blob: 6553720acad21d4388bb22afbda9a8d488307e3d [file] [log] [blame]
2020-12-31 Richard Sandiford <richard.sandiford@arm.com>
PR tree-optimization/98302
* tree-vect-patterns.c (vect_determine_precisions_from_users): Make
sure that the precision remains greater than the shift count.
2020-12-31 Richard Sandiford <richard.sandiford@arm.com>
PR tree-optimization/94994
* tree-vect-data-refs.c (vect_vfa_align): Use dr_alignment.
2020-12-31 Richard Sandiford <richard.sandiford@arm.com>
PR rtl-optimization/98214
* genmodes.c (emit_insn_modes_h): Emit a definition of CONST_MODE_MASK.
(emit_mode_mask): Treat mode_mask_array as non-constant if adj_nunits.
(emit_mode_adjustments): Update GET_MODE_MASK when updating
GET_MODE_NUNITS.
* machmode.h (mode_mask_array): Use CONST_MODE_MASK.
2020-12-31 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/94802
* match.pd (clz(X) == 0 -> (int)X < 0): New simplification.
(clz(X) == (prec-1) -> X == 1): Likewise.
2020-12-31 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/94785
* match.pd ((-(X < 0) | 1) * X -> abs (X)): New simplification.
((-(X < 0) | 1U) * X -> absu (X)): Likewise.
2020-12-31 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/98474
* wide-int.cc (wi::to_mpz): If wide_int has MSB set, but type
is unsigned and excess negative, append set bits after len until
precision.
2020-12-31 Jakub Jelinek <jakub@redhat.com>
PR c++/98206
* fold-const.c: Include asan.h.
(fold_unary_loc): Don't optimize (ptr_type) (((ptr_type2) x) p+ y)
into ((ptr_type) x) p+ y if sanitizing alignment in GENERIC and
ptr_type points to type with higher alignment than ptr_type2.
2020-12-31 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/56719
* tree-ssa-reassoc.c (optimize_range_tests_cmp_bitwise): Also optimize
x < C && y < C && z < C when C is a power of two constant into
(x | y | z) < C.
2020-12-30 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386.md: Remove unnecessary clobbers
from combine splitters.
2020-12-30 Jakub Jelinek <jakub@redhat.com>
PR target/98461
* config/i386/sse.md (<sse2_avx2>_pmovmskb): Add splitters
for pmovmskb of NOT vector.
2020-12-29 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.md (maddsidi4_split): Skip macd gen, use mac insn
instead.
(macd): Update register letters.
(umaddsidi4_split): Skip macdu gen, use macu insn instead.
(macdu): Update register letters.
2020-12-29 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.c (arc_secondary_reload): Flip if-condition
predicates.
2020-12-29 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.h (REGNO_OK_FOR_BASE_P): Check if defined
reg_renumber.
2020-12-29 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.c (prepare_move_operands): Use a temporary
registers when we have cached mem-to-uncached mem moves.
2020-12-29 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.md (movdi_insn): Update pattern, no predicated
vadd2 usage.
(movdf_insn): Likewise.
* config/arc/simdext.md (movVEC_insn): Likewise.
2020-12-29 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386-expand.c (ix86_gen_TWO52): Use REAL_MODE_FORMAT
to determine number of mantissa bits. Use real_2expN instead
of real_ldexp.
(ix86_expand_rint): Use copy_to_reg.
(ix86_expand_floorceildf_32): Ditto.
(ix86_expand_truncdf_32): Ditto.
(ix86_expand_rounddf_32): Ditto.
(ix86_expand_floorceil): Use copy_to_reg and int_mode_for_mode.
(ix86_expand_trunc): Ditto.
(ix86_expand_round): Ditto.
2020-12-28 Gerald Pfeifer <gerald@pfeifer.com>
* doc/standards.texi (HSAIL): Remove section.
2020-12-28 Uroš Bizjak <ubizjak@gmail.com>
PR target/96793
* config/i386/i386-expand.c (ix86_expand_rint):
Remove the sign of the intermediate value for flag_rounding_math.
2020-12-28 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386-expand.c (ix86_expand_trunc): Use
existing temporary register to avoid a call to force_reg.
2020-12-28 Hongyu Wang <hongyu.wang@intel.com>
* config/i386/i386.md (optab): New code attr.
* config/i386/sse.md (<code>v32qiv32hi2): Rename to ...
(<optab>v32qiv32hi2) ... this.
(<code>v16qiv16hi2): Likewise.
(<code>v8qiv8hi2): Likewise.
(<code>v16qiv16si2): Likewise.
(<code>v8qiv8si2): Likewise.
(<code>v4qiv4si2): Likewise.
(<code>v16hiv16si2): Likewise.
(<code>v8hiv8si2): Likewise.
(<code>v4hiv4si2): Likewise.
(<code>v8qiv8di2): Likewise.
(<code>v4qiv4di2): Likewise.
(<code>v2qiv2di2): Likewise.
(<code>v8hiv8di2): Likewise.
(<code>v4hiv4di2): Likewise.
(<code>v2hiv2di2): Likewise.
(<code>v8siv8di2): Likewise.
(<code>v4siv4di2): Likewise.
(<code>v2siv2di2): Likewise.
2020-12-27 Gerald Pfeifer <gerald@pfeifer.com>
* doc/analyzer.texi (Analyzer Internals): Find a new source for
the "A Memory Model for Static Analysis of C Programs" paper.
2020-12-25 Gerald Pfeifer <gerald@pfeifer.com>
* doc/invoke.texi (C++ Module Mapper): Fix reference to libcody.
2020-12-24 Iain Sandoe <iain@sandoe.co.uk>
* configure.ac: Add gxx-libcxx-include-dir handled
in the same way as the regular cxx header directory.
* Makefile.in: Regenerated.
* config.in: Likewise.
* configure: Likewise.
* cppdefault.c: Pick up libc++ headers if the option
is enabled.
* cppdefault.h (struct default_include): Amend comments
to reflect the extended use of the cplusplus field.
* incpath.c (add_standard_paths): Allow for multiple
c++ header include path variants.
* doc/invoke.texi: Document the -stdlib= option.
2020-12-24 Kito Cheng <kito.cheng@sifive.com>
* config/riscv/multilib-generator (arch_canonicalize): Call
decode for the subprocess return value.
2020-12-23 Martin Sebor <msebor@redhat.com>
PR middle-end/98160
* builtins.c (warn_dealloc_offset): Avoid assuming calls are made
through declared functions and not pointers.
2020-12-23 Martin Sebor <msebor@redhat.com>
PR c++/98413
* builtins.c (get_offset_range): Avoid non-integers/-pointers.
2020-12-23 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin-driver.c (validate_macosx_version_min): Allow
MACOSX_DEPLOYMENT_TARGET=11.
(darwin_default_min_version): Adjust warning spelling to avoid
an apostrophe.
2020-12-23 Uroš Bizjak <ubizjak@gmail.com>
PR target/96793
* config/i386/i386-expand.c (ix86_expand_truncdf_32):
Remove the sign of the intermediate value for flag_rounding_math.
2020-12-22 Qian Jianhua <qianjh@cn.fujitsu.com>
* config/arm/types.md (define_attr "autodetect_type"): New.
(define_attr "type"): Subdivide alu_shift_imm.
* config/arm/common.md: New file.
* config/aarch64/predicates.md:Include common.md.
* config/arm/predicates.md:Include common.md.
* config/aarch64/aarch64.md (*add_<shift>_<mode>): Set autodetect_type.
(*add_<shift>_si_uxtw): Likewise.
(*sub_<shift>_<mode>): Likewise.
(*sub_<shift>_si_uxtw): Likewise.
(*neg_<shift>_<mode>2): Likewise.
(*neg_<shift>_si2_uxtw): Likewise.
* config/arm/arm.md (*addsi3_carryin_shift): Likewise.
(add_not_shift_cin): Likewise.
(*subsi3_carryin_shift): Likewise.
(*subsi3_carryin_shift_alt): Likewise.
(*rsbsi3_carryin_shift): Likewise.
(*rsbsi3_carryin_shift_alt): Likewise.
(*arm_shiftsi3): Likewise.
(*<arith_shift_insn>_multsi): Likewise.
(*<arith_shift_insn>_shiftsi): Likewise.
(subsi3_carryin): Set new type.
(*if_arith_move): Set new type.
(*if_move_arith): Set new type.
(define_attr "core_cycles"): Use new type.
* config/arm/arm-fixed.md (arm_ssatsihi_shift): Set autodetect_type.
* config/arm/thumb2.md (*orsi_not_shiftsi_si): Likewise.
(*thumb2_shiftsi3_short): Set new type.
* config/aarch64/falkor.md (falkor_alu_1_xyz): Use new type.
* config/aarch64/saphira.md (saphira_alu_1_xyz): Likewise.
* config/aarch64/thunderx.md (thunderx_arith_shift): Likewise.
* config/aarch64/thunderx2t99.md (thunderx2t99_alu_shift): Likewise.
* config/aarch64/thunderx3t110.md (thunderx3t110_alu_shift): Likewise.
(thunderx3t110_alu_shift1): Likewise.
* config/aarch64/tsv110.md (tsv110_alu_shift): Likewise.
* config/arm/arm1020e.md (1020alu_shift_op): Likewise.
* config/arm/arm1026ejs.md (alu_shift_op): Likewise.
* config/arm/arm1136jfs.md (11_alu_shift_op): Likewise.
* config/arm/arm926ejs.md (9_alu_op): Likewise.
* config/arm/cortex-a15.md (cortex_a15_alu_shift): Likewise.
* config/arm/cortex-a17.md (cortex_a17_alu_shiftimm): Likewise.
* config/arm/cortex-a5.md (cortex_a5_alu_shift): Likewise.
* config/arm/cortex-a53.md (cortex_a53_alu_shift): Likewise.
* config/arm/cortex-a57.md (cortex_a57_alu_shift): Likewise.
* config/arm/cortex-a7.md (cortex_a7_alu_shift): Likewise.
* config/arm/cortex-a8.md (cortex_a8_alu_shift): Likewise.
* config/arm/cortex-a9.md (cortex_a9_dp_shift): Likewise.
* config/arm/cortex-m4.md (cortex_m4_alu): Likewise.
* config/arm/cortex-m7.md (cortex_m7_alu_shift): Likewise.
* config/arm/cortex-r4.md (cortex_r4_alu_shift): Likewise.
* config/arm/exynos-m1.md (exynos_m1_alu_shift): Likewise.
* config/arm/fa526.md (526_alu_shift_op): Likewise.
* config/arm/fa606te.md (606te_alu_op): Likewise.
* config/arm/fa626te.md (626te_alu_shift_op): Likewise.
* config/arm/fa726te.md (726te_alu_shift_op): Likewise.
* config/arm/fmp626.md (mp626_alu_shift_op): Likewise.
* config/arm/marvell-pj4.md (pj4_shift): Likewise.
(pj4_shift_conds): Likewise.
(pj4_alu_shift): Likewise.
(pj4_alu_shift_conds): Likewise.
* config/arm/xgene1.md (xgene1_alu): Likewise.
* config/arm/arm.c (xscale_sched_adjust_cost): Likewise.
2020-12-22 Uroš Bizjak <ubizjak@gmail.com>
PR target/96793
* config/i386/i386-expand.c (ix86_expand_floorceil):
Remove the sign of the intermediate value for flag_rounding_math.
(ix86_expand_floorceildf_32): Ditto.
2020-12-22 liuhongt <hongtao.liu@intel.com>
* config/i386/i386.md (*one_cmpl<mode>2_1): Fix typo, change
alternative from 2 to 1 in attr isa.
2020-12-22 Ian Lance Taylor <iant@golang.org>
* godump.c (go_output_typedef): If DECL_ORIGINAL_TYPE is NULL, use
TREE_TYPE.
2020-12-21 Jakub Jelinek <jakub@redhat.com>
PR c++/98353
* gimplify.c (gimplify_init_ctor_eval_range): Gimplify value before
storing it into cref.
2020-12-21 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin-driver.c (darwin_find_version_from_kernel):
Compute the minor OS version from the minor kernel version.
2020-12-21 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/98407
* fold-const.c (native_encode_initializer): When handling flexible
array members, fix up computation of length for memset. Also remove
" - o" as o is always guaranteed to be 0 in this code path.
2020-12-21 Jakub Jelinek <jakub@redhat.com>
PR c++/98383
* gimplify.c (struct gimplify_omp_ctx): Add in_for_exprs flag.
(gimple_add_tmp_var): For addressable temporaries appearing in
simd lb, b or incr expressions, don't add a private clause unless
it is seen also outside of those expressions in the simd body.
(omp_notice_variable): Likewise.
(gimplify_omp_for): Set and reset in_for_exprs around gimplification
of lb, b or incr expressions.
2020-12-20 Max Filippov <jcmvbkbc@gmail.com>
* config/xtensa/xtensa.md (bswapsi2, bswapdi2): New patterns.
2020-12-20 Jakub Jelinek <jakub@redhat.com>
PR other/98400
* doc/invoke.texi (-mbackchain): Fix a typo - -mmo-backchain ->
-mno-backchain.
2020-12-19 Jakub Jelinek <jakub@redhat.com>
PR middle-end/98366
* fold-const.c (native_encode_initializer): Don't try to
memset more than total_bytes with off == -1 even if len is large.
Handle flexible array member initializers if off == -1 and mask is
NULL.
* expr.c (convert_to_bytes): Remove.
(constant_byte_string): Use native_encode_initializer instead of
convert_to_bytes. Remove extraneous semicolon. Punt on various
corner-cases the APIs don't handle, like sizes > INT_MAX,
BITS_PER_UNIT != 8, CHAR_BIT != 8.
2020-12-19 Iain Buclaw <ibuclaw@gdcproject.org>
PR d/98067
* dwarf2out.c (dwarf2out_imported_module_or_decl_1): Handle
CONST_DECL only if is_fortran, is_ada, or is_dlang.
2020-12-19 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/98378
* gimple-ssa-store-merging.c (find_bswap_or_nop): Punt if CONSTRUCTOR
has no elements.
2020-12-18 Jakub Jelinek <jakub@redhat.com>
* gimplify.c (struct gimplify_omp_ctx): Add has_depend member.
(gimplify_scan_omp_clauses): Set it to true if OMP_CLAUSE_DEPEND
appears on OMP_TASK.
(gimplify_adjust_omp_clauses_1, gimplify_adjust_omp_clauses): Force
GOVD_WRITTEN on shared variables if task construct has depend clause.
2020-12-18 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
PR target/98177
* tree-vect-loop.c (vect_create_epilog_for_reduction): Use
get_same_sized_vectype to obtain index type.
(vectorizable_reduction): Likewise.
2020-12-18 Kwok Cheung Yeung <kcy@codesourcery.com>
* langhooks-def.h (lhd_get_decl_init): New.
(lhd_finish_decl_inits): New.
(LANG_HOOKS_GET_DECL_INIT): New.
(LANG_HOOKS_OMP_FINISH_DECL_INITS): New.
(LANG_HOOKS_DECLS): Add LANG_HOOKS_GET_DECL_INIT and
LANG_HOOKS_OMP_FINISH_DECL_INITS.
* langhooks.c (lhd_omp_get_decl_init): New.
(lhd_omp_finish_decl_inits): New.
* langhooks.h (struct lang_hooks_for_decls): Add omp_get_decl_init
and omp_finish_decl_inits.
* omp-offload.c (omp_discover_declare_target_var_r): Use
get_decl_init langhook in place of DECL_INITIAL. Call
omp_finish_decl_inits langhook at end of function.
2020-12-18 Richard Sandiford <richard.sandiford@arm.com>
* config/aarch64/aarch64.c (aarch64_preferred_simd_mode): Use
aarch64_full_sve_mode and aarch64_vq_mode directly, instead of
going via aarch64_simd_container_mode.
2020-12-18 Tamar Christina <tamar.christina@arm.com>
* config/arm/iterators.md (rot): Add UNSPEC_VCMUL, UNSPEC_VCMUL90,
UNSPEC_VCMUL180, UNSPEC_VCMUL270.
2020-12-17 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/arm/arm-cpus.in: Add Cortex-A78C core.
* config/arm/arm-tables.opt: Regenerate.
* config/arm/arm-tune.md: Regenerate.
* doc/invoke.texi: Update docs.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
PR rtl-optimization/98347
* rtl-ssa/access-utils.h (full_register): Use regno_reg_rtx
instead of reg_raw_mode.
2020-12-17 H.J. Lu <hjl.tools@gmail.com>
* targhooks.h (default_estimated_poly_value): Updated.
2020-12-17 Nathan Sidwell <nathan@acm.org>
* doc/invoke.texi (C++ Modules): Document lack of std
library header units.
2020-12-17 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* target.h (enum poly_value_estimate_kind): Define.
(estimated_poly_value): Take an estimate kind argument.
* target.def (estimated_poly_value): Update definition for the
above.
* doc/tm.texi: Regenerate.
* targhooks.c (estimated_poly_value): Update prototype.
* tree-vect-loop.c (vect_better_loop_vinfo_p): Use min, max and
likely estimates of VF to pick between vinfos.
* config/aarch64/aarch64.c (aarch64_cmp_autovec_modes): Use
estimated_poly_value instead of aarch64_estimated_poly_value.
(aarch64_estimated_poly_value): Take a kind argument and handle
it.
2020-12-17 Andrea Corallo <andrea.corallo@arm.com>
* config/arm/arm_neon.h (vcreate_p64): Remove call to
'__builtin_neon_vcreatedi'.
2020-12-17 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/97750
* range-op.cc (operator_cast::op1_range): Handle pointers better.
2020-12-17 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* rtl-ssa.h: Include memmodel.h before tm_p.h.
2020-12-17 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/98289
* shrink-wrap.c (can_get_prologue): Don't punt on EDGE_CROSSING
incoming edges.
2020-12-17 Marius Hillenbrand <mhillen@linux.ibm.com>
* configure.ac: Change --enable-s390-excess-float-precision
default behavior for cross compiles with target headers.
* configure: Regenerate.
* doc/install.texi: Adjust documentation.
2020-12-17 Takayuki 'January June' Suwa <jjsuwa_sys3175@yahoo.co.jp>
* config/xtensa/xtensa.md (*ashlsi3_1, *ashlsi3_3x, *ashrsi3_3x)
(*lshrsi3_3x): New patterns.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* fwprop.c: Rewrite to use the RTL SSA framework.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* configure.ac: Add rtl-ssa to the list of dependence directories.
* configure: Regenerate.
* Makefile.in (rtl-ssa-warn): New variable.
(OBJS): Add the rtl-ssa object files.
* emit-rtl.h (rtl_data::ssa): New field.
* rtl-ssa.h: New file.
* system.h: Include <functional> when INCLUDE_FUNCTIONAL is defined.
* rtl-ssa/access-utils.h: Likewise.
* rtl-ssa/accesses.h: New file.
* rtl-ssa/accesses.cc: Likewise.
* rtl-ssa/blocks.h: New file.
* rtl-ssa/blocks.cc: Likewise.
* rtl-ssa/change-utils.h: Likewise.
* rtl-ssa/changes.h: New file.
* rtl-ssa/changes.cc: Likewise.
* rtl-ssa/functions.h: New file.
* rtl-ssa/functions.cc: Likewise.
* rtl-ssa/insn-utils.h: Likewise.
* rtl-ssa/insns.h: New file.
* rtl-ssa/insns.cc: Likewise.
* rtl-ssa/internals.inl: Likewise.
* rtl-ssa/is-a.inl: Likewise.
* rtl-ssa/member-fns.inl: Likewise.
* rtl-ssa/movement.h: Likewise.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* doc/rtl.texi (RTL SSA): New node.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* rtl.h (simple_regno_set): Declare.
* rtlanal.c (simple_regno_set): New function.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* rtlanal.h: New file.
(MEM_REGNO): New constant.
(rtx_obj_flags): New namespace.
(rtx_obj_reference, rtx_properties): New classes.
(growing_rtx_properties, vec_rtx_properties_base): Likewise.
(vec_rtx_properties): New alias.
* rtlanal.c: Include it.
(rtx_properties::try_to_add_reg): New function.
(rtx_properties::try_to_add_dest): Likewise.
(rtx_properties::try_to_add_src): Likewise.
(rtx_properties::try_to_add_pattern): Likewise.
(rtx_properties::try_to_add_insn): Likewise.
(vec_rtx_properties_base::grow): Likewise.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* recog.h (insn_change_watermark): New class.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* recog.h (insn_propagation): New class.
* recog.c (insn_propagation::apply_to_mem_1): New function.
(insn_propagation::apply_to_rvalue_1): Likewise.
(insn_propagation::apply_to_lvalue_1): Likewise.
(insn_propagation::apply_to_pattern_1): Likewise.
(insn_propagation::apply_to_pattern): Likewise.
(insn_propagation::apply_to_rvalue): Likewise.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* recog.h (temporarily_undo_changes, redo_changes): Declare.
* recog.c (temporarily_undone_changes): New variable.
(validate_change_1, confirm_change_group): Check that it's zero.
(cancel_changes): Likewise.
(swap_change, temporarily_undo_changes): New functions.
(redo_changes): Likewise.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* recog.h (validate_change_xveclen): Declare.
* recog.c (change_t::old_len): New field.
(validate_change_1): Add a new_len parameter. Conditionally
replace the XVECLEN of an rtx, avoiding single-element PARALLELs.
(validate_change_xveclen): New function.
(cancel_changes): Undo changes made by validate_change_xveclen.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* rtl.h (simplify_context): New class.
(simplify_unary_operation, simplify_binary_operation): Use it.
(simplify_ternary_operation, simplify_relational_operation): Likewise.
(simplify_subreg, simplify_gen_unary, simplify_gen_binary): Likewise.
(simplify_gen_ternary, simplify_gen_relational): Likewise.
(simplify_gen_subreg, lowpart_subreg): Likewise.
* simplify-rtx.c (simplify_gen_binary): Turn into a member function
of simplify_context.
(simplify_gen_unary, simplify_gen_ternary, simplify_gen_relational)
(simplify_truncation, simplify_unary_operation): Likewise.
(simplify_unary_operation_1, simplify_byte_swapping_operation)
(simplify_associative_operation, simplify_logical_relational_operation)
(simplify_binary_operation, simplify_binary_operation_series)
(simplify_distributive_operation, simplify_plus_minus): Likewise.
(simplify_relational_operation, simplify_relational_operation_1)
(simplify_cond_clz_ctz, simplify_merge_mask): Likewise.
(simplify_ternary_operation, simplify_subreg, simplify_gen_subreg)
(lowpart_subreg): Likewise.
(simplify_binary_operation_1): Likewise. Test mem_depth when
deciding whether the ASHIFT or MULT form is canonical.
(simplify_merge_mask): Use simplify_context.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* rtl.h (register_asm_p): Declare.
* recog.c (verify_changes): Split out the test for whether
a hard register is a register asm to...
* rtlanal.c (register_asm_p): ...this new function.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* print-rtl.h (print_insn_with_notes): Declare.
* print-rtl.c (print_insn_with_notes): Make non-static
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* cfgrtl.h (update_cfg_for_uncondjump): Declare.
* combine.c (update_cfg_for_uncondjump): Move to...
* cfgrtl.c: ...here.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* vec.h (array_slice): New class.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* Makefile.in (OBJS): Add splay-tree-utils.o.
* system.h: Include <array> when INCLUDE_ARRAY is defined.
* selftest.h (splay_tree_cc_tests): Declare.
* selftest-run-tests.c (selftest::run_tests): Run splay_tree_cc_tests.
* splay-tree-utils.h: New file.
* splay-tree-utils.tcc: Likewise.
* splay-tree-utils.cc: Likewise.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* mux-utils.h: New file.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* obstack-utils.h: New file.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* iterator-utils.h (derived_iterator): New class.
(const_derived_container, wrapper_iterator): Likewise.
(list_iterator): Likewise.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* hard-reg-set.h (global_reg_set): Declare.
* reginfo.c (global_reg_set): New variable.
(init_reg_sets_1, globalize_reg): Update it when globalizing
registers.
2020-12-16 Piotr Kubaj <pkubaj@FreeBSD.org>
* config.gcc (powerpc*le-*-freebsd*): Add.
* configure.ac (powerpc*le-*-freebsd*): Ditto.
* configure: Regenerate.
* config/rs6000/freebsd64.h (ASM_SPEC_COMMON): Use ENDIAN_SELECT.
(DEFAULT_ASM_ENDIAN): Add little endian support.
(LINK_OS_FREEBSD_SPEC64): Ditto.
2020-12-16 Takayuki 'January June' Suwa <jjsuwa_sys3175@yahoo.co.jp>
* config/xtensa/xtensa.c (xtensa_emit_move_sequence): Try to
replace 'l32r' with 'movi' + 'slli' when optimizing for size.
* config/xtensa/xtensa.md (movdi): Split loading DI mode constant
into register pair into two loads of SI mode constants.
2020-12-16 Tamar Christina <tamar.christina@arm.com>
* config/arm/arm_mve.h (__arm_vcmulq_rot90_f16):
(__arm_vcmulq_rot270_f16, _arm_vcmulq_rot180_f16, __arm_vcmulq_f16,
__arm_vcmulq_rot90_f32, __arm_vcmulq_rot270_f32,
__arm_vcmulq_rot180_f32, __arm_vcmulq_f32, __arm_vcmlaq_f16,
__arm_vcmlaq_rot180_f16, __arm_vcmlaq_rot270_f16,
__arm_vcmlaq_rot90_f16, __arm_vcmlaq_f32, __arm_vcmlaq_rot180_f32,
__arm_vcmlaq_rot270_f32, __arm_vcmlaq_rot90_f32): Update builtin calls.
* config/arm/arm_mve_builtins.def (vcmulq_f, vcmulq_rot90_f,
vcmulq_rot180_f, vcmulq_rot270_f, vcmlaq_f, vcmlaq_rot90_f,
vcmlaq_rot180_f, vcmlaq_rot270_f): Removed.
(vcmulq, vcmulq_rot90, vcmulq_rot180, vcmulq_rot270, vcmlaq,
vcmlaq_rot90, vcmlaq_rot180, vcmlaq_rot270): New.
* config/arm/iterators.md (mve_rot): Add UNSPEC_VCMLA, UNSPEC_VCMLA90,
UNSPEC_VCMLA180, UNSPEC_VCMLA270, UNSPEC_VCMUL, UNSPEC_VCMUL90,
UNSPEC_VCMUL180, UNSPEC_VCMUL270.
(VCMUL): New.
* config/arm/mve.md (mve_vcmulq_f<mode, mve_vcmulq_rot180_f<mode>,
mve_vcmulq_rot270_f<mode>, mve_vcmulq_rot90_f<mode>, mve_vcmlaq_f<mode>,
mve_vcmlaq_rot180_f<mode>, mve_vcmlaq_rot270_f<mode>,
mve_vcmlaq_rot90_f<mode>): Removed.
(mve_vcmlaq<mve_rot><mode>, mve_vcmulq<mve_rot><mode>,
mve_vcaddq<mve_rot><mode>, cadd<rot><mode>3, mve_vcaddq<mve_rot><mode>):
New.
* config/arm/unspecs.md (UNSPEC_VCMUL90, UNSPEC_VCMUL270, UNSPEC_VCMUL,
UNSPEC_VCMUL180): New.
(VCMULQ_F, VCMULQ_ROT180_F, VCMULQ_ROT270_F, VCMULQ_ROT90_F,
VCMLAQ_F, VCMLAQ_ROT180_F, VCMLAQ_ROT90_F, VCMLAQ_ROT270_F): Removed.
2020-12-16 Tamar Christina <tamar.christina@arm.com>
* config/arm/arm_mve.h (__arm_vcaddq_rot90_u8, __arm_vcaddq_rot270_u8,
__arm_vcaddq_rot90_s8, __arm_vcaddq_rot270_s8,
__arm_vcaddq_rot90_u16, __arm_vcaddq_rot270_u16,
__arm_vcaddq_rot90_s16, __arm_vcaddq_rot270_s16,
__arm_vcaddq_rot90_u32, __arm_vcaddq_rot270_u32,
__arm_vcaddq_rot90_s32, __arm_vcaddq_rot270_s32,
__arm_vcaddq_rot90_f16, __arm_vcaddq_rot270_f16,
__arm_vcaddq_rot90_f32, __arm_vcaddq_rot270_f32): Update builtin calls.
* config/arm/arm_mve_builtins.def (vcaddq_rot90_u, vcaddq_rot270_u,
vcaddq_rot90_s, vcaddq_rot270_s, vcaddq_rot90_f, vcaddq_rot270_f):
Removed.
(vcaddq_rot90, vcaddq_rot270): New.
* config/arm/constraints.md (Dz): Include MVE.
* config/arm/iterators.md (mve_rot): New.
(supf): Remove VCADDQ_ROT270_S, VCADDQ_ROT270_U, VCADDQ_ROT90_S,
VCADDQ_ROT90_U.
(VCADDQ_ROT270, VCADDQ_ROT90): Removed.
* config/arm/mve.md (mve_vcaddq_rot270_<supf><mode,
mve_vcaddq_rot90_<supf><mode>, mve_vcaddq_rot270_f<mode>,
mve_vcaddq_rot90_f<mode>): Removed.
(mve_vcaddq<mve_rot><mode>, mve_vcaddq<mve_rot><mode>): New.
* config/arm/unspecs.md (VCADDQ_ROT270_S, VCADDQ_ROT90_S,
VCADDQ_ROT270_U, VCADDQ_ROT90_U, VCADDQ_ROT270_F,
VCADDQ_ROT90_F): Removed.
* config/arm/vec-common.md (cadd<rot><mode>3): New.
2020-12-16 Tamar Christina <tamar.christina@arm.com>
* config/aarch64/aarch64-simd.md (cadd<rot><mode>3): New.
* config/aarch64/iterators.md (SVE2_INT_CADD_OP): New.
* config/aarch64/aarch64-sve.md (cadd<rot><mode>3): New.
* config/aarch64/aarch64-sve2.md (cadd<rot><mode>3): New.
2020-12-16 Pat Haugen <pthaugen@linux.ibm.com>
* config/rs6000/mma.md (*movxo, mma_<vvi4i4i8>, mma_<avvi4i4i8>,
mma_<vvi4i4i2>, mma_<avvi4i4i2>, mma_<vvi4i4>, mma_<avvi4i4>,
mma_<pvi4i2>, mma_<apvi4i2>, mma_<vvi4i4i4>, mma_<avvi4i4i4>):
Remove explicit setting of length attribute.
2020-12-16 Jakub Jelinek <jakub@redhat.com>
* varasm.c (default_elf_asm_named_section): Always force
section flags even for sections with SECTION_LINK_ORDER flag.
2020-12-16 H.J. Lu <hjl.tools@gmail.com>
PR target/98146
* defaults.h (SUPPORTS_SHF_GNU_RETAIN): New.
* varasm.c (get_section): Replace HAVE_GAS_SHF_GNU_RETAIN with
SUPPORTS_SHF_GNU_RETAIN.
(resolve_unique_section): Likewise.
(get_variable_section): Likewise.
(switch_to_section): Likewise.
2020-12-16 H.J. Lu <hjl.tools@gmail.com>
PR target/98146
* varasm.c (switch_to_section): Warn when a symbol without used
attribute and a symbol with used attribute are placed in the
section with the same name.
2020-12-16 H.J. Lu <hjl.tools@gmail.com>
PR target/98146
* output.h (switch_to_section): Add a tree argument, default to
nullptr.
* varasm.c (get_section): If the SECTION_RETAIN bit doesn't match,
return and switch to a new section later.
(assemble_start_function): Pass decl to switch_to_section.
(assemble_variable): Likewise.
(switch_to_section): If the SECTION_RETAIN bit doesn't match,
switch to a new section.
2020-12-16 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96239
* gimple-ssa-store-merging.c (find_bswap_or_nop): Handle a vector
CONSTRUCTOR.
(bswap_replace): Likewise.
2020-12-16 Martin Liska <mliska@suse.cz>
* common.opt: Remove usage of Report.
* config/aarch64/aarch64.opt: Ditto.
* config/alpha/alpha.opt: Ditto.
* config/arc/arc.opt: Ditto.
* config/arm/arm.opt: Ditto.
* config/avr/avr.opt: Ditto.
* config/bfin/bfin.opt: Ditto.
* config/bpf/bpf.opt: Ditto.
* config/c6x/c6x.opt: Ditto.
* config/cr16/cr16.opt: Ditto.
* config/cris/cris.opt: Ditto.
* config/cris/elf.opt: Ditto.
* config/csky/csky.opt: Ditto.
* config/darwin.opt: Ditto.
* config/fr30/fr30.opt: Ditto.
* config/frv/frv.opt: Ditto.
* config/ft32/ft32.opt: Ditto.
* config/gcn/gcn.opt: Ditto.
* config/i386/cygming.opt: Ditto.
* config/i386/i386.opt: Ditto.
* config/ia64/ia64.opt: Ditto.
* config/ia64/ilp32.opt: Ditto.
* config/linux-android.opt: Ditto.
* config/linux.opt: Ditto.
* config/lm32/lm32.opt: Ditto.
* config/m32r/m32r.opt: Ditto.
* config/m68k/m68k.opt: Ditto.
* config/mcore/mcore.opt: Ditto.
* config/microblaze/microblaze.opt: Ditto.
* config/mips/mips.opt: Ditto.
* config/mmix/mmix.opt: Ditto.
* config/mn10300/mn10300.opt: Ditto.
* config/moxie/moxie.opt: Ditto.
* config/msp430/msp430.opt: Ditto.
* config/nds32/nds32.opt: Ditto.
* config/nios2/elf.opt: Ditto.
* config/nios2/nios2.opt: Ditto.
* config/nvptx/nvptx.opt: Ditto.
* config/pa/pa.opt: Ditto.
* config/pdp11/pdp11.opt: Ditto.
* config/pru/pru.opt: Ditto.
* config/riscv/riscv.opt: Ditto.
* config/rl78/rl78.opt: Ditto.
* config/rs6000/aix64.opt: Ditto.
* config/rs6000/linux64.opt: Ditto.
* config/rs6000/rs6000.opt: Ditto.
* config/rs6000/sysv4.opt: Ditto.
* config/rx/elf.opt: Ditto.
* config/rx/rx.opt: Ditto.
* config/s390/s390.opt: Ditto.
* config/s390/tpf.opt: Ditto.
* config/sh/sh.opt: Ditto.
* config/sol2.opt: Ditto.
* config/sparc/long-double-switch.opt: Ditto.
* config/sparc/sparc.opt: Ditto.
* config/tilegx/tilegx.opt: Ditto.
* config/tilepro/tilepro.opt: Ditto.
* config/v850/v850.opt: Ditto.
* config/visium/visium.opt: Ditto.
* config/vms/vms.opt: Ditto.
* config/vxworks.opt: Ditto.
* config/xtensa/xtensa.opt: Ditto.
2020-12-16 Martin Liska <mliska@suse.cz>
* doc/options.texi: Remove Report keyword.
* opt-functions.awk: Print error when Report keyword
is used.
* optc-gen.awk: Do not handle Report keyword.
* opts.h (struct cl_option): Remove cl_report bitfield flag.
2020-12-16 Martin Liska <mliska@suse.cz>
PR sanitizer/97868
* common.opt: Add new warning -Wtsan.
* doc/invoke.texi: Likewise.
* tsan.c (instrument_builtin_call): Warn users about unsupported
std::atomic_thread_fence.
2020-12-16 Martin Liska <mliska@suse.cz>
PR rtl-optimization/98271
PR rtl-optimization/98276
PR tree-optimization/98279
* opts-common.c (set_option): Do not allow overflow for integer
arguments.
2020-12-16 Eric Botcazou <ebotcazou@adacore.com>
PR tree-optimization/98272
* tree-switch-conversion.c (bit_test_cluster::emit): When finding
out whether the entry test can be merged in the bit test, do the
computation using the type of the index expression.
2020-12-16 Kewen Lin <linkw@linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_expand_vector_init): Use
paradoxical subreg instead of zero_extend for QI/HI promotion.
2020-12-16 Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>
PR target/66791
* config/arm/arm_neon.h: Replace calls to __builtin_vcgt* by
<, > operators in vclt and vcgt intrinsics respectively.
* config/arm/arm_neon_builtins.def: Remove entry for
vcgt and vcgtu.
2020-12-16 Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>
PR target/66791
* config/arm/arm_neon.h: Replace calls to __builtin_vneg* by - operator
in vneg intrinsics.
* config/arm/arm_neon_builtins.def: Remove entry for vneg.
2020-12-16 Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>
PR target/66791
* config/arm/arm_neon.h: Replace calls to __builtin_vcreate*
in vcreate intrinsics.
* config/arm/arm_neon_builtins.def: Remove entry for vcreate.
2020-12-15 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96094
* match.pd (X / bool_range_Y -> X): New simplification.
2020-12-15 Nathan Sidwell <nathan@acm.org>
* doc/cppopts.texi: Document new cpp opt.
* doc/invoke.texi: Add C++20 module option & documentation.
2020-12-15 Nathan Sidwell <nathan@acm.org>
* Makefile.in (CODYINC, CODYLIB, CODYLIB_H): New. Use them.
2020-12-15 Jakub Jelinek <jakub@redhat.com>
PR target/98274
* config/i386/i386-options.c (ix86_option_override_internal): Set
ix86_tune_string to "generic" even when it wasn't specified and
ix86_arch_string is "x86-64-v2", "x86-64-v3" or "x86-64-v4".
Remove useless {}s around a single statement.
2020-12-15 Martin Liska <mliska@suse.cz>
PR lto/98275
* lto-wrapper.c: Do not use -j0 when we are unable to detect
number of cores.
2020-12-15 Jakub Jelinek <jakub@redhat.com>
* config/i386/i386-options.c (ix86_option_override_internal): Don't
error on -march=x86-64-v[234] with -m32 or -mabi=ms.
* config.gcc: Don't reject --with-arch=x86-64-v[234] or
--with-arch_32=x86-64-v[234].
* doc/invoke.texi (-march=x86-64-v[234]): Document what the option
does for other ABIs.
2020-12-15 Martin Liska <mliska@suse.cz>
PR gcov-profile/98273
* gcov.c (output_json_intermediate_file): Use stack of nested
functions for lines in a source file. Pop when a function ends.
2020-12-15 Gerald Pfeifer <gerald@pfeifer.com>
* doc/invoke.texi (Instrumentation Options): Update link to
KernelAddressSanitizer.
2020-12-15 Max Filippov <jcmvbkbc@gmail.com>
* config/xtensa/predicates.md (addsubx_operand): Change accepted
values from 2/4/8 to 1..3.
* config/xtensa/xtensa.md (*addx, *subx): Change RTL pattern
to use 'ashift' instead of 'mult'. Update operands[3] value.
2020-12-14 Piotr Kubaj <pkubaj@FreeBSD.org>
Gerald Pfeifer <gerald@pfeifer.com>
* config/rs6000/freebsd64.h (PROCESSOR_DEFAULT): Update
to PROCESSOR_PPC7450.
(PROCESSOR_DEFAULT64): Update to PROCESSOR_POWER8.
2020-12-14 Martin Sebor <msebor@redhat.com>
PR middle-end/98166
PR c++/57111
PR middle-end/98160
* builtins.c (check_access): Call tree_inlined_location
fndecl_alloc_p): Handle BUILT_IN_ALIGNED_ALLOC and
BUILT_IN_GOMP_ALLOC.
call_dealloc_p): Remove unused function.
(new_delete_mismatch_p): Call valid_new_delete_pair_p and rework.
(matching_alloc_calls_p): Handle built-in deallocation functions.
(warn_dealloc_offset): Corrct the handling of user-defined operators
delete.
(maybe_emit_free_warning): Avoid assuming expression is a decl.
Simplify.
* doc/extend.texi (attribute malloc): Update.
* tree-ssa-dce.c (valid_new_delete_pair_p): Factor code out into
valid_new_delete_pair_p in tree.c.
* tree.c (tree_inlined_location): Define new function.
(valid_new_delete_pair_p): Define.
* tree.h (tree_inlined_location): Declare.
(valid_new_delete_pair_p): Declare.
2020-12-14 Sebastian Pop <spop@amazon.com>
* config.gcc (aarch64*-*-*): Remove --with-{cpu,arch,tune}-32 flags.
2020-12-14 Wilco Dijkstra <wdijkstr@arm.com>
* config.gcc (aarch64*-*-*): Add --with-tune. Support --with-cpu=native.
* config/aarch64/aarch64.h (OPTION_DEFAULT_SPECS): Add --with-tune.
2020-12-14 Martin Liska <mliska@suse.cz>
* gcov.c (output_json_intermediate_file): Update comments.
2020-12-14 Tamar Christina <tamar.christina@arm.com>
PR middle-end/98264
* tree-vect-slp-patterns.c (linear_loads_p): Exclude TOP permute.
2020-12-14 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/mve.md (mve_vnegq_f): Use 'neg' instead of unspec.
(mve_vnegq_s): Likewise.
* config/arm/neon.md (neg<mode>2): Rename into neon_neg<mode>2.
(<absneg_str><mode>2): Rename into neon_<absneg_str><mode>2.
(neon_v<absneg_str><mode>): Call gen_neon_<absneg_str><mode>2.
(vashr<mode>3): Call gen_neon_neg<mode>2.
(vlshr<mode>3): Call gen_neon_neg<mode>2.
(neon_vneg<mode>): Call gen_neon_neg<mode>2.
* config/arm/unspecs.md (VNEGQ_F, VNEGQ_S): Remove.
* config/arm/vec-common.md (neg<mode>2): New expander.
2020-12-14 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/iterators.md (VDQNOTM2): New mode iterator.
(supf): Remove VMVNQ_S and VMVNQ_U.
(VMVNQ): Remove.
* config/arm/mve.md (mve_vmvnq_u<mode>): New entry for vmvn
instruction using expression not.
(mve_vmvnq_s<mode>): New expander.
* config/arm/neon.md (one_cmpl<mode>2): Renamed into
one_cmpl<mode>2_neon.
* config/arm/unspecs.md (VMVNQ_S, VMVNQ_U): Remove.
* config/arm/vec-common.md (one_cmpl<mode>2): New expander.
2020-12-14 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/iterators.md (supf): Remove VBICQ_S and VBICQ_U.
(VBICQ): Remove.
* config/arm/mve.md (mve_vbicq_u<mode>): New entry for vbic
instruction using expression and not.
(mve_vbicq_s<mode>): New expander.
(mve_vbicq_f<mode>): Replace use of unspec by 'and not'.
* config/arm/unspecs.md (VBICQ_S, VBICQ_U, VBICQ_F): Remove.
2020-12-14 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/iterators.md (supf): Remove VEORQ_S and VEORQ_U.
(VEORQ): Remove.
* config/arm/mve.md (mve_veorq_u<mode>): New entry for veor
instruction using expression xor.
(mve_veorq_s<mode>): New expander.
(mve_veorq_f<mode>): Use 'xor' code instead of unspec.
* config/arm/neon.md (xor<mode>3): Renamed into xor<mode>3_neon.
* config/arm/unspecs.md (VEORQ_S, VEORQ_U, VEORQ_F): Remove.
* config/arm/vec-common.md (xor<mode>3): New expander.
2020-12-14 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/aarch64/aarch64-cores.def (AARCH64_CORE): Add Cortex-A78C core.
* config/aarch64/aarch64-tune.md: Regenerate.
* doc/invoke.texi: Update docs.
2020-12-14 Nikhil Benesch <nikhil.benesch@gmail.com>
* godump.c (go_output_typedef): Suppress typedefs whose name
matches the tag of the underlying struct, union, or enum.
Output declarations for enums that do not appear in typedefs.
2020-12-13 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.c (vax_output_int_move): Unify push operation
selection.
2020-12-13 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.c (vax_output_int_move): Check the correct
operand for constant 0 push operation.
2020-12-13 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.c (vax_expand_addsub_di_operands): Handle equal
input operands with subtraction.
2020-12-13 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.c (vax_expand_addsub_di_operands): Handle the
addition or subtraction of 0.
2020-12-13 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.c (vax_expand_addsub_di_operands): Remove
unused register allocation.
2020-12-13 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (casesi): Use `gen_int_mode' rather than
`GEN_INT' for the immediate used for lower bound adjustment.
2020-12-13 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/98256
* tree-ssa-math-opts.c (match_uaddsub_overflow): For BIT_NOT_EXPR,
only handle a single use, and insert .ADD_OVERFLOW before the
comparison rather than after the BIT_NOT_EXPR. Return true iff
it is BIT_NOT_EXPR and it has been removed.
(math_opts_dom_walker::after_dom_children) <case BIT_NOT_EXPR>:
If match_uaddsub_overflow returned true, continue instead of break.
2020-12-13 Tamar Christina <tamar.christina@arm.com>
Revert:
2020-12-13 Tamar Christina <tamar.christina@arm.com>
* config/arm/arm_mve.h (__arm_vcaddq_rot90_u8, __arm_vcaddq_rot270_u8,
, __arm_vcaddq_rot90_s8, __arm_vcaddq_rot270_s8,
__arm_vcaddq_rot90_u16, __arm_vcaddq_rot270_u16, __arm_vcaddq_rot90_s16,
__arm_vcaddq_rot270_s16, __arm_vcaddq_rot90_u32,
__arm_vcaddq_rot270_u32, __arm_vcaddq_rot90_s32,
__arm_vcaddq_rot270_s32, __arm_vcmulq_rot90_f16,
__arm_vcmulq_rot270_f16, __arm_vcmulq_rot180_f16,
__arm_vcmulq_f16, __arm_vcaddq_rot90_f16, __arm_vcaddq_rot270_f16,
__arm_vcmulq_rot90_f32, __arm_vcmulq_rot270_f32,
__arm_vcmulq_rot180_f32, __arm_vcmulq_f32, __arm_vcaddq_rot90_f32,
__arm_vcaddq_rot270_f32, __arm_vcmlaq_f16, __arm_vcmlaq_rot180_f16,
__arm_vcmlaq_rot270_f16, __arm_vcmlaq_rot90_f16, __arm_vcmlaq_f32,
__arm_vcmlaq_rot180_f32, __arm_vcmlaq_rot270_f32,
__arm_vcmlaq_rot90_f32): Update builtin calls.
* config/arm/arm_mve_builtins.def (vcaddq_rot90_u, vcaddq_rot270_u,
vcaddq_rot90_s, vcaddq_rot270_s, vcaddq_rot90_f, vcaddq_rot270_f,
vcmulq_f, vcmulq_rot90_f, vcmulq_rot180_f, vcmulq_rot270_f,
vcmlaq_f, vcmlaq_rot90_f, vcmlaq_rot180_f, vcmlaq_rot270_f): Removed.
(vcaddq_rot90, vcaddq_rot270, vcmulq, vcmulq_rot90, vcmulq_rot180,
vcmulq_rot270, vcmlaq, vcmlaq_rot90, vcmlaq_rot180, vcmlaq_rot270):
New.
* config/arm/constraints.md (Dz): Include MVE.
* config/arm/iterators.md (mve_rotsplit1, mve_rotsplit2): New.
(rot): Add UNSPEC_VCMLS, UNSPEC_VCMUL and UNSPEC_VCMUL180.
(rot_op, rotsplit1, rotsplit2, fcmac1, VCMLA_OP, VCMUL_OP): New.
* config/arm/mve.md (VCADDQ_ROT270_S, VCADDQ_ROT90_S, VCADDQ_ROT270_U,
VCADDQ_ROT90_U, VCADDQ_ROT270_F, VCADDQ_ROT90_F, VCMULQ_F,
VCMULQ_ROT180_F, VCMULQ_ROT270_F, VCMULQ_ROT90_F, VCMLAQ_F,
VCMLAQ_ROT180_F, VCMLAQ_ROT90_F, VCMLAQ_ROT270_F, VCADDQ_ROT270_S,
VCADDQ_ROT270, VCADDQ_ROT90): Removed.
(mve_rot, VCMUL): New.
(mve_vcaddq_rot270_<supf><mode, mve_vcaddq_rot90_<supf><mode>,
mve_vcaddq_rot270_f<mode>, mve_vcaddq_rot90_f<mode>, mve_vcmulq_f<mode,
mve_vcmulq_rot180_f<mode>, mve_vcmulq_rot270_f<mode>,
mve_vcmulq_rot90_f<mode>, mve_vcmlaq_f<mode>, mve_vcmlaq_rot180_f<mode>,
mve_vcmlaq_rot270_f<mode>, mve_vcmlaq_rot90_f<mode>): Removed.
(mve_vcmlaq<mve_rot><mode>, mve_vcmulq<mve_rot><mode>,
mve_vcaddq<mve_rot><mode>, cadd<rot><mode>3, mve_vcaddq<mve_rot><mode>):
New.
(cmul<rot_op><mode>3): Exclude MVE types.
* config/arm/unspecs.md (UNSPEC_VCMUL90, UNSPEC_VCMUL270): New.
* config/arm/vec-common.md (cadd<rot><mode>3, cmul<rot_op><mode>3,
arm_vcmla<rot><mode>, cml<fcmac1><rot_op><mode>4): New.
* config/arm/unspecs.md (UNSPEC_VCMUL, UNSPEC_VCMUL180, UNSPEC_VCMLS,
UNSPEC_VCMLS180): New.
* config/arm/neon.md (cmul<rot_op><mode>3): New.
2020-12-13 Jakub Jelinek <jakub@redhat.com>
PR target/92469
* varasm.c (eliminable_regno_p): New function.
(make_decl_rtl): Reject asm vars for frame and argp
if they are different from hard frame pointer.
2020-12-13 Tamar Christina <tamar.christina@arm.com>
* config/arm/arm_mve.h (__arm_vcaddq_rot90_u8, __arm_vcaddq_rot270_u8,
, __arm_vcaddq_rot90_s8, __arm_vcaddq_rot270_s8,
__arm_vcaddq_rot90_u16, __arm_vcaddq_rot270_u16, __arm_vcaddq_rot90_s16,
__arm_vcaddq_rot270_s16, __arm_vcaddq_rot90_u32,
__arm_vcaddq_rot270_u32, __arm_vcaddq_rot90_s32,
__arm_vcaddq_rot270_s32, __arm_vcmulq_rot90_f16,
__arm_vcmulq_rot270_f16, __arm_vcmulq_rot180_f16,
__arm_vcmulq_f16, __arm_vcaddq_rot90_f16, __arm_vcaddq_rot270_f16,
__arm_vcmulq_rot90_f32, __arm_vcmulq_rot270_f32,
__arm_vcmulq_rot180_f32, __arm_vcmulq_f32, __arm_vcaddq_rot90_f32,
__arm_vcaddq_rot270_f32, __arm_vcmlaq_f16, __arm_vcmlaq_rot180_f16,
__arm_vcmlaq_rot270_f16, __arm_vcmlaq_rot90_f16, __arm_vcmlaq_f32,
__arm_vcmlaq_rot180_f32, __arm_vcmlaq_rot270_f32,
__arm_vcmlaq_rot90_f32): Update builtin calls.
* config/arm/arm_mve_builtins.def (vcaddq_rot90_u, vcaddq_rot270_u,
vcaddq_rot90_s, vcaddq_rot270_s, vcaddq_rot90_f, vcaddq_rot270_f,
vcmulq_f, vcmulq_rot90_f, vcmulq_rot180_f, vcmulq_rot270_f,
vcmlaq_f, vcmlaq_rot90_f, vcmlaq_rot180_f, vcmlaq_rot270_f): Removed.
(vcaddq_rot90, vcaddq_rot270, vcmulq, vcmulq_rot90, vcmulq_rot180,
vcmulq_rot270, vcmlaq, vcmlaq_rot90, vcmlaq_rot180, vcmlaq_rot270):
New.
* config/arm/constraints.md (Dz): Include MVE.
* config/arm/iterators.md (mve_rotsplit1, mve_rotsplit2): New.
(rot): Add UNSPEC_VCMLS, UNSPEC_VCMUL and UNSPEC_VCMUL180.
(rot_op, rotsplit1, rotsplit2, fcmac1, VCMLA_OP, VCMUL_OP): New.
* config/arm/mve.md (VCADDQ_ROT270_S, VCADDQ_ROT90_S, VCADDQ_ROT270_U,
VCADDQ_ROT90_U, VCADDQ_ROT270_F, VCADDQ_ROT90_F, VCMULQ_F,
VCMULQ_ROT180_F, VCMULQ_ROT270_F, VCMULQ_ROT90_F, VCMLAQ_F,
VCMLAQ_ROT180_F, VCMLAQ_ROT90_F, VCMLAQ_ROT270_F, VCADDQ_ROT270_S,
VCADDQ_ROT270, VCADDQ_ROT90): Removed.
(mve_rot, VCMUL): New.
(mve_vcaddq_rot270_<supf><mode, mve_vcaddq_rot90_<supf><mode>,
mve_vcaddq_rot270_f<mode>, mve_vcaddq_rot90_f<mode>, mve_vcmulq_f<mode,
mve_vcmulq_rot180_f<mode>, mve_vcmulq_rot270_f<mode>,
mve_vcmulq_rot90_f<mode>, mve_vcmlaq_f<mode>, mve_vcmlaq_rot180_f<mode>,
mve_vcmlaq_rot270_f<mode>, mve_vcmlaq_rot90_f<mode>): Removed.
(mve_vcmlaq<mve_rot><mode>, mve_vcmulq<mve_rot><mode>,
mve_vcaddq<mve_rot><mode>, cadd<rot><mode>3, mve_vcaddq<mve_rot><mode>):
New.
(cmul<rot_op><mode>3): Exclude MVE types.
* config/arm/unspecs.md (UNSPEC_VCMUL90, UNSPEC_VCMUL270): New.
* config/arm/vec-common.md (cadd<rot><mode>3, cmul<rot_op><mode>3,
arm_vcmla<rot><mode>, cml<fcmac1><rot_op><mode>4): New.
* config/arm/unspecs.md (UNSPEC_VCMUL, UNSPEC_VCMUL180, UNSPEC_VCMLS,
UNSPEC_VCMLS180): New.
* config/arm/neon.md (cmul<rot_op><mode>3): New.
2020-12-13 Tamar Christina <tamar.christina@arm.com>
* config/arm/arm.c (arm_preferred_simd_mode): Add E_HFmode.
2020-12-13 Tamar Christina <tamar.christina@arm.com>
* tree-vect-slp-patterns.c: New file.
* Makefile.in: Add it.
* doc/passes.texi: Document it.
* internal-fn.def (COMPLEX_ADD_ROT90, COMPLEX_ADD_ROT270): New.
* optabs.def (cadd90_optab, cadd270_optab): New.
* doc/md.texi: Document them.
* tree-vect-loop.c (vect_analyze_loop_2): Add dissolve code.
* tree-vect-slp.c:
(vect_free_slp_instance, vect_create_new_slp_node): Export.
(vect_match_slp_patterns_2, vect_match_slp_patterns): New.
(vect_analyze_slp): Use it.
* tree-vectorizer.h (vect_free_slp_tree): Export.
(enum _complex_operation): Forward declare.
(class vect_pattern): New
2020-12-13 Tamar Christina <tamar.christina@arm.com>
* tree-vect-patterns.c (vect_mark_pattern_stmts): Remove static inline.
* tree-vect-slp.c (vect_create_new_slp_node): Remove static and only
set smts if valid.
* tree-vectorizer.c (vec_info::add_pattern_stmt): New.
(vec_info::set_vinfo_for_stmt): Optionally enforce read-only.
* tree-vectorizer.h (struct _slp_tree): Use new types.
(lane_permutation_t, lane_permutation_t): New.
(vect_create_new_slp_node, vect_mark_pattern_stmts): New.
2020-12-13 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* doc/sourcebuild.texi (Commands for use in dg-final, Scan the
assembly output, scan-assembler-symbol-section): Document.
(scan-symbol-section): Document.
2020-12-13 Richard Sandiford <richard.sandiford@arm.com>
* is-a.h (reinterpret_is_a_helper): New class.
(static_is_a_helper): Likewise.
(is_a_helper): Inherit from reinterpret_is_a_helper.
(is_a_helper<const T *>): New specialization.
2020-12-13 Richard Sandiford <richard.sandiford@arm.com>
* coretypes.h (iterator_range): Move to...
* iterator-utils.h: ...this new file.
2020-12-13 Richard Sandiford <richard.sandiford@arm.com>
* rtlanal.c (noop_move_p): Don't check for REG_EQUAL notes.
2020-12-13 Richard Sandiford <richard.sandiford@arm.com>
* vec.h (vnull::operator vec<T, A, L>): Make const.
2020-12-12 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96685
* match.pd (~(X - Y) -> ~X + Y): New optimization.
(~X + Y -> (Y - X) - 1): Likewise.
2020-12-12 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96272
* tree-ssa-math-opts.c (uaddsub_overflow_check_p): Add OTHER argument.
Handle BIT_NOT_EXPR.
(match_uaddsub_overflow): Optimize unsigned a > ~b into
__imag__ .ADD_OVERFLOW (a, b).
(math_opts_dom_walker::after_dom_children): Call match_uaddsub_overflow
even for BIT_NOT_EXPR.
2020-12-12 Jakub Jelinek <jakub@redhat.com>
PR middle-end/98183
* omp-low.c (lower_omp_target): Don't add OMP_RETURN for
data regions.
* omp-expand.c (expand_omp_target): Don't try to remove
OMP_RETURN for data regions.
(build_omp_regions_1, omp_make_gimple_edges): Don't expect
OMP_RETURN for data regions.
2020-12-11 Nathan Sidwell <nathan@acm.org>
* gcc.c (cpp_unique_options): Add Mmodules, Mno-modules.
* tree-core.h (enum tree_index): Add TI_MODULE_HWM.
2020-12-11 Jim Wilson <jimw@sifive.com>
* varasm.c (get_section): Add DECL_P check before DECL_PRESERVE_P.
2020-12-11 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/iterators.md (VDQ): Remove TARGET_HAVE_MVE
conditions.
* config/arm/vec-common.md (and<mode>3): Use
ARM_HAVE_<MODE>_ARITH.
(ior<mode>3): Likewise.
2020-12-11 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.c (arc_active_insn): Ignore all non essential
instructions when getting the next active instruction.
(check_store_cacheline_hazard): Update.
(workaround_arc_anomaly): Remove obsolete cache hazard code.
2020-12-11 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.c (arc_reorg): Avoid limm in BRcc.
2020-12-11 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc-protos.h (arc_scheduling_not_expected): Remove
it.
(arc_sets_cc_p): Likewise.
(arc_need_delay): Likewise.
* config/arc/arc.c (arc_sets_cc_p): Likewise.
(arc_need_delay): Likewise.
(arc_scheduling_not_expected): Likewise.
* config/arc/arc.md: Convert adc/sbc patterns to simple
instruction definitions.
2020-12-11 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/iterators.md (supf): Remove VORRQ_S and VORRQ_U.
(VORRQ): Remove.
* config/arm/mve.md (mve_vorrq_s<mode>): New entry for vorr
instruction using expression ior.
(mve_vorrq_u<mode>): New expander.
(mve_vorrq_f<mode>): Use ior code instead of unspec.
* config/arm/neon.md (ior<mode>3): Renamed into ior<mode>3_neon.
* config/arm/predicates.md (imm_for_neon_logic_operand): Enable
for MVE.
* config/arm/unspecs.md (VORRQ_S, VORRQ_U, VORRQ_F): Remove.
* config/arm/vec-common.md (ior<mode>3): New expander.
2020-12-11 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.md (mpyd<su_optab>_arcv2hs): New template
pattern.
(*pmpyd<su_optab>_arcv2hs): Likewise.
(*pmpyd<su_optab>_imm_arcv2hs): Likewise.
(mpyd_arcv2hs): Moved into above template.
(mpyd_imm_arcv2hs): Moved into above template.
(mpydu_arcv2hs): Likewise.
(mpydu_imm_arcv2hs): Likewise.
(su_optab): New optab prefix for sign/zero-extending operations.
2020-12-11 H.J. Lu <hjl.tools@gmail.com>
PR target/98219
* config/i386/uintrintrin.h (__uintr_frame): Remove uirrv.
2020-12-11 Andrea Corallo <andrea.corallo@arm.com>
* doc/sourcebuild.texi (arm_softfloat): Improve documentation.
2020-12-11 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/98229
* optabs.c (expand_doubleword_mod): Canonicalize op1 and
1 - INTVAL (op1) as word_mode constants when used in
word_mode arithmetics.
2020-12-11 Richard Biener <rguenther@suse.de>
PR tree-optimization/98235
* tree-vect-slp.c (vect_build_slp_tree): Exchange npermutes
for limit. Decrement that for each cache miss and fail
discovery when it reaches zero.
(vect_build_slp_tree_2): Remove npermutes handling and
simply pass down limit.
(vect_build_slp_instance): Use pass down limit.
(vect_analyze_slp_instance): Likewise.
(vect_analyze_slp): Base the SLP discovery limit on
max_tree_size and pass it down.
2020-12-11 Jakub Jelinek <jakub@redhat.com>
PR middle-end/98190
* expr.c (expand_assignment): If to_rtx is a promoted SUBREG,
ensure sign or zero extension either through use of store_expr
or by extending manually.
2020-12-11 Andrea Corallo <andrea.corallo@arm.com>
PR rtl-optimization/97092
* ira-color.c (update_costs_from_allocno): Do not carry over mode
between subsequent iterations.
2020-12-11 Richard Biener <rguenther@suse.de>
PR tree-optimization/95582
* tree-vect-patterns.c (vect_recog_bool_pattern): Check
for VECT_SCALAR_BOOLEAN_TYPE_P, not just precision one.
2020-12-11 Hongyu <hongyu.wang@intel.com>
* common/config/i386/cpuinfo.h (get_available_features):
Move check for HRESET/AVX_VNNI/UINTR out of avx512_usable.
2020-12-10 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/98212
* dojump.c (do_compare_rtx_and_jump): Change computation of
first_prob for and_them. Add comment explaining and_them case.
2020-12-10 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/98174
* gimple-range-cache.cc (ranger_cache::ssa_range_in_bb): Only push
poor values to be examined if it isn't a pure global.
(ranger_cache::block_range): Don't process pure globals.
(ranger_cache::fill_block_cache): Adjust has_edge_range call.
* gimple-range-gori.cc (gori_map::all_outgoing): New bitmap.
(gori_map::gori_map): Allocate all_outgoing.
(gori_map::is_export_p): No specified BB returns global context.
(gori_map::calculate_gori): Accumulate each block into global.
(gori_compute::gori_compute): Preprocess each block for exports.
(gori_compute::has_edge_range_p): No edge returns global context.
* gimple-range-gori.h (has_edge_range_p): Provide default parameter.
2020-12-10 Eric Botcazou <ebotcazou@adacore.com>
* dwarf2out.c (loc_list_from_tree_1) <PLACEHOLDER_EXPR>: Deal with
a nested context type
2020-12-10 Bernd Edlinger <bernd.edlinger@hotmail.de>
* cfgexpand.c (expand_gimple_basic_block): Remove special handling
of debug_inline_entries without block info.
* tree-inline.c (remap_gimple_stmt): Drop debug_nonbind_markers when
the call statement has no block info.
(copy_debug_stmt): Remove debug_nonbind_markers when inlining
and the block info is mapped to NULL.
* tree-ssa-live.c (clear_unused_block_pointer): Remove
debug_nonbind_markers originating from removed inline functions.
2020-12-10 Richard Biener <rguenther@suse.de>
* tree-vect-stmts.c (vectorizable_assignment): Remove special
allowance of VECTOR_BOOLEAN_TYPE_P conversions.
2020-12-10 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/iterators.md (supf): Remove VANDQ_S and VANDQ_U.
(VANQ): Remove.
(VDQ): Add TARGET_HAVE_MVE condition where relevant.
* config/arm/mve.md (mve_vandq_u<mode>): New entry for vand
instruction using expression 'and'.
(mve_vandq_s<mode>): New expander.
(mve_vaddq_n_f<mode>): Use 'and' code instead of unspec.
* config/arm/neon.md (and<mode>3): Rename into and<mode>3_neon.
* config/arm/predicates.md (imm_for_neon_inv_logic_operand):
Enable for MVE.
* config/arm/unspecs.md (VANDQ_S, VANDQ_U, VANDQ_F): Remove.
* config/arm/vec-common.md (and<mode>3): New expander.
2020-12-10 Richard Sandiford <richard.sandiford@arm.com>
PR tree-optimization/98069
* tree-data-ref.c (compute_distributive_range): New function.
(nop_conversion_for_offset_p): Likewise.
(split_constant_offset): In the internal overload, treat integer
expressions as having an implicit cast to sizetype and express
them accordingly. Pass back the range of the original (uncast)
expression in a new range parameter.
(split_constant_offset_1): Likewise. Rework the handling of
conversions to account for the implicit sizetype casts.
2020-12-10 Joel Hutton <joel.hutton@arm.com>
PR tree-optimization/97929
* tree-vect-data-refs.c (vect_get_smallest_scalar_type): Add
WIDEN_PLUS/WIDEN_MINUS case.
2020-12-10 Joel Hutton <joel.hutton@arm.com>
* tree-pretty-print.c (dump_generic_node): Add case for
VEC_WIDEN_(PLUS/MINUS)_(HI/LO)_EXPR and WIDEN_(PLUS/MINUS)_EXPR.
2020-12-10 Richard Biener <rguenther@suse.de>
PR tree-optimization/98211
* tree-vect-stmts.c (vectorizable_assignment): Disallow
invalid conversions to bool vector types.
2020-12-10 Alexandre Oliva <oliva@adacore.com>
* tree.c (build_common_builtin_nodes): Drop __builtin_ from
__clear_cache libname.
2020-12-10 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/98212
* dojump.c (do_compare_rtx_and_jump): When splitting NE and backend
can do UNEQ, prefer splitting x != y into x unord y || !(x uneq y)
instead of into x unord y || x ltgt y.
2020-12-10 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/98169
* dojump.c (do_compare_rtx_and_jump): Don't split self-EQ/NE
comparisons, just use ORDERED or UNORDERED.
2020-12-10 Jakub Jelinek <jakub@redhat.com>
PR middle-end/98205
* omp-expand.c (expand_omp_for_generic): Fix up broken_loop handling.
2020-12-10 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_get_and_check_slp_defs): Do
not mark the defs to occur in a pattern if it is the
pattern root and record the original stmt defs in that
case.
2020-12-10 Simon Cook <simon.cook@embecosm.com>
* config/riscv/multilib-generator (arch_canonicalize): Invoke
python interpreter when calling arch-canonicalize script.
2020-12-10 Nikhil Benesch <nikhil.benesch@gmail.com>
* godump.c (go_format_type): Don't consider whether a type has
been seen when determining whether to output a type by name.
Consider only the use_type_name parameter.
(go_output_typedef): When outputting a typedef, format the
declaration's original type, which contains the name of the
underlying type rather than the name of the typedef.
2020-12-09 Jakub Jelinek <jakub@redhat.com>
PR bootstrap/98188
* tree-ssa-phiopt.c (two_value_replacement): Don't special case
BOOLEAN_TYPEs for ranges, instead if get_range_info doesn't return
VR_RANGE, set min/max to wi::min/max_value.
2020-12-09 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/aarch64/aarch64-option-extensions.def
(AARCH64_OPT_EXTENSION): New +pauth option in -march for AArch64.
* config/aarch64/aarch64.h (AARCH64_FL_PAUTH): New pauth extension bitmask.
(AARCH64_ISA_PUATH): New ISA bitmask for PAUTH.
(AARCH64_FL_FOR_ARCH8_3): Add PAUTH to Armv8.3-A.
(TARGET_PAUTH): New target mask to isolate PAUTH instructions.
* config/aarch64/aarch64.md (do_return): Condition set to TARGET_PAUTH.
* doc/invoke.texi: Update docs for +flagm and +pauth.
2020-12-09 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386.h (REG_ALLOC_ORDER): Remove
2020-12-09 Richard Biener <rguenther@suse.de>
PR tree-optimization/98213
* tree-ssa-loop-im.c (sm_seq_valid_bb): Cache successfully
processed PHIs.
(hoist_memory_references): Adjust.
2020-12-09 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/aarch64/aarch64-protos.h (cpu_vector_cost): Move simd
fields to...
(simd_vec_cost): ... Here. Define.
(advsimd_vec_cost): Define.
(sve_vec_cost): Define.
* config/aarch64/aarch64.c (generic_advsimd_vector_cost):
Define.
(generic_sve_vector_cost): Likewise.
(generic_vector_cost): Update.
(qdf24xx_advsimd_vector_cost): Define.
(qdf24xx_vector_cost): Update.
(thunderx_advsimd_vector_cost): Define.
(thunderx_vector_cost): Update.
(tsv110_advsimd_vector_cost): Define.
(tsv110_vector_cost): Likewise.
(cortexa57_advsimd_vector_cost): Define.
(cortexa57_vector_cost): Update.
(exynosm1_advsimd_vector_cost): Define.
(exynosm1_vector_cost): Update.
(xgene1_advsimd_vector_cost): Define.
(xgene1_vector_cost): Update.
(thunderx2t99_advsimd_vector_cost): Define.
(thunderx2t99_vector_cost): Update.
(thunderx3t110_advsimd_vector_cost): Define.
(thunderx3t110_vector_cost): Update.
(aarch64_builtin_vectorization_cost): Handle sve and advsimd
vector cost fields.
2020-12-09 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/98199
* fold-const.c (native_encode_initializer): Fix handling bit-fields
when off > 0.
2020-12-09 Jakub Jelinek <jakub@redhat.com>
PR c++/98193
* fold-const.c (native_encode_initializer): Set pos to field's
byte position if iterating over a field with missing initializer.
2020-12-08 Martin Liska <mliska@suse.cz>
PR tree-optimization/98182
* gimple-if-to-switch.cc (pass_if_to_switch::execute): Request
chain linkage through false edges only.
2020-12-08 Nathan Sidwell <nathan@acm.org>
* tree.h (DECL_ALIGN_RAW): New.
(DECL_ALIGN): Use it.
(DECL_WARN_IF_NOT_ALIGN_RAW): New.
(DECL_WARN_IF_NOT_ALIGN): Use it.
(SET_DECL_WARN_IF_NOT_ALIGN): Likewise.
2020-12-08 Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>
PR target/66791
* config/arm/arm_neon.h: Replace calls to __builtin_vmvn* by ~
in vmvn intrinsics.
* config/arm/arm_neon_builtins.def: Remove entry for vmvn.
2020-12-08 Jakub Jelinek <jakub@redhat.com>
PR target/94440
* config/i386/i386.opt (ix86_excess_precision,
ix86_unsafe_math_optimizations): New TargetVariables.
* config/i386/i386.h (X87_ENABLE_ARITH, X87_ENABLE_FLOAT): Use
ix86_unsafe_math_optimizations instead of
flag_unsafe_math_optimizations and ix86_excess_precision instead of
flag_excess_precision.
* config/i386/i386.c (ix86_excess_precision): Rename to ...
(ix86_get_excess_precision): ... this.
(TARGET_C_EXCESS_PRECISION): Define to ix86_get_excess_precision.
* config/i386/i386-options.c (ix86_valid_target_attribute_tree,
ix86_option_override_internal): Update ix86_unsafe_math_optimization
from flag_unsafe_math_optimizations and ix86_excess_precision
from flag_excess_precision when constructing target option nodes.
(ix86_set_current_function): If flag_unsafe_math_optimizations
or flag_excess_precision is different from the one recorded
in TARGET_OPTION_NODE, create a new target option node for the
current function and switch to that.
2020-12-08 Richard Biener <rguenther@suse.de>
PR tree-optimization/98192
* tree-vect-slp.c (vect_build_slp_instance): Get scalar_stmts
by reference.
2020-12-08 Richard Biener <rguenther@suse.de>
PR tree-optimization/98191
* tree-vect-slp.c (vect_slp_check_for_constructors): Do not
follow a non-SSA def chain.
2020-12-08 Richard Biener <rguenther@suse.de>
PR tree-optimization/97559
* tree-ssa-sink.c (statement_sink_location): Never ignore
PHIs on sink paths in irreducible regions.
2020-12-08 Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>
PR target/97872
* gimple-isel.cc (gimple_expand_vec_cond_expr): Try to fold
x CMP y ? -1 : 0 to x CMP y.
2020-12-08 Richard Biener <rguenther@suse.de>
PR tree-optimization/98180
* tree-vect-slp.c (vect_slp_check_for_constructors): Check the
first inserted value has a def.
2020-12-08 Eric Botcazou <ebotcazou@adacore.com>
PR tree-optimization/96344
* tree-switch-conversion.c (bit_test_cluster::emit): Compute the
range only if an entry test is necessary. Merge the entry test in
the bit test when possible. Use PREC local variable consistently.
When there is only one test, do a single gimplification at the end.
2020-12-08 Kito Cheng <kito.cheng@sifive.com>
PR target/98152
* config.gcc (riscv*-*-*): Checking python, python3 or python2
is available, and skip doing with_arch canonicalize if no python
available.
2020-12-07 Jakub Jelinek <jakub@redhat.com>
PR target/98147
* builtins.c (default_emit_call_builtin___clear_cache): Call
convert_memory_address to ptr_mode on both begin and end.
2020-12-07 Bernd Edlinger <bernd.edlinger@hotmail.de>
* ipa-param-manipulation.c
(ipa_param_body_adjustments::modify_call_stmt): Set location info.
2020-12-07 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* doc/extend.texi (used function attribute): Document saving
the declaration from linker garbage collection.
(used variable attribute): Likewise.
2020-12-07 Richard Biener <rguenther@suse.de>
PR tree-optimization/98113
* tree-vectorizer.h (struct slp_root): New.
(_bb_vec_info::roots): New member.
* tree-vect-slp.c (vect_analyze_slp): Also walk BB info
roots.
(_bb_vec_info::_bb_vec_info): Adjust.
(_bb_vec_info::~_bb_vec_info): Likewise.
(vld_cmp): New.
(vect_slp_is_lane_insert): Likewise.
(vect_slp_check_for_constructors): Match a series of
BIT_INSERT_EXPRs as vector constructor.
(vect_slp_analyze_bb_1): Continue if BB info roots is
not empty.
(vect_slp_analyze_bb_1): Mark the whole BIT_INSERT_EXPR root
sequence as pure_slp.
2020-12-07 Richard Biener <rguenther@suse.de>
PR tree-optimization/98117
* tree-vect-loop-manip.c (vect_gen_vector_loop_niters):
Properly handle degenerate niter when setting the vector
loop IV range.
2020-12-07 Andreas Krebbel <krebbel@linux.ibm.com>
* config/s390/s390.c (s390_emit_stack_probe): Change Pmode to
word_mode.
2020-12-07 Martin Jambor <mjambor@suse.cz>
PR ipa/97816
* ipa-cp.c (safe_add): Removed.
(good_cloning_opportunity_p): Remove special handling of INT_MAX.
(value_topo_info<valtype>::propagate_effects): Take care not to
propagate from size one value to another through more sources. Scale
propagated times with edge frequencies. Include local time and size
in propagates ones here. Take care not to overflow size.
(decide_about_value): Do not add local and propagated effects when
passing them to good_cloning_opportunity_p.
2020-12-07 Matthias Klose <doko@ubuntu.com>
* genextract.c (print_header): Undefine ENABLE_RTL_CHECKING
and ENABLE_RTL_FLAG_CHECKING.
2020-12-07 Richard Biener <rguenther@suse.de>
PR tree-optimization/98137
* tree-data-ref.c (split_constant_offset_1): Use
determine_value_range instead of get_range_info to handle
arbitrary expressions.
2020-12-06 H.J. Lu <hjl.tools@gmail.com>
PR target/98162
* doc/extend.texi: Remove -mcet.
2020-12-06 H.J. Lu <hjl.tools@gmail.com>
PR target/98161
* config/i386/i386-features.c (pseudo_reg_set): Check mode of
pseudo register push.
2020-12-06 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96232
* tree-ssa-phiopt.c (two_value_replacement): Optimize even boolean lhs
cases as long as arg0 has wider precision and conditional_replacement
doesn't handle that case.
(tree_ssa_phiopt_worker): Don't call two_value_replacement during
early phiopt.
2020-12-06 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96232
* match.pd (-(type)!A -> (type)A - 1): New optimization.
2020-12-05 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
David Edelsohn <dje.gcc@gmail.com>
* config/rs6000/xcoff.h (ASM_OUTPUT_DEF): Reference macro arguments.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
PR target/95294
* config/vax/elf.h (REGISTER_NAMES): Append `%psl'.
* config/vax/vax-modes.def (CCN, CCNZ, CCZ): New modes.
* config/vax/vax-protos.h (vax_select_cc_mode): New prototype.
(vax_maybe_split_dimode_move): Likewise.
(vax_notice_update_cc): Remove prototype.
* config/vax/vax.c (TARGET_FLAGS_REGNUM): New macro.
(TARGET_CC_MODES_COMPATIBLE): Likewise.
(TARGET_MD_ASM_ADJUST): Likewise.
(vax_select_cc_mode): New function
(vax_cc_modes_compatible): Likewise.
(vax_md_asm_adjust): Likewise.
(vax_notice_update_cc): Remove function.
(vax_output_int_move): Factor out code checking if a DImode move
may have to be split...
(vax_maybe_split_dimode_move): ... into this new function.
* config/vax/vax.h (FIRST_PSEUDO_REGISTER): Bump up.
(FIXED_REGISTERS): Append an entry for PSL.
(CALL_USED_REGISTERS): Likewise.
(NOTICE_UPDATE_CC, OUTPUT_JUMP): Remove macros.
(SELECT_CC_MODE): New macro.
(REGISTER_NAMES): Append `psl'.
* config/vax/predicates.md (const_zero_operand)
(vax_cc_comparison_operator, vax_ccn_comparison_operator)
(vax_ccnz_comparison_operator, vax_ccz_comparison_operator):
New predicates.
* config/vax/builtins.md: Rewrite for MODE_CC representation.
* config/vax/vax.md: Likewise.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/elf.h (VAX_CC1_SPEC, VAX_CC1PLUS_SPEC): New macros.
* config/vax/netbsd-elf.h (CC1_SPEC): Use VAX_CC1_SPEC rather
than VAX_CC1_AND_CC1PLUS_SPEC.
(CC1PLUS_SPEC): Use VAX_CC1PLUS_SPEC rather than
VAX_CC1_AND_CC1PLUS_SPEC.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/pdp11/pdp11.md (fcc_cc, fcc_ccnz): Use
`const_double_zero' to express double zero constant.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* read-rtl.c (rtx_reader::read_rtx_code): Handle syntactic
`const_double_zero' rtx.
* doc/rtl.texi (Constant Expression Types): Document it.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (divmoddisi4, *amulsi4): Make the comment
notation consistent with the rest of the file.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (movti): Fix output predicate. Emit `movo'
rather than `movh'.
(divmoddisi4): Fix output predicates, correct RTL.
(*amulsi4): Name insn. Fix output predicate.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (mulsidi3): Fix the multiplicand predicates.
(*maddsidi4, *maddsidi4_const): Likewise. Name insns.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (*cmpv_2): Name insn.
(*cmpv, *cmpzv, *cmpzv_2): Likewise. Fix location predicate and
constraint.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (extv): Rename insn to...
(*extv): ... this.
(extv): New expander.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (*insv_aligned, *extzv_aligned)
(*extv_aligned): Also make sure the memory address of a bit-field
location can be adjusted in the PIC mode.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (*insv_aligned, *extzv_aligned)
(*extv_aligned): Reject register bit-field locations that are not
aligned to the least significant bit; update output statement
accordingly.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (*insv_aligned, *extzv_aligned)
(*extv_aligned, *extv_non_const, *extzv_non_const): Name insns.
Fix location predicate.
(*extzv): Name insn.
(*insv): Likewise. Fix location constraint.
(*insv_2): Likewise, and the predicate.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (cpymemhi1): Rename insn to...
(movmemhi1): ... this.
(cpymemhi): Update accordingly. Remove constraints.
(movmemhi): New expander.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/builtins.md: Add a peephole2 for QImode and HImode
`ctz' operations.
(any_extend): New code iterator.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/builtins.md (width): New mode attribute.
(ffssi2): Rework expander into...
(ffs<mode>2): ... this.
(ctzsi2): Rework insn into...
(ctz<mode>2): ... this.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/builtins.md (ffssi2_internal): Rename insn to...
(ctzsi2): ... this. Update the RTL operation.
(ffssi2): Update accordingly.
* config/vax/vax.c (vax_notice_update_cc): Handle CTZ.
* config/vax/vax.h (CTZ_DEFINED_VALUE_AT_ZERO): New macro.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md: Include `builtins.md'.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/predicates.md (volatile_mem_operand)
(any_memory_operand): New predicates.
* config/vax/builtins.md (VUNSPEC_UNLOCK): Remove constant.
(sync_lock_test_and_set<mode>): Remove `set' and `unspec'
operations, match operands only. Reformat.
(sync_lock_release<mode>): Likewise. Remove cruft.
(jbb<ccss>i<mode>): Wrap into `unspec_volatile', use
`any_memory_operand' predicate.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/builtins.md (bit): New int iterator.
(ccss): New int attribute.
(jbbssi<mode>, jbbcci<mode>): Fold insns into...
(jbb<ccss>i<mode>): ... this.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/builtins.md (bb_mem): New mode attribute.
(jbbssiqi, jbbssihi, jbbssisi): Fold insns into...
(jbbssi<mode>): ... this.
(jbbcciqi, jbbccihi, jbbccisi): Likewise...
(jbbcci<mode>): ... this.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* jump.c (pc_set): Also accept a jump wrapped in UNSPEC or
UNSPEC_VOLATILE.
(any_uncondjump_p, any_condjump_p): Update comment accordingly.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* loop-doloop.c (add_test): Only remove the jump if `onlyjump_p'.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* cfgrtl.c (rtl_block_empty_p): Return false if `!onlyjump_p'
too.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* sel-sched-ir.c (maybe_tidy_empty_bb): Only try to remove a
conditional jump if `onlyjump_p'.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* loop-iv.c (simplify_using_initial_values): Only process jumps
that match `onlyjump_p'.
(check_simple_exit): Likewise.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* ifcvt.c (dead_or_predicable) [!IFCVT_MODIFY_TESTS]: Bail out
if `!onlyjump_p'.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* read-rtl.c: Add a page-feed separator at the start of iterator
code.
(struct iterator_group): Change the return type to HOST_WIDE_INT
for the `find_builtin' member. Likewise the second parameter
type for the `apply_iterator' member.
(atoll) [!HAVE_ATOQ]: Reorder.
(find_mode, find_code): Change the return type to HOST_WIDE_INT.
(apply_mode_iterator, apply_code_iterator)
(apply_subst_iterator): Change the second parameter type to
HOST_WIDE_INT.
(find_int): Handle input suitable for HOST_WIDE_INT output.
(apply_int_iterator): Rewrite in terms of explicit format
interpretation.
(rtx_reader::read_rtx_operand) <'w'>: Fold into...
<'i', 'n', 'p'>: ... this.
* doc/md.texi (Int Iterators): Document 'w' rtx format support.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/builtins.md (ffssi2): Make preparation statements
actually buildable.
(ffssi2_internal): Fix input constraints; make the RTL pattern
match reality for `cc0'.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.c (vax_address_cost): Express the cost in terms
of COSTS_N_INSNS.
(vax_rtx_costs): Likewise.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/constraints.md (A): New constraint.
* config/vax/predicates.md (external_symbolic_operand)
(external_const_operand): Remove predicates.
(local_symbolic_operand): Rename to...
(pic_symbolic_operand): ... this, and rework.
(external_memory_operand): Rename to...
(non_pic_external_memory_operand): ... this, and rework.
(illegal_blk_memory_operand, illegal_addsub_di_memory_operand):
Update accordingly.
* config/vax/vax-protos.h (vax_acceptable_pic_operand_p): New
prototype.
* config/vax/vax.c (vax_acceptable_pic_operand_p): New function.
(vax_output_int_add): Update according to predicate rework.
* config/vax/vax.h (LEGITIMATE_PIC_OPERAND_P): New macro.
* config/vax/vax.md (pushlclsymreg, pushextsymreg): Fold
together, and rename to...
(*pushsymreg): ... this. Use the `pic_symbolic_operand'
predicate and the `A' constraint for the displacement operand.
(movlclsymreg, movextsymreg): Fold together, and rename to...
(*movsymreg): ... this. Use the `pic_symbolic_operand'
predicate and the `A' constraint for the displacement operand.
(pushextsym, pushlclsym): Fold together, and rename to...
(*pushsym): ... this. Use the `pic_symbolic_operand' predicate
and the `A' constraint for the displacement operand.
(movextsym, movlclsym): Fold together, and rename to...
(*movsym): ... this. Use the `pic_symbolic_operand' predicate
and the `A' constraint for the displacement operand.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.c (print_operand): Replace `c' and `C' with
`k' and `K' respectively.
* config/vax/vax.md (*branch, *branch_reversed): Update
accordingly.
2020-12-05 Matt Thomas <matt@3am-software.com>
Maciej W. Rozycki <macro@linux-mips.org>
PR target/58901
* reload.c (push_reload): Also reload the inner expression of a
SUBREG for pseudos associated with a mode-dependent memory
reference.
(find_reloads): Force a reload likewise.
2020-12-05 Roman Zhuykov <zhroma@ispras.ru>
PR rtl-optimization/97421
* modulo-sched.c (generate_prolog_epilog): Remove forward
declaration, adjust last argument name and type.
(const_iteration_count): Add bool pointer parameter to return
whether count register is read in pre-header after its
initialization.
(sms_schedule): Fix count register initialization adjustment
procedure according to what const_iteration_count said.
2020-12-05 Iain Sandoe <iain@sandoe.co.uk>
PR target/97865
* configure: Regenerate.
2020-12-05 Venkataramanan Kumar <Venkataramanan.Kumar@amd.com>
Sharavan Kumar <Shravan.Kumar@amd.com>
* common/config/i386/cpuinfo.h (get_amd_cpu) recognize znver3.
* common/config/i386/i386-common.c (processor_names): Add
znver3.
(processor_alias_table): Add znver3 and AMDFAM19H entry.
* common/config/i386/i386-cpuinfo.h (processor_types): Add
AMDFAM19H.
(processor_subtypes): AMDFAM19H_ZNVER3.
* config.gcc (i[34567]86-*-linux* | ...): Likewise.
* config/i386/driver-i386.c: (host_detect_local_cpu): Let
-march=native recognize znver3 processors.
* config/i386/i386-c.c (ix86_target_macros_internal): Add
znver3.
* config/i386/i386-options.c (m_znver3): New definition.
(m_ZNVER): Include m_znver3.
(processor_cost_table): Add znver3.
* config/i386/i386.c (ix86_reassociation_width): Likewise.
* config/i386/i386.h (TARGET_znver3): New definition.
(enum processor_type): Add PROCESSOR_ZNVER3.
* config/i386/i386.md (define_attr "cpu"): Add znver3.
* config/i386/x86-tune-sched.c: (ix86_issue_rate): Likewise.
(ix86_adjust_cost): Likewise.
* config/i386/x86-tune.def (X86_TUNE_AVOID_256FMA_CHAINS:
Likewise.
* config/i386/znver1.md: Add new reservations for znver3.
* doc/extend.texi: Add details about znver3.
* doc/invoke.texi: Likewise.
2020-12-05 Jakub Jelinek <jakub@redhat.com>
PR target/96226
* config/i386/i386.md (splitter after *<rotate_insn><mode>3_mask,
splitter after *<rotate_insn><mode>3_mask_1): Drop the masking from
the patterns to split into.
2020-12-04 Jason Merrill <jason@redhat.com>
* vec.h (begin, end): Add overloads for vec*.
* tree.c (build_constructor_from_vec): Remove *.
2020-12-04 David Edelsohn <dje.gcc@gmail.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Change PTR_SIZE to POINTER_SIZE_UNITS.
2020-12-04 Hans-Peter Nilsson <hp@axis.com>
Martin Sebor <msebor@redhat.com>
PR middle-end/94600
* doc/implement-c.texi (Qualifiers implementation): Add blurb
about access to the whole of a volatile aggregate object, only for
same-size as a scalar object.
2020-12-04 Jakub Jelinek <jakub@redhat.com>
PR c++/98130
* gimple.c (gimple_call_fnspec): Only return ".co " for replaceable
operator delete or ".mC" for replaceable operator new called from
new/delete.
2020-12-04 Jakub Jelinek <jakub@redhat.com>
PR target/96226
* config/i386/i386.md (splitter after *<rotate_insn><mode>3_mask,
splitter after *<rotate_insn><mode>3_mask_1): New combine splitters.
2020-12-04 Jakub Jelinek <jakub@redhat.com>
PR libstdc++/93121
* fold-const.c (native_encode_initializer): Use build_zero_cst
instead of build_constructor.
2020-12-04 Jakub Jelinek <jakub@redhat.com>
PR target/98100
* cfgexpand.c (expand_gimple_basic_block): For vars with
vector type, use TYPE_MODE rather than DECL_MODE.
2020-12-04 Jakub Jelinek <jakub@redhat.com>
* common.opt (-gdwarf32, -gdwarf64): New options.
* config/rs6000/rs6000.c (rs6000_option_override_internal): Default
dwarf_offset_size to 8 if not overridden from the command line.
* dwarf2out.c: Change all occurrences of DWARF_OFFSET_SIZE to
dwarf_offset_size.
* doc/invoke.texi (-gdwarf32, -gdwarf64): Document.
2020-12-04 Martin Liska <mliska@suse.cz>
* doc/tm.texi: Change argument of the record_gcc_switches
hook and remove SWITCH_TYPE_* enum values.
* dwarf2out.c (gen_producer_string): Move to opts.c and remove
handling of the dwarf_record_gcc_switches option.
(dwarf2out_early_finish): Use moved gen_producer_string
function.
* opts.c (gen_producer_string): New.
* opts.h (gen_producer_string): New.
* target.def: Change type of record_gcc_switches.
* target.h (enum print_switch_type): Remove.
(elf_record_gcc_switches): Change first argument.
* toplev.c (MAX_LINE): Remove.
(print_to_asm_out_file): Likewise.
(print_to_stderr): Likewise.
(print_single_switch): Likewise.
(print_switch_values): Likewise.
(init_asm_output): Use new gen_producer_string function.
(process_options): Likewise.
* varasm.c (elf_record_gcc_switches): Just save the string argument
to the ELF container.
2020-12-04 Eric Botcazou <ebotcazou@adacore.com>
* ipa-sra.c (verify_access_tree_1): Relax assertion on the size.
2020-12-04 Martin Liska <mliska@suse.cz>
* doc/invoke.texi: Add missing params.
2020-12-03 Martin Sebor <msebor@redhat.com>
PR c++/90629
PR middle-end/94527
* builtins.c (access_ref::access_ref): Initialize new member.
(compute_objsize): Use access_ref::deref. Handle simple pointer
assignment.
(expand_builtin): Remove handling of the free built-in.
(call_dealloc_argno): Same.
(find_assignment_location): New function.
(fndecl_alloc_p): Same.
(gimple_call_alloc_p): Same.
(call_dealloc_p): Same.
(matching_alloc_calls_p): Same.
(warn_dealloc_offset): Same.
(maybe_emit_free_warning): Same.
* builtins.h (struct access_ref): Declare new member.
(maybe_emit_free_warning): Make extern. Make use of access_ref.
Handle -Wmismatched-new-delete.
* calls.c (initialize_argument_information): Call
maybe_emit_free_warning.
* doc/extend.texi (attribute malloc): Update.
* doc/invoke.texi (-Wfree-nonheap-object): Expand documentation.
(-Wmismatched-new-delete): Document new option.
(-Wmismatched-dealloc): Document new option.
2020-12-03 Alexandre Oliva <oliva@adacore.com>
* tree.c (build_common_builtin_nodes): Declare
__builtin___clear_cache for all languages.
* builtins.c (maybe_emit_call_builtin___clear_cache): Accept
Pmode arguments.
2020-12-03 Sebastian Huber <sebastian.huber@embedded-brains.de>
* config/arm/t-rtems: Add "-mthumb -mcpu=cortex-r52
-mfloat-abi=hard" multilib.
2020-12-03 Uroš Bizjak <ubizjak@gmail.com>
Jakub Jelinek <jakub@redhat.com>
PR target/98086
* config/i386/i386.c (ix86_md_asm_adjustmd): Rewrite
zero-extension part to use convert_to_mode.
2020-12-03 Andreas Krebbel <krebbel@linux.ibm.com>
* config/s390/s390.md ("@probe_stack2<mode>"): Change mode
iterator to W.
2020-12-03 Richard Sandiford <richard.sandiford@arm.com>
* config/aarch64/aarch64-sve-builtins-base.cc (svundef_impl::fold):
Delete.
2020-12-03 Eric Botcazou <ebotcazou@adacore.com>
PR middle-end/98099
* expmed.c (flip_storage_order): In the case of a non-integer mode,
sorry out if the integer mode to be used instead is not supported.
2020-12-03 Eric Botcazou <ebotcazou@adacore.com>
PR middle-end/98082
* function.c (use_register_for_decl): Also return true for a result
if cfun->tail_call_marked is true.
2020-12-03 Jakub Jelinek <jakub@redhat.com>
PR libstdc++/93121
* fold-const.h (native_encode_initializer): Add mask argument
defaulted to nullptr.
(find_bitfield_repr_type): Declare.
(native_interpret_aggregate): Declare.
* fold-const.c (find_bitfield_repr_type): New function.
(native_encode_initializer): Add mask argument and support for
filling it. Handle also some bitfields without integral
DECL_BIT_FIELD_REPRESENTATIVE.
(native_interpret_aggregate): New function.
* gimple-fold.h (clear_type_padding_in_mask): Declare.
* gimple-fold.c (struct clear_padding_struct): Add clear_in_mask
member.
(clear_padding_flush): Handle buf->clear_in_mask.
(clear_padding_union): Copy clear_in_mask. Don't error if
buf->clear_in_mask is set.
(clear_padding_type): Don't error if buf->clear_in_mask is set.
(clear_type_padding_in_mask): New function.
(gimple_fold_builtin_clear_padding): Set buf.clear_in_mask to false.
* doc/extend.texi (__builtin_bit_cast): Document.
2020-12-03 Ilya Leoshkevich <iii@linux.ibm.com>
* tree-ssa-threadedge.c (record_temporary_equivalences_from_stmts_at_dest):
Do not allow __builtin_constant_p on a threading path.
2020-12-03 Ilya Leoshkevich <iii@linux.ibm.com>
* tree-ssa-strlen.c (printf_strlen_execute): Avoid division by
0.
2020-12-03 Kito Cheng <kito.cheng@sifive.com>
* config/riscv/multilib-generator (arch_canonicalize): Move
code to arch-canonicalize, and call that script to canonicalize arch
string.
(canonical_order): Move code to arch-canonicalize.
(LONG_EXT_PREFIXES): Ditto.
(IMPLIED_EXT): Ditto.
* config/riscv/arch-canonicalize: New.
* config.gcc (riscv*-*-*): Canonicalize --with-arch.
2020-12-03 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/aarch64/aarch64-option-extensions.def
(AARCH64_OPT_EXTENSION): New +flagm option in -march for AArch64.
* config/aarch64/aarch64.h (AARCH64_FL_FLAGM): Add new flagm extension bit
mask.
(AARCH64_FL_FOR_ARCH8_4): Add flagm to Armv8.4-A.
* doc/invoke.texi: Update docs with +flagm.
2020-12-03 liuhongt <hongtao.liu@intel.com>
PR target/96906
* config/i386/sse.md
(<avx512>_ucmp<mode>3<mask_scalar_merge_name>): Add a new
define_split after this insn.
2020-12-03 liuhongt <hongtao.liu@intel.com>
PR target/97642
* config/i386/i386-expand.c
(ix86_expand_special_args_builtin): Don't move all-ones mask
operands into register.
* config/i386/sse.md (UNSPEC_MASKLOAD): New unspec.
(*<avx512>_load<mode>_mask): New define_insns for masked load
instructions.
(<avx512>_load<mode>_mask): Changed to define_expands which
specifically handle memory or all-ones mask operands.
(<avx512>_blendm<mode>): Changed to define_insns which are same
as original <avx512>_load<mode>_mask with adjustment of
operands order.
(*<avx512>_load<mode>): New define_insn_and_split which is
used to optimize for masked load with all one mask.
2020-12-03 Hongyu Wang <hongyu.wang@intel.com>
PR target/97770
* config/i386/sse.md (popcount<mode>2): New expander
for SI/DI vector modes.
(popcount<mode>2): Likewise for QI/HI vector modes.
2020-12-03 Alexandre Oliva <oliva@adacore.com>
* builtins.c (default_emit_call_builtin___clear_cache): New.
(maybe_emit_call_builtin___clear_cache): New.
(expand_builtin___clear_cache): Split into the above.
(expand_builtin): Do not issue clear_cache call any more.
* builtins.h (maybe_emit_call_builtin___clear_cache): Declare.
* config/aarch64/aarch64.c (aarch64_trampoline_init): Use
maybe_emit_call_builtin___clear_cache.
* config/arc/arc.c (arc_trampoline_init): Likewise.
* config/arm/arm.c (arm_trampoline_init): Likewise.
* config/c6x/c6x.c (c6x_initialize_trampoline): Likewise.
* config/csky/csky.c (csky_trampoline_init): Likewise.
* config/m68k/linux.h (FInALIZE_TRAMPOLINE): Likewise.
* config/tilegx/tilegx.c (tilegx_trampoline_init): Likewise.
* config/tilepro/tilepro.c (tilepro_trampoline_init): Ditto.
* config/vxworks.c: Include rtl.h, memmodel.h, and optabs.h.
(vxworks_emit_call_builtin___clear_cache): New.
* config/vxworks.h (CLEAR_INSN_CACHE): Drop.
(TARGET_EMIT_CALL_BUILTIN___CLEAR_CACHE): Define.
* target.def (trampoline_init): In the documentation, refer to
maybe_emit_call_builtin___clear_cache.
(emit_call_builtin___clear_cache): New.
* doc/tm.texi.in: Add new hook point.
(CLEAR_CACHE_INSN): Remove duplicate 'both'.
* doc/tm.texi: Rebuilt.
* targhooks.h (default_meit_call_builtin___clear_cache):
Declare.
* tree.h (BUILTIN_ASM_NAME_PTR): New.
2020-12-03 Ilya Leoshkevich <iii@linux.ibm.com>
* tree-ssa-threadbackward.c (thread_jumps::profitable_jump_thread_path):
Do not allow __builtin_constant_p on a threading path.
2020-12-02 Jakub Jelinek <jakub@redhat.com>
* dwarf2out.c (add_scalar_info): Only use add_AT_wide for 128-bit
constants and only in dwarf-5 or later, where DW_FORM_data16 is
available. Otherwise use DW_FORM_block*/DW_FORM_exprloc with
DW_OP_implicit_value to describe the constant.
2020-12-02 qing zhao <qinzhao@gcc.gnu.org>
PR rtl-optimization/97777
* reg-stack.c (rest_of_handle_stack_regs): call
df_insn_rescan_all if reg_to_stack return true.
2020-12-02 Ilya Leoshkevich <iii@linux.ibm.com>
* config/s390/s390-protos.h (s390_const_int_pool_entry_p): New
function.
* config/s390/s390.c (s390_const_int_pool_entry_p): New
function.
* config/s390/s390.md: Add define_peephole2 that produces llihf
and oilf.
2020-12-02 Richard Biener <rguenther@suse.de>
PR tree-optimization/97630
* tree-vectorizer.h (_slp_tree::next_node,
_slp_tree::prev_node): New.
(vect_slp_init): Declare.
(vect_slp_fini): Likewise.
* tree-vectorizer.c (vectorize_loops): Call vect_slp_init/fini.
(pass_slp_vectorize::execute): Likewise.
* tree-vect-slp.c (vect_slp_init): New.
(vect_slp_fini): Likewise.
(slp_first_node): New global.
(_slp_tree::_slp_tree): Link node into the SLP tree list.
(_slp_tree::~_slp_tree): Delink node from the SLP tree list.
2020-12-02 Scott Snyder <sss@li-snyder.org>
PR plugins/98059
* vec.h (auto_delete_vec): Use
DISABLE_COPY_AND_ASSIGN(auto_delete_vec) instead of
DISABLE_COPY_AND_ASSIGN(auto_delete_vec<T>) to make it valid C++20
after DR2237.
2020-12-02 Martin Liska <mliska@suse.cz>
PR ipa/98075
* cgraph.c (cgraph_node::dump): Dump decl_is_malloc flag.
* ipa-pure-const.c (propagate_malloc): Do not set malloc
attribute for void functions.
2020-12-02 H.J. Lu <hjl.tools@gmail.com>
PR middle-end/93195
PR middle-end/93197
* configure.ac (HAVE_GAS_SECTION_LINK_ORDER): New. Define 1 if
the assembler supports the section flag 'o' for specifying
section with link-order.
* output.h (SECTION_LINK_ORDER): New. Defined to 0x8000000.
(SECTION_MACH_DEP): Changed from 0x8000000 to 0x10000000.
* targhooks.c (default_print_patchable_function_entry): Pass
SECTION_LINK_ORDER to switch_to_section if the section flag 'o'
works. Pass current_function_decl to switch_to_section.
* varasm.c (default_elf_asm_named_section): Use 'o' flag for
SECTION_LINK_ORDER if assembler supports it.
* config.in: Regenerated.
* configure: Likewise.
* doc/sourcebuild.texi: Document o_flag_in_section.
2020-12-02 H.J. Lu <hjl.tools@gmail.com>
* config/i386/i386.opt: Add the missing '.' for -mneeded.
2020-12-02 Richard Biener <rguenther@suse.de>
* tree-vect-loop.c (vect_transform_loop_stmt): Return whether
we vectorized a stmt.
(vect_transform_loop): Only call maybe_set_vectorized_backedge_value
when we vectorized the stmt.
2020-12-02 Jakub Jelinek <jakub@redhat.com>
* expmed.h (expand_divmod): Only declare if GCC_OPTABS_H is defined.
Add enum optabs_method argument defaulted to OPTAB_LIB_WIDEN.
* expmed.c: Include expmed.h after optabs.h.
(expand_divmod): Add methods argument, if it is not OPTAB_{,LIB_}WIDEN,
don't choose a wider mode, and pass it to other calls instead of
hardcoded OPTAB_LIB_WIDEN. Avoid emitting libcalls if not
OPTAB_LIB or OPTAB_LIB_WIDEN.
* optabs.c: Include expmed.h after optabs.h.
(expand_doubleword_mod, expand_doubleword_divmod): Pass OPTAB_DIRECT
as last argument to expand_divmod.
(expand_binop): Punt if {s,u}divmod_optab has handler for double-word
int_mode.
* expr.c: Include expmed.h after optabs.h.
* explow.c: Include expmed.h after optabs.h.
2020-12-02 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/97459
* optabs.h (expand_doubleword_divmod): Declare.
* optabs.c (expand_doubleword_divmod): New function.
(expand_binop): Use it.
* internal-fn.c (expand_DIVMOD): Likewise.
2020-12-02 Martin Liska <mliska@suse.cz>
PR c/98087
* gimple-fold.c (clear_padding_type): Do not divide by zero.
2020-12-02 Martin Liska <mliska@suse.cz>
* gdbinit.in: Write what each command calls
for a debugging function.
2020-12-02 Kewen Lin <linkw@linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Use OPTION_MASK_DIRECT_MOVE for Power8 target_enable instead
of OPTION_MASK_HTM.
* config/rs6000/rs6000-cpus.def (ISA_2_7_MASKS_SERVER):
Remove OPTION_MASK_HTM.
(RS6000_CPU): Add OPTION_MASK_HTM to power8, power9 and
powerpc64le entries.
2020-12-02 Uroš Bizjak <ubizjak@gmail.com>
PR target/98079
* config/i386/i386.md (abs<mode>2): Enable QImode
only for !TARGET_PARTIAL_REG_STALL.
(*abs<mode>2_1): Ditto.
(<maxmin:code><mode>3): Ditto.
(*<maxmin:code><mode>3_1): Ditto.
2020-12-02 Martin Liska <mliska@suse.cz>
* diagnostic.c (diagnostic_report_diagnostic): ICE causes to
terminate compiler immediately, so I guess it should be printed
always.
2020-12-02 Martin Liska <mliska@suse.cz>
PR tree-optimization/88702
* gimple-if-to-switch.cc (pass_if_to_switch::execute):
Require at least 2 BBs.
* gimple-if-to-switch.cc (find_conditions): Require
equal precision for low and high of a range.
2020-12-02 Martin Liska <mliska@suse.cz>
PR tree-optimization/98084
* gimple-if-to-switch.cc (find_conditions): Consider only
integral types.
2020-12-02 Jeff Law <law@redhat.com>
* config/h8300/addsub.md (addqi3_clobber_flags): Rename to
addqi3_flags and annotate with a <cczn> for define_subst.
(addhi3_h8sx_clobber_flags): Likewise.
(subqi3_clobber_flags, sub<mode>3_clobber_flags): Likewise.
(neg<mode2>_clobber_flags): Similarly.
(addsi3_clobber_flags): Similarly. Update last argument to
output_plussi to distinguish when we need flags or do not need
flags.
(addhi3_clobber_flags): Similarly. Twiddle code for cases
+-1, +-2 and +-4.
* config/h8300/h8300.md: Define iterators, mode attributes and
substitutions for use in compare/test elimination.
* config/h8300/jumpcall.md (branch, branch_1): Use H8cc mode
iterator to cover the different modes for the CC register.
(branch_1_false): Likewise.
2020-12-02 Maciej W. Rozycki <macro@linux-mips.org>
* loop-iv.c: Fix a typo, s/bu/by/, in the `iv_analyze_expr'
description in the introduction.
2020-12-02 H.J. Lu <hjl.tools@gmail.com>
* configure.ac (HAVE_GAS_SHF_GNU_RETAIN): New. Define 1 if
the assembler supports marking sections with SHF_GNU_RETAIN flag.
* output.h (SECTION_RETAIN): New. Defined as 0x4000000.
(SECTION_MACH_DEP): Changed from 0x4000000 to 0x8000000.
(default_unique_section): Add a bool argument.
* varasm.c (get_section): Set SECTION_RETAIN for the preserved
symbol with HAVE_GAS_SHF_GNU_RETAIN.
(resolve_unique_section): Used named section for the preserved
symbol if assembler supports SHF_GNU_RETAIN.
(get_variable_section): Handle the preserved common symbol with
HAVE_GAS_SHF_GNU_RETAIN.
(default_elf_asm_named_section): Require the full declaration and
use the 'R' flag for SECTION_RETAIN.
* config.in: Regenerated.
* configure: Likewise.
* doc/sourcebuild.texi: Document R_flag_in_section.
2020-12-02 H.J. Lu <hjl.tools@gmail.com>
* config.gcc: Replace cet.o with gnu-property.o. Replace
i386/t-cet with i386/t-gnu-property.
* config/i386/cet.c: Renamed to ...
* config/i386/gnu-property.c: This.
(emit_gnu_property): New function.
(file_end_indicate_exec_stack_and_cet): Renamed to ...
(file_end_indicate_exec_stack_and_gnu_property): This. Call
emit_gnu_property to generate GNU_PROPERTY_X86_FEATURE_1_AND and
GNU_PROPERTY_X86_ISA_1_NEEDED properties.
* config/i386/i386.opt (mneeded): New.
* config/i386/linux-common.h (file_end_indicate_exec_stack_and_cet):
Renamed to ...
(file_end_indicate_exec_stack_and_gnu_property): This.
(TARGET_ASM_FILE_END): Updated.
* config/i386/t-cet: Renamed to ...
* config/i386/t-gnu-property: This.
(cet.o): Renamed to ...
(gnu-property.o): This.
* doc/invoke.texi: Document -mneeded.
2020-12-01 Eugene Rozenfeld <Eugene.Rozenfeld@microsoft.com>
PR tree-optimization/96708
* match.pd: New pattern for comparing X with MAX (X, Y)
or MIN (X, y).
2020-12-01 Jeff Law <law@redhat.com>
* config/mcore/t-mcore (MULTILIB_EXCEPTIONS): Define.
2020-12-01 Martin Sebor <msebor@redhat.com>
PR middle-end/97595
* tree.c (component_ref_size): Fail when DECL_SIZE != TYPE_SIZE.
* tree.h (DECL_SIZE, TYPE_SIZE): Update comment.
2020-12-01 JeanHeyd Meneide <phdofthehouse@gmail.com>
* doc/cpp.texi: Document new macros.
2020-12-01 Martin Sebor <msebor@redhat.com>
PR middle-end/97373
* builtins.c (compute_objsize): Rename...
(compute_objsize_r): to this. Change order and types of arguments.
Use new argument. Adjust calls to self.
(access_ref::get_ref): New member function.
(pointer_query::pointer_query): New member function.
(pointer_query::get_ref): Same.
(pointer_query::put_ref): Same.
(handle_min_max_size): Change order and types of arguments.
(maybe_emit_free_warning): Add a test.
* builtins.h (class pointer_query): New class.
(compute_objsize): Declare an overload.
* gimple-ssa-sprintf.c (get_destination_size): Add argument.
(handle_printf_call): Change argument type.
* tree-ssa-strlen.c (adjust_last_stmt): Add an argument and use it.
(maybe_warn_overflow): Same.
(handle_builtin_strcpy): Same.
(maybe_diag_stxncpy_trunc): Same.
(handle_builtin_memcpy): Change argument type. Adjust calls.
(handle_builtin_strcat): Same.
(handle_builtin_memset): Same.
(handle_store): Same.
(strlen_check_and_optimize_call): Same.
(check_and_optimize_stmt): Same.
(strlen_dom_walker): Add new data members.
(strlen_dom_walker::before_dom_children): Use new member.
(printf_strlen_execute): Dump cache performance counters. Remove
objsize pass cleanup.
* tree-ssa-strlen.h (maybe_diag_stxncpy_trunc): Add argument.
(handle_printf_call): Change argument type.
2020-12-01 Eric Botcazou <ebotcazou@adacore.com>
* function.c (gen_call_used_regs_seq): In a function subject to the
leaf register optimization, skip registers that are not present.
* config/sparc/sparc.c (TARGET_ZERO_CALL_USED_REGS): Define to...
(sparc_zero_call_used_regs): ...this. New function.
2020-12-01 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.h: Remove unused 'X' specs in the link spec
rather than driver self-specs.
2020-12-01 Nathan Sidwell <nathan@acm.org>
* params.opt (lazy-modules): New.
* timevar.def (TV_MODULE_IMPORT, TV_MODULE_EXPORT)
(TV_MODULE_MAPPER): New.
2020-12-01 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/97459
* optabs.c (expand_doubleword_mod): Punt early for even op1.
(expand_binop): Don't require lshr_optab double-word handler.
2020-12-01 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/97954
* loop-invariant.c (find_invariant_insn): Punt on JUMP_P insns.
2020-12-01 Iain Sandoe <iain@sandoe.co.uk>
* configure.ac (check leb128 support): Check that assemblers both
accept the LEB128 directives and also give the expected output.
Add a test for uleb128 with the MSB set for a 64 bit value.
* configure: Regenerated.
2020-12-01 Iain Sandoe <iain@sandoe.co.uk>
* configure: Regnerated.
2020-12-01 Ilya Leoshkevich <iii@linux.ibm.com>
* optabs-tree.c (vec_cmp_icode_p): New function.
(vec_cmp_eq_icode_p): New function.
(expand_vec_cmp_expr_p): Use vec_cmp_icode_p and
vec_cmp_eq_icode_p.
(vcond_icode_p): Use get_rtx_code_1, just to be uniform with
vec_cmp_icode_p.
* optabs.c (unsigned_optab_p): New function.
(insn_predicate_matches_p): New function.
(can_vec_cmp_compare_p): New function.
(can_vcond_compare_p): Use unsigned_optab_p and
insn_predicate_matches_p.
(get_rtx_code): Use get_rtx_code_1.
(get_rtx_code_1): Version of get_rtx_code that returns UNKNOWN
instead of asserting.
* optabs.h (can_vec_cmp_compare_p): New function.
(get_rtx_code_1): New function.
2020-12-01 Martin Liska <mliska@suse.cz>
PR tree-optimization/14799
PR ipa/88702
* Makefile.in: Add gimple-if-to-switch.o.
* dbgcnt.def (DEBUG_COUNTER): Add new debug counter.
* passes.def: Include new pass_if_to_switch pass.
* timevar.def (TV_TREE_IF_TO_SWITCH): New timevar.
* tree-pass.h (make_pass_if_to_switch): New.
* tree-ssa-reassoc.c (struct operand_entry): Move to the header.
(dump_range_entry): Move to header file.
(debug_range_entry): Likewise.
(no_side_effect_bb): Make it global.
* tree-switch-conversion.h (simple_cluster::simple_cluster):
Add inline for couple of functions in order to prevent error
about multiple defined symbols.
* gimple-if-to-switch.cc: New file.
* tree-ssa-reassoc.h: New file.
2020-12-01 Marius Hillenbrand <mhillen@linux.ibm.com>
* configure.ac: Add configure option
--enable-s390-excess-float-precision and check to derive default
from glibc.
* config/s390/s390.c: Guard s390_excess_precision with an ifdef
for ENABLE_S390_EXCESS_FLOAT_PRECISION.
* doc/install.texi: Document --enable-s390-excess-float-precision.
* configure: Regenerate.
* config.in: Regenerate.
2020-12-01 Martin Liska <mliska@suse.cz>
PR ipa/98057
* symtab.c (symtab_node::set_section_for_node): Drop
implicit_section if x_section is NULL.
2020-12-01 Jakub Jelinek <jakub@redhat.com>
PR target/98063
* config/i386/i386-expand.c (ix86_expand_call): Handle non-plt
CM_LARGE_PIC calls.
2020-12-01 Richard Biener <rguenther@suse.de>
PR middle-end/98070
* builtins.c (builtin_fnspec): realloc is ".Cw ".
2020-12-01 Jakub Jelinek <jakub@redhat.com>
* dwarf2out.c (gen_compile_unit_die): Treat GNU C++20
like C++14 for -gdwarf-5.
2020-12-01 Jakub Jelinek <jakub@redhat.com>
PR debug/97989
* gcc.c (cpp_unique_options): Add -dD if %:debug-level-gt(2)
rather than g3|ggdb3|gstabs3|gxcoff3|gvms3.
2020-12-01 Kito Cheng <kito.cheng@sifive.com>
* config.gcc (riscv*-*-*): Drop some commited accidentally code.
2020-11-30 Jeff Law <law@redhat.com>
* symtab.c (set_section_for_node): Add function comment.
(set_section_from_node): Likewise.
2020-11-30 David Malcolm <dmalcolm@redhat.com>
* doc/plugins.texi (Plugin callbacks): Add PLUGIN_ANALYZER_INIT.
* plugin.c (register_callback): Likewise.
(invoke_plugin_callbacks_full): Likewise.
* plugin.def (PLUGIN_ANALYZER_INIT): New event.
2020-11-30 Jeff Law <law@redhat.com>
* config/h8300/bitfield.md: Remove "cc" attribute on any
insns where it remained.
* config/h8300/combiner.md: Likewise.
* config/h8300/jumpcall.md: Likewise.
* config/h8300/logical.md: Likewise.
* config/h8300/testcompare.md: Likewise.
* config/h8300/h8300.md (old_cc attr): Renamed from cc attr.
* config/h8300/h8300.c (notice_update_cc): Remove.
(compute_plussi_cc): Change references to CC_* to OLD_CC_.
(compute_logical_op_cc): Likewise.
(shift_one, shift_two): Likewise.
(compute_a_shift_cc): Likewise.
(get_shift_alg): Likewise.
(struct shift_insn): Change type of cc_valid field.
(struct shift_info): Likewise.
* config/h8300/save.md: Remove accidentially created file.
2020-11-30 Richard Sandiford <richard.sandiford@arm.com>
PR rtl-optimization/98037
* dse.c (find_shift_sequence): Iterate over all integers and
skip modes that are too small.
2020-11-30 Eugene Rozenfeld <Eugene.Rozenfeld@microsoft.com>
PR tree-optimization/96679
* match.pd (((b | c) & a) | b -> (a & c) | b): New pattern.
2020-11-30 Martin Liska <mliska@suse.cz>
* passes.c (emergency_dump_function): Dump symtab when
we are in an IPA pass.
2020-11-30 Richard Biener <rguenther@suse.de>
PR tree-optimization/98064
* tree-vect-loop.c (vectorizable_live_operation): Avoid
breaking LC SSA for BB vectorization.
2020-11-30 Jonathan Wakely <jwakely@redhat.com>
* doc/sourcebuild.texi (Directives): Fix description of
dg-require-effective-target to include "target" in selector.
2020-11-30 Richard Biener <rguenther@suse.de>
PR tree-optimization/98048
* tree-vect-generic.c (expand_vector_operations_1): Use the
correct type for the scalar LHS replacement.
2020-11-30 Martin Liska <mliska@suse.cz>
PR tree-optimization/98066
* gimple-isel.cc (gimple_expand_vec_exprs): Return when
gimple_expand_vec_exprs replaces last stmt.
2020-11-30 Ilya Leoshkevich <iii@linux.ibm.com>
* cfgrtl.c (rtl_bb_info_initialized_p): New function.
(rtl_dump_bb): Use rtl_bb_info_initialized_p before accessing bb
insns.
2020-11-30 Iain Buclaw <ibuclaw@gdcproject.org>
PR d/87818
* config.gcc (*-*-freebsd*): Add freebsd-d.o and t-freebsd.
* config/freebsd-d.c: New file.
* config/t-freebsd: New file.
2020-11-30 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/97459
* internal-fn.h (expand_addsub_overflow): Declare.
* internal-fn.c (expand_addsub_overflow): No longer static.
* optabs.c (expand_doubleword_mod): New function.
(expand_binop): Optimize double-word mod with constant divisor.
2020-11-30 Kito Cheng <kito.cheng@sifive.com>
* config.gcc (riscv*-*-*): Add TARGET_RISCV_DEFAULT_ABI and
TARGET_RISCV_DEFAULT_ARCH to tm_defines.
Remove including riscv/withmultilib.h for --with-multilib-list.
* config/riscv/riscv.h (STRINGIZING): New.
(__STRINGIZING): Ditto.
(MULTILIB_DEFAULTS): Ditto.
* config/riscv/withmultilib.h: Remove.
2020-11-30 Kito Cheng <kito.cheng@sifive.com>
* gcc.c (print_multilib_info): Check default arguments not
appeared in multi-lib option list with '!'
2020-11-30 Jeff Law <law@redhat.com>
* config/ft32/ft32.md (umulsidi3): Do not allow constants as
arguments.
2020-11-29 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (ipa_merge_modref_summary_after_inlining): Fix
handling of ignore_stores.
2020-11-29 Jan Hubicka <jh@suse.cz>
PR jit/97867
* symtab-thunks.h (thunk_info::release): Use ggc_delete.
2020-11-29 Martin Sebor <msebor@redhat.com>
PR middle-end/92936
PR middle-end/92940
PR middle-end/89428
* builtins.c (access_ref::access_ref): Initialize member.
(access_ref::phi): New function.
(access_ref::get_ref): New function.
(access_ref::add_offset): Remove duplicate assignment.
(maybe_warn_for_bound): Add "maybe" kind of warning messages.
(warn_for_access): Same.
(inform_access): Rename...
(access_ref::inform_access): ...to this. Print PHI arguments. Format
offset the same as size and simplify. Improve printing of allocation
functions and VLAs.
(check_access): Adjust to the above.
(gimple_parm_array_size): Change argument.
(handle_min_max_size): New function.
* builtins.h (class ssa_name_limit_t): Move class here from
tree-ssa-strlen.c.
(struct access_ref): Declare new members.
(gimple_parm_array_size): Change argument.
* tree-ssa-strlen.c (maybe_warn_overflow): Use access_ref and simplify.
(handle_builtin_memcpy): Correct argument passed to maybe_warn_overflow.
(handle_builtin_memset): Same.
(class ssa_name_limit_t): Move class to builtins.{h,c}.
2020-11-29 Iain Buclaw <ibuclaw@gdcproject.org>
* config.gcc (*-*-darwin*): Set d_target_objs and target_has_targetdm.
* config/elfos.h (TARGET_D_MINFO_SECTION): New macro.
(TARGET_D_MINFO_START_NAME): New macro.
(TARGET_D_MINFO_END_NAME): New macro.
* config/t-darwin: Add darwin-d.o.
* doc/tm.texi: Regenerate.
* doc/tm.texi.in (D language and ABI): Add @hook for
TARGET_D_MINFO_SECTION, TARGET_D_MINFO_START_NAME, and
TARGET_D_MINFO_END_NAME.
* config/darwin-d.c: New file.
2020-11-29 Jan Hubicka <jh@suse.cz>
* tree-ssa-structalias.c (handle_pure_call): Skip EAF_UNUSED
parameters.
2020-11-29 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (modref_lattice::merge): Do nothing if F is EAF_UNUSED.
(analyze_parms): Detect unused params.
(modref_merge_call_site_flags): Merge correct EAF_UNUSED.
2020-11-28 Eric Botcazou <ebotcazou@adacore.com>
PR target/97939
* config/sparc/predicates.md (arith_double_add_operand): Comment.
* config/sparc/sparc.md (uaddvdi4): Use arith_double_operand.
(addvdi4): Use arith_double_add_operand.
(addsi3): Remove useless attributes.
(addvsi4): Use arith_add_operand.
(*cmp_ccv_plus): Likewise and add second alternative accordingly.
(*cmp_ccxv_plus): Likewise.
(*cmp_ccv_plus_set): Likewise.
(*cmp_ccxv_plus_set): Likewise.
(*cmp_ccv_plus_sltu_set): Likewise.
(usubvdi4): Use arith_double_operand.
(subvdi4): Use arith_double_add_operand.
(subsi3): Remove useless attributes.
(subvsi4): Use arith_add_operand.
(*cmp_ccv_minus): Likewise and add second alternative accordingly.
(*cmp_ccxv_minus): Likewise.
(*cmp_ccv_minus_set): Likewise.
(*cmp_ccxv_minus_set): Likewise.
(*cmp_ccv_minus_sltu_set): Likewise.
(negsi2): Use register_operand.
(unegvsi3): Likewise.
(negvsi3) Likewise.
(*cmp_ccnz_neg): Likewise.
(*cmp_ccxnz_neg): Likewise.
(*cmp_ccnz_neg_set): Likewise.
(*cmp_ccxnz_neg_set): Likewise.
(*cmp_ccc_neg_set): Likewise.
(*cmp_ccxc_neg_set): Likewise.
(*cmp_ccc_neg_sltu_set): Likewise.
(*cmp_ccv_neg): Likewise.
(*cmp_ccxv_neg): Likewise.
(*cmp_ccv_neg_set): Likewise.
(*cmp_ccxv_neg_set): Likewise.
(*cmp_ccv_neg_sltu_set): Likewise.
2020-11-27 H.J. Lu <hjl.tools@gmail.com>
PR other/98027
* doc/install.texi: Default to --enable-cet=auto.
2020-11-27 Thomas Schwinge <thomas@codesourcery.com>
* omp-oacc-kernels-decompose.cc (flatten_binds): Don't choke on
empty GIMPLE sequence, and examine all statements contained in
inner 'GIMPLE_BIND'.
2020-11-27 Richard Biener <rguenther@suse.de>
PR tree-optimization/98024
* tree-ssa-pre.c (insert): Fix successor RPO order check.
(do_pre_regular_insertion): When inserting an assignment
in place of an all-same-value PHI still record that into
PHI_GEN.
2020-11-27 Jakub Jelinek <jakub@redhat.com>
* tree-ssanames.c (get_range_info): Handle INTEGER_CST by returning
VR_RANGE with both *min and *max set to the wide_int value of the
INTEGER_CST. Return VR_VARYING for non-SSA_NAMEs.
* match.pd ((t * 2) / 2) -> t): Handle also @0 being INTEGER_CST.
Simplify by calling get_range_info on everything.
* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Simplify by calling
get_range_info on everything.
* tree-scalar-evolution.c (iv_can_overflow_p): Likewise.
2020-11-27 Jakub Jelinek <jakub@redhat.com>
PR libstdc++/88101
* gimple-fold.c (clear_padding_type): Ignore fields with is_empty_type
types.
2020-11-27 Tobias Burnus <tobias@codesourcery.com>
PR c/97880
* omp-expand.c (expand_oacc_collapse_init, expand_oacc_collapse_vars):
Use now passed diff_type.
(expand_oacc_for): Take largest type for diff_type, taking tiling
and collapsing into account.
2020-11-27 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/aarch64/aarch64.opt
(-param=aarch64-autovec-preference): Define.
* config/aarch64/aarch64.c (aarch64_override_options_internal):
Set aarch64_sve_compare_costs to 0 when preferring only Advanced
SIMD.
(aarch64_cmp_autovec_modes): Define.
(aarch64_preferred_simd_mode): Adjust to use the above.
(aarch64_autovectorize_vector_modes): Likewise.
* doc/invoke.texi: Document aarch64-autovec-preference param.
2020-11-27 Xionghu Luo <luoxhu@linux.ibm.com>
* config/rs6000/rs6000-call.c (altivec_expand_vec_set_builtin):
Change call param 2 from type int to rtx.
* config/rs6000/rs6000-protos.h (rs6000_expand_vector_set):
Likewise.
* config/rs6000/rs6000.c (rs6000_expand_vector_init):
Change call param 2 from type int to rtx.
(rs6000_expand_vector_set): Likewise.
* config/rs6000/vector.md (vec_set<mode>): Support both constant
and variable index vec_set.
2020-11-27 Haochen Gui <guihaoc@gcc.gnu.org>
* config/rs6000/rs6000-protos.h (rs6000_output_addr_vec_elt): Declare.
* config/rs6000/rs6000.c (TARGET_ASM_GENERATE_PIC_ADDR_DIFF_VEC):
Define.
(rs6000_gen_pic_addr_diff_vec, rs6000_output_addr_vec_elt): Implement.
* config/rs6000/rs6000.h (CASE_VECTOR_PC_RELATIVE,
CASE_VECTOR_MODE, ASM_OUTPUT_ADDR_VEC_ELT): Define.
* config/rs6000/rs6000.md (tablejump<mode>_absolute,
tablejump<mode>_absolute_nospec): New expanders.
* config/rs6000/rs6000.opt (mrelative-jumptables): New.
2020-11-26 Eric Botcazou <ebotcazou@adacore.com>
PR target/96607
* config/sparc/sparc-protos.h (eligible_for_call_delay): Delete.
* config/sparc/sparc.c (eligible_for_call_delay): Likewise.
* config/sparc/sparc.md (in_call_delay): Likewise.
(tls_delay_slot): New attribute.
(define_delay [call]): Use in_branch_delay.
(tgd_call<P:mode>): Set type to call_no_delay_slot when
tls_delay_slot is false.
(tldm_call<P:mode>): Likewise.
2020-11-26 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/97997
* match.pd ((t * 2) / 2) -> t): Optimize even for defined
overflow if ranges prove there is no overflow.
2020-11-26 Richard Biener <rguenther@suse.de>
PR tree-optimization/97953
* gimple-ssa-evrp-analyze.c
(evrp_range_analyzer::record_ranges_from_incoming_edge): Make
sure the condition post-dominates the SSA definition before
recording into SSA_NAME_RANGE_INFO.
2020-11-26 Richard Biener <rguenther@suse.de>
* gimple-isel.cc (gimple_expand_vec_cond_expr): Only
lower VECTOR_BOOLEAN_TYPE_P VEC_COND_EXPRs.
2020-11-26 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/mkoffload.c (copy_early_debug_info): Don't wipe
relocation symbols.
2020-11-26 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386-expand.c (ix86_expand_multi_arg_builtin):
Remove args array of structs, declare rtx xops array instead.
Update all uses.
(ix86_expand_args_builtin): Ditto.
(ix86_expand_round_builtin): Ditto.
(ix86_expand_special_args_builtin): Ditto.
2020-11-26 Martin Liska <mliska@suse.cz>
* dwarf2out.c (gen_compile_unit_die): Fix missing == 0 in a
strcmp.
2020-11-26 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* config/sol2.h (TIME_LIBRARY): Remove.
2020-11-26 Kewen Lin <linkw@linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Set param_vect_partial_vector_usage as 1 for Power10 and up
by default.
2020-11-26 Jakub Jelinek <jakub@redhat.com>
* gimple-fold.c (clear_padding_union): Ignore DECL_PADDING_P
fields.
(clear_padding_type): Ignore DECL_PADDING_P fields, rather than
DECL_BIT_FIELD with NULL DECL_NAME.
2020-11-26 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/97979
* match.pd ((X {&,^,|} C2) << C1 into (X << C1) {&,^,|} (C2 << C1)):
Only optimize if int_const_binop returned non-NULL.
2020-11-26 liuhongt <hongtao.liu@intel.com>
* config/i386/i386-expand.c
(ix86_expand_special_args_builtin): Delete last_arg_constant
and match.
2020-11-26 Uroš Bizjak <ubizjak@gmail.com>
PR target/97873
* config/i386/i386.md (abs<mode>2): Use SDWIM mode iterator.
(*abs<mode>2_1): Use SWI mode iterator.
(<maxmin:code><mode>3): Use SDWIM mode iterator.
(*<maxmin:code><mode>3_1): Use SWI mode iterator.
2020-11-26 Jakub Jelinek <jakub@redhat.com>
PR target/96906
* config/i386/sse.md (VI12_AVX2): Remove V64QI/V32HI modes.
(VI12_AVX2_AVX512BW): New mode iterator.
(<sse2_avx2>_<plusminus_insn><mode>3<mask_name>,
uavg<mode>3_ceil, <sse2_avx2>_uavg<mode>3<mask_name>): Use
VI12_AVX2_AVX512BW iterator instead of VI12_AVX2.
(*<sse2_avx2>_<plusminus_insn><mode>3<mask_name>): Likewise.
(*<sse2_avx2>_uavg<mode>3<mask_name>): Likewise.
(*<sse2_avx2>_<plusminus_insn><mode>3<mask_name>): Add a new
define_split after this insn.
2020-11-26 Martin Uecker <muecker@gwdg.de>
PR c/65455
PR c/92935
* ginclude/stdatomic.h: Use comma operator to drop qualifiers.
2020-11-26 Vladimir Makarov <vmakarov@redhat.com>
PR bootstrap/97983
* lra.c (lra_process_new_insns): Use emit_insn_before_noloc or
emit_insn_after_noloc with the destination BB.
2020-11-25 Martin Sebor <msebor@redhat.com>
PR bootstrap/97622
PR bootstrap/94982
* config/i386/i386-options.c (ix86_valid_target_attribute_inner_p):
Avoid -Wformat-diag.
* digraph.cc (struct test_edge): Same.
* dumpfile.c (dump_loc): Same.
(dump_context::begin_scope): Same.
* edit-context.c (edited_file::print_diff): Same.
(edited_file::print_diff_hunk): Same.
* json.cc (object::print): Same.
* lto-wrapper.c (merge_and_complain): Same.
* reload.c (find_reloads): Same.
* tree-diagnostic-path.cc (print_path_summary_as_text): Same.
* ubsan.c (ubsan_type_descriptor): Same.
2020-11-25 Jan Hubicka <jh@suse.cz>
* gimple.c (gimple_call_arg_flags): Also imply EAF_NODIRECTESCAPE.
* tree-core.h (EAF_NODRECTESCAPE): New flag.
* tree-ssa-structalias.c (make_indirect_escape_constraint): New
function.
(handle_rhs_call): Hanlde EAF_NODIRECTESCAPE.
* ipa-modref.c (dump_eaf_flags): Print EAF_NODIRECTESCAPE.
(deref_flags): Dereference is always EAF_NODIRECTESCAPE.
(modref_lattice::init): Also set EAF_NODIRECTESCAPE.
(analyze_ssa_name_flags): Pure functions do not affect
EAF_NODIRECTESCAPE.
(analyze_params): Likewise.
(ipa_merge_modref_summary_after_inlining): Likewise.
(modref_merge_call_site_flags): Likewise.
2020-11-25 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (modref_summaries::duplicate,
modref_summaries_lto::duplicate): Copy arg_flags.
(remap_arg_flags): Fix remapping of arg_flags.
2020-11-25 Martin Sebor <msebor@redhat.com>
PR middle-end/97956
* gimple-fold.c (gimple_fold_builtin_memchr): Use sizetype for pointer
offsets.
2020-11-25 Matthew Malcomson <matthew.malcomson@arm.com>
* asan.c (asan_instrument_reads): New.
(asan_instrument_writes): New.
(asan_memintrin): New.
(handle_builtin_stack_restore): Account for HWASAN.
(handle_builtin_alloca): Account for HWASAN.
(get_mem_refs_of_builtin_call): Special case strlen for HWASAN.
(hwasan_instrument_reads): New.
(hwasan_instrument_writes): New.
(hwasan_memintrin): New.
(report_error_func): Assert not HWASAN.
(build_check_stmt): Make HWASAN_CHECK instead of ASAN_CHECK.
(instrument_derefs): HWASAN does not tag globals.
(instrument_builtin_call): Use new helper functions.
(maybe_instrument_call): Don't instrument `noreturn` functions.
(initialize_sanitizer_builtins): Add new type.
(asan_expand_mark_ifn): Account for HWASAN.
(asan_expand_check_ifn): Assert never called by HWASAN.
(asan_expand_poison_ifn): Account for HWASAN.
(asan_instrument): Branch based on whether using HWASAN or ASAN.
(pass_asan::gate): Return true if sanitizing HWASAN.
(pass_asan_O0::gate): Return true if sanitizing HWASAN.
(hwasan_check_func): New.
(hwasan_expand_check_ifn): New.
(hwasan_expand_mark_ifn): New.
(gate_hwasan): New.
* asan.h (hwasan_expand_check_ifn): New decl.
(hwasan_expand_mark_ifn): New decl.
(gate_hwasan): New decl.
(asan_intercepted_p): Always false for hwasan.
(asan_sanitize_use_after_scope): Account for HWASAN.
* builtin-types.def (BT_FN_PTR_CONST_PTR_UINT8): New.
* gimple-fold.c (gimple_build): New overload for building function
calls without arguments.
(gimple_build_round_up): New.
* gimple-fold.h (gimple_build): New decl.
(gimple_build): New inline function.
(gimple_build_round_up): New decl.
(gimple_build_round_up): New inline function.
* gimple-pretty-print.c (dump_gimple_call_args): Account for
HWASAN.
* gimplify.c (asan_poison_variable): Account for HWASAN.
(gimplify_function_tree): Remove requirement of
SANITIZE_ADDRESS, requiring asan or hwasan is accounted for in
`asan_sanitize_use_after_scope`.
* internal-fn.c (expand_HWASAN_CHECK): New.
(expand_HWASAN_ALLOCA_UNPOISON): New.
(expand_HWASAN_CHOOSE_TAG): New.
(expand_HWASAN_MARK): New.
(expand_HWASAN_SET_TAG): New.
* internal-fn.def (HWASAN_ALLOCA_UNPOISON): New.
(HWASAN_CHOOSE_TAG): New.
(HWASAN_CHECK): New.
(HWASAN_MARK): New.
(HWASAN_SET_TAG): New.
* sanitizer.def (BUILT_IN_HWASAN_LOAD1): New.
(BUILT_IN_HWASAN_LOAD2): New.
(BUILT_IN_HWASAN_LOAD4): New.
(BUILT_IN_HWASAN_LOAD8): New.
(BUILT_IN_HWASAN_LOAD16): New.
(BUILT_IN_HWASAN_LOADN): New.
(BUILT_IN_HWASAN_STORE1): New.
(BUILT_IN_HWASAN_STORE2): New.
(BUILT_IN_HWASAN_STORE4): New.
(BUILT_IN_HWASAN_STORE8): New.
(BUILT_IN_HWASAN_STORE16): New.
(BUILT_IN_HWASAN_STOREN): New.
(BUILT_IN_HWASAN_LOAD1_NOABORT): New.
(BUILT_IN_HWASAN_LOAD2_NOABORT): New.
(BUILT_IN_HWASAN_LOAD4_NOABORT): New.
(BUILT_IN_HWASAN_LOAD8_NOABORT): New.
(BUILT_IN_HWASAN_LOAD16_NOABORT): New.
(BUILT_IN_HWASAN_LOADN_NOABORT): New.
(BUILT_IN_HWASAN_STORE1_NOABORT): New.
(BUILT_IN_HWASAN_STORE2_NOABORT): New.
(BUILT_IN_HWASAN_STORE4_NOABORT): New.
(BUILT_IN_HWASAN_STORE8_NOABORT): New.
(BUILT_IN_HWASAN_STORE16_NOABORT): New.
(BUILT_IN_HWASAN_STOREN_NOABORT): New.
(BUILT_IN_HWASAN_TAG_MISMATCH4): New.
(BUILT_IN_HWASAN_HANDLE_LONGJMP): New.
(BUILT_IN_HWASAN_TAG_PTR): New.
* sanopt.c (sanopt_optimize_walker): Act for hwasan.
(pass_sanopt::execute): Act for hwasan.
* toplev.c (compile_file): Use `gate_hwasan` function.
2020-11-25 Matthew Malcomson <matthew.malcomson@arm.com>
* asan.c (struct hwasan_stack_var): New.
(hwasan_sanitize_p): New.
(hwasan_sanitize_stack_p): New.
(hwasan_sanitize_allocas_p): New.
(initialize_sanitizer_builtins): Define new builtins.
(ATTR_NOTHROW_LIST): New macro.
(hwasan_current_frame_tag): New.
(hwasan_frame_base): New.
(stack_vars_base_reg_p): New.
(hwasan_maybe_init_frame_base_init): New.
(hwasan_record_stack_var): New.
(hwasan_get_frame_extent): New.
(hwasan_increment_frame_tag): New.
(hwasan_record_frame_init): New.
(hwasan_emit_prologue): New.
(hwasan_emit_untag_frame): New.
(hwasan_finish_file): New.
(hwasan_truncate_to_tag_size): New.
* asan.h (hwasan_record_frame_init): New declaration.
(hwasan_record_stack_var): New declaration.
(hwasan_emit_prologue): New declaration.
(hwasan_emit_untag_frame): New declaration.
(hwasan_get_frame_extent): New declaration.
(hwasan_maybe_enit_frame_base_init): New declaration.
(hwasan_frame_base): New declaration.
(stack_vars_base_reg_p): New declaration.
(hwasan_current_frame_tag): New declaration.
(hwasan_increment_frame_tag): New declaration.
(hwasan_truncate_to_tag_size): New declaration.
(hwasan_finish_file): New declaration.
(hwasan_sanitize_p): New declaration.
(hwasan_sanitize_stack_p): New declaration.
(hwasan_sanitize_allocas_p): New declaration.
(HWASAN_TAG_SIZE): New macro.
(HWASAN_TAG_GRANULE_SIZE): New macro.
(HWASAN_STACK_BACKGROUND): New macro.
* builtin-types.def (BT_FN_VOID_PTR_UINT8_PTRMODE): New.
* builtins.def (DEF_SANITIZER_BUILTIN): Enable for HWASAN.
* cfgexpand.c (align_local_variable): When using hwasan ensure
alignment to tag granule.
(align_frame_offset): New.
(expand_one_stack_var_at): For hwasan use tag offset.
(expand_stack_vars): Record stack objects for hwasan.
(expand_one_stack_var_1): Record stack objects for hwasan.
(init_vars_expansion): Initialise hwasan state.
(expand_used_vars): Emit hwasan prologue and generate hwasan epilogue.
(pass_expand::execute): Emit hwasan base initialization if needed.
* doc/tm.texi (TARGET_MEMTAG_TAG_SIZE,TARGET_MEMTAG_GRANULE_SIZE,
TARGET_MEMTAG_INSERT_RANDOM_TAG,TARGET_MEMTAG_ADD_TAG,
TARGET_MEMTAG_SET_TAG,TARGET_MEMTAG_EXTRACT_TAG,
TARGET_MEMTAG_UNTAGGED_POINTER): Document new hooks.
* doc/tm.texi.in (TARGET_MEMTAG_TAG_SIZE,TARGET_MEMTAG_GRANULE_SIZE,
TARGET_MEMTAG_INSERT_RANDOM_TAG,TARGET_MEMTAG_ADD_TAG,
TARGET_MEMTAG_SET_TAG,TARGET_MEMTAG_EXTRACT_TAG,
TARGET_MEMTAG_UNTAGGED_POINTER): Document new hooks.
* explow.c (get_dynamic_stack_base): Take new `base` argument.
* explow.h (get_dynamic_stack_base): Take new `base` argument.
* sanitizer.def (BUILT_IN_HWASAN_INIT): New.
(BUILT_IN_HWASAN_TAG_MEM): New.
* target.def (target_memtag_tag_size,target_memtag_granule_size,
target_memtag_insert_random_tag,target_memtag_add_tag,
target_memtag_set_tag,target_memtag_extract_tag,
target_memtag_untagged_pointer): New hooks.
* targhooks.c (HWASAN_SHIFT): New.
(HWASAN_SHIFT_RTX): New.
(default_memtag_tag_size): New default hook.
(default_memtag_granule_size): New default hook.
(default_memtag_insert_random_tag): New default hook.
(default_memtag_add_tag): New default hook.
(default_memtag_set_tag): New default hook.
(default_memtag_extract_tag): New default hook.
(default_memtag_untagged_pointer): New default hook.
* targhooks.h (default_memtag_tag_size): New default hook.
(default_memtag_granule_size): New default hook.
(default_memtag_insert_random_tag): New default hook.
(default_memtag_add_tag): New default hook.
(default_memtag_set_tag): New default hook.
(default_memtag_extract_tag): New default hook.
(default_memtag_untagged_pointer): New default hook.
* toplev.c (compile_file): Call hwasan_finish_file when finished.
2020-11-25 Matthew Malcomson <matthew.malcomson@arm.com>
* common.opt (flag_sanitize_recover): Default for kernel
hwaddress.
(static-libhwasan): New cli option.
* config/aarch64/aarch64.c (aarch64_can_tag_addresses): New.
(TARGET_MEMTAG_CAN_TAG_ADDRESSES): New.
* config/gnu-user.h (LIBHWASAN_EARLY_SPEC): hwasan equivalent of
asan command line flags.
* cppbuiltin.c (define_builtin_macros_for_compilation_flags):
Add hwasan equivalent of __SANITIZE_ADDRESS__.
* doc/invoke.texi: Document hwasan command line flags.
* doc/tm.texi: Document new hook.
* doc/tm.texi.in: Document new hook.
* flag-types.h (enum sanitize_code): New sanitizer values.
* gcc.c (STATIC_LIBHWASAN_LIBS): New macro.
(LIBHWASAN_SPEC): New macro.
(LIBHWASAN_EARLY_SPEC): New macro.
(SANITIZER_EARLY_SPEC): Update to include hwasan.
(SANITIZER_SPEC): Update to include hwasan.
(sanitize_spec_function): Use hwasan options.
* opts.c (finish_options): Describe conflicts between address
sanitizers.
(find_sanitizer_argument): New.
(report_conflicting_sanitizer_options): New.
(sanitizer_opts): Introduce new sanitizer flags.
(common_handle_option): Add defaults for kernel sanitizer.
* params.opt (hwasan--instrument-stack): New
(hwasan-random-frame-tag): New
(hwasan-instrument-allocas): New
(hwasan-instrument-reads): New
(hwasan-instrument-writes): New
(hwasan-instrument-mem-intrinsics): New
* target.def (HOOK_PREFIX): Add new hook.
(can_tag_addresses): Add new hook under memtag prefix.
* targhooks.c (default_memtag_can_tag_addresses): New.
* targhooks.h (default_memtag_can_tag_addresses): New decl.
* toplev.c (process_options): Ensure hwasan only on
architectures that advertise the possibility.
2020-11-25 Matthew Malcomson <matthew.malcomson@arm.com>
* doc/install.texi: Document new option.
2020-11-25 Richard Sandiford <richard.sandiford@arm.com>
* config/aarch64/aarch64.c (aarch64_maybe_expand_sve_subreg_move):
Do not optimize LRA subregs.
* config/aarch64/aarch64-sve.md
(@aarch64_pred_<SVE_INT_UNARY:optab><mode>): Tie the input to the
output.
(@aarch64_sve_revbhw_<SVE_ALL:mode><PRED_HSD:mode>): Likewise.
(*<ANY_EXTEND:optab><SVE_PARTIAL_I:mode><SVE_HSDI:mode>2): Likewise.
(@aarch64_pred_sxt<SVE_FULL_HSDI:mode><SVE_PARTIAL_I:mode>): Likewise.
(*cnot<mode>): Likewise.
(@aarch64_pred_<SVE_COND_FP_UNARY:optab><mode>): Likewise.
(@aarch64_sve_<optab>_nontrunc<SVE_FULL_F:mode><SVE_FULL_HSDI:mode>):
Likewise.
(@aarch64_sve_<optab>_trunc<VNx2DF_ONLY:mode><VNx4SI_ONLY:mode>):
Likewise.
(@aarch64_sve_<optab>_nonextend<SVE_FULL_HSDI:mode><SVE_FULL_F:mode>):
Likewise.
(@aarch64_sve_<optab>_extend<VNx4SI_ONLY:mode><VNx2DF_ONLY:mode>):
Likewise.
(@aarch64_sve_<optab>_trunc<SVE_FULL_SDF:mode><SVE_FULL_HSF:mode>):
Likewise.
(@aarch64_sve_<optab>_trunc<VNx4SF_ONLY:mode><VNx8BF_ONLY:mode>):
Likewise.
(@aarch64_sve_<optab>_nontrunc<SVE_FULL_HSF:mode><SVE_FULL_SDF:mode>):
Likewise.
* config/aarch64/aarch64-sve2.md
(@aarch64_pred_<SVE2_COND_FP_UNARY_LONG:sve_fp_op><mode>): Likewise.
(@aarch64_pred_<SVE2_COND_FP_UNARY_NARROWB:sve_fp_op><mode>): Likewise.
(@aarch64_pred_<SVE2_U32_UNARY:sve_int_op><mode>): Likewise.
(@aarch64_pred_<SVE2_COND_INT_UNARY_FP:sve_fp_op><mode>): Likewise.
2020-11-25 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/95862
* internal-fn.c (get_min_precision): For narrowing conversion, recurse
on the operand and if the operand precision is smaller than the
current one, return that smaller precision.
(expand_mul_overflow): For s1 * u2 -> ur and s1 * s2 -> ur cases
if the sum of minimum precisions of both operands is smaller or equal
to the result precision, just perform normal multiplication and
set overflow to the sign bit of the multiplication result. For
u1 * u2 -> sr if both arguments have the MSB known zero, use
normal s1 * s2 -> sr expansion.
2020-11-25 Jan Hubicka <jh@suse.cz>
* cfg.c (free_block): New function.
(clear_edges): Rename to ....
(free_cfg): ... this one; also free BBs and vectors.
(expunge_block): Update comment.
* cfg.h (clear_edges): Rename to ...
(free_cfg): ... this one.
* cgraph.c (release_function_body): Use free_cfg.
2020-11-25 Richard Biener <rguenther@suse.de>
PR middle-end/97579
* gimple-isel.cc (gimple_expand_vec_cond_expr): Lower
VECTOR_BOOLEAN_TYPE_P, non-vector mode VEC_COND_EXPRs.
2020-11-25 Jakub Jelinek <jakub@redhat.com>
PR middle-end/97943
* gimple-fold.c (clear_padding_union, clear_padding_type): Error on and
ignore flexible array member fields. Ignore fields with
error_mark_node type.
2020-11-24 Ulrich Weigand <ulrich.weigand@de.ibm.com>
Revert:
2020-11-24 Ulrich Weigand <uweigand@de.ibm.com>
* doc/invoke.texi (-ffast-math): Remove mention of -fno-signaling-nans.
Clarify conditions when __FAST_MATH__ preprocessor macro is defined.
* opts.c (common_handle_option): Pass OPTS_SET to set_fast_math_flags
and set_unsafe_math_optimizations_flags.
(set_fast_math_flags): Add OPTS_SET argument, and use it to avoid
setting flags already explicitly set on the command line. In the !set
case, also reset x_flag_cx_limited_range and x_flag_excess_precision.
Never reset x_flag_signaling_nans or x_flag_rounding_math.
(set_unsafe_math_optimizations_flags): Add OPTS_SET argument, and use
it to avoid setting flags already explicitly set on the command line.
(fast_math_flags_set_p): Also test x_flag_cx_limited_range,
x_flag_associative_math, x_flag_reciprocal_math, and
x_flag_rounding_math.
2020-11-24 Vladimir Makarov <vmakarov@redhat.com>
PR bootstrap/97933
* lra.c (lra_process_new_insns): Stop on the first real insn after
head of e->dest.
2020-11-24 Richard Earnshaw <rearnsha@arm.com>
PR target/97534
* config/arm/arm.c (arm_split_atomic_op): Use gen_int_mode when
negating a const_int.
2020-11-24 Ilya Leoshkevich <iii@linux.ibm.com>
* config/s390/vector.md: Use vcond_comparison_operator
predicate.
2020-11-24 Ulrich Weigand <uweigand@de.ibm.com>
* doc/invoke.texi (-ffast-math): Remove mention of -fno-signaling-nans.
Clarify conditions when __FAST_MATH__ preprocessor macro is defined.
* opts.c (common_handle_option): Pass OPTS_SET to set_fast_math_flags
and set_unsafe_math_optimizations_flags.
(set_fast_math_flags): Add OPTS_SET argument, and use it to avoid
setting flags already explicitly set on the command line. In the !set
case, also reset x_flag_cx_limited_range and x_flag_excess_precision.
Never reset x_flag_signaling_nans or x_flag_rounding_math.
(set_unsafe_math_optimizations_flags): Add OPTS_SET argument, and use
it to avoid setting flags already explicitly set on the command line.
(fast_math_flags_set_p): Also test x_flag_cx_limited_range,
x_flag_associative_math, x_flag_reciprocal_math, and
x_flag_rounding_math.
2020-11-24 Jakub Jelinek <jakub@redhat.com>
PR target/97950
* config/i386/i386.md (*setcc_si_1_and): Macroize into...
(*setcc_<mode>_1_and): New define_insn_and_split with SWI24 iterator.
(*setcc_si_1_movzbl): Macroize into...
(*setcc_<mode>_1_movzbl): New define_insn_and_split with SWI24
iterator.
2020-11-24 Jakub Jelinek <jakub@redhat.com>
* gimple-fold.c (clear_padding_flush): If a word contains only 0
or 0xff bytes of padding other than all set, all clear, all set
followed by all clear or all clear followed by all set, don't emit
a RMW operation on the whole word or parts of it, but instead
clear the individual bytes of padding. For paddings of one byte
size, don't use char[1] and {}, but instead just char and 0.
2020-11-24 Thomas Schwinge <thomas@codesourcery.com>
* omp-expand.c (expand_oacc_for): More explicit checking of which
OMP constructs we're expecting.
2020-11-24 Thomas Schwinge <thomas@codesourcery.com>
* doc/install.texi (Prerequisites) <Tcl>: Add comment.
2020-11-24 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96929
* fold-const.c (wide_int_binop) <case LSHIFT_EXPR, case RSHIFT_EXPR>:
Return false on negative second argument rather than trying to handle
it as shift in the other direction.
* tree-ssa-ccp.c (bit_value_binop) <case LSHIFT_EXPR,
case RSHIFT_EXPR>: Punt on negative shift count rather than trying
to handle it as shift in the other direction.
* match.pd (-1 >> x to -1): Remove tree_expr_nonnegative_p check.
2020-11-24 Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>
PR tree-optimization/97849
* tree-if-conv.c (tree_if_conversion): Move ssa_name
replacement code from ifcvt_local_dce to this function
before calling do_rpo_vn.
2020-11-24 Martin Sebor <msebor@redhat.com>
* tree-cfg.c (dump_function_to_file): Print type attributes
and return type.
2020-11-23 Martin Jambor <mjambor@suse.cz>
* ipa-prop.h (ipa_pass_through_data): Expand comment describing
operation.
* ipa-prop.c (analyze_agg_content_value): Detect new special case and
encode it as ASSERT_EXPR.
* ipa-cp.c (values_equal_for_ipcp_p): Move before
ipa_get_jf_arith_result.
(ipa_get_jf_arith_result): Special case ASSERT_EXPR.
2020-11-23 Jeff Law <law@redhat.com>
* config/h8300/h8300.c (h8300_rtx_costs): Handle the various
comparison rtx codes too.
2020-11-23 Jan Hubicka <jh@suse.cz>
* ipa-prop.c (build_agg_jump_func_from_list,
ipa_read_jump_function): Reserve agg.items precisely.
* ipa-prop.h (ipa_node_params::~ipa_node_params): Release descriptors
(ipa_edge_args::~ipa_edge_args): Release agg.items.
2020-11-23 Jan Hubicka <jh@suse.cz>
* lto-streamer-in.c (input_cfg): Do not init ssa operands.
(input_function): Do not init tree_ssa and set in_ssa_p.
(input_ssa_names): Do it here.
* tree-ssa.c (init_tree_ssa): Add additional SIZE parameter, default
to 0
* tree-ssanames.c (init_ssanames): Do not round size up to 50, allocate
precisely.
* tree-ssa.h (init_tree_ssa): Update prototype.
2020-11-23 Nathan Sidwell <nathan@acm.org>
* diagnostic.c (diagnostic_report_current_module): Adjust for C++
module importation.
2020-11-23 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.c (msp430_section_attr): Don't warn for "lower"
attribute used with "noinit" or "persistent" attributes.
(msp430_persist_attr): Remove.
(attr_lower_exclusions): Remove ATTR_PERSIST exclusion.
(attr_upper_exclusions): Likewise.
(attr_either_exclusions): Likewise.
(attr_persist_exclusions): Remove.
(msp430_attribute_table): Remove ATTR_PERSIST handling.
(msp430_handle_generic_attribute): Remove ATTR_PERSIST section conflict
handling.
(TARGET_ASM_INIT_SECTIONS): Remove.
(msp430_init_sections): Remove.
(msp430_select_section): Use default_elf_select_section for decls with
the "persistent" attribute.
(msp430_section_type_flags): Remove ".persistent" section handling.
* doc/extend.texi (MSP430 Variable Attributes): Remove "noinit" and
"persistent" documentation.
2020-11-23 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (maybe_push_to_hybrid_worklist): Skip
debug stmts.
2020-11-23 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* doc/extend.texi (Common Variable Attributes): Document the
"persistent" variable attribute.
* doc/sourcebuild.texi (Effective-Target Keywords): Document
the "persistent" effective target keyword.
* tree.h (DECL_PERSISTENT_P): Define.
* varasm.c (bss_initializer_p): Return false for a
DECL_PERSISTENT_P decl initialized to zero.
(default_section_type_flags): Handle the ".persistent" section.
(default_elf_select_section): Likewise.
(default_unique_section): Likewise.
2020-11-23 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* tree.h (DECL_NOINIT_P): Define.
* varasm.c (DECL_NOINIT_P): Check DECL_NOINIT_P before using
unnamed bss/lcomm sections for bss_initializer variables.
(default_elf_select_section): Use DECL_NOINIT_P instead of
looking up attribute for .noinit section selection.
(default_unique_section): Check DECL_NOINIT_P for .noinit
section selection.
2020-11-23 Matthew Malcomson <matthew.malcomson@arm.com>
* doc/install.texi: Document bootstrap-asan option.
2020-11-22 Uroš Bizjak <ubizjak@gmail.com>
PR target/97873
* config/i386/i386.md (abs<mode>2): Use SWI48DWI mode iterator.
(*abs<dwi>2_doubleword): Use DWIH mode iterator.
(<maxmin:code><mode>3): Use SWI48DWI mode iterator.
(*<maxmin:code><dwi>3_doubleword): Use DWIH mode iterator.