| # Makefile.in generated by automake 1.15.1 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994-2017 Free Software Foundation, Inc. |
| |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| VPATH = @srcdir@ |
| am__is_gnu_make = { \ |
| if test -z '$(MAKELEVEL)'; then \ |
| false; \ |
| elif test -n '$(MAKE_HOST)'; then \ |
| true; \ |
| elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ |
| true; \ |
| else \ |
| false; \ |
| fi; \ |
| } |
| am__make_running_with_option = \ |
| case $${target_option-} in \ |
| ?) ;; \ |
| *) echo "am__make_running_with_option: internal error: invalid" \ |
| "target option '$${target_option-}' specified" >&2; \ |
| exit 1;; \ |
| esac; \ |
| has_opt=no; \ |
| sane_makeflags=$$MAKEFLAGS; \ |
| if $(am__is_gnu_make); then \ |
| sane_makeflags=$$MFLAGS; \ |
| else \ |
| case $$MAKEFLAGS in \ |
| *\\[\ \ ]*) \ |
| bs=\\; \ |
| sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ |
| | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ |
| esac; \ |
| fi; \ |
| skip_next=no; \ |
| strip_trailopt () \ |
| { \ |
| flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ |
| }; \ |
| for flg in $$sane_makeflags; do \ |
| test $$skip_next = yes && { skip_next=no; continue; }; \ |
| case $$flg in \ |
| *=*|--*) continue;; \ |
| -*I) strip_trailopt 'I'; skip_next=yes;; \ |
| -*I?*) strip_trailopt 'I';; \ |
| -*O) strip_trailopt 'O'; skip_next=yes;; \ |
| -*O?*) strip_trailopt 'O';; \ |
| -*l) strip_trailopt 'l'; skip_next=yes;; \ |
| -*l?*) strip_trailopt 'l';; \ |
| -[dEDm]) skip_next=yes;; \ |
| -[JT]) skip_next=yes;; \ |
| esac; \ |
| case $$flg in \ |
| *$$target_option*) has_opt=yes; break;; \ |
| esac; \ |
| done; \ |
| test $$has_opt = yes |
| am__make_dryrun = (target_option=n; $(am__make_running_with_option)) |
| am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| target_triplet = @target@ |
| subdir = src |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \ |
| $(top_srcdir)/../config/enable.m4 \ |
| $(top_srcdir)/../config/futex.m4 \ |
| $(top_srcdir)/../config/hwcaps.m4 \ |
| $(top_srcdir)/../config/iconv.m4 \ |
| $(top_srcdir)/../config/lead-dot.m4 \ |
| $(top_srcdir)/../config/lib-ld.m4 \ |
| $(top_srcdir)/../config/lib-link.m4 \ |
| $(top_srcdir)/../config/lib-prefix.m4 \ |
| $(top_srcdir)/../config/lthostflags.m4 \ |
| $(top_srcdir)/../config/multi.m4 \ |
| $(top_srcdir)/../config/no-executables.m4 \ |
| $(top_srcdir)/../config/override.m4 \ |
| $(top_srcdir)/../config/stdint.m4 \ |
| $(top_srcdir)/../config/toolexeclibdir.m4 \ |
| $(top_srcdir)/../config/unwind_ipinfo.m4 \ |
| $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \ |
| $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \ |
| $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \ |
| $(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \ |
| $(top_srcdir)/../config/gc++filt.m4 \ |
| $(top_srcdir)/../config/tls.m4 $(top_srcdir)/../config/gthr.m4 \ |
| $(top_srcdir)/../config/cet.m4 $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| DIST_COMMON = $(srcdir)/Makefile.am |
| CONFIG_HEADER = $(top_builddir)/config.h |
| CONFIG_CLEAN_FILES = |
| CONFIG_CLEAN_VPATH_FILES = |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| am__install_max = 40 |
| am__nobase_strip_setup = \ |
| srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| am__nobase_strip = \ |
| for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| am__nobase_list = $(am__nobase_strip_setup); \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| if (++n[$$2] == $(am__install_max)) \ |
| { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| END { for (dir in files) print dir, files[dir] }' |
| am__base_list = \ |
| sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| am__uninstall_files_from_dir = { \ |
| test -z "$$files" \ |
| || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ |
| || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ |
| $(am__cd) "$$dir" && rm -f $$files; }; \ |
| } |
| am__installdirs = "$(DESTDIR)$(toolexeclibdir)" |
| LTLIBRARIES = $(toolexeclib_LTLIBRARIES) |
| am__DEPENDENCIES_1 = |
| @GLIBCXX_LDBL_COMPAT_TRUE@am__objects_1 = compatibility-ldbl.lo |
| am__objects_2 = compatibility.lo compatibility-debug_list.lo \ |
| compatibility-debug_list-2.lo $(am__objects_1) |
| @ENABLE_DUAL_ABI_TRUE@@GLIBCXX_LDBL_ALT128_COMPAT_TRUE@am__objects_3 = compatibility-ldbl-alt128-cxx11.lo |
| @GLIBCXX_LDBL_ALT128_COMPAT_TRUE@am__objects_4 = \ |
| @GLIBCXX_LDBL_ALT128_COMPAT_TRUE@ compatibility-ldbl-alt128.lo \ |
| @GLIBCXX_LDBL_ALT128_COMPAT_TRUE@ $(am__objects_3) |
| am__objects_5 = compatibility-c++0x.lo compatibility-atomic-c++0x.lo \ |
| compatibility-thread-c++0x.lo compatibility-chrono.lo \ |
| compatibility-condvar.lo $(am__objects_4) |
| am_libstdc___la_OBJECTS = $(am__objects_2) $(am__objects_5) |
| libstdc___la_OBJECTS = $(am_libstdc___la_OBJECTS) |
| @VTV_CYGMIN_FALSE@am_libstdc___la_rpath = -rpath $(toolexeclibdir) |
| @VTV_CYGMIN_TRUE@am_libstdc___la_rpath = -rpath $(toolexeclibdir) |
| libvtv_la_LIBADD = |
| @VTV_CYGMIN_TRUE@am_libvtv_la_OBJECTS = vtv_stubs.lo |
| libvtv_la_OBJECTS = $(am_libvtv_la_OBJECTS) |
| @VTV_CYGMIN_TRUE@am_libvtv_la_rpath = -rpath $(toolexeclibdir) |
| AM_V_P = $(am__v_P_@AM_V@) |
| am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) |
| am__v_P_0 = false |
| am__v_P_1 = : |
| AM_V_GEN = $(am__v_GEN_@AM_V@) |
| am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) |
| am__v_GEN_0 = @echo " GEN " $@; |
| am__v_GEN_1 = |
| AM_V_at = $(am__v_at_@AM_V@) |
| am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) |
| am__v_at_0 = @ |
| am__v_at_1 = |
| DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) |
| depcomp = |
| am__depfiles_maybe = |
| CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ |
| $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) |
| AM_V_lt = $(am__v_lt_@AM_V@) |
| am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) |
| am__v_lt_0 = --silent |
| am__v_lt_1 = |
| AM_V_CXX = $(am__v_CXX_@AM_V@) |
| am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@) |
| am__v_CXX_0 = @echo " CXX " $@; |
| am__v_CXX_1 = |
| CXXLD = $(CXX) |
| AM_V_CXXLD = $(am__v_CXXLD_@AM_V@) |
| am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@) |
| am__v_CXXLD_0 = @echo " CXXLD " $@; |
| am__v_CXXLD_1 = |
| SOURCES = $(libstdc___la_SOURCES) $(libvtv_la_SOURCES) |
| RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ |
| ctags-recursive dvi-recursive html-recursive info-recursive \ |
| install-data-recursive install-dvi-recursive \ |
| install-exec-recursive install-html-recursive \ |
| install-info-recursive install-pdf-recursive \ |
| install-ps-recursive install-recursive installcheck-recursive \ |
| installdirs-recursive pdf-recursive ps-recursive \ |
| tags-recursive uninstall-recursive |
| am__can_run_installinfo = \ |
| case $$AM_UPDATE_INFO_DIR in \ |
| n|no|NO) false;; \ |
| *) (install-info --version) >/dev/null 2>&1;; \ |
| esac |
| RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| distclean-recursive maintainer-clean-recursive |
| am__recursive_targets = \ |
| $(RECURSIVE_TARGETS) \ |
| $(RECURSIVE_CLEAN_TARGETS) \ |
| $(am__extra_recursive_targets) |
| AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS |
| am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) |
| # Read a list of newline-separated strings from the standard input, |
| # and print each of them once, without duplicates. Input order is |
| # *not* preserved. |
| am__uniquify_input = $(AWK) '\ |
| BEGIN { nonempty = 0; } \ |
| { items[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in items) print i; }; } \ |
| ' |
| # Make sure the list of sources is unique. This is necessary because, |
| # e.g., the same source file might be shared among _SOURCES variables |
| # for different programs/libraries. |
| am__define_uniq_tagged_files = \ |
| list='$(am__tagged_files)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | $(am__uniquify_input)` |
| ETAGS = etags |
| CTAGS = ctags |
| DIST_SUBDIRS = c++98 c++11 c++17 c++20 filesystem |
| ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@ |
| ACLOCAL = @ACLOCAL@ |
| ALLOCATOR_H = @ALLOCATOR_H@ |
| ALLOCATOR_NAME = @ALLOCATOR_NAME@ |
| AMTAR = @AMTAR@ |
| AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ |
| AR = @AR@ |
| AS = @AS@ |
| ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@ |
| ATOMIC_FLAGS = @ATOMIC_FLAGS@ |
| ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| BASIC_FILE_CC = @BASIC_FILE_CC@ |
| BASIC_FILE_H = @BASIC_FILE_H@ |
| CC = @CC@ |
| CCODECVT_CC = @CCODECVT_CC@ |
| CCOLLATE_CC = @CCOLLATE_CC@ |
| CCTYPE_CC = @CCTYPE_CC@ |
| CFLAGS = @CFLAGS@ |
| CLOCALE_CC = @CLOCALE_CC@ |
| CLOCALE_H = @CLOCALE_H@ |
| CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@ |
| CMESSAGES_CC = @CMESSAGES_CC@ |
| CMESSAGES_H = @CMESSAGES_H@ |
| CMONEY_CC = @CMONEY_CC@ |
| CNUMERIC_CC = @CNUMERIC_CC@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CPU_DEFINES_SRCDIR = @CPU_DEFINES_SRCDIR@ |
| CPU_OPT_BITS_RANDOM = @CPU_OPT_BITS_RANDOM@ |
| CPU_OPT_EXT_RANDOM = @CPU_OPT_EXT_RANDOM@ |
| CSTDIO_H = @CSTDIO_H@ |
| CTIME_CC = @CTIME_CC@ |
| CTIME_H = @CTIME_H@ |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| CXXFILT = @CXXFILT@ |
| CXXFLAGS = @CXXFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| C_INCLUDE_DIR = @C_INCLUDE_DIR@ |
| DBLATEX = @DBLATEX@ |
| DEBUG_FLAGS = @DEBUG_FLAGS@ |
| DEFS = @DEFS@ |
| DOT = @DOT@ |
| DOXYGEN = @DOXYGEN@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| ERROR_CONSTANTS_SRCDIR = @ERROR_CONSTANTS_SRCDIR@ |
| EXEEXT = @EXEEXT@ |
| EXTRA_CFLAGS = @EXTRA_CFLAGS@ |
| EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@ |
| FGREP = @FGREP@ |
| GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@ |
| GLIBCXX_LIBS = @GLIBCXX_LIBS@ |
| GREP = @GREP@ |
| HWCAP_CFLAGS = @HWCAP_CFLAGS@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBICONV = @LIBICONV@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LONG_DOUBLE_128_FLAGS = @LONG_DOUBLE_128_FLAGS@ |
| LONG_DOUBLE_ALT128_COMPAT_FLAGS = @LONG_DOUBLE_ALT128_COMPAT_FLAGS@ |
| LONG_DOUBLE_COMPAT_FLAGS = @LONG_DOUBLE_COMPAT_FLAGS@ |
| LTLIBICONV = @LTLIBICONV@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAINT = @MAINT@ |
| MAKEINFO = @MAKEINFO@ |
| MKDIR_P = @MKDIR_P@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@ |
| OPT_LDFLAGS = @OPT_LDFLAGS@ |
| OS_INC_SRCDIR = @OS_INC_SRCDIR@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PDFLATEX = @PDFLATEX@ |
| RANLIB = @RANLIB@ |
| SECTION_FLAGS = @SECTION_FLAGS@ |
| SECTION_LDFLAGS = @SECTION_LDFLAGS@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| SYMVER_FILE = @SYMVER_FILE@ |
| TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@ |
| USE_NLS = @USE_NLS@ |
| VERSION = @VERSION@ |
| VTV_CXXFLAGS = @VTV_CXXFLAGS@ |
| VTV_CXXLINKFLAGS = @VTV_CXXLINKFLAGS@ |
| VTV_PCH_CXXFLAGS = @VTV_PCH_CXXFLAGS@ |
| WARN_FLAGS = @WARN_FLAGS@ |
| XMLCATALOG = @XMLCATALOG@ |
| XMLLINT = @XMLLINT@ |
| XSLTPROC = @XSLTPROC@ |
| XSL_STYLE_DIR = @XSL_STYLE_DIR@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_CXX = @ac_ct_CXX@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| am__leading_dot = @am__leading_dot@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| baseline_dir = @baseline_dir@ |
| baseline_subdir_switch = @baseline_subdir_switch@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| check_msgfmt = @check_msgfmt@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| enable_shared = @enable_shared@ |
| enable_static = @enable_static@ |
| exec_prefix = @exec_prefix@ |
| get_gcc_base_ver = @get_gcc_base_ver@ |
| glibcxx_MOFILES = @glibcxx_MOFILES@ |
| glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@ |
| glibcxx_POFILES = @glibcxx_POFILES@ |
| glibcxx_builddir = @glibcxx_builddir@ |
| glibcxx_compiler_pic_flag = @glibcxx_compiler_pic_flag@ |
| glibcxx_compiler_shared_flag = @glibcxx_compiler_shared_flag@ |
| glibcxx_cxx98_abi = @glibcxx_cxx98_abi@ |
| glibcxx_localedir = @glibcxx_localedir@ |
| glibcxx_lt_pic_flag = @glibcxx_lt_pic_flag@ |
| glibcxx_prefixdir = @glibcxx_prefixdir@ |
| glibcxx_srcdir = @glibcxx_srcdir@ |
| glibcxx_toolexecdir = @glibcxx_toolexecdir@ |
| glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@ |
| gxx_include_dir = @gxx_include_dir@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| libtool_VERSION = @libtool_VERSION@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| lt_host_flags = @lt_host_flags@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| multi_basedir = @multi_basedir@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| port_specific_symbol_files = @port_specific_symbol_files@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| python_mod_dir = @python_mod_dir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| sysconfdir = @sysconfdir@ |
| target = @target@ |
| target_alias = @target_alias@ |
| target_cpu = @target_cpu@ |
| target_os = @target_os@ |
| target_vendor = @target_vendor@ |
| thread_header = @thread_header@ |
| tmake_file = @tmake_file@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| toplevel_builddir = @toplevel_builddir@ |
| toplevel_srcdir = @toplevel_srcdir@ |
| |
| # May be used by various substitution variables. |
| gcc_version := $(shell @get_gcc_base_ver@ $(top_srcdir)/../gcc/BASE-VER) |
| MAINT_CHARSET = latin1 |
| mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs |
| PWD_COMMAND = $${PWDCMD-pwd} |
| STAMP = echo timestamp > |
| toolexecdir = $(glibcxx_toolexecdir) |
| toolexeclibdir = $(glibcxx_toolexeclibdir) |
| @ENABLE_WERROR_FALSE@WERROR_FLAG = |
| @ENABLE_WERROR_TRUE@WERROR_FLAG = -Werror |
| @ENABLE_EXTERN_TEMPLATE_FALSE@XTEMPLATE_FLAGS = |
| @ENABLE_EXTERN_TEMPLATE_TRUE@XTEMPLATE_FLAGS = -fno-implicit-templates |
| @GLIBCXX_LDBL_ALT128_COMPAT_FALSE@LDBL_128_FLAGS = |
| @GLIBCXX_LDBL_ALT128_COMPAT_TRUE@LDBL_128_FLAGS = $(LONG_DOUBLE_128_FLAGS) |
| |
| # These bits are all figured out from configure. Look in acinclude.m4 |
| # or configure.ac to see how they are set. See GLIBCXX_EXPORT_FLAGS. |
| CONFIG_CXXFLAGS = \ |
| $(SECTION_FLAGS) $(HWCAP_CFLAGS) -frandom-seed=$@ $(LDBL_128_FLAGS) |
| |
| WARN_CXXFLAGS = \ |
| $(WARN_FLAGS) $(WERROR_FLAG) -fdiagnostics-show-location=once |
| |
| |
| # -I/-D flags to pass when compiling. |
| AM_CPPFLAGS = $(GLIBCXX_INCLUDES) $(CPPFLAGS) |
| @ENABLE_FILESYSTEM_TS_FALSE@filesystem_dir = |
| @ENABLE_FILESYSTEM_TS_TRUE@filesystem_dir = filesystem |
| SUBDIRS = c++98 c++11 c++17 c++20 $(filesystem_dir) |
| @VTV_CYGMIN_FALSE@toolexeclib_LTLIBRARIES = libstdc++.la |
| |
| # Cross compiler support. |
| @VTV_CYGMIN_TRUE@toolexeclib_LTLIBRARIES = libvtv.la libstdc++.la |
| @VTV_CYGMIN_TRUE@libvtv_la_SOURCES = vtv_stubs.cc |
| @VTV_CYGMIN_TRUE@libvtv_la_LDFLAGS = $(lt_host_flags) |
| @VTV_CYGMIN_TRUE@libvtv_la_AM_CXXFLAGS = \ |
| @VTV_CYGMIN_TRUE@ $(glibcxx_compiler_pic_flag) \ |
| @VTV_CYGMIN_TRUE@ $(XTEMPLATE_FLAGS) \ |
| @VTV_CYGMIN_TRUE@ -Wl,-u_vtable_map_vars_start,-u_vtable_map_vars_end \ |
| @VTV_CYGMIN_TRUE@ $(WARN_CXXFLAGS) $(OPTIMIZE_CXXFLAGS) $(CONFIG_CXXFLAGS) |
| |
| @VTV_CYGMIN_TRUE@libvtv_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \ |
| @VTV_CYGMIN_TRUE@ $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(libvtv_la_AM_CXXFLAGS) \ |
| @VTV_CYGMIN_TRUE@ $(CXXFLAGS) $(libvtv_la_LDFLAGS) $(LDFLAGS) -o $@ |
| |
| @GLIBCXX_LDBL_COMPAT_FALSE@ldbl_compat_sources = |
| @GLIBCXX_LDBL_COMPAT_TRUE@ldbl_compat_sources = compatibility-ldbl.cc |
| @ENABLE_DUAL_ABI_FALSE@@GLIBCXX_LDBL_ALT128_COMPAT_TRUE@ldbl_alt128_compat_cxx11_sources = |
| @ENABLE_DUAL_ABI_TRUE@@GLIBCXX_LDBL_ALT128_COMPAT_TRUE@ldbl_alt128_compat_cxx11_sources = \ |
| @ENABLE_DUAL_ABI_TRUE@@GLIBCXX_LDBL_ALT128_COMPAT_TRUE@ compatibility-ldbl-alt128-cxx11.cc |
| |
| @GLIBCXX_LDBL_ALT128_COMPAT_FALSE@ldbl_alt128_compat_sources = |
| @GLIBCXX_LDBL_ALT128_COMPAT_TRUE@ldbl_alt128_compat_sources = \ |
| @GLIBCXX_LDBL_ALT128_COMPAT_TRUE@ compatibility-ldbl-alt128.cc \ |
| @GLIBCXX_LDBL_ALT128_COMPAT_TRUE@ ${ldbl_alt128_compat_cxx11_sources} |
| |
| parallel_compat_sources = \ |
| compatibility-parallel_list.cc compatibility-parallel_list-2.cc |
| |
| cxx98_sources = \ |
| compatibility.cc \ |
| compatibility-debug_list.cc \ |
| compatibility-debug_list-2.cc \ |
| ${ldbl_compat_sources} |
| |
| cxx11_sources = \ |
| compatibility-c++0x.cc \ |
| compatibility-atomic-c++0x.cc \ |
| compatibility-thread-c++0x.cc \ |
| compatibility-chrono.cc \ |
| compatibility-condvar.cc \ |
| ${ldbl_alt128_compat_sources} |
| |
| libstdc___la_SOURCES = $(cxx98_sources) $(cxx11_sources) |
| libstdc___la_LIBADD = \ |
| $(GLIBCXX_LIBS) \ |
| $(top_builddir)/libsupc++/libsupc++convenience.la \ |
| $(top_builddir)/src/c++98/libc++98convenience.la \ |
| $(top_builddir)/src/c++11/libc++11convenience.la \ |
| $(top_builddir)/src/c++17/libc++17convenience.la \ |
| $(top_builddir)/src/c++20/libc++20convenience.la |
| |
| libstdc___la_DEPENDENCIES = \ |
| ${version_dep} \ |
| $(top_builddir)/libsupc++/libsupc++convenience.la \ |
| $(top_builddir)/src/c++98/libc++98convenience.la \ |
| $(top_builddir)/src/c++11/libc++11convenience.la \ |
| $(top_builddir)/src/c++17/libc++17convenience.la \ |
| $(top_builddir)/src/c++20/libc++20convenience.la |
| |
| libstdc___la_LDFLAGS = \ |
| -version-info $(libtool_VERSION) ${version_arg} -lm |
| |
| libstdc___la_LINK = $(CXXLINK) $(libstdc___la_LDFLAGS) $(lt_host_flags) |
| @GLIBCXX_LDBL_ALT128_COMPAT_FALSE@@GLIBCXX_LDBL_COMPAT_TRUE@LTCXXCOMPILE64 = $(LTCXXCOMPILE) |
| |
| # Use special rules for compatibility-ldbl.cc compilation, as we need to |
| # pass -mlong-double-64, and not use -mabi={ieee,ibm}longdouble. |
| @GLIBCXX_LDBL_ALT128_COMPAT_TRUE@@GLIBCXX_LDBL_COMPAT_TRUE@LTCXXCOMPILE64 = \ |
| @GLIBCXX_LDBL_ALT128_COMPAT_TRUE@@GLIBCXX_LDBL_COMPAT_TRUE@ $(filter-out -mabi=ieeelongdouble -mabi=ibmlongdouble,$(LTCXXCOMPILE)) |
| |
| @GLIBCXX_LDBL_ALT128_COMPAT_FALSE@@GLIBCXX_LDBL_COMPAT_TRUE@CXXCOMPILE64 = $(CXXCOMPILE) |
| @GLIBCXX_LDBL_ALT128_COMPAT_TRUE@@GLIBCXX_LDBL_COMPAT_TRUE@CXXCOMPILE64 = \ |
| @GLIBCXX_LDBL_ALT128_COMPAT_TRUE@@GLIBCXX_LDBL_COMPAT_TRUE@ $(filter-out -mabi=ieeelongdouble -mabi=ibmlongdouble,$(CXXCOMPILE)) |
| |
| |
| # A note on compatibility and static libraries. |
| # |
| # static lib == linked against only this version, should not need compat |
| # shared lib == linked against potentially all compat versions |
| # |
| # Thus, the shared libs have more compat symbols, which can be found |
| # segregated in the sources with -D_GLIBCXX_SHARED. |
| # |
| # In the sub-directories of libsupc++, src/c++98, src/c++11, src/c++17, |
| # src/c++20, only -prefer-pic objects are generated for the convenience |
| # libraries. |
| # |
| # In the main src directory, make shared and static objects just for |
| # the compat libraries. Shared objects are compiled with -prefer-pic |
| # -D_GLIBCXX_SHARED and in the .libs sub-directory, static objects are |
| # compiled with -prefer-pic (ie, -fPIC but not -D_GLIBCXX_SHARED) and |
| # the main src directory. |
| # |
| # Why are objects destined for libstdc++.a compiled with -fPIC? First, |
| # because -fPIC is not harmful to use for objects destined for static |
| # libraries. In addition, using -fPIC will allow the use of static |
| # libstdc++.a in the creation of other C++ shared libraries. |
| |
| # AM_CXXFLAGS needs to be in each sub-directory so that it can be |
| # modified in a per-library or per-sub-library way. Need to manually |
| # set this option because CONFIG_CXXFLAGS has to be after |
| # OPTIMIZE_CXXFLAGS on the compile line so that -O2 can be overridden |
| # as the occasion calls for it. |
| AM_CXXFLAGS_PRE = \ |
| -std=gnu++98 \ |
| $(glibcxx_compiler_pic_flag) \ |
| $(XTEMPLATE_FLAGS) $(VTV_CXXFLAGS) \ |
| $(WARN_CXXFLAGS) $(OPTIMIZE_CXXFLAGS) $(CONFIG_CXXFLAGS) |
| |
| AM_CXXFLAGS = $(filter-out -fvtable-verify=std,$(AM_CXXFLAGS_PRE)) |
| |
| # Libtool notes |
| |
| # 1) In general, libtool expects an argument such as `--tag=CXX' when |
| # using the C++ compiler, because that will enable the settings |
| # detected when C++ support was being configured. However, when no |
| # such flag is given in the command line, libtool attempts to figure |
| # it out by matching the compiler name in each configuration section |
| # against a prefix of the command line. The problem is that, if the |
| # compiler name and its initial flags stored in the libtool |
| # configuration file don't match those in the command line, libtool |
| # can't decide which configuration to use, and it gives up. The |
| # correct solution is to add `--tag CXX' to LTCXXCOMPILE and maybe |
| # CXXLINK, just after $(LIBTOOL), so that libtool doesn't have to |
| # attempt to infer which configuration to use. |
| # |
| # The second tag argument, `--tag disable-shared` means that libtool |
| # only compiles each source once, for static objects. In actuality, |
| # glibcxx_lt_pic_flag and glibcxx_compiler_shared_flag are added to |
| # the libtool command that is used create the object, which is |
| # suitable for shared libraries. The `--tag disable-shared` must be |
| # placed after --tag CXX lest things CXX undo the affect of |
| # disable-shared. |
| |
| # 2) Need to explicitly set LTCXXCOMPILE so that EXTRA_CXX_FLAGS is |
| # last. (That way, things like -O2 passed down from the toplevel can |
| # be overridden by --enable-debug and --enable-cxx-flags.) |
| LTCXXCOMPILE = \ |
| $(LIBTOOL) --tag CXX \ |
| $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ |
| --mode=compile $(CXX) $(INCLUDES) \ |
| $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) $(EXTRA_CXX_FLAGS) |
| |
| LTLDFLAGS = $(shell $(SHELL) $(top_srcdir)/../libtool-ldflags $(LDFLAGS)) |
| |
| # 3) We'd have a problem when building the shared libstdc++ object if |
| # the rules automake generates would be used. We cannot allow g++ to |
| # be used since this would add -lstdc++ to the link line which of |
| # course is problematic at this point. So, we get the top-level |
| # directory to configure libstdc++-v3 to use gcc as the C++ |
| # compilation driver. |
| CXXLINK = \ |
| $(LIBTOOL) --tag CXX \ |
| $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ |
| --mode=link $(CXX) \ |
| $(VTV_CXXLINKFLAGS) \ |
| $(OPT_LDFLAGS) $(SECTION_LDFLAGS) $(AM_CXXFLAGS) $(LTLDFLAGS) -o $@ |
| |
| @ENABLE_SYMVERS_TRUE@CLEANFILES = libstdc++-symbols.ver $(version_dep) |
| @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,-exported_symbols_list,libstdc++-symbols.explist |
| @ENABLE_SYMVERS_FALSE@version_arg = |
| @ENABLE_SYMVERS_GNU_NAMESPACE_TRUE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,--version-script=libstdc++-symbols.ver |
| @ENABLE_SYMVERS_GNU_TRUE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,--version-script=libstdc++-symbols.ver |
| @ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,-M,libstdc++-symbols.ver-sun |
| @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.explist |
| @ENABLE_SYMVERS_FALSE@version_dep = |
| @ENABLE_SYMVERS_GNU_NAMESPACE_TRUE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.ver |
| @ENABLE_SYMVERS_GNU_TRUE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.ver |
| @ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.ver-sun |
| @GLIBCXX_BUILD_DEBUG_FALSE@STAMP_DEBUG = |
| |
| # Added rules. |
| # 1 debug library |
| # 2 supra-convenience library |
| @GLIBCXX_BUILD_DEBUG_TRUE@STAMP_DEBUG = build-debug |
| @GLIBCXX_BUILD_DEBUG_FALSE@STAMP_INSTALL_DEBUG = |
| @GLIBCXX_BUILD_DEBUG_TRUE@STAMP_INSTALL_DEBUG = install-debug |
| @GLIBCXX_BUILD_DEBUG_FALSE@CLEAN_DEBUG = |
| @GLIBCXX_BUILD_DEBUG_TRUE@CLEAN_DEBUG = debug |
| |
| # Build a debug variant. |
| # Take care to fix all possibly-relative paths. |
| debugdir = ${glibcxx_builddir}/src/debug |
| all: all-recursive |
| |
| .SUFFIXES: |
| .SUFFIXES: .cc .lo .o .obj |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ |
| && { if test -f $@; then exit 0; else break; fi; }; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps src/Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign --ignore-deps src/Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| esac; |
| $(top_srcdir)/fragment.am $(am__empty): |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(am__aclocal_m4_deps): |
| |
| install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES) |
| @$(NORMAL_INSTALL) |
| @list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \ |
| list2=; for p in $$list; do \ |
| if test -f $$p; then \ |
| list2="$$list2 $$p"; \ |
| else :; fi; \ |
| done; \ |
| test -z "$$list2" || { \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(toolexeclibdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)" || exit 1; \ |
| echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(toolexeclibdir)'"; \ |
| $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(toolexeclibdir)"; \ |
| } |
| |
| uninstall-toolexeclibLTLIBRARIES: |
| @$(NORMAL_UNINSTALL) |
| @list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \ |
| for p in $$list; do \ |
| $(am__strip_dir) \ |
| echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(toolexeclibdir)/$$f'"; \ |
| $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(toolexeclibdir)/$$f"; \ |
| done |
| |
| clean-toolexeclibLTLIBRARIES: |
| -test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES) |
| @list='$(toolexeclib_LTLIBRARIES)'; \ |
| locs=`for p in $$list; do echo $$p; done | \ |
| sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ |
| sort -u`; \ |
| test -z "$$locs" || { \ |
| echo rm -f $${locs}; \ |
| rm -f $${locs}; \ |
| } |
| |
| libstdc++.la: $(libstdc___la_OBJECTS) $(libstdc___la_DEPENDENCIES) $(EXTRA_libstdc___la_DEPENDENCIES) |
| $(AM_V_GEN)$(libstdc___la_LINK) $(am_libstdc___la_rpath) $(libstdc___la_OBJECTS) $(libstdc___la_LIBADD) $(LIBS) |
| |
| libvtv.la: $(libvtv_la_OBJECTS) $(libvtv_la_DEPENDENCIES) $(EXTRA_libvtv_la_DEPENDENCIES) |
| $(AM_V_GEN)$(libvtv_la_LINK) $(am_libvtv_la_rpath) $(libvtv_la_OBJECTS) $(libvtv_la_LIBADD) $(LIBS) |
| |
| mostlyclean-compile: |
| -rm -f *.$(OBJEXT) |
| |
| distclean-compile: |
| -rm -f *.tab.c |
| |
| .cc.o: |
| $(AM_V_CXX)$(CXXCOMPILE) -c -o $@ $< |
| |
| .cc.obj: |
| $(AM_V_CXX)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` |
| |
| .cc.lo: |
| $(AM_V_CXX)$(LTCXXCOMPILE) -c -o $@ $< |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run 'make' without going through this Makefile. |
| # To change the values of 'make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in 'config.status', edit 'config.status' |
| # (which will cause the Makefiles to be regenerated when you run 'make'); |
| # (2) otherwise, pass the desired values on the 'make' command line. |
| $(am__recursive_targets): |
| @fail=; \ |
| if $(am__make_keepgoing); then \ |
| failcom='fail=yes'; \ |
| else \ |
| failcom='exit 1'; \ |
| fi; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| ID: $(am__tagged_files) |
| $(am__define_uniq_tagged_files); mkid -fID $$unique |
| tags: tags-recursive |
| TAGS: tags |
| |
| tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| set x; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| $(am__define_uniq_tagged_files); \ |
| shift; \ |
| if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| if test $$# -gt 0; then \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| "$$@" $$unique; \ |
| else \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$unique; \ |
| fi; \ |
| fi |
| ctags: ctags-recursive |
| |
| CTAGS: ctags |
| ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| $(am__define_uniq_tagged_files); \ |
| test -z "$(CTAGS_ARGS)$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && $(am__cd) $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) "$$here" |
| cscopelist: cscopelist-recursive |
| |
| cscopelist-am: $(am__tagged_files) |
| list='$(am__tagged_files)'; \ |
| case "$(srcdir)" in \ |
| [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ |
| *) sdir=$(subdir)/$(srcdir) ;; \ |
| esac; \ |
| for i in $$list; do \ |
| if test -f "$$i"; then \ |
| echo "$(subdir)/$$i"; \ |
| else \ |
| echo "$$sdir/$$i"; \ |
| fi; \ |
| done >> $(top_builddir)/cscope.files |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| check-am: all-am |
| check: check-recursive |
| all-am: Makefile $(LTLIBRARIES) all-local |
| installdirs: installdirs-recursive |
| installdirs-am: |
| for dir in "$(DESTDIR)$(toolexeclibdir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| if test -z '$(STRIP)'; then \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| install; \ |
| else \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| fi |
| mostlyclean-generic: |
| |
| clean-generic: |
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-recursive |
| |
| clean-am: clean-generic clean-libtool clean-local \ |
| clean-toolexeclibLTLIBRARIES mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f Makefile |
| distclean-am: clean-am distclean-compile distclean-generic \ |
| distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| html: html-recursive |
| |
| html-am: |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: install-data-local |
| |
| install-dvi: install-dvi-recursive |
| |
| install-dvi-am: |
| |
| install-exec-am: install-toolexeclibLTLIBRARIES |
| |
| install-html: install-html-recursive |
| |
| install-html-am: |
| |
| install-info: install-info-recursive |
| |
| install-info-am: |
| |
| install-man: |
| |
| install-pdf: install-pdf-recursive |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-recursive |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-compile mostlyclean-generic \ |
| mostlyclean-libtool |
| |
| pdf: pdf-recursive |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: uninstall-toolexeclibLTLIBRARIES |
| |
| .MAKE: $(am__recursive_targets) install-am install-strip |
| |
| .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \ |
| check check-am clean clean-generic clean-libtool clean-local \ |
| clean-toolexeclibLTLIBRARIES cscopelist-am ctags ctags-am \ |
| distclean distclean-compile distclean-generic \ |
| distclean-libtool distclean-tags dvi dvi-am html html-am info \ |
| info-am install install-am install-data install-data-am \ |
| install-data-local install-dvi install-dvi-am install-exec \ |
| install-exec-am install-html install-html-am install-info \ |
| install-info-am install-man install-pdf install-pdf-am \ |
| install-ps install-ps-am install-strip \ |
| install-toolexeclibLTLIBRARIES installcheck installcheck-am \ |
| installdirs installdirs-am maintainer-clean \ |
| maintainer-clean-generic mostlyclean mostlyclean-compile \ |
| mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ |
| tags tags-am uninstall uninstall-am \ |
| uninstall-toolexeclibLTLIBRARIES |
| |
| .PRECIOUS: Makefile |
| |
| |
| @VTV_CYGMIN_TRUE@vtv_stubs.cc: |
| @VTV_CYGMIN_TRUE@ rm -f $@ |
| @VTV_CYGMIN_TRUE@ $(LN_S) $(toplevel_srcdir)/libstdc++-v3/libsupc++/vtv_stubs.cc $@ |
| |
| vpath % $(top_srcdir)/src/c++98 |
| vpath % $(top_srcdir)/src/c++11 |
| vpath % $(top_srcdir)/src/c++17 |
| vpath % $(top_srcdir)/src/c++20 |
| @ENABLE_FILESYSTEM_TS_TRUE@vpath % $(top_srcdir)/src/filesystem |
| @GLIBCXX_LDBL_COMPAT_TRUE@compatibility-ldbl.lo: compatibility-ldbl.cc |
| @GLIBCXX_LDBL_COMPAT_TRUE@ $(LTCXXCOMPILE64) $(LONG_DOUBLE_COMPAT_FLAGS) -c $< |
| @GLIBCXX_LDBL_COMPAT_TRUE@compatibility-ldbl.o: compatibility-ldbl.cc |
| @GLIBCXX_LDBL_COMPAT_TRUE@ $(CXXCOMPILE64) $(LONG_DOUBLE_COMPAT_FLAGS) -c $< |
| |
| # Use special rules for compatibility-ldbl-alt128.cc compilation, as we need to |
| # ensure it is compiled with the correct flag. |
| @GLIBCXX_LDBL_ALT128_COMPAT_TRUE@compatibility-ldbl-alt128.lo: compatibility-ldbl-alt128.cc |
| @GLIBCXX_LDBL_ALT128_COMPAT_TRUE@ $(LTCXXCOMPILE) $(LONG_DOUBLE_ALT128_COMPAT_FLAGS) -std=gnu++11 -c $< |
| @GLIBCXX_LDBL_ALT128_COMPAT_TRUE@compatibility-ldbl-alt128.o: compatibility-ldbl-alt128.cc |
| @GLIBCXX_LDBL_ALT128_COMPAT_TRUE@ $(CXXCOMPILE) $(LONG_DOUBLE_ALT128_COMPAT_FLAGS) -std=gnu++11 -c $< |
| @ENABLE_DUAL_ABI_TRUE@@GLIBCXX_LDBL_ALT128_COMPAT_TRUE@compatibility-ldbl-alt128-cxx11.lo: compatibility-ldbl-alt128-cxx11.cc |
| @ENABLE_DUAL_ABI_TRUE@@GLIBCXX_LDBL_ALT128_COMPAT_TRUE@ $(LTCXXCOMPILE) $(LONG_DOUBLE_ALT128_COMPAT_FLAGS) -std=gnu++11 -c $< |
| @ENABLE_DUAL_ABI_TRUE@@GLIBCXX_LDBL_ALT128_COMPAT_TRUE@compatibility-ldbl-alt128-cxx11.o: compatibility-ldbl-alt128-cxx11.cc |
| @ENABLE_DUAL_ABI_TRUE@@GLIBCXX_LDBL_ALT128_COMPAT_TRUE@ $(CXXCOMPILE) $(LONG_DOUBLE_ALT128_COMPAT_FLAGS) -std=gnu++11 -c $< |
| |
| # Use special rules for C++11 files/objects. |
| compatibility-c++0x.lo: compatibility-c++0x.cc |
| $(LTCXXCOMPILE) -std=gnu++11 -c $< |
| compatibility-c++0x.o: compatibility-c++0x.cc |
| $(CXXCOMPILE) -std=gnu++11 -c $< |
| |
| compatibility-atomic-c++0x.lo: compatibility-atomic-c++0x.cc |
| $(LTCXXCOMPILE) -std=gnu++11 -c $< |
| compatibility-atomic-c++0x.o: compatibility-atomic-c++0x.cc |
| $(CXXCOMPILE) -std=gnu++11 -c $< |
| |
| compatibility-thread-c++0x.lo: compatibility-thread-c++0x.cc |
| $(LTCXXCOMPILE) -std=gnu++11 -c $< |
| compatibility-thread-c++0x.o: compatibility-thread-c++0x.cc |
| $(CXXCOMPILE) -std=gnu++11 -c $< |
| |
| compatibility-chrono.lo: compatibility-chrono.cc |
| $(LTCXXCOMPILE) -std=gnu++11 -c $< |
| compatibility-chrono.o: compatibility-chrono.cc |
| $(CXXCOMPILE) -std=gnu++11 -c $< |
| |
| compatibility-condvar.lo: compatibility-condvar.cc |
| $(LTCXXCOMPILE) -std=gnu++11 -c $< |
| compatibility-condvar.o: compatibility-condvar.cc |
| $(CXXCOMPILE) -std=gnu++11 -c $< |
| |
| # Symbol versioning for shared libraries. |
| @ENABLE_SYMVERS_TRUE@libstdc++-symbols.ver: ${glibcxx_srcdir}/$(SYMVER_FILE) \ |
| @ENABLE_SYMVERS_TRUE@ $(port_specific_symbol_files) |
| @ENABLE_SYMVERS_TRUE@ cp ${glibcxx_srcdir}/$(SYMVER_FILE) $@.tmp |
| @ENABLE_SYMVERS_TRUE@ chmod +w $@.tmp |
| @ENABLE_SYMVERS_TRUE@ if test "x$(port_specific_symbol_files)" != x; then \ |
| @ENABLE_SYMVERS_TRUE@ if grep '^# Appended to version file.' \ |
| @ENABLE_SYMVERS_TRUE@ $(port_specific_symbol_files) > /dev/null 2>&1; then \ |
| @ENABLE_SYMVERS_TRUE@ cat $(port_specific_symbol_files) >> $@.tmp; \ |
| @ENABLE_SYMVERS_TRUE@ else \ |
| @ENABLE_SYMVERS_TRUE@ sed -n '1,/DO NOT DELETE/p' $@.tmp > tmp.top; \ |
| @ENABLE_SYMVERS_TRUE@ sed -n '/DO NOT DELETE/,$$p' $@.tmp > tmp.bottom; \ |
| @ENABLE_SYMVERS_TRUE@ cat tmp.top $(port_specific_symbol_files) tmp.bottom > $@.tmp; \ |
| @ENABLE_SYMVERS_TRUE@ rm tmp.top tmp.bottom; \ |
| @ENABLE_SYMVERS_TRUE@ fi; \ |
| @ENABLE_SYMVERS_TRUE@ fi |
| @ENABLE_SYMVERS_TRUE@ $(EGREP) -v '^[ ]*#(#| |$$)' $@.tmp | \ |
| @ENABLE_SYMVERS_TRUE@ $(CC) -E -P -include $(CONFIG_HEADER) - > $@ || (rm -f $@ ; exit 1) |
| @ENABLE_SYMVERS_TRUE@ rm -f $@.tmp |
| @ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@libstdc++-symbols.ver-sun : libstdc++-symbols.ver \ |
| @ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@ $(toplevel_srcdir)/contrib/make_sunver.pl \ |
| @ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@ $(libstdc___la_OBJECTS) $(libstdc___la_LIBADD) |
| @ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@ CXXFILT="$(CXXFILT)"; export CXXFILT; \ |
| @ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@ perl $(toplevel_srcdir)/contrib/make_sunver.pl \ |
| @ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@ libstdc++-symbols.ver \ |
| @ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@ $(libstdc___la_OBJECTS:%.lo=.libs/%.o) \ |
| @ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@ `echo ' $(libstdc___la_LIBADD) ' | \ |
| @ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@ sed -e 's,/\([^/.]*\)\.la,/.libs/\1.a,g' -e 's/ -l[^ ]* / /'` \ |
| @ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@ > $@ || (rm -f $@ ; exit 1) |
| @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@libstdc++-symbols.explist : libstdc++-symbols.ver \ |
| @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ ${glibcxx_srcdir}/scripts/make_exports.pl \ |
| @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ $(libstdc___la_OBJECTS) $(libstdc___la_LIBADD) |
| @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ perl ${glibcxx_srcdir}/scripts/make_exports.pl \ |
| @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ libstdc++-symbols.ver \ |
| @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ $(libstdc___la_OBJECTS:%.lo=.libs/%.o) \ |
| @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ `echo $(libstdc___la_LIBADD) | \ |
| @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ sed 's,/\([^/.]*\)\.la,/.libs/\1.a,g'` \ |
| @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ > $@ || (rm -f $@ ; exit 1) |
| |
| # Control additional build primary rules. |
| all-once: libstdc++convenience.la $(STAMP_DEBUG) |
| install-data-once: $(STAMP_INSTALL_DEBUG) |
| |
| all-local: all-once |
| install-data-local: install-data-once |
| clean-local: |
| rm -rf libstdc++convenience.la stamp* $(CLEAN_DEBUG) |
| |
| # Make a non-installed convenience library, so that --disable-static |
| # may work. |
| libstdc++convenience.la: $(toolexeclib_LTLIBRARIES) |
| $(CXXLINK) $(libstdc___la_LIBADD) $(LIBS); \ |
| if test ! -f .libs/libstdc++.a; then \ |
| cp .libs/libstdc++convenience.a .libs/libstdc++.a; \ |
| fi; \ |
| echo `date` > stamp-libstdc++convenience; |
| stamp-debug: Makefile $(foreach dir,$(SUBDIRS),$(dir)/Makefile) |
| if test ! -d ${debugdir} || test ! -f ${debugdir}/Makefile ; then \ |
| mkdir -p ${debugdir}; \ |
| for d in $(SUBDIRS); do mkdir -p ${debugdir}/$$d; done; \ |
| (cd ${debugdir}; \ |
| sed -e 's/top_builddir = \.\./top_builddir = ..\/../' \ |
| -e 's/top_build_prefix = \.\./top_build_prefix = ..\/../' \ |
| -e 's/srcdir = \.\./srcdir = ..\/../' \ |
| -e 's/VPATH = \.\./VPATH = ..\/../' \ |
| -e 's/glibcxx_basedir = \.\./glibcxx_basedir = ..\/../' \ |
| -e 's/MKDIR_P = \.\./MKDIR_P = ..\/../' \ |
| < ../Makefile > Makefile ; \ |
| for d in . $(SUBDIRS); do \ |
| sed -e 's/top_builddir = \.\./top_builddir = ..\/../' \ |
| -e 's/top_build_prefix = \.\./top_build_prefix = ..\/../' \ |
| -e 's/srcdir = \.\./srcdir = ..\/../' \ |
| -e 's/VPATH = \.\./VPATH = ..\/../' \ |
| -e 's/glibcxx_basedir = \.\./glibcxx_basedir = ..\/../' \ |
| -e 's/MKDIR_P = \.\./MKDIR_P = ..\/../' \ |
| < ../$$d/Makefile > $$d/Makefile ; \ |
| done) ; \ |
| fi; \ |
| echo `date` > stamp-debug; |
| |
| build-debug: stamp-debug |
| (cd ${debugdir}; \ |
| mv Makefile Makefile.tmp; \ |
| sed -e 's,all-local: all-once,all-local:,' \ |
| -e 's,install-data-local: install-data-once,install-data-local:,' \ |
| -e '/vpath/!s,src/c,src/debug/c,' \ |
| < Makefile.tmp > Makefile ; \ |
| rm -f Makefile.tmp ; \ |
| $(MAKE) CXXFLAGS='$(DEBUG_FLAGS)' \ |
| toolexeclibdir=$(glibcxx_toolexeclibdir)/debug all) ; |
| |
| # Install debug library. |
| install-debug: build-debug |
| (cd ${debugdir} && $(MAKE) CXXFLAGS='$(DEBUG_FLAGS)' \ |
| toolexeclibdir=$(glibcxx_toolexeclibdir)/debug install) ; |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
