Google Git
Sign in
gnu / gcc / 737cee66f221eb8de21f0e41affc4b13cb7c0feb / . / gcc / expmed.c
blob: 291e8d4aeeab1d8ecc15f4b435417be1b8be2495 [file] [log] [blame]
/* Medium-level subroutines: convert bit-field store and extract
and shifts, multiplies and divides to rtl instructions.
Copyright (C) 1987, 88, 89, 92-6, 1997 Free Software Foundation, Inc.
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
#include "config.h"
#include "rtl.h"
#include "tree.h"
#include "flags.h"
#include "insn-flags.h"
#include "insn-codes.h"
#include "insn-config.h"
#include "expr.h"
#include "real.h"
#include "recog.h"
static void store_fixed_bit_field PROTO((rtx, int, int, int, rtx, int));
static void store_split_bit_field PROTO((rtx, int, int, rtx, int));
static rtx extract_fixed_bit_field PROTO((enum machine_mode, rtx, int,
int, int, rtx, int, int));
static rtx mask_rtx PROTO((enum machine_mode, int,
int, int));
static rtx lshift_value PROTO((enum machine_mode, rtx,
int, int));
static rtx extract_split_bit_field PROTO((rtx, int, int, int, int));
#define CEIL(x,y) (((x) + (y) - 1) / (y))
/* Non-zero means divides or modulus operations are relatively cheap for
powers of two, so don't use branches; emit the operation instead.
Usually, this will mean that the MD file will emit non-branch
sequences. */
static int sdiv_pow2_cheap, smod_pow2_cheap;
#ifndef SLOW_UNALIGNED_ACCESS
#define SLOW_UNALIGNED_ACCESS STRICT_ALIGNMENT
#endif
/* For compilers that support multiple targets with different word sizes,
MAX_BITS_PER_WORD contains the biggest value of BITS_PER_WORD. An example
is the H8/300(H) compiler. */
#ifndef MAX_BITS_PER_WORD
#define MAX_BITS_PER_WORD BITS_PER_WORD
#endif
/* Cost of various pieces of RTL. Note that some of these are indexed by shift count,
and some by mode. */
static int add_cost, negate_cost, zero_cost;
static int shift_cost[MAX_BITS_PER_WORD];
static int shiftadd_cost[MAX_BITS_PER_WORD];
static int shiftsub_cost[MAX_BITS_PER_WORD];
static int mul_cost[NUM_MACHINE_MODES];
static int div_cost[NUM_MACHINE_MODES];
static int mul_widen_cost[NUM_MACHINE_MODES];
static int mul_highpart_cost[NUM_MACHINE_MODES];
void
init_expmed ()
{
char *free_point;
/* This is "some random pseudo register" for purposes of calling recog
to see what insns exist. */
rtx reg = gen_rtx (REG, word_mode, 10000);
rtx shift_insn, shiftadd_insn, shiftsub_insn;
int dummy;
int m;
enum machine_mode mode, wider_mode;
start_sequence ();
/* Since we are on the permanent obstack, we must be sure we save this
spot AFTER we call start_sequence, since it will reuse the rtl it
makes. */
free_point = (char *) oballoc (0);
zero_cost = rtx_cost (const0_rtx, 0);
add_cost = rtx_cost (gen_rtx (PLUS, word_mode, reg, reg), SET);
shift_insn = emit_insn (gen_rtx (SET, VOIDmode, reg,
gen_rtx (ASHIFT, word_mode, reg,
const0_rtx)));
shiftadd_insn = emit_insn (gen_rtx (SET, VOIDmode, reg,
gen_rtx (PLUS, word_mode,
gen_rtx (MULT, word_mode,
reg, const0_rtx),
reg)));
shiftsub_insn = emit_insn (gen_rtx (SET, VOIDmode, reg,
gen_rtx (MINUS, word_mode,
gen_rtx (MULT, word_mode,
reg, const0_rtx),
reg)));
init_recog ();
shift_cost[0] = 0;
shiftadd_cost[0] = shiftsub_cost[0] = add_cost;
for (m = 1; m < BITS_PER_WORD; m++)
{
shift_cost[m] = shiftadd_cost[m] = shiftsub_cost[m] = 32000;
XEXP (SET_SRC (PATTERN (shift_insn)), 1) = GEN_INT (m);
if (recog (PATTERN (shift_insn), shift_insn, &dummy) >= 0)
shift_cost[m] = rtx_cost (SET_SRC (PATTERN (shift_insn)), SET);
XEXP (XEXP (SET_SRC (PATTERN (shiftadd_insn)), 0), 1)
= GEN_INT ((HOST_WIDE_INT) 1 << m);
if (recog (PATTERN (shiftadd_insn), shiftadd_insn, &dummy) >= 0)
shiftadd_cost[m] = rtx_cost (SET_SRC (PATTERN (shiftadd_insn)), SET);
XEXP (XEXP (SET_SRC (PATTERN (shiftsub_insn)), 0), 1)
= GEN_INT ((HOST_WIDE_INT) 1 << m);
if (recog (PATTERN (shiftsub_insn), shiftsub_insn, &dummy) >= 0)
shiftsub_cost[m] = rtx_cost (SET_SRC (PATTERN (shiftsub_insn)), SET);
}
negate_cost = rtx_cost (gen_rtx (NEG, word_mode, reg), SET);
sdiv_pow2_cheap
= (rtx_cost (gen_rtx (DIV, word_mode, reg, GEN_INT (32)), SET)
<= 2 * add_cost);
smod_pow2_cheap
= (rtx_cost (gen_rtx (MOD, word_mode, reg, GEN_INT (32)), SET)
<= 2 * add_cost);
for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT);
mode != VOIDmode;
mode = GET_MODE_WIDER_MODE (mode))
{
reg = gen_rtx (REG, mode, 10000);
div_cost[(int) mode] = rtx_cost (gen_rtx (UDIV, mode, reg, reg), SET);
mul_cost[(int) mode] = rtx_cost (gen_rtx (MULT, mode, reg, reg), SET);
wider_mode = GET_MODE_WIDER_MODE (mode);
if (wider_mode != VOIDmode)
{
mul_widen_cost[(int) wider_mode]
= rtx_cost (gen_rtx (MULT, wider_mode,
gen_rtx (ZERO_EXTEND, wider_mode, reg),
gen_rtx (ZERO_EXTEND, wider_mode, reg)),
SET);
mul_highpart_cost[(int) mode]
= rtx_cost (gen_rtx (TRUNCATE, mode,
gen_rtx (LSHIFTRT, wider_mode,
gen_rtx (MULT, wider_mode,
gen_rtx (ZERO_EXTEND, wider_mode, reg),
gen_rtx (ZERO_EXTEND, wider_mode, reg)),
GEN_INT (GET_MODE_BITSIZE (mode)))),
SET);
}
}
/* Free the objects we just allocated. */
end_sequence ();
obfree (free_point);
}
/* Return an rtx representing minus the value of X.
MODE is the intended mode of the result,
useful if X is a CONST_INT. */
rtx
negate_rtx (mode, x)
enum machine_mode mode;
rtx x;
{
rtx result = simplify_unary_operation (NEG, mode, x, mode);
if (result == 0)
result = expand_unop (mode, neg_optab, x, NULL_RTX, 0);
return result;
}
/* Generate code to store value from rtx VALUE
into a bit-field within structure STR_RTX
containing BITSIZE bits starting at bit BITNUM.
FIELDMODE is the machine-mode of the FIELD_DECL node for this field.
ALIGN is the alignment that STR_RTX is known to have, measured in bytes.
TOTAL_SIZE is the size of the structure in bytes, or -1 if varying. */
/* ??? Note that there are two different ideas here for how
to determine the size to count bits within, for a register.
One is BITS_PER_WORD, and the other is the size of operand 3
of the insv pattern. (The latter assumes that an n-bit machine
will be able to insert bit fields up to n bits wide.)
It isn't certain that either of these is right.
extract_bit_field has the same quandary. */
rtx
store_bit_field (str_rtx, bitsize, bitnum, fieldmode, value, align, total_size)
rtx str_rtx;
register int bitsize;
int bitnum;
enum machine_mode fieldmode;
rtx value;
int align;
int total_size;
{
int unit = (GET_CODE (str_rtx) == MEM) ? BITS_PER_UNIT : BITS_PER_WORD;
register int offset = bitnum / unit;
register int bitpos = bitnum % unit;
register rtx op0 = str_rtx;
if (GET_CODE (str_rtx) == MEM && ! MEM_IN_STRUCT_P (str_rtx))
abort ();
/* Discount the part of the structure before the desired byte.
We need to know how many bytes are safe to reference after it. */
if (total_size >= 0)
total_size -= (bitpos / BIGGEST_ALIGNMENT
* (BIGGEST_ALIGNMENT / BITS_PER_UNIT));
while (GET_CODE (op0) == SUBREG)
{
/* The following line once was done only if WORDS_BIG_ENDIAN,
but I think that is a mistake. WORDS_BIG_ENDIAN is
meaningful at a much higher level; when structures are copied
between memory and regs, the higher-numbered regs
always get higher addresses. */
offset += SUBREG_WORD (op0);
/* We used to adjust BITPOS here, but now we do the whole adjustment
right after the loop. */
op0 = SUBREG_REG (op0);
}
/* If OP0 is a register, BITPOS must count within a word.
But as we have it, it counts within whatever size OP0 now has.
On a bigendian machine, these are not the same, so convert. */
if (BYTES_BIG_ENDIAN
&& GET_CODE (op0) != MEM
&& unit > GET_MODE_BITSIZE (GET_MODE (op0)))
bitpos += unit - GET_MODE_BITSIZE (GET_MODE (op0));
value = protect_from_queue (value, 0);
if (flag_force_mem)
value = force_not_mem (value);
/* Note that the adjustment of BITPOS above has no effect on whether
BITPOS is 0 in a REG bigger than a word. */
if (GET_MODE_SIZE (fieldmode) >= UNITS_PER_WORD
&& (GET_CODE (op0) != MEM
|| ! SLOW_UNALIGNED_ACCESS
|| (offset * BITS_PER_UNIT % bitsize == 0
&& align % GET_MODE_SIZE (fieldmode) == 0))
&& bitpos == 0 && bitsize == GET_MODE_BITSIZE (fieldmode))
{
/* Storing in a full-word or multi-word field in a register
can be done with just SUBREG. */
if (GET_MODE (op0) != fieldmode)
{
if (GET_CODE (op0) == REG)
op0 = gen_rtx (SUBREG, fieldmode, op0, offset);
else
op0 = change_address (op0, fieldmode,
plus_constant (XEXP (op0, 0), offset));
}
emit_move_insn (op0, value);
return value;
}
/* Storing an lsb-aligned field in a register
can be done with a movestrict instruction. */
if (GET_CODE (op0) != MEM
&& (BYTES_BIG_ENDIAN ? bitpos + bitsize == unit : bitpos == 0)
&& bitsize == GET_MODE_BITSIZE (fieldmode)
&& (GET_MODE (op0) == fieldmode
|| (movstrict_optab->handlers[(int) fieldmode].insn_code
!= CODE_FOR_nothing)))
{
/* Get appropriate low part of the value being stored. */
if (GET_CODE (value) == CONST_INT || GET_CODE (value) == REG)
value = gen_lowpart (fieldmode, value);
else if (!(GET_CODE (value) == SYMBOL_REF
|| GET_CODE (value) == LABEL_REF
|| GET_CODE (value) == CONST))
value = convert_to_mode (fieldmode, value, 0);
if (GET_MODE (op0) == fieldmode)
emit_move_insn (op0, value);
else
{
int icode = movstrict_optab->handlers[(int) fieldmode].insn_code;
if(! (*insn_operand_predicate[icode][1]) (value, fieldmode))
value = copy_to_mode_reg (fieldmode, value);
emit_insn (GEN_FCN (icode)
(gen_rtx (SUBREG, fieldmode, op0, offset), value));
}
return value;
}
/* Handle fields bigger than a word. */
if (bitsize > BITS_PER_WORD)
{
/* Here we transfer the words of the field
in the order least significant first.
This is because the most significant word is the one which may
be less than full.
However, only do that if the value is not BLKmode. */
int backwards = WORDS_BIG_ENDIAN && fieldmode != BLKmode;
int nwords = (bitsize + (BITS_PER_WORD - 1)) / BITS_PER_WORD;
int i;
/* This is the mode we must force value to, so that there will be enough
subwords to extract. Note that fieldmode will often (always?) be
VOIDmode, because that is what store_field uses to indicate that this
is a bit field, but passing VOIDmode to operand_subword_force will
result in an abort. */
fieldmode = mode_for_size (nwords * BITS_PER_WORD, MODE_INT, 0);
for (i = 0; i < nwords; i++)
{
/* If I is 0, use the low-order word in both field and target;
if I is 1, use the next to lowest word; and so on. */
int wordnum = (backwards ? nwords - i - 1 : i);
int bit_offset = (backwards
? MAX (bitsize - (i + 1) * BITS_PER_WORD, 0)
: i * BITS_PER_WORD);
store_bit_field (op0, MIN (BITS_PER_WORD,
bitsize - i * BITS_PER_WORD),
bitnum + bit_offset, word_mode,
operand_subword_force (value, wordnum,
(GET_MODE (value) == VOIDmode
? fieldmode
: GET_MODE (value))),
align, total_size);
}
return value;
}
/* From here on we can assume that the field to be stored in is
a full-word (whatever type that is), since it is shorter than a word. */
/* OFFSET is the number of words or bytes (UNIT says which)
from STR_RTX to the first word or byte containing part of the field. */
if (GET_CODE (op0) == REG)
{
if (offset != 0
|| GET_MODE_SIZE (GET_MODE (op0)) > UNITS_PER_WORD)
op0 = gen_rtx (SUBREG, TYPE_MODE (type_for_size (BITS_PER_WORD, 0)),
op0, offset);
offset = 0;
}
else
{
op0 = protect_from_queue (op0, 1);
}
/* If VALUE is a floating-point mode, access it as an integer of the
corresponding size. This can occur on a machine with 64 bit registers
that uses SFmode for float. This can also occur for unaligned float
structure fields. */
if (GET_MODE_CLASS (GET_MODE (value)) == MODE_FLOAT)
{
if (GET_CODE (value) != REG)
value = copy_to_reg (value);
value = gen_rtx (SUBREG, word_mode, value, 0);
}
/* Now OFFSET is nonzero only if OP0 is memory
and is therefore always measured in bytes. */
#ifdef HAVE_insv
if (HAVE_insv
&& GET_MODE (value) != BLKmode
&& !(bitsize == 1 && GET_CODE (value) == CONST_INT)
/* Ensure insv's size is wide enough for this field. */
&& (GET_MODE_BITSIZE (insn_operand_mode[(int) CODE_FOR_insv][3])
>= bitsize)
&& ! ((GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG)
&& (bitsize + bitpos
> GET_MODE_BITSIZE (insn_operand_mode[(int) CODE_FOR_insv][3]))))
{
int xbitpos = bitpos;
rtx value1;
rtx xop0 = op0;
rtx last = get_last_insn ();
rtx pat;
enum machine_mode maxmode
= insn_operand_mode[(int) CODE_FOR_insv][3];
int save_volatile_ok = volatile_ok;
volatile_ok = 1;
/* If this machine's insv can only insert into a register, copy OP0
into a register and save it back later. */
/* This used to check flag_force_mem, but that was a serious
de-optimization now that flag_force_mem is enabled by -O2. */
if (GET_CODE (op0) == MEM
&& ! ((*insn_operand_predicate[(int) CODE_FOR_insv][0])
(op0, VOIDmode)))
{
rtx tempreg;
enum machine_mode bestmode;
/* Get the mode to use for inserting into this field. If OP0 is
BLKmode, get the smallest mode consistent with the alignment. If
OP0 is a non-BLKmode object that is no wider than MAXMODE, use its
mode. Otherwise, use the smallest mode containing the field. */
if (GET_MODE (op0) == BLKmode
|| GET_MODE_SIZE (GET_MODE (op0)) > GET_MODE_SIZE (maxmode))
bestmode
= get_best_mode (bitsize, bitnum, align * BITS_PER_UNIT, maxmode,
MEM_VOLATILE_P (op0));
else
bestmode = GET_MODE (op0);
if (bestmode == VOIDmode
|| (SLOW_UNALIGNED_ACCESS && GET_MODE_SIZE (bestmode) > align))
goto insv_loses;
/* Adjust address to point to the containing unit of that mode. */
unit = GET_MODE_BITSIZE (bestmode);
/* Compute offset as multiple of this unit, counting in bytes. */
offset = (bitnum / unit) * GET_MODE_SIZE (bestmode);
bitpos = bitnum % unit;
op0 = change_address (op0, bestmode,
plus_constant (XEXP (op0, 0), offset));
/* Fetch that unit, store the bitfield in it, then store the unit. */
tempreg = copy_to_reg (op0);
store_bit_field (tempreg, bitsize, bitpos, fieldmode, value,
align, total_size);
emit_move_insn (op0, tempreg);
return value;
}
volatile_ok = save_volatile_ok;
/* Add OFFSET into OP0's address. */
if (GET_CODE (xop0) == MEM)
xop0 = change_address (xop0, byte_mode,
plus_constant (XEXP (xop0, 0), offset));
/* If xop0 is a register, we need it in MAXMODE
to make it acceptable to the format of insv. */
if (GET_CODE (xop0) == SUBREG)
/* We can't just change the mode, because this might clobber op0,
and we will need the original value of op0 if insv fails. */
xop0 = gen_rtx (SUBREG, maxmode, SUBREG_REG (xop0), SUBREG_WORD (xop0));
if (GET_CODE (xop0) == REG && GET_MODE (xop0) != maxmode)
xop0 = gen_rtx (SUBREG, maxmode, xop0, 0);
/* On big-endian machines, we count bits from the most significant.
If the bit field insn does not, we must invert. */
if (BITS_BIG_ENDIAN != BYTES_BIG_ENDIAN)
xbitpos = unit - bitsize - xbitpos;
/* We have been counting XBITPOS within UNIT.
Count instead within the size of the register. */
if (BITS_BIG_ENDIAN && GET_CODE (xop0) != MEM)
xbitpos += GET_MODE_BITSIZE (maxmode) - unit;
unit = GET_MODE_BITSIZE (maxmode);
/* Convert VALUE to maxmode (which insv insn wants) in VALUE1. */
value1 = value;
if (GET_MODE (value) != maxmode)
{
if (GET_MODE_BITSIZE (GET_MODE (value)) >= bitsize)
{
/* Optimization: Don't bother really extending VALUE
if it has all the bits we will actually use. However,
if we must narrow it, be sure we do it correctly. */
if (GET_MODE_SIZE (GET_MODE (value)) < GET_MODE_SIZE (maxmode))
{
/* Avoid making subreg of a subreg, or of a mem. */
if (GET_CODE (value1) != REG)
value1 = copy_to_reg (value1);
value1 = gen_rtx (SUBREG, maxmode, value1, 0);
}
else
value1 = gen_lowpart (maxmode, value1);
}
else if (!CONSTANT_P (value))
/* Parse phase is supposed to make VALUE's data type
match that of the component reference, which is a type
at least as wide as the field; so VALUE should have
a mode that corresponds to that type. */
abort ();
}
/* If this machine's insv insists on a register,
get VALUE1 into a register. */
if (! ((*insn_operand_predicate[(int) CODE_FOR_insv][3])
(value1, maxmode)))
value1 = force_reg (maxmode, value1);
pat = gen_insv (xop0, GEN_INT (bitsize), GEN_INT (xbitpos), value1);
if (pat)
emit_insn (pat);
else
{
delete_insns_since (last);
store_fixed_bit_field (op0, offset, bitsize, bitpos, value, align);
}
}
else
insv_loses:
#endif
/* Insv is not available; store using shifts and boolean ops. */
store_fixed_bit_field (op0, offset, bitsize, bitpos, value, align);
return value;
}
/* Use shifts and boolean operations to store VALUE
into a bit field of width BITSIZE
in a memory location specified by OP0 except offset by OFFSET bytes.
(OFFSET must be 0 if OP0 is a register.)
The field starts at position BITPOS within the byte.
(If OP0 is a register, it may be a full word or a narrower mode,
but BITPOS still counts within a full word,
which is significant on bigendian machines.)
STRUCT_ALIGN is the alignment the structure is known to have (in bytes).
Note that protect_from_queue has already been done on OP0 and VALUE. */
static void
store_fixed_bit_field (op0, offset, bitsize, bitpos, value, struct_align)
register rtx op0;
register int offset, bitsize, bitpos;
register rtx value;
int struct_align;
{
register enum machine_mode mode;
int total_bits = BITS_PER_WORD;
rtx subtarget, temp;
int all_zero = 0;
int all_one = 0;
if (! SLOW_UNALIGNED_ACCESS)
struct_align = BIGGEST_ALIGNMENT / BITS_PER_UNIT;
/* There is a case not handled here:
a structure with a known alignment of just a halfword
and a field split across two aligned halfwords within the structure.
Or likewise a structure with a known alignment of just a byte
and a field split across two bytes.
Such cases are not supposed to be able to occur. */
if (GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG)
{
if (offset != 0)
abort ();
/* Special treatment for a bit field split across two registers. */
if (bitsize + bitpos > BITS_PER_WORD)
{
store_split_bit_field (op0, bitsize, bitpos,
value, BITS_PER_WORD);
return;
}
}
else
{
/* Get the proper mode to use for this field. We want a mode that
includes the entire field. If such a mode would be larger than
a word, we won't be doing the extraction the normal way. */
mode = get_best_mode (bitsize, bitpos + offset * BITS_PER_UNIT,
struct_align * BITS_PER_UNIT, word_mode,
GET_CODE (op0) == MEM && MEM_VOLATILE_P (op0));
if (mode == VOIDmode)
{
/* The only way this should occur is if the field spans word
boundaries. */
store_split_bit_field (op0,
bitsize, bitpos + offset * BITS_PER_UNIT,
value, struct_align);
return;
}
total_bits = GET_MODE_BITSIZE (mode);
/* Make sure bitpos is valid for the chosen mode. Adjust BITPOS to
be be in the range 0 to total_bits-1, and put any excess bytes in
OFFSET. */
if (bitpos >= total_bits)
{
offset += (bitpos / total_bits) * (total_bits / BITS_PER_UNIT);
bitpos -= ((bitpos / total_bits) * (total_bits / BITS_PER_UNIT)
* BITS_PER_UNIT);
}
/* Get ref to an aligned byte, halfword, or word containing the field.
Adjust BITPOS to be position within a word,
and OFFSET to be the offset of that word.
Then alter OP0 to refer to that word. */
bitpos += (offset % (total_bits / BITS_PER_UNIT)) * BITS_PER_UNIT;
offset -= (offset % (total_bits / BITS_PER_UNIT));
op0 = change_address (op0, mode,
plus_constant (XEXP (op0, 0), offset));
}
mode = GET_MODE (op0);
/* Now MODE is either some integral mode for a MEM as OP0,
or is a full-word for a REG as OP0. TOTAL_BITS corresponds.
The bit field is contained entirely within OP0.
BITPOS is the starting bit number within OP0.
(OP0's mode may actually be narrower than MODE.) */
if (BYTES_BIG_ENDIAN)
/* BITPOS is the distance between our msb
and that of the containing datum.
Convert it to the distance from the lsb. */
bitpos = total_bits - bitsize - bitpos;
/* Now BITPOS is always the distance between our lsb
and that of OP0. */
/* Shift VALUE left by BITPOS bits. If VALUE is not constant,
we must first convert its mode to MODE. */
if (GET_CODE (value) == CONST_INT)
{
register HOST_WIDE_INT v = INTVAL (value);
if (bitsize < HOST_BITS_PER_WIDE_INT)
v &= ((HOST_WIDE_INT) 1 << bitsize) - 1;
if (v == 0)
all_zero = 1;
else if ((bitsize < HOST_BITS_PER_WIDE_INT
&& v == ((HOST_WIDE_INT) 1 << bitsize) - 1)
|| (bitsize == HOST_BITS_PER_WIDE_INT && v == -1))
all_one = 1;
value = lshift_value (mode, value, bitpos, bitsize);
}
else
{
int must_and = (GET_MODE_BITSIZE (GET_MODE (value)) != bitsize
&& bitpos + bitsize != GET_MODE_BITSIZE (mode));
if (GET_MODE (value) != mode)
{
if ((GET_CODE (value) == REG || GET_CODE (value) == SUBREG)
&& GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (value)))
value = gen_lowpart (mode, value);
else
value = convert_to_mode (mode, value, 1);
}
if (must_and)
value = expand_binop (mode, and_optab, value,
mask_rtx (mode, 0, bitsize, 0),
NULL_RTX, 1, OPTAB_LIB_WIDEN);
if (bitpos > 0)
value = expand_shift (LSHIFT_EXPR, mode, value,
build_int_2 (bitpos, 0), NULL_RTX, 1);
}
/* Now clear the chosen bits in OP0,
except that if VALUE is -1 we need not bother. */
subtarget = (GET_CODE (op0) == REG || ! flag_force_mem) ? op0 : 0;
if (! all_one)
{
temp = expand_binop (mode, and_optab, op0,
mask_rtx (mode, bitpos, bitsize, 1),
subtarget, 1, OPTAB_LIB_WIDEN);
subtarget = temp;
}
else
temp = op0;
/* Now logical-or VALUE into OP0, unless it is zero. */
if (! all_zero)
temp = expand_binop (mode, ior_optab, temp, value,
subtarget, 1, OPTAB_LIB_WIDEN);
if (op0 != temp)
emit_move_insn (op0, temp);
}
/* Store a bit field that is split across multiple accessible memory objects.
OP0 is the REG, SUBREG or MEM rtx for the first of the objects.
BITSIZE is the field width; BITPOS the position of its first bit
(within the word).
VALUE is the value to store.
ALIGN is the known alignment of OP0, measured in bytes.
This is also the size of the memory objects to be used.
This does not yet handle fields wider than BITS_PER_WORD. */
static void
store_split_bit_field (op0, bitsize, bitpos, value, align)
rtx op0;
int bitsize, bitpos;
rtx value;
int align;
{
int unit;
int bitsdone = 0;
/* Make sure UNIT isn't larger than BITS_PER_WORD, we can only handle that
much at a time. */
if (GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG)
unit = BITS_PER_WORD;
else
unit = MIN (align * BITS_PER_UNIT, BITS_PER_WORD);
/* If VALUE is a constant other than a CONST_INT, get it into a register in
WORD_MODE. If we can do this using gen_lowpart_common, do so. Note
that VALUE might be a floating-point constant. */
if (CONSTANT_P (value) && GET_CODE (value) != CONST_INT)
{
rtx word = gen_lowpart_common (word_mode, value);
if (word && (value != word))
value = word;
else
value = gen_lowpart_common (word_mode,
force_reg (GET_MODE (value) != VOIDmode
? GET_MODE (value)
: word_mode, value));
}
while (bitsdone < bitsize)
{
int thissize;
rtx part, word;
int thispos;
int offset;
offset = (bitpos + bitsdone) / unit;
thispos = (bitpos + bitsdone) % unit;
/* THISSIZE must not overrun a word boundary. Otherwise,
store_fixed_bit_field will call us again, and we will mutually
recurse forever. */
thissize = MIN (bitsize - bitsdone, BITS_PER_WORD);
thissize = MIN (thissize, unit - thispos);
if (BYTES_BIG_ENDIAN)
{
int total_bits;
/* We must do an endian conversion exactly the same way as it is
done in extract_bit_field, so that the two calls to
extract_fixed_bit_field will have comparable arguments. */
if (GET_CODE (value) != MEM || GET_MODE (value) == BLKmode)
total_bits = BITS_PER_WORD;
else
total_bits = GET_MODE_BITSIZE (GET_MODE (value));
/* Fetch successively less significant portions. */
if (GET_CODE (value) == CONST_INT)
part = GEN_INT (((unsigned HOST_WIDE_INT) (INTVAL (value))
>> (bitsize - bitsdone - thissize))
& (((HOST_WIDE_INT) 1 << thissize) - 1));
else
/* The args are chosen so that the last part includes the
lsb. Give extract_bit_field the value it needs (with
endianness compensation) to fetch the piece we want.
??? We have no idea what the alignment of VALUE is, so
we have to use a guess. */
part
= extract_fixed_bit_field
(word_mode, value, 0, thissize,
total_bits - bitsize + bitsdone, NULL_RTX, 1,
GET_MODE (value) == VOIDmode
? UNITS_PER_WORD
: (GET_MODE (value) == BLKmode
? 1
: GET_MODE_ALIGNMENT (GET_MODE (value)) / BITS_PER_UNIT));
}
else
{
/* Fetch successively more significant portions. */
if (GET_CODE (value) == CONST_INT)
part = GEN_INT (((unsigned HOST_WIDE_INT) (INTVAL (value))
>> bitsdone)
& (((HOST_WIDE_INT) 1 << thissize) - 1));
else
part
= extract_fixed_bit_field
(word_mode, value, 0, thissize, bitsdone, NULL_RTX, 1,
GET_MODE (value) == VOIDmode
? UNITS_PER_WORD
: (GET_MODE (value) == BLKmode
? 1
: GET_MODE_ALIGNMENT (GET_MODE (value)) / BITS_PER_UNIT));
}
/* If OP0 is a register, then handle OFFSET here.
When handling multiword bitfields, extract_bit_field may pass
down a word_mode SUBREG of a larger REG for a bitfield that actually
crosses a word boundary. Thus, for a SUBREG, we must find
the current word starting from the base register. */
if (GET_CODE (op0) == SUBREG)
{
word = operand_subword_force (SUBREG_REG (op0),
SUBREG_WORD (op0) + offset,
GET_MODE (SUBREG_REG (op0)));
offset = 0;
}
else if (GET_CODE (op0) == REG)
{
word = operand_subword_force (op0, offset, GET_MODE (op0));
offset = 0;
}
else
word = op0;
/* OFFSET is in UNITs, and UNIT is in bits.
store_fixed_bit_field wants offset in bytes. */
store_fixed_bit_field (word, offset * unit / BITS_PER_UNIT,
thissize, thispos, part, align);
bitsdone += thissize;
}
}
/* Generate code to extract a byte-field from STR_RTX
containing BITSIZE bits, starting at BITNUM,
and put it in TARGET if possible (if TARGET is nonzero).
Regardless of TARGET, we return the rtx for where the value is placed.
It may be a QUEUED.
STR_RTX is the structure containing the byte (a REG or MEM).
UNSIGNEDP is nonzero if this is an unsigned bit field.
MODE is the natural mode of the field value once extracted.
TMODE is the mode the caller would like the value to have;
but the value may be returned with type MODE instead.
ALIGN is the alignment that STR_RTX is known to have, measured in bytes.
TOTAL_SIZE is the size in bytes of the containing structure,
or -1 if varying.
If a TARGET is specified and we can store in it at no extra cost,
we do so, and return TARGET.
Otherwise, we return a REG of mode TMODE or MODE, with TMODE preferred
if they are equally easy. */
rtx
extract_bit_field (str_rtx, bitsize, bitnum, unsignedp,
target, mode, tmode, align, total_size)
rtx str_rtx;
register int bitsize;
int bitnum;
int unsignedp;
rtx target;
enum machine_mode mode, tmode;
int align;
int total_size;
{
int unit = (GET_CODE (str_rtx) == MEM) ? BITS_PER_UNIT : BITS_PER_WORD;
register int offset = bitnum / unit;
register int bitpos = bitnum % unit;
register rtx op0 = str_rtx;
rtx spec_target = target;
rtx spec_target_subreg = 0;
/* Discount the part of the structure before the desired byte.
We need to know how many bytes are safe to reference after it. */
if (total_size >= 0)
total_size -= (bitpos / BIGGEST_ALIGNMENT
* (BIGGEST_ALIGNMENT / BITS_PER_UNIT));
if (tmode == VOIDmode)
tmode = mode;
while (GET_CODE (op0) == SUBREG)
{
int outer_size = GET_MODE_BITSIZE (GET_MODE (op0));
int inner_size = GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (op0)));
offset += SUBREG_WORD (op0);
if (BYTES_BIG_ENDIAN && (outer_size < inner_size))
{
bitpos += inner_size - outer_size;
if (bitpos > unit)
{
offset += (bitpos / unit);
bitpos %= unit;
}
}
op0 = SUBREG_REG (op0);
}
/* ??? We currently assume TARGET is at least as big as BITSIZE.
If that's wrong, the solution is to test for it and set TARGET to 0
if needed. */
/* If OP0 is a register, BITPOS must count within a word.
But as we have it, it counts within whatever size OP0 now has.
On a bigendian machine, these are not the same, so convert. */
if (BYTES_BIG_ENDIAN
&& GET_CODE (op0) != MEM
&& unit > GET_MODE_BITSIZE (GET_MODE (op0)))
bitpos += unit - GET_MODE_BITSIZE (GET_MODE (op0));
/* Extracting a full-word or multi-word value
from a structure in a register or aligned memory.
This can be done with just SUBREG.
So too extracting a subword value in
the least significant part of the register. */
if (((GET_CODE (op0) == REG
&& TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (mode),
GET_MODE_BITSIZE (GET_MODE (op0))))
|| (GET_CODE (op0) == MEM
&& (! SLOW_UNALIGNED_ACCESS
|| (offset * BITS_PER_UNIT % bitsize == 0
&& align * BITS_PER_UNIT % bitsize == 0))))
&& ((bitsize >= BITS_PER_WORD && bitsize == GET_MODE_BITSIZE (mode)
&& bitpos % BITS_PER_WORD == 0)
|| (mode_for_size (bitsize, GET_MODE_CLASS (tmode), 0) != BLKmode
&& (BYTES_BIG_ENDIAN
? bitpos + bitsize == BITS_PER_WORD
: bitpos == 0))))
{
enum machine_mode mode1
= mode_for_size (bitsize, GET_MODE_CLASS (tmode), 0);
if (mode1 != GET_MODE (op0))
{
if (GET_CODE (op0) == REG)
op0 = gen_rtx (SUBREG, mode1, op0, offset);
else
op0 = change_address (op0, mode1,
plus_constant (XEXP (op0, 0), offset));
}
if (mode1 != mode)
return convert_to_mode (tmode, op0, unsignedp);
return op0;
}
/* Handle fields bigger than a word. */
if (bitsize > BITS_PER_WORD)
{
/* Here we transfer the words of the field
in the order least significant first.
This is because the most significant word is the one which may
be less than full. */
int nwords = (bitsize + (BITS_PER_WORD - 1)) / BITS_PER_WORD;
int i;
if (target == 0 || GET_CODE (target) != REG)
target = gen_reg_rtx (mode);
/* Indicate for flow that the entire target reg is being set. */
emit_insn (gen_rtx (CLOBBER, VOIDmode, target));
for (i = 0; i < nwords; i++)
{
/* If I is 0, use the low-order word in both field and target;
if I is 1, use the next to lowest word; and so on. */
/* Word number in TARGET to use. */
int wordnum = (WORDS_BIG_ENDIAN
? GET_MODE_SIZE (GET_MODE (target)) / UNITS_PER_WORD - i - 1
: i);
/* Offset from start of field in OP0. */
int bit_offset = (WORDS_BIG_ENDIAN
? MAX (0, bitsize - (i + 1) * BITS_PER_WORD)
: i * BITS_PER_WORD);
rtx target_part = operand_subword (target, wordnum, 1, VOIDmode);
rtx result_part
= extract_bit_field (op0, MIN (BITS_PER_WORD,
bitsize - i * BITS_PER_WORD),
bitnum + bit_offset,
1, target_part, mode, word_mode,
align, total_size);
if (target_part == 0)
abort ();
if (result_part != target_part)
emit_move_insn (target_part, result_part);
}
if (unsignedp)
{
/* Unless we've filled TARGET, the upper regs in a multi-reg value
need to be zero'd out. */
if (GET_MODE_SIZE (GET_MODE (target)) > nwords * UNITS_PER_WORD)
{
int i,total_words;
total_words = GET_MODE_SIZE (GET_MODE (target)) / UNITS_PER_WORD;
for (i = nwords; i < total_words; i++)
{
int wordnum = WORDS_BIG_ENDIAN ? total_words - i - 1 : i;
rtx target_part = operand_subword (target, wordnum, 1, VOIDmode);
emit_move_insn (target_part, const0_rtx);
}
}
return target;
}
/* Signed bit field: sign-extend with two arithmetic shifts. */
target = expand_shift (LSHIFT_EXPR, mode, target,
build_int_2 (GET_MODE_BITSIZE (mode) - bitsize, 0),
NULL_RTX, 0);
return expand_shift (RSHIFT_EXPR, mode, target,
build_int_2 (GET_MODE_BITSIZE (mode) - bitsize, 0),
NULL_RTX, 0);
}
/* From here on we know the desired field is smaller than a word
so we can assume it is an integer. So we can safely extract it as one
size of integer, if necessary, and then truncate or extend
to the size that is wanted. */
/* OFFSET is the number of words or bytes (UNIT says which)
from STR_RTX to the first word or byte containing part of the field. */
if (GET_CODE (op0) == REG)
{
if (offset != 0
|| GET_MODE_SIZE (GET_MODE (op0)) > UNITS_PER_WORD)
op0 = gen_rtx (SUBREG, TYPE_MODE (type_for_size (BITS_PER_WORD, 0)),
op0, offset);
offset = 0;
}
else
{
op0 = protect_from_queue (str_rtx, 1);
}
/* Now OFFSET is nonzero only for memory operands. */
if (unsignedp)
{
#ifdef HAVE_extzv
if (HAVE_extzv
&& (GET_MODE_BITSIZE (insn_operand_mode[(int) CODE_FOR_extzv][0])
>= bitsize)
&& ! ((GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG)
&& (bitsize + bitpos
> GET_MODE_BITSIZE (insn_operand_mode[(int) CODE_FOR_extzv][0]))))
{
int xbitpos = bitpos, xoffset = offset;
rtx bitsize_rtx, bitpos_rtx;
rtx last = get_last_insn();
rtx xop0 = op0;
rtx xtarget = target;
rtx xspec_target = spec_target;
rtx xspec_target_subreg = spec_target_subreg;
rtx pat;
enum machine_mode maxmode
= insn_operand_mode[(int) CODE_FOR_extzv][0];
if (GET_CODE (xop0) == MEM)
{
int save_volatile_ok = volatile_ok;
volatile_ok = 1;
/* Is the memory operand acceptable? */
if (flag_force_mem
|| ! ((*insn_operand_predicate[(int) CODE_FOR_extzv][1])
(xop0, GET_MODE (xop0))))
{
/* No, load into a reg and extract from there. */
enum machine_mode bestmode;
/* Get the mode to use for inserting into this field. If
OP0 is BLKmode, get the smallest mode consistent with the
alignment. If OP0 is a non-BLKmode object that is no
wider than MAXMODE, use its mode. Otherwise, use the
smallest mode containing the field. */
if (GET_MODE (xop0) == BLKmode
|| (GET_MODE_SIZE (GET_MODE (op0))
> GET_MODE_SIZE (maxmode)))
bestmode = get_best_mode (bitsize, bitnum,
align * BITS_PER_UNIT, maxmode,
MEM_VOLATILE_P (xop0));
else
bestmode = GET_MODE (xop0);
if (bestmode == VOIDmode
|| (SLOW_UNALIGNED_ACCESS && GET_MODE_SIZE (bestmode) > align))
goto extzv_loses;
/* Compute offset as multiple of this unit,
counting in bytes. */
unit = GET_MODE_BITSIZE (bestmode);
xoffset = (bitnum / unit) * GET_MODE_SIZE (bestmode);
xbitpos = bitnum % unit;
xop0 = change_address (xop0, bestmode,
plus_constant (XEXP (xop0, 0),
xoffset));
/* Fetch it to a register in that size. */
xop0 = force_reg (bestmode, xop0);
/* XBITPOS counts within UNIT, which is what is expected. */
}
else
/* Get ref to first byte containing part of the field. */
xop0 = change_address (xop0, byte_mode,
plus_constant (XEXP (xop0, 0), xoffset));
volatile_ok = save_volatile_ok;
}
/* If op0 is a register, we need it in MAXMODE (which is usually
SImode). to make it acceptable to the format of extzv. */
if (GET_CODE (xop0) == SUBREG && GET_MODE (xop0) != maxmode)
abort ();
if (GET_CODE (xop0) == REG && GET_MODE (xop0) != maxmode)
xop0 = gen_rtx (SUBREG, maxmode, xop0, 0);
/* On big-endian machines, we count bits from the most significant.
If the bit field insn does not, we must invert. */
if (BITS_BIG_ENDIAN != BYTES_BIG_ENDIAN)
xbitpos = unit - bitsize - xbitpos;
/* Now convert from counting within UNIT to counting in MAXMODE. */
if (BITS_BIG_ENDIAN && GET_CODE (xop0) != MEM)
xbitpos += GET_MODE_BITSIZE (maxmode) - unit;
unit = GET_MODE_BITSIZE (maxmode);
if (xtarget == 0
|| (flag_force_mem && GET_CODE (xtarget) == MEM))
xtarget = xspec_target = gen_reg_rtx (tmode);
if (GET_MODE (xtarget) != maxmode)
{
if (GET_CODE (xtarget) == REG)
{
int wider = (GET_MODE_SIZE (maxmode)
> GET_MODE_SIZE (GET_MODE (xtarget)));
xtarget = gen_lowpart (maxmode, xtarget);
if (wider)
xspec_target_subreg = xtarget;
}
else
xtarget = gen_reg_rtx (maxmode);
}
/* If this machine's extzv insists on a register target,
make sure we have one. */
if (! ((*insn_operand_predicate[(int) CODE_FOR_extzv][0])
(xtarget, maxmode)))
xtarget = gen_reg_rtx (maxmode);
bitsize_rtx = GEN_INT (bitsize);
bitpos_rtx = GEN_INT (xbitpos);
pat = gen_extzv (protect_from_queue (xtarget, 1),
xop0, bitsize_rtx, bitpos_rtx);
if (pat)
{
emit_insn (pat);
target = xtarget;
spec_target = xspec_target;
spec_target_subreg = xspec_target_subreg;
}
else
{
delete_insns_since (last);
target = extract_fixed_bit_field (tmode, op0, offset, bitsize,
bitpos, target, 1, align);
}
}
else
extzv_loses:
#endif
target = extract_fixed_bit_field (tmode, op0, offset, bitsize, bitpos,
target, 1, align);
}
else
{
#ifdef HAVE_extv
if (HAVE_extv
&& (GET_MODE_BITSIZE (insn_operand_mode[(int) CODE_FOR_extv][0])
>= bitsize)
&& ! ((GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG)
&& (bitsize + bitpos
> GET_MODE_BITSIZE (insn_operand_mode[(int) CODE_FOR_extv][0]))))
{
int xbitpos = bitpos, xoffset = offset;
rtx bitsize_rtx, bitpos_rtx;
rtx last = get_last_insn();
rtx xop0 = op0, xtarget = target;
rtx xspec_target = spec_target;
rtx xspec_target_subreg = spec_target_subreg;
rtx pat;
enum machine_mode maxmode
= insn_operand_mode[(int) CODE_FOR_extv][0];
if (GET_CODE (xop0) == MEM)
{
/* Is the memory operand acceptable? */
if (! ((*insn_operand_predicate[(int) CODE_FOR_extv][1])
(xop0, GET_MODE (xop0))))
{
/* No, load into a reg and extract from there. */
enum machine_mode bestmode;
/* Get the mode to use for inserting into this field. If
OP0 is BLKmode, get the smallest mode consistent with the
alignment. If OP0 is a non-BLKmode object that is no
wider than MAXMODE, use its mode. Otherwise, use the
smallest mode containing the field. */
if (GET_MODE (xop0) == BLKmode
|| (GET_MODE_SIZE (GET_MODE (op0))
> GET_MODE_SIZE (maxmode)))
bestmode = get_best_mode (bitsize, bitnum,
align * BITS_PER_UNIT, maxmode,
MEM_VOLATILE_P (xop0));
else
bestmode = GET_MODE (xop0);
if (bestmode == VOIDmode
|| (SLOW_UNALIGNED_ACCESS && GET_MODE_SIZE (bestmode) > align))
goto extv_loses;
/* Compute offset as multiple of this unit,
counting in bytes. */
unit = GET_MODE_BITSIZE (bestmode);
xoffset = (bitnum / unit) * GET_MODE_SIZE (bestmode);
xbitpos = bitnum % unit;
xop0 = change_address (xop0, bestmode,
plus_constant (XEXP (xop0, 0),
xoffset));
/* Fetch it to a register in that size. */
xop0 = force_reg (bestmode, xop0);
/* XBITPOS counts within UNIT, which is what is expected. */
}
else
/* Get ref to first byte containing part of the field. */
xop0 = change_address (xop0, byte_mode,
plus_constant (XEXP (xop0, 0), xoffset));
}
/* If op0 is a register, we need it in MAXMODE (which is usually
SImode) to make it acceptable to the format of extv. */
if (GET_CODE (xop0) == SUBREG && GET_MODE (xop0) != maxmode)
abort ();
if (GET_CODE (xop0) == REG && GET_MODE (xop0) != maxmode)
xop0 = gen_rtx (SUBREG, maxmode, xop0, 0);
/* On big-endian machines, we count bits from the most significant.
If the bit field insn does not, we must invert. */
if (BITS_BIG_ENDIAN != BYTES_BIG_ENDIAN)
xbitpos = unit - bitsize - xbitpos;
/* XBITPOS counts within a size of UNIT.
Adjust to count within a size of MAXMODE. */
if (BITS_BIG_ENDIAN && GET_CODE (xop0) != MEM)
xbitpos += (GET_MODE_BITSIZE (maxmode) - unit);
unit = GET_MODE_BITSIZE (maxmode);
if (xtarget == 0
|| (flag_force_mem && GET_CODE (xtarget) == MEM))
xtarget = xspec_target = gen_reg_rtx (tmode);
if (GET_MODE (xtarget) != maxmode)
{
if (GET_CODE (xtarget) == REG)
{
int wider = (GET_MODE_SIZE (maxmode)
> GET_MODE_SIZE (GET_MODE (xtarget)));
xtarget = gen_lowpart (maxmode, xtarget);
if (wider)
xspec_target_subreg = xtarget;
}
else
xtarget = gen_reg_rtx (maxmode);
}
/* If this machine's extv insists on a register target,
make sure we have one. */
if (! ((*insn_operand_predicate[(int) CODE_FOR_extv][0])
(xtarget, maxmode)))
xtarget = gen_reg_rtx (maxmode);
bitsize_rtx = GEN_INT (bitsize);
bitpos_rtx = GEN_INT (xbitpos);
pat = gen_extv (protect_from_queue (xtarget, 1),
xop0, bitsize_rtx, bitpos_rtx);
if (pat)
{
emit_insn (pat);
target = xtarget;
spec_target = xspec_target;
spec_target_subreg = xspec_target_subreg;
}
else
{
delete_insns_since (last);
target = extract_fixed_bit_field (tmode, op0, offset, bitsize,
bitpos, target, 0, align);
}
}
else
extv_loses:
#endif
target = extract_fixed_bit_field (tmode, op0, offset, bitsize, bitpos,
target, 0, align);
}
if (target == spec_target)
return target;
if (target == spec_target_subreg)
return spec_target;
if (GET_MODE (target) != tmode && GET_MODE (target) != mode)
{
/* If the target mode is floating-point, first convert to the
integer mode of that size and then access it as a floating-point
value via a SUBREG. */
if (GET_MODE_CLASS (tmode) == MODE_FLOAT)
{
target = convert_to_mode (mode_for_size (GET_MODE_BITSIZE (tmode),
MODE_INT, 0),
target, unsignedp);
if (GET_CODE (target) != REG)
target = copy_to_reg (target);
return gen_rtx (SUBREG, tmode, target, 0);
}
else
return convert_to_mode (tmode, target, unsignedp);
}
return target;
}
/* Extract a bit field using shifts and boolean operations
Returns an rtx to represent the value.
OP0 addresses a register (word) or memory (byte).
BITPOS says which bit within the word or byte the bit field starts in.
OFFSET says how many bytes farther the bit field starts;
it is 0 if OP0 is a register.
BITSIZE says how many bits long the bit field is.
(If OP0 is a register, it may be narrower than a full word,
but BITPOS still counts within a full word,
which is significant on bigendian machines.)
UNSIGNEDP is nonzero for an unsigned bit field (don't sign-extend value).
If TARGET is nonzero, attempts to store the value there
and return TARGET, but this is not guaranteed.
If TARGET is not used, create a pseudo-reg of mode TMODE for the value.
ALIGN is the alignment that STR_RTX is known to have, measured in bytes. */
static rtx
extract_fixed_bit_field (tmode, op0, offset, bitsize, bitpos,
target, unsignedp, align)
enum machine_mode tmode;
register rtx op0, target;
register int offset, bitsize, bitpos;
int unsignedp;
int align;
{
int total_bits = BITS_PER_WORD;
enum machine_mode mode;
if (GET_CODE (op0) == SUBREG || GET_CODE (op0) == REG)
{
/* Special treatment for a bit field split across two registers. */
if (bitsize + bitpos > BITS_PER_WORD)
return extract_split_bit_field (op0, bitsize, bitpos,
unsignedp, align);
}
else
{
/* Get the proper mode to use for this field. We want a mode that
includes the entire field. If such a mode would be larger than
a word, we won't be doing the extraction the normal way. */
mode = get_best_mode (bitsize, bitpos + offset * BITS_PER_UNIT,
align * BITS_PER_UNIT, word_mode,
GET_CODE (op0) == MEM && MEM_VOLATILE_P (op0));
if (mode == VOIDmode)
/* The only way this should occur is if the field spans word
boundaries. */
return extract_split_bit_field (op0, bitsize,
bitpos + offset * BITS_PER_UNIT,
unsignedp, align);
total_bits = GET_MODE_BITSIZE (mode);
/* Make sure bitpos is valid for the chosen mode. Adjust BITPOS to
be be in the range 0 to total_bits-1, and put any excess bytes in
OFFSET. */
if (bitpos >= total_bits)
{
offset += (bitpos / total_bits) * (total_bits / BITS_PER_UNIT);
bitpos -= ((bitpos / total_bits) * (total_bits / BITS_PER_UNIT)
* BITS_PER_UNIT);
}
/* Get ref to an aligned byte, halfword, or word containing the field.
Adjust BITPOS to be position within a word,
and OFFSET to be the offset of that word.
Then alter OP0 to refer to that word. */
bitpos += (offset % (total_bits / BITS_PER_UNIT)) * BITS_PER_UNIT;
offset -= (offset % (total_bits / BITS_PER_UNIT));
op0 = change_address (op0, mode,
plus_constant (XEXP (op0, 0), offset));
}
mode = GET_MODE (op0);
if (BYTES_BIG_ENDIAN)
{
/* BITPOS is the distance between our msb and that of OP0.
Convert it to the distance from the lsb. */
bitpos = total_bits - bitsize - bitpos;
}
/* Now BITPOS is always the distance between the field's lsb and that of OP0.
We have reduced the big-endian case to the little-endian case. */
if (unsignedp)
{
if (bitpos)
{
/* If the field does not already start at the lsb,
shift it so it does. */
tree amount = build_int_2 (bitpos, 0);
/* Maybe propagate the target for the shift. */
/* But not if we will return it--could confuse integrate.c. */
rtx subtarget = (target != 0 && GET_CODE (target) == REG
&& !REG_FUNCTION_VALUE_P (target)
? target : 0);
if (tmode != mode) subtarget = 0;
op0 = expand_shift (RSHIFT_EXPR, mode, op0, amount, subtarget, 1);
}
/* Convert the value to the desired mode. */
if (mode != tmode)
op0 = convert_to_mode (tmode, op0, 1);
/* Unless the msb of the field used to be the msb when we shifted,
mask out the upper bits. */
if (GET_MODE_BITSIZE (mode) != bitpos + bitsize
#if 0
#ifdef SLOW_ZERO_EXTEND
/* Always generate an `and' if
we just zero-extended op0 and SLOW_ZERO_EXTEND, since it
will combine fruitfully with the zero-extend. */
|| tmode != mode
#endif
#endif
)
return expand_binop (GET_MODE (op0), and_optab, op0,
mask_rtx (GET_MODE (op0), 0, bitsize, 0),
target, 1, OPTAB_LIB_WIDEN);
return op0;
}
/* To extract a signed bit-field, first shift its msb to the msb of the word,
then arithmetic-shift its lsb to the lsb of the word. */
op0 = force_reg (mode, op0);
if (mode != tmode)
target = 0;
/* Find the narrowest integer mode that contains the field. */
for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT); mode != VOIDmode;
mode = GET_MODE_WIDER_MODE (mode))
if (GET_MODE_BITSIZE (mode) >= bitsize + bitpos)
{
op0 = convert_to_mode (mode, op0, 0);
break;
}
if (GET_MODE_BITSIZE (mode) != (bitsize + bitpos))
{
tree amount = build_int_2 (GET_MODE_BITSIZE (mode) - (bitsize + bitpos), 0);
/* Maybe propagate the target for the shift. */
/* But not if we will return the result--could confuse integrate.c. */
rtx subtarget = (target != 0 && GET_CODE (target) == REG
&& ! REG_FUNCTION_VALUE_P (target)
? target : 0);
op0 = expand_shift (LSHIFT_EXPR, mode, op0, amount, subtarget, 1);
}
return expand_shift (RSHIFT_EXPR, mode, op0,
build_int_2 (GET_MODE_BITSIZE (mode) - bitsize, 0),
target, 0);
}
/* Return a constant integer (CONST_INT or CONST_DOUBLE) mask value
of mode MODE with BITSIZE ones followed by BITPOS zeros, or the
complement of that if COMPLEMENT. The mask is truncated if
necessary to the width of mode MODE. The mask is zero-extended if
BITSIZE+BITPOS is too small for MODE. */
static rtx
mask_rtx (mode, bitpos, bitsize, complement)
enum machine_mode mode;
int bitpos, bitsize, complement;
{
HOST_WIDE_INT masklow, maskhigh;
if (bitpos < HOST_BITS_PER_WIDE_INT)
masklow = (HOST_WIDE_INT) -1 << bitpos;
else
masklow = 0;
if (bitpos + bitsize < HOST_BITS_PER_WIDE_INT)
masklow &= ((unsigned HOST_WIDE_INT) -1
>> (HOST_BITS_PER_WIDE_INT - bitpos - bitsize));
if (bitpos <= HOST_BITS_PER_WIDE_INT)
maskhigh = -1;
else
maskhigh = (HOST_WIDE_INT) -1 << (bitpos - HOST_BITS_PER_WIDE_INT);
if (bitpos + bitsize > HOST_BITS_PER_WIDE_INT)
maskhigh &= ((unsigned HOST_WIDE_INT) -1
>> (2 * HOST_BITS_PER_WIDE_INT - bitpos - bitsize));
else
maskhigh = 0;
if (complement)
{
maskhigh = ~maskhigh;
masklow = ~masklow;
}
return immed_double_const (masklow, maskhigh, mode);
}
/* Return a constant integer (CONST_INT or CONST_DOUBLE) rtx with the value
VALUE truncated to BITSIZE bits and then shifted left BITPOS bits. */
static rtx
lshift_value (mode, value, bitpos, bitsize)
enum machine_mode mode;
rtx value;
int bitpos, bitsize;
{
unsigned HOST_WIDE_INT v = INTVAL (value);
HOST_WIDE_INT low, high;
if (bitsize < HOST_BITS_PER_WIDE_INT)
v &= ~((HOST_WIDE_INT) -1 << bitsize);
if (bitpos < HOST_BITS_PER_WIDE_INT)
{
low = v << bitpos;
high = (bitpos > 0 ? (v >> (HOST_BITS_PER_WIDE_INT - bitpos)) : 0);
}
else
{
low = 0;
high = v << (bitpos - HOST_BITS_PER_WIDE_INT);
}
return immed_double_const (low, high, mode);
}
/* Extract a bit field that is split across two words
and return an RTX for the result.
OP0 is the REG, SUBREG or MEM rtx for the first of the two words.
BITSIZE is the field width; BITPOS, position of its first bit, in the word.
UNSIGNEDP is 1 if should zero-extend the contents; else sign-extend.
ALIGN is the known alignment of OP0, measured in bytes.
This is also the size of the memory objects to be used. */
static rtx
extract_split_bit_field (op0, bitsize, bitpos, unsignedp, align)
rtx op0;
int bitsize, bitpos, unsignedp, align;
{
int unit;
int bitsdone = 0;
rtx result;
int first = 1;
/* Make sure UNIT isn't larger than BITS_PER_WORD, we can only handle that
much at a time. */
if (GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG)
unit = BITS_PER_WORD;
else
unit = MIN (align * BITS_PER_UNIT, BITS_PER_WORD);
while (bitsdone < bitsize)
{
int thissize;
rtx part, word;
int thispos;
int offset;
offset = (bitpos + bitsdone) / unit;
thispos = (bitpos + bitsdone) % unit;
/* THISSIZE must not overrun a word boundary. Otherwise,
extract_fixed_bit_field will call us again, and we will mutually
recurse forever. */
thissize = MIN (bitsize - bitsdone, BITS_PER_WORD);
thissize = MIN (thissize, unit - thispos);
/* If OP0 is a register, then handle OFFSET here.
When handling multiword bitfields, extract_bit_field may pass
down a word_mode SUBREG of a larger REG for a bitfield that actually
crosses a word boundary. Thus, for a SUBREG, we must find
the current word starting from the base register. */
if (GET_CODE (op0) == SUBREG)
{
word = operand_subword_force (SUBREG_REG (op0),
SUBREG_WORD (op0) + offset,
GET_MODE (SUBREG_REG (op0)));
offset = 0;
}
else if (GET_CODE (op0) == REG)
{
word = operand_subword_force (op0, offset, GET_MODE (op0));
offset = 0;
}
else
word = op0;
/* Extract the parts in bit-counting order,
whose meaning is determined by BYTES_PER_UNIT.
OFFSET is in UNITs, and UNIT is in bits.
extract_fixed_bit_field wants offset in bytes. */
part = extract_fixed_bit_field (word_mode, word,
offset * unit / BITS_PER_UNIT,
thissize, thispos, 0, 1, align);
bitsdone += thissize;
/* Shift this part into place for the result. */
if (BYTES_BIG_ENDIAN)
{
if (bitsize != bitsdone)
part = expand_shift (LSHIFT_EXPR, word_mode, part,
build_int_2 (bitsize - bitsdone, 0), 0, 1);
}
else
{
if (bitsdone != thissize)
part = expand_shift (LSHIFT_EXPR, word_mode, part,
build_int_2 (bitsdone - thissize, 0), 0, 1);
}
if (first)
result = part;
else
/* Combine the parts with bitwise or. This works
because we extracted each part as an unsigned bit field. */
result = expand_binop (word_mode, ior_optab, part, result, NULL_RTX, 1,
OPTAB_LIB_WIDEN);
first = 0;
}
/* Unsigned bit field: we are done. */
if (unsignedp)
return result;
/* Signed bit field: sign-extend with two arithmetic shifts. */
result = expand_shift (LSHIFT_EXPR, word_mode, result,
build_int_2 (BITS_PER_WORD - bitsize, 0),
NULL_RTX, 0);
return expand_shift (RSHIFT_EXPR, word_mode, result,
build_int_2 (BITS_PER_WORD - bitsize, 0), NULL_RTX, 0);
}
/* Add INC into TARGET. */
void
expand_inc (target, inc)
rtx target, inc;
{
rtx value = expand_binop (GET_MODE (target), add_optab,
target, inc,
target, 0, OPTAB_LIB_WIDEN);
if (value != target)
emit_move_insn (target, value);
}
/* Subtract DEC from TARGET. */
void
expand_dec (target, dec)
rtx target, dec;
{
rtx value = expand_binop (GET_MODE (target), sub_optab,
target, dec,
target, 0, OPTAB_LIB_WIDEN);
if (value != target)
emit_move_insn (target, value);
}
/* Output a shift instruction for expression code CODE,
with SHIFTED being the rtx for the value to shift,
and AMOUNT the tree for the amount to shift by.
Store the result in the rtx TARGET, if that is convenient.
If UNSIGNEDP is nonzero, do a logical shift; otherwise, arithmetic.
Return the rtx for where the value is. */
rtx
expand_shift (code, mode, shifted, amount, target, unsignedp)
enum tree_code code;
register enum machine_mode mode;
rtx shifted;
tree amount;
register rtx target;
int unsignedp;
{
register rtx op1, temp = 0;
register int left = (code == LSHIFT_EXPR || code == LROTATE_EXPR);
register int rotate = (code == LROTATE_EXPR || code == RROTATE_EXPR);
int try;
/* Previously detected shift-counts computed by NEGATE_EXPR
and shifted in the other direction; but that does not work
on all machines. */
op1 = expand_expr (amount, NULL_RTX, VOIDmode, 0);
#ifdef SHIFT_COUNT_TRUNCATED
if (SHIFT_COUNT_TRUNCATED
&& GET_CODE (op1) == CONST_INT
&& (unsigned HOST_WIDE_INT) INTVAL (op1) >= GET_MODE_BITSIZE (mode))
op1 = GEN_INT ((unsigned HOST_WIDE_INT) INTVAL (op1)
% GET_MODE_BITSIZE (mode));
#endif
if (op1 == const0_rtx)
return shifted;
for (try = 0; temp == 0 && try < 3; try++)
{
enum optab_methods methods;
if (try == 0)
methods = OPTAB_DIRECT;
else if (try == 1)
methods = OPTAB_WIDEN;
else
methods = OPTAB_LIB_WIDEN;
if (rotate)
{
/* Widening does not work for rotation. */
if (methods == OPTAB_WIDEN)
continue;
else if (methods == OPTAB_LIB_WIDEN)
{
/* If we have been unable to open-code this by a rotation,
do it as the IOR of two shifts. I.e., to rotate A
by N bits, compute (A << N) | ((unsigned) A >> (C - N))
where C is the bitsize of A.
It is theoretically possible that the target machine might
not be able to perform either shift and hence we would
be making two libcalls rather than just the one for the
shift (similarly if IOR could not be done). We will allow
this extremely unlikely lossage to avoid complicating the
code below. */
rtx subtarget = target == shifted ? 0 : target;
rtx temp1;
tree type = TREE_TYPE (amount);
tree new_amount = make_tree (type, op1);
tree other_amount
= fold (build (MINUS_EXPR, type,
convert (type,
build_int_2 (GET_MODE_BITSIZE (mode),
0)),
amount));
shifted = force_reg (mode, shifted);
temp = expand_shift (left ? LSHIFT_EXPR : RSHIFT_EXPR,
mode, shifted, new_amount, subtarget, 1);
temp1 = expand_shift (left ? RSHIFT_EXPR : LSHIFT_EXPR,
mode, shifted, other_amount, 0, 1);
return expand_binop (mode, ior_optab, temp, temp1, target,
unsignedp, methods);
}
temp = expand_binop (mode,
left ? rotl_optab : rotr_optab,
shifted, op1, target, unsignedp, methods);
/* If we don't have the rotate, but we are rotating by a constant
that is in range, try a rotate in the opposite direction. */
if (temp == 0 && GET_CODE (op1) == CONST_INT
&& INTVAL (op1) > 0 && INTVAL (op1) < GET_MODE_BITSIZE (mode))
temp = expand_binop (mode,
left ? rotr_optab : rotl_optab,
shifted,
GEN_INT (GET_MODE_BITSIZE (mode)
- INTVAL (op1)),
target, unsignedp, methods);
}
else if (unsignedp)
temp = expand_binop (mode,
left ? ashl_optab : lshr_optab,
shifted, op1, target, unsignedp, methods);
/* Do arithmetic shifts.
Also, if we are going to widen the operand, we can just as well
use an arithmetic right-shift instead of a logical one. */
if (temp == 0 && ! rotate
&& (! unsignedp || (! left && methods == OPTAB_WIDEN)))
{
enum optab_methods methods1 = methods;
/* If trying to widen a log shift to an arithmetic shift,
don't accept an arithmetic shift of the same size. */
if (unsignedp)
methods1 = OPTAB_MUST_WIDEN;
/* Arithmetic shift */
temp = expand_binop (mode,
left ? ashl_optab : ashr_optab,
shifted, op1, target, unsignedp, methods1);
}
/* We used to try extzv here for logical right shifts, but that was
only useful for one machine, the VAX, and caused poor code
generation there for lshrdi3, so the code was deleted and a
define_expand for lshrsi3 was added to vax.md. */
}
if (temp == 0)
abort ();
return temp;
}
enum alg_code { alg_zero, alg_m, alg_shift,
alg_add_t_m2, alg_sub_t_m2,
alg_add_factor, alg_sub_factor,
alg_add_t2_m, alg_sub_t2_m,
alg_add, alg_subtract, alg_factor, alg_shiftop };
/* This structure records a sequence of operations.
`ops' is the number of operations recorded.
`cost' is their total cost.
The operations are stored in `op' and the corresponding
logarithms of the integer coefficients in `log'.
These are the operations:
alg_zero total := 0;
alg_m total := multiplicand;
alg_shift total := total * coeff
alg_add_t_m2 total := total + multiplicand * coeff;
alg_sub_t_m2 total := total - multiplicand * coeff;
alg_add_factor total := total * coeff + total;
alg_sub_factor total := total * coeff - total;
alg_add_t2_m total := total * coeff + multiplicand;
alg_sub_t2_m total := total * coeff - multiplicand;
The first operand must be either alg_zero or alg_m. */
struct algorithm
{
short cost;
short ops;
/* The size of the OP and LOG fields are not directly related to the
word size, but the worst-case algorithms will be if we have few
consecutive ones or zeros, i.e., a multiplicand like 10101010101...
In that case we will generate shift-by-2, add, shift-by-2, add,...,
in total wordsize operations. */
enum alg_code op[MAX_BITS_PER_WORD];
char log[MAX_BITS_PER_WORD];
};
/* Compute and return the best algorithm for multiplying by T.
The algorithm must cost less than cost_limit
If retval.cost >= COST_LIMIT, no algorithm was found and all
other field of the returned struct are undefined. */
static void
synth_mult (alg_out, t, cost_limit)
struct algorithm *alg_out;
unsigned HOST_WIDE_INT t;
int cost_limit;
{
int m;
struct algorithm *alg_in, *best_alg;
unsigned int cost;
unsigned HOST_WIDE_INT q;
/* Indicate that no algorithm is yet found. If no algorithm
is found, this value will be returned and indicate failure. */
alg_out->cost = cost_limit;
if (cost_limit <= 0)
return;
/* t == 1 can be done in zero cost. */
if (t == 1)
{
alg_out->ops = 1;
alg_out->cost = 0;
alg_out->op[0] = alg_m;
return;
}
/* t == 0 sometimes has a cost. If it does and it exceeds our limit,
fail now. */
if (t == 0)
{
if (zero_cost >= cost_limit)
return;
else
{
alg_out->ops = 1;
alg_out->cost = zero_cost;
alg_out->op[0] = alg_zero;
return;
}
}
/* We'll be needing a couple extra algorithm structures now. */
alg_in = (struct algorithm *)alloca (sizeof (struct algorithm));
best_alg = (struct algorithm *)alloca (sizeof (struct algorithm));
/* If we have a group of zero bits at the low-order part of T, try
multiplying by the remaining bits and then doing a shift. */
if ((t & 1) == 0)
{
m = floor_log2 (t & -t); /* m = number of low zero bits */
q = t >> m;
cost = shift_cost[m];
synth_mult (alg_in, q, cost_limit - cost);
cost += alg_in->cost;
if (cost < cost_limit)
{
struct algorithm *x;
x = alg_in, alg_in = best_alg, best_alg = x;
best_alg->log[best_alg->ops] = m;
best_alg->op[best_alg->ops] = alg_shift;
cost_limit = cost;
}
}
/* If we have an odd number, add or subtract one. */
if ((t & 1) != 0)
{
unsigned HOST_WIDE_INT w;
for (w = 1; (w & t) != 0; w <<= 1)
;
if (w > 2
/* Reject the case where t is 3.
Thus we prefer addition in that case. */
&& t != 3)
{
/* T ends with ...111. Multiply by (T + 1) and subtract 1. */
cost = add_cost;
synth_mult (alg_in, t + 1, cost_limit - cost);
cost += alg_in->cost;
if (cost < cost_limit)
{
struct algorithm *x;
x = alg_in, alg_in = best_alg, best_alg = x;
best_alg->log[best_alg->ops] = 0;
best_alg->op[best_alg->ops] = alg_sub_t_m2;
cost_limit = cost;
}
}
else
{
/* T ends with ...01 or ...011. Multiply by (T - 1) and add 1. */
cost = add_cost;
synth_mult (alg_in, t - 1, cost_limit - cost);
cost += alg_in->cost;
if (cost < cost_limit)
{
struct algorithm *x;
x = alg_in, alg_in = best_alg, best_alg = x;
best_alg->log[best_alg->ops] = 0;
best_alg->op[best_alg->ops] = alg_add_t_m2;
cost_limit = cost;
}
}
}
/* Look for factors of t of the form
t = q(2**m +- 1), 2 <= m <= floor(log2(t - 1)).
If we find such a factor, we can multiply by t using an algorithm that
multiplies by q, shift the result by m and add/subtract it to itself.
We search for large factors first and loop down, even if large factors
are less probable than small; if we find a large factor we will find a
good sequence quickly, and therefore be able to prune (by decreasing
COST_LIMIT) the search. */
for (m = floor_log2 (t - 1); m >= 2; m--)
{
unsigned HOST_WIDE_INT d;
d = ((unsigned HOST_WIDE_INT) 1 << m) + 1;
if (t % d == 0 && t > d)
{
cost = MIN (shiftadd_cost[m], add_cost + shift_cost[m]);
synth_mult (alg_in, t / d, cost_limit - cost);
cost += alg_in->cost;
if (cost < cost_limit)
{
struct algorithm *x;
x = alg_in, alg_in = best_alg, best_alg = x;
best_alg->log[best_alg->ops] = m;
best_alg->op[best_alg->ops] = alg_add_factor;
cost_limit = cost;
}
/* Other factors will have been taken care of in the recursion. */
break;
}
d = ((unsigned HOST_WIDE_INT) 1 << m) - 1;
if (t % d == 0 && t > d)
{
cost = MIN (shiftsub_cost[m], add_cost + shift_cost[m]);
synth_mult (alg_in, t / d, cost_limit - cost);
cost += alg_in->cost;
if (cost < cost_limit)
{
struct algorithm *x;
x = alg_in, alg_in = best_alg, best_alg = x;
best_alg->log[best_alg->ops] = m;
best_alg->op[best_alg->ops] = alg_sub_factor;
cost_limit = cost;
}
break;
}
}
/* Try shift-and-add (load effective address) instructions,
i.e. do a*3, a*5, a*9. */
if ((t & 1) != 0)
{
q = t - 1;
q = q & -q;
m = exact_log2 (q);
if (m >= 0)
{
cost = shiftadd_cost[m];
synth_mult (alg_in, (t - 1) >> m, cost_limit - cost);
cost += alg_in->cost;
if (cost < cost_limit)
{
struct algorithm *x;
x = alg_in, alg_in = best_alg, best_alg = x;
best_alg->log[best_alg->ops] = m;
best_alg->op[best_alg->ops] = alg_add_t2_m;
cost_limit = cost;
}
}
q = t + 1;
q = q & -q;
m = exact_log2 (q);
if (m >= 0)
{
cost = shiftsub_cost[m];
synth_mult (alg_in, (t + 1) >> m, cost_limit - cost);
cost += alg_in->cost;
if (cost < cost_limit)
{
struct algorithm *x;
x = alg_in, alg_in = best_alg, best_alg = x;
best_alg->log[best_alg->ops] = m;
best_alg->op[best_alg->ops] = alg_sub_t2_m;
cost_limit = cost;
}
}
}
/* If cost_limit has not decreased since we stored it in alg_out->cost,
we have not found any algorithm. */
if (cost_limit == alg_out->cost)
return;
/* If we are getting a too long sequence for `struct algorithm'
to record, make this search fail. */
if (best_alg->ops == MAX_BITS_PER_WORD)
return;
/* Copy the algorithm from temporary space to the space at alg_out.
We avoid using structure assignment because the majority of
best_alg is normally undefined, and this is a critical function. */
alg_out->ops = best_alg->ops + 1;
alg_out->cost = cost_limit;
bcopy ((char *) best_alg->op, (char *) alg_out->op,
alg_out->ops * sizeof *alg_out->op);
bcopy ((char *) best_alg->log, (char *) alg_out->log,
alg_out->ops * sizeof *alg_out->log);
}
/* Perform a multiplication and return an rtx for the result.
MODE is mode of value; OP0 and OP1 are what to multiply (rtx's);
TARGET is a suggestion for where to store the result (an rtx).
We check specially for a constant integer as OP1.
If you want this check for OP0 as well, then before calling
you should swap the two operands if OP0 would be constant. */
rtx
expand_mult (mode, op0, op1, target, unsignedp)
enum machine_mode mode;
register rtx op0, op1, target;
int unsignedp;
{
rtx const_op1 = op1;
/* synth_mult does an `unsigned int' multiply. As long as the mode is
less than or equal in size to `unsigned int' this doesn't matter.
If the mode is larger than `unsigned int', then synth_mult works only
if the constant value exactly fits in an `unsigned int' without any
truncation. This means that multiplying by negative values does
not work; results are off by 2^32 on a 32 bit machine. */
/* If we are multiplying in DImode, it may still be a win
to try to work with shifts and adds. */
if (GET_CODE (op1) == CONST_DOUBLE
&& GET_MODE_CLASS (GET_MODE (op1)) == MODE_INT
&& HOST_BITS_PER_INT >= BITS_PER_WORD
&& CONST_DOUBLE_HIGH (op1) == 0)
const_op1 = GEN_INT (CONST_DOUBLE_LOW (op1));
else if (HOST_BITS_PER_INT < GET_MODE_BITSIZE (mode)
&& GET_CODE (op1) == CONST_INT
&& INTVAL (op1) < 0)
const_op1 = 0;
/* We used to test optimize here, on the grounds that it's better to
produce a smaller program when -O is not used.
But this causes such a terrible slowdown sometimes
that it seems better to use synth_mult always. */
if (const_op1 && GET_CODE (const_op1) == CONST_INT)
{
struct algorithm alg;
struct algorithm alg2;
HOST_WIDE_INT val = INTVAL (op1);
HOST_WIDE_INT val_so_far;
rtx insn;
int mult_cost;
enum {basic_variant, negate_variant, add_variant} variant = basic_variant;
/* Try to do the computation three ways: multiply by the negative of OP1
and then negate, do the multiplication directly, or do multiplication
by OP1 - 1. */
mult_cost = rtx_cost (gen_rtx (MULT, mode, op0, op1), SET);
mult_cost = MIN (12 * add_cost, mult_cost);
synth_mult (&alg, val, mult_cost);
/* This works only if the inverted value actually fits in an
`unsigned int' */
if (HOST_BITS_PER_INT >= GET_MODE_BITSIZE (mode))
{
synth_mult (&alg2, - val,
(alg.cost < mult_cost ? alg.cost : mult_cost) - negate_cost);
if (alg2.cost + negate_cost < alg.cost)
alg = alg2, variant = negate_variant;
}
/* This proves very useful for division-by-constant. */
synth_mult (&alg2, val - 1,
(alg.cost < mult_cost ? alg.cost : mult_cost) - add_cost);
if (alg2.cost + add_cost < alg.cost)
alg = alg2, variant = add_variant;
if (alg.cost < mult_cost)
{
/* We found something cheaper than a multiply insn. */
int opno;
rtx accum, tem;
op0 = protect_from_queue (op0, 0);
/* Avoid referencing memory over and over.
For speed, but also for correctness when mem is volatile. */
if (GET_CODE (op0) == MEM)
op0 = force_reg (mode, op0);
/* ACCUM starts out either as OP0 or as a zero, depending on
the first operation. */
if (alg.op[0] == alg_zero)
{
accum = copy_to_mode_reg (mode, const0_rtx);
val_so_far = 0;
}
else if (alg.op[0] == alg_m)
{
accum = copy_to_mode_reg (mode, op0);
val_so_far = 1;
}
else
abort ();
for (opno = 1; opno < alg.ops; opno++)
{
int log = alg.log[opno];
int preserve = preserve_subexpressions_p ();
rtx shift_subtarget = preserve ? 0 : accum;
rtx add_target
= (opno == alg.ops - 1 && target != 0 && variant != add_variant
? target : 0);
rtx accum_target = preserve ? 0 : accum;
switch (alg.op[opno])
{
case alg_shift:
accum = expand_shift (LSHIFT_EXPR, mode, accum,
build_int_2 (log, 0), NULL_RTX, 0);
val_so_far <<= log;
break;
case alg_add_t_m2:
tem = expand_shift (LSHIFT_EXPR, mode, op0,
build_int_2 (log, 0), NULL_RTX, 0);
accum = force_operand (gen_rtx (PLUS, mode, accum, tem),
add_target ? add_target : accum_target);
val_so_far += (HOST_WIDE_INT) 1 << log;
break;
case alg_sub_t_m2:
tem = expand_shift (LSHIFT_EXPR, mode, op0,
build_int_2 (log, 0), NULL_RTX, 0);
accum = force_operand (gen_rtx (MINUS, mode, accum, tem),
add_target ? add_target : accum_target);
val_so_far -= (HOST_WIDE_INT) 1 << log;
break;
case alg_add_t2_m:
accum = expand_shift (LSHIFT_EXPR, mode, accum,
build_int_2 (log, 0), shift_subtarget,
0);
accum = force_operand (gen_rtx (PLUS, mode, accum, op0),
add_target ? add_target : accum_target);
val_so_far = (val_so_far << log) + 1;
break;
case alg_sub_t2_m:
accum = expand_shift (LSHIFT_EXPR, mode, accum,
build_int_2 (log, 0), shift_subtarget,
0);
accum = force_operand (gen_rtx (MINUS, mode, accum, op0),
add_target ? add_target : accum_target);
val_so_far = (val_so_far << log) - 1;
break;
case alg_add_factor:
tem = expand_shift (LSHIFT_EXPR, mode, accum,
build_int_2 (log, 0), NULL_RTX, 0);
accum = force_operand (gen_rtx (PLUS, mode, accum, tem),
add_target ? add_target : accum_target);
val_so_far += val_so_far << log;
break;
case alg_sub_factor:
tem = expand_shift (LSHIFT_EXPR, mode, accum,
build_int_2 (log, 0), NULL_RTX, 0);
accum = force_operand (gen_rtx (MINUS, mode, tem, accum),
(add_target ? add_target
: preserve ? 0 : tem));
val_so_far = (val_so_far << log) - val_so_far;
break;
default:
abort ();;
}
/* Write a REG_EQUAL note on the last insn so that we can cse
multiplication sequences. */
insn = get_last_insn ();
REG_NOTES (insn)
= gen_rtx (EXPR_LIST, REG_EQUAL,
gen_rtx (MULT, mode, op0, GEN_INT (val_so_far)),
REG_NOTES (insn));
}
if (variant == negate_variant)
{
val_so_far = - val_so_far;
accum = expand_unop (mode, neg_optab, accum, target, 0);
}
else if (variant == add_variant)
{
val_so_far = val_so_far + 1;
accum = force_operand (gen_rtx (PLUS, mode, accum, op0), target);
}
if (val != val_so_far)
abort ();
return accum;
}
}
/* This used to use umul_optab if unsigned, but for non-widening multiply
there is no difference between signed and unsigned. */
op0 = expand_binop (mode, smul_optab,
op0, op1, target, unsignedp, OPTAB_LIB_WIDEN);
if (op0 == 0)
abort ();
return op0;
}
/* Return the smallest n such that 2**n >= X. */
int
ceil_log2 (x)
unsigned HOST_WIDE_INT x;
{
return floor_log2 (x - 1) + 1;
}
/* Choose a minimal N + 1 bit approximation to 1/D that can be used to
replace division by D, and put the least significant N bits of the result
in *MULTIPLIER_PTR and return the most significant bit.
The width of operations is N (should be <= HOST_BITS_PER_WIDE_INT), the
needed precision is in PRECISION (should be <= N).
PRECISION should be as small as possible so this function can choose
multiplier more freely.
The rounded-up logarithm of D is placed in *lgup_ptr. A shift count that
is to be used for a final right shift is placed in *POST_SHIFT_PTR.
Using this function, x/D will be equal to (x * m) >> (*POST_SHIFT_PTR),
where m is the full HOST_BITS_PER_WIDE_INT + 1 bit multiplier. */
static
unsigned HOST_WIDE_INT
choose_multiplier (d, n, precision, multiplier_ptr, post_shift_ptr, lgup_ptr)
unsigned HOST_WIDE_INT d;
int n;
int precision;
unsigned HOST_WIDE_INT *multiplier_ptr;
int *post_shift_ptr;
int *lgup_ptr;
{
unsigned HOST_WIDE_INT mhigh_hi, mhigh_lo;
unsigned HOST_WIDE_INT mlow_hi, mlow_lo;
int lgup, post_shift;
int pow, pow2;
unsigned HOST_WIDE_INT nh, nl, dummy1, dummy2;
/* lgup = ceil(log2(divisor)); */
lgup = ceil_log2 (d);
if (lgup > n)
abort ();
pow = n + lgup;
pow2 = n + lgup - precision;
if (pow == 2 * HOST_BITS_PER_WIDE_INT)
{
/* We could handle this with some effort, but this case is much better
handled directly with a scc insn, so rely on caller using that. */
abort ();
}
/* mlow = 2^(N + lgup)/d */
if (pow >= HOST_BITS_PER_WIDE_INT)
{
nh = (unsigned HOST_WIDE_INT) 1 << (pow - HOST_BITS_PER_WIDE_INT);
nl = 0;
}
else
{
nh = 0;
nl = (unsigned HOST_WIDE_INT) 1 << pow;
}
div_and_round_double (TRUNC_DIV_EXPR, 1, nl, nh, d, (HOST_WIDE_INT) 0,
&mlow_lo, &mlow_hi, &dummy1, &dummy2);
/* mhigh = (2^(N + lgup) + 2^N + lgup - precision)/d */
if (pow2 >= HOST_BITS_PER_WIDE_INT)
nh |= (unsigned HOST_WIDE_INT) 1 << (pow2 - HOST_BITS_PER_WIDE_INT);
else
nl |= (unsigned HOST_WIDE_INT) 1 << pow2;
div_and_round_double (TRUNC_DIV_EXPR, 1, nl, nh, d, (HOST_WIDE_INT) 0,
&mhigh_lo, &mhigh_hi, &dummy1, &dummy2);
if (mhigh_hi && nh - d >= d)
abort ();
if (mhigh_hi > 1 || mlow_hi > 1)
abort ();
/* assert that mlow < mhigh. */
if (! (mlow_hi < mhigh_hi || (mlow_hi == mhigh_hi && mlow_lo < mhigh_lo)))
abort();
/* If precision == N, then mlow, mhigh exceed 2^N
(but they do not exceed 2^(N+1)). */
/* Reduce to lowest terms */
for (post_shift = lgup; post_shift > 0; post_shift--)
{
unsigned HOST_WIDE_INT ml_lo = (mlow_hi << (HOST_BITS_PER_WIDE_INT - 1)) | (mlow_lo >> 1);
unsigned HOST_WIDE_INT mh_lo = (mhigh_hi << (HOST_BITS_PER_WIDE_INT - 1)) | (mhigh_lo >> 1);
if (ml_lo >= mh_lo)
break;
mlow_hi = 0;
mlow_lo = ml_lo;
mhigh_hi = 0;
mhigh_lo = mh_lo;
}
*post_shift_ptr = post_shift;
*lgup_ptr = lgup;
if (n < HOST_BITS_PER_WIDE_INT)
{
unsigned HOST_WIDE_INT mask = ((unsigned HOST_WIDE_INT) 1 << n) - 1;
*multiplier_ptr = mhigh_lo & mask;
return mhigh_lo >= mask;
}
else
{
*multiplier_ptr = mhigh_lo;
return mhigh_hi;
}
}
/* Compute the inverse of X mod 2**n, i.e., find Y such that X * Y is
congruent to 1 (mod 2**N). */
static unsigned HOST_WIDE_INT
invert_mod2n (x, n)
unsigned HOST_WIDE_INT x;
int n;
{
/* Solve x*y == 1 (mod 2^n), where x is odd. Return y. */
/* The algorithm notes that the choice y = x satisfies
x*y == 1 mod 2^3, since x is assumed odd.
Each iteration doubles the number of bits of significance in y. */
unsigned HOST_WIDE_INT mask;
unsigned HOST_WIDE_INT y = x;
int nbit = 3;
mask = (n == HOST_BITS_PER_WIDE_INT
? ~(unsigned HOST_WIDE_INT) 0
: ((unsigned HOST_WIDE_INT) 1 << n) - 1);
while (nbit < n)
{
y = y * (2 - x*y) & mask; /* Modulo 2^N */
nbit *= 2;
}
return y;
}
/* Emit code to adjust ADJ_OPERAND after multiplication of wrong signedness
flavor of OP0 and OP1. ADJ_OPERAND is already the high half of the
product OP0 x OP1. If UNSIGNEDP is nonzero, adjust the signed product
to become unsigned, if UNSIGNEDP is zero, adjust the unsigned product to
become signed.
The result is put in TARGET if that is convenient.
MODE is the mode of operation. */
rtx
expand_mult_highpart_adjust (mode, adj_operand, op0, op1, target, unsignedp)
enum machine_mode mode;
register rtx adj_operand, op0, op1, target;
int unsignedp;
{
rtx tem;
enum rtx_code adj_code = unsignedp ? PLUS : MINUS;
tem = expand_shift (RSHIFT_EXPR, mode, op0,
build_int_2 (GET_MODE_BITSIZE (mode) - 1, 0),
NULL_RTX, 0);
tem = expand_and (tem, op1, NULL_RTX);
adj_operand = force_operand (gen_rtx (adj_code, mode, adj_operand, tem),
adj_operand);
tem = expand_shift (RSHIFT_EXPR, mode, op1,
build_int_2 (GET_MODE_BITSIZE (mode) - 1, 0),
NULL_RTX, 0);
tem = expand_and (tem, op0, NULL_RTX);
target = force_operand (gen_rtx (adj_code, mode, adj_operand, tem), target);
return target;
}
/* Emit code to multiply OP0 and CNST1, putting the high half of the result
in TARGET if that is convenient, and return where the result is. If the
operation can not be performed, 0 is returned.
MODE is the mode of operation and result.
UNSIGNEDP nonzero means unsigned multiply.
MAX_COST is the total allowed cost for the expanded RTL. */
rtx
expand_mult_highpart (mode, op0, cnst1, target, unsignedp, max_cost)
enum machine_mode mode;
register rtx op0, target;
unsigned HOST_WIDE_INT cnst1;
int unsignedp;
int max_cost;
{
enum machine_mode wider_mode = GET_MODE_WIDER_MODE (mode);
optab mul_highpart_optab;
optab moptab;
rtx tem;
int size = GET_MODE_BITSIZE (mode);
rtx op1, wide_op1;
/* We can't support modes wider than HOST_BITS_PER_INT. */
if (size > HOST_BITS_PER_WIDE_INT)
abort ();
op1 = GEN_INT (cnst1);
if (GET_MODE_BITSIZE (wider_mode) <= HOST_BITS_PER_INT)
wide_op1 = op1;
else
wide_op1
= immed_double_const (cnst1,
(unsignedp
? (HOST_WIDE_INT) 0
: -(cnst1 >> (HOST_BITS_PER_WIDE_INT - 1))),
wider_mode);
/* expand_mult handles constant multiplication of word_mode
or narrower. It does a poor job for large modes. */
if (size < BITS_PER_WORD
&& mul_cost[(int) wider_mode] + shift_cost[size-1] < max_cost)
{
/* We have to do this, since expand_binop doesn't do conversion for
multiply. Maybe change expand_binop to handle widening multiply? */
op0 = convert_to_mode (wider_mode, op0, unsignedp);
tem = expand_mult (wider_mode, op0, wide_op1, NULL_RTX, unsignedp);
tem = expand_shift (RSHIFT_EXPR, wider_mode, tem,
build_int_2 (size, 0), NULL_RTX, 1);
return convert_modes (mode, wider_mode, tem, unsignedp);
}
if (target == 0)
target = gen_reg_rtx (mode);
/* Firstly, try using a multiplication insn that only generates the needed
high part of the product, and in the sign flavor of unsignedp. */
if (mul_highpart_cost[(int) mode] < max_cost)
{
mul_highpart_optab = unsignedp ? umul_highpart_optab : smul_highpart_optab;
target = expand_binop (mode, mul_highpart_optab,
op0, wide_op1, target, unsignedp, OPTAB_DIRECT);
if (target)
return target;
}
/* Secondly, same as above, but use sign flavor opposite of unsignedp.
Need to adjust the result after the multiplication. */
if (mul_highpart_cost[(int) mode] + 2 * shift_cost[size-1] + 4 * add_cost < max_cost)
{
mul_highpart_optab = unsignedp ? smul_highpart_optab : umul_highpart_optab;
target = expand_binop (mode, mul_highpart_optab,
op0, wide_op1, target, unsignedp, OPTAB_DIRECT);
if (target)
/* We used the wrong signedness. Adjust the result. */
return expand_mult_highpart_adjust (mode, target, op0,
op1, target, unsignedp);
}
/* Try widening multiplication. */
moptab = unsignedp ? umul_widen_optab : smul_widen_optab;
if (moptab->handlers[(int) wider_mode].insn_code != CODE_FOR_nothing
&& mul_widen_cost[(int) wider_mode] < max_cost)
{
op1 = force_reg (mode, op1);
goto try;
}
/* Try widening the mode and perform a non-widening multiplication. */
moptab = smul_optab;
if (smul_optab->handlers[(int) wider_mode].insn_code != CODE_FOR_nothing
&& mul_cost[(int) wider_mode] + shift_cost[size-1] < max_cost)
{
op1 = wide_op1;
goto try;
}
/* Try widening multiplication of opposite signedness, and adjust. */
moptab = unsignedp ? smul_widen_optab : umul_widen_optab;
if (moptab->handlers[(int) wider_mode].insn_code != CODE_FOR_nothing
&& (mul_widen_cost[(int) wider_mode]
+ 2 * shift_cost[size-1] + 4 * add_cost < max_cost))
{
rtx regop1 = force_reg (mode, op1);
tem = expand_binop (wider_mode, moptab, op0, regop1,
NULL_RTX, ! unsignedp, OPTAB_WIDEN);
if (tem != 0)
{
/* Extract the high half of the just generated product. */
tem = expand_shift (RSHIFT_EXPR, wider_mode, tem,
build_int_2 (size, 0), NULL_RTX, 1);
tem = convert_modes (mode, wider_mode, tem, unsignedp);
/* We used the wrong signedness. Adjust the result. */
return expand_mult_highpart_adjust (mode, tem, op0, op1,
target, unsignedp);
}
}
return 0;
try:
/* Pass NULL_RTX as target since TARGET has wrong mode. */
tem = expand_binop (wider_mode, moptab, op0, op1,
NULL_RTX, unsignedp, OPTAB_WIDEN);
if (tem == 0)
return 0;
/* Extract the high half of the just generated product. */
if (mode == word_mode)
{
return gen_highpart (mode, tem);
}
else
{
tem = expand_shift (RSHIFT_EXPR, wider_mode, tem,
build_int_2 (size, 0), NULL_RTX, 1);
return convert_modes (mode, wider_mode, tem, unsignedp);
}
}
/* Emit the code to divide OP0 by OP1, putting the result in TARGET
if that is convenient, and returning where the result is.
You may request either the quotient or the remainder as the result;
specify REM_FLAG nonzero to get the remainder.
CODE is the expression code for which kind of division this is;
it controls how rounding is done. MODE is the machine mode to use.
UNSIGNEDP nonzero means do unsigned division. */
/* ??? For CEIL_MOD_EXPR, can compute incorrect remainder with ANDI
and then correct it by or'ing in missing high bits
if result of ANDI is nonzero.
For ROUND_MOD_EXPR, can use ANDI and then sign-extend the result.
This could optimize to a bfexts instruction.
But C doesn't use these operations, so their optimizations are
left for later. */
#define EXACT_POWER_OF_2_OR_ZERO_P(x) (((x) & ((x) - 1)) == 0)
rtx
expand_divmod (rem_flag, code, mode, op0, op1, target, unsignedp)
int rem_flag;
enum tree_code code;
enum machine_mode mode;
register rtx op0, op1, target;
int unsignedp;
{
enum machine_mode compute_mode;
register rtx tquotient;
rtx quotient = 0, remainder = 0;
rtx last;
int size;
rtx insn, set;
optab optab1, optab2;
int op1_is_constant, op1_is_pow2;
int max_cost, extra_cost;
op1_is_constant = GET_CODE (op1) == CONST_INT;
op1_is_pow2 = (op1_is_constant
&& ((EXACT_POWER_OF_2_OR_ZERO_P (INTVAL (op1))
|| EXACT_POWER_OF_2_OR_ZERO_P (-INTVAL (op1)))));
/*
This is the structure of expand_divmod:
First comes code to fix up the operands so we can perform the operations
correctly and efficiently.
Second comes a switch statement with code specific for each rounding mode.
For some special operands this code emits all RTL for the desired
operation, for other cases, it generates only a quotient and stores it in
QUOTIENT. The case for trunc division/remainder might leave quotient = 0,
to indicate that it has not done anything.
Last comes code that finishes the operation. If QUOTIENT is set and
REM_FLAG is set, the remainder is computed as OP0 - QUOTIENT * OP1. If
QUOTIENT is not set, it is computed using trunc rounding.
We try to generate special code for division and remainder when OP1 is a
constant. If |OP1| = 2**n we can use shifts and some other fast
operations. For other values of OP1, we compute a carefully selected
fixed-point approximation m = 1/OP1, and generate code that multiplies OP0
by m.
In all cases but EXACT_DIV_EXPR, this multiplication requires the upper
half of the product. Different strategies for generating the product are
implemented in expand_mult_highpart.
If what we actually want is the remainder, we generate that by another
by-constant multiplication and a subtraction. */
/* We shouldn't be called with OP1 == const1_rtx, but some of the
code below will malfunction if we are, so check here and handle
the special case if so. */
if (op1 == const1_rtx)
return rem_flag ? const0_rtx : op0;
if (target
/* Don't use the function value register as a target
since we have to read it as well as write it,
and function-inlining gets confused by this. */
&& ((REG_P (target) && REG_FUNCTION_VALUE_P (target))
/* Don't clobber an operand while doing a multi-step calculation. */
|| ((rem_flag || op1_is_constant)
&& (reg_mentioned_p (target, op0)
|| (GET_CODE (op0) == MEM && GET_CODE (target) == MEM)))
|| reg_mentioned_p (target, op1)
|| (GET_CODE (op1) == MEM && GET_CODE (target) == MEM)))
target = 0;
/* Get the mode in which to perform this computation. Normally it will
be MODE, but sometimes we can't do the desired operation in MODE.
If so, pick a wider mode in which we can do the operation. Convert
to that mode at the start to avoid repeated conversions.
First see what operations we need. These depend on the expression
we are evaluating. (We assume that divxx3 insns exist under the
same conditions that modxx3 insns and that these insns don't normally
fail. If these assumptions are not correct, we may generate less
efficient code in some cases.)
Then see if we find a mode in which we can open-code that operation
(either a division, modulus, or shift). Finally, check for the smallest
mode for which we can do the operation with a library call. */
/* We might want to refine this now that we have division-by-constant
optimization. Since expand_mult_highpart tries so many variants, it is
not straightforward to generalize this. Maybe we should make an array
of possible modes in init_expmed? Save this for GCC 2.7. */
optab1 = (op1_is_pow2 ? (unsignedp ? lshr_optab : ashr_optab)
: (unsignedp ? udiv_optab : sdiv_optab));
optab2 = (op1_is_pow2 ? optab1 : (unsignedp ? udivmod_optab : sdivmod_optab));
for (compute_mode = mode; compute_mode != VOIDmode;
compute_mode = GET_MODE_WIDER_MODE (compute_mode))
if (optab1->handlers[(int) compute_mode].insn_code != CODE_FOR_nothing
|| optab2->handlers[(int) compute_mode].insn_code != CODE_FOR_nothing)
break;
if (compute_mode == VOIDmode)
for (compute_mode = mode; compute_mode != VOIDmode;
compute_mode = GET_MODE_WIDER_MODE (compute_mode))
if (optab1->handlers[(int) compute_mode].libfunc
|| optab2->handlers[(int) compute_mode].libfunc)
break;
/* If we still couldn't find a mode, use MODE, but we'll probably abort
in expand_binop. */
if (compute_mode == VOIDmode)
compute_mode = mode;
if (target && GET_MODE (target) == compute_mode)
tquotient = target;
else
tquotient = gen_reg_rtx (compute_mode);
size = GET_MODE_BITSIZE (compute_mode);
#if 0
/* It should be possible to restrict the precision to GET_MODE_BITSIZE
(mode), and thereby get better code when OP1 is a constant. Do that
later. It will require going over all usages of SIZE below. */
size = GET_MODE_BITSIZE (mode);
#endif
max_cost = div_cost[(int) compute_mode]
- (rem_flag ? mul_cost[(int) compute_mode] + add_cost : 0);
/* Now convert to the best mode to use. */
if (compute_mode != mode)
{
op0 = convert_modes (compute_mode, mode, op0, unsignedp);
op1 = convert_modes (compute_mode, mode, op1, unsignedp);
}
/* If one of the operands is a volatile MEM, copy it into a register. */
if (GET_CODE (op0) == MEM && MEM_VOLATILE_P (op0))
op0 = force_reg (compute_mode, op0);
if (GET_CODE (op1) == MEM && MEM_VOLATILE_P (op1))
op1 = force_reg (compute_mode, op1);
/* If we need the remainder or if OP1 is constant, we need to
put OP0 in a register in case it has any queued subexpressions. */
if (rem_flag || op1_is_constant)
op0 = force_reg (compute_mode, op0);
last = get_last_insn ();
/* Promote floor rounding to trunc rounding for unsigned operations. */
if (unsignedp)
{
if (code == FLOOR_DIV_EXPR)
code = TRUNC_DIV_EXPR;
if (code == FLOOR_MOD_EXPR)
code = TRUNC_MOD_EXPR;
}
if (op1 != const0_rtx)
switch (code)
{
case TRUNC_MOD_EXPR:
case TRUNC_DIV_EXPR:
if (op1_is_constant)
{
if (unsignedp)
{
unsigned HOST_WIDE_INT mh, ml;
int pre_shift, post_shift;
int dummy;
unsigned HOST_WIDE_INT d = INTVAL (op1);
if (EXACT_POWER_OF_2_OR_ZERO_P (d))
{
pre_shift = floor_log2 (d);
if (rem_flag)
{
remainder
= expand_binop (compute_mode, and_optab, op0,
GEN_INT (((HOST_WIDE_INT) 1 << pre_shift) - 1),
remainder, 1,
OPTAB_LIB_WIDEN);
if (remainder)
return gen_lowpart (mode, remainder);
}
quotient = expand_shift (RSHIFT_EXPR, compute_mode, op0,
build_int_2 (pre_shift, 0),
tquotient, 1);
}
else if (size <= HOST_BITS_PER_WIDE_INT)
{
if (d >= ((unsigned HOST_WIDE_INT) 1 << (size - 1)))
{
/* Most significant bit of divisor is set; emit an scc
insn. */
quotient = emit_store_flag (tquotient, GEU, op0, op1,
compute_mode, 1, 1);
if (quotient == 0)
goto fail1;
}
else
{
/* Find a suitable multiplier and right shift count
instead of multiplying with D. */
mh = choose_multiplier (d, size, size,
&ml, &post_shift, &dummy);
/* If the suggested multiplier is more than SIZE bits,
we can do better for even divisors, using an
initial right shift. */
if (mh != 0 && (d & 1) == 0)
{
pre_shift = floor_log2 (d & -d);
mh = choose_multiplier (d >> pre_shift, size,
size - pre_shift,
&ml, &post_shift, &dummy);
if (mh)
abort ();
}
else
pre_shift = 0;
if (mh != 0)
{
rtx t1, t2, t3, t4;
extra_cost = (shift_cost[post_shift - 1]
+ shift_cost[1] + 2 * add_cost);
t1 = expand_mult_highpart (compute_mode, op0, ml,
NULL_RTX, 1,
max_cost - extra_cost);
if (t1 == 0)
goto fail1;
t2 = force_operand (gen_rtx (MINUS, compute_mode,
op0, t1),
NULL_RTX);
t3 = expand_shift (RSHIFT_EXPR, compute_mode, t2,
build_int_2 (1, 0), NULL_RTX,1);
t4 = force_operand (gen_rtx (PLUS, compute_mode,
t1, t3),
NULL_RTX);
quotient
= expand_shift (RSHIFT_EXPR, compute_mode, t4,
build_int_2 (post_shift - 1, 0),
tquotient, 1);
}
else
{
rtx t1, t2;
t1 = expand_shift (RSHIFT_EXPR, compute_mode, op0,
build_int_2 (pre_shift, 0),
NULL_RTX, 1);
extra_cost = (shift_cost[pre_shift]
+ shift_cost[post_shift]);
t2 = expand_mult_highpart (compute_mode, t1, ml,
NULL_RTX, 1,
max_cost - extra_cost);
if (t2 == 0)
goto fail1;
quotient
= expand_shift (RSHIFT_EXPR, compute_mode, t2,
build_int_2 (post_shift, 0),
tquotient, 1);
}
}
}
else /* Too wide mode to use tricky code */
break;
insn = get_last_insn ();
if (insn != last
&& (set = single_set (insn)) != 0
&& SET_DEST (set) == quotient)
REG_NOTES (insn)
= gen_rtx (EXPR_LIST, REG_EQUAL,
gen_rtx (UDIV, compute_mode, op0, op1),
REG_NOTES (insn));
}
else /* TRUNC_DIV, signed */
{
unsigned HOST_WIDE_INT ml;
int lgup, post_shift;
HOST_WIDE_INT d = INTVAL (op1);
unsigned HOST_WIDE_INT abs_d = d >= 0 ? d : -d;
/* n rem d = n rem -d */
if (rem_flag && d < 0)
{
d = abs_d;
op1 = GEN_INT (abs_d);
}
if (d == 1)
quotient = op0;
else if (d == -1)
quotient = expand_unop (compute_mode, neg_optab, op0,
tquotient, 0);
else if (abs_d == (unsigned HOST_WIDE_INT) 1 << (size - 1))
{
/* This case is not handled correctly below. */
quotient = emit_store_flag (tquotient, EQ, op0, op1,
compute_mode, 1, 1);
if (quotient == 0)
goto fail1;
}
else if (EXACT_POWER_OF_2_OR_ZERO_P (d)
&& (rem_flag ? smod_pow2_cheap : sdiv_pow2_cheap))
;
else if (EXACT_POWER_OF_2_OR_ZERO_P (abs_d))
{
lgup = floor_log2 (abs_d);
if (abs_d != 2 && BRANCH_COST < 3)
{
rtx label = gen_label_rtx ();
rtx t1;
t1 = copy_to_mode_reg (compute_mode, op0);
emit_cmp_insn (t1, const0_rtx, GE,
NULL_RTX, compute_mode, 0, 0);
emit_jump_insn (gen_bge (label));
expand_inc (t1, GEN_INT (abs_d - 1));
emit_label (label);
quotient = expand_shift (RSHIFT_EXPR, compute_mode, t1,
build_int_2 (lgup, 0),
tquotient, 0);
}
else
{
rtx t1, t2, t3;
t1 = expand_shift (RSHIFT_EXPR, compute_mode, op0,
build_int_2 (size - 1, 0),
NULL_RTX, 0);
t2 = expand_shift (RSHIFT_EXPR, compute_mode, t1,
build_int_2 (size - lgup, 0),
NULL_RTX, 1);
t3 = force_operand (gen_rtx (PLUS, compute_mode,
op0, t2),
NULL_RTX);
quotient = expand_shift (RSHIFT_EXPR, compute_mode, t3,
build_int_2 (lgup, 0),
tquotient, 0);
}
/* We have computed OP0 / abs(OP1). If OP1 is negative, negate
the quotient. */
if (d < 0)
{
insn = get_last_insn ();
if (insn != last
&& (set = single_set (insn)) != 0
&& SET_DEST (set) == quotient)
REG_NOTES (insn)