| /* Transformations based on profile information for values. |
| Copyright (C) 2003-2024 Free Software Foundation, Inc. |
| |
| This file is part of GCC. |
| |
| GCC is free software; you can redistribute it and/or modify it under |
| the terms of the GNU General Public License as published by the Free |
| Software Foundation; either version 3, or (at your option) any later |
| version. |
| |
| GCC is distributed in the hope that it will be useful, but WITHOUT ANY |
| WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with GCC; see the file COPYING3. If not see |
| <http://www.gnu.org/licenses/>. */ |
| |
| #include "config.h" |
| #include "system.h" |
| #include "coretypes.h" |
| #include "backend.h" |
| #include "rtl.h" |
| #include "tree.h" |
| #include "gimple.h" |
| #include "cfghooks.h" |
| #include "ssa.h" |
| #include "cgraph.h" |
| #include "coverage.h" |
| #include "data-streamer.h" |
| #include "diagnostic.h" |
| #include "fold-const.h" |
| #include "tree-nested.h" |
| #include "calls.h" |
| #include "expr.h" |
| #include "value-prof.h" |
| #include "tree-eh.h" |
| #include "gimplify.h" |
| #include "gimple-iterator.h" |
| #include "tree-cfg.h" |
| #include "gimple-pretty-print.h" |
| #include "dumpfile.h" |
| #include "builtins.h" |
| |
| /* In this file value profile based optimizations are placed. Currently the |
| following optimizations are implemented (for more detailed descriptions |
| see comments at value_profile_transformations): |
| |
| 1) Division/modulo specialization. Provided that we can determine that the |
| operands of the division have some special properties, we may use it to |
| produce more effective code. |
| |
| 2) Indirect/virtual call specialization. If we can determine most |
| common function callee in indirect/virtual call. We can use this |
| information to improve code effectiveness (especially info for |
| the inliner). |
| |
| 3) Speculative prefetching. If we are able to determine that the difference |
| between addresses accessed by a memory reference is usually constant, we |
| may add the prefetch instructions. |
| FIXME: This transformation was removed together with RTL based value |
| profiling. |
| |
| |
| Value profiling internals |
| ========================== |
| |
| Every value profiling transformation starts with defining what values |
| to profile. There are different histogram types (see HIST_TYPE_* in |
| value-prof.h) and each transformation can request one or more histogram |
| types per GIMPLE statement. The function gimple_find_values_to_profile() |
| collects the values to profile in a vec, and adds the number of counters |
| required for the different histogram types. |
| |
| For a -fprofile-generate run, the statements for which values should be |
| recorded, are instrumented in instrument_values(). The instrumentation |
| is done by helper functions that can be found in tree-profile.cc, where |
| new types of histograms can be added if necessary. |
| |
| After a -fprofile-use, the value profiling data is read back in by |
| compute_value_histograms() that translates the collected data to |
| histograms and attaches them to the profiled statements via |
| gimple_add_histogram_value(). Histograms are stored in a hash table |
| that is attached to every intrumented function, see VALUE_HISTOGRAMS |
| in function.h. |
| |
| The value-profile transformations driver is the function |
| gimple_value_profile_transformations(). It traverses all statements in |
| the to-be-transformed function, and looks for statements with one or |
| more histograms attached to it. If a statement has histograms, the |
| transformation functions are called on the statement. |
| |
| Limitations / FIXME / TODO: |
| * Only one histogram of each type can be associated with a statement. |
| * Some value profile transformations are done in builtins.cc (?!) |
| * Updating of histograms needs some TLC. |
| * The value profiling code could be used to record analysis results |
| from non-profiling (e.g. VRP). |
| * Adding new profilers should be simplified, starting with a cleanup |
| of what-happens-where and with making gimple_find_values_to_profile |
| and gimple_value_profile_transformations table-driven, perhaps... |
| */ |
| |
| static bool gimple_divmod_fixed_value_transform (gimple_stmt_iterator *); |
| static bool gimple_mod_pow2_value_transform (gimple_stmt_iterator *); |
| static bool gimple_mod_subtract_transform (gimple_stmt_iterator *); |
| static bool gimple_stringops_transform (gimple_stmt_iterator *); |
| static void dump_ic_profile (gimple_stmt_iterator *gsi); |
| |
| /* Allocate histogram value. */ |
| |
| histogram_value |
| gimple_alloc_histogram_value (struct function *fun ATTRIBUTE_UNUSED, |
| enum hist_type type, gimple *stmt, tree value) |
| { |
| histogram_value hist = (histogram_value) xcalloc (1, sizeof (*hist)); |
| hist->hvalue.value = value; |
| hist->hvalue.stmt = stmt; |
| hist->type = type; |
| return hist; |
| } |
| |
| /* Hash value for histogram. */ |
| |
| static hashval_t |
| histogram_hash (const void *x) |
| { |
| return htab_hash_pointer (((const_histogram_value)x)->hvalue.stmt); |
| } |
| |
| /* Return nonzero if statement for histogram_value X is Y. */ |
| |
| static int |
| histogram_eq (const void *x, const void *y) |
| { |
| return ((const_histogram_value) x)->hvalue.stmt == (const gimple *) y; |
| } |
| |
| /* Set histogram for STMT. */ |
| |
| static void |
| set_histogram_value (struct function *fun, gimple *stmt, histogram_value hist) |
| { |
| void **loc; |
| if (!hist && !VALUE_HISTOGRAMS (fun)) |
| return; |
| if (!VALUE_HISTOGRAMS (fun)) |
| VALUE_HISTOGRAMS (fun) = htab_create (1, histogram_hash, |
| histogram_eq, NULL); |
| loc = htab_find_slot_with_hash (VALUE_HISTOGRAMS (fun), stmt, |
| htab_hash_pointer (stmt), |
| hist ? INSERT : NO_INSERT); |
| if (!hist) |
| { |
| if (loc) |
| htab_clear_slot (VALUE_HISTOGRAMS (fun), loc); |
| return; |
| } |
| *loc = hist; |
| } |
| |
| /* Get histogram list for STMT. */ |
| |
| histogram_value |
| gimple_histogram_value (struct function *fun, gimple *stmt) |
| { |
| if (!VALUE_HISTOGRAMS (fun)) |
| return NULL; |
| return (histogram_value) htab_find_with_hash (VALUE_HISTOGRAMS (fun), stmt, |
| htab_hash_pointer (stmt)); |
| } |
| |
| /* Add histogram for STMT. */ |
| |
| void |
| gimple_add_histogram_value (struct function *fun, gimple *stmt, |
| histogram_value hist) |
| { |
| hist->hvalue.next = gimple_histogram_value (fun, stmt); |
| set_histogram_value (fun, stmt, hist); |
| hist->fun = fun; |
| } |
| |
| /* Remove histogram HIST from STMT's histogram list. */ |
| |
| void |
| gimple_remove_histogram_value (struct function *fun, gimple *stmt, |
| histogram_value hist) |
| { |
| histogram_value hist2 = gimple_histogram_value (fun, stmt); |
| if (hist == hist2) |
| { |
| set_histogram_value (fun, stmt, hist->hvalue.next); |
| } |
| else |
| { |
| while (hist2->hvalue.next != hist) |
| hist2 = hist2->hvalue.next; |
| hist2->hvalue.next = hist->hvalue.next; |
| } |
| free (hist->hvalue.counters); |
| if (flag_checking) |
| memset (hist, 0xab, sizeof (*hist)); |
| free (hist); |
| } |
| |
| /* Lookup histogram of type TYPE in the STMT. */ |
| |
| histogram_value |
| gimple_histogram_value_of_type (struct function *fun, gimple *stmt, |
| enum hist_type type) |
| { |
| histogram_value hist; |
| for (hist = gimple_histogram_value (fun, stmt); hist; |
| hist = hist->hvalue.next) |
| if (hist->type == type) |
| return hist; |
| return NULL; |
| } |
| |
| /* Dump information about HIST to DUMP_FILE. */ |
| |
| static void |
| dump_histogram_value (FILE *dump_file, histogram_value hist) |
| { |
| switch (hist->type) |
| { |
| case HIST_TYPE_INTERVAL: |
| if (hist->hvalue.counters) |
| { |
| fprintf (dump_file, "Interval counter range [%d,%d]: [", |
| hist->hdata.intvl.int_start, |
| (hist->hdata.intvl.int_start |
| + hist->hdata.intvl.steps - 1)); |
| |
| unsigned int i; |
| for (i = 0; i < hist->hdata.intvl.steps; i++) |
| { |
| fprintf (dump_file, "%d:%" PRId64, |
| hist->hdata.intvl.int_start + i, |
| (int64_t) hist->hvalue.counters[i]); |
| if (i != hist->hdata.intvl.steps - 1) |
| fprintf (dump_file, ", "); |
| } |
| fprintf (dump_file, "] outside range: %" PRId64 ".\n", |
| (int64_t) hist->hvalue.counters[i]); |
| } |
| break; |
| |
| case HIST_TYPE_POW2: |
| if (hist->hvalue.counters) |
| fprintf (dump_file, "Pow2 counter pow2:%" PRId64 |
| " nonpow2:%" PRId64 ".\n", |
| (int64_t) hist->hvalue.counters[1], |
| (int64_t) hist->hvalue.counters[0]); |
| break; |
| |
| case HIST_TYPE_TOPN_VALUES: |
| case HIST_TYPE_INDIR_CALL: |
| if (hist->hvalue.counters) |
| { |
| fprintf (dump_file, |
| (hist->type == HIST_TYPE_TOPN_VALUES |
| ? "Top N value counter" : "Indirect call counter")); |
| if (hist->hvalue.counters) |
| { |
| unsigned count = hist->hvalue.counters[1]; |
| fprintf (dump_file, " all: %" PRId64 ", %" PRId64 " values: ", |
| (int64_t) hist->hvalue.counters[0], (int64_t) count); |
| for (unsigned i = 0; i < count; i++) |
| { |
| fprintf (dump_file, "[%" PRId64 ":%" PRId64 "]", |
| (int64_t) hist->hvalue.counters[2 * i + 2], |
| (int64_t) hist->hvalue.counters[2 * i + 3]); |
| if (i != count - 1) |
| fprintf (dump_file, ", "); |
| } |
| fprintf (dump_file, ".\n"); |
| } |
| } |
| break; |
| |
| case HIST_TYPE_AVERAGE: |
| if (hist->hvalue.counters) |
| fprintf (dump_file, "Average value sum:%" PRId64 |
| " times:%" PRId64 ".\n", |
| (int64_t) hist->hvalue.counters[0], |
| (int64_t) hist->hvalue.counters[1]); |
| break; |
| |
| case HIST_TYPE_IOR: |
| if (hist->hvalue.counters) |
| fprintf (dump_file, "IOR value ior:%" PRId64 ".\n", |
| (int64_t) hist->hvalue.counters[0]); |
| break; |
| |
| case HIST_TYPE_TIME_PROFILE: |
| if (hist->hvalue.counters) |
| fprintf (dump_file, "Time profile time:%" PRId64 ".\n", |
| (int64_t) hist->hvalue.counters[0]); |
| break; |
| default: |
| gcc_unreachable (); |
| } |
| } |
| |
| /* Dump information about HIST to DUMP_FILE. */ |
| |
| void |
| stream_out_histogram_value (struct output_block *ob, histogram_value hist) |
| { |
| struct bitpack_d bp; |
| unsigned int i; |
| |
| bp = bitpack_create (ob->main_stream); |
| bp_pack_enum (&bp, hist_type, HIST_TYPE_MAX, hist->type); |
| bp_pack_value (&bp, hist->hvalue.next != NULL, 1); |
| streamer_write_bitpack (&bp); |
| switch (hist->type) |
| { |
| case HIST_TYPE_INTERVAL: |
| streamer_write_hwi (ob, hist->hdata.intvl.int_start); |
| streamer_write_uhwi (ob, hist->hdata.intvl.steps); |
| break; |
| default: |
| break; |
| } |
| for (i = 0; i < hist->n_counters; i++) |
| { |
| /* When user uses an unsigned type with a big value, constant converted |
| to gcov_type (a signed type) can be negative. */ |
| gcov_type value = hist->hvalue.counters[i]; |
| streamer_write_gcov_count (ob, value); |
| } |
| if (hist->hvalue.next) |
| stream_out_histogram_value (ob, hist->hvalue.next); |
| } |
| |
| /* Dump information about HIST to DUMP_FILE. */ |
| |
| void |
| stream_in_histogram_value (class lto_input_block *ib, gimple *stmt) |
| { |
| enum hist_type type; |
| unsigned int ncounters = 0; |
| struct bitpack_d bp; |
| unsigned int i; |
| histogram_value new_val; |
| bool next; |
| histogram_value *next_p = NULL; |
| |
| do |
| { |
| bp = streamer_read_bitpack (ib); |
| type = bp_unpack_enum (&bp, hist_type, HIST_TYPE_MAX); |
| next = bp_unpack_value (&bp, 1); |
| new_val = gimple_alloc_histogram_value (cfun, type, stmt); |
| switch (type) |
| { |
| case HIST_TYPE_INTERVAL: |
| new_val->hdata.intvl.int_start = streamer_read_hwi (ib); |
| new_val->hdata.intvl.steps = streamer_read_uhwi (ib); |
| ncounters = new_val->hdata.intvl.steps + 2; |
| break; |
| |
| case HIST_TYPE_POW2: |
| case HIST_TYPE_AVERAGE: |
| ncounters = 2; |
| break; |
| |
| case HIST_TYPE_TOPN_VALUES: |
| case HIST_TYPE_INDIR_CALL: |
| break; |
| |
| case HIST_TYPE_IOR: |
| case HIST_TYPE_TIME_PROFILE: |
| ncounters = 1; |
| break; |
| |
| default: |
| gcc_unreachable (); |
| } |
| |
| /* TOP N counters have variable number of counters. */ |
| if (type == HIST_TYPE_INDIR_CALL || type == HIST_TYPE_TOPN_VALUES) |
| { |
| gcov_type total = streamer_read_gcov_count (ib); |
| gcov_type ncounters = streamer_read_gcov_count (ib); |
| new_val->hvalue.counters = XNEWVAR (gcov_type, |
| sizeof (*new_val->hvalue.counters) |
| * (2 + 2 * ncounters)); |
| new_val->hvalue.counters[0] = total; |
| new_val->hvalue.counters[1] = ncounters; |
| new_val->n_counters = 2 + 2 * ncounters; |
| for (i = 0; i < 2 * ncounters; i++) |
| new_val->hvalue.counters[2 + i] = streamer_read_gcov_count (ib); |
| } |
| else |
| { |
| new_val->hvalue.counters = XNEWVAR (gcov_type, |
| sizeof (*new_val->hvalue.counters) |
| * ncounters); |
| new_val->n_counters = ncounters; |
| for (i = 0; i < ncounters; i++) |
| new_val->hvalue.counters[i] = streamer_read_gcov_count (ib); |
| } |
| |
| if (!next_p) |
| gimple_add_histogram_value (cfun, stmt, new_val); |
| else |
| *next_p = new_val; |
| next_p = &new_val->hvalue.next; |
| } |
| while (next); |
| } |
| |
| /* Dump all histograms attached to STMT to DUMP_FILE. */ |
| |
| void |
| dump_histograms_for_stmt (struct function *fun, FILE *dump_file, gimple *stmt) |
| { |
| histogram_value hist; |
| for (hist = gimple_histogram_value (fun, stmt); hist; hist = hist->hvalue.next) |
| dump_histogram_value (dump_file, hist); |
| } |
| |
| /* Remove all histograms associated with STMT. */ |
| |
| void |
| gimple_remove_stmt_histograms (struct function *fun, gimple *stmt) |
| { |
| histogram_value val; |
| while ((val = gimple_histogram_value (fun, stmt)) != NULL) |
| gimple_remove_histogram_value (fun, stmt, val); |
| } |
| |
| /* Duplicate all histograms associates with OSTMT to STMT. */ |
| |
| void |
| gimple_duplicate_stmt_histograms (struct function *fun, gimple *stmt, |
| struct function *ofun, gimple *ostmt) |
| { |
| histogram_value val; |
| for (val = gimple_histogram_value (ofun, ostmt); val != NULL; val = val->hvalue.next) |
| { |
| histogram_value new_val = gimple_alloc_histogram_value (fun, val->type); |
| memcpy (new_val, val, sizeof (*val)); |
| new_val->hvalue.stmt = stmt; |
| new_val->hvalue.counters = XNEWVAR (gcov_type, sizeof (*new_val->hvalue.counters) * new_val->n_counters); |
| memcpy (new_val->hvalue.counters, val->hvalue.counters, sizeof (*new_val->hvalue.counters) * new_val->n_counters); |
| gimple_add_histogram_value (fun, stmt, new_val); |
| } |
| } |
| |
| /* Move all histograms associated with OSTMT to STMT. */ |
| |
| void |
| gimple_move_stmt_histograms (struct function *fun, gimple *stmt, gimple *ostmt) |
| { |
| histogram_value val = gimple_histogram_value (fun, ostmt); |
| if (val) |
| { |
| /* The following three statements can't be reordered, |
| because histogram hashtab relies on stmt field value |
| for finding the exact slot. */ |
| set_histogram_value (fun, ostmt, NULL); |
| for (; val != NULL; val = val->hvalue.next) |
| val->hvalue.stmt = stmt; |
| set_histogram_value (fun, stmt, val); |
| } |
| } |
| |
| static bool error_found = false; |
| |
| /* Helper function for verify_histograms. For each histogram reachable via htab |
| walk verify that it was reached via statement walk. */ |
| |
| static int |
| visit_hist (void **slot, void *data) |
| { |
| hash_set<histogram_value> *visited = (hash_set<histogram_value> *) data; |
| histogram_value hist = *(histogram_value *) slot; |
| |
| if (!visited->contains (hist) |
| && hist->type != HIST_TYPE_TIME_PROFILE) |
| { |
| error ("dead histogram"); |
| dump_histogram_value (stderr, hist); |
| debug_gimple_stmt (hist->hvalue.stmt); |
| error_found = true; |
| } |
| return 1; |
| } |
| |
| /* Verify sanity of the histograms. */ |
| |
| DEBUG_FUNCTION void |
| verify_histograms (void) |
| { |
| basic_block bb; |
| gimple_stmt_iterator gsi; |
| histogram_value hist; |
| |
| error_found = false; |
| hash_set<histogram_value> visited_hists; |
| FOR_EACH_BB_FN (bb, cfun) |
| for (gsi = gsi_start_bb (bb); !gsi_end_p (gsi); gsi_next (&gsi)) |
| { |
| gimple *stmt = gsi_stmt (gsi); |
| |
| for (hist = gimple_histogram_value (cfun, stmt); hist; |
| hist = hist->hvalue.next) |
| { |
| if (hist->hvalue.stmt != stmt) |
| { |
| error ("histogram value statement does not correspond to " |
| "the statement it is associated with"); |
| debug_gimple_stmt (stmt); |
| dump_histogram_value (stderr, hist); |
| error_found = true; |
| } |
| visited_hists.add (hist); |
| } |
| } |
| if (VALUE_HISTOGRAMS (cfun)) |
| htab_traverse (VALUE_HISTOGRAMS (cfun), visit_hist, &visited_hists); |
| if (error_found) |
| internal_error ("%qs failed", __func__); |
| } |
| |
| /* Helper function for verify_histograms. For each histogram reachable via htab |
| walk verify that it was reached via statement walk. */ |
| |
| static int |
| free_hist (void **slot, void *data ATTRIBUTE_UNUSED) |
| { |
| histogram_value hist = *(histogram_value *) slot; |
| free (hist->hvalue.counters); |
| free (hist); |
| return 1; |
| } |
| |
| void |
| free_histograms (struct function *fn) |
| { |
| if (VALUE_HISTOGRAMS (fn)) |
| { |
| htab_traverse (VALUE_HISTOGRAMS (fn), free_hist, NULL); |
| htab_delete (VALUE_HISTOGRAMS (fn)); |
| VALUE_HISTOGRAMS (fn) = NULL; |
| } |
| } |
| |
| /* The overall number of invocations of the counter should match |
| execution count of basic block. Report it as error rather than |
| internal error as it might mean that user has misused the profile |
| somehow. */ |
| |
| static bool |
| check_counter (gimple *stmt, const char * name, |
| gcov_type *count, gcov_type *all, profile_count bb_count_d) |
| { |
| gcov_type bb_count = bb_count_d.ipa ().to_gcov_type (); |
| if (*all != bb_count || *count > *all) |
| { |
| dump_user_location_t locus; |
| locus = ((stmt != NULL) |
| ? dump_user_location_t (stmt) |
| : dump_user_location_t::from_function_decl |
| (current_function_decl)); |
| if (flag_profile_correction) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, locus, |
| "correcting inconsistent value profile: %s " |
| "profiler overall count (%d) does not match BB " |
| "count (%d)\n", name, (int)*all, (int)bb_count); |
| *all = bb_count; |
| if (*count > *all) |
| *count = *all; |
| return false; |
| } |
| else |
| { |
| error_at (locus.get_location_t (), "corrupted value profile: %s " |
| "profile counter (%d out of %d) inconsistent with " |
| "basic-block count (%d)", |
| name, |
| (int) *count, |
| (int) *all, |
| (int) bb_count); |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| /* GIMPLE based transformations. */ |
| |
| bool |
| gimple_value_profile_transformations (void) |
| { |
| basic_block bb; |
| gimple_stmt_iterator gsi; |
| bool changed = false; |
| |
| FOR_EACH_BB_FN (bb, cfun) |
| { |
| for (gsi = gsi_start_bb (bb); !gsi_end_p (gsi); gsi_next (&gsi)) |
| { |
| gimple *stmt = gsi_stmt (gsi); |
| histogram_value th = gimple_histogram_value (cfun, stmt); |
| if (!th) |
| continue; |
| |
| if (dump_file) |
| { |
| fprintf (dump_file, "Trying transformations on stmt "); |
| print_gimple_stmt (dump_file, stmt, 0, TDF_SLIM); |
| dump_histograms_for_stmt (cfun, dump_file, stmt); |
| } |
| |
| /* Transformations: */ |
| /* The order of things in this conditional controls which |
| transformation is used when more than one is applicable. */ |
| /* It is expected that any code added by the transformations |
| will be added before the current statement, and that the |
| current statement remain valid (although possibly |
| modified) upon return. */ |
| if (gimple_mod_subtract_transform (&gsi) |
| || gimple_divmod_fixed_value_transform (&gsi) |
| || gimple_mod_pow2_value_transform (&gsi) |
| || gimple_stringops_transform (&gsi)) |
| { |
| stmt = gsi_stmt (gsi); |
| changed = true; |
| /* Original statement may no longer be in the same block. */ |
| if (bb != gimple_bb (stmt)) |
| { |
| bb = gimple_bb (stmt); |
| gsi = gsi_for_stmt (stmt); |
| } |
| } |
| |
| /* The function never thansforms a GIMPLE statement. */ |
| if (dump_enabled_p ()) |
| dump_ic_profile (&gsi); |
| } |
| } |
| |
| return changed; |
| } |
| |
| /* Generate code for transformation 1 (with parent gimple assignment |
| STMT and probability of taking the optimal path PROB, which is |
| equivalent to COUNT/ALL within roundoff error). This generates the |
| result into a temp and returns the temp; it does not replace or |
| alter the original STMT. */ |
| |
| static tree |
| gimple_divmod_fixed_value (gassign *stmt, tree value, profile_probability prob, |
| gcov_type count, gcov_type all) |
| { |
| gassign *stmt1, *stmt2; |
| gcond *stmt3; |
| tree tmp0, tmp1, tmp2; |
| gimple *bb1end, *bb2end, *bb3end; |
| basic_block bb, bb2, bb3, bb4; |
| tree optype, op1, op2; |
| edge e12, e13, e23, e24, e34; |
| gimple_stmt_iterator gsi; |
| |
| gcc_assert (is_gimple_assign (stmt) |
| && (gimple_assign_rhs_code (stmt) == TRUNC_DIV_EXPR |
| || gimple_assign_rhs_code (stmt) == TRUNC_MOD_EXPR)); |
| |
| optype = TREE_TYPE (gimple_assign_lhs (stmt)); |
| op1 = gimple_assign_rhs1 (stmt); |
| op2 = gimple_assign_rhs2 (stmt); |
| |
| bb = gimple_bb (stmt); |
| gsi = gsi_for_stmt (stmt); |
| |
| tmp0 = make_temp_ssa_name (optype, NULL, "PROF"); |
| tmp1 = make_temp_ssa_name (optype, NULL, "PROF"); |
| stmt1 = gimple_build_assign (tmp0, fold_convert (optype, value)); |
| stmt2 = gimple_build_assign (tmp1, op2); |
| stmt3 = gimple_build_cond (NE_EXPR, tmp1, tmp0, NULL_TREE, NULL_TREE); |
| gsi_insert_before (&gsi, stmt1, GSI_SAME_STMT); |
| gsi_insert_before (&gsi, stmt2, GSI_SAME_STMT); |
| gsi_insert_before (&gsi, stmt3, GSI_SAME_STMT); |
| bb1end = stmt3; |
| |
| tmp2 = create_tmp_reg (optype, "PROF"); |
| stmt1 = gimple_build_assign (tmp2, gimple_assign_rhs_code (stmt), op1, tmp0); |
| gsi_insert_before (&gsi, stmt1, GSI_SAME_STMT); |
| bb2end = stmt1; |
| |
| stmt1 = gimple_build_assign (tmp2, gimple_assign_rhs_code (stmt), op1, op2); |
| gsi_insert_before (&gsi, stmt1, GSI_SAME_STMT); |
| bb3end = stmt1; |
| |
| /* Fix CFG. */ |
| /* Edge e23 connects bb2 to bb3, etc. */ |
| e12 = split_block (bb, bb1end); |
| bb2 = e12->dest; |
| bb2->count = profile_count::from_gcov_type (count); |
| e23 = split_block (bb2, bb2end); |
| bb3 = e23->dest; |
| bb3->count = profile_count::from_gcov_type (all - count); |
| e34 = split_block (bb3, bb3end); |
| bb4 = e34->dest; |
| bb4->count = profile_count::from_gcov_type (all); |
| |
| e12->flags &= ~EDGE_FALLTHRU; |
| e12->flags |= EDGE_FALSE_VALUE; |
| e12->probability = prob; |
| |
| e13 = make_edge (bb, bb3, EDGE_TRUE_VALUE); |
| e13->probability = prob.invert (); |
| |
| remove_edge (e23); |
| |
| e24 = make_edge (bb2, bb4, EDGE_FALLTHRU); |
| e24->probability = profile_probability::always (); |
| |
| e34->probability = profile_probability::always (); |
| |
| return tmp2; |
| } |
| |
| /* Return the n-th value count of TOPN_VALUE histogram. If |
| there's a value, return true and set VALUE and COUNT |
| arguments. |
| |
| Counters have the following meaning. |
| |
| abs (counters[0]) is the number of executions |
| for i in 0 ... TOPN-1 |
| counters[2 * i + 2] is target |
| counters[2 * i + 3] is corresponding hitrate counter. |
| |
| Value of counters[0] negative when counter became |
| full during merging and some values are lost. */ |
| |
| bool |
| get_nth_most_common_value (gimple *stmt, const char *counter_type, |
| histogram_value hist, gcov_type *value, |
| gcov_type *count, gcov_type *all, unsigned n) |
| { |
| unsigned counters = hist->hvalue.counters[1]; |
| if (n >= counters) |
| return false; |
| |
| *count = 0; |
| *value = 0; |
| |
| gcov_type read_all = abs_hwi (hist->hvalue.counters[0]); |
| gcov_type covered = 0; |
| for (unsigned i = 0; i < counters; ++i) |
| covered += hist->hvalue.counters[2 * i + 3]; |
| |
| gcov_type v = hist->hvalue.counters[2 * n + 2]; |
| gcov_type c = hist->hvalue.counters[2 * n + 3]; |
| |
| if (hist->hvalue.counters[0] < 0 |
| && flag_profile_reproducible == PROFILE_REPRODUCIBILITY_PARALLEL_RUNS) |
| { |
| if (dump_file) |
| fprintf (dump_file, "Histogram value dropped in '%s' mode\n", |
| "-fprofile-reproducible=parallel-runs"); |
| return false; |
| } |
| else if (covered != read_all |
| && flag_profile_reproducible == PROFILE_REPRODUCIBILITY_MULTITHREADED) |
| { |
| if (dump_file) |
| fprintf (dump_file, "Histogram value dropped in '%s' mode\n", |
| "-fprofile-reproducible=multithreaded"); |
| return false; |
| } |
| |
| /* Indirect calls can't be verified. */ |
| if (stmt |
| && check_counter (stmt, counter_type, &c, &read_all, |
| gimple_bb (stmt)->count)) |
| return false; |
| |
| *all = read_all; |
| |
| *value = v; |
| *count = c; |
| return true; |
| } |
| |
| /* Do transform 1) on INSN if applicable. */ |
| |
| static bool |
| gimple_divmod_fixed_value_transform (gimple_stmt_iterator *si) |
| { |
| histogram_value histogram; |
| enum tree_code code; |
| gcov_type val, count, all; |
| tree result, value, tree_val; |
| profile_probability prob; |
| gassign *stmt; |
| |
| stmt = dyn_cast <gassign *> (gsi_stmt (*si)); |
| if (!stmt) |
| return false; |
| |
| if (!INTEGRAL_TYPE_P (TREE_TYPE (gimple_assign_lhs (stmt)))) |
| return false; |
| |
| code = gimple_assign_rhs_code (stmt); |
| |
| if (code != TRUNC_DIV_EXPR && code != TRUNC_MOD_EXPR) |
| return false; |
| |
| histogram = gimple_histogram_value_of_type (cfun, stmt, |
| HIST_TYPE_TOPN_VALUES); |
| if (!histogram) |
| return false; |
| |
| if (!get_nth_most_common_value (stmt, "divmod", histogram, &val, &count, |
| &all)) |
| return false; |
| |
| value = histogram->hvalue.value; |
| gimple_remove_histogram_value (cfun, stmt, histogram); |
| |
| /* We require that count is at least half of all. */ |
| if (simple_cst_equal (gimple_assign_rhs2 (stmt), value) != 1 |
| || 2 * count < all |
| || optimize_bb_for_size_p (gimple_bb (stmt))) |
| return false; |
| |
| /* Compute probability of taking the optimal path. */ |
| if (all > 0) |
| prob = profile_probability::probability_in_gcov_type (count, all); |
| else |
| prob = profile_probability::never (); |
| |
| if (sizeof (gcov_type) == sizeof (HOST_WIDE_INT)) |
| tree_val = build_int_cst (get_gcov_type (), val); |
| else |
| { |
| HOST_WIDE_INT a[2]; |
| a[0] = (unsigned HOST_WIDE_INT) val; |
| a[1] = val >> (HOST_BITS_PER_WIDE_INT - 1) >> 1; |
| |
| tree_val = wide_int_to_tree (get_gcov_type (), wide_int::from_array (a, 2, |
| TYPE_PRECISION (get_gcov_type ()), false)); |
| } |
| result = gimple_divmod_fixed_value (stmt, tree_val, prob, count, all); |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_OPTIMIZED_LOCATIONS, stmt, |
| "Transformation done: div/mod by constant %T\n", tree_val); |
| |
| gimple_assign_set_rhs_from_tree (si, result); |
| update_stmt (gsi_stmt (*si)); |
| |
| return true; |
| } |
| |
| /* Generate code for transformation 2 (with parent gimple assign STMT and |
| probability of taking the optimal path PROB, which is equivalent to COUNT/ALL |
| within roundoff error). This generates the result into a temp and returns |
| the temp; it does not replace or alter the original STMT. */ |
| |
| static tree |
| gimple_mod_pow2 (gassign *stmt, profile_probability prob, gcov_type count, gcov_type all) |
| { |
| gassign *stmt1, *stmt2, *stmt3; |
| gcond *stmt4; |
| tree tmp2, tmp3; |
| gimple *bb1end, *bb2end, *bb3end; |
| basic_block bb, bb2, bb3, bb4; |
| tree optype, op1, op2; |
| edge e12, e13, e23, e24, e34; |
| gimple_stmt_iterator gsi; |
| tree result; |
| |
| gcc_assert (is_gimple_assign (stmt) |
| && gimple_assign_rhs_code (stmt) == TRUNC_MOD_EXPR); |
| |
| optype = TREE_TYPE (gimple_assign_lhs (stmt)); |
| op1 = gimple_assign_rhs1 (stmt); |
| op2 = gimple_assign_rhs2 (stmt); |
| |
| bb = gimple_bb (stmt); |
| gsi = gsi_for_stmt (stmt); |
| |
| result = create_tmp_reg (optype, "PROF"); |
| tmp2 = make_temp_ssa_name (optype, NULL, "PROF"); |
| tmp3 = make_temp_ssa_name (optype, NULL, "PROF"); |
| stmt2 = gimple_build_assign (tmp2, PLUS_EXPR, op2, |
| build_int_cst (optype, -1)); |
| stmt3 = gimple_build_assign (tmp3, BIT_AND_EXPR, tmp2, op2); |
| stmt4 = gimple_build_cond (NE_EXPR, tmp3, build_int_cst (optype, 0), |
| NULL_TREE, NULL_TREE); |
| gsi_insert_before (&gsi, stmt2, GSI_SAME_STMT); |
| gsi_insert_before (&gsi, stmt3, GSI_SAME_STMT); |
| gsi_insert_before (&gsi, stmt4, GSI_SAME_STMT); |
| bb1end = stmt4; |
| |
| /* tmp2 == op2-1 inherited from previous block. */ |
| stmt1 = gimple_build_assign (result, BIT_AND_EXPR, op1, tmp2); |
| gsi_insert_before (&gsi, stmt1, GSI_SAME_STMT); |
| bb2end = stmt1; |
| |
| stmt1 = gimple_build_assign (result, gimple_assign_rhs_code (stmt), |
| op1, op2); |
| gsi_insert_before (&gsi, stmt1, GSI_SAME_STMT); |
| bb3end = stmt1; |
| |
| /* Fix CFG. */ |
| /* Edge e23 connects bb2 to bb3, etc. */ |
| e12 = split_block (bb, bb1end); |
| bb2 = e12->dest; |
| bb2->count = profile_count::from_gcov_type (count); |
| e23 = split_block (bb2, bb2end); |
| bb3 = e23->dest; |
| bb3->count = profile_count::from_gcov_type (all - count); |
| e34 = split_block (bb3, bb3end); |
| bb4 = e34->dest; |
| bb4->count = profile_count::from_gcov_type (all); |
| |
| e12->flags &= ~EDGE_FALLTHRU; |
| e12->flags |= EDGE_FALSE_VALUE; |
| e12->probability = prob; |
| |
| e13 = make_edge (bb, bb3, EDGE_TRUE_VALUE); |
| e13->probability = prob.invert (); |
| |
| remove_edge (e23); |
| |
| e24 = make_edge (bb2, bb4, EDGE_FALLTHRU); |
| e24->probability = profile_probability::always (); |
| |
| e34->probability = profile_probability::always (); |
| |
| return result; |
| } |
| |
| /* Do transform 2) on INSN if applicable. */ |
| |
| static bool |
| gimple_mod_pow2_value_transform (gimple_stmt_iterator *si) |
| { |
| histogram_value histogram; |
| enum tree_code code; |
| gcov_type count, wrong_values, all; |
| tree lhs_type, result, value; |
| profile_probability prob; |
| gassign *stmt; |
| |
| stmt = dyn_cast <gassign *> (gsi_stmt (*si)); |
| if (!stmt) |
| return false; |
| |
| lhs_type = TREE_TYPE (gimple_assign_lhs (stmt)); |
| if (!INTEGRAL_TYPE_P (lhs_type)) |
| return false; |
| |
| code = gimple_assign_rhs_code (stmt); |
| |
| if (code != TRUNC_MOD_EXPR || !TYPE_UNSIGNED (lhs_type)) |
| return false; |
| |
| histogram = gimple_histogram_value_of_type (cfun, stmt, HIST_TYPE_POW2); |
| if (!histogram) |
| return false; |
| |
| value = histogram->hvalue.value; |
| wrong_values = histogram->hvalue.counters[0]; |
| count = histogram->hvalue.counters[1]; |
| |
| gimple_remove_histogram_value (cfun, stmt, histogram); |
| |
| /* We require that we hit a power of 2 at least half of all evaluations. */ |
| if (simple_cst_equal (gimple_assign_rhs2 (stmt), value) != 1 |
| || count < wrong_values |
| || optimize_bb_for_size_p (gimple_bb (stmt))) |
| return false; |
| |
| /* Compute probability of taking the optimal path. */ |
| all = count + wrong_values; |
| |
| if (check_counter (stmt, "pow2", &count, &all, gimple_bb (stmt)->count)) |
| return false; |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_OPTIMIZED_LOCATIONS, stmt, |
| "Transformation done: mod power of 2\n"); |
| |
| if (all > 0) |
| prob = profile_probability::probability_in_gcov_type (count, all); |
| else |
| prob = profile_probability::never (); |
| |
| result = gimple_mod_pow2 (stmt, prob, count, all); |
| |
| gimple_assign_set_rhs_from_tree (si, result); |
| update_stmt (gsi_stmt (*si)); |
| |
| return true; |
| } |
| |
| /* Generate code for transformations 3 and 4 (with parent gimple assign STMT, and |
| NCOUNTS the number of cases to support. Currently only NCOUNTS==0 or 1 is |
| supported and this is built into this interface. The probabilities of taking |
| the optimal paths are PROB1 and PROB2, which are equivalent to COUNT1/ALL and |
| COUNT2/ALL respectively within roundoff error). This generates the |
| result into a temp and returns the temp; it does not replace or alter |
| the original STMT. */ |
| /* FIXME: Generalize the interface to handle NCOUNTS > 1. */ |
| |
| static tree |
| gimple_mod_subtract (gassign *stmt, profile_probability prob1, |
| profile_probability prob2, int ncounts, |
| gcov_type count1, gcov_type count2, gcov_type all) |
| { |
| gassign *stmt1; |
| gimple *stmt2; |
| gcond *stmt3; |
| tree tmp1; |
| gimple *bb1end, *bb2end = NULL, *bb3end; |
| basic_block bb, bb2, bb3, bb4; |
| tree optype, op1, op2; |
| edge e12, e23 = 0, e24, e34, e14; |
| gimple_stmt_iterator gsi; |
| tree result; |
| |
| gcc_assert (is_gimple_assign (stmt) |
| && gimple_assign_rhs_code (stmt) == TRUNC_MOD_EXPR); |
| |
| optype = TREE_TYPE (gimple_assign_lhs (stmt)); |
| op1 = gimple_assign_rhs1 (stmt); |
| op2 = gimple_assign_rhs2 (stmt); |
| |
| bb = gimple_bb (stmt); |
| gsi = gsi_for_stmt (stmt); |
| |
| result = create_tmp_reg (optype, "PROF"); |
| tmp1 = make_temp_ssa_name (optype, NULL, "PROF"); |
| stmt1 = gimple_build_assign (result, op1); |
| stmt2 = gimple_build_assign (tmp1, op2); |
| stmt3 = gimple_build_cond (LT_EXPR, result, tmp1, NULL_TREE, NULL_TREE); |
| gsi_insert_before (&gsi, stmt1, GSI_SAME_STMT); |
| gsi_insert_before (&gsi, stmt2, GSI_SAME_STMT); |
| gsi_insert_before (&gsi, stmt3, GSI_SAME_STMT); |
| bb1end = stmt3; |
| |
| if (ncounts) /* Assumed to be 0 or 1 */ |
| { |
| stmt1 = gimple_build_assign (result, MINUS_EXPR, result, tmp1); |
| stmt2 = gimple_build_cond (LT_EXPR, result, tmp1, NULL_TREE, NULL_TREE); |
| gsi_insert_before (&gsi, stmt1, GSI_SAME_STMT); |
| gsi_insert_before (&gsi, stmt2, GSI_SAME_STMT); |
| bb2end = stmt2; |
| } |
| |
| /* Fallback case. */ |
| stmt1 = gimple_build_assign (result, gimple_assign_rhs_code (stmt), |
| result, tmp1); |
| gsi_insert_before (&gsi, stmt1, GSI_SAME_STMT); |
| bb3end = stmt1; |
| |
| /* Fix CFG. */ |
| /* Edge e23 connects bb2 to bb3, etc. */ |
| /* However block 3 is optional; if it is not there, references |
| to 3 really refer to block 2. */ |
| e12 = split_block (bb, bb1end); |
| bb2 = e12->dest; |
| bb2->count = profile_count::from_gcov_type (all - count1); |
| |
| if (ncounts) /* Assumed to be 0 or 1. */ |
| { |
| e23 = split_block (bb2, bb2end); |
| bb3 = e23->dest; |
| bb3->count = profile_count::from_gcov_type (all - count1 - count2); |
| } |
| |
| e34 = split_block (ncounts ? bb3 : bb2, bb3end); |
| bb4 = e34->dest; |
| bb4->count = profile_count::from_gcov_type (all); |
| |
| e12->flags &= ~EDGE_FALLTHRU; |
| e12->flags |= EDGE_FALSE_VALUE; |
| e12->probability = prob1.invert (); |
| |
| e14 = make_edge (bb, bb4, EDGE_TRUE_VALUE); |
| e14->probability = prob1; |
| |
| if (ncounts) /* Assumed to be 0 or 1. */ |
| { |
| e23->flags &= ~EDGE_FALLTHRU; |
| e23->flags |= EDGE_FALSE_VALUE; |
| e23->probability = prob2.invert (); |
| |
| e24 = make_edge (bb2, bb4, EDGE_TRUE_VALUE); |
| e24->probability = prob2; |
| } |
| |
| e34->probability = profile_probability::always (); |
| |
| return result; |
| } |
| |
| /* Do transforms 3) and 4) on the statement pointed-to by SI if applicable. */ |
| |
| static bool |
| gimple_mod_subtract_transform (gimple_stmt_iterator *si) |
| { |
| histogram_value histogram; |
| enum tree_code code; |
| gcov_type count, wrong_values, all; |
| tree lhs_type, result; |
| profile_probability prob1, prob2; |
| unsigned int i, steps; |
| gcov_type count1, count2; |
| gassign *stmt; |
| stmt = dyn_cast <gassign *> (gsi_stmt (*si)); |
| if (!stmt) |
| return false; |
| |
| lhs_type = TREE_TYPE (gimple_assign_lhs (stmt)); |
| if (!INTEGRAL_TYPE_P (lhs_type)) |
| return false; |
| |
| code = gimple_assign_rhs_code (stmt); |
| |
| if (code != TRUNC_MOD_EXPR || !TYPE_UNSIGNED (lhs_type)) |
| return false; |
| |
| histogram = gimple_histogram_value_of_type (cfun, stmt, HIST_TYPE_INTERVAL); |
| if (!histogram) |
| return false; |
| |
| all = 0; |
| wrong_values = 0; |
| for (i = 0; i < histogram->hdata.intvl.steps; i++) |
| all += histogram->hvalue.counters[i]; |
| |
| wrong_values += histogram->hvalue.counters[i]; |
| wrong_values += histogram->hvalue.counters[i+1]; |
| steps = histogram->hdata.intvl.steps; |
| all += wrong_values; |
| count1 = histogram->hvalue.counters[0]; |
| count2 = histogram->hvalue.counters[1]; |
| |
| if (check_counter (stmt, "interval", &count1, &all, gimple_bb (stmt)->count)) |
| { |
| gimple_remove_histogram_value (cfun, stmt, histogram); |
| return false; |
| } |
| |
| if (flag_profile_correction && count1 + count2 > all) |
| all = count1 + count2; |
| |
| gcc_assert (count1 + count2 <= all); |
| |
| /* We require that we use just subtractions in at least 50% of all |
| evaluations. */ |
| count = 0; |
| for (i = 0; i < histogram->hdata.intvl.steps; i++) |
| { |
| count += histogram->hvalue.counters[i]; |
| if (count * 2 >= all) |
| break; |
| } |
| if (i == steps |
| || optimize_bb_for_size_p (gimple_bb (stmt))) |
| return false; |
| |
| gimple_remove_histogram_value (cfun, stmt, histogram); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_OPTIMIZED_LOCATIONS, stmt, |
| "Transformation done: mod subtract\n"); |
| |
| /* Compute probability of taking the optimal path(s). */ |
| if (all > 0) |
| { |
| prob1 = profile_probability::probability_in_gcov_type (count1, all); |
| if (all == count1) |
| prob2 = profile_probability::even (); |
| else |
| prob2 = profile_probability::probability_in_gcov_type (count2, all |
| - count1); |
| } |
| else |
| { |
| prob1 = prob2 = profile_probability::never (); |
| } |
| |
| /* In practice, "steps" is always 2. This interface reflects this, |
| and will need to be changed if "steps" can change. */ |
| result = gimple_mod_subtract (stmt, prob1, prob2, i, count1, count2, all); |
| |
| gimple_assign_set_rhs_from_tree (si, result); |
| update_stmt (gsi_stmt (*si)); |
| |
| return true; |
| } |
| |
| typedef int_hash <unsigned int, 0, UINT_MAX> profile_id_hash; |
| |
| static hash_map<profile_id_hash, cgraph_node *> *cgraph_node_map = 0; |
| |
| /* Returns true if node graph is initialized. This |
| is used to test if profile_id has been created |
| for cgraph_nodes. */ |
| |
| bool |
| coverage_node_map_initialized_p (void) |
| { |
| return cgraph_node_map != 0; |
| } |
| |
| /* Initialize map from PROFILE_ID to CGRAPH_NODE. |
| When LOCAL is true, the PROFILE_IDs are computed. when it is false we assume |
| that the PROFILE_IDs was already assigned. */ |
| |
| void |
| init_node_map (bool local) |
| { |
| struct cgraph_node *n; |
| cgraph_node_map = new hash_map<profile_id_hash, cgraph_node *>; |
| |
| FOR_EACH_DEFINED_FUNCTION (n) |
| if (n->has_gimple_body_p () || n->thunk) |
| { |
| cgraph_node **val; |
| dump_user_location_t loc |
| = dump_user_location_t::from_function_decl (n->decl); |
| if (local) |
| { |
| n->profile_id = coverage_compute_profile_id (n); |
| while ((val = cgraph_node_map->get (n->profile_id)) |
| || !n->profile_id) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, loc, |
| "Local profile-id %i conflict" |
| " with nodes %s %s\n", |
| n->profile_id, |
| n->dump_name (), |
| (*val)->dump_name ()); |
| n->profile_id = (n->profile_id + 1) & 0x7fffffff; |
| } |
| } |
| else if (!n->profile_id) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, loc, |
| "Node %s has no profile-id" |
| " (profile feedback missing?)\n", |
| n->dump_name ()); |
| continue; |
| } |
| else if ((val = cgraph_node_map->get (n->profile_id))) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, loc, |
| "Node %s has IP profile-id %i conflict. " |
| "Giving up.\n", |
| n->dump_name (), n->profile_id); |
| *val = NULL; |
| continue; |
| } |
| cgraph_node_map->put (n->profile_id, n); |
| } |
| } |
| |
| /* Delete the CGRAPH_NODE_MAP. */ |
| |
| void |
| del_node_map (void) |
| { |
| delete cgraph_node_map; |
| } |
| |
| /* Return cgraph node for function with pid */ |
| |
| struct cgraph_node* |
| find_func_by_profile_id (int profile_id) |
| { |
| cgraph_node **val = cgraph_node_map->get (profile_id); |
| if (val) |
| return *val; |
| else |
| return NULL; |
| } |
| |
| /* Do transformation |
| |
| if (actual_callee_address == address_of_most_common_function/method) |
| do direct call |
| else |
| old call |
| */ |
| |
| gcall * |
| gimple_ic (gcall *icall_stmt, struct cgraph_node *direct_call, |
| profile_probability prob) |
| { |
| gcall *dcall_stmt; |
| gassign *load_stmt; |
| gcond *cond_stmt; |
| tree tmp0, tmp1, tmp; |
| basic_block cond_bb, dcall_bb, icall_bb, join_bb = NULL; |
| edge e_cd, e_ci, e_di, e_dj = NULL, e_ij; |
| gimple_stmt_iterator gsi; |
| int lp_nr, dflags; |
| edge e_eh, e; |
| edge_iterator ei; |
| |
| cond_bb = gimple_bb (icall_stmt); |
| gsi = gsi_for_stmt (icall_stmt); |
| |
| tmp0 = make_temp_ssa_name (ptr_type_node, NULL, "PROF"); |
| tmp1 = make_temp_ssa_name (ptr_type_node, NULL, "PROF"); |
| tmp = unshare_expr (gimple_call_fn (icall_stmt)); |
| load_stmt = gimple_build_assign (tmp0, tmp); |
| gsi_insert_before (&gsi, load_stmt, GSI_SAME_STMT); |
| |
| tmp = fold_convert (ptr_type_node, build_addr (direct_call->decl)); |
| load_stmt = gimple_build_assign (tmp1, tmp); |
| gsi_insert_before (&gsi, load_stmt, GSI_SAME_STMT); |
| |
| cond_stmt = gimple_build_cond (EQ_EXPR, tmp1, tmp0, NULL_TREE, NULL_TREE); |
| gsi_insert_before (&gsi, cond_stmt, GSI_SAME_STMT); |
| |
| if (TREE_CODE (gimple_vdef (icall_stmt)) == SSA_NAME) |
| { |
| unlink_stmt_vdef (icall_stmt); |
| release_ssa_name (gimple_vdef (icall_stmt)); |
| } |
| gimple_set_vdef (icall_stmt, NULL_TREE); |
| gimple_set_vuse (icall_stmt, NULL_TREE); |
| update_stmt (icall_stmt); |
| dcall_stmt = as_a <gcall *> (gimple_copy (icall_stmt)); |
| gimple_call_set_fndecl (dcall_stmt, direct_call->decl); |
| dflags = flags_from_decl_or_type (direct_call->decl); |
| if ((dflags & ECF_NORETURN) != 0 |
| && should_remove_lhs_p (gimple_call_lhs (dcall_stmt))) |
| gimple_call_set_lhs (dcall_stmt, NULL_TREE); |
| gsi_insert_before (&gsi, dcall_stmt, GSI_SAME_STMT); |
| |
| /* Fix CFG. */ |
| /* Edge e_cd connects cond_bb to dcall_bb, etc; note the first letters. */ |
| e_cd = split_block (cond_bb, cond_stmt); |
| dcall_bb = e_cd->dest; |
| dcall_bb->count = cond_bb->count.apply_probability (prob); |
| |
| e_di = split_block (dcall_bb, dcall_stmt); |
| icall_bb = e_di->dest; |
| icall_bb->count = cond_bb->count - dcall_bb->count; |
| |
| /* Do not disturb existing EH edges from the indirect call. */ |
| if (!stmt_ends_bb_p (icall_stmt)) |
| e_ij = split_block (icall_bb, icall_stmt); |
| else |
| { |
| e_ij = find_fallthru_edge (icall_bb->succs); |
| /* The indirect call might be noreturn. */ |
| if (e_ij != NULL) |
| { |
| e_ij->probability = profile_probability::always (); |
| e_ij = single_pred_edge (split_edge (e_ij)); |
| } |
| } |
| if (e_ij != NULL) |
| { |
| join_bb = e_ij->dest; |
| join_bb->count = cond_bb->count; |
| } |
| |
| e_cd->flags = (e_cd->flags & ~EDGE_FALLTHRU) | EDGE_TRUE_VALUE; |
| e_cd->probability = prob; |
| |
| e_ci = make_edge (cond_bb, icall_bb, EDGE_FALSE_VALUE); |
| e_ci->probability = prob.invert (); |
| |
| remove_edge (e_di); |
| |
| if (e_ij != NULL) |
| { |
| if ((dflags & ECF_NORETURN) == 0) |
| { |
| e_dj = make_edge (dcall_bb, join_bb, EDGE_FALLTHRU); |
| e_dj->probability = profile_probability::always (); |
| } |
| e_ij->probability = profile_probability::always (); |
| } |
| |
| /* Insert PHI node for the call result if necessary. */ |
| if (gimple_call_lhs (icall_stmt) |
| && TREE_CODE (gimple_call_lhs (icall_stmt)) == SSA_NAME |
| && (dflags & ECF_NORETURN) == 0) |
| { |
| tree result = gimple_call_lhs (icall_stmt); |
| gphi *phi = create_phi_node (result, join_bb); |
| gimple_call_set_lhs (icall_stmt, |
| duplicate_ssa_name (result, icall_stmt)); |
| add_phi_arg (phi, gimple_call_lhs (icall_stmt), e_ij, UNKNOWN_LOCATION); |
| gimple_call_set_lhs (dcall_stmt, |
| duplicate_ssa_name (result, dcall_stmt)); |
| add_phi_arg (phi, gimple_call_lhs (dcall_stmt), e_dj, UNKNOWN_LOCATION); |
| } |
| |
| /* Build an EH edge for the direct call if necessary. */ |
| lp_nr = lookup_stmt_eh_lp (icall_stmt); |
| if (lp_nr > 0 && stmt_could_throw_p (cfun, dcall_stmt)) |
| { |
| add_stmt_to_eh_lp (dcall_stmt, lp_nr); |
| } |
| |
| FOR_EACH_EDGE (e_eh, ei, icall_bb->succs) |
| if (e_eh->flags & (EDGE_EH | EDGE_ABNORMAL)) |
| { |
| e = make_edge (dcall_bb, e_eh->dest, e_eh->flags); |
| e->probability = e_eh->probability; |
| for (gphi_iterator psi = gsi_start_phis (e_eh->dest); |
| !gsi_end_p (psi); gsi_next (&psi)) |
| { |
| gphi *phi = psi.phi (); |
| SET_USE (PHI_ARG_DEF_PTR_FROM_EDGE (phi, e), |
| PHI_ARG_DEF_FROM_EDGE (phi, e_eh)); |
| } |
| } |
| if (!stmt_could_throw_p (cfun, dcall_stmt)) |
| gimple_purge_dead_eh_edges (dcall_bb); |
| return dcall_stmt; |
| } |
| |
| /* Dump info about indirect call profile. */ |
| |
| static void |
| dump_ic_profile (gimple_stmt_iterator *gsi) |
| { |
| gcall *stmt; |
| histogram_value histogram; |
| gcov_type val, count, all; |
| struct cgraph_node *direct_call; |
| |
| stmt = dyn_cast <gcall *> (gsi_stmt (*gsi)); |
| if (!stmt) |
| return; |
| |
| if (gimple_call_fndecl (stmt) != NULL_TREE) |
| return; |
| |
| if (gimple_call_internal_p (stmt)) |
| return; |
| |
| histogram = gimple_histogram_value_of_type (cfun, stmt, HIST_TYPE_INDIR_CALL); |
| if (!histogram) |
| return; |
| |
| count = 0; |
| all = histogram->hvalue.counters[0]; |
| |
| for (unsigned j = 0; j < GCOV_TOPN_MAXIMUM_TRACKED_VALUES; j++) |
| { |
| if (!get_nth_most_common_value (NULL, "indirect call", histogram, &val, |
| &count, &all, j)) |
| return; |
| if (!count) |
| continue; |
| |
| direct_call = find_func_by_profile_id ((int) val); |
| |
| if (direct_call == NULL) |
| dump_printf_loc ( |
| MSG_MISSED_OPTIMIZATION, stmt, |
| "Indirect call -> direct call from other " |
| "module %T=> %i (will resolve by ipa-profile only with LTO)\n", |
| gimple_call_fn (stmt), (int) val); |
| else |
| dump_printf_loc (MSG_OPTIMIZED_LOCATIONS, stmt, |
| "Indirect call -> direct call " |
| "%T => %T (will resolve by ipa-profile)\n", |
| gimple_call_fn (stmt), direct_call->decl); |
| dump_printf_loc (MSG_NOTE, stmt, |
| "hist->count %" PRId64 " hist->all %" PRId64 "\n", |
| count, all); |
| } |
| } |
| |
| /* Return true if the stringop CALL shall be profiled. SIZE_ARG be |
| set to the argument index for the size of the string operation. */ |
| |
| static bool |
| interesting_stringop_to_profile_p (gcall *call, int *size_arg) |
| { |
| enum built_in_function fcode; |
| |
| fcode = DECL_FUNCTION_CODE (gimple_call_fndecl (call)); |
| switch (fcode) |
| { |
| case BUILT_IN_MEMCPY: |
| case BUILT_IN_MEMPCPY: |
| case BUILT_IN_MEMMOVE: |
| *size_arg = 2; |
| return validate_gimple_arglist (call, POINTER_TYPE, POINTER_TYPE, |
| INTEGER_TYPE, VOID_TYPE); |
| case BUILT_IN_MEMSET: |
| *size_arg = 2; |
| return validate_gimple_arglist (call, POINTER_TYPE, INTEGER_TYPE, |
| INTEGER_TYPE, VOID_TYPE); |
| case BUILT_IN_BZERO: |
| *size_arg = 1; |
| return validate_gimple_arglist (call, POINTER_TYPE, INTEGER_TYPE, |
| VOID_TYPE); |
| default: |
| return false; |
| } |
| } |
| |
| /* Convert stringop (..., vcall_size) |
| into |
| if (vcall_size == icall_size) |
| stringop (..., icall_size); |
| else |
| stringop (..., vcall_size); |
| assuming we'll propagate a true constant into ICALL_SIZE later. */ |
| |
| static void |
| gimple_stringop_fixed_value (gcall *vcall_stmt, tree icall_size, profile_probability prob, |
| gcov_type count, gcov_type all) |
| { |
| gassign *tmp_stmt; |
| gcond *cond_stmt; |
| gcall *icall_stmt; |
| tree tmp0, tmp1, vcall_size, optype; |
| basic_block cond_bb, icall_bb, vcall_bb, join_bb; |
| edge e_ci, e_cv, e_iv, e_ij, e_vj; |
| gimple_stmt_iterator gsi; |
| int size_arg; |
| |
| if (!interesting_stringop_to_profile_p (vcall_stmt, &size_arg)) |
| gcc_unreachable (); |
| |
| cond_bb = gimple_bb (vcall_stmt); |
| gsi = gsi_for_stmt (vcall_stmt); |
| |
| vcall_size = gimple_call_arg (vcall_stmt, size_arg); |
| optype = TREE_TYPE (vcall_size); |
| |
| tmp0 = make_temp_ssa_name (optype, NULL, "PROF"); |
| tmp1 = make_temp_ssa_name (optype, NULL, "PROF"); |
| tmp_stmt = gimple_build_assign (tmp0, fold_convert (optype, icall_size)); |
| gsi_insert_before (&gsi, tmp_stmt, GSI_SAME_STMT); |
| |
| tmp_stmt = gimple_build_assign (tmp1, vcall_size); |
| gsi_insert_before (&gsi, tmp_stmt, GSI_SAME_STMT); |
| |
| cond_stmt = gimple_build_cond (EQ_EXPR, tmp1, tmp0, NULL_TREE, NULL_TREE); |
| gsi_insert_before (&gsi, cond_stmt, GSI_SAME_STMT); |
| |
| if (TREE_CODE (gimple_vdef (vcall_stmt)) == SSA_NAME) |
| { |
| unlink_stmt_vdef (vcall_stmt); |
| release_ssa_name (gimple_vdef (vcall_stmt)); |
| } |
| gimple_set_vdef (vcall_stmt, NULL); |
| gimple_set_vuse (vcall_stmt, NULL); |
| update_stmt (vcall_stmt); |
| icall_stmt = as_a <gcall *> (gimple_copy (vcall_stmt)); |
| gimple_call_set_arg (icall_stmt, size_arg, |
| fold_convert (optype, icall_size)); |
| gsi_insert_before (&gsi, icall_stmt, GSI_SAME_STMT); |
| |
| /* Fix CFG. */ |
| /* Edge e_ci connects cond_bb to icall_bb, etc. */ |
| e_ci = split_block (cond_bb, cond_stmt); |
| icall_bb = e_ci->dest; |
| icall_bb->count = profile_count::from_gcov_type (count); |
| |
| e_iv = split_block (icall_bb, icall_stmt); |
| vcall_bb = e_iv->dest; |
| vcall_bb->count = profile_count::from_gcov_type (all - count); |
| |
| e_vj = split_block (vcall_bb, vcall_stmt); |
| join_bb = e_vj->dest; |
| join_bb->count = profile_count::from_gcov_type (all); |
| |
| e_ci->flags = (e_ci->flags & ~EDGE_FALLTHRU) | EDGE_TRUE_VALUE; |
| e_ci->probability = prob; |
| |
| e_cv = make_edge (cond_bb, vcall_bb, EDGE_FALSE_VALUE); |
| e_cv->probability = prob.invert (); |
| |
| remove_edge (e_iv); |
| |
| e_ij = make_edge (icall_bb, join_bb, EDGE_FALLTHRU); |
| e_ij->probability = profile_probability::always (); |
| |
| e_vj->probability = profile_probability::always (); |
| |
| /* Insert PHI node for the call result if necessary. */ |
| if (gimple_call_lhs (vcall_stmt) |
| && TREE_CODE (gimple_call_lhs (vcall_stmt)) == SSA_NAME) |
| { |
| tree result = gimple_call_lhs (vcall_stmt); |
| gphi *phi = create_phi_node (result, join_bb); |
| gimple_call_set_lhs (vcall_stmt, |
| duplicate_ssa_name (result, vcall_stmt)); |
| add_phi_arg (phi, gimple_call_lhs (vcall_stmt), e_vj, UNKNOWN_LOCATION); |
| gimple_call_set_lhs (icall_stmt, |
| duplicate_ssa_name (result, icall_stmt)); |
| add_phi_arg (phi, gimple_call_lhs (icall_stmt), e_ij, UNKNOWN_LOCATION); |
| } |
| |
| /* Because these are all string op builtins, they're all nothrow. */ |
| gcc_assert (!stmt_could_throw_p (cfun, vcall_stmt)); |
| gcc_assert (!stmt_could_throw_p (cfun, icall_stmt)); |
| } |
| |
| /* Find values inside STMT for that we want to measure histograms for |
| division/modulo optimization. */ |
| |
| static bool |
| gimple_stringops_transform (gimple_stmt_iterator *gsi) |
| { |
| gcall *stmt; |
| tree blck_size; |
| enum built_in_function fcode; |
| histogram_value histogram; |
| gcov_type count, all, val; |
| tree dest, src; |
| unsigned int dest_align, src_align; |
| profile_probability prob; |
| tree tree_val; |
| int size_arg; |
| |
| stmt = dyn_cast <gcall *> (gsi_stmt (*gsi)); |
| if (!stmt) |
| return false; |
| |
| if (!gimple_call_builtin_p (gsi_stmt (*gsi), BUILT_IN_NORMAL)) |
| return false; |
| |
| if (!interesting_stringop_to_profile_p (stmt, &size_arg)) |
| return false; |
| |
| blck_size = gimple_call_arg (stmt, size_arg); |
| if (TREE_CODE (blck_size) == INTEGER_CST) |
| return false; |
| |
| histogram = gimple_histogram_value_of_type (cfun, stmt, |
| HIST_TYPE_TOPN_VALUES); |
| if (!histogram) |
| return false; |
| |
| if (!get_nth_most_common_value (stmt, "stringops", histogram, &val, &count, |
| &all)) |
| return false; |
| |
| gimple_remove_histogram_value (cfun, stmt, histogram); |
| |
| /* We require that count is at least half of all. */ |
| if (2 * count < all || optimize_bb_for_size_p (gimple_bb (stmt))) |
| return false; |
| if (check_counter (stmt, "value", &count, &all, gimple_bb (stmt)->count)) |
| return false; |
| if (all > 0) |
| prob = profile_probability::probability_in_gcov_type (count, all); |
| else |
| prob = profile_probability::never (); |
| |
| dest = gimple_call_arg (stmt, 0); |
| dest_align = get_pointer_alignment (dest); |
| fcode = DECL_FUNCTION_CODE (gimple_call_fndecl (stmt)); |
| switch (fcode) |
| { |
| case BUILT_IN_MEMCPY: |
| case BUILT_IN_MEMPCPY: |
| case BUILT_IN_MEMMOVE: |
| src = gimple_call_arg (stmt, 1); |
| src_align = get_pointer_alignment (src); |
| if (!can_move_by_pieces (val, MIN (dest_align, src_align))) |
| return false; |
| break; |
| case BUILT_IN_MEMSET: |
| if (!can_store_by_pieces (val, builtin_memset_read_str, |
| gimple_call_arg (stmt, 1), |
| dest_align, true)) |
| return false; |
| break; |
| case BUILT_IN_BZERO: |
| if (!can_store_by_pieces (val, builtin_memset_read_str, |
| integer_zero_node, |
| dest_align, true)) |
| return false; |
| break; |
| default: |
| gcc_unreachable (); |
| } |
| |
| if (sizeof (gcov_type) == sizeof (HOST_WIDE_INT)) |
| tree_val = build_int_cst (get_gcov_type (), val); |
| else |
| { |
| HOST_WIDE_INT a[2]; |
| a[0] = (unsigned HOST_WIDE_INT) val; |
| a[1] = val >> (HOST_BITS_PER_WIDE_INT - 1) >> 1; |
| |
| tree_val = wide_int_to_tree (get_gcov_type (), wide_int::from_array (a, 2, |
| TYPE_PRECISION (get_gcov_type ()), false)); |
| } |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_OPTIMIZED_LOCATIONS, stmt, |
| "Transformation done: single value %i stringop for %s\n", |
| (int)val, built_in_names[(int)fcode]); |
| |
| gimple_stringop_fixed_value (stmt, tree_val, prob, count, all); |
| |
| return true; |
| } |
| |
| void |
| stringop_block_profile (gimple *stmt, unsigned int *expected_align, |
| HOST_WIDE_INT *expected_size) |
| { |
| histogram_value histogram; |
| histogram = gimple_histogram_value_of_type (cfun, stmt, HIST_TYPE_AVERAGE); |
| |
| if (!histogram) |
| *expected_size = -1; |
| else if (!histogram->hvalue.counters[1]) |
| { |
| *expected_size = -1; |
| gimple_remove_histogram_value (cfun, stmt, histogram); |
| } |
| else |
| { |
| gcov_type size; |
| size = ((histogram->hvalue.counters[0] |
| + histogram->hvalue.counters[1] / 2) |
| / histogram->hvalue.counters[1]); |
| /* Even if we can hold bigger value in SIZE, INT_MAX |
| is safe "infinity" for code generation strategies. */ |
| if (size > INT_MAX) |
| size = INT_MAX; |
| *expected_size = size; |
| gimple_remove_histogram_value (cfun, stmt, histogram); |
| } |
| |
| histogram = gimple_histogram_value_of_type (cfun, stmt, HIST_TYPE_IOR); |
| |
| if (!histogram) |
| *expected_align = 0; |
| else if (!histogram->hvalue.counters[0]) |
| { |
| gimple_remove_histogram_value (cfun, stmt, histogram); |
| *expected_align = 0; |
| } |
| else |
| { |
| gcov_type count; |
| unsigned int alignment; |
| |
| count = histogram->hvalue.counters[0]; |
| alignment = 1; |
| while (!(count & alignment) |
| && (alignment <= UINT_MAX / 2 / BITS_PER_UNIT)) |
| alignment <<= 1; |
| *expected_align = alignment * BITS_PER_UNIT; |
| gimple_remove_histogram_value (cfun, stmt, histogram); |
| } |
| } |
| |
| |
| /* Find values inside STMT for that we want to measure histograms for |
| division/modulo optimization. */ |
| |
| static void |
| gimple_divmod_values_to_profile (gimple *stmt, histogram_values *values) |
| { |
| tree lhs, divisor, op0, type; |
| histogram_value hist; |
| |
| if (gimple_code (stmt) != GIMPLE_ASSIGN) |
| return; |
| |
| lhs = gimple_assign_lhs (stmt); |
| type = TREE_TYPE (lhs); |
| if (!INTEGRAL_TYPE_P (type)) |
| return; |
| |
| switch (gimple_assign_rhs_code (stmt)) |
| { |
| case TRUNC_DIV_EXPR: |
| case TRUNC_MOD_EXPR: |
| divisor = gimple_assign_rhs2 (stmt); |
| op0 = gimple_assign_rhs1 (stmt); |
| |
| if (TREE_CODE (divisor) == SSA_NAME) |
| /* Check for the case where the divisor is the same value most |
| of the time. */ |
| values->safe_push (gimple_alloc_histogram_value (cfun, |
| HIST_TYPE_TOPN_VALUES, |
| stmt, divisor)); |
| |
| /* For mod, check whether it is not often a noop (or replaceable by |
| a few subtractions). */ |
| if (gimple_assign_rhs_code (stmt) == TRUNC_MOD_EXPR |
| && TYPE_UNSIGNED (type) |
| && TREE_CODE (divisor) == SSA_NAME) |
| { |
| tree val; |
| /* Check for a special case where the divisor is power of 2. */ |
| values->safe_push (gimple_alloc_histogram_value (cfun, |
| HIST_TYPE_POW2, |
| stmt, divisor)); |
| val = build2 (TRUNC_DIV_EXPR, type, op0, divisor); |
| hist = gimple_alloc_histogram_value (cfun, HIST_TYPE_INTERVAL, |
| stmt, val); |
| hist->hdata.intvl.int_start = 0; |
| hist->hdata.intvl.steps = 2; |
| values->safe_push (hist); |
| } |
| return; |
| |
| default: |
| return; |
| } |
| } |
| |
| /* Find calls inside STMT for that we want to measure histograms for |
| indirect/virtual call optimization. */ |
| |
| static void |
| gimple_indirect_call_to_profile (gimple *stmt, histogram_values *values) |
| { |
| tree callee; |
| |
| if (gimple_code (stmt) != GIMPLE_CALL |
| || gimple_call_internal_p (stmt) |
| || gimple_call_fndecl (stmt) != NULL_TREE) |
| return; |
| |
| callee = gimple_call_fn (stmt); |
| histogram_value v = gimple_alloc_histogram_value (cfun, HIST_TYPE_INDIR_CALL, |
| stmt, callee); |
| values->safe_push (v); |
| |
| return; |
| } |
| |
| /* Find values inside STMT for that we want to measure histograms for |
| string operations. */ |
| |
| static void |
| gimple_stringops_values_to_profile (gimple *gs, histogram_values *values) |
| { |
| gcall *stmt; |
| tree blck_size; |
| tree dest; |
| int size_arg; |
| |
| stmt = dyn_cast <gcall *> (gs); |
| if (!stmt) |
| return; |
| |
| if (!gimple_call_builtin_p (gs, BUILT_IN_NORMAL)) |
| return; |
| |
| if (!interesting_stringop_to_profile_p (stmt, &size_arg)) |
| return; |
| |
| dest = gimple_call_arg (stmt, 0); |
| blck_size = gimple_call_arg (stmt, size_arg); |
| |
| if (TREE_CODE (blck_size) != INTEGER_CST) |
| { |
| values->safe_push (gimple_alloc_histogram_value (cfun, |
| HIST_TYPE_TOPN_VALUES, |
| stmt, blck_size)); |
| values->safe_push (gimple_alloc_histogram_value (cfun, HIST_TYPE_AVERAGE, |
| stmt, blck_size)); |
| } |
| |
| if (TREE_CODE (blck_size) != INTEGER_CST) |
| values->safe_push (gimple_alloc_histogram_value (cfun, HIST_TYPE_IOR, |
| stmt, dest)); |
| } |
| |
| /* Find values inside STMT for that we want to measure histograms and adds |
| them to list VALUES. */ |
| |
| static void |
| gimple_values_to_profile (gimple *stmt, histogram_values *values) |
| { |
| gimple_divmod_values_to_profile (stmt, values); |
| gimple_stringops_values_to_profile (stmt, values); |
| gimple_indirect_call_to_profile (stmt, values); |
| } |
| |
| void |
| gimple_find_values_to_profile (histogram_values *values) |
| { |
| basic_block bb; |
| gimple_stmt_iterator gsi; |
| unsigned i; |
| histogram_value hist = NULL; |
| values->create (0); |
| |
| FOR_EACH_BB_FN (bb, cfun) |
| for (gsi = gsi_start_bb (bb); !gsi_end_p (gsi); gsi_next (&gsi)) |
| gimple_values_to_profile (gsi_stmt (gsi), values); |
| |
| values->safe_push (gimple_alloc_histogram_value (cfun, |
| HIST_TYPE_TIME_PROFILE)); |
| |
| FOR_EACH_VEC_ELT (*values, i, hist) |
| { |
| switch (hist->type) |
| { |
| case HIST_TYPE_INTERVAL: |
| hist->n_counters = hist->hdata.intvl.steps + 2; |
| break; |
| |
| case HIST_TYPE_POW2: |
| hist->n_counters = 2; |
| break; |
| |
| case HIST_TYPE_TOPN_VALUES: |
| case HIST_TYPE_INDIR_CALL: |
| hist->n_counters = GCOV_TOPN_MEM_COUNTERS; |
| break; |
| |
| case HIST_TYPE_TIME_PROFILE: |
| hist->n_counters = 1; |
| break; |
| |
| case HIST_TYPE_AVERAGE: |
| hist->n_counters = 2; |
| break; |
| |
| case HIST_TYPE_IOR: |
| hist->n_counters = 1; |
| break; |
| |
| default: |
| gcc_unreachable (); |
| } |
| if (dump_file && hist->hvalue.stmt != NULL) |
| { |
| fprintf (dump_file, "Stmt "); |
| print_gimple_stmt (dump_file, hist->hvalue.stmt, 0, TDF_SLIM); |
| dump_histogram_value (dump_file, hist); |
| } |
| } |
| } |