| 2022-02-16 Andrew MacLeod <amacleod@redhat.com> |
| |
| * gimple-range-gori.cc (gori_compute::condexpr_adjust): Use |
| range_compatible_p instead of direct type comparison. |
| |
| 2022-02-16 Jakub Jelinek <jakub@redhat.com> |
| |
| PR rtl-optimization/104544 |
| * combine.cc (try_combine): When looking for insn whose links |
| should be updated from i3 to i2, don't stop on debug insns, instead |
| skip over them. |
| |
| 2022-02-16 Richard Sandiford <richard.sandiford@arm.com> |
| |
| PR target/100056 |
| * config/aarch64/iterators.md (LOGICAL_OR_PLUS): New iterator. |
| * config/aarch64/aarch64.md: Extend the PR100056 patterns |
| to handle plus in the same way as ior, if the operands have |
| no set bits in common. |
| |
| 2022-02-15 Andrew MacLeod <amacleod@redhat.com> |
| |
| PR tree-optimization/104526 |
| * gimple-range-fold.cc (fold_using_range::range_of_cond_expr): Call |
| new routine. |
| * gimple-range-gori.cc (range_def_chain::get_def_chain): Force a build |
| of dependency chain if there isn't one. |
| (gori_compute::condexpr_adjust): New. |
| * gimple-range-gori.h (class gori_compute): New prototype. |
| |
| 2022-02-15 Richard Sandiford <richard.sandiford@arm.com> |
| |
| PR target/100874 |
| * config/aarch64/aarch64-protos.h (aarch64_maxmin_plus_const): |
| Declare. |
| * config/aarch64/aarch64.cc (aarch64_maxmin_plus_const): New function. |
| * config/aarch64/aarch64.md (*aarch64_minmax_plus): New pattern. |
| |
| 2022-02-15 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * tree-vectorizer.h (vect_scalar_ops_slice): New struct. |
| (vect_scalar_ops_slice_hash): Likewise. |
| (vect_scalar_ops_slice::op): New function. |
| * tree-vect-slp.cc (vect_scalar_ops_slice::all_same_p): New function. |
| (vect_scalar_ops_slice_hash::hash): Likewise. |
| (vect_scalar_ops_slice_hash::equal): Likewise. |
| (vect_prologue_cost_for_slp): Check for duplicate vectors. |
| * config/aarch64/aarch64.cc |
| (aarch64_vector_costs::m_stp_sequence_cost): New member variable. |
| (aarch64_aligned_constant_offset_p): New function. |
| (aarch64_stp_sequence_cost): Likewise. |
| (aarch64_vector_costs::add_stmt_cost): Handle new STP heuristic. |
| (aarch64_vector_costs::finish_cost): Likewise. |
| |
| 2022-02-15 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * tree-vect-slp.cc (vect_bb_vectorization_profitable_p): Fix |
| use after free. |
| |
| 2022-02-15 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/104543 |
| * gimple-loop-jam.cc (unroll_jam_possible_p): Check outer loop exits |
| come after the inner loop. |
| |
| 2022-02-15 Jakub Jelinek <jakub@redhat.com> |
| |
| PR target/104536 |
| * config/i386/host-cygwin.cc (cygwin_gt_pch_get_address): Use |
| cannot instead of can%'t in diagnostics. Formatting fixes. |
| |
| 2022-02-15 Jakub Jelinek <jakub@redhat.com> |
| |
| PR middle-end/104522 |
| * fold-const.h (native_interpret_real): Declare. |
| * fold-const.cc (native_interpret_real): No longer static. Don't |
| perform MODE_COMPOSITE_P verification here. |
| (native_interpret_expr) <case REAL_TYPE>: But perform it here instead |
| for all modes. |
| * gimple-fold.cc (clear_padding_type): Call native_interpret_real |
| instead of native_interpret_expr. |
| * simplify-rtx.cc (simplify_immed_subreg): Perform the native_encode_rtx |
| and comparison verification for all FLOAT_MODE_P modes, not just |
| MODE_COMPOSITE_P. |
| |
| 2022-02-15 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/104519 |
| * fold-const.cc (multiple_of_p): Remove never true condition. |
| * tree-ssa-loop-niter.cc (number_of_iterations_ne): Use |
| the appropriate types for determining whether the difference |
| of final and base is a multiple of the step. |
| |
| 2022-02-15 Jakub Jelinek <jakub@redhat.com> |
| |
| PR debug/104517 |
| * omp-low.cc (task_cpyfns): New variable. |
| (delete_omp_context): Don't call finalize_task_copyfn from here. |
| (create_task_copyfn): Push task_stmt into task_cpyfns. |
| (execute_lower_omp): Call finalize_task_copyfn here on entries from |
| task_cpyfns vector and release the vector. |
| |
| 2022-02-14 Martin Sebor <msebor@redhat.com> |
| |
| PR middle-end/104355 |
| * doc/invoke.texi (-Warray-bounds): Update documentation. |
| |
| 2022-02-14 Michael Meissner <meissner@the-meissners.org> |
| |
| PR target/104253 |
| * config/rs6000/rs6000.cc (init_float128_ibm): Update the |
| conversion functions used to convert IFmode types. |
| |
| 2022-02-14 Andrew Stubbs <ams@codesourcery.com> |
| |
| * config/gcn/gcn.cc (gcn_expand_reduc_scalar): Use force_reg. |
| |
| 2022-02-14 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/104528 |
| * tree-ssa.h (find_released_ssa_name): Declare. |
| * tree-ssa.cc (find_released_ssa_name): Export. |
| * cfgloop.cc (verify_loop_structure): Look for released |
| SSA names in loops nb_iterations. |
| * tree-ssa-dse.cc (pass_dse::execute): Release number of iteration |
| estimates. |
| |
| 2022-02-14 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/104511 |
| * tree-ssa-forwprop.cc (simplify_vector_constructor): Avoid |
| touching DFP <-> FP conversions. |
| |
| 2022-02-14 Richard Biener <rguenther@suse.de> |
| |
| PR middle-end/104497 |
| * gimplify.cc (gimplify_compound_lval): Make sure the |
| base is a non-register if needed and possible. |
| |
| 2022-02-13 liuhongt <hongtao.liu@intel.com> |
| |
| PR target/103771 |
| * match.pd (cond_expr_convert_p): New match. |
| * tree-vect-patterns.cc (gimple_cond_expr_convert_p): Declare. |
| (vect_recog_cond_expr_convert_pattern): New. |
| |
| 2022-02-12 Jakub Jelinek <jakub@redhat.com> |
| |
| PR sanitizer/104449 |
| * asan.cc: Include tree-eh.h. |
| (handle_builtin_alloca): Handle the case when __builtin_alloca or |
| __builtin_alloca_with_align can throw. |
| |
| 2022-02-12 Jakub Jelinek <jakub@redhat.com> |
| |
| PR target/104502 |
| * config/i386/i386.md (cvtsd2ss splitter): If operands[1] is xmm16+ |
| and AVX512VL isn't available, move operands[1] to operands[0] first. |
| |
| 2022-02-12 Uroš Bizjak <ubizjak@gmail.com> |
| |
| PR target/79754 |
| * config/i386/i386.cc (type_natural_mode): |
| Skip decimal float vector modes. |
| |
| 2022-02-11 Iain Sandoe <iain@sandoe.co.uk> |
| Vladimir Makarov <vmakarov@redhat.com> |
| |
| PR target/104117 |
| * config/rs6000/rs6000.cc (darwin_rs6000_legitimate_lo_sum_const_p): |
| Check for UNSPEC_MACHOPIC_OFFSET wrappers on symbolic addresses when |
| emitting PIC code. |
| (legitimate_lo_sum_address_p): Likewise. |
| * lra-constraints.cc (process_address_1): Do not attempt to emit a reg |
| load from an invalid lo_sum address. |
| |
| 2022-02-11 Jakub Jelinek <jakub@redhat.com> |
| |
| PR tree-optimization/104499 |
| * match.pd ((X & Y) CMP 0 -> X CMP2 ~Y): Use view_convert instead |
| of convert. |
| |
| 2022-02-11 Jakub Jelinek <jakub@redhat.com> |
| |
| * tree.cc (build_common_builtin_nodes): Fix up formatting in |
| __builtin_clear_padding decl creation. |
| * gimplify.cc (gimple_add_padding_init_for_auto_var): Encode |
| for_auto_init in the value of 2nd BUILT_IN_CLEAR_PADDING |
| argument rather than in 3rd argument. |
| (gimplify_call_expr): Likewise. Fix up comment formatting. |
| * gimple-fold.cc (gimple_fold_builtin_clear_padding): Expect |
| 2 arguments instead of 3, take for_auto_init from the value |
| of 2nd argument. |
| |
| 2022-02-11 Vladimir N. Makarov <vmakarov@redhat.com> |
| |
| PR rtl-optimization/104400 |
| * lra-constraints.cc (process_alt_operands): Don't make union of |
| this_alternative_exclude_start_hard_regs when reg class in insn |
| alternative covers other reg classes in the same alternative. |
| |
| 2022-02-11 Jakub Jelinek <jakub@redhat.com> |
| |
| PR middle-end/104446 |
| * combine.cc (subst): Don't substitute CONST_INTs into RTX_AUTOINC |
| operands. |
| |
| 2022-02-11 Richard Biener <rguenther@suse.de> |
| |
| PR middle-end/104496 |
| * internal-fn.cc (vectorized_internal_fn_supported_p): |
| Bail out for integer mode vector types. |
| |
| 2022-02-11 Jakub Jelinek <jakub@redhat.com> |
| |
| PR rtl-optimization/104459 |
| * df-scan.cc (df_insn_change_bb): Don't call df_set_bb_dirty when |
| moving DEBUG_INSNs between bbs. |
| |
| 2022-02-11 liuhongt <hongtao.liu@intel.com> |
| |
| PR tree-optimization/104479 |
| * match.pd (uncond_op + vec_cond -> cond_op): Add single_use |
| for the dest of uncond_op. |
| |
| 2022-02-11 Tom de Vries <tdevries@suse.de> |
| |
| PR target/104456 |
| * config/nvptx/nvptx.cc (prevent_branch_around_nothing): Handle asm |
| insn. |
| |
| 2022-02-10 Qing Zhao <qing.zhao@oracle.com> |
| |
| PR middle-end/100775 |
| * function.cc (gen_call_used_regs_seq): Call |
| df_update_exit_block_uses when updating df. |
| |
| 2022-02-10 Uroš Bizjak <ubizjak@gmail.com> |
| |
| PR target/104469 |
| * config/i386/sse.md (vec_unpacks_float_lo_v4si): |
| Change operand 1 constraint to register_operand. |
| |
| 2022-02-10 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/104373 |
| * tree-ssa-sccvn.h (do_rpo_vn): New export exposing the |
| walk kind. |
| * tree-ssa-sccvn.cc (do_rpo_vn): Export, get the default |
| walk kind as argument. |
| (run_rpo_vn): Adjust. |
| (pass_fre::execute): Likewise. |
| * tree-ssa-uninit.cc (warn_uninitialized_vars): Skip |
| blocks not reachable. |
| (execute_late_warn_uninitialized): Mark all edges as |
| executable. |
| (execute_early_warn_uninitialized): Use VN to compute |
| executable edges. |
| (pass_data_early_warn_uninitialized): Enable a dump file, |
| change dump name to warn_uninit. |
| |
| 2022-02-10 Richard Biener <rguenther@suse.de> |
| |
| PR middle-end/104467 |
| * match.pd (vector extract simplification): Multiply the |
| number of CTOR elements with the number of element elements. |
| |
| 2022-02-10 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/104466 |
| * tree-ssa-alias.cc (refs_may_alias_p_2): Use rbase1/rbase2 |
| for the MR_DEPENDENCE checks as intended. |
| |
| 2022-02-10 Tom de Vries <tdevries@suse.de> |
| |
| * config/nvptx/nvptx.md (define_insn "nvptx_atomic_store<mode>"): New |
| define_insn. |
| (define_expand "atomic_store<mode>"): Use nvptx_atomic_store<mode> for |
| TARGET_SM70. |
| (define_c_enum "unspecv"): Add UNSPECV_ST. |
| |
| 2022-02-10 Tom de Vries <tdevries@suse.de> |
| |
| * config/nvptx/nvptx-protos.h (nvptx_mem_maybe_shared_p): Declare. |
| * config/nvptx/nvptx.cc (nvptx_mem_data_area): New static function. |
| (nvptx_mem_maybe_shared_p): New function. |
| * config/nvptx/nvptx.md (define_expand "atomic_store<mode>"): New |
| define_expand. |
| |
| 2022-02-10 Tom de Vries <tdevries@suse.de> |
| |
| PR target/97005 |
| * config/nvptx/nvptx.md (define_insn "sub<mode>3"): Workaround |
| driver JIT bug by using sub.s16 instead of sub.u16. |
| |
| 2022-02-10 Roger Sayle <roger@nextmovesoftware.com> |
| |
| * config/nvptx/nvptx.md (copysign<mode>3): Allow immediate |
| floating point constants as operands 1 and/or 2. |
| |
| 2022-02-10 Roger Sayle <roger@nextmovesoftware.com> |
| |
| PR target/104345 |
| * config/nvptx/nvptx.md (sel_true<mode>): Fix indentation. |
| (sel_false<mode>): Likewise. |
| (define_code_iterator eqne): New code iterator for EQ and NE. |
| (*selp<mode>_neg_<code>): New define_insn_and_split to optimize |
| the negation of a selp instruction. |
| (*selp<mode>_not_<code>): New define_insn_and_split to optimize |
| the bitwise not of a selp instruction. |
| (*setcc_int<mode>): Use set instruction for neg:SI of a selp. |
| |
| 2022-02-10 Roger Sayle <roger@nextmovesoftware.com> |
| |
| * config/nvptx/nvptx.md (any_logic): Move code iterator earlier |
| in machine description. |
| (logic): Move code attribute earlier in machine description. |
| (ilogic): New code attribute, like logic but "ior" for IOR. |
| (and<mode>3, ior<mode>3, xor<mode>3): Delete. Replace with... |
| (<ilogic><mode>3): New define_insn for HSDIM logic operations. |
| (<ilogic>bi3): New define_insn for BI mode logic operations. |
| (define_split): Lower logic operations from integer modes to |
| BI mode predicate operations. |
| |
| 2022-02-10 Roger Sayle <roger@nextmovesoftware.com> |
| |
| * config/nvptx/nvptx.md (UNSPEC_ISINF): New UNSPEC. |
| (one_cmplbi2): New define_insn for not.pred. |
| (mulditi3): New define_expand for signed widening multiply. |
| (umulditi3): New define_expand for unsigned widening multiply. |
| (smul<mode>3_highpart): New define_insn for signed highpart mult. |
| (umul<mode>3_highpart): New define_insn for unsigned highpart mult. |
| (*smulhi3_highpart_2): Renamed from smulhi3_highpart. |
| (*smulsi3_highpart_2): Renamed from smulsi3_highpart. |
| (*umulhi3_highpart_2): Renamed from umulhi3_highpart. |
| (*umulsi3_highpart_2): Renamed from umulsi3_highpart. |
| (*setcc<mode>_from_not_bi): New define_insn. |
| (*setcc_isinf<mode>): New define_insn for testp.infinite. |
| (isinf<mode>2): New define_expand. |
| |
| 2022-02-10 Roger Sayle <roger@nextmovesoftware.com> |
| |
| * config/nvptx/nvptx.md (cmp<mode>): Renamed from *cmp<mode>. |
| (setcc<mode>_from_bi): Additionally support QImode. |
| (extendbi<mode>2): Additionally support QImode. |
| (zero_extendbi<mode>2): Additionally support QImode. |
| (any_sbinary, any_ubinary, any_sunary, any_uunary): New code |
| iterators for signed and unsigned, binary and unary operations. |
| (<sbinary>qi3, <ubinary>qi3, <sunary>qi2, <uunary>qi2): New |
| expanders to perform QImode operations using SImode instructions. |
| (cstoreqi4): New define_expand. |
| (*ext_truncsi2_qi): New define_insn. |
| (*zext_truncsi2_qi): New define_insn. |
| |
| 2022-02-10 Roger Sayle <roger@nextmovesoftware.com> |
| |
| * config/nvptx/nvptx.md (*cmpf): New define_insn. |
| (cstorehf4): New define_expand. |
| (fmahf4): New define_insn. |
| (neghf2): New define_insn. |
| (abshf2): New define_insn. |
| |
| 2022-02-10 Gerald Pfeifer <gerald@pfeifer.com> |
| |
| * doc/install.texi (Specific): Change the www.bitwizard.nl |
| reference to use https. |
| |
| 2022-02-10 Marcel Vollweiler <marcel@codesourcery.com> |
| |
| * gimplify.cc (gimplify_scan_omp_clauses): Added cases for |
| OMP_CLAUSE_HAS_DEVICE_ADDR |
| and handle array sections. |
| (gimplify_adjust_omp_clauses): Added OMP_CLAUSE_HAS_DEVICE_ADDR case. |
| * omp-low.cc (scan_sharing_clauses): Handle OMP_CLAUSE_HAS_DEVICE_ADDR. |
| (lower_omp_target): Same. |
| * tree-core.h (enum omp_clause_code): Same. |
| * tree-nested.cc (convert_nonlocal_omp_clauses): Same. |
| (convert_local_omp_clauses): Same. |
| * tree-pretty-print.cc (dump_omp_clause): Same. |
| * tree.cc: Same. |
| |
| 2022-02-10 Eugene Rozenfeld <erozen@microsoft.com> |
| |
| * auto-profile.cc (afdo_indirect_call): Don't attempt to promote indirect calls |
| that will result in direct recursive calls. |
| |
| 2022-02-10 Andrew Pinski <apinski@marvell.com> |
| |
| PR target/104474 |
| * config/aarch64/aarch64.cc |
| (aarch64_sve_expand_vector_init_handle_trailing_constants): |
| Use CONST0_RTX instead of const0_rtx for the non-constant elements. |
| |
| 2022-02-09 Uroš Bizjak <ubizjak@gmail.com> |
| |
| PR target/104462 |
| * common/config/i386/i386-common.cc (OPTION_MASK_ISA2_XSAVE_UNSET): |
| Also include OPTION_MASK_ISA2_AVX2_UNSET. |
| |
| 2022-02-09 Uroš Bizjak <ubizjak@gmail.com> |
| |
| PR target/104458 |
| * config/i386/i386-expand.cc (ix86_split_idivmod): |
| Force operands[2] and operands[3] into a register.. |
| |
| 2022-02-09 Jeff Law <jeffreyalaw@gmail.com> |
| |
| PR target/97040 |
| * config/v850/v850.md (*v850_fnmasf4): Renamed from fnmasf4. |
| (*v850_fnmssf4): Renamed from fnmssf4 |
| |
| 2022-02-09 Ian Lance Taylor <iant@golang.org> |
| |
| * godump.cc (go_force_record_alignment): Really name the alignment |
| field "_" (complete 2021-12-29 change). |
| |
| 2022-02-09 Bill Schmidt <wschmidt@linux.ibm.com> |
| |
| * config/rs6000/rs6000-builtins.def (VREPLACE_UN_UV2DI): Change |
| function prototype. |
| (VREPLACE_UN_UV4SI): Likewise. |
| (VREPLACE_UN_V2DF): Likewise. |
| (VREPLACE_UN_V2DI): Likewise. |
| (VREPLACE_UN_V4SF): Likewise. |
| (VREPLACE_UN_V4SI): Likewise. |
| * config/rs6000/rs6000-overload.def (VEC_REPLACE_UN): Change all |
| function prototypes. |
| * config/rs6000/vsx.md (vreplace_un_<mode>): Remove define_expand. |
| (vreplace_un_<mode>): New define_insn. |
| |
| 2022-02-09 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/aarch64/iterators.md (VDCSIF): New mode iterator. |
| (VDBL): Handle SF. |
| (single_wx, single_type, single_dtype, dblq): New mode attributes. |
| * config/aarch64/aarch64-simd.md (load_pair_lanes<mode>): Extend |
| from VDC to VDCSIF. |
| (store_pair_lanes<mode>): Likewise. |
| (*aarch64_combine_internal<mode>): Likewise. |
| (*aarch64_combine_internal_be<mode>): Likewise. |
| (*aarch64_combinez<mode>): Likewise. |
| (*aarch64_combinez_be<mode>): Likewise. |
| * config/aarch64/aarch64.cc (aarch64_classify_address): Handle |
| 8-byte modes for ADDR_QUERY_LDP_STP_N. |
| (aarch64_print_operand): Likewise for %y. |
| |
| 2022-02-09 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/aarch64/aarch64-simd.md (@aarch64_split_simd_mov<mode>): |
| Use aarch64_combine instead of move_lo/hi_quad. Tabify. |
| (move_lo_quad_<mode>, aarch64_simd_move_hi_quad_<mode>): Delete. |
| (aarch64_simd_move_hi_quad_be_<mode>, move_hi_quad_<mode>): Delete. |
| (vec_pack_trunc_<mode>): Take general_operand elements and use |
| aarch64_combine rather than move_lo/hi_quad to combine them. |
| (vec_pack_trunc_df): Likewise. |
| |
| 2022-02-09 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/aarch64/aarch64-protos.h (aarch64_split_simd_combine): |
| Delete. |
| * config/aarch64/aarch64-simd.md (@aarch64_combinez<mode>): Rename |
| to... |
| (*aarch64_combinez<mode>): ...this. |
| (@aarch64_combinez_be<mode>): Rename to... |
| (*aarch64_combinez_be<mode>): ...this. |
| (@aarch64_vec_concat<mode>): New expander. |
| (aarch64_combine<mode>): Use it. |
| (@aarch64_simd_combine<mode>): Delete. |
| * config/aarch64/aarch64.cc (aarch64_split_simd_combine): Delete. |
| (aarch64_expand_vector_init): Use aarch64_vec_concat. |
| |
| 2022-02-09 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/aarch64/predicates.md (aarch64_reg_or_mem_pair_operand): |
| New predicate. |
| * config/aarch64/aarch64-simd.md (*aarch64_combine_internal<mode>) |
| (*aarch64_combine_internal_be<mode>): New patterns. |
| |
| 2022-02-09 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/aarch64/aarch64-simd.md (move_lo_quad_internal_<mode>) |
| (move_lo_quad_internal_be_<mode>): Delete. |
| (move_lo_quad_<mode>): Use aarch64_combine<Vhalf> instead of the above. |
| |
| 2022-02-09 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/aarch64/aarch64-protos.h (aarch64_mergeable_load_pair_p): |
| Declare. |
| * config/aarch64/aarch64-simd.md (load_pair_lanes<mode>): Use |
| aarch64_mergeable_load_pair_p instead of inline check. |
| * config/aarch64/aarch64.cc (aarch64_expand_vector_init): Likewise. |
| (aarch64_check_consecutive_mems): Allow the reversed parameter |
| to be null. |
| (aarch64_mergeable_load_pair_p): New function. |
| |
| 2022-02-09 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/aarch64/aarch64-simd.md (vec_set<mode>): Allow the |
| element to be an aarch64_simd_nonimmediate_operand. |
| |
| 2022-02-09 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/aarch64/aarch64-simd.md (aarch64_simd_vec_set<mode>): Use |
| aarch64_simd_nonimmediate_operand instead of |
| aarch64_simd_general_operand. |
| (@aarch64_combinez<mode>): Use nonimmediate_operand instead of |
| general_operand. |
| (@aarch64_combinez_be<mode>): Likewise. |
| |
| 2022-02-09 Richard Biener <rguenther@suse.de> |
| |
| PR middle-end/104464 |
| * gimple-isel.cc (gimple_expand_vec_cond_expr): Postpone |
| throwing check to after unproblematic replacement. |
| |
| 2022-02-09 Roger Sayle <roger@nextmovesoftware.com> |
| |
| PR tree-optimization/104420 |
| * match.pd (mult @0 real_zerop): Tweak conditions for constant |
| folding X*0.0 (or X*-0.0) to HONOR_SIGNED_ZEROS when appropriate. |
| |
| 2022-02-09 Jakub Jelinek <jakub@redhat.com> |
| |
| PR debug/104407 |
| * dwarf2out.cc (mangle_referenced_decls): New function. |
| (tree_add_const_value_attribute): Don't call rtl_for_decl_init if |
| early_dwarf. Instead walk the initializer and try to mangle vars or |
| functions referenced from it. |
| |
| 2022-02-09 Andrew MacLeod <amacleod@redhat.com> |
| |
| PR tree-optimization/104288 |
| * gimple-range-cache.cc (non_null_ref::set_nonnull): New. |
| (non_null_ref::adjust_range): Move to header. |
| (ranger_cache::range_of_def): Don't check non-null. |
| (ranger_cache::entry_range): Don't check non-null. |
| (ranger_cache::range_on_edge): Check for nonnull on normal edges. |
| (ranger_cache::update_to_nonnull): New. |
| (non_null_loadstore): New. |
| (ranger_cache::block_apply_nonnull): New. |
| * gimple-range-cache.h (class non_null_ref): Update prototypes. |
| (non_null_ref::adjust_range): Move to here and inline. |
| (class ranger_cache): Update prototypes. |
| * gimple-range-path.cc (path_range_query::range_defined_in_block): Do |
| not search dominators. |
| (path_range_query::adjust_for_non_null_uses): Ditto. |
| * gimple-range.cc (gimple_ranger::range_of_expr): Check on-entry for |
| def overrides. Do not check nonnull. |
| (gimple_ranger::range_on_entry): Check dominators for nonnull. |
| (gimple_ranger::range_on_edge): Check for nonnull on normal edges.. |
| (gimple_ranger::register_side_effects): New. |
| * gimple-range.h (gimple_ranger::register_side_effects): New. |
| * tree-vrp.cc (rvrp_folder::fold_stmt): Call register_side_effects. |
| |
| 2022-02-09 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/104445 |
| PR tree-optimization/102832 |
| * optabs-query.h (can_vec_extract): New. |
| * optabs-query.cc (can_vec_extract): Likewise. |
| * tree-vect-loop.cc (vect_find_reusable_accumulator): Check |
| we can extract a hi/lo part from the larger vector, rework |
| check iteration from larger to smaller sizes. |
| |
| 2022-02-09 H.J. Lu <hjl.tools@gmail.com> |
| |
| PR target/35513 |
| PR target/100593 |
| * config/i386/gnu-property.cc: Include "i386-protos.h". |
| (file_end_indicate_exec_stack_and_gnu_property): Generate |
| a GNU_PROPERTY_1_NEEDED note for -mno-direct-extern-access or |
| nodirect_extern_access attribute. |
| * config/i386/i386-options.cc |
| (handle_nodirect_extern_access_attribute): New function. |
| (ix86_attribute_table): Add nodirect_extern_access attribute. |
| * config/i386/i386-protos.h (ix86_force_load_from_GOT_p): Add a |
| bool argument. |
| (ix86_has_no_direct_extern_access): New. |
| * config/i386/i386.cc (ix86_has_no_direct_extern_access): New. |
| (ix86_force_load_from_GOT_p): Add a bool argument to indicate |
| call operand. Force non-call load from GOT for |
| -mno-direct-extern-access or nodirect_extern_access attribute. |
| (legitimate_pic_address_disp_p): Avoid copy relocation in PIE |
| for -mno-direct-extern-access or nodirect_extern_access attribute. |
| (ix86_print_operand): Pass true to ix86_force_load_from_GOT_p |
| for call operand. |
| (asm_preferred_eh_data_format): Use PC-relative format for |
| -mno-direct-extern-access to avoid copy relocation. Check |
| ptr_mode instead of TARGET_64BIT when selecting DW_EH_PE_sdata4. |
| (ix86_binds_local_p): Set ix86_has_no_direct_extern_access to |
| true for -mno-direct-extern-access or nodirect_extern_access |
| attribute. Don't treat protected data as extern and avoid copy |
| relocation on common symbol with -mno-direct-extern-access or |
| nodirect_extern_access attribute. |
| (ix86_reloc_rw_mask): New to avoid copy relocation for |
| -mno-direct-extern-access. |
| (TARGET_ASM_RELOC_RW_MASK): New. |
| * config/i386/i386.opt: Add -mdirect-extern-access. |
| * doc/extend.texi: Document nodirect_extern_access attribute. |
| * doc/invoke.texi: Document -m[no-]direct-extern-access. |
| |
| 2022-02-09 H.J. Lu <hjl.tools@gmail.com> |
| |
| PR target/104441 |
| * config/i386/i386.cc (ix86_avx_u128_mode_source): New function. |
| (ix86_avx_u128_mode_needed): Return AVX_U128_ANY for debug INSN. |
| Call ix86_avx_u128_mode_source to check mode for each component |
| of source operand. |
| |
| 2022-02-09 liuhongt <hongtao.liu@intel.com> |
| |
| PR target/104451 |
| * config/i386/sse.md (<insn><mode>3): lowpart_subreg |
| operands[2] from SImode to QImode. |
| |
| 2022-02-09 Richard Biener <rguenther@suse.de> |
| |
| PR middle-end/104450 |
| * gimple-isel.cc: Pass cfun around. |
| (+gimple_expand_vec_cond_expr): Do not combine a throwing |
| comparison with the select. |
| |
| 2022-02-09 Richard Biener <rguenther@suse.de> |
| |
| PR target/104453 |
| * config/i386/i386.cc (ix86_gimple_fold_builtin): Guard shift |
| folding for NULL LHS. |
| |
| 2022-02-08 Robin Dapp <rdapp@linux.ibm.com> |
| |
| PR rtl-optimization/104198 |
| PR rtl-optimization/104153 |
| * ifcvt.cc (noce_convert_multiple_sets_1): Copy rtx instead of |
| using it directly. Rework comparison handling and always |
| perform a second pass. |
| |
| 2022-02-08 Jakub Jelinek <jakub@redhat.com> |
| |
| PR target/102140 |
| * config/rs6000/rs6000.cc (vspltis_shifted): Return false also if |
| split1 pass has finished already. |
| |
| 2022-02-08 Bill Schmidt <wschmidt@linux.ibm.com> |
| |
| * config/rs6000/rs6000-builtins.def (VMSUMCUD): New. |
| * config/rs6000/rs6000-overload.def (VEC_MSUMC): New. |
| * config/rs6000/vsx.md (UNSPEC_VMSUMCUD): New constant. |
| (vmsumcud): New define_insn. |
| |
| 2022-02-08 Tom de Vries <tdevries@suse.de> |
| |
| * config/nvptx/nvptx-opts.h (enum ptx_isa): Add PTX_ISA_SM70. |
| * config/nvptx/nvptx.h (TARGET_SM70): Define. |
| |
| 2022-02-08 Robin Dapp <rdapp@linux.ibm.com> |
| |
| * config/s390/s390.cc (s390_rtx_costs): Increase costs for load |
| on condition. |
| * config/s390/s390.md: Use paradoxical subreg. |
| |
| 2022-02-08 Robin Dapp <rdapp@linux.ibm.com> |
| |
| * combine.cc (reg_subword_p): Check for paradoxical subreg. |
| |
| 2022-02-08 Tom de Vries <tdevries@suse.de> |
| |
| PR target/104283 |
| * config/nvptx/nvptx-opts.h (enum ptx_version): Add PTX_VERSION_3_0 |
| and PTX_VERSION_4_2. |
| * config/nvptx/nvptx.cc (first_ptx_version_supporting_sm) |
| (default_ptx_version_option, ptx_version_to_string) |
| (sm_version_to_string, handle_ptx_version_option): New function. |
| (nvptx_option_override): Call handle_ptx_version_option. |
| (nvptx_file_start): Use ptx_version_to_string and sm_version_to_string. |
| * config/nvptx/nvptx.md (define_insn "nvptx_shuffle<mode>") |
| (define_insn "nvptx_vote_ballot"): Use TARGET_PTX_6_0. |
| * config/nvptx/nvptx.opt (mptx): Remove 'Init'. |
| |
| 2022-02-08 Maciej W. Rozycki <macro@embecosm.com> |
| |
| * doc/install.texi (Configuration): Document `--with-isa-spec=' |
| RISC-V option. |
| * doc/invoke.texi (Option Summary): List `-misa-spec=' RISC-V |
| option. |
| (RISC-V Options): Document it. |
| |
| 2022-02-08 Maciej W. Rozycki <macro@embecosm.com> |
| |
| * config/riscv/t-riscv (riscv-sr.o): Add $(TM_H) dependency. |
| |
| 2022-02-08 Tom de Vries <tdevries@suse.de> |
| |
| * config/nvptx/nvptx.cc (write_fn_proto_1): Handle 'main (int)'. |
| |
| 2022-02-08 Tom de Vries <tdevries@suse.de> |
| |
| PR target/104364 |
| * config/nvptx/nvptx-protos.h (nvptx_mem_local_p): Declare. |
| * config/nvptx/nvptx.cc (nvptx_reorg_uniform_simt): Assert that |
| change is validated. |
| (nvptx_mem_local_p): New function. |
| * config/nvptx/nvptx.md: Use nvptx_mem_local_p. |
| (define_c_enum "unspecv"): Add UNSPECV_CAS_LOCAL. |
| (define_insn "atomic_compare_and_swap<mode>_1_local"): New |
| non-atomic, non-predicable define_insn, factored out of ... |
| (define_insn "atomic_compare_and_swap<mode>_1"): ... here. |
| Make predicable again. |
| (define_expand "atomic_compare_and_swap<mode>"): Use |
| atomic_compare_and_swap<mode>_1_local. |
| |
| 2022-02-08 liuhongt <hongtao.liu@intel.com> |
| |
| PR rtl-optimization/104059 |
| * regcprop.cc (copyprop_hardreg_forward_1): Don't propagate |
| for a more expensive reg-reg move. |
| |
| 2022-02-07 Tamar Christina <tamar.christina@arm.com> |
| |
| * config/arm/arm_neon.h (vusdotq_s32, vusdot_laneq_s32, |
| vusdotq_laneq_s32, vsudot_laneq_s32, vsudotq_laneq_s32): New |
| * config/arm/arm_neon_builtins.def (usdot): Add V16QI. |
| (usdot_laneq, sudot_laneq): New. |
| * config/arm/neon.md (neon_<sup>dot_laneq<vsi2qi>): New. |
| (neon_<sup>dot_lane<vsi2qi>): Remote unneeded code. |
| |
| 2022-02-07 Tamar Christina <tamar.christina@arm.com> |
| |
| * config/arm/arm_neon.h (vdot_laneq_u32, vdotq_laneq_u32, |
| vdot_laneq_s32, vdotq_laneq_s32): New. |
| * config/arm/arm_neon_builtins.def (sdot_laneq, udot_laneq): New. |
| * config/arm/neon.md (neon_<sup>dot<vsi2qi>): New. |
| (<sup>dot_prod<vsi2qi>): Re-order rtl. |
| (neon_<sup>dot_lane<vsi2qi>): Fix rtl order and endiannes. |
| (neon_<sup>dot_laneq<vsi2qi>): New. |
| |
| 2022-02-07 Andreas Krebbel <krebbel@linux.ibm.com> |
| |
| PR target/104327 |
| * config/s390/s390.cc (s390_can_inline_p): Accept a few more flags |
| if always_inline is set. Don't inline when tune differs without |
| always_inline. |
| |
| 2022-02-07 Richard Biener <rguenther@suse.de> |
| |
| PR middle-end/104402 |
| * gimple-expr.cc (is_gimple_condexpr): _Complex typed |
| compares are not valid. |
| * tree-cfg.cc (verify_gimple_assign_ternary): For COND_EXPR |
| check is_gimple_condexpr. |
| |
| 2022-02-07 Kewen Lin <linkw@linux.ibm.com> |
| |
| PR target/103627 |
| * config/rs6000/rs6000.cc (rs6000_option_override_internal): Move the |
| hunk affecting VSX and ALTIVEC to appropriate place. |
| |
| 2022-02-07 Kewen Lin <linkw@linux.ibm.com> |
| |
| PR target/103627 |
| * config/rs6000/rs6000.cc (rs6000_option_override_internal): Disable |
| MMA if !TARGET_VSX. |
| |
| 2022-02-06 Jakub Jelinek <jakub@redhat.com> |
| |
| PR c++/89074 |
| PR c++/104033 |
| * fold-const.h (folding_initializer): Adjust comment. |
| (folding_cxx_constexpr): Declare. |
| * fold-const.cc (folding_initializer): Adjust comment. |
| (folding_cxx_constexpr): New variable. |
| (address_compare): Restrict the decl vs. STRING_CST |
| or vice versa or STRING_CST vs. STRING_CST or |
| is_global_var != is_global_var optimizations to !folding_cxx_constexpr. |
| Punt for FUNCTION_DECLs with non-zero offsets. If folding_initializer, |
| assume non-aliased functions have non-zero size and have different |
| addresses. For folding_cxx_constexpr, punt on comparisons of start |
| of some object and end of another one, regardless whether it is a decl |
| or string literal. Also punt for folding_cxx_constexpr on |
| STRING_CST vs. STRING_CST comparisons if the two literals could be |
| overlapping. |
| |
| 2022-02-05 Jakub Jelinek <jakub@redhat.com> |
| |
| PR tree-optimization/104389 |
| * match.pd (x * 0 -> 0): Punt if x maybe infinite and NaNs are |
| honored. |
| |
| 2022-02-05 Kito Cheng <kito.cheng@sifive.com> |
| |
| * configure.ac: Fix detection for zifencei support. |
| * configure: Regenerate. |
| |
| 2022-02-05 Kito Cheng <kito.cheng@sifive.com> |
| |
| PR target/104219 |
| * config.gcc (riscv*-*-*): Normalize the with_isa_spec value. |
| (all_defaults): Add isa_spec. |
| * config/riscv/riscv.h (OPTION_DEFAULT_SPECS): Add isa_spec. |
| |
| 2022-02-04 Bill Schmidt <wschmidt@linux.ibm.com> |
| |
| * config/rs6000/rs6000-c.cc (resolve_vec_mul): Accept args and types |
| parameters instead of arglist and nargs. Simplify accordingly. Remove |
| unnecessary test for argument count mismatch. |
| (resolve_vec_cmpne): Likewise. |
| (resolve_vec_adde_sube): Likewise. |
| (resolve_vec_addec_subec): Likewise. |
| (altivec_resolve_overloaded_builtin): Move overload special handling |
| after the gathering of arguments into args[] and types[] and the test |
| for correct number of arguments. Don't perform the test for correct |
| number of arguments for certain special cases. Call the other special |
| cases with args and types instead of arglist and nargs. |
| |
| 2022-02-04 Bill Schmidt <wschmidt@linux.ibm.com> |
| |
| PR target/100808 |
| * doc/extend.texi (Basic PowerPC Built-in Functions Available on ISA |
| 3.1): Provide consistent type names. Remove unnecessary semicolons. |
| Fix bad line breaks. |
| |
| 2022-02-04 Jakub Jelinek <jakub@redhat.com> |
| |
| PR target/104380 |
| * config/rs6000/rs6000.cc (rs6000_mangle_decl_assembler_name): Also |
| adjust mangling of __builtin*printf_chk. |
| |
| 2022-02-04 Jonathan Wakely <jwakely@redhat.com> |
| |
| * doc/cpp.texi (Variadic Macros): Replace C++2a with C++20. |
| |
| 2022-02-04 Richard Biener <rguenther@suse.de> |
| Bin Cheng <bin.cheng@linux.alibaba.com> |
| |
| PR tree-optimization/100499 |
| * fold-const.h (multiple_of_p): Add nowrap parameter, defaulted |
| to true. |
| * fold-const.cc (multiple_of_p): Likewise. Honor it for |
| MULT_EXPR, PLUS_EXPR and MINUS_EXPR and pass it along, |
| switching to false for conversions. |
| * tree-ssa-loop-niter.cc (number_of_iterations_ne): Do not |
| claim the outermost expression does not wrap when calling |
| multiple_of_p. Refactor the check done to check the |
| original IV, avoiding a bias that might wrap. |
| |
| 2022-02-04 Richard Biener <rguenther@suse.de> |
| |
| * fold-const.cc (multiple_of_p): Re-write and move LSHIFT_EXPR |
| handling. |
| |
| 2022-02-04 Eric Botcazou <ebotcazou@adacore.com> |
| |
| PR debug/104366 |
| * dwarf2out.cc (dwarf2out_finish): Empty base_types. |
| (dwarf2out_early_finish): Likewise. |
| |
| 2022-02-04 Eric Botcazou <ebotcazou@adacore.com> |
| |
| PR tree-optimization/104356 |
| * match.pd (X / bool_range_Y is X): Add guard. |
| (X / X is one): Likewise. |
| (X / abs (X) is X < 0 ? -1 : 1): Likewise. |
| (X / -X is -1): Likewise. |
| (1 / X -> X == 1): Likewise. |
| |
| 2022-02-04 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/103641 |
| * tree-vect-patterns.cc (vect_synth_mult_by_constant): |
| Pass the vector mode to choose_mult_variant. |
| |
| 2022-02-04 Roger Sayle <roger@nextmovesoftware.com> |
| |
| PR rtl-optimization/101885 |
| * combine.cc (try_combine): When splitting a parallel into two |
| sequential sets, check not only that the first doesn't clobber |
| the second but also that the second doesn't clobber the first. |
| |
| 2022-02-04 Richard Biener <rguenther@suse.de> |
| |
| PR middle-end/90348 |
| PR middle-end/104092 |
| * tree-core.h (clobber_kind): New enum. |
| (tree_base::u::bits::address_space): Document use in CONSTRUCTORs. |
| * tree.h (CLOBBER_KIND): Add. |
| (build_clobber): Add clobber kind argument, defaulted to |
| CLOBBER_UNDEF. |
| * tree.cc (build_clobber): Likewise. |
| * gimple.h (gimple_clobber_p): New overload with specified kind. |
| * tree-streamer-in.cc (streamer_read_tree_bitfields): Stream |
| CLOBBER_KIND. |
| * tree-streamer-out.cc (streamer_write_tree_bitfields): |
| Likewise. |
| * tree-pretty-print.cc (dump_generic_node): Mark EOL CLOBBERs. |
| * gimplify.cc (gimplify_bind_expr): Build storage end-of-life clobbers |
| with CLOBBER_EOL. |
| (gimplify_target_expr): Likewise. |
| * tree-inline.cc (expand_call_inline): Likewise. |
| * tree-ssa-ccp.cc (insert_clobber_before_stack_restore): Likewise. |
| * gimple-ssa-warn-access.cc (pass_waccess::check_stmt): Only treat |
| CLOBBER_EOL clobbers as ending lifetime of storage. |
| |
| 2022-02-04 Martin Sebor <msebor@redhat.com> |
| |
| * pointer-query.h (pointer_query::cache_type): Use auto_vec for auto |
| cleanup. |
| |
| 2022-02-03 Martin Sebor <msebor@redhat.com> |
| |
| PR middle-end/104260 |
| * passes.def (pass_warn_access): Adjust pass placement. |
| |
| 2022-02-03 Uroš Bizjak <ubizjak@gmail.com> |
| |
| PR target/104362 |
| * config/i386/i386.cc (find_drap_reg): For 32bit targets |
| return DI_REG if function uses __builtin_eh_return. |
| |
| 2022-02-03 Martin Sebor <msebor@redhat.com> |
| |
| * gimple-ssa-warn-restrict.cc (class pass_wrestrict): Outline ctor. |
| (pass_wrestrict::m_ptr_qry): New member. |
| (wrestrict_walk): Rename... |
| (pass_wrestrict::check_block): ...to this. |
| (pass_wrestrict::execute): Set up and tear down pointer_query and |
| ranger. |
| (builtin_memref::builtin_memref): Change ctor argument. Simplify. |
| (builtin_access::builtin_access): Same. |
| (builtin_access::m_ptr_qry): New member. |
| (check_call): Rename... |
| (pass_wrestrict::check_call): ...to this. |
| (check_bounds_or_overlap): Change argument. |
| * gimple-ssa-warn-restrict.h (check_bounds_or_overlap): Same. |
| |
| 2022-02-03 Martin Sebor <msebor@redhat.com> |
| |
| * gimple-array-bounds.cc (array_bounds_checker::array_bounds_checker): |
| Define ctor. |
| (array_bounds_checker::get_value_range): Use new member. |
| (array_bounds_checker::check_mem_ref): Same. |
| * gimple-array-bounds.h (array_bounds_checker::array_bounds_checker): |
| Outline ctor. |
| (array_bounds_checker::m_ptr_query): New member. |
| |
| 2022-02-03 Martin Sebor <msebor@redhat.com> |
| |
| * gimple-ssa-warn-access.cc (pass_waccess::pass_waccess): Remove |
| pointer_query cache. |
| * pointer-query.cc (pointer_query::pointer_query): Remove cache |
| argument. Zero-initialize new cache member. |
| (pointer_query::get_ref): Replace cache pointer with direct access. |
| (pointer_query::put_ref): Same. |
| (pointer_query::flush_cache): Same. |
| (pointer_query::dump): Same. |
| * pointer-query.h (class pointer_query): Remove cache argument from |
| ctor. Change cache pointer to cache subobject member. |
| * tree-ssa-strlen.cc: Remove pointer_query cache. |
| |
| 2022-02-03 Martin Sebor <msebor@redhat.com> |
| |
| PR tree-optimization/104119 |
| * gimple-ssa-sprintf.cc (struct directive): Change argument type. |
| (format_none): Same. |
| (format_percent): Same. |
| (format_integer): Same. |
| (format_floating): Same. |
| (get_string_length): Same. |
| (format_character): Same. |
| (format_string): Same. |
| (format_plain): Same. |
| (format_directive): Same. |
| (compute_format_length): Same. |
| (handle_printf_call): Same. |
| * tree-ssa-strlen.cc (get_range_strlen_dynamic): Same. Call |
| get_maxbound. |
| (get_range_strlen_phi): Same. |
| (get_maxbound): New function. |
| (strlen_pass::get_len_or_size): Adjust to parameter change. |
| * tree-ssa-strlen.h (get_range_strlen_dynamic): Change argument type. |
| |
| 2022-02-03 Bill Schmidt <wschmidt@linux.ibm.com> |
| |
| PR target/103686 |
| * config/rs6000/rs6000-builtin.cc (rs6000_gimple_fold_builtin): Remove |
| test for !rs6000_fold_gimple. |
| * config/rs6000/rs6000.cc (rs6000_option_override_internal): Likewise. |
| * config/rs6000/rs6000.opt (mfold-gimple): Remove. |
| |
| 2022-02-03 Bill Schmidt <wschmidt@linux.ibm.com> |
| |
| PR target/95082 |
| * config/rs6000/rs6000-builtin.cc (rs6000_expand_builtin): Handle |
| endianness for vclzlsbb and vctzlsbb. |
| * config/rs6000/rs6000-builtins.def (VCLZLSBB_V16QI): Change |
| default pattern and indicate a different pattern will be used for |
| big endian. |
| (VCLZLSBB_V4SI): Likewise. |
| (VCLZLSBB_V8HI): Likewise. |
| (VCTZLSBB_V16QI): Likewise. |
| (VCTZLSBB_V4SI): Likewise. |
| (VCTZLSBB_V8HI): Likewise. |
| |
| 2022-02-03 Bill Schmidt <wschmidt@linux.ibm.com> |
| |
| * config.gcc (powerpc*-*-*): Add rs6000-builtin.o to extra_objs. |
| * config/rs6000/rs6000-builtin.cc: New file, containing code moved |
| from other files. |
| * config/rs6000/rs6000-call.cc (cpu_is_info): Move to |
| rs6000-builtin.cc. |
| (cpu_supports_info): Likewise. |
| (rs6000_type_string): Likewise. |
| (altivec_expand_predicate_builtin): Likewise. |
| (rs6000_htm_spr_icode): Likewise. |
| (altivec_expand_vec_init_builtin): Likewise. |
| (get_element_number): Likewise. |
| (altivec_expand_vec_set_builtin): Likewise. |
| (altivec_expand_vec_ext_builtin): Likewise. |
| (rs6000_invalid_builtin): Likewise. |
| (rs6000_fold_builtin): Likewise. |
| (fold_build_vec_cmp): Likewise. |
| (fold_compare_helper): Likewise. |
| (map_to_integral_tree_type): Likewise. |
| (fold_mergehl_helper): Likewise. |
| (fold_mergeeo_helper): Likewise. |
| (rs6000_builtin_valid_without_lhs): Likewise. |
| (rs6000_builtin_is_supported): Likewise. |
| (rs6000_gimple_fold_mma_builtin): Likewise. |
| (rs6000_gimple_fold_builtin): Likewise. |
| (rs6000_expand_ldst_mask): Likewise. |
| (cpu_expand_builtin): Likewise. |
| (elemrev_icode): Likewise. |
| (ldv_expand_builtin): Likewise. |
| (lxvrse_expand_builtin): Likewise. |
| (lxvrze_expand_builtin): Likewise. |
| (stv_expand_builtin): Likewise. |
| (mma_expand_builtin): Likewise. |
| (htm_spr_num): Likewise. |
| (htm_expand_builtin): Likewise. |
| (rs6000_expand_builtin): Likewise. |
| (rs6000_vector_type): Likewise. |
| (rs6000_init_builtins): Likewise. Remove initialization of |
| builtin_mode_to_type entries. |
| (rs6000_builtin_decl): Move to rs6000-builtin.cc. |
| * config/rs6000/rs6000.cc (rs6000_builtin_mask_for_load): New |
| external declaration. |
| (rs6000_builtin_md_vectorized_function): Likewise. |
| (rs6000_builtin_reciprocal): Likewise. |
| (altivec_builtin_mask_for_load): Move to rs6000-builtin.cc. |
| (rs6000_builtin_types): Likewise. |
| (builtin_mode_to_type): Remove. |
| (rs6000_builtin_mask_for_load): Move to rs6000-builtin.cc. Remove |
| static qualifier. |
| (rs6000_builtin_md_vectorized_function): Likewise. |
| (rs6000_builtin_reciprocal): Likewise. |
| * config/rs6000/rs6000.h (builtin_mode_to_type): Remove. |
| * config/rs6000/t-rs6000 (rs6000-builtin.o): New target. |
| |
| 2022-02-03 Richard Biener <rguenther@suse.de> |
| |
| PR debug/104337 |
| * tree-nrv.cc (pass_nrv::execute): Remove tieing result and found |
| together via DECL_ABSTRACT_ORIGIN. |
| |
| 2022-02-03 Bill Schmidt <wschmidt@linux.ibm.com> |
| |
| * config/rs6000/rs6000-call.cc (rs6000_expand_builtin): Revise error |
| message for RES_BITS case. |
| |
| 2022-02-03 Aldy Hernandez <aldyh@redhat.com> |
| |
| * gimple-range-fold.cc (fur_list::fur_list): Set m_local[1] correctly. |
| |
| 2022-02-03 Jakub Jelinek <jakub@redhat.com> |
| |
| * config/arm/arm.opt (mfix-cortex-a57-aes-1742098, |
| mfix-cortex-a72-aes-1655431): Ensure description ends with full stop. |
| |
| 2022-02-03 Aldy Hernandez <aldyh@redhat.com> |
| |
| * cfganal.cc (verify_marked_backedges): New. |
| * cfganal.h (verify_marked_backedges): New. |
| * gimple-range-path.cc (path_range_query::path_range_query): |
| Verify freshness of back edges. |
| * tree-ssa-loop-ch.cc (ch_base::copy_headers): Call |
| mark_dfs_back_edges. |
| * tree-ssa-threadbackward.cc (back_threader::back_threader): Move |
| path_range_query construction after backedges have been |
| updated. |
| |
| 2022-02-03 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/aarch64/aarch64-simd.md (movmisalign<mode>): Extend from |
| VALL to VALL_F16. |
| |
| 2022-02-03 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/aarch64/iterators.md (VALL_F16MOV): Delete. |
| * config/aarch64/aarch64-simd.md (mov<mode>): Use VALL_F16 instead |
| of VALL_F16MOV. |
| |
| 2022-02-03 Martin Liska <mliska@suse.cz> |
| |
| * config/i386/i386-options.cc (ix86_valid_target_attribute_inner_p): |
| Change subject and object in the error message. |
| * config/s390/s390.cc (s390_valid_target_attribute_inner_p): |
| Likewise. |
| |
| 2022-02-03 Martin Liska <mliska@suse.cz> |
| |
| * config/s390/s390.cc (s390_valid_target_attribute_inner_p): |
| Use the error message for i386 target. |
| |
| 2022-02-03 Jakub Jelinek <jakub@redhat.com> |
| |
| PR tree-optimization/104334 |
| * range-op.cc (range_operator::wi_fold_in_parts): Change lh_range |
| and rh_range type to widest_int and subtract in widest_int. Remove |
| ov_rh, ov_lh and sign vars, always perform comparisons as signed |
| and use >, < and == operators for it. |
| |
| 2022-02-03 Martin Sebor <msebor@redhat.com> |
| |
| * common.opt (-Wuse-after-free): Correct typos. |
| |
| 2022-02-02 David Malcolm <dmalcolm@redhat.com> |
| |
| PR analyzer/104270 |
| * doc/invoke.texi (-ftrivial-auto-var-init=): Add reference to |
| -Wanalyzer-use-of-uninitialized-value to paragraph documenting that |
| -ftrivial-auto-var-init= doesn't suppress warnings. |
| |
| 2022-02-02 Martin Liska <mliska@suse.cz> |
| |
| * dwarf2out.cc (TEXT_SECTION_NAME): Remove unused macro. |
| |
| 2022-02-02 Bernd Kuhls <bernd.kuhls@t-online.de> |
| |
| PR target/94372 |
| * config/or1k/linux.h (CPP_SPEC): Define. |
| |
| 2022-02-02 Tamar Christina <tamar.christina@arm.com> |
| |
| PR tree-optimization/102819 |
| PR tree-optimization/103169 |
| * config/arm/vec-common.md (cml<fcmac1><conj_op><mode>4): Use |
| canonical order. |
| |
| 2022-02-02 Tamar Christina <tamar.christina@arm.com> |
| |
| PR tree-optimization/102819 |
| PR tree-optimization/103169 |
| * config/aarch64/aarch64-simd.md (cml<fcmac1><conj_op><mode>4): Use |
| canonical order. |
| * config/aarch64/aarch64-sve.md (cml<fcmac1><conj_op><mode>4): Likewise. |
| |
| 2022-02-02 Tamar Christina <tamar.christina@arm.com> |
| |
| PR tree-optimization/102819 |
| PR tree-optimization/103169 |
| * doc/md.texi: Update docs for cfms, cfma. |
| * tree-data-ref.h (same_data_refs): Accept optional offset. |
| * tree-vect-slp-patterns.cc (is_linear_load_p): Fix issue with repeating |
| patterns. |
| (vect_normalize_conj_loc): Remove. |
| (is_eq_or_top): Change to take two nodes. |
| (enum _conj_status, compatible_complex_nodes_p, |
| vect_validate_multiplication): New. |
| (class complex_add_pattern, complex_add_pattern::matches, |
| complex_add_pattern::recognize, class complex_mul_pattern, |
| complex_mul_pattern::recognize, class complex_fms_pattern, |
| complex_fms_pattern::recognize, class complex_operations_pattern, |
| complex_operations_pattern::recognize, addsub_pattern::recognize): Pass |
| new cache. |
| (complex_fms_pattern::matches, complex_mul_pattern::matches): Pass new |
| cache and use new validation code. |
| * tree-vect-slp.cc (vect_match_slp_patterns_2, vect_match_slp_patterns, |
| vect_analyze_slp): Pass along cache. |
| (compatible_calls_p): Expose. |
| * tree-vectorizer.h (compatible_calls_p, slp_node_hash, |
| slp_compat_nodes_map_t): New. |
| (class vect_pattern): Update signatures include new cache. |
| |
| 2022-02-02 Hans-Peter Nilsson <hp@axis.com> |
| |
| * config/cris/cris.cc (cris_preferred_reload_class): Reject |
| "eliminated" registers and small-enough constants unless |
| reloaded into a class that is a subset of GENERAL_REGS. |
| * config/cris/cris.md (attribute "cpu_variant"): New. |
| (attribute "enabled"): Conditionalize on a matching attribute |
| cpu_variant, if specified. |
| ("*movsi_internal<setcc><setnz><setnzvc>"): For moves to and from |
| memory, add cpu-variant-enabled variants for "r" alternatives on |
| the far side of the "x" alternatives, preferring the "x" ones |
| only for variants where MOF is present (in addition to SRP). |
| |
| 2022-02-02 Hans-Peter Nilsson <hp@axis.com> |
| |
| * config/cris/cris.cc (cris_register_move_cost): Remove special pre-ira |
| extra cost for ALL_REGS. |
| |
| 2022-02-02 Hans-Peter Nilsson <hp@axis.com> |
| |
| * config/cris/constraints.md (define_register_constraint "b"): Now |
| GENERAL_REGS. |
| * config/cris/cris.md (CRIS_ACR_REGNUM): Remove. |
| * config/cris/cris.h: (reg_class, REG_CLASS_NAMES) |
| (REG_CLASS_CONTENTS): Remove ACR_REGS, SPEC_ACR_REGS, GENNONACR_REGS, |
| and SPEC_GENNONACR_REGS. |
| * config/cris/cris.cc (cris_preferred_reload_class): Don't mention |
| ACR_REGS and return GENERAL_REGS instead of GENNONACR_REGS. |
| |
| 2022-02-02 Hans-Peter Nilsson <hp@axis.com> |
| |
| * config/cris/cris.md ("*movsi_internal<setcc><setnz><setnzvc>"): |
| Conditionalize on (sub-)register operands or operand 1 being 0. |
| |
| 2022-02-02 Hans-Peter Nilsson <hp@axis.com> |
| |
| * config/cris/cris.h (TARGET_DEFAULT): Don't include MASK_MUL_BUG. |
| (MUL_BUG_ASM_DEFAULT): New macro. |
| (MAYBE_AS_NO_MUL_BUG_ABORT): Define in terms of MUL_BUG_ASM_DEFAULT. |
| * doc/invoke.texi (CRIS Options, -mmul-bug-workaround): Adjust |
| accordingly. |
| |
| 2022-02-01 Eugene Rozenfeld <erozen@microsoft.com> |
| |
| * opts.cc (common_handle_option): Don't set param_early_inliner_max_iterations |
| to 10 for AutoFDO. |
| |
| 2022-02-01 Eugene Rozenfeld <erozen@microsoft.com> |
| |
| * auto-profile.cc (auto_profile): Hard-code the number of iterations (10). |
| |
| 2022-02-01 Andrew Pinski <apinski@marvell.com> |
| |
| * doc/install.texi: |
| |
| 2022-02-01 Ilya Leoshkevich <iii@linux.ibm.com> |
| |
| * config/s390/s390.cc (s390_code_end): Do not switch back to |
| code section. |
| |
| 2022-02-01 Jakub Jelinek <jakub@redhat.com> |
| |
| PR target/104323 |
| * config/rs6000/t-rs6000 (EXTRA_GTYPE_DEPS): Append rs6000-builtins.h |
| rather than $(srcdir)/config/rs6000/rs6000-builtins.def. |
| * config/rs6000/rs6000-gen-builtins.cc (write_decls): Don't use |
| GTY((user)) for struct bifdata and struct ovlddata. Instead add |
| GTY((skip(""))) to members with pointer and enum types that don't need |
| to be tracked. Add GTY(()) to rs6000_builtin_info and rs6000_instance_info |
| declarations. Don't emit gt_ggc_mx and gt_pch_nx declarations. |
| (write_extern_fntype, write_fntype): Remove. |
| (write_fntype_init): Emit the fntype vars as automatic vars instead |
| of file scope ones. |
| (write_header_file): Don't iterate with write_extern_fntype. |
| (write_init_file): Don't iterate with write_fntype. Don't emit |
| gt_ggc_mx and gt_pch_nx definitions. |
| |
| 2022-02-01 Jason Merrill <jason@redhat.com> |
| |
| * tree.h (struct tree_vec_map_cache_hasher): Move from... |
| * tree.cc (struct tree_vec_map_cache_hasher): ...here. |
| |
| 2022-02-01 Tom de Vries <tdevries@suse.de> |
| |
| * config/nvptx/nvptx.cc (nvptx_single): Use nvptx_uniform_warp_check. |
| * config/nvptx/nvptx.md (define_c_enum "unspecv"): Add |
| UNSPECV_UNIFORM_WARP_CHECK. |
| (define_insn "nvptx_uniform_warp_check"): New define_insn. |
| |
| 2022-02-01 Tom de Vries <tdevries@suse.de> |
| |
| * config/nvptx/nvptx.cc (nvptx_single): Use nvptx_warpsync. |
| * config/nvptx/nvptx.md (define_c_enum "unspecv"): Add |
| UNSPECV_WARPSYNC. |
| (define_insn "nvptx_warpsync"): New define_insn. |
| |
| 2022-02-01 Tom de Vries <tdevries@suse.de> |
| |
| * config/nvptx/nvptx.opt (mptx): Set to PTX_VERSION_6_3 by default. |
| |
| 2022-02-01 Tom de Vries <tdevries@suse.de> |
| |
| * config/nvptx/nvptx-opts.h (enum ptx_version): Add PTX_VERSION_6_0. |
| * config/nvptx/nvptx.h (TARGET_PTX_6_0): New macro. |
| * config/nvptx/nvptx.md (define_insn "nvptx_barsync"): Use barrier |
| insn for TARGET_PTX_6_0. |
| |
| 2022-02-01 Tom de Vries <tdevries@suse.de> |
| |
| PR target/100428 |
| * config/nvptx/nvptx.cc (prevent_branch_around_nothing): Handle nop |
| insn. |
| |
| 2022-02-01 Tom de Vries <tdevries@suse.de> |
| |
| * config/nvptx/nvptx.md (define_insn "atomic_compare_and_swap<mode>_1") |
| (define_insn "atomic_exchange<mode>") |
| (define_insn "atomic_fetch_add<mode>") |
| (define_insn "atomic_fetch_addsf") |
| (define_insn "atomic_fetch_<logic><mode>"): Output non-atomic version |
| if memory operands is frame-relative. |
| |
| 2022-02-01 Tom de Vries <tdevries@suse.de> |
| |
| * config/nvptx/nvptx.cc (enum nvptx_builtins): Add |
| NVPTX_BUILTIN_MEMBAR_GL and NVPTX_BUILTIN_MEMBAR_CTA. |
| (VOID): New macro. |
| (nvptx_init_builtins): Add MEMBAR_GL and MEMBAR_CTA. |
| (nvptx_expand_builtin): Handle NVPTX_BUILTIN_MEMBAR_GL and |
| NVPTX_BUILTIN_MEMBAR_CTA. |
| (nvptx_lockfull_update): Add level parameter. Emit barriers. |
| (nvptx_reduction_update, nvptx_goacc_reduction_fini): Update call to |
| nvptx_lockfull_update. |
| * config/nvptx/nvptx.md (define_c_enum "unspecv"): Add |
| UNSPECV_MEMBAR_GL. |
| (define_expand "nvptx_membar_gl"): New expand. |
| (define_insn "*nvptx_membar_gl"): New insn. |
| |
| 2022-02-01 Martin Liska <mliska@suse.cz> |
| |
| * doc/install.texi: Remove option for GCC < 4.8. |
| |
| 2022-02-01 Jakub Jelinek <jakub@redhat.com> |
| |
| PR middle-end/104307 |
| * tree-vect-generic.cc (expand_vector_comparison): Don't push debug |
| stmts to uses vector, just set vec_cond_expr_only to false for |
| non-VEC_COND_EXPRs instead of pushing them into uses. Treat |
| VEC_COND_EXPRs that use lhs not just in rhs1, but rhs2 or rhs3 too |
| like non-VEC_COND_EXPRs. |
| |
| 2022-02-01 Bill Schmidt <wschmidt@linux.ibm.com> |
| |
| * config/rs6000/rs6000-overload.def (VEC_ABSD): Remove #ifdef token. |
| (VEC_BLENDV): Likewise. |
| (VEC_BPERM): Likewise. |
| (VEC_CFUGE): Likewise. |
| (VEC_CIPHER_BE): Likewise. |
| (VEC_CIPHERLAST_BE): Likewise. |
| (VEC_CLRL): Likewise. |
| (VEC_CLRR): Likewise. |
| (VEC_CMPNEZ): Likewise. |
| (VEC_CNTLZ): Likewise. |
| (VEC_CNTLZM): Likewise. |
| (VEC_CNTTZM): Likewise. |
| (VEC_CNTLZ_LSBB): Likewise. |
| (VEC_CNTM): Likewise. |
| (VEC_CNTTZ): Likewise. |
| (VEC_CNTTZ_LSBB): Likewise. |
| (VEC_CONVERT_4F32_8F16): Likewise. |
| (VEC_DIV): Likewise. |
| (VEC_DIVE): Likewise. |
| (VEC_EQV): Likewise. |
| (VEC_EXPANDM): Likewise. |
| (VEC_EXTRACT_FP_FROM_SHORTH): Likewise. |
| (VEC_EXTRACT_FP_FROM_SHORTL): Likewise. |
| (VEC_EXTRACTH): Likewise. |
| (VEC_EXTRACTL): Likewise. |
| (VEC_EXTRACTM): Likewise. |
| (VEC_EXTRACT4B): Likewise. |
| (VEC_EXTULX): Likewise. |
| (VEC_EXTURX): Likewise. |
| (VEC_FIRSTMATCHINDEX): Likewise. |
| (VEC_FIRSTMACHOREOSINDEX): Likewise. |
| (VEC_FIRSTMISMATCHINDEX): Likewise. |
| (VEC_FIRSTMISMATCHOREOSINDEX): Likewise. |
| (VEC_GB): Likewise. |
| (VEC_GENBM): Likewise. |
| (VEC_GENHM): Likewise. |
| (VEC_GENWM): Likewise. |
| (VEC_GENDM): Likewise. |
| (VEC_GENQM): Likewise. |
| (VEC_GENPCVM): Likewise. |
| (VEC_GNB): Likewise. |
| (VEC_INSERTH): Likewise. |
| (VEC_INSERTL): Likewise. |
| (VEC_INSERT4B): Likewise. |
| (VEC_LXVL): Likewise. |
| (VEC_MERGEE): Likewise. |
| (VEC_MERGEO): Likewise. |
| (VEC_MOD): Likewise. |
| (VEC_MSUB): Likewise. |
| (VEC_MULH): Likewise. |
| (VEC_NAND): Likewise. |
| (VEC_NCIPHER_BE): Likewise. |
| (VEC_NCIPHERLAST_BE): Likewise. |
| (VEC_NEARBYINT): Likewise. |
| (VEC_NMADD): Likewise. |
| (VEC_ORC): Likewise. |
| (VEC_PDEP): Likewise. |
| (VEC_PERMX): Likewise. |
| (VEC_PEXT): Likewise. |
| (VEC_POPCNT): Likewise. |
| (VEC_PARITY_LSBB): Likewise. |
| (VEC_REPLACE_ELT): Likewise. |
| (VEC_REPLACE_UN): Likewise. |
| (VEC_REVB): Likewise. |
| (VEC_RINT): Likewise. |
| (VEC_RLMI): Likewise. |
| (VEC_RLNM): Likewise. |
| (VEC_SBOX_BE): Likewise. |
| (VEC_SIGNEXTI): Likewise. |
| (VEC_SIGNEXTLL): Likewise. |
| (VEC_SIGNEXTQ): Likewise. |
| (VEC_SLDB): Likewise. |
| (VEC_SLV): Likewise. |
| (VEC_SPLATI): Likewise. |
| (VEC_SPLATID): Likewise. |
| (VEC_SPLATI_INS): Likewise. |
| (VEC_SQRT): Likewise. |
| (VEC_SRDB): Likewise. |
| (VEC_SRV): Likewise. |
| (VEC_STRIL): Likewise. |
| (VEC_STRIL_P): Likewise. |
| (VEC_STRIR): Likewise. |
| (VEC_STRIR_P): Likewise. |
| (VEC_STXVL): Likewise. |
| (VEC_TERNARYLOGIC): Likewise. |
| (VEC_TEST_LSBB_ALL_ONES): Likewise. |
| (VEC_TEST_LSBB_ALL_ZEROS): Likewise. |
| (VEC_VEE): Likewise. |
| (VEC_VES): Likewise. |
| (VEC_VIE): Likewise. |
| (VEC_VPRTYB): Likewise. |
| (VEC_VSCEEQ): Likewise. |
| (VEC_VSCEGT): Likewise. |
| (VEC_VSCELT): Likewise. |
| (VEC_VSCEUO): Likewise. |
| (VEC_VSEE): Likewise. |
| (VEC_VSES): Likewise. |
| (VEC_VSIE): Likewise. |
| (VEC_VSTDC): Likewise. |
| (VEC_VSTDCN): Likewise. |
| (VEC_VTDC): Likewise. |
| (VEC_XL): Likewise. |
| (VEC_XL_BE): Likewise. |
| (VEC_XL_LEN_R): Likewise. |
| (VEC_XL_SEXT): Likewise. |
| (VEC_XL_ZEXT): Likewise. |
| (VEC_XST): Likewise. |
| (VEC_XST_BE): Likewise. |
| (VEC_XST_LEN_R): Likewise. |
| (VEC_XST_TRUNC): Likewise. |
| (VEC_XXPERMDI): Likewise. |
| (VEC_XXSLDWI): Likewise. |
| (VEC_TSTSFI_EQ_DD): Likewise. |
| (VEC_TSTSFI_EQ_TD): Likewise. |
| (VEC_TSTSFI_GT_DD): Likewise. |
| (VEC_TSTSFI_GT_TD): Likewise. |
| (VEC_TSTSFI_LT_DD): Likewise. |
| (VEC_TSTSFI_LT_TD): Likewise. |
| (VEC_TSTSFI_OV_DD): Likewise. |
| (VEC_TSTSFI_OV_TD): Likewise. |
| (VEC_VADDCUQ): Likewise. |
| (VEC_VADDECUQ): Likewise. |
| (VEC_VADDEUQM): Likewise. |
| (VEC_VADDUDM): Likewise. |
| (VEC_VADDUQM): Likewise. |
| (VEC_VBPERMQ): Likewise. |
| (VEC_VCLZB): Likewise. |
| (VEC_VCLZD): Likewise. |
| (VEC_VCLZH): Likewise. |
| (VEC_VCLZW): Likewise. |
| (VEC_VCTZB): Likewise. |
| (VEC_VCTZD): Likewise. |
| (VEC_VCTZH): Likewise. |
| (VEC_VCTZW): Likewise. |
| (VEC_VEEDP): Likewise. |
| (VEC_VEESP): Likewise. |
| (VEC_VESDP): Likewise. |
| (VEC_VESSP): Likewise. |
| (VEC_VIEDP): Likewise. |
| (VEC_VIESP): Likewise. |
| (VEC_VPKSDSS): Likewise. |
| (VEC_VPKSDUS): Likewise. |
| (VEC_VPKUDUM): Likewise. |
| (VEC_VPKUDUS): Likewise. |
| (VEC_VPOPCNT): Likewise. |
| (VEC_VPOPCNTB): Likewise. |
| (VEC_VPOPCNTD): Likewise. |
| (VEC_VPOPCNTH): Likewise. |
| (VEC_VPOPCNTW): Likewise. |
| (VEC_VPRTYBD): Likewise. |
| (VEC_VPRTYBQ): Likewise. |
| (VEC_VPRTYBW): Likewise. |
| (VEC_VRLD): Likewise. |
| (VEC_VSLD): Likewise. |
| (VEC_VSRAD): Likewise. |
| (VEC_VSRD): Likewise. |
| (VEC_VSTDCDP): Likewise. |
| (VEC_VSTDCNDP): Likewise. |
| (VEC_VSTDCNQP): Likewise. |
| (VEC_VSTDCNSP): Likewise. |
| (VEC_VSTDCQP): Likewise. |
| (VEC_VSTDCSP): Likewise. |
| (VEC_VSUBECUQ): Likewise. |
| (VEC_VSUBEUQM): Likewise. |
| (VEC_VSUBUDM): Likewise. |
| (VEC_VSUBUQM): Likewise. |
| (VEC_VTDCDP): Likewise. |
| (VEC_VTDCSP): Likewise. |
| (VEC_VUPKHSW): Likewise. |
| (VEC_VUPKLSW): Likewise. |
| |
| 2022-02-01 Andreas Krebbel <krebbel@linux.ibm.com> |
| |
| PR rtl-optimization/101260 |
| * regcprop.cc (maybe_mode_change): Invoke mode_change_ok also for |
| copy_regno. |
| |
| 2022-02-01 Xi Ruoyao <xry111@mengyan1223.wang> |
| |
| PR middle-end/95115 |
| * fold-const.cc (const_binop): Do not fold NaN result from |
| non-NaN operands. |
| |
| 2022-02-01 Tom de Vries <tdevries@suse.de> |
| |
| * tree-loop-distribution.cc (generate_reduction_builtin_1): Check for |
| -ftree-loop-distribute-patterns. |
| (loop_distribution::execute): Don't call transform_reduction_loop for |
| -fno-tree-loop-distribute-patterns. |
| |
| 2022-01-31 Andrew Pinski <apinski@marvell.com> |
| |
| * fold-const.h (operand_compare::operand_equal_p): |
| Fix comment about OEP_* flags. |
| |
| 2022-01-31 Jakub Jelinek <jakub@redhat.com> |
| |
| PR target/104298 |
| * config/rs6000/aix.h (OPTION_GLIBC): Remove. |
| * config/rs6000/darwin.h (OPTION_GLIBC): Likewise. |
| * config/rs6000/option-defaults.h (OPTION_GLIBC): Define to 0 |
| if not already defined. |
| |
| 2022-01-31 Martin Sebor <msebor@redhat.com> |
| |
| PR middle-end/104232 |
| * gimple-ssa-warn-access.cc (pointers_related_p): Add argument. |
| Handle PHIs. Add a synonymous overload. |
| (pass_waccess::check_pointer_uses): Call pointers_related_p. |
| |
| 2022-01-31 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/100499 |
| * fold-const.cc (multiple_of_p): Pass the correct type of |
| the expression to the recursive invocation of multiple_of_p |
| for conversions and use CASE_CONVERT. |
| |
| 2022-01-31 Eric Botcazou <ebotcazou@adacore.com> |
| |
| PR target/104189 |
| * config/sparc/linux64.h (TARGET_DEFAULT): Add MASK_V8PLUS. |
| |
| 2022-01-31 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/100499 |
| * tree-cfg.cc (verify_gimple_assign_ternary): Use multiple_p |
| on poly-ints instead of multiple_of_p. |
| * tree-ssa.cc (maybe_rewrite_mem_ref_base): Likewise. |
| (non_rewritable_mem_ref_base): Likewise. |
| (non_rewritable_lvalue_p): Likewise. |
| (execute_update_addresses_taken): Likewise. |
| |
| 2022-01-29 Jakub Jelinek <jakub@redhat.com> |
| Andrew Pinski <apinski@marvell.com> |
| |
| PR tree-optimization/104279 |
| PR tree-optimization/104280 |
| PR tree-optimization/104281 |
| * match.pd (1 / X -> X == 1 for unsigned X): Build eq with |
| boolean_type_node and convert to type. Formatting fixes. |
| |
| 2022-01-28 Yoshinori Sato <yo-satoh@sios.com> |
| |
| * config/sh/t-linux (MULTILIB_EXCEPTIONS): Add m1, mb/m1 and m2a. |
| |
| 2022-01-28 Navid Rahimi <navidrahimi@microsoft.com> |
| |
| PR tree-optimization/103514 |
| * match.pd (a & b) ^ (a == b) -> !(a | b): New optimization. |
| (a & b) == (a ^ b) -> !(a | b): New optimization. |
| |
| 2022-01-28 Marek Polacek <polacek@redhat.com> |
| |
| * doc/invoke.texi: Update -Wbidi-chars documentation. |
| |
| 2022-01-28 Iain Sandoe <iain@sandoe.co.uk> |
| |
| * config/rs6000/darwin.h (OPTION_GLIBC): Define to 0. |
| |
| 2022-01-28 Zhao Wei Liew <zhaoweiliew@gmail.com> |
| |
| PR tree-optimization/95424 |
| * match.pd: Simplify 1 / X where X is an integer. |
| |
| 2022-01-28 Jakub Jelinek <jakub@redhat.com> |
| |
| PR tree-optimization/104263 |
| * gimple-ssa-store-merging.cc (get_status_for_store_merging): For |
| cfun->can_throw_non_call_exceptions && cfun->eh test whether |
| last non-debug stmt in the bb is store_valid_for_store_merging_p |
| rather than last stmt. |
| |
| 2022-01-28 Martin Liska <mliska@suse.cz> |
| |
| * diagnostic.cc (diagnostic_action_after_output): Remove extra |
| newline. |
| |
| 2022-01-28 Martin Liska <mliska@suse.cz> |
| |
| * config/rs6000/host-darwin.cc (segv_crash_handler): |
| Do not use leading capital letter. |
| (segv_handler): Likewise. |
| * ipa-sra.cc (verify_splitting_accesses): Likewise. |
| * varasm.cc (get_section): Likewise. |
| |
| 2022-01-28 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/104267 |
| * tree-vect-stmts.cc (vectorizable_call): Properly use the |
| per-argument determined vector type for externals and |
| invariants. |
| |
| 2022-01-28 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/104263 |
| * tree-cfg.cc (gimple_purge_dead_abnormal_call_edges): |
| Purge edges also when !cfun->has_nonlocal_label |
| and !cfun->calls_setjmp. |
| |
| 2022-01-28 Maciej W. Rozycki <macro@embecosm.com> |
| |
| * config/riscv/riscv.md: Document `auipc' and `bitmanip' `type' |
| attributes. |
| |
| 2022-01-28 Jakub Jelinek <jakub@redhat.com> |
| |
| PR lto/104237 |
| * cfgrtl.cc (loc_equal): New function. |
| (unique_locus_on_edge_between_p): Use it. |
| |
| 2022-01-28 Richard Biener <rguenther@suse.de> |
| |
| * cfganal.h (mark_dfs_back_edges): Provide API with struct |
| function argument. |
| * cfganal.cc (mark_dfs_back_edges): Take a struct function |
| to work on, add a wrapper passing cfun. |
| * graph.cc (draw_cfg_nodes_no_loops): Replace stray cfun |
| uses with fun which is already passed. |
| (draw_cfg_edges): Likewise. |
| (draw_cfg_nodes_for_loop): Do not use draw_cfg_nodes_for_loop |
| for fun != cfun. |
| |
| 2022-01-27 Patrick Palka <ppalka@redhat.com> |
| |
| PR c++/99895 |
| * tree.cc (build_call_vec): Add const to second parameter. |
| * tree.h (build_call_vec): Likewise. |
| |
| 2022-01-27 Martin Liska <mliska@suse.cz> |
| |
| PR web/104254 |
| * diagnostic.cc (diagnostic_initialize): |
| Initialize report_bug flag. |
| (diagnostic_action_after_output): |
| Explain that -freport-bug option can be used for pre-processed |
| file creation. Make the message shorter. |
| (error_recursion): Rename Internal to internal. |
| * diagnostic.h (struct diagnostic_context): New field. |
| * opts.cc (common_handle_option): Init the field here. |
| |
| 2022-01-27 Kewen Lin <linkw@linux.ibm.com> |
| |
| PR target/103702 |
| * config/rs6000/rs6000.cc |
| (rs6000_cost_data::update_target_cost_per_stmt): Fix one wrong |
| assertion with early return. |
| |
| 2022-01-27 Chung-Lin Tang <cltang@codesourcery.com> |
| |
| PR middle-end/103642 |
| * gimplify.cc (gimplify_scan_omp_clauses): Do not do indir_p handling |
| for non-pointer or non-reference-to-pointer cases. |
| |
| 2022-01-27 Jakub Jelinek <jakub@redhat.com> |
| |
| PR tree-optimization/104196 |
| * gimple-fold.h (rewrite_to_defined_overflow): Add IN_PLACE argument. |
| * gimple-fold.cc (rewrite_to_defined_overflow): Likewise. If true, |
| return NULL and emit needed stmts before and after stmt. |
| * tree-ssa-reassoc.cc (update_range_test): For inter-bb range opt |
| pick as operand_entry that will hold the merged test the one feeding |
| earliest condition, ensure that by swapping range->idx with some |
| other range's idx if needed. If seq is non-NULL, don't actually swap |
| it but instead rewrite stmts with undefined overflow in between |
| the two locations. |
| (maybe_optimize_range_tests): Set ops[]->id to bb->index with the |
| corresponding condition even if they have non-NULL ops[]->op. |
| Formatting fix. |
| |
| 2022-01-26 Jakub Jelinek <jakub@redhat.com> |
| |
| PR target/104239 |
| * config/rs6000/emmintrin.h (_mm_sad_epu8): Use __asm__ instead of |
| asm. |
| * config/rs6000/smmintrin.h (_mm_minpos_epu16): Declare iterator |
| before for loop instead of for init clause. |
| * config/rs6000/bmi2intrin.h (_pext_u64): Likewise. |
| |
| 2022-01-26 Jakub Jelinek <jakub@redhat.com> |
| |
| PR target/104239 |
| * config/rs6000/bmiintrin.h: Test _X86GPRINTRIN_H_INCLUDED instead of |
| _X86INTRIN_H_INCLUDED and adjust #error wording. |
| * config/rs6000/bmi2intrin.h: Likewise. |
| |
| 2022-01-26 Jakub Jelinek <jakub@redhat.com> |
| |
| PR debug/104194 |
| * dwarf2out.cc (long_double_as_float128): New function. |
| (modified_type_die): For powerpc64le IEEE 754 quad long double |
| and complex long double emit those as DW_TAG_typedef to |
| _Float128 or complex _Float128 base type. |
| |
| 2022-01-26 Marek Polacek <polacek@redhat.com> |
| |
| PR target/104213 |
| * gimple-ssa-warn-access.cc (pass_waccess::warn_invalid_pointer): Don't |
| warn when the SSA_NAME_VAR of REF has supressed -Wuse-after-free. |
| |
| 2022-01-26 Martin Liska <mliska@suse.cz> |
| |
| * ipa-modref-tree.cc (modref_access_node::update): |
| Remove "--param param=foo" with "--param foo". |
| (modref_access_node::insert): Likewise. |
| (modref_access_node::insert_kill): Likewise. |
| * ipa-modref-tree.h (struct modref_ref_node): Likewise. |
| (struct modref_base_node): Likewise. |
| (struct modref_tree): Likewise. |
| |
| 2022-01-26 Raoni Fassina Firmino <raoni@linux.ibm.com> |
| |
| PR target/94193 |
| * builtins.cc (expand_builtin_feclear_feraise_except): Add op0 |
| predicate check. |
| |
| 2022-01-25 Martin Sebor <msebor@redhat.com> |
| |
| PR tree-optimization/104203 |
| * gimple-ssa-warn-access.cc (pass_data pass_data_waccess): Use |
| TV_WARN_ACCESS. |
| * pointer-query.cc (access_ref::merge_ref): Change return type. |
| Convert failure to a conservative success. |
| (access_ref::get_ref): Adjust to the change above. Short-circuit |
| PHI evaluation after first failure turned into conservative success. |
| * pointer-query.h (access_ref::merge_ref): Change return type. |
| * timevar.def (TV_WARN_ACCESS): New timer variable. |
| |
| 2022-01-25 David Edelsohn <dje.gcc@gmail.com> |
| |
| * config/rs6000/aix.h (OPTION_GLIBC): Define as 0. |
| |
| 2022-01-25 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/104214 |
| * tree-ssa-loop-niter.cc (number_of_iterations_cond): Use |
| stronger guarantees for relational pointer compares when |
| rewriting BASE0 + STEP0 cmp BASE1 + STEP1 as |
| BASE0 + STEP0 - STEP1 cmp BASE1. |
| |
| 2022-01-25 Jakub Jelinek <jakub@redhat.com> |
| |
| PR target/104172 |
| * config/rs6000/rs6000-internal.h (rs6000_passes_ieee128): Don't |
| declare. |
| * config/rs6000/rs6000.cc (rs6000_passes_ieee128, |
| ieee128_mangling_gcc_8_1): Remove. |
| (TARGET_ASM_GLOBALIZE_DECL_NAME): Don't redefine. |
| (rs6000_mangle_type): Return "u9__ieee128" instead of |
| ieee128_mangling_gcc_8_1 ? "U10__float128" : "u9__ieee128". |
| (rs6000_globalize_decl_name): Remove. |
| * config/rs6000/rs6000-call.cc (init_cumulative_args, |
| rs6000_function_arg_advance_1): Don't set rs6000_passes_ieee128. |
| |
| 2022-01-24 Martin Sebor <msebor@redhat.com> |
| |
| * pointer-query.cc (pointer_query::dump): Remove duplicate |
| block. |
| |
| 2022-01-24 Marek Polacek <polacek@redhat.com> |
| |
| PR preprocessor/104030 |
| * doc/invoke.texi: Update documentation for -Wbidi-chars. |
| |
| 2022-01-24 Raoni Fassina Firmino <raoni@linux.ibm.com> |
| |
| PR target/94193 |
| * builtins.cc (expand_builtin_fegetround): New function. |
| (expand_builtin_feclear_feraise_except): New function. |
| (expand_builtin): Add cases for BUILT_IN_FEGETROUND, |
| BUILT_IN_FECLEAREXCEPT and BUILT_IN_FERAISEEXCEPT. |
| * config/rs6000/rs6000.md (fegetroundsi): New pattern. |
| (feclearexceptsi): New Pattern. |
| (feraiseexceptsi): New Pattern. |
| * doc/extend.texi: Add a new introductory paragraph about the |
| new builtins. |
| * doc/md.texi: (fegetround@var{m}): Document new optab. |
| (feclearexcept@var{m}): Document new optab. |
| (feraiseexcept@var{m}): Document new optab. |
| * optabs.def (fegetround_optab): New optab. |
| (feclearexcept_optab): New optab. |
| (feraiseexcept_optab): New optab. |
| |
| 2022-01-24 Richard Biener <rguenther@suse.de> |
| Jiufu Guo <guojiufu@linux.ibm.com> |
| |
| PR tree-optimization/100740 |
| PR tree-optimization/101508 |
| PR tree-optimization/101972 |
| PR tree-optimization/102131 |
| * tree-ssa-loop-niter.cc (number_of_iterations_cond): Properly |
| constrain BASE0 + STEP0 cmp BASE1 + STEP1 to |
| BASE0 + STEP0 - STEP1 cmp BASE1 transform. |
| |
| 2022-01-24 Jakub Jelinek <jakub@redhat.com> |
| |
| PR sanitizer/104158 |
| * opt-functions.awk (var_set): Handle EnumBitSet property. |
| * optc-gen.awk: Don't disallow RejectNegative if EnumBitSet is |
| specified. |
| * opts.h (enum cl_enum_var_value): New type. |
| * opts-common.cc (decode_cmdline_option): Use CLEV_* values. |
| Handle CLEV_BITSET. |
| (cmdline_handle_error): Handle CLEV_BITSET. |
| * opts.cc (test_enum_sets): Also test EnumBitSet requirements. |
| * doc/options.texi (EnumBitSet): Document. |
| * common.opt (fsanitize-coverage=): Use EnumBitSet instead of |
| EnumSet. |
| (trace-pc, trace-cmp): Drop Set properties. |
| |
| 2022-01-24 Jakub Jelinek <jakub@redhat.com> |
| |
| PR sanitizer/104158 |
| * common.opt (flag_sanitize_coverage): Remove Variable entry. |
| (fsanitize-coverage=): Remove RejectNegative property, add |
| Var(flag_sanitize_coverage) and EnumSet properties. |
| (trace-pc): Add Set(1) property. |
| (trace-cmp): Add Set(2) property. |
| * opts.cc (common_handle_option): Don't handle |
| OPT_fsanitize_coverage_. |
| |
| 2022-01-24 Jakub Jelinek <jakub@redhat.com> |
| |
| PR sanitizer/104158 |
| * opt-functions.awk (var_set): Handle EnumSet property. |
| * optc-gen.awk: Don't disallow RejectNegative if EnumSet is |
| specified. |
| * opt-read.awk: Handle Set property. |
| * opts.h (CL_ENUM_SET_SHIFT, CL_ERR_ENUM_SET_ARG): Define. |
| (struct cl_decoded_option): Mention enum in value description. |
| Add mask member. |
| (set_option): Add mask argument defaulted to 0. |
| * opts.cc (test_enum_sets): New function. |
| (opts_cc_tests): Call it. |
| * opts-common.cc (enum_arg_to_value): Change return argument |
| from bool to int, on success return index into the cl_enum_arg |
| array, on failure -1. Add len argument, if non-0, use strncmp |
| instead of strcmp. |
| (opt_enum_arg_to_value): Adjust caller. |
| (decode_cmdline_option): Handle EnumSet represented as |
| CLVC_ENUM with non-zero var_value. Initialize decoded->mask. |
| (decode_cmdline_options_to_array): CLear opt_array[0].mask. |
| (handle_option): Pass decoded->mask to set_options last argument. |
| (generate_option): Clear decoded->mask. |
| (generate_option_input_file): Likewise. |
| (cmdline_handle_error): Handle CL_ERR_ENUM_SET_ARG. |
| (set_option): Add mask argument, use it for CLVC_ENUM. |
| (control_warning_option): Adjust enum_arg_to_value caller. |
| * doc/options.texi: Document Set and EnumSet properties. |
| |
| 2022-01-24 Jakub Jelinek <jakub@redhat.com> |
| |
| PR bootstrap/104170 |
| * config/linux.h (OPTION_GLIBC_P, OPTION_UCLIBC_P, |
| OPTION_BIONIC_P, OPTION_MUSL_P): Define. |
| (OPTION_GLIBC, OPTION_UCLIBC, OPTION_BIONIC, OPTION_MUSL): Redefine |
| using OPTION_*_P macros. |
| * config/alpha/linux.h (OPTION_GLIBC_P, OPTION_UCLIBC_P, |
| OPTION_BIONIC_P, OPTION_MUSL_P): Define. |
| (OPTION_GLIBC, OPTION_UCLIBC, OPTION_BIONIC, OPTION_MUSL): Redefine |
| using OPTION_*_P macros. |
| * config/rs6000/linux.h (OPTION_GLIBC_P, OPTION_UCLIBC_P, |
| OPTION_BIONIC_P, OPTION_MUSL_P): Define. |
| (OPTION_GLIBC, OPTION_UCLIBC, OPTION_BIONIC, OPTION_MUSL): Redefine |
| using OPTION_*_P macros. |
| * config/rs6000/linux64.h (OPTION_GLIBC_P, OPTION_UCLIBC_P, |
| OPTION_BIONIC_P, OPTION_MUSL_P): Define. |
| (OPTION_GLIBC, OPTION_UCLIBC, OPTION_BIONIC, OPTION_MUSL): Redefine |
| using OPTION_*_P macros. |
| * config/fuchsia.h (OPTION_MUSL_P): Redefine. |
| * config/glibc-stdint.h (OPTION_MUSL_P): Define if not defined. |
| * common/config/s390/s390-common.cc (s390_supports_split_stack): Re-add |
| ATTRIBUTE_UNUSED to opts parameter. If OPTION_GLIBC_P is defined, use |
| OPTION_GLIBC_P (opts) as condition, otherwise assume if (false). |
| * common/config/i386/i386-common.cc (ix86_supports_split_stack): If |
| OPTION_GLIBC_P is defined use !OPTION_GLIBC_P (opts) as condition, |
| otherwise assume if (true). |
| |
| 2022-01-24 Kito Cheng <kito.cheng@sifive.com> |
| |
| * common/config/riscv/riscv-common.cc (riscv_subset_list::to_string): |
| Skip zicsr and zifencei if I-ext is 2.0. |
| |
| 2022-01-24 Jia-Wei Chen <jiawei@iscas.ac.cn> |
| |
| * config.gcc: Modify default isa_spec version. |
| |
| 2022-01-24 Jiufu Guo <guojiufu@linux.ibm.com> |
| |
| PR tree-optimization/102087 |
| * tree-ssa-loop-niter.cc (number_of_iterations_until_wrap): |
| Correct PLUS result type. |
| |
| 2022-01-24 H.J. Lu <hjl.tools@gmail.com> |
| |
| PR target/104188 |
| * config/i386/predicates.md (bcst_mem_operand): Also check mode |
| of memory broadcast. |
| |
| 2022-01-23 Andrew Pinski <apinski@marvell.com> |
| |
| PR target/64821 |
| * config/aarch64/aarch64-builtins.cc |
| (aarch64_general_gimple_fold_builtin): Handle |
| __builtin_aarch64_sqrt* and simplify into SQRT internal |
| function. |
| |
| 2022-01-22 Jakub Jelinek <jakub@redhat.com> |
| |
| PR other/104176 |
| * opts-global.cc (handle_common_deferred_options): Quote |
| --enable-plugin in diagnostics to avoid -Werror=format-diag. |
| |
| 2022-01-21 Michael Meissner <meissner@the-meissners.org> |
| |
| PR target/104136 |
| * config/rs6000/rs6000-protos.h (prefixed_xxsplti_p): Delete. |
| * config/rs6000/rs6000.cc (prefixed_xxsplti_p): Delete. |
| * config/rs6000/rs6000.md (prefixed attribute): Delete section |
| that sets the prefixed attribute for xxspltiw, xxspltidp, and |
| xxsplti32dx instructions. |
| (movsf_hardfloat): Explicitly set the prefixed attribute |
| when xxspltiw and xxspltidp instructions are generated. |
| (mov<mode>_hardfloat32): Likewise. |
| (mov<mode>_hardfloat64): Likewise. |
| * config/rs6000/vsx.md (vsx_mov<mode>_64bit): Explicitly set the |
| prefixed attribute for xxspltiw and xxspltidp instructions. |
| (vsx_mov<mode>_32bit): Likewise. |
| |
| 2022-01-21 H.J. Lu <hjl.tools@gmail.com> |
| |
| PR bootstrap/104170 |
| * common/config/i386/i386-common.cc (ix86_supports_split_stack): |
| Return true only on glibc. |
| * config/i386/gnu-user-common.h (STACK_CHECK_STATIC_BUILTIN): |
| Revert commit c163647ffbc. |
| * config/i386/gnu.h (TARGET_LIBC_PROVIDES_SSP): Likewise. |
| |
| 2022-01-21 Sören Tempel <soeren@soeren-tempel.net> |
| |
| * common/config/s390/s390-common.cc (s390_supports_split_stack): |
| Only support split-stack on glibc targets. |
| * config/i386/gnu-user-common.h (STACK_CHECK_STATIC_BUILTIN): Ditto. |
| * config/i386/gnu.h (defined): Ditto. |
| |
| 2022-01-21 Bill Schmidt <wschmidt@linux.ibm.com> |
| |
| * config/rs6000/rs6000-overload.def (VEC_SLDW): Add instances for |
| vector float and vector double. |
| |
| 2022-01-21 Bill Seurer <seurer@gcc.gnu.org> |
| |
| * config/rs6000/rs6000.cc (rs6000_get_function_versions_dispatcher): |
| Fix mention of ifunc in string. |
| |
| 2022-01-21 Roger Sayle <roger@nextmovesoftware.com> |
| |
| PR middle-end/104140 |
| * tree-ssa-math-opts.cc (convert_mult_to_highpart): Check that the |
| operands of the widening multiplication are either both signed or |
| both unsigned, and abort the conversion if mismatched. |
| * doc/generic.texi (WIDEN_MULT_EXPR): Describe expression node. |
| (MULT_HIGHPART_EXPR): Clarify that operands must have the same |
| signedness. |
| * tree.def (MULT_HIGHPART_EXPR): Document both operands must have |
| integer types with the same precision and signedness. |
| (WIDEN_MULT_EXPR): Document that operands must have integer types |
| with the same precision, but possibly differing signedness. |
| * config/riscv/riscv-c.cc (riscv_cpu_cpp_builtins): Defend against |
| riscv_current_subset_list returning a NULL pointer (empty list). |
| |
| 2022-01-21 Vladimir N. Makarov <vmakarov@redhat.com> |
| |
| PR target/103676 |
| * ira.h (struct target_ira): Add member |
| x_ira_exclude_class_mode_regs. |
| (ira_exclude_class_mode_regs): New macro. |
| * lra.h (lra_create_new_reg): Add arg exclude_start_hard_regs and |
| move from here ... |
| * lra-int.h: ... to here. |
| (lra_create_new_reg_with_unique_value): Add arg |
| exclude_start_hard_regs. |
| (class lra_reg): Add member exclude_start_hard_regs. |
| * lra-assigns.cc (find_hard_regno_for_1): Setup |
| impossible_start_hard_regs from exclude_start_hard_regs. |
| * lra-constraints.cc (get_reload_reg): Add arg exclude_start_hard_regs and pass |
| it lra_create_new_reg[_with_unique_value]. |
| (match_reload): Ditto. |
| (check_and_process_move): Pass NULL |
| exclude_start_hard_regs to lra_create_new_reg_with_unique_value. |
| (goal_alt_exclude_start_hard_regs): New static variable. |
| (process_addr_reg, simplify_operand_subreg): Pass NULL |
| exclude_start_hard_regs to lra_create_new_reg_with_unique_value |
| and get_reload_reg. |
| (process_alt_operands): Setup goal_alt_exclude_start_hard_regs. |
| Use this_alternative_exclude_start_hard_regs additionally to find |
| winning operand alternative. |
| (base_to_reg, base_plus_disp_to_reg, index_part_to_reg): Pass NULL |
| exclude_start_hard_regs to lra_create_new_reg. |
| (process_address_1, emit_inc): Ditto. |
| (curr_insn_transform): Pass exclude_start_hard_regs value to |
| lra_create_new_reg, get_reload_reg, match_reload. |
| (inherit_reload_reg, split_reg): Pass NULL exclude_start_hard_regs |
| to lra_create_new_reg. |
| (process_invariant_for_inheritance): Ditto. |
| * lra-remat.cc (update_scratch_ops): Ditto. |
| * lra.cc (lra_create_new_reg_with_unique_value): Add arg |
| exclude_start_hard_regs. Setup the corresponding member of |
| lra reg info. |
| (lra_create_new_reg): Add arg exclude_start_hard_regs and pass it |
| to lra_create_new_reg_with_unique_value. |
| (initialize_lra_reg_info_element): Initialize member |
| exclude_start_hard_regs. |
| (get_scratch_reg): Pass NULL to lra_create_new_reg. |
| * ira.cc (setup_prohibited_class_mode_regs): Rename to |
| setup_prohibited_and_exclude_class_mode_regs and calculate |
| ira_exclude_class_mode_regs. |
| |
| 2022-01-21 Martin Liska <mliska@suse.cz> |
| |
| * configure.ac: Detect ld_is_mold and use it for |
| comdat_group=yes and gcc_cv_ld_hidden=yes. |
| * configure: Regenerate. |
| |
| 2022-01-21 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/100089 |
| * tree-vect-slp.cc (vect_slp_region): Reject BB vectorization |
| of if-converted loops with unvectorized COND_EXPRs for |
| all but the unlimited cost models. |
| |
| 2022-01-21 Ard Biesheuvel <ardb@kernel.org> |
| |
| * config/arm/arm-opts.h (enum stack_protector_guard): New. |
| * config/arm/arm-protos.h (arm_stack_protect_tls_canary_mem): |
| New. |
| * config/arm/arm.cc (TARGET_STACK_PROTECT_GUARD): Define. |
| (arm_option_override_internal): Handle and put in error checks. |
| for stack protector guard options. |
| (arm_option_reconfigure_globals): Likewise. |
| (arm_stack_protect_tls_canary_mem): New. |
| (arm_stack_protect_guard): New. |
| * config/arm/arm.md (stack_protect_set): New. |
| (stack_protect_set_tls): Likewise. |
| (stack_protect_test): Likewise. |
| (stack_protect_test_tls): Likewise. |
| (reload_tp_hard): Likewise. |
| * config/arm/arm.opt (-mstack-protector-guard): New |
| (-mstack-protector-guard-offset): New. |
| * doc/invoke.texi: Document new options. |
| |
| 2022-01-21 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/104156 |
| * tree-ssa-loop-unswitch.cc (tree_unswitch_outer_loop): |
| Collect and reset debug stmts with out-of-loop uses when |
| hoisting guards. |
| (find_loop_guard): Adjust. |
| (empty_bb_without_guard_p): Likewise. Ignore debug stmts. |
| (used_outside_loop_p): Push debug uses to a vector of |
| debug stmts to reset. |
| (hoist_guard): Adjust -fopt-info category. |
| |
| 2022-01-21 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/104152 |
| * tree-vect-slp.cc (vect_build_slp_tree_2): Add missing |
| can_duplicate_and_interleave_p check. |
| |
| 2022-01-21 Jakub Jelinek <jakub@redhat.com> |
| |
| * gimple-ssa-warn-access.cc (pass_waccess::warn_invalid_pointer): |
| Avoid passing var to warning_at when the format string doesn't |
| refer to it. |
| |
| 2022-01-21 Aldy Hernandez <aldyh@redhat.com> |
| |
| PR tree-optimization/103721 |
| * gimple-range-path.cc |
| (path_range_query::relations_may_be_invalidated): New. |
| (path_range_query::compute_ranges_in_block): Reset relations if |
| they may be invalidated. |
| (path_range_query::maybe_register_phi_relation): Exit if relations |
| may be invalidated on incoming edge. |
| (path_range_query::compute_phi_relations): Pass incoming PHI edge |
| to maybe_register_phi_relation. |
| * gimple-range-path.h (relations_may_be_invalidated): New. |
| (maybe_register_phi_relation): Pass edge instead of tree. |
| * tree-ssa-threadbackward.cc (back_threader::back_threader): |
| Mark DFS edges. |
| * value-relation.cc (path_oracle::path_oracle): Call |
| mark_dfs_back_edges. |
| (path_oracle::register_relation): Add SSA names to m_registered |
| bitmap. |
| (path_oracle::reset_path): Clear m_registered bitmap. |
| * value-relation.h (path_oracle::set_root_oracle): New. |
| |
| 2022-01-21 Jakub Jelinek <jakub@redhat.com> |
| |
| PR rtl-optimization/102478 |
| * optabs.cc (prepare_cmp_insn): If !can_create_pseudo_p (), don't |
| force_reg constants and for -fnon-call-exceptions fail if copy_to_reg |
| would be needed. |
| |
| 2022-01-20 Richard Biener <rguenther@suse.de> |
| |
| PR middle-end/100786 |
| * gimple-fold.cc (get_symbol_constant_value): Only return |
| values of compatible type to the symbol. |
| |
| 2022-01-20 Andrew MacLeod <amacleod@redhat.com> |
| |
| * value-relation.cc (relation_oracle::valid_equivs): Query and add |
| if valid members of a set. |
| (equiv_oracle::register_equiv): Call valid_equivs rather than |
| bitmap direct operations. |
| (path_oracle::register_equiv): Ditto. |
| * value-relation.h (relation_oracle::valid_equivs): New prototype. |
| |
| 2022-01-20 Richard Biener <rguenther@suse.de> |
| |
| PR target/100784 |
| * config/i386/i386.cc (ix86_gimple_fold_builtin): Check for |
| LHS before folding __builtin_ia32_shufpd and friends. |
| |
| 2022-01-20 Richard Earnshaw <rearnsha@arm.com> |
| |
| * config/arm/crypto.md (aes_op_protect): Allow moves from core |
| registers and from memory. |
| (aes_op_protect_misalign_load): New pattern. |
| (aes_op_protect_neon_vld1v16qi): New pattern. |
| |
| 2022-01-20 Richard Earnshaw <rearnsha@arm.com> |
| |
| * config/arm/crypto.md (crypto_<CRYPTO_AESMC:crypto_pattern>_protected): |
| New pattern. |
| (aarch32_crypto_aese_fused_protected): Likewise. |
| (aarch32_crypto_aesd_fused_protected): Likewise. |
| |
| 2022-01-20 Richard Earnshaw <rearnsha@arm.com> |
| |
| * config/arm/crypto.md (crypto_<CRYPTO_AES:crypto_pattern>): Convert |
| to define_expand. Add mitigation for the Cortex-A AES erratum |
| when enabled. |
| (*crypto_<CRYPTO_AES:crypto_pattern>_insn): New pattern, based |
| on original crypto_<CRYPTO_AES:crypto_pattern> insn. |
| (aes_op_protect): New pattern. |
| * config/arm/unspecs.md (unspec): Add UNSPEC_AES_PROTECT. |
| |
| 2022-01-20 Richard Earnshaw <rearnsha@arm.com> |
| |
| * config/arm/arm-cpus.in (quirk_aes_1742098): New quirk feature |
| (ALL_QUIRKS): Add it. |
| (cortex-a57, cortex-a72): Enable it. |
| (cortex-a57.cortex-a53, cortex-a72.cortex-a53): Likewise. |
| * config/arm/arm.opt (mfix-cortex-a57-aes-1742098): New command-line |
| option. |
| (mfix-cortex-a72-aes-1655431): New option alias. |
| * config/arm/arm.cc (arm_option_override): Handle default settings |
| for AES erratum switch. |
| * doc/invoke.texi (Arm Options): Document new options. |
| |
| 2022-01-20 Richard Earnshaw <rearnsha@arm.com> |
| |
| * config/arm/crypto.md (crypto_<CYRPTO_AES:crypto_pattern>): Use |
| <crypto_mode> rather than hard-coding the mode. |
| (crypto_<CRYPTO_AESMC:crypto_pattern>): Fix white space. |
| (crypto_<CRYPTO_AES:crypto_pattern>): Likewise. |
| (*aarch32_crypto_aese_fused): Likewise. |
| (*aarch32_crypto_aesd_fused): Likewise. |
| (crypto_<CRYPTO_BINARY:crypto_pattern>): Likewise. |
| (crypto_<CRYPTO_TERNARY:crypto_pattern>): Likewise. |
| (crypto_sha1h_lb): Likewise. |
| (crypto_vmullp64): Likewise. |
| (crypto_<CRYPTO_SELECTING:crypto_pattern>): Likewise. |
| (crypto_<CRYPTO_SELECTING:crypto_pattern>_lb): Likewise. |
| |
| 2022-01-20 Richard Earnshaw <rearnsha@arm.com> |
| |
| * config/arm/crypto.md (crypto_<CRYPTO_AESMC:crypto_pattern>): Add |
| iterator to pattern name to disambiguate. |
| (crypto_<CRYPTO_AES:crypto_pattern>): Likewise. |
| (crypto_<CRYPTO_BINARY:crypto_pattern>): Likewise. |
| (crypto_<CRYPTO_TERNARY:crypto_pattern>): Likewise. |
| (crypto_<CRYPTO_SELECTING:crypto_pattern>): Likewise. |
| (crypto_<CRYPTO_SELECTING:crypto_pattern>_lb): Likewise. |
| |
| 2022-01-20 Martin Liska <mliska@suse.cz> |
| |
| PR bootstrap/104135 |
| * emit-rtl.cc (make_insn_raw): Fix -Wformat-diag warnings. |
| * rtl.cc: Partially disable -Wformat-diag for RTL checking |
| error messages. |
| |
| 2022-01-20 Jakub Jelinek <jakub@redhat.com> |
| |
| PR debug/103874 |
| * dwarf2out.cc (index_rnglists): For !HAVE_AS_LEB128 and |
| block_num > 0, index entry even if !have_multiple_function_sections. |
| |
| 2022-01-20 liuhongt <hongtao.liu@intel.com> |
| |
| PR target/103771 |
| * tree-vect-stmts.cc (supportable_narrowing_operation): Enhance |
| integral mode mask pack by multi steps which takes |
| vec_pack_sbool_trunc_optab as start when elements number is |
| less than BITS_PER_UNITS. |
| |
| 2022-01-20 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/104114 |
| * tree-vect-generic.cc (expand_vector_piecewise): Do not diagnose |
| single element vector decomposition. |
| |
| 2022-01-19 Robin Dapp <rdapp@linux.ibm.com> |
| |
| * ifcvt.cc (noce_convert_multiple_sets_1): New function. |
| (noce_convert_multiple_sets): Call function a second time if we can |
| improve the first try. |
| |
| 2022-01-19 Robin Dapp <rdapp@linux.ibm.com> |
| |
| * ifcvt.cc (cond_exec_get_condition): New parameter to allow getting the |
| reversed comparison. |
| (try_emit_cmove_seq): New function to facilitate creating a cmov |
| sequence. |
| (noce_convert_multiple_sets): Create two sequences and use the less |
| expensive one. |
| |
| 2022-01-19 Robin Dapp <rdapp@linux.ibm.com> |
| |
| * rtl.h (struct rtx_comparison): New struct that holds an rtx |
| comparison. |
| * config/rs6000/rs6000.cc (rs6000_emit_minmax): Use struct instead of |
| single parameters. |
| (rs6000_emit_swsqrt): Likewise. |
| * expmed.cc (expand_sdiv_pow2): Likewise. |
| (emit_store_flag): Likewise. |
| * expr.cc (expand_cond_expr_using_cmove): Likewise. |
| (expand_expr_real_2): Likewise. |
| * ifcvt.cc (noce_emit_cmove): Add compare and reversed compare |
| parameters. |
| * optabs.cc (emit_conditional_move_1): New function. |
| (expand_doubleword_shift_condmove): Use struct. |
| (emit_conditional_move): Use struct and allow to call directly |
| without going through preparation steps. |
| * optabs.h (emit_conditional_move): Use struct. |
| |
| 2022-01-19 Robin Dapp <rdapp@linux.ibm.com> |
| |
| * ifcvt.cc (bb_ok_for_noce_convert_multiple_sets): Estimate insns costs. |
| (noce_process_if_block): Use potential costs. |
| |
| 2022-01-19 Robin Dapp <rdapp@linux.ibm.com> |
| |
| * ifcvt.cc (noce_convert_multiple_sets): Allow constants. |
| (bb_ok_for_noce_convert_multiple_sets): Likewise. |
| |
| 2022-01-19 Robin Dapp <rdapp@linux.ibm.com> |
| |
| * ifcvt.cc (need_cmov_or_rewire): New function. |
| (noce_convert_multiple_sets): Call it. |
| |
| 2022-01-19 David Malcolm <dmalcolm@redhat.com> |
| |
| * attribs.cc (attribute_c_tests): Rename to... |
| (attribs_cc_tests): ...this. |
| * bitmap.cc (bitmap_c_tests): Rename to... |
| (bitmap_cc_tests): ...this. |
| * cgraph.cc (cgraph_c_finalize): Rename to... |
| (cgraph_cc_finalize): ...this. |
| (cgraph_c_tests): Rename to... |
| (cgraph_cc_tests): ...this. |
| * cgraph.h (cgraph_c_finalize): Rename to... |
| (cgraph_cc_finalize): ...this. |
| (cgraphunit_c_finalize): Rename to... |
| (cgraphunit_cc_finalize): ...this. |
| * cgraphunit.cc (cgraphunit_c_finalize): Rename to... |
| (cgraphunit_cc_finalize): ...this. |
| * convert.cc (convert_c_tests): Rename to... |
| (convert_cc_tests): ...this. |
| * dbgcnt.cc (dbgcnt_c_tests): Rename to... |
| (dbgcnt_cc_tests): ...this. |
| * diagnostic-show-locus.cc (diagnostic_show_locus_c_tests): Rename to... |
| (diagnostic_show_locus_cc_tests): ...this. |
| * diagnostic.cc (diagnostic_c_tests): Rename to... |
| (diagnostic_cc_tests): ...this. |
| * dumpfile.cc (dumpfile_c_tests): Rename to... |
| (dumpfile_cc_tests): ...this. |
| * dwarf2out.cc (dwarf2out_c_finalize): Rename to... |
| (dwarf2out_cc_finalize): ...this. |
| * dwarf2out.h (dwarf2out_c_finalize): Rename to... |
| (dwarf2out_cc_finalize): ...this. |
| * edit-context.cc (edit_context_c_tests): Rename to... |
| (edit_context_cc_tests): ...this. |
| * et-forest.cc (et_forest_c_tests): Rename to... |
| (et_forest_cc_tests): ...this. |
| * fibonacci_heap.cc (fibonacci_heap_c_tests): Rename to... |
| (fibonacci_heap_cc_tests): ...this. |
| * fold-const.cc (fold_const_c_tests): Rename to... |
| (fold_const_cc_tests): ...this. |
| * function-tests.cc (function_tests_c_tests): Rename to... |
| (function_tests_cc_tests): ...this. |
| * gcse.cc (gcse_c_finalize): Rename to... |
| (gcse_cc_finalize): ...this. |
| * gcse.h (gcse_c_finalize): Rename to... |
| (gcse_cc_finalize): ...this. |
| * ggc-tests.cc (ggc_tests_c_tests): Rename to... |
| (ggc_tests_cc_tests): ...this. |
| * gimple-ssa-store-merging.cc (store_merging_c_tests): Rename to... |
| (store_merging_cc_tests): ...this. |
| * gimple.cc (gimple_c_tests): Rename to... |
| (gimple_cc_tests): ...this. |
| * hash-map-tests.cc (hash_map_tests_c_tests): Rename to... |
| (hash_map_tests_cc_tests): ...this. |
| * hash-set-tests.cc (hash_set_tests_c_tests): Rename to... |
| (hash_set_tests_cc_tests): ...this. |
| * input.cc (input_c_tests): Rename to... |
| (input_cc_tests): ...this. |
| * ipa-cp.cc (ipa_cp_c_finalize): Rename to... |
| (ipa_cp_cc_finalize): ...this. |
| * ipa-fnsummary.cc (ipa_fnsummary_c_finalize): Rename to... |
| (ipa_fnsummary_cc_finalize): ...this. |
| * ipa-fnsummary.h (ipa_fnsummary_c_finalize): Rename to... |
| (ipa_fnsummary_cc_finalize): ...this. |
| * ipa-modref-tree.cc (ipa_modref_tree_c_tests): Rename to... |
| (ipa_modref_tree_cc_tests): ...this. |
| * ipa-modref-tree.h (modref_c_tests): Delete bogus decl. |
| * ipa-modref.cc (ipa_modref_c_finalize): Rename to... |
| (ipa_modref_cc_finalize): ...this. |
| * ipa-modref.h (ipa_modref_c_finalize): Rename to... |
| (ipa_modref_cc_finalize): ...this. |
| * ipa-prop.h (ipa_cp_c_finalize): Rename to... |
| (ipa_cp_cc_finalize): ...this. |
| * ipa-reference.cc (ipa_reference_c_finalize): Rename to... |
| (ipa_reference_cc_finalize): ...this. |
| * ipa-reference.h (ipa_reference_c_finalize): Rename to... |
| (ipa_reference_cc_finalize): ...this. |
| * ira-costs.cc (ira_costs_c_finalize): Rename to... |
| (ira_costs_cc_finalize): ...this. |
| * ira.h (ira_costs_c_finalize): Rename to... |
| (ira_costs_cc_finalize): ...this. |
| * opt-suggestions.cc (opt_proposer_c_tests): Rename to... |
| (opt_suggestions_cc_tests): ...this. |
| * opts.cc (opts_c_tests): Rename to... |
| (opts_cc_tests): ...this. |
| * predict.cc (predict_c_tests): Rename to... |
| (predict_cc_tests): ...this. |
| * pretty-print.cc (pretty_print_c_tests): Rename to... |
| (pretty_print_cc_tests): ...this. |
| * read-rtl-function.cc (read_rtl_function_c_tests): Rename to... |
| (read_rtl_function_cc_tests): ...this. |
| * rtl-tests.cc (rtl_tests_c_tests): Rename to... |
| (rtl_tests_cc_tests): ...this. |
| * sbitmap.cc (sbitmap_c_tests): Rename to... |
| (sbitmap_cc_tests): ...this. |
| * selftest-run-tests.cc (selftest::run_tests): Update calls for |
| _c_ to _cc_ function renamings; fix names of attribs and |
| opt-suggestions tests. |
| * selftest.cc (selftest_c_tests): Rename to... |
| (selftest_cc_tests): ...this. |
| * selftest.h (attribute_c_tests): Rename to... |
| (attribs_cc_tests): ...this. |
| (bitmap_c_tests): Rename to... |
| (bitmap_cc_tests): ...this. |
| (cgraph_c_tests): Rename to... |
| (cgraph_cc_tests): ...this. |
| (convert_c_tests): Rename to... |
| (convert_cc_tests): ...this. |
| (diagnostic_c_tests): Rename to... |
| (diagnostic_cc_tests): ...this. |
| (diagnostic_show_locus_c_tests): Rename to... |
| (diagnostic_show_locus_cc_tests): ...this. |
| (dumpfile_c_tests): Rename to... |
| (dumpfile_cc_tests): ...this. |
| (edit_context_c_tests): Rename to... |
| (edit_context_cc_tests): ...this. |
| (et_forest_c_tests): Rename to... |
| (et_forest_cc_tests): ...this. |
| (fibonacci_heap_c_tests): Rename to... |
| (fibonacci_heap_cc_tests): ...this. |
| (fold_const_c_tests): Rename to... |
| (fold_const_cc_tests): ...this. |
| (function_tests_c_tests): Rename to... |
| (function_tests_cc_tests): ...this. |
| (ggc_tests_c_tests): Rename to... |
| (ggc_tests_cc_tests): ...this. |
| (gimple_c_tests): Rename to... |
| (gimple_cc_tests): ...this. |
| (hash_map_tests_c_tests): Rename to... |
| (hash_map_tests_cc_tests): ...this. |
| (hash_set_tests_c_tests): Rename to... |
| (hash_set_tests_cc_tests): ...this. |
| (input_c_tests): Rename to... |
| (input_cc_tests): ...this. |
| (opts_c_tests): Rename to... |
| (opts_cc_tests): ...this. |
| (predict_c_tests): Rename to... |
| (predict_cc_tests): ...this. |
| (pretty_print_c_tests): Rename to... |
| (pretty_print_cc_tests): ...this. |
| (read_rtl_function_c_tests): Rename to... |
| (read_rtl_function_cc_tests): ...this. |
| (rtl_tests_c_tests): Rename to... |
| (rtl_tests_cc_tests): ...this. |
| (sbitmap_c_tests): Rename to... |
| (sbitmap_cc_tests): ...this. |
| (selftest_c_tests): Rename to... |
| (selftest_cc_tests): ...this. |
| (simplify_rtx_c_tests): Rename to... |
| (simplify_rtx_cc_tests): ...this. |
| (spellcheck_c_tests): Rename to... |
| (spellcheck_cc_tests): ...this. |
| (spellcheck_tree_c_tests): Rename to... |
| (spellcheck_tree_cc_tests): ...this. |
| (sreal_c_tests): Rename to... |
| (sreal_cc_tests): ...this. |
| (store_merging_c_tests): Rename to... |
| (store_merging_cc_tests): ...this. |
| (tree_c_tests): Rename to... |
| (tree_cc_tests): ...this. |
| (tree_cfg_c_tests): Rename to... |
| (tree_cfg_cc_tests): ...this. |
| (typed_splay_tree_c_tests): Rename to... |
| (typed_splay_tree_cc_tests): ...this. |
| (vec_c_tests): Rename to... |
| (vec_cc_tests): ...this. |
| (vec_perm_indices_c_tests): Rename to... |
| (vec_perm_indices_cc_tests): ..this. |
| (opt_proposer_c_tests): Rename to... |
| (opt_suggestions_cc_tests): ...this. |
| (dbgcnt_c_tests): Rename to... |
| (dbgcnt_cc_tests): ...this. |
| (ipa_modref_tree_c_tests): Rename to... |
| (ipa_modref_tree_cc_tests): ...this. |
| * simplify-rtx.cc (simplify_rtx_c_tests): Rename to... |
| (simplify_rtx_cc_tests): ...this. |
| * spellcheck-tree.cc (spellcheck_tree_c_tests): Rename to... |
| (spellcheck_tree_cc_tests): ...this. |
| * spellcheck.cc (spellcheck_c_tests): Rename to... |
| (spellcheck_cc_tests): ...this. |
| * sreal.cc (sreal_c_tests): Rename to... |
| (sreal_cc_tests): ...this. |
| * toplev.cc (toplev::finalize): Update calls for _c_ to _cc_ |
| function renamings. |
| * tree-cfg.cc (tree_cfg_c_tests): Rename to... |
| (tree_cfg_cc_tests): ...this. |
| * tree.cc (tree_c_tests): Rename to... |
| (tree_cc_tests): ...this. |
| * typed-splay-tree.cc (typed_splay_tree_c_tests): Rename to... |
| (typed_splay_tree_cc_tests): ...this. |
| * vec-perm-indices.cc (vec_perm_indices_c_tests): Rename to... |
| (vec_perm_indices_cc_tests): ...this. |
| * vec.cc (vec_c_tests): Rename to... |
| (vec_cc_tests): ...this. |
| |
| 2022-01-19 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| PR tree-optimization/103997 |
| * tree-vect-loop.cc (vect_analyze_loop): Fix mode skipping for epilogue |
| vectorization. |
| |
| 2022-01-19 Jakub Jelinek <jakub@redhat.com> |
| |
| PR middle-end/102860 |
| * match.pd (x %[fl] y -> x % y): New simplification for |
| unsigned integral types. |
| * optabs-tree.cc (optab_for_tree_code): Return unknown_optab |
| for {CEIL,FLOOR,ROUND}_{DIV,MOD}_EXPR with VECTOR_TYPE. |
| |
| 2022-01-19 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/104112 |
| * tree-vect-loop.cc (vect_find_reusable_accumulator): Check |
| for required intermediate vector types. |
| |
| 2022-01-19 Jakub Jelinek <jakub@redhat.com> |
| |
| * config/rs6000/rs6000.cc (rs6000_machine_from_flags): Add default:. |
| |
| 2022-01-19 Martin Liska <mliska@suse.cz> |
| |
| * configure.ac: Remove -Wno-error=format-diag. |
| * configure: Regenerate. |
| |
| 2022-01-19 Martin Liska <mliska@suse.cz> |
| |
| * config/riscv/riscv.cc (riscv_handle_type_attribute): |
| Update one -Wformat-diag string in warning message. |
| |
| 2022-01-19 Jakub Jelinek <jakub@redhat.com> |
| |
| PR middle-end/104103 |
| * gimple-ssa-warn-access.cc (pass_waccess::check_call): Don't check |
| .ASAN_MARK calls. |
| |
| 2022-01-19 Jakub Jelinek <jakub@redhat.com> |
| |
| PR c++/89074 |
| * fold-const.cc (address_compare): Consider different STRING_CSTs |
| with the same lengths that memcmp the same as equal, not different. |
| |
| 2022-01-19 Jakub Jelinek <jakub@redhat.com> |
| |
| * config/i386/sse.md (*aes<aeswideklvariant>u*): Use %0 instead of |
| {%0}. |
| |
| 2022-01-19 Martin Liska <mliska@suse.cz> |
| Thomas Schwinge <thomas@codesourcery.com> |
| |
| * config/nvptx/nvptx.cc (nvptx_goacc_validate_dims_1): Update |
| warning messages. |
| |
| 2022-01-19 Sebastian Huber <sebastian.huber@embedded-brains.de> |
| |
| PR target/104090 |
| * config/rs6000/rs6000.cc (rs6000_machine_from_flags): Use also |
| rs6000_cpu. |
| |
| 2022-01-19 Jakub Jelinek <jakub@redhat.com> |
| |
| PR target/104104 |
| * config/i386/sse.md |
| (<avx512>_<complexopname>_<mode><maskc_name><round_name>, |
| avx512fp16_<complexopname>sh_v8hf<mask_scalarc_name><round_scalarcz_name>, |
| avx512dq_mul<mode>3<mask_name>, <avx2_avx512>_permvar<mode><mask_name>, |
| avx2_perm<mode>_1<mask_name>, avx512f_perm<mode>_1<mask_name>, |
| avx512dq_rangep<mode><mask_name><round_saeonly_name>, |
| avx512dq_ranges<mode><mask_scalar_name><round_saeonly_scalar_name>, |
| <avx512>_getmant<mode><mask_name><round_saeonly_name>, |
| avx512f_vgetmant<mode><mask_scalar_name><round_saeonly_scalar_name>): |
| Use vxorps\t%x0, %x0, %x0 instead of vxorps\t{%x0, %x0, %x0}. |
| |
| 2022-01-19 Martin Sebor <msebor@redhat.com> |
| |
| PR middle-end/104069 |
| * gimple-ssa-warn-access.cc (pointers_related_p): Return false for |
| an unknown result as documented. |
| |
| 2022-01-18 Andrew Pinski <apinski@marvell.com> |
| |
| * ipa-split.cc (visit_bb): Fix comment before the |
| warning/error attribute checking code. |
| |
| 2022-01-18 David Faust <david.faust@oracle.com> |
| |
| * config/bpf/coreout.cc (bpf_core_reloc_add): Do not account |
| for base strtab offset yet as it may change. |
| (output_asm_btfext_core_reloc): Do so here instead. |
| (output_btfext_core_sections): Likewise. |
| |
| 2022-01-18 David Faust <david.faust@oracle.com> |
| |
| * config/bpf/coreout.cc (output_btfext_header): Account for |
| 4-byte record size in core_relo_len. |
| (output_btfext_core_sections): Only write record size once. |
| * config/bpf/coreout.h (btf_ext_section_header): Delete unused |
| member. |
| |
| 2022-01-18 Maciej W. Rozycki <macro@embecosm.com> |
| |
| * common/config/riscv/riscv-common.cc |
| (riscv_subset_list::parse_multiletter_ext): Move pointer |
| arithmetic ahead of `free'. |
| |
| 2022-01-18 Jason Merrill <jason@redhat.com> |
| |
| PR c++/104007 |
| * gimplify.cc (gimple_push_cleanup): Handle eh_only in conditional |
| context. |
| |
| 2022-01-18 Sandra Loosemore <sandra@codesourcery.com> |
| |
| PR middle-end/103163 |
| * emit-rtl.cc (init_emit_regs): Initialize stack_limit_rtx here... |
| (init_emit_once): ...not here. |
| |
| 2022-01-18 Martin Liska <mliska@suse.cz> |
| |
| * collect2.cc (scan_libraries): Fix -Wformat-diag issues. |
| * config/aarch64/aarch64-builtins.cc (aarch64_simd_expand_builtin): Likewise. |
| * config/arc/arc.md: Likewise. |
| * config/avr/avr.cc (avr_section_type_flags): Likewise. |
| * config/bfin/bfin.cc (bfin_option_override): Likewise. |
| (bfin_handle_longcall_attribute): Likewise. |
| * config/cris/cris.h (FUNCTION_PROFILER): Likewise. |
| * config/frv/frv.cc (frv_expand_builtin): Likewise. |
| * config/ia64/ia64-c.cc (ia64_hpux_handle_builtin_pragma): Likewise. |
| * config/iq2000/iq2000.cc (save_restore_insns): Likewise. |
| (iq2000_print_operand_address): Likewise. |
| (iq2000_print_operand): Likewise. |
| * config/m32c/m32c-pragma.cc (m32c_pragma_memregs): Likewise. |
| (m32c_pragma_address): Likewise. |
| * config/m68k/m68k.cc (m68k_handle_fndecl_attribute): Likewise. |
| * config/mips/mips.cc (mips_handle_interrupt_attr): Likewise. |
| (mips_set_compression_mode): Likewise. |
| * config/mmix/mmix.cc (mmix_function_profiler): Likewise. |
| (mmix_print_operand): Likewise. |
| (mmix_output_shiftvalue_op_from_str): Likewise. |
| (mmix_output_shifted_value): Likewise. |
| * config/msp430/driver-msp430.cc (msp430_select_hwmult_lib): Likewise. |
| * config/msp430/msp430.cc (msp430_option_override): Likewise. |
| (msp430_attr): Likewise. |
| (msp430_expand_delay_cycles): Likewise. |
| (msp430_expand_builtin): Likewise. |
| * config/rs6000/aix73.h: Likewise. |
| * config/rs6000/rtems.h (INVALID_64BIT): Likewise. |
| * config/rx/rx.cc (rx_expand_builtin_mvtc): Likewise. |
| (valid_psw_flag): Likewise. |
| * config/sh/sh.cc (parse_validate_atomic_model_option): Likewise. |
| * config/stormy16/stormy16.cc (xstormy16_function_profiler): Likewise. |
| (xstormy16_expand_builtin_va_start): Likewise. |
| (xstormy16_handle_below100_attribute): Likewise. |
| |
| 2022-01-18 Martin Liska <mliska@suse.cz> |
| |
| * config/vms/vms-c.cc (vms_pragma_nostandard): Fix -Wformat-diag |
| warning. |
| (vms_pragma_standard): Likewise. |
| (vms_pragma_extern_prefix): Likewise. |
| |
| 2022-01-18 Martin Liska <mliska@suse.cz> |
| |
| * config/xtensa/xtensa.cc (print_operand): Fix warnings. |
| (print_operand_address): Likewise. |
| (xtensa_multibss_section_type_flags): Likewise. |
| |
| 2022-01-18 Martin Liska <mliska@suse.cz> |
| |
| * config/rs6000/rs6000-call.cc (rs6000_invalid_builtin): Change |
| wording of an error message. |
| |
| 2022-01-18 Martin Liska <mliska@suse.cz> |
| |
| * config/v850/v850-c.cc (pop_data_area): Fix -Wformat-diag |
| warning. |
| (ghs_pragma_section): Likewise. |
| (ghs_pragma_interrupt): Likewise. |
| (ghs_pragma_starttda): Likewise. |
| (ghs_pragma_startsda): Likewise. |
| (ghs_pragma_startzda): Likewise. |
| (ghs_pragma_endtda): Likewise. |
| (ghs_pragma_endsda): Likewise. |
| (ghs_pragma_endzda): Likewise. |
| |
| 2022-01-18 Martin Liska <mliska@suse.cz> |
| |
| * config/nds32/nds32-intrinsic.cc (nds32_expand_builtin_impl): |
| Fix warnings. |
| * config/nds32/nds32-intrinsic.md: Likewise. |
| * config/nds32/nds32-isr.cc (nds32_check_isr_attrs_conflict): Likewise. |
| * config/nds32/nds32.cc (nds32_print_operand): Likewise. |
| (nds32_insert_attributes): Likewise. |
| |
| 2022-01-18 Martin Liska <mliska@suse.cz> |
| |
| * config/nvptx/nvptx.cc (nvptx_goacc_validate_dims_1): Wrap |
| keyword. |
| * config/nvptx/nvptx.md: Remove trailing dot. |
| |
| 2022-01-18 Martin Liska <mliska@suse.cz> |
| |
| * common/config/riscv/riscv-common.cc (riscv_subset_list::add): |
| Wrap keywords with quotes and remove trailing dots. |
| (riscv_subset_list::parsing_subset_version): Likewise. |
| (riscv_subset_list::parse_std_ext): Likewise. |
| (riscv_subset_list::parse_multiletter_ext): Likewise. |
| * config/riscv/riscv.cc (riscv_handle_type_attribute): Likewise. |
| |
| 2022-01-18 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * tree-vect-loop.cc (vect_estimate_min_profitable_iters): Pass new |
| argument suggested_unroll_factor. |
| (vect_analyze_loop_costing): Likewise. |
| (_loop_vec_info::_loop_vec_info): Initialize new member |
| suggested_unroll_factor. |
| (vect_determine_partial_vectors_and_peeling): Make epilogue of unrolled |
| main loop use partial vectors. |
| (vect_analyze_loop_2): Pass and use new argument |
| suggested_unroll_factor. |
| (vect_analyze_loop_1): Change to intialize local |
| suggested_unroll_factor and use it. |
| (vectorizable_reduction): Don't use single_defuse_cycle when unrolling. |
| * tree-vectorizer.h (_loop_vec_info::_loop_vec_info): Add new member |
| suggested_unroll_factor. |
| (vector_costs::vector_costs): Add new member m_suggested_unroll_factor. |
| (vector_costs::suggested_unroll_factor): New getter function. |
| (finish_cost): Set return argument suggested_unroll_factor. |
| |
| 2022-01-18 Andrew MacLeod <amacleod@redhat.com> |
| |
| PR tree-optimization/104038 |
| * doc/invoke.texi (relation-block-limit): New. |
| * params.opt (relation-block-limit): New. |
| * value-relation.cc (dom_oracle::register_relation): Check for NULL |
| record before invoking transitive registery. |
| (dom_oracle::set_one_relation): Check limit before creating record. |
| (dom_oracle::register_transitives): Stop when no record created. |
| * value-relation.h (relation_chain_head::m_num_relations): New. |
| |
| 2022-01-18 Richard Biener <rguenther@suse.de> |
| |
| PR ipa/103989 |
| * ipa-inline.cc (inline_small_functions): Do not enqueue call |
| edges originating in functions compiled with -Og. |
| |
| 2022-01-18 Richard Biener <rguenther@suse.de> |
| |
| PR ipa/103989 |
| * passes.def (pass_all_optimizations_g): Remove pass_modref |
| and pass_local_pure_const. |
| |
| 2022-01-18 Martin Liska <mliska@suse.cz> |
| |
| * config/s390/s390.cc: Fix -Wformat-diag warnings. |
| |
| 2022-01-18 Martin Liska <mliska@suse.cz> |
| |
| * config/s390/s390-c.cc (s390_expand_overloaded_builtin): Wrap |
| keyword in quotes. |
| (s390_resolve_overloaded_builtin): Remove trailing dot. |
| * config/s390/s390.cc (s390_const_operand_ok): Use - for range. |
| (s390_expand_builtin): Remove trailing dot. |
| (s390_emit_prologue): Likewise, use semicolon. |
| (s390_option_override_internal): Update keyword. |
| * varasm.cc (do_assemble_alias): Wrap keyword in quotes. |
| |
| 2022-01-18 Martin Liska <mliska@suse.cz> |
| |
| * config/rs6000/rs6000-call.cc (rs6000_expand_builtin): Wrap |
| keywords and use %qs instead of %<%s%>. |
| |
| 2022-01-18 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/103987 |
| * tree-ssa-dse.cc (dse_optimize_call): Properly guard modref |
| query with a pointer check. |
| |
| 2022-01-18 Richard Sandiford <richard.sandiford@arm.com> |
| |
| PR target/104005 |
| * config/aarch64/aarch64.cc (aarch64_check_consecutive_mems): |
| When using MEM_EXPR, require the base to be a decl. |
| |
| 2022-01-18 Richard Biener <rguenther@suse.de> |
| |
| * cgraph.h (struct cgraph_simd_clone_arg): Re-arrange fields to |
| avoid padding. |
| * function.h (struct function): Likewise. |
| |
| 2022-01-18 Arnaud Charlet <charlet@adacore.com> |
| |
| * doc/install.texi: Update prerequisites for GNAT |
| |
| 2022-01-18 Andrew Pinski <apinski@marvell.com> |
| |
| PR tree-optimization/101941 |
| * ipa-split.cc (visit_bb): Disallow function calls where |
| the function has either error or warning attribute. |
| |
| 2022-01-18 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/104064 |
| * tree-vect-data-refs.cc (vect_analyze_data_ref_accesses): Check |
| DR_INIT fits in a signed HWI, represent the difference from the |
| first DR in unsigned. |
| |
| 2022-01-17 Martin Liska <mliska@suse.cz> |
| |
| * Makefile.in: Rename .c names to .cc. |
| * config.gcc: Likewise. |
| * configure: Regenerate. Likewise. |
| * configure.ac: Likewise. |
| * gengtype.cc (set_gc_used): Likewise. |
| (source_dot_c_frul): Likewise. |
| (source_dot_cc_frul): Likewise. |
| (struct file_rule_st): Likewise. |
| (close_output_files): Likewise. |
| * config/avr/t-avr: Use CXXFLAGS_* and CXX_FOR_BUILD. |
| |
| 2022-01-17 Martin Liska <mliska@suse.cz> |
| |
| * Makefile.in: Rename .c names to .cc. |
| * alias.h: Likewise. |
| * asan.cc: Likewise. |
| * auto-profile.h: Likewise. |
| * basic-block.h (struct basic_block_d): Likewise. |
| * btfout.cc: Likewise. |
| * builtins.cc (expand_builtin_longjmp): Likewise. |
| (validate_arg): Likewise. |
| (access_ref::offset_bounded): Likewise. |
| * caller-save.cc (reg_restore_code): Likewise. |
| (setup_save_areas): Likewise. |
| * calls.cc (initialize_argument_information): Likewise. |
| (expand_call): Likewise. |
| (emit_library_call_value_1): Likewise. |
| * cfg-flags.def (RTL): Likewise. |
| (SIBCALL): Likewise. |
| (CAN_FALLTHRU): Likewise. |
| * cfganal.cc (post_order_compute): Likewise. |
| * cfgcleanup.cc (try_simplify_condjump): Likewise. |
| (merge_blocks_move_predecessor_nojumps): Likewise. |
| (merge_blocks_move_successor_nojumps): Likewise. |
| (merge_blocks_move): Likewise. |
| (old_insns_match_p): Likewise. |
| (try_crossjump_bb): Likewise. |
| * cfgexpand.cc (expand_gimple_stmt): Likewise. |
| * cfghooks.cc (split_block_before_cond_jump): Likewise. |
| (profile_record_check_consistency): Likewise. |
| * cfghooks.h: Likewise. |
| * cfgrtl.cc (pass_free_cfg::execute): Likewise. |
| (rtl_can_merge_blocks): Likewise. |
| (try_redirect_by_replacing_jump): Likewise. |
| (make_pass_outof_cfg_layout_mode): Likewise. |
| (cfg_layout_can_merge_blocks_p): Likewise. |
| * cgraph.cc (release_function_body): Likewise. |
| (cgraph_node::get_fun): Likewise. |
| * cgraph.h (struct cgraph_node): Likewise. |
| (asmname_hasher::equal): Likewise. |
| (cgraph_inline_failed_type): Likewise. |
| (thunk_adjust): Likewise. |
| (dump_callgraph_transformation): Likewise. |
| (record_references_in_initializer): Likewise. |
| (ipa_discover_variable_flags): Likewise. |
| * cgraphclones.cc (GTY): Likewise. |
| * cgraphunit.cc (symbol_table::finalize_compilation_unit): Likewise. |
| * collect-utils.h (GCC_COLLECT_UTILS_H): Likewise. |
| * collect2-aix.h (GCC_COLLECT2_AIX_H): Likewise. |
| * collect2.cc (maybe_run_lto_and_relink): Likewise. |
| * combine-stack-adj.cc: Likewise. |
| * combine.cc (setup_incoming_promotions): Likewise. |
| (combine_simplify_rtx): Likewise. |
| (count_rtxs): Likewise. |
| * common.opt: Likewise. |
| * common/config/aarch64/aarch64-common.cc: Likewise. |
| * common/config/arm/arm-common.cc (arm_asm_auto_mfpu): Likewise. |
| * common/config/avr/avr-common.cc: Likewise. |
| * common/config/i386/i386-isas.h (struct _isa_names_table): Likewise. |
| * conditions.h: Likewise. |
| * config.gcc: Likewise. |
| * config/aarch64/aarch64-builtins.cc (aarch64_resolve_overloaded_memtag): Likewise. |
| * config/aarch64/aarch64-protos.h (aarch64_classify_address): Likewise. |
| (aarch64_get_extension_string_for_isa_flags): Likewise. |
| * config/aarch64/aarch64-sve-builtins.cc (function_builder::add_function): Likewise. |
| * config/aarch64/aarch64.cc (aarch64_regmode_natural_size): Likewise. |
| (aarch64_sched_first_cycle_multipass_dfa_lookahead): Likewise. |
| (aarch64_option_valid_attribute_p): Likewise. |
| (aarch64_short_vector_p): Likewise. |
| (aarch64_float_const_representable_p): Likewise. |
| * config/aarch64/aarch64.h (DBX_REGISTER_NUMBER): Likewise. |
| (ASM_OUTPUT_POOL_EPILOGUE): Likewise. |
| (GTY): Likewise. |
| * config/aarch64/cortex-a57-fma-steering.cc: Likewise. |
| * config/aarch64/driver-aarch64.cc (contains_core_p): Likewise. |
| * config/aarch64/t-aarch64: Likewise. |
| * config/aarch64/x-aarch64: Likewise. |
| * config/aarch64/x-darwin: Likewise. |
| * config/alpha/alpha-protos.h: Likewise. |
| * config/alpha/alpha.cc (alpha_scalar_mode_supported_p): Likewise. |
| * config/alpha/alpha.h (LONG_DOUBLE_TYPE_SIZE): Likewise. |
| (enum reg_class): Likewise. |
| * config/alpha/alpha.md: Likewise. |
| * config/alpha/driver-alpha.cc (AMASK_LOCKPFTCHOK): Likewise. |
| * config/alpha/x-alpha: Likewise. |
| * config/arc/arc-protos.h (arc_eh_uses): Likewise. |
| * config/arc/arc.cc (ARC_OPT): Likewise. |
| (arc_ccfsm_advance): Likewise. |
| (arc_arg_partial_bytes): Likewise. |
| (conditionalize_nonjump): Likewise. |
| * config/arc/arc.md: Likewise. |
| * config/arc/builtins.def: Likewise. |
| * config/arc/t-arc: Likewise. |
| * config/arm/arm-c.cc (arm_resolve_overloaded_builtin): Likewise. |
| (arm_pragma_target_parse): Likewise. |
| * config/arm/arm-protos.h (save_restore_target_globals): Likewise. |
| (arm_cpu_cpp_builtins): Likewise. |
| * config/arm/arm.cc (vfp3_const_double_index): Likewise. |
| (shift_op): Likewise. |
| (thumb2_final_prescan_insn): Likewise. |
| (arm_final_prescan_insn): Likewise. |
| (arm_asm_output_labelref): Likewise. |
| (arm_small_register_classes_for_mode_p): Likewise. |
| * config/arm/arm.h: Likewise. |
| * config/arm/arm.md: Likewise. |
| * config/arm/driver-arm.cc: Likewise. |
| * config/arm/symbian.h: Likewise. |
| * config/arm/t-arm: Likewise. |
| * config/arm/thumb1.md: Likewise. |
| * config/arm/x-arm: Likewise. |
| * config/avr/avr-c.cc (avr_register_target_pragmas): Likewise. |
| * config/avr/avr-fixed.md: Likewise. |
| * config/avr/avr-log.cc (avr_log_vadump): Likewise. |
| * config/avr/avr-mcus.def: Likewise. |
| * config/avr/avr-modes.def (FRACTIONAL_INT_MODE): Likewise. |
| * config/avr/avr-passes.def (INSERT_PASS_BEFORE): Likewise. |
| * config/avr/avr-protos.h (make_avr_pass_casesi): Likewise. |
| * config/avr/avr.cc (avr_option_override): Likewise. |
| (avr_build_builtin_va_list): Likewise. |
| (avr_mode_dependent_address_p): Likewise. |
| (avr_function_arg_advance): Likewise. |
| (avr_asm_output_aligned_decl_common): Likewise. |
| * config/avr/avr.h (RETURN_ADDR_RTX): Likewise. |
| (SUPPORTS_INIT_PRIORITY): Likewise. |
| * config/avr/avr.md: Likewise. |
| * config/avr/builtins.def: Likewise. |
| * config/avr/gen-avr-mmcu-specs.cc (IN_GEN_AVR_MMCU_TEXI): Likewise. |
| * config/avr/gen-avr-mmcu-texi.cc (IN_GEN_AVR_MMCU_TEXI): Likewise. |
| (main): Likewise. |
| * config/avr/t-avr: Likewise. |
| * config/bfin/bfin.cc (frame_related_constant_load): Likewise. |
| * config/bpf/bpf-protos.h (GCC_BPF_PROTOS_H): Likewise. |
| * config/bpf/bpf.h (enum reg_class): Likewise. |
| * config/bpf/t-bpf: Likewise. |
| * config/c6x/c6x-protos.h (GCC_C6X_PROTOS_H): Likewise. |
| * config/cr16/cr16-protos.h: Likewise. |
| * config/cris/cris.cc (cris_address_cost): Likewise. |
| (cris_side_effect_mode_ok): Likewise. |
| (cris_init_machine_status): Likewise. |
| (cris_emit_movem_store): Likewise. |
| * config/cris/cris.h (INDEX_REG_CLASS): Likewise. |
| (enum reg_class): Likewise. |
| (struct cum_args): Likewise. |
| * config/cris/cris.opt: Likewise. |
| * config/cris/sync.md: Likewise. |
| * config/csky/csky.cc (csky_expand_prologue): Likewise. |
| * config/darwin-c.cc: Likewise. |
| * config/darwin-f.cc: Likewise. |
| * config/darwin-sections.def (zobj_const_section): Likewise. |
| * config/darwin.cc (output_objc_section_asm_op): Likewise. |
| (fprintf): Likewise. |
| * config/darwin.h (GTY): Likewise. |
| * config/elfos.h: Likewise. |
| * config/epiphany/epiphany-sched.md: Likewise. |
| * config/epiphany/epiphany.cc (epiphany_function_value): Likewise. |
| * config/epiphany/epiphany.h (GTY): Likewise. |
| (NO_FUNCTION_CSE): Likewise. |
| * config/epiphany/mode-switch-use.cc: Likewise. |
| * config/epiphany/predicates.md: Likewise. |
| * config/epiphany/t-epiphany: Likewise. |
| * config/fr30/fr30-protos.h: Likewise. |
| * config/frv/frv-protos.h: Likewise. |
| * config/frv/frv.cc (TLS_BIAS): Likewise. |
| * config/frv/frv.h (ASM_OUTPUT_ALIGNED_LOCAL): Likewise. |
| * config/ft32/ft32-protos.h: Likewise. |
| * config/gcn/gcn-hsa.h (ASM_APP_OFF): Likewise. |
| * config/gcn/gcn.cc (gcn_init_libfuncs): Likewise. |
| * config/gcn/mkoffload.cc (copy_early_debug_info): Likewise. |
| * config/gcn/t-gcn-hsa: Likewise. |
| * config/gcn/t-omp-device: Likewise. |
| * config/h8300/h8300-protos.h (GCC_H8300_PROTOS_H): Likewise. |
| (same_cmp_following_p): Likewise. |
| * config/h8300/h8300.cc (F): Likewise. |
| * config/h8300/h8300.h (struct cum_arg): Likewise. |
| (BRANCH_COST): Likewise. |
| * config/i386/cygming.h (DEFAULT_PCC_STRUCT_RETURN): Likewise. |
| * config/i386/djgpp.h (TARGET_ASM_LTO_END): Likewise. |
| * config/i386/dragonfly.h (NO_PROFILE_COUNTERS): Likewise. |
| * config/i386/driver-i386.cc (detect_caches_intel): Likewise. |
| * config/i386/freebsd.h (NO_PROFILE_COUNTERS): Likewise. |
| * config/i386/i386-c.cc (ix86_target_macros): Likewise. |
| * config/i386/i386-expand.cc (get_mode_wider_vector): Likewise. |
| * config/i386/i386-options.cc (ix86_set_func_type): Likewise. |
| * config/i386/i386-protos.h (ix86_extract_perm_from_pool_constant): Likewise. |
| (ix86_register_pragmas): Likewise. |
| (ix86_d_has_stdcall_convention): Likewise. |
| (i386_pe_seh_init_sections): Likewise. |
| * config/i386/i386.cc (ix86_function_arg_regno_p): Likewise. |
| (ix86_function_value_regno_p): Likewise. |
| (ix86_compute_frame_layout): Likewise. |
| (legitimize_pe_coff_symbol): Likewise. |
| (output_pic_addr_const): Likewise. |
| * config/i386/i386.h (defined): Likewise. |
| (host_detect_local_cpu): Likewise. |
| (CONSTANT_ADDRESS_P): Likewise. |
| (DEFAULT_LARGE_SECTION_THRESHOLD): Likewise. |
| (struct machine_frame_state): Likewise. |
| * config/i386/i386.md: Likewise. |
| * config/i386/lynx.h (ASM_OUTPUT_ALIGN): Likewise. |
| * config/i386/mmx.md: Likewise. |
| * config/i386/sse.md: Likewise. |
| * config/i386/t-cygming: Likewise. |
| * config/i386/t-djgpp: Likewise. |
| * config/i386/t-gnu-property: Likewise. |
| * config/i386/t-i386: Likewise. |
| * config/i386/t-intelmic: Likewise. |
| * config/i386/t-omp-device: Likewise. |
| * config/i386/winnt-cxx.cc (i386_pe_type_dllimport_p): Likewise. |
| (i386_pe_adjust_class_at_definition): Likewise. |
| * config/i386/winnt.cc (gen_stdcall_or_fastcall_suffix): Likewise. |
| (i386_pe_mangle_decl_assembler_name): Likewise. |
| (i386_pe_encode_section_info): Likewise. |
| * config/i386/x-cygwin: Likewise. |
| * config/i386/x-darwin: Likewise. |
| * config/i386/x-i386: Likewise. |
| * config/i386/x-mingw32: Likewise. |
| * config/i386/x86-tune-sched-core.cc: Likewise. |
| * config/i386/x86-tune.def: Likewise. |
| * config/i386/xm-djgpp.h (STANDARD_STARTFILE_PREFIX_1): Likewise. |
| * config/ia64/freebsd.h: Likewise. |
| * config/ia64/hpux.h (REGISTER_TARGET_PRAGMAS): Likewise. |
| * config/ia64/ia64-protos.h (ia64_except_unwind_info): Likewise. |
| * config/ia64/ia64.cc (ia64_function_value_regno_p): Likewise. |
| (ia64_secondary_reload_class): Likewise. |
| (bundling): Likewise. |
| * config/ia64/ia64.h: Likewise. |
| * config/ia64/ia64.md: Likewise. |
| * config/ia64/predicates.md: Likewise. |
| * config/ia64/sysv4.h: Likewise. |
| * config/ia64/t-ia64: Likewise. |
| * config/iq2000/iq2000.h (FUNCTION_MODE): Likewise. |
| * config/iq2000/iq2000.md: Likewise. |
| * config/linux.h (TARGET_HAS_BIONIC): Likewise. |
| (if): Likewise. |
| * config/m32c/m32c.cc (m32c_function_needs_enter): Likewise. |
| * config/m32c/m32c.h (MAX_REGS_PER_ADDRESS): Likewise. |
| * config/m32c/t-m32c: Likewise. |
| * config/m32r/m32r-protos.h: Likewise. |
| * config/m32r/m32r.cc (m32r_print_operand): Likewise. |
| * config/m32r/m32r.h: Likewise. |
| * config/m32r/m32r.md: Likewise. |
| * config/m68k/m68k-isas.def: Likewise. |
| * config/m68k/m68k-microarchs.def: Likewise. |
| * config/m68k/m68k-protos.h (strict_low_part_peephole_ok): Likewise. |
| (m68k_epilogue_uses): Likewise. |
| * config/m68k/m68k.cc (m68k_call_tls_get_addr): Likewise. |
| (m68k_sched_adjust_cost): Likewise. |
| (m68k_sched_md_init): Likewise. |
| * config/m68k/m68k.h (__transfer_from_trampoline): Likewise. |
| (enum m68k_function_kind): Likewise. |
| * config/m68k/m68k.md: Likewise. |
| * config/m68k/m68kemb.h: Likewise. |
| * config/m68k/uclinux.h (ENDFILE_SPEC): Likewise. |
| * config/mcore/mcore-protos.h: Likewise. |
| * config/mcore/mcore.cc (mcore_expand_insv): Likewise. |
| (mcore_expand_prolog): Likewise. |
| * config/mcore/mcore.h (TARGET_MCORE): Likewise. |
| * config/mcore/mcore.md: Likewise. |
| * config/microblaze/microblaze-protos.h: Likewise. |
| * config/microblaze/microblaze.cc (microblaze_legitimate_pic_operand): Likewise. |
| (microblaze_function_prologue): Likewise. |
| (microblaze_function_epilogue): Likewise. |
| (microblaze_select_section): Likewise. |
| (microblaze_asm_output_mi_thunk): Likewise. |
| (microblaze_eh_return): Likewise. |
| * config/microblaze/microblaze.h: Likewise. |
| * config/microblaze/microblaze.md: Likewise. |
| * config/microblaze/t-microblaze: Likewise. |
| * config/mips/driver-native.cc: Likewise. |
| * config/mips/loongson2ef.md: Likewise. |
| * config/mips/mips-protos.h (mips_expand_vec_cmp_expr): Likewise. |
| * config/mips/mips.cc (mips_rtx_costs): Likewise. |
| (mips_output_filename): Likewise. |
| (mips_output_function_prologue): Likewise. |
| (mips_output_function_epilogue): Likewise. |
| (mips_output_mi_thunk): Likewise. |
| * config/mips/mips.h: Likewise. |
| * config/mips/mips.md: Likewise. |
| * config/mips/t-mips: Likewise. |
| * config/mips/x-native: Likewise. |
| * config/mmix/mmix-protos.h: Likewise. |
| * config/mmix/mmix.cc (mmix_option_override): Likewise. |
| (mmix_dbx_register_number): Likewise. |
| (mmix_expand_prologue): Likewise. |
| * config/mmix/mmix.h: Likewise. |
| * config/mmix/mmix.md: Likewise. |
| * config/mmix/predicates.md: Likewise. |
| * config/mn10300/mn10300.cc (mn10300_symbolic_operand): Likewise. |
| (mn10300_legitimate_pic_operand_p): Likewise. |
| * config/mn10300/mn10300.h (enum reg_class): Likewise. |
| (NO_FUNCTION_CSE): Likewise. |
| * config/moxie/moxie-protos.h: Likewise. |
| * config/moxie/uclinux.h (TARGET_LIBC_HAS_FUNCTION): Likewise. |
| * config/msp430/msp430-devices.cc (extract_devices_dir_from_exec_prefix): Likewise. |
| * config/msp430/msp430.cc (msp430_gimplify_va_arg_expr): Likewise. |
| (msp430_incoming_return_addr_rtx): Likewise. |
| * config/msp430/msp430.h (msp430_get_linker_devices_include_path): Likewise. |
| * config/msp430/t-msp430: Likewise. |
| * config/nds32/nds32-cost.cc (nds32_rtx_costs_speed_prefer): Likewise. |
| (nds32_rtx_costs_size_prefer): Likewise. |
| (nds32_init_rtx_costs): Likewise. |
| * config/nds32/nds32-doubleword.md: Likewise. |
| * config/nds32/nds32.cc (nds32_memory_move_cost): Likewise. |
| (nds32_builtin_decl): Likewise. |
| * config/nds32/nds32.h (enum nds32_16bit_address_type): Likewise. |
| (enum nds32_isr_nested_type): Likewise. |
| (enum reg_class): Likewise. |
| * config/nds32/predicates.md: Likewise. |
| * config/nds32/t-nds32: Likewise. |
| * config/nios2/nios2.cc (nios2_pragma_target_parse): Likewise. |
| * config/nvptx/nvptx-protos.h: Likewise. |
| * config/nvptx/nvptx.cc (nvptx_goacc_expand_var_decl): Likewise. |
| * config/nvptx/nvptx.h (TARGET_CPU_CPP_BUILTINS): Likewise. |
| * config/nvptx/t-nvptx: Likewise. |
| * config/nvptx/t-omp-device: Likewise. |
| * config/pa/elf.h: Likewise. |
| * config/pa/pa-linux.h (GLOBAL_ASM_OP): Likewise. |
| * config/pa/pa-netbsd.h (GLOBAL_ASM_OP): Likewise. |
| * config/pa/pa-openbsd.h (TARGET_ASM_GLOBALIZE_LABEL): Likewise. |
| * config/pa/pa-protos.h (pa_eh_return_handler_rtx): Likewise. |
| (pa_legitimize_reload_address): Likewise. |
| (pa_can_use_return_insn): Likewise. |
| * config/pa/pa.cc (mem_shadd_or_shadd_rtx_p): Likewise. |
| (som_output_text_section_asm_op): Likewise. |
| * config/pa/pa.h (PROFILE_BEFORE_PROLOGUE): Likewise. |
| * config/pa/pa.md: Likewise. |
| * config/pa/som.h: Likewise. |
| * config/pa/t-pa: Likewise. |
| * config/pdp11/pdp11.cc (decode_pdp11_d): Likewise. |
| * config/pdp11/pdp11.h: Likewise. |
| * config/pdp11/pdp11.md: Likewise. |
| * config/pdp11/t-pdp11: Likewise. |
| * config/pru/pru.md: Likewise. |
| * config/pru/t-pru: Likewise. |
| * config/riscv/riscv-protos.h (NUM_SYMBOL_TYPES): Likewise. |
| (riscv_gpr_save_operation_p): Likewise. |
| (riscv_d_register_target_info): Likewise. |
| (riscv_init_builtins): Likewise. |
| * config/riscv/riscv.cc (riscv_output_mi_thunk): Likewise. |
| * config/riscv/riscv.h (CSW_MAX_OFFSET): Likewise. |
| * config/riscv/t-riscv: Likewise. |
| * config/rl78/rl78.cc (rl78_asm_ctor_dtor): Likewise. |
| * config/rl78/t-rl78: Likewise. |
| * config/rs6000/aix.h: Likewise. |
| * config/rs6000/aix71.h (ASM_SPEC_COMMON): Likewise. |
| * config/rs6000/aix72.h (ASM_SPEC_COMMON): Likewise. |
| * config/rs6000/aix73.h (ASM_SPEC_COMMON): Likewise. |
| * config/rs6000/darwin.h (TARGET_ASM_GLOBALIZE_LABEL): Likewise. |
| * config/rs6000/driver-rs6000.cc: Likewise. |
| * config/rs6000/freebsd.h: Likewise. |
| * config/rs6000/freebsd64.h: Likewise. |
| * config/rs6000/lynx.h (ASM_OUTPUT_ALIGN): Likewise. |
| * config/rs6000/rbtree.cc: Likewise. |
| * config/rs6000/rbtree.h: Likewise. |
| * config/rs6000/rs6000-c.cc (rs6000_target_modify_macros): Likewise. |
| * config/rs6000/rs6000-call.cc (rs6000_invalid_builtin): Likewise. |
| (rs6000_expand_builtin): Likewise. |
| (rs6000_init_builtins): Likewise. |
| * config/rs6000/rs6000-cpus.def: Likewise. |
| * config/rs6000/rs6000-gen-builtins.cc (write_init_ovld_table): Likewise. |
| * config/rs6000/rs6000-internal.h (ALTIVEC_REG_BIT): Likewise. |
| (quad_address_offset_p): Likewise. |
| * config/rs6000/rs6000-logue.cc (interesting_frame_related_regno): Likewise. |
| (rs6000_emit_epilogue): Likewise. |
| * config/rs6000/rs6000-overload.def: Likewise. |
| * config/rs6000/rs6000-p8swap.cc: Likewise. |
| * config/rs6000/rs6000-protos.h (GCC_RS6000_PROTOS_H): Likewise. |
| (rs6000_const_f32_to_i32): Likewise. |
| * config/rs6000/rs6000.cc (legitimate_lo_sum_address_p): Likewise. |
| (rs6000_debug_legitimize_address): Likewise. |
| (rs6000_mode_dependent_address): Likewise. |
| (rs6000_adjust_priority): Likewise. |
| (rs6000_c_mode_for_suffix): Likewise. |
| * config/rs6000/rs6000.h (defined): Likewise. |
| (LONG_DOUBLE_TYPE_SIZE): Likewise. |
| * config/rs6000/rs6000.md: Likewise. |
| * config/rs6000/sysv4.h: Likewise. |
| * config/rs6000/t-linux: Likewise. |
| * config/rs6000/t-linux64: Likewise. |
| * config/rs6000/t-rs6000: Likewise. |
| * config/rs6000/x-darwin: Likewise. |
| * config/rs6000/x-darwin64: Likewise. |
| * config/rs6000/x-rs6000: Likewise. |
| * config/rs6000/xcoff.h (ASM_OUTPUT_LABELREF): Likewise. |
| * config/rx/rx.cc (rx_expand_builtin): Likewise. |
| * config/s390/constraints.md: Likewise. |
| * config/s390/driver-native.cc: Likewise. |
| * config/s390/htmxlintrin.h: Likewise. |
| * config/s390/s390-builtins.def (B_DEF): Likewise. |
| (OB_DEF_VAR): Likewise. |
| * config/s390/s390-builtins.h: Likewise. |
| * config/s390/s390-c.cc: Likewise. |
| * config/s390/s390-opts.h: Likewise. |
| * config/s390/s390-protos.h (s390_check_symref_alignment): Likewise. |
| (s390_register_target_pragmas): Likewise. |
| * config/s390/s390.cc (s390_init_builtins): Likewise. |
| (s390_expand_plus_operand): Likewise. |
| (s390_expand_atomic): Likewise. |
| (s390_valid_target_attribute_inner_p): Likewise. |
| * config/s390/s390.h (LONG_DOUBLE_TYPE_SIZE): Likewise. |
| * config/s390/s390.md: Likewise. |
| * config/s390/t-s390: Likewise. |
| * config/s390/vx-builtins.md: Likewise. |
| * config/s390/x-native: Likewise. |
| * config/sh/divtab-sh4-300.cc (main): Likewise. |
| * config/sh/divtab-sh4.cc (main): Likewise. |
| * config/sh/divtab.cc (main): Likewise. |
| * config/sh/elf.h: Likewise. |
| * config/sh/sh-protos.h (sh_fsca_int2sf): Likewise. |
| * config/sh/sh.cc (SYMBOL_FLAG_FUNCVEC_FUNCTION): Likewise. |
| (sh_struct_value_rtx): Likewise. |
| (sh_remove_reg_dead_or_unused_notes): Likewise. |
| * config/sh/sh.h (MIN_UNITS_PER_WORD): Likewise. |
| * config/sh/t-sh: Likewise. |
| * config/sol2-protos.h (solaris_override_options): Likewise. |
| * config/sol2.h: Likewise. |
| * config/sparc/driver-sparc.cc: Likewise. |
| * config/sparc/freebsd.h: Likewise. |
| * config/sparc/sparc-protos.h (make_pass_work_around_errata): Likewise. |
| * config/sparc/sparc.cc (sparc_output_mi_thunk): Likewise. |
| (sparc_asan_shadow_offset): Likewise. |
| * config/sparc/sparc.h: Likewise. |
| * config/sparc/sparc.md: Likewise. |
| * config/sparc/t-sparc: Likewise. |
| * config/sparc/x-sparc: Likewise. |
| * config/stormy16/stormy16.cc (xstormy16_mode_dependent_address_p): Likewise. |
| * config/t-darwin: Likewise. |
| * config/t-dragonfly: Likewise. |
| * config/t-freebsd: Likewise. |
| * config/t-glibc: Likewise. |
| * config/t-linux: Likewise. |
| * config/t-netbsd: Likewise. |
| * config/t-openbsd: Likewise. |
| * config/t-pnt16-warn: Likewise. |
| * config/t-sol2: Likewise. |
| * config/t-vxworks: Likewise. |
| * config/t-winnt: Likewise. |
| * config/tilegx/t-tilegx: Likewise. |
| * config/tilegx/tilegx-c.cc: Likewise. |
| * config/tilegx/tilegx-protos.h (tilegx_function_profiler): Likewise. |
| * config/tilegx/tilegx.md: Likewise. |
| * config/tilepro/t-tilepro: Likewise. |
| * config/tilepro/tilepro-c.cc: Likewise. |
| * config/v850/t-v850: Likewise. |
| * config/v850/v850-protos.h: Likewise. |
| * config/v850/v850.cc (F): Likewise. |
| * config/v850/v850.h (enum reg_class): Likewise. |
| (SLOW_BYTE_ACCESS): Likewise. |
| * config/vax/vax.cc (vax_mode_dependent_address_p): Likewise. |
| * config/vax/vax.h (enum reg_class): Likewise. |
| * config/vax/vax.md: Likewise. |
| * config/visium/visium.cc (visium_legitimate_address_p): Likewise. |
| * config/visium/visium.h: Likewise. |
| * config/vms/t-vms: Likewise. |
| * config/vms/vms-crtlmap.map: Likewise. |
| * config/vms/vms-protos.h (vms_c_get_vms_ver): Likewise. |
| * config/vx-common.h: Likewise. |
| * config/x-darwin: Likewise. |
| * config/x-hpux: Likewise. |
| * config/x-linux: Likewise. |
| * config/x-netbsd: Likewise. |
| * config/x-openbsd: Likewise. |
| * config/x-solaris: Likewise. |
| * config/xtensa/xtensa-protos.h (xtensa_mem_offset): Likewise. |
| * config/xtensa/xtensa.cc (xtensa_option_override): Likewise. |
| * config/xtensa/xtensa.h: Likewise. |
| * configure.ac: Likewise. |
| * context.cc: Likewise. |
| * convert.h: Likewise. |
| * coretypes.h: Likewise. |
| * coverage.cc: Likewise. |
| * coverage.h: Likewise. |
| * cppdefault.h (struct default_include): Likewise. |
| * cprop.cc (local_cprop_pass): Likewise. |
| (one_cprop_pass): Likewise. |
| * cse.cc (hash_rtx_cb): Likewise. |
| (fold_rtx): Likewise. |
| * ctfc.h (ctfc_get_num_vlen_bytes): Likewise. |
| * data-streamer.h (bp_unpack_var_len_int): Likewise. |
| (streamer_write_widest_int): Likewise. |
| * dbgcnt.def: Likewise. |
| * dbxout.cc (dbxout_early_global_decl): Likewise. |
| (dbxout_common_check): Likewise. |
| * dbxout.h: Likewise. |
| * debug.h (struct gcc_debug_hooks): Likewise. |
| (dump_go_spec_init): Likewise. |
| * df-core.cc: Likewise. |
| * df-scan.cc (df_insn_info_delete): Likewise. |
| (df_insn_delete): Likewise. |
| * df.h (debug_df_chain): Likewise. |
| (can_move_insns_across): Likewise. |
| * dfp.cc (decimal_from_binary): Likewise. |
| * diagnostic-color.cc: Likewise. |
| * diagnostic-event-id.h: Likewise. |
| * diagnostic-show-locus.cc (test_one_liner_labels): Likewise. |
| * diagnostic.cc (bt_callback): Likewise. |
| (num_digits): Likewise. |
| * doc/avr-mmcu.texi: Likewise. |
| * doc/cfg.texi: Likewise. |
| * doc/contrib.texi: Likewise. |
| * doc/cppinternals.texi: Likewise. |
| * doc/extend.texi: Likewise. |
| * doc/generic.texi: Likewise. |
| * doc/gimple.texi: Likewise. |
| * doc/gty.texi: Likewise. |
| * doc/invoke.texi: Likewise. |
| * doc/loop.texi: Likewise. |
| * doc/lto.texi: Likewise. |
| * doc/match-and-simplify.texi: Likewise. |
| * doc/md.texi: Likewise. |
| * doc/optinfo.texi: Likewise. |
| * doc/options.texi: Likewise. |
| * doc/passes.texi: Likewise. |
| * doc/plugins.texi: Likewise. |
| * doc/rtl.texi: Likewise. |
| * doc/sourcebuild.texi: Likewise. |
| * doc/tm.texi: Likewise. |
| * doc/tm.texi.in: Likewise. |
| * doc/tree-ssa.texi: Likewise. |
| * dojump.cc (do_jump): Likewise. |
| * dojump.h: Likewise. |
| * dumpfile.cc (test_impl_location): Likewise. |
| (test_capture_of_dump_calls): Likewise. |
| * dumpfile.h (enum dump_kind): Likewise. |
| (class dump_location_t): Likewise. |
| (dump_enabled_p): Likewise. |
| (enable_rtl_dump_file): Likewise. |
| (dump_combine_total_stats): Likewise. |
| * dwarf2asm.cc (dw2_asm_output_delta_uleb128): Likewise. |
| * dwarf2ctf.h (ctf_debug_finish): Likewise. |
| * dwarf2out.cc (dwarf2out_begin_prologue): Likewise. |
| (struct loc_descr_context): Likewise. |
| (rtl_for_decl_location): Likewise. |
| (gen_subprogram_die): Likewise. |
| (gen_label_die): Likewise. |
| (is_trivial_indirect_ref): Likewise. |
| (dwarf2out_late_global_decl): Likewise. |
| (dwarf_file_hasher::hash): Likewise. |
| (dwarf2out_end_source_file): Likewise. |
| (dwarf2out_define): Likewise. |
| (dwarf2out_early_finish): Likewise. |
| * dwarf2out.h (struct dw_fde_node): Likewise. |
| (struct dw_discr_list_node): Likewise. |
| (output_loc_sequence_raw): Likewise. |
| * emit-rtl.cc (gen_raw_REG): Likewise. |
| (maybe_set_max_label_num): Likewise. |
| * emit-rtl.h (struct rtl_data): Likewise. |
| * errors.cc (internal_error): Likewise. |
| (trim_filename): Likewise. |
| * et-forest.cc: Likewise. |
| * except.cc (init_eh_for_function): Likewise. |
| * explow.cc (promote_ssa_mode): Likewise. |
| (get_dynamic_stack_size): Likewise. |
| * explow.h: Likewise. |
| * expmed.h: Likewise. |
| * expr.cc (safe_from_p): Likewise. |
| (expand_expr_real_2): Likewise. |
| (expand_expr_real_1): Likewise. |
| * file-prefix-map.cc (remap_filename): Likewise. |
| * final.cc (app_enable): Likewise. |
| (make_pass_compute_alignments): Likewise. |
| (final_scan_insn_1): Likewise. |
| (final_scan_insn): Likewise. |
| * fixed-value.h (fixed_from_string): Likewise. |
| * flag-types.h (NO_DEBUG): Likewise. |
| (DWARF2_DEBUG): Likewise. |
| (VMS_DEBUG): Likewise. |
| (BTF_DEBUG): Likewise. |
| (enum ctf_debug_info_levels): Likewise. |
| * fold-const.cc (const_binop): Likewise. |
| (fold_binary_loc): Likewise. |
| (fold_checksum_tree): Likewise. |
| * fp-test.cc: Likewise. |
| * function.cc (expand_function_end): Likewise. |
| * function.h (struct function): Likewise. |
| * fwprop.cc (should_replace_address): Likewise. |
| * gcc-main.cc: Likewise. |
| * gcc-rich-location.h (class gcc_rich_location): Likewise. |
| * gcc-symtab.h: Likewise. |
| * gcc.cc (MIN_FATAL_STATUS): Likewise. |
| (driver_handle_option): Likewise. |
| (quote_spec_arg): Likewise. |
| (driver::finalize): Likewise. |
| * gcc.h (set_input): Likewise. |
| * gcov-dump.cc: Likewise. |
| * gcov.cc (solve_flow_graph): Likewise. |
| * gcse-common.cc: Likewise. |
| * gcse.cc (make_pass_rtl_hoist): Likewise. |
| * genattr-common.cc: Likewise. |
| * genattrtab.cc (min_fn): Likewise. |
| (write_const_num_delay_slots): Likewise. |
| * genautomata.cc: Likewise. |
| * genconditions.cc (write_one_condition): Likewise. |
| * genconstants.cc: Likewise. |
| * genemit.cc (gen_exp): Likewise. |
| * generic-match-head.cc: Likewise. |
| * genextract.cc: Likewise. |
| * gengenrtl.cc (always_void_p): Likewise. |
| * gengtype-parse.cc (gtymarker_opt): Likewise. |
| * gengtype-state.cc (state_writer::state_writer): Likewise. |
| (write_state_trailer): Likewise. |
| (equals_type_number): Likewise. |
| (read_state): Likewise. |
| * gengtype.cc (open_base_files): Likewise. |
| (struct file_rule_st): Likewise. |
| (header_dot_h_frul): Likewise. |
| * gengtype.h: Likewise. |
| * genmatch.cc (main): Likewise. |
| * genmddeps.cc: Likewise. |
| * genmodes.cc (emit_mode_inner): Likewise. |
| (emit_mode_unit_size): Likewise. |
| * genpeep.cc (gen_peephole): Likewise. |
| * genpreds.cc (write_tm_preds_h): Likewise. |
| * genrecog.cc (validate_pattern): Likewise. |
| (write_header): Likewise. |
| (main): Likewise. |
| * gensupport.cc (change_subst_attribute): Likewise. |
| (traverse_c_tests): Likewise. |
| (add_predicate): Likewise. |
| (init_predicate_table): Likewise. |
| * gensupport.h (struct optab_pattern): Likewise. |
| (get_num_insn_codes): Likewise. |
| (maybe_eval_c_test): Likewise. |
| (struct pred_data): Likewise. |
| * ggc-internal.h: Likewise. |
| * gimple-fold.cc (maybe_fold_reference): Likewise. |
| (get_range_strlen_tree): Likewise. |
| * gimple-fold.h (gimple_stmt_integer_valued_real_p): Likewise. |
| * gimple-low.cc: Likewise. |
| * gimple-match-head.cc (directly_supported_p): Likewise. |
| * gimple-pretty-print.h: Likewise. |
| * gimple-ssa-sprintf.cc (format_percent): Likewise. |
| (adjust_range_for_overflow): Likewise. |
| * gimple-streamer.h: Likewise. |
| * gimple.h (struct GTY): Likewise. |
| (is_gimple_resx): Likewise. |
| * gimplify.cc (gimplify_expr): Likewise. |
| (gimplify_init_constructor): Likewise. |
| (omp_construct_selector_matches): Likewise. |
| (gimplify_omp_target_update): Likewise. |
| (gimplify_omp_ordered): Likewise. |
| (gimplify_va_arg_expr): Likewise. |
| * graphite-isl-ast-to-gimple.cc (should_copy_to_new_region): Likewise. |
| * haifa-sched.cc (increase_insn_priority): Likewise. |
| (try_ready): Likewise. |
| (sched_create_recovery_edges): Likewise. |
| * ifcvt.cc (find_if_case_1): Likewise. |
| (find_if_case_2): Likewise. |
| * inchash.h: Likewise. |
| * incpath.cc (add_env_var_paths): Likewise. |
| * input.cc (dump_location_info): Likewise. |
| (assert_loceq): Likewise. |
| (test_lexer_string_locations_concatenation_1): Likewise. |
| (test_lexer_string_locations_concatenation_2): Likewise. |
| (test_lexer_string_locations_concatenation_3): Likewise. |
| * input.h (BUILTINS_LOCATION): Likewise. |
| (class string_concat_db): Likewise. |
| * internal-fn.cc (expand_MUL_OVERFLOW): Likewise. |
| (expand_LOOP_VECTORIZED): Likewise. |
| * ipa-cp.cc (make_pass_ipa_cp): Likewise. |
| * ipa-fnsummary.cc (remap_freqcounting_preds_after_dup): Likewise. |
| (ipa_fn_summary_t::duplicate): Likewise. |
| (make_pass_ipa_fn_summary): Likewise. |
| * ipa-fnsummary.h (enum ipa_hints_vals): Likewise. |
| * ipa-free-lang-data.cc (fld_simplified_type): Likewise. |
| (free_lang_data_in_decl): Likewise. |
| * ipa-inline.cc (compute_inlined_call_time): Likewise. |
| (inline_always_inline_functions): Likewise. |
| * ipa-inline.h (free_growth_caches): Likewise. |
| (inline_account_function_p): Likewise. |
| * ipa-modref.cc (modref_access_analysis::analyze_stmt): Likewise. |
| (modref_eaf_analysis::analyze_ssa_name): Likewise. |
| * ipa-param-manipulation.cc (ipa_param_body_adjustments::mark_dead_statements): Likewise. |
| (ipa_param_body_adjustments::remap_with_debug_expressions): Likewise. |
| * ipa-prop.cc (ipa_set_node_agg_value_chain): Likewise. |
| * ipa-prop.h (IPA_UNDESCRIBED_USE): Likewise. |
| (unadjusted_ptr_and_unit_offset): Likewise. |
| * ipa-reference.cc (make_pass_ipa_reference): Likewise. |
| * ipa-reference.h (GCC_IPA_REFERENCE_H): Likewise. |
| * ipa-split.cc (consider_split): Likewise. |
| * ipa-sra.cc (isra_read_node_info): Likewise. |
| * ipa-utils.h (struct ipa_dfs_info): Likewise. |
| (recursive_call_p): Likewise. |
| (ipa_make_function_pure): Likewise. |
| * ira-build.cc (ira_create_allocno): Likewise. |
| (ira_flattening): Likewise. |
| * ira-color.cc (do_coloring): Likewise. |
| (update_curr_costs): Likewise. |
| * ira-conflicts.cc (process_regs_for_copy): Likewise. |
| * ira-int.h (struct ira_emit_data): Likewise. |
| (ira_prohibited_mode_move_regs): Likewise. |
| (ira_get_dup_out_num): Likewise. |
| (ira_destroy): Likewise. |
| (ira_tune_allocno_costs): Likewise. |
| (ira_implicitly_set_insn_hard_regs): Likewise. |
| (ira_build_conflicts): Likewise. |
| (ira_color): Likewise. |
| * ira-lives.cc (process_bb_node_lives): Likewise. |
| * ira.cc (class ira_spilled_reg_stack_slot): Likewise. |
| (setup_uniform_class_p): Likewise. |
| (def_dominates_uses): Likewise. |
| * ira.h (ira_nullify_asm_goto): Likewise. |
| * langhooks.cc (lhd_post_options): Likewise. |
| * langhooks.h (class substring_loc): Likewise. |
| (struct lang_hooks_for_tree_inlining): Likewise. |
| (struct lang_hooks_for_types): Likewise. |
| (struct lang_hooks): Likewise. |
| * libfuncs.h (synchronize_libfunc): Likewise. |
| * loop-doloop.cc (doloop_condition_get): Likewise. |
| * loop-init.cc (fix_loop_structure): Likewise. |
| * loop-invariant.cc: Likewise. |
| * lower-subreg.h: Likewise. |
| * lra-constraints.cc (curr_insn_transform): Likewise. |
| * lra-int.h (struct lra_insn_reg): Likewise. |
| (lra_undo_inheritance): Likewise. |
| (lra_setup_reload_pseudo_preferenced_hard_reg): Likewise. |
| (lra_split_hard_reg_for): Likewise. |
| (lra_coalesce): Likewise. |
| (lra_final_code_change): Likewise. |
| * lra-spills.cc (lra_final_code_change): Likewise. |
| * lra.cc (lra_process_new_insns): Likewise. |
| * lto-compress.h (struct lto_compression_stream): Likewise. |
| * lto-streamer-out.cc (DFS::DFS_write_tree_body): Likewise. |
| (write_symbol): Likewise. |
| * lto-streamer.h (enum LTO_tags): Likewise. |
| (lto_value_range_error): Likewise. |
| (lto_append_block): Likewise. |
| (lto_streamer_hooks_init): Likewise. |
| (stream_read_tree_ref): Likewise. |
| (lto_prepare_function_for_streaming): Likewise. |
| (select_what_to_stream): Likewise. |
| (omp_lto_input_declare_variant_alt): Likewise. |
| (cl_optimization_stream_in): Likewise. |
| * lto-wrapper.cc (append_compiler_options): Likewise. |
| * machmode.def: Likewise. |
| * machmode.h (struct int_n_data_t): Likewise. |
| * main.cc (main): Likewise. |
| * match.pd: Likewise. |
| * omp-builtins.def (BUILT_IN_GOMP_CRITICAL_NAME_END): Likewise. |
| (BUILT_IN_GOMP_LOOP_ULL_ORDERED_RUNTIME_NEXT): Likewise. |
| * omp-expand.cc (expand_omp_atomic_fetch_op): Likewise. |
| (make_pass_expand_omp_ssa): Likewise. |
| * omp-low.cc (struct omp_context): Likewise. |
| (struct omp_taskcopy_context): Likewise. |
| (lower_omp): Likewise. |
| * omp-oacc-neuter-broadcast.cc (omp_sese_active_worker_call): Likewise. |
| (mask_name): Likewise. |
| (omp_sese_dump_pars): Likewise. |
| (worker_single_simple): Likewise. |
| * omp-offload.cc (omp_finish_file): Likewise. |
| (execute_oacc_loop_designation): Likewise. |
| * optabs-query.cc (lshift_cheap_p): Likewise. |
| * optc-gen.awk: Likewise. |
| * optc-save-gen.awk: Likewise. |
| * optinfo-emit-json.cc (optrecord_json_writer::optrecord_json_writer): Likewise. |
| * opts-common.cc: Likewise. |
| * output.h (app_enable): Likewise. |
| (output_operand_lossage): Likewise. |
| (insn_current_reference_address): Likewise. |
| (get_insn_template): Likewise. |
| (output_quoted_string): Likewise. |
| * pass_manager.h (struct register_pass_info): Likewise. |
| * plugin.cc: Likewise. |
| * plugin.def (PLUGIN_ANALYZER_INIT): Likewise. |
| * plugin.h (invoke_plugin_callbacks): Likewise. |
| * pointer-query.cc (handle_mem_ref): Likewise. |
| * postreload-gcse.cc (alloc_mem): Likewise. |
| * predict.h (enum prediction): Likewise. |
| (add_reg_br_prob_note): Likewise. |
| * prefix.h: Likewise. |
| * profile.h (get_working_sets): Likewise. |
| * read-md.cc: Likewise. |
| * read-md.h (struct mapping): Likewise. |
| (class md_reader): Likewise. |
| (class noop_reader): Likewise. |
| * read-rtl-function.cc (function_reader::create_function): Likewise. |
| (function_reader::extra_parsing_for_operand_code_0): Likewise. |
| * read-rtl.cc (initialize_iterators): Likewise. |
| * real.cc: Likewise. |
| * real.h (struct real_value): Likewise. |
| (format_helper::format_helper): Likewise. |
| (real_hash): Likewise. |
| (real_can_shorten_arithmetic): Likewise. |
| * recog.cc (struct target_recog): Likewise. |
| (offsettable_nonstrict_memref_p): Likewise. |
| (constrain_operands): Likewise. |
| * recog.h (MAX_RECOG_ALTERNATIVES): Likewise. |
| (which_op_alt): Likewise. |
| (struct insn_gen_fn): Likewise. |
| * reg-notes.def (REG_NOTE): Likewise. |
| * reg-stack.cc: Likewise. |
| * regs.h (reg_is_parm_p): Likewise. |
| * regset.h: Likewise. |
| * reload.cc (push_reload): Likewise. |
| (find_reloads): Likewise. |
| (find_reloads_address_1): Likewise. |
| (find_replacement): Likewise. |
| (refers_to_regno_for_reload_p): Likewise. |
| (refers_to_mem_for_reload_p): Likewise. |
| * reload.h (push_reload): Likewise. |
| (deallocate_reload_reg): Likewise. |
| * reload1.cc (emit_input_reload_insns): Likewise. |
| * reorg.cc (relax_delay_slots): Likewise. |
| * rtl.def (UNKNOWN): Likewise. |
| (SEQUENCE): Likewise. |
| (BARRIER): Likewise. |
| (ASM_OPERANDS): Likewise. |
| (EQ_ATTR_ALT): Likewise. |
| * rtl.h (struct GTY): Likewise. |
| (LABEL_NAME): Likewise. |
| (LABEL_ALT_ENTRY_P): Likewise. |
| (SUBREG_BYTE): Likewise. |
| (get_stack_check_protect): Likewise. |
| (dump_rtx_statistics): Likewise. |
| (unwrap_const_vec_duplicate): Likewise. |
| (subreg_promoted_mode): Likewise. |
| (gen_lowpart_common): Likewise. |
| (operand_subword): Likewise. |
| (immed_wide_int_const): Likewise. |
| (decide_function_section): Likewise. |
| (active_insn_p): Likewise. |
| (delete_related_insns): Likewise. |
| (try_split): Likewise. |
| (val_signbit_known_clear_p): Likewise. |
| (simplifiable_subregs): Likewise. |
| (set_insn_deleted): Likewise. |
| (subreg_get_info): Likewise. |
| (remove_free_EXPR_LIST_node): Likewise. |
| (finish_subregs_of_mode): Likewise. |
| (get_mem_attrs): Likewise. |
| (lookup_constant_def): Likewise. |
| (rtx_to_tree_code): Likewise. |
| (hash_rtx): Likewise. |
| (condjump_in_parallel_p): Likewise. |
| (validate_subreg): Likewise. |
| (make_compound_operation): Likewise. |
| (schedule_ebbs): Likewise. |
| (print_inline_rtx): Likewise. |
| (fixup_args_size_notes): Likewise. |
| (expand_dec): Likewise. |
| (prepare_copy_insn): Likewise. |
| (mark_elimination): Likewise. |
| (valid_mode_changes_for_regno): Likewise. |
| (make_debug_expr_from_rtl): Likewise. |
| (delete_vta_debug_insns): Likewise. |
| (simplify_using_condition): Likewise. |
| (set_insn_locations): Likewise. |
| (fatal_insn_not_found): Likewise. |
| (word_register_operation_p): Likewise. |
| * rtlanal.cc (get_call_fndecl): Likewise. |
| (side_effects_p): Likewise. |
| (subreg_nregs): Likewise. |
| (rtx_cost): Likewise. |
| (canonicalize_condition): Likewise. |
| * rtlanal.h (rtx_properties::try_to_add_note): Likewise. |
| * run-rtl-passes.cc (run_rtl_passes): Likewise. |
| * sanitizer.def (BUILT_IN_ASAN_VERSION_MISMATCH_CHECK): Likewise. |
| * sched-deps.cc (add_dependence_1): Likewise. |
| * sched-ebb.cc (begin_move_insn): Likewise. |
| (add_deps_for_risky_insns): Likewise. |
| (advance_target_bb): Likewise. |
| * sched-int.h (reemit_notes): Likewise. |
| (struct _haifa_insn_data): Likewise. |
| (HID): Likewise. |
| (DEP_CANCELLED): Likewise. |
| (debug_ds): Likewise. |
| (number_in_ready): Likewise. |
| (schedule_ebbs_finish): Likewise. |
| (find_modifiable_mems): Likewise. |
| * sched-rgn.cc (debug_rgn_dependencies): Likewise. |
| * sel-sched-dump.cc (dump_lv_set): Likewise. |
| * sel-sched-dump.h: Likewise. |
| * sel-sched-ir.cc (sel_insn_rtx_cost): Likewise. |
| (setup_id_reg_sets): Likewise. |
| (has_dependence_p): Likewise. |
| (sel_num_cfg_preds_gt_1): Likewise. |
| (bb_ends_ebb_p): Likewise. |
| * sel-sched-ir.h (struct _list_node): Likewise. |
| (struct idata_def): Likewise. |
| (bb_next_bb): Likewise. |
| * sel-sched.cc (vinsn_writes_one_of_regs_p): Likewise. |
| (choose_best_pseudo_reg): Likewise. |
| (verify_target_availability): Likewise. |
| (can_speculate_dep_p): Likewise. |
| (sel_rank_for_schedule): Likewise. |
| * selftest-run-tests.cc (selftest::run_tests): Likewise. |
| * selftest.h (class auto_fix_quotes): Likewise. |
| * shrink-wrap.cc (handle_simple_exit): Likewise. |
| * shrink-wrap.h: Likewise. |
| * simplify-rtx.cc (simplify_context::simplify_associative_operation): Likewise. |
| (simplify_context::simplify_gen_vec_select): Likewise. |
| * spellcheck-tree.h: Likewise. |
| * spellcheck.h: Likewise. |
| * statistics.h (struct function): Likewise. |
| * stmt.cc (conditional_probability): Likewise. |
| * stmt.h: Likewise. |
| * stor-layout.h: Likewise. |
| * streamer-hooks.h: Likewise. |
| * stringpool.h: Likewise. |
| * symtab.cc (symbol_table::change_decl_assembler_name): Likewise. |
| * target.def (HOOK_VECTOR_END): Likewise. |
| (type.): Likewise. |
| * target.h (union cumulative_args_t): Likewise. |
| (by_pieces_ninsns): Likewise. |
| (class predefined_function_abi): Likewise. |
| * targhooks.cc (default_translate_mode_attribute): Likewise. |
| * timevar.def: Likewise. |
| * timevar.h (class timer): Likewise. |
| * toplev.h (enable_rtl_dump_file): Likewise. |
| * trans-mem.cc (collect_bb2reg): Likewise. |
| * tree-call-cdce.cc (gen_conditions_for_pow): Likewise. |
| * tree-cfg.cc (remove_bb): Likewise. |
| (verify_gimple_debug): Likewise. |
| (remove_edge_and_dominated_blocks): Likewise. |
| (push_fndecl): Likewise. |
| * tree-cfgcleanup.h (GCC_TREE_CFGCLEANUP_H): Likewise. |
| * tree-complex.cc (expand_complex_multiplication): Likewise. |
| (expand_complex_div_straight): Likewise. |
| * tree-core.h (enum tree_index): Likewise. |
| (enum operand_equal_flag): Likewise. |
| * tree-eh.cc (honor_protect_cleanup_actions): Likewise. |
| * tree-if-conv.cc (if_convertible_gimple_assign_stmt_p): Likewise. |
| * tree-inline.cc (initialize_inlined_parameters): Likewise. |
| * tree-inline.h (force_value_to_type): Likewise. |
| * tree-nested.cc (get_chain_decl): Likewise. |
| (walk_all_functions): Likewise. |
| * tree-object-size.h: Likewise. |
| * tree-outof-ssa.cc: Likewise. |
| * tree-parloops.cc (create_parallel_loop): Likewise. |
| * tree-pretty-print.cc (print_generic_expr_to_str): Likewise. |
| (dump_generic_node): Likewise. |
| * tree-profile.cc (tree_profiling): Likewise. |
| * tree-sra.cc (maybe_add_sra_candidate): Likewise. |
| * tree-ssa-address.cc: Likewise. |
| * tree-ssa-alias.cc: Likewise. |
| * tree-ssa-alias.h (ao_ref::max_size_known_p): Likewise. |
| (dump_alias_stats): Likewise. |
| * tree-ssa-ccp.cc: Likewise. |
| * tree-ssa-coalesce.h: Likewise. |
| * tree-ssa-live.cc (remove_unused_scope_block_p): Likewise. |
| * tree-ssa-loop-manip.cc (copy_phi_node_args): Likewise. |
| * tree-ssa-loop-unswitch.cc: Likewise. |
| * tree-ssa-math-opts.cc: Likewise. |
| * tree-ssa-operands.cc (class operands_scanner): Likewise. |
| * tree-ssa-pre.cc: Likewise. |
| * tree-ssa-reassoc.cc (optimize_ops_list): Likewise. |
| (debug_range_entry): Likewise. |
| * tree-ssa-sccvn.cc (eliminate_dom_walker::eliminate_stmt): Likewise. |
| * tree-ssa-sccvn.h (TREE_SSA_SCCVN_H): Likewise. |
| * tree-ssa-scopedtables.cc (add_expr_commutative): Likewise. |
| (equal_mem_array_ref_p): Likewise. |
| * tree-ssa-strlen.cc (is_strlen_related_p): Likewise. |
| * tree-ssa-strlen.h (get_range_strlen_dynamic): Likewise. |
| * tree-ssa-tail-merge.cc (stmt_local_def): Likewise. |
| * tree-ssa-ter.h: Likewise. |
| * tree-ssa-threadupdate.h (enum bb_dom_status): Likewise. |
| * tree-streamer-in.cc (lto_input_ts_block_tree_pointers): Likewise. |
| * tree-streamer-out.cc (pack_ts_block_value_fields): Likewise. |
| (write_ts_block_tree_pointers): Likewise. |
| * tree-streamer.h (struct streamer_tree_cache_d): Likewise. |
| (streamer_read_tree_bitfields): Likewise. |
| (streamer_write_integer_cst): Likewise. |
| * tree-vect-patterns.cc (apply_binop_and_append_stmt): Likewise. |
| (vect_synth_mult_by_constant): Likewise. |
| * tree-vect-stmts.cc (vectorizable_operation): Likewise. |
| * tree-vectorizer.cc: Likewise. |
| * tree-vectorizer.h (class auto_purge_vect_location): Likewise. |
| (vect_update_inits_of_drs): Likewise. |
| (vect_get_mask_type_for_stmt): Likewise. |
| (vect_rgroup_iv_might_wrap_p): Likewise. |
| (cse_and_gimplify_to_preheader): Likewise. |
| (vect_free_slp_tree): Likewise. |
| (vect_pattern_recog): Likewise. |
| (vect_stmt_dominates_stmt_p): Likewise. |
| * tree.cc (initialize_tree_contains_struct): Likewise. |
| (need_assembler_name_p): Likewise. |
| (type_with_interoperable_signedness): Likewise. |
| * tree.def (SWITCH_EXPR): Likewise. |
| * tree.h (TYPE_SYMTAB_ADDRESS): Likewise. |
| (poly_int_tree_p): Likewise. |
| (inlined_function_outer_scope_p): Likewise. |
| (tree_code_for_canonical_type_merging): Likewise. |
| * value-prof.cc: Likewise. |
| * value-prof.h (get_nth_most_common_value): Likewise. |
| (find_func_by_profile_id): Likewise. |
| * value-range.cc (vrp_operand_equal_p): Likewise. |
| * value-range.h: Likewise. |
| * var-tracking.cc: Likewise. |
| * varasm.cc (default_function_section): Likewise. |
| (function_section_1): Likewise. |
| (assemble_variable): Likewise. |
| (handle_vtv_comdat_section): Likewise. |
| * vec.h (struct vec_prefix): Likewise. |
| * vmsdbgout.cc (full_name): Likewise. |
| * vtable-verify.cc: Likewise. |
| * vtable-verify.h (struct vtv_graph_node): Likewise. |
| * xcoffout.cc: Likewise. |
| * xcoffout.h (DEBUG_SYMS_TEXT): Likewise. |
| |
| 2022-01-17 Martin Liska <mliska@suse.cz> |
| |
| * adjust-alignment.c: Moved to... |
| * adjust-alignment.cc: ...here. |
| * alias.c: Moved to... |
| * alias.cc: ...here. |
| * alloc-pool.c: Moved to... |
| * alloc-pool.cc: ...here. |
| * asan.c: Moved to... |
| * asan.cc: ...here. |
| * attribs.c: Moved to... |
| * attribs.cc: ...here. |
| * auto-inc-dec.c: Moved to... |
| * auto-inc-dec.cc: ...here. |
| * auto-profile.c: Moved to... |
| * auto-profile.cc: ...here. |
| * bb-reorder.c: Moved to... |
| * bb-reorder.cc: ...here. |
| * bitmap.c: Moved to... |
| * bitmap.cc: ...here. |
| * btfout.c: Moved to... |
| * btfout.cc: ...here. |
| * builtins.c: Moved to... |
| * builtins.cc: ...here. |
| * caller-save.c: Moved to... |
| * caller-save.cc: ...here. |
| * calls.c: Moved to... |
| * calls.cc: ...here. |
| * ccmp.c: Moved to... |
| * ccmp.cc: ...here. |
| * cfg.c: Moved to... |
| * cfg.cc: ...here. |
| * cfganal.c: Moved to... |
| * cfganal.cc: ...here. |
| * cfgbuild.c: Moved to... |
| * cfgbuild.cc: ...here. |
| * cfgcleanup.c: Moved to... |
| * cfgcleanup.cc: ...here. |
| * cfgexpand.c: Moved to... |
| * cfgexpand.cc: ...here. |
| * cfghooks.c: Moved to... |
| * cfghooks.cc: ...here. |
| * cfgloop.c: Moved to... |
| * cfgloop.cc: ...here. |
| * cfgloopanal.c: Moved to... |
| * cfgloopanal.cc: ...here. |
| * cfgloopmanip.c: Moved to... |
| * cfgloopmanip.cc: ...here. |
| * cfgrtl.c: Moved to... |
| * cfgrtl.cc: ...here. |
| * cgraph.c: Moved to... |
| * cgraph.cc: ...here. |
| * cgraphbuild.c: Moved to... |
| * cgraphbuild.cc: ...here. |
| * cgraphclones.c: Moved to... |
| * cgraphclones.cc: ...here. |
| * cgraphunit.c: Moved to... |
| * cgraphunit.cc: ...here. |
| * collect-utils.c: Moved to... |
| * collect-utils.cc: ...here. |
| * collect2-aix.c: Moved to... |
| * collect2-aix.cc: ...here. |
| * collect2.c: Moved to... |
| * collect2.cc: ...here. |
| * combine-stack-adj.c: Moved to... |
| * combine-stack-adj.cc: ...here. |
| * combine.c: Moved to... |
| * combine.cc: ...here. |
| * common/common-targhooks.c: Moved to... |
| * common/common-targhooks.cc: ...here. |
| * common/config/aarch64/aarch64-common.c: Moved to... |
| * common/config/aarch64/aarch64-common.cc: ...here. |
| * common/config/alpha/alpha-common.c: Moved to... |
| * common/config/alpha/alpha-common.cc: ...here. |
| * common/config/arc/arc-common.c: Moved to... |
| * common/config/arc/arc-common.cc: ...here. |
| * common/config/arm/arm-common.c: Moved to... |
| * common/config/arm/arm-common.cc: ...here. |
| * common/config/avr/avr-common.c: Moved to... |
| * common/config/avr/avr-common.cc: ...here. |
| * common/config/bfin/bfin-common.c: Moved to... |
| * common/config/bfin/bfin-common.cc: ...here. |
| * common/config/bpf/bpf-common.c: Moved to... |
| * common/config/bpf/bpf-common.cc: ...here. |
| * common/config/c6x/c6x-common.c: Moved to... |
| * common/config/c6x/c6x-common.cc: ...here. |
| * common/config/cr16/cr16-common.c: Moved to... |
| * common/config/cr16/cr16-common.cc: ...here. |
| * common/config/cris/cris-common.c: Moved to... |
| * common/config/cris/cris-common.cc: ...here. |
| * common/config/csky/csky-common.c: Moved to... |
| * common/config/csky/csky-common.cc: ...here. |
| * common/config/default-common.c: Moved to... |
| * common/config/default-common.cc: ...here. |
| * common/config/epiphany/epiphany-common.c: Moved to... |
| * common/config/epiphany/epiphany-common.cc: ...here. |
| * common/config/fr30/fr30-common.c: Moved to... |
| * common/config/fr30/fr30-common.cc: ...here. |
| * common/config/frv/frv-common.c: Moved to... |
| * common/config/frv/frv-common.cc: ...here. |
| * common/config/gcn/gcn-common.c: Moved to... |
| * common/config/gcn/gcn-common.cc: ...here. |
| * common/config/h8300/h8300-common.c: Moved to... |
| * common/config/h8300/h8300-common.cc: ...here. |
| * common/config/i386/i386-common.c: Moved to... |
| * common/config/i386/i386-common.cc: ...here. |
| * common/config/ia64/ia64-common.c: Moved to... |
| * common/config/ia64/ia64-common.cc: ...here. |
| * common/config/iq2000/iq2000-common.c: Moved to... |
| * common/config/iq2000/iq2000-common.cc: ...here. |
| * common/config/lm32/lm32-common.c: Moved to... |
| * common/config/lm32/lm32-common.cc: ...here. |
| * common/config/m32r/m32r-common.c: Moved to... |
| * common/config/m32r/m32r-common.cc: ...here. |
| * common/config/m68k/m68k-common.c: Moved to... |
| * common/config/m68k/m68k-common.cc: ...here. |
| * common/config/mcore/mcore-common.c: Moved to... |
| * common/config/mcore/mcore-common.cc: ...here. |
| * common/config/microblaze/microblaze-common.c: Moved to... |
| * common/config/microblaze/microblaze-common.cc: ...here. |
| * common/config/mips/mips-common.c: Moved to... |
| * common/config/mips/mips-common.cc: ...here. |
| * common/config/mmix/mmix-common.c: Moved to... |
| * common/config/mmix/mmix-common.cc: ...here. |
| * common/config/mn10300/mn10300-common.c: Moved to... |
| * common/config/mn10300/mn10300-common.cc: ...here. |
| * common/config/msp430/msp430-common.c: Moved to... |
| * common/config/msp430/msp430-common.cc: ...here. |
| * common/config/nds32/nds32-common.c: Moved to... |
| * common/config/nds32/nds32-common.cc: ...here. |
| * common/config/nios2/nios2-common.c: Moved to... |
| * common/config/nios2/nios2-common.cc: ...here. |
| * common/config/nvptx/nvptx-common.c: Moved to... |
| * common/config/nvptx/nvptx-common.cc: ...here. |
| * common/config/or1k/or1k-common.c: Moved to... |
| * common/config/or1k/or1k-common.cc: ...here. |
| * common/config/pa/pa-common.c: Moved to... |
| * common/config/pa/pa-common.cc: ...here. |
| * common/config/pdp11/pdp11-common.c: Moved to... |
| * common/config/pdp11/pdp11-common.cc: ...here. |
| * common/config/pru/pru-common.c: Moved to... |
| * common/config/pru/pru-common.cc: ...here. |
| * common/config/riscv/riscv-common.c: Moved to... |
| * common/config/riscv/riscv-common.cc: ...here. |
| * common/config/rs6000/rs6000-common.c: Moved to... |
| * common/config/rs6000/rs6000-common.cc: ...here. |
| * common/config/rx/rx-common.c: Moved to... |
| * common/config/rx/rx-common.cc: ...here. |
| * common/config/s390/s390-common.c: Moved to... |
| * common/config/s390/s390-common.cc: ...here. |
| * common/config/sh/sh-common.c: Moved to... |
| * common/config/sh/sh-common.cc: ...here. |
| * common/config/sparc/sparc-common.c: Moved to... |
| * common/config/sparc/sparc-common.cc: ...here. |
| * common/config/tilegx/tilegx-common.c: Moved to... |
| * common/config/tilegx/tilegx-common.cc: ...here. |
| * common/config/tilepro/tilepro-common.c: Moved to... |
| * common/config/tilepro/tilepro-common.cc: ...here. |
| * common/config/v850/v850-common.c: Moved to... |
| * common/config/v850/v850-common.cc: ...here. |
| * common/config/vax/vax-common.c: Moved to... |
| * common/config/vax/vax-common.cc: ...here. |
| * common/config/visium/visium-common.c: Moved to... |
| * common/config/visium/visium-common.cc: ...here. |
| * common/config/xstormy16/xstormy16-common.c: Moved to... |
| * common/config/xstormy16/xstormy16-common.cc: ...here. |
| * common/config/xtensa/xtensa-common.c: Moved to... |
| * common/config/xtensa/xtensa-common.cc: ...here. |
| * compare-elim.c: Moved to... |
| * compare-elim.cc: ...here. |
| * config/aarch64/aarch64-bti-insert.c: Moved to... |
| * config/aarch64/aarch64-bti-insert.cc: ...here. |
| * config/aarch64/aarch64-builtins.c: Moved to... |
| * config/aarch64/aarch64-builtins.cc: ...here. |
| * config/aarch64/aarch64-c.c: Moved to... |
| * config/aarch64/aarch64-c.cc: ...here. |
| * config/aarch64/aarch64-d.c: Moved to... |
| * config/aarch64/aarch64-d.cc: ...here. |
| * config/aarch64/aarch64.c: Moved to... |
| * config/aarch64/aarch64.cc: ...here. |
| * config/aarch64/cortex-a57-fma-steering.c: Moved to... |
| * config/aarch64/cortex-a57-fma-steering.cc: ...here. |
| * config/aarch64/driver-aarch64.c: Moved to... |
| * config/aarch64/driver-aarch64.cc: ...here. |
| * config/aarch64/falkor-tag-collision-avoidance.c: Moved to... |
| * config/aarch64/falkor-tag-collision-avoidance.cc: ...here. |
| * config/aarch64/host-aarch64-darwin.c: Moved to... |
| * config/aarch64/host-aarch64-darwin.cc: ...here. |
| * config/alpha/alpha.c: Moved to... |
| * config/alpha/alpha.cc: ...here. |
| * config/alpha/driver-alpha.c: Moved to... |
| * config/alpha/driver-alpha.cc: ...here. |
| * config/arc/arc-c.c: Moved to... |
| * config/arc/arc-c.cc: ...here. |
| * config/arc/arc.c: Moved to... |
| * config/arc/arc.cc: ...here. |
| * config/arc/driver-arc.c: Moved to... |
| * config/arc/driver-arc.cc: ...here. |
| * config/arm/aarch-common.c: Moved to... |
| * config/arm/aarch-common.cc: ...here. |
| * config/arm/arm-builtins.c: Moved to... |
| * config/arm/arm-builtins.cc: ...here. |
| * config/arm/arm-c.c: Moved to... |
| * config/arm/arm-c.cc: ...here. |
| * config/arm/arm-d.c: Moved to... |
| * config/arm/arm-d.cc: ...here. |
| * config/arm/arm.c: Moved to... |
| * config/arm/arm.cc: ...here. |
| * config/arm/driver-arm.c: Moved to... |
| * config/arm/driver-arm.cc: ...here. |
| * config/avr/avr-c.c: Moved to... |
| * config/avr/avr-c.cc: ...here. |
| * config/avr/avr-devices.c: Moved to... |
| * config/avr/avr-devices.cc: ...here. |
| * config/avr/avr-log.c: Moved to... |
| * config/avr/avr-log.cc: ...here. |
| * config/avr/avr.c: Moved to... |
| * config/avr/avr.cc: ...here. |
| * config/avr/driver-avr.c: Moved to... |
| * config/avr/driver-avr.cc: ...here. |
| * config/avr/gen-avr-mmcu-specs.c: Moved to... |
| * config/avr/gen-avr-mmcu-specs.cc: ...here. |
| * config/avr/gen-avr-mmcu-texi.c: Moved to... |
| * config/avr/gen-avr-mmcu-texi.cc: ...here. |
| * config/bfin/bfin.c: Moved to... |
| * config/bfin/bfin.cc: ...here. |
| * config/bpf/bpf.c: Moved to... |
| * config/bpf/bpf.cc: ...here. |
| * config/bpf/coreout.c: Moved to... |
| * config/bpf/coreout.cc: ...here. |
| * config/c6x/c6x.c: Moved to... |
| * config/c6x/c6x.cc: ...here. |
| * config/cr16/cr16.c: Moved to... |
| * config/cr16/cr16.cc: ...here. |
| * config/cris/cris.c: Moved to... |
| * config/cris/cris.cc: ...here. |
| * config/csky/csky.c: Moved to... |
| * config/csky/csky.cc: ...here. |
| * config/darwin-c.c: Moved to... |
| * config/darwin-c.cc: ...here. |
| * config/darwin-d.c: Moved to... |
| * config/darwin-d.cc: ...here. |
| * config/darwin-driver.c: Moved to... |
| * config/darwin-driver.cc: ...here. |
| * config/darwin-f.c: Moved to... |
| * config/darwin-f.cc: ...here. |
| * config/darwin.c: Moved to... |
| * config/darwin.cc: ...here. |
| * config/default-c.c: Moved to... |
| * config/default-c.cc: ...here. |
| * config/default-d.c: Moved to... |
| * config/default-d.cc: ...here. |
| * config/dragonfly-d.c: Moved to... |
| * config/dragonfly-d.cc: ...here. |
| * config/epiphany/epiphany.c: Moved to... |
| * config/epiphany/epiphany.cc: ...here. |
| * config/epiphany/mode-switch-use.c: Moved to... |
| * config/epiphany/mode-switch-use.cc: ...here. |
| * config/epiphany/resolve-sw-modes.c: Moved to... |
| * config/epiphany/resolve-sw-modes.cc: ...here. |
| * config/fr30/fr30.c: Moved to... |
| * config/fr30/fr30.cc: ...here. |
| * config/freebsd-d.c: Moved to... |
| * config/freebsd-d.cc: ...here. |
| * config/frv/frv.c: Moved to... |
| * config/frv/frv.cc: ...here. |
| * config/ft32/ft32.c: Moved to... |
| * config/ft32/ft32.cc: ...here. |
| * config/gcn/driver-gcn.c: Moved to... |
| * config/gcn/driver-gcn.cc: ...here. |
| * config/gcn/gcn-run.c: Moved to... |
| * config/gcn/gcn-run.cc: ...here. |
| * config/gcn/gcn-tree.c: Moved to... |
| * config/gcn/gcn-tree.cc: ...here. |
| * config/gcn/gcn.c: Moved to... |
| * config/gcn/gcn.cc: ...here. |
| * config/gcn/mkoffload.c: Moved to... |
| * config/gcn/mkoffload.cc: ...here. |
| * config/glibc-c.c: Moved to... |
| * config/glibc-c.cc: ...here. |
| * config/glibc-d.c: Moved to... |
| * config/glibc-d.cc: ...here. |
| * config/h8300/h8300.c: Moved to... |
| * config/h8300/h8300.cc: ...here. |
| * config/host-darwin.c: Moved to... |
| * config/host-darwin.cc: ...here. |
| * config/host-hpux.c: Moved to... |
| * config/host-hpux.cc: ...here. |
| * config/host-linux.c: Moved to... |
| * config/host-linux.cc: ...here. |
| * config/host-netbsd.c: Moved to... |
| * config/host-netbsd.cc: ...here. |
| * config/host-openbsd.c: Moved to... |
| * config/host-openbsd.cc: ...here. |
| * config/host-solaris.c: Moved to... |
| * config/host-solaris.cc: ...here. |
| * config/i386/djgpp.c: Moved to... |
| * config/i386/djgpp.cc: ...here. |
| * config/i386/driver-i386.c: Moved to... |
| * config/i386/driver-i386.cc: ...here. |
| * config/i386/driver-mingw32.c: Moved to... |
| * config/i386/driver-mingw32.cc: ...here. |
| * config/i386/gnu-property.c: Moved to... |
| * config/i386/gnu-property.cc: ...here. |
| * config/i386/host-cygwin.c: Moved to... |
| * config/i386/host-cygwin.cc: ...here. |
| * config/i386/host-i386-darwin.c: Moved to... |
| * config/i386/host-i386-darwin.cc: ...here. |
| * config/i386/host-mingw32.c: Moved to... |
| * config/i386/host-mingw32.cc: ...here. |
| * config/i386/i386-builtins.c: Moved to... |
| * config/i386/i386-builtins.cc: ...here. |
| * config/i386/i386-c.c: Moved to... |
| * config/i386/i386-c.cc: ...here. |
| * config/i386/i386-d.c: Moved to... |
| * config/i386/i386-d.cc: ...here. |
| * config/i386/i386-expand.c: Moved to... |
| * config/i386/i386-expand.cc: ...here. |
| * config/i386/i386-features.c: Moved to... |
| * config/i386/i386-features.cc: ...here. |
| * config/i386/i386-options.c: Moved to... |
| * config/i386/i386-options.cc: ...here. |
| * config/i386/i386.c: Moved to... |
| * config/i386/i386.cc: ...here. |
| * config/i386/intelmic-mkoffload.c: Moved to... |
| * config/i386/intelmic-mkoffload.cc: ...here. |
| * config/i386/msformat-c.c: Moved to... |
| * config/i386/msformat-c.cc: ...here. |
| * config/i386/winnt-cxx.c: Moved to... |
| * config/i386/winnt-cxx.cc: ...here. |
| * config/i386/winnt-d.c: Moved to... |
| * config/i386/winnt-d.cc: ...here. |
| * config/i386/winnt-stubs.c: Moved to... |
| * config/i386/winnt-stubs.cc: ...here. |
| * config/i386/winnt.c: Moved to... |
| * config/i386/winnt.cc: ...here. |
| * config/i386/x86-tune-sched-atom.c: Moved to... |
| * config/i386/x86-tune-sched-atom.cc: ...here. |
| * config/i386/x86-tune-sched-bd.c: Moved to... |
| * config/i386/x86-tune-sched-bd.cc: ...here. |
| * config/i386/x86-tune-sched-core.c: Moved to... |
| * config/i386/x86-tune-sched-core.cc: ...here. |
| * config/i386/x86-tune-sched.c: Moved to... |
| * config/i386/x86-tune-sched.cc: ...here. |
| * config/ia64/ia64-c.c: Moved to... |
| * config/ia64/ia64-c.cc: ...here. |
| * config/ia64/ia64.c: Moved to... |
| * config/ia64/ia64.cc: ...here. |
| * config/iq2000/iq2000.c: Moved to... |
| * config/iq2000/iq2000.cc: ...here. |
| * config/linux.c: Moved to... |
| * config/linux.cc: ...here. |
| * config/lm32/lm32.c: Moved to... |
| * config/lm32/lm32.cc: ...here. |
| * config/m32c/m32c-pragma.c: Moved to... |
| * config/m32c/m32c-pragma.cc: ...here. |
| * config/m32c/m32c.c: Moved to... |
| * config/m32c/m32c.cc: ...here. |
| * config/m32r/m32r.c: Moved to... |
| * config/m32r/m32r.cc: ...here. |
| * config/m68k/m68k.c: Moved to... |
| * config/m68k/m68k.cc: ...here. |
| * config/mcore/mcore.c: Moved to... |
| * config/mcore/mcore.cc: ...here. |
| * config/microblaze/microblaze-c.c: Moved to... |
| * config/microblaze/microblaze-c.cc: ...here. |
| * config/microblaze/microblaze.c: Moved to... |
| * config/microblaze/microblaze.cc: ...here. |
| * config/mips/driver-native.c: Moved to... |
| * config/mips/driver-native.cc: ...here. |
| * config/mips/frame-header-opt.c: Moved to... |
| * config/mips/frame-header-opt.cc: ...here. |
| * config/mips/mips-d.c: Moved to... |
| * config/mips/mips-d.cc: ...here. |
| * config/mips/mips.c: Moved to... |
| * config/mips/mips.cc: ...here. |
| * config/mmix/mmix.c: Moved to... |
| * config/mmix/mmix.cc: ...here. |
| * config/mn10300/mn10300.c: Moved to... |
| * config/mn10300/mn10300.cc: ...here. |
| * config/moxie/moxie.c: Moved to... |
| * config/moxie/moxie.cc: ...here. |
| * config/msp430/driver-msp430.c: Moved to... |
| * config/msp430/driver-msp430.cc: ...here. |
| * config/msp430/msp430-c.c: Moved to... |
| * config/msp430/msp430-c.cc: ...here. |
| * config/msp430/msp430-devices.c: Moved to... |
| * config/msp430/msp430-devices.cc: ...here. |
| * config/msp430/msp430.c: Moved to... |
| * config/msp430/msp430.cc: ...here. |
| * config/nds32/nds32-cost.c: Moved to... |
| * config/nds32/nds32-cost.cc: ...here. |
| * config/nds32/nds32-fp-as-gp.c: Moved to... |
| * config/nds32/nds32-fp-as-gp.cc: ...here. |
| * config/nds32/nds32-intrinsic.c: Moved to... |
| * config/nds32/nds32-intrinsic.cc: ...here. |
| * config/nds32/nds32-isr.c: Moved to... |
| * config/nds32/nds32-isr.cc: ...here. |
| * config/nds32/nds32-md-auxiliary.c: Moved to... |
| * config/nds32/nds32-md-auxiliary.cc: ...here. |
| * config/nds32/nds32-memory-manipulation.c: Moved to... |
| * config/nds32/nds32-memory-manipulation.cc: ...here. |
| * config/nds32/nds32-pipelines-auxiliary.c: Moved to... |
| * config/nds32/nds32-pipelines-auxiliary.cc: ...here. |
| * config/nds32/nds32-predicates.c: Moved to... |
| * config/nds32/nds32-predicates.cc: ...here. |
| * config/nds32/nds32-relax-opt.c: Moved to... |
| * config/nds32/nds32-relax-opt.cc: ...here. |
| * config/nds32/nds32-utils.c: Moved to... |
| * config/nds32/nds32-utils.cc: ...here. |
| * config/nds32/nds32.c: Moved to... |
| * config/nds32/nds32.cc: ...here. |
| * config/netbsd-d.c: Moved to... |
| * config/netbsd-d.cc: ...here. |
| * config/netbsd.c: Moved to... |
| * config/netbsd.cc: ...here. |
| * config/nios2/nios2.c: Moved to... |
| * config/nios2/nios2.cc: ...here. |
| * config/nvptx/mkoffload.c: Moved to... |
| * config/nvptx/mkoffload.cc: ...here. |
| * config/nvptx/nvptx-c.c: Moved to... |
| * config/nvptx/nvptx-c.cc: ...here. |
| * config/nvptx/nvptx.c: Moved to... |
| * config/nvptx/nvptx.cc: ...here. |
| * config/openbsd-d.c: Moved to... |
| * config/openbsd-d.cc: ...here. |
| * config/or1k/or1k.c: Moved to... |
| * config/or1k/or1k.cc: ...here. |
| * config/pa/pa-d.c: Moved to... |
| * config/pa/pa-d.cc: ...here. |
| * config/pa/pa.c: Moved to... |
| * config/pa/pa.cc: ...here. |
| * config/pdp11/pdp11.c: Moved to... |
| * config/pdp11/pdp11.cc: ...here. |
| * config/pru/pru-passes.c: Moved to... |
| * config/pru/pru-passes.cc: ...here. |
| * config/pru/pru-pragma.c: Moved to... |
| * config/pru/pru-pragma.cc: ...here. |
| * config/pru/pru.c: Moved to... |
| * config/pru/pru.cc: ...here. |
| * config/riscv/riscv-builtins.c: Moved to... |
| * config/riscv/riscv-builtins.cc: ...here. |
| * config/riscv/riscv-c.c: Moved to... |
| * config/riscv/riscv-c.cc: ...here. |
| * config/riscv/riscv-d.c: Moved to... |
| * config/riscv/riscv-d.cc: ...here. |
| * config/riscv/riscv-shorten-memrefs.c: Moved to... |
| * config/riscv/riscv-shorten-memrefs.cc: ...here. |
| * config/riscv/riscv-sr.c: Moved to... |
| * config/riscv/riscv-sr.cc: ...here. |
| * config/riscv/riscv.c: Moved to... |
| * config/riscv/riscv.cc: ...here. |
| * config/rl78/rl78-c.c: Moved to... |
| * config/rl78/rl78-c.cc: ...here. |
| * config/rl78/rl78.c: Moved to... |
| * config/rl78/rl78.cc: ...here. |
| * config/rs6000/driver-rs6000.c: Moved to... |
| * config/rs6000/driver-rs6000.cc: ...here. |
| * config/rs6000/host-darwin.c: Moved to... |
| * config/rs6000/host-darwin.cc: ...here. |
| * config/rs6000/host-ppc64-darwin.c: Moved to... |
| * config/rs6000/host-ppc64-darwin.cc: ...here. |
| * config/rs6000/rbtree.c: Moved to... |
| * config/rs6000/rbtree.cc: ...here. |
| * config/rs6000/rs6000-c.c: Moved to... |
| * config/rs6000/rs6000-c.cc: ...here. |
| * config/rs6000/rs6000-call.c: Moved to... |
| * config/rs6000/rs6000-call.cc: ...here. |
| * config/rs6000/rs6000-d.c: Moved to... |
| * config/rs6000/rs6000-d.cc: ...here. |
| * config/rs6000/rs6000-gen-builtins.c: Moved to... |
| * config/rs6000/rs6000-gen-builtins.cc: ...here. |
| * config/rs6000/rs6000-linux.c: Moved to... |
| * config/rs6000/rs6000-linux.cc: ...here. |
| * config/rs6000/rs6000-logue.c: Moved to... |
| * config/rs6000/rs6000-logue.cc: ...here. |
| * config/rs6000/rs6000-p8swap.c: Moved to... |
| * config/rs6000/rs6000-p8swap.cc: ...here. |
| * config/rs6000/rs6000-pcrel-opt.c: Moved to... |
| * config/rs6000/rs6000-pcrel-opt.cc: ...here. |
| * config/rs6000/rs6000-string.c: Moved to... |
| * config/rs6000/rs6000-string.cc: ...here. |
| * config/rs6000/rs6000.c: Moved to... |
| * config/rs6000/rs6000.cc: ...here. |
| * config/rx/rx.c: Moved to... |
| * config/rx/rx.cc: ...here. |
| * config/s390/driver-native.c: Moved to... |
| * config/s390/driver-native.cc: ...here. |
| * config/s390/s390-c.c: Moved to... |
| * config/s390/s390-c.cc: ...here. |
| * config/s390/s390-d.c: Moved to... |
| * config/s390/s390-d.cc: ...here. |
| * config/s390/s390.c: Moved to... |
| * config/s390/s390.cc: ...here. |
| * config/sh/divtab-sh4-300.c: Moved to... |
| * config/sh/divtab-sh4-300.cc: ...here. |
| * config/sh/divtab-sh4.c: Moved to... |
| * config/sh/divtab-sh4.cc: ...here. |
| * config/sh/divtab.c: Moved to... |
| * config/sh/divtab.cc: ...here. |
| * config/sh/sh-c.c: Moved to... |
| * config/sh/sh-c.cc: ...here. |
| * config/sh/sh.c: Moved to... |
| * config/sh/sh.cc: ...here. |
| * config/sol2-c.c: Moved to... |
| * config/sol2-c.cc: ...here. |
| * config/sol2-cxx.c: Moved to... |
| * config/sol2-cxx.cc: ...here. |
| * config/sol2-d.c: Moved to... |
| * config/sol2-d.cc: ...here. |
| * config/sol2-stubs.c: Moved to... |
| * config/sol2-stubs.cc: ...here. |
| * config/sol2.c: Moved to... |
| * config/sol2.cc: ...here. |
| * config/sparc/driver-sparc.c: Moved to... |
| * config/sparc/driver-sparc.cc: ...here. |
| * config/sparc/sparc-c.c: Moved to... |
| * config/sparc/sparc-c.cc: ...here. |
| * config/sparc/sparc-d.c: Moved to... |
| * config/sparc/sparc-d.cc: ...here. |
| * config/sparc/sparc.c: Moved to... |
| * config/sparc/sparc.cc: ...here. |
| * config/stormy16/stormy16.c: Moved to... |
| * config/stormy16/stormy16.cc: ...here. |
| * config/tilegx/mul-tables.c: Moved to... |
| * config/tilegx/mul-tables.cc: ...here. |
| * config/tilegx/tilegx-c.c: Moved to... |
| * config/tilegx/tilegx-c.cc: ...here. |
| * config/tilegx/tilegx.c: Moved to... |
| * config/tilegx/tilegx.cc: ...here. |
| * config/tilepro/mul-tables.c: Moved to... |
| * config/tilepro/mul-tables.cc: ...here. |
| * config/tilepro/tilepro-c.c: Moved to... |
| * config/tilepro/tilepro-c.cc: ...here. |
| * config/tilepro/tilepro.c: Moved to... |
| * config/tilepro/tilepro.cc: ...here. |
| * config/v850/v850-c.c: Moved to... |
| * config/v850/v850-c.cc: ...here. |
| * config/v850/v850.c: Moved to... |
| * config/v850/v850.cc: ...here. |
| * config/vax/vax.c: Moved to... |
| * config/vax/vax.cc: ...here. |
| * config/visium/visium.c: Moved to... |
| * config/visium/visium.cc: ...here. |
| * config/vms/vms-c.c: Moved to... |
| * config/vms/vms-c.cc: ...here. |
| * config/vms/vms-f.c: Moved to... |
| * config/vms/vms-f.cc: ...here. |
| * config/vms/vms.c: Moved to... |
| * config/vms/vms.cc: ...here. |
| * config/vxworks-c.c: Moved to... |
| * config/vxworks-c.cc: ...here. |
| * config/vxworks.c: Moved to... |
| * config/vxworks.cc: ...here. |
| * config/winnt-c.c: Moved to... |
| * config/winnt-c.cc: ...here. |
| * config/xtensa/xtensa.c: Moved to... |
| * config/xtensa/xtensa.cc: ...here. |
| * context.c: Moved to... |
| * context.cc: ...here. |
| * convert.c: Moved to... |
| * convert.cc: ...here. |
| * coverage.c: Moved to... |
| * coverage.cc: ...here. |
| * cppbuiltin.c: Moved to... |
| * cppbuiltin.cc: ...here. |
| * cppdefault.c: Moved to... |
| * cppdefault.cc: ...here. |
| * cprop.c: Moved to... |
| * cprop.cc: ...here. |
| * cse.c: Moved to... |
| * cse.cc: ...here. |
| * cselib.c: Moved to... |
| * cselib.cc: ...here. |
| * ctfc.c: Moved to... |
| * ctfc.cc: ...here. |
| * ctfout.c: Moved to... |
| * ctfout.cc: ...here. |
| * data-streamer-in.c: Moved to... |
| * data-streamer-in.cc: ...here. |
| * data-streamer-out.c: Moved to... |
| * data-streamer-out.cc: ...here. |
| * data-streamer.c: Moved to... |
| * data-streamer.cc: ...here. |
| * dbgcnt.c: Moved to... |
| * dbgcnt.cc: ...here. |
| * dbxout.c: Moved to... |
| * dbxout.cc: ...here. |
| * dce.c: Moved to... |
| * dce.cc: ...here. |
| * ddg.c: Moved to... |
| * ddg.cc: ...here. |
| * debug.c: Moved to... |
| * debug.cc: ...here. |
| * df-core.c: Moved to... |
| * df-core.cc: ...here. |
| * df-problems.c: Moved to... |
| * df-problems.cc: ...here. |
| * df-scan.c: Moved to... |
| * df-scan.cc: ...here. |
| * dfp.c: Moved to... |
| * dfp.cc: ...here. |
| * diagnostic-color.c: Moved to... |
| * diagnostic-color.cc: ...here. |
| * diagnostic-show-locus.c: Moved to... |
| * diagnostic-show-locus.cc: ...here. |
| * diagnostic-spec.c: Moved to... |
| * diagnostic-spec.cc: ...here. |
| * diagnostic.c: Moved to... |
| * diagnostic.cc: ...here. |
| * dojump.c: Moved to... |
| * dojump.cc: ...here. |
| * dominance.c: Moved to... |
| * dominance.cc: ...here. |
| * domwalk.c: Moved to... |
| * domwalk.cc: ...here. |
| * double-int.c: Moved to... |
| * double-int.cc: ...here. |
| * dse.c: Moved to... |
| * dse.cc: ...here. |
| * dumpfile.c: Moved to... |
| * dumpfile.cc: ...here. |
| * dwarf2asm.c: Moved to... |
| * dwarf2asm.cc: ...here. |
| * dwarf2cfi.c: Moved to... |
| * dwarf2cfi.cc: ...here. |
| * dwarf2ctf.c: Moved to... |
| * dwarf2ctf.cc: ...here. |
| * dwarf2out.c: Moved to... |
| * dwarf2out.cc: ...here. |
| * early-remat.c: Moved to... |
| * early-remat.cc: ...here. |
| * edit-context.c: Moved to... |
| * edit-context.cc: ...here. |
| * emit-rtl.c: Moved to... |
| * emit-rtl.cc: ...here. |
| * errors.c: Moved to... |
| * errors.cc: ...here. |
| * et-forest.c: Moved to... |
| * et-forest.cc: ...here. |
| * except.c: Moved to... |
| * except.cc: ...here. |
| * explow.c: Moved to... |
| * explow.cc: ...here. |
| * expmed.c: Moved to... |
| * expmed.cc: ...here. |
| * expr.c: Moved to... |
| * expr.cc: ...here. |
| * fibonacci_heap.c: Moved to... |
| * fibonacci_heap.cc: ...here. |
| * file-find.c: Moved to... |
| * file-find.cc: ...here. |
| * file-prefix-map.c: Moved to... |
| * file-prefix-map.cc: ...here. |
| * final.c: Moved to... |
| * final.cc: ...here. |
| * fixed-value.c: Moved to... |
| * fixed-value.cc: ...here. |
| * fold-const-call.c: Moved to... |
| * fold-const-call.cc: ...here. |
| * fold-const.c: Moved to... |
| * fold-const.cc: ...here. |
| * fp-test.c: Moved to... |
| * fp-test.cc: ...here. |
| * function-tests.c: Moved to... |
| * function-tests.cc: ...here. |
| * function.c: Moved to... |
| * function.cc: ...here. |
| * fwprop.c: Moved to... |
| * fwprop.cc: ...here. |
| * gcc-ar.c: Moved to... |
| * gcc-ar.cc: ...here. |
| * gcc-main.c: Moved to... |
| * gcc-main.cc: ...here. |
| * gcc-rich-location.c: Moved to... |
| * gcc-rich-location.cc: ...here. |
| * gcc.c: Moved to... |
| * gcc.cc: ...here. |
| * gcov-dump.c: Moved to... |
| * gcov-dump.cc: ...here. |
| * gcov-io.c: Moved to... |
| * gcov-io.cc: ...here. |
| * gcov-tool.c: Moved to... |
| * gcov-tool.cc: ...here. |
| * gcov.c: Moved to... |
| * gcov.cc: ...here. |
| * gcse-common.c: Moved to... |
| * gcse-common.cc: ...here. |
| * gcse.c: Moved to... |
| * gcse.cc: ...here. |
| * genattr-common.c: Moved to... |
| * genattr-common.cc: ...here. |
| * genattr.c: Moved to... |
| * genattr.cc: ...here. |
| * genattrtab.c: Moved to... |
| * genattrtab.cc: ...here. |
| * genautomata.c: Moved to... |
| * genautomata.cc: ...here. |
| * gencfn-macros.c: Moved to... |
| * gencfn-macros.cc: ...here. |
| * gencheck.c: Moved to... |
| * gencheck.cc: ...here. |
| * genchecksum.c: Moved to... |
| * genchecksum.cc: ...here. |
| * gencodes.c: Moved to... |
| * gencodes.cc: ...here. |
| * genconditions.c: Moved to... |
| * genconditions.cc: ...here. |
| * genconfig.c: Moved to... |
| * genconfig.cc: ...here. |
| * genconstants.c: Moved to... |
| * genconstants.cc: ...here. |
| * genemit.c: Moved to... |
| * genemit.cc: ...here. |
| * genenums.c: Moved to... |
| * genenums.cc: ...here. |
| * generic-match-head.c: Moved to... |
| * generic-match-head.cc: ...here. |
| * genextract.c: Moved to... |
| * genextract.cc: ...here. |
| * genflags.c: Moved to... |
| * genflags.cc: ...here. |
| * gengenrtl.c: Moved to... |
| * gengenrtl.cc: ...here. |
| * gengtype-parse.c: Moved to... |
| * gengtype-parse.cc: ...here. |
| * gengtype-state.c: Moved to... |
| * gengtype-state.cc: ...here. |
| * gengtype.c: Moved to... |
| * gengtype.cc: ...here. |
| * genhooks.c: Moved to... |
| * genhooks.cc: ...here. |
| * genmatch.c: Moved to... |
| * genmatch.cc: ...here. |
| * genmddeps.c: Moved to... |
| * genmddeps.cc: ...here. |
| * genmddump.c: Moved to... |
| * genmddump.cc: ...here. |
| * genmodes.c: Moved to... |
| * genmodes.cc: ...here. |
| * genopinit.c: Moved to... |
| * genopinit.cc: ...here. |
| * genoutput.c: Moved to... |
| * genoutput.cc: ...here. |
| * genpeep.c: Moved to... |
| * genpeep.cc: ...here. |
| * genpreds.c: Moved to... |
| * genpreds.cc: ...here. |
| * genrecog.c: Moved to... |
| * genrecog.cc: ...here. |
| * gensupport.c: Moved to... |
| * gensupport.cc: ...here. |
| * gentarget-def.c: Moved to... |
| * gentarget-def.cc: ...here. |
| * genversion.c: Moved to... |
| * genversion.cc: ...here. |
| * ggc-common.c: Moved to... |
| * ggc-common.cc: ...here. |
| * ggc-none.c: Moved to... |
| * ggc-none.cc: ...here. |
| * ggc-page.c: Moved to... |
| * ggc-page.cc: ...here. |
| * ggc-tests.c: Moved to... |
| * ggc-tests.cc: ...here. |
| * gimple-builder.c: Moved to... |
| * gimple-builder.cc: ...here. |
| * gimple-expr.c: Moved to... |
| * gimple-expr.cc: ...here. |
| * gimple-fold.c: Moved to... |
| * gimple-fold.cc: ...here. |
| * gimple-iterator.c: Moved to... |
| * gimple-iterator.cc: ...here. |
| * gimple-laddress.c: Moved to... |
| * gimple-laddress.cc: ...here. |
| * gimple-loop-jam.c: Moved to... |
| * gimple-loop-jam.cc: ...here. |
| * gimple-low.c: Moved to... |
| * gimple-low.cc: ...here. |
| * gimple-match-head.c: Moved to... |
| * gimple-match-head.cc: ...here. |
| * gimple-pretty-print.c: Moved to... |
| * gimple-pretty-print.cc: ...here. |
| * gimple-ssa-backprop.c: Moved to... |
| * gimple-ssa-backprop.cc: ...here. |
| * gimple-ssa-evrp-analyze.c: Moved to... |
| * gimple-ssa-evrp-analyze.cc: ...here. |
| * gimple-ssa-evrp.c: Moved to... |
| * gimple-ssa-evrp.cc: ...here. |
| * gimple-ssa-isolate-paths.c: Moved to... |
| * gimple-ssa-isolate-paths.cc: ...here. |
| * gimple-ssa-nonnull-compare.c: Moved to... |
| * gimple-ssa-nonnull-compare.cc: ...here. |
| * gimple-ssa-split-paths.c: Moved to... |
| * gimple-ssa-split-paths.cc: ...here. |
| * gimple-ssa-sprintf.c: Moved to... |
| * gimple-ssa-sprintf.cc: ...here. |
| * gimple-ssa-store-merging.c: Moved to... |
| * gimple-ssa-store-merging.cc: ...here. |
| * gimple-ssa-strength-reduction.c: Moved to... |
| * gimple-ssa-strength-reduction.cc: ...here. |
| * gimple-ssa-warn-alloca.c: Moved to... |
| * gimple-ssa-warn-alloca.cc: ...here. |
| * gimple-ssa-warn-restrict.c: Moved to... |
| * gimple-ssa-warn-restrict.cc: ...here. |
| * gimple-streamer-in.c: Moved to... |
| * gimple-streamer-in.cc: ...here. |
| * gimple-streamer-out.c: Moved to... |
| * gimple-streamer-out.cc: ...here. |
| * gimple-walk.c: Moved to... |
| * gimple-walk.cc: ...here. |
| * gimple-warn-recursion.c: Moved to... |
| * gimple-warn-recursion.cc: ...here. |
| * gimple.c: Moved to... |
| * gimple.cc: ...here. |
| * gimplify-me.c: Moved to... |
| * gimplify-me.cc: ...here. |
| * gimplify.c: Moved to... |
| * gimplify.cc: ...here. |
| * godump.c: Moved to... |
| * godump.cc: ...here. |
| * graph.c: Moved to... |
| * graph.cc: ...here. |
| * graphds.c: Moved to... |
| * graphds.cc: ...here. |
| * graphite-dependences.c: Moved to... |
| * graphite-dependences.cc: ...here. |
| * graphite-isl-ast-to-gimple.c: Moved to... |
| * graphite-isl-ast-to-gimple.cc: ...here. |
| * graphite-optimize-isl.c: Moved to... |
| * graphite-optimize-isl.cc: ...here. |
| * graphite-poly.c: Moved to... |
| * graphite-poly.cc: ...here. |
| * graphite-scop-detection.c: Moved to... |
| * graphite-scop-detection.cc: ...here. |
| * graphite-sese-to-poly.c: Moved to... |
| * graphite-sese-to-poly.cc: ...here. |
| * graphite.c: Moved to... |
| * graphite.cc: ...here. |
| * haifa-sched.c: Moved to... |
| * haifa-sched.cc: ...here. |
| * hash-map-tests.c: Moved to... |
| * hash-map-tests.cc: ...here. |
| * hash-set-tests.c: Moved to... |
| * hash-set-tests.cc: ...here. |
| * hash-table.c: Moved to... |
| * hash-table.cc: ...here. |
| * hooks.c: Moved to... |
| * hooks.cc: ...here. |
| * host-default.c: Moved to... |
| * host-default.cc: ...here. |
| * hw-doloop.c: Moved to... |
| * hw-doloop.cc: ...here. |
| * hwint.c: Moved to... |
| * hwint.cc: ...here. |
| * ifcvt.c: Moved to... |
| * ifcvt.cc: ...here. |
| * inchash.c: Moved to... |
| * inchash.cc: ...here. |
| * incpath.c: Moved to... |
| * incpath.cc: ...here. |
| * init-regs.c: Moved to... |
| * init-regs.cc: ...here. |
| * input.c: Moved to... |
| * input.cc: ...here. |
| * internal-fn.c: Moved to... |
| * internal-fn.cc: ...here. |
| * intl.c: Moved to... |
| * intl.cc: ...here. |
| * ipa-comdats.c: Moved to... |
| * ipa-comdats.cc: ...here. |
| * ipa-cp.c: Moved to... |
| * ipa-cp.cc: ...here. |
| * ipa-devirt.c: Moved to... |
| * ipa-devirt.cc: ...here. |
| * ipa-fnsummary.c: Moved to... |
| * ipa-fnsummary.cc: ...here. |
| * ipa-icf-gimple.c: Moved to... |
| * ipa-icf-gimple.cc: ...here. |
| * ipa-icf.c: Moved to... |
| * ipa-icf.cc: ...here. |
| * ipa-inline-analysis.c: Moved to... |
| * ipa-inline-analysis.cc: ...here. |
| * ipa-inline-transform.c: Moved to... |
| * ipa-inline-transform.cc: ...here. |
| * ipa-inline.c: Moved to... |
| * ipa-inline.cc: ...here. |
| * ipa-modref-tree.c: Moved to... |
| * ipa-modref-tree.cc: ...here. |
| * ipa-modref.c: Moved to... |
| * ipa-modref.cc: ...here. |
| * ipa-param-manipulation.c: Moved to... |
| * ipa-param-manipulation.cc: ...here. |
| * ipa-polymorphic-call.c: Moved to... |
| * ipa-polymorphic-call.cc: ...here. |
| * ipa-predicate.c: Moved to... |
| * ipa-predicate.cc: ...here. |
| * ipa-profile.c: Moved to... |
| * ipa-profile.cc: ...here. |
| * ipa-prop.c: Moved to... |
| * ipa-prop.cc: ...here. |
| * ipa-pure-const.c: Moved to... |
| * ipa-pure-const.cc: ...here. |
| * ipa-ref.c: Moved to... |
| * ipa-ref.cc: ...here. |
| * ipa-reference.c: Moved to... |
| * ipa-reference.cc: ...here. |
| * ipa-split.c: Moved to... |
| * ipa-split.cc: ...here. |
| * ipa-sra.c: Moved to... |
| * ipa-sra.cc: ...here. |
| * ipa-utils.c: Moved to... |
| * ipa-utils.cc: ...here. |
| * ipa-visibility.c: Moved to... |
| * ipa-visibility.cc: ...here. |
| * ipa.c: Moved to... |
| * ipa.cc: ...here. |
| * ira-build.c: Moved to... |
| * ira-build.cc: ...here. |
| * ira-color.c: Moved to... |
| * ira-color.cc: ...here. |
| * ira-conflicts.c: Moved to... |
| * ira-conflicts.cc: ...here. |
| * ira-costs.c: Moved to... |
| * ira-costs.cc: ...here. |
| * ira-emit.c: Moved to... |
| * ira-emit.cc: ...here. |
| * ira-lives.c: Moved to... |
| * ira-lives.cc: ...here. |
| * ira.c: Moved to... |
| * ira.cc: ...here. |
| * jump.c: Moved to... |
| * jump.cc: ...here. |
| * langhooks.c: Moved to... |
| * langhooks.cc: ...here. |
| * lcm.c: Moved to... |
| * lcm.cc: ...here. |
| * lists.c: Moved to... |
| * lists.cc: ...here. |
| * loop-doloop.c: Moved to... |
| * loop-doloop.cc: ...here. |
| * loop-init.c: Moved to... |
| * loop-init.cc: ...here. |
| * loop-invariant.c: Moved to... |
| * loop-invariant.cc: ...here. |
| * loop-iv.c: Moved to... |
| * loop-iv.cc: ...here. |
| * loop-unroll.c: Moved to... |
| * loop-unroll.cc: ...here. |
| * lower-subreg.c: Moved to... |
| * lower-subreg.cc: ...here. |
| * lra-assigns.c: Moved to... |
| * lra-assigns.cc: ...here. |
| * lra-coalesce.c: Moved to... |
| * lra-coalesce.cc: ...here. |
| * lra-constraints.c: Moved to... |
| * lra-constraints.cc: ...here. |
| * lra-eliminations.c: Moved to... |
| * lra-eliminations.cc: ...here. |
| * lra-lives.c: Moved to... |
| * lra-lives.cc: ...here. |
| * lra-remat.c: Moved to... |
| * lra-remat.cc: ...here. |
| * lra-spills.c: Moved to... |
| * lra-spills.cc: ...here. |
| * lra.c: Moved to... |
| * lra.cc: ...here. |
| * lto-cgraph.c: Moved to... |
| * lto-cgraph.cc: ...here. |
| * lto-compress.c: Moved to... |
| * lto-compress.cc: ...here. |
| * lto-opts.c: Moved to... |
| * lto-opts.cc: ...here. |
| * lto-section-in.c: Moved to... |
| * lto-section-in.cc: ...here. |
| * lto-section-out.c: Moved to... |
| * lto-section-out.cc: ...here. |
| * lto-streamer-in.c: Moved to... |
| * lto-streamer-in.cc: ...here. |
| * lto-streamer-out.c: Moved to... |
| * lto-streamer-out.cc: ...here. |
| * lto-streamer.c: Moved to... |
| * lto-streamer.cc: ...here. |
| * lto-wrapper.c: Moved to... |
| * lto-wrapper.cc: ...here. |
| * main.c: Moved to... |
| * main.cc: ...here. |
| * mcf.c: Moved to... |
| * mcf.cc: ...here. |
| * mode-switching.c: Moved to... |
| * mode-switching.cc: ...here. |
| * modulo-sched.c: Moved to... |
| * modulo-sched.cc: ...here. |
| * multiple_target.c: Moved to... |
| * multiple_target.cc: ...here. |
| * omp-expand.c: Moved to... |
| * omp-expand.cc: ...here. |
| * omp-general.c: Moved to... |
| * omp-general.cc: ...here. |
| * omp-low.c: Moved to... |
| * omp-low.cc: ...here. |
| * omp-offload.c: Moved to... |
| * omp-offload.cc: ...here. |
| * omp-simd-clone.c: Moved to... |
| * omp-simd-clone.cc: ...here. |
| * opt-suggestions.c: Moved to... |
| * opt-suggestions.cc: ...here. |
| * optabs-libfuncs.c: Moved to... |
| * optabs-libfuncs.cc: ...here. |
| * optabs-query.c: Moved to... |
| * optabs-query.cc: ...here. |
| * optabs-tree.c: Moved to... |
| * optabs-tree.cc: ...here. |
| * optabs.c: Moved to... |
| * optabs.cc: ...here. |
| * opts-common.c: Moved to... |
| * opts-common.cc: ...here. |
| * opts-global.c: Moved to... |
| * opts-global.cc: ...here. |
| * opts.c: Moved to... |
| * opts.cc: ...here. |
| * passes.c: Moved to... |
| * passes.cc: ...here. |
| * plugin.c: Moved to... |
| * plugin.cc: ...here. |
| * postreload-gcse.c: Moved to... |
| * postreload-gcse.cc: ...here. |
| * postreload.c: Moved to... |
| * postreload.cc: ...here. |
| * predict.c: Moved to... |
| * predict.cc: ...here. |
| * prefix.c: Moved to... |
| * prefix.cc: ...here. |
| * pretty-print.c: Moved to... |
| * pretty-print.cc: ...here. |
| * print-rtl-function.c: Moved to... |
| * print-rtl-function.cc: ...here. |
| * print-rtl.c: Moved to... |
| * print-rtl.cc: ...here. |
| * print-tree.c: Moved to... |
| * print-tree.cc: ...here. |
| * profile-count.c: Moved to... |
| * profile-count.cc: ...here. |
| * profile.c: Moved to... |
| * profile.cc: ...here. |
| * read-md.c: Moved to... |
| * read-md.cc: ...here. |
| * read-rtl-function.c: Moved to... |
| * read-rtl-function.cc: ...here. |
| * read-rtl.c: Moved to... |
| * read-rtl.cc: ...here. |
| * real.c: Moved to... |
| * real.cc: ...here. |
| * realmpfr.c: Moved to... |
| * realmpfr.cc: ...here. |
| * recog.c: Moved to... |
| * recog.cc: ...here. |
| * ree.c: Moved to... |
| * ree.cc: ...here. |
| * reg-stack.c: Moved to... |
| * reg-stack.cc: ...here. |
| * regcprop.c: Moved to... |
| * regcprop.cc: ...here. |
| * reginfo.c: Moved to... |
| * reginfo.cc: ...here. |
| * regrename.c: Moved to... |
| * regrename.cc: ...here. |
| * regstat.c: Moved to... |
| * regstat.cc: ...here. |
| * reload.c: Moved to... |
| * reload.cc: ...here. |
| * reload1.c: Moved to... |
| * reload1.cc: ...here. |
| * reorg.c: Moved to... |
| * reorg.cc: ...here. |
| * resource.c: Moved to... |
| * resource.cc: ...here. |
| * rtl-error.c: Moved to... |
| * rtl-error.cc: ...here. |
| * rtl-tests.c: Moved to... |
| * rtl-tests.cc: ...here. |
| * rtl.c: Moved to... |
| * rtl.cc: ...here. |
| * rtlanal.c: Moved to... |
| * rtlanal.cc: ...here. |
| * rtlhash.c: Moved to... |
| * rtlhash.cc: ...here. |
| * rtlhooks.c: Moved to... |
| * rtlhooks.cc: ...here. |
| * rtx-vector-builder.c: Moved to... |
| * rtx-vector-builder.cc: ...here. |
| * run-rtl-passes.c: Moved to... |
| * run-rtl-passes.cc: ...here. |
| * sancov.c: Moved to... |
| * sancov.cc: ...here. |
| * sanopt.c: Moved to... |
| * sanopt.cc: ...here. |
| * sbitmap.c: Moved to... |
| * sbitmap.cc: ...here. |
| * sched-deps.c: Moved to... |
| * sched-deps.cc: ...here. |
| * sched-ebb.c: Moved to... |
| * sched-ebb.cc: ...here. |
| * sched-rgn.c: Moved to... |
| * sched-rgn.cc: ...here. |
| * sel-sched-dump.c: Moved to... |
| * sel-sched-dump.cc: ...here. |
| * sel-sched-ir.c: Moved to... |
| * sel-sched-ir.cc: ...here. |
| * sel-sched.c: Moved to... |
| * sel-sched.cc: ...here. |
| * selftest-diagnostic.c: Moved to... |
| * selftest-diagnostic.cc: ...here. |
| * selftest-rtl.c: Moved to... |
| * selftest-rtl.cc: ...here. |
| * selftest-run-tests.c: Moved to... |
| * selftest-run-tests.cc: ...here. |
| * selftest.c: Moved to... |
| * selftest.cc: ...here. |
| * sese.c: Moved to... |
| * sese.cc: ...here. |
| * shrink-wrap.c: Moved to... |
| * shrink-wrap.cc: ...here. |
| * simplify-rtx.c: Moved to... |
| * simplify-rtx.cc: ...here. |
| * sparseset.c: Moved to... |
| * sparseset.cc: ...here. |
| * spellcheck-tree.c: Moved to... |
| * spellcheck-tree.cc: ...here. |
| * spellcheck.c: Moved to... |
| * spellcheck.cc: ...here. |
| * sreal.c: Moved to... |
| * sreal.cc: ...here. |
| * stack-ptr-mod.c: Moved to... |
| * stack-ptr-mod.cc: ...here. |
| * statistics.c: Moved to... |
| * statistics.cc: ...here. |
| * stmt.c: Moved to... |
| * stmt.cc: ...here. |
| * stor-layout.c: Moved to... |
| * stor-layout.cc: ...here. |
| * store-motion.c: Moved to... |
| * store-motion.cc: ...here. |
| * streamer-hooks.c: Moved to... |
| * streamer-hooks.cc: ...here. |
| * stringpool.c: Moved to... |
| * stringpool.cc: ...here. |
| * substring-locations.c: Moved to... |
| * substring-locations.cc: ...here. |
| * symtab.c: Moved to... |
| * symtab.cc: ...here. |
| * target-globals.c: Moved to... |
| * target-globals.cc: ...here. |
| * targhooks.c: Moved to... |
| * targhooks.cc: ...here. |
| * timevar.c: Moved to... |
| * timevar.cc: ...here. |
| * toplev.c: Moved to... |
| * toplev.cc: ...here. |
| * tracer.c: Moved to... |
| * tracer.cc: ...here. |
| * trans-mem.c: Moved to... |
| * trans-mem.cc: ...here. |
| * tree-affine.c: Moved to... |
| * tree-affine.cc: ...here. |
| * tree-call-cdce.c: Moved to... |
| * tree-call-cdce.cc: ...here. |
| * tree-cfg.c: Moved to... |
| * tree-cfg.cc: ...here. |
| * tree-cfgcleanup.c: Moved to... |
| * tree-cfgcleanup.cc: ...here. |
| * tree-chrec.c: Moved to... |
| * tree-chrec.cc: ...here. |
| * tree-complex.c: Moved to... |
| * tree-complex.cc: ...here. |
| * tree-data-ref.c: Moved to... |
| * tree-data-ref.cc: ...here. |
| * tree-dfa.c: Moved to... |
| * tree-dfa.cc: ...here. |
| * tree-diagnostic.c: Moved to... |
| * tree-diagnostic.cc: ...here. |
| * tree-dump.c: Moved to... |
| * tree-dump.cc: ...here. |
| * tree-eh.c: Moved to... |
| * tree-eh.cc: ...here. |
| * tree-emutls.c: Moved to... |
| * tree-emutls.cc: ...here. |
| * tree-if-conv.c: Moved to... |
| * tree-if-conv.cc: ...here. |
| * tree-inline.c: Moved to... |
| * tree-inline.cc: ...here. |
| * tree-into-ssa.c: Moved to... |
| * tree-into-ssa.cc: ...here. |
| * tree-iterator.c: Moved to... |
| * tree-iterator.cc: ...here. |
| * tree-loop-distribution.c: Moved to... |
| * tree-loop-distribution.cc: ...here. |
| * tree-nested.c: Moved to... |
| * tree-nested.cc: ...here. |
| * tree-nrv.c: Moved to... |
| * tree-nrv.cc: ...here. |
| * tree-object-size.c: Moved to... |
| * tree-object-size.cc: ...here. |
| * tree-outof-ssa.c: Moved to... |
| * tree-outof-ssa.cc: ...here. |
| * tree-parloops.c: Moved to... |
| * tree-parloops.cc: ...here. |
| * tree-phinodes.c: Moved to... |
| * tree-phinodes.cc: ...here. |
| * tree-predcom.c: Moved to... |
| * tree-predcom.cc: ...here. |
| * tree-pretty-print.c: Moved to... |
| * tree-pretty-print.cc: ...here. |
| * tree-profile.c: Moved to... |
| * tree-profile.cc: ...here. |
| * tree-scalar-evolution.c: Moved to... |
| * tree-scalar-evolution.cc: ...here. |
| * tree-sra.c: Moved to... |
| * tree-sra.cc: ...here. |
| * tree-ssa-address.c: Moved to... |
| * tree-ssa-address.cc: ...here. |
| * tree-ssa-alias.c: Moved to... |
| * tree-ssa-alias.cc: ...here. |
| * tree-ssa-ccp.c: Moved to... |
| * tree-ssa-ccp.cc: ...here. |
| * tree-ssa-coalesce.c: Moved to... |
| * tree-ssa-coalesce.cc: ...here. |
| * tree-ssa-copy.c: Moved to... |
| * tree-ssa-copy.cc: ...here. |
| * tree-ssa-dce.c: Moved to... |
| * tree-ssa-dce.cc: ...here. |
| * tree-ssa-dom.c: Moved to... |
| * tree-ssa-dom.cc: ...here. |
| * tree-ssa-dse.c: Moved to... |
| * tree-ssa-dse.cc: ...here. |
| * tree-ssa-forwprop.c: Moved to... |
| * tree-ssa-forwprop.cc: ...here. |
| * tree-ssa-ifcombine.c: Moved to... |
| * tree-ssa-ifcombine.cc: ...here. |
| * tree-ssa-live.c: Moved to... |
| * tree-ssa-live.cc: ...here. |
| * tree-ssa-loop-ch.c: Moved to... |
| * tree-ssa-loop-ch.cc: ...here. |
| * tree-ssa-loop-im.c: Moved to... |
| * tree-ssa-loop-im.cc: ...here. |
| * tree-ssa-loop-ivcanon.c: Moved to... |
| * tree-ssa-loop-ivcanon.cc: ...here. |
| * tree-ssa-loop-ivopts.c: Moved to... |
| * tree-ssa-loop-ivopts.cc: ...here. |
| * tree-ssa-loop-manip.c: Moved to... |
| * tree-ssa-loop-manip.cc: ...here. |
| * tree-ssa-loop-niter.c: Moved to... |
| * tree-ssa-loop-niter.cc: ...here. |
| * tree-ssa-loop-prefetch.c: Moved to... |
| * tree-ssa-loop-prefetch.cc: ...here. |
| * tree-ssa-loop-split.c: Moved to... |
| * tree-ssa-loop-split.cc: ...here. |
| * tree-ssa-loop-unswitch.c: Moved to... |
| * tree-ssa-loop-unswitch.cc: ...here. |
| * tree-ssa-loop.c: Moved to... |
| * tree-ssa-loop.cc: ...here. |
| * tree-ssa-math-opts.c: Moved to... |
| * tree-ssa-math-opts.cc: ...here. |
| * tree-ssa-operands.c: Moved to... |
| * tree-ssa-operands.cc: ...here. |
| * tree-ssa-phiopt.c: Moved to... |
| * tree-ssa-phiopt.cc: ...here. |
| * tree-ssa-phiprop.c: Moved to... |
| * tree-ssa-phiprop.cc: ...here. |
| * tree-ssa-pre.c: Moved to... |
| * tree-ssa-pre.cc: ...here. |
| * tree-ssa-propagate.c: Moved to... |
| * tree-ssa-propagate.cc: ...here. |
| * tree-ssa-reassoc.c: Moved to... |
| * tree-ssa-reassoc.cc: ...here. |
| * tree-ssa-sccvn.c: Moved to... |
| * tree-ssa-sccvn.cc: ...here. |
| * tree-ssa-scopedtables.c: Moved to... |
| * tree-ssa-scopedtables.cc: ...here. |
| * tree-ssa-sink.c: Moved to... |
| * tree-ssa-sink.cc: ...here. |
| * tree-ssa-strlen.c: Moved to... |
| * tree-ssa-strlen.cc: ...here. |
| * tree-ssa-structalias.c: Moved to... |
| * tree-ssa-structalias.cc: ...here. |
| * tree-ssa-tail-merge.c: Moved to... |
| * tree-ssa-tail-merge.cc: ...here. |
| * tree-ssa-ter.c: Moved to... |
| * tree-ssa-ter.cc: ...here. |
| * tree-ssa-threadbackward.c: Moved to... |
| * tree-ssa-threadbackward.cc: ...here. |
| * tree-ssa-threadedge.c: Moved to... |
| * tree-ssa-threadedge.cc: ...here. |
| * tree-ssa-threadupdate.c: Moved to... |
| * tree-ssa-threadupdate.cc: ...here. |
| * tree-ssa-uncprop.c: Moved to... |
| * tree-ssa-uncprop.cc: ...here. |
| * tree-ssa-uninit.c: Moved to... |
| * tree-ssa-uninit.cc: ...here. |
| * tree-ssa.c: Moved to... |
| * tree-ssa.cc: ...here. |
| * tree-ssanames.c: Moved to... |
| * tree-ssanames.cc: ...here. |
| * tree-stdarg.c: Moved to... |
| * tree-stdarg.cc: ...here. |
| * tree-streamer-in.c: Moved to... |
| * tree-streamer-in.cc: ...here. |
| * tree-streamer-out.c: Moved to... |
| * tree-streamer-out.cc: ...here. |
| * tree-streamer.c: Moved to... |
| * tree-streamer.cc: ...here. |
| * tree-switch-conversion.c: Moved to... |
| * tree-switch-conversion.cc: ...here. |
| * tree-tailcall.c: Moved to... |
| * tree-tailcall.cc: ...here. |
| * tree-vect-data-refs.c: Moved to... |
| * tree-vect-data-refs.cc: ...here. |
| * tree-vect-generic.c: Moved to... |
| * tree-vect-generic.cc: ...here. |
| * tree-vect-loop-manip.c: Moved to... |
| * tree-vect-loop-manip.cc: ...here. |
| * tree-vect-loop.c: Moved to... |
| * tree-vect-loop.cc: ...here. |
| * tree-vect-patterns.c: Moved to... |
| * tree-vect-patterns.cc: ...here. |
| * tree-vect-slp-patterns.c: Moved to... |
| * tree-vect-slp-patterns.cc: ...here. |
| * tree-vect-slp.c: Moved to... |
| * tree-vect-slp.cc: ...here. |
| * tree-vect-stmts.c: Moved to... |
| * tree-vect-stmts.cc: ...here. |
| * tree-vector-builder.c: Moved to... |
| * tree-vector-builder.cc: ...here. |
| * tree-vectorizer.c: Moved to... |
| * tree-vectorizer.cc: ...here. |
| * tree-vrp.c: Moved to... |
| * tree-vrp.cc: ...here. |
| * tree.c: Moved to... |
| * tree.cc: ...here. |
| * tsan.c: Moved to... |
| * tsan.cc: ...here. |
| * typed-splay-tree.c: Moved to... |
| * typed-splay-tree.cc: ...here. |
| * ubsan.c: Moved to... |
| * ubsan.cc: ...here. |
| * valtrack.c: Moved to... |
| * valtrack.cc: ...here. |
| * value-prof.c: Moved to... |
| * value-prof.cc: ...here. |
| * var-tracking.c: Moved to... |
| * var-tracking.cc: ...here. |
| * varasm.c: Moved to... |
| * varasm.cc: ...here. |
| * varpool.c: Moved to... |
| * varpool.cc: ...here. |
| * vec-perm-indices.c: Moved to... |
| * vec-perm-indices.cc: ...here. |
| * vec.c: Moved to... |
| * vec.cc: ...here. |
| * vmsdbgout.c: Moved to... |
| * vmsdbgout.cc: ...here. |
| * vr-values.c: Moved to... |
| * vr-values.cc: ...here. |
| * vtable-verify.c: Moved to... |
| * vtable-verify.cc: ...here. |
| * web.c: Moved to... |
| * web.cc: ...here. |
| * xcoffout.c: Moved to... |
| * xcoffout.cc: ...here. |
| |
| 2022-01-17 qing zhao <qing.zhao@oracle.com> |
| |
| * tree-ssa-uninit.c (warn_uninit): Delete the 4th parameter. Handle |
| .DEFERRED_INIT call with an anonymous SSA_NAME specially. |
| (check_defs): Handle .DEFERRED_INIT call with an anonymous SSA_NAME |
| specially. |
| (warn_uninit_phi_uses): Delete the 4th actual when call warn_uninit. |
| (warn_uninitialized_vars): Likewise. |
| (warn_uninitialized_phi): Likewise. |
| |
| 2022-01-17 Jason Merrill <jason@redhat.com> |
| |
| * diagnostic.h (struct diagnostic_context): Add includes_seen. |
| * diagnostic.c (diagnostic_initialize): Initialize it. |
| (diagnostic_finish): Clean it up. |
| (includes_seen): New function. |
| (diagnostic_report_current_module): Use it. |
| |
| 2022-01-17 Richard Biener <rguenther@suse.de> |
| |
| PR middle-end/101292 |
| * diagnostic-spec.c (copy_warning): Make sure to not |
| reference old hashtable content on possible resize. |
| * warning-control.cc (copy_warning): Likewise. |
| |
| 2022-01-17 Jakub Jelinek <jakub@redhat.com> |
| |
| PR target/103973 |
| * tree-cfg.h (cond_only_block_p): Declare. |
| * tree-ssa-phiopt.c (cond_only_block_p): Move function to ... |
| * tree-cfg.c (cond_only_block_p): ... here. No longer static. |
| * optabs.def (spaceship_optab): New optab. |
| * internal-fn.def (SPACESHIP): New internal function. |
| * internal-fn.h (expand_SPACESHIP): Declare. |
| * internal-fn.c (expand_PHI): Formatting fix. |
| (expand_SPACESHIP): New function. |
| * tree-ssa-math-opts.c (optimize_spaceship): New function. |
| (math_opts_dom_walker::after_dom_children): Use it. |
| * config/i386/i386.md (spaceship<mode>3): New define_expand. |
| * config/i386/i386-protos.h (ix86_expand_fp_spaceship): Declare. |
| * config/i386/i386-expand.c (ix86_expand_fp_spaceship): New function. |
| * doc/md.texi (spaceship@var{m}3): Document. |
| |
| 2022-01-17 Kewen Lin <linkw@linux.ibm.com> |
| |
| * config/rs6000/altivec.md (altivec_vreveti2): Remove. |
| * config/rs6000/vsx.md (*vsx_extract_si, *vsx_extract_si_<uns>float_df, |
| *vsx_extract_si_<uns>float_<mode>, *vsx_insert_extract_v4sf_p9): Use |
| known constant values to simplify code. |
| |
| 2022-01-17 Haochen Gui <guihaoc@gcc.gnu.org> |
| |
| PR target/103124 |
| * config/rs6000/vsx.md (split pattern for TI to V1TI move): Defined. |
| |
| 2022-01-16 wwwhhhyyy <hongyu.wang@intel.com> |
| |
| * config/i386/i386.h (TARGET_DEST_FALSE_DEP_FOR_GLC): New macro. |
| * config/i386/sse.md (<avx512>_<complexopname>_<mode><maskc_name><round_name>): |
| Insert zero-idiom in output template when attr enabled, set new attribute to |
| true for non-mask/maskz insn. |
| (avx512fp16_<complexopname>sh_v8hf<mask_scalarc_name><round_scalarcz_name>): |
| Likewise. |
| (avx512dq_mul<mode>3<mask_name>): Likewise. |
| (<avx2_avx512>_permvar<mode><mask_name>): Likewise. |
| (avx2_perm<mode>_1<mask_name>): Likewise. |
| (avx512f_perm<mode>_1<mask_name>): Likewise. |
| (avx512dq_rangep<mode><mask_name><round_saeonly_name>): Likewise. |
| (avx512dq_ranges<mode><mask_scalar_name><round_saeonly_scalar_name>): |
| Likewise. |
| (<avx512>_getmant<mode><mask_name><round_saeonly_name>): Likewise. |
| (avx512f_vgetmant<mode><mask_scalar_name><round_saeonly_scalar_name>): |
| Likewise. |
| * config/i386/subst.md (mask3_dest_false_dep_for_glc_cond): New |
| subst_attr. |
| (mask4_dest_false_dep_for_glc_cond): Likewise. |
| (mask6_dest_false_dep_for_glc_cond): Likewise. |
| (mask10_dest_false_dep_for_glc_cond): Likewise. |
| (maskc_dest_false_dep_for_glc_cond): Likewise. |
| (mask_scalar4_dest_false_dep_for_glc_cond): Likewise. |
| (mask_scalarc_dest_false_dep_for_glc_cond): Likewise. |
| * config/i386/x86-tune.def (X86_TUNE_DEST_FALSE_DEP_FOR_GLC): New |
| DEF_TUNE enabled for m_SAPPHIRERAPIDS and m_ALDERLAKE |
| |
| 2022-01-15 Martin Sebor <msebor@redhat.com> |
| |
| PR c/63272 |
| * diagnostic-spec.c (nowarn_spec_t::nowarn_spec_t): Handle |
| -Wdangling-pointer. |
| * doc/invoke.texi (-Wdangling-pointer): Document new option. |
| * gimple-ssa-warn-access.cc (pass_waccess::clone): Set new member. |
| (pass_waccess::check_pointer_uses): New function. |
| (pass_waccess::gimple_call_return_arg): New function. |
| (pass_waccess::gimple_call_return_arg_ref): New function. |
| (pass_waccess::check_call_dangling): New function. |
| (pass_waccess::check_dangling_uses): New function overloads. |
| (pass_waccess::check_dangling_stores): New function. |
| (pass_waccess::check_dangling_stores): New function. |
| (pass_waccess::m_clobbers): New data member. |
| (pass_waccess::m_func): New data member. |
| (pass_waccess::m_run_number): New data member. |
| (pass_waccess::m_check_dangling_p): New data member. |
| (pass_waccess::check_alloca): Check m_early_checks_p. |
| (pass_waccess::check_alloc_size_call): Same. |
| (pass_waccess::check_strcat): Same. |
| (pass_waccess::check_strncat): Same. |
| (pass_waccess::check_stxcpy): Same. |
| (pass_waccess::check_stxncpy): Same. |
| (pass_waccess::check_strncmp): Same. |
| (pass_waccess::check_memop_access): Same. |
| (pass_waccess::check_read_access): Same. |
| (pass_waccess::check_builtin): Call check_pointer_uses. |
| (pass_waccess::warn_invalid_pointer): Add arguments. |
| (is_auto_decl): New function. |
| (pass_waccess::check_stmt): New function. |
| (pass_waccess::check_block): Call check_stmt. |
| (pass_waccess::execute): Call check_dangling_uses, |
| check_dangling_stores. Empty m_clobbers. |
| * passes.def (pass_warn_access): Invoke pass two more times. |
| |
| 2022-01-15 Martin Sebor <msebor@redhat.com> |
| |
| PR tree-optimization/80532 |
| * common.opt (-Wuse-after-free): New options. |
| * diagnostic-spec.c (nowarn_spec_t::nowarn_spec_t): Handle |
| OPT_Wreturn_local_addr and OPT_Wuse_after_free_. |
| * diagnostic-spec.h (NW_DANGLING): New enumerator. |
| * doc/invoke.texi (-Wuse-after-free): Document new option. |
| * gimple-ssa-warn-access.cc (pass_waccess::check_call): Rename... |
| (pass_waccess::check_call_access): ...to this. |
| (pass_waccess::check): Rename... |
| (pass_waccess::check_block): ...to this. |
| (pass_waccess::check_pointer_uses): New function. |
| (pass_waccess::gimple_call_return_arg): New function. |
| (pass_waccess::warn_invalid_pointer): New function. |
| (pass_waccess::check_builtin): Handle free and realloc. |
| (gimple_use_after_inval_p): New function. |
| (get_realloc_lhs): New function. |
| (maybe_warn_mismatched_realloc): New function. |
| (pointers_related_p): New function. |
| (pass_waccess::check_call): Call check_pointer_uses. |
| (pass_waccess::execute): Compute and free dominance info. |
| |
| 2022-01-15 Uroš Bizjak <ubizjak@gmail.com> |
| |
| * config/i386/i386-expand.c (ix86_expand_sse_movcc): Use |
| expand_simple_unop and expand_simple_binop instead of manually |
| constructing NOT, AND and IOR RTXes. Use vector_all_ones_operand |
| consistently. Eliminate common subexpressions and simplify code. |
| * config/i386/sse.md (<any_logic:code><MODEF:mode>3): New expander. |
| (<any_logic:code><MODEF:mode>3): Make public. |
| |
| 2022-01-14 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * ipa-param-manipulation.c (ipa_dump_adjusted_parameters): Dump |
| reverse flag as "reverse" for the sake of consistency. |
| * ipa-sra.c: Fix copyright year. |
| (ipa_sra_function_summaries::duplicate): Copy the reverse flag. |
| (dump_isra_access): Tweak dump line. |
| (isra_write_node_summary): Write the reverse flag. |
| (isra_read_node_info): Read it. |
| (pull_accesses_from_callee): Test its consistency and copy it. |
| |
| 2022-01-14 Richard Sandiford <richard.sandiford@arm.com> |
| |
| PR middle-end/104026 |
| * tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize |
| partial_load_store_bias. |
| |
| 2022-01-14 Martin Sebor <msebor@redhat.com> |
| |
| PR middle-end/101475 |
| * pointer-query.cc (handle_component_ref): Use the size of |
| the enclosing object if it's smaller than the member. |
| |
| 2022-01-14 Martin Liska <mliska@suse.cz> |
| |
| * configure: Regenerate. |
| |
| 2022-01-14 Uroš Bizjak <ubizjak@gmail.com> |
| |
| * config/i386/i386.md (*add<mode>_1_slp"): |
| Mark alternative 1 output operand earlyclobbered. |
| (*sub<mode>_1_slp): Ditto. |
| (*and<mode>_1_slp): Ditto. |
| (*<code><mode>_1_slp): Ditto. |
| (*neg<mode>_1_slp): Ditto. |
| (*one_cmpl<mode>_1_slp): Ditto. |
| (*ashl<mode>3_1_slp): Ditto. |
| (*<insn><mode>3_1_slp): Ditto. |
| (*<insn><mode>3_1_slp): Ditto. |
| |
| 2022-01-14 Kewen Lin <linkw@linux.ibm.com> |
| |
| PR tree-optimization/104015 |
| * tree-vect-loop.c (vect_analyze_loop): Check |
| param_vect_partial_vector_usage for supports_partial_vectors. |
| |
| 2022-01-14 Jakub Jelinek <jakub@redhat.com> |
| |
| PR c++/89074 |
| * fold-const.c (address_compare): Punt on comparison of address of |
| one object with address of end of another object if |
| folding_initializer. |
| |
| 2022-01-14 Jakub Jelinek <jakub@redhat.com> |
| |
| PR target/98737 |
| * tree-ssa-forwprop.c (simplify_builtin_call): Canonicalize |
| __atomic_fetch_op (p, x, y) op x into __atomic_op_fetch (p, x, y) |
| and __atomic_op_fetch (p, x, y) iop x into |
| __atomic_fetch_op (p, x, y). |
| |
| 2022-01-14 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * config/arc/arc.h (DWARF_FRAME_REGNUM): Update definition. |
| (DWARF_FRAME_RETURN_COLUMN): Use RETURN_ADDR_REGNUM macro. |
| (INCOMING_RETURN_ADDR_RTX): Likewise. |
| (DWARF_ALT_FRAME_RETURN_COLUMN): Define. |
| |
| 2022-01-14 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * config/arc/arc.c (arc_compute_frame_size): Remove condition when |
| computin checking accumulator regs. |
| (arc_expand_prologue): Update comments. |
| (arc_expand_epilogue): Likewise. |
| |
| 2022-01-14 Roger Sayle <roger@nextmovesoftware.com> |
| Uroš Bizjak <ubizjak@gmail.com> |
| |
| * config/i386/i386-expand.c (ix86_expand_v1ti_to_ti): Use force_reg. |
| (ix86_expand_ti_to_v1ti): Use force_reg. |
| (ix86_expand_v1ti_shift): Use force_reg. |
| (ix86_expand_v1ti_rotate): Use force_reg. |
| (ix86_expand_v1ti_ashiftrt): Provide new three operation |
| implementations for shifts by 111..126 bits. Use force_reg. |
| |
| 2022-01-14 Martin Liska <mliska@suse.cz> |
| |
| * common/config/arm/arm-common.c (arm_target_mode): Fix |
| warning: unterminated quoting directive [-Wformat=]. |
| |
| 2022-01-14 Siddhesh Poyarekar <siddhesh@gotplt.org> |
| |
| PR tree-optimization/104009 |
| * tree-object-size.c (compute_builtin_object_size): Bail out on |
| negative offset. |
| (plus_stmt_object_size): Return maximum of wholesize and minimum |
| of 0 for negative offset. |
| |
| 2022-01-14 liuhongt <hongtao.liu@intel.com> |
| |
| PR target/104001 |
| PR target/94790 |
| PR target/104014 |
| * config/i386/i386.md (*xor2andn): Refine predicate of |
| operands[0] from nonimmediate_operand to |
| register_operand, remove TARGET_AVX512BW from condition. |
| |
| 2022-01-14 David Malcolm <dmalcolm@redhat.com> |
| |
| * doc/extend.texi (Function Attributes): Note that "tainted_args" can |
| be used on field decls. |
| (Common Function Attributes): Add entry on "tainted_args" attribute. |
| |
| 2022-01-13 Anthony Sharp <anthonysharp15@gmail.com> |
| Jason Merrill <jason@redhat.com> |
| |
| PR c++/70417 |
| * doc/invoke.texi: Documentation for Wmissing-template-keyword. |
| |
| 2022-01-13 Uroš Bizjak <ubizjak@gmail.com> |
| |
| PR target/103861 |
| * config/i386/i386.md (*ashlqi_ext<mode>_2): New insn pattern. |
| (*<any_shiftrt:insn>qi_ext<mode>_2): Ditto. |
| * config/i386/mmx.md (<any_shift:insn>v2qi): |
| New insn_and_split pattern. |
| |
| 2022-01-13 Robin Dapp <rdapp@linux.ibm.com> |
| |
| * internal-fn.c (expand_partial_load_optab_fn): Add bias. |
| (expand_partial_store_optab_fn): Likewise. |
| (internal_len_load_store_bias): New function. |
| * internal-fn.h (VECT_PARTIAL_BIAS_UNSUPPORTED): New define. |
| (internal_len_load_store_bias): New function. |
| * tree-vect-loop-manip.c (vect_set_loop_controls_directly): Set bias. |
| (vect_set_loop_condition_partial_vectors): Add header_seq parameter. |
| * tree-vect-loop.c (vect_verify_loop_lens): Verify bias. |
| (vect_estimate_min_profitable_iters): Account for bias. |
| (vect_get_loop_len): Add bias-adjusted length. |
| * tree-vect-stmts.c (vectorizable_store): Use. |
| (vectorizable_load): Use. |
| * tree-vectorizer.h (struct rgroup_controls): Add bias-adjusted length. |
| (LOOP_VINFO_PARTIAL_LOAD_STORE_BIAS): New macro. |
| * config/rs6000/vsx.md: Use const0 bias predicate. |
| * doc/md.texi: Document bias value. |
| |
| 2022-01-13 Andrew MacLeod <amacleod@redhat.com> |
| |
| PR tree-optimization/83072 |
| PR tree-optimization/83073 |
| PR tree-optimization/97909 |
| * fold-const.c (expr_not_equal_to): Use a multi-range class. |
| |
| 2022-01-13 Andrew MacLeod <amacleod@redhat.com> |
| |
| PR tree-optimization/96707 |
| * range-op.cc (operator_rshift::lhs_op1_relation): New. |
| |
| 2022-01-13 Uroš Bizjak <ubizjak@gmail.com> |
| |
| * config/i386/mmx.md (negv2qi): Disparage GPR alternative a bit. |
| Disable for TARGET_PARTIAL_REG_STALL unless optimizing for size. |
| (negv2qi splitters): Use lowpart_subreg instead of |
| gen_lowpart to create subreg. |
| (<plusminus:insn>v2qi3): Disparage GPR alternative a bit. |
| Disable for TARGET_PARTIAL_REG_STALL unless optimizing for size. |
| (<plusminus:insn>v2qi3 splitters): Use lowpart_subreg instead of |
| gen_lowpart to create subreg. |
| * config/i386/i386.md (*subqi_ext<mode>_2): Move. |
| |
| 2022-01-13 Uroš Bizjak <ubizjak@gmail.com> |
| |
| PR target/104003 |
| * config/i386/mmx.md (*xop_pcmov_<mode>): Use VI_16_32 mode iterator. |
| |
| 2022-01-13 Martin Liska <mliska@suse.cz> |
| |
| * common/config/arm/arm-common.c (arm_target_mode): Wrap |
| keywords with %<, %> and remove trailing punctuation char. |
| (arm_canon_arch_option_1): Likewise. |
| (arm_asm_auto_mfpu): Likewise. |
| * config/arm/arm-builtins.c (arm_expand_builtin): Likewise. |
| * config/arm/arm.c (arm_options_perform_arch_sanity_checks): Likewise. |
| (use_vfp_abi): Likewise. |
| (aapcs_vfp_is_call_or_return_candidate): Likewise. |
| (arm_handle_cmse_nonsecure_entry): Likewise. |
| (arm_handle_cmse_nonsecure_call): Likewise. |
| (thumb1_md_asm_adjust): Likewise. |
| |
| 2022-01-13 Paul A. Clarke <pc@us.ibm.com> |
| |
| * config/rs6000/smmintrin.h (_mm_round_pd, _mm_round_ps, |
| _mm_round_sd, _mm_round_ss, _MM_FROUND_TO_NEAREST_INT, |
| _MM_FROUND_TO_ZERO, _MM_FROUND_TO_POS_INF, _MM_FROUND_TO_NEG_INF, |
| _MM_FROUND_CUR_DIRECTION, _MM_FROUND_RAISE_EXC, _MM_FROUND_NO_EXC, |
| _MM_FROUND_NINT, _MM_FROUND_FLOOR, _MM_FROUND_CEIL, _MM_FROUND_TRUNC, |
| _MM_FROUND_RINT, _MM_FROUND_NEARBYINT): New. |
| (_mm_ceil_pd, _mm_ceil_ps, _mm_ceil_sd, _mm_ceil_ss, _mm_floor_pd, |
| _mm_floor_ps, _mm_floor_sd, _mm_floor_ss): Convert from function to |
| macro. |
| |
| 2022-01-13 Jakub Jelinek <jakub@redhat.com> |
| |
| PR tree-optimization/103989 |
| * tree-inline.c (setup_one_parameter): Don't copy parms with |
| empty type. |
| |
| 2022-01-13 Thomas Schwinge <thomas@codesourcery.com> |
| |
| * tree-streamer-out.c (pack_ts_base_value_fields): Don't pack |
| 'TYPE_ADDR_SPACE' for offloading. |
| * tree-streamer-in.c (unpack_ts_base_value_fields): Don't unpack |
| 'TYPE_ADDR_SPACE' for offloading. |
| |
| 2022-01-13 Julian Brown <julian@codesourcery.com> |
| Thomas Schwinge <thomas@codesourcery.com> |
| |
| * omp-oacc-kernels-decompose.cc (add_wait): New function, split out |
| of... |
| (add_async_clauses_and_wait): ...here. Call new outlined function. |
| (decompose_kernels_region_body): Add wait at the end of |
| explicitly-asynchronous kernels regions. |
| |
| 2022-01-13 Thomas Schwinge <thomas@codesourcery.com> |
| |
| PR middle-end/100280 |
| * omp-oacc-kernels-decompose.cc (maybe_build_inner_data_region): |
| Mark variables used in synthesized data clauses as addressable. |
| |
| 2022-01-13 Martin Liska <mliska@suse.cz> |
| |
| * config/epiphany/epiphany.c (epiphany_mode_priority): |
| Use gcc_unreachable for not handled cases. |
| |
| 2022-01-13 Martin Liska <mliska@suse.cz> |
| |
| * config/epiphany/epiphany.c (epiphany_handle_interrupt_attribute): |
| Use %qs format specifier. |
| (epiphany_override_options): Wrap keyword in %<, %>. |
| |
| 2022-01-13 Haochen Jiang <haochen.jiang@intel.com> |
| |
| PR target/94790 |
| * config/i386/i386.md (*xor2andn): New define_insn_and_split. |
| |
| 2022-01-13 Xionghu Luo <luoxhu@linux.ibm.com> |
| |
| * config/rs6000/altivec.md (sldoi_to_mov<mode>): New. |
| |
| 2022-01-12 Uroš Bizjak <ubizjak@gmail.com> |
| |
| PR target/100637 |
| PR target/103861 |
| * config/i386/i386-expand.c (ix86_emit_vec_binop): New static function. |
| (ix86_expand_sse_movcc): Use ix86_emit_vec_binop instead of gen_rtx_X |
| when constructing vector logic RTXes. |
| (expand_vec_perm_pshufb2): Ditto. |
| * config/i386/mmx.md (negv2qi): Disparage GPR alternative a bit. |
| (<plusminus:insn>v2qi3): Ditto. |
| (vcond<mode><mode>): Re-enable for TARGET_SSE2. |
| (vcondu<mode><mode>): Ditto. |
| (vcond_mask_<mode><mode>): Ditto. |
| (one_cmpl<VI_32:mode>2): Remove expander. |
| (one_cmpl<VI_16_32:mode>2): Rename from one_cmplv2qi. |
| Use VI_16_32 mode iterator. |
| (one_cmpl<VI_16_32:mode>2 splitters): Use VI_16_32 mode iterator. |
| Use lowpart_subreg instead of gen_lowpart to create subreg. |
| (*andnot<VI_16_32:mode>3): Merge from "*andnot<VI_32:mode>" and |
| "*andnotv2qi3" insn patterns using VI_16_32 mode iterator. |
| Disparage GPR alternative a bit. Add CC clobber. |
| (*andnot<VI_16_32:mode>3 splitters): Use VI_16_32 mode iterator. |
| Use lowpart_subreg instead of gen_lowpart to create subreg. |
| (*<any_logic:code><VI_16_32:mode>3): Merge from |
| "*<any_logic:code><VI_32:mode>" and "*<any_logic:code>v2qi3" insn patterns |
| using VI_16_32 mode iterator. Disparage GPR alternative a bit. |
| Add CC clobber. |
| (*<any_logic:code><VI_16_32:mode>3 splitters):Use VI_16_32 mode |
| iterator. Use lowpart_subreg instead of gen_lowpart to create subreg. |
| |
| 2022-01-12 Clément Chigot <clement.chigot@atos.net> |
| |
| * configure.ac: Check sizeof ino_t and dev_t. |
| (HOST_STAT_FOR_64BIT_INODES): New AC_DEFINE to provide stat |
| syscall being able to handle 64bit inodes. |
| * config.in: Regenerate. |
| * configure: Regenerate. |
| * incpath.c (HOST_STAT_FOR_64BIT_INODES): New define. |
| (remove_duplicates): Use it. |
| |
| 2022-01-12 Andrew MacLeod <amacleod@redhat.com> |
| |
| PR tree-optimization/103551 |
| * tree-vrp.c (execute_ranger_vrp): Always set EDGE_EXECUTABLE. |
| |
| 2022-01-12 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/103990 |
| * tree-pass.h (tail_merge_optimize): Drop unused argument. |
| * tree-ssa-tail-merge.c (tail_merge_optimize): Likewise. |
| * tree-ssa-pre.c (pass_pre::execute): Retain TODO_cleanup_cfg |
| and adjust call to tail_merge_optimize. |
| |
| 2022-01-12 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * tree-vect-loop.c (vect-analyze-loop): Handle scenario where target |
| does not add autovectorize_vector_modes. |
| |
| 2022-01-12 Martin Liska <mliska@suse.cz> |
| |
| * config/aarch64/aarch64.c (aarch64_parse_boolean_options): Use |
| %qs where possible. |
| (aarch64_parse_sve_width_string): Likewise. |
| (aarch64_override_options_internal): Likewise. |
| (aarch64_print_hint_for_extensions): Likewise. |
| (aarch64_validate_sls_mitigation): Likewise. |
| (aarch64_handle_attr_arch): Likewise. |
| (aarch64_handle_attr_cpu): Likewise. |
| (aarch64_handle_attr_tune): Likewise. |
| (aarch64_handle_attr_isa_flags): Likewise. |
| |
| 2022-01-12 Martin Liska <mliska@suse.cz> |
| |
| * config.gcc: Include elfos.h before ${tm_file}. |
| |
| 2022-01-12 Hans-Peter Nilsson <hp@axis.com> |
| |
| * config/cris/cris.c: Quote identifiers in parameters to error |
| and internal_error, and remove extraneous spaces with punctuation. |
| * config/cris/cris.h (CRIS_ASSERT): When passing on stringified |
| expression to internal_error, pass it as a parameter instead of |
| appending it to the format part. |
| |
| 2022-01-12 Hans-Peter Nilsson <hp@axis.com> |
| |
| * config/cris/cris.c (cris_postdbr_cmpelim): Parenthesize |
| parameter to as_a. |
| |
| 2022-01-11 qing zhao <qing.zhao@oracle.com> |
| |
| * gimplify.c (gimple_add_init_for_auto_var): Delete the 3rd argument. |
| Change the 3rd argument of function .DEFERRED_INIT to the name of the |
| decl. |
| (gimplify_decl_expr): Delete the 3rd argument when call |
| gimple_add_init_for_auto_var. |
| * internal-fn.c (expand_DEFERRED_INIT): Update comments to reflect |
| the 3rd argument change of function .DEFERRED_INIT. |
| * tree-cfg.c (verify_gimple_call): Update comments and verification |
| to reflect the 3rd argument change of function .DEFERRED_INIT. |
| * tree-sra.c (generate_subtree_deferred_init): Delete the 3rd argument. |
| (sra_modify_deferred_init): Change the 3rd argument of function |
| .DEFERRED_INIT to the name of the decl. |
| |
| 2022-01-11 Thomas Koenig <tkoenig@gcc.gnu.org> |
| |
| * flag-types.h (enum gfc_convert): Add flags for |
| conversion. |
| |
| 2022-01-11 Michael Meissner <meissner@the-meissners.org> |
| |
| * config/rs6000/rs6000.c (rs6000_option_override_internal): Remove |
| checks for only C/C++ front ends before allowing the long double |
| format to change without a warning. |
| |
| 2022-01-11 Richard Sandiford <richard.sandiford@arm.com> |
| |
| PR rtl-optimization/103974 |
| * ira-int.h (ira_subloop_allocnos_can_differ_p): Take an |
| extra argument, default true, that says whether old-reload |
| targets should be excluded. |
| * ira-color.c (color_pass): Pass false. |
| |
| 2022-01-11 Uroš Bizjak <ubizjak@gmail.com> |
| |
| PR target/103861 |
| * config/i386/mmx.md (vcond<mode><mode>): |
| Use VI_16_32 mode iterator. Enable for TARGET_SSE4_1. |
| (vcondu<mode><mode>): Ditto. |
| (vcond_mask_<mode><mode>): Ditto. |
| (mmx_pblendvb_v8qi): Rename from mmx_pblendvb64. |
| (mmx_pblendvb_<mode>): Rename from mmx_pblendvb32. |
| Use VI_16_32 mode iterator. |
| * config/i386/i386-expand.c (ix86_expand_sse_movcc): |
| Update for rename. Handle V2QImode. |
| (expand_vec_perm_blend): Update for rename. |
| |
| 2022-01-11 Jakub Jelinek <jakub@redhat.com> |
| |
| PR c++/101597 |
| * tree.def (OBJ_TYPE_REF): Document type of OBJ_TYPE_REF_TOKEN. |
| |
| 2022-01-11 Siddhesh Poyarekar <siddhesh@gotplt.org> |
| |
| PR middle-end/70090 |
| * tree-object-size.c (size_valid_p): New function. |
| (size_for_offset): Remove OFFSET constness assertion. |
| (addr_object_size): Build dynamic expressions for object |
| sizes and use size_valid_p to decide if it is valid for the |
| given OBJECT_SIZE_TYPE. |
| (compute_builtin_object_size): Allow dynamic offsets when |
| computing size at O0. |
| (call_object_size): Call size_valid_p. |
| (plus_stmt_object_size): Allow non-constant offset and use |
| size_valid_p to decide if it is valid for the given |
| OBJECT_SIZE_TYPE. |
| |
| 2022-01-11 Siddhesh Poyarekar <siddhesh@gotplt.org> |
| |
| PR middle-end/70090 |
| * tree-object-size.c (alloc_object_size): Make and return |
| non-constant size expression. |
| (call_object_size): Return expression or unknown based on |
| whether dynamic object size is requested. |
| |
| 2022-01-11 Siddhesh Poyarekar <siddhesh@gotplt.org> |
| |
| PR middle-end/70090 |
| * tree-object-size.c: Include tree-dfa.h. |
| (parm_object_size): New function. |
| (collect_object_sizes_for): Call it. |
| |
| 2022-01-11 Siddhesh Poyarekar <siddhesh@gotplt.org> |
| |
| PR middle-end/70090 |
| * builtins.c (fold_builtin_object_size): Adjust for dynamic size |
| expressions. |
| * tree-object-size.c: Include gimplify-me.h. |
| (struct object_size_info): New member UNKNOWNS. |
| (size_initval_p, size_usable_p, object_sizes_get_raw): New |
| functions. |
| (object_sizes_get): Return suitable gimple variable for |
| object size. |
| (bundle_sizes): New function. |
| (object_sizes_set): Use it and handle dynamic object size |
| expressions. |
| (object_sizes_set_temp): New function. |
| (size_for_offset): Adjust for dynamic size expressions. |
| (emit_phi_nodes, propagate_unknowns, gimplify_size_expressions): |
| New functions. |
| (compute_builtin_object_size): Call gimplify_size_expressions |
| for OST_DYNAMIC. |
| (dynamic_object_size): New function. |
| (cond_expr_object_size): Use it. |
| (phi_dynamic_object_size): New function. |
| (collect_object_sizes_for): Call it for OST_DYNAMIC. Adjust to |
| accommodate dynamic object sizes. |
| |
| 2022-01-11 Siddhesh Poyarekar <siddhesh@gotplt.org> |
| Jakub Jelinek <jakub@redhat.com> |
| |
| PR tree-optimization/103961 |
| * tree-object-size.c (plus_stmt_object_size): Always avoid |
| computing offset for -1 size. |
| |
| 2022-01-11 Andrew MacLeod <amacleod@redhat.com> |
| |
| PR tree-optimization/103821 |
| * range-op.cc (range_operator::fold_range): Only do precise ranges |
| when there are not too many subranges. |
| |
| 2022-01-11 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * ira-costs.c (ira_tune_allocno_costs): Fix missing rclass |
| definition in IRA_HARD_REGNO_ADD_COST_MULTIPLIER code. |
| |
| 2022-01-11 Roger Sayle <roger@nextmovesoftware.com> |
| Richard Biener <rguenther@suse.de> |
| |
| * tree-ssa-math-opts.c (struct widen_mul_stats): Add a |
| highpart_mults_inserted field. |
| (convert_mult_to_highpart): New function to convert right shift |
| of a widening multiply into a MULT_HIGHPART_EXPR. |
| (math_opts_dom_walker::after_dom_children) [RSHIFT_EXPR]: |
| Call new convert_mult_to_highpart function. |
| (pass_optimize_widening_mul::execute): Add a statistics counter |
| for tracking "highpart multiplications inserted" events. |
| |
| 2022-01-11 Xionghu Luo <luoxhu@linux.ibm.com> |
| |
| PR target/102239 |
| * config/rs6000/rs6000-protos.h (rs6000_is_valid_rotate_dot_mask): New |
| declare. |
| * config/rs6000/rs6000.c (rs6000_is_valid_rotate_dot_mask): New |
| function. |
| * config/rs6000/rs6000.md (*branch_anddi3_dot): New. |
| |
| 2022-01-11 Olivier Hainque <hainque@adacore.com> |
| |
| * gcc.c (driver_handle_option): State --sysroot as |
| validated. |
| |
| 2022-01-11 Kewen Lin <linkw@linux.ibm.com> |
| |
| * config/rs6000/rs6000.c (rs6000_disable_incompatible_switches): Remove |
| useless related to option -mno-power10. |
| |
| 2022-01-11 Haochen Jiang <haochen.jiang@intel.com> |
| |
| PR target/53652 |
| * config/i386/sse.md (*andnot<mode>3): Extend predicate of |
| operands[1] from register_operand to vector_operand. |
| |
| 2022-01-10 Uroš Bizjak <ubizjak@gmail.com> |
| |
| PR target/103861 |
| * config/i386/i386-expand.c (ix86_expand_int_sse_cmp): |
| Handle V2QImode. |
| * config/i386/mmx.md (<sat_plusminus:insn><mode>3): |
| Use VI1_16_32 mode iterator. |
| (*eq<mode>3): Ditto. |
| (*gt<mode>3): Ditto. |
| (*xop_maskcmp<mode>3): Ditto. |
| (*xop_maskcmp_uns<mode>3): Ditto. |
| (vec_cmp<mode><mode>): Ditto. |
| (vec_cmpu<mode><mode>): Ditto. |
| |
| 2022-01-10 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/103948 |
| * tree-vect-generic.c (expand_vector_condition): Return true if |
| all ones vector is returned for true, all zeros vector for false |
| and the target defines corresponding vec_cmp{,u}MN named RTX pattern. |
| |
| 2022-01-10 Paul A. Clarke <pc@us.ibm.com> |
| |
| * config/rs6000/smmintrin.h (_mm_blendv_epi8): Use vec_blendv |
| when _ARCH_PWR10. Use signed types. |
| (_mm_blendv_ps): Use vec_blendv when _ARCH_PWR10. |
| (_mm_blendv_pd): Likewise. |
| |
| 2022-01-10 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * tree-vectorizer.c (better_epilogue_loop_than_p): Round factors up for |
| epilogue costing. |
| * tree-vect-loop.c (vect_analyze_loop): Re-analyze all modes for |
| epilogues, unless we are guaranteed that we can't have partial vectors. |
| * genopinit.c: (partial_vectors_supported): Generate new function. |
| |
| 2022-01-10 Jakub Jelinek <jakub@redhat.com> |
| |
| PR target/102024 |
| * config/i386/i386.c (classify_argument): Add zero_width_bitfields |
| argument, when seeing DECL_FIELD_CXX_ZERO_WIDTH_BIT_FIELD bitfields, |
| always ignore them, when seeing other zero sized bitfields, either |
| set zero_width_bitfields to 1 and ignore it or if equal to 2 process |
| it. Pass it to recursive calls. Add wrapper |
| with old arguments and diagnose ABI differences for C structures |
| with zero width bitfields. Formatting fixes. |
| |
| 2022-01-10 Richard Sandiford <richard.sandiford@arm.com> |
| |
| PR rtl-optimization/98782 |
| * ira-int.h (ira_soft_conflict): Declare. |
| * ira-color.c (max_soft_conflict_loop_depth): New constant. |
| (ira_soft_conflict): New function. |
| (spill_soft_conflicts): Likewise. |
| (assign_hard_reg): Use them to handle the case described by |
| the comment above ira_soft_conflict. |
| (improve_allocation): Likewise. |
| * ira.c (check_allocation): Allow allocnos with "soft" conflicts |
| to share the same register. |
| |
| 2022-01-10 Richard Sandiford <richard.sandiford@arm.com> |
| |
| PR rtl-optimization/98782 |
| * ira-int.h (ira_caller_save_cost): New function. |
| (ira_caller_save_loop_spill_p): Likewise. |
| * ira-build.c (ira_propagate_hard_reg_costs): Test whether it is |
| cheaper to spill a call-clobbered register throughout a loop rather |
| than spill it around each individual call. If so, treat all |
| call-clobbered registers as conflicts and... |
| (propagate_allocno_info): ...do not propagate call information |
| from the child to the parent. |
| * ira-color.c (move_spill_restore): Update accordingly. |
| * ira-costs.c (ira_tune_allocno_costs): Use ira_caller_save_cost. |
| |
| 2022-01-10 Richard Sandiford <richard.sandiford@arm.com> |
| |
| PR rtl-optimization/98782 |
| * ira-int.h (ira_allocno::might_conflict_with_parent_p): New field. |
| (ALLOCNO_MIGHT_CONFLICT_WITH_PARENT_P): New macro. |
| (ira_single_region_allocno_p): New function. |
| (ira_total_conflict_hard_regs): Likewise. |
| * ira-build.c (ira_create_allocno): Initialize |
| ALLOCNO_MIGHT_CONFLICT_WITH_PARENT_P. |
| (ira_propagate_hard_reg_costs): New function. |
| (propagate_allocno_info): Use it. Try to avoid propagating |
| hard register conflicts to parent allocnos if we can handle |
| the conflicts by spilling instead. Limit the propagated |
| register costs to the cost of spilling throughout the child loop. |
| * ira-color.c (color_pass): Use ira_single_region_allocno_p to |
| test whether a child and parent allocno can share the same |
| register. |
| (move_spill_restore): Adjust for the new behavior of |
| propagate_allocno_info. |
| |
| 2022-01-10 Richard Sandiford <richard.sandiford@arm.com> |
| |
| PR rtl-optimization/98782 |
| * ira-int.h (ira_subloop_allocnos_can_differ_p): New function, |
| extracted from... |
| * ira-color.c (color_pass): ...here. |
| |
| 2022-01-10 Richard Sandiford <richard.sandiford@arm.com> |
| |
| PR rtl-optimization/98782 |
| * ira-color.c (color_pass): Add comments to describe the spill costs. |
| (move_spill_restore): Likewise. Fix reversed calculation. |
| |
| 2022-01-10 Richard Sandiford <richard.sandiford@arm.com> |
| |
| PR rtl-optimization/98782 |
| * ira-int.h (ira_loop_border_costs): New class. |
| * ira-color.c (ira_loop_border_costs::ira_loop_border_costs): |
| New constructor. |
| (calculate_allocno_spill_cost): Use ira_loop_border_costs. |
| (color_pass): Likewise. |
| (move_spill_restore): Likewise. |
| |
| 2022-01-10 Eric Botcazou <ebotcazou@adacore.com> |
| |
| PR target/103465 |
| * coretypes.h (unwind_info_type): Swap UI_SEH and UI_TARGET. |
| |
| 2022-01-10 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/100359 |
| * tree-ssa-loop-ivcanon.c (try_unroll_loop_completely): |
| Allow non-growing peeling with !allow_peel and UL_ALL. |
| |
| 2022-01-08 Roger Sayle <roger@nextmovesoftware.com> |
| |
| * config/i386/i386-expand.c (ix86_expand_vector_move): Add |
| special case for TImode to V1TImode moves, going via V2DImode. |
| |
| 2022-01-08 Jakub Jelinek <jakub@redhat.com> |
| |
| PR c++/89074 |
| * match.pd ((ptr) (x p+ y) p+ z -> (ptr) (x p+ (y + z))): New GENERIC |
| simplification. |
| |
| 2022-01-08 David Malcolm <dmalcolm@redhat.com> |
| |
| * doc/analyzer.texi |
| (Special Functions for Debugging the Analyzer): Document |
| __analyzer_dump_escaped. |
| |
| 2022-01-08 David Malcolm <dmalcolm@redhat.com> |
| |
| * doc/analyzer.texi (Other Debugging Techniques): Document |
| region::is_named_decl_p. |
| |
| 2022-01-07 Andrew Pinski <apinski@marvell.com> |
| |
| PR target/102941 |
| * config/arm/aarch-common.c (arm_md_asm_adjust): |
| Use a temp if !REG_P. |
| |
| 2022-01-07 Uroš Bizjak <ubizjak@gmail.com> |
| |
| * config/i386/mmx.md (*move<V_32:mode>_internal): Add isa attribute. |
| (*movv2qi_internal): Remve sse2 requirement for alternatives 4,5. |
| |
| 2022-01-07 liuhongt <hongtao.liu@intel.com> |
| |
| PR rtl-optimization/103750 |
| * fwprop.c (forward_propagate_into): Allow propagations from |
| inner loop to outer loop. |
| |
| 2022-01-07 Roger Sayle <roger@nextmovesoftware.com> |
| |
| * config/nvptx/nvptx.md (*cnot<mode>2): New define_insn. |
| |
| 2022-01-07 Haochen Gui <guihaoc@gcc.gnu.org> |
| |
| * config/rs6000/rs6000.md (rs6000_mffscrni): Define. |
| (rs6000_set_fpscr_rn): Change the type of operand[0] from DI to SI. |
| Call gen_rs6000_mffscrni when operand[0] is a const_0_to_3_operand. |
| |
| 2022-01-07 liuhongt <hongtao.liu@intel.com> |
| |
| * config/i386/sse.md |
| (*<avx512>_eq<mode>3<mask_scalar_merge_name>_1): Extend to |
| UNSPEC_PCMP_UNSIGNED. |
| |
| 2022-01-07 liuhongt <hongtao.liu@intel.com> |
| |
| PR target/103753 |
| * config/i386/i386-expand.c (ix86_expand_vector_set): Not use |
| gen_avx2_pblendph_1 when elt == 0. |
| * config/i386/sse.md (avx2_pblendph): Rename to .. |
| (avx2_pblend<ssemodesuffix>_1).. this, and extend to V16HI. |
| (*avx2_pblendw): Rename to .. |
| (*avx2_pblend<ssemodesuffix>): .. this, and extend to V16HF. |
| (avx2_pblendw): Rename to .. |
| (*avx2_pblend<ssemodesuffix>): .. this, and extend to V16HF. |
| (blendsuf): Removed. |
| (sse4_1_pblend<blendsuf>): Renamed to .. |
| (sse4_1_pblend<ssemodesuffix>): .. this. |
| |
| 2022-01-06 H.J. Lu <hjl.tools@gmail.com> |
| |
| PR target/103925 |
| * config/i386/i386.c (ix86_output_indirect_function_return): |
| Generate INT3 after indirect jmp for -mharden-sls=indirect-jmp. |
| |
| 2022-01-06 H.J. Lu <hjl.tools@gmail.com> |
| |
| PR target/102952 |
| * config/i386/i386-opts.h (harden_sls): Replace |
| harden_sls_indirect_branch with harden_sls_indirect_jmp. |
| * config/i386/i386.c (ix86_output_jmp_thunk_or_indirect): |
| Likewise. |
| (ix86_output_indirect_jmp): Likewise. |
| (ix86_output_call_insn): Likewise. |
| * config/i386/i386.opt: Replace indirect-branch with |
| indirect-jmp. Replace harden_sls_indirect_branch with |
| harden_sls_indirect_jmp. |
| * doc/invoke.texi (-harden-sls=): Replace indirect-branch with |
| indirect-jmp. |
| |
| 2022-01-06 Uroš Bizjak <ubizjak@gmail.com> |
| |
| * config/i386/i386.c (ix86_output_ssemov) <MODE_DI>: |
| Add %q modifier for operands in general registers. |
| <MODE_SI>: Add %q modifier for operands in general registers. |
| * config/i386/i386.md (*movhi_internal): Change type attribute of |
| xmm-gpr interunit alternatives 9,10 to ssemov and mode attribute |
| to SImode for non-avx512fp16 targets. |
| (*movhf_internal): Ditto for xmm-gpr interunit alternatives 6,8. |
| * config/i386/mmx.md (*movv2qi_internal): |
| Ditto for xmm-gpr interunit alternatives 8,9. |
| |
| 2022-01-06 Kito Cheng <kito.cheng@sifive.com> |
| |
| * common/config/riscv/riscv-common.c (riscv_implied_info): Add |
| vector extensions. |
| (riscv_ext_version_table): Add version info for vector extensions. |
| (riscv_ext_flag_table): Add option mask for vector extensions. |
| * config/riscv/riscv-opts.h (MASK_VECTOR_EEW_32): New. |
| (MASK_VECTOR_EEW_64): New. |
| (MASK_VECTOR_EEW_FP_32): New. |
| (MASK_VECTOR_EEW_FP_64): New. |
| (MASK_ZVL32B): New. |
| (MASK_ZVL64B): New. |
| (MASK_ZVL128B): New. |
| (MASK_ZVL256B): New. |
| (MASK_ZVL512B): New. |
| (MASK_ZVL1024B): New. |
| (MASK_ZVL2048B): New. |
| (MASK_ZVL4096B): New. |
| (MASK_ZVL8192B): New. |
| (MASK_ZVL16384B): New. |
| (MASK_ZVL32768B): New. |
| (MASK_ZVL65536B): New. |
| (TARGET_ZVL32B): New. |
| (TARGET_ZVL64B): New. |
| (TARGET_ZVL128B): New. |
| (TARGET_ZVL256B): New. |
| (TARGET_ZVL512B): New. |
| (TARGET_ZVL1024B): New. |
| (TARGET_ZVL2048B): New. |
| (TARGET_ZVL4096B): New. |
| (TARGET_ZVL8192B): New. |
| (TARGET_ZVL16384B): New. |
| (TARGET_ZVL32768B): New. |
| (TARGET_ZVL65536B): New. |
| * config/riscv/riscv.opt (Mask(VECTOR)): New. |
| (riscv_vector_eew_flags): New. |
| (riscv_zvl_flags): New. |
| |
| 2022-01-06 Kito Cheng <kito.cheng@sifive.com> |
| |
| * common/config/riscv/riscv-common.c |
| (riscv_subset_list::parse_multiletter_ext): Allow ext. name has |
| digit. |
| |
| 2022-01-06 Jakub Jelinek <jakub@redhat.com> |
| |
| PR tree-optimization/103899 |
| * expr.c (expand_expr_real_1): Add a workaround for bogus uninit |
| warning by moving context variable to the only spot where it is used |
| and moving gcc_assert into if body. |
| |
| 2022-01-06 Jakub Jelinek <jakub@redhat.com> |
| |
| PR rtl-optimization/103908 |
| * ifcvt.c (bb_valid_for_noce_process_p): Punt on bbs ending with |
| asm goto. |
| |
| 2022-01-05 Bill Schmidt <wschmidt@linux.ibm.com> |
| |
| PR target/103622 |
| * config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin): |
| Skip over instances with undefined function types. |
| |
| 2022-01-05 Andrew Pinski <apinski@marvell.com> |
| |
| PR target/103910 |
| * config/i386/i386.h (x86_mfence): Mark with GTY. |
| |
| 2022-01-05 Uroš Bizjak <ubizjak@gmail.com> |
| |
| PR target/103861 |
| * config/i386/mmx.md (VI_16_32): New mode iterator. |
| (VI1_16_32): Ditto. |
| (mmxvecsize): Handle V2QI mode. |
| (<smaxmin:code><mode>3): Rename from <smaxmin:code>v4qi3. |
| Use VI1_16_32 mode iterator. |
| (<umaxmin:code><mode>3): Rename from <umaxmin:code>v4qi3. |
| Use VI1_16_32 mode iterator. |
| (abs<mode>2): Use VI_16_32 mode iterator. |
| (uavgv2qi3_ceil): New insn pattern. |
| |
| 2022-01-05 Martin Sebor <msebor@redhat.com> |
| |
| * gimple-ssa-warn-access.cc (pass_waccess::maybe_warn_memmodel): Use |
| %qs to avoid -Wformat-diag. |
| |
| 2022-01-05 Uroš Bizjak <ubizjak@gmail.com> |
| |
| PR target/103915 |
| * config/i386/mmx.md (one_cmplv2qi2): Change |
| alternatives 1,2 type from sselog to sselog1. |
| |
| 2022-01-05 Uroš Bizjak <ubizjak@gmail.com> |
| |
| PR target/103905 |
| * config/i386/i386-expand.c (expand_vec_perm_pshufb): Fix number of |
| narrow mode remapped elements for !one_operand_p case. |
| |
| 2022-01-05 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/103816 |
| * tree-vect-data-refs.c (vect_analyze_group_access_1): Also |
| check DR_GROUP_GAP compute for overflow and representability. |
| |
| 2022-01-05 Jakub Jelinek <jakub@redhat.com> |
| |
| PR fortran/103691 |
| * gimple-fold.c (fold_stmt_1): Don't call maybe_fold_reference |
| for DEBUG stmts with ADDR_EXPR gimple_debug_bind_get_value, |
| it can do unwanted rhs folding like &a[0] into &2.0 etc. |
| |
| 2022-01-05 Kewen Lin <linkw@linux.ibm.com> |
| |
| PR ipa/102059 |
| * config/rs6000/rs6000.c (TARGET_NEED_IPA_FN_TARGET_INFO): New macro. |
| (TARGET_UPDATE_IPA_FN_TARGET_INFO): Likewise. |
| (rs6000_need_ipa_fn_target_info): New function. |
| (rs6000_update_ipa_fn_target_info): Likewise. |
| (rs6000_can_inline_p): Adjust for ipa function summary target info. |
| * config/rs6000/rs6000.h (RS6000_FN_TARGET_INFO_HTM): New macro. |
| * ipa-fnsummary.c (ipa_dump_fn_summary): Adjust for ipa function |
| summary target info. |
| (analyze_function_body): Adjust for ipa function summary target info |
| and call hook rs6000_need_ipa_fn_target_info and |
| rs6000_update_ipa_fn_target_info. |
| (ipa_merge_fn_summary_after_inlining): Adjust for ipa function summary |
| target info. |
| (inline_read_section): Likewise. |
| (ipa_fn_summary_write): Likewise. |
| * ipa-fnsummary.h (ipa_fn_summary::target_info): New member. |
| * doc/tm.texi: Regenerate. |
| * doc/tm.texi.in (TARGET_UPDATE_IPA_FN_TARGET_INFO): Document new hook. |
| (TARGET_NEED_IPA_FN_TARGET_INFO): Likewise. |
| * target.def (update_ipa_fn_target_info): New hook. |
| (need_ipa_fn_target_info): Likewise. |
| * targhooks.c (default_need_ipa_fn_target_info): New function. |
| (default_update_ipa_fn_target_info): Likewise. |
| * targhooks.h (default_update_ipa_fn_target_info): New declare. |
| (default_need_ipa_fn_target_info): Likewise. |
| |
| 2022-01-04 Martin Sebor <msebor@redhat.com> |
| |
| PR middle-end/99612 |
| * builtins.c (get_memmodel): Move warning code to |
| gimple-ssa-warn-access.cc. |
| (expand_builtin_atomic_compare_exchange): Same. |
| (expand_ifn_atomic_compare_exchange): Same. |
| (expand_builtin_atomic_load): Same. |
| (expand_builtin_atomic_store): Same. |
| (expand_builtin_atomic_clear): Same. |
| * doc/extend.texi (__atomic_exchange_n): Update valid memory |
| models. |
| * gimple-ssa-warn-access.cc (memmodel_to_uhwi): New function. |
| (struct memmodel_pair): New struct. |
| (memmodel_name): New function. |
| (pass_waccess::maybe_warn_memmodel): New function. |
| (pass_waccess::check_atomic_memmodel): New function. |
| (pass_waccess::check_atomic_builtin): Handle memory model. |
| * input.c (expansion_point_location_if_in_system_header): Return |
| original location if expansion location is in a system header. |
| |
| 2022-01-04 Uroš Bizjak <ubizjak@gmail.com> |
| |
| PR target/103861 |
| * config/i386/mmx.md (one_cmplv2qi3): New insn pattern. |
| (one_cmplv2qi3 splitters): New post-reload splitters. |
| (*andnotv2qi3): New insn pattern. |
| (andnotv2qi3 splitters): New post-reload splitters. |
| (<any_logic:code>v2qi3): New insn pattern. |
| (<any_logic:insn>v2qi3 splitters): New post-reload splitters. |
| |
| 2022-01-04 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/103800 |
| * tree-vect-loop.c (vectorizable_phi): Remove assert and |
| expand comment. |
| |
| 2022-01-04 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/103690 |
| * tree-pass.h (tail_merge_optimize): Adjust. |
| * tree-ssa-tail-merge.c (tail_merge_optimize): Pass in whether |
| to re-split critical edges, move CFG cleanup ... |
| * tree-ssa-pre.c (pass_pre::execute): ... here, before |
| simple_dce_from_worklist and delay freeing inserted_exprs from |
| ... |
| (fini_pre): .. here. |
| |
| 2022-01-04 Roger Sayle <roger@nextmovesoftware.com> |
| |
| * config/nvptx/nvptx.h (STORE_FLAG_VALUE): Change to 1. |
| * config/nvptx/nvptx.md (movbi): Use P1 constraint for true. |
| (setcc_from_bi): Remove SImode specific pattern. |
| (setcc<mode>_from_bi): Provide more general HSDIM pattern. |
| (extendbi<mode>2, zeroextendbi<mode>2): Provide instructions |
| for sign- and zero-extending BImode predicates to integers. |
| (setcc_int<mode>): Remove previous (-1-based) instructions. |
| (cstorebi4): Remove BImode to SImode specific expander. |
| (cstore<mode>4): Fix indentation. Expand using setccsi_from_bi. |
| (cstore<mode>4): For both integer and floating point modes. |
| |
| 2022-01-04 Olivier Hainque <hainque@adacore.com> |
| |
| * gcc.c (driver_handle_option): do_save --sysroot. |
| |
| 2022-01-04 Richard Biener <rguenther@suse.de> |
| |
| PR tree-optimization/103864 |
| PR tree-optimization/103544 |
| * tree-vect-slp.c (vect_analyze_slp_instance): Exclude |
| reductions wrapped in conversions from SLP handling. |
| (vect_analyze_slp): Revert PR103544 change. |
| |
| 2022-01-04 Jakub Jelinek <jakub@redhat.com> |
| |
| PR rtl-optimization/103860 |
| * shrink-wrap.c (try_shrink_wrapping): Don't call can_get_prologue |
| uselessly for blocks for which it has been called already. |
| |
| 2022-01-04 Cui,Lili <lili.cui@intel.com> |
| |
| * common/config/i386/cpuinfo.h (get_intel_cpu): Add new model values |
| to Alderlake and Rocketlake. |
| |
| 2022-01-04 Chung-Lin Tang <cltang@codesourcery.com> |
| |
| PR middle-end/103643 |
| * gimplify.c (gimplify_omp_affinity): Adjust gimplify_expr of entire |
| OMP_CLAUSE_DECL to use 'is_gimple_lvalue, fb_lvalue' |
| |
| 2022-01-04 liuhongt <hongtao.liu@intel.com> |
| |
| PR target/103895 |
| * config/i386/sse.md (*bit_and_float_vector_all_ones): |
| Force_reg operand 1 to avoid ICE. |
| |
| 2022-01-04 Jason Merrill <jason@redhat.com> |
| |
| * tree-pretty-print.c (do_niy): Add spc parameter. |
| (NIY): Pass it. |
| (print_call_name): Add spc local variable. |
| |
| 2022-01-03 Uroš Bizjak <ubizjak@gmail.com> |
| |
| PR target/103894 |
| * config/i386/mmx.md (mov<V_32:mode>): Remove TARGET_SSE2 constraint. |
| (mov<V_32:mode>_internal): Ditto. |
| (*push<V_32:mode>_rex64): Ditto. |
| (movmisalign<V_32:mode>): Ditto. |
| (*push<V_32:mode>_rex64 splitter): Enable for |
| TARGET_64BIT && TARGET_SSE. |
| (*push<V_32:mode>2): Remove insn pattern. |
| |
| 2022-01-03 Andrew Pinski <apinski@marvell.com> |
| |
| PR c/33193 |
| * doc/extend.texi: Extend the documentation about Complex |
| types for casting and also rewrite the __real__/__imag__ |
| expression portion to use tables. |
| Move __builtin_complex to the Complex type section. |
| |
| 2022-01-03 Jakub Jelinek <jakub@redhat.com> |
| |
| PR target/98737 |
| * internal-fn.def (ATOMIC_ADD_FETCH_CMP_0, ATOMIC_SUB_FETCH_CMP_0, |
| ATOMIC_AND_FETCH_CMP_0, ATOMIC_OR_FETCH_CMP_0, ATOMIC_XOR_FETCH_CMP_0): |
| New internal fns. |
| * internal-fn.h (ATOMIC_OP_FETCH_CMP_0_EQ, ATOMIC_OP_FETCH_CMP_0_NE, |
| ATOMIC_OP_FETCH_CMP_0_LT, ATOMIC_OP_FETCH_CMP_0_LE, |
| ATOMIC_OP_FETCH_CMP_0_GT, ATOMIC_OP_FETCH_CMP_0_GE): New enumerators. |
| * internal-fn.c (expand_ATOMIC_ADD_FETCH_CMP_0, |
| expand_ATOMIC_SUB_FETCH_CMP_0, expand_ATOMIC_AND_FETCH_CMP_0, |
| expand_ATOMIC_OR_FETCH_CMP_0, expand_ATOMIC_XOR_FETCH_CMP_0): New |
| functions. |
| * optabs.def (atomic_add_fetch_cmp_0_optab, |
| atomic_sub_fetch_cmp_0_optab, atomic_and_fetch_cmp_0_optab, |
| atomic_or_fetch_cmp_0_optab, atomic_xor_fetch_cmp_0_optab): New |
| direct optabs. |
| * builtins.h (expand_ifn_atomic_op_fetch_cmp_0): Declare. |
| * builtins.c (expand_ifn_atomic_op_fetch_cmp_0): New function. |
| * tree-ssa-ccp.c: Include internal-fn.h. |
| (optimize_atomic_bit_test_and): Add . before internal fn call |
| in function comment. Change return type from void to bool and |
| return true only if successfully replaced. |
| (optimize_atomic_op_fetch_cmp_0): New function. |
| (pass_fold_builtins::execute): Use optimize_atomic_op_fetch_cmp_0 |
| for BUILT_IN_ATOMIC_{ADD,SUB,AND,OR,XOR}_FETCH_{1,2,4,8,16} and |
| BUILT_IN_SYNC_{ADD,SUB,AND,OR,XOR}_AND_FETCH_{1,2,4,8,16}, |
| for *XOR* ones only if optimize_atomic_bit_test_and failed. |
| * config/i386/sync.md (atomic_<plusminus_mnemonic>_fetch_cmp_0<mode>, |
| atomic_<logic>_fetch_cmp_0<mode>): New define_expand patterns. |
| (atomic_add_fetch_cmp_0<mode>_1, atomic_sub_fetch_cmp_0<mode>_1, |
| atomic_<logic>_fetch_cmp_0<mode>_1): New define_insn patterns. |
| * doc/md.texi (atomic_add_fetch_cmp_0<mode>, |
| atomic_sub_fetch_cmp_0<mode>, atomic_and_fetch_cmp_0<mode>, |
| atomic_or_fetch_cmp_0<mode>, atomic_xor_fetch_cmp_0<mode>): Document |
| new named patterns. |
| |
| 2022-01-03 Richard Biener <rguenther@suse.de> |
| |
| PR middle-end/103851 |
| * tree-cfg.c (move_sese_region_to_fn): Always release SSA names. |
| |
| 2022-01-03 Jakub Jelinek <jakub@redhat.com> |
| |
| PR c++/94716 |
| * symtab.c: Include fold-const.h. |
| (symtab_node::equal_address_to): If folding_initializer is true, |
| handle it like memory_accessed. Simplify. |
| |
| 2022-01-03 Martin Liska <mliska@suse.cz> |
| |
| * doc/extend.texi: Use ; for function declarations. |
| |
| 2022-01-03 Jakub Jelinek <jakub@redhat.com> |
| |
| PR c++/103600 |
| * symtab.c (symtab_node::equal_address_to): Return 0 if one of |
| VAR_DECLs has "non overlapping" attribute and rs1 != rs2. |
| |
| 2022-01-03 Jakub Jelinek <jakub@redhat.com> |
| |
| * gcc.c (process_command): Update copyright notice dates. |
| * gcov-dump.c (print_version): Ditto. |
| * gcov.c (print_version): Ditto. |
| * gcov-tool.c (print_version): Ditto. |
| * gengtype.c (create_file): Ditto. |
| * doc/cpp.texi: Bump @copying's copyright year. |
| * doc/cppinternals.texi: Ditto. |
| * doc/gcc.texi: Ditto. |
| * doc/gccint.texi: Ditto. |
| * doc/gcov.texi: Ditto. |
| * doc/install.texi: Ditto. |
| * doc/invoke.texi: Ditto. |
| |
| 2022-01-02 Uroš Bizjak <ubizjak@gmail.com> |
| |
| PR target/103861 |
| * config/i386/i386.h (VALID_SSE2_REG_MODE): Add V2QImode. |
| (VALID_INT_MODE_P): Ditto. |
| * config/i386/i386.c (ix86_secondary_reload): Handle |
| V2QImode reloads from SSE register to memory. |
| (vector_mode_supported_p): Always return true for V2QImode. |
| * config/i386/i386.md (*subqi_ext<mode>_2): New insn pattern. |
| (*negqi_ext<mode>_2): Ditto. |
| * config/i386/mmx.md (movv2qi): New expander. |
| (movmisalignv2qi): Ditto. |
| (*movv2qi_internal): New insn pattern. |
| (*pushv2qi2): Ditto. |
| (negv2qi2 and splitters): Ditto. |
| (<plusminus:insn>v2qi3 and splitters): Ditto. |
| |
| 2022-01-02 John David Anglin <danglin@gcc.gnu.org> |
| |
| * config/pa/pa.md (atomic_storeq): Use optab_libfunc to access |
| sync_lock_test_and_set libfunc. Call convert_memory_address to |
| convert memory address to Pmode. |
| (atomic_storehi, atomic_storesi, atomic_storedi): Likewise. |
| |
| |
| Copyright (C) 2022 Free Software Foundation, Inc. |
| |
| Copying and distribution of this file, with or without modification, |
| are permitted in any medium without royalty provided the copyright |
| notice and this notice are preserved. |