| 2023-05-08 Release Manager |
| |
| * GCC 12.3.0 released. |
| |
| 2022-08-19 Release Manager |
| |
| * GCC 12.2.0 released. |
| |
| 2022-05-06 Release Manager |
| |
| * GCC 12.1.0 released. |
| |
| 2021-10-22 Eric Gallager <egallager@gcc.gnu.org> |
| |
| PR other/102663 |
| * Makefile.in: Add dummy install-dvi target. |
| |
| 2020-01-24 Maciej W. Rozycki <macro@wdc.com> |
| |
| * Makefile.in (configure_deps): Add `toolexeclibdir.m4'. |
| * configure.ac: Handle `--with-toolexeclibdir='. |
| * configure: Regenerate. |
| |
| 2020-01-01 Jakub Jelinek <jakub@redhat.com> |
| |
| Update copyright years. |
| |
| 2019-10-01 Maciej W. Rozycki <macro@wdc.com> |
| |
| * Makefile.in (toolexecdir, toolexeclibdir): New variables. |
| (LIBADA_FLAGS_TO_PASS): Add `toolexeclibdir'. |
| * configure.ac: Add `--enable-version-specific-runtime-libs'. |
| Update version-specific `toolexecdir' and `toolexeclibdir' from |
| ADA_RTL_OBJ_DIR from gcc/ada/gcc-interface/Makefile.in. |
| * configure: Regenerate. |
| |
| 2019-01-01 Jakub Jelinek <jakub@redhat.com> |
| |
| Update copyright years. |
| |
| 2018-12-11 Eric Botcazou <ebotcazou@adacore.com> |
| |
| PR ada/88429 |
| * configure.ac (default_gnatlib_target): Set to gnatlib instead of |
| gnatlib-plain if --disable-shared. |
| * configure: Regenerate. |
| * Makefile.in (all): Replace gnatlib prerequisite with libada. |
| (ADA_RTS_SUBDIR): Delete. |
| (libada): New target, renamed from... |
| (gnatlib): ...this. Merge with other library targets. |
| (gnatlib-plain): Delete. |
| (install-gnatlib): Rename to... |
| (install-libada): ...this. |
| (install): Replace install-gnatlib prerequisite with install-libada. |
| |
| 2018-10-31 Joseph Myers <joseph@codesourcery.com> |
| |
| PR bootstrap/82856 |
| * configure.ac: Remove AC_PREREQ. |
| * configure: Regenerate. |
| |
| 2018-04-18 David Malcolm <dmalcolm@redhat.com> |
| |
| PR jit/85384 |
| * configure: Regenerate. |
| |
| 2018-01-03 Jakub Jelinek <jakub@redhat.com> |
| |
| Update copyright years. |
| |
| 2017-06-01 Eric Botcazou <ebotcazou@adacore.com> |
| |
| PR ada/80921 |
| * configure.ac (default_gnatlib_target): Remove bogus condition. |
| (have_getipinfo): Tweak. |
| * configure: Regenerate. |
| |
| 2017-05-22 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * configure.ac: Add check for sys/capability.h header. |
| (have_capability): New substitution. |
| * configure: Regenerate. |
| * Makefile.in (GNATLIBCFLAGS_FOR_C): Add @have_capability@. |
| |
| 2017-01-17 Jakub Jelinek <jakub@redhat.com> |
| |
| PR other/79046 |
| * configure.ac: Add GCC_BASE_VER. |
| * Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get |
| version from BASE-VER file. |
| * configure: Regenerate. |
| |
| 2017-01-04 Alan Modra <amodra@gmail.com> |
| |
| * Makefile.in (configure_deps): Update and order as per |
| configure.ac sinclude. |
| * configure: Regenerate. |
| |
| 2017-01-01 Jakub Jelinek <jakub@redhat.com> |
| |
| Update copyright years. |
| |
| 2016-11-15 Matthias Klose <doko@ubuntu.com> |
| |
| * configure: Regenerate. |
| |
| 2016-04-30 Oleg Endo <olegendo@gcc.gnu.org> |
| |
| * configure: Remove SH5 support. |
| |
| 2016-01-04 Jakub Jelinek <jakub@redhat.com> |
| |
| Update copyright years. |
| |
| 2015-04-10 Jakub Jelinek <jakub@redhat.com> |
| Iain Sandoe <iain@codesourcery.com> |
| |
| PR target/65351 |
| * configure: Regenerate. |
| |
| 2015-04-07 Jakub Jelinek <jakub@redhat.com> |
| Iain Sandoe <iain@codesourcery.com> |
| |
| PR target/65351 |
| * configure: Regenerate. |
| |
| 2015-01-05 Jakub Jelinek <jakub@redhat.com> |
| |
| Update copyright years. |
| |
| 2014-08-12 Joel Sherrill <joel.sherrill@oarcorp.com> |
| |
| * Makefile.in: Add CFLAGS_FOR_TARGET to GNATLIBCFLAGS_FOR_C. |
| |
| 2014-01-02 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| Update copyright years |
| |
| 2013-11-15 Andreas Schwab <schwab@linux-m68k.org> |
| |
| * configure: Regenerate. |
| |
| 2013-03-27 Kai Tietz <ktietz@redhat.com> |
| |
| * configure: Regenerated. |
| |
| 2013-02-13 Kai Tietz <ktietz@redhat.com> |
| |
| PR target/52122 |
| * Makefile.in (LN_S_RECURSIVE): New. |
| (adainclude, adalib): Use LN_S_RECURSIVE for copy. |
| |
| 2013-01-14 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| Update copyright years. |
| |
| 2012-06-11 Olivier Hainque <hainque@adacore.com> |
| |
| * Makefile.in (GNATLIBCFLAGS_FOR_C): Remove $(PICFLAG). |
| |
| 2012-01-22 Douglas B Rupp <rupp@gnat.com> |
| |
| * configure: Regenerate. |
| |
| 2012-01-04 Andreas Krebbel <Andreas.Krebbel@de.ibm.com> |
| |
| * configure: Regenerate. |
| |
| 2011-11-12 Iain Sandoe <iains@gcc.gnu.org> |
| |
| * Makefile.in: Change dependency on oscons to depend on the generator |
| tool. |
| |
| 2011-10-12 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * Makefile.in (LOOSE_WARN): Delete. |
| (GCC_WARN_CFLAGS): Likewise. |
| (WARN_CFLAGS): Likewise. |
| (GNATLIBFLAGS): Add -nostdinc. |
| (GNATLIBCFLAGS_FOR_C): Add -W -Wall. |
| (LIBADA_FLAGS_TO_PASS): Remove WARN_CFLAGS. |
| * configure.ac (warn_cflags): Delete. |
| * configure: Regenerate. |
| |
| 2011-08-22 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE> |
| |
| * configure.ac: Include ../config/picflag.m4. |
| (GCC_PICFLAG): Call it. |
| Substitute. |
| * configure: Regenerate. |
| * Makefile.in (TARGET_LIBGCC2_CFLAGS): Replace by PICFLAG. |
| (GNATLIBCFLAGS_FOR_C): Replace TARGET_LIBGCC2_CFLAGS by PICFLAG. |
| (LIBADA_FLAGS_TO_PASS): Pass PICFLAG as PICFLAG_FOR_TARGET. |
| Don't include $(GCC_DIR)/libgcc.mvars. |
| |
| 2010-11-20 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| PR other/46202 |
| * Makefile.in (install-strip): New phony target. |
| (check, installcheck, info, dvi, pdf, html, install) |
| (install-info, install-pdf, install-html, mostlyclean) |
| (clean, distclean, maintainer-clean): Mark phony. |
| |
| 2009-10-24 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * Makefile.in (GNATLIBCFLAGS_FOR_C): New variable. |
| (LIBADA_FLAGS_TO_PASS): Add GNATLIBCFLAGS_FOR_C. |
| * configure.ac: Include config/unwind_ipinfo.m4. |
| Check for _Unwind_GetIPInfo. |
| * configure: Regenerate. |
| |
| 2009-08-30 Paolo Bonzini <bonzini@gnu.org> |
| |
| PR ada/41122 |
| * configure.ac: Add AC_PROG_AWK. Remove useless duplicate |
| call to AC_PROG_CC. |
| * configure: Regenerate. |
| * Makefile.in: Substitute AWK. |
| |
| 2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * configure.ac (AC_PREREQ): Bump to 2.64. |
| |
| 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * configure: Regenerate. |
| |
| 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * Makefile.in (AUTOCONF, configure_deps): New variables. |
| ($(srcdir)/configure)): Use them. Also depend on multi.m4. |
| |
| 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * configure.ac (_AC_ARG_VAR_PRECIOUS): Use m4_rename_force. |
| |
| 2009-07-13 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * configure.ac: Include multi.m4 and do not call AC_CANONICAL_SYSTEM. |
| * configure: Regenerate. |
| |
| 2009-04-09 Jakub Jelinek <jakub@redhat.com> |
| |
| * Makefile.in: Change copyright header to refer to version |
| 3 of the GNU General Public License and to point readers at the |
| COPYING3 file and the FSF's license web page. |
| * configure.ac: Likewise. |
| |
| 2009-04-06 Laurent GUERBY <laurent@guerby.net> |
| |
| * Makefile.in (ADA_RTS_DIR): Define. |
| * Makefile.in (gnatlib-*): Link adainclude and adalib to it. |
| |
| 2008-09-21 Laurent Guerby <laurent@guerby.net> |
| Paolo Bonzini <bonzini@gnu.org> |
| |
| PR ada/5911 |
| * Makefile.in (all, install, mostlyclean, clean, distclean): Add |
| multilib handling. |
| * configure.ac: Add multilib handling. |
| * configure: Regenerate. |
| |
| 2008-08-29 Laurent Guerby <laurent@guerby.net> |
| |
| * Makefile.in (FLAGS_TO_PASS): renamed to LIBADA_FLAGS_TO_PASS to |
| avoid conflicts. Factor more flags to pass. |
| (libsubdir): New variable. |
| (install-gnatlib): New target. |
| |
| 2008-08-28 Laurent Guerby <laurent@guerby.net> |
| |
| * configure: Regenerate. |
| |
| 2008-08-06 Thomas Quinot <quinot@adacore.com> |
| |
| * Makefile.in: generate s-oscons.ads again, previous change was |
| unneeded. |
| |
| 2008-08-06 Samuel Tardieu <sam@rfc1149.net> |
| |
| * Makefile.in: Pass FLAGS_TO_PASS to sub-make for target |
| oscons. |
| |
| 2008-08-06 Thomas Quinot <quinot@adacore.com> |
| |
| * Makefile.in: Now generate s-oscons-$(THREAD_KIND). |
| |
| 2008-08-05 Thomas Quinot <quinot@adacore.com> |
| |
| * Makefile.in (gnatlib*): Now depend on oscons target. |
| (oscons): New target. |
| |
| 2008-08-01 Paolo Bonzini <bonzini@gnu.org> |
| |
| * configure.ac (warn_cflags): Substitute. |
| * configure: Regenerate. |
| * Makefile.in (libdir, WARN_CFLAGS): Substitute. |
| (GCC_WARN_CFLAGS): Remove NOCOMMON_FLAG. |
| (ADA_CFLAGS, T_ADA_CFLAGS, X_ADA_CFLAGS, ALL_ADA_CFLAGS): Remove, |
| they were unused. |
| (libada-mk): Do not include. Include libgcc.mvars instead. |
| (tmake_file): Remove, do not include. |
| (FLAGS_TO_PASS): Pass dummy values for exeext and CC. |
| * configure: Regenerate. |
| |
| 2008-06-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * configure.ac: move sinclude of acx.m4 before AC_INIT, |
| also sinclude override.m4. |
| * Makefile.in ($(srcdir)/configure): Update dependencies. |
| * configure: Regenerate. |
| |
| 2007-03-01 Brooks Moses <brooks.moses@codesourcery.com> |
| |
| * Makefile.in: Add dummy install-pdf target. |
| |
| 2007-01-23 Richard Guenther <rguenther@suse.de> |
| |
| PR bootstrap/30541 |
| * Makefile.in (STAGE_PREFIX): Do not define. |
| (FLAGS_TO_PASS): Do not pass STAGE_PREFIX. |
| |
| 2006-11-16 Paolo Bonzini <bonzini@gnu.org> |
| |
| PR bootstrap/29802 |
| * configure.ac: Call GCC_TOPLEV_SUBDIRS. |
| * configure: Regenerate. |
| * Makefile.in: Replace host_subdir. |
| |
| 2006-10-16 Brooks Moses <bmoses@stanford.edu> |
| |
| * Makefile.in: Add dummy "pdf" target. |
| |
| 2006-05-23 Carlos O'Donell <carlos@codesourcery.com> |
| |
| * Makefile.in: Add install-html target. |
| |
| 2005-12-05 Paolo Bonzini <bonzini@gnu.org> |
| |
| * Makefile.in (FLAGS_TO_PASS): Add GCC_FOR_TARGET. |
| |
| 2005-04-27 James E Wilson <wilson@specifixinc.com> |
| |
| * Makefile.in (html): New. |
| |
| 2005-02-28 Paolo Bonzini <bonzini@gnu.org> |
| |
| PR bootstrap/17383 |
| * Makefile.in (GCC_DIR): Add $(HOST_SUBDIR) to the definition. |
| |
| 2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org> |
| |
| * Makefile.in: Add stamp file for building libada, to avoid |
| duplicate builds every time all-gnattools is called. |
| |
| 2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org> |
| |
| * Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure) |
| here. |
| |
| 2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org> |
| |
| * configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST, |
| _TARGET. |
| * configure: Regenerate. |
| |
| 2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org> |
| |
| * configure.ac, Makefile.in: Remove gnattools-specific code |
| (see gnattools directory). |
| * Makefile.in: Remove dead rts-* targets. |
| * configure: Regenerate. |
| |
| 2004-05-25 Daniel Jacobowitz <drow@false.org> |
| |
| * Makefile.in: Add .NOEXPORT. |
| |
| 2004-04-26 Arnaud Charlet <charlet@act-europe.fr> |
| |
| * Makefile.in: Put back merge of some targets to avoid code duplication. |
| Remove at the same obsolete variable GNATLIBLDFLAGS. |
| |
| 2004-04-19 Nathanael Nerode <neroden@gcc.gnu.org> |
| |
| * configure.ac: Fix stupid brain-fade; set default_gnattools_target |
| correctly. |
| * configure: Regenerate. |
| |
| 2004-04-19 Nathanael Nerode <neroden@gcc.gnu.org> |
| |
| * Makefile.in: Revert most of Arnaud's last change. Prefer anything |
| over error-prone Make abuse. Remove temporary debug code. |
| (gnatlib-zcx): New target. |
| (gnattools): Split into gnattools-native, gnattools-cross, to fix |
| previous bug; select which on the basis of default_gnattools_target. |
| (ada.all.cross): Merged with gnattools-cross target. |
| * configure.ac: Set default_gnattools_target. |
| * configure: Regenerate. |
| |
| 2004-04-19 Arnaud Charlet <charlet@act-europe.fr> |
| |
| * Makefile.in: Fix errors introduced in previous change (in particular, |
| errors when building gnattools were ignored). |
| Code clean up and simplification. |
| update comments. |
| Remove temporary debug code introduced by mistake in previous check in. |
| Prefer GNU Make syntax over complex and error-prone sh syntax. |
| (gnatlib-zcx): New target. |
| (ada.all.cross): Merged with gnattools-cross target. |
| |
| 2004-04-17 Nathanael Nerode <neroden@gcc.gnu.org> |
| |
| * configure.ac: It's gnatlib-plain in the Makefile, not |
| gnatlib-simple; make configure match. |
| * configure: Regenerate. |
| |
| 2004-04-14 Nathanael Nerode <neroden@gcc.gnu.org> |
| |
| * Makefile.in: Call gcc/ada/Makefile directly, not through the |
| intermediary of gcc/Makefile. Incorporate all necessary parts of |
| rules from gcc/ada/Make-lang.in, including extra gnatlib/gnattools |
| targets, rts-zfp, rts-ravenscar. Get needed bits of GCC |
| configuration from (new) gcc/libada-mk. Decide what gnatlib variant |
| to build in configure.ac, not here. |
| * configure.ac: Provide Makefile.in with the new information it needs, |
| such as GCC's tmake_file and xmake_file. |
| * configure: Regenerate. |
| |
| 2004-03-10 Kelley Cook <kcook@gcc.gnu.org> |
| |
| * configure.in: Rename file to ... |
| * configure.ac: .. to this. Bump AC_PREREQ to 2.59. |
| * configure: Regenerate. |
| |
| 2003-03-02 Arnaud Charlet <charlet@act-europe.fr> |
| |
| PR ada/14350 |
| * configure.in: Remove hardcoded gcc version. |
| |
| * configure: Regenerated. |
| |
| 2004-02-10 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * Makefile.in (gnattools): Depend on gnatlib. |
| |
| 2003-02-10 Arnaud Charlet <charlet@act-europe.fr> |
| |
| PR ada/6637, PR ada/5911 |
| * configure.in, Makefile.in, configure: Merge with libada-branch |
| |
| 2003-10-27 Arnaud Charlet <charlet@act-europe.fr> |
| |
| PR ada/6637, PR ada/5911 |
| * configure.in: Add support for --enable/disable-shared |
| * Makefile.in: Add initial, simple support for gnatlib/gnattools |
| for native and cross configurations. |
| * configure: Regenerate |
| |
| 2003-10-23 Nathanael Nerode <neroden@gcc.gnu.org> |
| |
| * configure.in: Make --enable-maintainer-mode work. |
| * configure: Regenerate. |
| |
| * Makefile.in, configure.in: New files. |
| * configure: Generate. |
| |
| * New directory, new ChangeLog. |
| |
| Copyright (C) 2003-2022 Free Software Foundation, Inc. |
| |
| This ChangeLog is free software; the Free Software Foundation gives |
| unlimited permission to copy, distribute, and modify it. |