| # Makefile.in generated by automake 1.7.8 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
| # Free Software Foundation, Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| srcdir = @srcdir@ |
| top_srcdir = @top_srcdir@ |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| top_builddir = . |
| |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| INSTALL = @INSTALL@ |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| target_triplet = @target@ |
| ACLOCAL = @ACLOCAL@ |
| ALLOCATOR_H = @ALLOCATOR_H@ |
| ALLOCATOR_NAME = @ALLOCATOR_NAME@ |
| AMTAR = @AMTAR@ |
| AR = @AR@ |
| AS = @AS@ |
| ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@ |
| ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| BASIC_FILE_CC = @BASIC_FILE_CC@ |
| BASIC_FILE_H = @BASIC_FILE_H@ |
| CC = @CC@ |
| CCODECVT_CC = @CCODECVT_CC@ |
| CCODECVT_H = @CCODECVT_H@ |
| CCOLLATE_CC = @CCOLLATE_CC@ |
| CCTYPE_CC = @CCTYPE_CC@ |
| CFLAGS = @CFLAGS@ |
| CLOCALE_CC = @CLOCALE_CC@ |
| CLOCALE_H = @CLOCALE_H@ |
| CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@ |
| CMESSAGES_CC = @CMESSAGES_CC@ |
| CMESSAGES_H = @CMESSAGES_H@ |
| CMONEY_CC = @CMONEY_CC@ |
| CNUMERIC_CC = @CNUMERIC_CC@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CSTDIO_H = @CSTDIO_H@ |
| CTIME_CC = @CTIME_CC@ |
| CTIME_H = @CTIME_H@ |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| CXXFLAGS = @CXXFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| C_INCLUDE_DIR = @C_INCLUDE_DIR@ |
| DEBUG_FLAGS = @DEBUG_FLAGS@ |
| DEFS = @DEFS@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@ |
| GLIBCXX_BUILD_DEBUG_FALSE = @GLIBCXX_BUILD_DEBUG_FALSE@ |
| GLIBCXX_BUILD_DEBUG_TRUE = @GLIBCXX_BUILD_DEBUG_TRUE@ |
| GLIBCXX_BUILD_PCH_FALSE = @GLIBCXX_BUILD_PCH_FALSE@ |
| GLIBCXX_BUILD_PCH_TRUE = @GLIBCXX_BUILD_PCH_TRUE@ |
| GLIBCXX_BUILD_VERSIONED_SHLIB_FALSE = @GLIBCXX_BUILD_VERSIONED_SHLIB_FALSE@ |
| GLIBCXX_BUILD_VERSIONED_SHLIB_TRUE = @GLIBCXX_BUILD_VERSIONED_SHLIB_TRUE@ |
| GLIBCXX_C_HEADERS_COMPATIBILITY_FALSE = @GLIBCXX_C_HEADERS_COMPATIBILITY_FALSE@ |
| GLIBCXX_C_HEADERS_COMPATIBILITY_TRUE = @GLIBCXX_C_HEADERS_COMPATIBILITY_TRUE@ |
| GLIBCXX_C_HEADERS_C_FALSE = @GLIBCXX_C_HEADERS_C_FALSE@ |
| GLIBCXX_C_HEADERS_C_STD_FALSE = @GLIBCXX_C_HEADERS_C_STD_FALSE@ |
| GLIBCXX_C_HEADERS_C_STD_TRUE = @GLIBCXX_C_HEADERS_C_STD_TRUE@ |
| GLIBCXX_C_HEADERS_C_TRUE = @GLIBCXX_C_HEADERS_C_TRUE@ |
| GLIBCXX_HOSTED_FALSE = @GLIBCXX_HOSTED_FALSE@ |
| GLIBCXX_HOSTED_TRUE = @GLIBCXX_HOSTED_TRUE@ |
| GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@ |
| GLIBCXX_TEST_ABI_FALSE = @GLIBCXX_TEST_ABI_FALSE@ |
| GLIBCXX_TEST_ABI_TRUE = @GLIBCXX_TEST_ABI_TRUE@ |
| GLIBCXX_TEST_WCHAR_T_FALSE = @GLIBCXX_TEST_WCHAR_T_FALSE@ |
| GLIBCXX_TEST_WCHAR_T_TRUE = @GLIBCXX_TEST_WCHAR_T_TRUE@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| LIBMATHOBJS = @LIBMATHOBJS@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBSUPCXX_PICFLAGS = @LIBSUPCXX_PICFLAGS@ |
| LIBTOOL = @LIBTOOL@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAINT = @MAINT@ |
| MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ |
| MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ |
| MAKEINFO = @MAKEINFO@ |
| OBJEXT = @OBJEXT@ |
| OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@ |
| OPT_LDFLAGS = @OPT_LDFLAGS@ |
| OS_INC_SRCDIR = @OS_INC_SRCDIR@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| RANLIB = @RANLIB@ |
| SECTION_FLAGS = @SECTION_FLAGS@ |
| SECTION_LDFLAGS = @SECTION_LDFLAGS@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| SYMVER_MAP = @SYMVER_MAP@ |
| TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@ |
| USE_NLS = @USE_NLS@ |
| VERSION = @VERSION@ |
| WARN_FLAGS = @WARN_FLAGS@ |
| WERROR = @WERROR@ |
| ac_ct_AR = @ac_ct_AR@ |
| ac_ct_AS = @ac_ct_AS@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_CXX = @ac_ct_CXX@ |
| ac_ct_RANLIB = @ac_ct_RANLIB@ |
| ac_ct_STRIP = @ac_ct_STRIP@ |
| am__leading_dot = @am__leading_dot@ |
| baseline_dir = @baseline_dir@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| check_msgfmt = @check_msgfmt@ |
| datadir = @datadir@ |
| enable_shared = @enable_shared@ |
| enable_static = @enable_static@ |
| exec_prefix = @exec_prefix@ |
| glibcxx_MOFILES = @glibcxx_MOFILES@ |
| glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@ |
| glibcxx_POFILES = @glibcxx_POFILES@ |
| glibcxx_builddir = @glibcxx_builddir@ |
| glibcxx_localedir = @glibcxx_localedir@ |
| glibcxx_prefixdir = @glibcxx_prefixdir@ |
| glibcxx_srcdir = @glibcxx_srcdir@ |
| glibcxx_thread_h = @glibcxx_thread_h@ |
| glibcxx_toolexecdir = @glibcxx_toolexecdir@ |
| glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@ |
| gxx_include_dir = @gxx_include_dir@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| libtool_VERSION = @libtool_VERSION@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| multi_basedir = @multi_basedir@ |
| oldincludedir = @oldincludedir@ |
| port_specific_symbol_files = @port_specific_symbol_files@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| sysconfdir = @sysconfdir@ |
| target = @target@ |
| target_alias = @target_alias@ |
| target_cpu = @target_cpu@ |
| target_os = @target_os@ |
| target_vendor = @target_vendor@ |
| toplevel_srcdir = @toplevel_srcdir@ |
| |
| MAINT_CHARSET = latin1 |
| |
| mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs |
| PWD_COMMAND = $${PWDCMD-pwd} |
| STAMP = echo timestamp > |
| |
| toolexecdir = $(glibcxx_toolexecdir) |
| toolexeclibdir = $(glibcxx_toolexeclibdir) |
| |
| # These bits are all figured out from configure. Look in acinclude.m4 |
| # or configure.ac to see how they are set. See GLIBCXX_EXPORT_FLAGS. |
| CONFIG_CXXFLAGS = \ |
| $(SECTION_FLAGS) $(EXTRA_CXX_FLAGS) |
| |
| WARN_CXXFLAGS = \ |
| $(WARN_FLAGS) $(WERROR) -fdiagnostics-show-location=once |
| |
| |
| # -I/-D flags to pass when compiling. |
| AM_CPPFLAGS = $(GLIBCXX_INCLUDES) |
| @GLIBCXX_HOSTED_TRUE@hosted_source = src po |
| SUBDIRS = include libmath libsupc++ $(hosted_source) testsuite |
| |
| # Multilib support. |
| MAKEOVERRIDES = |
| |
| # Multilib support variables. |
| MULTISRCTOP = |
| MULTIBUILDTOP = |
| MULTIDIRS = |
| MULTISUBDIR = |
| MULTIDO = true |
| MULTICLEAN = true |
| |
| # Work around what appears to be a GNU make bug handling MAKEFLAGS |
| # values defined in terms of make variables, as is the case for CC and |
| # friends when we are called from the top level Makefile. |
| AM_MAKEFLAGS = \ |
| "AR_FLAGS=$(AR_FLAGS)" \ |
| "CC_FOR_BUILD=$(CC_FOR_BUILD)" \ |
| "CC_FOR_TARGET=$(CC_FOR_TARGET)" \ |
| "CFLAGS=$(CFLAGS)" \ |
| "CXXFLAGS=$(CXXFLAGS)" \ |
| "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \ |
| "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \ |
| "INSTALL=$(INSTALL)" \ |
| "INSTALL_DATA=$(INSTALL_DATA)" \ |
| "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ |
| "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \ |
| "LDFLAGS=$(LDFLAGS)" \ |
| "LIBCFLAGS=$(LIBCFLAGS)" \ |
| "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \ |
| "MAKE=$(MAKE)" \ |
| "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \ |
| "PICFLAG=$(PICFLAG)" \ |
| "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \ |
| "SHELL=$(SHELL)" \ |
| "RUNTESTFLAGS=$(RUNTESTFLAGS)" \ |
| "exec_prefix=$(exec_prefix)" \ |
| "infodir=$(infodir)" \ |
| "libdir=$(libdir)" \ |
| "includedir=$(includedir)" \ |
| "prefix=$(prefix)" \ |
| "tooldir=$(tooldir)" \ |
| "gxx_include_dir=$(gxx_include_dir)" \ |
| "AR=$(AR)" \ |
| "AS=$(AS)" \ |
| "LD=$(LD)" \ |
| "LIBCFLAGS=$(LIBCFLAGS)" \ |
| "PICFLAG=$(PICFLAG)" \ |
| "RANLIB=$(RANLIB)" \ |
| "NM=$(NM)" \ |
| "NM_FOR_BUILD=$(NM_FOR_BUILD)" \ |
| "NM_FOR_TARGET=$(NM_FOR_TARGET)" \ |
| "DESTDIR=$(DESTDIR)" \ |
| "WERROR=$(WERROR)" |
| |
| |
| # Subdir rules rely on $(FLAGS_TO_PASS) |
| FLAGS_TO_PASS = $(AM_MAKEFLAGS) |
| subdir = . |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| CONFIG_HEADER = config.h |
| CONFIG_CLEAN_FILES = scripts/check_survey scripts/testsuite_flags |
| depcomp = |
| am__depfiles_maybe = |
| DIST_SOURCES = |
| |
| RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \ |
| ps-recursive install-info-recursive uninstall-info-recursive \ |
| all-recursive install-data-recursive install-exec-recursive \ |
| installdirs-recursive install-recursive uninstall-recursive \ |
| check-recursive installcheck-recursive |
| DIST_COMMON = README $(srcdir)/Makefile.in $(srcdir)/configure \ |
| $(top_srcdir)/fragment.am ../ABOUT-NLS ../COPYING \ |
| ../COPYING.LIB ../ChangeLog ../README ../config.guess \ |
| ../config.rpath ../config.sub ../configure ../configure.in \ |
| ../install-sh ../ltcf-c.sh ../ltcf-cxx.sh ../ltcf-gcj.sh \ |
| ../ltconfig ../ltmain.sh ../missing ../mkinstalldirs ../ylwrap \ |
| ChangeLog Makefile.am acconfig.h acinclude.m4 aclocal.m4 \ |
| config.h.in configure configure.ac |
| DIST_SUBDIRS = include libmath libsupc++ src po testsuite |
| all: config.h |
| $(MAKE) $(AM_MAKEFLAGS) all-recursive |
| |
| .SUFFIXES: |
| |
| am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| configure.lineno |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/fragment.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) |
| cd $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign Makefile |
| Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status |
| cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe) |
| |
| $(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| $(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) |
| cd $(srcdir) && $(AUTOCONF) |
| |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.ac acinclude.m4 |
| cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| |
| config.h: stamp-h1 |
| @if test ! -f $@; then \ |
| rm -f stamp-h1; \ |
| $(MAKE) stamp-h1; \ |
| else :; fi |
| |
| stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status |
| @rm -f stamp-h1 |
| cd $(top_builddir) && $(SHELL) ./config.status config.h |
| |
| $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(top_srcdir)/configure.ac $(ACLOCAL_M4) $(top_srcdir)/acconfig.h |
| cd $(top_srcdir) && $(AUTOHEADER) |
| touch $(srcdir)/config.h.in |
| |
| distclean-hdr: |
| -rm -f config.h stamp-h1 |
| scripts/check_survey: $(top_builddir)/config.status $(top_srcdir)/scripts/check_survey.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| scripts/testsuite_flags: $(top_builddir)/config.status $(top_srcdir)/scripts/testsuite_flags.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| distclean-libtool: |
| -rm -f libtool |
| uninstall-info-am: |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run `make' without going through this Makefile. |
| # To change the values of `make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in `config.status', edit `config.status' |
| # (which will cause the Makefiles to be regenerated when you run `make'); |
| # (2) otherwise, pass the desired values on the `make' command line. |
| $(RECURSIVE_TARGETS): |
| @set fnord $$MAKEFLAGS; amf=$$2; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| mostlyclean-recursive clean-recursive distclean-recursive \ |
| maintainer-clean-recursive: |
| @set fnord $$MAKEFLAGS; amf=$$2; \ |
| dot_seen=no; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| rev=''; for subdir in $$list; do \ |
| if test "$$subdir" = "."; then :; else \ |
| rev="$$subdir $$rev"; \ |
| fi; \ |
| done; \ |
| rev="$$rev ."; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| for subdir in $$rev; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ |
| done && test -z "$$fail" |
| tags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| done |
| ctags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
| done |
| |
| ETAGS = etags |
| ETAGSFLAGS = |
| |
| CTAGS = ctags |
| CTAGSFLAGS = |
| |
| tags: TAGS |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| mkid -fID $$unique |
| |
| ctags: CTAGS |
| CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| test -z "$(CTAGS_ARGS)$$tags$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$tags $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && cd $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) $$here |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| |
| top_distdir = . |
| distdir = $(PACKAGE)-$(VERSION) |
| |
| am__remove_distdir = \ |
| { test ! -d $(distdir) \ |
| || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ |
| && rm -fr $(distdir); }; } |
| |
| GZIP_ENV = --best |
| distuninstallcheck_listfiles = find . -type f -print |
| distcleancheck_listfiles = find . -type f -print |
| |
| distdir: $(DISTFILES) |
| $(am__remove_distdir) |
| mkdir $(distdir) |
| $(mkinstalldirs) $(distdir)/.. $(distdir)/scripts |
| @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ |
| list='$(DISTFILES)'; for file in $$list; do \ |
| case $$file in \ |
| $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ |
| $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ |
| esac; \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
| dir="/$$dir"; \ |
| $(mkinstalldirs) "$(distdir)$$dir"; \ |
| else \ |
| dir=''; \ |
| fi; \ |
| if test -d $$d/$$file; then \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
| fi; \ |
| cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
| else \ |
| test -f $(distdir)/$$file \ |
| || cp -p $$d/$$file $(distdir)/$$file \ |
| || exit 1; \ |
| fi; \ |
| done |
| list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test -d $(distdir)/$$subdir \ |
| || mkdir $(distdir)/$$subdir \ |
| || exit 1; \ |
| (cd $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$(top_distdir)" \ |
| distdir=../$(distdir)/$$subdir \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ |
| ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ |
| || chmod -R a+r $(distdir) |
| dist-gzip: distdir |
| $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| $(am__remove_distdir) |
| |
| dist dist-all: distdir |
| $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| $(am__remove_distdir) |
| |
| # This target untars the dist file and tries a VPATH configuration. Then |
| # it guarantees that the distribution is self-contained by making another |
| # tarfile. |
| distcheck: dist |
| $(am__remove_distdir) |
| GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - |
| chmod -R a-w $(distdir); chmod a+w $(distdir) |
| mkdir $(distdir)/_build |
| mkdir $(distdir)/_inst |
| chmod a-w $(distdir) |
| dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ |
| && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ |
| && cd $(distdir)/_build \ |
| && ../configure --srcdir=.. --prefix="$$dc_install_base" \ |
| $(DISTCHECK_CONFIGURE_FLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
| && $(MAKE) $(AM_MAKEFLAGS) check \ |
| && $(MAKE) $(AM_MAKEFLAGS) install \ |
| && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| && $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ |
| distuninstallcheck \ |
| && chmod -R a-w "$$dc_install_base" \ |
| && ({ \ |
| (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ |
| distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ |
| } || { rm -rf "$$dc_destdir"; exit 1; }) \ |
| && rm -rf "$$dc_destdir" \ |
| && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \ |
| && rm -f $(distdir).tar.gz \ |
| && $(MAKE) $(AM_MAKEFLAGS) distcleancheck |
| $(am__remove_distdir) |
| @echo "$(distdir).tar.gz is ready for distribution" | \ |
| sed 'h;s/./=/g;p;x;p;x' |
| distuninstallcheck: |
| @cd $(distuninstallcheck_dir) \ |
| && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ |
| || { echo "ERROR: files left after uninstall:" ; \ |
| if test -n "$(DESTDIR)"; then \ |
| echo " (check DESTDIR support)"; \ |
| fi ; \ |
| $(distuninstallcheck_listfiles) ; \ |
| exit 1; } >&2 |
| distcleancheck: distclean |
| @if test '$(srcdir)' = . ; then \ |
| echo "ERROR: distcleancheck can only run from a VPATH build" ; \ |
| exit 1 ; \ |
| fi |
| @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left in build directory after distclean:" ; \ |
| $(distcleancheck_listfiles) ; \ |
| exit 1; } >&2 |
| check-am: all-am |
| check: check-recursive |
| all-am: Makefile all-multi config.h |
| installdirs: installdirs-recursive |
| installdirs-am: |
| |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -rm -f $(CONFIG_CLEAN_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-multi clean-recursive |
| |
| clean-am: clean-generic clean-libtool mostlyclean-am |
| |
| distclean: distclean-multi distclean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-hdr distclean-libtool \ |
| distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: |
| |
| install-exec-am: install-multi |
| |
| install-info: install-info-recursive |
| |
| install-man: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-multi maintainer-clean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(top_srcdir)/autom4te.cache |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-multi mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-recursive |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: uninstall-info-am |
| |
| uninstall-info: uninstall-info-recursive |
| |
| .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am all-multi check \ |
| check-am clean clean-generic clean-libtool clean-multi \ |
| clean-recursive ctags ctags-recursive dist dist-all dist-gzip \ |
| distcheck distclean distclean-generic distclean-hdr \ |
| distclean-libtool distclean-multi distclean-recursive \ |
| distclean-tags distcleancheck distdir distuninstallcheck dvi \ |
| dvi-am dvi-recursive info info-am info-recursive install \ |
| install-am install-data install-data-am install-data-recursive \ |
| install-exec install-exec-am install-exec-recursive \ |
| install-info install-info-am install-info-recursive install-man \ |
| install-multi install-recursive install-strip installcheck \ |
| installcheck-am installdirs installdirs-am \ |
| installdirs-recursive maintainer-clean maintainer-clean-generic \ |
| maintainer-clean-multi maintainer-clean-recursive mostlyclean \ |
| mostlyclean-generic mostlyclean-libtool mostlyclean-multi \ |
| mostlyclean-recursive pdf pdf-am pdf-recursive ps ps-am \ |
| ps-recursive tags tags-recursive uninstall uninstall-am \ |
| uninstall-info-am uninstall-info-recursive uninstall-recursive |
| |
| |
| @GLIBCXX_HOSTED_TRUE@ # Possibly libmath as well... |
| |
| # These rules are messy, but are hella worth it. |
| doxygen: |
| -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \ |
| builddir=`${PWD_COMMAND}`; \ |
| ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \ |
| --mode=user $${srcdir} $${builddir}) |
| |
| doxygen-maint: |
| -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \ |
| builddir=`${PWD_COMMAND}`; \ |
| ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \ |
| --mode=maint $${srcdir} $${builddir}) |
| |
| doxygen-man: |
| -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \ |
| builddir=`${PWD_COMMAND}`; \ |
| ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \ |
| --mode=man $${srcdir} $${builddir}) |
| |
| .PHONY: doxygen doxygen-maint doxygen-man |
| |
| # Handy forwarding targets. |
| check-%: |
| cd testsuite && $(MAKE) $@ |
| |
| # Multilib support. |
| .PHONY: all-multi mostlyclean-multi clean-multi distclean-multi \ |
| maintainer-clean-multi |
| |
| all-recursive: all-multi |
| install-recursive: install-multi |
| mostlyclean-recursive: mostlyclean-multi |
| clean-recursive: clean-multi |
| distclean-recursive: distclean-multi |
| maintainer-clean-recursive: maintainer-clean-multi |
| |
| all-multi: |
| : $(MAKE) ; exec $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do |
| install-multi: |
| $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do |
| mostlyclean-multi: |
| $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean |
| clean-multi: |
| $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean |
| distclean-multi: |
| $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean |
| maintainer-clean-multi: |
| $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean |
| |
| # All the machinations with string instantiations messes up the |
| # automake-generated TAGS rule. Make a simple one here. |
| TAGS: tags-recursive $(LISP) |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |