| /* Loop Vectorization |
| Copyright (C) 2003-2019 Free Software Foundation, Inc. |
| Contributed by Dorit Naishlos <dorit@il.ibm.com> and |
| Ira Rosen <irar@il.ibm.com> |
| |
| This file is part of GCC. |
| |
| GCC is free software; you can redistribute it and/or modify it under |
| the terms of the GNU General Public License as published by the Free |
| Software Foundation; either version 3, or (at your option) any later |
| version. |
| |
| GCC is distributed in the hope that it will be useful, but WITHOUT ANY |
| WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with GCC; see the file COPYING3. If not see |
| <http://www.gnu.org/licenses/>. */ |
| |
| #include "config.h" |
| #include "system.h" |
| #include "coretypes.h" |
| #include "backend.h" |
| #include "target.h" |
| #include "rtl.h" |
| #include "tree.h" |
| #include "gimple.h" |
| #include "cfghooks.h" |
| #include "tree-pass.h" |
| #include "ssa.h" |
| #include "optabs-tree.h" |
| #include "diagnostic-core.h" |
| #include "fold-const.h" |
| #include "stor-layout.h" |
| #include "cfganal.h" |
| #include "gimplify.h" |
| #include "gimple-iterator.h" |
| #include "gimplify-me.h" |
| #include "tree-ssa-loop-ivopts.h" |
| #include "tree-ssa-loop-manip.h" |
| #include "tree-ssa-loop-niter.h" |
| #include "tree-ssa-loop.h" |
| #include "cfgloop.h" |
| #include "params.h" |
| #include "tree-scalar-evolution.h" |
| #include "tree-vectorizer.h" |
| #include "gimple-fold.h" |
| #include "cgraph.h" |
| #include "tree-cfg.h" |
| #include "tree-if-conv.h" |
| #include "internal-fn.h" |
| #include "tree-vector-builder.h" |
| #include "vec-perm-indices.h" |
| #include "tree-eh.h" |
| |
| /* Loop Vectorization Pass. |
| |
| This pass tries to vectorize loops. |
| |
| For example, the vectorizer transforms the following simple loop: |
| |
| short a[N]; short b[N]; short c[N]; int i; |
| |
| for (i=0; i<N; i++){ |
| a[i] = b[i] + c[i]; |
| } |
| |
| as if it was manually vectorized by rewriting the source code into: |
| |
| typedef int __attribute__((mode(V8HI))) v8hi; |
| short a[N]; short b[N]; short c[N]; int i; |
| v8hi *pa = (v8hi*)a, *pb = (v8hi*)b, *pc = (v8hi*)c; |
| v8hi va, vb, vc; |
| |
| for (i=0; i<N/8; i++){ |
| vb = pb[i]; |
| vc = pc[i]; |
| va = vb + vc; |
| pa[i] = va; |
| } |
| |
| The main entry to this pass is vectorize_loops(), in which |
| the vectorizer applies a set of analyses on a given set of loops, |
| followed by the actual vectorization transformation for the loops that |
| had successfully passed the analysis phase. |
| Throughout this pass we make a distinction between two types of |
| data: scalars (which are represented by SSA_NAMES), and memory references |
| ("data-refs"). These two types of data require different handling both |
| during analysis and transformation. The types of data-refs that the |
| vectorizer currently supports are ARRAY_REFS which base is an array DECL |
| (not a pointer), and INDIRECT_REFS through pointers; both array and pointer |
| accesses are required to have a simple (consecutive) access pattern. |
| |
| Analysis phase: |
| =============== |
| The driver for the analysis phase is vect_analyze_loop(). |
| It applies a set of analyses, some of which rely on the scalar evolution |
| analyzer (scev) developed by Sebastian Pop. |
| |
| During the analysis phase the vectorizer records some information |
| per stmt in a "stmt_vec_info" struct which is attached to each stmt in the |
| loop, as well as general information about the loop as a whole, which is |
| recorded in a "loop_vec_info" struct attached to each loop. |
| |
| Transformation phase: |
| ===================== |
| The loop transformation phase scans all the stmts in the loop, and |
| creates a vector stmt (or a sequence of stmts) for each scalar stmt S in |
| the loop that needs to be vectorized. It inserts the vector code sequence |
| just before the scalar stmt S, and records a pointer to the vector code |
| in STMT_VINFO_VEC_STMT (stmt_info) (stmt_info is the stmt_vec_info struct |
| attached to S). This pointer will be used for the vectorization of following |
| stmts which use the def of stmt S. Stmt S is removed if it writes to memory; |
| otherwise, we rely on dead code elimination for removing it. |
| |
| For example, say stmt S1 was vectorized into stmt VS1: |
| |
| VS1: vb = px[i]; |
| S1: b = x[i]; STMT_VINFO_VEC_STMT (stmt_info (S1)) = VS1 |
| S2: a = b; |
| |
| To vectorize stmt S2, the vectorizer first finds the stmt that defines |
| the operand 'b' (S1), and gets the relevant vector def 'vb' from the |
| vector stmt VS1 pointed to by STMT_VINFO_VEC_STMT (stmt_info (S1)). The |
| resulting sequence would be: |
| |
| VS1: vb = px[i]; |
| S1: b = x[i]; STMT_VINFO_VEC_STMT (stmt_info (S1)) = VS1 |
| VS2: va = vb; |
| S2: a = b; STMT_VINFO_VEC_STMT (stmt_info (S2)) = VS2 |
| |
| Operands that are not SSA_NAMEs, are data-refs that appear in |
| load/store operations (like 'x[i]' in S1), and are handled differently. |
| |
| Target modeling: |
| ================= |
| Currently the only target specific information that is used is the |
| size of the vector (in bytes) - "TARGET_VECTORIZE_UNITS_PER_SIMD_WORD". |
| Targets that can support different sizes of vectors, for now will need |
| to specify one value for "TARGET_VECTORIZE_UNITS_PER_SIMD_WORD". More |
| flexibility will be added in the future. |
| |
| Since we only vectorize operations which vector form can be |
| expressed using existing tree codes, to verify that an operation is |
| supported, the vectorizer checks the relevant optab at the relevant |
| machine_mode (e.g, optab_handler (add_optab, V8HImode)). If |
| the value found is CODE_FOR_nothing, then there's no target support, and |
| we can't vectorize the stmt. |
| |
| For additional information on this project see: |
| http://gcc.gnu.org/projects/tree-ssa/vectorization.html |
| */ |
| |
| static void vect_estimate_min_profitable_iters (loop_vec_info, int *, int *); |
| |
| /* Subroutine of vect_determine_vf_for_stmt that handles only one |
| statement. VECTYPE_MAYBE_SET_P is true if STMT_VINFO_VECTYPE |
| may already be set for general statements (not just data refs). */ |
| |
| static opt_result |
| vect_determine_vf_for_stmt_1 (stmt_vec_info stmt_info, |
| bool vectype_maybe_set_p, |
| poly_uint64 *vf, |
| vec<stmt_vec_info > *mask_producers) |
| { |
| gimple *stmt = stmt_info->stmt; |
| |
| if ((!STMT_VINFO_RELEVANT_P (stmt_info) |
| && !STMT_VINFO_LIVE_P (stmt_info)) |
| || gimple_clobber_p (stmt)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "skip.\n"); |
| return opt_result::success (); |
| } |
| |
| tree stmt_vectype, nunits_vectype; |
| opt_result res = vect_get_vector_types_for_stmt (stmt_info, &stmt_vectype, |
| &nunits_vectype); |
| if (!res) |
| return res; |
| |
| if (stmt_vectype) |
| { |
| if (STMT_VINFO_VECTYPE (stmt_info)) |
| /* The only case when a vectype had been already set is for stmts |
| that contain a data ref, or for "pattern-stmts" (stmts generated |
| by the vectorizer to represent/replace a certain idiom). */ |
| gcc_assert ((STMT_VINFO_DATA_REF (stmt_info) |
| || vectype_maybe_set_p) |
| && STMT_VINFO_VECTYPE (stmt_info) == stmt_vectype); |
| else if (stmt_vectype == boolean_type_node) |
| mask_producers->safe_push (stmt_info); |
| else |
| STMT_VINFO_VECTYPE (stmt_info) = stmt_vectype; |
| } |
| |
| if (nunits_vectype) |
| vect_update_max_nunits (vf, nunits_vectype); |
| |
| return opt_result::success (); |
| } |
| |
| /* Subroutine of vect_determine_vectorization_factor. Set the vector |
| types of STMT_INFO and all attached pattern statements and update |
| the vectorization factor VF accordingly. If some of the statements |
| produce a mask result whose vector type can only be calculated later, |
| add them to MASK_PRODUCERS. Return true on success or false if |
| something prevented vectorization. */ |
| |
| static opt_result |
| vect_determine_vf_for_stmt (stmt_vec_info stmt_info, poly_uint64 *vf, |
| vec<stmt_vec_info > *mask_producers) |
| { |
| vec_info *vinfo = stmt_info->vinfo; |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "==> examining statement: %G", |
| stmt_info->stmt); |
| opt_result res |
| = vect_determine_vf_for_stmt_1 (stmt_info, false, vf, mask_producers); |
| if (!res) |
| return res; |
| |
| if (STMT_VINFO_IN_PATTERN_P (stmt_info) |
| && STMT_VINFO_RELATED_STMT (stmt_info)) |
| { |
| gimple *pattern_def_seq = STMT_VINFO_PATTERN_DEF_SEQ (stmt_info); |
| stmt_info = STMT_VINFO_RELATED_STMT (stmt_info); |
| |
| /* If a pattern statement has def stmts, analyze them too. */ |
| for (gimple_stmt_iterator si = gsi_start (pattern_def_seq); |
| !gsi_end_p (si); gsi_next (&si)) |
| { |
| stmt_vec_info def_stmt_info = vinfo->lookup_stmt (gsi_stmt (si)); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "==> examining pattern def stmt: %G", |
| def_stmt_info->stmt); |
| if (!vect_determine_vf_for_stmt_1 (def_stmt_info, true, |
| vf, mask_producers)) |
| res = vect_determine_vf_for_stmt_1 (def_stmt_info, true, |
| vf, mask_producers); |
| if (!res) |
| return res; |
| } |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "==> examining pattern statement: %G", |
| stmt_info->stmt); |
| res = vect_determine_vf_for_stmt_1 (stmt_info, true, vf, mask_producers); |
| if (!res) |
| return res; |
| } |
| |
| return opt_result::success (); |
| } |
| |
| /* Function vect_determine_vectorization_factor |
| |
| Determine the vectorization factor (VF). VF is the number of data elements |
| that are operated upon in parallel in a single iteration of the vectorized |
| loop. For example, when vectorizing a loop that operates on 4byte elements, |
| on a target with vector size (VS) 16byte, the VF is set to 4, since 4 |
| elements can fit in a single vector register. |
| |
| We currently support vectorization of loops in which all types operated upon |
| are of the same size. Therefore this function currently sets VF according to |
| the size of the types operated upon, and fails if there are multiple sizes |
| in the loop. |
| |
| VF is also the factor by which the loop iterations are strip-mined, e.g.: |
| original loop: |
| for (i=0; i<N; i++){ |
| a[i] = b[i] + c[i]; |
| } |
| |
| vectorized loop: |
| for (i=0; i<N; i+=VF){ |
| a[i:VF] = b[i:VF] + c[i:VF]; |
| } |
| */ |
| |
| static opt_result |
| vect_determine_vectorization_factor (loop_vec_info loop_vinfo) |
| { |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| basic_block *bbs = LOOP_VINFO_BBS (loop_vinfo); |
| unsigned nbbs = loop->num_nodes; |
| poly_uint64 vectorization_factor = 1; |
| tree scalar_type = NULL_TREE; |
| gphi *phi; |
| tree vectype; |
| stmt_vec_info stmt_info; |
| unsigned i; |
| auto_vec<stmt_vec_info> mask_producers; |
| |
| DUMP_VECT_SCOPE ("vect_determine_vectorization_factor"); |
| |
| for (i = 0; i < nbbs; i++) |
| { |
| basic_block bb = bbs[i]; |
| |
| for (gphi_iterator si = gsi_start_phis (bb); !gsi_end_p (si); |
| gsi_next (&si)) |
| { |
| phi = si.phi (); |
| stmt_info = loop_vinfo->lookup_stmt (phi); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "==> examining phi: %G", |
| phi); |
| |
| gcc_assert (stmt_info); |
| |
| if (STMT_VINFO_RELEVANT_P (stmt_info) |
| || STMT_VINFO_LIVE_P (stmt_info)) |
| { |
| gcc_assert (!STMT_VINFO_VECTYPE (stmt_info)); |
| scalar_type = TREE_TYPE (PHI_RESULT (phi)); |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "get vectype for scalar type: %T\n", |
| scalar_type); |
| |
| vectype = get_vectype_for_scalar_type (scalar_type); |
| if (!vectype) |
| return opt_result::failure_at (phi, |
| "not vectorized: unsupported " |
| "data-type %T\n", |
| scalar_type); |
| STMT_VINFO_VECTYPE (stmt_info) = vectype; |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "vectype: %T\n", |
| vectype); |
| |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, "nunits = "); |
| dump_dec (MSG_NOTE, TYPE_VECTOR_SUBPARTS (vectype)); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| vect_update_max_nunits (&vectorization_factor, vectype); |
| } |
| } |
| |
| for (gimple_stmt_iterator si = gsi_start_bb (bb); !gsi_end_p (si); |
| gsi_next (&si)) |
| { |
| stmt_info = loop_vinfo->lookup_stmt (gsi_stmt (si)); |
| opt_result res |
| = vect_determine_vf_for_stmt (stmt_info, &vectorization_factor, |
| &mask_producers); |
| if (!res) |
| return res; |
| } |
| } |
| |
| /* TODO: Analyze cost. Decide if worth while to vectorize. */ |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, "vectorization factor = "); |
| dump_dec (MSG_NOTE, vectorization_factor); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| if (known_le (vectorization_factor, 1U)) |
| return opt_result::failure_at (vect_location, |
| "not vectorized: unsupported data-type\n"); |
| LOOP_VINFO_VECT_FACTOR (loop_vinfo) = vectorization_factor; |
| |
| for (i = 0; i < mask_producers.length (); i++) |
| { |
| stmt_info = mask_producers[i]; |
| opt_tree mask_type = vect_get_mask_type_for_stmt (stmt_info); |
| if (!mask_type) |
| return opt_result::propagate_failure (mask_type); |
| STMT_VINFO_VECTYPE (stmt_info) = mask_type; |
| } |
| |
| return opt_result::success (); |
| } |
| |
| |
| /* Function vect_is_simple_iv_evolution. |
| |
| FORNOW: A simple evolution of an induction variables in the loop is |
| considered a polynomial evolution. */ |
| |
| static bool |
| vect_is_simple_iv_evolution (unsigned loop_nb, tree access_fn, tree * init, |
| tree * step) |
| { |
| tree init_expr; |
| tree step_expr; |
| tree evolution_part = evolution_part_in_loop_num (access_fn, loop_nb); |
| basic_block bb; |
| |
| /* When there is no evolution in this loop, the evolution function |
| is not "simple". */ |
| if (evolution_part == NULL_TREE) |
| return false; |
| |
| /* When the evolution is a polynomial of degree >= 2 |
| the evolution function is not "simple". */ |
| if (tree_is_chrec (evolution_part)) |
| return false; |
| |
| step_expr = evolution_part; |
| init_expr = unshare_expr (initial_condition_in_loop_num (access_fn, loop_nb)); |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "step: %T, init: %T\n", |
| step_expr, init_expr); |
| |
| *init = init_expr; |
| *step = step_expr; |
| |
| if (TREE_CODE (step_expr) != INTEGER_CST |
| && (TREE_CODE (step_expr) != SSA_NAME |
| || ((bb = gimple_bb (SSA_NAME_DEF_STMT (step_expr))) |
| && flow_bb_inside_loop_p (get_loop (cfun, loop_nb), bb)) |
| || (!INTEGRAL_TYPE_P (TREE_TYPE (step_expr)) |
| && (!SCALAR_FLOAT_TYPE_P (TREE_TYPE (step_expr)) |
| || !flag_associative_math))) |
| && (TREE_CODE (step_expr) != REAL_CST |
| || !flag_associative_math)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "step unknown.\n"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* Return true if PHI, described by STMT_INFO, is the inner PHI in |
| what we are assuming is a double reduction. For example, given |
| a structure like this: |
| |
| outer1: |
| x_1 = PHI <x_4(outer2), ...>; |
| ... |
| |
| inner: |
| x_2 = PHI <x_1(outer1), ...>; |
| ... |
| x_3 = ...; |
| ... |
| |
| outer2: |
| x_4 = PHI <x_3(inner)>; |
| ... |
| |
| outer loop analysis would treat x_1 as a double reduction phi and |
| this function would then return true for x_2. */ |
| |
| static bool |
| vect_inner_phi_in_double_reduction_p (stmt_vec_info stmt_info, gphi *phi) |
| { |
| loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info); |
| use_operand_p use_p; |
| ssa_op_iter op_iter; |
| FOR_EACH_PHI_ARG (use_p, phi, op_iter, SSA_OP_USE) |
| if (stmt_vec_info def_info = loop_vinfo->lookup_def (USE_FROM_PTR (use_p))) |
| if (STMT_VINFO_DEF_TYPE (def_info) == vect_double_reduction_def) |
| return true; |
| return false; |
| } |
| |
| /* Function vect_analyze_scalar_cycles_1. |
| |
| Examine the cross iteration def-use cycles of scalar variables |
| in LOOP. LOOP_VINFO represents the loop that is now being |
| considered for vectorization (can be LOOP, or an outer-loop |
| enclosing LOOP). */ |
| |
| static void |
| vect_analyze_scalar_cycles_1 (loop_vec_info loop_vinfo, struct loop *loop) |
| { |
| basic_block bb = loop->header; |
| tree init, step; |
| auto_vec<stmt_vec_info, 64> worklist; |
| gphi_iterator gsi; |
| bool double_reduc; |
| |
| DUMP_VECT_SCOPE ("vect_analyze_scalar_cycles"); |
| |
| /* First - identify all inductions. Reduction detection assumes that all the |
| inductions have been identified, therefore, this order must not be |
| changed. */ |
| for (gsi = gsi_start_phis (bb); !gsi_end_p (gsi); gsi_next (&gsi)) |
| { |
| gphi *phi = gsi.phi (); |
| tree access_fn = NULL; |
| tree def = PHI_RESULT (phi); |
| stmt_vec_info stmt_vinfo = loop_vinfo->lookup_stmt (phi); |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "Analyze phi: %G", phi); |
| |
| /* Skip virtual phi's. The data dependences that are associated with |
| virtual defs/uses (i.e., memory accesses) are analyzed elsewhere. */ |
| if (virtual_operand_p (def)) |
| continue; |
| |
| STMT_VINFO_DEF_TYPE (stmt_vinfo) = vect_unknown_def_type; |
| |
| /* Analyze the evolution function. */ |
| access_fn = analyze_scalar_evolution (loop, def); |
| if (access_fn) |
| { |
| STRIP_NOPS (access_fn); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Access function of PHI: %T\n", access_fn); |
| STMT_VINFO_LOOP_PHI_EVOLUTION_BASE_UNCHANGED (stmt_vinfo) |
| = initial_condition_in_loop_num (access_fn, loop->num); |
| STMT_VINFO_LOOP_PHI_EVOLUTION_PART (stmt_vinfo) |
| = evolution_part_in_loop_num (access_fn, loop->num); |
| } |
| |
| if (!access_fn |
| || vect_inner_phi_in_double_reduction_p (stmt_vinfo, phi) |
| || !vect_is_simple_iv_evolution (loop->num, access_fn, &init, &step) |
| || (LOOP_VINFO_LOOP (loop_vinfo) != loop |
| && TREE_CODE (step) != INTEGER_CST)) |
| { |
| worklist.safe_push (stmt_vinfo); |
| continue; |
| } |
| |
| gcc_assert (STMT_VINFO_LOOP_PHI_EVOLUTION_BASE_UNCHANGED (stmt_vinfo) |
| != NULL_TREE); |
| gcc_assert (STMT_VINFO_LOOP_PHI_EVOLUTION_PART (stmt_vinfo) != NULL_TREE); |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "Detected induction.\n"); |
| STMT_VINFO_DEF_TYPE (stmt_vinfo) = vect_induction_def; |
| } |
| |
| |
| /* Second - identify all reductions and nested cycles. */ |
| while (worklist.length () > 0) |
| { |
| stmt_vec_info stmt_vinfo = worklist.pop (); |
| gphi *phi = as_a <gphi *> (stmt_vinfo->stmt); |
| tree def = PHI_RESULT (phi); |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "Analyze phi: %G", phi); |
| |
| gcc_assert (!virtual_operand_p (def) |
| && STMT_VINFO_DEF_TYPE (stmt_vinfo) == vect_unknown_def_type); |
| |
| stmt_vec_info reduc_stmt_info |
| = vect_force_simple_reduction (loop_vinfo, stmt_vinfo, |
| &double_reduc, false); |
| if (reduc_stmt_info) |
| { |
| if (double_reduc) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Detected double reduction.\n"); |
| |
| STMT_VINFO_DEF_TYPE (stmt_vinfo) = vect_double_reduction_def; |
| STMT_VINFO_DEF_TYPE (reduc_stmt_info) |
| = vect_double_reduction_def; |
| } |
| else |
| { |
| if (loop != LOOP_VINFO_LOOP (loop_vinfo)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Detected vectorizable nested cycle.\n"); |
| |
| STMT_VINFO_DEF_TYPE (stmt_vinfo) = vect_nested_cycle; |
| STMT_VINFO_DEF_TYPE (reduc_stmt_info) = vect_nested_cycle; |
| } |
| else |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Detected reduction.\n"); |
| |
| STMT_VINFO_DEF_TYPE (stmt_vinfo) = vect_reduction_def; |
| STMT_VINFO_DEF_TYPE (reduc_stmt_info) = vect_reduction_def; |
| /* Store the reduction cycles for possible vectorization in |
| loop-aware SLP if it was not detected as reduction |
| chain. */ |
| if (! REDUC_GROUP_FIRST_ELEMENT (reduc_stmt_info)) |
| LOOP_VINFO_REDUCTIONS (loop_vinfo).safe_push |
| (reduc_stmt_info); |
| } |
| } |
| } |
| else |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "Unknown def-use cycle pattern.\n"); |
| } |
| } |
| |
| |
| /* Function vect_analyze_scalar_cycles. |
| |
| Examine the cross iteration def-use cycles of scalar variables, by |
| analyzing the loop-header PHIs of scalar variables. Classify each |
| cycle as one of the following: invariant, induction, reduction, unknown. |
| We do that for the loop represented by LOOP_VINFO, and also to its |
| inner-loop, if exists. |
| Examples for scalar cycles: |
| |
| Example1: reduction: |
| |
| loop1: |
| for (i=0; i<N; i++) |
| sum += a[i]; |
| |
| Example2: induction: |
| |
| loop2: |
| for (i=0; i<N; i++) |
| a[i] = i; */ |
| |
| static void |
| vect_analyze_scalar_cycles (loop_vec_info loop_vinfo) |
| { |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| |
| vect_analyze_scalar_cycles_1 (loop_vinfo, loop); |
| |
| /* When vectorizing an outer-loop, the inner-loop is executed sequentially. |
| Reductions in such inner-loop therefore have different properties than |
| the reductions in the nest that gets vectorized: |
| 1. When vectorized, they are executed in the same order as in the original |
| scalar loop, so we can't change the order of computation when |
| vectorizing them. |
| 2. FIXME: Inner-loop reductions can be used in the inner-loop, so the |
| current checks are too strict. */ |
| |
| if (loop->inner) |
| vect_analyze_scalar_cycles_1 (loop_vinfo, loop->inner); |
| } |
| |
| /* Transfer group and reduction information from STMT_INFO to its |
| pattern stmt. */ |
| |
| static void |
| vect_fixup_reduc_chain (stmt_vec_info stmt_info) |
| { |
| stmt_vec_info firstp = STMT_VINFO_RELATED_STMT (stmt_info); |
| stmt_vec_info stmtp; |
| gcc_assert (!REDUC_GROUP_FIRST_ELEMENT (firstp) |
| && REDUC_GROUP_FIRST_ELEMENT (stmt_info)); |
| REDUC_GROUP_SIZE (firstp) = REDUC_GROUP_SIZE (stmt_info); |
| do |
| { |
| stmtp = STMT_VINFO_RELATED_STMT (stmt_info); |
| REDUC_GROUP_FIRST_ELEMENT (stmtp) = firstp; |
| stmt_info = REDUC_GROUP_NEXT_ELEMENT (stmt_info); |
| if (stmt_info) |
| REDUC_GROUP_NEXT_ELEMENT (stmtp) |
| = STMT_VINFO_RELATED_STMT (stmt_info); |
| } |
| while (stmt_info); |
| STMT_VINFO_DEF_TYPE (stmtp) = vect_reduction_def; |
| } |
| |
| /* Fixup scalar cycles that now have their stmts detected as patterns. */ |
| |
| static void |
| vect_fixup_scalar_cycles_with_patterns (loop_vec_info loop_vinfo) |
| { |
| stmt_vec_info first; |
| unsigned i; |
| |
| FOR_EACH_VEC_ELT (LOOP_VINFO_REDUCTION_CHAINS (loop_vinfo), i, first) |
| if (STMT_VINFO_IN_PATTERN_P (first)) |
| { |
| stmt_vec_info next = REDUC_GROUP_NEXT_ELEMENT (first); |
| while (next) |
| { |
| if (! STMT_VINFO_IN_PATTERN_P (next)) |
| break; |
| next = REDUC_GROUP_NEXT_ELEMENT (next); |
| } |
| /* If not all stmt in the chain are patterns try to handle |
| the chain without patterns. */ |
| if (! next) |
| { |
| vect_fixup_reduc_chain (first); |
| LOOP_VINFO_REDUCTION_CHAINS (loop_vinfo)[i] |
| = STMT_VINFO_RELATED_STMT (first); |
| } |
| } |
| } |
| |
| /* Function vect_get_loop_niters. |
| |
| Determine how many iterations the loop is executed and place it |
| in NUMBER_OF_ITERATIONS. Place the number of latch iterations |
| in NUMBER_OF_ITERATIONSM1. Place the condition under which the |
| niter information holds in ASSUMPTIONS. |
| |
| Return the loop exit condition. */ |
| |
| |
| static gcond * |
| vect_get_loop_niters (struct loop *loop, tree *assumptions, |
| tree *number_of_iterations, tree *number_of_iterationsm1) |
| { |
| edge exit = single_exit (loop); |
| struct tree_niter_desc niter_desc; |
| tree niter_assumptions, niter, may_be_zero; |
| gcond *cond = get_loop_exit_condition (loop); |
| |
| *assumptions = boolean_true_node; |
| *number_of_iterationsm1 = chrec_dont_know; |
| *number_of_iterations = chrec_dont_know; |
| DUMP_VECT_SCOPE ("get_loop_niters"); |
| |
| if (!exit) |
| return cond; |
| |
| niter = chrec_dont_know; |
| may_be_zero = NULL_TREE; |
| niter_assumptions = boolean_true_node; |
| if (!number_of_iterations_exit_assumptions (loop, exit, &niter_desc, NULL) |
| || chrec_contains_undetermined (niter_desc.niter)) |
| return cond; |
| |
| niter_assumptions = niter_desc.assumptions; |
| may_be_zero = niter_desc.may_be_zero; |
| niter = niter_desc.niter; |
| |
| if (may_be_zero && integer_zerop (may_be_zero)) |
| may_be_zero = NULL_TREE; |
| |
| if (may_be_zero) |
| { |
| if (COMPARISON_CLASS_P (may_be_zero)) |
| { |
| /* Try to combine may_be_zero with assumptions, this can simplify |
| computation of niter expression. */ |
| if (niter_assumptions && !integer_nonzerop (niter_assumptions)) |
| niter_assumptions = fold_build2 (TRUTH_AND_EXPR, boolean_type_node, |
| niter_assumptions, |
| fold_build1 (TRUTH_NOT_EXPR, |
| boolean_type_node, |
| may_be_zero)); |
| else |
| niter = fold_build3 (COND_EXPR, TREE_TYPE (niter), may_be_zero, |
| build_int_cst (TREE_TYPE (niter), 0), |
| rewrite_to_non_trapping_overflow (niter)); |
| |
| may_be_zero = NULL_TREE; |
| } |
| else if (integer_nonzerop (may_be_zero)) |
| { |
| *number_of_iterationsm1 = build_int_cst (TREE_TYPE (niter), 0); |
| *number_of_iterations = build_int_cst (TREE_TYPE (niter), 1); |
| return cond; |
| } |
| else |
| return cond; |
| } |
| |
| *assumptions = niter_assumptions; |
| *number_of_iterationsm1 = niter; |
| |
| /* We want the number of loop header executions which is the number |
| of latch executions plus one. |
| ??? For UINT_MAX latch executions this number overflows to zero |
| for loops like do { n++; } while (n != 0); */ |
| if (niter && !chrec_contains_undetermined (niter)) |
| niter = fold_build2 (PLUS_EXPR, TREE_TYPE (niter), unshare_expr (niter), |
| build_int_cst (TREE_TYPE (niter), 1)); |
| *number_of_iterations = niter; |
| |
| return cond; |
| } |
| |
| /* Function bb_in_loop_p |
| |
| Used as predicate for dfs order traversal of the loop bbs. */ |
| |
| static bool |
| bb_in_loop_p (const_basic_block bb, const void *data) |
| { |
| const struct loop *const loop = (const struct loop *)data; |
| if (flow_bb_inside_loop_p (loop, bb)) |
| return true; |
| return false; |
| } |
| |
| |
| /* Create and initialize a new loop_vec_info struct for LOOP_IN, as well as |
| stmt_vec_info structs for all the stmts in LOOP_IN. */ |
| |
| _loop_vec_info::_loop_vec_info (struct loop *loop_in, vec_info_shared *shared) |
| : vec_info (vec_info::loop, init_cost (loop_in), shared), |
| loop (loop_in), |
| bbs (XCNEWVEC (basic_block, loop->num_nodes)), |
| num_itersm1 (NULL_TREE), |
| num_iters (NULL_TREE), |
| num_iters_unchanged (NULL_TREE), |
| num_iters_assumptions (NULL_TREE), |
| th (0), |
| versioning_threshold (0), |
| vectorization_factor (0), |
| max_vectorization_factor (0), |
| mask_skip_niters (NULL_TREE), |
| mask_compare_type (NULL_TREE), |
| simd_if_cond (NULL_TREE), |
| unaligned_dr (NULL), |
| peeling_for_alignment (0), |
| ptr_mask (0), |
| ivexpr_map (NULL), |
| scan_map (NULL), |
| slp_unrolling_factor (1), |
| single_scalar_iteration_cost (0), |
| vectorizable (false), |
| can_fully_mask_p (true), |
| fully_masked_p (false), |
| peeling_for_gaps (false), |
| peeling_for_niter (false), |
| operands_swapped (false), |
| no_data_dependencies (false), |
| has_mask_store (false), |
| scalar_loop (NULL), |
| orig_loop_info (NULL) |
| { |
| /* CHECKME: We want to visit all BBs before their successors (except for |
| latch blocks, for which this assertion wouldn't hold). In the simple |
| case of the loop forms we allow, a dfs order of the BBs would the same |
| as reversed postorder traversal, so we are safe. */ |
| |
| unsigned int nbbs = dfs_enumerate_from (loop->header, 0, bb_in_loop_p, |
| bbs, loop->num_nodes, loop); |
| gcc_assert (nbbs == loop->num_nodes); |
| |
| for (unsigned int i = 0; i < nbbs; i++) |
| { |
| basic_block bb = bbs[i]; |
| gimple_stmt_iterator si; |
| |
| for (si = gsi_start_phis (bb); !gsi_end_p (si); gsi_next (&si)) |
| { |
| gimple *phi = gsi_stmt (si); |
| gimple_set_uid (phi, 0); |
| add_stmt (phi); |
| } |
| |
| for (si = gsi_start_bb (bb); !gsi_end_p (si); gsi_next (&si)) |
| { |
| gimple *stmt = gsi_stmt (si); |
| gimple_set_uid (stmt, 0); |
| add_stmt (stmt); |
| /* If .GOMP_SIMD_LANE call for the current loop has 3 arguments, the |
| third argument is the #pragma omp simd if (x) condition, when 0, |
| loop shouldn't be vectorized, when non-zero constant, it should |
| be vectorized normally, otherwise versioned with vectorized loop |
| done if the condition is non-zero at runtime. */ |
| if (loop_in->simduid |
| && is_gimple_call (stmt) |
| && gimple_call_internal_p (stmt) |
| && gimple_call_internal_fn (stmt) == IFN_GOMP_SIMD_LANE |
| && gimple_call_num_args (stmt) >= 3 |
| && TREE_CODE (gimple_call_arg (stmt, 0)) == SSA_NAME |
| && (loop_in->simduid |
| == SSA_NAME_VAR (gimple_call_arg (stmt, 0)))) |
| { |
| tree arg = gimple_call_arg (stmt, 2); |
| if (integer_zerop (arg) || TREE_CODE (arg) == SSA_NAME) |
| simd_if_cond = arg; |
| else |
| gcc_assert (integer_nonzerop (arg)); |
| } |
| } |
| } |
| } |
| |
| /* Free all levels of MASKS. */ |
| |
| void |
| release_vec_loop_masks (vec_loop_masks *masks) |
| { |
| rgroup_masks *rgm; |
| unsigned int i; |
| FOR_EACH_VEC_ELT (*masks, i, rgm) |
| rgm->masks.release (); |
| masks->release (); |
| } |
| |
| /* Free all memory used by the _loop_vec_info, as well as all the |
| stmt_vec_info structs of all the stmts in the loop. */ |
| |
| _loop_vec_info::~_loop_vec_info () |
| { |
| int nbbs; |
| gimple_stmt_iterator si; |
| int j; |
| |
| nbbs = loop->num_nodes; |
| for (j = 0; j < nbbs; j++) |
| { |
| basic_block bb = bbs[j]; |
| for (si = gsi_start_bb (bb); !gsi_end_p (si); ) |
| { |
| gimple *stmt = gsi_stmt (si); |
| |
| /* We may have broken canonical form by moving a constant |
| into RHS1 of a commutative op. Fix such occurrences. */ |
| if (operands_swapped && is_gimple_assign (stmt)) |
| { |
| enum tree_code code = gimple_assign_rhs_code (stmt); |
| |
| if ((code == PLUS_EXPR |
| || code == POINTER_PLUS_EXPR |
| || code == MULT_EXPR) |
| && CONSTANT_CLASS_P (gimple_assign_rhs1 (stmt))) |
| swap_ssa_operands (stmt, |
| gimple_assign_rhs1_ptr (stmt), |
| gimple_assign_rhs2_ptr (stmt)); |
| else if (code == COND_EXPR |
| && CONSTANT_CLASS_P (gimple_assign_rhs2 (stmt))) |
| { |
| tree cond_expr = gimple_assign_rhs1 (stmt); |
| enum tree_code cond_code = TREE_CODE (cond_expr); |
| |
| if (TREE_CODE_CLASS (cond_code) == tcc_comparison) |
| { |
| bool honor_nans = HONOR_NANS (TREE_OPERAND (cond_expr, |
| 0)); |
| cond_code = invert_tree_comparison (cond_code, |
| honor_nans); |
| if (cond_code != ERROR_MARK) |
| { |
| TREE_SET_CODE (cond_expr, cond_code); |
| swap_ssa_operands (stmt, |
| gimple_assign_rhs2_ptr (stmt), |
| gimple_assign_rhs3_ptr (stmt)); |
| } |
| } |
| } |
| } |
| gsi_next (&si); |
| } |
| } |
| |
| free (bbs); |
| |
| release_vec_loop_masks (&masks); |
| delete ivexpr_map; |
| delete scan_map; |
| |
| loop->aux = NULL; |
| } |
| |
| /* Return an invariant or register for EXPR and emit necessary |
| computations in the LOOP_VINFO loop preheader. */ |
| |
| tree |
| cse_and_gimplify_to_preheader (loop_vec_info loop_vinfo, tree expr) |
| { |
| if (is_gimple_reg (expr) |
| || is_gimple_min_invariant (expr)) |
| return expr; |
| |
| if (! loop_vinfo->ivexpr_map) |
| loop_vinfo->ivexpr_map = new hash_map<tree_operand_hash, tree>; |
| tree &cached = loop_vinfo->ivexpr_map->get_or_insert (expr); |
| if (! cached) |
| { |
| gimple_seq stmts = NULL; |
| cached = force_gimple_operand (unshare_expr (expr), |
| &stmts, true, NULL_TREE); |
| if (stmts) |
| { |
| edge e = loop_preheader_edge (LOOP_VINFO_LOOP (loop_vinfo)); |
| gsi_insert_seq_on_edge_immediate (e, stmts); |
| } |
| } |
| return cached; |
| } |
| |
| /* Return true if we can use CMP_TYPE as the comparison type to produce |
| all masks required to mask LOOP_VINFO. */ |
| |
| static bool |
| can_produce_all_loop_masks_p (loop_vec_info loop_vinfo, tree cmp_type) |
| { |
| rgroup_masks *rgm; |
| unsigned int i; |
| FOR_EACH_VEC_ELT (LOOP_VINFO_MASKS (loop_vinfo), i, rgm) |
| if (rgm->mask_type != NULL_TREE |
| && !direct_internal_fn_supported_p (IFN_WHILE_ULT, |
| cmp_type, rgm->mask_type, |
| OPTIMIZE_FOR_SPEED)) |
| return false; |
| return true; |
| } |
| |
| /* Calculate the maximum number of scalars per iteration for every |
| rgroup in LOOP_VINFO. */ |
| |
| static unsigned int |
| vect_get_max_nscalars_per_iter (loop_vec_info loop_vinfo) |
| { |
| unsigned int res = 1; |
| unsigned int i; |
| rgroup_masks *rgm; |
| FOR_EACH_VEC_ELT (LOOP_VINFO_MASKS (loop_vinfo), i, rgm) |
| res = MAX (res, rgm->max_nscalars_per_iter); |
| return res; |
| } |
| |
| /* Each statement in LOOP_VINFO can be masked where necessary. Check |
| whether we can actually generate the masks required. Return true if so, |
| storing the type of the scalar IV in LOOP_VINFO_MASK_COMPARE_TYPE. */ |
| |
| static bool |
| vect_verify_full_masking (loop_vec_info loop_vinfo) |
| { |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| unsigned int min_ni_width; |
| unsigned int max_nscalars_per_iter |
| = vect_get_max_nscalars_per_iter (loop_vinfo); |
| |
| /* Use a normal loop if there are no statements that need masking. |
| This only happens in rare degenerate cases: it means that the loop |
| has no loads, no stores, and no live-out values. */ |
| if (LOOP_VINFO_MASKS (loop_vinfo).is_empty ()) |
| return false; |
| |
| /* Get the maximum number of iterations that is representable |
| in the counter type. */ |
| tree ni_type = TREE_TYPE (LOOP_VINFO_NITERSM1 (loop_vinfo)); |
| widest_int max_ni = wi::to_widest (TYPE_MAX_VALUE (ni_type)) + 1; |
| |
| /* Get a more refined estimate for the number of iterations. */ |
| widest_int max_back_edges; |
| if (max_loop_iterations (loop, &max_back_edges)) |
| max_ni = wi::smin (max_ni, max_back_edges + 1); |
| |
| /* Account for rgroup masks, in which each bit is replicated N times. */ |
| max_ni *= max_nscalars_per_iter; |
| |
| /* Work out how many bits we need to represent the limit. */ |
| min_ni_width = wi::min_precision (max_ni, UNSIGNED); |
| |
| /* Find a scalar mode for which WHILE_ULT is supported. */ |
| opt_scalar_int_mode cmp_mode_iter; |
| tree cmp_type = NULL_TREE; |
| tree iv_type = NULL_TREE; |
| widest_int iv_limit = vect_iv_limit_for_full_masking (loop_vinfo); |
| unsigned int iv_precision = UINT_MAX; |
| |
| if (iv_limit != -1) |
| iv_precision = wi::min_precision (iv_limit * max_nscalars_per_iter, |
| UNSIGNED); |
| |
| FOR_EACH_MODE_IN_CLASS (cmp_mode_iter, MODE_INT) |
| { |
| unsigned int cmp_bits = GET_MODE_BITSIZE (cmp_mode_iter.require ()); |
| if (cmp_bits >= min_ni_width |
| && targetm.scalar_mode_supported_p (cmp_mode_iter.require ())) |
| { |
| tree this_type = build_nonstandard_integer_type (cmp_bits, true); |
| if (this_type |
| && can_produce_all_loop_masks_p (loop_vinfo, this_type)) |
| { |
| /* Although we could stop as soon as we find a valid mode, |
| there are at least two reasons why that's not always the |
| best choice: |
| |
| - An IV that's Pmode or wider is more likely to be reusable |
| in address calculations than an IV that's narrower than |
| Pmode. |
| |
| - Doing the comparison in IV_PRECISION or wider allows |
| a natural 0-based IV, whereas using a narrower comparison |
| type requires mitigations against wrap-around. |
| |
| Conversely, if the IV limit is variable, doing the comparison |
| in a wider type than the original type can introduce |
| unnecessary extensions, so picking the widest valid mode |
| is not always a good choice either. |
| |
| Here we prefer the first IV type that's Pmode or wider, |
| and the first comparison type that's IV_PRECISION or wider. |
| (The comparison type must be no wider than the IV type, |
| to avoid extensions in the vector loop.) |
| |
| ??? We might want to try continuing beyond Pmode for ILP32 |
| targets if CMP_BITS < IV_PRECISION. */ |
| iv_type = this_type; |
| if (!cmp_type || iv_precision > TYPE_PRECISION (cmp_type)) |
| cmp_type = this_type; |
| if (cmp_bits >= GET_MODE_BITSIZE (Pmode)) |
| break; |
| } |
| } |
| } |
| |
| if (!cmp_type) |
| return false; |
| |
| LOOP_VINFO_MASK_COMPARE_TYPE (loop_vinfo) = cmp_type; |
| LOOP_VINFO_MASK_IV_TYPE (loop_vinfo) = iv_type; |
| return true; |
| } |
| |
| /* Calculate the cost of one scalar iteration of the loop. */ |
| static void |
| vect_compute_single_scalar_iteration_cost (loop_vec_info loop_vinfo) |
| { |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| basic_block *bbs = LOOP_VINFO_BBS (loop_vinfo); |
| int nbbs = loop->num_nodes, factor; |
| int innerloop_iters, i; |
| |
| DUMP_VECT_SCOPE ("vect_compute_single_scalar_iteration_cost"); |
| |
| /* Gather costs for statements in the scalar loop. */ |
| |
| /* FORNOW. */ |
| innerloop_iters = 1; |
| if (loop->inner) |
| innerloop_iters = 50; /* FIXME */ |
| |
| for (i = 0; i < nbbs; i++) |
| { |
| gimple_stmt_iterator si; |
| basic_block bb = bbs[i]; |
| |
| if (bb->loop_father == loop->inner) |
| factor = innerloop_iters; |
| else |
| factor = 1; |
| |
| for (si = gsi_start_bb (bb); !gsi_end_p (si); gsi_next (&si)) |
| { |
| gimple *stmt = gsi_stmt (si); |
| stmt_vec_info stmt_info = loop_vinfo->lookup_stmt (stmt); |
| |
| if (!is_gimple_assign (stmt) && !is_gimple_call (stmt)) |
| continue; |
| |
| /* Skip stmts that are not vectorized inside the loop. */ |
| stmt_vec_info vstmt_info = vect_stmt_to_vectorize (stmt_info); |
| if (!STMT_VINFO_RELEVANT_P (vstmt_info) |
| && (!STMT_VINFO_LIVE_P (vstmt_info) |
| || !VECTORIZABLE_CYCLE_DEF |
| (STMT_VINFO_DEF_TYPE (vstmt_info)))) |
| continue; |
| |
| vect_cost_for_stmt kind; |
| if (STMT_VINFO_DATA_REF (stmt_info)) |
| { |
| if (DR_IS_READ (STMT_VINFO_DATA_REF (stmt_info))) |
| kind = scalar_load; |
| else |
| kind = scalar_store; |
| } |
| else |
| kind = scalar_stmt; |
| |
| record_stmt_cost (&LOOP_VINFO_SCALAR_ITERATION_COST (loop_vinfo), |
| factor, kind, stmt_info, 0, vect_prologue); |
| } |
| } |
| |
| /* Now accumulate cost. */ |
| void *target_cost_data = init_cost (loop); |
| stmt_info_for_cost *si; |
| int j; |
| FOR_EACH_VEC_ELT (LOOP_VINFO_SCALAR_ITERATION_COST (loop_vinfo), |
| j, si) |
| (void) add_stmt_cost (target_cost_data, si->count, |
| si->kind, si->stmt_info, si->misalign, |
| vect_body); |
| unsigned dummy, body_cost = 0; |
| finish_cost (target_cost_data, &dummy, &body_cost, &dummy); |
| destroy_cost_data (target_cost_data); |
| LOOP_VINFO_SINGLE_SCALAR_ITERATION_COST (loop_vinfo) = body_cost; |
| } |
| |
| |
| /* Function vect_analyze_loop_form_1. |
| |
| Verify that certain CFG restrictions hold, including: |
| - the loop has a pre-header |
| - the loop has a single entry and exit |
| - the loop exit condition is simple enough |
| - the number of iterations can be analyzed, i.e, a countable loop. The |
| niter could be analyzed under some assumptions. */ |
| |
| opt_result |
| vect_analyze_loop_form_1 (struct loop *loop, gcond **loop_cond, |
| tree *assumptions, tree *number_of_iterationsm1, |
| tree *number_of_iterations, gcond **inner_loop_cond) |
| { |
| DUMP_VECT_SCOPE ("vect_analyze_loop_form"); |
| |
| /* Different restrictions apply when we are considering an inner-most loop, |
| vs. an outer (nested) loop. |
| (FORNOW. May want to relax some of these restrictions in the future). */ |
| |
| if (!loop->inner) |
| { |
| /* Inner-most loop. We currently require that the number of BBs is |
| exactly 2 (the header and latch). Vectorizable inner-most loops |
| look like this: |
| |
| (pre-header) |
| | |
| header <--------+ |
| | | | |
| | +--> latch --+ |
| | |
| (exit-bb) */ |
| |
| if (loop->num_nodes != 2) |
| return opt_result::failure_at (vect_location, |
| "not vectorized:" |
| " control flow in loop.\n"); |
| |
| if (empty_block_p (loop->header)) |
| return opt_result::failure_at (vect_location, |
| "not vectorized: empty loop.\n"); |
| } |
| else |
| { |
| struct loop *innerloop = loop->inner; |
| edge entryedge; |
| |
| /* Nested loop. We currently require that the loop is doubly-nested, |
| contains a single inner loop, and the number of BBs is exactly 5. |
| Vectorizable outer-loops look like this: |
| |
| (pre-header) |
| | |
| header <---+ |
| | | |
| inner-loop | |
| | | |
| tail ------+ |
| | |
| (exit-bb) |
| |
| The inner-loop has the properties expected of inner-most loops |
| as described above. */ |
| |
| if ((loop->inner)->inner || (loop->inner)->next) |
| return opt_result::failure_at (vect_location, |
| "not vectorized:" |
| " multiple nested loops.\n"); |
| |
| if (loop->num_nodes != 5) |
| return opt_result::failure_at (vect_location, |
| "not vectorized:" |
| " control flow in loop.\n"); |
| |
| entryedge = loop_preheader_edge (innerloop); |
| if (entryedge->src != loop->header |
| || !single_exit (innerloop) |
| || single_exit (innerloop)->dest != EDGE_PRED (loop->latch, 0)->src) |
| return opt_result::failure_at (vect_location, |
| "not vectorized:" |
| " unsupported outerloop form.\n"); |
| |
| /* Analyze the inner-loop. */ |
| tree inner_niterm1, inner_niter, inner_assumptions; |
| opt_result res |
| = vect_analyze_loop_form_1 (loop->inner, inner_loop_cond, |
| &inner_assumptions, &inner_niterm1, |
| &inner_niter, NULL); |
| if (!res) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: Bad inner loop.\n"); |
| return res; |
| } |
| |
| /* Don't support analyzing niter under assumptions for inner |
| loop. */ |
| if (!integer_onep (inner_assumptions)) |
| return opt_result::failure_at (vect_location, |
| "not vectorized: Bad inner loop.\n"); |
| |
| if (!expr_invariant_in_loop_p (loop, inner_niter)) |
| return opt_result::failure_at (vect_location, |
| "not vectorized: inner-loop count not" |
| " invariant.\n"); |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Considering outer-loop vectorization.\n"); |
| } |
| |
| if (!single_exit (loop)) |
| return opt_result::failure_at (vect_location, |
| "not vectorized: multiple exits.\n"); |
| if (EDGE_COUNT (loop->header->preds) != 2) |
| return opt_result::failure_at (vect_location, |
| "not vectorized:" |
| " too many incoming edges.\n"); |
| |
| /* We assume that the loop exit condition is at the end of the loop. i.e, |
| that the loop is represented as a do-while (with a proper if-guard |
| before the loop if needed), where the loop header contains all the |
| executable statements, and the latch is empty. */ |
| if (!empty_block_p (loop->latch) |
| || !gimple_seq_empty_p (phi_nodes (loop->latch))) |
| return opt_result::failure_at (vect_location, |
| "not vectorized: latch block not empty.\n"); |
| |
| /* Make sure the exit is not abnormal. */ |
| edge e = single_exit (loop); |
| if (e->flags & EDGE_ABNORMAL) |
| return opt_result::failure_at (vect_location, |
| "not vectorized:" |
| " abnormal loop exit edge.\n"); |
| |
| *loop_cond = vect_get_loop_niters (loop, assumptions, number_of_iterations, |
| number_of_iterationsm1); |
| if (!*loop_cond) |
| return opt_result::failure_at |
| (vect_location, |
| "not vectorized: complicated exit condition.\n"); |
| |
| if (integer_zerop (*assumptions) |
| || !*number_of_iterations |
| || chrec_contains_undetermined (*number_of_iterations)) |
| return opt_result::failure_at |
| (*loop_cond, |
| "not vectorized: number of iterations cannot be computed.\n"); |
| |
| if (integer_zerop (*number_of_iterations)) |
| return opt_result::failure_at |
| (*loop_cond, |
| "not vectorized: number of iterations = 0.\n"); |
| |
| return opt_result::success (); |
| } |
| |
| /* Analyze LOOP form and return a loop_vec_info if it is of suitable form. */ |
| |
| opt_loop_vec_info |
| vect_analyze_loop_form (struct loop *loop, vec_info_shared *shared) |
| { |
| tree assumptions, number_of_iterations, number_of_iterationsm1; |
| gcond *loop_cond, *inner_loop_cond = NULL; |
| |
| opt_result res |
| = vect_analyze_loop_form_1 (loop, &loop_cond, |
| &assumptions, &number_of_iterationsm1, |
| &number_of_iterations, &inner_loop_cond); |
| if (!res) |
| return opt_loop_vec_info::propagate_failure (res); |
| |
| loop_vec_info loop_vinfo = new _loop_vec_info (loop, shared); |
| LOOP_VINFO_NITERSM1 (loop_vinfo) = number_of_iterationsm1; |
| LOOP_VINFO_NITERS (loop_vinfo) = number_of_iterations; |
| LOOP_VINFO_NITERS_UNCHANGED (loop_vinfo) = number_of_iterations; |
| if (!integer_onep (assumptions)) |
| { |
| /* We consider to vectorize this loop by versioning it under |
| some assumptions. In order to do this, we need to clear |
| existing information computed by scev and niter analyzer. */ |
| scev_reset_htab (); |
| free_numbers_of_iterations_estimates (loop); |
| /* Also set flag for this loop so that following scev and niter |
| analysis are done under the assumptions. */ |
| loop_constraint_set (loop, LOOP_C_FINITE); |
| /* Also record the assumptions for versioning. */ |
| LOOP_VINFO_NITERS_ASSUMPTIONS (loop_vinfo) = assumptions; |
| } |
| |
| if (!LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo)) |
| { |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Symbolic number of iterations is "); |
| dump_generic_expr (MSG_NOTE, TDF_DETAILS, number_of_iterations); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| } |
| |
| stmt_vec_info loop_cond_info = loop_vinfo->lookup_stmt (loop_cond); |
| STMT_VINFO_TYPE (loop_cond_info) = loop_exit_ctrl_vec_info_type; |
| if (inner_loop_cond) |
| { |
| stmt_vec_info inner_loop_cond_info |
| = loop_vinfo->lookup_stmt (inner_loop_cond); |
| STMT_VINFO_TYPE (inner_loop_cond_info) = loop_exit_ctrl_vec_info_type; |
| } |
| |
| gcc_assert (!loop->aux); |
| loop->aux = loop_vinfo; |
| return opt_loop_vec_info::success (loop_vinfo); |
| } |
| |
| |
| |
| /* Scan the loop stmts and dependent on whether there are any (non-)SLP |
| statements update the vectorization factor. */ |
| |
| static void |
| vect_update_vf_for_slp (loop_vec_info loop_vinfo) |
| { |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| basic_block *bbs = LOOP_VINFO_BBS (loop_vinfo); |
| int nbbs = loop->num_nodes; |
| poly_uint64 vectorization_factor; |
| int i; |
| |
| DUMP_VECT_SCOPE ("vect_update_vf_for_slp"); |
| |
| vectorization_factor = LOOP_VINFO_VECT_FACTOR (loop_vinfo); |
| gcc_assert (known_ne (vectorization_factor, 0U)); |
| |
| /* If all the stmts in the loop can be SLPed, we perform only SLP, and |
| vectorization factor of the loop is the unrolling factor required by |
| the SLP instances. If that unrolling factor is 1, we say, that we |
| perform pure SLP on loop - cross iteration parallelism is not |
| exploited. */ |
| bool only_slp_in_loop = true; |
| for (i = 0; i < nbbs; i++) |
| { |
| basic_block bb = bbs[i]; |
| for (gimple_stmt_iterator si = gsi_start_bb (bb); !gsi_end_p (si); |
| gsi_next (&si)) |
| { |
| stmt_vec_info stmt_info = loop_vinfo->lookup_stmt (gsi_stmt (si)); |
| stmt_info = vect_stmt_to_vectorize (stmt_info); |
| if ((STMT_VINFO_RELEVANT_P (stmt_info) |
| || VECTORIZABLE_CYCLE_DEF (STMT_VINFO_DEF_TYPE (stmt_info))) |
| && !PURE_SLP_STMT (stmt_info)) |
| /* STMT needs both SLP and loop-based vectorization. */ |
| only_slp_in_loop = false; |
| } |
| } |
| |
| if (only_slp_in_loop) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Loop contains only SLP stmts\n"); |
| vectorization_factor = LOOP_VINFO_SLP_UNROLLING_FACTOR (loop_vinfo); |
| } |
| else |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Loop contains SLP and non-SLP stmts\n"); |
| /* Both the vectorization factor and unroll factor have the form |
| current_vector_size * X for some rational X, so they must have |
| a common multiple. */ |
| vectorization_factor |
| = force_common_multiple (vectorization_factor, |
| LOOP_VINFO_SLP_UNROLLING_FACTOR (loop_vinfo)); |
| } |
| |
| LOOP_VINFO_VECT_FACTOR (loop_vinfo) = vectorization_factor; |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Updating vectorization factor to "); |
| dump_dec (MSG_NOTE, vectorization_factor); |
| dump_printf (MSG_NOTE, ".\n"); |
| } |
| } |
| |
| /* Return true if STMT_INFO describes a double reduction phi and if |
| the other phi in the reduction is also relevant for vectorization. |
| This rejects cases such as: |
| |
| outer1: |
| x_1 = PHI <x_3(outer2), ...>; |
| ... |
| |
| inner: |
| x_2 = ...; |
| ... |
| |
| outer2: |
| x_3 = PHI <x_2(inner)>; |
| |
| if nothing in x_2 or elsewhere makes x_1 relevant. */ |
| |
| static bool |
| vect_active_double_reduction_p (stmt_vec_info stmt_info) |
| { |
| if (STMT_VINFO_DEF_TYPE (stmt_info) != vect_double_reduction_def) |
| return false; |
| |
| return STMT_VINFO_RELEVANT_P (STMT_VINFO_REDUC_DEF (stmt_info)); |
| } |
| |
| /* Function vect_analyze_loop_operations. |
| |
| Scan the loop stmts and make sure they are all vectorizable. */ |
| |
| static opt_result |
| vect_analyze_loop_operations (loop_vec_info loop_vinfo) |
| { |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| basic_block *bbs = LOOP_VINFO_BBS (loop_vinfo); |
| int nbbs = loop->num_nodes; |
| int i; |
| stmt_vec_info stmt_info; |
| bool need_to_vectorize = false; |
| bool ok; |
| |
| DUMP_VECT_SCOPE ("vect_analyze_loop_operations"); |
| |
| auto_vec<stmt_info_for_cost> cost_vec; |
| |
| for (i = 0; i < nbbs; i++) |
| { |
| basic_block bb = bbs[i]; |
| |
| for (gphi_iterator si = gsi_start_phis (bb); !gsi_end_p (si); |
| gsi_next (&si)) |
| { |
| gphi *phi = si.phi (); |
| ok = true; |
| |
| stmt_info = loop_vinfo->lookup_stmt (phi); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "examining phi: %G", phi); |
| if (virtual_operand_p (gimple_phi_result (phi))) |
| continue; |
| |
| /* Inner-loop loop-closed exit phi in outer-loop vectorization |
| (i.e., a phi in the tail of the outer-loop). */ |
| if (! is_loop_header_bb_p (bb)) |
| { |
| /* FORNOW: we currently don't support the case that these phis |
| are not used in the outerloop (unless it is double reduction, |
| i.e., this phi is vect_reduction_def), cause this case |
| requires to actually do something here. */ |
| if (STMT_VINFO_LIVE_P (stmt_info) |
| && !vect_active_double_reduction_p (stmt_info)) |
| return opt_result::failure_at (phi, |
| "Unsupported loop-closed phi" |
| " in outer-loop.\n"); |
| |
| /* If PHI is used in the outer loop, we check that its operand |
| is defined in the inner loop. */ |
| if (STMT_VINFO_RELEVANT_P (stmt_info)) |
| { |
| tree phi_op; |
| |
| if (gimple_phi_num_args (phi) != 1) |
| return opt_result::failure_at (phi, "unsupported phi"); |
| |
| phi_op = PHI_ARG_DEF (phi, 0); |
| stmt_vec_info op_def_info = loop_vinfo->lookup_def (phi_op); |
| if (!op_def_info) |
| return opt_result::failure_at (phi, "unsupported phi"); |
| |
| if (STMT_VINFO_RELEVANT (op_def_info) != vect_used_in_outer |
| && (STMT_VINFO_RELEVANT (op_def_info) |
| != vect_used_in_outer_by_reduction)) |
| return opt_result::failure_at (phi, "unsupported phi"); |
| } |
| |
| continue; |
| } |
| |
| gcc_assert (stmt_info); |
| |
| if ((STMT_VINFO_RELEVANT (stmt_info) == vect_used_in_scope |
| || STMT_VINFO_LIVE_P (stmt_info)) |
| && STMT_VINFO_DEF_TYPE (stmt_info) != vect_induction_def) |
| /* A scalar-dependence cycle that we don't support. */ |
| return opt_result::failure_at (phi, |
| "not vectorized:" |
| " scalar dependence cycle.\n"); |
| |
| if (STMT_VINFO_RELEVANT_P (stmt_info)) |
| { |
| need_to_vectorize = true; |
| if (STMT_VINFO_DEF_TYPE (stmt_info) == vect_induction_def |
| && ! PURE_SLP_STMT (stmt_info)) |
| ok = vectorizable_induction (stmt_info, NULL, NULL, NULL, |
| &cost_vec); |
| else if ((STMT_VINFO_DEF_TYPE (stmt_info) == vect_reduction_def |
| || STMT_VINFO_DEF_TYPE (stmt_info) == vect_nested_cycle) |
| && ! PURE_SLP_STMT (stmt_info)) |
| ok = vectorizable_reduction (stmt_info, NULL, NULL, NULL, NULL, |
| &cost_vec); |
| } |
| |
| /* SLP PHIs are tested by vect_slp_analyze_node_operations. */ |
| if (ok |
| && STMT_VINFO_LIVE_P (stmt_info) |
| && !PURE_SLP_STMT (stmt_info)) |
| ok = vectorizable_live_operation (stmt_info, NULL, NULL, -1, NULL, |
| &cost_vec); |
| |
| if (!ok) |
| return opt_result::failure_at (phi, |
| "not vectorized: relevant phi not " |
| "supported: %G", |
| static_cast <gimple *> (phi)); |
| } |
| |
| for (gimple_stmt_iterator si = gsi_start_bb (bb); !gsi_end_p (si); |
| gsi_next (&si)) |
| { |
| gimple *stmt = gsi_stmt (si); |
| if (!gimple_clobber_p (stmt)) |
| { |
| opt_result res |
| = vect_analyze_stmt (loop_vinfo->lookup_stmt (stmt), |
| &need_to_vectorize, |
| NULL, NULL, &cost_vec); |
| if (!res) |
| return res; |
| } |
| } |
| } /* bbs */ |
| |
| add_stmt_costs (loop_vinfo->target_cost_data, &cost_vec); |
| |
| /* All operations in the loop are either irrelevant (deal with loop |
| control, or dead), or only used outside the loop and can be moved |
| out of the loop (e.g. invariants, inductions). The loop can be |
| optimized away by scalar optimizations. We're better off not |
| touching this loop. */ |
| if (!need_to_vectorize) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "All the computation can be taken out of the loop.\n"); |
| return opt_result::failure_at |
| (vect_location, |
| "not vectorized: redundant loop. no profit to vectorize.\n"); |
| } |
| |
| return opt_result::success (); |
| } |
| |
| /* Analyze the cost of the loop described by LOOP_VINFO. Decide if it |
| is worthwhile to vectorize. Return 1 if definitely yes, 0 if |
| definitely no, or -1 if it's worth retrying. */ |
| |
| static int |
| vect_analyze_loop_costing (loop_vec_info loop_vinfo) |
| { |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| unsigned int assumed_vf = vect_vf_for_cost (loop_vinfo); |
| |
| /* Only fully-masked loops can have iteration counts less than the |
| vectorization factor. */ |
| if (!LOOP_VINFO_FULLY_MASKED_P (loop_vinfo)) |
| { |
| HOST_WIDE_INT max_niter; |
| |
| if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo)) |
| max_niter = LOOP_VINFO_INT_NITERS (loop_vinfo); |
| else |
| max_niter = max_stmt_executions_int (loop); |
| |
| if (max_niter != -1 |
| && (unsigned HOST_WIDE_INT) max_niter < assumed_vf) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: iteration count smaller than " |
| "vectorization factor.\n"); |
| return 0; |
| } |
| } |
| |
| int min_profitable_iters, min_profitable_estimate; |
| vect_estimate_min_profitable_iters (loop_vinfo, &min_profitable_iters, |
| &min_profitable_estimate); |
| |
| if (min_profitable_iters < 0) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: vectorization not profitable.\n"); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: vector version will never be " |
| "profitable.\n"); |
| return -1; |
| } |
| |
| int min_scalar_loop_bound = (PARAM_VALUE (PARAM_MIN_VECT_LOOP_BOUND) |
| * assumed_vf); |
| |
| /* Use the cost model only if it is more conservative than user specified |
| threshold. */ |
| unsigned int th = (unsigned) MAX (min_scalar_loop_bound, |
| min_profitable_iters); |
| |
| LOOP_VINFO_COST_MODEL_THRESHOLD (loop_vinfo) = th; |
| |
| if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo) |
| && LOOP_VINFO_INT_NITERS (loop_vinfo) < th) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: vectorization not profitable.\n"); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "not vectorized: iteration count smaller than user " |
| "specified loop bound parameter or minimum profitable " |
| "iterations (whichever is more conservative).\n"); |
| return 0; |
| } |
| |
| HOST_WIDE_INT estimated_niter = estimated_stmt_executions_int (loop); |
| if (estimated_niter == -1) |
| estimated_niter = likely_max_stmt_executions_int (loop); |
| if (estimated_niter != -1 |
| && ((unsigned HOST_WIDE_INT) estimated_niter |
| < MAX (th, (unsigned) min_profitable_estimate))) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: estimated iteration count too " |
| "small.\n"); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "not vectorized: estimated iteration count smaller " |
| "than specified loop bound parameter or minimum " |
| "profitable iterations (whichever is more " |
| "conservative).\n"); |
| return -1; |
| } |
| |
| return 1; |
| } |
| |
| static opt_result |
| vect_get_datarefs_in_loop (loop_p loop, basic_block *bbs, |
| vec<data_reference_p> *datarefs, |
| unsigned int *n_stmts) |
| { |
| *n_stmts = 0; |
| for (unsigned i = 0; i < loop->num_nodes; i++) |
| for (gimple_stmt_iterator gsi = gsi_start_bb (bbs[i]); |
| !gsi_end_p (gsi); gsi_next (&gsi)) |
| { |
| gimple *stmt = gsi_stmt (gsi); |
| if (is_gimple_debug (stmt)) |
| continue; |
| ++(*n_stmts); |
| opt_result res = vect_find_stmt_data_reference (loop, stmt, datarefs); |
| if (!res) |
| { |
| if (is_gimple_call (stmt) && loop->safelen) |
| { |
| tree fndecl = gimple_call_fndecl (stmt), op; |
| if (fndecl != NULL_TREE) |
| { |
| cgraph_node *node = cgraph_node::get (fndecl); |
| if (node != NULL && node->simd_clones != NULL) |
| { |
| unsigned int j, n = gimple_call_num_args (stmt); |
| for (j = 0; j < n; j++) |
| { |
| op = gimple_call_arg (stmt, j); |
| if (DECL_P (op) |
| || (REFERENCE_CLASS_P (op) |
| && get_base_address (op))) |
| break; |
| } |
| op = gimple_call_lhs (stmt); |
| /* Ignore #pragma omp declare simd functions |
| if they don't have data references in the |
| call stmt itself. */ |
| if (j == n |
| && !(op |
| && (DECL_P (op) |
| || (REFERENCE_CLASS_P (op) |
| && get_base_address (op))))) |
| continue; |
| } |
| } |
| } |
| return res; |
| } |
| /* If dependence analysis will give up due to the limit on the |
| number of datarefs stop here and fail fatally. */ |
| if (datarefs->length () |
| > (unsigned)PARAM_VALUE (PARAM_LOOP_MAX_DATAREFS_FOR_DATADEPS)) |
| return opt_result::failure_at (stmt, "exceeded param " |
| "loop-max-datarefs-for-datadeps\n"); |
| } |
| return opt_result::success (); |
| } |
| |
| /* Look for SLP-only access groups and turn each individual access into its own |
| group. */ |
| static void |
| vect_dissolve_slp_only_groups (loop_vec_info loop_vinfo) |
| { |
| unsigned int i; |
| struct data_reference *dr; |
| |
| DUMP_VECT_SCOPE ("vect_dissolve_slp_only_groups"); |
| |
| vec<data_reference_p> datarefs = loop_vinfo->shared->datarefs; |
| FOR_EACH_VEC_ELT (datarefs, i, dr) |
| { |
| gcc_assert (DR_REF (dr)); |
| stmt_vec_info stmt_info = loop_vinfo->lookup_stmt (DR_STMT (dr)); |
| |
| /* Check if the load is a part of an interleaving chain. */ |
| if (STMT_VINFO_GROUPED_ACCESS (stmt_info)) |
| { |
| stmt_vec_info first_element = DR_GROUP_FIRST_ELEMENT (stmt_info); |
| unsigned int group_size = DR_GROUP_SIZE (first_element); |
| |
| /* Check if SLP-only groups. */ |
| if (!STMT_SLP_TYPE (stmt_info) |
| && STMT_VINFO_SLP_VECT_ONLY (first_element)) |
| { |
| /* Dissolve the group. */ |
| STMT_VINFO_SLP_VECT_ONLY (first_element) = false; |
| |
| stmt_vec_info vinfo = first_element; |
| while (vinfo) |
| { |
| stmt_vec_info next = DR_GROUP_NEXT_ELEMENT (vinfo); |
| DR_GROUP_FIRST_ELEMENT (vinfo) = vinfo; |
| DR_GROUP_NEXT_ELEMENT (vinfo) = NULL; |
| DR_GROUP_SIZE (vinfo) = 1; |
| DR_GROUP_GAP (vinfo) = group_size - 1; |
| vinfo = next; |
| } |
| } |
| } |
| } |
| } |
| |
| /* Function vect_analyze_loop_2. |
| |
| Apply a set of analyses on LOOP, and create a loop_vec_info struct |
| for it. The different analyses will record information in the |
| loop_vec_info struct. */ |
| static opt_result |
| vect_analyze_loop_2 (loop_vec_info loop_vinfo, bool &fatal, unsigned *n_stmts) |
| { |
| opt_result ok = opt_result::success (); |
| int res; |
| unsigned int max_vf = MAX_VECTORIZATION_FACTOR; |
| poly_uint64 min_vf = 2; |
| |
| /* The first group of checks is independent of the vector size. */ |
| fatal = true; |
| |
| if (LOOP_VINFO_SIMD_IF_COND (loop_vinfo) |
| && integer_zerop (LOOP_VINFO_SIMD_IF_COND (loop_vinfo))) |
| return opt_result::failure_at (vect_location, |
| "not vectorized: simd if(0)\n"); |
| |
| /* Find all data references in the loop (which correspond to vdefs/vuses) |
| and analyze their evolution in the loop. */ |
| |
| loop_p loop = LOOP_VINFO_LOOP (loop_vinfo); |
| |
| /* Gather the data references and count stmts in the loop. */ |
| if (!LOOP_VINFO_DATAREFS (loop_vinfo).exists ()) |
| { |
| opt_result res |
| = vect_get_datarefs_in_loop (loop, LOOP_VINFO_BBS (loop_vinfo), |
| &LOOP_VINFO_DATAREFS (loop_vinfo), |
| n_stmts); |
| if (!res) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: loop contains function " |
| "calls or data references that cannot " |
| "be analyzed\n"); |
| return res; |
| } |
| loop_vinfo->shared->save_datarefs (); |
| } |
| else |
| loop_vinfo->shared->check_datarefs (); |
| |
| /* Analyze the data references and also adjust the minimal |
| vectorization factor according to the loads and stores. */ |
| |
| ok = vect_analyze_data_refs (loop_vinfo, &min_vf); |
| if (!ok) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "bad data references.\n"); |
| return ok; |
| } |
| |
| /* Classify all cross-iteration scalar data-flow cycles. |
| Cross-iteration cycles caused by virtual phis are analyzed separately. */ |
| vect_analyze_scalar_cycles (loop_vinfo); |
| |
| vect_pattern_recog (loop_vinfo); |
| |
| vect_fixup_scalar_cycles_with_patterns (loop_vinfo); |
| |
| /* Analyze the access patterns of the data-refs in the loop (consecutive, |
| complex, etc.). FORNOW: Only handle consecutive access pattern. */ |
| |
| ok = vect_analyze_data_ref_accesses (loop_vinfo); |
| if (!ok) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "bad data access.\n"); |
| return ok; |
| } |
| |
| /* Data-flow analysis to detect stmts that do not need to be vectorized. */ |
| |
| ok = vect_mark_stmts_to_be_vectorized (loop_vinfo); |
| if (!ok) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "unexpected pattern.\n"); |
| return ok; |
| } |
| |
| /* While the rest of the analysis below depends on it in some way. */ |
| fatal = false; |
| |
| /* Analyze data dependences between the data-refs in the loop |
| and adjust the maximum vectorization factor according to |
| the dependences. |
| FORNOW: fail at the first data dependence that we encounter. */ |
| |
| ok = vect_analyze_data_ref_dependences (loop_vinfo, &max_vf); |
| if (!ok) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "bad data dependence.\n"); |
| return ok; |
| } |
| if (max_vf != MAX_VECTORIZATION_FACTOR |
| && maybe_lt (max_vf, min_vf)) |
| return opt_result::failure_at (vect_location, "bad data dependence.\n"); |
| LOOP_VINFO_MAX_VECT_FACTOR (loop_vinfo) = max_vf; |
| |
| ok = vect_determine_vectorization_factor (loop_vinfo); |
| if (!ok) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "can't determine vectorization factor.\n"); |
| return ok; |
| } |
| if (max_vf != MAX_VECTORIZATION_FACTOR |
| && maybe_lt (max_vf, LOOP_VINFO_VECT_FACTOR (loop_vinfo))) |
| return opt_result::failure_at (vect_location, "bad data dependence.\n"); |
| |
| /* Compute the scalar iteration cost. */ |
| vect_compute_single_scalar_iteration_cost (loop_vinfo); |
| |
| poly_uint64 saved_vectorization_factor = LOOP_VINFO_VECT_FACTOR (loop_vinfo); |
| unsigned th; |
| |
| /* Check the SLP opportunities in the loop, analyze and build SLP trees. */ |
| ok = vect_analyze_slp (loop_vinfo, *n_stmts); |
| if (!ok) |
| return ok; |
| |
| /* If there are any SLP instances mark them as pure_slp. */ |
| bool slp = vect_make_slp_decision (loop_vinfo); |
| if (slp) |
| { |
| /* Find stmts that need to be both vectorized and SLPed. */ |
| vect_detect_hybrid_slp (loop_vinfo); |
| |
| /* Update the vectorization factor based on the SLP decision. */ |
| vect_update_vf_for_slp (loop_vinfo); |
| } |
| |
| bool saved_can_fully_mask_p = LOOP_VINFO_CAN_FULLY_MASK_P (loop_vinfo); |
| |
| /* We don't expect to have to roll back to anything other than an empty |
| set of rgroups. */ |
| gcc_assert (LOOP_VINFO_MASKS (loop_vinfo).is_empty ()); |
| |
| /* This is the point where we can re-start analysis with SLP forced off. */ |
| start_over: |
| |
| /* Now the vectorization factor is final. */ |
| poly_uint64 vectorization_factor = LOOP_VINFO_VECT_FACTOR (loop_vinfo); |
| gcc_assert (known_ne (vectorization_factor, 0U)); |
| |
| if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo) && dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "vectorization_factor = "); |
| dump_dec (MSG_NOTE, vectorization_factor); |
| dump_printf (MSG_NOTE, ", niters = %wd\n", |
| LOOP_VINFO_INT_NITERS (loop_vinfo)); |
| } |
| |
| HOST_WIDE_INT max_niter |
| = likely_max_stmt_executions_int (LOOP_VINFO_LOOP (loop_vinfo)); |
| |
| /* Analyze the alignment of the data-refs in the loop. |
| Fail if a data reference is found that cannot be vectorized. */ |
| |
| ok = vect_analyze_data_refs_alignment (loop_vinfo); |
| if (!ok) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "bad data alignment.\n"); |
| return ok; |
| } |
| |
| /* Prune the list of ddrs to be tested at run-time by versioning for alias. |
| It is important to call pruning after vect_analyze_data_ref_accesses, |
| since we use grouping information gathered by interleaving analysis. */ |
| ok = vect_prune_runtime_alias_test_list (loop_vinfo); |
| if (!ok) |
| return ok; |
| |
| /* Do not invoke vect_enhance_data_refs_alignment for epilogue |
| vectorization, since we do not want to add extra peeling or |
| add versioning for alignment. */ |
| if (!LOOP_VINFO_EPILOGUE_P (loop_vinfo)) |
| /* This pass will decide on using loop versioning and/or loop peeling in |
| order to enhance the alignment of data references in the loop. */ |
| ok = vect_enhance_data_refs_alignment (loop_vinfo); |
| else |
| ok = vect_verify_datarefs_alignment (loop_vinfo); |
| if (!ok) |
| return ok; |
| |
| if (slp) |
| { |
| /* Analyze operations in the SLP instances. Note this may |
| remove unsupported SLP instances which makes the above |
| SLP kind detection invalid. */ |
| unsigned old_size = LOOP_VINFO_SLP_INSTANCES (loop_vinfo).length (); |
| vect_slp_analyze_operations (loop_vinfo); |
| if (LOOP_VINFO_SLP_INSTANCES (loop_vinfo).length () != old_size) |
| { |
| ok = opt_result::failure_at (vect_location, |
| "unsupported SLP instances\n"); |
| goto again; |
| } |
| } |
| |
| /* Dissolve SLP-only groups. */ |
| vect_dissolve_slp_only_groups (loop_vinfo); |
| |
| /* Scan all the remaining operations in the loop that are not subject |
| to SLP and make sure they are vectorizable. */ |
| ok = vect_analyze_loop_operations (loop_vinfo); |
| if (!ok) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "bad operation or unsupported loop bound.\n"); |
| return ok; |
| } |
| |
| /* Decide whether to use a fully-masked loop for this vectorization |
| factor. */ |
| LOOP_VINFO_FULLY_MASKED_P (loop_vinfo) |
| = (LOOP_VINFO_CAN_FULLY_MASK_P (loop_vinfo) |
| && vect_verify_full_masking (loop_vinfo)); |
| if (dump_enabled_p ()) |
| { |
| if (LOOP_VINFO_FULLY_MASKED_P (loop_vinfo)) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "using a fully-masked loop.\n"); |
| else |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "not using a fully-masked loop.\n"); |
| } |
| |
| /* If epilog loop is required because of data accesses with gaps, |
| one additional iteration needs to be peeled. Check if there is |
| enough iterations for vectorization. */ |
| if (LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo) |
| && LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo) |
| && !LOOP_VINFO_FULLY_MASKED_P (loop_vinfo)) |
| { |
| poly_uint64 vf = LOOP_VINFO_VECT_FACTOR (loop_vinfo); |
| tree scalar_niters = LOOP_VINFO_NITERSM1 (loop_vinfo); |
| |
| if (known_lt (wi::to_widest (scalar_niters), vf)) |
| return opt_result::failure_at (vect_location, |
| "loop has no enough iterations to" |
| " support peeling for gaps.\n"); |
| } |
| |
| /* Check the costings of the loop make vectorizing worthwhile. */ |
| res = vect_analyze_loop_costing (loop_vinfo); |
| if (res < 0) |
| { |
| ok = opt_result::failure_at (vect_location, |
| "Loop costings may not be worthwhile.\n"); |
| goto again; |
| } |
| if (!res) |
| return opt_result::failure_at (vect_location, |
| "Loop costings not worthwhile.\n"); |
| |
| /* Decide whether we need to create an epilogue loop to handle |
| remaining scalar iterations. */ |
| th = LOOP_VINFO_COST_MODEL_THRESHOLD (loop_vinfo); |
| |
| unsigned HOST_WIDE_INT const_vf; |
| if (LOOP_VINFO_FULLY_MASKED_P (loop_vinfo)) |
| /* The main loop handles all iterations. */ |
| LOOP_VINFO_PEELING_FOR_NITER (loop_vinfo) = false; |
| else if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo) |
| && LOOP_VINFO_PEELING_FOR_ALIGNMENT (loop_vinfo) >= 0) |
| { |
| /* Work out the (constant) number of iterations that need to be |
| peeled for reasons other than niters. */ |
| unsigned int peel_niter = LOOP_VINFO_PEELING_FOR_ALIGNMENT (loop_vinfo); |
| if (LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo)) |
| peel_niter += 1; |
| if (!multiple_p (LOOP_VINFO_INT_NITERS (loop_vinfo) - peel_niter, |
| LOOP_VINFO_VECT_FACTOR (loop_vinfo))) |
| LOOP_VINFO_PEELING_FOR_NITER (loop_vinfo) = true; |
| } |
| else if (LOOP_VINFO_PEELING_FOR_ALIGNMENT (loop_vinfo) |
| /* ??? When peeling for gaps but not alignment, we could |
| try to check whether the (variable) niters is known to be |
| VF * N + 1. That's something of a niche case though. */ |
| || LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo) |
| || !LOOP_VINFO_VECT_FACTOR (loop_vinfo).is_constant (&const_vf) |
| || ((tree_ctz (LOOP_VINFO_NITERS (loop_vinfo)) |
| < (unsigned) exact_log2 (const_vf)) |
| /* In case of versioning, check if the maximum number of |
| iterations is greater than th. If they are identical, |
| the epilogue is unnecessary. */ |
| && (!LOOP_REQUIRES_VERSIONING (loop_vinfo) |
| || ((unsigned HOST_WIDE_INT) max_niter |
| > (th / const_vf) * const_vf)))) |
| LOOP_VINFO_PEELING_FOR_NITER (loop_vinfo) = true; |
| |
| /* If an epilogue loop is required make sure we can create one. */ |
| if (LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo) |
| || LOOP_VINFO_PEELING_FOR_NITER (loop_vinfo)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "epilog loop required\n"); |
| if (!vect_can_advance_ivs_p (loop_vinfo) |
| || !slpeel_can_duplicate_loop_p (LOOP_VINFO_LOOP (loop_vinfo), |
| single_exit (LOOP_VINFO_LOOP |
| (loop_vinfo)))) |
| { |
| ok = opt_result::failure_at (vect_location, |
| "not vectorized: can't create required " |
| "epilog loop\n"); |
| goto again; |
| } |
| } |
| |
| /* During peeling, we need to check if number of loop iterations is |
| enough for both peeled prolog loop and vector loop. This check |
| can be merged along with threshold check of loop versioning, so |
| increase threshold for this case if necessary. */ |
| if (LOOP_REQUIRES_VERSIONING (loop_vinfo)) |
| { |
| poly_uint64 niters_th = 0; |
| |
| if (!vect_use_loop_mask_for_alignment_p (loop_vinfo)) |
| { |
| /* Niters for peeled prolog loop. */ |
| if (LOOP_VINFO_PEELING_FOR_ALIGNMENT (loop_vinfo) < 0) |
| { |
| dr_vec_info *dr_info = LOOP_VINFO_UNALIGNED_DR (loop_vinfo); |
| tree vectype = STMT_VINFO_VECTYPE (dr_info->stmt); |
| niters_th += TYPE_VECTOR_SUBPARTS (vectype) - 1; |
| } |
| else |
| niters_th += LOOP_VINFO_PEELING_FOR_ALIGNMENT (loop_vinfo); |
| } |
| |
| /* Niters for at least one iteration of vectorized loop. */ |
| if (!LOOP_VINFO_FULLY_MASKED_P (loop_vinfo)) |
| niters_th += LOOP_VINFO_VECT_FACTOR (loop_vinfo); |
| /* One additional iteration because of peeling for gap. */ |
| if (LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo)) |
| niters_th += 1; |
| LOOP_VINFO_VERSIONING_THRESHOLD (loop_vinfo) = niters_th; |
| } |
| |
| gcc_assert (known_eq (vectorization_factor, |
| LOOP_VINFO_VECT_FACTOR (loop_vinfo))); |
| |
| /* Ok to vectorize! */ |
| return opt_result::success (); |
| |
| again: |
| /* Ensure that "ok" is false (with an opt_problem if dumping is enabled). */ |
| gcc_assert (!ok); |
| |
| /* Try again with SLP forced off but if we didn't do any SLP there is |
| no point in re-trying. */ |
| if (!slp) |
| return ok; |
| |
| /* If there are reduction chains re-trying will fail anyway. */ |
| if (! LOOP_VINFO_REDUCTION_CHAINS (loop_vinfo).is_empty ()) |
| return ok; |
| |
| /* Likewise if the grouped loads or stores in the SLP cannot be handled |
| via interleaving or lane instructions. */ |
| slp_instance instance; |
| slp_tree node; |
| unsigned i, j; |
| FOR_EACH_VEC_ELT (LOOP_VINFO_SLP_INSTANCES (loop_vinfo), i, instance) |
| { |
| stmt_vec_info vinfo; |
| vinfo = SLP_TREE_SCALAR_STMTS (SLP_INSTANCE_TREE (instance))[0]; |
| if (! STMT_VINFO_GROUPED_ACCESS (vinfo)) |
| continue; |
| vinfo = DR_GROUP_FIRST_ELEMENT (vinfo); |
| unsigned int size = DR_GROUP_SIZE (vinfo); |
| tree vectype = STMT_VINFO_VECTYPE (vinfo); |
| if (! vect_store_lanes_supported (vectype, size, false) |
| && ! known_eq (TYPE_VECTOR_SUBPARTS (vectype), 1U) |
| && ! vect_grouped_store_supported (vectype, size)) |
| return opt_result::failure_at (vinfo->stmt, |
| "unsupported grouped store\n"); |
| FOR_EACH_VEC_ELT (SLP_INSTANCE_LOADS (instance), j, node) |
| { |
| vinfo = SLP_TREE_SCALAR_STMTS (node)[0]; |
| vinfo = DR_GROUP_FIRST_ELEMENT (vinfo); |
| bool single_element_p = !DR_GROUP_NEXT_ELEMENT (vinfo); |
| size = DR_GROUP_SIZE (vinfo); |
| vectype = STMT_VINFO_VECTYPE (vinfo); |
| if (! vect_load_lanes_supported (vectype, size, false) |
| && ! vect_grouped_load_supported (vectype, single_element_p, |
| size)) |
| return opt_result::failure_at (vinfo->stmt, |
| "unsupported grouped load\n"); |
| } |
| } |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "re-trying with SLP disabled\n"); |
| |
| /* Roll back state appropriately. No SLP this time. */ |
| slp = false; |
| /* Restore vectorization factor as it were without SLP. */ |
| LOOP_VINFO_VECT_FACTOR (loop_vinfo) = saved_vectorization_factor; |
| /* Free the SLP instances. */ |
| FOR_EACH_VEC_ELT (LOOP_VINFO_SLP_INSTANCES (loop_vinfo), j, instance) |
| vect_free_slp_instance (instance, false); |
| LOOP_VINFO_SLP_INSTANCES (loop_vinfo).release (); |
| /* Reset SLP type to loop_vect on all stmts. */ |
| for (i = 0; i < LOOP_VINFO_LOOP (loop_vinfo)->num_nodes; ++i) |
| { |
| basic_block bb = LOOP_VINFO_BBS (loop_vinfo)[i]; |
| for (gimple_stmt_iterator si = gsi_start_phis (bb); |
| !gsi_end_p (si); gsi_next (&si)) |
| { |
| stmt_vec_info stmt_info = loop_vinfo->lookup_stmt (gsi_stmt (si)); |
| STMT_SLP_TYPE (stmt_info) = loop_vect; |
| } |
| for (gimple_stmt_iterator si = gsi_start_bb (bb); |
| !gsi_end_p (si); gsi_next (&si)) |
| { |
| stmt_vec_info stmt_info = loop_vinfo->lookup_stmt (gsi_stmt (si)); |
| STMT_SLP_TYPE (stmt_info) = loop_vect; |
| if (STMT_VINFO_IN_PATTERN_P (stmt_info)) |
| { |
| gimple *pattern_def_seq = STMT_VINFO_PATTERN_DEF_SEQ (stmt_info); |
| stmt_info = STMT_VINFO_RELATED_STMT (stmt_info); |
| STMT_SLP_TYPE (stmt_info) = loop_vect; |
| for (gimple_stmt_iterator pi = gsi_start (pattern_def_seq); |
| !gsi_end_p (pi); gsi_next (&pi)) |
| STMT_SLP_TYPE (loop_vinfo->lookup_stmt (gsi_stmt (pi))) |
| = loop_vect; |
| } |
| } |
| } |
| /* Free optimized alias test DDRS. */ |
| LOOP_VINFO_LOWER_BOUNDS (loop_vinfo).truncate (0); |
| LOOP_VINFO_COMP_ALIAS_DDRS (loop_vinfo).release (); |
| LOOP_VINFO_CHECK_UNEQUAL_ADDRS (loop_vinfo).release (); |
| /* Reset target cost data. */ |
| destroy_cost_data (LOOP_VINFO_TARGET_COST_DATA (loop_vinfo)); |
| LOOP_VINFO_TARGET_COST_DATA (loop_vinfo) |
| = init_cost (LOOP_VINFO_LOOP (loop_vinfo)); |
| /* Reset accumulated rgroup information. */ |
| release_vec_loop_masks (&LOOP_VINFO_MASKS (loop_vinfo)); |
| /* Reset assorted flags. */ |
| LOOP_VINFO_PEELING_FOR_NITER (loop_vinfo) = false; |
| LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo) = false; |
| LOOP_VINFO_COST_MODEL_THRESHOLD (loop_vinfo) = 0; |
| LOOP_VINFO_VERSIONING_THRESHOLD (loop_vinfo) = 0; |
| LOOP_VINFO_CAN_FULLY_MASK_P (loop_vinfo) = saved_can_fully_mask_p; |
| |
| goto start_over; |
| } |
| |
| /* Function vect_analyze_loop. |
| |
| Apply a set of analyses on LOOP, and create a loop_vec_info struct |
| for it. The different analyses will record information in the |
| loop_vec_info struct. If ORIG_LOOP_VINFO is not NULL epilogue must |
| be vectorized. */ |
| opt_loop_vec_info |
| vect_analyze_loop (struct loop *loop, loop_vec_info orig_loop_vinfo, |
| vec_info_shared *shared) |
| { |
| auto_vector_sizes vector_sizes; |
| |
| /* Autodetect first vector size we try. */ |
| current_vector_size = 0; |
| targetm.vectorize.autovectorize_vector_sizes (&vector_sizes, |
| loop->simdlen != 0); |
| unsigned int next_size = 0; |
| |
| DUMP_VECT_SCOPE ("analyze_loop_nest"); |
| |
| if (loop_outer (loop) |
| && loop_vec_info_for_loop (loop_outer (loop)) |
| && LOOP_VINFO_VECTORIZABLE_P (loop_vec_info_for_loop (loop_outer (loop)))) |
| return opt_loop_vec_info::failure_at (vect_location, |
| "outer-loop already vectorized.\n"); |
| |
| if (!find_loop_nest (loop, &shared->loop_nest)) |
| return opt_loop_vec_info::failure_at |
| (vect_location, |
| "not vectorized: loop nest containing two or more consecutive inner" |
| " loops cannot be vectorized\n"); |
| |
| unsigned n_stmts = 0; |
| poly_uint64 autodetected_vector_size = 0; |
| opt_loop_vec_info first_loop_vinfo = opt_loop_vec_info::success (NULL); |
| poly_uint64 first_vector_size = 0; |
| while (1) |
| { |
| /* Check the CFG characteristics of the loop (nesting, entry/exit). */ |
| opt_loop_vec_info loop_vinfo |
| = vect_analyze_loop_form (loop, shared); |
| if (!loop_vinfo) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "bad loop form.\n"); |
| gcc_checking_assert (first_loop_vinfo == NULL); |
| return loop_vinfo; |
| } |
| |
| bool fatal = false; |
| |
| if (orig_loop_vinfo) |
| LOOP_VINFO_ORIG_LOOP_INFO (loop_vinfo) = orig_loop_vinfo; |
| |
| opt_result res = vect_analyze_loop_2 (loop_vinfo, fatal, &n_stmts); |
| if (res) |
| { |
| LOOP_VINFO_VECTORIZABLE_P (loop_vinfo) = 1; |
| |
| if (loop->simdlen |
| && maybe_ne (LOOP_VINFO_VECT_FACTOR (loop_vinfo), |
| (unsigned HOST_WIDE_INT) loop->simdlen)) |
| { |
| if (first_loop_vinfo == NULL) |
| { |
| first_loop_vinfo = loop_vinfo; |
| first_vector_size = current_vector_size; |
| loop->aux = NULL; |
| } |
| else |
| delete loop_vinfo; |
| } |
| else |
| { |
| delete first_loop_vinfo; |
| return loop_vinfo; |
| } |
| } |
| else |
| delete loop_vinfo; |
| |
| if (next_size == 0) |
| autodetected_vector_size = current_vector_size; |
| |
| if (next_size < vector_sizes.length () |
| && known_eq (vector_sizes[next_size], autodetected_vector_size)) |
| next_size += 1; |
| |
| if (fatal) |
| { |
| gcc_checking_assert (first_loop_vinfo == NULL); |
| return opt_loop_vec_info::propagate_failure (res); |
| } |
| |
| if (next_size == vector_sizes.length () |
| || known_eq (current_vector_size, 0U)) |
| { |
| if (first_loop_vinfo) |
| { |
| current_vector_size = first_vector_size; |
| loop->aux = (loop_vec_info) first_loop_vinfo; |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "***** Choosing vector size "); |
| dump_dec (MSG_NOTE, current_vector_size); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| return first_loop_vinfo; |
| } |
| else |
| return opt_loop_vec_info::propagate_failure (res); |
| } |
| |
| /* Try the next biggest vector size. */ |
| current_vector_size = vector_sizes[next_size++]; |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "***** Re-trying analysis with " |
| "vector size "); |
| dump_dec (MSG_NOTE, current_vector_size); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| } |
| } |
| |
| /* Return true if there is an in-order reduction function for CODE, storing |
| it in *REDUC_FN if so. */ |
| |
| static bool |
| fold_left_reduction_fn (tree_code code, internal_fn *reduc_fn) |
| { |
| switch (code) |
| { |
| case PLUS_EXPR: |
| *reduc_fn = IFN_FOLD_LEFT_PLUS; |
| return true; |
| |
| default: |
| return false; |
| } |
| } |
| |
| /* Function reduction_fn_for_scalar_code |
| |
| Input: |
| CODE - tree_code of a reduction operations. |
| |
| Output: |
| REDUC_FN - the corresponding internal function to be used to reduce the |
| vector of partial results into a single scalar result, or IFN_LAST |
| if the operation is a supported reduction operation, but does not have |
| such an internal function. |
| |
| Return FALSE if CODE currently cannot be vectorized as reduction. */ |
| |
| static bool |
| reduction_fn_for_scalar_code (enum tree_code code, internal_fn *reduc_fn) |
| { |
| switch (code) |
| { |
| case MAX_EXPR: |
| *reduc_fn = IFN_REDUC_MAX; |
| return true; |
| |
| case MIN_EXPR: |
| *reduc_fn = IFN_REDUC_MIN; |
| return true; |
| |
| case PLUS_EXPR: |
| *reduc_fn = IFN_REDUC_PLUS; |
| return true; |
| |
| case BIT_AND_EXPR: |
| *reduc_fn = IFN_REDUC_AND; |
| return true; |
| |
| case BIT_IOR_EXPR: |
| *reduc_fn = IFN_REDUC_IOR; |
| return true; |
| |
| case BIT_XOR_EXPR: |
| *reduc_fn = IFN_REDUC_XOR; |
| return true; |
| |
| case MULT_EXPR: |
| case MINUS_EXPR: |
| *reduc_fn = IFN_LAST; |
| return true; |
| |
| default: |
| return false; |
| } |
| } |
| |
| /* If there is a neutral value X such that SLP reduction NODE would not |
| be affected by the introduction of additional X elements, return that X, |
| otherwise return null. CODE is the code of the reduction. REDUC_CHAIN |
| is true if the SLP statements perform a single reduction, false if each |
| statement performs an independent reduction. */ |
| |
| static tree |
| neutral_op_for_slp_reduction (slp_tree slp_node, tree_code code, |
| bool reduc_chain) |
| { |
| vec<stmt_vec_info> stmts = SLP_TREE_SCALAR_STMTS (slp_node); |
| stmt_vec_info stmt_vinfo = stmts[0]; |
| tree vector_type = STMT_VINFO_VECTYPE (stmt_vinfo); |
| tree scalar_type = TREE_TYPE (vector_type); |
| struct loop *loop = gimple_bb (stmt_vinfo->stmt)->loop_father; |
| gcc_assert (loop); |
| |
| switch (code) |
| { |
| case WIDEN_SUM_EXPR: |
| case DOT_PROD_EXPR: |
| case SAD_EXPR: |
| case PLUS_EXPR: |
| case MINUS_EXPR: |
| case BIT_IOR_EXPR: |
| case BIT_XOR_EXPR: |
| return build_zero_cst (scalar_type); |
| |
| case MULT_EXPR: |
| return build_one_cst (scalar_type); |
| |
| case BIT_AND_EXPR: |
| return build_all_ones_cst (scalar_type); |
| |
| case MAX_EXPR: |
| case MIN_EXPR: |
| /* For MIN/MAX the initial values are neutral. A reduction chain |
| has only a single initial value, so that value is neutral for |
| all statements. */ |
| if (reduc_chain) |
| return PHI_ARG_DEF_FROM_EDGE (stmt_vinfo->stmt, |
| loop_preheader_edge (loop)); |
| return NULL_TREE; |
| |
| default: |
| return NULL_TREE; |
| } |
| } |
| |
| /* Error reporting helper for vect_is_simple_reduction below. GIMPLE statement |
| STMT is printed with a message MSG. */ |
| |
| static void |
| report_vect_op (dump_flags_t msg_type, gimple *stmt, const char *msg) |
| { |
| dump_printf_loc (msg_type, vect_location, "%s%G", msg, stmt); |
| } |
| |
| /* DEF_STMT_INFO occurs in a loop that contains a potential reduction |
| operation. Return true if the results of DEF_STMT_INFO are something |
| that can be accumulated by such a reduction. */ |
| |
| static bool |
| vect_valid_reduction_input_p (stmt_vec_info def_stmt_info) |
| { |
| return (is_gimple_assign (def_stmt_info->stmt) |
| || is_gimple_call (def_stmt_info->stmt) |
| || STMT_VINFO_DEF_TYPE (def_stmt_info) == vect_induction_def |
| || (gimple_code (def_stmt_info->stmt) == GIMPLE_PHI |
| && STMT_VINFO_DEF_TYPE (def_stmt_info) == vect_internal_def |
| && !is_loop_header_bb_p (gimple_bb (def_stmt_info->stmt)))); |
| } |
| |
| /* Detect SLP reduction of the form: |
| |
| #a1 = phi <a5, a0> |
| a2 = operation (a1) |
| a3 = operation (a2) |
| a4 = operation (a3) |
| a5 = operation (a4) |
| |
| #a = phi <a5> |
| |
| PHI is the reduction phi node (#a1 = phi <a5, a0> above) |
| FIRST_STMT is the first reduction stmt in the chain |
| (a2 = operation (a1)). |
| |
| Return TRUE if a reduction chain was detected. */ |
| |
| static bool |
| vect_is_slp_reduction (loop_vec_info loop_info, gimple *phi, |
| gimple *first_stmt) |
| { |
| struct loop *loop = (gimple_bb (phi))->loop_father; |
| struct loop *vect_loop = LOOP_VINFO_LOOP (loop_info); |
| enum tree_code code; |
| gimple *loop_use_stmt = NULL; |
| stmt_vec_info use_stmt_info; |
| tree lhs; |
| imm_use_iterator imm_iter; |
| use_operand_p use_p; |
| int nloop_uses, size = 0, n_out_of_loop_uses; |
| bool found = false; |
| |
| if (loop != vect_loop) |
| return false; |
| |
| auto_vec<stmt_vec_info, 8> reduc_chain; |
| lhs = PHI_RESULT (phi); |
| code = gimple_assign_rhs_code (first_stmt); |
| while (1) |
| { |
| nloop_uses = 0; |
| n_out_of_loop_uses = 0; |
| FOR_EACH_IMM_USE_FAST (use_p, imm_iter, lhs) |
| { |
| gimple *use_stmt = USE_STMT (use_p); |
| if (is_gimple_debug (use_stmt)) |
| continue; |
| |
| /* Check if we got back to the reduction phi. */ |
| if (use_stmt == phi) |
| { |
| loop_use_stmt = use_stmt; |
| found = true; |
| break; |
| } |
| |
| if (flow_bb_inside_loop_p (loop, gimple_bb (use_stmt))) |
| { |
| loop_use_stmt = use_stmt; |
| nloop_uses++; |
| } |
| else |
| n_out_of_loop_uses++; |
| |
| /* There are can be either a single use in the loop or two uses in |
| phi nodes. */ |
| if (nloop_uses > 1 || (n_out_of_loop_uses && nloop_uses)) |
| return false; |
| } |
| |
| if (found) |
| break; |
| |
| /* We reached a statement with no loop uses. */ |
| if (nloop_uses == 0) |
| return false; |
| |
| /* This is a loop exit phi, and we haven't reached the reduction phi. */ |
| if (gimple_code (loop_use_stmt) == GIMPLE_PHI) |
| return false; |
| |
| if (!is_gimple_assign (loop_use_stmt) |
| || code != gimple_assign_rhs_code (loop_use_stmt) |
| || !flow_bb_inside_loop_p (loop, gimple_bb (loop_use_stmt))) |
| return false; |
| |
| /* Insert USE_STMT into reduction chain. */ |
| use_stmt_info = loop_info->lookup_stmt (loop_use_stmt); |
| reduc_chain.safe_push (use_stmt_info); |
| |
| lhs = gimple_assign_lhs (loop_use_stmt); |
| size++; |
| } |
| |
| if (!found || loop_use_stmt != phi || size < 2) |
| return false; |
| |
| /* Swap the operands, if needed, to make the reduction operand be the second |
| operand. */ |
| lhs = PHI_RESULT (phi); |
| for (unsigned i = 0; i < reduc_chain.length (); ++i) |
| { |
| gassign *next_stmt = as_a <gassign *> (reduc_chain[i]->stmt); |
| if (gimple_assign_rhs2 (next_stmt) == lhs) |
| { |
| tree op = gimple_assign_rhs1 (next_stmt); |
| stmt_vec_info def_stmt_info = loop_info->lookup_def (op); |
| |
| /* Check that the other def is either defined in the loop |
| ("vect_internal_def"), or it's an induction (defined by a |
| loop-header phi-node). */ |
| if (def_stmt_info |
| && flow_bb_inside_loop_p (loop, gimple_bb (def_stmt_info->stmt)) |
| && vect_valid_reduction_input_p (def_stmt_info)) |
| { |
| lhs = gimple_assign_lhs (next_stmt); |
| continue; |
| } |
| |
| return false; |
| } |
| else |
| { |
| tree op = gimple_assign_rhs2 (next_stmt); |
| stmt_vec_info def_stmt_info = loop_info->lookup_def (op); |
| |
| /* Check that the other def is either defined in the loop |
| ("vect_internal_def"), or it's an induction (defined by a |
| loop-header phi-node). */ |
| if (def_stmt_info |
| && flow_bb_inside_loop_p (loop, gimple_bb (def_stmt_info->stmt)) |
| && vect_valid_reduction_input_p (def_stmt_info)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "swapping oprnds: %G", |
| next_stmt); |
| |
| swap_ssa_operands (next_stmt, |
| gimple_assign_rhs1_ptr (next_stmt), |
| gimple_assign_rhs2_ptr (next_stmt)); |
| update_stmt (next_stmt); |
| |
| if (CONSTANT_CLASS_P (gimple_assign_rhs1 (next_stmt))) |
| LOOP_VINFO_OPERANDS_SWAPPED (loop_info) = true; |
| } |
| else |
| return false; |
| } |
| |
| lhs = gimple_assign_lhs (next_stmt); |
| } |
| |
| /* Build up the actual chain. */ |
| for (unsigned i = 0; i < reduc_chain.length () - 1; ++i) |
| { |
| REDUC_GROUP_FIRST_ELEMENT (reduc_chain[i]) = reduc_chain[0]; |
| REDUC_GROUP_NEXT_ELEMENT (reduc_chain[i]) = reduc_chain[i+1]; |
| } |
| REDUC_GROUP_FIRST_ELEMENT (reduc_chain.last ()) = reduc_chain[0]; |
| REDUC_GROUP_NEXT_ELEMENT (reduc_chain.last ()) = NULL; |
| |
| /* Save the chain for further analysis in SLP detection. */ |
| LOOP_VINFO_REDUCTION_CHAINS (loop_info).safe_push (reduc_chain[0]); |
| REDUC_GROUP_SIZE (reduc_chain[0]) = size; |
| |
| return true; |
| } |
| |
| /* Return true if we need an in-order reduction for operation CODE |
| on type TYPE. NEED_WRAPPING_INTEGRAL_OVERFLOW is true if integer |
| overflow must wrap. */ |
| |
| static bool |
| needs_fold_left_reduction_p (tree type, tree_code code, |
| bool need_wrapping_integral_overflow) |
| { |
| /* CHECKME: check for !flag_finite_math_only too? */ |
| if (SCALAR_FLOAT_TYPE_P (type)) |
| switch (code) |
| { |
| case MIN_EXPR: |
| case MAX_EXPR: |
| return false; |
| |
| default: |
| return !flag_associative_math; |
| } |
| |
| if (INTEGRAL_TYPE_P (type)) |
| { |
| if (!operation_no_trapping_overflow (type, code)) |
| return true; |
| if (need_wrapping_integral_overflow |
| && !TYPE_OVERFLOW_WRAPS (type) |
| && operation_can_overflow (code)) |
| return true; |
| return false; |
| } |
| |
| if (SAT_FIXED_POINT_TYPE_P (type)) |
| return true; |
| |
| return false; |
| } |
| |
| /* Return true if the reduction PHI in LOOP with latch arg LOOP_ARG and |
| reduction operation CODE has a handled computation expression. */ |
| |
| bool |
| check_reduction_path (dump_user_location_t loc, loop_p loop, gphi *phi, |
| tree loop_arg, enum tree_code code) |
| { |
| auto_vec<std::pair<ssa_op_iter, use_operand_p> > path; |
| auto_bitmap visited; |
| tree lookfor = PHI_RESULT (phi); |
| ssa_op_iter curri; |
| use_operand_p curr = op_iter_init_phiuse (&curri, phi, SSA_OP_USE); |
| while (USE_FROM_PTR (curr) != loop_arg) |
| curr = op_iter_next_use (&curri); |
| curri.i = curri.numops; |
| do |
| { |
| path.safe_push (std::make_pair (curri, curr)); |
| tree use = USE_FROM_PTR (curr); |
| if (use == lookfor) |
| break; |
| gimple *def = SSA_NAME_DEF_STMT (use); |
| if (gimple_nop_p (def) |
| || ! flow_bb_inside_loop_p (loop, gimple_bb (def))) |
| { |
| pop: |
| do |
| { |
| std::pair<ssa_op_iter, use_operand_p> x = path.pop (); |
| curri = x.first; |
| curr = x.second; |
| do |
| curr = op_iter_next_use (&curri); |
| /* Skip already visited or non-SSA operands (from iterating |
| over PHI args). */ |
| while (curr != NULL_USE_OPERAND_P |
| && (TREE_CODE (USE_FROM_PTR (curr)) != SSA_NAME |
| || ! bitmap_set_bit (visited, |
| SSA_NAME_VERSION |
| (USE_FROM_PTR (curr))))); |
| } |
| while (curr == NULL_USE_OPERAND_P && ! path.is_empty ()); |
| if (curr == NULL_USE_OPERAND_P) |
| break; |
| } |
| else |
| { |
| if (gimple_code (def) == GIMPLE_PHI) |
| curr = op_iter_init_phiuse (&curri, as_a <gphi *>(def), SSA_OP_USE); |
| else |
| curr = op_iter_init_use (&curri, def, SSA_OP_USE); |
| while (curr != NULL_USE_OPERAND_P |
| && (TREE_CODE (USE_FROM_PTR (curr)) != SSA_NAME |
| || ! bitmap_set_bit (visited, |
| SSA_NAME_VERSION |
| (USE_FROM_PTR (curr))))) |
| curr = op_iter_next_use (&curri); |
| if (curr == NULL_USE_OPERAND_P) |
| goto pop; |
| } |
| } |
| while (1); |
| if (dump_file && (dump_flags & TDF_DETAILS)) |
| { |
| dump_printf_loc (MSG_NOTE, loc, "reduction path: "); |
| unsigned i; |
| std::pair<ssa_op_iter, use_operand_p> *x; |
| FOR_EACH_VEC_ELT (path, i, x) |
| dump_printf (MSG_NOTE, "%T ", USE_FROM_PTR (x->second)); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| /* Check whether the reduction path detected is valid. */ |
| bool fail = path.length () == 0; |
| bool neg = false; |
| for (unsigned i = 1; i < path.length (); ++i) |
| { |
| gimple *use_stmt = USE_STMT (path[i].second); |
| tree op = USE_FROM_PTR (path[i].second); |
| if (! has_single_use (op) |
| || ! is_gimple_assign (use_stmt)) |
| { |
| fail = true; |
| break; |
| } |
| if (gimple_assign_rhs_code (use_stmt) != code) |
| { |
| if (code == PLUS_EXPR |
| && gimple_assign_rhs_code (use_stmt) == MINUS_EXPR) |
| { |
| /* Track whether we negate the reduction value each iteration. */ |
| if (gimple_assign_rhs2 (use_stmt) == op) |
| neg = ! neg; |
| } |
| else |
| { |
| fail = true; |
| break; |
| } |
| } |
| } |
| return ! fail && ! neg; |
| } |
| |
| |
| /* Function vect_is_simple_reduction |
| |
| (1) Detect a cross-iteration def-use cycle that represents a simple |
| reduction computation. We look for the following pattern: |
| |
| loop_header: |
| a1 = phi < a0, a2 > |
| a3 = ... |
| a2 = operation (a3, a1) |
| |
| or |
| |
| a3 = ... |
| loop_header: |
| a1 = phi < a0, a2 > |
| a2 = operation (a3, a1) |
| |
| such that: |
| 1. operation is commutative and associative and it is safe to |
| change the order of the computation |
| 2. no uses for a2 in the loop (a2 is used out of the loop) |
| 3. no uses of a1 in the loop besides the reduction operation |
| 4. no uses of a1 outside the loop. |
| |
| Conditions 1,4 are tested here. |
| Conditions 2,3 are tested in vect_mark_stmts_to_be_vectorized. |
| |
| (2) Detect a cross-iteration def-use cycle in nested loops, i.e., |
| nested cycles. |
| |
| (3) Detect cycles of phi nodes in outer-loop vectorization, i.e., double |
| reductions: |
| |
| a1 = phi < a0, a2 > |
| inner loop (def of a3) |
| a2 = phi < a3 > |
| |
| (4) Detect condition expressions, ie: |
| for (int i = 0; i < N; i++) |
| if (a[i] < val) |
| ret_val = a[i]; |
| |
| */ |
| |
| static stmt_vec_info |
| vect_is_simple_reduction (loop_vec_info loop_info, stmt_vec_info phi_info, |
| bool *double_reduc, |
| bool need_wrapping_integral_overflow, |
| enum vect_reduction_type *v_reduc_type) |
| { |
| gphi *phi = as_a <gphi *> (phi_info->stmt); |
| struct loop *loop = (gimple_bb (phi))->loop_father; |
| struct loop *vect_loop = LOOP_VINFO_LOOP (loop_info); |
| bool nested_in_vect_loop = flow_loop_nested_p (vect_loop, loop); |
| gimple *phi_use_stmt = NULL; |
| enum tree_code orig_code, code; |
| tree op1, op2, op3 = NULL_TREE, op4 = NULL_TREE; |
| tree type; |
| tree name; |
| imm_use_iterator imm_iter; |
| use_operand_p use_p; |
| bool phi_def; |
| |
| *double_reduc = false; |
| *v_reduc_type = TREE_CODE_REDUCTION; |
| |
| tree phi_name = PHI_RESULT (phi); |
| /* ??? If there are no uses of the PHI result the inner loop reduction |
| won't be detected as possibly double-reduction by vectorizable_reduction |
| because that tries to walk the PHI arg from the preheader edge which |
| can be constant. See PR60382. */ |
| if (has_zero_uses (phi_name)) |
| return NULL; |
| unsigned nphi_def_loop_uses = 0; |
| FOR_EACH_IMM_USE_FAST (use_p, imm_iter, phi_name) |
| { |
| gimple *use_stmt = USE_STMT (use_p); |
| if (is_gimple_debug (use_stmt)) |
| continue; |
| |
| if (!flow_bb_inside_loop_p (loop, gimple_bb (use_stmt))) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "intermediate value used outside loop.\n"); |
| |
| return NULL; |
| } |
| |
| nphi_def_loop_uses++; |
| phi_use_stmt = use_stmt; |
| } |
| |
| edge latch_e = loop_latch_edge (loop); |
| tree loop_arg = PHI_ARG_DEF_FROM_EDGE (phi, latch_e); |
| if (TREE_CODE (loop_arg) != SSA_NAME) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "reduction: not ssa_name: %T\n", loop_arg); |
| return NULL; |
| } |
| |
| stmt_vec_info def_stmt_info = loop_info->lookup_def (loop_arg); |
| if (!def_stmt_info |
| || !flow_bb_inside_loop_p (loop, gimple_bb (def_stmt_info->stmt))) |
| return NULL; |
| |
| if (gassign *def_stmt = dyn_cast <gassign *> (def_stmt_info->stmt)) |
| { |
| name = gimple_assign_lhs (def_stmt); |
| phi_def = false; |
| } |
| else if (gphi *def_stmt = dyn_cast <gphi *> (def_stmt_info->stmt)) |
| { |
| name = PHI_RESULT (def_stmt); |
| phi_def = true; |
| } |
| else |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "reduction: unhandled reduction operation: %G", |
| def_stmt_info->stmt); |
| return NULL; |
| } |
| |
| unsigned nlatch_def_loop_uses = 0; |
| auto_vec<gphi *, 3> lcphis; |
| bool inner_loop_of_double_reduc = false; |
| FOR_EACH_IMM_USE_FAST (use_p, imm_iter, name) |
| { |
| gimple *use_stmt = USE_STMT (use_p); |
| if (is_gimple_debug (use_stmt)) |
| continue; |
| if (flow_bb_inside_loop_p (loop, gimple_bb (use_stmt))) |
| nlatch_def_loop_uses++; |
| else |
| { |
| /* We can have more than one loop-closed PHI. */ |
| lcphis.safe_push (as_a <gphi *> (use_stmt)); |
| if (nested_in_vect_loop |
| && (STMT_VINFO_DEF_TYPE (loop_info->lookup_stmt (use_stmt)) |
| == vect_double_reduction_def)) |
| inner_loop_of_double_reduc = true; |
| } |
| } |
| |
| /* If this isn't a nested cycle or if the nested cycle reduction value |
| is used ouside of the inner loop we cannot handle uses of the reduction |
| value. */ |
| if ((!nested_in_vect_loop || inner_loop_of_double_reduc) |
| && (nlatch_def_loop_uses > 1 || nphi_def_loop_uses > 1)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "reduction used in loop.\n"); |
| return NULL; |
| } |
| |
| /* If DEF_STMT is a phi node itself, we expect it to have a single argument |
| defined in the inner loop. */ |
| if (phi_def) |
| { |
| gphi *def_stmt = as_a <gphi *> (def_stmt_info->stmt); |
| op1 = PHI_ARG_DEF (def_stmt, 0); |
| |
| if (gimple_phi_num_args (def_stmt) != 1 |
| || TREE_CODE (op1) != SSA_NAME) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "unsupported phi node definition.\n"); |
| |
| return NULL; |
| } |
| |
| gimple *def1 = SSA_NAME_DEF_STMT (op1); |
| if (gimple_bb (def1) |
| && flow_bb_inside_loop_p (loop, gimple_bb (def_stmt)) |
| && loop->inner |
| && flow_bb_inside_loop_p (loop->inner, gimple_bb (def1)) |
| && is_gimple_assign (def1) |
| && is_a <gphi *> (phi_use_stmt) |
| && flow_bb_inside_loop_p (loop->inner, gimple_bb (phi_use_stmt))) |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_NOTE, def_stmt, |
| "detected double reduction: "); |
| |
| *double_reduc = true; |
| return def_stmt_info; |
| } |
| |
| return NULL; |
| } |
| |
| /* If we are vectorizing an inner reduction we are executing that |
| in the original order only in case we are not dealing with a |
| double reduction. */ |
| bool check_reduction = true; |
| if (flow_loop_nested_p (vect_loop, loop)) |
| { |
| gphi *lcphi; |
| unsigned i; |
| check_reduction = false; |
| FOR_EACH_VEC_ELT (lcphis, i, lcphi) |
| FOR_EACH_IMM_USE_FAST (use_p, imm_iter, gimple_phi_result (lcphi)) |
| { |
| gimple *use_stmt = USE_STMT (use_p); |
| if (is_gimple_debug (use_stmt)) |
| continue; |
| if (! flow_bb_inside_loop_p (vect_loop, gimple_bb (use_stmt))) |
| check_reduction = true; |
| } |
| } |
| |
| gassign *def_stmt = as_a <gassign *> (def_stmt_info->stmt); |
| code = orig_code = gimple_assign_rhs_code (def_stmt); |
| |
| if (nested_in_vect_loop && !check_reduction) |
| { |
| /* FIXME: Even for non-reductions code generation is funneled |
| through vectorizable_reduction for the stmt defining the |
| PHI latch value. So we have to artificially restrict ourselves |
| for the supported operations. */ |
| switch (get_gimple_rhs_class (code)) |
| { |
| case GIMPLE_BINARY_RHS: |
| case GIMPLE_TERNARY_RHS: |
| break; |
| default: |
| /* Not supported by vectorizable_reduction. */ |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_MISSED_OPTIMIZATION, def_stmt, |
| "nested cycle: not handled operation: "); |
| return NULL; |
| } |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_NOTE, def_stmt, "detected nested cycle: "); |
| return def_stmt_info; |
| } |
| |
| /* We can handle "res -= x[i]", which is non-associative by |
| simply rewriting this into "res += -x[i]". Avoid changing |
| gimple instruction for the first simple tests and only do this |
| if we're allowed to change code at all. */ |
| if (code == MINUS_EXPR && gimple_assign_rhs2 (def_stmt) != phi_name) |
| code = PLUS_EXPR; |
| |
| if (code == COND_EXPR) |
| { |
| if (! nested_in_vect_loop) |
| *v_reduc_type = COND_REDUCTION; |
| |
| op3 = gimple_assign_rhs1 (def_stmt); |
| if (COMPARISON_CLASS_P (op3)) |
| { |
| op4 = TREE_OPERAND (op3, 1); |
| op3 = TREE_OPERAND (op3, 0); |
| } |
| if (op3 == phi_name || op4 == phi_name) |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_MISSED_OPTIMIZATION, def_stmt, |
| "reduction: condition depends on previous" |
| " iteration: "); |
| return NULL; |
| } |
| |
| op1 = gimple_assign_rhs2 (def_stmt); |
| op2 = gimple_assign_rhs3 (def_stmt); |
| } |
| else if (!commutative_tree_code (code) || !associative_tree_code (code)) |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_MISSED_OPTIMIZATION, def_stmt, |
| "reduction: not commutative/associative: "); |
| return NULL; |
| } |
| else if (get_gimple_rhs_class (code) == GIMPLE_BINARY_RHS) |
| { |
| op1 = gimple_assign_rhs1 (def_stmt); |
| op2 = gimple_assign_rhs2 (def_stmt); |
| } |
| else |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_MISSED_OPTIMIZATION, def_stmt, |
| "reduction: not handled operation: "); |
| return NULL; |
| } |
| |
| if (TREE_CODE (op1) != SSA_NAME && TREE_CODE (op2) != SSA_NAME) |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_MISSED_OPTIMIZATION, def_stmt, |
| "reduction: both uses not ssa_names: "); |
| |
| return NULL; |
| } |
| |
| type = TREE_TYPE (gimple_assign_lhs (def_stmt)); |
| if ((TREE_CODE (op1) == SSA_NAME |
| && !types_compatible_p (type,TREE_TYPE (op1))) |
| || (TREE_CODE (op2) == SSA_NAME |
| && !types_compatible_p (type, TREE_TYPE (op2))) |
| || (op3 && TREE_CODE (op3) == SSA_NAME |
| && !types_compatible_p (type, TREE_TYPE (op3))) |
| || (op4 && TREE_CODE (op4) == SSA_NAME |
| && !types_compatible_p (type, TREE_TYPE (op4)))) |
| { |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "reduction: multiple types: operation type: " |
| "%T, operands types: %T,%T", |
| type, TREE_TYPE (op1), TREE_TYPE (op2)); |
| if (op3) |
| dump_printf (MSG_NOTE, ",%T", TREE_TYPE (op3)); |
| |
| if (op4) |
| dump_printf (MSG_NOTE, ",%T", TREE_TYPE (op4)); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| return NULL; |
| } |
| |
| /* Check whether it's ok to change the order of the computation. |
| Generally, when vectorizing a reduction we change the order of the |
| computation. This may change the behavior of the program in some |
| cases, so we need to check that this is ok. One exception is when |
| vectorizing an outer-loop: the inner-loop is executed sequentially, |
| and therefore vectorizing reductions in the inner-loop during |
| outer-loop vectorization is safe. */ |
| if (check_reduction |
| && *v_reduc_type == TREE_CODE_REDUCTION |
| && needs_fold_left_reduction_p (type, code, |
| need_wrapping_integral_overflow)) |
| *v_reduc_type = FOLD_LEFT_REDUCTION; |
| |
| /* Reduction is safe. We're dealing with one of the following: |
| 1) integer arithmetic and no trapv |
| 2) floating point arithmetic, and special flags permit this optimization |
| 3) nested cycle (i.e., outer loop vectorization). */ |
| stmt_vec_info def1_info = loop_info->lookup_def (op1); |
| stmt_vec_info def2_info = loop_info->lookup_def (op2); |
| if (code != COND_EXPR && !def1_info && !def2_info) |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_NOTE, def_stmt, "reduction: no defs for operands: "); |
| return NULL; |
| } |
| |
| /* Check that one def is the reduction def, defined by PHI, |
| the other def is either defined in the loop ("vect_internal_def"), |
| or it's an induction (defined by a loop-header phi-node). */ |
| |
| if (def2_info |
| && def2_info->stmt == phi |
| && (code == COND_EXPR |
| || !def1_info |
| || !flow_bb_inside_loop_p (loop, gimple_bb (def1_info->stmt)) |
| || vect_valid_reduction_input_p (def1_info))) |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_NOTE, def_stmt, "detected reduction: "); |
| return def_stmt_info; |
| } |
| |
| if (def1_info |
| && def1_info->stmt == phi |
| && (code == COND_EXPR |
| || !def2_info |
| || !flow_bb_inside_loop_p (loop, gimple_bb (def2_info->stmt)) |
| || vect_valid_reduction_input_p (def2_info))) |
| { |
| if (! nested_in_vect_loop && orig_code != MINUS_EXPR) |
| { |
| /* Check if we can swap operands (just for simplicity - so that |
| the rest of the code can assume that the reduction variable |
| is always the last (second) argument). */ |
| if (code == COND_EXPR) |
| { |
| /* Swap cond_expr by inverting the condition. */ |
| tree cond_expr = gimple_assign_rhs1 (def_stmt); |
| enum tree_code invert_code = ERROR_MARK; |
| enum tree_code cond_code = TREE_CODE (cond_expr); |
| |
| if (TREE_CODE_CLASS (cond_code) == tcc_comparison) |
| { |
| bool honor_nans = HONOR_NANS (TREE_OPERAND (cond_expr, 0)); |
| invert_code = invert_tree_comparison (cond_code, honor_nans); |
| } |
| if (invert_code != ERROR_MARK) |
| { |
| TREE_SET_CODE (cond_expr, invert_code); |
| swap_ssa_operands (def_stmt, |
| gimple_assign_rhs2_ptr (def_stmt), |
| gimple_assign_rhs3_ptr (def_stmt)); |
| } |
| else |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_NOTE, def_stmt, |
| "detected reduction: cannot swap operands " |
| "for cond_expr"); |
| return NULL; |
| } |
| } |
| else |
| swap_ssa_operands (def_stmt, gimple_assign_rhs1_ptr (def_stmt), |
| gimple_assign_rhs2_ptr (def_stmt)); |
| |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_NOTE, def_stmt, |
| "detected reduction: need to swap operands: "); |
| |
| if (CONSTANT_CLASS_P (gimple_assign_rhs1 (def_stmt))) |
| LOOP_VINFO_OPERANDS_SWAPPED (loop_info) = true; |
| } |
| else |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_NOTE, def_stmt, "detected reduction: "); |
| } |
| |
| return def_stmt_info; |
| } |
| |
| /* Try to find SLP reduction chain. */ |
| if (! nested_in_vect_loop |
| && code != COND_EXPR |
| && orig_code != MINUS_EXPR |
| && vect_is_slp_reduction (loop_info, phi, def_stmt)) |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_NOTE, def_stmt, |
| "reduction: detected reduction chain: "); |
| |
| return def_stmt_info; |
| } |
| |
| /* Look for the expression computing loop_arg from loop PHI result. */ |
| if (check_reduction_path (vect_location, loop, phi, loop_arg, code)) |
| return def_stmt_info; |
| |
| if (dump_enabled_p ()) |
| { |
| report_vect_op (MSG_MISSED_OPTIMIZATION, def_stmt, |
| "reduction: unknown pattern: "); |
| } |
| |
| return NULL; |
| } |
| |
| /* Wrapper around vect_is_simple_reduction, which will modify code |
| in-place if it enables detection of more reductions. Arguments |
| as there. */ |
| |
| stmt_vec_info |
| vect_force_simple_reduction (loop_vec_info loop_info, stmt_vec_info phi_info, |
| bool *double_reduc, |
| bool need_wrapping_integral_overflow) |
| { |
| enum vect_reduction_type v_reduc_type; |
| stmt_vec_info def_info |
| = vect_is_simple_reduction (loop_info, phi_info, double_reduc, |
| need_wrapping_integral_overflow, |
| &v_reduc_type); |
| if (def_info) |
| { |
| STMT_VINFO_REDUC_TYPE (phi_info) = v_reduc_type; |
| STMT_VINFO_REDUC_DEF (phi_info) = def_info; |
| STMT_VINFO_REDUC_TYPE (def_info) = v_reduc_type; |
| STMT_VINFO_REDUC_DEF (def_info) = phi_info; |
| } |
| return def_info; |
| } |
| |
| /* Calculate cost of peeling the loop PEEL_ITERS_PROLOGUE times. */ |
| int |
| vect_get_known_peeling_cost (loop_vec_info loop_vinfo, int peel_iters_prologue, |
| int *peel_iters_epilogue, |
| stmt_vector_for_cost *scalar_cost_vec, |
| stmt_vector_for_cost *prologue_cost_vec, |
| stmt_vector_for_cost *epilogue_cost_vec) |
| { |
| int retval = 0; |
| int assumed_vf = vect_vf_for_cost (loop_vinfo); |
| |
| if (!LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo)) |
| { |
| *peel_iters_epilogue = assumed_vf / 2; |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "cost model: epilogue peel iters set to vf/2 " |
| "because loop iterations are unknown .\n"); |
| |
| /* If peeled iterations are known but number of scalar loop |
| iterations are unknown, count a taken branch per peeled loop. */ |
| retval = record_stmt_cost (prologue_cost_vec, 1, cond_branch_taken, |
| NULL, 0, vect_prologue); |
| retval = record_stmt_cost (prologue_cost_vec, 1, cond_branch_taken, |
| NULL, 0, vect_epilogue); |
| } |
| else |
| { |
| int niters = LOOP_VINFO_INT_NITERS (loop_vinfo); |
| peel_iters_prologue = niters < peel_iters_prologue ? |
| niters : peel_iters_prologue; |
| *peel_iters_epilogue = (niters - peel_iters_prologue) % assumed_vf; |
| /* If we need to peel for gaps, but no peeling is required, we have to |
| peel VF iterations. */ |
| if (LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo) && !*peel_iters_epilogue) |
| *peel_iters_epilogue = assumed_vf; |
| } |
| |
| stmt_info_for_cost *si; |
| int j; |
| if (peel_iters_prologue) |
| FOR_EACH_VEC_ELT (*scalar_cost_vec, j, si) |
| retval += record_stmt_cost (prologue_cost_vec, |
| si->count * peel_iters_prologue, |
| si->kind, si->stmt_info, si->misalign, |
| vect_prologue); |
| if (*peel_iters_epilogue) |
| FOR_EACH_VEC_ELT (*scalar_cost_vec, j, si) |
| retval += record_stmt_cost (epilogue_cost_vec, |
| si->count * *peel_iters_epilogue, |
| si->kind, si->stmt_info, si->misalign, |
| vect_epilogue); |
| |
| return retval; |
| } |
| |
| /* Function vect_estimate_min_profitable_iters |
| |
| Return the number of iterations required for the vector version of the |
| loop to be profitable relative to the cost of the scalar version of the |
| loop. |
| |
| *RET_MIN_PROFITABLE_NITERS is a cost model profitability threshold |
| of iterations for vectorization. -1 value means loop vectorization |
| is not profitable. This returned value may be used for dynamic |
| profitability check. |
| |
| *RET_MIN_PROFITABLE_ESTIMATE is a profitability threshold to be used |
| for static check against estimated number of iterations. */ |
| |
| static void |
| vect_estimate_min_profitable_iters (loop_vec_info loop_vinfo, |
| int *ret_min_profitable_niters, |
| int *ret_min_profitable_estimate) |
| { |
| int min_profitable_iters; |
| int min_profitable_estimate; |
| int peel_iters_prologue; |
| int peel_iters_epilogue; |
| unsigned vec_inside_cost = 0; |
| int vec_outside_cost = 0; |
| unsigned vec_prologue_cost = 0; |
| unsigned vec_epilogue_cost = 0; |
| int scalar_single_iter_cost = 0; |
| int scalar_outside_cost = 0; |
| int assumed_vf = vect_vf_for_cost (loop_vinfo); |
| int npeel = LOOP_VINFO_PEELING_FOR_ALIGNMENT (loop_vinfo); |
| void *target_cost_data = LOOP_VINFO_TARGET_COST_DATA (loop_vinfo); |
| |
| /* Cost model disabled. */ |
| if (unlimited_cost_model (LOOP_VINFO_LOOP (loop_vinfo))) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "cost model disabled.\n"); |
| *ret_min_profitable_niters = 0; |
| *ret_min_profitable_estimate = 0; |
| return; |
| } |
| |
| /* Requires loop versioning tests to handle misalignment. */ |
| if (LOOP_REQUIRES_VERSIONING_FOR_ALIGNMENT (loop_vinfo)) |
| { |
| /* FIXME: Make cost depend on complexity of individual check. */ |
| unsigned len = LOOP_VINFO_MAY_MISALIGN_STMTS (loop_vinfo).length (); |
| (void) add_stmt_cost (target_cost_data, len, vector_stmt, NULL, 0, |
| vect_prologue); |
| if (dump_enabled_p ()) |
| dump_printf (MSG_NOTE, |
| "cost model: Adding cost of checks for loop " |
| "versioning to treat misalignment.\n"); |
| } |
| |
| /* Requires loop versioning with alias checks. */ |
| if (LOOP_REQUIRES_VERSIONING_FOR_ALIAS (loop_vinfo)) |
| { |
| /* FIXME: Make cost depend on complexity of individual check. */ |
| unsigned len = LOOP_VINFO_COMP_ALIAS_DDRS (loop_vinfo).length (); |
| (void) add_stmt_cost (target_cost_data, len, vector_stmt, NULL, 0, |
| vect_prologue); |
| len = LOOP_VINFO_CHECK_UNEQUAL_ADDRS (loop_vinfo).length (); |
| if (len) |
| /* Count LEN - 1 ANDs and LEN comparisons. */ |
| (void) add_stmt_cost (target_cost_data, len * 2 - 1, scalar_stmt, |
| NULL, 0, vect_prologue); |
| len = LOOP_VINFO_LOWER_BOUNDS (loop_vinfo).length (); |
| if (len) |
| { |
| /* Count LEN - 1 ANDs and LEN comparisons. */ |
| unsigned int nstmts = len * 2 - 1; |
| /* +1 for each bias that needs adding. */ |
| for (unsigned int i = 0; i < len; ++i) |
| if (!LOOP_VINFO_LOWER_BOUNDS (loop_vinfo)[i].unsigned_p) |
| nstmts += 1; |
| (void) add_stmt_cost (target_cost_data, nstmts, scalar_stmt, |
| NULL, 0, vect_prologue); |
| } |
| if (dump_enabled_p ()) |
| dump_printf (MSG_NOTE, |
| "cost model: Adding cost of checks for loop " |
| "versioning aliasing.\n"); |
| } |
| |
| /* Requires loop versioning with niter checks. */ |
| if (LOOP_REQUIRES_VERSIONING_FOR_NITERS (loop_vinfo)) |
| { |
| /* FIXME: Make cost depend on complexity of individual check. */ |
| (void) add_stmt_cost (target_cost_data, 1, vector_stmt, NULL, 0, |
| vect_prologue); |
| if (dump_enabled_p ()) |
| dump_printf (MSG_NOTE, |
| "cost model: Adding cost of checks for loop " |
| "versioning niters.\n"); |
| } |
| |
| if (LOOP_REQUIRES_VERSIONING (loop_vinfo)) |
| (void) add_stmt_cost (target_cost_data, 1, cond_branch_taken, NULL, 0, |
| vect_prologue); |
| |
| /* Count statements in scalar loop. Using this as scalar cost for a single |
| iteration for now. |
| |
| TODO: Add outer loop support. |
| |
| TODO: Consider assigning different costs to different scalar |
| statements. */ |
| |
| scalar_single_iter_cost |
| = LOOP_VINFO_SINGLE_SCALAR_ITERATION_COST (loop_vinfo); |
| |
| /* Add additional cost for the peeled instructions in prologue and epilogue |
| loop. (For fully-masked loops there will be no peeling.) |
| |
| FORNOW: If we don't know the value of peel_iters for prologue or epilogue |
| at compile-time - we assume it's vf/2 (the worst would be vf-1). |
| |
| TODO: Build an expression that represents peel_iters for prologue and |
| epilogue to be used in a run-time test. */ |
| |
| if (LOOP_VINFO_FULLY_MASKED_P (loop_vinfo)) |
| { |
| peel_iters_prologue = 0; |
| peel_iters_epilogue = 0; |
| |
| if (LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo)) |
| { |
| /* We need to peel exactly one iteration. */ |
| peel_iters_epilogue += 1; |
| stmt_info_for_cost *si; |
| int j; |
| FOR_EACH_VEC_ELT (LOOP_VINFO_SCALAR_ITERATION_COST (loop_vinfo), |
| j, si) |
| (void) add_stmt_cost (target_cost_data, si->count, |
| si->kind, si->stmt_info, si->misalign, |
| vect_epilogue); |
| } |
| } |
| else if (npeel < 0) |
| { |
| peel_iters_prologue = assumed_vf / 2; |
| if (dump_enabled_p ()) |
| dump_printf (MSG_NOTE, "cost model: " |
| "prologue peel iters set to vf/2.\n"); |
| |
| /* If peeling for alignment is unknown, loop bound of main loop becomes |
| unknown. */ |
| peel_iters_epilogue = assumed_vf / 2; |
| if (dump_enabled_p ()) |
| dump_printf (MSG_NOTE, "cost model: " |
| "epilogue peel iters set to vf/2 because " |
| "peeling for alignment is unknown.\n"); |
| |
| /* If peeled iterations are unknown, count a taken branch and a not taken |
| branch per peeled loop. Even if scalar loop iterations are known, |
| vector iterations are not known since peeled prologue iterations are |
| not known. Hence guards remain the same. */ |
| (void) add_stmt_cost (target_cost_data, 1, cond_branch_taken, |
| NULL, 0, vect_prologue); |
| (void) add_stmt_cost (target_cost_data, 1, cond_branch_not_taken, |
| NULL, 0, vect_prologue); |
| (void) add_stmt_cost (target_cost_data, 1, cond_branch_taken, |
| NULL, 0, vect_epilogue); |
| (void) add_stmt_cost (target_cost_data, 1, cond_branch_not_taken, |
| NULL, 0, vect_epilogue); |
| stmt_info_for_cost *si; |
| int j; |
| FOR_EACH_VEC_ELT (LOOP_VINFO_SCALAR_ITERATION_COST (loop_vinfo), j, si) |
| { |
| (void) add_stmt_cost (target_cost_data, |
| si->count * peel_iters_prologue, |
| si->kind, si->stmt_info, si->misalign, |
| vect_prologue); |
| (void) add_stmt_cost (target_cost_data, |
| si->count * peel_iters_epilogue, |
| si->kind, si->stmt_info, si->misalign, |
| vect_epilogue); |
| } |
| } |
| else |
| { |
| stmt_vector_for_cost prologue_cost_vec, epilogue_cost_vec; |
| stmt_info_for_cost *si; |
| int j; |
| void *data = LOOP_VINFO_TARGET_COST_DATA (loop_vinfo); |
| |
| prologue_cost_vec.create (2); |
| epilogue_cost_vec.create (2); |
| peel_iters_prologue = npeel; |
| |
| (void) vect_get_known_peeling_cost (loop_vinfo, peel_iters_prologue, |
| &peel_iters_epilogue, |
| &LOOP_VINFO_SCALAR_ITERATION_COST |
| (loop_vinfo), |
| &prologue_cost_vec, |
| &epilogue_cost_vec); |
| |
| FOR_EACH_VEC_ELT (prologue_cost_vec, j, si) |
| (void) add_stmt_cost (data, si->count, si->kind, si->stmt_info, |
| si->misalign, vect_prologue); |
| |
| FOR_EACH_VEC_ELT (epilogue_cost_vec, j, si) |
| (void) add_stmt_cost (data, si->count, si->kind, si->stmt_info, |
| si->misalign, vect_epilogue); |
| |
| prologue_cost_vec.release (); |
| epilogue_cost_vec.release (); |
| } |
| |
| /* FORNOW: The scalar outside cost is incremented in one of the |
| following ways: |
| |
| 1. The vectorizer checks for alignment and aliasing and generates |
| a condition that allows dynamic vectorization. A cost model |
| check is ANDED with the versioning condition. Hence scalar code |
| path now has the added cost of the versioning check. |
| |
| if (cost > th & versioning_check) |
| jmp to vector code |
| |
| Hence run-time scalar is incremented by not-taken branch cost. |
| |
| 2. The vectorizer then checks if a prologue is required. If the |
| cost model check was not done before during versioning, it has to |
| be done before the prologue check. |
| |
| if (cost <= th) |
| prologue = scalar_iters |
| if (prologue == 0) |
| jmp to vector code |
| else |
| execute prologue |
| if (prologue == num_iters) |
| go to exit |
| |
| Hence the run-time scalar cost is incremented by a taken branch, |
| plus a not-taken branch, plus a taken branch cost. |
| |
| 3. The vectorizer then checks if an epilogue is required. If the |
| cost model check was not done before during prologue check, it |
| has to be done with the epilogue check. |
| |
| if (prologue == 0) |
| jmp to vector code |
| else |
| execute prologue |
| if (prologue == num_iters) |
| go to exit |
| vector code: |
| if ((cost <= th) | (scalar_iters-prologue-epilogue == 0)) |
| jmp to epilogue |
| |
| Hence the run-time scalar cost should be incremented by 2 taken |
| branches. |
| |
| TODO: The back end may reorder the BBS's differently and reverse |
| conditions/branch directions. Change the estimates below to |
| something more reasonable. */ |
| |
| /* If the number of iterations is known and we do not do versioning, we can |
| decide whether to vectorize at compile time. Hence the scalar version |
| do not carry cost model guard costs. */ |
| if (!LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo) |
| || LOOP_REQUIRES_VERSIONING (loop_vinfo)) |
| { |
| /* Cost model check occurs at versioning. */ |
| if (LOOP_REQUIRES_VERSIONING (loop_vinfo)) |
| scalar_outside_cost += vect_get_stmt_cost (cond_branch_not_taken); |
| else |
| { |
| /* Cost model check occurs at prologue generation. */ |
| if (LOOP_VINFO_PEELING_FOR_ALIGNMENT (loop_vinfo) < 0) |
| scalar_outside_cost += 2 * vect_get_stmt_cost (cond_branch_taken) |
| + vect_get_stmt_cost (cond_branch_not_taken); |
| /* Cost model check occurs at epilogue generation. */ |
| else |
| scalar_outside_cost += 2 * vect_get_stmt_cost (cond_branch_taken); |
| } |
| } |
| |
| /* Complete the target-specific cost calculations. */ |
| finish_cost (LOOP_VINFO_TARGET_COST_DATA (loop_vinfo), &vec_prologue_cost, |
| &vec_inside_cost, &vec_epilogue_cost); |
| |
| vec_outside_cost = (int)(vec_prologue_cost + vec_epilogue_cost); |
| |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, "Cost model analysis: \n"); |
| dump_printf (MSG_NOTE, " Vector inside of loop cost: %d\n", |
| vec_inside_cost); |
| dump_printf (MSG_NOTE, " Vector prologue cost: %d\n", |
| vec_prologue_cost); |
| dump_printf (MSG_NOTE, " Vector epilogue cost: %d\n", |
| vec_epilogue_cost); |
| dump_printf (MSG_NOTE, " Scalar iteration cost: %d\n", |
| scalar_single_iter_cost); |
| dump_printf (MSG_NOTE, " Scalar outside cost: %d\n", |
| scalar_outside_cost); |
| dump_printf (MSG_NOTE, " Vector outside cost: %d\n", |
| vec_outside_cost); |
| dump_printf (MSG_NOTE, " prologue iterations: %d\n", |
| peel_iters_prologue); |
| dump_printf (MSG_NOTE, " epilogue iterations: %d\n", |
| peel_iters_epilogue); |
| } |
| |
| /* Calculate number of iterations required to make the vector version |
| profitable, relative to the loop bodies only. The following condition |
| must hold true: |
| SIC * niters + SOC > VIC * ((niters - NPEEL) / VF) + VOC |
| where |
| SIC = scalar iteration cost, VIC = vector iteration cost, |
| VOC = vector outside cost, VF = vectorization factor, |
| NPEEL = prologue iterations + epilogue iterations, |
| SOC = scalar outside cost for run time cost model check. */ |
| |
| int saving_per_viter = (scalar_single_iter_cost * assumed_vf |
| - vec_inside_cost); |
| if (saving_per_viter <= 0) |
| { |
| if (LOOP_VINFO_LOOP (loop_vinfo)->force_vectorize) |
| warning_at (vect_location.get_location_t (), OPT_Wopenmp_simd, |
| "vectorization did not happen for a simd loop"); |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "cost model: the vector iteration cost = %d " |
| "divided by the scalar iteration cost = %d " |
| "is greater or equal to the vectorization factor = %d" |
| ".\n", |
| vec_inside_cost, scalar_single_iter_cost, assumed_vf); |
| *ret_min_profitable_niters = -1; |
| *ret_min_profitable_estimate = -1; |
| return; |
| } |
| |
| /* ??? The "if" arm is written to handle all cases; see below for what |
| we would do for !LOOP_VINFO_FULLY_MASKED_P. */ |
| if (LOOP_VINFO_FULLY_MASKED_P (loop_vinfo)) |
| { |
| /* Rewriting the condition above in terms of the number of |
| vector iterations (vniters) rather than the number of |
| scalar iterations (niters) gives: |
| |
| SIC * (vniters * VF + NPEEL) + SOC > VIC * vniters + VOC |
| |
| <==> vniters * (SIC * VF - VIC) > VOC - SIC * NPEEL - SOC |
| |
| For integer N, X and Y when X > 0: |
| |
| N * X > Y <==> N >= (Y /[floor] X) + 1. */ |
| int outside_overhead = (vec_outside_cost |
| - scalar_single_iter_cost * peel_iters_prologue |
| - scalar_single_iter_cost * peel_iters_epilogue |
| - scalar_outside_cost); |
| /* We're only interested in cases that require at least one |
| vector iteration. */ |
| int min_vec_niters = 1; |
| if (outside_overhead > 0) |
| min_vec_niters = outside_overhead / saving_per_viter + 1; |
| |
| if (dump_enabled_p ()) |
| dump_printf (MSG_NOTE, " Minimum number of vector iterations: %d\n", |
| min_vec_niters); |
| |
| if (LOOP_VINFO_FULLY_MASKED_P (loop_vinfo)) |
| { |
| /* Now that we know the minimum number of vector iterations, |
| find the minimum niters for which the scalar cost is larger: |
| |
| SIC * niters > VIC * vniters + VOC - SOC |
| |
| We know that the minimum niters is no more than |
| vniters * VF + NPEEL, but it might be (and often is) less |
| than that if a partial vector iteration is cheaper than the |
| equivalent scalar code. */ |
| int threshold = (vec_inside_cost * min_vec_niters |
| + vec_outside_cost |
| - scalar_outside_cost); |
| if (threshold <= 0) |
| min_profitable_iters = 1; |
| else |
| min_profitable_iters = threshold / scalar_single_iter_cost + 1; |
| } |
| else |
| /* Convert the number of vector iterations into a number of |
| scalar iterations. */ |
| min_profitable_iters = (min_vec_niters * assumed_vf |
| + peel_iters_prologue |
| + peel_iters_epilogue); |
| } |
| else |
| { |
| min_profitable_iters = ((vec_outside_cost - scalar_outside_cost) |
| * assumed_vf |
| - vec_inside_cost * peel_iters_prologue |
| - vec_inside_cost * peel_iters_epilogue); |
| if (min_profitable_iters <= 0) |
| min_profitable_iters = 0; |
| else |
| { |
| min_profitable_iters /= saving_per_viter; |
| |
| if ((scalar_single_iter_cost * assumed_vf * min_profitable_iters) |
| <= (((int) vec_inside_cost * min_profitable_iters) |
| + (((int) vec_outside_cost - scalar_outside_cost) |
| * assumed_vf))) |
| min_profitable_iters++; |
| } |
| } |
| |
| if (dump_enabled_p ()) |
| dump_printf (MSG_NOTE, |
| " Calculated minimum iters for profitability: %d\n", |
| min_profitable_iters); |
| |
| if (!LOOP_VINFO_FULLY_MASKED_P (loop_vinfo) |
| && min_profitable_iters < (assumed_vf + peel_iters_prologue)) |
| /* We want the vectorized loop to execute at least once. */ |
| min_profitable_iters = assumed_vf + peel_iters_prologue; |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| " Runtime profitability threshold = %d\n", |
| min_profitable_iters); |
| |
| *ret_min_profitable_niters = min_profitable_iters; |
| |
| /* Calculate number of iterations required to make the vector version |
| profitable, relative to the loop bodies only. |
| |
| Non-vectorized variant is SIC * niters and it must win over vector |
| variant on the expected loop trip count. The following condition must hold true: |
| SIC * niters > VIC * ((niters - NPEEL) / VF) + VOC + SOC */ |
| |
| if (vec_outside_cost <= 0) |
| min_profitable_estimate = 0; |
| else if (LOOP_VINFO_FULLY_MASKED_P (loop_vinfo)) |
| { |
| /* This is a repeat of the code above, but with + SOC rather |
| than - SOC. */ |
| int outside_overhead = (vec_outside_cost |
| - scalar_single_iter_cost * peel_iters_prologue |
| - scalar_single_iter_cost * peel_iters_epilogue |
| + scalar_outside_cost); |
| int min_vec_niters = 1; |
| if (outside_overhead > 0) |
| min_vec_niters = outside_overhead / saving_per_viter + 1; |
| |
| if (LOOP_VINFO_FULLY_MASKED_P (loop_vinfo)) |
| { |
| int threshold = (vec_inside_cost * min_vec_niters |
| + vec_outside_cost |
| + scalar_outside_cost); |
| min_profitable_estimate = threshold / scalar_single_iter_cost + 1; |
| } |
| else |
| min_profitable_estimate = (min_vec_niters * assumed_vf |
| + peel_iters_prologue |
| + peel_iters_epilogue); |
| } |
| else |
| { |
| min_profitable_estimate = ((vec_outside_cost + scalar_outside_cost) |
| * assumed_vf |
| - vec_inside_cost * peel_iters_prologue |
| - vec_inside_cost * peel_iters_epilogue) |
| / ((scalar_single_iter_cost * assumed_vf) |
| - vec_inside_cost); |
| } |
| min_profitable_estimate = MAX (min_profitable_estimate, min_profitable_iters); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| " Static estimate profitability threshold = %d\n", |
| min_profitable_estimate); |
| |
| *ret_min_profitable_estimate = min_profitable_estimate; |
| } |
| |
| /* Writes into SEL a mask for a vec_perm, equivalent to a vec_shr by OFFSET |
| vector elements (not bits) for a vector with NELT elements. */ |
| static void |
| calc_vec_perm_mask_for_shift (unsigned int offset, unsigned int nelt, |
| vec_perm_builder *sel) |
| { |
| /* The encoding is a single stepped pattern. Any wrap-around is handled |
| by vec_perm_indices. */ |
| sel->new_vector (nelt, 1, 3); |
| for (unsigned int i = 0; i < 3; i++) |
| sel->quick_push (i + offset); |
| } |
| |
| /* Checks whether the target supports whole-vector shifts for vectors of mode |
| MODE. This is the case if _either_ the platform handles vec_shr_optab, _or_ |
| it supports vec_perm_const with masks for all necessary shift amounts. */ |
| static bool |
| have_whole_vector_shift (machine_mode mode) |
| { |
| if (optab_handler (vec_shr_optab, mode) != CODE_FOR_nothing) |
| return true; |
| |
| /* Variable-length vectors should be handled via the optab. */ |
| unsigned int nelt; |
| if (!GET_MODE_NUNITS (mode).is_constant (&nelt)) |
| return false; |
| |
| vec_perm_builder sel; |
| vec_perm_indices indices; |
| for (unsigned int i = nelt / 2; i >= 1; i /= 2) |
| { |
| calc_vec_perm_mask_for_shift (i, nelt, &sel); |
| indices.new_vector (sel, 2, nelt); |
| if (!can_vec_perm_const_p (mode, indices, false)) |
| return false; |
| } |
| return true; |
| } |
| |
| /* TODO: Close dependency between vect_model_*_cost and vectorizable_* |
| functions. Design better to avoid maintenance issues. */ |
| |
| /* Function vect_model_reduction_cost. |
| |
| Models cost for a reduction operation, including the vector ops |
| generated within the strip-mine loop, the initial definition before |
| the loop, and the epilogue code that must be generated. */ |
| |
| static void |
| vect_model_reduction_cost (stmt_vec_info stmt_info, internal_fn reduc_fn, |
| int ncopies, stmt_vector_for_cost *cost_vec) |
| { |
| int prologue_cost = 0, epilogue_cost = 0, inside_cost; |
| enum tree_code code; |
| optab optab; |
| tree vectype; |
| machine_mode mode; |
| loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info); |
| struct loop *loop = NULL; |
| |
| if (loop_vinfo) |
| loop = LOOP_VINFO_LOOP (loop_vinfo); |
| |
| /* Condition reductions generate two reductions in the loop. */ |
| vect_reduction_type reduction_type |
| = STMT_VINFO_VEC_REDUCTION_TYPE (stmt_info); |
| if (reduction_type == COND_REDUCTION) |
| ncopies *= 2; |
| |
| vectype = STMT_VINFO_VECTYPE (stmt_info); |
| mode = TYPE_MODE (vectype); |
| stmt_vec_info orig_stmt_info = vect_orig_stmt (stmt_info); |
| |
| code = gimple_assign_rhs_code (orig_stmt_info->stmt); |
| |
| if (reduction_type == EXTRACT_LAST_REDUCTION |
| || reduction_type == FOLD_LEFT_REDUCTION) |
| { |
| /* No extra instructions needed in the prologue. */ |
| prologue_cost = 0; |
| |
| if (reduction_type == EXTRACT_LAST_REDUCTION || reduc_fn != IFN_LAST) |
| /* Count one reduction-like operation per vector. */ |
| inside_cost = record_stmt_cost (cost_vec, ncopies, vec_to_scalar, |
| stmt_info, 0, vect_body); |
| else |
| { |
| /* Use NELEMENTS extracts and NELEMENTS scalar ops. */ |
| unsigned int nelements = ncopies * vect_nunits_for_cost (vectype); |
| inside_cost = record_stmt_cost (cost_vec, nelements, |
| vec_to_scalar, stmt_info, 0, |
| vect_body); |
| inside_cost += record_stmt_cost (cost_vec, nelements, |
| scalar_stmt, stmt_info, 0, |
| vect_body); |
| } |
| } |
| else |
| { |
| /* Add in cost for initial definition. |
| For cond reduction we have four vectors: initial index, step, |
| initial result of the data reduction, initial value of the index |
| reduction. */ |
| int prologue_stmts = reduction_type == COND_REDUCTION ? 4 : 1; |
| prologue_cost += record_stmt_cost (cost_vec, prologue_stmts, |
| scalar_to_vec, stmt_info, 0, |
| vect_prologue); |
| |
| /* Cost of reduction op inside loop. */ |
| inside_cost = record_stmt_cost (cost_vec, ncopies, vector_stmt, |
| stmt_info, 0, vect_body); |
| } |
| |
| /* Determine cost of epilogue code. |
| |
| We have a reduction operator that will reduce the vector in one statement. |
| Also requires scalar extract. */ |
| |
| if (!loop || !nested_in_vect_loop_p (loop, orig_stmt_info)) |
| { |
| if (reduc_fn != IFN_LAST) |
| { |
| if (reduction_type == COND_REDUCTION) |
| { |
| /* An EQ stmt and an COND_EXPR stmt. */ |
| epilogue_cost += record_stmt_cost (cost_vec, 2, |
| vector_stmt, stmt_info, 0, |
| vect_epilogue); |
| /* Reduction of the max index and a reduction of the found |
| values. */ |
| epilogue_cost += record_stmt_cost (cost_vec, 2, |
| vec_to_scalar, stmt_info, 0, |
| vect_epilogue); |
| /* A broadcast of the max value. */ |
| epilogue_cost += record_stmt_cost (cost_vec, 1, |
| scalar_to_vec, stmt_info, 0, |
| vect_epilogue); |
| } |
| else |
| { |
| epilogue_cost += record_stmt_cost (cost_vec, 1, vector_stmt, |
| stmt_info, 0, vect_epilogue); |
| epilogue_cost += record_stmt_cost (cost_vec, 1, |
| vec_to_scalar, stmt_info, 0, |
| vect_epilogue); |
| } |
| } |
| else if (reduction_type == COND_REDUCTION) |
| { |
| unsigned estimated_nunits = vect_nunits_for_cost (vectype); |
| /* Extraction of scalar elements. */ |
| epilogue_cost += record_stmt_cost (cost_vec, |
| 2 * estimated_nunits, |
| vec_to_scalar, stmt_info, 0, |
| vect_epilogue); |
| /* Scalar max reductions via COND_EXPR / MAX_EXPR. */ |
| epilogue_cost += record_stmt_cost (cost_vec, |
| 2 * estimated_nunits - 3, |
| scalar_stmt, stmt_info, 0, |
| vect_epilogue); |
| } |
| else if (reduction_type == EXTRACT_LAST_REDUCTION |
| || reduction_type == FOLD_LEFT_REDUCTION) |
| /* No extra instructions need in the epilogue. */ |
| ; |
| else |
| { |
| int vec_size_in_bits = tree_to_uhwi (TYPE_SIZE (vectype)); |
| tree bitsize = |
| TYPE_SIZE (TREE_TYPE (gimple_assign_lhs (orig_stmt_info->stmt))); |
| int element_bitsize = tree_to_uhwi (bitsize); |
| int nelements = vec_size_in_bits / element_bitsize; |
| |
| if (code == COND_EXPR) |
| code = MAX_EXPR; |
| |
| optab = optab_for_tree_code (code, vectype, optab_default); |
| |
| /* We have a whole vector shift available. */ |
| if (optab != unknown_optab |
| && VECTOR_MODE_P (mode) |
| && optab_handler (optab, mode) != CODE_FOR_nothing |
| && have_whole_vector_shift (mode)) |
| { |
| /* Final reduction via vector shifts and the reduction operator. |
| Also requires scalar extract. */ |
| epilogue_cost += record_stmt_cost (cost_vec, |
| exact_log2 (nelements) * 2, |
| vector_stmt, stmt_info, 0, |
| vect_epilogue); |
| epilogue_cost += record_stmt_cost (cost_vec, 1, |
| vec_to_scalar, stmt_info, 0, |
| vect_epilogue); |
| } |
| else |
| /* Use extracts and reduction op for final reduction. For N |
| elements, we have N extracts and N-1 reduction ops. */ |
| epilogue_cost += record_stmt_cost (cost_vec, |
| nelements + nelements - 1, |
| vector_stmt, stmt_info, 0, |
| vect_epilogue); |
| } |
| } |
| |
| if (dump_enabled_p ()) |
| dump_printf (MSG_NOTE, |
| "vect_model_reduction_cost: inside_cost = %d, " |
| "prologue_cost = %d, epilogue_cost = %d .\n", inside_cost, |
| prologue_cost, epilogue_cost); |
| } |
| |
| |
| /* Function vect_model_induction_cost. |
| |
| Models cost for induction operations. */ |
| |
| static void |
| vect_model_induction_cost (stmt_vec_info stmt_info, int ncopies, |
| stmt_vector_for_cost *cost_vec) |
| { |
| unsigned inside_cost, prologue_cost; |
| |
| if (PURE_SLP_STMT (stmt_info)) |
| return; |
| |
| /* loop cost for vec_loop. */ |
| inside_cost = record_stmt_cost (cost_vec, ncopies, vector_stmt, |
| stmt_info, 0, vect_body); |
| |
| /* prologue cost for vec_init and vec_step. */ |
| prologue_cost = record_stmt_cost (cost_vec, 2, scalar_to_vec, |
| stmt_info, 0, vect_prologue); |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "vect_model_induction_cost: inside_cost = %d, " |
| "prologue_cost = %d .\n", inside_cost, prologue_cost); |
| } |
| |
| |
| |
| /* Function get_initial_def_for_reduction |
| |
| Input: |
| STMT_VINFO - a stmt that performs a reduction operation in the loop. |
| INIT_VAL - the initial value of the reduction variable |
| |
| Output: |
| ADJUSTMENT_DEF - a tree that holds a value to be added to the final result |
| of the reduction (used for adjusting the epilog - see below). |
| Return a vector variable, initialized according to the operation that |
| STMT_VINFO performs. This vector will be used as the initial value |
| of the vector of partial results. |
| |
| Option1 (adjust in epilog): Initialize the vector as follows: |
| add/bit or/xor: [0,0,...,0,0] |
| mult/bit and: [1,1,...,1,1] |
| min/max/cond_expr: [init_val,init_val,..,init_val,init_val] |
| and when necessary (e.g. add/mult case) let the caller know |
| that it needs to adjust the result by init_val. |
| |
| Option2: Initialize the vector as follows: |
| add/bit or/xor: [init_val,0,0,...,0] |
| mult/bit and: [init_val,1,1,...,1] |
| min/max/cond_expr: [init_val,init_val,...,init_val] |
| and no adjustments are needed. |
| |
| For example, for the following code: |
| |
| s = init_val; |
| for (i=0;i<n;i++) |
| s = s + a[i]; |
| |
| STMT_VINFO is 's = s + a[i]', and the reduction variable is 's'. |
| For a vector of 4 units, we want to return either [0,0,0,init_val], |
| or [0,0,0,0] and let the caller know that it needs to adjust |
| the result at the end by 'init_val'. |
| |
| FORNOW, we are using the 'adjust in epilog' scheme, because this way the |
| initialization vector is simpler (same element in all entries), if |
| ADJUSTMENT_DEF is not NULL, and Option2 otherwise. |
| |
| A cost model should help decide between these two schemes. */ |
| |
| tree |
| get_initial_def_for_reduction (stmt_vec_info stmt_vinfo, tree init_val, |
| tree *adjustment_def) |
| { |
| loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_vinfo); |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| tree scalar_type = TREE_TYPE (init_val); |
| tree vectype = get_vectype_for_scalar_type (scalar_type); |
| enum tree_code code = gimple_assign_rhs_code (stmt_vinfo->stmt); |
| tree def_for_init; |
| tree init_def; |
| REAL_VALUE_TYPE real_init_val = dconst0; |
| int int_init_val = 0; |
| gimple_seq stmts = NULL; |
| |
| gcc_assert (vectype); |
| |
| gcc_assert (POINTER_TYPE_P (scalar_type) || INTEGRAL_TYPE_P (scalar_type) |
| || SCALAR_FLOAT_TYPE_P (scalar_type)); |
| |
| gcc_assert (nested_in_vect_loop_p (loop, stmt_vinfo) |
| || loop == (gimple_bb (stmt_vinfo->stmt))->loop_father); |
| |
| vect_reduction_type reduction_type |
| = STMT_VINFO_VEC_REDUCTION_TYPE (stmt_vinfo); |
| |
| switch (code) |
| { |
| case WIDEN_SUM_EXPR: |
| case DOT_PROD_EXPR: |
| case SAD_EXPR: |
| case PLUS_EXPR: |
| case MINUS_EXPR: |
| case BIT_IOR_EXPR: |
| case BIT_XOR_EXPR: |
| case MULT_EXPR: |
| case BIT_AND_EXPR: |
| { |
| /* ADJUSTMENT_DEF is NULL when called from |
| vect_create_epilog_for_reduction to vectorize double reduction. */ |
| if (adjustment_def) |
| *adjustment_def = init_val; |
| |
| if (code == MULT_EXPR) |
| { |
| real_init_val = dconst1; |
| int_init_val = 1; |
| } |
| |
| if (code == BIT_AND_EXPR) |
| int_init_val = -1; |
| |
| if (SCALAR_FLOAT_TYPE_P (scalar_type)) |
| def_for_init = build_real (scalar_type, real_init_val); |
| else |
| def_for_init = build_int_cst (scalar_type, int_init_val); |
| |
| if (adjustment_def) |
| /* Option1: the first element is '0' or '1' as well. */ |
| init_def = gimple_build_vector_from_val (&stmts, vectype, |
| def_for_init); |
| else if (!TYPE_VECTOR_SUBPARTS (vectype).is_constant ()) |
| { |
| /* Option2 (variable length): the first element is INIT_VAL. */ |
| init_def = gimple_build_vector_from_val (&stmts, vectype, |
| def_for_init); |
| init_def = gimple_build (&stmts, CFN_VEC_SHL_INSERT, |
| vectype, init_def, init_val); |
| } |
| else |
| { |
| /* Option2: the first element is INIT_VAL. */ |
| tree_vector_builder elts (vectype, 1, 2); |
| elts.quick_push (init_val); |
| elts.quick_push (def_for_init); |
| init_def = gimple_build_vector (&stmts, &elts); |
| } |
| } |
| break; |
| |
| case MIN_EXPR: |
| case MAX_EXPR: |
| case COND_EXPR: |
| { |
| if (adjustment_def) |
| { |
| *adjustment_def = NULL_TREE; |
| if (reduction_type != COND_REDUCTION |
| && reduction_type != EXTRACT_LAST_REDUCTION) |
| { |
| init_def = vect_get_vec_def_for_operand (init_val, stmt_vinfo); |
| break; |
| } |
| } |
| init_val = gimple_convert (&stmts, TREE_TYPE (vectype), init_val); |
| init_def = gimple_build_vector_from_val (&stmts, vectype, init_val); |
| } |
| break; |
| |
| default: |
| gcc_unreachable (); |
| } |
| |
| if (stmts) |
| gsi_insert_seq_on_edge_immediate (loop_preheader_edge (loop), stmts); |
| return init_def; |
| } |
| |
| /* Get at the initial defs for the reduction PHIs in SLP_NODE. |
| NUMBER_OF_VECTORS is the number of vector defs to create. |
| If NEUTRAL_OP is nonnull, introducing extra elements of that |
| value will not change the result. */ |
| |
| static void |
| get_initial_defs_for_reduction (slp_tree slp_node, |
| vec<tree> *vec_oprnds, |
| unsigned int number_of_vectors, |
| bool reduc_chain, tree neutral_op) |
| { |
| vec<stmt_vec_info> stmts = SLP_TREE_SCALAR_STMTS (slp_node); |
| stmt_vec_info stmt_vinfo = stmts[0]; |
| unsigned HOST_WIDE_INT nunits; |
| unsigned j, number_of_places_left_in_vector; |
| tree vector_type; |
| unsigned int group_size = stmts.length (); |
| unsigned int i; |
| struct loop *loop; |
| |
| vector_type = STMT_VINFO_VECTYPE (stmt_vinfo); |
| |
| gcc_assert (STMT_VINFO_DEF_TYPE (stmt_vinfo) == vect_reduction_def); |
| |
| loop = (gimple_bb (stmt_vinfo->stmt))->loop_father; |
| gcc_assert (loop); |
| edge pe = loop_preheader_edge (loop); |
| |
| gcc_assert (!reduc_chain || neutral_op); |
| |
| /* NUMBER_OF_COPIES is the number of times we need to use the same values in |
| created vectors. It is greater than 1 if unrolling is performed. |
| |
| For example, we have two scalar operands, s1 and s2 (e.g., group of |
| strided accesses of size two), while NUNITS is four (i.e., four scalars |
| of this type can be packed in a vector). The output vector will contain |
| two copies of each scalar operand: {s1, s2, s1, s2}. (NUMBER_OF_COPIES |
| will be 2). |
| |
| If REDUC_GROUP_SIZE > NUNITS, the scalars will be split into several |
| vectors containing the operands. |
| |
| For example, NUNITS is four as before, and the group size is 8 |
| (s1, s2, ..., s8). We will create two vectors {s1, s2, s3, s4} and |
| {s5, s6, s7, s8}. */ |
| |
| if (!TYPE_VECTOR_SUBPARTS (vector_type).is_constant (&nunits)) |
| nunits = group_size; |
| |
| number_of_places_left_in_vector = nunits; |
| bool constant_p = true; |
| tree_vector_builder elts (vector_type, nunits, 1); |
| elts.quick_grow (nunits); |
| gimple_seq ctor_seq = NULL; |
| for (j = 0; j < nunits * number_of_vectors; ++j) |
| { |
| tree op; |
| i = j % group_size; |
| stmt_vinfo = stmts[i]; |
| |
| /* Get the def before the loop. In reduction chain we have only |
| one initial value. Else we have as many as PHIs in the group. */ |
| if (reduc_chain) |
| op = j != 0 ? neutral_op : PHI_ARG_DEF_FROM_EDGE (stmt_vinfo->stmt, pe); |
| else if (((vec_oprnds->length () + 1) * nunits |
| - number_of_places_left_in_vector >= group_size) |
| && neutral_op) |
| op = neutral_op; |
| else |
| op = PHI_ARG_DEF_FROM_EDGE (stmt_vinfo->stmt, pe); |
| |
| /* Create 'vect_ = {op0,op1,...,opn}'. */ |
| number_of_places_left_in_vector--; |
| elts[nunits - number_of_places_left_in_vector - 1] = op; |
| if (!CONSTANT_CLASS_P (op)) |
| constant_p = false; |
| |
| if (number_of_places_left_in_vector == 0) |
| { |
| tree init; |
| if (constant_p && !neutral_op |
| ? multiple_p (TYPE_VECTOR_SUBPARTS (vector_type), nunits) |
| : known_eq (TYPE_VECTOR_SUBPARTS (vector_type), nunits)) |
| /* Build the vector directly from ELTS. */ |
| init = gimple_build_vector (&ctor_seq, &elts); |
| else if (neutral_op) |
| { |
| /* Build a vector of the neutral value and shift the |
| other elements into place. */ |
| init = gimple_build_vector_from_val (&ctor_seq, vector_type, |
| neutral_op); |
| int k = nunits; |
| while (k > 0 && elts[k - 1] == neutral_op) |
| k -= 1; |
| while (k > 0) |
| { |
| k -= 1; |
| init = gimple_build (&ctor_seq, CFN_VEC_SHL_INSERT, |
| vector_type, init, elts[k]); |
| } |
| } |
| else |
| { |
| /* First time round, duplicate ELTS to fill the |
| required number of vectors. */ |
| duplicate_and_interleave (&ctor_seq, vector_type, elts, |
| number_of_vectors, *vec_oprnds); |
| break; |
| } |
| vec_oprnds->quick_push (init); |
| |
| number_of_places_left_in_vector = nunits; |
| elts.new_vector (vector_type, nunits, 1); |
| elts.quick_grow (nunits); |
| constant_p = true; |
| } |
| } |
| if (ctor_seq != NULL) |
| gsi_insert_seq_on_edge_immediate (pe, ctor_seq); |
| } |
| |
| |
| /* Function vect_create_epilog_for_reduction |
| |
| Create code at the loop-epilog to finalize the result of a reduction |
| computation. |
| |
| VECT_DEFS is list of vector of partial results, i.e., the lhs's of vector |
| reduction statements. |
| STMT_INFO is the scalar reduction stmt that is being vectorized. |
| NCOPIES is > 1 in case the vectorization factor (VF) is bigger than the |
| number of elements that we can fit in a vectype (nunits). In this case |
| we have to generate more than one vector stmt - i.e - we need to "unroll" |
| the vector stmt by a factor VF/nunits. For more details see documentation |
| in vectorizable_operation. |
| REDUC_FN is the internal function for the epilog reduction. |
| REDUCTION_PHIS is a list of the phi-nodes that carry the reduction |
| computation. |
| REDUC_INDEX is the index of the operand in the right hand side of the |
| statement that is defined by REDUCTION_PHI. |
| DOUBLE_REDUC is TRUE if double reduction phi nodes should be handled. |
| SLP_NODE is an SLP node containing a group of reduction statements. The |
| first one in this group is STMT_INFO. |
| INDUC_VAL is for INTEGER_INDUC_COND_REDUCTION the value to use for the case |
| when the COND_EXPR is never true in the loop. For MAX_EXPR, it needs to |
| be smaller than any value of the IV in the loop, for MIN_EXPR larger than |
| any value of the IV in the loop. |
| INDUC_CODE is the code for epilog reduction if INTEGER_INDUC_COND_REDUCTION. |
| NEUTRAL_OP is the value given by neutral_op_for_slp_reduction; it is |
| null if this is not an SLP reduction |
| |
| This function: |
| 1. Creates the reduction def-use cycles: sets the arguments for |
| REDUCTION_PHIS: |
| The loop-entry argument is the vectorized initial-value of the reduction. |
| The loop-latch argument is taken from VECT_DEFS - the vector of partial |
| sums. |
| 2. "Reduces" each vector of partial results VECT_DEFS into a single result, |
| by calling the function specified by REDUC_FN if available, or by |
| other means (whole-vector shifts or a scalar loop). |
| The function also creates a new phi node at the loop exit to preserve |
| loop-closed form, as illustrated below. |
| |
| The flow at the entry to this function: |
| |
| loop: |
| vec_def = phi <null, null> # REDUCTION_PHI |
| VECT_DEF = vector_stmt # vectorized form of STMT_INFO |
| s_loop = scalar_stmt # (scalar) STMT_INFO |
| loop_exit: |
| s_out0 = phi <s_loop> # (scalar) EXIT_PHI |
| use <s_out0> |
| use <s_out0> |
| |
| The above is transformed by this function into: |
| |
| loop: |
| vec_def = phi <vec_init, VECT_DEF> # REDUCTION_PHI |
| VECT_DEF = vector_stmt # vectorized form of STMT_INFO |
| s_loop = scalar_stmt # (scalar) STMT_INFO |
| loop_exit: |
| s_out0 = phi <s_loop> # (scalar) EXIT_PHI |
| v_out1 = phi <VECT_DEF> # NEW_EXIT_PHI |
| v_out2 = reduce <v_out1> |
| s_out3 = extract_field <v_out2, 0> |
| s_out4 = adjust_result <s_out3> |
| use <s_out4> |
| use <s_out4> |
| */ |
| |
| static void |
| vect_create_epilog_for_reduction (vec<tree> vect_defs, |
| stmt_vec_info stmt_info, |
| gimple *reduc_def_stmt, |
| int ncopies, internal_fn reduc_fn, |
| vec<stmt_vec_info> reduction_phis, |
| bool double_reduc, |
| slp_tree slp_node, |
| slp_instance slp_node_instance, |
| tree induc_val, enum tree_code induc_code, |
| tree neutral_op) |
| { |
| stmt_vec_info prev_phi_info; |
| tree vectype; |
| machine_mode mode; |
| loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info); |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo), *outer_loop = NULL; |
| basic_block exit_bb; |
| tree scalar_dest; |
| tree scalar_type; |
| gimple *new_phi = NULL, *phi; |
| stmt_vec_info phi_info; |
| gimple_stmt_iterator exit_gsi; |
| tree vec_dest; |
| tree new_temp = NULL_TREE, new_dest, new_name, new_scalar_dest; |
| gimple *epilog_stmt = NULL; |
| enum tree_code code = gimple_assign_rhs_code (stmt_info->stmt); |
| gimple *exit_phi; |
| tree bitsize; |
| tree adjustment_def = NULL; |
| tree vec_initial_def = NULL; |
| tree expr, def, initial_def = NULL; |
| tree orig_name, scalar_result; |
| imm_use_iterator imm_iter, phi_imm_iter; |
| use_operand_p use_p, phi_use_p; |
| gimple *use_stmt; |
| stmt_vec_info reduction_phi_info = NULL; |
| bool nested_in_vect_loop = false; |
| auto_vec<gimple *> new_phis; |
| auto_vec<stmt_vec_info> inner_phis; |
| int j, i; |
| auto_vec<tree> scalar_results; |
| unsigned int group_size = 1, k, ratio; |
| auto_vec<tree> vec_initial_defs; |
| auto_vec<gimple *> phis; |
| bool slp_reduc = false; |
| bool direct_slp_reduc; |
| tree new_phi_result; |
| stmt_vec_info inner_phi = NULL; |
| tree induction_index = NULL_TREE; |
| |
| if (slp_node) |
| group_size = SLP_TREE_SCALAR_STMTS (slp_node).length (); |
| |
| if (nested_in_vect_loop_p (loop, stmt_info)) |
| { |
| outer_loop = loop; |
| loop = loop->inner; |
| nested_in_vect_loop = true; |
| gcc_assert (!slp_node); |
| } |
| |
| vectype = STMT_VINFO_VECTYPE (stmt_info); |
| gcc_assert (vectype); |
| mode = TYPE_MODE (vectype); |
| |
| /* 1. Create the reduction def-use cycle: |
| Set the arguments of REDUCTION_PHIS, i.e., transform |
| |
| loop: |
| vec_def = phi <null, null> # REDUCTION_PHI |
| VECT_DEF = vector_stmt # vectorized form of STMT |
| ... |
| |
| into: |
| |
| loop: |
| vec_def = phi <vec_init, VECT_DEF> # REDUCTION_PHI |
| VECT_DEF = vector_stmt # vectorized form of STMT |
| ... |
| |
| (in case of SLP, do it for all the phis). */ |
| |
| /* Get the loop-entry arguments. */ |
| enum vect_def_type initial_def_dt = vect_unknown_def_type; |
| if (slp_node) |
| { |
| unsigned vec_num = SLP_TREE_NUMBER_OF_VEC_STMTS (slp_node); |
| vec_initial_defs.reserve (vec_num); |
| get_initial_defs_for_reduction (slp_node_instance->reduc_phis, |
| &vec_initial_defs, vec_num, |
| REDUC_GROUP_FIRST_ELEMENT (stmt_info), |
| neutral_op); |
| } |
| else |
| { |
| /* Get at the scalar def before the loop, that defines the initial value |
| of the reduction variable. */ |
| initial_def = PHI_ARG_DEF_FROM_EDGE (reduc_def_stmt, |
| loop_preheader_edge (loop)); |
| /* Optimize: if initial_def is for REDUC_MAX smaller than the base |
| and we can't use zero for induc_val, use initial_def. Similarly |
| for REDUC_MIN and initial_def larger than the base. */ |
| if (TREE_CODE (initial_def) == INTEGER_CST |
| && (STMT_VINFO_VEC_REDUCTION_TYPE (stmt_info) |
| == INTEGER_INDUC_COND_REDUCTION) |
| && !integer_zerop (induc_val) |
| && ((induc_code == MAX_EXPR |
| && tree_int_cst_lt (initial_def, induc_val)) |
| || (induc_code == MIN_EXPR |
| && tree_int_cst_lt (induc_val, initial_def)))) |
| induc_val = initial_def; |
| |
| if (double_reduc) |
| /* In case of double reduction we only create a vector variable |
| to be put in the reduction phi node. The actual statement |
| creation is done later in this function. */ |
| vec_initial_def = vect_create_destination_var (initial_def, vectype); |
| else if (nested_in_vect_loop) |
| { |
| /* Do not use an adjustment def as that case is not supported |
| correctly if ncopies is not one. */ |
| vect_is_simple_use (initial_def, loop_vinfo, &initial_def_dt); |
| vec_initial_def = vect_get_vec_def_for_operand (initial_def, |
| stmt_info); |
| } |
| else |
| vec_initial_def |
| = get_initial_def_for_reduction (stmt_info, initial_def, |
| &adjustment_def); |
| vec_initial_defs.create (1); |
| vec_initial_defs.quick_push (vec_initial_def); |
| } |
| |
| /* Set phi nodes arguments. */ |
| FOR_EACH_VEC_ELT (reduction_phis, i, phi_info) |
| { |
| tree vec_init_def = vec_initial_defs[i]; |
| tree def = vect_defs[i]; |
| for (j = 0; j < ncopies; j++) |
| { |
| if (j != 0) |
| { |
| phi_info = STMT_VINFO_RELATED_STMT (phi_info); |
| if (nested_in_vect_loop) |
| vec_init_def |
| = vect_get_vec_def_for_stmt_copy (loop_vinfo, vec_init_def); |
| } |
| |
| /* Set the loop-entry arg of the reduction-phi. */ |
| |
| gphi *phi = as_a <gphi *> (phi_info->stmt); |
| if (STMT_VINFO_VEC_REDUCTION_TYPE (stmt_info) |
| == INTEGER_INDUC_COND_REDUCTION) |
| { |
| /* Initialise the reduction phi to zero. This prevents initial |
| values of non-zero interferring with the reduction op. */ |
| gcc_assert (ncopies == 1); |
| gcc_assert (i == 0); |
| |
| tree vec_init_def_type = TREE_TYPE (vec_init_def); |
| tree induc_val_vec |
| = build_vector_from_val (vec_init_def_type, induc_val); |
| |
| add_phi_arg (phi, induc_val_vec, loop_preheader_edge (loop), |
| UNKNOWN_LOCATION); |
| } |
| else |
| add_phi_arg (phi, vec_init_def, loop_preheader_edge (loop), |
| UNKNOWN_LOCATION); |
| |
| /* Set the loop-latch arg for the reduction-phi. */ |
| if (j > 0) |
| def = vect_get_vec_def_for_stmt_copy (loop_vinfo, def); |
| |
| add_phi_arg (phi, def, loop_latch_edge (loop), UNKNOWN_LOCATION); |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "transform reduction: created def-use cycle: %G%G", |
| phi, SSA_NAME_DEF_STMT (def)); |
| } |
| } |
| |
| /* For cond reductions we want to create a new vector (INDEX_COND_EXPR) |
| which is updated with the current index of the loop for every match of |
| the original loop's cond_expr (VEC_STMT). This results in a vector |
| containing the last time the condition passed for that vector lane. |
| The first match will be a 1 to allow 0 to be used for non-matching |
| indexes. If there are no matches at all then the vector will be all |
| zeroes. */ |
| if (STMT_VINFO_VEC_REDUCTION_TYPE (stmt_info) == COND_REDUCTION) |
| { |
| tree indx_before_incr, indx_after_incr; |
| poly_uint64 nunits_out = TYPE_VECTOR_SUBPARTS (vectype); |
| |
| gimple *vec_stmt = STMT_VINFO_VEC_STMT (stmt_info)->stmt; |
| gcc_assert (gimple_assign_rhs_code (vec_stmt) == VEC_COND_EXPR); |
| |
| int scalar_precision |
| = GET_MODE_PRECISION (SCALAR_TYPE_MODE (TREE_TYPE (vectype))); |
| tree cr_index_scalar_type = make_unsigned_type (scalar_precision); |
| tree cr_index_vector_type = build_vector_type |
| (cr_index_scalar_type, TYPE_VECTOR_SUBPARTS (vectype)); |
| |
| /* First we create a simple vector induction variable which starts |
| with the values {1,2,3,...} (SERIES_VECT) and increments by the |
| vector size (STEP). */ |
| |
| /* Create a {1,2,3,...} vector. */ |
| tree series_vect = build_index_vector (cr_index_vector_type, 1, 1); |
| |
| /* Create a vector of the step value. */ |
| tree step = build_int_cst (cr_index_scalar_type, nunits_out); |
| tree vec_step = build_vector_from_val (cr_index_vector_type, step); |
| |
| /* Create an induction variable. */ |
| gimple_stmt_iterator incr_gsi; |
| bool insert_after; |
| standard_iv_increment_position (loop, &incr_gsi, &insert_after); |
| create_iv (series_vect, vec_step, NULL_TREE, loop, &incr_gsi, |
| insert_after, &indx_before_incr, &indx_after_incr); |
| |
| /* Next create a new phi node vector (NEW_PHI_TREE) which starts |
| filled with zeros (VEC_ZERO). */ |
| |
| /* Create a vector of 0s. */ |
| tree zero = build_zero_cst (cr_index_scalar_type); |
| tree vec_zero = build_vector_from_val (cr_index_vector_type, zero); |
| |
| /* Create a vector phi node. */ |
| tree new_phi_tree = make_ssa_name (cr_index_vector_type); |
| new_phi = create_phi_node (new_phi_tree, loop->header); |
| loop_vinfo->add_stmt (new_phi); |
| add_phi_arg (as_a <gphi *> (new_phi), vec_zero, |
| loop_preheader_edge (loop), UNKNOWN_LOCATION); |
| |
| /* Now take the condition from the loops original cond_expr |
| (VEC_STMT) and produce a new cond_expr (INDEX_COND_EXPR) which for |
| every match uses values from the induction variable |
| (INDEX_BEFORE_INCR) otherwise uses values from the phi node |
| (NEW_PHI_TREE). |
| Finally, we update the phi (NEW_PHI_TREE) to take the value of |
| the new cond_expr (INDEX_COND_EXPR). */ |
| |
| /* Duplicate the condition from vec_stmt. */ |
| tree ccompare = unshare_expr (gimple_assign_rhs1 (vec_stmt)); |
| |
| /* Create a conditional, where the condition is taken from vec_stmt |
| (CCOMPARE), then is the induction index (INDEX_BEFORE_INCR) and |
| else is the phi (NEW_PHI_TREE). */ |
| tree index_cond_expr = build3 (VEC_COND_EXPR, cr_index_vector_type, |
| ccompare, indx_before_incr, |
| new_phi_tree); |
| induction_index = make_ssa_name (cr_index_vector_type); |
| gimple *index_condition = gimple_build_assign (induction_index, |
| index_cond_expr); |
| gsi_insert_before (&incr_gsi, index_condition, GSI_SAME_STMT); |
| stmt_vec_info index_vec_info = loop_vinfo->add_stmt (index_condition); |
| STMT_VINFO_VECTYPE (index_vec_info) = cr_index_vector_type; |
| |
| /* Update the phi with the vec cond. */ |
| add_phi_arg (as_a <gphi *> (new_phi), induction_index, |
| loop_latch_edge (loop), UNKNOWN_LOCATION); |
| } |
| |
| /* 2. Create epilog code. |
| The reduction epilog code operates across the elements of the vector |
| of partial results computed by the vectorized loop. |
| The reduction epilog code consists of: |
| |
| step 1: compute the scalar result in a vector (v_out2) |
| step 2: extract the scalar result (s_out3) from the vector (v_out2) |
| step 3: adjust the scalar result (s_out3) if needed. |
| |
| Step 1 can be accomplished using one the following three schemes: |
| (scheme 1) using reduc_fn, if available. |
| (scheme 2) using whole-vector shifts, if available. |
| (scheme 3) using a scalar loop. In this case steps 1+2 above are |
| combined. |
| |
| The overall epilog code looks like this: |
| |
| s_out0 = phi <s_loop> # original EXIT_PHI |
| v_out1 = phi <VECT_DEF> # NEW_EXIT_PHI |
| v_out2 = reduce <v_out1> # step 1 |
| s_out3 = extract_field <v_out2, 0> # step 2 |
| s_out4 = adjust_result <s_out3> # step 3 |
| |
| (step 3 is optional, and steps 1 and 2 may be combined). |
| Lastly, the uses of s_out0 are replaced by s_out4. */ |
| |
| |
| /* 2.1 Create new loop-exit-phis to preserve loop-closed form: |
| v_out1 = phi <VECT_DEF> |
| Store them in NEW_PHIS. */ |
| |
| exit_bb = single_exit (loop)->dest; |
| prev_phi_info = NULL; |
| new_phis.create (vect_defs.length ()); |
| FOR_EACH_VEC_ELT (vect_defs, i, def) |
| { |
| for (j = 0; j < ncopies; j++) |
| { |
| tree new_def = copy_ssa_name (def); |
| phi = create_phi_node (new_def, exit_bb); |
| stmt_vec_info phi_info = loop_vinfo->add_stmt (phi); |
| if (j == 0) |
| new_phis.quick_push (phi); |
| else |
| { |
| def = vect_get_vec_def_for_stmt_copy (loop_vinfo, def); |
| STMT_VINFO_RELATED_STMT (prev_phi_info) = phi_info; |
| } |
| |
| SET_PHI_ARG_DEF (phi, single_exit (loop)->dest_idx, def); |
| prev_phi_info = phi_info; |
| } |
| } |
| |
| /* The epilogue is created for the outer-loop, i.e., for the loop being |
| vectorized. Create exit phis for the outer loop. */ |
| if (double_reduc) |
| { |
| loop = outer_loop; |
| exit_bb = single_exit (loop)->dest; |
| inner_phis.create (vect_defs.length ()); |
| FOR_EACH_VEC_ELT (new_phis, i, phi) |
| { |
| stmt_vec_info phi_info = loop_vinfo->lookup_stmt (phi); |
| tree new_result = copy_ssa_name (PHI_RESULT (phi)); |
| gphi *outer_phi = create_phi_node (new_result, exit_bb); |
| SET_PHI_ARG_DEF (outer_phi, single_exit (loop)->dest_idx, |
| PHI_RESULT (phi)); |
| prev_phi_info = loop_vinfo->add_stmt (outer_phi); |
| inner_phis.quick_push (phi_info); |
| new_phis[i] = outer_phi; |
| while (STMT_VINFO_RELATED_STMT (phi_info)) |
| { |
| phi_info = STMT_VINFO_RELATED_STMT (phi_info); |
| new_result = copy_ssa_name (PHI_RESULT (phi_info->stmt)); |
| outer_phi = create_phi_node (new_result, exit_bb); |
| SET_PHI_ARG_DEF (outer_phi, single_exit (loop)->dest_idx, |
| PHI_RESULT (phi_info->stmt)); |
| stmt_vec_info outer_phi_info = loop_vinfo->add_stmt (outer_phi); |
| STMT_VINFO_RELATED_STMT (prev_phi_info) = outer_phi_info; |
| prev_phi_info = outer_phi_info; |
| } |
| } |
| } |
| |
| exit_gsi = gsi_after_labels (exit_bb); |
| |
| /* 2.2 Get the relevant tree-code to use in the epilog for schemes 2,3 |
| (i.e. when reduc_fn is not available) and in the final adjustment |
| code (if needed). Also get the original scalar reduction variable as |
| defined in the loop. In case STMT is a "pattern-stmt" (i.e. - it |
| represents a reduction pattern), the tree-code and scalar-def are |
| taken from the original stmt that the pattern-stmt (STMT) replaces. |
| Otherwise (it is a regular reduction) - the tree-code and scalar-def |
| are taken from STMT. */ |
| |
| stmt_vec_info orig_stmt_info = vect_orig_stmt (stmt_info); |
| if (orig_stmt_info != stmt_info) |
| { |
| /* Reduction pattern */ |
| gcc_assert (STMT_VINFO_IN_PATTERN_P (orig_stmt_info)); |
| gcc_assert (STMT_VINFO_RELATED_STMT (orig_stmt_info) == stmt_info); |
| } |
| |
| code = gimple_assign_rhs_code (orig_stmt_info->stmt); |
| /* For MINUS_EXPR the initial vector is [init_val,0,...,0], therefore, |
| partial results are added and not subtracted. */ |
| if (code == MINUS_EXPR) |
| code = PLUS_EXPR; |
| |
| scalar_dest = gimple_assign_lhs (orig_stmt_info->stmt); |
| scalar_type = TREE_TYPE (scalar_dest); |
| scalar_results.create (group_size); |
| new_scalar_dest = vect_create_destination_var (scalar_dest, NULL); |
| bitsize = TYPE_SIZE (scalar_type); |
| |
| /* In case this is a reduction in an inner-loop while vectorizing an outer |
| loop - we don't need to extract a single scalar result at the end of the |
| inner-loop (unless it is double reduction, i.e., the use of reduction is |
| outside the outer-loop). The final vector of partial results will be used |
| in the vectorized outer-loop, or reduced to a scalar result at the end of |
| the outer-loop. */ |
| if (nested_in_vect_loop && !double_reduc) |
| goto vect_finalize_reduction; |
| |
| /* SLP reduction without reduction chain, e.g., |
| # a1 = phi <a2, a0> |
| # b1 = phi <b2, b0> |
| a2 = operation (a1) |
| b2 = operation (b1) */ |
| slp_reduc = (slp_node && !REDUC_GROUP_FIRST_ELEMENT (stmt_info)); |
| |
| /* True if we should implement SLP_REDUC using native reduction operations |
| instead of scalar operations. */ |
| direct_slp_reduc = (reduc_fn != IFN_LAST |
| && slp_reduc |
| && !TYPE_VECTOR_SUBPARTS (vectype).is_constant ()); |
| |
| /* In case of reduction chain, e.g., |
| # a1 = phi <a3, a0> |
| a2 = operation (a1) |
| a3 = operation (a2), |
| |
| we may end up with more than one vector result. Here we reduce them to |
| one vector. */ |
| if (REDUC_GROUP_FIRST_ELEMENT (stmt_info) || direct_slp_reduc) |
| { |
| tree first_vect = PHI_RESULT (new_phis[0]); |
| gassign *new_vec_stmt = NULL; |
| vec_dest = vect_create_destination_var (scalar_dest, vectype); |
| for (k = 1; k < new_phis.length (); k++) |
| { |
| gimple *next_phi = new_phis[k]; |
| tree second_vect = PHI_RESULT (next_phi); |
| tree tem = make_ssa_name (vec_dest, new_vec_stmt); |
| new_vec_stmt = gimple_build_assign (tem, code, |
| first_vect, second_vect); |
| gsi_insert_before (&exit_gsi, new_vec_stmt, GSI_SAME_STMT); |
| first_vect = tem; |
| } |
| |
| new_phi_result = first_vect; |
| if (new_vec_stmt) |
| { |
| new_phis.truncate (0); |
| new_phis.safe_push (new_vec_stmt); |
| } |
| } |
| /* Likewise if we couldn't use a single defuse cycle. */ |
| else if (ncopies > 1) |
| { |
| gcc_assert (new_phis.length () == 1); |
| tree first_vect = PHI_RESULT (new_phis[0]); |
| gassign *new_vec_stmt = NULL; |
| vec_dest = vect_create_destination_var (scalar_dest, vectype); |
| stmt_vec_info next_phi_info = loop_vinfo->lookup_stmt (new_phis[0]); |
| for (int k = 1; k < ncopies; ++k) |
| { |
| next_phi_info = STMT_VINFO_RELATED_STMT (next_phi_info); |
| tree second_vect = PHI_RESULT (next_phi_info->stmt); |
| tree tem = make_ssa_name (vec_dest, new_vec_stmt); |
| new_vec_stmt = gimple_build_assign (tem, code, |
| first_vect, second_vect); |
| gsi_insert_before (&exit_gsi, new_vec_stmt, GSI_SAME_STMT); |
| first_vect = tem; |
| } |
| new_phi_result = first_vect; |
| new_phis.truncate (0); |
| new_phis.safe_push (new_vec_stmt); |
| } |
| else |
| new_phi_result = PHI_RESULT (new_phis[0]); |
| |
| if (STMT_VINFO_VEC_REDUCTION_TYPE (stmt_info) == COND_REDUCTION |
| && reduc_fn != IFN_LAST) |
| { |
| /* For condition reductions, we have a vector (NEW_PHI_RESULT) containing |
| various data values where the condition matched and another vector |
| (INDUCTION_INDEX) containing all the indexes of those matches. We |
| need to extract the last matching index (which will be the index with |
| highest value) and use this to index into the data vector. |
| For the case where there were no matches, the data vector will contain |
| all default values and the index vector will be all zeros. */ |
| |
| /* Get various versions of the type of the vector of indexes. */ |
| tree index_vec_type = TREE_TYPE (induction_index); |
| gcc_checking_assert (TYPE_UNSIGNED (index_vec_type)); |
| tree index_scalar_type = TREE_TYPE (index_vec_type); |
| tree index_vec_cmp_type = build_same_sized_truth_vector_type |
| (index_vec_type); |
| |
| /* Get an unsigned integer version of the type of the data vector. */ |
| int scalar_precision |
| = GET_MODE_PRECISION (SCALAR_TYPE_MODE (scalar_type)); |
| tree scalar_type_unsigned = make_unsigned_type (scalar_precision); |
| tree vectype_unsigned = build_vector_type |
| (scalar_type_unsigned, TYPE_VECTOR_SUBPARTS (vectype)); |
| |
| /* First we need to create a vector (ZERO_VEC) of zeros and another |
| vector (MAX_INDEX_VEC) filled with the last matching index, which we |
| can create using a MAX reduction and then expanding. |
| In the case where the loop never made any matches, the max index will |
| be zero. */ |
| |
| /* Vector of {0, 0, 0,...}. */ |
| tree zero_vec = make_ssa_name (vectype); |
| tree zero_vec_rhs = build_zero_cst (vectype); |
| gimple *zero_vec_stmt = gimple_build_assign (zero_vec, zero_vec_rhs); |
| gsi_insert_before (&exit_gsi, zero_vec_stmt, GSI_SAME_STMT); |
| |
| /* Find maximum value from the vector of found indexes. */ |
| tree max_index = make_ssa_name (index_scalar_type); |
| gcall *max_index_stmt = gimple_build_call_internal (IFN_REDUC_MAX, |
| 1, induction_index); |
| gimple_call_set_lhs (max_index_stmt, max_index); |
| gsi_insert_before (&exit_gsi, max_index_stmt, GSI_SAME_STMT); |
| |
| /* Vector of {max_index, max_index, max_index,...}. */ |
| tree max_index_vec = make_ssa_name (index_vec_type); |
| tree max_index_vec_rhs = build_vector_from_val (index_vec_type, |
| max_index); |
| gimple *max_index_vec_stmt = gimple_build_assign (max_index_vec, |
| max_index_vec_rhs); |
| gsi_insert_before (&exit_gsi, max_index_vec_stmt, GSI_SAME_STMT); |
| |
| /* Next we compare the new vector (MAX_INDEX_VEC) full of max indexes |
| with the vector (INDUCTION_INDEX) of found indexes, choosing values |
| from the data vector (NEW_PHI_RESULT) for matches, 0 (ZERO_VEC) |
| otherwise. Only one value should match, resulting in a vector |
| (VEC_COND) with one data value and the rest zeros. |
| In the case where the loop never made any matches, every index will |
| match, resulting in a vector with all data values (which will all be |
| the default value). */ |
| |
| /* Compare the max index vector to the vector of found indexes to find |
| the position of the max value. */ |
| tree vec_compare = make_ssa_name (index_vec_cmp_type); |
| gimple *vec_compare_stmt = gimple_build_assign (vec_compare, EQ_EXPR, |
| induction_index, |
| max_index_vec); |
| gsi_insert_before (&exit_gsi, vec_compare_stmt, GSI_SAME_STMT); |
| |
| /* Use the compare to choose either values from the data vector or |
| zero. */ |
| tree vec_cond = make_ssa_name (vectype); |
| gimple *vec_cond_stmt = gimple_build_assign (vec_cond, VEC_COND_EXPR, |
| vec_compare, new_phi_result, |
| zero_vec); |
| gsi_insert_before (&exit_gsi, vec_cond_stmt, GSI_SAME_STMT); |
| |
| /* Finally we need to extract the data value from the vector (VEC_COND) |
| into a scalar (MATCHED_DATA_REDUC). Logically we want to do a OR |
| reduction, but because this doesn't exist, we can use a MAX reduction |
| instead. The data value might be signed or a float so we need to cast |
| it first. |
| In the case where the loop never made any matches, the data values are |
| all identical, and so will reduce down correctly. */ |
| |
| /* Make the matched data values unsigned. */ |
| tree vec_cond_cast = make_ssa_name (vectype_unsigned); |
| tree vec_cond_cast_rhs = build1 (VIEW_CONVERT_EXPR, vectype_unsigned, |
| vec_cond); |
| gimple *vec_cond_cast_stmt = gimple_build_assign (vec_cond_cast, |
| VIEW_CONVERT_EXPR, |
| vec_cond_cast_rhs); |
| gsi_insert_before (&exit_gsi, vec_cond_cast_stmt, GSI_SAME_STMT); |
| |
| /* Reduce down to a scalar value. */ |
| tree data_reduc = make_ssa_name (scalar_type_unsigned); |
| gcall *data_reduc_stmt = gimple_build_call_internal (IFN_REDUC_MAX, |
| 1, vec_cond_cast); |
| gimple_call_set_lhs (data_reduc_stmt, data_reduc); |
| gsi_insert_before (&exit_gsi, data_reduc_stmt, GSI_SAME_STMT); |
| |
| /* Convert the reduced value back to the result type and set as the |
| result. */ |
| gimple_seq stmts = NULL; |
| new_temp = gimple_build (&stmts, VIEW_CONVERT_EXPR, scalar_type, |
| data_reduc); |
| gsi_insert_seq_before (&exit_gsi, stmts, GSI_SAME_STMT); |
| scalar_results.safe_push (new_temp); |
| } |
| else if (STMT_VINFO_VEC_REDUCTION_TYPE (stmt_info) == COND_REDUCTION |
| && reduc_fn == IFN_LAST) |
| { |
| /* Condition reduction without supported IFN_REDUC_MAX. Generate |
| idx = 0; |
| idx_val = induction_index[0]; |
| val = data_reduc[0]; |
| for (idx = 0, val = init, i = 0; i < nelts; ++i) |
| if (induction_index[i] > idx_val) |
| val = data_reduc[i], idx_val = induction_index[i]; |
| return val; */ |
| |
| tree data_eltype = TREE_TYPE (TREE_TYPE (new_phi_result)); |
| tree idx_eltype = TREE_TYPE (TREE_TYPE (induction_index)); |
| unsigned HOST_WIDE_INT el_size = tree_to_uhwi (TYPE_SIZE (idx_eltype)); |
| poly_uint64 nunits = TYPE_VECTOR_SUBPARTS (TREE_TYPE (induction_index)); |
| /* Enforced by vectorizable_reduction, which ensures we have target |
| support before allowing a conditional reduction on variable-length |
| vectors. */ |
| unsigned HOST_WIDE_INT v_size = el_size * nunits.to_constant (); |
| tree idx_val = NULL_TREE, val = NULL_TREE; |
| for (unsigned HOST_WIDE_INT off = 0; off < v_size; off += el_size) |
| { |
| tree old_idx_val = idx_val; |
| tree old_val = val; |
| idx_val = make_ssa_name (idx_eltype); |
| epilog_stmt = gimple_build_assign (idx_val, BIT_FIELD_REF, |
| build3 (BIT_FIELD_REF, idx_eltype, |
| induction_index, |
| bitsize_int (el_size), |
| bitsize_int (off))); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| val = make_ssa_name (data_eltype); |
| epilog_stmt = gimple_build_assign (val, BIT_FIELD_REF, |
| build3 (BIT_FIELD_REF, |
| data_eltype, |
| new_phi_result, |
| bitsize_int (el_size), |
| bitsize_int (off))); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| if (off != 0) |
| { |
| tree new_idx_val = idx_val; |
| tree new_val = val; |
| if (off != v_size - el_size) |
| { |
| new_idx_val = make_ssa_name (idx_eltype); |
| epilog_stmt = gimple_build_assign (new_idx_val, |
| MAX_EXPR, idx_val, |
| old_idx_val); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| } |
| new_val = make_ssa_name (data_eltype); |
| epilog_stmt = gimple_build_assign (new_val, |
| COND_EXPR, |
| build2 (GT_EXPR, |
| boolean_type_node, |
| idx_val, |
| old_idx_val), |
| val, old_val); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| idx_val = new_idx_val; |
| val = new_val; |
| } |
| } |
| /* Convert the reduced value back to the result type and set as the |
| result. */ |
| gimple_seq stmts = NULL; |
| val = gimple_convert (&stmts, scalar_type, val); |
| gsi_insert_seq_before (&exit_gsi, stmts, GSI_SAME_STMT); |
| scalar_results.safe_push (val); |
| } |
| |
| /* 2.3 Create the reduction code, using one of the three schemes described |
| above. In SLP we simply need to extract all the elements from the |
| vector (without reducing them), so we use scalar shifts. */ |
| else if (reduc_fn != IFN_LAST && !slp_reduc) |
| { |
| tree tmp; |
| tree vec_elem_type; |
| |
| /* Case 1: Create: |
| v_out2 = reduc_expr <v_out1> */ |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Reduce using direct vector reduction.\n"); |
| |
| vec_elem_type = TREE_TYPE (TREE_TYPE (new_phi_result)); |
| if (!useless_type_conversion_p (scalar_type, vec_elem_type)) |
| { |
| tree tmp_dest |
| = vect_create_destination_var (scalar_dest, vec_elem_type); |
| epilog_stmt = gimple_build_call_internal (reduc_fn, 1, |
| new_phi_result); |
| gimple_set_lhs (epilog_stmt, tmp_dest); |
| new_temp = make_ssa_name (tmp_dest, epilog_stmt); |
| gimple_set_lhs (epilog_stmt, new_temp); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| |
| epilog_stmt = gimple_build_assign (new_scalar_dest, NOP_EXPR, |
| new_temp); |
| } |
| else |
| { |
| epilog_stmt = gimple_build_call_internal (reduc_fn, 1, |
| new_phi_result); |
| gimple_set_lhs (epilog_stmt, new_scalar_dest); |
| } |
| |
| new_temp = make_ssa_name (new_scalar_dest, epilog_stmt); |
| gimple_set_lhs (epilog_stmt, new_temp); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| |
| if ((STMT_VINFO_VEC_REDUCTION_TYPE (stmt_info) |
| == INTEGER_INDUC_COND_REDUCTION) |
| && !operand_equal_p (initial_def, induc_val, 0)) |
| { |
| /* Earlier we set the initial value to be a vector if induc_val |
| values. Check the result and if it is induc_val then replace |
| with the original initial value, unless induc_val is |
| the same as initial_def already. */ |
| tree zcompare = build2 (EQ_EXPR, boolean_type_node, new_temp, |
| induc_val); |
| |
| tmp = make_ssa_name (new_scalar_dest); |
| epilog_stmt = gimple_build_assign (tmp, COND_EXPR, zcompare, |
| initial_def, new_temp); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| new_temp = tmp; |
| } |
| |
| scalar_results.safe_push (new_temp); |
| } |
| else if (direct_slp_reduc) |
| { |
| /* Here we create one vector for each of the REDUC_GROUP_SIZE results, |
| with the elements for other SLP statements replaced with the |
| neutral value. We can then do a normal reduction on each vector. */ |
| |
| /* Enforced by vectorizable_reduction. */ |
| gcc_assert (new_phis.length () == 1); |
| gcc_assert (pow2p_hwi (group_size)); |
| |
| slp_tree orig_phis_slp_node = slp_node_instance->reduc_phis; |
| vec<stmt_vec_info> orig_phis |
| = SLP_TREE_SCALAR_STMTS (orig_phis_slp_node); |
| gimple_seq seq = NULL; |
| |
| /* Build a vector {0, 1, 2, ...}, with the same number of elements |
| and the same element size as VECTYPE. */ |
| tree index = build_index_vector (vectype, 0, 1); |
| tree index_type = TREE_TYPE (index); |
| tree index_elt_type = TREE_TYPE (index_type); |
| tree mask_type = build_same_sized_truth_vector_type (index_type); |
| |
| /* Create a vector that, for each element, identifies which of |
| the REDUC_GROUP_SIZE results should use it. */ |
| tree index_mask = build_int_cst (index_elt_type, group_size - 1); |
| index = gimple_build (&seq, BIT_AND_EXPR, index_type, index, |
| build_vector_from_val (index_type, index_mask)); |
| |
| /* Get a neutral vector value. This is simply a splat of the neutral |
| scalar value if we have one, otherwise the initial scalar value |
| is itself a neutral value. */ |
| tree vector_identity = NULL_TREE; |
| if (neutral_op) |
| vector_identity = gimple_build_vector_from_val (&seq, vectype, |
| neutral_op); |
| for (unsigned int i = 0; i < group_size; ++i) |
| { |
| /* If there's no univeral neutral value, we can use the |
| initial scalar value from the original PHI. This is used |
| for MIN and MAX reduction, for example. */ |
| if (!neutral_op) |
| { |
| tree scalar_value |
| = PHI_ARG_DEF_FROM_EDGE (orig_phis[i]->stmt, |
| loop_preheader_edge (loop)); |
| vector_identity = gimple_build_vector_from_val (&seq, vectype, |
| scalar_value); |
| } |
| |
| /* Calculate the equivalent of: |
| |
| sel[j] = (index[j] == i); |
| |
| which selects the elements of NEW_PHI_RESULT that should |
| be included in the result. */ |
| tree compare_val = build_int_cst (index_elt_type, i); |
| compare_val = build_vector_from_val (index_type, compare_val); |
| tree sel = gimple_build (&seq, EQ_EXPR, mask_type, |
| index, compare_val); |
| |
| /* Calculate the equivalent of: |
| |
| vec = seq ? new_phi_result : vector_identity; |
| |
| VEC is now suitable for a full vector reduction. */ |
| tree vec = gimple_build (&seq, VEC_COND_EXPR, vectype, |
| sel, new_phi_result, vector_identity); |
| |
| /* Do the reduction and convert it to the appropriate type. */ |
| tree scalar = gimple_build (&seq, as_combined_fn (reduc_fn), |
| TREE_TYPE (vectype), vec); |
| scalar = gimple_convert (&seq, scalar_type, scalar); |
| scalar_results.safe_push (scalar); |
| } |
| gsi_insert_seq_before (&exit_gsi, seq, GSI_SAME_STMT); |
| } |
| else |
| { |
| bool reduce_with_shift; |
| tree vec_temp; |
| |
| /* COND reductions all do the final reduction with MAX_EXPR |
| or MIN_EXPR. */ |
| if (code == COND_EXPR) |
| { |
| if (STMT_VINFO_VEC_REDUCTION_TYPE (stmt_info) |
| == INTEGER_INDUC_COND_REDUCTION) |
| code = induc_code; |
| else if (STMT_VINFO_VEC_REDUCTION_TYPE (stmt_info) |
| == CONST_COND_REDUCTION) |
| code = STMT_VINFO_VEC_CONST_COND_REDUC_CODE (stmt_info); |
| else |
| code = MAX_EXPR; |
| } |
| |
| /* See if the target wants to do the final (shift) reduction |
| in a vector mode of smaller size and first reduce upper/lower |
| halves against each other. */ |
| enum machine_mode mode1 = mode; |
| tree vectype1 = vectype; |
| unsigned sz = tree_to_uhwi (TYPE_SIZE_UNIT (vectype)); |
| unsigned sz1 = sz; |
| if (!slp_reduc |
| && (mode1 = targetm.vectorize.split_reduction (mode)) != mode) |
| sz1 = GET_MODE_SIZE (mode1).to_constant (); |
| |
| vectype1 = get_vectype_for_scalar_type_and_size (scalar_type, sz1); |
| reduce_with_shift = have_whole_vector_shift (mode1); |
| if (!VECTOR_MODE_P (mode1)) |
| reduce_with_shift = false; |
| else |
| { |
| optab optab = optab_for_tree_code (code, vectype1, optab_default); |
| if (optab_handler (optab, mode1) == CODE_FOR_nothing) |
| reduce_with_shift = false; |
| } |
| |
| /* First reduce the vector to the desired vector size we should |
| do shift reduction on by combining upper and lower halves. */ |
| new_temp = new_phi_result; |
| while (sz > sz1) |
| { |
| gcc_assert (!slp_reduc); |
| sz /= 2; |
| vectype1 = get_vectype_for_scalar_type_and_size (scalar_type, sz); |
| |
| /* The target has to make sure we support lowpart/highpart |
| extraction, either via direct vector extract or through |
| an integer mode punning. */ |
| tree dst1, dst2; |
| if (convert_optab_handler (vec_extract_optab, |
| TYPE_MODE (TREE_TYPE (new_temp)), |
| TYPE_MODE (vectype1)) |
| != CODE_FOR_nothing) |
| { |
| /* Extract sub-vectors directly once vec_extract becomes |
| a conversion optab. */ |
| dst1 = make_ssa_name (vectype1); |
| epilog_stmt |
| = gimple_build_assign (dst1, BIT_FIELD_REF, |
| build3 (BIT_FIELD_REF, vectype1, |
| new_temp, TYPE_SIZE (vectype1), |
| bitsize_int (0))); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| dst2 = make_ssa_name (vectype1); |
| epilog_stmt |
| = gimple_build_assign (dst2, BIT_FIELD_REF, |
| build3 (BIT_FIELD_REF, vectype1, |
| new_temp, TYPE_SIZE (vectype1), |
| bitsize_int (sz * BITS_PER_UNIT))); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| } |
| else |
| { |
| /* Extract via punning to appropriately sized integer mode |
| vector. */ |
| tree eltype = build_nonstandard_integer_type (sz * BITS_PER_UNIT, |
| 1); |
| tree etype = build_vector_type (eltype, 2); |
| gcc_assert (convert_optab_handler (vec_extract_optab, |
| TYPE_MODE (etype), |
| TYPE_MODE (eltype)) |
| != CODE_FOR_nothing); |
| tree tem = make_ssa_name (etype); |
| epilog_stmt = gimple_build_assign (tem, VIEW_CONVERT_EXPR, |
| build1 (VIEW_CONVERT_EXPR, |
| etype, new_temp)); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| new_temp = tem; |
| tem = make_ssa_name (eltype); |
| epilog_stmt |
| = gimple_build_assign (tem, BIT_FIELD_REF, |
| build3 (BIT_FIELD_REF, eltype, |
| new_temp, TYPE_SIZE (eltype), |
| bitsize_int (0))); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| dst1 = make_ssa_name (vectype1); |
| epilog_stmt = gimple_build_assign (dst1, VIEW_CONVERT_EXPR, |
| build1 (VIEW_CONVERT_EXPR, |
| vectype1, tem)); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| tem = make_ssa_name (eltype); |
| epilog_stmt |
| = gimple_build_assign (tem, BIT_FIELD_REF, |
| build3 (BIT_FIELD_REF, eltype, |
| new_temp, TYPE_SIZE (eltype), |
| bitsize_int (sz * BITS_PER_UNIT))); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| dst2 = make_ssa_name (vectype1); |
| epilog_stmt = gimple_build_assign (dst2, VIEW_CONVERT_EXPR, |
| build1 (VIEW_CONVERT_EXPR, |
| vectype1, tem)); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| } |
| |
| new_temp = make_ssa_name (vectype1); |
| epilog_stmt = gimple_build_assign (new_temp, code, dst1, dst2); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| } |
| |
| if (reduce_with_shift && !slp_reduc) |
| { |
| int element_bitsize = tree_to_uhwi (bitsize); |
| /* Enforced by vectorizable_reduction, which disallows SLP reductions |
| for variable-length vectors and also requires direct target support |
| for loop reductions. */ |
| int vec_size_in_bits = tree_to_uhwi (TYPE_SIZE (vectype1)); |
| int nelements = vec_size_in_bits / element_bitsize; |
| vec_perm_builder sel; |
| vec_perm_indices indices; |
| |
| int elt_offset; |
| |
| tree zero_vec = build_zero_cst (vectype1); |
| /* Case 2: Create: |
| for (offset = nelements/2; offset >= 1; offset/=2) |
| { |
| Create: va' = vec_shift <va, offset> |
| Create: va = vop <va, va'> |
| } */ |
| |
| tree rhs; |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Reduce using vector shifts\n"); |
| |
| mode1 = TYPE_MODE (vectype1); |
| vec_dest = vect_create_destination_var (scalar_dest, vectype1); |
| for (elt_offset = nelements / 2; |
| elt_offset >= 1; |
| elt_offset /= 2) |
| { |
| calc_vec_perm_mask_for_shift (elt_offset, nelements, &sel); |
| indices.new_vector (sel, 2, nelements); |
| tree mask = vect_gen_perm_mask_any (vectype1, indices); |
| epilog_stmt = gimple_build_assign (vec_dest, VEC_PERM_EXPR, |
| new_temp, zero_vec, mask); |
| new_name = make_ssa_name (vec_dest, epilog_stmt); |
| gimple_assign_set_lhs (epilog_stmt, new_name); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| |
| epilog_stmt = gimple_build_assign (vec_dest, code, new_name, |
| new_temp); |
| new_temp = make_ssa_name (vec_dest, epilog_stmt); |
| gimple_assign_set_lhs (epilog_stmt, new_temp); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| } |
| |
| /* 2.4 Extract the final scalar result. Create: |
| s_out3 = extract_field <v_out2, bitpos> */ |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "extract scalar result\n"); |
| |
| rhs = build3 (BIT_FIELD_REF, scalar_type, new_temp, |
| bitsize, bitsize_zero_node); |
| epilog_stmt = gimple_build_assign (new_scalar_dest, rhs); |
| new_temp = make_ssa_name (new_scalar_dest, epilog_stmt); |
| gimple_assign_set_lhs (epilog_stmt, new_temp); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| scalar_results.safe_push (new_temp); |
| } |
| else |
| { |
| /* Case 3: Create: |
| s = extract_field <v_out2, 0> |
| for (offset = element_size; |
| offset < vector_size; |
| offset += element_size;) |
| { |
| Create: s' = extract_field <v_out2, offset> |
| Create: s = op <s, s'> // For non SLP cases |
| } */ |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Reduce using scalar code.\n"); |
| |
| int vec_size_in_bits = tree_to_uhwi (TYPE_SIZE (vectype1)); |
| int element_bitsize = tree_to_uhwi (bitsize); |
| FOR_EACH_VEC_ELT (new_phis, i, new_phi) |
| { |
| int bit_offset; |
| if (gimple_code (new_phi) == GIMPLE_PHI) |
| vec_temp = PHI_RESULT (new_phi); |
| else |
| vec_temp = gimple_assign_lhs (new_phi); |
| tree rhs = build3 (BIT_FIELD_REF, scalar_type, vec_temp, bitsize, |
| bitsize_zero_node); |
| epilog_stmt = gimple_build_assign (new_scalar_dest, rhs); |
| new_temp = make_ssa_name (new_scalar_dest, epilog_stmt); |
| gimple_assign_set_lhs (epilog_stmt, new_temp); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| |
| /* In SLP we don't need to apply reduction operation, so we just |
| collect s' values in SCALAR_RESULTS. */ |
| if (slp_reduc) |
| scalar_results.safe_push (new_temp); |
| |
| for (bit_offset = element_bitsize; |
| bit_offset < vec_size_in_bits; |
| bit_offset += element_bitsize) |
| { |
| tree bitpos = bitsize_int (bit_offset); |
| tree rhs = build3 (BIT_FIELD_REF, scalar_type, vec_temp, |
| bitsize, bitpos); |
| |
| epilog_stmt = gimple_build_assign (new_scalar_dest, rhs); |
| new_name = make_ssa_name (new_scalar_dest, epilog_stmt); |
| gimple_assign_set_lhs (epilog_stmt, new_name); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| |
| if (slp_reduc) |
| { |
| /* In SLP we don't need to apply reduction operation, so |
| we just collect s' values in SCALAR_RESULTS. */ |
| new_temp = new_name; |
| scalar_results.safe_push (new_name); |
| } |
| else |
| { |
| epilog_stmt = gimple_build_assign (new_scalar_dest, code, |
| new_name, new_temp); |
| new_temp = make_ssa_name (new_scalar_dest, epilog_stmt); |
| gimple_assign_set_lhs (epilog_stmt, new_temp); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| } |
| } |
| } |
| |
| /* The only case where we need to reduce scalar results in SLP, is |
| unrolling. If the size of SCALAR_RESULTS is greater than |
| REDUC_GROUP_SIZE, we reduce them combining elements modulo |
| REDUC_GROUP_SIZE. */ |
| if (slp_reduc) |
| { |
| tree res, first_res, new_res; |
| gimple *new_stmt; |
| |
| /* Reduce multiple scalar results in case of SLP unrolling. */ |
| for (j = group_size; scalar_results.iterate (j, &res); |
| j++) |
| { |
| first_res = scalar_results[j % group_size]; |
| new_stmt = gimple_build_assign (new_scalar_dest, code, |
| first_res, res); |
| new_res = make_ssa_name (new_scalar_dest, new_stmt); |
| gimple_assign_set_lhs (new_stmt, new_res); |
| gsi_insert_before (&exit_gsi, new_stmt, GSI_SAME_STMT); |
| scalar_results[j % group_size] = new_res; |
| } |
| } |
| else |
| /* Not SLP - we have one scalar to keep in SCALAR_RESULTS. */ |
| scalar_results.safe_push (new_temp); |
| } |
| |
| if ((STMT_VINFO_VEC_REDUCTION_TYPE (stmt_info) |
| == INTEGER_INDUC_COND_REDUCTION) |
| && !operand_equal_p (initial_def, induc_val, 0)) |
| { |
| /* Earlier we set the initial value to be a vector if induc_val |
| values. Check the result and if it is induc_val then replace |
| with the original initial value, unless induc_val is |
| the same as initial_def already. */ |
| tree zcompare = build2 (EQ_EXPR, boolean_type_node, new_temp, |
| induc_val); |
| |
| tree tmp = make_ssa_name (new_scalar_dest); |
| epilog_stmt = gimple_build_assign (tmp, COND_EXPR, zcompare, |
| initial_def, new_temp); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| scalar_results[0] = tmp; |
| } |
| } |
| |
| vect_finalize_reduction: |
| |
| if (double_reduc) |
| loop = loop->inner; |
| |
| /* 2.5 Adjust the final result by the initial value of the reduction |
| variable. (When such adjustment is not needed, then |
| 'adjustment_def' is zero). For example, if code is PLUS we create: |
| new_temp = loop_exit_def + adjustment_def */ |
| |
| if (adjustment_def) |
| { |
| gcc_assert (!slp_reduc); |
| if (nested_in_vect_loop) |
| { |
| new_phi = new_phis[0]; |
| gcc_assert (TREE_CODE (TREE_TYPE (adjustment_def)) == VECTOR_TYPE); |
| expr = build2 (code, vectype, PHI_RESULT (new_phi), adjustment_def); |
| new_dest = vect_create_destination_var (scalar_dest, vectype); |
| } |
| else |
| { |
| new_temp = scalar_results[0]; |
| gcc_assert (TREE_CODE (TREE_TYPE (adjustment_def)) != VECTOR_TYPE); |
| expr = build2 (code, scalar_type, new_temp, adjustment_def); |
| new_dest = vect_create_destination_var (scalar_dest, scalar_type); |
| } |
| |
| epilog_stmt = gimple_build_assign (new_dest, expr); |
| new_temp = make_ssa_name (new_dest, epilog_stmt); |
| gimple_assign_set_lhs (epilog_stmt, new_temp); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| if (nested_in_vect_loop) |
| { |
| stmt_vec_info epilog_stmt_info = loop_vinfo->add_stmt (epilog_stmt); |
| STMT_VINFO_RELATED_STMT (epilog_stmt_info) |
| = STMT_VINFO_RELATED_STMT (loop_vinfo->lookup_stmt (new_phi)); |
| |
| if (!double_reduc) |
| scalar_results.quick_push (new_temp); |
| else |
| scalar_results[0] = new_temp; |
| } |
| else |
| scalar_results[0] = new_temp; |
| |
| new_phis[0] = epilog_stmt; |
| } |
| |
| /* 2.6 Handle the loop-exit phis. Replace the uses of scalar loop-exit |
| phis with new adjusted scalar results, i.e., replace use <s_out0> |
| with use <s_out4>. |
| |
| Transform: |
| loop_exit: |
| s_out0 = phi <s_loop> # (scalar) EXIT_PHI |
| v_out1 = phi <VECT_DEF> # NEW_EXIT_PHI |
| v_out2 = reduce <v_out1> |
| s_out3 = extract_field <v_out2, 0> |
| s_out4 = adjust_result <s_out3> |
| use <s_out0> |
| use <s_out0> |
| |
| into: |
| |
| loop_exit: |
| s_out0 = phi <s_loop> # (scalar) EXIT_PHI |
| v_out1 = phi <VECT_DEF> # NEW_EXIT_PHI |
| v_out2 = reduce <v_out1> |
| s_out3 = extract_field <v_out2, 0> |
| s_out4 = adjust_result <s_out3> |
| use <s_out4> |
| use <s_out4> */ |
| |
| |
| /* In SLP reduction chain we reduce vector results into one vector if |
| necessary, hence we set here REDUC_GROUP_SIZE to 1. SCALAR_DEST is the |
| LHS of the last stmt in the reduction chain, since we are looking for |
| the loop exit phi node. */ |
| if (REDUC_GROUP_FIRST_ELEMENT (stmt_info)) |
| { |
| stmt_vec_info dest_stmt_info |
| = vect_orig_stmt (SLP_TREE_SCALAR_STMTS (slp_node)[group_size - 1]); |
| scalar_dest = gimple_assign_lhs (dest_stmt_info->stmt); |
| group_size = 1; |
| } |
| |
| /* In SLP we may have several statements in NEW_PHIS and REDUCTION_PHIS (in |
| case that REDUC_GROUP_SIZE is greater than vectorization factor). |
| Therefore, we need to match SCALAR_RESULTS with corresponding statements. |
| The first (REDUC_GROUP_SIZE / number of new vector stmts) scalar results |
| correspond to the first vector stmt, etc. |
| (RATIO is equal to (REDUC_GROUP_SIZE / number of new vector stmts)). */ |
| if (group_size > new_phis.length ()) |
| { |
| ratio = group_size / new_phis.length (); |
| gcc_assert (!(group_size % new_phis.length ())); |
| } |
| else |
| ratio = 1; |
| |
| stmt_vec_info epilog_stmt_info = NULL; |
| for (k = 0; k < group_size; k++) |
| { |
| if (k % ratio == 0) |
| { |
| epilog_stmt_info = loop_vinfo->lookup_stmt (new_phis[k / ratio]); |
| reduction_phi_info = reduction_phis[k / ratio]; |
| if (double_reduc) |
| inner_phi = inner_phis[k / ratio]; |
| } |
| |
| if (slp_reduc) |
| { |
| stmt_vec_info scalar_stmt_info = SLP_TREE_SCALAR_STMTS (slp_node)[k]; |
| |
| orig_stmt_info = STMT_VINFO_RELATED_STMT (scalar_stmt_info); |
| /* SLP statements can't participate in patterns. */ |
| gcc_assert (!orig_stmt_info); |
| scalar_dest = gimple_assign_lhs (scalar_stmt_info->stmt); |
| } |
| |
| phis.create (3); |
| /* Find the loop-closed-use at the loop exit of the original scalar |
| result. (The reduction result is expected to have two immediate uses - |
| one at the latch block, and one at the loop exit). */ |
| FOR_EACH_IMM_USE_FAST (use_p, imm_iter, scalar_dest) |
| if (!flow_bb_inside_loop_p (loop, gimple_bb (USE_STMT (use_p))) |
| && !is_gimple_debug (USE_STMT (use_p))) |
| phis.safe_push (USE_STMT (use_p)); |
| |
| /* While we expect to have found an exit_phi because of loop-closed-ssa |
| form we can end up without one if the scalar cycle is dead. */ |
| |
| FOR_EACH_VEC_ELT (phis, i, exit_phi) |
| { |
| if (outer_loop) |
| { |
| stmt_vec_info exit_phi_vinfo |
| = loop_vinfo->lookup_stmt (exit_phi); |
| gphi *vect_phi; |
| |
| if (double_reduc) |
| STMT_VINFO_VEC_STMT (exit_phi_vinfo) = inner_phi; |
| else |
| STMT_VINFO_VEC_STMT (exit_phi_vinfo) = epilog_stmt_info; |
| if (!double_reduc |
| || STMT_VINFO_DEF_TYPE (exit_phi_vinfo) |
| != vect_double_reduction_def) |
| continue; |
| |
| /* Handle double reduction: |
| |
| stmt1: s1 = phi <s0, s2> - double reduction phi (outer loop) |
| stmt2: s3 = phi <s1, s4> - (regular) reduc phi (inner loop) |
| stmt3: s4 = use (s3) - (regular) reduc stmt (inner loop) |
| stmt4: s2 = phi <s4> - double reduction stmt (outer loop) |
| |
| At that point the regular reduction (stmt2 and stmt3) is |
| already vectorized, as well as the exit phi node, stmt4. |
| Here we vectorize the phi node of double reduction, stmt1, and |
| update all relevant statements. */ |
| |
| /* Go through all the uses of s2 to find double reduction phi |
| node, i.e., stmt1 above. */ |
| orig_name = PHI_RESULT (exit_phi); |
| FOR_EACH_IMM_USE_STMT (use_stmt, imm_iter, orig_name) |
| { |
| stmt_vec_info use_stmt_vinfo; |
| tree vect_phi_init, preheader_arg, vect_phi_res; |
| basic_block bb = gimple_bb (use_stmt); |
| |
| /* Check that USE_STMT is really double reduction phi |
| node. */ |
| if (gimple_code (use_stmt) != GIMPLE_PHI |
| || gimple_phi_num_args (use_stmt) != 2 |
| || bb->loop_father != outer_loop) |
| continue; |
| use_stmt_vinfo = loop_vinfo->lookup_stmt (use_stmt); |
| if (!use_stmt_vinfo |
| || STMT_VINFO_DEF_TYPE (use_stmt_vinfo) |
| != vect_double_reduction_def) |
| continue; |
| |
| /* Create vector phi node for double reduction: |
| vs1 = phi <vs0, vs2> |
| vs1 was created previously in this function by a call to |
| vect_get_vec_def_for_operand and is stored in |
| vec_initial_def; |
| vs2 is defined by INNER_PHI, the vectorized EXIT_PHI; |
| vs0 is created here. */ |
| |
| /* Create vector phi node. */ |
| vect_phi = create_phi_node (vec_initial_def, bb); |
| loop_vec_info_for_loop (outer_loop)->add_stmt (vect_phi); |
| |
| /* Create vs0 - initial def of the double reduction phi. */ |
| preheader_arg = PHI_ARG_DEF_FROM_EDGE (use_stmt, |
| loop_preheader_edge (outer_loop)); |
| vect_phi_init = get_initial_def_for_reduction |
| (stmt_info, preheader_arg, NULL); |
| |
| /* Update phi node arguments with vs0 and vs2. */ |
| add_phi_arg (vect_phi, vect_phi_init, |
| loop_preheader_edge (outer_loop), |
| UNKNOWN_LOCATION); |
| add_phi_arg (vect_phi, PHI_RESULT (inner_phi->stmt), |
| loop_latch_edge (outer_loop), UNKNOWN_LOCATION); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "created double reduction phi node: %G", |
| vect_phi); |
| |
| vect_phi_res = PHI_RESULT (vect_phi); |
| |
| /* Replace the use, i.e., set the correct vs1 in the regular |
| reduction phi node. FORNOW, NCOPIES is always 1, so the |
| loop is redundant. */ |
| stmt_vec_info use_info = reduction_phi_info; |
| for (j = 0; j < ncopies; j++) |
| { |
| edge pr_edge = loop_preheader_edge (loop); |
| SET_PHI_ARG_DEF (as_a <gphi *> (use_info->stmt), |
| pr_edge->dest_idx, vect_phi_res); |
| use_info = STMT_VINFO_RELATED_STMT (use_info); |
| } |
| } |
| } |
| } |
| |
| phis.release (); |
| if (nested_in_vect_loop) |
| { |
| if (double_reduc) |
| loop = outer_loop; |
| else |
| continue; |
| } |
| |
| phis.create (3); |
| /* Find the loop-closed-use at the loop exit of the original scalar |
| result. (The reduction result is expected to have two immediate uses, |
| one at the latch block, and one at the loop exit). For double |
| reductions we are looking for exit phis of the outer loop. */ |
| FOR_EACH_IMM_USE_FAST (use_p, imm_iter, scalar_dest) |
| { |
| if (!flow_bb_inside_loop_p (loop, gimple_bb (USE_STMT (use_p)))) |
| { |
| if (!is_gimple_debug (USE_STMT (use_p))) |
| phis.safe_push (USE_STMT (use_p)); |
| } |
| else |
| { |
| if (double_reduc && gimple_code (USE_STMT (use_p)) == GIMPLE_PHI) |
| { |
| tree phi_res = PHI_RESULT (USE_STMT (use_p)); |
| |
| FOR_EACH_IMM_USE_FAST (phi_use_p, phi_imm_iter, phi_res) |
| { |
| if (!flow_bb_inside_loop_p (loop, |
| gimple_bb (USE_STMT (phi_use_p))) |
| && !is_gimple_debug (USE_STMT (phi_use_p))) |
| phis.safe_push (USE_STMT (phi_use_p)); |
| } |
| } |
| } |
| } |
| |
| FOR_EACH_VEC_ELT (phis, i, exit_phi) |
| { |
| /* Replace the uses: */ |
| orig_name = PHI_RESULT (exit_phi); |
| scalar_result = scalar_results[k]; |
| FOR_EACH_IMM_USE_STMT (use_stmt, imm_iter, orig_name) |
| FOR_EACH_IMM_USE_ON_STMT (use_p, imm_iter) |
| SET_USE (use_p, scalar_result); |
| } |
| |
| phis.release (); |
| } |
| } |
| |
| /* Return a vector of type VECTYPE that is equal to the vector select |
| operation "MASK ? VEC : IDENTITY". Insert the select statements |
| before GSI. */ |
| |
| static tree |
| merge_with_identity (gimple_stmt_iterator *gsi, tree mask, tree vectype, |
| tree vec, tree identity) |
| { |
| tree cond = make_temp_ssa_name (vectype, NULL, "cond"); |
| gimple *new_stmt = gimple_build_assign (cond, VEC_COND_EXPR, |
| mask, vec, identity); |
| gsi_insert_before (gsi, new_stmt, GSI_SAME_STMT); |
| return cond; |
| } |
| |
| /* Successively apply CODE to each element of VECTOR_RHS, in left-to-right |
| order, starting with LHS. Insert the extraction statements before GSI and |
| associate the new scalar SSA names with variable SCALAR_DEST. |
| Return the SSA name for the result. */ |
| |
| static tree |
| vect_expand_fold_left (gimple_stmt_iterator *gsi, tree scalar_dest, |
| tree_code code, tree lhs, tree vector_rhs) |
| { |
| tree vectype = TREE_TYPE (vector_rhs); |
| tree scalar_type = TREE_TYPE (vectype); |
| tree bitsize = TYPE_SIZE (scalar_type); |
| unsigned HOST_WIDE_INT vec_size_in_bits = tree_to_uhwi (TYPE_SIZE (vectype)); |
| unsigned HOST_WIDE_INT element_bitsize = tree_to_uhwi (bitsize); |
| |
| for (unsigned HOST_WIDE_INT bit_offset = 0; |
| bit_offset < vec_size_in_bits; |
| bit_offset += element_bitsize) |
| { |
| tree bitpos = bitsize_int (bit_offset); |
| tree rhs = build3 (BIT_FIELD_REF, scalar_type, vector_rhs, |
| bitsize, bitpos); |
| |
| gassign *stmt = gimple_build_assign (scalar_dest, rhs); |
| rhs = make_ssa_name (scalar_dest, stmt); |
| gimple_assign_set_lhs (stmt, rhs); |
| gsi_insert_before (gsi, stmt, GSI_SAME_STMT); |
| |
| stmt = gimple_build_assign (scalar_dest, code, lhs, rhs); |
| tree new_name = make_ssa_name (scalar_dest, stmt); |
| gimple_assign_set_lhs (stmt, new_name); |
| gsi_insert_before (gsi, stmt, GSI_SAME_STMT); |
| lhs = new_name; |
| } |
| return lhs; |
| } |
| |
| /* Get a masked internal function equivalent to REDUC_FN. VECTYPE_IN is the |
| type of the vector input. */ |
| |
| static internal_fn |
| get_masked_reduction_fn (internal_fn reduc_fn, tree vectype_in) |
| { |
| internal_fn mask_reduc_fn; |
| |
| switch (reduc_fn) |
| { |
| case IFN_FOLD_LEFT_PLUS: |
| mask_reduc_fn = IFN_MASK_FOLD_LEFT_PLUS; |
| break; |
| |
| default: |
| return IFN_LAST; |
| } |
| |
| if (direct_internal_fn_supported_p (mask_reduc_fn, vectype_in, |
| OPTIMIZE_FOR_SPEED)) |
| return mask_reduc_fn; |
| return IFN_LAST; |
| } |
| |
| /* Perform an in-order reduction (FOLD_LEFT_REDUCTION). STMT_INFO is the |
| statement that sets the live-out value. REDUC_DEF_STMT is the phi |
| statement. CODE is the operation performed by STMT_INFO and OPS are |
| its scalar operands. REDUC_INDEX is the index of the operand in |
| OPS that is set by REDUC_DEF_STMT. REDUC_FN is the function that |
| implements in-order reduction, or IFN_LAST if we should open-code it. |
| VECTYPE_IN is the type of the vector input. MASKS specifies the masks |
| that should be used to control the operation in a fully-masked loop. */ |
| |
| static bool |
| vectorize_fold_left_reduction (stmt_vec_info stmt_info, |
| gimple_stmt_iterator *gsi, |
| stmt_vec_info *vec_stmt, slp_tree slp_node, |
| gimple *reduc_def_stmt, |
| tree_code code, internal_fn reduc_fn, |
| tree ops[3], tree vectype_in, |
| int reduc_index, vec_loop_masks *masks) |
| { |
| loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info); |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| tree vectype_out = STMT_VINFO_VECTYPE (stmt_info); |
| stmt_vec_info new_stmt_info = NULL; |
| internal_fn mask_reduc_fn = get_masked_reduction_fn (reduc_fn, vectype_in); |
| |
| int ncopies; |
| if (slp_node) |
| ncopies = 1; |
| else |
| ncopies = vect_get_num_copies (loop_vinfo, vectype_in); |
| |
| gcc_assert (!nested_in_vect_loop_p (loop, stmt_info)); |
| gcc_assert (ncopies == 1); |
| gcc_assert (TREE_CODE_LENGTH (code) == binary_op); |
| gcc_assert (reduc_index == (code == MINUS_EXPR ? 0 : 1)); |
| gcc_assert (STMT_VINFO_VEC_REDUCTION_TYPE (stmt_info) |
| == FOLD_LEFT_REDUCTION); |
| |
| if (slp_node) |
| gcc_assert (known_eq (TYPE_VECTOR_SUBPARTS (vectype_out), |
| TYPE_VECTOR_SUBPARTS (vectype_in))); |
| |
| tree op0 = ops[1 - reduc_index]; |
| |
| int group_size = 1; |
| stmt_vec_info scalar_dest_def_info; |
| auto_vec<tree> vec_oprnds0; |
| if (slp_node) |
| { |
| auto_vec<vec<tree> > vec_defs (2); |
| auto_vec<tree> sops(2); |
| sops.quick_push (ops[0]); |
| sops.quick_push (ops[1]); |
| vect_get_slp_defs (sops, slp_node, &vec_defs); |
| vec_oprnds0.safe_splice (vec_defs[1 - reduc_index]); |
| vec_defs[0].release (); |
| vec_defs[1].release (); |
| group_size = SLP_TREE_SCALAR_STMTS (slp_node).length (); |
| scalar_dest_def_info = SLP_TREE_SCALAR_STMTS (slp_node)[group_size - 1]; |
| } |
| else |
| { |
| tree loop_vec_def0 = vect_get_vec_def_for_operand (op0, stmt_info); |
| vec_oprnds0.create (1); |
| vec_oprnds0.quick_push (loop_vec_def0); |
| scalar_dest_def_info = stmt_info; |
| } |
| |
| tree scalar_dest = gimple_assign_lhs (scalar_dest_def_info->stmt); |
| tree scalar_type = TREE_TYPE (scalar_dest); |
| tree reduc_var = gimple_phi_result (reduc_def_stmt); |
| |
| int vec_num = vec_oprnds0.length (); |
| gcc_assert (vec_num == 1 || slp_node); |
| tree vec_elem_type = TREE_TYPE (vectype_out); |
| gcc_checking_assert (useless_type_conversion_p (scalar_type, vec_elem_type)); |
| |
| tree vector_identity = NULL_TREE; |
| if (LOOP_VINFO_FULLY_MASKED_P (loop_vinfo)) |
| vector_identity = build_zero_cst (vectype_out); |
| |
| tree scalar_dest_var = vect_create_destination_var (scalar_dest, NULL); |
| int i; |
| tree def0; |
| FOR_EACH_VEC_ELT (vec_oprnds0, i, def0) |
| { |
| gimple *new_stmt; |
| tree mask = NULL_TREE; |
| if (LOOP_VINFO_FULLY_MASKED_P (loop_vinfo)) |
| mask = vect_get_loop_mask (gsi, masks, vec_num, vectype_in, i); |
| |
| /* Handle MINUS by adding the negative. */ |
| if (reduc_fn != IFN_LAST && code == MINUS_EXPR) |
| { |
| tree negated = make_ssa_name (vectype_out); |
| new_stmt = gimple_build_assign (negated, NEGATE_EXPR, def0); |
| gsi_insert_before (gsi, new_stmt, GSI_SAME_STMT); |
| def0 = negated; |
| } |
| |
| if (mask && mask_reduc_fn == IFN_LAST) |
| def0 = merge_with_identity (gsi, mask, vectype_out, def0, |
| vector_identity); |
| |
| /* On the first iteration the input is simply the scalar phi |
| result, and for subsequent iterations it is the output of |
| the preceding operation. */ |
| if (reduc_fn != IFN_LAST || (mask && mask_reduc_fn != IFN_LAST)) |
| { |
| if (mask && mask_reduc_fn != IFN_LAST) |
| new_stmt = gimple_build_call_internal (mask_reduc_fn, 3, reduc_var, |
| def0, mask); |
| else |
| new_stmt = gimple_build_call_internal (reduc_fn, 2, reduc_var, |
| def0); |
| /* For chained SLP reductions the output of the previous reduction |
| operation serves as the input of the next. For the final statement |
| the output cannot be a temporary - we reuse the original |
| scalar destination of the last statement. */ |
| if (i != vec_num - 1) |
| { |
| gimple_set_lhs (new_stmt, scalar_dest_var); |
| reduc_var = make_ssa_name (scalar_dest_var, new_stmt); |
| gimple_set_lhs (new_stmt, reduc_var); |
| } |
| } |
| else |
| { |
| reduc_var = vect_expand_fold_left (gsi, scalar_dest_var, code, |
| reduc_var, def0); |
| new_stmt = SSA_NAME_DEF_STMT (reduc_var); |
| /* Remove the statement, so that we can use the same code paths |
| as for statements that we've just created. */ |
| gimple_stmt_iterator tmp_gsi = gsi_for_stmt (new_stmt); |
| gsi_remove (&tmp_gsi, true); |
| } |
| |
| if (i == vec_num - 1) |
| { |
| gimple_set_lhs (new_stmt, scalar_dest); |
| new_stmt_info = vect_finish_replace_stmt (scalar_dest_def_info, |
| new_stmt); |
| } |
| else |
| new_stmt_info = vect_finish_stmt_generation (scalar_dest_def_info, |
| new_stmt, gsi); |
| |
| if (slp_node) |
| SLP_TREE_VEC_STMTS (slp_node).quick_push (new_stmt_info); |
| } |
| |
| if (!slp_node) |
| STMT_VINFO_VEC_STMT (stmt_info) = *vec_stmt = new_stmt_info; |
| |
| return true; |
| } |
| |
| /* Function is_nonwrapping_integer_induction. |
| |
| Check if STMT_VINO (which is part of loop LOOP) both increments and |
| does not cause overflow. */ |
| |
| static bool |
| is_nonwrapping_integer_induction (stmt_vec_info stmt_vinfo, struct loop *loop) |
| { |
| gphi *phi = as_a <gphi *> (stmt_vinfo->stmt); |
| tree base = STMT_VINFO_LOOP_PHI_EVOLUTION_BASE_UNCHANGED (stmt_vinfo); |
| tree step = STMT_VINFO_LOOP_PHI_EVOLUTION_PART (stmt_vinfo); |
| tree lhs_type = TREE_TYPE (gimple_phi_result (phi)); |
| widest_int ni, max_loop_value, lhs_max; |
| wi::overflow_type overflow = wi::OVF_NONE; |
| |
| /* Make sure the loop is integer based. */ |
| if (TREE_CODE (base) != INTEGER_CST |
| || TREE_CODE (step) != INTEGER_CST) |
| return false; |
| |
| /* Check that the max size of the loop will not wrap. */ |
| |
| if (TYPE_OVERFLOW_UNDEFINED (lhs_type)) |
| return true; |
| |
| if (! max_stmt_executions (loop, &ni)) |
| return false; |
| |
| max_loop_value = wi::mul (wi::to_widest (step), ni, TYPE_SIGN (lhs_type), |
| &overflow); |
| if (overflow) |
| return false; |
| |
| max_loop_value = wi::add (wi::to_widest (base), max_loop_value, |
| TYPE_SIGN (lhs_type), &overflow); |
| if (overflow) |
| return false; |
| |
| return (wi::min_precision (max_loop_value, TYPE_SIGN (lhs_type)) |
| <= TYPE_PRECISION (lhs_type)); |
| } |
| |
| /* Check if masking can be supported by inserting a conditional expression. |
| CODE is the code for the operation. COND_FN is the conditional internal |
| function, if it exists. VECTYPE_IN is the type of the vector input. */ |
| static bool |
| use_mask_by_cond_expr_p (enum tree_code code, internal_fn cond_fn, |
| tree vectype_in) |
| { |
| if (cond_fn != IFN_LAST |
| && direct_internal_fn_supported_p (cond_fn, vectype_in, |
| OPTIMIZE_FOR_SPEED)) |
| return false; |
| |
| switch (code) |
| { |
| case DOT_PROD_EXPR: |
| case SAD_EXPR: |
| return true; |
| |
| default: |
| return false; |
| } |
| } |
| |
| /* Insert a conditional expression to enable masked vectorization. CODE is the |
| code for the operation. VOP is the array of operands. MASK is the loop |
| mask. GSI is a statement iterator used to place the new conditional |
| expression. */ |
| static void |
| build_vect_cond_expr (enum tree_code code, tree vop[3], tree mask, |
| gimple_stmt_iterator *gsi) |
| { |
| switch (code) |
| { |
| case DOT_PROD_EXPR: |
| { |
| tree vectype = TREE_TYPE (vop[1]); |
| tree zero = build_zero_cst (vectype); |
| tree masked_op1 = make_temp_ssa_name (vectype, NULL, "masked_op1"); |
| gassign *select = gimple_build_assign (masked_op1, VEC_COND_EXPR, |
| mask, vop[1], zero); |
| gsi_insert_before (gsi, select, GSI_SAME_STMT); |
| vop[1] = masked_op1; |
| break; |
| } |
| |
| case SAD_EXPR: |
| { |
| tree vectype = TREE_TYPE (vop[1]); |
| tree masked_op1 = make_temp_ssa_name (vectype, NULL, "masked_op1"); |
| gassign *select = gimple_build_assign (masked_op1, VEC_COND_EXPR, |
| mask, vop[1], vop[0]); |
| gsi_insert_before (gsi, select, GSI_SAME_STMT); |
| vop[1] = masked_op1; |
| break; |
| } |
| |
| default: |
| gcc_unreachable (); |
| } |
| } |
| |
| /* Function vectorizable_reduction. |
| |
| Check if STMT_INFO performs a reduction operation that can be vectorized. |
| If VEC_STMT is also passed, vectorize STMT_INFO: create a vectorized |
| stmt to replace it, put it in VEC_STMT, and insert it at GSI. |
| Return true if STMT_INFO is vectorizable in this way. |
| |
| This function also handles reduction idioms (patterns) that have been |
| recognized in advance during vect_pattern_recog. In this case, STMT_INFO |
| may be of this form: |
| X = pattern_expr (arg0, arg1, ..., X) |
| and its STMT_VINFO_RELATED_STMT points to the last stmt in the original |
| sequence that had been detected and replaced by the pattern-stmt |
| (STMT_INFO). |
| |
| This function also handles reduction of condition expressions, for example: |
| for (int i = 0; i < N; i++) |
| if (a[i] < value) |
| last = a[i]; |
| This is handled by vectorising the loop and creating an additional vector |
| containing the loop indexes for which "a[i] < value" was true. In the |
| function epilogue this is reduced to a single max value and then used to |
| index into the vector of results. |
| |
| In some cases of reduction patterns, the type of the reduction variable X is |
| different than the type of the other arguments of STMT_INFO. |
| In such cases, the vectype that is used when transforming STMT_INFO into |
| a vector stmt is different than the vectype that is used to determine the |
| vectorization factor, because it consists of a different number of elements |
| than the actual number of elements that are being operated upon in parallel. |
| |
| For example, consider an accumulation of shorts into an int accumulator. |
| On some targets it's possible to vectorize this pattern operating on 8 |
| shorts at a time (hence, the vectype for purposes of determining the |
| vectorization factor should be V8HI); on the other hand, the vectype that |
| is used to create the vector form is actually V4SI (the type of the result). |
| |
| Upon entry to this function, STMT_VINFO_VECTYPE records the vectype that |
| indicates what is the actual level of parallelism (V8HI in the example), so |
| that the right vectorization factor would be derived. This vectype |
| corresponds to the type of arguments to the reduction stmt, and should *NOT* |
| be used to create the vectorized stmt. The right vectype for the vectorized |
| stmt is obtained from the type of the result X: |
| get_vectype_for_scalar_type (TREE_TYPE (X)) |
| |
| This means that, contrary to "regular" reductions (or "regular" stmts in |
| general), the following equation: |
| STMT_VINFO_VECTYPE == get_vectype_for_scalar_type (TREE_TYPE (X)) |
| does *NOT* necessarily hold for reduction patterns. */ |
| |
| bool |
| vectorizable_reduction (stmt_vec_info stmt_info, gimple_stmt_iterator *gsi, |
| stmt_vec_info *vec_stmt, slp_tree slp_node, |
| slp_instance slp_node_instance, |
| stmt_vector_for_cost *cost_vec) |
| { |
| tree vec_dest; |
| tree scalar_dest; |
| tree vectype_out = STMT_VINFO_VECTYPE (stmt_info); |
| tree vectype_in = NULL_TREE; |
| loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info); |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| enum tree_code code, orig_code; |
| internal_fn reduc_fn; |
| machine_mode vec_mode; |
| int op_type; |
| optab optab; |
| tree new_temp = NULL_TREE; |
| enum vect_def_type dt, cond_reduc_dt = vect_unknown_def_type; |
| stmt_vec_info cond_stmt_vinfo = NULL; |
| enum tree_code cond_reduc_op_code = ERROR_MARK; |
| tree scalar_type; |
| bool is_simple_use; |
| int i; |
| int ncopies; |
| int epilog_copies; |
| stmt_vec_info prev_stmt_info, prev_phi_info; |
| bool single_defuse_cycle = false; |
| stmt_vec_info new_stmt_info = NULL; |
| int j; |
| tree ops[3]; |
| enum vect_def_type dts[3]; |
| bool nested_cycle = false, found_nested_cycle_def = false; |
| bool double_reduc = false; |
| basic_block def_bb; |
| struct loop * def_stmt_loop; |
| tree def_arg; |
| auto_vec<tree> vec_oprnds0; |
| auto_vec<tree> vec_oprnds1; |
| auto_vec<tree> vec_oprnds2; |
| auto_vec<tree> vect_defs; |
| auto_vec<stmt_vec_info> phis; |
| int vec_num; |
| tree def0, tem; |
| tree cr_index_scalar_type = NULL_TREE, cr_index_vector_type = NULL_TREE; |
| tree cond_reduc_val = NULL_TREE; |
| |
| /* Make sure it was already recognized as a reduction computation. */ |
| if (STMT_VINFO_DEF_TYPE (stmt_info) != vect_reduction_def |
| && STMT_VINFO_DEF_TYPE (stmt_info) != vect_nested_cycle) |
| return false; |
| |
| if (nested_in_vect_loop_p (loop, stmt_info)) |
| { |
| loop = loop->inner; |
| nested_cycle = true; |
| } |
| |
| if (REDUC_GROUP_FIRST_ELEMENT (stmt_info)) |
| gcc_assert (slp_node |
| && REDUC_GROUP_FIRST_ELEMENT (stmt_info) == stmt_info); |
| |
| if (gphi *phi = dyn_cast <gphi *> (stmt_info->stmt)) |
| { |
| tree phi_result = gimple_phi_result (phi); |
| /* Analysis is fully done on the reduction stmt invocation. */ |
| if (! vec_stmt) |
| { |
| if (slp_node) |
| slp_node_instance->reduc_phis = slp_node; |
| |
| STMT_VINFO_TYPE (stmt_info) = reduc_vec_info_type; |
| return true; |
| } |
| |
| if (STMT_VINFO_REDUC_TYPE (stmt_info) == FOLD_LEFT_REDUCTION) |
| /* Leave the scalar phi in place. Note that checking |
| STMT_VINFO_VEC_REDUCTION_TYPE (as below) only works |
| for reductions involving a single statement. */ |
| return true; |
| |
| stmt_vec_info reduc_stmt_info = STMT_VINFO_REDUC_DEF (stmt_info); |
| reduc_stmt_info = vect_stmt_to_vectorize (reduc_stmt_info); |
| |
| if (STMT_VINFO_VEC_REDUCTION_TYPE (reduc_stmt_info) |
| == EXTRACT_LAST_REDUCTION) |
| /* Leave the scalar phi in place. */ |
| return true; |
| |
| gassign *reduc_stmt = as_a <gassign *> (reduc_stmt_info->stmt); |
| code = gimple_assign_rhs_code (reduc_stmt); |
| for (unsigned k = 1; k < gimple_num_ops (reduc_stmt); ++k) |
| { |
| tree op = gimple_op (reduc_stmt, k); |
| if (op == phi_result) |
| continue; |
| if (k == 1 && code == COND_EXPR) |
| continue; |
| bool is_simple_use = vect_is_simple_use (op, loop_vinfo, &dt); |
| gcc_assert (is_simple_use); |
| if (dt == vect_constant_def || dt == vect_external_def) |
| continue; |
| if (!vectype_in |
| || (GET_MODE_SIZE (SCALAR_TYPE_MODE (TREE_TYPE (vectype_in))) |
| < GET_MODE_SIZE (SCALAR_TYPE_MODE (TREE_TYPE (op))))) |
| vectype_in = get_vectype_for_scalar_type (TREE_TYPE (op)); |
| break; |
| } |
| /* For a nested cycle we might end up with an operation like |
| phi_result * phi_result. */ |
| if (!vectype_in) |
| vectype_in = STMT_VINFO_VECTYPE (stmt_info); |
| gcc_assert (vectype_in); |
| |
| if (slp_node) |
| ncopies = 1; |
| else |
| ncopies = vect_get_num_copies (loop_vinfo, vectype_in); |
| |
| stmt_vec_info use_stmt_info; |
| if (ncopies > 1 |
| && STMT_VINFO_RELEVANT (reduc_stmt_info) <= vect_used_only_live |
| && (use_stmt_info = loop_vinfo->lookup_single_use (phi_result)) |
| && vect_stmt_to_vectorize (use_stmt_info) == reduc_stmt_info) |
| single_defuse_cycle = true; |
| |
| /* Create the destination vector */ |
| scalar_dest = gimple_assign_lhs (reduc_stmt); |
| vec_dest = vect_create_destination_var (scalar_dest, vectype_out); |
| |
| if (slp_node) |
| /* The size vect_schedule_slp_instance computes is off for us. */ |
| vec_num = vect_get_num_vectors |
| (LOOP_VINFO_VECT_FACTOR (loop_vinfo) |
| * SLP_TREE_SCALAR_STMTS (slp_node).length (), |
| vectype_in); |
| else |
| vec_num = 1; |
| |
| /* Generate the reduction PHIs upfront. */ |
| prev_phi_info = NULL; |
| for (j = 0; j < ncopies; j++) |
| { |
| if (j == 0 || !single_defuse_cycle) |
| { |
| for (i = 0; i < vec_num; i++) |
| { |
| /* Create the reduction-phi that defines the reduction |
| operand. */ |
| gimple *new_phi = create_phi_node (vec_dest, loop->header); |
| stmt_vec_info new_phi_info = loop_vinfo->add_stmt (new_phi); |
| |
| if (slp_node) |
| SLP_TREE_VEC_STMTS (slp_node).quick_push (new_phi_info); |
| else |
| { |
| if (j == 0) |
| STMT_VINFO_VEC_STMT (stmt_info) |
| = *vec_stmt = new_phi_info; |
| else |
| STMT_VINFO_RELATED_STMT (prev_phi_info) = new_phi_info; |
| prev_phi_info = new_phi_info; |
| } |
| } |
| } |
| } |
| |
| return true; |
| } |
| |
| /* 1. Is vectorizable reduction? */ |
| /* Not supportable if the reduction variable is used in the loop, unless |
| it's a reduction chain. */ |
| if (STMT_VINFO_RELEVANT (stmt_info) > vect_used_in_outer |
| && !REDUC_GROUP_FIRST_ELEMENT (stmt_info)) |
| return false; |
| |
| /* Reductions that are not used even in an enclosing outer-loop, |
| are expected to be "live" (used out of the loop). */ |
| if (STMT_VINFO_RELEVANT (stmt_info) == vect_unused_in_scope |
| && !STMT_VINFO_LIVE_P (stmt_info)) |
| return false; |
| |
| /* 2. Has this been recognized as a reduction pattern? |
| |
| Check if STMT represents a pattern that has been recognized |
| in earlier analysis stages. For stmts that represent a pattern, |
| the STMT_VINFO_RELATED_STMT field records the last stmt in |
| the original sequence that constitutes the pattern. */ |
| |
| stmt_vec_info orig_stmt_info = STMT_VINFO_RELATED_STMT (stmt_info); |
| if (orig_stmt_info) |
| { |
| gcc_assert (STMT_VINFO_IN_PATTERN_P (orig_stmt_info)); |
| gcc_assert (!STMT_VINFO_IN_PATTERN_P (stmt_info)); |
| } |
| |
| /* 3. Check the operands of the operation. The first operands are defined |
| inside the loop body. The last operand is the reduction variable, |
| which is defined by the loop-header-phi. */ |
| |
| gassign *stmt = as_a <gassign *> (stmt_info->stmt); |
| |
| /* Flatten RHS. */ |
| switch (get_gimple_rhs_class (gimple_assign_rhs_code (stmt))) |
| { |
| case GIMPLE_BINARY_RHS: |
| code = gimple_assign_rhs_code (stmt); |
| op_type = TREE_CODE_LENGTH (code); |
| gcc_assert (op_type == binary_op); |
| ops[0] = gimple_assign_rhs1 (stmt); |
| ops[1] = gimple_assign_rhs2 (stmt); |
| break; |
| |
| case GIMPLE_TERNARY_RHS: |
| code = gimple_assign_rhs_code (stmt); |
| op_type = TREE_CODE_LENGTH (code); |
| gcc_assert (op_type == ternary_op); |
| ops[0] = gimple_assign_rhs1 (stmt); |
| ops[1] = gimple_assign_rhs2 (stmt); |
| ops[2] = gimple_assign_rhs3 (stmt); |
| break; |
| |
| case GIMPLE_UNARY_RHS: |
| return false; |
| |
| default: |
| gcc_unreachable (); |
| } |
| |
| if (code == COND_EXPR && slp_node) |
| return false; |
| |
| scalar_dest = gimple_assign_lhs (stmt); |
| scalar_type = TREE_TYPE (scalar_dest); |
| if (!POINTER_TYPE_P (scalar_type) && !INTEGRAL_TYPE_P (scalar_type) |
| && !SCALAR_FLOAT_TYPE_P (scalar_type)) |
| return false; |
| |
| /* Do not try to vectorize bit-precision reductions. */ |
| if (!type_has_mode_precision_p (scalar_type)) |
| return false; |
| |
| /* All uses but the last are expected to be defined in the loop. |
| The last use is the reduction variable. In case of nested cycle this |
| assumption is not true: we use reduc_index to record the index of the |
| reduction variable. */ |
| stmt_vec_info reduc_def_info; |
| if (orig_stmt_info) |
| reduc_def_info = STMT_VINFO_REDUC_DEF (orig_stmt_info); |
| else |
| reduc_def_info = STMT_VINFO_REDUC_DEF (stmt_info); |
| gcc_assert (reduc_def_info); |
| gphi *reduc_def_phi = as_a <gphi *> (reduc_def_info->stmt); |
| tree reduc_def = PHI_RESULT (reduc_def_phi); |
| int reduc_index = -1; |
| for (i = 0; i < op_type; i++) |
| { |
| /* The condition of COND_EXPR is checked in vectorizable_condition(). */ |
| if (i == 0 && code == COND_EXPR) |
| continue; |
| |
| stmt_vec_info def_stmt_info; |
| is_simple_use = vect_is_simple_use (ops[i], loop_vinfo, &dts[i], &tem, |
| &def_stmt_info); |
| dt = dts[i]; |
| gcc_assert (is_simple_use); |
| if (dt == vect_reduction_def |
| && ops[i] == reduc_def) |
| { |
| reduc_index = i; |
| continue; |
| } |
| else if (tem) |
| { |
| /* To properly compute ncopies we are interested in the widest |
| input type in case we're looking at a widening accumulation. */ |
| if (!vectype_in |
| || (GET_MODE_SIZE (SCALAR_TYPE_MODE (TREE_TYPE (vectype_in))) |
| < GET_MODE_SIZE (SCALAR_TYPE_MODE (TREE_TYPE (tem))))) |
| vectype_in = tem; |
| } |
| |
| if (dt != vect_internal_def |
| && dt != vect_external_def |
| && dt != vect_constant_def |
| && dt != vect_induction_def |
| && !(dt == vect_nested_cycle && nested_cycle)) |
| return false; |
| |
| if (dt == vect_nested_cycle |
| && ops[i] == reduc_def) |
| { |
| found_nested_cycle_def = true; |
| reduc_index = i; |
| } |
| |
| if (i == 1 && code == COND_EXPR) |
| { |
| /* Record how value of COND_EXPR is defined. */ |
| if (dt == vect_constant_def) |
| { |
| cond_reduc_dt = dt; |
| cond_reduc_val = ops[i]; |
| } |
| if (dt == vect_induction_def |
| && def_stmt_info |
| && is_nonwrapping_integer_induction (def_stmt_info, loop)) |
| { |
| cond_reduc_dt = dt; |
| cond_stmt_vinfo = def_stmt_info; |
| } |
| } |
| } |
| |
| if (!vectype_in) |
| vectype_in = vectype_out; |
| |
| /* When vectorizing a reduction chain w/o SLP the reduction PHI is not |
| directy used in stmt. */ |
| if (reduc_index == -1) |
| { |
| if (STMT_VINFO_REDUC_TYPE (stmt_info) == FOLD_LEFT_REDUCTION) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "in-order reduction chain without SLP.\n"); |
| return false; |
| } |
| } |
| |
| if (!(reduc_index == -1 |
| || dts[reduc_index] == vect_reduction_def |
| || dts[reduc_index] == vect_nested_cycle |
| || ((dts[reduc_index] == vect_internal_def |
| || dts[reduc_index] == vect_external_def |
| || dts[reduc_index] == vect_constant_def |
| || dts[reduc_index] == vect_induction_def) |
| && nested_cycle && found_nested_cycle_def))) |
| { |
| /* For pattern recognized stmts, orig_stmt might be a reduction, |
| but some helper statements for the pattern might not, or |
| might be COND_EXPRs with reduction uses in the condition. */ |
| gcc_assert (orig_stmt_info); |
| return false; |
| } |
| |
| /* PHIs should not participate in patterns. */ |
| gcc_assert (!STMT_VINFO_RELATED_STMT (reduc_def_info)); |
| enum vect_reduction_type v_reduc_type |
| = STMT_VINFO_REDUC_TYPE (reduc_def_info); |
| stmt_vec_info tmp = STMT_VINFO_REDUC_DEF (reduc_def_info); |
| |
| STMT_VINFO_VEC_REDUCTION_TYPE (stmt_info) = v_reduc_type; |
| /* If we have a condition reduction, see if we can simplify it further. */ |
| if (v_reduc_type == COND_REDUCTION) |
| { |
| /* TODO: We can't yet handle reduction chains, since we need to treat |
| each COND_EXPR in the chain specially, not just the last one. |
| E.g. for: |
| |
| x_1 = PHI <x_3, ...> |
| x_2 = a_2 ? ... : x_1; |
| x_3 = a_3 ? ... : x_2; |
| |
| we're interested in the last element in x_3 for which a_2 || a_3 |
| is true, whereas the current reduction chain handling would |
| vectorize x_2 as a normal VEC_COND_EXPR and only treat x_3 |
| as a reduction operation. */ |
| if (reduc_index == -1) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "conditional reduction chains not supported\n"); |
| return false; |
| } |
| |
| /* vect_is_simple_reduction ensured that operand 2 is the |
| loop-carried operand. */ |
| gcc_assert (reduc_index == 2); |
| |
| /* Loop peeling modifies initial value of reduction PHI, which |
| makes the reduction stmt to be transformed different to the |
| original stmt analyzed. We need to record reduction code for |
| CONST_COND_REDUCTION type reduction at analyzing stage, thus |
| it can be used directly at transform stage. */ |
| if (STMT_VINFO_VEC_CONST_COND_REDUC_CODE (stmt_info) == MAX_EXPR |
| || STMT_VINFO_VEC_CONST_COND_REDUC_CODE (stmt_info) == MIN_EXPR) |
| { |
| /* Also set the reduction type to CONST_COND_REDUCTION. */ |
| gcc_assert (cond_reduc_dt == vect_constant_def); |
| STMT_VINFO_VEC_REDUCTION_TYPE (stmt_info) = CONST_COND_REDUCTION; |
| } |
| else if (direct_internal_fn_supported_p (IFN_FOLD_EXTRACT_LAST, |
| vectype_in, OPTIMIZE_FOR_SPEED)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "optimizing condition reduction with" |
| " FOLD_EXTRACT_LAST.\n"); |
| STMT_VINFO_VEC_REDUCTION_TYPE (stmt_info) = EXTRACT_LAST_REDUCTION; |
| } |
| else if (cond_reduc_dt == vect_induction_def) |
| { |
| tree base |
| = STMT_VINFO_LOOP_PHI_EVOLUTION_BASE_UNCHANGED (cond_stmt_vinfo); |
| tree step = STMT_VINFO_LOOP_PHI_EVOLUTION_PART (cond_stmt_vinfo); |
| |
| gcc_assert (TREE_CODE (base) == INTEGER_CST |
| && TREE_CODE (step) == INTEGER_CST); |
| cond_reduc_val = NULL_TREE; |
| /* Find a suitable value, for MAX_EXPR below base, for MIN_EXPR |
| above base; punt if base is the minimum value of the type for |
| MAX_EXPR or maximum value of the type for MIN_EXPR for now. */ |
| if (tree_int_cst_sgn (step) == -1) |
| { |
| cond_reduc_op_code = MIN_EXPR; |
| if (tree_int_cst_sgn (base) == -1) |
| cond_reduc_val = build_int_cst (TREE_TYPE (base), 0); |
| else if (tree_int_cst_lt (base, |
| TYPE_MAX_VALUE (TREE_TYPE (base)))) |
| cond_reduc_val |
| = int_const_binop (PLUS_EXPR, base, integer_one_node); |
| } |
| else |
| { |
| cond_reduc_op_code = MAX_EXPR; |
| if (tree_int_cst_sgn (base) == 1) |
| cond_reduc_val = build_int_cst (TREE_TYPE (base), 0); |
| else if (tree_int_cst_lt (TYPE_MIN_VALUE (TREE_TYPE (base)), |
| base)) |
| cond_reduc_val |
| = int_const_binop (MINUS_EXPR, base, integer_one_node); |
| } |
| if (cond_reduc_val) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "condition expression based on " |
| "integer induction.\n"); |
| STMT_VINFO_VEC_REDUCTION_TYPE (stmt_info) |
| = INTEGER_INDUC_COND_REDUCTION; |
| } |
| } |
| else if (cond_reduc_dt == vect_constant_def) |
| { |
| enum vect_def_type cond_initial_dt; |
| gimple *def_stmt = SSA_NAME_DEF_STMT (ops[reduc_index]); |
| tree cond_initial_val |
| = PHI_ARG_DEF_FROM_EDGE (def_stmt, loop_preheader_edge (loop)); |
| |
| gcc_assert (cond_reduc_val != NULL_TREE); |
| vect_is_simple_use (cond_initial_val, loop_vinfo, &cond_initial_dt); |
| if (cond_initial_dt == vect_constant_def |
| && types_compatible_p (TREE_TYPE (cond_initial_val), |
| TREE_TYPE (cond_reduc_val))) |
| { |
| tree e = fold_binary (LE_EXPR, boolean_type_node, |
| cond_initial_val, cond_reduc_val); |
| if (e && (integer_onep (e) || integer_zerop (e))) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "condition expression based on " |
| "compile time constant.\n"); |
| /* Record reduction code at analysis stage. */ |
| STMT_VINFO_VEC_CONST_COND_REDUC_CODE (stmt_info) |
| = integer_onep (e) ? MAX_EXPR : MIN_EXPR; |
| STMT_VINFO_VEC_REDUCTION_TYPE (stmt_info) |
| = CONST_COND_REDUCTION; |
| } |
| } |
| } |
| } |
| |
| if (orig_stmt_info) |
| gcc_assert (tmp == orig_stmt_info |
| || REDUC_GROUP_FIRST_ELEMENT (tmp) == orig_stmt_info); |
| else |
| /* We changed STMT to be the first stmt in reduction chain, hence we |
| check that in this case the first element in the chain is STMT. */ |
| gcc_assert (tmp == stmt_info |
| || REDUC_GROUP_FIRST_ELEMENT (tmp) == stmt_info); |
| |
| if (STMT_VINFO_LIVE_P (reduc_def_info)) |
| return false; |
| |
| if (slp_node) |
| ncopies = 1; |
| else |
| ncopies = vect_get_num_copies (loop_vinfo, vectype_in); |
| |
| gcc_assert (ncopies >= 1); |
| |
| vec_mode = TYPE_MODE (vectype_in); |
| poly_uint64 nunits_out = TYPE_VECTOR_SUBPARTS (vectype_out); |
| |
| if (nested_cycle) |
| { |
| def_bb = gimple_bb (reduc_def_phi); |
| def_stmt_loop = def_bb->loop_father; |
| def_arg = PHI_ARG_DEF_FROM_EDGE (reduc_def_phi, |
| loop_preheader_edge (def_stmt_loop)); |
| stmt_vec_info def_arg_stmt_info = loop_vinfo->lookup_def (def_arg); |
| if (def_arg_stmt_info |
| && (STMT_VINFO_DEF_TYPE (def_arg_stmt_info) |
| == vect_double_reduction_def)) |
| double_reduc = true; |
| } |
| |
| vect_reduction_type reduction_type |
| = STMT_VINFO_VEC_REDUCTION_TYPE (stmt_info); |
| if ((double_reduc || reduction_type != TREE_CODE_REDUCTION) |
| && ncopies > 1) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "multiple types in double reduction or condition " |
| "reduction.\n"); |
| return false; |
| } |
| |
| if (code == COND_EXPR) |
| { |
| /* Only call during the analysis stage, otherwise we'll lose |
| STMT_VINFO_TYPE. */ |
| if (!vec_stmt && !vectorizable_condition (stmt_info, gsi, NULL, |
| true, NULL, cost_vec)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "unsupported condition in reduction\n"); |
| return false; |
| } |
| } |
| else if (code == LSHIFT_EXPR || code == RSHIFT_EXPR |
| || code == LROTATE_EXPR || code == RROTATE_EXPR) |
| { |
| /* Only call during the analysis stage, otherwise we'll lose |
| STMT_VINFO_TYPE. We only support this for nested cycles |
| without double reductions at the moment. */ |
| if (!nested_cycle |
| || double_reduc |
| || (!vec_stmt && !vectorizable_shift (stmt_info, gsi, NULL, |
| NULL, cost_vec))) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "unsupported shift or rotation in reduction\n"); |
| return false; |
| } |
| } |
| else |
| { |
| /* 4. Supportable by target? */ |
| |
| /* 4.1. check support for the operation in the loop */ |
| optab = optab_for_tree_code (code, vectype_in, optab_default); |
| if (!optab) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "no optab.\n"); |
| |
| return false; |
| } |
| |
| if (optab_handler (optab, vec_mode) == CODE_FOR_nothing) |
| { |
| if (dump_enabled_p ()) |
| dump_printf (MSG_NOTE, "op not supported by target.\n"); |
| |
| if (maybe_ne (GET_MODE_SIZE (vec_mode), UNITS_PER_WORD) |
| || !vect_worthwhile_without_simd_p (loop_vinfo, code)) |
| return false; |
| |
| if (dump_enabled_p ()) |
| dump_printf (MSG_NOTE, "proceeding using word mode.\n"); |
| } |
| |
| /* Worthwhile without SIMD support? */ |
| if (!VECTOR_MODE_P (TYPE_MODE (vectype_in)) |
| && !vect_worthwhile_without_simd_p (loop_vinfo, code)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not worthwhile without SIMD support.\n"); |
| |
| return false; |
| } |
| } |
| |
| /* 4.2. Check support for the epilog operation. |
| |
| If STMT represents a reduction pattern, then the type of the |
| reduction variable may be different than the type of the rest |
| of the arguments. For example, consider the case of accumulation |
| of shorts into an int accumulator; The original code: |
| S1: int_a = (int) short_a; |
| orig_stmt-> S2: int_acc = plus <int_a ,int_acc>; |
| |
| was replaced with: |
| STMT: int_acc = widen_sum <short_a, int_acc> |
| |
| This means that: |
| 1. The tree-code that is used to create the vector operation in the |
| epilog code (that reduces the partial results) is not the |
| tree-code of STMT, but is rather the tree-code of the original |
| stmt from the pattern that STMT is replacing. I.e, in the example |
| above we want to use 'widen_sum' in the loop, but 'plus' in the |
| epilog. |
| 2. The type (mode) we use to check available target support |
| for the vector operation to be created in the *epilog*, is |
| determined by the type of the reduction variable (in the example |
| above we'd check this: optab_handler (plus_optab, vect_int_mode])). |
| However the type (mode) we use to check available target support |
| for the vector operation to be created *inside the loop*, is |
| determined by the type of the other arguments to STMT (in the |
| example we'd check this: optab_handler (widen_sum_optab, |
| vect_short_mode)). |
| |
| This is contrary to "regular" reductions, in which the types of all |
| the arguments are the same as the type of the reduction variable. |
| For "regular" reductions we can therefore use the same vector type |
| (and also the same tree-code) when generating the epilog code and |
| when generating the code inside the loop. */ |
| |
| if (orig_stmt_info |
| && (reduction_type == TREE_CODE_REDUCTION |
| || reduction_type == FOLD_LEFT_REDUCTION)) |
| { |
| /* This is a reduction pattern: get the vectype from the type of the |
| reduction variable, and get the tree-code from orig_stmt. */ |
| orig_code = gimple_assign_rhs_code (orig_stmt_info->stmt); |
| gcc_assert (vectype_out); |
| vec_mode = TYPE_MODE (vectype_out); |
| } |
| else |
| { |
| /* Regular reduction: use the same vectype and tree-code as used for |
| the vector code inside the loop can be used for the epilog code. */ |
| orig_code = code; |
| |
| if (code == MINUS_EXPR) |
| orig_code = PLUS_EXPR; |
| |
| /* For simple condition reductions, replace with the actual expression |
| we want to base our reduction around. */ |
| if (reduction_type == CONST_COND_REDUCTION) |
| { |
| orig_code = STMT_VINFO_VEC_CONST_COND_REDUC_CODE (stmt_info); |
| gcc_assert (orig_code == MAX_EXPR || orig_code == MIN_EXPR); |
| } |
| else if (reduction_type == INTEGER_INDUC_COND_REDUCTION) |
| orig_code = cond_reduc_op_code; |
| } |
| |
| reduc_fn = IFN_LAST; |
| |
| if (reduction_type == TREE_CODE_REDUCTION |
| || reduction_type == FOLD_LEFT_REDUCTION |
| || reduction_type == INTEGER_INDUC_COND_REDUCTION |
| || reduction_type == CONST_COND_REDUCTION) |
| { |
| if (reduction_type == FOLD_LEFT_REDUCTION |
| ? fold_left_reduction_fn (orig_code, &reduc_fn) |
| : reduction_fn_for_scalar_code (orig_code, &reduc_fn)) |
| { |
| if (reduc_fn != IFN_LAST |
| && !direct_internal_fn_supported_p (reduc_fn, vectype_out, |
| OPTIMIZE_FOR_SPEED)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "reduc op not supported by target.\n"); |
| |
| reduc_fn = IFN_LAST; |
| } |
| } |
| else |
| { |
| if (!nested_cycle || double_reduc) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "no reduc code for scalar code.\n"); |
| |
| return false; |
| } |
| } |
| } |
| else if (reduction_type == COND_REDUCTION) |
| { |
| int scalar_precision |
| = GET_MODE_PRECISION (SCALAR_TYPE_MODE (scalar_type)); |
| cr_index_scalar_type = make_unsigned_type (scalar_precision); |
| cr_index_vector_type = build_vector_type (cr_index_scalar_type, |
| nunits_out); |
| |
| if (direct_internal_fn_supported_p (IFN_REDUC_MAX, cr_index_vector_type, |
| OPTIMIZE_FOR_SPEED)) |
| reduc_fn = IFN_REDUC_MAX; |
| } |
| |
| if (reduction_type != EXTRACT_LAST_REDUCTION |
| && (!nested_cycle || double_reduc) |
| && reduc_fn == IFN_LAST |
| && !nunits_out.is_constant ()) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "missing target support for reduction on" |
| " variable-length vectors.\n"); |
| return false; |
| } |
| |
| /* For SLP reductions, see if there is a neutral value we can use. */ |
| tree neutral_op = NULL_TREE; |
| if (slp_node) |
| neutral_op = neutral_op_for_slp_reduction |
| (slp_node_instance->reduc_phis, code, |
| REDUC_GROUP_FIRST_ELEMENT (stmt_info) != NULL); |
| |
| if (double_reduc && reduction_type == FOLD_LEFT_REDUCTION) |
| { |
| /* We can't support in-order reductions of code such as this: |
| |
| for (int i = 0; i < n1; ++i) |
| for (int j = 0; j < n2; ++j) |
| l += a[j]; |
| |
| since GCC effectively transforms the loop when vectorizing: |
| |
| for (int i = 0; i < n1 / VF; ++i) |
| for (int j = 0; j < n2; ++j) |
| for (int k = 0; k < VF; ++k) |
| l += a[j]; |
| |
| which is a reassociation of the original operation. */ |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "in-order double reduction not supported.\n"); |
| |
| return false; |
| } |
| |
| if (reduction_type == FOLD_LEFT_REDUCTION |
| && slp_node |
| && !REDUC_GROUP_FIRST_ELEMENT (stmt_info)) |
| { |
| /* We cannot use in-order reductions in this case because there is |
| an implicit reassociation of the operations involved. */ |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "in-order unchained SLP reductions not supported.\n"); |
| return false; |
| } |
| |
| /* For double reductions, and for SLP reductions with a neutral value, |
| we construct a variable-length initial vector by loading a vector |
| full of the neutral value and then shift-and-inserting the start |
| values into the low-numbered elements. */ |
| if ((double_reduc || neutral_op) |
| && !nunits_out.is_constant () |
| && !direct_internal_fn_supported_p (IFN_VEC_SHL_INSERT, |
| vectype_out, OPTIMIZE_FOR_SPEED)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "reduction on variable-length vectors requires" |
| " target support for a vector-shift-and-insert" |
| " operation.\n"); |
| return false; |
| } |
| |
| /* Check extra constraints for variable-length unchained SLP reductions. */ |
| if (STMT_SLP_TYPE (stmt_info) |
| && !REDUC_GROUP_FIRST_ELEMENT (stmt_info) |
| && !nunits_out.is_constant ()) |
| { |
| /* We checked above that we could build the initial vector when |
| there's a neutral element value. Check here for the case in |
| which each SLP statement has its own initial value and in which |
| that value needs to be repeated for every instance of the |
| statement within the initial vector. */ |
| unsigned int group_size = SLP_TREE_SCALAR_STMTS (slp_node).length (); |
| scalar_mode elt_mode = SCALAR_TYPE_MODE (TREE_TYPE (vectype_out)); |
| if (!neutral_op |
| && !can_duplicate_and_interleave_p (group_size, elt_mode)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "unsupported form of SLP reduction for" |
| " variable-length vectors: cannot build" |
| " initial vector.\n"); |
| return false; |
| } |
| /* The epilogue code relies on the number of elements being a multiple |
| of the group size. The duplicate-and-interleave approach to setting |
| up the the initial vector does too. */ |
| if (!multiple_p (nunits_out, group_size)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "unsupported form of SLP reduction for" |
| " variable-length vectors: the vector size" |
| " is not a multiple of the number of results.\n"); |
| return false; |
| } |
| } |
| |
| /* In case of widenning multiplication by a constant, we update the type |
| of the constant to be the type of the other operand. We check that the |
| constant fits the type in the pattern recognition pass. */ |
| if (code == DOT_PROD_EXPR |
| && !types_compatible_p (TREE_TYPE (ops[0]), TREE_TYPE (ops[1]))) |
| { |
| if (TREE_CODE (ops[0]) == INTEGER_CST) |
| ops[0] = fold_convert (TREE_TYPE (ops[1]), ops[0]); |
| else if (TREE_CODE (ops[1]) == INTEGER_CST) |
| ops[1] = fold_convert (TREE_TYPE (ops[0]), ops[1]); |
| else |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "invalid types in dot-prod\n"); |
| |
| return false; |
| } |
| } |
| |
| if (reduction_type == COND_REDUCTION) |
| { |
| widest_int ni; |
| |
| if (! max_loop_iterations (loop, &ni)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "loop count not known, cannot create cond " |
| "reduction.\n"); |
| return false; |
| } |
| /* Convert backedges to iterations. */ |
| ni += 1; |
| |
| /* The additional index will be the same type as the condition. Check |
| that the loop can fit into this less one (because we'll use up the |
| zero slot for when there are no matches). */ |
| tree max_index = TYPE_MAX_VALUE (cr_index_scalar_type); |
| if (wi::geu_p (ni, wi::to_widest (max_index))) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "loop size is greater than data size.\n"); |
| return false; |
| } |
| } |
| |
| /* In case the vectorization factor (VF) is bigger than the number |
| of elements that we can fit in a vectype (nunits), we have to generate |
| more than one vector stmt - i.e - we need to "unroll" the |
| vector stmt by a factor VF/nunits. For more details see documentation |
| in vectorizable_operation. */ |
| |
| /* If the reduction is used in an outer loop we need to generate |
| VF intermediate results, like so (e.g. for ncopies=2): |
| r0 = phi (init, r0) |
| r1 = phi (init, r1) |
| r0 = x0 + r0; |
| r1 = x1 + r1; |
| (i.e. we generate VF results in 2 registers). |
| In this case we have a separate def-use cycle for each copy, and therefore |
| for each copy we get the vector def for the reduction variable from the |
| respective phi node created for this copy. |
| |
| Otherwise (the reduction is unused in the loop nest), we can combine |
| together intermediate results, like so (e.g. for ncopies=2): |
| r = phi (init, r) |
| r = x0 + r; |
| r = x1 + r; |
| (i.e. we generate VF/2 results in a single register). |
| In this case for each copy we get the vector def for the reduction variable |
| from the vectorized reduction operation generated in the previous iteration. |
| |
| This only works when we see both the reduction PHI and its only consumer |
| in vectorizable_reduction and there are no intermediate stmts |
| participating. */ |
| stmt_vec_info use_stmt_info; |
| tree reduc_phi_result = gimple_phi_result (reduc_def_phi); |
| if (ncopies > 1 |
| && (STMT_VINFO_RELEVANT (stmt_info) <= vect_used_only_live) |
| && (use_stmt_info = loop_vinfo->lookup_single_use (reduc_phi_result)) |
| && vect_stmt_to_vectorize (use_stmt_info) == stmt_info) |
| { |
| single_defuse_cycle = true; |
| epilog_copies = 1; |
| } |
| else |
| epilog_copies = ncopies; |
| |
| /* If the reduction stmt is one of the patterns that have lane |
| reduction embedded we cannot handle the case of ! single_defuse_cycle. */ |
| if ((ncopies > 1 |
| && ! single_defuse_cycle) |
| && (code == DOT_PROD_EXPR |
| || code == WIDEN_SUM_EXPR |
| || code == SAD_EXPR)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "multi def-use cycle not possible for lane-reducing " |
| "reduction operation\n"); |
| return false; |
| } |
| |
| if (slp_node) |
| vec_num = SLP_TREE_NUMBER_OF_VEC_STMTS (slp_node); |
| else |
| vec_num = 1; |
| |
| internal_fn cond_fn = get_conditional_internal_fn (code); |
| vec_loop_masks *masks = &LOOP_VINFO_MASKS (loop_vinfo); |
| bool mask_by_cond_expr = use_mask_by_cond_expr_p (code, cond_fn, vectype_in); |
| |
| if (!vec_stmt) /* transformation not required. */ |
| { |
| vect_model_reduction_cost (stmt_info, reduc_fn, ncopies, cost_vec); |
| if (loop_vinfo && LOOP_VINFO_CAN_FULLY_MASK_P (loop_vinfo)) |
| { |
| if (reduction_type != FOLD_LEFT_REDUCTION |
| && !mask_by_cond_expr |
| && (cond_fn == IFN_LAST |
| || !direct_internal_fn_supported_p (cond_fn, vectype_in, |
| OPTIMIZE_FOR_SPEED))) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "can't use a fully-masked loop because no" |
| " conditional operation is available.\n"); |
| LOOP_VINFO_CAN_FULLY_MASK_P (loop_vinfo) = false; |
| } |
| else if (reduc_index == -1) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "can't use a fully-masked loop for chained" |
| " reductions.\n"); |
| LOOP_VINFO_CAN_FULLY_MASK_P (loop_vinfo) = false; |
| } |
| else |
| vect_record_loop_mask (loop_vinfo, masks, ncopies * vec_num, |
| vectype_in); |
| } |
| if (dump_enabled_p () |
| && reduction_type == FOLD_LEFT_REDUCTION) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "using an in-order (fold-left) reduction.\n"); |
| STMT_VINFO_TYPE (stmt_info) = reduc_vec_info_type; |
| return true; |
| } |
| |
| /* Transform. */ |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "transform reduction.\n"); |
| |
| /* FORNOW: Multiple types are not supported for condition. */ |
| if (code == COND_EXPR) |
| gcc_assert (ncopies == 1); |
| |
| bool masked_loop_p = LOOP_VINFO_FULLY_MASKED_P (loop_vinfo); |
| |
| if (reduction_type == FOLD_LEFT_REDUCTION) |
| return vectorize_fold_left_reduction |
| (stmt_info, gsi, vec_stmt, slp_node, reduc_def_phi, code, |
| reduc_fn, ops, vectype_in, reduc_index, masks); |
| |
| if (reduction_type == EXTRACT_LAST_REDUCTION) |
| { |
| gcc_assert (!slp_node); |
| return vectorizable_condition (stmt_info, gsi, vec_stmt, |
| true, NULL, NULL); |
| } |
| |
| /* Create the destination vector */ |
| vec_dest = vect_create_destination_var (scalar_dest, vectype_out); |
| |
| prev_stmt_info = NULL; |
| prev_phi_info = NULL; |
| if (!slp_node) |
| { |
| vec_oprnds0.create (1); |
| vec_oprnds1.create (1); |
| if (op_type == ternary_op) |
| vec_oprnds2.create (1); |
| } |
| |
| phis.create (vec_num); |
| vect_defs.create (vec_num); |
| if (!slp_node) |
| vect_defs.quick_push (NULL_TREE); |
| |
| if (slp_node) |
| phis.splice (SLP_TREE_VEC_STMTS (slp_node_instance->reduc_phis)); |
| else |
| phis.quick_push (STMT_VINFO_VEC_STMT (reduc_def_info)); |
| |
| for (j = 0; j < ncopies; j++) |
| { |
| if (code == COND_EXPR) |
| { |
| gcc_assert (!slp_node); |
| vectorizable_condition (stmt_info, gsi, vec_stmt, |
| true, NULL, NULL); |
| break; |
| } |
| if (code == LSHIFT_EXPR |
| || code == RSHIFT_EXPR) |
| { |
| vectorizable_shift (stmt_info, gsi, vec_stmt, slp_node, NULL); |
| break; |
| } |
| |
| /* Handle uses. */ |
| if (j == 0) |
| { |
| if (slp_node) |
| { |
| /* Get vec defs for all the operands except the reduction index, |
| ensuring the ordering of the ops in the vector is kept. */ |
| auto_vec<tree, 3> slp_ops; |
| auto_vec<vec<tree>, 3> vec_defs; |
| |
| slp_ops.quick_push (ops[0]); |
| slp_ops.quick_push (ops[1]); |
| if (op_type == ternary_op) |
| slp_ops.quick_push (ops[2]); |
| |
| vect_get_slp_defs (slp_ops, slp_node, &vec_defs); |
| |
| vec_oprnds0.safe_splice (vec_defs[0]); |
| vec_defs[0].release (); |
| vec_oprnds1.safe_splice (vec_defs[1]); |
| vec_defs[1].release (); |
| if (op_type == ternary_op) |
| { |
| vec_oprnds2.safe_splice (vec_defs[2]); |
| vec_defs[2].release (); |
| } |
| } |
| else |
| { |
| vec_oprnds0.quick_push |
| (vect_get_vec_def_for_operand (ops[0], stmt_info)); |
| vec_oprnds1.quick_push |
| (vect_get_vec_def_for_operand (ops[1], stmt_info)); |
| if (op_type == ternary_op) |
| vec_oprnds2.quick_push |
| (vect_get_vec_def_for_operand (ops[2], stmt_info)); |
| } |
| } |
| else |
| { |
| if (!slp_node) |
| { |
| gcc_assert (reduc_index != -1 || ! single_defuse_cycle); |
| |
| if (single_defuse_cycle && reduc_index == 0) |
| vec_oprnds0[0] = gimple_get_lhs (new_stmt_info->stmt); |
| else |
| vec_oprnds0[0] |
| = vect_get_vec_def_for_stmt_copy (loop_vinfo, |
| vec_oprnds0[0]); |
| if (single_defuse_cycle && reduc_index == 1) |
| vec_oprnds1[0] = gimple_get_lhs (new_stmt_info->stmt); |
| else |
| vec_oprnds1[0] |
| = vect_get_vec_def_for_stmt_copy (loop_vinfo, |
| vec_oprnds1[0]); |
| if (op_type == ternary_op) |
| { |
| if (single_defuse_cycle && reduc_index == 2) |
| vec_oprnds2[0] = gimple_get_lhs (new_stmt_info->stmt); |
| else |
| vec_oprnds2[0] |
| = vect_get_vec_def_for_stmt_copy (loop_vinfo, |
| vec_oprnds2[0]); |
| } |
| } |
| } |
| |
| FOR_EACH_VEC_ELT (vec_oprnds0, i, def0) |
| { |
| tree vop[3] = { def0, vec_oprnds1[i], NULL_TREE }; |
| if (masked_loop_p && !mask_by_cond_expr) |
| { |
| /* Make sure that the reduction accumulator is vop[0]. */ |
| if (reduc_index == 1) |
| { |
| gcc_assert (commutative_tree_code (code)); |
| std::swap (vop[0], vop[1]); |
| } |
| tree mask = vect_get_loop_mask (gsi, masks, vec_num * ncopies, |
| vectype_in, i * ncopies + j); |
| gcall *call = gimple_build_call_internal (cond_fn, 4, mask, |
| vop[0], vop[1], |
| vop[0]); |
| new_temp = make_ssa_name (vec_dest, call); |
| gimple_call_set_lhs (call, new_temp); |
| gimple_call_set_nothrow (call, true); |
| new_stmt_info |
| = vect_finish_stmt_generation (stmt_info, call, gsi); |
| } |
| else |
| { |
| if (op_type == ternary_op) |
| vop[2] = vec_oprnds2[i]; |
| |
| if (masked_loop_p && mask_by_cond_expr) |
| { |
| tree mask = vect_get_loop_mask (gsi, masks, |
| vec_num * ncopies, |
| vectype_in, i * ncopies + j); |
| build_vect_cond_expr (code, vop, mask, gsi); |
| } |
| |
| gassign *new_stmt = gimple_build_assign (vec_dest, code, |
| vop[0], vop[1], vop[2]); |
| new_temp = make_ssa_name (vec_dest, new_stmt); |
| gimple_assign_set_lhs (new_stmt, new_temp); |
| new_stmt_info |
| = vect_finish_stmt_generation (stmt_info, new_stmt, gsi); |
| } |
| |
| if (slp_node) |
| { |
| SLP_TREE_VEC_STMTS (slp_node).quick_push (new_stmt_info); |
| vect_defs.quick_push (new_temp); |
| } |
| else |
| vect_defs[0] = new_temp; |
| } |
| |
| if (slp_node) |
| continue; |
| |
| if (j == 0) |
| STMT_VINFO_VEC_STMT (stmt_info) = *vec_stmt = new_stmt_info; |
| else |
| STMT_VINFO_RELATED_STMT (prev_stmt_info) = new_stmt_info; |
| |
| prev_stmt_info = new_stmt_info; |
| } |
| |
| /* Finalize the reduction-phi (set its arguments) and create the |
| epilog reduction code. */ |
| if ((!single_defuse_cycle || code == COND_EXPR) && !slp_node) |
| vect_defs[0] = gimple_get_lhs ((*vec_stmt)->stmt); |
| |
| vect_create_epilog_for_reduction (vect_defs, stmt_info, reduc_def_phi, |
| epilog_copies, reduc_fn, phis, |
| double_reduc, slp_node, slp_node_instance, |
| cond_reduc_val, cond_reduc_op_code, |
| neutral_op); |
| |
| return true; |
| } |
| |
| /* Function vect_min_worthwhile_factor. |
| |
| For a loop where we could vectorize the operation indicated by CODE, |
| return the minimum vectorization factor that makes it worthwhile |
| to use generic vectors. */ |
| static unsigned int |
| vect_min_worthwhile_factor (enum tree_code code) |
| { |
| switch (code) |
| { |
| case PLUS_EXPR: |
| case MINUS_EXPR: |
| case NEGATE_EXPR: |
| return 4; |
| |
| case BIT_AND_EXPR: |
| case BIT_IOR_EXPR: |
| case BIT_XOR_EXPR: |
| case BIT_NOT_EXPR: |
| return 2; |
| |
| default: |
| return INT_MAX; |
| } |
| } |
| |
| /* Return true if VINFO indicates we are doing loop vectorization and if |
| it is worth decomposing CODE operations into scalar operations for |
| that loop's vectorization factor. */ |
| |
| bool |
| vect_worthwhile_without_simd_p (vec_info *vinfo, tree_code code) |
| { |
| loop_vec_info loop_vinfo = dyn_cast <loop_vec_info> (vinfo); |
| unsigned HOST_WIDE_INT value; |
| return (loop_vinfo |
| && LOOP_VINFO_VECT_FACTOR (loop_vinfo).is_constant (&value) |
| && value >= vect_min_worthwhile_factor (code)); |
| } |
| |
| /* Function vectorizable_induction |
| |
| Check if STMT_INFO performs an induction computation that can be vectorized. |
| If VEC_STMT is also passed, vectorize the induction PHI: create a vectorized |
| phi to replace it, put it in VEC_STMT, and add it to the same basic block. |
| Return true if STMT_INFO is vectorizable in this way. */ |
| |
| bool |
| vectorizable_induction (stmt_vec_info stmt_info, |
| gimple_stmt_iterator *gsi ATTRIBUTE_UNUSED, |
| stmt_vec_info *vec_stmt, slp_tree slp_node, |
| stmt_vector_for_cost *cost_vec) |
| { |
| loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info); |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| unsigned ncopies; |
| bool nested_in_vect_loop = false; |
| struct loop *iv_loop; |
| tree vec_def; |
| edge pe = loop_preheader_edge (loop); |
| basic_block new_bb; |
| tree new_vec, vec_init, vec_step, t; |
| tree new_name; |
| gimple *new_stmt; |
| gphi *induction_phi; |
| tree induc_def, vec_dest; |
| tree init_expr, step_expr; |
| poly_uint64 vf = LOOP_VINFO_VECT_FACTOR (loop_vinfo); |
| unsigned i; |
| tree expr; |
| gimple_seq stmts; |
| imm_use_iterator imm_iter; |
| use_operand_p use_p; |
| gimple *exit_phi; |
| edge latch_e; |
| tree loop_arg; |
| gimple_stmt_iterator si; |
| |
| gphi *phi = dyn_cast <gphi *> (stmt_info->stmt); |
| if (!phi) |
| return false; |
| |
| if (!STMT_VINFO_RELEVANT_P (stmt_info)) |
| return false; |
| |
| /* Make sure it was recognized as induction computation. */ |
| if (STMT_VINFO_DEF_TYPE (stmt_info) != vect_induction_def) |
| return false; |
| |
| tree vectype = STMT_VINFO_VECTYPE (stmt_info); |
| poly_uint64 nunits = TYPE_VECTOR_SUBPARTS (vectype); |
| |
| if (slp_node) |
| ncopies = 1; |
| else |
| ncopies = vect_get_num_copies (loop_vinfo, vectype); |
| gcc_assert (ncopies >= 1); |
| |
| /* FORNOW. These restrictions should be relaxed. */ |
| if (nested_in_vect_loop_p (loop, stmt_info)) |
| { |
| imm_use_iterator imm_iter; |
| use_operand_p use_p; |
| gimple *exit_phi; |
| edge latch_e; |
| tree loop_arg; |
| |
| if (ncopies > 1) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "multiple types in nested loop.\n"); |
| return false; |
| } |
| |
| /* FORNOW: outer loop induction with SLP not supported. */ |
| if (STMT_SLP_TYPE (stmt_info)) |
| return false; |
| |
| exit_phi = NULL; |
| latch_e = loop_latch_edge (loop->inner); |
| loop_arg = PHI_ARG_DEF_FROM_EDGE (phi, latch_e); |
| FOR_EACH_IMM_USE_FAST (use_p, imm_iter, loop_arg) |
| { |
| gimple *use_stmt = USE_STMT (use_p); |
| if (is_gimple_debug (use_stmt)) |
| continue; |
| |
| if (!flow_bb_inside_loop_p (loop->inner, gimple_bb (use_stmt))) |
| { |
| exit_phi = use_stmt; |
| break; |
| } |
| } |
| if (exit_phi) |
| { |
| stmt_vec_info exit_phi_vinfo = loop_vinfo->lookup_stmt (exit_phi); |
| if (!(STMT_VINFO_RELEVANT_P (exit_phi_vinfo) |
| && !STMT_VINFO_LIVE_P (exit_phi_vinfo))) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "inner-loop induction only used outside " |
| "of the outer vectorized loop.\n"); |
| return false; |
| } |
| } |
| |
| nested_in_vect_loop = true; |
| iv_loop = loop->inner; |
| } |
| else |
| iv_loop = loop; |
| gcc_assert (iv_loop == (gimple_bb (phi))->loop_father); |
| |
| if (slp_node && !nunits.is_constant ()) |
| { |
| /* The current SLP code creates the initial value element-by-element. */ |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "SLP induction not supported for variable-length" |
| " vectors.\n"); |
| return false; |
| } |
| |
| if (!vec_stmt) /* transformation not required. */ |
| { |
| STMT_VINFO_TYPE (stmt_info) = induc_vec_info_type; |
| DUMP_VECT_SCOPE ("vectorizable_induction"); |
| vect_model_induction_cost (stmt_info, ncopies, cost_vec); |
| return true; |
| } |
| |
| /* Transform. */ |
| |
| /* Compute a vector variable, initialized with the first VF values of |
| the induction variable. E.g., for an iv with IV_PHI='X' and |
| evolution S, for a vector of 4 units, we want to compute: |
| [X, X + S, X + 2*S, X + 3*S]. */ |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "transform induction phi.\n"); |
| |
| latch_e = loop_latch_edge (iv_loop); |
| loop_arg = PHI_ARG_DEF_FROM_EDGE (phi, latch_e); |
| |
| step_expr = STMT_VINFO_LOOP_PHI_EVOLUTION_PART (stmt_info); |
| gcc_assert (step_expr != NULL_TREE); |
| |
| pe = loop_preheader_edge (iv_loop); |
| init_expr = PHI_ARG_DEF_FROM_EDGE (phi, |
| loop_preheader_edge (iv_loop)); |
| |
| stmts = NULL; |
| if (!nested_in_vect_loop) |
| { |
| /* Convert the initial value to the desired type. */ |
| tree new_type = TREE_TYPE (vectype); |
| init_expr = gimple_convert (&stmts, new_type, init_expr); |
| |
| /* If we are using the loop mask to "peel" for alignment then we need |
| to adjust the start value here. */ |
| tree skip_niters = LOOP_VINFO_MASK_SKIP_NITERS (loop_vinfo); |
| if (skip_niters != NULL_TREE) |
| { |
| if (FLOAT_TYPE_P (vectype)) |
| skip_niters = gimple_build (&stmts, FLOAT_EXPR, new_type, |
| skip_niters); |
| else |
| skip_niters = gimple_convert (&stmts, new_type, skip_niters); |
| tree skip_step = gimple_build (&stmts, MULT_EXPR, new_type, |
| skip_niters, step_expr); |
| init_expr = gimple_build (&stmts, MINUS_EXPR, new_type, |
| init_expr, skip_step); |
| } |
| } |
| |
| /* Convert the step to the desired type. */ |
| step_expr = gimple_convert (&stmts, TREE_TYPE (vectype), step_expr); |
| |
| if (stmts) |
| { |
| new_bb = gsi_insert_seq_on_edge_immediate (pe, stmts); |
| gcc_assert (!new_bb); |
| } |
| |
| /* Find the first insertion point in the BB. */ |
| basic_block bb = gimple_bb (phi); |
| si = gsi_after_labels (bb); |
| |
| /* For SLP induction we have to generate several IVs as for example |
| with group size 3 we need [i, i, i, i + S] [i + S, i + S, i + 2*S, i + 2*S] |
| [i + 2*S, i + 3*S, i + 3*S, i + 3*S]. The step is the same uniform |
| [VF*S, VF*S, VF*S, VF*S] for all. */ |
| if (slp_node) |
| { |
| /* Enforced above. */ |
| unsigned int const_nunits = nunits.to_constant (); |
| |
| /* Generate [VF*S, VF*S, ... ]. */ |
| if (SCALAR_FLOAT_TYPE_P (TREE_TYPE (step_expr))) |
| { |
| expr = build_int_cst (integer_type_node, vf); |
| expr = fold_convert (TREE_TYPE (step_expr), expr); |
| } |
| else |
| expr = build_int_cst (TREE_TYPE (step_expr), vf); |
| new_name = fold_build2 (MULT_EXPR, TREE_TYPE (step_expr), |
| expr, step_expr); |
| if (! CONSTANT_CLASS_P (new_name)) |
| new_name = vect_init_vector (stmt_info, new_name, |
| TREE_TYPE (step_expr), NULL); |
| new_vec = build_vector_from_val (vectype, new_name); |
| vec_step = vect_init_vector (stmt_info, new_vec, vectype, NULL); |
| |
| /* Now generate the IVs. */ |
| unsigned group_size = SLP_TREE_SCALAR_STMTS (slp_node).length (); |
| unsigned nvects = SLP_TREE_NUMBER_OF_VEC_STMTS (slp_node); |
| unsigned elts = const_nunits * nvects; |
| unsigned nivs = least_common_multiple (group_size, |
| const_nunits) / const_nunits; |
| gcc_assert (elts % group_size == 0); |
| tree elt = init_expr; |
| unsigned ivn; |
| for (ivn = 0; ivn < nivs; ++ivn) |
| { |
| tree_vector_builder elts (vectype, const_nunits, 1); |
| stmts = NULL; |
| for (unsigned eltn = 0; eltn < const_nunits; ++eltn) |
| { |
| if (ivn*const_nunits + eltn >= group_size |
| && (ivn * const_nunits + eltn) % group_size == 0) |
| elt = gimple_build (&stmts, PLUS_EXPR, TREE_TYPE (elt), |
| elt, step_expr); |
| elts.quick_push (elt); |
| } |
| vec_init = gimple_build_vector (&stmts, &elts); |
| if (stmts) |
| { |
| new_bb = gsi_insert_seq_on_edge_immediate (pe, stmts); |
| gcc_assert (!new_bb); |
| } |
| |
| /* Create the induction-phi that defines the induction-operand. */ |
| vec_dest = vect_get_new_vect_var (vectype, vect_simple_var, "vec_iv_"); |
| induction_phi = create_phi_node (vec_dest, iv_loop->header); |
| stmt_vec_info induction_phi_info |
| = loop_vinfo->add_stmt (induction_phi); |
| induc_def = PHI_RESULT (induction_phi); |
| |
| /* Create the iv update inside the loop */ |
| vec_def = make_ssa_name (vec_dest); |
| new_stmt = gimple_build_assign (vec_def, PLUS_EXPR, induc_def, vec_step); |
| gsi_insert_before (&si, new_stmt, GSI_SAME_STMT); |
| loop_vinfo->add_stmt (new_stmt); |
| |
| /* Set the arguments of the phi node: */ |
| add_phi_arg (induction_phi, vec_init, pe, UNKNOWN_LOCATION); |
| add_phi_arg (induction_phi, vec_def, loop_latch_edge (iv_loop), |
| UNKNOWN_LOCATION); |
| |
| SLP_TREE_VEC_STMTS (slp_node).quick_push (induction_phi_info); |
| } |
| |
| /* Re-use IVs when we can. */ |
| if (ivn < nvects) |
| { |
| unsigned vfp |
| = least_common_multiple (group_size, const_nunits) / group_size; |
| /* Generate [VF'*S, VF'*S, ... ]. */ |
| if (SCALAR_FLOAT_TYPE_P (TREE_TYPE (step_expr))) |
| { |
| expr = build_int_cst (integer_type_node, vfp); |
| expr = fold_convert (TREE_TYPE (step_expr), expr); |
| } |
| else |
| expr = build_int_cst (TREE_TYPE (step_expr), vfp); |
| new_name = fold_build2 (MULT_EXPR, TREE_TYPE (step_expr), |
| expr, step_expr); |
| if (! CONSTANT_CLASS_P (new_name)) |
| new_name = vect_init_vector (stmt_info, new_name, |
| TREE_TYPE (step_expr), NULL); |
| new_vec = build_vector_from_val (vectype, new_name); |
| vec_step = vect_init_vector (stmt_info, new_vec, vectype, NULL); |
| for (; ivn < nvects; ++ivn) |
| { |
| gimple *iv = SLP_TREE_VEC_STMTS (slp_node)[ivn - nivs]->stmt; |
| tree def; |
| if (gimple_code (iv) == GIMPLE_PHI) |
| def = gimple_phi_result (iv); |
| else |
| def = gimple_assign_lhs (iv); |
| new_stmt = gimple_build_assign (make_ssa_name (vectype), |
| PLUS_EXPR, |
| def, vec_step); |
| if (gimple_code (iv) == GIMPLE_PHI) |
| gsi_insert_before (&si, new_stmt, GSI_SAME_STMT); |
| else |
| { |
| gimple_stmt_iterator tgsi = gsi_for_stmt (iv); |
| gsi_insert_after (&tgsi, new_stmt, GSI_CONTINUE_LINKING); |
| } |
| SLP_TREE_VEC_STMTS (slp_node).quick_push |
| (loop_vinfo->add_stmt (new_stmt)); |
| } |
| } |
| |
| return true; |
| } |
| |
| /* Create the vector that holds the initial_value of the induction. */ |
| if (nested_in_vect_loop) |
| { |
| /* iv_loop is nested in the loop to be vectorized. init_expr had already |
| been created during vectorization of previous stmts. We obtain it |
| from the STMT_VINFO_VEC_STMT of the defining stmt. */ |
| vec_init = vect_get_vec_def_for_operand (init_expr, stmt_info); |
| /* If the initial value is not of proper type, convert it. */ |
| if (!useless_type_conversion_p (vectype, TREE_TYPE (vec_init))) |
| { |
| new_stmt |
| = gimple_build_assign (vect_get_new_ssa_name (vectype, |
| vect_simple_var, |
| "vec_iv_"), |
| VIEW_CONVERT_EXPR, |
| build1 (VIEW_CONVERT_EXPR, vectype, |
| vec_init)); |
| vec_init = gimple_assign_lhs (new_stmt); |
| new_bb = gsi_insert_on_edge_immediate (loop_preheader_edge (iv_loop), |
| new_stmt); |
| gcc_assert (!new_bb); |
| loop_vinfo->add_stmt (new_stmt); |
| } |
| } |
| else |
| { |
| /* iv_loop is the loop to be vectorized. Create: |
| vec_init = [X, X+S, X+2*S, X+3*S] (S = step_expr, X = init_expr) */ |
| stmts = NULL; |
| new_name = gimple_convert (&stmts, TREE_TYPE (vectype), init_expr); |
| |
| unsigned HOST_WIDE_INT const_nunits; |
| if (nunits.is_constant (&const_nunits)) |
| { |
| tree_vector_builder elts (vectype, const_nunits, 1); |
| elts.quick_push (new_name); |
| for (i = 1; i < const_nunits; i++) |
| { |
| /* Create: new_name_i = new_name + step_expr */ |
| new_name = gimple_build (&stmts, PLUS_EXPR, TREE_TYPE (new_name), |
| new_name, step_expr); |
| elts.quick_push (new_name); |
| } |
| /* Create a vector from [new_name_0, new_name_1, ..., |
| new_name_nunits-1] */ |
| vec_init = gimple_build_vector (&stmts, &elts); |
| } |
| else if (INTEGRAL_TYPE_P (TREE_TYPE (step_expr))) |
| /* Build the initial value directly from a VEC_SERIES_EXPR. */ |
| vec_init = gimple_build (&stmts, VEC_SERIES_EXPR, vectype, |
| new_name, step_expr); |
| else |
| { |
| /* Build: |
| [base, base, base, ...] |
| + (vectype) [0, 1, 2, ...] * [step, step, step, ...]. */ |
| gcc_assert (SCALAR_FLOAT_TYPE_P (TREE_TYPE (step_expr))); |
| gcc_assert (flag_associative_math); |
| tree index = build_index_vector (vectype, 0, 1); |
| tree base_vec = gimple_build_vector_from_val (&stmts, vectype, |
| new_name); |
| tree step_vec = gimple_build_vector_from_val (&stmts, vectype, |
| step_expr); |
| vec_init = gimple_build (&stmts, FLOAT_EXPR, vectype, index); |
| vec_init = gimple_build (&stmts, MULT_EXPR, vectype, |
| vec_init, step_vec); |
| vec_init = gimple_build (&stmts, PLUS_EXPR, vectype, |
| vec_init, base_vec); |
| } |
| |
| if (stmts) |
| { |
| new_bb = gsi_insert_seq_on_edge_immediate (pe, stmts); |
| gcc_assert (!new_bb); |
| } |
| } |
| |
| |
| /* Create the vector that holds the step of the induction. */ |
| if (nested_in_vect_loop) |
| /* iv_loop is nested in the loop to be vectorized. Generate: |
| vec_step = [S, S, S, S] */ |
| new_name = step_expr; |
| else |
| { |
| /* iv_loop is the loop to be vectorized. Generate: |
| vec_step = [VF*S, VF*S, VF*S, VF*S] */ |
| gimple_seq seq = NULL; |
| if (SCALAR_FLOAT_TYPE_P (TREE_TYPE (step_expr))) |
| { |
| expr = build_int_cst (integer_type_node, vf); |
| expr = gimple_build (&seq, FLOAT_EXPR, TREE_TYPE (step_expr), expr); |
| } |
| else |
| expr = build_int_cst (TREE_TYPE (step_expr), vf); |
| new_name = gimple_build (&seq, MULT_EXPR, TREE_TYPE (step_expr), |
| expr, step_expr); |
| if (seq) |
| { |
| new_bb = gsi_insert_seq_on_edge_immediate (pe, seq); |
| gcc_assert (!new_bb); |
| } |
| } |
| |
| t = unshare_expr (new_name); |
| gcc_assert (CONSTANT_CLASS_P (new_name) |
| || TREE_CODE (new_name) == SSA_NAME); |
| new_vec = build_vector_from_val (vectype, t); |
| vec_step = vect_init_vector (stmt_info, new_vec, vectype, NULL); |
| |
| |
| /* Create the following def-use cycle: |
| loop prolog: |
| vec_init = ... |
| vec_step = ... |
| loop: |
| vec_iv = PHI <vec_init, vec_loop> |
| ... |
| STMT |
| ... |
| vec_loop = vec_iv + vec_step; */ |
| |
| /* Create the induction-phi that defines the induction-operand. */ |
| vec_dest = vect_get_new_vect_var (vectype, vect_simple_var, "vec_iv_"); |
| induction_phi = create_phi_node (vec_dest, iv_loop->header); |
| stmt_vec_info induction_phi_info = loop_vinfo->add_stmt (induction_phi); |
| induc_def = PHI_RESULT (induction_phi); |
| |
| /* Create the iv update inside the loop */ |
| vec_def = make_ssa_name (vec_dest); |
| new_stmt = gimple_build_assign (vec_def, PLUS_EXPR, induc_def, vec_step); |
| gsi_insert_before (&si, new_stmt, GSI_SAME_STMT); |
| stmt_vec_info new_stmt_info = loop_vinfo->add_stmt (new_stmt); |
| |
| /* Set the arguments of the phi node: */ |
| add_phi_arg (induction_phi, vec_init, pe, UNKNOWN_LOCATION); |
| add_phi_arg (induction_phi, vec_def, loop_latch_edge (iv_loop), |
| UNKNOWN_LOCATION); |
| |
| STMT_VINFO_VEC_STMT (stmt_info) = *vec_stmt = induction_phi_info; |
| |
| /* In case that vectorization factor (VF) is bigger than the number |
| of elements that we can fit in a vectype (nunits), we have to generate |
| more than one vector stmt - i.e - we need to "unroll" the |
| vector stmt by a factor VF/nunits. For more details see documentation |
| in vectorizable_operation. */ |
| |
| if (ncopies > 1) |
| { |
| gimple_seq seq = NULL; |
| stmt_vec_info prev_stmt_vinfo; |
| /* FORNOW. This restriction should be relaxed. */ |
| gcc_assert (!nested_in_vect_loop); |
| |
| /* Create the vector that holds the step of the induction. */ |
| if (SCALAR_FLOAT_TYPE_P (TREE_TYPE (step_expr))) |
| { |
| expr = build_int_cst (integer_type_node, nunits); |
| expr = gimple_build (&seq, FLOAT_EXPR, TREE_TYPE (step_expr), expr); |
| } |
| else |
| expr = build_int_cst (TREE_TYPE (step_expr), nunits); |
| new_name = gimple_build (&seq, MULT_EXPR, TREE_TYPE (step_expr), |
| expr, step_expr); |
| if (seq) |
| { |
| new_bb = gsi_insert_seq_on_edge_immediate (pe, seq); |
| gcc_assert (!new_bb); |
| } |
| |
| t = unshare_expr (new_name); |
| gcc_assert (CONSTANT_CLASS_P (new_name) |
| || TREE_CODE (new_name) == SSA_NAME); |
| new_vec = build_vector_from_val (vectype, t); |
| vec_step = vect_init_vector (stmt_info, new_vec, vectype, NULL); |
| |
| vec_def = induc_def; |
| prev_stmt_vinfo = induction_phi_info; |
| for (i = 1; i < ncopies; i++) |
| { |
| /* vec_i = vec_prev + vec_step */ |
| new_stmt = gimple_build_assign (vec_dest, PLUS_EXPR, |
| vec_def, vec_step); |
| vec_def = make_ssa_name (vec_dest, new_stmt); |
| gimple_assign_set_lhs (new_stmt, vec_def); |
| |
| gsi_insert_before (&si, new_stmt, GSI_SAME_STMT); |
| new_stmt_info = loop_vinfo->add_stmt (new_stmt); |
| STMT_VINFO_RELATED_STMT (prev_stmt_vinfo) = new_stmt_info; |
| prev_stmt_vinfo = new_stmt_info; |
| } |
| } |
| |
| if (nested_in_vect_loop) |
| { |
| /* Find the loop-closed exit-phi of the induction, and record |
| the final vector of induction results: */ |
| exit_phi = NULL; |
| FOR_EACH_IMM_USE_FAST (use_p, imm_iter, loop_arg) |
| { |
| gimple *use_stmt = USE_STMT (use_p); |
| if (is_gimple_debug (use_stmt)) |
| continue; |
| |
| if (!flow_bb_inside_loop_p (iv_loop, gimple_bb (use_stmt))) |
| { |
| exit_phi = use_stmt; |
| break; |
| } |
| } |
| if (exit_phi) |
| { |
| stmt_vec_info stmt_vinfo = loop_vinfo->lookup_stmt (exit_phi); |
| /* FORNOW. Currently not supporting the case that an inner-loop induction |
| is not used in the outer-loop (i.e. only outside the outer-loop). */ |
| gcc_assert (STMT_VINFO_RELEVANT_P (stmt_vinfo) |
| && !STMT_VINFO_LIVE_P (stmt_vinfo)); |
| |
| STMT_VINFO_VEC_STMT (stmt_vinfo) = new_stmt_info; |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "vector of inductions after inner-loop:%G", |
| new_stmt); |
| } |
| } |
| |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "transform induction: created def-use cycle: %G%G", |
| induction_phi, SSA_NAME_DEF_STMT (vec_def)); |
| |
| return true; |
| } |
| |
| /* Function vectorizable_live_operation. |
| |
| STMT_INFO computes a value that is used outside the loop. Check if |
| it can be supported. */ |
| |
| bool |
| vectorizable_live_operation (stmt_vec_info stmt_info, |
| gimple_stmt_iterator *gsi ATTRIBUTE_UNUSED, |
| slp_tree slp_node, int slp_index, |
| stmt_vec_info *vec_stmt, |
| stmt_vector_for_cost *) |
| { |
| loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info); |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| imm_use_iterator imm_iter; |
| tree lhs, lhs_type, bitsize, vec_bitsize; |
| tree vectype = STMT_VINFO_VECTYPE (stmt_info); |
| poly_uint64 nunits = TYPE_VECTOR_SUBPARTS (vectype); |
| int ncopies; |
| gimple *use_stmt; |
| auto_vec<tree> vec_oprnds; |
| int vec_entry = 0; |
| poly_uint64 vec_index = 0; |
| |
| gcc_assert (STMT_VINFO_LIVE_P (stmt_info)); |
| |
| if (STMT_VINFO_DEF_TYPE (stmt_info) == vect_reduction_def) |
| return false; |
| |
| /* FORNOW. CHECKME. */ |
| if (nested_in_vect_loop_p (loop, stmt_info)) |
| return false; |
| |
| /* If STMT is not relevant and it is a simple assignment and its inputs are |
| invariant then it can remain in place, unvectorized. The original last |
| scalar value that it computes will be used. */ |
| if (!STMT_VINFO_RELEVANT_P (stmt_info)) |
| { |
| gcc_assert (is_simple_and_all_uses_invariant (stmt_info, loop_vinfo)); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "statement is simple and uses invariant. Leaving in " |
| "place.\n"); |
| return true; |
| } |
| |
| if (slp_node) |
| ncopies = 1; |
| else |
| ncopies = vect_get_num_copies (loop_vinfo, vectype); |
| |
| if (slp_node) |
| { |
| gcc_assert (slp_index >= 0); |
| |
| int num_scalar = SLP_TREE_SCALAR_STMTS (slp_node).length (); |
| int num_vec = SLP_TREE_NUMBER_OF_VEC_STMTS (slp_node); |
| |
| /* Get the last occurrence of the scalar index from the concatenation of |
| all the slp vectors. Calculate which slp vector it is and the index |
| within. */ |
| poly_uint64 pos = (num_vec * nunits) - num_scalar + slp_index; |
| |
| /* Calculate which vector contains the result, and which lane of |
| that vector we need. */ |
| if (!can_div_trunc_p (pos, nunits, &vec_entry, &vec_index)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "Cannot determine which vector holds the" |
| " final result.\n"); |
| return false; |
| } |
| } |
| |
| if (!vec_stmt) |
| { |
| /* No transformation required. */ |
| if (LOOP_VINFO_CAN_FULLY_MASK_P (loop_vinfo)) |
| { |
| if (!direct_internal_fn_supported_p (IFN_EXTRACT_LAST, vectype, |
| OPTIMIZE_FOR_SPEED)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "can't use a fully-masked loop because " |
| "the target doesn't support extract last " |
| "reduction.\n"); |
| LOOP_VINFO_CAN_FULLY_MASK_P (loop_vinfo) = false; |
| } |
| else if (slp_node) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "can't use a fully-masked loop because an " |
| "SLP statement is live after the loop.\n"); |
| LOOP_VINFO_CAN_FULLY_MASK_P (loop_vinfo) = false; |
| } |
| else if (ncopies > 1) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "can't use a fully-masked loop because" |
| " ncopies is greater than 1.\n"); |
| LOOP_VINFO_CAN_FULLY_MASK_P (loop_vinfo) = false; |
| } |
| else |
| { |
| gcc_assert (ncopies == 1 && !slp_node); |
| vect_record_loop_mask (loop_vinfo, |
| &LOOP_VINFO_MASKS (loop_vinfo), |
| 1, vectype); |
| } |
| } |
| return true; |
| } |
| |
| /* Use the lhs of the original scalar statement. */ |
| gimple *stmt = vect_orig_stmt (stmt_info)->stmt; |
| |
| lhs = (is_a <gphi *> (stmt)) ? gimple_phi_result (stmt) |
| : gimple_get_lhs (stmt); |
| lhs_type = TREE_TYPE (lhs); |
| |
| bitsize = (VECTOR_BOOLEAN_TYPE_P (vectype) |
| ? bitsize_int (TYPE_PRECISION (TREE_TYPE (vectype))) |
| : TYPE_SIZE (TREE_TYPE (vectype))); |
| vec_bitsize = TYPE_SIZE (vectype); |
| |
| /* Get the vectorized lhs of STMT and the lane to use (counted in bits). */ |
| tree vec_lhs, bitstart; |
| if (slp_node) |
| { |
| gcc_assert (!LOOP_VINFO_FULLY_MASKED_P (loop_vinfo)); |
| |
| /* Get the correct slp vectorized stmt. */ |
| gimple *vec_stmt = SLP_TREE_VEC_STMTS (slp_node)[vec_entry]->stmt; |
| if (gphi *phi = dyn_cast <gphi *> (vec_stmt)) |
| vec_lhs = gimple_phi_result (phi); |
| else |
| vec_lhs = gimple_get_lhs (vec_stmt); |
| |
| /* Get entry to use. */ |
| bitstart = bitsize_int (vec_index); |
| bitstart = int_const_binop (MULT_EXPR, bitsize, bitstart); |
| } |
| else |
| { |
| enum vect_def_type dt = STMT_VINFO_DEF_TYPE (stmt_info); |
| vec_lhs = vect_get_vec_def_for_operand_1 (stmt_info, dt); |
| gcc_checking_assert (ncopies == 1 |
| || !LOOP_VINFO_FULLY_MASKED_P (loop_vinfo)); |
| |
| /* For multiple copies, get the last copy. */ |
| for (int i = 1; i < ncopies; ++i) |
| vec_lhs = vect_get_vec_def_for_stmt_copy (loop_vinfo, vec_lhs); |
| |
| /* Get the last lane in the vector. */ |
| bitstart = int_const_binop (MINUS_EXPR, vec_bitsize, bitsize); |
| } |
| |
| gimple_seq stmts = NULL; |
| tree new_tree; |
| if (LOOP_VINFO_FULLY_MASKED_P (loop_vinfo)) |
| { |
| /* Emit: |
| |
| SCALAR_RES = EXTRACT_LAST <VEC_LHS, MASK> |
| |
| where VEC_LHS is the vectorized live-out result and MASK is |
| the loop mask for the final iteration. */ |
| gcc_assert (ncopies == 1 && !slp_node); |
| tree scalar_type = TREE_TYPE (STMT_VINFO_VECTYPE (stmt_info)); |
| tree mask = vect_get_loop_mask (gsi, &LOOP_VINFO_MASKS (loop_vinfo), |
| 1, vectype, 0); |
| tree scalar_res = gimple_build (&stmts, CFN_EXTRACT_LAST, |
| scalar_type, mask, vec_lhs); |
| |
| /* Convert the extracted vector element to the required scalar type. */ |
| new_tree = gimple_convert (&stmts, lhs_type, scalar_res); |
| } |
| else |
| { |
| tree bftype = TREE_TYPE (vectype); |
| if (VECTOR_BOOLEAN_TYPE_P (vectype)) |
| bftype = build_nonstandard_integer_type (tree_to_uhwi (bitsize), 1); |
| new_tree = build3 (BIT_FIELD_REF, bftype, vec_lhs, bitsize, bitstart); |
| new_tree = force_gimple_operand (fold_convert (lhs_type, new_tree), |
| &stmts, true, NULL_TREE); |
| } |
| |
| if (stmts) |
| gsi_insert_seq_on_edge_immediate (single_exit (loop), stmts); |
| |
| /* Replace use of lhs with newly computed result. If the use stmt is a |
| single arg PHI, just replace all uses of PHI result. It's necessary |
| because lcssa PHI defining lhs may be before newly inserted stmt. */ |
| use_operand_p use_p; |
| FOR_EACH_IMM_USE_STMT (use_stmt, imm_iter, lhs) |
| if (!flow_bb_inside_loop_p (loop, gimple_bb (use_stmt)) |
| && !is_gimple_debug (use_stmt)) |
| { |
| if (gimple_code (use_stmt) == GIMPLE_PHI |
| && gimple_phi_num_args (use_stmt) == 1) |
| { |
| replace_uses_by (gimple_phi_result (use_stmt), new_tree); |
| } |
| else |
| { |
| FOR_EACH_IMM_USE_ON_STMT (use_p, imm_iter) |
| SET_USE (use_p, new_tree); |
| } |
| update_stmt (use_stmt); |
| } |
| |
| return true; |
| } |
| |
| /* Kill any debug uses outside LOOP of SSA names defined in STMT_INFO. */ |
| |
| static void |
| vect_loop_kill_debug_uses (struct loop *loop, stmt_vec_info stmt_info) |
| { |
| ssa_op_iter op_iter; |
| imm_use_iterator imm_iter; |
| def_operand_p def_p; |
| gimple *ustmt; |
| |
| FOR_EACH_PHI_OR_STMT_DEF (def_p, stmt_info->stmt, op_iter, SSA_OP_DEF) |
| { |
| FOR_EACH_IMM_USE_STMT (ustmt, imm_iter, DEF_FROM_PTR (def_p)) |
| { |
| basic_block bb; |
| |
| if (!is_gimple_debug (ustmt)) |
| continue; |
| |
| bb = gimple_bb (ustmt); |
| |
| if (!flow_bb_inside_loop_p (loop, bb)) |
| { |
| if (gimple_debug_bind_p (ustmt)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "killing debug use\n"); |
| |
| gimple_debug_bind_reset_value (ustmt); |
| update_stmt (ustmt); |
| } |
| else |
| gcc_unreachable (); |
| } |
| } |
| } |
| } |
| |
| /* Given loop represented by LOOP_VINFO, return true if computation of |
| LOOP_VINFO_NITERS (= LOOP_VINFO_NITERSM1 + 1) doesn't overflow, false |
| otherwise. */ |
| |
| static bool |
| loop_niters_no_overflow (loop_vec_info loop_vinfo) |
| { |
| /* Constant case. */ |
| if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo)) |
| { |
| tree cst_niters = LOOP_VINFO_NITERS (loop_vinfo); |
| tree cst_nitersm1 = LOOP_VINFO_NITERSM1 (loop_vinfo); |
| |
| gcc_assert (TREE_CODE (cst_niters) == INTEGER_CST); |
| gcc_assert (TREE_CODE (cst_nitersm1) == INTEGER_CST); |
| if (wi::to_widest (cst_nitersm1) < wi::to_widest (cst_niters)) |
| return true; |
| } |
| |
| widest_int max; |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| /* Check the upper bound of loop niters. */ |
| if (get_max_loop_iterations (loop, &max)) |
| { |
| tree type = TREE_TYPE (LOOP_VINFO_NITERS (loop_vinfo)); |
| signop sgn = TYPE_SIGN (type); |
| widest_int type_max = widest_int::from (wi::max_value (type), sgn); |
| if (max < type_max) |
| return true; |
| } |
| return false; |
| } |
| |
| /* Return a mask type with half the number of elements as TYPE. */ |
| |
| tree |
| vect_halve_mask_nunits (tree type) |
| { |
| poly_uint64 nunits = exact_div (TYPE_VECTOR_SUBPARTS (type), 2); |
| return build_truth_vector_type (nunits, current_vector_size); |
| } |
| |
| /* Return a mask type with twice as many elements as TYPE. */ |
| |
| tree |
| vect_double_mask_nunits (tree type) |
| { |
| poly_uint64 nunits = TYPE_VECTOR_SUBPARTS (type) * 2; |
| return build_truth_vector_type (nunits, current_vector_size); |
| } |
| |
| /* Record that a fully-masked version of LOOP_VINFO would need MASKS to |
| contain a sequence of NVECTORS masks that each control a vector of type |
| VECTYPE. */ |
| |
| void |
| vect_record_loop_mask (loop_vec_info loop_vinfo, vec_loop_masks *masks, |
| unsigned int nvectors, tree vectype) |
| { |
| gcc_assert (nvectors != 0); |
| if (masks->length () < nvectors) |
| masks->safe_grow_cleared (nvectors); |
| rgroup_masks *rgm = &(*masks)[nvectors - 1]; |
| /* The number of scalars per iteration and the number of vectors are |
| both compile-time constants. */ |
| unsigned int nscalars_per_iter |
| = exact_div (nvectors * TYPE_VECTOR_SUBPARTS (vectype), |
| LOOP_VINFO_VECT_FACTOR (loop_vinfo)).to_constant (); |
| if (rgm->max_nscalars_per_iter < nscalars_per_iter) |
| { |
| rgm->max_nscalars_per_iter = nscalars_per_iter; |
| rgm->mask_type = build_same_sized_truth_vector_type (vectype); |
| } |
| } |
| |
| /* Given a complete set of masks MASKS, extract mask number INDEX |
| for an rgroup that operates on NVECTORS vectors of type VECTYPE, |
| where 0 <= INDEX < NVECTORS. Insert any set-up statements before GSI. |
| |
| See the comment above vec_loop_masks for more details about the mask |
| arrangement. */ |
| |
| tree |
| vect_get_loop_mask (gimple_stmt_iterator *gsi, vec_loop_masks *masks, |
| unsigned int nvectors, tree vectype, unsigned int index) |
| { |
| rgroup_masks *rgm = &(*masks)[nvectors - 1]; |
| tree mask_type = rgm->mask_type; |
| |
| /* Populate the rgroup's mask array, if this is the first time we've |
| used it. */ |
| if (rgm->masks.is_empty ()) |
| { |
| rgm->masks.safe_grow_cleared (nvectors); |
| for (unsigned int i = 0; i < nvectors; ++i) |
| { |
| tree mask = make_temp_ssa_name (mask_type, NULL, "loop_mask"); |
| /* Provide a dummy definition until the real one is available. */ |
| SSA_NAME_DEF_STMT (mask) = gimple_build_nop (); |
| rgm->masks[i] = mask; |
| } |
| } |
| |
| tree mask = rgm->masks[index]; |
| if (maybe_ne (TYPE_VECTOR_SUBPARTS (mask_type), |
| TYPE_VECTOR_SUBPARTS (vectype))) |
| { |
| /* A loop mask for data type X can be reused for data type Y |
| if X has N times more elements than Y and if Y's elements |
| are N times bigger than X's. In this case each sequence |
| of N elements in the loop mask will be all-zero or all-one. |
| We can then view-convert the mask so that each sequence of |
| N elements is replaced by a single element. */ |
| gcc_assert (multiple_p (TYPE_VECTOR_SUBPARTS (mask_type), |
| TYPE_VECTOR_SUBPARTS (vectype))); |
| gimple_seq seq = NULL; |
| mask_type = build_same_sized_truth_vector_type (vectype); |
| mask = gimple_build (&seq, VIEW_CONVERT_EXPR, mask_type, mask); |
| if (seq) |
| gsi_insert_seq_before (gsi, seq, GSI_SAME_STMT); |
| } |
| return mask; |
| } |
| |
| /* Scale profiling counters by estimation for LOOP which is vectorized |
| by factor VF. */ |
| |
| static void |
| scale_profile_for_vect_loop (struct loop *loop, unsigned vf) |
| { |
| edge preheader = loop_preheader_edge (loop); |
| /* Reduce loop iterations by the vectorization factor. */ |
| gcov_type new_est_niter = niter_for_unrolled_loop (loop, vf); |
| profile_count freq_h = loop->header->count, freq_e = preheader->count (); |
| |
| if (freq_h.nonzero_p ()) |
| { |
| profile_probability p; |
| |
| /* Avoid dropping loop body profile counter to 0 because of zero count |
| in loop's preheader. */ |
| if (!(freq_e == profile_count::zero ())) |
| freq_e = freq_e.force_nonzero (); |
| p = freq_e.apply_scale (new_est_niter + 1, 1).probability_in (freq_h); |
| scale_loop_frequencies (loop, p); |
| } |
| |
| edge exit_e = single_exit (loop); |
| exit_e->probability = profile_probability::always () |
| .apply_scale (1, new_est_niter + 1); |
| |
| edge exit_l = single_pred_edge (loop->latch); |
| profile_probability prob = exit_l->probability; |
| exit_l->probability = exit_e->probability.invert (); |
| if (prob.initialized_p () && exit_l->probability.initialized_p ()) |
| scale_bbs_frequencies (&loop->latch, 1, exit_l->probability / prob); |
| } |
| |
| /* Vectorize STMT_INFO if relevant, inserting any new instructions before GSI. |
| When vectorizing STMT_INFO as a store, set *SEEN_STORE to its |
| stmt_vec_info. */ |
| |
| static void |
| vect_transform_loop_stmt (loop_vec_info loop_vinfo, stmt_vec_info stmt_info, |
| gimple_stmt_iterator *gsi, stmt_vec_info *seen_store) |
| { |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| poly_uint64 vf = LOOP_VINFO_VECT_FACTOR (loop_vinfo); |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "------>vectorizing statement: %G", stmt_info->stmt); |
| |
| if (MAY_HAVE_DEBUG_BIND_STMTS && !STMT_VINFO_LIVE_P (stmt_info)) |
| vect_loop_kill_debug_uses (loop, stmt_info); |
| |
| if (!STMT_VINFO_RELEVANT_P (stmt_info) |
| && !STMT_VINFO_LIVE_P (stmt_info)) |
| return; |
| |
| if (STMT_VINFO_VECTYPE (stmt_info)) |
| { |
| poly_uint64 nunits |
| = TYPE_VECTOR_SUBPARTS (STMT_VINFO_VECTYPE (stmt_info)); |
| if (!STMT_SLP_TYPE (stmt_info) |
| && maybe_ne (nunits, vf) |
| && dump_enabled_p ()) |
| /* For SLP VF is set according to unrolling factor, and not |
| to vector size, hence for SLP this print is not valid. */ |
| dump_printf_loc (MSG_NOTE, vect_location, "multiple-types.\n"); |
| } |
| |
| /* Pure SLP statements have already been vectorized. We still need |
| to apply loop vectorization to hybrid SLP statements. */ |
| if (PURE_SLP_STMT (stmt_info)) |
| return; |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "transform statement.\n"); |
| |
| if (vect_transform_stmt (stmt_info, gsi, NULL, NULL)) |
| *seen_store = stmt_info; |
| } |
| |
| /* Function vect_transform_loop. |
| |
| The analysis phase has determined that the loop is vectorizable. |
| Vectorize the loop - created vectorized stmts to replace the scalar |
| stmts in the loop, and update the loop exit condition. |
| Returns scalar epilogue loop if any. */ |
| |
| struct loop * |
| vect_transform_loop (loop_vec_info loop_vinfo) |
| { |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| struct loop *epilogue = NULL; |
| basic_block *bbs = LOOP_VINFO_BBS (loop_vinfo); |
| int nbbs = loop->num_nodes; |
| int i; |
| tree niters_vector = NULL_TREE; |
| tree step_vector = NULL_TREE; |
| tree niters_vector_mult_vf = NULL_TREE; |
| poly_uint64 vf = LOOP_VINFO_VECT_FACTOR (loop_vinfo); |
| unsigned int lowest_vf = constant_lower_bound (vf); |
| gimple *stmt; |
| bool check_profitability = false; |
| unsigned int th; |
| |
| DUMP_VECT_SCOPE ("vec_transform_loop"); |
| |
| loop_vinfo->shared->check_datarefs (); |
| |
| /* Use the more conservative vectorization threshold. If the number |
| of iterations is constant assume the cost check has been performed |
| by our caller. If the threshold makes all loops profitable that |
| run at least the (estimated) vectorization factor number of times |
| checking is pointless, too. */ |
| th = LOOP_VINFO_COST_MODEL_THRESHOLD (loop_vinfo); |
| if (th >= vect_vf_for_cost (loop_vinfo) |
| && !LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Profitability threshold is %d loop iterations.\n", |
| th); |
| check_profitability = true; |
| } |
| |
| /* Make sure there exists a single-predecessor exit bb. Do this before |
| versioning. */ |
| edge e = single_exit (loop); |
| if (! single_pred_p (e->dest)) |
| { |
| split_loop_exit_edge (e, true); |
| if (dump_enabled_p ()) |
| dump_printf (MSG_NOTE, "split exit edge\n"); |
| } |
| |
| /* Version the loop first, if required, so the profitability check |
| comes first. */ |
| |
| if (LOOP_REQUIRES_VERSIONING (loop_vinfo)) |
| { |
| poly_uint64 versioning_threshold |
| = LOOP_VINFO_VERSIONING_THRESHOLD (loop_vinfo); |
| if (check_profitability |
| && ordered_p (poly_uint64 (th), versioning_threshold)) |
| { |
| versioning_threshold = ordered_max (poly_uint64 (th), |
| versioning_threshold); |
| check_profitability = false; |
| } |
| struct loop *sloop |
| = vect_loop_versioning (loop_vinfo, th, check_profitability, |
| versioning_threshold); |
| sloop->force_vectorize = false; |
| check_profitability = false; |
| } |
| |
| /* Make sure there exists a single-predecessor exit bb also on the |
| scalar loop copy. Do this after versioning but before peeling |
| so CFG structure is fine for both scalar and if-converted loop |
| to make slpeel_duplicate_current_defs_from_edges face matched |
| loop closed PHI nodes on the exit. */ |
| if (LOOP_VINFO_SCALAR_LOOP (loop_vinfo)) |
| { |
| e = single_exit (LOOP_VINFO_SCALAR_LOOP (loop_vinfo)); |
| if (! single_pred_p (e->dest)) |
| { |
| split_loop_exit_edge (e, true); |
| if (dump_enabled_p ()) |
| dump_printf (MSG_NOTE, "split exit edge of scalar loop\n"); |
| } |
| } |
| |
| tree niters = vect_build_loop_niters (loop_vinfo); |
| LOOP_VINFO_NITERS_UNCHANGED (loop_vinfo) = niters; |
| tree nitersm1 = unshare_expr (LOOP_VINFO_NITERSM1 (loop_vinfo)); |
| bool niters_no_overflow = loop_niters_no_overflow (loop_vinfo); |
| epilogue = vect_do_peeling (loop_vinfo, niters, nitersm1, &niters_vector, |
| &step_vector, &niters_vector_mult_vf, th, |
| check_profitability, niters_no_overflow); |
| |
| if (niters_vector == NULL_TREE) |
| { |
| if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo) |
| && !LOOP_VINFO_FULLY_MASKED_P (loop_vinfo) |
| && known_eq (lowest_vf, vf)) |
| { |
| niters_vector |
| = build_int_cst (TREE_TYPE (LOOP_VINFO_NITERS (loop_vinfo)), |
| LOOP_VINFO_INT_NITERS (loop_vinfo) / lowest_vf); |
| step_vector = build_one_cst (TREE_TYPE (niters)); |
| } |
| else |
| vect_gen_vector_loop_niters (loop_vinfo, niters, &niters_vector, |
| &step_vector, niters_no_overflow); |
| } |
| |
| /* 1) Make sure the loop header has exactly two entries |
| 2) Make sure we have a preheader basic block. */ |
| |
| gcc_assert (EDGE_COUNT (loop->header->preds) == 2); |
| |
| split_edge (loop_preheader_edge (loop)); |
| |
| if (LOOP_VINFO_FULLY_MASKED_P (loop_vinfo) |
| && vect_use_loop_mask_for_alignment_p (loop_vinfo)) |
| /* This will deal with any possible peeling. */ |
| vect_prepare_for_masked_peels (loop_vinfo); |
| |
| /* Schedule the SLP instances first, then handle loop vectorization |
| below. */ |
| if (!loop_vinfo->slp_instances.is_empty ()) |
| { |
| DUMP_VECT_SCOPE ("scheduling SLP instances"); |
| vect_schedule_slp (loop_vinfo); |
| } |
| |
| /* FORNOW: the vectorizer supports only loops which body consist |
| of one basic block (header + empty latch). When the vectorizer will |
| support more involved loop forms, the order by which the BBs are |
| traversed need to be reconsidered. */ |
| |
| for (i = 0; i < nbbs; i++) |
| { |
| basic_block bb = bbs[i]; |
| stmt_vec_info stmt_info; |
| |
| for (gphi_iterator si = gsi_start_phis (bb); !gsi_end_p (si); |
| gsi_next (&si)) |
| { |
| gphi *phi = si.phi (); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "------>vectorizing phi: %G", phi); |
| stmt_info = loop_vinfo->lookup_stmt (phi); |
| if (!stmt_info) |
| continue; |
| |
| if (MAY_HAVE_DEBUG_BIND_STMTS && !STMT_VINFO_LIVE_P (stmt_info)) |
| vect_loop_kill_debug_uses (loop, stmt_info); |
| |
| if (!STMT_VINFO_RELEVANT_P (stmt_info) |
| && !STMT_VINFO_LIVE_P (stmt_info)) |
| continue; |
| |
| if (STMT_VINFO_VECTYPE (stmt_info) |
| && (maybe_ne |
| (TYPE_VECTOR_SUBPARTS (STMT_VINFO_VECTYPE (stmt_info)), vf)) |
| && dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "multiple-types.\n"); |
| |
| if ((STMT_VINFO_DEF_TYPE (stmt_info) == vect_induction_def |
| || STMT_VINFO_DEF_TYPE (stmt_info) == vect_reduction_def |
| || STMT_VINFO_DEF_TYPE (stmt_info) == vect_nested_cycle) |
| && ! PURE_SLP_STMT (stmt_info)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "transform phi.\n"); |
| vect_transform_stmt (stmt_info, NULL, NULL, NULL); |
| } |
| } |
| |
| for (gimple_stmt_iterator si = gsi_start_bb (bb); |
| !gsi_end_p (si);) |
| { |
| stmt = gsi_stmt (si); |
| /* During vectorization remove existing clobber stmts. */ |
| if (gimple_clobber_p (stmt)) |
| { |
| unlink_stmt_vdef (stmt); |
| gsi_remove (&si, true); |
| release_defs (stmt); |
| } |
| else |
| { |
| stmt_info = loop_vinfo->lookup_stmt (stmt); |
| |
| /* vector stmts created in the outer-loop during vectorization of |
| stmts in an inner-loop may not have a stmt_info, and do not |
| need to be vectorized. */ |
| stmt_vec_info seen_store = NULL; |
| if (stmt_info) |
| { |
| if (STMT_VINFO_IN_PATTERN_P (stmt_info)) |
| { |
| gimple *def_seq = STMT_VINFO_PATTERN_DEF_SEQ (stmt_info); |
| for (gimple_stmt_iterator subsi = gsi_start (def_seq); |
| !gsi_end_p (subsi); gsi_next (&subsi)) |
| { |
| stmt_vec_info pat_stmt_info |
| = loop_vinfo->lookup_stmt (gsi_stmt (subsi)); |
| vect_transform_loop_stmt (loop_vinfo, pat_stmt_info, |
| &si, &seen_store); |
| } |
| stmt_vec_info pat_stmt_info |
| = STMT_VINFO_RELATED_STMT (stmt_info); |
| vect_transform_loop_stmt (loop_vinfo, pat_stmt_info, &si, |
| &seen_store); |
| } |
| vect_transform_loop_stmt (loop_vinfo, stmt_info, &si, |
| &seen_store); |
| } |
| gsi_next (&si); |
| if (seen_store) |
| { |
| if (STMT_VINFO_GROUPED_ACCESS (seen_store)) |
| /* Interleaving. If IS_STORE is TRUE, the |
| vectorization of the interleaving chain was |
| completed - free all the stores in the chain. */ |
| vect_remove_stores (DR_GROUP_FIRST_ELEMENT (seen_store)); |
| else |
| /* Free the attached stmt_vec_info and remove the stmt. */ |
| loop_vinfo->remove_stmt (stmt_info); |
| } |
| } |
| } |
| |
| /* Stub out scalar statements that must not survive vectorization. |
| Doing this here helps with grouped statements, or statements that |
| are involved in patterns. */ |
| for (gimple_stmt_iterator gsi = gsi_start_bb (bb); |
| !gsi_end_p (gsi); gsi_next (&gsi)) |
| { |
| gcall *call = dyn_cast <gcall *> (gsi_stmt (gsi)); |
| if (call && gimple_call_internal_p (call, IFN_MASK_LOAD)) |
| { |
| tree lhs = gimple_get_lhs (call); |
| if (!VECTOR_TYPE_P (TREE_TYPE (lhs))) |
| { |
| tree zero = build_zero_cst (TREE_TYPE (lhs)); |
| gimple *new_stmt = gimple_build_assign (lhs, zero); |
| gsi_replace (&gsi, new_stmt, true); |
| } |
| } |
| } |
| } /* BBs in loop */ |
| |
| /* The vectorization factor is always > 1, so if we use an IV increment of 1. |
| a zero NITERS becomes a nonzero NITERS_VECTOR. */ |
| if (integer_onep (step_vector)) |
| niters_no_overflow = true; |
| vect_set_loop_condition (loop, loop_vinfo, niters_vector, step_vector, |
| niters_vector_mult_vf, !niters_no_overflow); |
| |
| unsigned int assumed_vf = vect_vf_for_cost (loop_vinfo); |
| scale_profile_for_vect_loop (loop, assumed_vf); |
| |
| /* True if the final iteration might not handle a full vector's |
| worth of scalar iterations. */ |
| bool final_iter_may_be_partial = LOOP_VINFO_FULLY_MASKED_P (loop_vinfo); |
| /* The minimum number of iterations performed by the epilogue. This |
| is 1 when peeling for gaps because we always need a final scalar |
| iteration. */ |
| int min_epilogue_iters = LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo) ? 1 : 0; |
| /* +1 to convert latch counts to loop iteration counts, |
| -min_epilogue_iters to remove iterations that cannot be performed |
| by the vector code. */ |
| int bias_for_lowest = 1 - min_epilogue_iters; |
| int bias_for_assumed = bias_for_lowest; |
| int alignment_npeels = LOOP_VINFO_PEELING_FOR_ALIGNMENT (loop_vinfo); |
| if (alignment_npeels && LOOP_VINFO_FULLY_MASKED_P (loop_vinfo)) |
| { |
| /* When the amount of peeling is known at compile time, the first |
| iteration will have exactly alignment_npeels active elements. |
| In the worst case it will have at least one. */ |
| int min_first_active = (alignment_npeels > 0 ? alignment_npeels : 1); |
| bias_for_lowest += lowest_vf - min_first_active; |
| bias_for_assumed += assumed_vf - min_first_active; |
| } |
| /* In these calculations the "- 1" converts loop iteration counts |
| back to latch counts. */ |
| if (loop->any_upper_bound) |
| loop->nb_iterations_upper_bound |
| = (final_iter_may_be_partial |
| ? wi::udiv_ceil (loop->nb_iterations_upper_bound + bias_for_lowest, |
| lowest_vf) - 1 |
| : wi::udiv_floor (loop->nb_iterations_upper_bound + bias_for_lowest, |
| lowest_vf) - 1); |
| if (loop->any_likely_upper_bound) |
| loop->nb_iterations_likely_upper_bound |
| = (final_iter_may_be_partial |
| ? wi::udiv_ceil (loop->nb_iterations_likely_upper_bound |
| + bias_for_lowest, lowest_vf) - 1 |
| : wi::udiv_floor (loop->nb_iterations_likely_upper_bound |
| + bias_for_lowest, lowest_vf) - 1); |
| if (loop->any_estimate) |
| loop->nb_iterations_estimate |
| = (final_iter_may_be_partial |
| ? wi::udiv_ceil (loop->nb_iterations_estimate + bias_for_assumed, |
| assumed_vf) - 1 |
| : wi::udiv_floor (loop->nb_iterations_estimate + bias_for_assumed, |
| assumed_vf) - 1); |
| |
| if (dump_enabled_p ()) |
| { |
| if (!LOOP_VINFO_EPILOGUE_P (loop_vinfo)) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "LOOP VECTORIZED\n"); |
| if (loop->inner) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "OUTER LOOP VECTORIZED\n"); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| else |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "LOOP EPILOGUE VECTORIZED (VS="); |
| dump_dec (MSG_NOTE, current_vector_size); |
| dump_printf (MSG_NOTE, ")\n"); |
| } |
| } |
| |
| /* Loops vectorized with a variable factor won't benefit from |
| unrolling/peeling. */ |
| if (!vf.is_constant ()) |
| { |
| loop->unroll = 1; |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "Disabling unrolling due to" |
| " variable-length vectorization factor\n"); |
| } |
| /* Free SLP instances here because otherwise stmt reference counting |
| won't work. */ |
| slp_instance instance; |
| FOR_EACH_VEC_ELT (LOOP_VINFO_SLP_INSTANCES (loop_vinfo), i, instance) |
| vect_free_slp_instance (instance, true); |
| LOOP_VINFO_SLP_INSTANCES (loop_vinfo).release (); |
| /* Clear-up safelen field since its value is invalid after vectorization |
| since vectorized loop can have loop-carried dependencies. */ |
| loop->safelen = 0; |
| |
| /* Don't vectorize epilogue for epilogue. */ |
| if (LOOP_VINFO_EPILOGUE_P (loop_vinfo)) |
| epilogue = NULL; |
| |
| if (!PARAM_VALUE (PARAM_VECT_EPILOGUES_NOMASK)) |
| epilogue = NULL; |
| |
| if (epilogue) |
| { |
| auto_vector_sizes vector_sizes; |
| targetm.vectorize.autovectorize_vector_sizes (&vector_sizes, false); |
| unsigned int next_size = 0; |
| |
| /* Note LOOP_VINFO_NITERS_KNOWN_P and LOOP_VINFO_INT_NITERS work |
| on niters already ajusted for the iterations of the prologue. */ |
| if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo) |
| && known_eq (vf, lowest_vf)) |
| { |
| unsigned HOST_WIDE_INT eiters |
| = (LOOP_VINFO_INT_NITERS (loop_vinfo) |
| - LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo)); |
| eiters |
| = eiters % lowest_vf + LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo); |
| epilogue->nb_iterations_upper_bound = eiters - 1; |
| epilogue->any_upper_bound = true; |
| |
| unsigned int ratio; |
| while (next_size < vector_sizes.length () |
| && !(constant_multiple_p (current_vector_size, |
| vector_sizes[next_size], &ratio) |
| && eiters >= lowest_vf / ratio)) |
| next_size += 1; |
| } |
| else |
| while (next_size < vector_sizes.length () |
| && maybe_lt (current_vector_size, vector_sizes[next_size])) |
| next_size += 1; |
| |
| if (next_size == vector_sizes.length ()) |
| epilogue = NULL; |
| } |
| |
| if (epilogue) |
| { |
| epilogue->force_vectorize = loop->force_vectorize; |
| epilogue->safelen = loop->safelen; |
| epilogue->dont_vectorize = false; |
| |
| /* We may need to if-convert epilogue to vectorize it. */ |
| if (LOOP_VINFO_SCALAR_LOOP (loop_vinfo)) |
| tree_if_conversion (epilogue); |
| } |
| |
| return epilogue; |
| } |
| |
| /* The code below is trying to perform simple optimization - revert |
| if-conversion for masked stores, i.e. if the mask of a store is zero |
| do not perform it and all stored value producers also if possible. |
| For example, |
| for (i=0; i<n; i++) |
| if (c[i]) |
| { |
| p1[i] += 1; |
| p2[i] = p3[i] +2; |
| } |
| this transformation will produce the following semi-hammock: |
| |
| if (!mask__ifc__42.18_165 == { 0, 0, 0, 0, 0, 0, 0, 0 }) |
| { |
| vect__11.19_170 = MASK_LOAD (vectp_p1.20_168, 0B, mask__ifc__42.18_165); |
| vect__12.22_172 = vect__11.19_170 + vect_cst__171; |
| MASK_STORE (vectp_p1.23_175, 0B, mask__ifc__42.18_165, vect__12.22_172); |
| vect__18.25_182 = MASK_LOAD (vectp_p3.26_180, 0B, mask__ifc__42.18_165); |
| vect__19.28_184 = vect__18.25_182 + vect_cst__183; |
| MASK_STORE (vectp_p2.29_187, 0B, mask__ifc__42.18_165, vect__19.28_184); |
| } |
| */ |
| |
| void |
| optimize_mask_stores (struct loop *loop) |
| { |
| basic_block *bbs = get_loop_body (loop); |
| unsigned nbbs = loop->num_nodes; |
| unsigned i; |
| basic_block bb; |
| struct loop *bb_loop; |
| gimple_stmt_iterator gsi; |
| gimple *stmt; |
| auto_vec<gimple *> worklist; |
| auto_purge_vect_location sentinel; |
| |
| vect_location = find_loop_location (loop); |
| /* Pick up all masked stores in loop if any. */ |
| for (i = 0; i < nbbs; i++) |
| { |
| bb = bbs[i]; |
| for (gsi = gsi_start_bb (bb); !gsi_end_p (gsi); |
| gsi_next (&gsi)) |
| { |
| stmt = gsi_stmt (gsi); |
| if (gimple_call_internal_p (stmt, IFN_MASK_STORE)) |
| worklist.safe_push (stmt); |
| } |
| } |
| |
| free (bbs); |
| if (worklist.is_empty ()) |
| return; |
| |
| /* Loop has masked stores. */ |
| while (!worklist.is_empty ()) |
| { |
| gimple *last, *last_store; |
| edge e, efalse; |
| tree mask; |
| basic_block store_bb, join_bb; |
| gimple_stmt_iterator gsi_to; |
| tree vdef, new_vdef; |
| gphi *phi; |
| tree vectype; |
| tree zero; |
| |
| last = worklist.pop (); |
| mask = gimple_call_arg (last, 2); |
| bb = gimple_bb (last); |
| /* Create then_bb and if-then structure in CFG, then_bb belongs to |
| the same loop as if_bb. It could be different to LOOP when two |
| level loop-nest is vectorized and mask_store belongs to the inner |
| one. */ |
| e = split_block (bb, last); |
| bb_loop = bb->loop_father; |
| gcc_assert (loop == bb_loop || flow_loop_nested_p (loop, bb_loop)); |
| join_bb = e->dest; |
| store_bb = create_empty_bb (bb); |
| add_bb_to_loop (store_bb, bb_loop); |
| e->flags = EDGE_TRUE_VALUE; |
| efalse = make_edge (bb, store_bb, EDGE_FALSE_VALUE); |
| /* Put STORE_BB to likely part. */ |
| efalse->probability = profile_probability::unlikely (); |
| store_bb->count = efalse->count (); |
| make_single_succ_edge (store_bb, join_bb, EDGE_FALLTHRU); |
| if (dom_info_available_p (CDI_DOMINATORS)) |
| set_immediate_dominator (CDI_DOMINATORS, store_bb, bb); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Create new block %d to sink mask stores.", |
| store_bb->index); |
| /* Create vector comparison with boolean result. */ |
| vectype = TREE_TYPE (mask); |
| zero = build_zero_cst (vectype); |
| stmt = gimple_build_cond (EQ_EXPR, mask, zero, NULL_TREE, NULL_TREE); |
| gsi = gsi_last_bb (bb); |
| gsi_insert_after (&gsi, stmt, GSI_SAME_STMT); |
| /* Create new PHI node for vdef of the last masked store: |
| .MEM_2 = VDEF <.MEM_1> |
| will be converted to |
| .MEM.3 = VDEF <.MEM_1> |
| and new PHI node will be created in join bb |
| .MEM_2 = PHI <.MEM_1, .MEM_3> |
| */ |
| vdef = gimple_vdef (last); |
| new_vdef = make_ssa_name (gimple_vop (cfun), last); |
| gimple_set_vdef (last, new_vdef); |
| phi = create_phi_node (vdef, join_bb); |
| add_phi_arg (phi, new_vdef, EDGE_SUCC (store_bb, 0), UNKNOWN_LOCATION); |
| |
| /* Put all masked stores with the same mask to STORE_BB if possible. */ |
| while (true) |
| { |
| gimple_stmt_iterator gsi_from; |
| gimple *stmt1 = NULL; |
| |
| /* Move masked store to STORE_BB. */ |
| last_store = last; |
| gsi = gsi_for_stmt (last); |
| gsi_from = gsi; |
| /* Shift GSI to the previous stmt for further traversal. */ |
| gsi_prev (&gsi); |
| gsi_to = gsi_start_bb (store_bb); |
| gsi_move_before (&gsi_from, &gsi_to); |
| /* Setup GSI_TO to the non-empty block start. */ |
| gsi_to = gsi_start_bb (store_bb); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Move stmt to created bb\n%G", last); |
| /* Move all stored value producers if possible. */ |
| while (!gsi_end_p (gsi)) |
| { |
| tree lhs; |
| imm_use_iterator imm_iter; |
| use_operand_p use_p; |
| bool res; |
| |
| /* Skip debug statements. */ |
| if (is_gimple_debug (gsi_stmt (gsi))) |
| { |
| gsi_prev (&gsi); |
| continue; |
| } |
| stmt1 = gsi_stmt (gsi); |
| /* Do not consider statements writing to memory or having |
| volatile operand. */ |
| if (gimple_vdef (stmt1) |
| || gimple_has_volatile_ops (stmt1)) |
| break; |
| gsi_from = gsi; |
| gsi_prev (&gsi); |
| lhs = gimple_get_lhs (stmt1); |
| if (!lhs) |
| break; |
| |
| /* LHS of vectorized stmt must be SSA_NAME. */ |
| if (TREE_CODE (lhs) != SSA_NAME) |
| break; |
| |
| if (!VECTOR_TYPE_P (TREE_TYPE (lhs))) |
| { |
| /* Remove dead scalar statement. */ |
| if (has_zero_uses (lhs)) |
| { |
| gsi_remove (&gsi_from, true); |
| continue; |
| } |
| } |
| |
| /* Check that LHS does not have uses outside of STORE_BB. */ |
| res = true; |
| FOR_EACH_IMM_USE_FAST (use_p, imm_iter, lhs) |
| { |
| gimple *use_stmt; |
| use_stmt = USE_STMT (use_p); |
| if (is_gimple_debug (use_stmt)) |
| continue; |
| if (gimple_bb (use_stmt) != store_bb) |
| { |
| res = false; |
| break; |
| } |
| } |
| if (!res) |
| break; |
| |
| if (gimple_vuse (stmt1) |
| && gimple_vuse (stmt1) != gimple_vuse (last_store)) |
| break; |
| |
| /* Can move STMT1 to STORE_BB. */ |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Move stmt to created bb\n%G", stmt1); |
| gsi_move_before (&gsi_from, &gsi_to); |
| /* Shift GSI_TO for further insertion. */ |
| gsi_prev (&gsi_to); |
| } |
| /* Put other masked stores with the same mask to STORE_BB. */ |
| if (worklist.is_empty () |
| || gimple_call_arg (worklist.last (), 2) != mask |
| || worklist.last () != stmt1) |
| break; |
| last = worklist.pop (); |
| } |
| add_phi_arg (phi, gimple_vuse (last_store), e, UNKNOWN_LOCATION); |
| } |
| } |
| |
| /* Decide whether it is possible to use a zero-based induction variable |
| when vectorizing LOOP_VINFO with a fully-masked loop. If it is, |
| return the value that the induction variable must be able to hold |
| in order to ensure that the loop ends with an all-false mask. |
| Return -1 otherwise. */ |
| widest_int |
| vect_iv_limit_for_full_masking (loop_vec_info loop_vinfo) |
| { |
| tree niters_skip = LOOP_VINFO_MASK_SKIP_NITERS (loop_vinfo); |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| unsigned HOST_WIDE_INT max_vf = vect_max_vf (loop_vinfo); |
| |
| /* Calculate the value that the induction variable must be able |
| to hit in order to ensure that we end the loop with an all-false mask. |
| This involves adding the maximum number of inactive trailing scalar |
| iterations. */ |
| widest_int iv_limit = -1; |
| if (max_loop_iterations (loop, &iv_limit)) |
| { |
| if (niters_skip) |
| { |
| /* Add the maximum number of skipped iterations to the |
| maximum iteration count. */ |
| if (TREE_CODE (niters_skip) == INTEGER_CST) |
| iv_limit += wi::to_widest (niters_skip); |
| else |
| iv_limit += max_vf - 1; |
| } |
| else if (LOOP_VINFO_PEELING_FOR_ALIGNMENT (loop_vinfo)) |
| /* Make a conservatively-correct assumption. */ |
| iv_limit += max_vf - 1; |
| |
| /* IV_LIMIT is the maximum number of latch iterations, which is also |
| the maximum in-range IV value. Round this value down to the previous |
| vector alignment boundary and then add an extra full iteration. */ |
| poly_uint64 vf = LOOP_VINFO_VECT_FACTOR (loop_vinfo); |
| iv_limit = (iv_limit & -(int) known_alignment (vf)) + max_vf; |
| } |
| return iv_limit; |
| } |
| |