blob: c568b843bf66d6b2619caadda491fb27b3ce1a1c [file] [log] [blame]
-- C45651A.ADA
-- Grant of Unlimited Rights
--
-- Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687,
-- F08630-91-C-0015, and DCA100-97-D-0025, the U.S. Government obtained
-- unlimited rights in the software and documentation contained herein.
-- Unlimited rights are defined in DFAR 252.227-7013(a)(19). By making
-- this public release, the Government intends to confer upon all
-- recipients unlimited rights equal to those held by the Government.
-- These rights include rights to use, duplicate, release or disclose the
-- released technical data and computer software in whole or in part, in
-- any manner and for any purpose whatsoever, and to have or permit others
-- to do so.
--
-- DISCLAIMER
--
-- ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR
-- DISCLOSED ARE AS IS. THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED
-- WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE
-- SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE
-- OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A
-- PARTICULAR PURPOSE OF SAID MATERIAL.
--*
-- OBJECTIVE:
-- FOR FIXED POINT TYPES, CHECK:
-- (A) FOR MODEL NUMBERS A >= 0.0, THAT ABS A = A.
-- (B) FOR MODEL NUMBERS A <= 0.0. THAT ABS A = -A.
-- (C) FOR NON-MODEL NUMBERS A > 0.0, THAT ABS A VALUES ARE
-- WITHIN THE APPROPRIATE MODEL INTERVAL.
-- (D) FOR NON-MODEL NUMBERS A < 0.0, THAT ABS A VALUES ARE
-- WITHIN THE APPROPRIATE MODEL INTERVAL.
-- CASE A: BASIC TYPES THAT FIT THE CHARACTERISTICS OF
-- DURATION'BASE.
-- HISTORY:
-- WRG 9/11/86
-- PWB 3/31/88 CHANGED RANGE FOR MEMBERSHIP TEST INVOLVING
-- ABS (DECIMAL_M4'FIRST + DECIMAL_M4'SMALL / 2).
-- RJW 8/21/89 REMOVED CHECKS INVOLVING HARD-CODED FIXED-POINT
-- UPPER BOUNDS WHICH WERE INCORRECT FOR SOME
-- IMPLEMENTATIONS. REVISED HEADER.
-- PWN 02/02/95 REMOVED INCONSISTENCIES WITH ADA 9X.
-- KAS 11/14/95 REMOVED CASES THAT DEPEND ON SPECIFIC VALUE FOR 'SMALL
-- TMB 11/19/94 REMOVED CASES RELATING TO 3.5.9(8) RULES - SMALL
-- MAY BE LESS THAN OR EQUAL TO DELTA FOR FIXED POINT.
WITH REPORT; USE REPORT;
PROCEDURE C45651A IS
-- THE NAME OF EACH TYPE OR SUBTYPE ENDS WITH THAT TYPE'S
-- 'MANTISSA VALUE.
BEGIN
TEST ("C45651A", "CHECK THAT, FOR FIXED POINT TYPES, THE ABS " &
"OPERATOR PRODUCES CORRECT RESULTS - BASIC " &
"TYPES");
-------------------------------------------------------------------
A: DECLARE
TYPE LIKE_DURATION_M23 IS DELTA 0.020
RANGE -86_400.0 .. 86_400.0;
NON_MODEL_CONST : CONSTANT := 2.0 / 3;
NON_MODEL_VAR : LIKE_DURATION_M23 := 0.0;
SMALL, MAX, MIN, ZERO : LIKE_DURATION_M23 := 0.5;
X : LIKE_DURATION_M23 := 1.0;
BEGIN
-- INITIALIZE "CONSTANTS":
IF EQUAL (3, 3) THEN
SMALL := LIKE_DURATION_M23'SMALL;
MAX := LIKE_DURATION_M23'LAST;
MIN := LIKE_DURATION_M23'FIRST;
ZERO := 0.0;
NON_MODEL_VAR := NON_MODEL_CONST;
END IF;
-- (A)
IF EQUAL (3, 3) THEN
X := SMALL;
END IF;
IF ABS X /= SMALL OR X /= ABS LIKE_DURATION_M23'SMALL THEN
FAILED ("ABS (1.0 / 64) /= (1.0 / 64)");
END IF;
IF EQUAL (3, 3) THEN
X := MAX;
END IF;
IF ABS X /= MAX OR X /= ABS LIKE_DURATION_M23'LAST THEN
FAILED ("ABS 86_400.0 /= 86_400.0");
END IF;
-- (B)
IF EQUAL (3, 3) THEN
X := -SMALL;
END IF;
IF ABS X /= SMALL OR
ABS (-LIKE_DURATION_M23'SMALL) /= SMALL THEN
FAILED ("ABS -(1.0 / 64) /= (1.0 / 64)");
END IF;
IF EQUAL (3, 3) THEN
X := MIN;
END IF;
IF ABS X /= MAX OR ABS LIKE_DURATION_M23'FIRST /= MAX THEN
FAILED ("ABS -86_400.0 /= 86_400.0");
END IF;
-- (A) AND (B)
IF EQUAL (3, 3) THEN
X := 0.0;
END IF;
IF "ABS" (RIGHT => X) /= ZERO OR X /= ABS 0.0 THEN
FAILED ("ABS 0.0 /= 0.0 -- (LIKE_DURATION_M23)");
END IF;
-- CHECK THAT VALUE OF NON_MODEL_VAR IS IN THE RANGE
-- 42 * 'SMALL .. 43 * 'SMALL:
IF NON_MODEL_VAR NOT IN 0.65625 .. 0.671875 THEN
FAILED ("VALUE OF NON_MODEL_VAR NOT IN CORRECT RANGE " &
"- A");
END IF;
-- (C)
IF ABS NON_MODEL_VAR NOT IN 0.65625 .. 0.671875 OR
ABS LIKE_DURATION_M23'(NON_MODEL_CONST) NOT IN
0.65625 .. 0.671875 THEN
FAILED ("ABS (2.0 / 3) NOT IN CORRECT RANGE - A");
END IF;
IF EQUAL (3, 3) THEN
X := 86_399.992_187_5; -- LIKE_DURATION_M23'LAST -
-- 1.0 / 128.
END IF;
IF ABS X NOT IN 86_399.984_375 .. 86_400.0 OR
ABS (LIKE_DURATION_M23'LAST - LIKE_DURATION_M23'SMALL / 2)
NOT IN 86_399.984_375 .. 86_400.0 THEN
FAILED ("ABS (LIKE_DURATION_M23'LAST - " &
"LIKE_DURATION_M23'SMALL / 2) NOT IN CORRECT " &
"RANGE");
END IF;
-- (D)
IF EQUAL (3, 3) THEN
X := -NON_MODEL_CONST;
END IF;
IF ABS X NOT IN 0.65625 .. 0.671875 OR
ABS (-LIKE_DURATION_M23'(NON_MODEL_CONST)) NOT IN
0.65625 .. 0.671875 THEN
FAILED ("ABS (-2.0 / 3) NOT IN CORRECT RANGE - A");
END IF;
IF EQUAL (3, 3) THEN
X := -86_399.992_187_5; -- LIKE_DURATION_M23'FIRST +
-- 1.0 / 128.
END IF;
IF ABS X NOT IN 86_399.984_375 .. 86_400.0 OR
ABS (LIKE_DURATION_M23'FIRST + LIKE_DURATION_M23'SMALL / 2)
NOT IN 86_399.984_375 .. 86_400.0 THEN
FAILED ("ABS (LIKE_DURATION_M23'FIRST +" &
"LIKE_DURATION_M23'SMALL / 2) NOT IN CORRECT " &
"RANGE");
END IF;
END A;
-------------------------------------------------------------------
B: DECLARE
TYPE DECIMAL_M4 IS DELTA 100.0 RANGE -1000.0 .. 1000.0;
NON_MODEL_CONST : CONSTANT := 2.0 / 3;
NON_MODEL_VAR : DECIMAL_M4 := 0.0;
SMALL, MAX, MIN, ZERO : DECIMAL_M4 := 128.0;
X : DECIMAL_M4 := 0.0;
BEGIN
-- INITIALIZE "CONSTANTS":
IF EQUAL (3, 3) THEN
SMALL := DECIMAL_M4'SMALL;
ZERO := 0.0;
NON_MODEL_VAR := NON_MODEL_CONST;
END IF;
-- (A)
IF EQUAL (3, 3) THEN
X := SMALL;
END IF;
IF ABS X /= SMALL OR X /= ABS DECIMAL_M4'SMALL THEN
FAILED ("ABS 64.0 /= 64.0");
END IF;
-- (B)
IF EQUAL (3, 3) THEN
X := -SMALL;
END IF;
IF ABS X /= SMALL OR ABS (-DECIMAL_M4'SMALL) /= SMALL THEN
FAILED ("ABS -64.0 /= 64.0");
END IF;
-- (A) AND (B)
IF EQUAL (3, 3) THEN
X := 0.0;
END IF;
IF ABS X /= ZERO OR X /= ABS 0.0 THEN
FAILED ("ABS 0.0 /= 0.0 -- (DECIMAL_M4)");
END IF;
-- CHECK THE VALUE OF NON_MODEL_VAR:
IF NON_MODEL_VAR NOT IN 0.0 .. 64.0 THEN
FAILED ("VALUE OF NON_MODEL_VAR NOT IN CORRECT RANGE " &
"- B");
END IF;
-- (C)
IF ABS NON_MODEL_VAR NOT IN 0.0 .. 64.0 OR
ABS DECIMAL_M4'(NON_MODEL_CONST) NOT IN 0.0 .. 64.0 THEN
FAILED ("ABS (2.0 / 3) NOT IN CORRECT RANGE - B");
END IF;
IF EQUAL (3, 3) THEN
X := 37.0; -- INTERVAL IS 0.0 .. 64.0.
END IF;
IF EQUAL (3, 3) THEN
X := 928.0;
END IF;
-- (D)
IF EQUAL (3, 3) THEN
X := -NON_MODEL_CONST;
END IF;
IF ABS X NOT IN 0.0 .. 64.0 OR
ABS (-DECIMAL_M4'(NON_MODEL_CONST)) NOT IN 0.0 .. 64.0 THEN
FAILED ("ABS -(2.0 / 3) NOT IN CORRECT RANGE - B");
END IF;
IF EQUAL (3, 3) THEN
X := -37.0; -- INTERVAL IS -SMALL .. 0.0.
END IF;
IF EQUAL (3, 3) THEN
X := -928.0;
END IF;
END B;
-------------------------------------------------------------------
RESULT;
END C45651A;