| /* Predictive commoning. |
| Copyright (C) 2005-2015 Free Software Foundation, Inc. |
| |
| This file is part of GCC. |
| |
| GCC is free software; you can redistribute it and/or modify it |
| under the terms of the GNU General Public License as published by the |
| Free Software Foundation; either version 3, or (at your option) any |
| later version. |
| |
| GCC is distributed in the hope that it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with GCC; see the file COPYING3. If not see |
| <http://www.gnu.org/licenses/>. */ |
| |
| /* This file implements the predictive commoning optimization. Predictive |
| commoning can be viewed as CSE around a loop, and with some improvements, |
| as generalized strength reduction-- i.e., reusing values computed in |
| earlier iterations of a loop in the later ones. So far, the pass only |
| handles the most useful case, that is, reusing values of memory references. |
| If you think this is all just a special case of PRE, you are sort of right; |
| however, concentrating on loops is simpler, and makes it possible to |
| incorporate data dependence analysis to detect the opportunities, perform |
| loop unrolling to avoid copies together with renaming immediately, |
| and if needed, we could also take register pressure into account. |
| |
| Let us demonstrate what is done on an example: |
| |
| for (i = 0; i < 100; i++) |
| { |
| a[i+2] = a[i] + a[i+1]; |
| b[10] = b[10] + i; |
| c[i] = c[99 - i]; |
| d[i] = d[i + 1]; |
| } |
| |
| 1) We find data references in the loop, and split them to mutually |
| independent groups (i.e., we find components of a data dependence |
| graph). We ignore read-read dependences whose distance is not constant. |
| (TODO -- we could also ignore antidependences). In this example, we |
| find the following groups: |
| |
| a[i]{read}, a[i+1]{read}, a[i+2]{write} |
| b[10]{read}, b[10]{write} |
| c[99 - i]{read}, c[i]{write} |
| d[i + 1]{read}, d[i]{write} |
| |
| 2) Inside each of the group, we verify several conditions: |
| a) all the references must differ in indices only, and the indices |
| must all have the same step |
| b) the references must dominate loop latch (and thus, they must be |
| ordered by dominance relation). |
| c) the distance of the indices must be a small multiple of the step |
| We are then able to compute the difference of the references (# of |
| iterations before they point to the same place as the first of them). |
| Also, in case there are writes in the loop, we split the groups into |
| chains whose head is the write whose values are used by the reads in |
| the same chain. The chains are then processed independently, |
| making the further transformations simpler. Also, the shorter chains |
| need the same number of registers, but may require lower unrolling |
| factor in order to get rid of the copies on the loop latch. |
| |
| In our example, we get the following chains (the chain for c is invalid). |
| |
| a[i]{read,+0}, a[i+1]{read,-1}, a[i+2]{write,-2} |
| b[10]{read,+0}, b[10]{write,+0} |
| d[i + 1]{read,+0}, d[i]{write,+1} |
| |
| 3) For each read, we determine the read or write whose value it reuses, |
| together with the distance of this reuse. I.e. we take the last |
| reference before it with distance 0, or the last of the references |
| with the smallest positive distance to the read. Then, we remove |
| the references that are not used in any of these chains, discard the |
| empty groups, and propagate all the links so that they point to the |
| single root reference of the chain (adjusting their distance |
| appropriately). Some extra care needs to be taken for references with |
| step 0. In our example (the numbers indicate the distance of the |
| reuse), |
| |
| a[i] --> (*) 2, a[i+1] --> (*) 1, a[i+2] (*) |
| b[10] --> (*) 1, b[10] (*) |
| |
| 4) The chains are combined together if possible. If the corresponding |
| elements of two chains are always combined together with the same |
| operator, we remember just the result of this combination, instead |
| of remembering the values separately. We may need to perform |
| reassociation to enable combining, for example |
| |
| e[i] + f[i+1] + e[i+1] + f[i] |
| |
| can be reassociated as |
| |
| (e[i] + f[i]) + (e[i+1] + f[i+1]) |
| |
| and we can combine the chains for e and f into one chain. |
| |
| 5) For each root reference (end of the chain) R, let N be maximum distance |
| of a reference reusing its value. Variables R0 up to RN are created, |
| together with phi nodes that transfer values from R1 .. RN to |
| R0 .. R(N-1). |
| Initial values are loaded to R0..R(N-1) (in case not all references |
| must necessarily be accessed and they may trap, we may fail here; |
| TODO sometimes, the loads could be guarded by a check for the number |
| of iterations). Values loaded/stored in roots are also copied to |
| RN. Other reads are replaced with the appropriate variable Ri. |
| Everything is put to SSA form. |
| |
| As a small improvement, if R0 is dead after the root (i.e., all uses of |
| the value with the maximum distance dominate the root), we can avoid |
| creating RN and use R0 instead of it. |
| |
| In our example, we get (only the parts concerning a and b are shown): |
| for (i = 0; i < 100; i++) |
| { |
| f = phi (a[0], s); |
| s = phi (a[1], f); |
| x = phi (b[10], x); |
| |
| f = f + s; |
| a[i+2] = f; |
| x = x + i; |
| b[10] = x; |
| } |
| |
| 6) Factor F for unrolling is determined as the smallest common multiple of |
| (N + 1) for each root reference (N for references for that we avoided |
| creating RN). If F and the loop is small enough, loop is unrolled F |
| times. The stores to RN (R0) in the copies of the loop body are |
| periodically replaced with R0, R1, ... (R1, R2, ...), so that they can |
| be coalesced and the copies can be eliminated. |
| |
| TODO -- copy propagation and other optimizations may change the live |
| ranges of the temporary registers and prevent them from being coalesced; |
| this may increase the register pressure. |
| |
| In our case, F = 2 and the (main loop of the) result is |
| |
| for (i = 0; i < ...; i += 2) |
| { |
| f = phi (a[0], f); |
| s = phi (a[1], s); |
| x = phi (b[10], x); |
| |
| f = f + s; |
| a[i+2] = f; |
| x = x + i; |
| b[10] = x; |
| |
| s = s + f; |
| a[i+3] = s; |
| x = x + i; |
| b[10] = x; |
| } |
| |
| TODO -- stores killing other stores can be taken into account, e.g., |
| for (i = 0; i < n; i++) |
| { |
| a[i] = 1; |
| a[i+2] = 2; |
| } |
| |
| can be replaced with |
| |
| t0 = a[0]; |
| t1 = a[1]; |
| for (i = 0; i < n; i++) |
| { |
| a[i] = 1; |
| t2 = 2; |
| t0 = t1; |
| t1 = t2; |
| } |
| a[n] = t0; |
| a[n+1] = t1; |
| |
| The interesting part is that this would generalize store motion; still, since |
| sm is performed elsewhere, it does not seem that important. |
| |
| Predictive commoning can be generalized for arbitrary computations (not |
| just memory loads), and also nontrivial transfer functions (e.g., replacing |
| i * i with ii_last + 2 * i + 1), to generalize strength reduction. */ |
| |
| #include "config.h" |
| #include "system.h" |
| #include "coretypes.h" |
| #include "tm.h" |
| #include "hash-set.h" |
| #include "machmode.h" |
| #include "vec.h" |
| #include "double-int.h" |
| #include "input.h" |
| #include "alias.h" |
| #include "symtab.h" |
| #include "wide-int.h" |
| #include "inchash.h" |
| #include "tree.h" |
| #include "fold-const.h" |
| #include "tm_p.h" |
| #include "cfgloop.h" |
| #include "predict.h" |
| #include "hard-reg-set.h" |
| #include "function.h" |
| #include "dominance.h" |
| #include "cfg.h" |
| #include "basic-block.h" |
| #include "tree-ssa-alias.h" |
| #include "internal-fn.h" |
| #include "tree-eh.h" |
| #include "gimple-expr.h" |
| #include "is-a.h" |
| #include "gimple.h" |
| #include "gimplify.h" |
| #include "gimple-iterator.h" |
| #include "gimplify-me.h" |
| #include "gimple-ssa.h" |
| #include "tree-phinodes.h" |
| #include "ssa-iterators.h" |
| #include "stringpool.h" |
| #include "tree-ssanames.h" |
| #include "tree-ssa-loop-ivopts.h" |
| #include "tree-ssa-loop-manip.h" |
| #include "tree-ssa-loop-niter.h" |
| #include "tree-ssa-loop.h" |
| #include "tree-into-ssa.h" |
| #include "hashtab.h" |
| #include "rtl.h" |
| #include "flags.h" |
| #include "statistics.h" |
| #include "real.h" |
| #include "fixed-value.h" |
| #include "insn-config.h" |
| #include "expmed.h" |
| #include "dojump.h" |
| #include "explow.h" |
| #include "calls.h" |
| #include "emit-rtl.h" |
| #include "varasm.h" |
| #include "stmt.h" |
| #include "expr.h" |
| #include "tree-dfa.h" |
| #include "tree-ssa.h" |
| #include "tree-data-ref.h" |
| #include "tree-scalar-evolution.h" |
| #include "tree-chrec.h" |
| #include "params.h" |
| #include "gimple-pretty-print.h" |
| #include "tree-pass.h" |
| #include "tree-affine.h" |
| #include "tree-inline.h" |
| #include "wide-int-print.h" |
| #include "builtins.h" |
| |
| /* The maximum number of iterations between the considered memory |
| references. */ |
| |
| #define MAX_DISTANCE (target_avail_regs < 16 ? 4 : 8) |
| |
| /* Data references (or phi nodes that carry data reference values across |
| loop iterations). */ |
| |
| typedef struct dref_d |
| { |
| /* The reference itself. */ |
| struct data_reference *ref; |
| |
| /* The statement in that the reference appears. */ |
| gimple stmt; |
| |
| /* In case that STMT is a phi node, this field is set to the SSA name |
| defined by it in replace_phis_by_defined_names (in order to avoid |
| pointing to phi node that got reallocated in the meantime). */ |
| tree name_defined_by_phi; |
| |
| /* Distance of the reference from the root of the chain (in number of |
| iterations of the loop). */ |
| unsigned distance; |
| |
| /* Number of iterations offset from the first reference in the component. */ |
| widest_int offset; |
| |
| /* Number of the reference in a component, in dominance ordering. */ |
| unsigned pos; |
| |
| /* True if the memory reference is always accessed when the loop is |
| entered. */ |
| unsigned always_accessed : 1; |
| } *dref; |
| |
| |
| /* Type of the chain of the references. */ |
| |
| enum chain_type |
| { |
| /* The addresses of the references in the chain are constant. */ |
| CT_INVARIANT, |
| |
| /* There are only loads in the chain. */ |
| CT_LOAD, |
| |
| /* Root of the chain is store, the rest are loads. */ |
| CT_STORE_LOAD, |
| |
| /* A combination of two chains. */ |
| CT_COMBINATION |
| }; |
| |
| /* Chains of data references. */ |
| |
| typedef struct chain |
| { |
| /* Type of the chain. */ |
| enum chain_type type; |
| |
| /* For combination chains, the operator and the two chains that are |
| combined, and the type of the result. */ |
| enum tree_code op; |
| tree rslt_type; |
| struct chain *ch1, *ch2; |
| |
| /* The references in the chain. */ |
| vec<dref> refs; |
| |
| /* The maximum distance of the reference in the chain from the root. */ |
| unsigned length; |
| |
| /* The variables used to copy the value throughout iterations. */ |
| vec<tree> vars; |
| |
| /* Initializers for the variables. */ |
| vec<tree> inits; |
| |
| /* True if there is a use of a variable with the maximal distance |
| that comes after the root in the loop. */ |
| unsigned has_max_use_after : 1; |
| |
| /* True if all the memory references in the chain are always accessed. */ |
| unsigned all_always_accessed : 1; |
| |
| /* True if this chain was combined together with some other chain. */ |
| unsigned combined : 1; |
| } *chain_p; |
| |
| |
| /* Describes the knowledge about the step of the memory references in |
| the component. */ |
| |
| enum ref_step_type |
| { |
| /* The step is zero. */ |
| RS_INVARIANT, |
| |
| /* The step is nonzero. */ |
| RS_NONZERO, |
| |
| /* The step may or may not be nonzero. */ |
| RS_ANY |
| }; |
| |
| /* Components of the data dependence graph. */ |
| |
| struct component |
| { |
| /* The references in the component. */ |
| vec<dref> refs; |
| |
| /* What we know about the step of the references in the component. */ |
| enum ref_step_type comp_step; |
| |
| /* Next component in the list. */ |
| struct component *next; |
| }; |
| |
| /* Bitmap of ssa names defined by looparound phi nodes covered by chains. */ |
| |
| static bitmap looparound_phis; |
| |
| /* Cache used by tree_to_aff_combination_expand. */ |
| |
| static hash_map<tree, name_expansion *> *name_expansions; |
| |
| /* Dumps data reference REF to FILE. */ |
| |
| extern void dump_dref (FILE *, dref); |
| void |
| dump_dref (FILE *file, dref ref) |
| { |
| if (ref->ref) |
| { |
| fprintf (file, " "); |
| print_generic_expr (file, DR_REF (ref->ref), TDF_SLIM); |
| fprintf (file, " (id %u%s)\n", ref->pos, |
| DR_IS_READ (ref->ref) ? "" : ", write"); |
| |
| fprintf (file, " offset "); |
| print_decs (ref->offset, file); |
| fprintf (file, "\n"); |
| |
| fprintf (file, " distance %u\n", ref->distance); |
| } |
| else |
| { |
| if (gimple_code (ref->stmt) == GIMPLE_PHI) |
| fprintf (file, " looparound ref\n"); |
| else |
| fprintf (file, " combination ref\n"); |
| fprintf (file, " in statement "); |
| print_gimple_stmt (file, ref->stmt, 0, TDF_SLIM); |
| fprintf (file, "\n"); |
| fprintf (file, " distance %u\n", ref->distance); |
| } |
| |
| } |
| |
| /* Dumps CHAIN to FILE. */ |
| |
| extern void dump_chain (FILE *, chain_p); |
| void |
| dump_chain (FILE *file, chain_p chain) |
| { |
| dref a; |
| const char *chain_type; |
| unsigned i; |
| tree var; |
| |
| switch (chain->type) |
| { |
| case CT_INVARIANT: |
| chain_type = "Load motion"; |
| break; |
| |
| case CT_LOAD: |
| chain_type = "Loads-only"; |
| break; |
| |
| case CT_STORE_LOAD: |
| chain_type = "Store-loads"; |
| break; |
| |
| case CT_COMBINATION: |
| chain_type = "Combination"; |
| break; |
| |
| default: |
| gcc_unreachable (); |
| } |
| |
| fprintf (file, "%s chain %p%s\n", chain_type, (void *) chain, |
| chain->combined ? " (combined)" : ""); |
| if (chain->type != CT_INVARIANT) |
| fprintf (file, " max distance %u%s\n", chain->length, |
| chain->has_max_use_after ? "" : ", may reuse first"); |
| |
| if (chain->type == CT_COMBINATION) |
| { |
| fprintf (file, " equal to %p %s %p in type ", |
| (void *) chain->ch1, op_symbol_code (chain->op), |
| (void *) chain->ch2); |
| print_generic_expr (file, chain->rslt_type, TDF_SLIM); |
| fprintf (file, "\n"); |
| } |
| |
| if (chain->vars.exists ()) |
| { |
| fprintf (file, " vars"); |
| FOR_EACH_VEC_ELT (chain->vars, i, var) |
| { |
| fprintf (file, " "); |
| print_generic_expr (file, var, TDF_SLIM); |
| } |
| fprintf (file, "\n"); |
| } |
| |
| if (chain->inits.exists ()) |
| { |
| fprintf (file, " inits"); |
| FOR_EACH_VEC_ELT (chain->inits, i, var) |
| { |
| fprintf (file, " "); |
| print_generic_expr (file, var, TDF_SLIM); |
| } |
| fprintf (file, "\n"); |
| } |
| |
| fprintf (file, " references:\n"); |
| FOR_EACH_VEC_ELT (chain->refs, i, a) |
| dump_dref (file, a); |
| |
| fprintf (file, "\n"); |
| } |
| |
| /* Dumps CHAINS to FILE. */ |
| |
| extern void dump_chains (FILE *, vec<chain_p> ); |
| void |
| dump_chains (FILE *file, vec<chain_p> chains) |
| { |
| chain_p chain; |
| unsigned i; |
| |
| FOR_EACH_VEC_ELT (chains, i, chain) |
| dump_chain (file, chain); |
| } |
| |
| /* Dumps COMP to FILE. */ |
| |
| extern void dump_component (FILE *, struct component *); |
| void |
| dump_component (FILE *file, struct component *comp) |
| { |
| dref a; |
| unsigned i; |
| |
| fprintf (file, "Component%s:\n", |
| comp->comp_step == RS_INVARIANT ? " (invariant)" : ""); |
| FOR_EACH_VEC_ELT (comp->refs, i, a) |
| dump_dref (file, a); |
| fprintf (file, "\n"); |
| } |
| |
| /* Dumps COMPS to FILE. */ |
| |
| extern void dump_components (FILE *, struct component *); |
| void |
| dump_components (FILE *file, struct component *comps) |
| { |
| struct component *comp; |
| |
| for (comp = comps; comp; comp = comp->next) |
| dump_component (file, comp); |
| } |
| |
| /* Frees a chain CHAIN. */ |
| |
| static void |
| release_chain (chain_p chain) |
| { |
| dref ref; |
| unsigned i; |
| |
| if (chain == NULL) |
| return; |
| |
| FOR_EACH_VEC_ELT (chain->refs, i, ref) |
| free (ref); |
| |
| chain->refs.release (); |
| chain->vars.release (); |
| chain->inits.release (); |
| |
| free (chain); |
| } |
| |
| /* Frees CHAINS. */ |
| |
| static void |
| release_chains (vec<chain_p> chains) |
| { |
| unsigned i; |
| chain_p chain; |
| |
| FOR_EACH_VEC_ELT (chains, i, chain) |
| release_chain (chain); |
| chains.release (); |
| } |
| |
| /* Frees a component COMP. */ |
| |
| static void |
| release_component (struct component *comp) |
| { |
| comp->refs.release (); |
| free (comp); |
| } |
| |
| /* Frees list of components COMPS. */ |
| |
| static void |
| release_components (struct component *comps) |
| { |
| struct component *act, *next; |
| |
| for (act = comps; act; act = next) |
| { |
| next = act->next; |
| release_component (act); |
| } |
| } |
| |
| /* Finds a root of tree given by FATHERS containing A, and performs path |
| shortening. */ |
| |
| static unsigned |
| component_of (unsigned fathers[], unsigned a) |
| { |
| unsigned root, n; |
| |
| for (root = a; root != fathers[root]; root = fathers[root]) |
| continue; |
| |
| for (; a != root; a = n) |
| { |
| n = fathers[a]; |
| fathers[a] = root; |
| } |
| |
| return root; |
| } |
| |
| /* Join operation for DFU. FATHERS gives the tree, SIZES are sizes of the |
| components, A and B are components to merge. */ |
| |
| static void |
| merge_comps (unsigned fathers[], unsigned sizes[], unsigned a, unsigned b) |
| { |
| unsigned ca = component_of (fathers, a); |
| unsigned cb = component_of (fathers, b); |
| |
| if (ca == cb) |
| return; |
| |
| if (sizes[ca] < sizes[cb]) |
| { |
| sizes[cb] += sizes[ca]; |
| fathers[ca] = cb; |
| } |
| else |
| { |
| sizes[ca] += sizes[cb]; |
| fathers[cb] = ca; |
| } |
| } |
| |
| /* Returns true if A is a reference that is suitable for predictive commoning |
| in the innermost loop that contains it. REF_STEP is set according to the |
| step of the reference A. */ |
| |
| static bool |
| suitable_reference_p (struct data_reference *a, enum ref_step_type *ref_step) |
| { |
| tree ref = DR_REF (a), step = DR_STEP (a); |
| |
| if (!step |
| || TREE_THIS_VOLATILE (ref) |
| || !is_gimple_reg_type (TREE_TYPE (ref)) |
| || tree_could_throw_p (ref)) |
| return false; |
| |
| if (integer_zerop (step)) |
| *ref_step = RS_INVARIANT; |
| else if (integer_nonzerop (step)) |
| *ref_step = RS_NONZERO; |
| else |
| *ref_step = RS_ANY; |
| |
| return true; |
| } |
| |
| /* Stores DR_OFFSET (DR) + DR_INIT (DR) to OFFSET. */ |
| |
| static void |
| aff_combination_dr_offset (struct data_reference *dr, aff_tree *offset) |
| { |
| tree type = TREE_TYPE (DR_OFFSET (dr)); |
| aff_tree delta; |
| |
| tree_to_aff_combination_expand (DR_OFFSET (dr), type, offset, |
| &name_expansions); |
| aff_combination_const (&delta, type, wi::to_widest (DR_INIT (dr))); |
| aff_combination_add (offset, &delta); |
| } |
| |
| /* Determines number of iterations of the innermost enclosing loop before B |
| refers to exactly the same location as A and stores it to OFF. If A and |
| B do not have the same step, they never meet, or anything else fails, |
| returns false, otherwise returns true. Both A and B are assumed to |
| satisfy suitable_reference_p. */ |
| |
| static bool |
| determine_offset (struct data_reference *a, struct data_reference *b, |
| widest_int *off) |
| { |
| aff_tree diff, baseb, step; |
| tree typea, typeb; |
| |
| /* Check that both the references access the location in the same type. */ |
| typea = TREE_TYPE (DR_REF (a)); |
| typeb = TREE_TYPE (DR_REF (b)); |
| if (!useless_type_conversion_p (typeb, typea)) |
| return false; |
| |
| /* Check whether the base address and the step of both references is the |
| same. */ |
| if (!operand_equal_p (DR_STEP (a), DR_STEP (b), 0) |
| || !operand_equal_p (DR_BASE_ADDRESS (a), DR_BASE_ADDRESS (b), 0)) |
| return false; |
| |
| if (integer_zerop (DR_STEP (a))) |
| { |
| /* If the references have loop invariant address, check that they access |
| exactly the same location. */ |
| *off = 0; |
| return (operand_equal_p (DR_OFFSET (a), DR_OFFSET (b), 0) |
| && operand_equal_p (DR_INIT (a), DR_INIT (b), 0)); |
| } |
| |
| /* Compare the offsets of the addresses, and check whether the difference |
| is a multiple of step. */ |
| aff_combination_dr_offset (a, &diff); |
| aff_combination_dr_offset (b, &baseb); |
| aff_combination_scale (&baseb, -1); |
| aff_combination_add (&diff, &baseb); |
| |
| tree_to_aff_combination_expand (DR_STEP (a), TREE_TYPE (DR_STEP (a)), |
| &step, &name_expansions); |
| return aff_combination_constant_multiple_p (&diff, &step, off); |
| } |
| |
| /* Returns the last basic block in LOOP for that we are sure that |
| it is executed whenever the loop is entered. */ |
| |
| static basic_block |
| last_always_executed_block (struct loop *loop) |
| { |
| unsigned i; |
| vec<edge> exits = get_loop_exit_edges (loop); |
| edge ex; |
| basic_block last = loop->latch; |
| |
| FOR_EACH_VEC_ELT (exits, i, ex) |
| last = nearest_common_dominator (CDI_DOMINATORS, last, ex->src); |
| exits.release (); |
| |
| return last; |
| } |
| |
| /* Splits dependence graph on DATAREFS described by DEPENDS to components. */ |
| |
| static struct component * |
| split_data_refs_to_components (struct loop *loop, |
| vec<data_reference_p> datarefs, |
| vec<ddr_p> depends) |
| { |
| unsigned i, n = datarefs.length (); |
| unsigned ca, ia, ib, bad; |
| unsigned *comp_father = XNEWVEC (unsigned, n + 1); |
| unsigned *comp_size = XNEWVEC (unsigned, n + 1); |
| struct component **comps; |
| struct data_reference *dr, *dra, *drb; |
| struct data_dependence_relation *ddr; |
| struct component *comp_list = NULL, *comp; |
| dref dataref; |
| basic_block last_always_executed = last_always_executed_block (loop); |
| |
| FOR_EACH_VEC_ELT (datarefs, i, dr) |
| { |
| if (!DR_REF (dr)) |
| { |
| /* A fake reference for call or asm_expr that may clobber memory; |
| just fail. */ |
| goto end; |
| } |
| /* predcom pass isn't prepared to handle calls with data references. */ |
| if (is_gimple_call (DR_STMT (dr))) |
| goto end; |
| dr->aux = (void *) (size_t) i; |
| comp_father[i] = i; |
| comp_size[i] = 1; |
| } |
| |
| /* A component reserved for the "bad" data references. */ |
| comp_father[n] = n; |
| comp_size[n] = 1; |
| |
| FOR_EACH_VEC_ELT (datarefs, i, dr) |
| { |
| enum ref_step_type dummy; |
| |
| if (!suitable_reference_p (dr, &dummy)) |
| { |
| ia = (unsigned) (size_t) dr->aux; |
| merge_comps (comp_father, comp_size, n, ia); |
| } |
| } |
| |
| FOR_EACH_VEC_ELT (depends, i, ddr) |
| { |
| widest_int dummy_off; |
| |
| if (DDR_ARE_DEPENDENT (ddr) == chrec_known) |
| continue; |
| |
| dra = DDR_A (ddr); |
| drb = DDR_B (ddr); |
| ia = component_of (comp_father, (unsigned) (size_t) dra->aux); |
| ib = component_of (comp_father, (unsigned) (size_t) drb->aux); |
| if (ia == ib) |
| continue; |
| |
| bad = component_of (comp_father, n); |
| |
| /* If both A and B are reads, we may ignore unsuitable dependences. */ |
| if (DR_IS_READ (dra) && DR_IS_READ (drb)) |
| { |
| if (ia == bad || ib == bad |
| || !determine_offset (dra, drb, &dummy_off)) |
| continue; |
| } |
| /* If A is read and B write or vice versa and there is unsuitable |
| dependence, instead of merging both components into a component |
| that will certainly not pass suitable_component_p, just put the |
| read into bad component, perhaps at least the write together with |
| all the other data refs in it's component will be optimizable. */ |
| else if (DR_IS_READ (dra) && ib != bad) |
| { |
| if (ia == bad) |
| continue; |
| else if (!determine_offset (dra, drb, &dummy_off)) |
| { |
| merge_comps (comp_father, comp_size, bad, ia); |
| continue; |
| } |
| } |
| else if (DR_IS_READ (drb) && ia != bad) |
| { |
| if (ib == bad) |
| continue; |
| else if (!determine_offset (dra, drb, &dummy_off)) |
| { |
| merge_comps (comp_father, comp_size, bad, ib); |
| continue; |
| } |
| } |
| |
| merge_comps (comp_father, comp_size, ia, ib); |
| } |
| |
| comps = XCNEWVEC (struct component *, n); |
| bad = component_of (comp_father, n); |
| FOR_EACH_VEC_ELT (datarefs, i, dr) |
| { |
| ia = (unsigned) (size_t) dr->aux; |
| ca = component_of (comp_father, ia); |
| if (ca == bad) |
| continue; |
| |
| comp = comps[ca]; |
| if (!comp) |
| { |
| comp = XCNEW (struct component); |
| comp->refs.create (comp_size[ca]); |
| comps[ca] = comp; |
| } |
| |
| dataref = XCNEW (struct dref_d); |
| dataref->ref = dr; |
| dataref->stmt = DR_STMT (dr); |
| dataref->offset = 0; |
| dataref->distance = 0; |
| |
| dataref->always_accessed |
| = dominated_by_p (CDI_DOMINATORS, last_always_executed, |
| gimple_bb (dataref->stmt)); |
| dataref->pos = comp->refs.length (); |
| comp->refs.quick_push (dataref); |
| } |
| |
| for (i = 0; i < n; i++) |
| { |
| comp = comps[i]; |
| if (comp) |
| { |
| comp->next = comp_list; |
| comp_list = comp; |
| } |
| } |
| free (comps); |
| |
| end: |
| free (comp_father); |
| free (comp_size); |
| return comp_list; |
| } |
| |
| /* Returns true if the component COMP satisfies the conditions |
| described in 2) at the beginning of this file. LOOP is the current |
| loop. */ |
| |
| static bool |
| suitable_component_p (struct loop *loop, struct component *comp) |
| { |
| unsigned i; |
| dref a, first; |
| basic_block ba, bp = loop->header; |
| bool ok, has_write = false; |
| |
| FOR_EACH_VEC_ELT (comp->refs, i, a) |
| { |
| ba = gimple_bb (a->stmt); |
| |
| if (!just_once_each_iteration_p (loop, ba)) |
| return false; |
| |
| gcc_assert (dominated_by_p (CDI_DOMINATORS, ba, bp)); |
| bp = ba; |
| |
| if (DR_IS_WRITE (a->ref)) |
| has_write = true; |
| } |
| |
| first = comp->refs[0]; |
| ok = suitable_reference_p (first->ref, &comp->comp_step); |
| gcc_assert (ok); |
| first->offset = 0; |
| |
| for (i = 1; comp->refs.iterate (i, &a); i++) |
| { |
| if (!determine_offset (first->ref, a->ref, &a->offset)) |
| return false; |
| |
| #ifdef ENABLE_CHECKING |
| { |
| enum ref_step_type a_step; |
| ok = suitable_reference_p (a->ref, &a_step); |
| gcc_assert (ok && a_step == comp->comp_step); |
| } |
| #endif |
| } |
| |
| /* If there is a write inside the component, we must know whether the |
| step is nonzero or not -- we would not otherwise be able to recognize |
| whether the value accessed by reads comes from the OFFSET-th iteration |
| or the previous one. */ |
| if (has_write && comp->comp_step == RS_ANY) |
| return false; |
| |
| return true; |
| } |
| |
| /* Check the conditions on references inside each of components COMPS, |
| and remove the unsuitable components from the list. The new list |
| of components is returned. The conditions are described in 2) at |
| the beginning of this file. LOOP is the current loop. */ |
| |
| static struct component * |
| filter_suitable_components (struct loop *loop, struct component *comps) |
| { |
| struct component **comp, *act; |
| |
| for (comp = &comps; *comp; ) |
| { |
| act = *comp; |
| if (suitable_component_p (loop, act)) |
| comp = &act->next; |
| else |
| { |
| dref ref; |
| unsigned i; |
| |
| *comp = act->next; |
| FOR_EACH_VEC_ELT (act->refs, i, ref) |
| free (ref); |
| release_component (act); |
| } |
| } |
| |
| return comps; |
| } |
| |
| /* Compares two drefs A and B by their offset and position. Callback for |
| qsort. */ |
| |
| static int |
| order_drefs (const void *a, const void *b) |
| { |
| const dref *const da = (const dref *) a; |
| const dref *const db = (const dref *) b; |
| int offcmp = wi::cmps ((*da)->offset, (*db)->offset); |
| |
| if (offcmp != 0) |
| return offcmp; |
| |
| return (*da)->pos - (*db)->pos; |
| } |
| |
| /* Returns root of the CHAIN. */ |
| |
| static inline dref |
| get_chain_root (chain_p chain) |
| { |
| return chain->refs[0]; |
| } |
| |
| /* Adds REF to the chain CHAIN. */ |
| |
| static void |
| add_ref_to_chain (chain_p chain, dref ref) |
| { |
| dref root = get_chain_root (chain); |
| |
| gcc_assert (wi::les_p (root->offset, ref->offset)); |
| widest_int dist = ref->offset - root->offset; |
| if (wi::leu_p (MAX_DISTANCE, dist)) |
| { |
| free (ref); |
| return; |
| } |
| gcc_assert (wi::fits_uhwi_p (dist)); |
| |
| chain->refs.safe_push (ref); |
| |
| ref->distance = dist.to_uhwi (); |
| |
| if (ref->distance >= chain->length) |
| { |
| chain->length = ref->distance; |
| chain->has_max_use_after = false; |
| } |
| |
| if (ref->distance == chain->length |
| && ref->pos > root->pos) |
| chain->has_max_use_after = true; |
| |
| chain->all_always_accessed &= ref->always_accessed; |
| } |
| |
| /* Returns the chain for invariant component COMP. */ |
| |
| static chain_p |
| make_invariant_chain (struct component *comp) |
| { |
| chain_p chain = XCNEW (struct chain); |
| unsigned i; |
| dref ref; |
| |
| chain->type = CT_INVARIANT; |
| |
| chain->all_always_accessed = true; |
| |
| FOR_EACH_VEC_ELT (comp->refs, i, ref) |
| { |
| chain->refs.safe_push (ref); |
| chain->all_always_accessed &= ref->always_accessed; |
| } |
| |
| return chain; |
| } |
| |
| /* Make a new chain rooted at REF. */ |
| |
| static chain_p |
| make_rooted_chain (dref ref) |
| { |
| chain_p chain = XCNEW (struct chain); |
| |
| chain->type = DR_IS_READ (ref->ref) ? CT_LOAD : CT_STORE_LOAD; |
| |
| chain->refs.safe_push (ref); |
| chain->all_always_accessed = ref->always_accessed; |
| |
| ref->distance = 0; |
| |
| return chain; |
| } |
| |
| /* Returns true if CHAIN is not trivial. */ |
| |
| static bool |
| nontrivial_chain_p (chain_p chain) |
| { |
| return chain != NULL && chain->refs.length () > 1; |
| } |
| |
| /* Returns the ssa name that contains the value of REF, or NULL_TREE if there |
| is no such name. */ |
| |
| static tree |
| name_for_ref (dref ref) |
| { |
| tree name; |
| |
| if (is_gimple_assign (ref->stmt)) |
| { |
| if (!ref->ref || DR_IS_READ (ref->ref)) |
| name = gimple_assign_lhs (ref->stmt); |
| else |
| name = gimple_assign_rhs1 (ref->stmt); |
| } |
| else |
| name = PHI_RESULT (ref->stmt); |
| |
| return (TREE_CODE (name) == SSA_NAME ? name : NULL_TREE); |
| } |
| |
| /* Returns true if REF is a valid initializer for ROOT with given DISTANCE (in |
| iterations of the innermost enclosing loop). */ |
| |
| static bool |
| valid_initializer_p (struct data_reference *ref, |
| unsigned distance, struct data_reference *root) |
| { |
| aff_tree diff, base, step; |
| widest_int off; |
| |
| /* Both REF and ROOT must be accessing the same object. */ |
| if (!operand_equal_p (DR_BASE_ADDRESS (ref), DR_BASE_ADDRESS (root), 0)) |
| return false; |
| |
| /* The initializer is defined outside of loop, hence its address must be |
| invariant inside the loop. */ |
| gcc_assert (integer_zerop (DR_STEP (ref))); |
| |
| /* If the address of the reference is invariant, initializer must access |
| exactly the same location. */ |
| if (integer_zerop (DR_STEP (root))) |
| return (operand_equal_p (DR_OFFSET (ref), DR_OFFSET (root), 0) |
| && operand_equal_p (DR_INIT (ref), DR_INIT (root), 0)); |
| |
| /* Verify that this index of REF is equal to the root's index at |
| -DISTANCE-th iteration. */ |
| aff_combination_dr_offset (root, &diff); |
| aff_combination_dr_offset (ref, &base); |
| aff_combination_scale (&base, -1); |
| aff_combination_add (&diff, &base); |
| |
| tree_to_aff_combination_expand (DR_STEP (root), TREE_TYPE (DR_STEP (root)), |
| &step, &name_expansions); |
| if (!aff_combination_constant_multiple_p (&diff, &step, &off)) |
| return false; |
| |
| if (off != distance) |
| return false; |
| |
| return true; |
| } |
| |
| /* Finds looparound phi node of LOOP that copies the value of REF, and if its |
| initial value is correct (equal to initial value of REF shifted by one |
| iteration), returns the phi node. Otherwise, NULL_TREE is returned. ROOT |
| is the root of the current chain. */ |
| |
| static gphi * |
| find_looparound_phi (struct loop *loop, dref ref, dref root) |
| { |
| tree name, init, init_ref; |
| gphi *phi = NULL; |
| gimple init_stmt; |
| edge latch = loop_latch_edge (loop); |
| struct data_reference init_dr; |
| gphi_iterator psi; |
| |
| if (is_gimple_assign (ref->stmt)) |
| { |
| if (DR_IS_READ (ref->ref)) |
| name = gimple_assign_lhs (ref->stmt); |
| else |
| name = gimple_assign_rhs1 (ref->stmt); |
| } |
| else |
| name = PHI_RESULT (ref->stmt); |
| if (!name) |
| return NULL; |
| |
| for (psi = gsi_start_phis (loop->header); !gsi_end_p (psi); gsi_next (&psi)) |
| { |
| phi = psi.phi (); |
| if (PHI_ARG_DEF_FROM_EDGE (phi, latch) == name) |
| break; |
| } |
| |
| if (gsi_end_p (psi)) |
| return NULL; |
| |
| init = PHI_ARG_DEF_FROM_EDGE (phi, loop_preheader_edge (loop)); |
| if (TREE_CODE (init) != SSA_NAME) |
| return NULL; |
| init_stmt = SSA_NAME_DEF_STMT (init); |
| if (gimple_code (init_stmt) != GIMPLE_ASSIGN) |
| return NULL; |
| gcc_assert (gimple_assign_lhs (init_stmt) == init); |
| |
| init_ref = gimple_assign_rhs1 (init_stmt); |
| if (!REFERENCE_CLASS_P (init_ref) |
| && !DECL_P (init_ref)) |
| return NULL; |
| |
| /* Analyze the behavior of INIT_REF with respect to LOOP (innermost |
| loop enclosing PHI). */ |
| memset (&init_dr, 0, sizeof (struct data_reference)); |
| DR_REF (&init_dr) = init_ref; |
| DR_STMT (&init_dr) = phi; |
| if (!dr_analyze_innermost (&init_dr, loop)) |
| return NULL; |
| |
| if (!valid_initializer_p (&init_dr, ref->distance + 1, root->ref)) |
| return NULL; |
| |
| return phi; |
| } |
| |
| /* Adds a reference for the looparound copy of REF in PHI to CHAIN. */ |
| |
| static void |
| insert_looparound_copy (chain_p chain, dref ref, gphi *phi) |
| { |
| dref nw = XCNEW (struct dref_d), aref; |
| unsigned i; |
| |
| nw->stmt = phi; |
| nw->distance = ref->distance + 1; |
| nw->always_accessed = 1; |
| |
| FOR_EACH_VEC_ELT (chain->refs, i, aref) |
| if (aref->distance >= nw->distance) |
| break; |
| chain->refs.safe_insert (i, nw); |
| |
| if (nw->distance > chain->length) |
| { |
| chain->length = nw->distance; |
| chain->has_max_use_after = false; |
| } |
| } |
| |
| /* For references in CHAIN that are copied around the LOOP (created previously |
| by PRE, or by user), add the results of such copies to the chain. This |
| enables us to remove the copies by unrolling, and may need less registers |
| (also, it may allow us to combine chains together). */ |
| |
| static void |
| add_looparound_copies (struct loop *loop, chain_p chain) |
| { |
| unsigned i; |
| dref ref, root = get_chain_root (chain); |
| gphi *phi; |
| |
| FOR_EACH_VEC_ELT (chain->refs, i, ref) |
| { |
| phi = find_looparound_phi (loop, ref, root); |
| if (!phi) |
| continue; |
| |
| bitmap_set_bit (looparound_phis, SSA_NAME_VERSION (PHI_RESULT (phi))); |
| insert_looparound_copy (chain, ref, phi); |
| } |
| } |
| |
| /* Find roots of the values and determine distances in the component COMP. |
| The references are redistributed into CHAINS. LOOP is the current |
| loop. */ |
| |
| static void |
| determine_roots_comp (struct loop *loop, |
| struct component *comp, |
| vec<chain_p> *chains) |
| { |
| unsigned i; |
| dref a; |
| chain_p chain = NULL; |
| widest_int last_ofs = 0; |
| |
| /* Invariants are handled specially. */ |
| if (comp->comp_step == RS_INVARIANT) |
| { |
| chain = make_invariant_chain (comp); |
| chains->safe_push (chain); |
| return; |
| } |
| |
| comp->refs.qsort (order_drefs); |
| |
| FOR_EACH_VEC_ELT (comp->refs, i, a) |
| { |
| if (!chain || DR_IS_WRITE (a->ref) |
| || wi::leu_p (MAX_DISTANCE, a->offset - last_ofs)) |
| { |
| if (nontrivial_chain_p (chain)) |
| { |
| add_looparound_copies (loop, chain); |
| chains->safe_push (chain); |
| } |
| else |
| release_chain (chain); |
| chain = make_rooted_chain (a); |
| last_ofs = a->offset; |
| continue; |
| } |
| |
| add_ref_to_chain (chain, a); |
| } |
| |
| if (nontrivial_chain_p (chain)) |
| { |
| add_looparound_copies (loop, chain); |
| chains->safe_push (chain); |
| } |
| else |
| release_chain (chain); |
| } |
| |
| /* Find roots of the values and determine distances in components COMPS, and |
| separates the references to CHAINS. LOOP is the current loop. */ |
| |
| static void |
| determine_roots (struct loop *loop, |
| struct component *comps, vec<chain_p> *chains) |
| { |
| struct component *comp; |
| |
| for (comp = comps; comp; comp = comp->next) |
| determine_roots_comp (loop, comp, chains); |
| } |
| |
| /* Replace the reference in statement STMT with temporary variable |
| NEW_TREE. If SET is true, NEW_TREE is instead initialized to the value of |
| the reference in the statement. IN_LHS is true if the reference |
| is in the lhs of STMT, false if it is in rhs. */ |
| |
| static void |
| replace_ref_with (gimple stmt, tree new_tree, bool set, bool in_lhs) |
| { |
| tree val; |
| gassign *new_stmt; |
| gimple_stmt_iterator bsi, psi; |
| |
| if (gimple_code (stmt) == GIMPLE_PHI) |
| { |
| gcc_assert (!in_lhs && !set); |
| |
| val = PHI_RESULT (stmt); |
| bsi = gsi_after_labels (gimple_bb (stmt)); |
| psi = gsi_for_stmt (stmt); |
| remove_phi_node (&psi, false); |
| |
| /* Turn the phi node into GIMPLE_ASSIGN. */ |
| new_stmt = gimple_build_assign (val, new_tree); |
| gsi_insert_before (&bsi, new_stmt, GSI_NEW_STMT); |
| return; |
| } |
| |
| /* Since the reference is of gimple_reg type, it should only |
| appear as lhs or rhs of modify statement. */ |
| gcc_assert (is_gimple_assign (stmt)); |
| |
| bsi = gsi_for_stmt (stmt); |
| |
| /* If we do not need to initialize NEW_TREE, just replace the use of OLD. */ |
| if (!set) |
| { |
| gcc_assert (!in_lhs); |
| gimple_assign_set_rhs_from_tree (&bsi, new_tree); |
| stmt = gsi_stmt (bsi); |
| update_stmt (stmt); |
| return; |
| } |
| |
| if (in_lhs) |
| { |
| /* We have statement |
| |
| OLD = VAL |
| |
| If OLD is a memory reference, then VAL is gimple_val, and we transform |
| this to |
| |
| OLD = VAL |
| NEW = VAL |
| |
| Otherwise, we are replacing a combination chain, |
| VAL is the expression that performs the combination, and OLD is an |
| SSA name. In this case, we transform the assignment to |
| |
| OLD = VAL |
| NEW = OLD |
| |
| */ |
| |
| val = gimple_assign_lhs (stmt); |
| if (TREE_CODE (val) != SSA_NAME) |
| { |
| val = gimple_assign_rhs1 (stmt); |
| gcc_assert (gimple_assign_single_p (stmt)); |
| if (TREE_CLOBBER_P (val)) |
| val = get_or_create_ssa_default_def (cfun, SSA_NAME_VAR (new_tree)); |
| else |
| gcc_assert (gimple_assign_copy_p (stmt)); |
| } |
| } |
| else |
| { |
| /* VAL = OLD |
| |
| is transformed to |
| |
| VAL = OLD |
| NEW = VAL */ |
| |
| val = gimple_assign_lhs (stmt); |
| } |
| |
| new_stmt = gimple_build_assign (new_tree, unshare_expr (val)); |
| gsi_insert_after (&bsi, new_stmt, GSI_NEW_STMT); |
| } |
| |
| /* Returns a memory reference to DR in the ITER-th iteration of |
| the loop it was analyzed in. Append init stmts to STMTS. */ |
| |
| static tree |
| ref_at_iteration (data_reference_p dr, int iter, gimple_seq *stmts) |
| { |
| tree off = DR_OFFSET (dr); |
| tree coff = DR_INIT (dr); |
| if (iter == 0) |
| ; |
| else if (TREE_CODE (DR_STEP (dr)) == INTEGER_CST) |
| coff = size_binop (PLUS_EXPR, coff, |
| size_binop (MULT_EXPR, DR_STEP (dr), ssize_int (iter))); |
| else |
| off = size_binop (PLUS_EXPR, off, |
| size_binop (MULT_EXPR, DR_STEP (dr), ssize_int (iter))); |
| tree addr = fold_build_pointer_plus (DR_BASE_ADDRESS (dr), off); |
| addr = force_gimple_operand_1 (unshare_expr (addr), stmts, |
| is_gimple_mem_ref_addr, NULL_TREE); |
| tree alias_ptr = fold_convert (reference_alias_ptr_type (DR_REF (dr)), coff); |
| tree type = build_aligned_type (TREE_TYPE (DR_REF (dr)), |
| get_object_alignment (DR_REF (dr))); |
| /* While data-ref analysis punts on bit offsets it still handles |
| bitfield accesses at byte boundaries. Cope with that. Note that |
| we cannot simply re-apply the outer COMPONENT_REF because the |
| byte-granular portion of it is already applied via DR_INIT and |
| DR_OFFSET, so simply build a BIT_FIELD_REF knowing that the bits |
| start at offset zero. */ |
| if (TREE_CODE (DR_REF (dr)) == COMPONENT_REF |
| && DECL_BIT_FIELD (TREE_OPERAND (DR_REF (dr), 1))) |
| { |
| tree field = TREE_OPERAND (DR_REF (dr), 1); |
| return build3 (BIT_FIELD_REF, TREE_TYPE (DR_REF (dr)), |
| build2 (MEM_REF, type, addr, alias_ptr), |
| DECL_SIZE (field), bitsize_zero_node); |
| } |
| else |
| return fold_build2 (MEM_REF, type, addr, alias_ptr); |
| } |
| |
| /* Get the initialization expression for the INDEX-th temporary variable |
| of CHAIN. */ |
| |
| static tree |
| get_init_expr (chain_p chain, unsigned index) |
| { |
| if (chain->type == CT_COMBINATION) |
| { |
| tree e1 = get_init_expr (chain->ch1, index); |
| tree e2 = get_init_expr (chain->ch2, index); |
| |
| return fold_build2 (chain->op, chain->rslt_type, e1, e2); |
| } |
| else |
| return chain->inits[index]; |
| } |
| |
| /* Returns a new temporary variable used for the I-th variable carrying |
| value of REF. The variable's uid is marked in TMP_VARS. */ |
| |
| static tree |
| predcom_tmp_var (tree ref, unsigned i, bitmap tmp_vars) |
| { |
| tree type = TREE_TYPE (ref); |
| /* We never access the components of the temporary variable in predictive |
| commoning. */ |
| tree var = create_tmp_reg (type, get_lsm_tmp_name (ref, i)); |
| bitmap_set_bit (tmp_vars, DECL_UID (var)); |
| return var; |
| } |
| |
| /* Creates the variables for CHAIN, as well as phi nodes for them and |
| initialization on entry to LOOP. Uids of the newly created |
| temporary variables are marked in TMP_VARS. */ |
| |
| static void |
| initialize_root_vars (struct loop *loop, chain_p chain, bitmap tmp_vars) |
| { |
| unsigned i; |
| unsigned n = chain->length; |
| dref root = get_chain_root (chain); |
| bool reuse_first = !chain->has_max_use_after; |
| tree ref, init, var, next; |
| gphi *phi; |
| gimple_seq stmts; |
| edge entry = loop_preheader_edge (loop), latch = loop_latch_edge (loop); |
| |
| /* If N == 0, then all the references are within the single iteration. And |
| since this is an nonempty chain, reuse_first cannot be true. */ |
| gcc_assert (n > 0 || !reuse_first); |
| |
| chain->vars.create (n + 1); |
| |
| if (chain->type == CT_COMBINATION) |
| ref = gimple_assign_lhs (root->stmt); |
| else |
| ref = DR_REF (root->ref); |
| |
| for (i = 0; i < n + (reuse_first ? 0 : 1); i++) |
| { |
| var = predcom_tmp_var (ref, i, tmp_vars); |
| chain->vars.quick_push (var); |
| } |
| if (reuse_first) |
| chain->vars.quick_push (chain->vars[0]); |
| |
| FOR_EACH_VEC_ELT (chain->vars, i, var) |
| chain->vars[i] = make_ssa_name (var); |
| |
| for (i = 0; i < n; i++) |
| { |
| var = chain->vars[i]; |
| next = chain->vars[i + 1]; |
| init = get_init_expr (chain, i); |
| |
| init = force_gimple_operand (init, &stmts, true, NULL_TREE); |
| if (stmts) |
| gsi_insert_seq_on_edge_immediate (entry, stmts); |
| |
| phi = create_phi_node (var, loop->header); |
| add_phi_arg (phi, init, entry, UNKNOWN_LOCATION); |
| add_phi_arg (phi, next, latch, UNKNOWN_LOCATION); |
| } |
| } |
| |
| /* Create the variables and initialization statement for root of chain |
| CHAIN. Uids of the newly created temporary variables are marked |
| in TMP_VARS. */ |
| |
| static void |
| initialize_root (struct loop *loop, chain_p chain, bitmap tmp_vars) |
| { |
| dref root = get_chain_root (chain); |
| bool in_lhs = (chain->type == CT_STORE_LOAD |
| || chain->type == CT_COMBINATION); |
| |
| initialize_root_vars (loop, chain, tmp_vars); |
| replace_ref_with (root->stmt, |
| chain->vars[chain->length], |
| true, in_lhs); |
| } |
| |
| /* Initializes a variable for load motion for ROOT and prepares phi nodes and |
| initialization on entry to LOOP if necessary. The ssa name for the variable |
| is stored in VARS. If WRITTEN is true, also a phi node to copy its value |
| around the loop is created. Uid of the newly created temporary variable |
| is marked in TMP_VARS. INITS is the list containing the (single) |
| initializer. */ |
| |
| static void |
| initialize_root_vars_lm (struct loop *loop, dref root, bool written, |
| vec<tree> *vars, vec<tree> inits, |
| bitmap tmp_vars) |
| { |
| unsigned i; |
| tree ref = DR_REF (root->ref), init, var, next; |
| gimple_seq stmts; |
| gphi *phi; |
| edge entry = loop_preheader_edge (loop), latch = loop_latch_edge (loop); |
| |
| /* Find the initializer for the variable, and check that it cannot |
| trap. */ |
| init = inits[0]; |
| |
| vars->create (written ? 2 : 1); |
| var = predcom_tmp_var (ref, 0, tmp_vars); |
| vars->quick_push (var); |
| if (written) |
| vars->quick_push ((*vars)[0]); |
| |
| FOR_EACH_VEC_ELT (*vars, i, var) |
| (*vars)[i] = make_ssa_name (var); |
| |
| var = (*vars)[0]; |
| |
| init = force_gimple_operand (init, &stmts, written, NULL_TREE); |
| if (stmts) |
| gsi_insert_seq_on_edge_immediate (entry, stmts); |
| |
| if (written) |
| { |
| next = (*vars)[1]; |
| phi = create_phi_node (var, loop->header); |
| add_phi_arg (phi, init, entry, UNKNOWN_LOCATION); |
| add_phi_arg (phi, next, latch, UNKNOWN_LOCATION); |
| } |
| else |
| { |
| gassign *init_stmt = gimple_build_assign (var, init); |
| gsi_insert_on_edge_immediate (entry, init_stmt); |
| } |
| } |
| |
| |
| /* Execute load motion for references in chain CHAIN. Uids of the newly |
| created temporary variables are marked in TMP_VARS. */ |
| |
| static void |
| execute_load_motion (struct loop *loop, chain_p chain, bitmap tmp_vars) |
| { |
| auto_vec<tree> vars; |
| dref a; |
| unsigned n_writes = 0, ridx, i; |
| tree var; |
| |
| gcc_assert (chain->type == CT_INVARIANT); |
| gcc_assert (!chain->combined); |
| FOR_EACH_VEC_ELT (chain->refs, i, a) |
| if (DR_IS_WRITE (a->ref)) |
| n_writes++; |
| |
| /* If there are no reads in the loop, there is nothing to do. */ |
| if (n_writes == chain->refs.length ()) |
| return; |
| |
| initialize_root_vars_lm (loop, get_chain_root (chain), n_writes > 0, |
| &vars, chain->inits, tmp_vars); |
| |
| ridx = 0; |
| FOR_EACH_VEC_ELT (chain->refs, i, a) |
| { |
| bool is_read = DR_IS_READ (a->ref); |
| |
| if (DR_IS_WRITE (a->ref)) |
| { |
| n_writes--; |
| if (n_writes) |
| { |
| var = vars[0]; |
| var = make_ssa_name (SSA_NAME_VAR (var)); |
| vars[0] = var; |
| } |
| else |
| ridx = 1; |
| } |
| |
| replace_ref_with (a->stmt, vars[ridx], |
| !is_read, !is_read); |
| } |
| } |
| |
| /* Returns the single statement in that NAME is used, excepting |
| the looparound phi nodes contained in one of the chains. If there is no |
| such statement, or more statements, NULL is returned. */ |
| |
| static gimple |
| single_nonlooparound_use (tree name) |
| { |
| use_operand_p use; |
| imm_use_iterator it; |
| gimple stmt, ret = NULL; |
| |
| FOR_EACH_IMM_USE_FAST (use, it, name) |
| { |
| stmt = USE_STMT (use); |
| |
| if (gimple_code (stmt) == GIMPLE_PHI) |
| { |
| /* Ignore uses in looparound phi nodes. Uses in other phi nodes |
| could not be processed anyway, so just fail for them. */ |
| if (bitmap_bit_p (looparound_phis, |
| SSA_NAME_VERSION (PHI_RESULT (stmt)))) |
| continue; |
| |
| return NULL; |
| } |
| else if (is_gimple_debug (stmt)) |
| continue; |
| else if (ret != NULL) |
| return NULL; |
| else |
| ret = stmt; |
| } |
| |
| return ret; |
| } |
| |
| /* Remove statement STMT, as well as the chain of assignments in that it is |
| used. */ |
| |
| static void |
| remove_stmt (gimple stmt) |
| { |
| tree name; |
| gimple next; |
| gimple_stmt_iterator psi; |
| |
| if (gimple_code (stmt) == GIMPLE_PHI) |
| { |
| name = PHI_RESULT (stmt); |
| next = single_nonlooparound_use (name); |
| reset_debug_uses (stmt); |
| psi = gsi_for_stmt (stmt); |
| remove_phi_node (&psi, true); |
| |
| if (!next |
| || !gimple_assign_ssa_name_copy_p (next) |
| || gimple_assign_rhs1 (next) != name) |
| return; |
| |
| stmt = next; |
| } |
| |
| while (1) |
| { |
| gimple_stmt_iterator bsi; |
| |
| bsi = gsi_for_stmt (stmt); |
| |
| name = gimple_assign_lhs (stmt); |
| gcc_assert (TREE_CODE (name) == SSA_NAME); |
| |
| next = single_nonlooparound_use (name); |
| reset_debug_uses (stmt); |
| |
| unlink_stmt_vdef (stmt); |
| gsi_remove (&bsi, true); |
| release_defs (stmt); |
| |
| if (!next |
| || !gimple_assign_ssa_name_copy_p (next) |
| || gimple_assign_rhs1 (next) != name) |
| return; |
| |
| stmt = next; |
| } |
| } |
| |
| /* Perform the predictive commoning optimization for a chain CHAIN. |
| Uids of the newly created temporary variables are marked in TMP_VARS.*/ |
| |
| static void |
| execute_pred_commoning_chain (struct loop *loop, chain_p chain, |
| bitmap tmp_vars) |
| { |
| unsigned i; |
| dref a; |
| tree var; |
| |
| if (chain->combined) |
| { |
| /* For combined chains, just remove the statements that are used to |
| compute the values of the expression (except for the root one). |
| We delay this until after all chains are processed. */ |
| } |
| else |
| { |
| /* For non-combined chains, set up the variables that hold its value, |
| and replace the uses of the original references by these |
| variables. */ |
| initialize_root (loop, chain, tmp_vars); |
| for (i = 1; chain->refs.iterate (i, &a); i++) |
| { |
| var = chain->vars[chain->length - a->distance]; |
| replace_ref_with (a->stmt, var, false, false); |
| } |
| } |
| } |
| |
| /* Determines the unroll factor necessary to remove as many temporary variable |
| copies as possible. CHAINS is the list of chains that will be |
| optimized. */ |
| |
| static unsigned |
| determine_unroll_factor (vec<chain_p> chains) |
| { |
| chain_p chain; |
| unsigned factor = 1, af, nfactor, i; |
| unsigned max = PARAM_VALUE (PARAM_MAX_UNROLL_TIMES); |
| |
| FOR_EACH_VEC_ELT (chains, i, chain) |
| { |
| if (chain->type == CT_INVARIANT) |
| continue; |
| |
| if (chain->combined) |
| { |
| /* For combined chains, we can't handle unrolling if we replace |
| looparound PHIs. */ |
| dref a; |
| unsigned j; |
| for (j = 1; chain->refs.iterate (j, &a); j++) |
| if (gimple_code (a->stmt) == GIMPLE_PHI) |
| return 1; |
| continue; |
| } |
| |
| /* The best unroll factor for this chain is equal to the number of |
| temporary variables that we create for it. */ |
| af = chain->length; |
| if (chain->has_max_use_after) |
| af++; |
| |
| nfactor = factor * af / gcd (factor, af); |
| if (nfactor <= max) |
| factor = nfactor; |
| } |
| |
| return factor; |
| } |
| |
| /* Perform the predictive commoning optimization for CHAINS. |
| Uids of the newly created temporary variables are marked in TMP_VARS. */ |
| |
| static void |
| execute_pred_commoning (struct loop *loop, vec<chain_p> chains, |
| bitmap tmp_vars) |
| { |
| chain_p chain; |
| unsigned i; |
| |
| FOR_EACH_VEC_ELT (chains, i, chain) |
| { |
| if (chain->type == CT_INVARIANT) |
| execute_load_motion (loop, chain, tmp_vars); |
| else |
| execute_pred_commoning_chain (loop, chain, tmp_vars); |
| } |
| |
| FOR_EACH_VEC_ELT (chains, i, chain) |
| { |
| if (chain->type == CT_INVARIANT) |
| ; |
| else if (chain->combined) |
| { |
| /* For combined chains, just remove the statements that are used to |
| compute the values of the expression (except for the root one). */ |
| dref a; |
| unsigned j; |
| for (j = 1; chain->refs.iterate (j, &a); j++) |
| remove_stmt (a->stmt); |
| } |
| } |
| |
| update_ssa (TODO_update_ssa_only_virtuals); |
| } |
| |
| /* For each reference in CHAINS, if its defining statement is |
| phi node, record the ssa name that is defined by it. */ |
| |
| static void |
| replace_phis_by_defined_names (vec<chain_p> chains) |
| { |
| chain_p chain; |
| dref a; |
| unsigned i, j; |
| |
| FOR_EACH_VEC_ELT (chains, i, chain) |
| FOR_EACH_VEC_ELT (chain->refs, j, a) |
| { |
| if (gimple_code (a->stmt) == GIMPLE_PHI) |
| { |
| a->name_defined_by_phi = PHI_RESULT (a->stmt); |
| a->stmt = NULL; |
| } |
| } |
| } |
| |
| /* For each reference in CHAINS, if name_defined_by_phi is not |
| NULL, use it to set the stmt field. */ |
| |
| static void |
| replace_names_by_phis (vec<chain_p> chains) |
| { |
| chain_p chain; |
| dref a; |
| unsigned i, j; |
| |
| FOR_EACH_VEC_ELT (chains, i, chain) |
| FOR_EACH_VEC_ELT (chain->refs, j, a) |
| if (a->stmt == NULL) |
| { |
| a->stmt = SSA_NAME_DEF_STMT (a->name_defined_by_phi); |
| gcc_assert (gimple_code (a->stmt) == GIMPLE_PHI); |
| a->name_defined_by_phi = NULL_TREE; |
| } |
| } |
| |
| /* Wrapper over execute_pred_commoning, to pass it as a callback |
| to tree_transform_and_unroll_loop. */ |
| |
| struct epcc_data |
| { |
| vec<chain_p> chains; |
| bitmap tmp_vars; |
| }; |
| |
| static void |
| execute_pred_commoning_cbck (struct loop *loop, void *data) |
| { |
| struct epcc_data *const dta = (struct epcc_data *) data; |
| |
| /* Restore phi nodes that were replaced by ssa names before |
| tree_transform_and_unroll_loop (see detailed description in |
| tree_predictive_commoning_loop). */ |
| replace_names_by_phis (dta->chains); |
| execute_pred_commoning (loop, dta->chains, dta->tmp_vars); |
| } |
| |
| /* Base NAME and all the names in the chain of phi nodes that use it |
| on variable VAR. The phi nodes are recognized by being in the copies of |
| the header of the LOOP. */ |
| |
| static void |
| base_names_in_chain_on (struct loop *loop, tree name, tree var) |
| { |
| gimple stmt, phi; |
| imm_use_iterator iter; |
| |
| replace_ssa_name_symbol (name, var); |
| |
| while (1) |
| { |
| phi = NULL; |
| FOR_EACH_IMM_USE_STMT (stmt, iter, name) |
| { |
| if (gimple_code (stmt) == GIMPLE_PHI |
| && flow_bb_inside_loop_p (loop, gimple_bb (stmt))) |
| { |
| phi = stmt; |
| BREAK_FROM_IMM_USE_STMT (iter); |
| } |
| } |
| if (!phi) |
| return; |
| |
| name = PHI_RESULT (phi); |
| replace_ssa_name_symbol (name, var); |
| } |
| } |
| |
| /* Given an unrolled LOOP after predictive commoning, remove the |
| register copies arising from phi nodes by changing the base |
| variables of SSA names. TMP_VARS is the set of the temporary variables |
| for those we want to perform this. */ |
| |
| static void |
| eliminate_temp_copies (struct loop *loop, bitmap tmp_vars) |
| { |
| edge e; |
| gphi *phi; |
| gimple stmt; |
| tree name, use, var; |
| gphi_iterator psi; |
| |
| e = loop_latch_edge (loop); |
| for (psi = gsi_start_phis (loop->header); !gsi_end_p (psi); gsi_next (&psi)) |
| { |
| phi = psi.phi (); |
| name = PHI_RESULT (phi); |
| var = SSA_NAME_VAR (name); |
| if (!var || !bitmap_bit_p (tmp_vars, DECL_UID (var))) |
| continue; |
| use = PHI_ARG_DEF_FROM_EDGE (phi, e); |
| gcc_assert (TREE_CODE (use) == SSA_NAME); |
| |
| /* Base all the ssa names in the ud and du chain of NAME on VAR. */ |
| stmt = SSA_NAME_DEF_STMT (use); |
| while (gimple_code (stmt) == GIMPLE_PHI |
| /* In case we could not unroll the loop enough to eliminate |
| all copies, we may reach the loop header before the defining |
| statement (in that case, some register copies will be present |
| in loop latch in the final code, corresponding to the newly |
| created looparound phi nodes). */ |
| && gimple_bb (stmt) != loop->header) |
| { |
| gcc_assert (single_pred_p (gimple_bb (stmt))); |
| use = PHI_ARG_DEF (stmt, 0); |
| stmt = SSA_NAME_DEF_STMT (use); |
| } |
| |
| base_names_in_chain_on (loop, use, var); |
| } |
| } |
| |
| /* Returns true if CHAIN is suitable to be combined. */ |
| |
| static bool |
| chain_can_be_combined_p (chain_p chain) |
| { |
| return (!chain->combined |
| && (chain->type == CT_LOAD || chain->type == CT_COMBINATION)); |
| } |
| |
| /* Returns the modify statement that uses NAME. Skips over assignment |
| statements, NAME is replaced with the actual name used in the returned |
| statement. */ |
| |
| static gimple |
| find_use_stmt (tree *name) |
| { |
| gimple stmt; |
| tree rhs, lhs; |
| |
| /* Skip over assignments. */ |
| while (1) |
| { |
| stmt = single_nonlooparound_use (*name); |
| if (!stmt) |
| return NULL; |
| |
| if (gimple_code (stmt) != GIMPLE_ASSIGN) |
| return NULL; |
| |
| lhs = gimple_assign_lhs (stmt); |
| if (TREE_CODE (lhs) != SSA_NAME) |
| return NULL; |
| |
| if (gimple_assign_copy_p (stmt)) |
| { |
| rhs = gimple_assign_rhs1 (stmt); |
| if (rhs != *name) |
| return NULL; |
| |
| *name = lhs; |
| } |
| else if (get_gimple_rhs_class (gimple_assign_rhs_code (stmt)) |
| == GIMPLE_BINARY_RHS) |
| return stmt; |
| else |
| return NULL; |
| } |
| } |
| |
| /* Returns true if we may perform reassociation for operation CODE in TYPE. */ |
| |
| static bool |
| may_reassociate_p (tree type, enum tree_code code) |
| { |
| if (FLOAT_TYPE_P (type) |
| && !flag_unsafe_math_optimizations) |
| return false; |
| |
| return (commutative_tree_code (code) |
| && associative_tree_code (code)); |
| } |
| |
| /* If the operation used in STMT is associative and commutative, go through the |
| tree of the same operations and returns its root. Distance to the root |
| is stored in DISTANCE. */ |
| |
| static gimple |
| find_associative_operation_root (gimple stmt, unsigned *distance) |
| { |
| tree lhs; |
| gimple next; |
| enum tree_code code = gimple_assign_rhs_code (stmt); |
| tree type = TREE_TYPE (gimple_assign_lhs (stmt)); |
| unsigned dist = 0; |
| |
| if (!may_reassociate_p (type, code)) |
| return NULL; |
| |
| while (1) |
| { |
| lhs = gimple_assign_lhs (stmt); |
| gcc_assert (TREE_CODE (lhs) == SSA_NAME); |
| |
| next = find_use_stmt (&lhs); |
| if (!next |
| || gimple_assign_rhs_code (next) != code) |
| break; |
| |
| stmt = next; |
| dist++; |
| } |
| |
| if (distance) |
| *distance = dist; |
| return stmt; |
| } |
| |
| /* Returns the common statement in that NAME1 and NAME2 have a use. If there |
| is no such statement, returns NULL_TREE. In case the operation used on |
| NAME1 and NAME2 is associative and commutative, returns the root of the |
| tree formed by this operation instead of the statement that uses NAME1 or |
| NAME2. */ |
| |
| static gimple |
| find_common_use_stmt (tree *name1, tree *name2) |
| { |
| gimple stmt1, stmt2; |
| |
| stmt1 = find_use_stmt (name1); |
| if (!stmt1) |
| return NULL; |
| |
| stmt2 = find_use_stmt (name2); |
| if (!stmt2) |
| return NULL; |
| |
| if (stmt1 == stmt2) |
| return stmt1; |
| |
| stmt1 = find_associative_operation_root (stmt1, NULL); |
| if (!stmt1) |
| return NULL; |
| stmt2 = find_associative_operation_root (stmt2, NULL); |
| if (!stmt2) |
| return NULL; |
| |
| return (stmt1 == stmt2 ? stmt1 : NULL); |
| } |
| |
| /* Checks whether R1 and R2 are combined together using CODE, with the result |
| in RSLT_TYPE, in order R1 CODE R2 if SWAP is false and in order R2 CODE R1 |
| if it is true. If CODE is ERROR_MARK, set these values instead. */ |
| |
| static bool |
| combinable_refs_p (dref r1, dref r2, |
| enum tree_code *code, bool *swap, tree *rslt_type) |
| { |
| enum tree_code acode; |
| bool aswap; |
| tree atype; |
| tree name1, name2; |
| gimple stmt; |
| |
| name1 = name_for_ref (r1); |
| name2 = name_for_ref (r2); |
| gcc_assert (name1 != NULL_TREE && name2 != NULL_TREE); |
| |
| stmt = find_common_use_stmt (&name1, &name2); |
| |
| if (!stmt |
| /* A simple post-dominance check - make sure the combination |
| is executed under the same condition as the references. */ |
| || (gimple_bb (stmt) != gimple_bb (r1->stmt) |
| && gimple_bb (stmt) != gimple_bb (r2->stmt))) |
| return false; |
| |
| acode = gimple_assign_rhs_code (stmt); |
| aswap = (!commutative_tree_code (acode) |
| && gimple_assign_rhs1 (stmt) != name1); |
| atype = TREE_TYPE (gimple_assign_lhs (stmt)); |
| |
| if (*code == ERROR_MARK) |
| { |
| *code = acode; |
| *swap = aswap; |
| *rslt_type = atype; |
| return true; |
| } |
| |
| return (*code == acode |
| && *swap == aswap |
| && *rslt_type == atype); |
| } |
| |
| /* Remove OP from the operation on rhs of STMT, and replace STMT with |
| an assignment of the remaining operand. */ |
| |
| static void |
| remove_name_from_operation (gimple stmt, tree op) |
| { |
| tree other_op; |
| gimple_stmt_iterator si; |
| |
| gcc_assert (is_gimple_assign (stmt)); |
| |
| if (gimple_assign_rhs1 (stmt) == op) |
| other_op = gimple_assign_rhs2 (stmt); |
| else |
| other_op = gimple_assign_rhs1 (stmt); |
| |
| si = gsi_for_stmt (stmt); |
| gimple_assign_set_rhs_from_tree (&si, other_op); |
| |
| /* We should not have reallocated STMT. */ |
| gcc_assert (gsi_stmt (si) == stmt); |
| |
| update_stmt (stmt); |
| } |
| |
| /* Reassociates the expression in that NAME1 and NAME2 are used so that they |
| are combined in a single statement, and returns this statement. */ |
| |
| static gimple |
| reassociate_to_the_same_stmt (tree name1, tree name2) |
| { |
| gimple stmt1, stmt2, root1, root2, s1, s2; |
| gassign *new_stmt, *tmp_stmt; |
| tree new_name, tmp_name, var, r1, r2; |
| unsigned dist1, dist2; |
| enum tree_code code; |
| tree type = TREE_TYPE (name1); |
| gimple_stmt_iterator bsi; |
| |
| stmt1 = find_use_stmt (&name1); |
| stmt2 = find_use_stmt (&name2); |
| root1 = find_associative_operation_root (stmt1, &dist1); |
| root2 = find_associative_operation_root (stmt2, &dist2); |
| code = gimple_assign_rhs_code (stmt1); |
| |
| gcc_assert (root1 && root2 && root1 == root2 |
| && code == gimple_assign_rhs_code (stmt2)); |
| |
| /* Find the root of the nearest expression in that both NAME1 and NAME2 |
| are used. */ |
| r1 = name1; |
| s1 = stmt1; |
| r2 = name2; |
| s2 = stmt2; |
| |
| while (dist1 > dist2) |
| { |
| s1 = find_use_stmt (&r1); |
| r1 = gimple_assign_lhs (s1); |
| dist1--; |
| } |
| while (dist2 > dist1) |
| { |
| s2 = find_use_stmt (&r2); |
| r2 = gimple_assign_lhs (s2); |
| dist2--; |
| } |
| |
| while (s1 != s2) |
| { |
| s1 = find_use_stmt (&r1); |
| r1 = gimple_assign_lhs (s1); |
| s2 = find_use_stmt (&r2); |
| r2 = gimple_assign_lhs (s2); |
| } |
| |
| /* Remove NAME1 and NAME2 from the statements in that they are used |
| currently. */ |
| remove_name_from_operation (stmt1, name1); |
| remove_name_from_operation (stmt2, name2); |
| |
| /* Insert the new statement combining NAME1 and NAME2 before S1, and |
| combine it with the rhs of S1. */ |
| var = create_tmp_reg (type, "predreastmp"); |
| new_name = make_ssa_name (var); |
| new_stmt = gimple_build_assign (new_name, code, name1, name2); |
| |
| var = create_tmp_reg (type, "predreastmp"); |
| tmp_name = make_ssa_name (var); |
| |
| /* Rhs of S1 may now be either a binary expression with operation |
| CODE, or gimple_val (in case that stmt1 == s1 or stmt2 == s1, |
| so that name1 or name2 was removed from it). */ |
| tmp_stmt = gimple_build_assign (tmp_name, gimple_assign_rhs_code (s1), |
| gimple_assign_rhs1 (s1), |
| gimple_assign_rhs2 (s1)); |
| |
| bsi = gsi_for_stmt (s1); |
| gimple_assign_set_rhs_with_ops (&bsi, code, new_name, tmp_name); |
| s1 = gsi_stmt (bsi); |
| update_stmt (s1); |
| |
| gsi_insert_before (&bsi, new_stmt, GSI_SAME_STMT); |
| gsi_insert_before (&bsi, tmp_stmt, GSI_SAME_STMT); |
| |
| return new_stmt; |
| } |
| |
| /* Returns the statement that combines references R1 and R2. In case R1 |
| and R2 are not used in the same statement, but they are used with an |
| associative and commutative operation in the same expression, reassociate |
| the expression so that they are used in the same statement. */ |
| |
| static gimple |
| stmt_combining_refs (dref r1, dref r2) |
| { |
| gimple stmt1, stmt2; |
| tree name1 = name_for_ref (r1); |
| tree name2 = name_for_ref (r2); |
| |
| stmt1 = find_use_stmt (&name1); |
| stmt2 = find_use_stmt (&name2); |
| if (stmt1 == stmt2) |
| return stmt1; |
| |
| return reassociate_to_the_same_stmt (name1, name2); |
| } |
| |
| /* Tries to combine chains CH1 and CH2 together. If this succeeds, the |
| description of the new chain is returned, otherwise we return NULL. */ |
| |
| static chain_p |
| combine_chains (chain_p ch1, chain_p ch2) |
| { |
| dref r1, r2, nw; |
| enum tree_code op = ERROR_MARK; |
| bool swap = false; |
| chain_p new_chain; |
| unsigned i; |
| gimple root_stmt; |
| tree rslt_type = NULL_TREE; |
| |
| if (ch1 == ch2) |
| return NULL; |
| if (ch1->length != ch2->length) |
| return NULL; |
| |
| if (ch1->refs.length () != ch2->refs.length ()) |
| return NULL; |
| |
| for (i = 0; (ch1->refs.iterate (i, &r1) |
| && ch2->refs.iterate (i, &r2)); i++) |
| { |
| if (r1->distance != r2->distance) |
| return NULL; |
| |
| if (!combinable_refs_p (r1, r2, &op, &swap, &rslt_type)) |
| return NULL; |
| } |
| |
| if (swap) |
| { |
| chain_p tmp = ch1; |
| ch1 = ch2; |
| ch2 = tmp; |
| } |
| |
| new_chain = XCNEW (struct chain); |
| new_chain->type = CT_COMBINATION; |
| new_chain->op = op; |
| new_chain->ch1 = ch1; |
| new_chain->ch2 = ch2; |
| new_chain->rslt_type = rslt_type; |
| new_chain->length = ch1->length; |
| |
| for (i = 0; (ch1->refs.iterate (i, &r1) |
| && ch2->refs.iterate (i, &r2)); i++) |
| { |
| nw = XCNEW (struct dref_d); |
| nw->stmt = stmt_combining_refs (r1, r2); |
| nw->distance = r1->distance; |
| |
| new_chain->refs.safe_push (nw); |
| } |
| |
| new_chain->has_max_use_after = false; |
| root_stmt = get_chain_root (new_chain)->stmt; |
| for (i = 1; new_chain->refs.iterate (i, &nw); i++) |
| { |
| if (nw->distance == new_chain->length |
| && !stmt_dominates_stmt_p (nw->stmt, root_stmt)) |
| { |
| new_chain->has_max_use_after = true; |
| break; |
| } |
| } |
| |
| ch1->combined = true; |
| ch2->combined = true; |
| return new_chain; |
| } |
| |
| /* Try to combine the CHAINS. */ |
| |
| static void |
| try_combine_chains (vec<chain_p> *chains) |
| { |
| unsigned i, j; |
| chain_p ch1, ch2, cch; |
| auto_vec<chain_p> worklist; |
| |
| FOR_EACH_VEC_ELT (*chains, i, ch1) |
| if (chain_can_be_combined_p (ch1)) |
| worklist.safe_push (ch1); |
| |
| while (!worklist.is_empty ()) |
| { |
| ch1 = worklist.pop (); |
| if (!chain_can_be_combined_p (ch1)) |
| continue; |
| |
| FOR_EACH_VEC_ELT (*chains, j, ch2) |
| { |
| if (!chain_can_be_combined_p (ch2)) |
| continue; |
| |
| cch = combine_chains (ch1, ch2); |
| if (cch) |
| { |
| worklist.safe_push (cch); |
| chains->safe_push (cch); |
| break; |
| } |
| } |
| } |
| } |
| |
| /* Prepare initializers for CHAIN in LOOP. Returns false if this is |
| impossible because one of these initializers may trap, true otherwise. */ |
| |
| static bool |
| prepare_initializers_chain (struct loop *loop, chain_p chain) |
| { |
| unsigned i, n = (chain->type == CT_INVARIANT) ? 1 : chain->length; |
| struct data_reference *dr = get_chain_root (chain)->ref; |
| tree init; |
| dref laref; |
| edge entry = loop_preheader_edge (loop); |
| |
| /* Find the initializers for the variables, and check that they cannot |
| trap. */ |
| chain->inits.create (n); |
| for (i = 0; i < n; i++) |
| chain->inits.quick_push (NULL_TREE); |
| |
| /* If we have replaced some looparound phi nodes, use their initializers |
| instead of creating our own. */ |
| FOR_EACH_VEC_ELT (chain->refs, i, laref) |
| { |
| if (gimple_code (laref->stmt) != GIMPLE_PHI) |
| continue; |
| |
| gcc_assert (laref->distance > 0); |
| chain->inits[n - laref->distance] |
| = PHI_ARG_DEF_FROM_EDGE (laref->stmt, entry); |
| } |
| |
| for (i = 0; i < n; i++) |
| { |
| gimple_seq stmts = NULL; |
| |
| if (chain->inits[i] != NULL_TREE) |
| continue; |
| |
| init = ref_at_iteration (dr, (int) i - n, &stmts); |
| if (!chain->all_always_accessed && tree_could_trap_p (init)) |
| { |
| gimple_seq_discard (stmts); |
| return false; |
| } |
| |
| if (stmts) |
| gsi_insert_seq_on_edge_immediate (entry, stmts); |
| |
| chain->inits[i] = init; |
| } |
| |
| return true; |
| } |
| |
| /* Prepare initializers for CHAINS in LOOP, and free chains that cannot |
| be used because the initializers might trap. */ |
| |
| static void |
| prepare_initializers (struct loop *loop, vec<chain_p> chains) |
| { |
| chain_p chain; |
| unsigned i; |
| |
| for (i = 0; i < chains.length (); ) |
| { |
| chain = chains[i]; |
| if (prepare_initializers_chain (loop, chain)) |
| i++; |
| else |
| { |
| release_chain (chain); |
| chains.unordered_remove (i); |
| } |
| } |
| } |
| |
| /* Performs predictive commoning for LOOP. Returns true if LOOP was |
| unrolled. */ |
| |
| static bool |
| tree_predictive_commoning_loop (struct loop *loop) |
| { |
| vec<data_reference_p> datarefs; |
| vec<ddr_p> dependences; |
| struct component *components; |
| vec<chain_p> chains = vNULL; |
| unsigned unroll_factor; |
| struct tree_niter_desc desc; |
| bool unroll = false; |
| edge exit; |
| bitmap tmp_vars; |
| |
| if (dump_file && (dump_flags & TDF_DETAILS)) |
| fprintf (dump_file, "Processing loop %d\n", loop->num); |
| |
| /* Find the data references and split them into components according to their |
| dependence relations. */ |
| auto_vec<loop_p, 3> loop_nest; |
| dependences.create (10); |
| datarefs.create (10); |
| if (! compute_data_dependences_for_loop (loop, true, &loop_nest, &datarefs, |
| &dependences)) |
| { |
| if (dump_file && (dump_flags & TDF_DETAILS)) |
| fprintf (dump_file, "Cannot analyze data dependencies\n"); |
| free_data_refs (datarefs); |
| free_dependence_relations (dependences); |
| return false; |
| } |
| |
| if (dump_file && (dump_flags & TDF_DETAILS)) |
| dump_data_dependence_relations (dump_file, dependences); |
| |
| components = split_data_refs_to_components (loop, datarefs, dependences); |
| loop_nest.release (); |
| free_dependence_relations (dependences); |
| if (!components) |
| { |
| free_data_refs (datarefs); |
| free_affine_expand_cache (&name_expansions); |
| return false; |
| } |
| |
| if (dump_file && (dump_flags & TDF_DETAILS)) |
| { |
| fprintf (dump_file, "Initial state:\n\n"); |
| dump_components (dump_file, components); |
| } |
| |
| /* Find the suitable components and split them into chains. */ |
| components = filter_suitable_components (loop, components); |
| |
| tmp_vars = BITMAP_ALLOC (NULL); |
| looparound_phis = BITMAP_ALLOC (NULL); |
| determine_roots (loop, components, &chains); |
| release_components (components); |
| |
| if (!chains.exists ()) |
| { |
| if (dump_file && (dump_flags & TDF_DETAILS)) |
| fprintf (dump_file, |
| "Predictive commoning failed: no suitable chains\n"); |
| goto end; |
| } |
| prepare_initializers (loop, chains); |
| |
| /* Try to combine the chains that are always worked with together. */ |
| try_combine_chains (&chains); |
| |
| if (dump_file && (dump_flags & TDF_DETAILS)) |
| { |
| fprintf (dump_file, "Before commoning:\n\n"); |
| dump_chains (dump_file, chains); |
| } |
| |
| /* Determine the unroll factor, and if the loop should be unrolled, ensure |
| that its number of iterations is divisible by the factor. */ |
| unroll_factor = determine_unroll_factor (chains); |
| scev_reset (); |
| unroll = (unroll_factor > 1 |
| && can_unroll_loop_p (loop, unroll_factor, &desc)); |
| exit = single_dom_exit (loop); |
| |
| /* Execute the predictive commoning transformations, and possibly unroll the |
| loop. */ |
| if (unroll) |
| { |
| struct epcc_data dta; |
| |
| if (dump_file && (dump_flags & TDF_DETAILS)) |
| fprintf (dump_file, "Unrolling %u times.\n", unroll_factor); |
| |
| dta.chains = chains; |
| dta.tmp_vars = tmp_vars; |
| |
| update_ssa (TODO_update_ssa_only_virtuals); |
| |
| /* Cfg manipulations performed in tree_transform_and_unroll_loop before |
| execute_pred_commoning_cbck is called may cause phi nodes to be |
| reallocated, which is a problem since CHAINS may point to these |
| statements. To fix this, we store the ssa names defined by the |
| phi nodes here instead of the phi nodes themselves, and restore |
| the phi nodes in execute_pred_commoning_cbck. A bit hacky. */ |
| replace_phis_by_defined_names (chains); |
| |
| tree_transform_and_unroll_loop (loop, unroll_factor, exit, &desc, |
| execute_pred_commoning_cbck, &dta); |
| eliminate_temp_copies (loop, tmp_vars); |
| } |
| else |
| { |
| if (dump_file && (dump_flags & TDF_DETAILS)) |
| fprintf (dump_file, |
| "Executing predictive commoning without unrolling.\n"); |
| execute_pred_commoning (loop, chains, tmp_vars); |
| } |
| |
| end: ; |
| release_chains (chains); |
| free_data_refs (datarefs); |
| BITMAP_FREE (tmp_vars); |
| BITMAP_FREE (looparound_phis); |
| |
| free_affine_expand_cache (&name_expansions); |
| |
| return unroll; |
| } |
| |
| /* Runs predictive commoning. */ |
| |
| unsigned |
| tree_predictive_commoning (void) |
| { |
| bool unrolled = false; |
| struct loop *loop; |
| unsigned ret = 0; |
| |
| initialize_original_copy_tables (); |
| FOR_EACH_LOOP (loop, LI_ONLY_INNERMOST) |
| if (optimize_loop_for_speed_p (loop)) |
| { |
| unrolled |= tree_predictive_commoning_loop (loop); |
| } |
| |
| if (unrolled) |
| { |
| scev_reset (); |
| ret = TODO_cleanup_cfg; |
| } |
| free_original_copy_tables (); |
| |
| return ret; |
| } |
| |
| /* Predictive commoning Pass. */ |
| |
| static unsigned |
| run_tree_predictive_commoning (struct function *fun) |
| { |
| if (number_of_loops (fun) <= 1) |
| return 0; |
| |
| return tree_predictive_commoning (); |
| } |
| |
| namespace { |
| |
| const pass_data pass_data_predcom = |
| { |
| GIMPLE_PASS, /* type */ |
| "pcom", /* name */ |
| OPTGROUP_LOOP, /* optinfo_flags */ |
| TV_PREDCOM, /* tv_id */ |
| PROP_cfg, /* properties_required */ |
| 0, /* properties_provided */ |
| 0, /* properties_destroyed */ |
| 0, /* todo_flags_start */ |
| TODO_update_ssa_only_virtuals, /* todo_flags_finish */ |
| }; |
| |
| class pass_predcom : public gimple_opt_pass |
| { |
| public: |
| pass_predcom (gcc::context *ctxt) |
| : gimple_opt_pass (pass_data_predcom, ctxt) |
| {} |
| |
| /* opt_pass methods: */ |
| virtual bool gate (function *) { return flag_predictive_commoning != 0; } |
| virtual unsigned int execute (function *fun) |
| { |
| return run_tree_predictive_commoning (fun); |
| } |
| |
| }; // class pass_predcom |
| |
| } // anon namespace |
| |
| gimple_opt_pass * |
| make_pass_predcom (gcc::context *ctxt) |
| { |
| return new pass_predcom (ctxt); |
| } |
| |
| |