| /* Gimple IR support functions. |
| |
| Copyright (C) 2007-2015 Free Software Foundation, Inc. |
| Contributed by Aldy Hernandez <aldyh@redhat.com> |
| |
| This file is part of GCC. |
| |
| GCC is free software; you can redistribute it and/or modify it under |
| the terms of the GNU General Public License as published by the Free |
| Software Foundation; either version 3, or (at your option) any later |
| version. |
| |
| GCC is distributed in the hope that it will be useful, but WITHOUT ANY |
| WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with GCC; see the file COPYING3. If not see |
| <http://www.gnu.org/licenses/>. */ |
| |
| #include "config.h" |
| #include "system.h" |
| #include "coretypes.h" |
| #include "tm.h" |
| #include "target.h" |
| #include "hash-set.h" |
| #include "machmode.h" |
| #include "vec.h" |
| #include "double-int.h" |
| #include "input.h" |
| #include "alias.h" |
| #include "symtab.h" |
| #include "wide-int.h" |
| #include "inchash.h" |
| #include "tree.h" |
| #include "fold-const.h" |
| #include "calls.h" |
| #include "stmt.h" |
| #include "stor-layout.h" |
| #include "hard-reg-set.h" |
| #include "predict.h" |
| #include "input.h" |
| #include "function.h" |
| #include "dominance.h" |
| #include "cfg.h" |
| #include "basic-block.h" |
| #include "tree-ssa-alias.h" |
| #include "internal-fn.h" |
| #include "tree-eh.h" |
| #include "gimple-expr.h" |
| #include "is-a.h" |
| #include "gimple.h" |
| #include "gimple-iterator.h" |
| #include "gimple-walk.h" |
| #include "gimple.h" |
| #include "gimplify.h" |
| #include "diagnostic.h" |
| #include "value-prof.h" |
| #include "flags.h" |
| #include "alias.h" |
| #include "demangle.h" |
| #include "langhooks.h" |
| #include "bitmap.h" |
| #include "stringpool.h" |
| #include "tree-ssanames.h" |
| #include "ipa-ref.h" |
| #include "lto-streamer.h" |
| #include "cgraph.h" |
| #include "gimple-ssa.h" |
| |
| |
| /* All the tuples have their operand vector (if present) at the very bottom |
| of the structure. Therefore, the offset required to find the |
| operands vector the size of the structure minus the size of the 1 |
| element tree array at the end (see gimple_ops). */ |
| #define DEFGSSTRUCT(SYM, STRUCT, HAS_TREE_OP) \ |
| (HAS_TREE_OP ? sizeof (struct STRUCT) - sizeof (tree) : 0), |
| EXPORTED_CONST size_t gimple_ops_offset_[] = { |
| #include "gsstruct.def" |
| }; |
| #undef DEFGSSTRUCT |
| |
| #define DEFGSSTRUCT(SYM, STRUCT, HAS_TREE_OP) sizeof (struct STRUCT), |
| static const size_t gsstruct_code_size[] = { |
| #include "gsstruct.def" |
| }; |
| #undef DEFGSSTRUCT |
| |
| #define DEFGSCODE(SYM, NAME, GSSCODE) NAME, |
| const char *const gimple_code_name[] = { |
| #include "gimple.def" |
| }; |
| #undef DEFGSCODE |
| |
| #define DEFGSCODE(SYM, NAME, GSSCODE) GSSCODE, |
| EXPORTED_CONST enum gimple_statement_structure_enum gss_for_code_[] = { |
| #include "gimple.def" |
| }; |
| #undef DEFGSCODE |
| |
| /* Gimple stats. */ |
| |
| int gimple_alloc_counts[(int) gimple_alloc_kind_all]; |
| int gimple_alloc_sizes[(int) gimple_alloc_kind_all]; |
| |
| /* Keep in sync with gimple.h:enum gimple_alloc_kind. */ |
| static const char * const gimple_alloc_kind_names[] = { |
| "assignments", |
| "phi nodes", |
| "conditionals", |
| "everything else" |
| }; |
| |
| /* Gimple tuple constructors. |
| Note: Any constructor taking a ``gimple_seq'' as a parameter, can |
| be passed a NULL to start with an empty sequence. */ |
| |
| /* Set the code for statement G to CODE. */ |
| |
| static inline void |
| gimple_set_code (gimple g, enum gimple_code code) |
| { |
| g->code = code; |
| } |
| |
| /* Return the number of bytes needed to hold a GIMPLE statement with |
| code CODE. */ |
| |
| static inline size_t |
| gimple_size (enum gimple_code code) |
| { |
| return gsstruct_code_size[gss_for_code (code)]; |
| } |
| |
| /* Allocate memory for a GIMPLE statement with code CODE and NUM_OPS |
| operands. */ |
| |
| gimple |
| gimple_alloc_stat (enum gimple_code code, unsigned num_ops MEM_STAT_DECL) |
| { |
| size_t size; |
| gimple stmt; |
| |
| size = gimple_size (code); |
| if (num_ops > 0) |
| size += sizeof (tree) * (num_ops - 1); |
| |
| if (GATHER_STATISTICS) |
| { |
| enum gimple_alloc_kind kind = gimple_alloc_kind (code); |
| gimple_alloc_counts[(int) kind]++; |
| gimple_alloc_sizes[(int) kind] += size; |
| } |
| |
| stmt = ggc_alloc_cleared_gimple_statement_stat (size PASS_MEM_STAT); |
| gimple_set_code (stmt, code); |
| gimple_set_num_ops (stmt, num_ops); |
| |
| /* Do not call gimple_set_modified here as it has other side |
| effects and this tuple is still not completely built. */ |
| stmt->modified = 1; |
| gimple_init_singleton (stmt); |
| |
| return stmt; |
| } |
| |
| /* Set SUBCODE to be the code of the expression computed by statement G. */ |
| |
| static inline void |
| gimple_set_subcode (gimple g, unsigned subcode) |
| { |
| /* We only have 16 bits for the RHS code. Assert that we are not |
| overflowing it. */ |
| gcc_assert (subcode < (1 << 16)); |
| g->subcode = subcode; |
| } |
| |
| |
| |
| /* Build a tuple with operands. CODE is the statement to build (which |
| must be one of the GIMPLE_WITH_OPS tuples). SUBCODE is the subcode |
| for the new tuple. NUM_OPS is the number of operands to allocate. */ |
| |
| #define gimple_build_with_ops(c, s, n) \ |
| gimple_build_with_ops_stat (c, s, n MEM_STAT_INFO) |
| |
| static gimple |
| gimple_build_with_ops_stat (enum gimple_code code, unsigned subcode, |
| unsigned num_ops MEM_STAT_DECL) |
| { |
| gimple s = gimple_alloc_stat (code, num_ops PASS_MEM_STAT); |
| gimple_set_subcode (s, subcode); |
| |
| return s; |
| } |
| |
| |
| /* Build a GIMPLE_RETURN statement returning RETVAL. */ |
| |
| greturn * |
| gimple_build_return (tree retval) |
| { |
| greturn *s |
| = as_a <greturn *> (gimple_build_with_ops (GIMPLE_RETURN, ERROR_MARK, |
| 2)); |
| if (retval) |
| gimple_return_set_retval (s, retval); |
| return s; |
| } |
| |
| /* Reset alias information on call S. */ |
| |
| void |
| gimple_call_reset_alias_info (gcall *s) |
| { |
| if (gimple_call_flags (s) & ECF_CONST) |
| memset (gimple_call_use_set (s), 0, sizeof (struct pt_solution)); |
| else |
| pt_solution_reset (gimple_call_use_set (s)); |
| if (gimple_call_flags (s) & (ECF_CONST|ECF_PURE|ECF_NOVOPS)) |
| memset (gimple_call_clobber_set (s), 0, sizeof (struct pt_solution)); |
| else |
| pt_solution_reset (gimple_call_clobber_set (s)); |
| } |
| |
| /* Helper for gimple_build_call, gimple_build_call_valist, |
| gimple_build_call_vec and gimple_build_call_from_tree. Build the basic |
| components of a GIMPLE_CALL statement to function FN with NARGS |
| arguments. */ |
| |
| static inline gcall * |
| gimple_build_call_1 (tree fn, unsigned nargs) |
| { |
| gcall *s |
| = as_a <gcall *> (gimple_build_with_ops (GIMPLE_CALL, ERROR_MARK, |
| nargs + 3)); |
| if (TREE_CODE (fn) == FUNCTION_DECL) |
| fn = build_fold_addr_expr (fn); |
| gimple_set_op (s, 1, fn); |
| gimple_call_set_fntype (s, TREE_TYPE (TREE_TYPE (fn))); |
| gimple_call_reset_alias_info (s); |
| return s; |
| } |
| |
| |
| /* Build a GIMPLE_CALL statement to function FN with the arguments |
| specified in vector ARGS. */ |
| |
| gcall * |
| gimple_build_call_vec (tree fn, vec<tree> args) |
| { |
| unsigned i; |
| unsigned nargs = args.length (); |
| gcall *call = gimple_build_call_1 (fn, nargs); |
| |
| for (i = 0; i < nargs; i++) |
| gimple_call_set_arg (call, i, args[i]); |
| |
| return call; |
| } |
| |
| |
| /* Build a GIMPLE_CALL statement to function FN. NARGS is the number of |
| arguments. The ... are the arguments. */ |
| |
| gcall * |
| gimple_build_call (tree fn, unsigned nargs, ...) |
| { |
| va_list ap; |
| gcall *call; |
| unsigned i; |
| |
| gcc_assert (TREE_CODE (fn) == FUNCTION_DECL || is_gimple_call_addr (fn)); |
| |
| call = gimple_build_call_1 (fn, nargs); |
| |
| va_start (ap, nargs); |
| for (i = 0; i < nargs; i++) |
| gimple_call_set_arg (call, i, va_arg (ap, tree)); |
| va_end (ap); |
| |
| return call; |
| } |
| |
| |
| /* Build a GIMPLE_CALL statement to function FN. NARGS is the number of |
| arguments. AP contains the arguments. */ |
| |
| gcall * |
| gimple_build_call_valist (tree fn, unsigned nargs, va_list ap) |
| { |
| gcall *call; |
| unsigned i; |
| |
| gcc_assert (TREE_CODE (fn) == FUNCTION_DECL || is_gimple_call_addr (fn)); |
| |
| call = gimple_build_call_1 (fn, nargs); |
| |
| for (i = 0; i < nargs; i++) |
| gimple_call_set_arg (call, i, va_arg (ap, tree)); |
| |
| return call; |
| } |
| |
| |
| /* Helper for gimple_build_call_internal and gimple_build_call_internal_vec. |
| Build the basic components of a GIMPLE_CALL statement to internal |
| function FN with NARGS arguments. */ |
| |
| static inline gcall * |
| gimple_build_call_internal_1 (enum internal_fn fn, unsigned nargs) |
| { |
| gcall *s |
| = as_a <gcall *> (gimple_build_with_ops (GIMPLE_CALL, ERROR_MARK, |
| nargs + 3)); |
| s->subcode |= GF_CALL_INTERNAL; |
| gimple_call_set_internal_fn (s, fn); |
| gimple_call_reset_alias_info (s); |
| return s; |
| } |
| |
| |
| /* Build a GIMPLE_CALL statement to internal function FN. NARGS is |
| the number of arguments. The ... are the arguments. */ |
| |
| gcall * |
| gimple_build_call_internal (enum internal_fn fn, unsigned nargs, ...) |
| { |
| va_list ap; |
| gcall *call; |
| unsigned i; |
| |
| call = gimple_build_call_internal_1 (fn, nargs); |
| va_start (ap, nargs); |
| for (i = 0; i < nargs; i++) |
| gimple_call_set_arg (call, i, va_arg (ap, tree)); |
| va_end (ap); |
| |
| return call; |
| } |
| |
| |
| /* Build a GIMPLE_CALL statement to internal function FN with the arguments |
| specified in vector ARGS. */ |
| |
| gcall * |
| gimple_build_call_internal_vec (enum internal_fn fn, vec<tree> args) |
| { |
| unsigned i, nargs; |
| gcall *call; |
| |
| nargs = args.length (); |
| call = gimple_build_call_internal_1 (fn, nargs); |
| for (i = 0; i < nargs; i++) |
| gimple_call_set_arg (call, i, args[i]); |
| |
| return call; |
| } |
| |
| |
| /* Build a GIMPLE_CALL statement from CALL_EXPR T. Note that T is |
| assumed to be in GIMPLE form already. Minimal checking is done of |
| this fact. */ |
| |
| gcall * |
| gimple_build_call_from_tree (tree t) |
| { |
| unsigned i, nargs; |
| gcall *call; |
| tree fndecl = get_callee_fndecl (t); |
| |
| gcc_assert (TREE_CODE (t) == CALL_EXPR); |
| |
| nargs = call_expr_nargs (t); |
| call = gimple_build_call_1 (fndecl ? fndecl : CALL_EXPR_FN (t), nargs); |
| |
| for (i = 0; i < nargs; i++) |
| gimple_call_set_arg (call, i, CALL_EXPR_ARG (t, i)); |
| |
| gimple_set_block (call, TREE_BLOCK (t)); |
| |
| /* Carry all the CALL_EXPR flags to the new GIMPLE_CALL. */ |
| gimple_call_set_chain (call, CALL_EXPR_STATIC_CHAIN (t)); |
| gimple_call_set_tail (call, CALL_EXPR_TAILCALL (t)); |
| gimple_call_set_return_slot_opt (call, CALL_EXPR_RETURN_SLOT_OPT (t)); |
| if (fndecl |
| && DECL_BUILT_IN_CLASS (fndecl) == BUILT_IN_NORMAL |
| && (DECL_FUNCTION_CODE (fndecl) == BUILT_IN_ALLOCA |
| || DECL_FUNCTION_CODE (fndecl) == BUILT_IN_ALLOCA_WITH_ALIGN)) |
| gimple_call_set_alloca_for_var (call, CALL_ALLOCA_FOR_VAR_P (t)); |
| else |
| gimple_call_set_from_thunk (call, CALL_FROM_THUNK_P (t)); |
| gimple_call_set_va_arg_pack (call, CALL_EXPR_VA_ARG_PACK (t)); |
| gimple_call_set_nothrow (call, TREE_NOTHROW (t)); |
| gimple_set_no_warning (call, TREE_NO_WARNING (t)); |
| gimple_call_set_with_bounds (call, CALL_WITH_BOUNDS_P (t)); |
| |
| return call; |
| } |
| |
| |
| /* Build a GIMPLE_ASSIGN statement. |
| |
| LHS of the assignment. |
| RHS of the assignment which can be unary or binary. */ |
| |
| gassign * |
| gimple_build_assign (tree lhs, tree rhs MEM_STAT_DECL) |
| { |
| enum tree_code subcode; |
| tree op1, op2, op3; |
| |
| extract_ops_from_tree (rhs, &subcode, &op1, &op2, &op3); |
| return gimple_build_assign (lhs, subcode, op1, op2, op3 PASS_MEM_STAT); |
| } |
| |
| |
| /* Build a GIMPLE_ASSIGN statement with subcode SUBCODE and operands |
| OP1, OP2 and OP3. */ |
| |
| static inline gassign * |
| gimple_build_assign_1 (tree lhs, enum tree_code subcode, tree op1, |
| tree op2, tree op3 MEM_STAT_DECL) |
| { |
| unsigned num_ops; |
| gassign *p; |
| |
| /* Need 1 operand for LHS and 1 or 2 for the RHS (depending on the |
| code). */ |
| num_ops = get_gimple_rhs_num_ops (subcode) + 1; |
| |
| p = as_a <gassign *> ( |
| gimple_build_with_ops_stat (GIMPLE_ASSIGN, (unsigned)subcode, num_ops |
| PASS_MEM_STAT)); |
| gimple_assign_set_lhs (p, lhs); |
| gimple_assign_set_rhs1 (p, op1); |
| if (op2) |
| { |
| gcc_assert (num_ops > 2); |
| gimple_assign_set_rhs2 (p, op2); |
| } |
| |
| if (op3) |
| { |
| gcc_assert (num_ops > 3); |
| gimple_assign_set_rhs3 (p, op3); |
| } |
| |
| return p; |
| } |
| |
| /* Build a GIMPLE_ASSIGN statement with subcode SUBCODE and operands |
| OP1, OP2 and OP3. */ |
| |
| gassign * |
| gimple_build_assign (tree lhs, enum tree_code subcode, tree op1, |
| tree op2, tree op3 MEM_STAT_DECL) |
| { |
| return gimple_build_assign_1 (lhs, subcode, op1, op2, op3 PASS_MEM_STAT); |
| } |
| |
| /* Build a GIMPLE_ASSIGN statement with subcode SUBCODE and operands |
| OP1 and OP2. */ |
| |
| gassign * |
| gimple_build_assign (tree lhs, enum tree_code subcode, tree op1, |
| tree op2 MEM_STAT_DECL) |
| { |
| return gimple_build_assign_1 (lhs, subcode, op1, op2, NULL_TREE |
| PASS_MEM_STAT); |
| } |
| |
| /* Build a GIMPLE_ASSIGN statement with subcode SUBCODE and operand OP1. */ |
| |
| gassign * |
| gimple_build_assign (tree lhs, enum tree_code subcode, tree op1 MEM_STAT_DECL) |
| { |
| return gimple_build_assign_1 (lhs, subcode, op1, NULL_TREE, NULL_TREE |
| PASS_MEM_STAT); |
| } |
| |
| |
| /* Build a GIMPLE_COND statement. |
| |
| PRED is the condition used to compare LHS and the RHS. |
| T_LABEL is the label to jump to if the condition is true. |
| F_LABEL is the label to jump to otherwise. */ |
| |
| gcond * |
| gimple_build_cond (enum tree_code pred_code, tree lhs, tree rhs, |
| tree t_label, tree f_label) |
| { |
| gcond *p; |
| |
| gcc_assert (TREE_CODE_CLASS (pred_code) == tcc_comparison); |
| p = as_a <gcond *> (gimple_build_with_ops (GIMPLE_COND, pred_code, 4)); |
| gimple_cond_set_lhs (p, lhs); |
| gimple_cond_set_rhs (p, rhs); |
| gimple_cond_set_true_label (p, t_label); |
| gimple_cond_set_false_label (p, f_label); |
| return p; |
| } |
| |
| /* Build a GIMPLE_COND statement from the conditional expression tree |
| COND. T_LABEL and F_LABEL are as in gimple_build_cond. */ |
| |
| gcond * |
| gimple_build_cond_from_tree (tree cond, tree t_label, tree f_label) |
| { |
| enum tree_code code; |
| tree lhs, rhs; |
| |
| gimple_cond_get_ops_from_tree (cond, &code, &lhs, &rhs); |
| return gimple_build_cond (code, lhs, rhs, t_label, f_label); |
| } |
| |
| /* Set code, lhs, and rhs of a GIMPLE_COND from a suitable |
| boolean expression tree COND. */ |
| |
| void |
| gimple_cond_set_condition_from_tree (gcond *stmt, tree cond) |
| { |
| enum tree_code code; |
| tree lhs, rhs; |
| |
| gimple_cond_get_ops_from_tree (cond, &code, &lhs, &rhs); |
| gimple_cond_set_condition (stmt, code, lhs, rhs); |
| } |
| |
| /* Build a GIMPLE_LABEL statement for LABEL. */ |
| |
| glabel * |
| gimple_build_label (tree label) |
| { |
| glabel *p |
| = as_a <glabel *> (gimple_build_with_ops (GIMPLE_LABEL, ERROR_MARK, 1)); |
| gimple_label_set_label (p, label); |
| return p; |
| } |
| |
| /* Build a GIMPLE_GOTO statement to label DEST. */ |
| |
| ggoto * |
| gimple_build_goto (tree dest) |
| { |
| ggoto *p |
| = as_a <ggoto *> (gimple_build_with_ops (GIMPLE_GOTO, ERROR_MARK, 1)); |
| gimple_goto_set_dest (p, dest); |
| return p; |
| } |
| |
| |
| /* Build a GIMPLE_NOP statement. */ |
| |
| gimple |
| gimple_build_nop (void) |
| { |
| return gimple_alloc (GIMPLE_NOP, 0); |
| } |
| |
| |
| /* Build a GIMPLE_BIND statement. |
| VARS are the variables in BODY. |
| BLOCK is the containing block. */ |
| |
| gbind * |
| gimple_build_bind (tree vars, gimple_seq body, tree block) |
| { |
| gbind *p = as_a <gbind *> (gimple_alloc (GIMPLE_BIND, 0)); |
| gimple_bind_set_vars (p, vars); |
| if (body) |
| gimple_bind_set_body (p, body); |
| if (block) |
| gimple_bind_set_block (p, block); |
| return p; |
| } |
| |
| /* Helper function to set the simple fields of a asm stmt. |
| |
| STRING is a pointer to a string that is the asm blocks assembly code. |
| NINPUT is the number of register inputs. |
| NOUTPUT is the number of register outputs. |
| NCLOBBERS is the number of clobbered registers. |
| */ |
| |
| static inline gasm * |
| gimple_build_asm_1 (const char *string, unsigned ninputs, unsigned noutputs, |
| unsigned nclobbers, unsigned nlabels) |
| { |
| gasm *p; |
| int size = strlen (string); |
| |
| /* ASMs with labels cannot have outputs. This should have been |
| enforced by the front end. */ |
| gcc_assert (nlabels == 0 || noutputs == 0); |
| |
| p = as_a <gasm *> ( |
| gimple_build_with_ops (GIMPLE_ASM, ERROR_MARK, |
| ninputs + noutputs + nclobbers + nlabels)); |
| |
| p->ni = ninputs; |
| p->no = noutputs; |
| p->nc = nclobbers; |
| p->nl = nlabels; |
| p->string = ggc_alloc_string (string, size); |
| |
| if (GATHER_STATISTICS) |
| gimple_alloc_sizes[(int) gimple_alloc_kind (GIMPLE_ASM)] += size; |
| |
| return p; |
| } |
| |
| /* Build a GIMPLE_ASM statement. |
| |
| STRING is the assembly code. |
| NINPUT is the number of register inputs. |
| NOUTPUT is the number of register outputs. |
| NCLOBBERS is the number of clobbered registers. |
| INPUTS is a vector of the input register parameters. |
| OUTPUTS is a vector of the output register parameters. |
| CLOBBERS is a vector of the clobbered register parameters. |
| LABELS is a vector of destination labels. */ |
| |
| gasm * |
| gimple_build_asm_vec (const char *string, vec<tree, va_gc> *inputs, |
| vec<tree, va_gc> *outputs, vec<tree, va_gc> *clobbers, |
| vec<tree, va_gc> *labels) |
| { |
| gasm *p; |
| unsigned i; |
| |
| p = gimple_build_asm_1 (string, |
| vec_safe_length (inputs), |
| vec_safe_length (outputs), |
| vec_safe_length (clobbers), |
| vec_safe_length (labels)); |
| |
| for (i = 0; i < vec_safe_length (inputs); i++) |
| gimple_asm_set_input_op (p, i, (*inputs)[i]); |
| |
| for (i = 0; i < vec_safe_length (outputs); i++) |
| gimple_asm_set_output_op (p, i, (*outputs)[i]); |
| |
| for (i = 0; i < vec_safe_length (clobbers); i++) |
| gimple_asm_set_clobber_op (p, i, (*clobbers)[i]); |
| |
| for (i = 0; i < vec_safe_length (labels); i++) |
| gimple_asm_set_label_op (p, i, (*labels)[i]); |
| |
| return p; |
| } |
| |
| /* Build a GIMPLE_CATCH statement. |
| |
| TYPES are the catch types. |
| HANDLER is the exception handler. */ |
| |
| gcatch * |
| gimple_build_catch (tree types, gimple_seq handler) |
| { |
| gcatch *p = as_a <gcatch *> (gimple_alloc (GIMPLE_CATCH, 0)); |
| gimple_catch_set_types (p, types); |
| if (handler) |
| gimple_catch_set_handler (p, handler); |
| |
| return p; |
| } |
| |
| /* Build a GIMPLE_EH_FILTER statement. |
| |
| TYPES are the filter's types. |
| FAILURE is the filter's failure action. */ |
| |
| geh_filter * |
| gimple_build_eh_filter (tree types, gimple_seq failure) |
| { |
| geh_filter *p = as_a <geh_filter *> (gimple_alloc (GIMPLE_EH_FILTER, 0)); |
| gimple_eh_filter_set_types (p, types); |
| if (failure) |
| gimple_eh_filter_set_failure (p, failure); |
| |
| return p; |
| } |
| |
| /* Build a GIMPLE_EH_MUST_NOT_THROW statement. */ |
| |
| geh_mnt * |
| gimple_build_eh_must_not_throw (tree decl) |
| { |
| geh_mnt *p = as_a <geh_mnt *> (gimple_alloc (GIMPLE_EH_MUST_NOT_THROW, 0)); |
| |
| gcc_assert (TREE_CODE (decl) == FUNCTION_DECL); |
| gcc_assert (flags_from_decl_or_type (decl) & ECF_NORETURN); |
| gimple_eh_must_not_throw_set_fndecl (p, decl); |
| |
| return p; |
| } |
| |
| /* Build a GIMPLE_EH_ELSE statement. */ |
| |
| geh_else * |
| gimple_build_eh_else (gimple_seq n_body, gimple_seq e_body) |
| { |
| geh_else *p = as_a <geh_else *> (gimple_alloc (GIMPLE_EH_ELSE, 0)); |
| gimple_eh_else_set_n_body (p, n_body); |
| gimple_eh_else_set_e_body (p, e_body); |
| return p; |
| } |
| |
| /* Build a GIMPLE_TRY statement. |
| |
| EVAL is the expression to evaluate. |
| CLEANUP is the cleanup expression. |
| KIND is either GIMPLE_TRY_CATCH or GIMPLE_TRY_FINALLY depending on |
| whether this is a try/catch or a try/finally respectively. */ |
| |
| gtry * |
| gimple_build_try (gimple_seq eval, gimple_seq cleanup, |
| enum gimple_try_flags kind) |
| { |
| gtry *p; |
| |
| gcc_assert (kind == GIMPLE_TRY_CATCH || kind == GIMPLE_TRY_FINALLY); |
| p = as_a <gtry *> (gimple_alloc (GIMPLE_TRY, 0)); |
| gimple_set_subcode (p, kind); |
| if (eval) |
| gimple_try_set_eval (p, eval); |
| if (cleanup) |
| gimple_try_set_cleanup (p, cleanup); |
| |
| return p; |
| } |
| |
| /* Construct a GIMPLE_WITH_CLEANUP_EXPR statement. |
| |
| CLEANUP is the cleanup expression. */ |
| |
| gimple |
| gimple_build_wce (gimple_seq cleanup) |
| { |
| gimple p = gimple_alloc (GIMPLE_WITH_CLEANUP_EXPR, 0); |
| if (cleanup) |
| gimple_wce_set_cleanup (p, cleanup); |
| |
| return p; |
| } |
| |
| |
| /* Build a GIMPLE_RESX statement. */ |
| |
| gresx * |
| gimple_build_resx (int region) |
| { |
| gresx *p |
| = as_a <gresx *> (gimple_build_with_ops (GIMPLE_RESX, ERROR_MARK, 0)); |
| p->region = region; |
| return p; |
| } |
| |
| |
| /* The helper for constructing a gimple switch statement. |
| INDEX is the switch's index. |
| NLABELS is the number of labels in the switch excluding the default. |
| DEFAULT_LABEL is the default label for the switch statement. */ |
| |
| gswitch * |
| gimple_build_switch_nlabels (unsigned nlabels, tree index, tree default_label) |
| { |
| /* nlabels + 1 default label + 1 index. */ |
| gcc_checking_assert (default_label); |
| gswitch *p = as_a <gswitch *> (gimple_build_with_ops (GIMPLE_SWITCH, |
| ERROR_MARK, |
| 1 + 1 + nlabels)); |
| gimple_switch_set_index (p, index); |
| gimple_switch_set_default_label (p, default_label); |
| return p; |
| } |
| |
| /* Build a GIMPLE_SWITCH statement. |
| |
| INDEX is the switch's index. |
| DEFAULT_LABEL is the default label |
| ARGS is a vector of labels excluding the default. */ |
| |
| gswitch * |
| gimple_build_switch (tree index, tree default_label, vec<tree> args) |
| { |
| unsigned i, nlabels = args.length (); |
| |
| gswitch *p = gimple_build_switch_nlabels (nlabels, index, default_label); |
| |
| /* Copy the labels from the vector to the switch statement. */ |
| for (i = 0; i < nlabels; i++) |
| gimple_switch_set_label (p, i + 1, args[i]); |
| |
| return p; |
| } |
| |
| /* Build a GIMPLE_EH_DISPATCH statement. */ |
| |
| geh_dispatch * |
| gimple_build_eh_dispatch (int region) |
| { |
| geh_dispatch *p |
| = as_a <geh_dispatch *> ( |
| gimple_build_with_ops (GIMPLE_EH_DISPATCH, ERROR_MARK, 0)); |
| p->region = region; |
| return p; |
| } |
| |
| /* Build a new GIMPLE_DEBUG_BIND statement. |
| |
| VAR is bound to VALUE; block and location are taken from STMT. */ |
| |
| gdebug * |
| gimple_build_debug_bind_stat (tree var, tree value, gimple stmt MEM_STAT_DECL) |
| { |
| gdebug *p |
| = as_a <gdebug *> (gimple_build_with_ops_stat (GIMPLE_DEBUG, |
| (unsigned)GIMPLE_DEBUG_BIND, 2 |
| PASS_MEM_STAT)); |
| gimple_debug_bind_set_var (p, var); |
| gimple_debug_bind_set_value (p, value); |
| if (stmt) |
| gimple_set_location (p, gimple_location (stmt)); |
| |
| return p; |
| } |
| |
| |
| /* Build a new GIMPLE_DEBUG_SOURCE_BIND statement. |
| |
| VAR is bound to VALUE; block and location are taken from STMT. */ |
| |
| gdebug * |
| gimple_build_debug_source_bind_stat (tree var, tree value, |
| gimple stmt MEM_STAT_DECL) |
| { |
| gdebug *p |
| = as_a <gdebug *> ( |
| gimple_build_with_ops_stat (GIMPLE_DEBUG, |
| (unsigned)GIMPLE_DEBUG_SOURCE_BIND, 2 |
| PASS_MEM_STAT)); |
| |
| gimple_debug_source_bind_set_var (p, var); |
| gimple_debug_source_bind_set_value (p, value); |
| if (stmt) |
| gimple_set_location (p, gimple_location (stmt)); |
| |
| return p; |
| } |
| |
| |
| /* Build a GIMPLE_OMP_CRITICAL statement. |
| |
| BODY is the sequence of statements for which only one thread can execute. |
| NAME is optional identifier for this critical block. */ |
| |
| gomp_critical * |
| gimple_build_omp_critical (gimple_seq body, tree name) |
| { |
| gomp_critical *p |
| = as_a <gomp_critical *> (gimple_alloc (GIMPLE_OMP_CRITICAL, 0)); |
| gimple_omp_critical_set_name (p, name); |
| if (body) |
| gimple_omp_set_body (p, body); |
| |
| return p; |
| } |
| |
| /* Build a GIMPLE_OMP_FOR statement. |
| |
| BODY is sequence of statements inside the for loop. |
| KIND is the `for' variant. |
| CLAUSES, are any of the construct's clauses. |
| COLLAPSE is the collapse count. |
| PRE_BODY is the sequence of statements that are loop invariant. */ |
| |
| gomp_for * |
| gimple_build_omp_for (gimple_seq body, int kind, tree clauses, size_t collapse, |
| gimple_seq pre_body) |
| { |
| gomp_for *p = as_a <gomp_for *> (gimple_alloc (GIMPLE_OMP_FOR, 0)); |
| if (body) |
| gimple_omp_set_body (p, body); |
| gimple_omp_for_set_clauses (p, clauses); |
| gimple_omp_for_set_kind (p, kind); |
| p->collapse = collapse; |
| p->iter = ggc_cleared_vec_alloc<gimple_omp_for_iter> (collapse); |
| |
| if (pre_body) |
| gimple_omp_for_set_pre_body (p, pre_body); |
| |
| return p; |
| } |
| |
| |
| /* Build a GIMPLE_OMP_PARALLEL statement. |
| |
| BODY is sequence of statements which are executed in parallel. |
| CLAUSES, are the OMP parallel construct's clauses. |
| CHILD_FN is the function created for the parallel threads to execute. |
| DATA_ARG are the shared data argument(s). */ |
| |
| gomp_parallel * |
| gimple_build_omp_parallel (gimple_seq body, tree clauses, tree child_fn, |
| tree data_arg) |
| { |
| gomp_parallel *p |
| = as_a <gomp_parallel *> (gimple_alloc (GIMPLE_OMP_PARALLEL, 0)); |
| if (body) |
| gimple_omp_set_body (p, body); |
| gimple_omp_parallel_set_clauses (p, clauses); |
| gimple_omp_parallel_set_child_fn (p, child_fn); |
| gimple_omp_parallel_set_data_arg (p, data_arg); |
| |
| return p; |
| } |
| |
| |
| /* Build a GIMPLE_OMP_TASK statement. |
| |
| BODY is sequence of statements which are executed by the explicit task. |
| CLAUSES, are the OMP parallel construct's clauses. |
| CHILD_FN is the function created for the parallel threads to execute. |
| DATA_ARG are the shared data argument(s). |
| COPY_FN is the optional function for firstprivate initialization. |
| ARG_SIZE and ARG_ALIGN are size and alignment of the data block. */ |
| |
| gomp_task * |
| gimple_build_omp_task (gimple_seq body, tree clauses, tree child_fn, |
| tree data_arg, tree copy_fn, tree arg_size, |
| tree arg_align) |
| { |
| gomp_task *p = as_a <gomp_task *> (gimple_alloc (GIMPLE_OMP_TASK, 0)); |
| if (body) |
| gimple_omp_set_body (p, body); |
| gimple_omp_task_set_clauses (p, clauses); |
| gimple_omp_task_set_child_fn (p, child_fn); |
| gimple_omp_task_set_data_arg (p, data_arg); |
| gimple_omp_task_set_copy_fn (p, copy_fn); |
| gimple_omp_task_set_arg_size (p, arg_size); |
| gimple_omp_task_set_arg_align (p, arg_align); |
| |
| return p; |
| } |
| |
| |
| /* Build a GIMPLE_OMP_SECTION statement for a sections statement. |
| |
| BODY is the sequence of statements in the section. */ |
| |
| gimple |
| gimple_build_omp_section (gimple_seq body) |
| { |
| gimple p = gimple_alloc (GIMPLE_OMP_SECTION, 0); |
| if (body) |
| gimple_omp_set_body (p, body); |
| |
| return p; |
| } |
| |
| |
| /* Build a GIMPLE_OMP_MASTER statement. |
| |
| BODY is the sequence of statements to be executed by just the master. */ |
| |
| gimple |
| gimple_build_omp_master (gimple_seq body) |
| { |
| gimple p = gimple_alloc (GIMPLE_OMP_MASTER, 0); |
| if (body) |
| gimple_omp_set_body (p, body); |
| |
| return p; |
| } |
| |
| |
| /* Build a GIMPLE_OMP_TASKGROUP statement. |
| |
| BODY is the sequence of statements to be executed by the taskgroup |
| construct. */ |
| |
| gimple |
| gimple_build_omp_taskgroup (gimple_seq body) |
| { |
| gimple p = gimple_alloc (GIMPLE_OMP_TASKGROUP, 0); |
| if (body) |
| gimple_omp_set_body (p, body); |
| |
| return p; |
| } |
| |
| |
| /* Build a GIMPLE_OMP_CONTINUE statement. |
| |
| CONTROL_DEF is the definition of the control variable. |
| CONTROL_USE is the use of the control variable. */ |
| |
| gomp_continue * |
| gimple_build_omp_continue (tree control_def, tree control_use) |
| { |
| gomp_continue *p |
| = as_a <gomp_continue *> (gimple_alloc (GIMPLE_OMP_CONTINUE, 0)); |
| gimple_omp_continue_set_control_def (p, control_def); |
| gimple_omp_continue_set_control_use (p, control_use); |
| return p; |
| } |
| |
| /* Build a GIMPLE_OMP_ORDERED statement. |
| |
| BODY is the sequence of statements inside a loop that will executed in |
| sequence. */ |
| |
| gimple |
| gimple_build_omp_ordered (gimple_seq body) |
| { |
| gimple p = gimple_alloc (GIMPLE_OMP_ORDERED, 0); |
| if (body) |
| gimple_omp_set_body (p, body); |
| |
| return p; |
| } |
| |
| |
| /* Build a GIMPLE_OMP_RETURN statement. |
| WAIT_P is true if this is a non-waiting return. */ |
| |
| gimple |
| gimple_build_omp_return (bool wait_p) |
| { |
| gimple p = gimple_alloc (GIMPLE_OMP_RETURN, 0); |
| if (wait_p) |
| gimple_omp_return_set_nowait (p); |
| |
| return p; |
| } |
| |
| |
| /* Build a GIMPLE_OMP_SECTIONS statement. |
| |
| BODY is a sequence of section statements. |
| CLAUSES are any of the OMP sections contsruct's clauses: private, |
| firstprivate, lastprivate, reduction, and nowait. */ |
| |
| gomp_sections * |
| gimple_build_omp_sections (gimple_seq body, tree clauses) |
| { |
| gomp_sections *p |
| = as_a <gomp_sections *> (gimple_alloc (GIMPLE_OMP_SECTIONS, 0)); |
| if (body) |
| gimple_omp_set_body (p, body); |
| gimple_omp_sections_set_clauses (p, clauses); |
| |
| return p; |
| } |
| |
| |
| /* Build a GIMPLE_OMP_SECTIONS_SWITCH. */ |
| |
| gimple |
| gimple_build_omp_sections_switch (void) |
| { |
| return gimple_alloc (GIMPLE_OMP_SECTIONS_SWITCH, 0); |
| } |
| |
| |
| /* Build a GIMPLE_OMP_SINGLE statement. |
| |
| BODY is the sequence of statements that will be executed once. |
| CLAUSES are any of the OMP single construct's clauses: private, firstprivate, |
| copyprivate, nowait. */ |
| |
| gomp_single * |
| gimple_build_omp_single (gimple_seq body, tree clauses) |
| { |
| gomp_single *p |
| = as_a <gomp_single *> (gimple_alloc (GIMPLE_OMP_SINGLE, 0)); |
| if (body) |
| gimple_omp_set_body (p, body); |
| gimple_omp_single_set_clauses (p, clauses); |
| |
| return p; |
| } |
| |
| |
| /* Build a GIMPLE_OMP_TARGET statement. |
| |
| BODY is the sequence of statements that will be executed. |
| KIND is the kind of the region. |
| CLAUSES are any of the construct's clauses. */ |
| |
| gomp_target * |
| gimple_build_omp_target (gimple_seq body, int kind, tree clauses) |
| { |
| gomp_target *p |
| = as_a <gomp_target *> (gimple_alloc (GIMPLE_OMP_TARGET, 0)); |
| if (body) |
| gimple_omp_set_body (p, body); |
| gimple_omp_target_set_clauses (p, clauses); |
| gimple_omp_target_set_kind (p, kind); |
| |
| return p; |
| } |
| |
| |
| /* Build a GIMPLE_OMP_TEAMS statement. |
| |
| BODY is the sequence of statements that will be executed. |
| CLAUSES are any of the OMP teams construct's clauses. */ |
| |
| gomp_teams * |
| gimple_build_omp_teams (gimple_seq body, tree clauses) |
| { |
| gomp_teams *p = as_a <gomp_teams *> (gimple_alloc (GIMPLE_OMP_TEAMS, 0)); |
| if (body) |
| gimple_omp_set_body (p, body); |
| gimple_omp_teams_set_clauses (p, clauses); |
| |
| return p; |
| } |
| |
| |
| /* Build a GIMPLE_OMP_ATOMIC_LOAD statement. */ |
| |
| gomp_atomic_load * |
| gimple_build_omp_atomic_load (tree lhs, tree rhs) |
| { |
| gomp_atomic_load *p |
| = as_a <gomp_atomic_load *> (gimple_alloc (GIMPLE_OMP_ATOMIC_LOAD, 0)); |
| gimple_omp_atomic_load_set_lhs (p, lhs); |
| gimple_omp_atomic_load_set_rhs (p, rhs); |
| return p; |
| } |
| |
| /* Build a GIMPLE_OMP_ATOMIC_STORE statement. |
| |
| VAL is the value we are storing. */ |
| |
| gomp_atomic_store * |
| gimple_build_omp_atomic_store (tree val) |
| { |
| gomp_atomic_store *p |
| = as_a <gomp_atomic_store *> (gimple_alloc (GIMPLE_OMP_ATOMIC_STORE, 0)); |
| gimple_omp_atomic_store_set_val (p, val); |
| return p; |
| } |
| |
| /* Build a GIMPLE_TRANSACTION statement. */ |
| |
| gtransaction * |
| gimple_build_transaction (gimple_seq body, tree label) |
| { |
| gtransaction *p |
| = as_a <gtransaction *> (gimple_alloc (GIMPLE_TRANSACTION, 0)); |
| gimple_transaction_set_body (p, body); |
| gimple_transaction_set_label (p, label); |
| return p; |
| } |
| |
| /* Build a GIMPLE_PREDICT statement. PREDICT is one of the predictors from |
| predict.def, OUTCOME is NOT_TAKEN or TAKEN. */ |
| |
| gimple |
| gimple_build_predict (enum br_predictor predictor, enum prediction outcome) |
| { |
| gimple p = gimple_alloc (GIMPLE_PREDICT, 0); |
| /* Ensure all the predictors fit into the lower bits of the subcode. */ |
| gcc_assert ((int) END_PREDICTORS <= GF_PREDICT_TAKEN); |
| gimple_predict_set_predictor (p, predictor); |
| gimple_predict_set_outcome (p, outcome); |
| return p; |
| } |
| |
| #if defined ENABLE_GIMPLE_CHECKING |
| /* Complain of a gimple type mismatch and die. */ |
| |
| void |
| gimple_check_failed (const_gimple gs, const char *file, int line, |
| const char *function, enum gimple_code code, |
| enum tree_code subcode) |
| { |
| internal_error ("gimple check: expected %s(%s), have %s(%s) in %s, at %s:%d", |
| gimple_code_name[code], |
| get_tree_code_name (subcode), |
| gimple_code_name[gimple_code (gs)], |
| gs->subcode > 0 |
| ? get_tree_code_name ((enum tree_code) gs->subcode) |
| : "", |
| function, trim_filename (file), line); |
| } |
| #endif /* ENABLE_GIMPLE_CHECKING */ |
| |
| |
| /* Link gimple statement GS to the end of the sequence *SEQ_P. If |
| *SEQ_P is NULL, a new sequence is allocated. */ |
| |
| void |
| gimple_seq_add_stmt (gimple_seq *seq_p, gimple gs) |
| { |
| gimple_stmt_iterator si; |
| if (gs == NULL) |
| return; |
| |
| si = gsi_last (*seq_p); |
| gsi_insert_after (&si, gs, GSI_NEW_STMT); |
| } |
| |
| /* Link gimple statement GS to the end of the sequence *SEQ_P. If |
| *SEQ_P is NULL, a new sequence is allocated. This function is |
| similar to gimple_seq_add_stmt, but does not scan the operands. |
| During gimplification, we need to manipulate statement sequences |
| before the def/use vectors have been constructed. */ |
| |
| void |
| gimple_seq_add_stmt_without_update (gimple_seq *seq_p, gimple gs) |
| { |
| gimple_stmt_iterator si; |
| |
| if (gs == NULL) |
| return; |
| |
| si = gsi_last (*seq_p); |
| gsi_insert_after_without_update (&si, gs, GSI_NEW_STMT); |
| } |
| |
| /* Append sequence SRC to the end of sequence *DST_P. If *DST_P is |
| NULL, a new sequence is allocated. */ |
| |
| void |
| gimple_seq_add_seq (gimple_seq *dst_p, gimple_seq src) |
| { |
| gimple_stmt_iterator si; |
| if (src == NULL) |
| return; |
| |
| si = gsi_last (*dst_p); |
| gsi_insert_seq_after (&si, src, GSI_NEW_STMT); |
| } |
| |
| /* Append sequence SRC to the end of sequence *DST_P. If *DST_P is |
| NULL, a new sequence is allocated. This function is |
| similar to gimple_seq_add_seq, but does not scan the operands. */ |
| |
| void |
| gimple_seq_add_seq_without_update (gimple_seq *dst_p, gimple_seq src) |
| { |
| gimple_stmt_iterator si; |
| if (src == NULL) |
| return; |
| |
| si = gsi_last (*dst_p); |
| gsi_insert_seq_after_without_update (&si, src, GSI_NEW_STMT); |
| } |
| |
| /* Determine whether to assign a location to the statement GS. */ |
| |
| static bool |
| should_carry_location_p (gimple gs) |
| { |
| /* Don't emit a line note for a label. We particularly don't want to |
| emit one for the break label, since it doesn't actually correspond |
| to the beginning of the loop/switch. */ |
| if (gimple_code (gs) == GIMPLE_LABEL) |
| return false; |
| |
| return true; |
| } |
| |
| /* Set the location for gimple statement GS to LOCATION. */ |
| |
| static void |
| annotate_one_with_location (gimple gs, location_t location) |
| { |
| if (!gimple_has_location (gs) |
| && !gimple_do_not_emit_location_p (gs) |
| && should_carry_location_p (gs)) |
| gimple_set_location (gs, location); |
| } |
| |
| /* Set LOCATION for all the statements after iterator GSI in sequence |
| SEQ. If GSI is pointing to the end of the sequence, start with the |
| first statement in SEQ. */ |
| |
| void |
| annotate_all_with_location_after (gimple_seq seq, gimple_stmt_iterator gsi, |
| location_t location) |
| { |
| if (gsi_end_p (gsi)) |
| gsi = gsi_start (seq); |
| else |
| gsi_next (&gsi); |
| |
| for (; !gsi_end_p (gsi); gsi_next (&gsi)) |
| annotate_one_with_location (gsi_stmt (gsi), location); |
| } |
| |
| /* Set the location for all the statements in a sequence STMT_P to LOCATION. */ |
| |
| void |
| annotate_all_with_location (gimple_seq stmt_p, location_t location) |
| { |
| gimple_stmt_iterator i; |
| |
| if (gimple_seq_empty_p (stmt_p)) |
| return; |
| |
| for (i = gsi_start (stmt_p); !gsi_end_p (i); gsi_next (&i)) |
| { |
| gimple gs = gsi_stmt (i); |
| annotate_one_with_location (gs, location); |
| } |
| } |
| |
| /* Helper function of empty_body_p. Return true if STMT is an empty |
| statement. */ |
| |
| static bool |
| empty_stmt_p (gimple stmt) |
| { |
| if (gimple_code (stmt) == GIMPLE_NOP) |
| return true; |
| if (gbind *bind_stmt = dyn_cast <gbind *> (stmt)) |
| return empty_body_p (gimple_bind_body (bind_stmt)); |
| return false; |
| } |
| |
| |
| /* Return true if BODY contains nothing but empty statements. */ |
| |
| bool |
| empty_body_p (gimple_seq body) |
| { |
| gimple_stmt_iterator i; |
| |
| if (gimple_seq_empty_p (body)) |
| return true; |
| for (i = gsi_start (body); !gsi_end_p (i); gsi_next (&i)) |
| if (!empty_stmt_p (gsi_stmt (i)) |
| && !is_gimple_debug (gsi_stmt (i))) |
| return false; |
| |
| return true; |
| } |
| |
| |
| /* Perform a deep copy of sequence SRC and return the result. */ |
| |
| gimple_seq |
| gimple_seq_copy (gimple_seq src) |
| { |
| gimple_stmt_iterator gsi; |
| gimple_seq new_seq = NULL; |
| gimple stmt; |
| |
| for (gsi = gsi_start (src); !gsi_end_p (gsi); gsi_next (&gsi)) |
| { |
| stmt = gimple_copy (gsi_stmt (gsi)); |
| gimple_seq_add_stmt (&new_seq, stmt); |
| } |
| |
| return new_seq; |
| } |
| |
| |
| |
| /* Return true if calls C1 and C2 are known to go to the same function. */ |
| |
| bool |
| gimple_call_same_target_p (const_gimple c1, const_gimple c2) |
| { |
| if (gimple_call_internal_p (c1)) |
| return (gimple_call_internal_p (c2) |
| && gimple_call_internal_fn (c1) == gimple_call_internal_fn (c2)); |
| else |
| return (gimple_call_fn (c1) == gimple_call_fn (c2) |
| || (gimple_call_fndecl (c1) |
| && gimple_call_fndecl (c1) == gimple_call_fndecl (c2))); |
| } |
| |
| /* Detect flags from a GIMPLE_CALL. This is just like |
| call_expr_flags, but for gimple tuples. */ |
| |
| int |
| gimple_call_flags (const_gimple stmt) |
| { |
| int flags; |
| tree decl = gimple_call_fndecl (stmt); |
| |
| if (decl) |
| flags = flags_from_decl_or_type (decl); |
| else if (gimple_call_internal_p (stmt)) |
| flags = internal_fn_flags (gimple_call_internal_fn (stmt)); |
| else |
| flags = flags_from_decl_or_type (gimple_call_fntype (stmt)); |
| |
| if (stmt->subcode & GF_CALL_NOTHROW) |
| flags |= ECF_NOTHROW; |
| |
| return flags; |
| } |
| |
| /* Return the "fn spec" string for call STMT. */ |
| |
| static const_tree |
| gimple_call_fnspec (const gcall *stmt) |
| { |
| tree type, attr; |
| |
| if (gimple_call_internal_p (stmt)) |
| return internal_fn_fnspec (gimple_call_internal_fn (stmt)); |
| |
| type = gimple_call_fntype (stmt); |
| if (!type) |
| return NULL_TREE; |
| |
| attr = lookup_attribute ("fn spec", TYPE_ATTRIBUTES (type)); |
| if (!attr) |
| return NULL_TREE; |
| |
| return TREE_VALUE (TREE_VALUE (attr)); |
| } |
| |
| /* Detects argument flags for argument number ARG on call STMT. */ |
| |
| int |
| gimple_call_arg_flags (const gcall *stmt, unsigned arg) |
| { |
| const_tree attr = gimple_call_fnspec (stmt); |
| |
| if (!attr || 1 + arg >= (unsigned) TREE_STRING_LENGTH (attr)) |
| return 0; |
| |
| switch (TREE_STRING_POINTER (attr)[1 + arg]) |
| { |
| case 'x': |
| case 'X': |
| return EAF_UNUSED; |
| |
| case 'R': |
| return EAF_DIRECT | EAF_NOCLOBBER | EAF_NOESCAPE; |
| |
| case 'r': |
| return EAF_NOCLOBBER | EAF_NOESCAPE; |
| |
| case 'W': |
| return EAF_DIRECT | EAF_NOESCAPE; |
| |
| case 'w': |
| return EAF_NOESCAPE; |
| |
| case '.': |
| default: |
| return 0; |
| } |
| } |
| |
| /* Detects return flags for the call STMT. */ |
| |
| int |
| gimple_call_return_flags (const gcall *stmt) |
| { |
| const_tree attr; |
| |
| if (gimple_call_flags (stmt) & ECF_MALLOC) |
| return ERF_NOALIAS; |
| |
| attr = gimple_call_fnspec (stmt); |
| if (!attr || TREE_STRING_LENGTH (attr) < 1) |
| return 0; |
| |
| switch (TREE_STRING_POINTER (attr)[0]) |
| { |
| case '1': |
| case '2': |
| case '3': |
| case '4': |
| return ERF_RETURNS_ARG | (TREE_STRING_POINTER (attr)[0] - '1'); |
| |
| case 'm': |
| return ERF_NOALIAS; |
| |
| case '.': |
| default: |
| return 0; |
| } |
| } |
| |
| |
| /* Return true if GS is a copy assignment. */ |
| |
| bool |
| gimple_assign_copy_p (gimple gs) |
| { |
| return (gimple_assign_single_p (gs) |
| && is_gimple_val (gimple_op (gs, 1))); |
| } |
| |
| |
| /* Return true if GS is a SSA_NAME copy assignment. */ |
| |
| bool |
| gimple_assign_ssa_name_copy_p (gimple gs) |
| { |
| return (gimple_assign_single_p (gs) |
| && TREE_CODE (gimple_assign_lhs (gs)) == SSA_NAME |
| && TREE_CODE (gimple_assign_rhs1 (gs)) == SSA_NAME); |
| } |
| |
| |
| /* Return true if GS is an assignment with a unary RHS, but the |
| operator has no effect on the assigned value. The logic is adapted |
| from STRIP_NOPS. This predicate is intended to be used in tuplifying |
| instances in which STRIP_NOPS was previously applied to the RHS of |
| an assignment. |
| |
| NOTE: In the use cases that led to the creation of this function |
| and of gimple_assign_single_p, it is typical to test for either |
| condition and to proceed in the same manner. In each case, the |
| assigned value is represented by the single RHS operand of the |
| assignment. I suspect there may be cases where gimple_assign_copy_p, |
| gimple_assign_single_p, or equivalent logic is used where a similar |
| treatment of unary NOPs is appropriate. */ |
| |
| bool |
| gimple_assign_unary_nop_p (gimple gs) |
| { |
| return (is_gimple_assign (gs) |
| && (CONVERT_EXPR_CODE_P (gimple_assign_rhs_code (gs)) |
| || gimple_assign_rhs_code (gs) == NON_LVALUE_EXPR) |
| && gimple_assign_rhs1 (gs) != error_mark_node |
| && (TYPE_MODE (TREE_TYPE (gimple_assign_lhs (gs))) |
| == TYPE_MODE (TREE_TYPE (gimple_assign_rhs1 (gs))))); |
| } |
| |
| /* Set BB to be the basic block holding G. */ |
| |
| void |
| gimple_set_bb (gimple stmt, basic_block bb) |
| { |
| stmt->bb = bb; |
| |
| if (gimple_code (stmt) != GIMPLE_LABEL) |
| return; |
| |
| /* If the statement is a label, add the label to block-to-labels map |
| so that we can speed up edge creation for GIMPLE_GOTOs. */ |
| if (cfun->cfg) |
| { |
| tree t; |
| int uid; |
| |
| t = gimple_label_label (as_a <glabel *> (stmt)); |
| uid = LABEL_DECL_UID (t); |
| if (uid == -1) |
| { |
| unsigned old_len = |
| vec_safe_length (label_to_block_map_for_fn (cfun)); |
| LABEL_DECL_UID (t) = uid = cfun->cfg->last_label_uid++; |
| if (old_len <= (unsigned) uid) |
| { |
| unsigned new_len = 3 * uid / 2 + 1; |
| |
| vec_safe_grow_cleared (label_to_block_map_for_fn (cfun), |
| new_len); |
| } |
| } |
| |
| (*label_to_block_map_for_fn (cfun))[uid] = bb; |
| } |
| } |
| |
| |
| /* Modify the RHS of the assignment pointed-to by GSI using the |
| operands in the expression tree EXPR. |
| |
| NOTE: The statement pointed-to by GSI may be reallocated if it |
| did not have enough operand slots. |
| |
| This function is useful to convert an existing tree expression into |
| the flat representation used for the RHS of a GIMPLE assignment. |
| It will reallocate memory as needed to expand or shrink the number |
| of operand slots needed to represent EXPR. |
| |
| NOTE: If you find yourself building a tree and then calling this |
| function, you are most certainly doing it the slow way. It is much |
| better to build a new assignment or to use the function |
| gimple_assign_set_rhs_with_ops, which does not require an |
| expression tree to be built. */ |
| |
| void |
| gimple_assign_set_rhs_from_tree (gimple_stmt_iterator *gsi, tree expr) |
| { |
| enum tree_code subcode; |
| tree op1, op2, op3; |
| |
| extract_ops_from_tree (expr, &subcode, &op1, &op2, &op3); |
| gimple_assign_set_rhs_with_ops (gsi, subcode, op1, op2, op3); |
| } |
| |
| |
| /* Set the RHS of assignment statement pointed-to by GSI to CODE with |
| operands OP1, OP2 and OP3. |
| |
| NOTE: The statement pointed-to by GSI may be reallocated if it |
| did not have enough operand slots. */ |
| |
| void |
| gimple_assign_set_rhs_with_ops (gimple_stmt_iterator *gsi, enum tree_code code, |
| tree op1, tree op2, tree op3) |
| { |
| unsigned new_rhs_ops = get_gimple_rhs_num_ops (code); |
| gimple stmt = gsi_stmt (*gsi); |
| |
| /* If the new CODE needs more operands, allocate a new statement. */ |
| if (gimple_num_ops (stmt) < new_rhs_ops + 1) |
| { |
| tree lhs = gimple_assign_lhs (stmt); |
| gimple new_stmt = gimple_alloc (gimple_code (stmt), new_rhs_ops + 1); |
| memcpy (new_stmt, stmt, gimple_size (gimple_code (stmt))); |
| gimple_init_singleton (new_stmt); |
| gsi_replace (gsi, new_stmt, true); |
| stmt = new_stmt; |
| |
| /* The LHS needs to be reset as this also changes the SSA name |
| on the LHS. */ |
| gimple_assign_set_lhs (stmt, lhs); |
| } |
| |
| gimple_set_num_ops (stmt, new_rhs_ops + 1); |
| gimple_set_subcode (stmt, code); |
| gimple_assign_set_rhs1 (stmt, op1); |
| if (new_rhs_ops > 1) |
| gimple_assign_set_rhs2 (stmt, op2); |
| if (new_rhs_ops > 2) |
| gimple_assign_set_rhs3 (stmt, op3); |
| } |
| |
| |
| /* Return the LHS of a statement that performs an assignment, |
| either a GIMPLE_ASSIGN or a GIMPLE_CALL. Returns NULL_TREE |
| for a call to a function that returns no value, or for a |
| statement other than an assignment or a call. */ |
| |
| tree |
| gimple_get_lhs (const_gimple stmt) |
| { |
| enum gimple_code code = gimple_code (stmt); |
| |
| if (code == GIMPLE_ASSIGN) |
| return gimple_assign_lhs (stmt); |
| else if (code == GIMPLE_CALL) |
| return gimple_call_lhs (stmt); |
| else |
| return NULL_TREE; |
| } |
| |
| |
| /* Set the LHS of a statement that performs an assignment, |
| either a GIMPLE_ASSIGN or a GIMPLE_CALL. */ |
| |
| void |
| gimple_set_lhs (gimple stmt, tree lhs) |
| { |
| enum gimple_code code = gimple_code (stmt); |
| |
| if (code == GIMPLE_ASSIGN) |
| gimple_assign_set_lhs (stmt, lhs); |
| else if (code == GIMPLE_CALL) |
| gimple_call_set_lhs (stmt, lhs); |
| else |
| gcc_unreachable (); |
| } |
| |
| |
| /* Return a deep copy of statement STMT. All the operands from STMT |
| are reallocated and copied using unshare_expr. The DEF, USE, VDEF |
| and VUSE operand arrays are set to empty in the new copy. The new |
| copy isn't part of any sequence. */ |
| |
| gimple |
| gimple_copy (gimple stmt) |
| { |
| enum gimple_code code = gimple_code (stmt); |
| unsigned num_ops = gimple_num_ops (stmt); |
| gimple copy = gimple_alloc (code, num_ops); |
| unsigned i; |
| |
| /* Shallow copy all the fields from STMT. */ |
| memcpy (copy, stmt, gimple_size (code)); |
| gimple_init_singleton (copy); |
| |
| /* If STMT has sub-statements, deep-copy them as well. */ |
| if (gimple_has_substatements (stmt)) |
| { |
| gimple_seq new_seq; |
| tree t; |
| |
| switch (gimple_code (stmt)) |
| { |
| case GIMPLE_BIND: |
| { |
| gbind *bind_stmt = as_a <gbind *> (stmt); |
| gbind *bind_copy = as_a <gbind *> (copy); |
| new_seq = gimple_seq_copy (gimple_bind_body (bind_stmt)); |
| gimple_bind_set_body (bind_copy, new_seq); |
| gimple_bind_set_vars (bind_copy, |
| unshare_expr (gimple_bind_vars (bind_stmt))); |
| gimple_bind_set_block (bind_copy, gimple_bind_block (bind_stmt)); |
| } |
| break; |
| |
| case GIMPLE_CATCH: |
| { |
| gcatch *catch_stmt = as_a <gcatch *> (stmt); |
| gcatch *catch_copy = as_a <gcatch *> (copy); |
| new_seq = gimple_seq_copy (gimple_catch_handler (catch_stmt)); |
| gimple_catch_set_handler (catch_copy, new_seq); |
| t = unshare_expr (gimple_catch_types (catch_stmt)); |
| gimple_catch_set_types (catch_copy, t); |
| } |
| break; |
| |
| case GIMPLE_EH_FILTER: |
| { |
| geh_filter *eh_filter_stmt = as_a <geh_filter *> (stmt); |
| geh_filter *eh_filter_copy = as_a <geh_filter *> (copy); |
| new_seq |
| = gimple_seq_copy (gimple_eh_filter_failure (eh_filter_stmt)); |
| gimple_eh_filter_set_failure (eh_filter_copy, new_seq); |
| t = unshare_expr (gimple_eh_filter_types (eh_filter_stmt)); |
| gimple_eh_filter_set_types (eh_filter_copy, t); |
| } |
| break; |
| |
| case GIMPLE_EH_ELSE: |
| { |
| geh_else *eh_else_stmt = as_a <geh_else *> (stmt); |
| geh_else *eh_else_copy = as_a <geh_else *> (copy); |
| new_seq = gimple_seq_copy (gimple_eh_else_n_body (eh_else_stmt)); |
| gimple_eh_else_set_n_body (eh_else_copy, new_seq); |
| new_seq = gimple_seq_copy (gimple_eh_else_e_body (eh_else_stmt)); |
| gimple_eh_else_set_e_body (eh_else_copy, new_seq); |
| } |
| break; |
| |
| case GIMPLE_TRY: |
| { |
| gtry *try_stmt = as_a <gtry *> (stmt); |
| gtry *try_copy = as_a <gtry *> (copy); |
| new_seq = gimple_seq_copy (gimple_try_eval (try_stmt)); |
| gimple_try_set_eval (try_copy, new_seq); |
| new_seq = gimple_seq_copy (gimple_try_cleanup (try_stmt)); |
| gimple_try_set_cleanup (try_copy, new_seq); |
| } |
| break; |
| |
| case GIMPLE_OMP_FOR: |
| new_seq = gimple_seq_copy (gimple_omp_for_pre_body (stmt)); |
| gimple_omp_for_set_pre_body (copy, new_seq); |
| t = unshare_expr (gimple_omp_for_clauses (stmt)); |
| gimple_omp_for_set_clauses (copy, t); |
| { |
| gomp_for *omp_for_copy = as_a <gomp_for *> (copy); |
| omp_for_copy->iter = ggc_vec_alloc<gimple_omp_for_iter> |
| ( gimple_omp_for_collapse (stmt)); |
| } |
| for (i = 0; i < gimple_omp_for_collapse (stmt); i++) |
| { |
| gimple_omp_for_set_cond (copy, i, |
| gimple_omp_for_cond (stmt, i)); |
| gimple_omp_for_set_index (copy, i, |
| gimple_omp_for_index (stmt, i)); |
| t = unshare_expr (gimple_omp_for_initial (stmt, i)); |
| gimple_omp_for_set_initial (copy, i, t); |
| t = unshare_expr (gimple_omp_for_final (stmt, i)); |
| gimple_omp_for_set_final (copy, i, t); |
| t = unshare_expr (gimple_omp_for_incr (stmt, i)); |
| gimple_omp_for_set_incr (copy, i, t); |
| } |
| goto copy_omp_body; |
| |
| case GIMPLE_OMP_PARALLEL: |
| { |
| gomp_parallel *omp_par_stmt = as_a <gomp_parallel *> (stmt); |
| gomp_parallel *omp_par_copy = as_a <gomp_parallel *> (copy); |
| t = unshare_expr (gimple_omp_parallel_clauses (omp_par_stmt)); |
| gimple_omp_parallel_set_clauses (omp_par_copy, t); |
| t = unshare_expr (gimple_omp_parallel_child_fn (omp_par_stmt)); |
| gimple_omp_parallel_set_child_fn (omp_par_copy, t); |
| t = unshare_expr (gimple_omp_parallel_data_arg (omp_par_stmt)); |
| gimple_omp_parallel_set_data_arg (omp_par_copy, t); |
| } |
| goto copy_omp_body; |
| |
| case GIMPLE_OMP_TASK: |
| t = unshare_expr (gimple_omp_task_clauses (stmt)); |
| gimple_omp_task_set_clauses (copy, t); |
| t = unshare_expr (gimple_omp_task_child_fn (stmt)); |
| gimple_omp_task_set_child_fn (copy, t); |
| t = unshare_expr (gimple_omp_task_data_arg (stmt)); |
| gimple_omp_task_set_data_arg (copy, t); |
| t = unshare_expr (gimple_omp_task_copy_fn (stmt)); |
| gimple_omp_task_set_copy_fn (copy, t); |
| t = unshare_expr (gimple_omp_task_arg_size (stmt)); |
| gimple_omp_task_set_arg_size (copy, t); |
| t = unshare_expr (gimple_omp_task_arg_align (stmt)); |
| gimple_omp_task_set_arg_align (copy, t); |
| goto copy_omp_body; |
| |
| case GIMPLE_OMP_CRITICAL: |
| t = unshare_expr (gimple_omp_critical_name ( |
| as_a <gomp_critical *> (stmt))); |
| gimple_omp_critical_set_name (as_a <gomp_critical *> (copy), t); |
| goto copy_omp_body; |
| |
| case GIMPLE_OMP_SECTIONS: |
| t = unshare_expr (gimple_omp_sections_clauses (stmt)); |
| gimple_omp_sections_set_clauses (copy, t); |
| t = unshare_expr (gimple_omp_sections_control (stmt)); |
| gimple_omp_sections_set_control (copy, t); |
| /* FALLTHRU */ |
| |
| case GIMPLE_OMP_SINGLE: |
| case GIMPLE_OMP_TARGET: |
| case GIMPLE_OMP_TEAMS: |
| case GIMPLE_OMP_SECTION: |
| case GIMPLE_OMP_MASTER: |
| case GIMPLE_OMP_TASKGROUP: |
| case GIMPLE_OMP_ORDERED: |
| copy_omp_body: |
| new_seq = gimple_seq_copy (gimple_omp_body (stmt)); |
| gimple_omp_set_body (copy, new_seq); |
| break; |
| |
| case GIMPLE_TRANSACTION: |
| new_seq = gimple_seq_copy (gimple_transaction_body ( |
| as_a <gtransaction *> (stmt))); |
| gimple_transaction_set_body (as_a <gtransaction *> (copy), |
| new_seq); |
| break; |
| |
| case GIMPLE_WITH_CLEANUP_EXPR: |
| new_seq = gimple_seq_copy (gimple_wce_cleanup (stmt)); |
| gimple_wce_set_cleanup (copy, new_seq); |
| break; |
| |
| default: |
| gcc_unreachable (); |
| } |
| } |
| |
| /* Make copy of operands. */ |
| for (i = 0; i < num_ops; i++) |
| gimple_set_op (copy, i, unshare_expr (gimple_op (stmt, i))); |
| |
| if (gimple_has_mem_ops (stmt)) |
| { |
| gimple_set_vdef (copy, gimple_vdef (stmt)); |
| gimple_set_vuse (copy, gimple_vuse (stmt)); |
| } |
| |
| /* Clear out SSA operand vectors on COPY. */ |
| if (gimple_has_ops (stmt)) |
| { |
| gimple_set_use_ops (copy, NULL); |
| |
| /* SSA operands need to be updated. */ |
| gimple_set_modified (copy, true); |
| } |
| |
| return copy; |
| } |
| |
| |
| /* Return true if statement S has side-effects. We consider a |
| statement to have side effects if: |
| |
| - It is a GIMPLE_CALL not marked with ECF_PURE or ECF_CONST. |
| - Any of its operands are marked TREE_THIS_VOLATILE or TREE_SIDE_EFFECTS. */ |
| |
| bool |
| gimple_has_side_effects (const_gimple s) |
| { |
| if (is_gimple_debug (s)) |
| return false; |
| |
| /* We don't have to scan the arguments to check for |
| volatile arguments, though, at present, we still |
| do a scan to check for TREE_SIDE_EFFECTS. */ |
| if (gimple_has_volatile_ops (s)) |
| return true; |
| |
| if (gimple_code (s) == GIMPLE_ASM |
| && gimple_asm_volatile_p (as_a <const gasm *> (s))) |
| return true; |
| |
| if (is_gimple_call (s)) |
| { |
| int flags = gimple_call_flags (s); |
| |
| /* An infinite loop is considered a side effect. */ |
| if (!(flags & (ECF_CONST | ECF_PURE)) |
| || (flags & ECF_LOOPING_CONST_OR_PURE)) |
| return true; |
| |
| return false; |
| } |
| |
| return false; |
| } |
| |
| /* Helper for gimple_could_trap_p and gimple_assign_rhs_could_trap_p. |
| Return true if S can trap. When INCLUDE_MEM is true, check whether |
| the memory operations could trap. When INCLUDE_STORES is true and |
| S is a GIMPLE_ASSIGN, the LHS of the assignment is also checked. */ |
| |
| bool |
| gimple_could_trap_p_1 (gimple s, bool include_mem, bool include_stores) |
| { |
| tree t, div = NULL_TREE; |
| enum tree_code op; |
| |
| if (include_mem) |
| { |
| unsigned i, start = (is_gimple_assign (s) && !include_stores) ? 1 : 0; |
| |
| for (i = start; i < gimple_num_ops (s); i++) |
| if (tree_could_trap_p (gimple_op (s, i))) |
| return true; |
| } |
| |
| switch (gimple_code (s)) |
| { |
| case GIMPLE_ASM: |
| return gimple_asm_volatile_p (as_a <gasm *> (s)); |
| |
| case GIMPLE_CALL: |
| t = gimple_call_fndecl (s); |
| /* Assume that calls to weak functions may trap. */ |
| if (!t || !DECL_P (t) || DECL_WEAK (t)) |
| return true; |
| return false; |
| |
| case GIMPLE_ASSIGN: |
| t = gimple_expr_type (s); |
| op = gimple_assign_rhs_code (s); |
| if (get_gimple_rhs_class (op) == GIMPLE_BINARY_RHS) |
| div = gimple_assign_rhs2 (s); |
| return (operation_could_trap_p (op, FLOAT_TYPE_P (t), |
| (INTEGRAL_TYPE_P (t) |
| && TYPE_OVERFLOW_TRAPS (t)), |
| div)); |
| |
| case GIMPLE_COND: |
| t = TREE_TYPE (gimple_cond_lhs (s)); |
| return operation_could_trap_p (gimple_cond_code (s), |
| FLOAT_TYPE_P (t), false, NULL_TREE); |
| |
| default: |
| break; |
| } |
| |
| return false; |
| } |
| |
| /* Return true if statement S can trap. */ |
| |
| bool |
| gimple_could_trap_p (gimple s) |
| { |
| return gimple_could_trap_p_1 (s, true, true); |
| } |
| |
| /* Return true if RHS of a GIMPLE_ASSIGN S can trap. */ |
| |
| bool |
| gimple_assign_rhs_could_trap_p (gimple s) |
| { |
| gcc_assert (is_gimple_assign (s)); |
| return gimple_could_trap_p_1 (s, true, false); |
| } |
| |
| |
| /* Print debugging information for gimple stmts generated. */ |
| |
| void |
| dump_gimple_statistics (void) |
| { |
| int i, total_tuples = 0, total_bytes = 0; |
| |
| if (! GATHER_STATISTICS) |
| { |
| fprintf (stderr, "No gimple statistics\n"); |
| return; |
| } |
| |
| fprintf (stderr, "\nGIMPLE statements\n"); |
| fprintf (stderr, "Kind Stmts Bytes\n"); |
| fprintf (stderr, "---------------------------------------\n"); |
| for (i = 0; i < (int) gimple_alloc_kind_all; ++i) |
| { |
| fprintf (stderr, "%-20s %7d %10d\n", gimple_alloc_kind_names[i], |
| gimple_alloc_counts[i], gimple_alloc_sizes[i]); |
| total_tuples += gimple_alloc_counts[i]; |
| total_bytes += gimple_alloc_sizes[i]; |
| } |
| fprintf (stderr, "---------------------------------------\n"); |
| fprintf (stderr, "%-20s %7d %10d\n", "Total", total_tuples, total_bytes); |
| fprintf (stderr, "---------------------------------------\n"); |
| } |
| |
| |
| /* Return the number of operands needed on the RHS of a GIMPLE |
| assignment for an expression with tree code CODE. */ |
| |
| unsigned |
| get_gimple_rhs_num_ops (enum tree_code code) |
| { |
| enum gimple_rhs_class rhs_class = get_gimple_rhs_class (code); |
| |
| if (rhs_class == GIMPLE_UNARY_RHS || rhs_class == GIMPLE_SINGLE_RHS) |
| return 1; |
| else if (rhs_class == GIMPLE_BINARY_RHS) |
| return 2; |
| else if (rhs_class == GIMPLE_TERNARY_RHS) |
| return 3; |
| else |
| gcc_unreachable (); |
| } |
| |
| #define DEFTREECODE(SYM, STRING, TYPE, NARGS) \ |
| (unsigned char) \ |
| ((TYPE) == tcc_unary ? GIMPLE_UNARY_RHS \ |
| : ((TYPE) == tcc_binary \ |
| || (TYPE) == tcc_comparison) ? GIMPLE_BINARY_RHS \ |
| : ((TYPE) == tcc_constant \ |
| || (TYPE) == tcc_declaration \ |
| || (TYPE) == tcc_reference) ? GIMPLE_SINGLE_RHS \ |
| : ((SYM) == TRUTH_AND_EXPR \ |
| || (SYM) == TRUTH_OR_EXPR \ |
| || (SYM) == TRUTH_XOR_EXPR) ? GIMPLE_BINARY_RHS \ |
| : (SYM) == TRUTH_NOT_EXPR ? GIMPLE_UNARY_RHS \ |
| : ((SYM) == COND_EXPR \ |
| || (SYM) == WIDEN_MULT_PLUS_EXPR \ |
| || (SYM) == WIDEN_MULT_MINUS_EXPR \ |
| || (SYM) == DOT_PROD_EXPR \ |
| || (SYM) == SAD_EXPR \ |
| || (SYM) == REALIGN_LOAD_EXPR \ |
| || (SYM) == VEC_COND_EXPR \ |
| || (SYM) == VEC_PERM_EXPR \ |
| || (SYM) == FMA_EXPR) ? GIMPLE_TERNARY_RHS \ |
| : ((SYM) == CONSTRUCTOR \ |
| || (SYM) == OBJ_TYPE_REF \ |
| || (SYM) == ASSERT_EXPR \ |
| || (SYM) == ADDR_EXPR \ |
| || (SYM) == WITH_SIZE_EXPR \ |
| || (SYM) == SSA_NAME) ? GIMPLE_SINGLE_RHS \ |
| : GIMPLE_INVALID_RHS), |
| #define END_OF_BASE_TREE_CODES (unsigned char) GIMPLE_INVALID_RHS, |
| |
| const unsigned char gimple_rhs_class_table[] = { |
| #include "all-tree.def" |
| }; |
| |
| #undef DEFTREECODE |
| #undef END_OF_BASE_TREE_CODES |
| |
| /* Canonicalize a tree T for use in a COND_EXPR as conditional. Returns |
| a canonicalized tree that is valid for a COND_EXPR or NULL_TREE, if |
| we failed to create one. */ |
| |
| tree |
| canonicalize_cond_expr_cond (tree t) |
| { |
| /* Strip conversions around boolean operations. */ |
| if (CONVERT_EXPR_P (t) |
| && (truth_value_p (TREE_CODE (TREE_OPERAND (t, 0))) |
| || TREE_CODE (TREE_TYPE (TREE_OPERAND (t, 0))) |
| == BOOLEAN_TYPE)) |
| t = TREE_OPERAND (t, 0); |
| |
| /* For !x use x == 0. */ |
| if (TREE_CODE (t) == TRUTH_NOT_EXPR) |
| { |
| tree top0 = TREE_OPERAND (t, 0); |
| t = build2 (EQ_EXPR, TREE_TYPE (t), |
| top0, build_int_cst (TREE_TYPE (top0), 0)); |
| } |
| /* For cmp ? 1 : 0 use cmp. */ |
| else if (TREE_CODE (t) == COND_EXPR |
| && COMPARISON_CLASS_P (TREE_OPERAND (t, 0)) |
| && integer_onep (TREE_OPERAND (t, 1)) |
| && integer_zerop (TREE_OPERAND (t, 2))) |
| { |
| tree top0 = TREE_OPERAND (t, 0); |
| t = build2 (TREE_CODE (top0), TREE_TYPE (t), |
| TREE_OPERAND (top0, 0), TREE_OPERAND (top0, 1)); |
| } |
| /* For x ^ y use x != y. */ |
| else if (TREE_CODE (t) == BIT_XOR_EXPR) |
| t = build2 (NE_EXPR, TREE_TYPE (t), |
| TREE_OPERAND (t, 0), TREE_OPERAND (t, 1)); |
| |
| if (is_gimple_condexpr (t)) |
| return t; |
| |
| return NULL_TREE; |
| } |
| |
| /* Build a GIMPLE_CALL identical to STMT but skipping the arguments in |
| the positions marked by the set ARGS_TO_SKIP. */ |
| |
| gcall * |
| gimple_call_copy_skip_args (gcall *stmt, bitmap args_to_skip) |
| { |
| int i; |
| int nargs = gimple_call_num_args (stmt); |
| auto_vec<tree> vargs (nargs); |
| gcall *new_stmt; |
| |
| for (i = 0; i < nargs; i++) |
| if (!bitmap_bit_p (args_to_skip, i)) |
| vargs.quick_push (gimple_call_arg (stmt, i)); |
| |
| if (gimple_call_internal_p (stmt)) |
| new_stmt = gimple_build_call_internal_vec (gimple_call_internal_fn (stmt), |
| vargs); |
| else |
| new_stmt = gimple_build_call_vec (gimple_call_fn (stmt), vargs); |
| |
| if (gimple_call_lhs (stmt)) |
| gimple_call_set_lhs (new_stmt, gimple_call_lhs (stmt)); |
| |
| gimple_set_vuse (new_stmt, gimple_vuse (stmt)); |
| gimple_set_vdef (new_stmt, gimple_vdef (stmt)); |
| |
| if (gimple_has_location (stmt)) |
| gimple_set_location (new_stmt, gimple_location (stmt)); |
| gimple_call_copy_flags (new_stmt, stmt); |
| gimple_call_set_chain (new_stmt, gimple_call_chain (stmt)); |
| |
| gimple_set_modified (new_stmt, true); |
| |
| return new_stmt; |
| } |
| |
| |
| |
| /* Return true if the field decls F1 and F2 are at the same offset. |
| |
| This is intended to be used on GIMPLE types only. */ |
| |
| bool |
| gimple_compare_field_offset (tree f1, tree f2) |
| { |
| if (DECL_OFFSET_ALIGN (f1) == DECL_OFFSET_ALIGN (f2)) |
| { |
| tree offset1 = DECL_FIELD_OFFSET (f1); |
| tree offset2 = DECL_FIELD_OFFSET (f2); |
| return ((offset1 == offset2 |
| /* Once gimplification is done, self-referential offsets are |
| instantiated as operand #2 of the COMPONENT_REF built for |
| each access and reset. Therefore, they are not relevant |
| anymore and fields are interchangeable provided that they |
| represent the same access. */ |
| || (TREE_CODE (offset1) == PLACEHOLDER_EXPR |
| && TREE_CODE (offset2) == PLACEHOLDER_EXPR |
| && (DECL_SIZE (f1) == DECL_SIZE (f2) |
| || (TREE_CODE (DECL_SIZE (f1)) == PLACEHOLDER_EXPR |
| && TREE_CODE (DECL_SIZE (f2)) == PLACEHOLDER_EXPR) |
| || operand_equal_p (DECL_SIZE (f1), DECL_SIZE (f2), 0)) |
| && DECL_ALIGN (f1) == DECL_ALIGN (f2)) |
| || operand_equal_p (offset1, offset2, 0)) |
| && tree_int_cst_equal (DECL_FIELD_BIT_OFFSET (f1), |
| DECL_FIELD_BIT_OFFSET (f2))); |
| } |
| |
| /* Fortran and C do not always agree on what DECL_OFFSET_ALIGN |
| should be, so handle differing ones specially by decomposing |
| the offset into a byte and bit offset manually. */ |
| if (tree_fits_shwi_p (DECL_FIELD_OFFSET (f1)) |
| && tree_fits_shwi_p (DECL_FIELD_OFFSET (f2))) |
| { |
| unsigned HOST_WIDE_INT byte_offset1, byte_offset2; |
| unsigned HOST_WIDE_INT bit_offset1, bit_offset2; |
| bit_offset1 = TREE_INT_CST_LOW (DECL_FIELD_BIT_OFFSET (f1)); |
| byte_offset1 = (TREE_INT_CST_LOW (DECL_FIELD_OFFSET (f1)) |
| + bit_offset1 / BITS_PER_UNIT); |
| bit_offset2 = TREE_INT_CST_LOW (DECL_FIELD_BIT_OFFSET (f2)); |
| byte_offset2 = (TREE_INT_CST_LOW (DECL_FIELD_OFFSET (f2)) |
| + bit_offset2 / BITS_PER_UNIT); |
| if (byte_offset1 != byte_offset2) |
| return false; |
| return bit_offset1 % BITS_PER_UNIT == bit_offset2 % BITS_PER_UNIT; |
| } |
| |
| return false; |
| } |
| |
| |
| /* Return a type the same as TYPE except unsigned or |
| signed according to UNSIGNEDP. */ |
| |
| static tree |
| gimple_signed_or_unsigned_type (bool unsignedp, tree type) |
| { |
| tree type1; |
| int i; |
| |
| type1 = TYPE_MAIN_VARIANT (type); |
| if (type1 == signed_char_type_node |
| || type1 == char_type_node |
| || type1 == unsigned_char_type_node) |
| return unsignedp ? unsigned_char_type_node : signed_char_type_node; |
| if (type1 == integer_type_node || type1 == unsigned_type_node) |
| return unsignedp ? unsigned_type_node : integer_type_node; |
| if (type1 == short_integer_type_node || type1 == short_unsigned_type_node) |
| return unsignedp ? short_unsigned_type_node : short_integer_type_node; |
| if (type1 == long_integer_type_node || type1 == long_unsigned_type_node) |
| return unsignedp ? long_unsigned_type_node : long_integer_type_node; |
| if (type1 == long_long_integer_type_node |
| || type1 == long_long_unsigned_type_node) |
| return unsignedp |
| ? long_long_unsigned_type_node |
| : long_long_integer_type_node; |
| |
| for (i = 0; i < NUM_INT_N_ENTS; i ++) |
| if (int_n_enabled_p[i] |
| && (type1 == int_n_trees[i].unsigned_type |
| || type1 == int_n_trees[i].signed_type)) |
| return unsignedp |
| ? int_n_trees[i].unsigned_type |
| : int_n_trees[i].signed_type; |
| |
| #if HOST_BITS_PER_WIDE_INT >= 64 |
| if (type1 == intTI_type_node || type1 == unsigned_intTI_type_node) |
| return unsignedp ? unsigned_intTI_type_node : intTI_type_node; |
| #endif |
| if (type1 == intDI_type_node || type1 == unsigned_intDI_type_node) |
| return unsignedp ? unsigned_intDI_type_node : intDI_type_node; |
| if (type1 == intSI_type_node || type1 == unsigned_intSI_type_node) |
| return unsignedp ? unsigned_intSI_type_node : intSI_type_node; |
| if (type1 == intHI_type_node || type1 == unsigned_intHI_type_node) |
| return unsignedp ? unsigned_intHI_type_node : intHI_type_node; |
| if (type1 == intQI_type_node || type1 == unsigned_intQI_type_node) |
| return unsignedp ? unsigned_intQI_type_node : intQI_type_node; |
| |
| #define GIMPLE_FIXED_TYPES(NAME) \ |
| if (type1 == short_ ## NAME ## _type_node \ |
| || type1 == unsigned_short_ ## NAME ## _type_node) \ |
| return unsignedp ? unsigned_short_ ## NAME ## _type_node \ |
| : short_ ## NAME ## _type_node; \ |
| if (type1 == NAME ## _type_node \ |
| || type1 == unsigned_ ## NAME ## _type_node) \ |
| return unsignedp ? unsigned_ ## NAME ## _type_node \ |
| : NAME ## _type_node; \ |
| if (type1 == long_ ## NAME ## _type_node \ |
| || type1 == unsigned_long_ ## NAME ## _type_node) \ |
| return unsignedp ? unsigned_long_ ## NAME ## _type_node \ |
| : long_ ## NAME ## _type_node; \ |
| if (type1 == long_long_ ## NAME ## _type_node \ |
| || type1 == unsigned_long_long_ ## NAME ## _type_node) \ |
| return unsignedp ? unsigned_long_long_ ## NAME ## _type_node \ |
| : long_long_ ## NAME ## _type_node; |
| |
| #define GIMPLE_FIXED_MODE_TYPES(NAME) \ |
| if (type1 == NAME ## _type_node \ |
| || type1 == u ## NAME ## _type_node) \ |
| return unsignedp ? u ## NAME ## _type_node \ |
| : NAME ## _type_node; |
| |
| #define GIMPLE_FIXED_TYPES_SAT(NAME) \ |
| if (type1 == sat_ ## short_ ## NAME ## _type_node \ |
| || type1 == sat_ ## unsigned_short_ ## NAME ## _type_node) \ |
| return unsignedp ? sat_ ## unsigned_short_ ## NAME ## _type_node \ |
| : sat_ ## short_ ## NAME ## _type_node; \ |
| if (type1 == sat_ ## NAME ## _type_node \ |
| || type1 == sat_ ## unsigned_ ## NAME ## _type_node) \ |
| return unsignedp ? sat_ ## unsigned_ ## NAME ## _type_node \ |
| : sat_ ## NAME ## _type_node; \ |
| if (type1 == sat_ ## long_ ## NAME ## _type_node \ |
| || type1 == sat_ ## unsigned_long_ ## NAME ## _type_node) \ |
| return unsignedp ? sat_ ## unsigned_long_ ## NAME ## _type_node \ |
| : sat_ ## long_ ## NAME ## _type_node; \ |
| if (type1 == sat_ ## long_long_ ## NAME ## _type_node \ |
| || type1 == sat_ ## unsigned_long_long_ ## NAME ## _type_node) \ |
| return unsignedp ? sat_ ## unsigned_long_long_ ## NAME ## _type_node \ |
| : sat_ ## long_long_ ## NAME ## _type_node; |
| |
| #define GIMPLE_FIXED_MODE_TYPES_SAT(NAME) \ |
| if (type1 == sat_ ## NAME ## _type_node \ |
| || type1 == sat_ ## u ## NAME ## _type_node) \ |
| return unsignedp ? sat_ ## u ## NAME ## _type_node \ |
| : sat_ ## NAME ## _type_node; |
| |
| GIMPLE_FIXED_TYPES (fract); |
| GIMPLE_FIXED_TYPES_SAT (fract); |
| GIMPLE_FIXED_TYPES (accum); |
| GIMPLE_FIXED_TYPES_SAT (accum); |
| |
| GIMPLE_FIXED_MODE_TYPES (qq); |
| GIMPLE_FIXED_MODE_TYPES (hq); |
| GIMPLE_FIXED_MODE_TYPES (sq); |
| GIMPLE_FIXED_MODE_TYPES (dq); |
| GIMPLE_FIXED_MODE_TYPES (tq); |
| GIMPLE_FIXED_MODE_TYPES_SAT (qq); |
| GIMPLE_FIXED_MODE_TYPES_SAT (hq); |
| GIMPLE_FIXED_MODE_TYPES_SAT (sq); |
| GIMPLE_FIXED_MODE_TYPES_SAT (dq); |
| GIMPLE_FIXED_MODE_TYPES_SAT (tq); |
| GIMPLE_FIXED_MODE_TYPES (ha); |
| GIMPLE_FIXED_MODE_TYPES (sa); |
| GIMPLE_FIXED_MODE_TYPES (da); |
| GIMPLE_FIXED_MODE_TYPES (ta); |
| GIMPLE_FIXED_MODE_TYPES_SAT (ha); |
| GIMPLE_FIXED_MODE_TYPES_SAT (sa); |
| GIMPLE_FIXED_MODE_TYPES_SAT (da); |
| GIMPLE_FIXED_MODE_TYPES_SAT (ta); |
| |
| /* For ENUMERAL_TYPEs in C++, must check the mode of the types, not |
| the precision; they have precision set to match their range, but |
| may use a wider mode to match an ABI. If we change modes, we may |
| wind up with bad conversions. For INTEGER_TYPEs in C, must check |
| the precision as well, so as to yield correct results for |
| bit-field types. C++ does not have these separate bit-field |
| types, and producing a signed or unsigned variant of an |
| ENUMERAL_TYPE may cause other problems as well. */ |
| if (!INTEGRAL_TYPE_P (type) |
| || TYPE_UNSIGNED (type) == unsignedp) |
| return type; |
| |
| #define TYPE_OK(node) \ |
| (TYPE_MODE (type) == TYPE_MODE (node) \ |
| && TYPE_PRECISION (type) == TYPE_PRECISION (node)) |
| if (TYPE_OK (signed_char_type_node)) |
| return unsignedp ? unsigned_char_type_node : signed_char_type_node; |
| if (TYPE_OK (integer_type_node)) |
| return unsignedp ? unsigned_type_node : integer_type_node; |
| if (TYPE_OK (short_integer_type_node)) |
| return unsignedp ? short_unsigned_type_node : short_integer_type_node; |
| if (TYPE_OK (long_integer_type_node)) |
| return unsignedp ? long_unsigned_type_node : long_integer_type_node; |
| if (TYPE_OK (long_long_integer_type_node)) |
| return (unsignedp |
| ? long_long_unsigned_type_node |
| : long_long_integer_type_node); |
| |
| for (i = 0; i < NUM_INT_N_ENTS; i ++) |
| if (int_n_enabled_p[i] |
| && TYPE_MODE (type) == int_n_data[i].m |
| && TYPE_PRECISION (type) == int_n_data[i].bitsize) |
| return unsignedp |
| ? int_n_trees[i].unsigned_type |
| : int_n_trees[i].signed_type; |
| |
| #if HOST_BITS_PER_WIDE_INT >= 64 |
| if (TYPE_OK (intTI_type_node)) |
| return unsignedp ? unsigned_intTI_type_node : intTI_type_node; |
| #endif |
| if (TYPE_OK (intDI_type_node)) |
| return unsignedp ? unsigned_intDI_type_node : intDI_type_node; |
| if (TYPE_OK (intSI_type_node)) |
| return unsignedp ? unsigned_intSI_type_node : intSI_type_node; |
| if (TYPE_OK (intHI_type_node)) |
| return unsignedp ? unsigned_intHI_type_node : intHI_type_node; |
| if (TYPE_OK (intQI_type_node)) |
| return unsignedp ? unsigned_intQI_type_node : intQI_type_node; |
| |
| #undef GIMPLE_FIXED_TYPES |
| #undef GIMPLE_FIXED_MODE_TYPES |
| #undef GIMPLE_FIXED_TYPES_SAT |
| #undef GIMPLE_FIXED_MODE_TYPES_SAT |
| #undef TYPE_OK |
| |
| return build_nonstandard_integer_type (TYPE_PRECISION (type), unsignedp); |
| } |
| |
| |
| /* Return an unsigned type the same as TYPE in other respects. */ |
| |
| tree |
| gimple_unsigned_type (tree type) |
| { |
| return gimple_signed_or_unsigned_type (true, type); |
| } |
| |
| |
| /* Return a signed type the same as TYPE in other respects. */ |
| |
| tree |
| gimple_signed_type (tree type) |
| { |
| return gimple_signed_or_unsigned_type (false, type); |
| } |
| |
| |
| /* Return the typed-based alias set for T, which may be an expression |
| or a type. Return -1 if we don't do anything special. */ |
| |
| alias_set_type |
| gimple_get_alias_set (tree t) |
| { |
| tree u; |
| |
| /* Permit type-punning when accessing a union, provided the access |
| is directly through the union. For example, this code does not |
| permit taking the address of a union member and then storing |
| through it. Even the type-punning allowed here is a GCC |
| extension, albeit a common and useful one; the C standard says |
| that such accesses have implementation-defined behavior. */ |
| for (u = t; |
| TREE_CODE (u) == COMPONENT_REF || TREE_CODE (u) == ARRAY_REF; |
| u = TREE_OPERAND (u, 0)) |
| if (TREE_CODE (u) == COMPONENT_REF |
| && TREE_CODE (TREE_TYPE (TREE_OPERAND (u, 0))) == UNION_TYPE) |
| return 0; |
| |
| /* That's all the expressions we handle specially. */ |
| if (!TYPE_P (t)) |
| return -1; |
| |
| /* For convenience, follow the C standard when dealing with |
| character types. Any object may be accessed via an lvalue that |
| has character type. */ |
| if (t == char_type_node |
| || t == signed_char_type_node |
| || t == unsigned_char_type_node) |
| return 0; |
| |
| /* Allow aliasing between signed and unsigned variants of the same |
| type. We treat the signed variant as canonical. */ |
| if (TREE_CODE (t) == INTEGER_TYPE && TYPE_UNSIGNED (t)) |
| { |
| tree t1 = gimple_signed_type (t); |
| |
| /* t1 == t can happen for boolean nodes which are always unsigned. */ |
| if (t1 != t) |
| return get_alias_set (t1); |
| } |
| |
| return -1; |
| } |
| |
| |
| /* Helper for gimple_ior_addresses_taken_1. */ |
| |
| static bool |
| gimple_ior_addresses_taken_1 (gimple, tree addr, tree, void *data) |
| { |
| bitmap addresses_taken = (bitmap)data; |
| addr = get_base_address (addr); |
| if (addr |
| && DECL_P (addr)) |
| { |
| bitmap_set_bit (addresses_taken, DECL_UID (addr)); |
| return true; |
| } |
| return false; |
| } |
| |
| /* Set the bit for the uid of all decls that have their address taken |
| in STMT in the ADDRESSES_TAKEN bitmap. Returns true if there |
| were any in this stmt. */ |
| |
| bool |
| gimple_ior_addresses_taken (bitmap addresses_taken, gimple stmt) |
| { |
| return walk_stmt_load_store_addr_ops (stmt, addresses_taken, NULL, NULL, |
| gimple_ior_addresses_taken_1); |
| } |
| |
| |
| /* Return true if TYPE1 and TYPE2 are compatible enough for builtin |
| processing. */ |
| |
| static bool |
| validate_type (tree type1, tree type2) |
| { |
| if (INTEGRAL_TYPE_P (type1) |
| && INTEGRAL_TYPE_P (type2)) |
| ; |
| else if (POINTER_TYPE_P (type1) |
| && POINTER_TYPE_P (type2)) |
| ; |
| else if (TREE_CODE (type1) |
| != TREE_CODE (type2)) |
| return false; |
| return true; |
| } |
| |
| /* Return true when STMTs arguments and return value match those of FNDECL, |
| a decl of a builtin function. */ |
| |
| bool |
| gimple_builtin_call_types_compatible_p (const_gimple stmt, tree fndecl) |
| { |
| gcc_checking_assert (DECL_BUILT_IN_CLASS (fndecl) != NOT_BUILT_IN); |
| |
| tree ret = gimple_call_lhs (stmt); |
| if (ret |
| && !validate_type (TREE_TYPE (ret), TREE_TYPE (TREE_TYPE (fndecl)))) |
| return false; |
| |
| tree targs = TYPE_ARG_TYPES (TREE_TYPE (fndecl)); |
| unsigned nargs = gimple_call_num_args (stmt); |
| for (unsigned i = 0; i < nargs; ++i) |
| { |
| /* Variadic args follow. */ |
| if (!targs) |
| return true; |
| tree arg = gimple_call_arg (stmt, i); |
| if (!validate_type (TREE_TYPE (arg), TREE_VALUE (targs))) |
| return false; |
| targs = TREE_CHAIN (targs); |
| } |
| if (targs && !VOID_TYPE_P (TREE_VALUE (targs))) |
| return false; |
| return true; |
| } |
| |
| /* Return true when STMT is builtins call. */ |
| |
| bool |
| gimple_call_builtin_p (const_gimple stmt) |
| { |
| tree fndecl; |
| if (is_gimple_call (stmt) |
| && (fndecl = gimple_call_fndecl (stmt)) != NULL_TREE |
| && DECL_BUILT_IN_CLASS (fndecl) != NOT_BUILT_IN) |
| return gimple_builtin_call_types_compatible_p (stmt, fndecl); |
| return false; |
| } |
| |
| /* Return true when STMT is builtins call to CLASS. */ |
| |
| bool |
| gimple_call_builtin_p (const_gimple stmt, enum built_in_class klass) |
| { |
| tree fndecl; |
| if (is_gimple_call (stmt) |
| && (fndecl = gimple_call_fndecl (stmt)) != NULL_TREE |
| && DECL_BUILT_IN_CLASS (fndecl) == klass) |
| return gimple_builtin_call_types_compatible_p (stmt, fndecl); |
| return false; |
| } |
| |
| /* Return true when STMT is builtins call to CODE of CLASS. */ |
| |
| bool |
| gimple_call_builtin_p (const_gimple stmt, enum built_in_function code) |
| { |
| tree fndecl; |
| if (is_gimple_call (stmt) |
| && (fndecl = gimple_call_fndecl (stmt)) != NULL_TREE |
| && DECL_BUILT_IN_CLASS (fndecl) == BUILT_IN_NORMAL |
| && DECL_FUNCTION_CODE (fndecl) == code) |
| return gimple_builtin_call_types_compatible_p (stmt, fndecl); |
| return false; |
| } |
| |
| /* Return true if STMT clobbers memory. STMT is required to be a |
| GIMPLE_ASM. */ |
| |
| bool |
| gimple_asm_clobbers_memory_p (const gasm *stmt) |
| { |
| unsigned i; |
| |
| for (i = 0; i < gimple_asm_nclobbers (stmt); i++) |
| { |
| tree op = gimple_asm_clobber_op (stmt, i); |
| if (strcmp (TREE_STRING_POINTER (TREE_VALUE (op)), "memory") == 0) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /* Dump bitmap SET (assumed to contain VAR_DECLs) to FILE. */ |
| |
| void |
| dump_decl_set (FILE *file, bitmap set) |
| { |
| if (set) |
| { |
| bitmap_iterator bi; |
| unsigned i; |
| |
| fprintf (file, "{ "); |
| |
| EXECUTE_IF_SET_IN_BITMAP (set, 0, i, bi) |
| { |
| fprintf (file, "D.%u", i); |
| fprintf (file, " "); |
| } |
| |
| fprintf (file, "}"); |
| } |
| else |
| fprintf (file, "NIL"); |
| } |
| |
| /* Return true when CALL is a call stmt that definitely doesn't |
| free any memory or makes it unavailable otherwise. */ |
| bool |
| nonfreeing_call_p (gimple call) |
| { |
| if (gimple_call_builtin_p (call, BUILT_IN_NORMAL) |
| && gimple_call_flags (call) & ECF_LEAF) |
| switch (DECL_FUNCTION_CODE (gimple_call_fndecl (call))) |
| { |
| /* Just in case these become ECF_LEAF in the future. */ |
| case BUILT_IN_FREE: |
| case BUILT_IN_TM_FREE: |
| case BUILT_IN_REALLOC: |
| case BUILT_IN_STACK_RESTORE: |
| return false; |
| default: |
| return true; |
| } |
| else if (gimple_call_internal_p (call)) |
| switch (gimple_call_internal_fn (call)) |
| { |
| case IFN_ABNORMAL_DISPATCHER: |
| return true; |
| default: |
| if (gimple_call_flags (call) & ECF_LEAF) |
| return true; |
| return false; |
| } |
| |
| tree fndecl = gimple_call_fndecl (call); |
| if (!fndecl) |
| return false; |
| struct cgraph_node *n = cgraph_node::get (fndecl); |
| if (!n) |
| return false; |
| enum availability availability; |
| n = n->function_symbol (&availability); |
| if (!n || availability <= AVAIL_INTERPOSABLE) |
| return false; |
| return n->nonfreeing_fn; |
| } |
| |
| /* Callback for walk_stmt_load_store_ops. |
| |
| Return TRUE if OP will dereference the tree stored in DATA, FALSE |
| otherwise. |
| |
| This routine only makes a superficial check for a dereference. Thus |
| it must only be used if it is safe to return a false negative. */ |
| static bool |
| check_loadstore (gimple, tree op, tree, void *data) |
| { |
| if ((TREE_CODE (op) == MEM_REF || TREE_CODE (op) == TARGET_MEM_REF) |
| && operand_equal_p (TREE_OPERAND (op, 0), (tree)data, 0)) |
| return true; |
| return false; |
| } |
| |
| /* If OP can be inferred to be non-NULL after STMT executes, return true. |
| |
| DEREFERENCE is TRUE if we can use a pointer dereference to infer a |
| non-NULL range, FALSE otherwise. |
| |
| ATTRIBUTE is TRUE if we can use attributes to infer a non-NULL range |
| for function arguments and return values. FALSE otherwise. */ |
| |
| bool |
| infer_nonnull_range (gimple stmt, tree op, bool dereference, bool attribute) |
| { |
| /* We can only assume that a pointer dereference will yield |
| non-NULL if -fdelete-null-pointer-checks is enabled. */ |
| if (!flag_delete_null_pointer_checks |
| || !POINTER_TYPE_P (TREE_TYPE (op)) |
| || gimple_code (stmt) == GIMPLE_ASM) |
| return false; |
| |
| if (dereference |
| && walk_stmt_load_store_ops (stmt, (void *)op, |
| check_loadstore, check_loadstore)) |
| return true; |
| |
| if (attribute |
| && is_gimple_call (stmt) && !gimple_call_internal_p (stmt)) |
| { |
| tree fntype = gimple_call_fntype (stmt); |
| tree attrs = TYPE_ATTRIBUTES (fntype); |
| for (; attrs; attrs = TREE_CHAIN (attrs)) |
| { |
| attrs = lookup_attribute ("nonnull", attrs); |
| |
| /* If "nonnull" wasn't specified, we know nothing about |
| the argument. */ |
| if (attrs == NULL_TREE) |
| return false; |
| |
| /* If "nonnull" applies to all the arguments, then ARG |
| is non-null if it's in the argument list. */ |
| if (TREE_VALUE (attrs) == NULL_TREE) |
| { |
| for (unsigned int i = 0; i < gimple_call_num_args (stmt); i++) |
| { |
| if (POINTER_TYPE_P (TREE_TYPE (gimple_call_arg (stmt, i))) |
| && operand_equal_p (op, gimple_call_arg (stmt, i), 0)) |
| return true; |
| } |
| return false; |
| } |
| |
| /* Now see if op appears in the nonnull list. */ |
| for (tree t = TREE_VALUE (attrs); t; t = TREE_CHAIN (t)) |
| { |
| int idx = TREE_INT_CST_LOW (TREE_VALUE (t)) - 1; |
| tree arg = gimple_call_arg (stmt, idx); |
| if (operand_equal_p (op, arg, 0)) |
| return true; |
| } |
| } |
| } |
| |
| /* If this function is marked as returning non-null, then we can |
| infer OP is non-null if it is used in the return statement. */ |
| if (attribute) |
| if (greturn *return_stmt = dyn_cast <greturn *> (stmt)) |
| if (gimple_return_retval (return_stmt) |
| && operand_equal_p (gimple_return_retval (return_stmt), op, 0) |
| && lookup_attribute ("returns_nonnull", |
| TYPE_ATTRIBUTES (TREE_TYPE (current_function_decl)))) |
| return true; |
| |
| return false; |
| } |
| |
| /* Compare two case labels. Because the front end should already have |
| made sure that case ranges do not overlap, it is enough to only compare |
| the CASE_LOW values of each case label. */ |
| |
| static int |
| compare_case_labels (const void *p1, const void *p2) |
| { |
| const_tree const case1 = *(const_tree const*)p1; |
| const_tree const case2 = *(const_tree const*)p2; |
| |
| /* The 'default' case label always goes first. */ |
| if (!CASE_LOW (case1)) |
| return -1; |
| else if (!CASE_LOW (case2)) |
| return 1; |
| else |
| return tree_int_cst_compare (CASE_LOW (case1), CASE_LOW (case2)); |
| } |
| |
| /* Sort the case labels in LABEL_VEC in place in ascending order. */ |
| |
| void |
| sort_case_labels (vec<tree> label_vec) |
| { |
| label_vec.qsort (compare_case_labels); |
| } |
| |
| /* Prepare a vector of case labels to be used in a GIMPLE_SWITCH statement. |
| |
| LABELS is a vector that contains all case labels to look at. |
| |
| INDEX_TYPE is the type of the switch index expression. Case labels |
| in LABELS are discarded if their values are not in the value range |
| covered by INDEX_TYPE. The remaining case label values are folded |
| to INDEX_TYPE. |
| |
| If a default case exists in LABELS, it is removed from LABELS and |
| returned in DEFAULT_CASEP. If no default case exists, but the |
| case labels already cover the whole range of INDEX_TYPE, a default |
| case is returned pointing to one of the existing case labels. |
| Otherwise DEFAULT_CASEP is set to NULL_TREE. |
| |
| DEFAULT_CASEP may be NULL, in which case the above comment doesn't |
| apply and no action is taken regardless of whether a default case is |
| found or not. */ |
| |
| void |
| preprocess_case_label_vec_for_gimple (vec<tree> labels, |
| tree index_type, |
| tree *default_casep) |
| { |
| tree min_value, max_value; |
| tree default_case = NULL_TREE; |
| size_t i, len; |
| |
| i = 0; |
| min_value = TYPE_MIN_VALUE (index_type); |
| max_value = TYPE_MAX_VALUE (index_type); |
| while (i < labels.length ()) |
| { |
| tree elt = labels[i]; |
| tree low = CASE_LOW (elt); |
| tree high = CASE_HIGH (elt); |
| bool remove_element = FALSE; |
| |
| if (low) |
| { |
| gcc_checking_assert (TREE_CODE (low) == INTEGER_CST); |
| gcc_checking_assert (!high || TREE_CODE (high) == INTEGER_CST); |
| |
| /* This is a non-default case label, i.e. it has a value. |
| |
| See if the case label is reachable within the range of |
| the index type. Remove out-of-range case values. Turn |
| case ranges into a canonical form (high > low strictly) |
| and convert the case label values to the index type. |
| |
| NB: The type of gimple_switch_index() may be the promoted |
| type, but the case labels retain the original type. */ |
| |
| if (high) |
| { |
| /* This is a case range. Discard empty ranges. |
| If the bounds or the range are equal, turn this |
| into a simple (one-value) case. */ |
| int cmp = tree_int_cst_compare (high, low); |
| if (cmp < 0) |
| remove_element = TRUE; |
| else if (cmp == 0) |
| high = NULL_TREE; |
| } |
| |
| if (! high) |
| { |
| /* If the simple case value is unreachable, ignore it. */ |
| if ((TREE_CODE (min_value) == INTEGER_CST |
| && tree_int_cst_compare (low, min_value) < 0) |
| || (TREE_CODE (max_value) == INTEGER_CST |
| && tree_int_cst_compare (low, max_value) > 0)) |
| remove_element = TRUE; |
| else |
| low = fold_convert (index_type, low); |
| } |
| else |
| { |
| /* If the entire case range is unreachable, ignore it. */ |
| if ((TREE_CODE (min_value) == INTEGER_CST |
| && tree_int_cst_compare (high, min_value) < 0) |
| || (TREE_CODE (max_value) == INTEGER_CST |
| && tree_int_cst_compare (low, max_value) > 0)) |
| remove_element = TRUE; |
| else |
| { |
| /* If the lower bound is less than the index type's |
| minimum value, truncate the range bounds. */ |
| if (TREE_CODE (min_value) == INTEGER_CST |
| && tree_int_cst_compare (low, min_value) < 0) |
| low = min_value; |
| low = fold_convert (index_type, low); |
| |
| /* If the upper bound is greater than the index type's |
| maximum value, truncate the range bounds. */ |
| if (TREE_CODE (max_value) == INTEGER_CST |
| && tree_int_cst_compare (high, max_value) > 0) |
| high = max_value; |
| high = fold_convert (index_type, high); |
| |
| /* We may have folded a case range to a one-value case. */ |
| if (tree_int_cst_equal (low, high)) |
| high = NULL_TREE; |
| } |
| } |
| |
| CASE_LOW (elt) = low; |
| CASE_HIGH (elt) = high; |
| } |
| else |
| { |
| gcc_assert (!default_case); |
| default_case = elt; |
| /* The default case must be passed separately to the |
| gimple_build_switch routine. But if DEFAULT_CASEP |
| is NULL, we do not remove the default case (it would |
| be completely lost). */ |
| if (default_casep) |
| remove_element = TRUE; |
| } |
| |
| if (remove_element) |
| labels.ordered_remove (i); |
| else |
| i++; |
| } |
| len = i; |
| |
| if (!labels.is_empty ()) |
| sort_case_labels (labels); |
| |
| if (default_casep && !default_case) |
| { |
| /* If the switch has no default label, add one, so that we jump |
| around the switch body. If the labels already cover the whole |
| range of the switch index_type, add the default label pointing |
| to one of the existing labels. */ |
| if (len |
| && TYPE_MIN_VALUE (index_type) |
| && TYPE_MAX_VALUE (index_type) |
| && tree_int_cst_equal (CASE_LOW (labels[0]), |
| TYPE_MIN_VALUE (index_type))) |
| { |
| tree low, high = CASE_HIGH (labels[len - 1]); |
| if (!high) |
| high = CASE_LOW (labels[len - 1]); |
| if (tree_int_cst_equal (high, TYPE_MAX_VALUE (index_type))) |
| { |
| for (i = 1; i < len; i++) |
| { |
| high = CASE_LOW (labels[i]); |
| low = CASE_HIGH (labels[i - 1]); |
| if (!low) |
| low = CASE_LOW (labels[i - 1]); |
| if (wi::add (low, 1) != high) |
| break; |
| } |
| if (i == len) |
| { |
| tree label = CASE_LABEL (labels[0]); |
| default_case = build_case_label (NULL_TREE, NULL_TREE, |
| label); |
| } |
| } |
| } |
| } |
| |
| if (default_casep) |
| *default_casep = default_case; |
| } |
| |
| /* Set the location of all statements in SEQ to LOC. */ |
| |
| void |
| gimple_seq_set_location (gimple_seq seq, location_t loc) |
| { |
| for (gimple_stmt_iterator i = gsi_start (seq); !gsi_end_p (i); gsi_next (&i)) |
| gimple_set_location (gsi_stmt (i), loc); |
| } |
| |
| /* Release SSA_NAMEs in SEQ as well as the GIMPLE statements. */ |
| |
| void |
| gimple_seq_discard (gimple_seq seq) |
| { |
| gimple_stmt_iterator gsi; |
| |
| for (gsi = gsi_start (seq); !gsi_end_p (gsi); ) |
| { |
| gimple stmt = gsi_stmt (gsi); |
| gsi_remove (&gsi, true); |
| release_defs (stmt); |
| ggc_free (stmt); |
| } |
| } |
| |
| /* See if STMT now calls function that takes no parameters and if so, drop |
| call arguments. This is used when devirtualization machinery redirects |
| to __builtiln_unreacahble or __cxa_pure_virutal. */ |
| |
| void |
| maybe_remove_unused_call_args (struct function *fn, gimple stmt) |
| { |
| tree decl = gimple_call_fndecl (stmt); |
| if (TYPE_ARG_TYPES (TREE_TYPE (decl)) |
| && TREE_VALUE (TYPE_ARG_TYPES (TREE_TYPE (decl))) == void_type_node |
| && gimple_call_num_args (stmt)) |
| { |
| gimple_set_num_ops (stmt, 3); |
| update_stmt_fn (fn, stmt); |
| } |
| } |