_atan_r4.f90: Regenerated. |
| generated/_atan_r8.f90: Regenerated. |
| generated/_conjg_c4.f90: Regenerated. |
| generated/_conjg_c8.f90: Regenerated. |
| generated/_cos_c4.f90: Regenerated. |
| generated/_cos_c8.f90: Regenerated. |
| generated/_cos_r4.f90: Regenerated. |
| generated/_cos_r8.f90: Regenerated. |
| generated/_cosh_r4.f90: Regenerated. |
| generated/_cosh_r8.f90: Regenerated. |
| generated/_dim_i4.f90: Regenerated. |
| generated/_dim_i8.f90: Regenerated. |
| generated/_dim_r4.f90: Regenerated. |
| generated/_dim_r8.f90: Regenerated. |
| generated/_exp_c4.f90: Regenerated. |
| generated/_exp_c8.f90: Regenerated. |
| generated/_exp_r4.f90: Regenerated. |
| generated/_exp_r8.f90: Regenerated. |
| generated/_log10_r4.f90: Regenerated. |
| generated/_log10_r8.f90: Regenerated. |
| generated/_log_c4.f90: Regenerated. |
| generated/_log_c8.f90: Regenerated. |
| generated/_log_r4.f90: Regenerated. |
| generated/_log_r8.f90: Regenerated. |
| generated/_mod_i4.f90: Regenerated. |
| generated/_mod_i8.f90: Regenerated. |
| generated/_mod_r4.f90: Regenerated. |
| generated/_mod_r8.f90: Regenerated. |
| generated/_sign_i4.f90: Regenerated. |
| generated/_sign_i8.f90: Regenerated. |
| generated/_sign_r4.f90: Regenerated. |
| generated/_sign_r8.f90: Regenerated. |
| generated/_sin_c4.f90: Regenerated. |
| generated/_sin_c8.f90: Regenerated. |
| generated/_sin_r4.f90: Regenerated. |
| generated/_sin_r8.f90: Regenerated. |
| generated/_sinh_r4.f90: Regenerated. |
| generated/_sinh_r8.f90: Regenerated. |
| generated/_sqrt_c4.f90: Regenerated. |
| generated/_sqrt_c8.f90: Regenerated. |
| generated/_sqrt_r4.f90: Regenerated. |
| generated/_sqrt_r8.f90: Regenerated. |
| generated/_tan_r4.f90: Regenerated. |
| generated/_tan_r8.f90: Regenerated. |
| generated/_tanh_r4.f90: Regenerated. |
| generated/_tanh_r8.f90: Regenerated. |
| generated/all_l4.c: Regenerated. |
| generated/all_l8.c: Regenerated. |
| generated/any_l4.c: Regenerated. |
| generated/any_l8.c: Regenerated. |
| generated/count_4_l4.c: Regenerated. |
| generated/count_4_l8.c: Regenerated. |
| generated/count_8_l4.c: Regenerated. |
| generated/count_8_l8.c: Regenerated. |
| generated/cshift1_4.c: Regenerated. |
| generated/cshift1_8.c: Regenerated. |
| generated/dotprod_c4.c: Regenerated. |
| generated/dotprod_c8.c: Regenerated. |
| generated/dotprod_i4.c: Regenerated. |
| generated/dotprod_i8.c: Regenerated. |
| generated/dotprod_l4.c: Regenerated. |
| generated/dotprod_l8.c: Regenerated. |
| generated/dotprod_r4.c: Regenerated. |
| generated/dotprod_r8.c: Regenerated. |
| generated/eoshift1_4.c: Regenerated. |
| generated/eoshift1_8.c: Regenerated. |
| generated/eoshift3_4.c: Regenerated. |
| generated/eoshift3_8.c: Regenerated. |
| generated/exp_c4.c: Regenerated. |
| generated/exp_c8.c: Regenerated. |
| generated/exponent_r4.c: Regenerated. |
| generated/exponent_r8.c: Regenerated. |
| generated/fraction_r4.c: Regenerated. |
| generated/fraction_r8.c: Regenerated. |
| generated/hyp_c4.c: Regenerated. |
| generated/hyp_c8.c: Regenerated. |
| generated/in_pack_i4.c: Regenerated. |
| generated/in_pack_i8.c: Regenerated. |
| generated/in_unpack_i4.c: Regenerated. |
| generated/in_unpack_i8.c: Regenerated. |
| generated/matmul_c4.c: Regenerated. |
| generated/matmul_c8.c: Regenerated. |
| generated/matmul_i4.c: Regenerated. |
| generated/matmul_i8.c: Regenerated. |
| generated/matmul_l4.c: Regenerated. |
| generated/matmul_l8.c: Regenerated. |
| generated/matmul_r4.c: Regenerated. |
| generated/matmul_r8.c: Regenerated. |
| generated/maxloc0_4_i4.c: Regenerated. |
| generated/maxloc0_4_i8.c: Regenerated. |
| generated/maxloc0_4_r4.c: Regenerated. |
| generated/maxloc0_4_r8.c: Regenerated. |
| generated/maxloc0_8_i4.c: Regenerated. |
| generated/maxloc0_8_i8.c: Regenerated. |
| generated/maxloc0_8_r4.c: Regenerated. |
| generated/maxloc0_8_r8.c: Regenerated. |
| generated/maxloc1_4_i4.c: Regenerated. |
| generated/maxloc1_4_i8.c: Regenerated. |
| generated/maxloc1_4_r4.c: Regenerated. |
| generated/maxloc1_4_r8.c: Regenerated. |
| generated/maxloc1_8_i4.c: Regenerated. |
| generated/maxloc1_8_i8.c: Regenerated. |
| generated/maxloc1_8_r4.c: Regenerated. |
| generated/maxloc1_8_r8.c: Regenerated. |
| generated/maxval_i4.c: Regenerated. |
| generated/maxval_i8.c: Regenerated. |
| generated/maxval_r4.c: Regenerated. |
| generated/maxval_r8.c: Regenerated. |
| generated/minloc0_4_i4.c: Regenerated. |
| generated/minloc0_4_i8.c: Regenerated. |
| generated/minloc0_4_r4.c: Regenerated. |
| generated/minloc0_4_r8.c: Regenerated. |
| generated/minloc0_8_i4.c: Regenerated. |
| generated/minloc0_8_i8.c: Regenerated. |
| generated/minloc0_8_r4.c: Regenerated. |
| generated/minloc0_8_r8.c: Regenerated. |
| generated/minloc1_4_i4.c: Regenerated. |
| generated/minloc1_4_i8.c: Regenerated. |
| generated/minloc1_4_r4.c: Regenerated. |
| generated/minloc1_4_r8.c: Regenerated. |
| generated/minloc1_8_i4.c: Regenerated. |
| generated/minloc1_8_i8.c: Regenerated. |
| generated/minloc1_8_r4.c: Regenerated. |
| generated/minloc1_8_r8.c: Regenerated. |
| generated/minval_i4.c: Regenerated. |
| generated/minval_i8.c: Regenerated. |
| generated/minval_r4.c: Regenerated. |
| generated/minval_r8.c: Regenerated. |
| generated/nearest_r4.c: Regenerated. |
| generated/nearest_r8.c: Regenerated. |
| generated/pow_c4_i4.c: Regenerated. |
| generated/pow_c4_i8.c: Regenerated. |
| generated/pow_c8_i4.c: Regenerated. |
| generated/pow_c8_i8.c: Regenerated. |
| generated/pow_i4_i4.c: Regenerated. |
| generated/pow_i4_i8.c: Regenerated. |
| generated/pow_i8_i4.c: Regenerated. |
| generated/pow_i8_i8.c: Regenerated. |
| generated/pow_r4_i4.c: Regenerated. |
| generated/pow_r4_i8.c: Regenerated. |
| generated/pow_r8_i4.c: Regenerated. |
| generated/pow_r8_i8.c: Regenerated. |
| generated/product_c4.c: Regenerated. |
| generated/product_c8.c: Regenerated. |
| generated/product_i4.c: Regenerated. |
| generated/product_i8.c: Regenerated. |
| generated/product_r4.c: Regenerated. |
| generated/product_r8.c: Regenerated. |
| generated/reshape_i4.c: Regenerated. |
| generated/reshape_i8.c: Regenerated. |
| generated/set_exponent_r4.c: Regenerated. |
| generated/set_exponent_r8.c: Regenerated. |
| generated/shape_i4.c: Regenerated. |
| generated/shape_i8.c: Regenerated. |
| generated/sum_c4.c: Regenerated. |
| generated/sum_c8.c: Regenerated. |
| generated/sum_i4.c: Regenerated. |
| generated/sum_i8.c: Regenerated. |
| generated/sum_r4.c: Regenerated. |
| generated/sum_r8.c: Regenerated. |
| generated/transpose_i4.c: Regenerated. |
| generated/transpose_i8.c: Regenerated. |
| generated/trig_c4.c: Regenerated. |
| generated/trig_c8.c: Regenerated. |
| |
| 2005-01-07 Bud Davis <bdavis9659@comcast.net> |
| |
| PR fortran/18398 |
| * transfer.c (next_record_r): always skip the |
| eol search if it was found during sf_read. |
| |
| |
| Copyright (C) 2005 Free Software Foundation, Inc. |
| |
| Copying and distribution of this file, with or without modification, |
| are permitted in any medium without royalty provided the copyright |
| notice and this notice are preserved. |
