| /* Inlining decision heuristics. |
| Copyright (C) 2003-2021 Free Software Foundation, Inc. |
| Contributed by Jan Hubicka |
| |
| This file is part of GCC. |
| |
| GCC is free software; you can redistribute it and/or modify it under |
| the terms of the GNU General Public License as published by the Free |
| Software Foundation; either version 3, or (at your option) any later |
| version. |
| |
| GCC is distributed in the hope that it will be useful, but WITHOUT ANY |
| WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with GCC; see the file COPYING3. If not see |
| <http://www.gnu.org/licenses/>. */ |
| |
| /* Inlining decision heuristics |
| |
| The implementation of inliner is organized as follows: |
| |
| inlining heuristics limits |
| |
| can_inline_edge_p allow to check that particular inlining is allowed |
| by the limits specified by user (allowed function growth, growth and so |
| on). |
| |
| Functions are inlined when it is obvious the result is profitable (such |
| as functions called once or when inlining reduce code size). |
| In addition to that we perform inlining of small functions and recursive |
| inlining. |
| |
| inlining heuristics |
| |
| The inliner itself is split into two passes: |
| |
| pass_early_inlining |
| |
| Simple local inlining pass inlining callees into current function. |
| This pass makes no use of whole unit analysis and thus it can do only |
| very simple decisions based on local properties. |
| |
| The strength of the pass is that it is run in topological order |
| (reverse postorder) on the callgraph. Functions are converted into SSA |
| form just before this pass and optimized subsequently. As a result, the |
| callees of the function seen by the early inliner was already optimized |
| and results of early inlining adds a lot of optimization opportunities |
| for the local optimization. |
| |
| The pass handle the obvious inlining decisions within the compilation |
| unit - inlining auto inline functions, inlining for size and |
| flattening. |
| |
| main strength of the pass is the ability to eliminate abstraction |
| penalty in C++ code (via combination of inlining and early |
| optimization) and thus improve quality of analysis done by real IPA |
| optimizers. |
| |
| Because of lack of whole unit knowledge, the pass cannot really make |
| good code size/performance tradeoffs. It however does very simple |
| speculative inlining allowing code size to grow by |
| EARLY_INLINING_INSNS when callee is leaf function. In this case the |
| optimizations performed later are very likely to eliminate the cost. |
| |
| pass_ipa_inline |
| |
| This is the real inliner able to handle inlining with whole program |
| knowledge. It performs following steps: |
| |
| 1) inlining of small functions. This is implemented by greedy |
| algorithm ordering all inlinable cgraph edges by their badness and |
| inlining them in this order as long as inline limits allows doing so. |
| |
| This heuristics is not very good on inlining recursive calls. Recursive |
| calls can be inlined with results similar to loop unrolling. To do so, |
| special purpose recursive inliner is executed on function when |
| recursive edge is met as viable candidate. |
| |
| 2) Unreachable functions are removed from callgraph. Inlining leads |
| to devirtualization and other modification of callgraph so functions |
| may become unreachable during the process. Also functions declared as |
| extern inline or virtual functions are removed, since after inlining |
| we no longer need the offline bodies. |
| |
| 3) Functions called once and not exported from the unit are inlined. |
| This should almost always lead to reduction of code size by eliminating |
| the need for offline copy of the function. */ |
| |
| #include "config.h" |
| #include "system.h" |
| #include "coretypes.h" |
| #include "backend.h" |
| #include "target.h" |
| #include "rtl.h" |
| #include "tree.h" |
| #include "gimple.h" |
| #include "alloc-pool.h" |
| #include "tree-pass.h" |
| #include "gimple-ssa.h" |
| #include "cgraph.h" |
| #include "lto-streamer.h" |
| #include "trans-mem.h" |
| #include "calls.h" |
| #include "tree-inline.h" |
| #include "profile.h" |
| #include "symbol-summary.h" |
| #include "tree-vrp.h" |
| #include "ipa-prop.h" |
| #include "ipa-fnsummary.h" |
| #include "ipa-inline.h" |
| #include "ipa-utils.h" |
| #include "sreal.h" |
| #include "auto-profile.h" |
| #include "builtins.h" |
| #include "fibonacci_heap.h" |
| #include "stringpool.h" |
| #include "attribs.h" |
| #include "asan.h" |
| |
| typedef fibonacci_heap <sreal, cgraph_edge> edge_heap_t; |
| typedef fibonacci_node <sreal, cgraph_edge> edge_heap_node_t; |
| |
| /* Statistics we collect about inlining algorithm. */ |
| static int overall_size; |
| static profile_count max_count; |
| static profile_count spec_rem; |
| |
| /* Return false when inlining edge E would lead to violating |
| limits on function unit growth or stack usage growth. |
| |
| The relative function body growth limit is present generally |
| to avoid problems with non-linear behavior of the compiler. |
| To allow inlining huge functions into tiny wrapper, the limit |
| is always based on the bigger of the two functions considered. |
| |
| For stack growth limits we always base the growth in stack usage |
| of the callers. We want to prevent applications from segfaulting |
| on stack overflow when functions with huge stack frames gets |
| inlined. */ |
| |
| static bool |
| caller_growth_limits (struct cgraph_edge *e) |
| { |
| struct cgraph_node *to = e->caller; |
| struct cgraph_node *what = e->callee->ultimate_alias_target (); |
| int newsize; |
| int limit = 0; |
| HOST_WIDE_INT stack_size_limit = 0, inlined_stack; |
| ipa_size_summary *outer_info = ipa_size_summaries->get (to); |
| |
| /* Look for function e->caller is inlined to. While doing |
| so work out the largest function body on the way. As |
| described above, we want to base our function growth |
| limits based on that. Not on the self size of the |
| outer function, not on the self size of inline code |
| we immediately inline to. This is the most relaxed |
| interpretation of the rule "do not grow large functions |
| too much in order to prevent compiler from exploding". */ |
| while (true) |
| { |
| ipa_size_summary *size_info = ipa_size_summaries->get (to); |
| if (limit < size_info->self_size) |
| limit = size_info->self_size; |
| if (stack_size_limit < size_info->estimated_self_stack_size) |
| stack_size_limit = size_info->estimated_self_stack_size; |
| if (to->inlined_to) |
| to = to->callers->caller; |
| else |
| break; |
| } |
| |
| ipa_fn_summary *what_info = ipa_fn_summaries->get (what); |
| ipa_size_summary *what_size_info = ipa_size_summaries->get (what); |
| |
| if (limit < what_size_info->self_size) |
| limit = what_size_info->self_size; |
| |
| limit += limit * opt_for_fn (to->decl, param_large_function_growth) / 100; |
| |
| /* Check the size after inlining against the function limits. But allow |
| the function to shrink if it went over the limits by forced inlining. */ |
| newsize = estimate_size_after_inlining (to, e); |
| if (newsize >= ipa_size_summaries->get (what)->size |
| && newsize > opt_for_fn (to->decl, param_large_function_insns) |
| && newsize > limit) |
| { |
| e->inline_failed = CIF_LARGE_FUNCTION_GROWTH_LIMIT; |
| return false; |
| } |
| |
| if (!what_info->estimated_stack_size) |
| return true; |
| |
| /* FIXME: Stack size limit often prevents inlining in Fortran programs |
| due to large i/o datastructures used by the Fortran front-end. |
| We ought to ignore this limit when we know that the edge is executed |
| on every invocation of the caller (i.e. its call statement dominates |
| exit block). We do not track this information, yet. */ |
| stack_size_limit += ((gcov_type)stack_size_limit |
| * opt_for_fn (to->decl, param_stack_frame_growth) |
| / 100); |
| |
| inlined_stack = (ipa_get_stack_frame_offset (to) |
| + outer_info->estimated_self_stack_size |
| + what_info->estimated_stack_size); |
| /* Check new stack consumption with stack consumption at the place |
| stack is used. */ |
| if (inlined_stack > stack_size_limit |
| /* If function already has large stack usage from sibling |
| inline call, we can inline, too. |
| This bit overoptimistically assume that we are good at stack |
| packing. */ |
| && inlined_stack > ipa_fn_summaries->get (to)->estimated_stack_size |
| && inlined_stack > opt_for_fn (to->decl, param_large_stack_frame)) |
| { |
| e->inline_failed = CIF_LARGE_STACK_FRAME_GROWTH_LIMIT; |
| return false; |
| } |
| return true; |
| } |
| |
| /* Dump info about why inlining has failed. */ |
| |
| static void |
| report_inline_failed_reason (struct cgraph_edge *e) |
| { |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, e->call_stmt, |
| " not inlinable: %C -> %C, %s\n", |
| e->caller, e->callee, |
| cgraph_inline_failed_string (e->inline_failed)); |
| if ((e->inline_failed == CIF_TARGET_OPTION_MISMATCH |
| || e->inline_failed == CIF_OPTIMIZATION_MISMATCH) |
| && e->caller->lto_file_data |
| && e->callee->ultimate_alias_target ()->lto_file_data) |
| { |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, e->call_stmt, |
| " LTO objects: %s, %s\n", |
| e->caller->lto_file_data->file_name, |
| e->callee->ultimate_alias_target ()->lto_file_data->file_name); |
| } |
| if (e->inline_failed == CIF_TARGET_OPTION_MISMATCH) |
| if (dump_file) |
| cl_target_option_print_diff |
| (dump_file, 2, target_opts_for_fn (e->caller->decl), |
| target_opts_for_fn (e->callee->ultimate_alias_target ()->decl)); |
| if (e->inline_failed == CIF_OPTIMIZATION_MISMATCH) |
| if (dump_file) |
| cl_optimization_print_diff |
| (dump_file, 2, opts_for_fn (e->caller->decl), |
| opts_for_fn (e->callee->ultimate_alias_target ()->decl)); |
| } |
| } |
| |
| /* Decide whether sanitizer-related attributes allow inlining. */ |
| |
| static bool |
| sanitize_attrs_match_for_inline_p (const_tree caller, const_tree callee) |
| { |
| if (!caller || !callee) |
| return true; |
| |
| /* Follow clang and allow inlining for always_inline functions. */ |
| if (lookup_attribute ("always_inline", DECL_ATTRIBUTES (callee))) |
| return true; |
| |
| const sanitize_code codes[] = |
| { |
| SANITIZE_ADDRESS, |
| SANITIZE_THREAD, |
| SANITIZE_UNDEFINED, |
| SANITIZE_UNDEFINED_NONDEFAULT, |
| SANITIZE_POINTER_COMPARE, |
| SANITIZE_POINTER_SUBTRACT |
| }; |
| |
| for (unsigned i = 0; i < sizeof (codes) / sizeof (codes[0]); i++) |
| if (sanitize_flags_p (codes[i], caller) |
| != sanitize_flags_p (codes[i], callee)) |
| return false; |
| |
| return true; |
| } |
| |
| /* Used for flags where it is safe to inline when caller's value is |
| grater than callee's. */ |
| #define check_maybe_up(flag) \ |
| (opts_for_fn (caller->decl)->x_##flag \ |
| != opts_for_fn (callee->decl)->x_##flag \ |
| && (!always_inline \ |
| || opts_for_fn (caller->decl)->x_##flag \ |
| < opts_for_fn (callee->decl)->x_##flag)) |
| /* Used for flags where it is safe to inline when caller's value is |
| smaller than callee's. */ |
| #define check_maybe_down(flag) \ |
| (opts_for_fn (caller->decl)->x_##flag \ |
| != opts_for_fn (callee->decl)->x_##flag \ |
| && (!always_inline \ |
| || opts_for_fn (caller->decl)->x_##flag \ |
| > opts_for_fn (callee->decl)->x_##flag)) |
| /* Used for flags where exact match is needed for correctness. */ |
| #define check_match(flag) \ |
| (opts_for_fn (caller->decl)->x_##flag \ |
| != opts_for_fn (callee->decl)->x_##flag) |
| |
| /* Decide if we can inline the edge and possibly update |
| inline_failed reason. |
| We check whether inlining is possible at all and whether |
| caller growth limits allow doing so. |
| |
| if REPORT is true, output reason to the dump file. */ |
| |
| static bool |
| can_inline_edge_p (struct cgraph_edge *e, bool report, |
| bool early = false) |
| { |
| gcc_checking_assert (e->inline_failed); |
| |
| if (cgraph_inline_failed_type (e->inline_failed) == CIF_FINAL_ERROR) |
| { |
| if (report) |
| report_inline_failed_reason (e); |
| return false; |
| } |
| |
| bool inlinable = true; |
| enum availability avail; |
| cgraph_node *caller = (e->caller->inlined_to |
| ? e->caller->inlined_to : e->caller); |
| cgraph_node *callee = e->callee->ultimate_alias_target (&avail, caller); |
| |
| if (!callee->definition) |
| { |
| e->inline_failed = CIF_BODY_NOT_AVAILABLE; |
| inlinable = false; |
| } |
| if (!early && (!opt_for_fn (callee->decl, optimize) |
| || !opt_for_fn (caller->decl, optimize))) |
| { |
| e->inline_failed = CIF_FUNCTION_NOT_OPTIMIZED; |
| inlinable = false; |
| } |
| else if (callee->calls_comdat_local) |
| { |
| e->inline_failed = CIF_USES_COMDAT_LOCAL; |
| inlinable = false; |
| } |
| else if (avail <= AVAIL_INTERPOSABLE) |
| { |
| e->inline_failed = CIF_OVERWRITABLE; |
| inlinable = false; |
| } |
| /* All edges with call_stmt_cannot_inline_p should have inline_failed |
| initialized to one of FINAL_ERROR reasons. */ |
| else if (e->call_stmt_cannot_inline_p) |
| gcc_unreachable (); |
| /* Don't inline if the functions have different EH personalities. */ |
| else if (DECL_FUNCTION_PERSONALITY (caller->decl) |
| && DECL_FUNCTION_PERSONALITY (callee->decl) |
| && (DECL_FUNCTION_PERSONALITY (caller->decl) |
| != DECL_FUNCTION_PERSONALITY (callee->decl))) |
| { |
| e->inline_failed = CIF_EH_PERSONALITY; |
| inlinable = false; |
| } |
| /* TM pure functions should not be inlined into non-TM_pure |
| functions. */ |
| else if (is_tm_pure (callee->decl) && !is_tm_pure (caller->decl)) |
| { |
| e->inline_failed = CIF_UNSPECIFIED; |
| inlinable = false; |
| } |
| /* Check compatibility of target optimization options. */ |
| else if (!targetm.target_option.can_inline_p (caller->decl, |
| callee->decl)) |
| { |
| e->inline_failed = CIF_TARGET_OPTION_MISMATCH; |
| inlinable = false; |
| } |
| else if (ipa_fn_summaries->get (callee) == NULL |
| || !ipa_fn_summaries->get (callee)->inlinable) |
| { |
| e->inline_failed = CIF_FUNCTION_NOT_INLINABLE; |
| inlinable = false; |
| } |
| /* Don't inline a function with mismatched sanitization attributes. */ |
| else if (!sanitize_attrs_match_for_inline_p (caller->decl, callee->decl)) |
| { |
| e->inline_failed = CIF_SANITIZE_ATTRIBUTE_MISMATCH; |
| inlinable = false; |
| } |
| if (!inlinable && report) |
| report_inline_failed_reason (e); |
| return inlinable; |
| } |
| |
| /* Return inlining_insns_single limit for function N. If HINT or HINT2 is true |
| scale up the bound. */ |
| |
| static int |
| inline_insns_single (cgraph_node *n, bool hint, bool hint2) |
| { |
| if (hint && hint2) |
| { |
| int64_t spd = opt_for_fn (n->decl, param_inline_heuristics_hint_percent); |
| spd = spd * spd; |
| if (spd > 1000000) |
| spd = 1000000; |
| return opt_for_fn (n->decl, param_max_inline_insns_single) * spd / 100; |
| } |
| if (hint || hint2) |
| return opt_for_fn (n->decl, param_max_inline_insns_single) |
| * opt_for_fn (n->decl, param_inline_heuristics_hint_percent) / 100; |
| return opt_for_fn (n->decl, param_max_inline_insns_single); |
| } |
| |
| /* Return inlining_insns_auto limit for function N. If HINT or HINT2 is true |
| scale up the bound. */ |
| |
| static int |
| inline_insns_auto (cgraph_node *n, bool hint, bool hint2) |
| { |
| int max_inline_insns_auto = opt_for_fn (n->decl, param_max_inline_insns_auto); |
| if (hint && hint2) |
| { |
| int64_t spd = opt_for_fn (n->decl, param_inline_heuristics_hint_percent); |
| spd = spd * spd; |
| if (spd > 1000000) |
| spd = 1000000; |
| return max_inline_insns_auto * spd / 100; |
| } |
| if (hint || hint2) |
| return max_inline_insns_auto |
| * opt_for_fn (n->decl, param_inline_heuristics_hint_percent) / 100; |
| return max_inline_insns_auto; |
| } |
| |
| /* Decide if we can inline the edge and possibly update |
| inline_failed reason. |
| We check whether inlining is possible at all and whether |
| caller growth limits allow doing so. |
| |
| if REPORT is true, output reason to the dump file. |
| |
| if DISREGARD_LIMITS is true, ignore size limits. */ |
| |
| static bool |
| can_inline_edge_by_limits_p (struct cgraph_edge *e, bool report, |
| bool disregard_limits = false, bool early = false) |
| { |
| gcc_checking_assert (e->inline_failed); |
| |
| if (cgraph_inline_failed_type (e->inline_failed) == CIF_FINAL_ERROR) |
| { |
| if (report) |
| report_inline_failed_reason (e); |
| return false; |
| } |
| |
| bool inlinable = true; |
| enum availability avail; |
| cgraph_node *caller = (e->caller->inlined_to |
| ? e->caller->inlined_to : e->caller); |
| cgraph_node *callee = e->callee->ultimate_alias_target (&avail, caller); |
| tree caller_tree = DECL_FUNCTION_SPECIFIC_OPTIMIZATION (caller->decl); |
| tree callee_tree |
| = callee ? DECL_FUNCTION_SPECIFIC_OPTIMIZATION (callee->decl) : NULL; |
| /* Check if caller growth allows the inlining. */ |
| if (!DECL_DISREGARD_INLINE_LIMITS (callee->decl) |
| && !disregard_limits |
| && !lookup_attribute ("flatten", |
| DECL_ATTRIBUTES (caller->decl)) |
| && !caller_growth_limits (e)) |
| inlinable = false; |
| else if (callee->externally_visible |
| && !DECL_DISREGARD_INLINE_LIMITS (callee->decl) |
| && flag_live_patching == LIVE_PATCHING_INLINE_ONLY_STATIC) |
| { |
| e->inline_failed = CIF_EXTERN_LIVE_ONLY_STATIC; |
| inlinable = false; |
| } |
| /* Don't inline a function with a higher optimization level than the |
| caller. FIXME: this is really just tip of iceberg of handling |
| optimization attribute. */ |
| else if (caller_tree != callee_tree) |
| { |
| bool always_inline = |
| (DECL_DISREGARD_INLINE_LIMITS (callee->decl) |
| && lookup_attribute ("always_inline", |
| DECL_ATTRIBUTES (callee->decl))); |
| ipa_fn_summary *caller_info = ipa_fn_summaries->get (caller); |
| ipa_fn_summary *callee_info = ipa_fn_summaries->get (callee); |
| |
| /* Until GCC 4.9 we did not check the semantics-altering flags |
| below and inlined across optimization boundaries. |
| Enabling checks below breaks several packages by refusing |
| to inline library always_inline functions. See PR65873. |
| Disable the check for early inlining for now until better solution |
| is found. */ |
| if (always_inline && early) |
| ; |
| /* There are some options that change IL semantics which means |
| we cannot inline in these cases for correctness reason. |
| Not even for always_inline declared functions. */ |
| else if (check_match (flag_wrapv) |
| || check_match (flag_trapv) |
| || check_match (flag_pcc_struct_return) |
| || check_maybe_down (optimize_debug) |
| /* When caller or callee does FP math, be sure FP codegen flags |
| compatible. */ |
| || ((caller_info->fp_expressions && callee_info->fp_expressions) |
| && (check_maybe_up (flag_rounding_math) |
| || check_maybe_up (flag_trapping_math) |
| || check_maybe_down (flag_unsafe_math_optimizations) |
| || check_maybe_down (flag_finite_math_only) |
| || check_maybe_up (flag_signaling_nans) |
| || check_maybe_down (flag_cx_limited_range) |
| || check_maybe_up (flag_signed_zeros) |
| || check_maybe_down (flag_associative_math) |
| || check_maybe_down (flag_reciprocal_math) |
| || check_maybe_down (flag_fp_int_builtin_inexact) |
| /* Strictly speaking only when the callee contains function |
| calls that may end up setting errno. */ |
| || check_maybe_up (flag_errno_math))) |
| /* We do not want to make code compiled with exceptions to be |
| brought into a non-EH function unless we know that the callee |
| does not throw. |
| This is tracked by DECL_FUNCTION_PERSONALITY. */ |
| || (check_maybe_up (flag_non_call_exceptions) |
| && DECL_FUNCTION_PERSONALITY (callee->decl)) |
| || (check_maybe_up (flag_exceptions) |
| && DECL_FUNCTION_PERSONALITY (callee->decl)) |
| /* When devirtualization is disabled for callee, it is not safe |
| to inline it as we possibly mangled the type info. |
| Allow early inlining of always inlines. */ |
| || (!early && check_maybe_down (flag_devirtualize))) |
| { |
| e->inline_failed = CIF_OPTIMIZATION_MISMATCH; |
| inlinable = false; |
| } |
| /* gcc.dg/pr43564.c. Apply user-forced inline even at -O0. */ |
| else if (always_inline) |
| ; |
| /* When user added an attribute to the callee honor it. */ |
| else if (lookup_attribute ("optimize", DECL_ATTRIBUTES (callee->decl)) |
| && opts_for_fn (caller->decl) != opts_for_fn (callee->decl)) |
| { |
| e->inline_failed = CIF_OPTIMIZATION_MISMATCH; |
| inlinable = false; |
| } |
| /* If explicit optimize attribute are not used, the mismatch is caused |
| by different command line options used to build different units. |
| Do not care about COMDAT functions - those are intended to be |
| optimized with the optimization flags of module they are used in. |
| Also do not care about mixing up size/speed optimization when |
| DECL_DISREGARD_INLINE_LIMITS is set. */ |
| else if ((callee->merged_comdat |
| && !lookup_attribute ("optimize", |
| DECL_ATTRIBUTES (caller->decl))) |
| || DECL_DISREGARD_INLINE_LIMITS (callee->decl)) |
| ; |
| /* If mismatch is caused by merging two LTO units with different |
| optimization flags we want to be bit nicer. However never inline |
| if one of functions is not optimized at all. */ |
| else if (!opt_for_fn (callee->decl, optimize) |
| || !opt_for_fn (caller->decl, optimize)) |
| { |
| e->inline_failed = CIF_OPTIMIZATION_MISMATCH; |
| inlinable = false; |
| } |
| /* If callee is optimized for size and caller is not, allow inlining if |
| code shrinks or we are in param_max_inline_insns_single limit and |
| callee is inline (and thus likely an unified comdat). |
| This will allow caller to run faster. */ |
| else if (opt_for_fn (callee->decl, optimize_size) |
| > opt_for_fn (caller->decl, optimize_size)) |
| { |
| int growth = estimate_edge_growth (e); |
| if (growth > opt_for_fn (caller->decl, param_max_inline_insns_size) |
| && (!DECL_DECLARED_INLINE_P (callee->decl) |
| && growth >= MAX (inline_insns_single (caller, false, false), |
| inline_insns_auto (caller, false, false)))) |
| { |
| e->inline_failed = CIF_OPTIMIZATION_MISMATCH; |
| inlinable = false; |
| } |
| } |
| /* If callee is more aggressively optimized for performance than caller, |
| we generally want to inline only cheap (runtime wise) functions. */ |
| else if (opt_for_fn (callee->decl, optimize_size) |
| < opt_for_fn (caller->decl, optimize_size) |
| || (opt_for_fn (callee->decl, optimize) |
| > opt_for_fn (caller->decl, optimize))) |
| { |
| if (estimate_edge_time (e) |
| >= 20 + ipa_call_summaries->get (e)->call_stmt_time) |
| { |
| e->inline_failed = CIF_OPTIMIZATION_MISMATCH; |
| inlinable = false; |
| } |
| } |
| |
| } |
| |
| if (!inlinable && report) |
| report_inline_failed_reason (e); |
| return inlinable; |
| } |
| |
| |
| /* Return true if the edge E is inlinable during early inlining. */ |
| |
| static bool |
| can_early_inline_edge_p (struct cgraph_edge *e) |
| { |
| struct cgraph_node *callee = e->callee->ultimate_alias_target (); |
| /* Early inliner might get called at WPA stage when IPA pass adds new |
| function. In this case we cannot really do any of early inlining |
| because function bodies are missing. */ |
| if (cgraph_inline_failed_type (e->inline_failed) == CIF_FINAL_ERROR) |
| return false; |
| if (!gimple_has_body_p (callee->decl)) |
| { |
| e->inline_failed = CIF_BODY_NOT_AVAILABLE; |
| return false; |
| } |
| /* In early inliner some of callees may not be in SSA form yet |
| (i.e. the callgraph is cyclic and we did not process |
| the callee by early inliner, yet). We don't have CIF code for this |
| case; later we will re-do the decision in the real inliner. */ |
| if (!gimple_in_ssa_p (DECL_STRUCT_FUNCTION (e->caller->decl)) |
| || !gimple_in_ssa_p (DECL_STRUCT_FUNCTION (callee->decl))) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, e->call_stmt, |
| " edge not inlinable: not in SSA form\n"); |
| return false; |
| } |
| if (!can_inline_edge_p (e, true, true) |
| || !can_inline_edge_by_limits_p (e, true, false, true)) |
| return false; |
| return true; |
| } |
| |
| |
| /* Return number of calls in N. Ignore cheap builtins. */ |
| |
| static int |
| num_calls (struct cgraph_node *n) |
| { |
| struct cgraph_edge *e; |
| int num = 0; |
| |
| for (e = n->callees; e; e = e->next_callee) |
| if (!is_inexpensive_builtin (e->callee->decl)) |
| num++; |
| return num; |
| } |
| |
| |
| /* Return true if we are interested in inlining small function. */ |
| |
| static bool |
| want_early_inline_function_p (struct cgraph_edge *e) |
| { |
| bool want_inline = true; |
| struct cgraph_node *callee = e->callee->ultimate_alias_target (); |
| |
| if (DECL_DISREGARD_INLINE_LIMITS (callee->decl)) |
| ; |
| /* For AutoFDO, we need to make sure that before profile summary, all |
| hot paths' IR look exactly the same as profiled binary. As a result, |
| in einliner, we will disregard size limit and inline those callsites |
| that are: |
| * inlined in the profiled binary, and |
| * the cloned callee has enough samples to be considered "hot". */ |
| else if (flag_auto_profile && afdo_callsite_hot_enough_for_early_inline (e)) |
| ; |
| else if (!DECL_DECLARED_INLINE_P (callee->decl) |
| && !opt_for_fn (e->caller->decl, flag_inline_small_functions)) |
| { |
| e->inline_failed = CIF_FUNCTION_NOT_INLINE_CANDIDATE; |
| report_inline_failed_reason (e); |
| want_inline = false; |
| } |
| else |
| { |
| /* First take care of very large functions. */ |
| int min_growth = estimate_min_edge_growth (e), growth = 0; |
| int n; |
| int early_inlining_insns = param_early_inlining_insns; |
| |
| if (min_growth > early_inlining_insns) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, e->call_stmt, |
| " will not early inline: %C->%C, " |
| "call is cold and code would grow " |
| "at least by %i\n", |
| e->caller, callee, |
| min_growth); |
| want_inline = false; |
| } |
| else |
| growth = estimate_edge_growth (e); |
| |
| |
| if (!want_inline || growth <= param_max_inline_insns_size) |
| ; |
| else if (!e->maybe_hot_p ()) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, e->call_stmt, |
| " will not early inline: %C->%C, " |
| "call is cold and code would grow by %i\n", |
| e->caller, callee, |
| growth); |
| want_inline = false; |
| } |
| else if (growth > early_inlining_insns) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, e->call_stmt, |
| " will not early inline: %C->%C, " |
| "growth %i exceeds --param early-inlining-insns\n", |
| e->caller, callee, growth); |
| want_inline = false; |
| } |
| else if ((n = num_calls (callee)) != 0 |
| && growth * (n + 1) > early_inlining_insns) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, e->call_stmt, |
| " will not early inline: %C->%C, " |
| "growth %i exceeds --param early-inlining-insns " |
| "divided by number of calls\n", |
| e->caller, callee, growth); |
| want_inline = false; |
| } |
| } |
| return want_inline; |
| } |
| |
| /* Compute time of the edge->caller + edge->callee execution when inlining |
| does not happen. */ |
| |
| inline sreal |
| compute_uninlined_call_time (struct cgraph_edge *edge, |
| sreal uninlined_call_time, |
| sreal freq) |
| { |
| cgraph_node *caller = (edge->caller->inlined_to |
| ? edge->caller->inlined_to |
| : edge->caller); |
| |
| if (freq > 0) |
| uninlined_call_time *= freq; |
| else |
| uninlined_call_time = uninlined_call_time >> 11; |
| |
| sreal caller_time = ipa_fn_summaries->get (caller)->time; |
| return uninlined_call_time + caller_time; |
| } |
| |
| /* Same as compute_uinlined_call_time but compute time when inlining |
| does happen. */ |
| |
| inline sreal |
| compute_inlined_call_time (struct cgraph_edge *edge, |
| sreal time, |
| sreal freq) |
| { |
| cgraph_node *caller = (edge->caller->inlined_to |
| ? edge->caller->inlined_to |
| : edge->caller); |
| sreal caller_time = ipa_fn_summaries->get (caller)->time; |
| |
| if (freq > 0) |
| time *= freq; |
| else |
| time = time >> 11; |
| |
| /* This calculation should match one in ipa-inline-analysis.c |
| (estimate_edge_size_and_time). */ |
| time -= (sreal)ipa_call_summaries->get (edge)->call_stmt_time * freq; |
| time += caller_time; |
| if (time <= 0) |
| time = ((sreal) 1) >> 8; |
| gcc_checking_assert (time >= 0); |
| return time; |
| } |
| |
| /* Determine time saved by inlining EDGE of frequency FREQ |
| where callee's runtime w/o inlining is UNINLINED_TYPE |
| and with inlined is INLINED_TYPE. */ |
| |
| inline sreal |
| inlining_speedup (struct cgraph_edge *edge, |
| sreal freq, |
| sreal uninlined_time, |
| sreal inlined_time) |
| { |
| sreal speedup = uninlined_time - inlined_time; |
| /* Handling of call_time should match one in ipa-inline-fnsummary.c |
| (estimate_edge_size_and_time). */ |
| sreal call_time = ipa_call_summaries->get (edge)->call_stmt_time; |
| |
| if (freq > 0) |
| { |
| speedup = (speedup + call_time); |
| if (freq != 1) |
| speedup = speedup * freq; |
| } |
| else if (freq == 0) |
| speedup = speedup >> 11; |
| gcc_checking_assert (speedup >= 0); |
| return speedup; |
| } |
| |
| /* Return true if the speedup for inlining E is bigger than |
| param_inline_min_speedup. */ |
| |
| static bool |
| big_speedup_p (struct cgraph_edge *e) |
| { |
| sreal unspec_time; |
| sreal spec_time = estimate_edge_time (e, &unspec_time); |
| sreal freq = e->sreal_frequency (); |
| sreal time = compute_uninlined_call_time (e, unspec_time, freq); |
| sreal inlined_time = compute_inlined_call_time (e, spec_time, freq); |
| cgraph_node *caller = (e->caller->inlined_to |
| ? e->caller->inlined_to |
| : e->caller); |
| int limit = opt_for_fn (caller->decl, param_inline_min_speedup); |
| |
| if ((time - inlined_time) * 100 > time * limit) |
| return true; |
| return false; |
| } |
| |
| /* Return true if we are interested in inlining small function. |
| When REPORT is true, report reason to dump file. */ |
| |
| static bool |
| want_inline_small_function_p (struct cgraph_edge *e, bool report) |
| { |
| bool want_inline = true; |
| struct cgraph_node *callee = e->callee->ultimate_alias_target (); |
| cgraph_node *to = (e->caller->inlined_to |
| ? e->caller->inlined_to : e->caller); |
| |
| /* Allow this function to be called before can_inline_edge_p, |
| since it's usually cheaper. */ |
| if (cgraph_inline_failed_type (e->inline_failed) == CIF_FINAL_ERROR) |
| want_inline = false; |
| else if (DECL_DISREGARD_INLINE_LIMITS (callee->decl)) |
| ; |
| else if (!DECL_DECLARED_INLINE_P (callee->decl) |
| && !opt_for_fn (e->caller->decl, flag_inline_small_functions)) |
| { |
| e->inline_failed = CIF_FUNCTION_NOT_INLINE_CANDIDATE; |
| want_inline = false; |
| } |
| /* Do fast and conservative check if the function can be good |
| inline candidate. */ |
| else if ((!DECL_DECLARED_INLINE_P (callee->decl) |
| && (!e->count.ipa ().initialized_p () || !e->maybe_hot_p ())) |
| && ipa_fn_summaries->get (callee)->min_size |
| - ipa_call_summaries->get (e)->call_stmt_size |
| > inline_insns_auto (e->caller, true, true)) |
| { |
| e->inline_failed = CIF_MAX_INLINE_INSNS_AUTO_LIMIT; |
| want_inline = false; |
| } |
| else if ((DECL_DECLARED_INLINE_P (callee->decl) |
| || e->count.ipa ().nonzero_p ()) |
| && ipa_fn_summaries->get (callee)->min_size |
| - ipa_call_summaries->get (e)->call_stmt_size |
| > inline_insns_single (e->caller, true, true)) |
| { |
| e->inline_failed = (DECL_DECLARED_INLINE_P (callee->decl) |
| ? CIF_MAX_INLINE_INSNS_SINGLE_LIMIT |
| : CIF_MAX_INLINE_INSNS_AUTO_LIMIT); |
| want_inline = false; |
| } |
| else |
| { |
| int growth = estimate_edge_growth (e); |
| ipa_hints hints = estimate_edge_hints (e); |
| /* We have two independent groups of hints. If one matches in each |
| of groups the limits are inreased. If both groups matches, limit |
| is increased even more. */ |
| bool apply_hints = (hints & (INLINE_HINT_indirect_call |
| | INLINE_HINT_known_hot |
| | INLINE_HINT_loop_iterations |
| | INLINE_HINT_loop_stride)); |
| bool apply_hints2 = (hints & INLINE_HINT_builtin_constant_p); |
| |
| if (growth <= opt_for_fn (to->decl, |
| param_max_inline_insns_size)) |
| ; |
| /* Apply param_max_inline_insns_single limit. Do not do so when |
| hints suggests that inlining given function is very profitable. |
| Avoid computation of big_speedup_p when not necessary to change |
| outcome of decision. */ |
| else if (DECL_DECLARED_INLINE_P (callee->decl) |
| && growth >= inline_insns_single (e->caller, apply_hints, |
| apply_hints2) |
| && (apply_hints || apply_hints2 |
| || growth >= inline_insns_single (e->caller, true, |
| apply_hints2) |
| || !big_speedup_p (e))) |
| { |
| e->inline_failed = CIF_MAX_INLINE_INSNS_SINGLE_LIMIT; |
| want_inline = false; |
| } |
| else if (!DECL_DECLARED_INLINE_P (callee->decl) |
| && !opt_for_fn (e->caller->decl, flag_inline_functions) |
| && growth >= opt_for_fn (to->decl, |
| param_max_inline_insns_small)) |
| { |
| /* growth_positive_p is expensive, always test it last. */ |
| if (growth >= inline_insns_single (e->caller, false, false) |
| || growth_positive_p (callee, e, growth)) |
| { |
| e->inline_failed = CIF_NOT_DECLARED_INLINED; |
| want_inline = false; |
| } |
| } |
| /* Apply param_max_inline_insns_auto limit for functions not declared |
| inline. Bypass the limit when speedup seems big. */ |
| else if (!DECL_DECLARED_INLINE_P (callee->decl) |
| && growth >= inline_insns_auto (e->caller, apply_hints, |
| apply_hints2) |
| && (apply_hints || apply_hints2 |
| || growth >= inline_insns_auto (e->caller, true, |
| apply_hints2) |
| || !big_speedup_p (e))) |
| { |
| /* growth_positive_p is expensive, always test it last. */ |
| if (growth >= inline_insns_single (e->caller, false, false) |
| || growth_positive_p (callee, e, growth)) |
| { |
| e->inline_failed = CIF_MAX_INLINE_INSNS_AUTO_LIMIT; |
| want_inline = false; |
| } |
| } |
| /* If call is cold, do not inline when function body would grow. */ |
| else if (!e->maybe_hot_p () |
| && (growth >= inline_insns_single (e->caller, false, false) |
| || growth_positive_p (callee, e, growth))) |
| { |
| e->inline_failed = CIF_UNLIKELY_CALL; |
| want_inline = false; |
| } |
| } |
| if (!want_inline && report) |
| report_inline_failed_reason (e); |
| return want_inline; |
| } |
| |
| /* EDGE is self recursive edge. |
| We handle two cases - when function A is inlining into itself |
| or when function A is being inlined into another inliner copy of function |
| A within function B. |
| |
| In first case OUTER_NODE points to the toplevel copy of A, while |
| in the second case OUTER_NODE points to the outermost copy of A in B. |
| |
| In both cases we want to be extra selective since |
| inlining the call will just introduce new recursive calls to appear. */ |
| |
| static bool |
| want_inline_self_recursive_call_p (struct cgraph_edge *edge, |
| struct cgraph_node *outer_node, |
| bool peeling, |
| int depth) |
| { |
| char const *reason = NULL; |
| bool want_inline = true; |
| sreal caller_freq = 1; |
| int max_depth = opt_for_fn (outer_node->decl, |
| param_max_inline_recursive_depth_auto); |
| |
| if (DECL_DECLARED_INLINE_P (edge->caller->decl)) |
| max_depth = opt_for_fn (outer_node->decl, |
| param_max_inline_recursive_depth); |
| |
| if (!edge->maybe_hot_p ()) |
| { |
| reason = "recursive call is cold"; |
| want_inline = false; |
| } |
| else if (depth > max_depth) |
| { |
| reason = "--param max-inline-recursive-depth exceeded."; |
| want_inline = false; |
| } |
| else if (outer_node->inlined_to |
| && (caller_freq = outer_node->callers->sreal_frequency ()) == 0) |
| { |
| reason = "caller frequency is 0"; |
| want_inline = false; |
| } |
| |
| if (!want_inline) |
| ; |
| /* Inlining of self recursive function into copy of itself within other |
| function is transformation similar to loop peeling. |
| |
| Peeling is profitable if we can inline enough copies to make probability |
| of actual call to the self recursive function very small. Be sure that |
| the probability of recursion is small. |
| |
| We ensure that the frequency of recursing is at most 1 - (1/max_depth). |
| This way the expected number of recursion is at most max_depth. */ |
| else if (peeling) |
| { |
| sreal max_prob = (sreal)1 - ((sreal)1 / (sreal)max_depth); |
| int i; |
| for (i = 1; i < depth; i++) |
| max_prob = max_prob * max_prob; |
| if (edge->sreal_frequency () >= max_prob * caller_freq) |
| { |
| reason = "frequency of recursive call is too large"; |
| want_inline = false; |
| } |
| } |
| /* Recursive inlining, i.e. equivalent of unrolling, is profitable if |
| recursion depth is large. We reduce function call overhead and increase |
| chances that things fit in hardware return predictor. |
| |
| Recursive inlining might however increase cost of stack frame setup |
| actually slowing down functions whose recursion tree is wide rather than |
| deep. |
| |
| Deciding reliably on when to do recursive inlining without profile feedback |
| is tricky. For now we disable recursive inlining when probability of self |
| recursion is low. |
| |
| Recursive inlining of self recursive call within loop also results in |
| large loop depths that generally optimize badly. We may want to throttle |
| down inlining in those cases. In particular this seems to happen in one |
| of libstdc++ rb tree methods. */ |
| else |
| { |
| if (edge->sreal_frequency () * 100 |
| <= caller_freq |
| * opt_for_fn (outer_node->decl, |
| param_min_inline_recursive_probability)) |
| { |
| reason = "frequency of recursive call is too small"; |
| want_inline = false; |
| } |
| } |
| if (!want_inline && dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, edge->call_stmt, |
| " not inlining recursively: %s\n", reason); |
| return want_inline; |
| } |
| |
| /* Return true when NODE has uninlinable caller; |
| set HAS_HOT_CALL if it has hot call. |
| Worker for cgraph_for_node_and_aliases. */ |
| |
| static bool |
| check_callers (struct cgraph_node *node, void *has_hot_call) |
| { |
| struct cgraph_edge *e; |
| for (e = node->callers; e; e = e->next_caller) |
| { |
| if (!opt_for_fn (e->caller->decl, flag_inline_functions_called_once) |
| || !opt_for_fn (e->caller->decl, optimize)) |
| return true; |
| if (!can_inline_edge_p (e, true)) |
| return true; |
| if (e->recursive_p ()) |
| return true; |
| if (!can_inline_edge_by_limits_p (e, true)) |
| return true; |
| if (!(*(bool *)has_hot_call) && e->maybe_hot_p ()) |
| *(bool *)has_hot_call = true; |
| } |
| return false; |
| } |
| |
| /* If NODE has a caller, return true. */ |
| |
| static bool |
| has_caller_p (struct cgraph_node *node, void *data ATTRIBUTE_UNUSED) |
| { |
| if (node->callers) |
| return true; |
| return false; |
| } |
| |
| /* Decide if inlining NODE would reduce unit size by eliminating |
| the offline copy of function. |
| When COLD is true the cold calls are considered, too. */ |
| |
| static bool |
| want_inline_function_to_all_callers_p (struct cgraph_node *node, bool cold) |
| { |
| bool has_hot_call = false; |
| |
| /* Aliases gets inlined along with the function they alias. */ |
| if (node->alias) |
| return false; |
| /* Already inlined? */ |
| if (node->inlined_to) |
| return false; |
| /* Does it have callers? */ |
| if (!node->call_for_symbol_and_aliases (has_caller_p, NULL, true)) |
| return false; |
| /* Inlining into all callers would increase size? */ |
| if (growth_positive_p (node, NULL, INT_MIN) > 0) |
| return false; |
| /* All inlines must be possible. */ |
| if (node->call_for_symbol_and_aliases (check_callers, &has_hot_call, |
| true)) |
| return false; |
| if (!cold && !has_hot_call) |
| return false; |
| return true; |
| } |
| |
| /* Return true if WHERE of SIZE is a possible candidate for wrapper heuristics |
| in estimate_edge_badness. */ |
| |
| static bool |
| wrapper_heuristics_may_apply (struct cgraph_node *where, int size) |
| { |
| return size < (DECL_DECLARED_INLINE_P (where->decl) |
| ? inline_insns_single (where, false, false) |
| : inline_insns_auto (where, false, false)); |
| } |
| |
| /* A cost model driving the inlining heuristics in a way so the edges with |
| smallest badness are inlined first. After each inlining is performed |
| the costs of all caller edges of nodes affected are recomputed so the |
| metrics may accurately depend on values such as number of inlinable callers |
| of the function or function body size. */ |
| |
| static sreal |
| edge_badness (struct cgraph_edge *edge, bool dump) |
| { |
| sreal badness; |
| int growth; |
| sreal edge_time, unspec_edge_time; |
| struct cgraph_node *callee = edge->callee->ultimate_alias_target (); |
| class ipa_fn_summary *callee_info = ipa_fn_summaries->get (callee); |
| ipa_hints hints; |
| cgraph_node *caller = (edge->caller->inlined_to |
| ? edge->caller->inlined_to |
| : edge->caller); |
| |
| growth = estimate_edge_growth (edge); |
| edge_time = estimate_edge_time (edge, &unspec_edge_time); |
| hints = estimate_edge_hints (edge); |
| gcc_checking_assert (edge_time >= 0); |
| /* Check that inlined time is better, but tolerate some roundoff issues. |
| FIXME: When callee profile drops to 0 we account calls more. This |
| should be fixed by never doing that. */ |
| gcc_checking_assert ((edge_time * 100 |
| - callee_info->time * 101).to_int () <= 0 |
| || callee->count.ipa ().initialized_p ()); |
| gcc_checking_assert (growth <= ipa_size_summaries->get (callee)->size); |
| |
| if (dump) |
| { |
| fprintf (dump_file, " Badness calculation for %s -> %s\n", |
| edge->caller->dump_name (), |
| edge->callee->dump_name ()); |
| fprintf (dump_file, " size growth %i, time %f unspec %f ", |
| growth, |
| edge_time.to_double (), |
| unspec_edge_time.to_double ()); |
| ipa_dump_hints (dump_file, hints); |
| if (big_speedup_p (edge)) |
| fprintf (dump_file, " big_speedup"); |
| fprintf (dump_file, "\n"); |
| } |
| |
| /* Always prefer inlining saving code size. */ |
| if (growth <= 0) |
| { |
| badness = (sreal) (-SREAL_MIN_SIG + growth) << (SREAL_MAX_EXP / 256); |
| if (dump) |
| fprintf (dump_file, " %f: Growth %d <= 0\n", badness.to_double (), |
| growth); |
| } |
| /* Inlining into EXTERNAL functions is not going to change anything unless |
| they are themselves inlined. */ |
| else if (DECL_EXTERNAL (caller->decl)) |
| { |
| if (dump) |
| fprintf (dump_file, " max: function is external\n"); |
| return sreal::max (); |
| } |
| /* When profile is available. Compute badness as: |
| |
| time_saved * caller_count |
| goodness = ------------------------------------------------- |
| growth_of_caller * overall_growth * combined_size |
| |
| badness = - goodness |
| |
| Again use negative value to make calls with profile appear hotter |
| then calls without. |
| */ |
| else if (opt_for_fn (caller->decl, flag_guess_branch_prob) |
| || caller->count.ipa ().nonzero_p ()) |
| { |
| sreal numerator, denominator; |
| int overall_growth; |
| sreal freq = edge->sreal_frequency (); |
| |
| numerator = inlining_speedup (edge, freq, unspec_edge_time, edge_time); |
| if (numerator <= 0) |
| numerator = ((sreal) 1 >> 8); |
| if (caller->count.ipa ().nonzero_p ()) |
| numerator *= caller->count.ipa ().to_gcov_type (); |
| else if (caller->count.ipa ().initialized_p ()) |
| numerator = numerator >> 11; |
| denominator = growth; |
| |
| overall_growth = callee_info->growth; |
| |
| /* Look for inliner wrappers of the form: |
| |
| inline_caller () |
| { |
| do_fast_job... |
| if (need_more_work) |
| noninline_callee (); |
| } |
| Without penalizing this case, we usually inline noninline_callee |
| into the inline_caller because overall_growth is small preventing |
| further inlining of inline_caller. |
| |
| Penalize only callgraph edges to functions with small overall |
| growth ... |
| */ |
| if (growth > overall_growth |
| /* ... and having only one caller which is not inlined ... */ |
| && callee_info->single_caller |
| && !edge->caller->inlined_to |
| /* ... and edges executed only conditionally ... */ |
| && freq < 1 |
| /* ... consider case where callee is not inline but caller is ... */ |
| && ((!DECL_DECLARED_INLINE_P (edge->callee->decl) |
| && DECL_DECLARED_INLINE_P (caller->decl)) |
| /* ... or when early optimizers decided to split and edge |
| frequency still indicates splitting is a win ... */ |
| || (callee->split_part && !caller->split_part |
| && freq * 100 |
| < opt_for_fn (caller->decl, |
| param_partial_inlining_entry_probability) |
| /* ... and do not overwrite user specified hints. */ |
| && (!DECL_DECLARED_INLINE_P (edge->callee->decl) |
| || DECL_DECLARED_INLINE_P (caller->decl))))) |
| { |
| ipa_fn_summary *caller_info = ipa_fn_summaries->get (caller); |
| int caller_growth = caller_info->growth; |
| |
| /* Only apply the penalty when caller looks like inline candidate, |
| and it is not called once. */ |
| if (!caller_info->single_caller && overall_growth < caller_growth |
| && caller_info->inlinable |
| && wrapper_heuristics_may_apply |
| (caller, ipa_size_summaries->get (caller)->size)) |
| { |
| if (dump) |
| fprintf (dump_file, |
| " Wrapper penalty. Increasing growth %i to %i\n", |
| overall_growth, caller_growth); |
| overall_growth = caller_growth; |
| } |
| } |
| if (overall_growth > 0) |
| { |
| /* Strongly prefer functions with few callers that can be inlined |
| fully. The square root here leads to smaller binaries at average. |
| Watch however for extreme cases and return to linear function |
| when growth is large. */ |
| if (overall_growth < 256) |
| overall_growth *= overall_growth; |
| else |
| overall_growth += 256 * 256 - 256; |
| denominator *= overall_growth; |
| } |
| denominator *= ipa_size_summaries->get (caller)->size + growth; |
| |
| badness = - numerator / denominator; |
| |
| if (dump) |
| { |
| fprintf (dump_file, |
| " %f: guessed profile. frequency %f, count %" PRId64 |
| " caller count %" PRId64 |
| " time saved %f" |
| " overall growth %i (current) %i (original)" |
| " %i (compensated)\n", |
| badness.to_double (), |
| freq.to_double (), |
| edge->count.ipa ().initialized_p () ? edge->count.ipa ().to_gcov_type () : -1, |
| caller->count.ipa ().initialized_p () ? caller->count.ipa ().to_gcov_type () : -1, |
| inlining_speedup (edge, freq, unspec_edge_time, edge_time).to_double (), |
| estimate_growth (callee), |
| callee_info->growth, overall_growth); |
| } |
| } |
| /* When function local profile is not available or it does not give |
| useful information (i.e. frequency is zero), base the cost on |
| loop nest and overall size growth, so we optimize for overall number |
| of functions fully inlined in program. */ |
| else |
| { |
| int nest = MIN (ipa_call_summaries->get (edge)->loop_depth, 8); |
| badness = growth; |
| |
| /* Decrease badness if call is nested. */ |
| if (badness > 0) |
| badness = badness >> nest; |
| else |
| badness = badness << nest; |
| if (dump) |
| fprintf (dump_file, " %f: no profile. nest %i\n", |
| badness.to_double (), nest); |
| } |
| gcc_checking_assert (badness != 0); |
| |
| if (edge->recursive_p ()) |
| badness = badness.shift (badness > 0 ? 4 : -4); |
| if ((hints & (INLINE_HINT_indirect_call |
| | INLINE_HINT_loop_iterations |
| | INLINE_HINT_loop_stride)) |
| || callee_info->growth <= 0) |
| badness = badness.shift (badness > 0 ? -2 : 2); |
| if (hints & INLINE_HINT_builtin_constant_p) |
| badness = badness.shift (badness > 0 ? -4 : 4); |
| if (hints & (INLINE_HINT_same_scc)) |
| badness = badness.shift (badness > 0 ? 3 : -3); |
| else if (hints & (INLINE_HINT_in_scc)) |
| badness = badness.shift (badness > 0 ? 2 : -2); |
| else if (hints & (INLINE_HINT_cross_module)) |
| badness = badness.shift (badness > 0 ? 1 : -1); |
| if (DECL_DISREGARD_INLINE_LIMITS (callee->decl)) |
| badness = badness.shift (badness > 0 ? -4 : 4); |
| else if ((hints & INLINE_HINT_declared_inline)) |
| badness = badness.shift (badness > 0 ? -3 : 3); |
| if (dump) |
| fprintf (dump_file, " Adjusted by hints %f\n", badness.to_double ()); |
| return badness; |
| } |
| |
| /* Recompute badness of EDGE and update its key in HEAP if needed. */ |
| static inline void |
| update_edge_key (edge_heap_t *heap, struct cgraph_edge *edge) |
| { |
| sreal badness = edge_badness (edge, false); |
| if (edge->aux) |
| { |
| edge_heap_node_t *n = (edge_heap_node_t *) edge->aux; |
| gcc_checking_assert (n->get_data () == edge); |
| |
| /* fibonacci_heap::replace_key does busy updating of the |
| heap that is unnecessarily expensive. |
| We do lazy increases: after extracting minimum if the key |
| turns out to be out of date, it is re-inserted into heap |
| with correct value. */ |
| if (badness < n->get_key ()) |
| { |
| if (dump_file && (dump_flags & TDF_DETAILS)) |
| { |
| fprintf (dump_file, |
| " decreasing badness %s -> %s, %f to %f\n", |
| edge->caller->dump_name (), |
| edge->callee->dump_name (), |
| n->get_key ().to_double (), |
| badness.to_double ()); |
| } |
| heap->decrease_key (n, badness); |
| } |
| } |
| else |
| { |
| if (dump_file && (dump_flags & TDF_DETAILS)) |
| { |
| fprintf (dump_file, |
| " enqueuing call %s -> %s, badness %f\n", |
| edge->caller->dump_name (), |
| edge->callee->dump_name (), |
| badness.to_double ()); |
| } |
| edge->aux = heap->insert (badness, edge); |
| } |
| } |
| |
| |
| /* NODE was inlined. |
| All caller edges needs to be reset because |
| size estimates change. Similarly callees needs reset |
| because better context may be known. */ |
| |
| static void |
| reset_edge_caches (struct cgraph_node *node) |
| { |
| struct cgraph_edge *edge; |
| struct cgraph_edge *e = node->callees; |
| struct cgraph_node *where = node; |
| struct ipa_ref *ref; |
| |
| if (where->inlined_to) |
| where = where->inlined_to; |
| |
| reset_node_cache (where); |
| |
| if (edge_growth_cache != NULL) |
| for (edge = where->callers; edge; edge = edge->next_caller) |
| if (edge->inline_failed) |
| edge_growth_cache->remove (edge); |
| |
| FOR_EACH_ALIAS (where, ref) |
| reset_edge_caches (dyn_cast <cgraph_node *> (ref->referring)); |
| |
| if (!e) |
| return; |
| |
| while (true) |
| if (!e->inline_failed && e->callee->callees) |
| e = e->callee->callees; |
| else |
| { |
| if (edge_growth_cache != NULL && e->inline_failed) |
| edge_growth_cache->remove (e); |
| if (e->next_callee) |
| e = e->next_callee; |
| else |
| { |
| do |
| { |
| if (e->caller == node) |
| return; |
| e = e->caller->callers; |
| } |
| while (!e->next_callee); |
| e = e->next_callee; |
| } |
| } |
| } |
| |
| /* Recompute HEAP nodes for each of caller of NODE. |
| UPDATED_NODES track nodes we already visited, to avoid redundant work. |
| When CHECK_INLINABLITY_FOR is set, re-check for specified edge that |
| it is inlinable. Otherwise check all edges. */ |
| |
| static void |
| update_caller_keys (edge_heap_t *heap, struct cgraph_node *node, |
| bitmap updated_nodes, |
| struct cgraph_edge *check_inlinablity_for) |
| { |
| struct cgraph_edge *edge; |
| struct ipa_ref *ref; |
| |
| if ((!node->alias && !ipa_fn_summaries->get (node)->inlinable) |
| || node->inlined_to) |
| return; |
| if (!bitmap_set_bit (updated_nodes, node->get_uid ())) |
| return; |
| |
| FOR_EACH_ALIAS (node, ref) |
| { |
| struct cgraph_node *alias = dyn_cast <cgraph_node *> (ref->referring); |
| update_caller_keys (heap, alias, updated_nodes, check_inlinablity_for); |
| } |
| |
| for (edge = node->callers; edge; edge = edge->next_caller) |
| if (edge->inline_failed) |
| { |
| if (!check_inlinablity_for |
| || check_inlinablity_for == edge) |
| { |
| if (can_inline_edge_p (edge, false) |
| && want_inline_small_function_p (edge, false) |
| && can_inline_edge_by_limits_p (edge, false)) |
| update_edge_key (heap, edge); |
| else if (edge->aux) |
| { |
| report_inline_failed_reason (edge); |
| heap->delete_node ((edge_heap_node_t *) edge->aux); |
| edge->aux = NULL; |
| } |
| } |
| else if (edge->aux) |
| update_edge_key (heap, edge); |
| } |
| } |
| |
| /* Recompute HEAP nodes for each uninlined call in NODE |
| If UPDATE_SINCE is non-NULL check if edges called within that function |
| are inlinable (typically UPDATE_SINCE is the inline clone we introduced |
| where all edges have new context). |
| |
| This is used when we know that edge badnesses are going only to increase |
| (we introduced new call site) and thus all we need is to insert newly |
| created edges into heap. */ |
| |
| static void |
| update_callee_keys (edge_heap_t *heap, struct cgraph_node *node, |
| struct cgraph_node *update_since, |
| bitmap updated_nodes) |
| { |
| struct cgraph_edge *e = node->callees; |
| bool check_inlinability = update_since == node; |
| |
| if (!e) |
| return; |
| while (true) |
| if (!e->inline_failed && e->callee->callees) |
| { |
| if (e->callee == update_since) |
| check_inlinability = true; |
| e = e->callee->callees; |
| } |
| else |
| { |
| enum availability avail; |
| struct cgraph_node *callee; |
| if (!check_inlinability) |
| { |
| if (e->aux |
| && !bitmap_bit_p (updated_nodes, |
| e->callee->ultimate_alias_target |
| (&avail, e->caller)->get_uid ())) |
| update_edge_key (heap, e); |
| } |
| /* We do not reset callee growth cache here. Since we added a new call, |
| growth should have just increased and consequently badness metric |
| don't need updating. */ |
| else if (e->inline_failed |
| && (callee = e->callee->ultimate_alias_target (&avail, |
| e->caller)) |
| && avail >= AVAIL_AVAILABLE |
| && ipa_fn_summaries->get (callee) != NULL |
| && ipa_fn_summaries->get (callee)->inlinable |
| && !bitmap_bit_p (updated_nodes, callee->get_uid ())) |
| { |
| if (can_inline_edge_p (e, false) |
| && want_inline_small_function_p (e, false) |
| && can_inline_edge_by_limits_p (e, false)) |
| { |
| gcc_checking_assert (check_inlinability || can_inline_edge_p (e, false)); |
| gcc_checking_assert (check_inlinability || e->aux); |
| update_edge_key (heap, e); |
| } |
| else if (e->aux) |
| { |
| report_inline_failed_reason (e); |
| heap->delete_node ((edge_heap_node_t *) e->aux); |
| e->aux = NULL; |
| } |
| } |
| /* In case we redirected to unreachable node we only need to remove the |
| fibheap entry. */ |
| else if (e->aux) |
| { |
| heap->delete_node ((edge_heap_node_t *) e->aux); |
| e->aux = NULL; |
| } |
| if (e->next_callee) |
| e = e->next_callee; |
| else |
| { |
| do |
| { |
| if (e->caller == node) |
| return; |
| if (e->caller == update_since) |
| check_inlinability = false; |
| e = e->caller->callers; |
| } |
| while (!e->next_callee); |
| e = e->next_callee; |
| } |
| } |
| } |
| |
| /* Enqueue all recursive calls from NODE into priority queue depending on |
| how likely we want to recursively inline the call. */ |
| |
| static void |
| lookup_recursive_calls (struct cgraph_node *node, struct cgraph_node *where, |
| edge_heap_t *heap) |
| { |
| struct cgraph_edge *e; |
| enum availability avail; |
| |
| for (e = where->callees; e; e = e->next_callee) |
| if (e->callee == node |
| || (e->callee->ultimate_alias_target (&avail, e->caller) == node |
| && avail > AVAIL_INTERPOSABLE)) |
| heap->insert (-e->sreal_frequency (), e); |
| for (e = where->callees; e; e = e->next_callee) |
| if (!e->inline_failed) |
| lookup_recursive_calls (node, e->callee, heap); |
| } |
| |
| /* Decide on recursive inlining: in the case function has recursive calls, |
| inline until body size reaches given argument. If any new indirect edges |
| are discovered in the process, add them to *NEW_EDGES, unless NEW_EDGES |
| is NULL. */ |
| |
| static bool |
| recursive_inlining (struct cgraph_edge *edge, |
| vec<cgraph_edge *> *new_edges) |
| { |
| cgraph_node *to = (edge->caller->inlined_to |
| ? edge->caller->inlined_to : edge->caller); |
| int limit = opt_for_fn (to->decl, |
| param_max_inline_insns_recursive_auto); |
| edge_heap_t heap (sreal::min ()); |
| struct cgraph_node *node; |
| struct cgraph_edge *e; |
| struct cgraph_node *master_clone = NULL, *next; |
| int depth = 0; |
| int n = 0; |
| |
| node = edge->caller; |
| if (node->inlined_to) |
| node = node->inlined_to; |
| |
| if (DECL_DECLARED_INLINE_P (node->decl)) |
| limit = opt_for_fn (to->decl, param_max_inline_insns_recursive); |
| |
| /* Make sure that function is small enough to be considered for inlining. */ |
| if (estimate_size_after_inlining (node, edge) >= limit) |
| return false; |
| lookup_recursive_calls (node, node, &heap); |
| if (heap.empty ()) |
| return false; |
| |
| if (dump_file) |
| fprintf (dump_file, |
| " Performing recursive inlining on %s\n", node->dump_name ()); |
| |
| /* Do the inlining and update list of recursive call during process. */ |
| while (!heap.empty ()) |
| { |
| struct cgraph_edge *curr = heap.extract_min (); |
| struct cgraph_node *cnode, *dest = curr->callee; |
| |
| if (!can_inline_edge_p (curr, true) |
| || !can_inline_edge_by_limits_p (curr, true)) |
| continue; |
| |
| /* MASTER_CLONE is produced in the case we already started modified |
| the function. Be sure to redirect edge to the original body before |
| estimating growths otherwise we will be seeing growths after inlining |
| the already modified body. */ |
| if (master_clone) |
| { |
| curr->redirect_callee (master_clone); |
| if (edge_growth_cache != NULL) |
| edge_growth_cache->remove (curr); |
| } |
| |
| if (estimate_size_after_inlining (node, curr) > limit) |
| { |
| curr->redirect_callee (dest); |
| if (edge_growth_cache != NULL) |
| edge_growth_cache->remove (curr); |
| break; |
| } |
| |
| depth = 1; |
| for (cnode = curr->caller; |
| cnode->inlined_to; cnode = cnode->callers->caller) |
| if (node->decl |
| == curr->callee->ultimate_alias_target ()->decl) |
| depth++; |
| |
| if (!want_inline_self_recursive_call_p (curr, node, false, depth)) |
| { |
| curr->redirect_callee (dest); |
| if (edge_growth_cache != NULL) |
| edge_growth_cache->remove (curr); |
| continue; |
| } |
| |
| if (dump_file) |
| { |
| fprintf (dump_file, |
| " Inlining call of depth %i", depth); |
| if (node->count.nonzero_p () && curr->count.initialized_p ()) |
| { |
| fprintf (dump_file, " called approx. %.2f times per call", |
| (double)curr->count.to_gcov_type () |
| / node->count.to_gcov_type ()); |
| } |
| fprintf (dump_file, "\n"); |
| } |
| if (!master_clone) |
| { |
| /* We need original clone to copy around. */ |
| master_clone = node->create_clone (node->decl, node->count, |
| false, vNULL, true, NULL, NULL); |
| for (e = master_clone->callees; e; e = e->next_callee) |
| if (!e->inline_failed) |
| clone_inlined_nodes (e, true, false, NULL); |
| curr->redirect_callee (master_clone); |
| if (edge_growth_cache != NULL) |
| edge_growth_cache->remove (curr); |
| } |
| |
| inline_call (curr, false, new_edges, &overall_size, true); |
| reset_node_cache (node); |
| lookup_recursive_calls (node, curr->callee, &heap); |
| n++; |
| } |
| |
| if (!heap.empty () && dump_file) |
| fprintf (dump_file, " Recursive inlining growth limit met.\n"); |
| |
| if (!master_clone) |
| return false; |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, edge->call_stmt, |
| "\n Inlined %i times, " |
| "body grown from size %i to %i, time %f to %f\n", n, |
| ipa_size_summaries->get (master_clone)->size, |
| ipa_size_summaries->get (node)->size, |
| ipa_fn_summaries->get (master_clone)->time.to_double (), |
| ipa_fn_summaries->get (node)->time.to_double ()); |
| |
| /* Remove master clone we used for inlining. We rely that clones inlined |
| into master clone gets queued just before master clone so we don't |
| need recursion. */ |
| for (node = symtab->first_function (); node != master_clone; |
| node = next) |
| { |
| next = symtab->next_function (node); |
| if (node->inlined_to == master_clone) |
| node->remove (); |
| } |
| master_clone->remove (); |
| return true; |
| } |
| |
| |
| /* Given whole compilation unit estimate of INSNS, compute how large we can |
| allow the unit to grow. */ |
| |
| static int64_t |
| compute_max_insns (cgraph_node *node, int insns) |
| { |
| int max_insns = insns; |
| if (max_insns < opt_for_fn (node->decl, param_large_unit_insns)) |
| max_insns = opt_for_fn (node->decl, param_large_unit_insns); |
| |
| return ((int64_t) max_insns |
| * (100 + opt_for_fn (node->decl, param_inline_unit_growth)) / 100); |
| } |
| |
| |
| /* Compute badness of all edges in NEW_EDGES and add them to the HEAP. */ |
| |
| static void |
| add_new_edges_to_heap (edge_heap_t *heap, vec<cgraph_edge *> new_edges) |
| { |
| while (new_edges.length () > 0) |
| { |
| struct cgraph_edge *edge = new_edges.pop (); |
| |
| gcc_assert (!edge->aux); |
| gcc_assert (edge->callee); |
| if (edge->inline_failed |
| && can_inline_edge_p (edge, true) |
| && want_inline_small_function_p (edge, true) |
| && can_inline_edge_by_limits_p (edge, true)) |
| edge->aux = heap->insert (edge_badness (edge, false), edge); |
| } |
| } |
| |
| /* Remove EDGE from the fibheap. */ |
| |
| static void |
| heap_edge_removal_hook (struct cgraph_edge *e, void *data) |
| { |
| if (e->aux) |
| { |
| ((edge_heap_t *)data)->delete_node ((edge_heap_node_t *)e->aux); |
| e->aux = NULL; |
| } |
| } |
| |
| /* Return true if speculation of edge E seems useful. |
| If ANTICIPATE_INLINING is true, be conservative and hope that E |
| may get inlined. */ |
| |
| bool |
| speculation_useful_p (struct cgraph_edge *e, bool anticipate_inlining) |
| { |
| /* If we have already decided to inline the edge, it seems useful. */ |
| if (!e->inline_failed) |
| return true; |
| |
| enum availability avail; |
| struct cgraph_node *target = e->callee->ultimate_alias_target (&avail, |
| e->caller); |
| |
| gcc_assert (e->speculative && !e->indirect_unknown_callee); |
| |
| if (!e->maybe_hot_p ()) |
| return false; |
| |
| /* See if IP optimizations found something potentially useful about the |
| function. For now we look only for CONST/PURE flags. Almost everything |
| else we propagate is useless. */ |
| if (avail >= AVAIL_AVAILABLE) |
| { |
| int ecf_flags = flags_from_decl_or_type (target->decl); |
| if (ecf_flags & ECF_CONST) |
| { |
| if (!(e->speculative_call_indirect_edge ()->indirect_info |
| ->ecf_flags & ECF_CONST)) |
| return true; |
| } |
| else if (ecf_flags & ECF_PURE) |
| { |
| if (!(e->speculative_call_indirect_edge ()->indirect_info |
| ->ecf_flags & ECF_PURE)) |
| return true; |
| } |
| } |
| /* If we did not managed to inline the function nor redirect |
| to an ipa-cp clone (that are seen by having local flag set), |
| it is probably pointless to inline it unless hardware is missing |
| indirect call predictor. */ |
| if (!anticipate_inlining && !target->local) |
| return false; |
| /* For overwritable targets there is not much to do. */ |
| if (!can_inline_edge_p (e, false) |
| || !can_inline_edge_by_limits_p (e, false, true)) |
| return false; |
| /* OK, speculation seems interesting. */ |
| return true; |
| } |
| |
| /* We know that EDGE is not going to be inlined. |
| See if we can remove speculation. */ |
| |
| static void |
| resolve_noninline_speculation (edge_heap_t *edge_heap, struct cgraph_edge *edge) |
| { |
| if (edge->speculative && !speculation_useful_p (edge, false)) |
| { |
| struct cgraph_node *node = edge->caller; |
| struct cgraph_node *where = node->inlined_to |
| ? node->inlined_to : node; |
| auto_bitmap updated_nodes; |
| |
| if (edge->count.ipa ().initialized_p ()) |
| spec_rem += edge->count.ipa (); |
| cgraph_edge::resolve_speculation (edge); |
| reset_edge_caches (where); |
| ipa_update_overall_fn_summary (where); |
| update_caller_keys (edge_heap, where, |
| updated_nodes, NULL); |
| update_callee_keys (edge_heap, where, NULL, |
| updated_nodes); |
| } |
| } |
| |
| /* Return true if NODE should be accounted for overall size estimate. |
| Skip all nodes optimized for size so we can measure the growth of hot |
| part of program no matter of the padding. */ |
| |
| bool |
| inline_account_function_p (struct cgraph_node *node) |
| { |
| return (!DECL_EXTERNAL (node->decl) |
| && !opt_for_fn (node->decl, optimize_size) |
| && node->frequency != NODE_FREQUENCY_UNLIKELY_EXECUTED); |
| } |
| |
| /* Count number of callers of NODE and store it into DATA (that |
| points to int. Worker for cgraph_for_node_and_aliases. */ |
| |
| static bool |
| sum_callers (struct cgraph_node *node, void *data) |
| { |
| struct cgraph_edge *e; |
| int *num_calls = (int *)data; |
| |
| for (e = node->callers; e; e = e->next_caller) |
| (*num_calls)++; |
| return false; |
| } |
| |
| /* We only propagate across edges with non-interposable callee. */ |
| |
| inline bool |
| ignore_edge_p (struct cgraph_edge *e) |
| { |
| enum availability avail; |
| e->callee->function_or_virtual_thunk_symbol (&avail, e->caller); |
| return (avail <= AVAIL_INTERPOSABLE); |
| } |
| |
| /* We use greedy algorithm for inlining of small functions: |
| All inline candidates are put into prioritized heap ordered in |
| increasing badness. |
| |
| The inlining of small functions is bounded by unit growth parameters. */ |
| |
| static void |
| inline_small_functions (void) |
| { |
| struct cgraph_node *node; |
| struct cgraph_edge *edge; |
| edge_heap_t edge_heap (sreal::min ()); |
| auto_bitmap updated_nodes; |
| int min_size; |
| auto_vec<cgraph_edge *> new_indirect_edges; |
| int initial_size = 0; |
| struct cgraph_node **order = XCNEWVEC (cgraph_node *, symtab->cgraph_count); |
| struct cgraph_edge_hook_list *edge_removal_hook_holder; |
| new_indirect_edges.create (8); |
| |
| edge_removal_hook_holder |
| = symtab->add_edge_removal_hook (&heap_edge_removal_hook, &edge_heap); |
| |
| /* Compute overall unit size and other global parameters used by badness |
| metrics. */ |
| |
| max_count = profile_count::uninitialized (); |
| ipa_reduced_postorder (order, true, ignore_edge_p); |
| free (order); |
| |
| FOR_EACH_DEFINED_FUNCTION (node) |
| if (!node->inlined_to) |
| { |
| if (!node->alias && node->analyzed |
| && (node->has_gimple_body_p () || node->thunk) |
| && opt_for_fn (node->decl, optimize)) |
| { |
| class ipa_fn_summary *info = ipa_fn_summaries->get (node); |
| struct ipa_dfs_info *dfs = (struct ipa_dfs_info *) node->aux; |
| |
| /* Do not account external functions, they will be optimized out |
| if not inlined. Also only count the non-cold portion of program. */ |
| if (inline_account_function_p (node)) |
| initial_size += ipa_size_summaries->get (node)->size; |
| info->growth = estimate_growth (node); |
| |
| int num_calls = 0; |
| node->call_for_symbol_and_aliases (sum_callers, &num_calls, |
| true); |
| if (num_calls == 1) |
| info->single_caller = true; |
| if (dfs && dfs->next_cycle) |
| { |
| struct cgraph_node *n2; |
| int id = dfs->scc_no + 1; |
| for (n2 = node; n2; |
| n2 = ((struct ipa_dfs_info *) n2->aux)->next_cycle) |
| if (opt_for_fn (n2->decl, optimize)) |
| { |
| ipa_fn_summary *info2 = ipa_fn_summaries->get |
| (n2->inlined_to ? n2->inlined_to : n2); |
| if (info2->scc_no) |
| break; |
| info2->scc_no = id; |
| } |
| } |
| } |
| |
| for (edge = node->callers; edge; edge = edge->next_caller) |
| max_count = max_count.max (edge->count.ipa ()); |
| } |
| ipa_free_postorder_info (); |
| initialize_growth_caches (); |
| |
| if (dump_file) |
| fprintf (dump_file, |
| "\nDeciding on inlining of small functions. Starting with size %i.\n", |
| initial_size); |
| |
| overall_size = initial_size; |
| min_size = overall_size; |
| |
| /* Populate the heap with all edges we might inline. */ |
| |
| FOR_EACH_DEFINED_FUNCTION (node) |
| { |
| bool update = false; |
| struct cgraph_edge *next = NULL; |
| bool has_speculative = false; |
| |
| if (!opt_for_fn (node->decl, optimize)) |
| continue; |
| |
| if (dump_file) |
| fprintf (dump_file, "Enqueueing calls in %s.\n", node->dump_name ()); |
| |
| for (edge = node->callees; edge; edge = edge->next_callee) |
| { |
| if (edge->inline_failed |
| && !edge->aux |
| && can_inline_edge_p (edge, true) |
| && want_inline_small_function_p (edge, true) |
| && can_inline_edge_by_limits_p (edge, true) |
| && edge->inline_failed) |
| { |
| gcc_assert (!edge->aux); |
| update_edge_key (&edge_heap, edge); |
| } |
| if (edge->speculative) |
| has_speculative = true; |
| } |
| if (has_speculative) |
| for (edge = node->callees; edge; edge = next) |
| { |
| next = edge->next_callee; |
| if (edge->speculative |
| && !speculation_useful_p (edge, edge->aux != NULL)) |
| { |
| cgraph_edge::resolve_speculation (edge); |
| update = true; |
| } |
| } |
| if (update) |
| { |
| struct cgraph_node *where = node->inlined_to |
| ? node->inlined_to : node; |
| ipa_update_overall_fn_summary (where); |
| reset_edge_caches (where); |
| update_caller_keys (&edge_heap, where, |
| updated_nodes, NULL); |
| update_callee_keys (&edge_heap, where, NULL, |
| updated_nodes); |
| bitmap_clear (updated_nodes); |
| } |
| } |
| |
| gcc_assert (in_lto_p |
| || !(max_count > 0) |
| || (profile_info && flag_branch_probabilities)); |
| |
| while (!edge_heap.empty ()) |
| { |
| int old_size = overall_size; |
| struct cgraph_node *where, *callee; |
| sreal badness = edge_heap.min_key (); |
| sreal current_badness; |
| int growth; |
| |
| edge = edge_heap.extract_min (); |
| gcc_assert (edge->aux); |
| edge->aux = NULL; |
| if (!edge->inline_failed || !edge->callee->analyzed) |
| continue; |
| |
| /* Be sure that caches are maintained consistent. |
| This check is affected by scaling roundoff errors when compiling for |
| IPA this we skip it in that case. */ |
| if (flag_checking && !edge->callee->count.ipa_p () |
| && (!max_count.initialized_p () || !max_count.nonzero_p ())) |
| { |
| sreal cached_badness = edge_badness (edge, false); |
| |
| int old_size_est = estimate_edge_size (edge); |
| sreal old_time_est = estimate_edge_time (edge); |
| int old_hints_est = estimate_edge_hints (edge); |
| |
| if (edge_growth_cache != NULL) |
| edge_growth_cache->remove (edge); |
| reset_node_cache (edge->caller->inlined_to |
| ? edge->caller->inlined_to |
| : edge->caller); |
| gcc_assert (old_size_est == estimate_edge_size (edge)); |
| gcc_assert (old_time_est == estimate_edge_time (edge)); |
| /* FIXME: |
| |
| gcc_assert (old_hints_est == estimate_edge_hints (edge)); |
| |
| fails with profile feedback because some hints depends on |
| maybe_hot_edge_p predicate and because callee gets inlined to other |
| calls, the edge may become cold. |
| This ought to be fixed by computing relative probabilities |
| for given invocation but that will be better done once whole |
| code is converted to sreals. Disable for now and revert to "wrong" |
| value so enable/disable checking paths agree. */ |
| edge_growth_cache->get (edge)->hints = old_hints_est + 1; |
| |
| /* When updating the edge costs, we only decrease badness in the keys. |
| Increases of badness are handled lazily; when we see key with out |
| of date value on it, we re-insert it now. */ |
| current_badness = edge_badness (edge, false); |
| gcc_assert (cached_badness == current_badness); |
| gcc_assert (current_badness >= badness); |
| } |
| else |
| current_badness = edge_badness (edge, false); |
| if (current_badness != badness) |
| { |
| if (edge_heap.min () && current_badness > edge_heap.min_key ()) |
| { |
| edge->aux = edge_heap.insert (current_badness, edge); |
| continue; |
| } |
| else |
| badness = current_badness; |
| } |
| |
| if (!can_inline_edge_p (edge, true) |
| || !can_inline_edge_by_limits_p (edge, true)) |
| { |
| resolve_noninline_speculation (&edge_heap, edge); |
| continue; |
| } |
| |
| callee = edge->callee->ultimate_alias_target (); |
| growth = estimate_edge_growth (edge); |
| if (dump_file) |
| { |
| fprintf (dump_file, |
| "\nConsidering %s with %i size\n", |
| callee->dump_name (), |
| ipa_size_summaries->get (callee)->size); |
| fprintf (dump_file, |
| " to be inlined into %s in %s:%i\n" |
| " Estimated badness is %f, frequency %.2f.\n", |
| edge->caller->dump_name (), |
| edge->call_stmt |
| && (LOCATION_LOCUS (gimple_location ((const gimple *) |
| edge->call_stmt)) |
| > BUILTINS_LOCATION) |
| ? gimple_filename ((const gimple *) edge->call_stmt) |
| : "unknown", |
| edge->call_stmt |
| ? gimple_lineno ((const gimple *) edge->call_stmt) |
| : -1, |
| badness.to_double (), |
| edge->sreal_frequency ().to_double ()); |
| if (edge->count.ipa ().initialized_p ()) |
| { |
| fprintf (dump_file, " Called "); |
| edge->count.ipa ().dump (dump_file); |
| fprintf (dump_file, " times\n"); |
| } |
| if (dump_flags & TDF_DETAILS) |
| edge_badness (edge, true); |
| } |
| |
| where = edge->caller; |
| |
| if (overall_size + growth > compute_max_insns (where, min_size) |
| && !DECL_DISREGARD_INLINE_LIMITS (callee->decl)) |
| { |
| edge->inline_failed = CIF_INLINE_UNIT_GROWTH_LIMIT; |
| report_inline_failed_reason (edge); |
| resolve_noninline_speculation (&edge_heap, edge); |
| continue; |
| } |
| |
| if (!want_inline_small_function_p (edge, true)) |
| { |
| resolve_noninline_speculation (&edge_heap, edge); |
| continue; |
| } |
| |
| profile_count old_count = callee->count; |
| |
| /* Heuristics for inlining small functions work poorly for |
| recursive calls where we do effects similar to loop unrolling. |
| When inlining such edge seems profitable, leave decision on |
| specific inliner. */ |
| if (edge->recursive_p ()) |
| { |
| if (where->inlined_to) |
| where = where->inlined_to; |
| if (!recursive_inlining (edge, |
| opt_for_fn (edge->caller->decl, |
| flag_indirect_inlining) |
| ? &new_indirect_edges : NULL)) |
| { |
| edge->inline_failed = CIF_RECURSIVE_INLINING; |
| resolve_noninline_speculation (&edge_heap, edge); |
| continue; |
| } |
| reset_edge_caches (where); |
| /* Recursive inliner inlines all recursive calls of the function |
| at once. Consequently we need to update all callee keys. */ |
| if (opt_for_fn (edge->caller->decl, flag_indirect_inlining)) |
| add_new_edges_to_heap (&edge_heap, new_indirect_edges); |
| update_callee_keys (&edge_heap, where, where, updated_nodes); |
| bitmap_clear (updated_nodes); |
| } |
| else |
| { |
| struct cgraph_node *outer_node = NULL; |
| int depth = 0; |
| |
| /* Consider the case where self recursive function A is inlined |
| into B. This is desired optimization in some cases, since it |
| leads to effect similar of loop peeling and we might completely |
| optimize out the recursive call. However we must be extra |
| selective. */ |
| |
| where = edge->caller; |
| while (where->inlined_to) |
| { |
| if (where->decl == callee->decl) |
| outer_node = where, depth++; |
| where = where->callers->caller; |
| } |
| if (outer_node |
| && !want_inline_self_recursive_call_p (edge, outer_node, |
| true, depth)) |
| { |
| edge->inline_failed |
| = (DECL_DISREGARD_INLINE_LIMITS (edge->callee->decl) |
| ? CIF_RECURSIVE_INLINING : CIF_UNSPECIFIED); |
| resolve_noninline_speculation (&edge_heap, edge); |
| continue; |
| } |
| else if (depth && dump_file) |
| fprintf (dump_file, " Peeling recursion with depth %i\n", depth); |
| |
| gcc_checking_assert (!callee->inlined_to); |
| |
| int old_size = ipa_size_summaries->get (where)->size; |
| sreal old_time = ipa_fn_summaries->get (where)->time; |
| |
| inline_call (edge, true, &new_indirect_edges, &overall_size, true); |
| reset_edge_caches (edge->callee); |
| add_new_edges_to_heap (&edge_heap, new_indirect_edges); |
| |
| /* If caller's size and time increased we do not need to update |
| all edges because badness is not going to decrease. */ |
| if (old_size <= ipa_size_summaries->get (where)->size |
| && old_time <= ipa_fn_summaries->get (where)->time |
| /* Wrapper penalty may be non-monotonous in this respect. |
| Fortunately it only affects small functions. */ |
| && !wrapper_heuristics_may_apply (where, old_size)) |
| update_callee_keys (&edge_heap, edge->callee, edge->callee, |
| updated_nodes); |
| else |
| update_callee_keys (&edge_heap, where, |
| edge->callee, |
| updated_nodes); |
| } |
| where = edge->caller; |
| if (where->inlined_to) |
| where = where->inlined_to; |
| |
| /* Our profitability metric can depend on local properties |
| such as number of inlinable calls and size of the function body. |
| After inlining these properties might change for the function we |
| inlined into (since it's body size changed) and for the functions |
| called by function we inlined (since number of it inlinable callers |
| might change). */ |
| update_caller_keys (&edge_heap, where, updated_nodes, NULL); |
| /* Offline copy count has possibly changed, recompute if profile is |
| available. */ |
| struct cgraph_node *n |
| = cgraph_node::get (edge->callee->decl)->ultimate_alias_target (); |
| if (n != edge->callee && n->analyzed && !(n->count == old_count) |
| && n->count.ipa_p ()) |
| update_callee_keys (&edge_heap, n, NULL, updated_nodes); |
| bitmap_clear (updated_nodes); |
| |
| if (dump_enabled_p ()) |
| { |
| ipa_fn_summary *s = ipa_fn_summaries->get (where); |
| |
| /* dump_printf can't handle %+i. */ |
| char buf_net_change[100]; |
| snprintf (buf_net_change, sizeof buf_net_change, "%+i", |
| overall_size - old_size); |
| |
| dump_printf_loc (MSG_OPTIMIZED_LOCATIONS, edge->call_stmt, |
| " Inlined %C into %C which now has time %f and " |
| "size %i, net change of %s%s.\n", |
| edge->callee, edge->caller, |
| s->time.to_double (), |
| ipa_size_summaries->get (edge->caller)->size, |
| buf_net_change, |
| cross_module_call_p (edge) ? " (cross module)":""); |
| } |
| if (min_size > overall_size) |
| { |
| min_size = overall_size; |
| |
| if (dump_file) |
| fprintf (dump_file, "New minimal size reached: %i\n", min_size); |
| } |
| } |
| |
| free_growth_caches (); |
| if (dump_enabled_p ()) |
| dump_printf (MSG_NOTE, |
| "Unit growth for small function inlining: %i->%i (%i%%)\n", |
| initial_size, overall_size, |
| initial_size ? overall_size * 100 / (initial_size) - 100: 0); |
| symtab->remove_edge_removal_hook (edge_removal_hook_holder); |
| } |
| |
| /* Flatten NODE. Performed both during early inlining and |
| at IPA inlining time. */ |
| |
| static void |
| flatten_function (struct cgraph_node *node, bool early, bool update) |
| { |
| struct cgraph_edge *e; |
| |
| /* We shouldn't be called recursively when we are being processed. */ |
| gcc_assert (node->aux == NULL); |
| |
| node->aux = (void *) node; |
| |
| for (e = node->callees; e; e = e->next_callee) |
| { |
| struct cgraph_node *orig_callee; |
| struct cgraph_node *callee = e->callee->ultimate_alias_target (); |
| |
| /* We've hit cycle? It is time to give up. */ |
| if (callee->aux) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, e->call_stmt, |
| "Not inlining %C into %C to avoid cycle.\n", |
| callee, e->caller); |
| if (cgraph_inline_failed_type (e->inline_failed) != CIF_FINAL_ERROR) |
| e->inline_failed = CIF_RECURSIVE_INLINING; |
| continue; |
| } |
| |
| /* When the edge is already inlined, we just need to recurse into |
| it in order to fully flatten the leaves. */ |
| if (!e->inline_failed) |
| { |
| flatten_function (callee, early, false); |
| continue; |
| } |
| |
| /* Flatten attribute needs to be processed during late inlining. For |
| extra code quality we however do flattening during early optimization, |
| too. */ |
| if (!early |
| ? !can_inline_edge_p (e, true) |
| && !can_inline_edge_by_limits_p (e, true) |
| : !can_early_inline_edge_p (e)) |
| continue; |
| |
| if (e->recursive_p ()) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, e->call_stmt, |
| "Not inlining: recursive call.\n"); |
| continue; |
| } |
| |
| if (gimple_in_ssa_p (DECL_STRUCT_FUNCTION (node->decl)) |
| != gimple_in_ssa_p (DECL_STRUCT_FUNCTION (callee->decl))) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, e->call_stmt, |
| "Not inlining: SSA form does not match.\n"); |
| continue; |
| } |
| |
| /* Inline the edge and flatten the inline clone. Avoid |
| recursing through the original node if the node was cloned. */ |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_OPTIMIZED_LOCATIONS, e->call_stmt, |
| " Inlining %C into %C.\n", |
| callee, e->caller); |
| orig_callee = callee; |
| inline_call (e, true, NULL, NULL, false); |
| if (e->callee != orig_callee) |
| orig_callee->aux = (void *) node; |
| flatten_function (e->callee, early, false); |
| if (e->callee != orig_callee) |
| orig_callee->aux = NULL; |
| } |
| |
| node->aux = NULL; |
| cgraph_node *where = node->inlined_to ? node->inlined_to : node; |
| if (update && opt_for_fn (where->decl, optimize)) |
| ipa_update_overall_fn_summary (where); |
| } |
| |
| /* Inline NODE to all callers. Worker for cgraph_for_node_and_aliases. |
| DATA points to number of calls originally found so we avoid infinite |
| recursion. */ |
| |
| static bool |
| inline_to_all_callers_1 (struct cgraph_node *node, void *data, |
| hash_set<cgraph_node *> *callers) |
| { |
| int *num_calls = (int *)data; |
| bool callee_removed = false; |
| |
| while (node->callers && !node->inlined_to) |
| { |
| struct cgraph_node *caller = node->callers->caller; |
| |
| if (!can_inline_edge_p (node->callers, true) |
| || !can_inline_edge_by_limits_p (node->callers, true) |
| || node->callers->recursive_p ()) |
| { |
| if (dump_file) |
| fprintf (dump_file, "Uninlinable call found; giving up.\n"); |
| *num_calls = 0; |
| return false; |
| } |
| |
| if (dump_file) |
| { |
| cgraph_node *ultimate = node->ultimate_alias_target (); |
| fprintf (dump_file, |
| "\nInlining %s size %i.\n", |
| ultimate->dump_name (), |
| ipa_size_summaries->get (ultimate)->size); |
| fprintf (dump_file, |
| " Called once from %s %i insns.\n", |
| node->callers->caller->dump_name (), |
| ipa_size_summaries->get (node->callers->caller)->size); |
| } |
| |
| /* Remember which callers we inlined to, delaying updating the |
| overall summary. */ |
| callers->add (node->callers->caller); |
| inline_call (node->callers, true, NULL, NULL, false, &callee_removed); |
| if (dump_file) |
| fprintf (dump_file, |
| " Inlined into %s which now has %i size\n", |
| caller->dump_name (), |
| ipa_size_summaries->get (caller)->size); |
| if (!(*num_calls)--) |
| { |
| if (dump_file) |
| fprintf (dump_file, "New calls found; giving up.\n"); |
| return callee_removed; |
| } |
| if (callee_removed) |
| return true; |
| } |
| return false; |
| } |
| |
| /* Wrapper around inline_to_all_callers_1 doing delayed overall summary |
| update. */ |
| |
| static bool |
| inline_to_all_callers (struct cgraph_node *node, void *data) |
| { |
| hash_set<cgraph_node *> callers; |
| bool res = inline_to_all_callers_1 (node, data, &callers); |
| /* Perform the delayed update of the overall summary of all callers |
| processed. This avoids quadratic behavior in the cases where |
| we have a lot of calls to the same function. */ |
| for (hash_set<cgraph_node *>::iterator i = callers.begin (); |
| i != callers.end (); ++i) |
| ipa_update_overall_fn_summary ((*i)->inlined_to ? (*i)->inlined_to : *i); |
| return res; |
| } |
| |
| /* Output overall time estimate. */ |
| static void |
| dump_overall_stats (void) |
| { |
| sreal sum_weighted = 0, sum = 0; |
| struct cgraph_node *node; |
| |
| FOR_EACH_DEFINED_FUNCTION (node) |
| if (!node->inlined_to |
| && !node->alias) |
| { |
| ipa_fn_summary *s = ipa_fn_summaries->get (node); |
| if (s != NULL) |
| { |
| sum += s->time; |
| if (node->count.ipa ().initialized_p ()) |
| sum_weighted += s->time * node->count.ipa ().to_gcov_type (); |
| } |
| } |
| fprintf (dump_file, "Overall time estimate: " |
| "%f weighted by profile: " |
| "%f\n", sum.to_double (), sum_weighted.to_double ()); |
| } |
| |
| /* Output some useful stats about inlining. */ |
| |
| static void |
| dump_inline_stats (void) |
| { |
| int64_t inlined_cnt = 0, inlined_indir_cnt = 0; |
| int64_t inlined_virt_cnt = 0, inlined_virt_indir_cnt = 0; |
| int64_t noninlined_cnt = 0, noninlined_indir_cnt = 0; |
| int64_t noninlined_virt_cnt = 0, noninlined_virt_indir_cnt = 0; |
| int64_t inlined_speculative = 0, inlined_speculative_ply = 0; |
| int64_t indirect_poly_cnt = 0, indirect_cnt = 0; |
| int64_t reason[CIF_N_REASONS][2]; |
| sreal reason_freq[CIF_N_REASONS]; |
| int i; |
| struct cgraph_node *node; |
| |
| memset (reason, 0, sizeof (reason)); |
| for (i=0; i < CIF_N_REASONS; i++) |
| reason_freq[i] = 0; |
| FOR_EACH_DEFINED_FUNCTION (node) |
| { |
| struct cgraph_edge *e; |
| for (e = node->callees; e; e = e->next_callee) |
| { |
| if (e->inline_failed) |
| { |
| if (e->count.ipa ().initialized_p ()) |
| reason[(int) e->inline_failed][0] += e->count.ipa ().to_gcov_type (); |
| reason_freq[(int) e->inline_failed] += e->sreal_frequency (); |
| reason[(int) e->inline_failed][1] ++; |
| if (DECL_VIRTUAL_P (e->callee->decl) |
| && e->count.ipa ().initialized_p ()) |
| { |
| if (e->indirect_inlining_edge) |
| noninlined_virt_indir_cnt += e->count.ipa ().to_gcov_type (); |
| else |
| noninlined_virt_cnt += e->count.ipa ().to_gcov_type (); |
| } |
| else if (e->count.ipa ().initialized_p ()) |
| { |
| if (e->indirect_inlining_edge) |
| noninlined_indir_cnt += e->count.ipa ().to_gcov_type (); |
| else |
| noninlined_cnt += e->count.ipa ().to_gcov_type (); |
| } |
| } |
| else if (e->count.ipa ().initialized_p ()) |
| { |
| if (e->speculative) |
| { |
| if (DECL_VIRTUAL_P (e->callee->decl)) |
| inlined_speculative_ply += e->count.ipa ().to_gcov_type (); |
| else |
| inlined_speculative += e->count.ipa ().to_gcov_type (); |
| } |
| else if (DECL_VIRTUAL_P (e->callee->decl)) |
| { |
| if (e->indirect_inlining_edge) |
| inlined_virt_indir_cnt += e->count.ipa ().to_gcov_type (); |
| else |
| inlined_virt_cnt += e->count.ipa ().to_gcov_type (); |
| } |
| else |
| { |
| if (e->indirect_inlining_edge) |
| inlined_indir_cnt += e->count.ipa ().to_gcov_type (); |
| else |
| inlined_cnt += e->count.ipa ().to_gcov_type (); |
| } |
| } |
| } |
| for (e = node->indirect_calls; e; e = e->next_callee) |
| if (e->indirect_info->polymorphic |
| & e->count.ipa ().initialized_p ()) |
| indirect_poly_cnt += e->count.ipa ().to_gcov_type (); |
| else if (e->count.ipa ().initialized_p ()) |
| indirect_cnt += e->count.ipa ().to_gcov_type (); |
| } |
| if (max_count.initialized_p ()) |
| { |
| fprintf (dump_file, |
| "Inlined %" PRId64 " + speculative " |
| "%" PRId64 " + speculative polymorphic " |
| "%" PRId64 " + previously indirect " |
| "%" PRId64 " + virtual " |
| "%" PRId64 " + virtual and previously indirect " |
| "%" PRId64 "\n" "Not inlined " |
| "%" PRId64 " + previously indirect " |
| "%" PRId64 " + virtual " |
| "%" PRId64 " + virtual and previously indirect " |
| "%" PRId64 " + still indirect " |
| "%" PRId64 " + still indirect polymorphic " |
| "%" PRId64 "\n", inlined_cnt, |
| inlined_speculative, inlined_speculative_ply, |
| inlined_indir_cnt, inlined_virt_cnt, inlined_virt_indir_cnt, |
| noninlined_cnt, noninlined_indir_cnt, noninlined_virt_cnt, |
| noninlined_virt_indir_cnt, indirect_cnt, indirect_poly_cnt); |
| fprintf (dump_file, "Removed speculations "); |
| spec_rem.dump (dump_file); |
| fprintf (dump_file, "\n"); |
| } |
| dump_overall_stats (); |
| fprintf (dump_file, "\nWhy inlining failed?\n"); |
| for (i = 0; i < CIF_N_REASONS; i++) |
| if (reason[i][1]) |
| fprintf (dump_file, "%-50s: %8i calls, %8f freq, %" PRId64" count\n", |
| cgraph_inline_failed_string ((cgraph_inline_failed_t) i), |
| (int) reason[i][1], reason_freq[i].to_double (), reason[i][0]); |
| } |
| |
| /* Called when node is removed. */ |
| |
| static void |
| flatten_remove_node_hook (struct cgraph_node *node, void *data) |
| { |
| if (lookup_attribute ("flatten", DECL_ATTRIBUTES (node->decl)) == NULL) |
| return; |
| |
| hash_set<struct cgraph_node *> *removed |
| = (hash_set<struct cgraph_node *> *) data; |
| removed->add (node); |
| } |
| |
| /* Decide on the inlining. We do so in the topological order to avoid |
| expenses on updating data structures. */ |
| |
| static unsigned int |
| ipa_inline (void) |
| { |
| struct cgraph_node *node; |
| int nnodes; |
| struct cgraph_node **order; |
| int i, j; |
| int cold; |
| bool remove_functions = false; |
| |
| order = XCNEWVEC (struct cgraph_node *, symtab->cgraph_count); |
| |
| if (dump_file) |
| ipa_dump_fn_summaries (dump_file); |
| |
| nnodes = ipa_reverse_postorder (order); |
| spec_rem = profile_count::zero (); |
| |
| FOR_EACH_FUNCTION (node) |
| { |
| node->aux = 0; |
| |
| /* Recompute the default reasons for inlining because they may have |
| changed during merging. */ |
| if (in_lto_p) |
| { |
| for (cgraph_edge *e = node->callees; e; e = e->next_callee) |
| { |
| gcc_assert (e->inline_failed); |
| initialize_inline_failed (e); |
| } |
| for (cgraph_edge *e = node->indirect_calls; e; e = e->next_callee) |
| initialize_inline_failed (e); |
| } |
| } |
| |
| if (dump_file) |
| fprintf (dump_file, "\nFlattening functions:\n"); |
| |
| /* First shrink order array, so that it only contains nodes with |
| flatten attribute. */ |
| for (i = nnodes - 1, j = i; i >= 0; i--) |
| { |
| node = order[i]; |
| if (node->definition |
| /* Do not try to flatten aliases. These may happen for example when |
| creating local aliases. */ |
| && !node->alias |
| && lookup_attribute ("flatten", |
| DECL_ATTRIBUTES (node->decl)) != NULL) |
| order[j--] = order[i]; |
| } |
| |
| /* After the above loop, order[j + 1] ... order[nnodes - 1] contain |
| nodes with flatten attribute. If there is more than one such |
| node, we need to register a node removal hook, as flatten_function |
| could remove other nodes with flatten attribute. See PR82801. */ |
| struct cgraph_node_hook_list *node_removal_hook_holder = NULL; |
| hash_set<struct cgraph_node *> *flatten_removed_nodes = NULL; |
| if (j < nnodes - 2) |
| { |
| flatten_removed_nodes = new hash_set<struct cgraph_node *>; |
| node_removal_hook_holder |
| = symtab->add_cgraph_removal_hook (&flatten_remove_node_hook, |
| flatten_removed_nodes); |
| } |
| |
| /* In the first pass handle functions to be flattened. Do this with |
| a priority so none of our later choices will make this impossible. */ |
| for (i = nnodes - 1; i > j; i--) |
| { |
| node = order[i]; |
| if (flatten_removed_nodes |
| && flatten_removed_nodes->contains (node)) |
| continue; |
| |
| /* Handle nodes to be flattened. |
| Ideally when processing callees we stop inlining at the |
| entry of cycles, possibly cloning that entry point and |
| try to flatten itself turning it into a self-recursive |
| function. */ |
| if (dump_file) |
| fprintf (dump_file, "Flattening %s\n", node->dump_name ()); |
| flatten_function (node, false, true); |
| } |
| |
| if (j < nnodes - 2) |
| { |
| symtab->remove_cgraph_removal_hook (node_removal_hook_holder); |
| delete flatten_removed_nodes; |
| } |
| free (order); |
| |
| if (dump_file) |
| dump_overall_stats (); |
| |
| inline_small_functions (); |
| |
| gcc_assert (symtab->state == IPA_SSA); |
| symtab->state = IPA_SSA_AFTER_INLINING; |
| /* Do first after-inlining removal. We want to remove all "stale" extern |
| inline functions and virtual functions so we really know what is called |
| once. */ |
| symtab->remove_unreachable_nodes (dump_file); |
| |
| /* Inline functions with a property that after inlining into all callers the |
| code size will shrink because the out-of-line copy is eliminated. |
| We do this regardless on the callee size as long as function growth limits |
| are met. */ |
| if (dump_file) |
| fprintf (dump_file, |
| "\nDeciding on functions to be inlined into all callers and " |
| "removing useless speculations:\n"); |
| |
| /* Inlining one function called once has good chance of preventing |
| inlining other function into the same callee. Ideally we should |
| work in priority order, but probably inlining hot functions first |
| is good cut without the extra pain of maintaining the queue. |
| |
| ??? this is not really fitting the bill perfectly: inlining function |
| into callee often leads to better optimization of callee due to |
| increased context for optimization. |
| For example if main() function calls a function that outputs help |
| and then function that does the main optimization, we should inline |
| the second with priority even if both calls are cold by themselves. |
| |
| We probably want to implement new predicate replacing our use of |
| maybe_hot_edge interpreted as maybe_hot_edge || callee is known |
| to be hot. */ |
| for (cold = 0; cold <= 1; cold ++) |
| { |
| FOR_EACH_DEFINED_FUNCTION (node) |
| { |
| struct cgraph_edge *edge, *next; |
| bool update=false; |
| |
| if (!opt_for_fn (node->decl, optimize) |
| || !opt_for_fn (node->decl, flag_inline_functions_called_once)) |
| continue; |
| |
| for (edge = node->callees; edge; edge = next) |
| { |
| next = edge->next_callee; |
| if (edge->speculative && !speculation_useful_p (edge, false)) |
| { |
| if (edge->count.ipa ().initialized_p ()) |
| spec_rem += edge->count.ipa (); |
| cgraph_edge::resolve_speculation (edge); |
| update = true; |
| remove_functions = true; |
| } |
| } |
| if (update) |
| { |
| struct cgraph_node *where = node->inlined_to |
| ? node->inlined_to : node; |
| reset_edge_caches (where); |
| ipa_update_overall_fn_summary (where); |
| } |
| if (want_inline_function_to_all_callers_p (node, cold)) |
| { |
| int num_calls = 0; |
| node->call_for_symbol_and_aliases (sum_callers, &num_calls, |
| true); |
| while (node->call_for_symbol_and_aliases |
| (inline_to_all_callers, &num_calls, true)) |
| ; |
| remove_functions = true; |
| } |
| } |
| } |
| |
| if (dump_enabled_p ()) |
| dump_printf (MSG_NOTE, |
| "\nInlined %i calls, eliminated %i functions\n\n", |
| ncalls_inlined, nfunctions_inlined); |
| if (dump_file) |
| dump_inline_stats (); |
| |
| if (dump_file) |
| ipa_dump_fn_summaries (dump_file); |
| return remove_functions ? TODO_remove_functions : 0; |
| } |
| |
| /* Inline always-inline function calls in NODE. */ |
| |
| static bool |
| inline_always_inline_functions (struct cgraph_node *node) |
| { |
| struct cgraph_edge *e; |
| bool inlined = false; |
| |
| for (e = node->callees; e; e = e->next_callee) |
| { |
| struct cgraph_node *callee = e->callee->ultimate_alias_target (); |
| if (!DECL_DISREGARD_INLINE_LIMITS (callee->decl)) |
| continue; |
| |
| if (e->recursive_p ()) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, e->call_stmt, |
| " Not inlining recursive call to %C.\n", |
| e->callee); |
| e->inline_failed = CIF_RECURSIVE_INLINING; |
| continue; |
| } |
| |
| if (!can_early_inline_edge_p (e)) |
| { |
| /* Set inlined to true if the callee is marked "always_inline" but |
| is not inlinable. This will allow flagging an error later in |
| expand_call_inline in tree-inline.c. */ |
| if (lookup_attribute ("always_inline", |
| DECL_ATTRIBUTES (callee->decl)) != NULL) |
| inlined = true; |
| continue; |
| } |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_OPTIMIZED_LOCATIONS, e->call_stmt, |
| " Inlining %C into %C (always_inline).\n", |
| e->callee, e->caller); |
| inline_call (e, true, NULL, NULL, false); |
| inlined = true; |
| } |
| if (inlined) |
| ipa_update_overall_fn_summary (node); |
| |
| return inlined; |
| } |
| |
| /* Decide on the inlining. We do so in the topological order to avoid |
| expenses on updating data structures. */ |
| |
| static bool |
| early_inline_small_functions (struct cgraph_node *node) |
| { |
| struct cgraph_edge *e; |
| bool inlined = false; |
| |
| for (e = node->callees; e; e = e->next_callee) |
| { |
| struct cgraph_node *callee = e->callee->ultimate_alias_target (); |
| |
| /* We can encounter not-yet-analyzed function during |
| early inlining on callgraphs with strongly |
| connected components. */ |
| ipa_fn_summary *s = ipa_fn_summaries->get (callee); |
| if (s == NULL || !s->inlinable || !e->inline_failed) |
| continue; |
| |
| /* Do not consider functions not declared inline. */ |
| if (!DECL_DECLARED_INLINE_P (callee->decl) |
| && !opt_for_fn (node->decl, flag_inline_small_functions) |
| && !opt_for_fn (node->decl, flag_inline_functions)) |
| continue; |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, e->call_stmt, |
| "Considering inline candidate %C.\n", |
| callee); |
| |
| if (!can_early_inline_edge_p (e)) |
| continue; |
| |
| if (e->recursive_p ()) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, e->call_stmt, |
| " Not inlining: recursive call.\n"); |
| continue; |
| } |
| |
| if (!want_early_inline_function_p (e)) |
| continue; |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_OPTIMIZED_LOCATIONS, e->call_stmt, |
| " Inlining %C into %C.\n", |
| callee, e->caller); |
| inline_call (e, true, NULL, NULL, false); |
| inlined = true; |
| } |
| |
| if (inlined) |
| ipa_update_overall_fn_summary (node); |
| |
| return inlined; |
| } |
| |
| unsigned int |
| early_inliner (function *fun) |
| { |
| struct cgraph_node *node = cgraph_node::get (current_function_decl); |
| struct cgraph_edge *edge; |
| unsigned int todo = 0; |
| int iterations = 0; |
| bool inlined = false; |
| |
| if (seen_error ()) |
| return 0; |
| |
| /* Do nothing if datastructures for ipa-inliner are already computed. This |
| happens when some pass decides to construct new function and |
| cgraph_add_new_function calls lowering passes and early optimization on |
| it. This may confuse ourself when early inliner decide to inline call to |
| function clone, because function clones don't have parameter list in |
| ipa-prop matching their signature. */ |
| if (ipa_node_params_sum) |
| return 0; |
| |
| if (flag_checking) |
| node->verify (); |
| node->remove_all_references (); |
| |
| /* Even when not optimizing or not inlining inline always-inline |
| functions. */ |
| inlined = inline_always_inline_functions (node); |
| |
| if (!optimize |
| || flag_no_inline |
| || !flag_early_inlining |
| /* Never inline regular functions into always-inline functions |
| during incremental inlining. This sucks as functions calling |
| always inline functions will get less optimized, but at the |
| same time inlining of functions calling always inline |
| function into an always inline function might introduce |
| cycles of edges to be always inlined in the callgraph. |
| |
| We might want to be smarter and just avoid this type of inlining. */ |
| || (DECL_DISREGARD_INLINE_LIMITS (node->decl) |
| && lookup_attribute ("always_inline", |
| DECL_ATTRIBUTES (node->decl)))) |
| ; |
| else if (lookup_attribute ("flatten", |
| DECL_ATTRIBUTES (node->decl)) != NULL) |
| { |
| /* When the function is marked to be flattened, recursively inline |
| all calls in it. */ |
| if (dump_enabled_p ()) |
| dump_printf (MSG_OPTIMIZED_LOCATIONS, |
| "Flattening %C\n", node); |
| flatten_function (node, true, true); |
| inlined = true; |
| } |
| else |
| { |
| /* If some always_inline functions was inlined, apply the changes. |
| This way we will not account always inline into growth limits and |
| moreover we will inline calls from always inlines that we skipped |
| previously because of conditional above. */ |
| if (inlined) |
| { |
| timevar_push (TV_INTEGRATION); |
| todo |= optimize_inline_calls (current_function_decl); |
| /* optimize_inline_calls call above might have introduced new |
| statements that don't have inline parameters computed. */ |
| for (edge = node->callees; edge; edge = edge->next_callee) |
| { |
| /* We can enounter not-yet-analyzed function during |
| early inlining on callgraphs with strongly |
| connected components. */ |
| ipa_call_summary *es = ipa_call_summaries->get_create (edge); |
| es->call_stmt_size |
| = estimate_num_insns (edge->call_stmt, &eni_size_weights); |
| es->call_stmt_time |
| = estimate_num_insns (edge->call_stmt, &eni_time_weights); |
| } |
| ipa_update_overall_fn_summary (node); |
| inlined = false; |
| timevar_pop (TV_INTEGRATION); |
| } |
| /* We iterate incremental inlining to get trivial cases of indirect |
| inlining. */ |
| while (iterations < opt_for_fn (node->decl, |
| param_early_inliner_max_iterations) |
| && early_inline_small_functions (node)) |
| { |
| timevar_push (TV_INTEGRATION); |
| todo |= optimize_inline_calls (current_function_decl); |
| |
| /* Technically we ought to recompute inline parameters so the new |
| iteration of early inliner works as expected. We however have |
| values approximately right and thus we only need to update edge |
| info that might be cleared out for newly discovered edges. */ |
| for (edge = node->callees; edge; edge = edge->next_callee) |
| { |
| /* We have no summary for new bound store calls yet. */ |
| ipa_call_summary *es = ipa_call_summaries->get_create (edge); |
| es->call_stmt_size |
| = estimate_num_insns (edge->call_stmt, &eni_size_weights); |
| es->call_stmt_time |
| = estimate_num_insns (edge->call_stmt, &eni_time_weights); |
| } |
| if (iterations < opt_for_fn (node->decl, |
| param_early_inliner_max_iterations) - 1) |
| ipa_update_overall_fn_summary (node); |
| timevar_pop (TV_INTEGRATION); |
| iterations++; |
| inlined = false; |
| } |
| if (dump_file) |
| fprintf (dump_file, "Iterations: %i\n", iterations); |
| } |
| |
| if (inlined) |
| { |
| timevar_push (TV_INTEGRATION); |
| todo |= optimize_inline_calls (current_function_decl); |
| timevar_pop (TV_INTEGRATION); |
| } |
| |
| fun->always_inline_functions_inlined = true; |
| |
| return todo; |
| } |
| |
| /* Do inlining of small functions. Doing so early helps profiling and other |
| passes to be somewhat more effective and avoids some code duplication in |
| later real inlining pass for testcases with very many function calls. */ |
| |
| namespace { |
| |
| const pass_data pass_data_early_inline = |
| { |
| GIMPLE_PASS, /* type */ |
| "einline", /* name */ |
| OPTGROUP_INLINE, /* optinfo_flags */ |
| TV_EARLY_INLINING, /* tv_id */ |
| PROP_ssa, /* properties_required */ |
|
|