blob: 1cdacb7f480bb4498b2a6d05631e5bd743dc4a5a [file] [log] [blame]
/* Subroutines used for code generation on TI MSP430 processors.
Copyright (C) 2012-2021 Free Software Foundation, Inc.
Contributed by Red Hat.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3, or (at your option)
any later version.
GCC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING3. If not see
<http://www.gnu.org/licenses/>. */
#define IN_TARGET_CODE 1
#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "backend.h"
#include "target.h"
#include "rtl.h"
#include "tree.h"
#include "stringpool.h"
#include "attribs.h"
#include "gimple-expr.h"
#include "df.h"
#include "memmodel.h"
#include "tm_p.h"
#include "regs.h"
#include "emit-rtl.h"
#include "varasm.h"
#include "diagnostic-core.h"
#include "fold-const.h"
#include "stor-layout.h"
#include "calls.h"
#include "output.h"
#include "explow.h"
#include "expr.h"
#include "langhooks.h"
#include "builtins.h"
#include "intl.h"
#include "msp430-devices.h"
#include "incpath.h"
#include "prefix.h"
#include "insn-config.h"
#include "insn-attr.h"
#include "recog.h"
/* This file should be included last. */
#include "target-def.h"
static void msp430_compute_frame_info (void);
static bool msp430_use_16bit_hwmult (void);
static bool msp430_use_32bit_hwmult (void);
static bool use_helper_for_const_shift (machine_mode mode, HOST_WIDE_INT amt);
/* Run-time Target Specification. */
bool msp430x = true;
struct GTY(()) machine_function
{
/* If set, the rest of the fields have been computed. */
int computed;
/* Which registers need to be saved in the pro/epilogue. */
int need_to_save[FIRST_PSEUDO_REGISTER];
/* These fields describe the frame layout... */
/* arg pointer */
/* 2/4 bytes for saved PC */
int framesize_regs;
/* frame pointer */
int framesize_locals;
int framesize_outgoing;
/* stack pointer */
int framesize;
/* How much we adjust the stack when returning from an exception
handler. */
rtx eh_stack_adjust;
};
/* This is our init_machine_status, as set in
msp430_option_override. */
static struct machine_function *
msp430_init_machine_status (void)
{
struct machine_function *m;
m = ggc_cleared_alloc<machine_function> ();
return m;
}
#undef TARGET_OPTION_OVERRIDE
#define TARGET_OPTION_OVERRIDE msp430_option_override
/* Generate a C preprocessor symbol based upon the MCU selected by the user.
If a specific MCU has not been selected then return a generic symbol
instead. */
const char *
msp430_mcu_name (void)
{
if (target_mcu)
{
msp430_extract_mcu_data (target_mcu);
unsigned int i;
unsigned int start_upper;
unsigned int end_upper;
static char mcu_name[64];
/* The 'i' in the device name symbol for msp430i* devices must be lower
case, to match the expected symbol in msp430.h. */
if (startswith (target_mcu, "msp430i"))
{
snprintf (mcu_name, sizeof (mcu_name) - 1, "__MSP430i%s__",
target_mcu + 7);
start_upper = 9;
}
else
{
snprintf (mcu_name, sizeof (mcu_name) - 1, "__%s__", target_mcu);
start_upper = 2;
}
end_upper = strlen (mcu_name) - 2;
for (i = start_upper; i < end_upper; i++)
mcu_name[i] = TOUPPER (mcu_name[i]);
return mcu_name;
}
return msp430x ? "__MSP430XGENERIC__" : "__MSP430GENERIC__";
}
static const char *
hwmult_name (unsigned int val)
{
switch (val)
{
case 0: return "none";
case 1: return "16-bit";
case 2: return "16-bit";
case 4: return "32-bit";
case 8: return "32-bit (5xx)";
default: gcc_unreachable ();
}
}
static void
msp430_option_override (void)
{
/* The MSP430 architecture can safely dereference a NULL pointer. In fact,
there are memory mapped registers there. */
flag_delete_null_pointer_checks = 0;
init_machine_status = msp430_init_machine_status;
msp430x = target_cpu >= MSP430_CPU_MSP430X_DEFAULT;
if (target_mcu)
{
msp430_extract_mcu_data (target_mcu);
if (extracted_mcu_data.name != NULL)
{
bool xisa = extracted_mcu_data.revision >= 1;
if (msp430_warn_mcu)
{
if (target_cpu != MSP430_CPU_MSP430X_DEFAULT && msp430x != xisa)
warning (0, "MCU %qs supports %s ISA but %<-mcpu%> option "
"is set to %s",
target_mcu, xisa ? "430X" : "430",
msp430x ? "430X" : "430");
if (extracted_mcu_data.hwmpy == 0
&& msp430_hwmult_type != MSP430_HWMULT_AUTO
&& msp430_hwmult_type != MSP430_HWMULT_NONE)
warning (0, "MCU %qs does not have hardware multiply "
"support, but %<-mhwmult%> is set to %s",
target_mcu,
msp430_hwmult_type == MSP430_HWMULT_SMALL ? "16-bit"
: msp430_hwmult_type == MSP430_HWMULT_LARGE
? "32-bit" : "f5series");
else if (msp430_hwmult_type == MSP430_HWMULT_SMALL
&& extracted_mcu_data.hwmpy != 1
&& extracted_mcu_data.hwmpy != 2)
warning (0, "MCU %qs supports %s hardware multiply, "
"but %<-mhwmult%> is set to 16-bit",
target_mcu, hwmult_name (extracted_mcu_data.hwmpy));
else if (msp430_hwmult_type == MSP430_HWMULT_LARGE
&& extracted_mcu_data.hwmpy != 4)
warning (0, "MCU %qs supports %s hardware multiply, "
"but %<-mhwmult%> is set to 32-bit",
target_mcu, hwmult_name (extracted_mcu_data.hwmpy));
else if (msp430_hwmult_type == MSP430_HWMULT_F5SERIES
&& extracted_mcu_data.hwmpy != 8)
warning (0, "MCU %qs supports %s hardware multiply, "
"but %<-mhwmult%> is set to f5series",
target_mcu, hwmult_name (extracted_mcu_data.hwmpy));
}
/* Only override the default setting with the extracted ISA value if
the user has not passed -mcpu=. */
if (target_cpu == MSP430_CPU_MSP430X_DEFAULT)
msp430x = xisa;
}
else
{
if (msp430_hwmult_type == MSP430_HWMULT_AUTO)
{
if (msp430_warn_mcu)
{
if (target_cpu == MSP430_CPU_MSP430X_DEFAULT)
warning (0,
"Unrecognized MCU name %qs, assuming that it is "
"just a MSP430X with no hardware multiply.\n"
"Use the %<-mcpu%> and %<-mhwmult%> options to "
"set these explicitly.",
target_mcu);
else
warning (0,
"Unrecognized MCU name %qs, assuming that it "
"has no hardware multiply.\nUse the %<-mhwmult%> "
"option to set this explicitly.",
target_mcu);
}
msp430_hwmult_type = MSP430_HWMULT_NONE;
}
else if (target_cpu == MSP430_CPU_MSP430X_DEFAULT)
{
if (msp430_warn_mcu)
warning (0,
"Unrecognized MCU name %qs, assuming that it just "
"supports the MSP430X ISA.\nUse the %<-mcpu%> option "
"to set the ISA explicitly.",
target_mcu);
}
else if (msp430_warn_mcu)
warning (0, "Unrecognized MCU name %qs.", target_mcu);
}
}
if (TARGET_LARGE && !msp430x)
error ("%<-mlarge%> requires a 430X-compatible %<-mmcu=%>");
if (!TARGET_LARGE && msp430_code_region == MSP430_REGION_EITHER)
error ("%<-mcode-region=either%> requires the large memory model "
"(%<-mlarge%>)");
else if (!TARGET_LARGE && msp430_code_region == MSP430_REGION_UPPER)
error ("%<-mcode-region=upper%> requires the large memory model "
"(%<-mlarge%>)");
if (!TARGET_LARGE && msp430_data_region == MSP430_REGION_EITHER)
error ("%<-mdata-region=either%> requires the large memory model "
"(%<-mlarge%>)");
else if (!TARGET_LARGE && msp430_data_region == MSP430_REGION_UPPER)
error ("%<-mdata-region=upper%> requires the large memory model "
"(%<-mlarge%>)");
if (flag_exceptions || flag_non_call_exceptions
|| flag_unwind_tables || flag_asynchronous_unwind_tables)
flag_omit_frame_pointer = false;
else
flag_omit_frame_pointer = true;
/* This is a hack to work around a problem with the newlib build
mechanism. Newlib always appends CFLAGS to the end of the GCC
command line and always sets -O2 in CFLAGS. Thus it is not
possible to build newlib with -Os enabled. Until now... */
if (TARGET_OPT_SPACE && optimize < 3)
optimize_size = 1;
#if !DEFAULT_USE_CXA_ATEXIT
/* For some configurations, we use atexit () instead of __cxa_atexit () by
default to save on code size and remove the declaration of __dso_handle
from the CRT library.
Configuring GCC with --enable-__cxa-atexit re-enables it by defining
DEFAULT_USE_CXA_ATEXIT to 1. */
if (flag_use_cxa_atexit)
error ("%<-fuse-cxa-atexit%> is not supported for msp430-elf");
#endif
#ifndef HAVE_NEWLIB_NANO_FORMATTED_IO
if (TARGET_TINY_PRINTF)
error ("GCC must be configured with %<--enable-newlib-nano-formatted-io%> "
"to use %<-mtiny-printf%>");
#endif
}
#undef TARGET_SCALAR_MODE_SUPPORTED_P
#define TARGET_SCALAR_MODE_SUPPORTED_P msp430_scalar_mode_supported_p
static bool
msp430_scalar_mode_supported_p (scalar_mode m)
{
if (m == PSImode && msp430x)
return true;
#if 0
if (m == TImode)
return true;
#endif
return default_scalar_mode_supported_p (m);
}
/* Storage Layout */
#undef TARGET_MS_BITFIELD_LAYOUT_P
#define TARGET_MS_BITFIELD_LAYOUT_P msp430_ms_bitfield_layout_p
bool
msp430_ms_bitfield_layout_p (const_tree record_type ATTRIBUTE_UNUSED)
{
return false;
}
/* Register Usage */
#undef TARGET_HARD_REGNO_NREGS
#define TARGET_HARD_REGNO_NREGS msp430_hard_regno_nregs
static unsigned int
msp430_hard_regno_nregs (unsigned int, machine_mode mode)
{
if (mode == PSImode && msp430x)
return 1;
if (mode == CPSImode && msp430x)
return 2;
return ((GET_MODE_SIZE (mode) + UNITS_PER_WORD - 1)
/ UNITS_PER_WORD);
}
/* subreg_get_info correctly handles PSImode registers, so defining
HARD_REGNO_NREGS_HAS_PADDING and HARD_REGNO_NREGS_WITH_PADDING
has no effect. */
#undef TARGET_HARD_REGNO_MODE_OK
#define TARGET_HARD_REGNO_MODE_OK msp430_hard_regno_mode_ok
static bool
msp430_hard_regno_mode_ok (unsigned int regno, machine_mode mode)
{
return regno <= (ARG_POINTER_REGNUM
- (unsigned int) msp430_hard_regno_nregs (regno, mode));
}
#undef TARGET_MODES_TIEABLE_P
#define TARGET_MODES_TIEABLE_P msp430_modes_tieable_p
static bool
msp430_modes_tieable_p (machine_mode mode1, machine_mode mode2)
{
if ((mode1 == PSImode || mode2 == SImode)
|| (mode1 == SImode || mode2 == PSImode))
return false;
return ((GET_MODE_CLASS (mode1) == MODE_FLOAT
|| GET_MODE_CLASS (mode1) == MODE_COMPLEX_FLOAT)
== (GET_MODE_CLASS (mode2) == MODE_FLOAT
|| GET_MODE_CLASS (mode2) == MODE_COMPLEX_FLOAT));
}
#undef TARGET_FRAME_POINTER_REQUIRED
#define TARGET_FRAME_POINTER_REQUIRED msp430_frame_pointer_required
static bool
msp430_frame_pointer_required (void)
{
return false;
}
#undef TARGET_CAN_ELIMINATE
#define TARGET_CAN_ELIMINATE msp430_can_eliminate
static bool
msp430_can_eliminate (const int from_reg ATTRIBUTE_UNUSED,
const int to_reg ATTRIBUTE_UNUSED)
{
return true;
}
/* Implements INITIAL_ELIMINATION_OFFSET. */
int
msp430_initial_elimination_offset (int from, int to)
{
int rv = 0; /* As if arg to arg. */
msp430_compute_frame_info ();
switch (to)
{
case STACK_POINTER_REGNUM:
rv += cfun->machine->framesize_outgoing;
rv += cfun->machine->framesize_locals;
/* Fall through. */
case FRAME_POINTER_REGNUM:
rv += cfun->machine->framesize_regs;
/* Allow for the saved return address. */
rv += (TARGET_LARGE ? 4 : 2);
/* NB/ No need to allow for crtl->args.pretend_args_size.
GCC does that for us. */
break;
default:
gcc_unreachable ();
}
switch (from)
{
case FRAME_POINTER_REGNUM:
/* Allow for the fall through above. */
rv -= (TARGET_LARGE ? 4 : 2);
rv -= cfun->machine->framesize_regs;
case ARG_POINTER_REGNUM:
break;
default:
gcc_unreachable ();
}
return rv;
}
/* Named Address Space support */
/* Return the appropriate mode for a named address pointer. */
#undef TARGET_ADDR_SPACE_POINTER_MODE
#define TARGET_ADDR_SPACE_POINTER_MODE msp430_addr_space_pointer_mode
#undef TARGET_ADDR_SPACE_ADDRESS_MODE
#define TARGET_ADDR_SPACE_ADDRESS_MODE msp430_addr_space_pointer_mode
static scalar_int_mode
msp430_addr_space_pointer_mode (addr_space_t addrspace)
{
switch (addrspace)
{
default:
case ADDR_SPACE_GENERIC:
return Pmode;
case ADDR_SPACE_NEAR:
return HImode;
case ADDR_SPACE_FAR:
return PSImode;
}
}
/* Function pointers are stored in unwind_word sized
variables, so make sure that unwind_word is big enough. */
#undef TARGET_UNWIND_WORD_MODE
#define TARGET_UNWIND_WORD_MODE msp430_unwind_word_mode
static scalar_int_mode
msp430_unwind_word_mode (void)
{
/* This needs to match msp430_init_dwarf_reg_sizes_extra (below). */
return msp430x ? PSImode : HImode;
}
/* Determine if one named address space is a subset of another. */
#undef TARGET_ADDR_SPACE_SUBSET_P
#define TARGET_ADDR_SPACE_SUBSET_P msp430_addr_space_subset_p
static bool
msp430_addr_space_subset_p (addr_space_t subset, addr_space_t superset)
{
if (subset == superset)
return true;
else
return (subset != ADDR_SPACE_FAR && superset == ADDR_SPACE_FAR);
}
#undef TARGET_ADDR_SPACE_CONVERT
#define TARGET_ADDR_SPACE_CONVERT msp430_addr_space_convert
/* Convert from one address space to another. */
static rtx
msp430_addr_space_convert (rtx op, tree from_type, tree to_type)
{
addr_space_t from_as = TYPE_ADDR_SPACE (TREE_TYPE (from_type));
addr_space_t to_as = TYPE_ADDR_SPACE (TREE_TYPE (to_type));
rtx result;
if (to_as != ADDR_SPACE_FAR && from_as == ADDR_SPACE_FAR)
{
/* This is unpredictable, as we're truncating off usable address
bits. */
if (CONSTANT_P (op))
return gen_rtx_CONST (HImode, op);
result = gen_reg_rtx (HImode);
emit_insn (gen_truncpsihi2 (result, op));
return result;
}
else if (to_as == ADDR_SPACE_FAR && from_as != ADDR_SPACE_FAR)
{
/* This always works. */
if (CONSTANT_P (op))
return gen_rtx_CONST (PSImode, op);
result = gen_reg_rtx (PSImode);
emit_insn (gen_zero_extendhipsi2 (result, op));
return result;
}
else
gcc_unreachable ();
}
/* Stack Layout and Calling Conventions. */
/* For each function, we list the gcc version and the TI version on
each line, where we're converting the function names. */
static char const * const special_convention_function_names[] =
{
"__muldi3", "__mspabi_mpyll",
"__udivdi3", "__mspabi_divull",
"__umoddi3", "__mspabi_remull",
"__divdi3", "__mspabi_divlli",
"__moddi3", "__mspabi_remlli",
"__mspabi_srall",
"__mspabi_srlll",
"__mspabi_sllll",
"__adddf3", "__mspabi_addd",
"__subdf3", "__mspabi_subd",
"__muldf3", "__mspabi_mpyd",
"__divdf3", "__mspabi_divd",
"__mspabi_cmpd",
NULL
};
/* TRUE if the function passed is a "speical" function. Special
functions pass two DImode parameters in registers. */
static bool
msp430_special_register_convention_p (const char *name)
{
int i;
for (i = 0; special_convention_function_names[i]; i++)
if (!strcmp (name, special_convention_function_names[i]))
return true;
return false;
}
#undef TARGET_FUNCTION_VALUE_REGNO_P
#define TARGET_FUNCTION_VALUE_REGNO_P msp430_function_value_regno_p
bool
msp430_function_value_regno_p (unsigned int regno)
{
return regno == 12;
}
#undef TARGET_FUNCTION_VALUE
#define TARGET_FUNCTION_VALUE msp430_function_value
rtx
msp430_function_value (const_tree ret_type,
const_tree fn_decl_or_type ATTRIBUTE_UNUSED,
bool outgoing ATTRIBUTE_UNUSED)
{
return gen_rtx_REG (TYPE_MODE (ret_type), 12);
}
#undef TARGET_LIBCALL_VALUE
#define TARGET_LIBCALL_VALUE msp430_libcall_value
rtx
msp430_libcall_value (machine_mode mode, const_rtx fun ATTRIBUTE_UNUSED)
{
return gen_rtx_REG (mode, 12);
}
/* Implements INIT_CUMULATIVE_ARGS. */
void
msp430_init_cumulative_args (CUMULATIVE_ARGS *ca,
tree fntype ATTRIBUTE_UNUSED,
rtx libname ATTRIBUTE_UNUSED,
tree fndecl ATTRIBUTE_UNUSED,
int n_named_args ATTRIBUTE_UNUSED)
{
const char *fname;
memset (ca, 0, sizeof(*ca));
ca->can_split = 1;
if (fndecl)
fname = IDENTIFIER_POINTER (DECL_NAME (fndecl));
else if (libname)
fname = XSTR (libname, 0);
else
fname = NULL;
if (fname && msp430_special_register_convention_p (fname))
ca->special_p = 1;
}
/* Helper function for argument passing; this function is the common
code that determines where an argument will be passed. */
static void
msp430_evaluate_arg (cumulative_args_t cap,
machine_mode mode,
const_tree type ATTRIBUTE_UNUSED,
bool named)
{
CUMULATIVE_ARGS *ca = get_cumulative_args (cap);
int nregs = GET_MODE_SIZE (mode);
int i;
ca->reg_count = 0;
ca->mem_count = 0;
if (!named)
return;
if (mode == PSImode)
nregs = 1;
else
nregs = (nregs + 1) / 2;
if (ca->special_p)
{
/* Function is passed two DImode operands, in R8:R11 and
R12:15. */
ca->start_reg = 8;
ca->reg_count = 4;
return;
}
switch (nregs)
{
case 1:
for (i = 0; i < 4; i++)
if (!ca->reg_used[i])
{
ca->reg_count = 1;
ca->start_reg = CA_FIRST_REG + i;
return;
}
break;
case 2:
for (i = 0; i < 3; i++)
if (!ca->reg_used[i] && !ca->reg_used[i + 1])
{
ca->reg_count = 2;
ca->start_reg = CA_FIRST_REG + i;
return;
}
if (!ca->reg_used[3] && ca->can_split)
{
ca->reg_count = 1;
ca->mem_count = 2;
ca->start_reg = CA_FIRST_REG + 3;
return;
}
break;
case 3:
case 4:
ca->can_split = 0;
if (!ca->reg_used[0]
&& !ca->reg_used[1]
&& !ca->reg_used[2]
&& !ca->reg_used[3])
{
ca->reg_count = 4;
ca->start_reg = CA_FIRST_REG;
return;
}
break;
}
}
#undef TARGET_PROMOTE_PROTOTYPES
#define TARGET_PROMOTE_PROTOTYPES msp430_promote_prototypes
bool
msp430_promote_prototypes (const_tree fntype ATTRIBUTE_UNUSED)
{
return false;
}
#undef TARGET_FUNCTION_ARG
#define TARGET_FUNCTION_ARG msp430_function_arg
rtx
msp430_function_arg (cumulative_args_t cap,
const function_arg_info &arg)
{
CUMULATIVE_ARGS *ca = get_cumulative_args (cap);
msp430_evaluate_arg (cap, arg.mode, arg.type, arg.named);
if (ca->reg_count)
return gen_rtx_REG (arg.mode, ca->start_reg);
return 0;
}
#undef TARGET_ARG_PARTIAL_BYTES
#define TARGET_ARG_PARTIAL_BYTES msp430_arg_partial_bytes
int
msp430_arg_partial_bytes (cumulative_args_t cap, const function_arg_info &arg)
{
CUMULATIVE_ARGS *ca = get_cumulative_args (cap);
msp430_evaluate_arg (cap, arg.mode, arg.type, arg.named);
if (ca->reg_count && ca->mem_count)
return ca->reg_count * UNITS_PER_WORD;
return 0;
}
#undef TARGET_PASS_BY_REFERENCE
#define TARGET_PASS_BY_REFERENCE msp430_pass_by_reference
static bool
msp430_pass_by_reference (cumulative_args_t, const function_arg_info &arg)
{
return (arg.mode == BLKmode
|| (arg.type && TREE_CODE (arg.type) == RECORD_TYPE)
|| (arg.type && TREE_CODE (arg.type) == UNION_TYPE));
}
#undef TARGET_CALLEE_COPIES
#define TARGET_CALLEE_COPIES hook_bool_CUMULATIVE_ARGS_arg_info_true
#undef TARGET_FUNCTION_ARG_ADVANCE
#define TARGET_FUNCTION_ARG_ADVANCE msp430_function_arg_advance
void
msp430_function_arg_advance (cumulative_args_t cap,
const function_arg_info &arg)
{
CUMULATIVE_ARGS *ca = get_cumulative_args (cap);
int i;
msp430_evaluate_arg (cap, arg.mode, arg.type, arg.named);
if (ca->start_reg >= CA_FIRST_REG)
for (i = 0; i < ca->reg_count; i ++)
ca->reg_used[i + ca->start_reg - CA_FIRST_REG] = 1;
ca->special_p = 0;
}
#undef TARGET_FUNCTION_ARG_BOUNDARY
#define TARGET_FUNCTION_ARG_BOUNDARY msp430_function_arg_boundary
static unsigned int
msp430_function_arg_boundary (machine_mode mode, const_tree type)
{
if (mode == BLKmode
&& int_size_in_bytes (type) > 1)
return 16;
if (GET_MODE_BITSIZE (mode) > 8)
return 16;
return 8;
}
#undef TARGET_RETURN_IN_MEMORY
#define TARGET_RETURN_IN_MEMORY msp430_return_in_memory
static bool
msp430_return_in_memory (const_tree ret_type,
const_tree fntype ATTRIBUTE_UNUSED)
{
machine_mode mode = TYPE_MODE (ret_type);
if (mode == BLKmode
|| (fntype && TREE_CODE (TREE_TYPE (fntype)) == RECORD_TYPE)
|| (fntype && TREE_CODE (TREE_TYPE (fntype)) == UNION_TYPE))
return true;
if (GET_MODE_SIZE (mode) > 8)
return true;
return false;
}
#undef TARGET_GET_RAW_ARG_MODE
#define TARGET_GET_RAW_ARG_MODE msp430_get_raw_arg_mode
static fixed_size_mode
msp430_get_raw_arg_mode (int regno)
{
return as_a <fixed_size_mode> (regno == ARG_POINTER_REGNUM
? VOIDmode : Pmode);
}
#undef TARGET_GET_RAW_RESULT_MODE
#define TARGET_GET_RAW_RESULT_MODE msp430_get_raw_result_mode
static fixed_size_mode
msp430_get_raw_result_mode (int regno ATTRIBUTE_UNUSED)
{
return Pmode;
}
#undef TARGET_GIMPLIFY_VA_ARG_EXPR
#define TARGET_GIMPLIFY_VA_ARG_EXPR msp430_gimplify_va_arg_expr
#include "gimplify.h"
static tree
msp430_gimplify_va_arg_expr (tree valist, tree type, gimple_seq *pre_p,
gimple_seq *post_p)
{
tree addr, t, type_size, rounded_size, valist_tmp;
unsigned HOST_WIDE_INT align, boundary;
bool indirect;
indirect = pass_va_arg_by_reference (type);
if (indirect)
type = build_pointer_type (type);
align = PARM_BOUNDARY / BITS_PER_UNIT;
boundary = targetm.calls.function_arg_boundary (TYPE_MODE (type), type);
/* When we align parameter on stack for caller, if the parameter
alignment is beyond MAX_SUPPORTED_STACK_ALIGNMENT, it will be
aligned at MAX_SUPPORTED_STACK_ALIGNMENT. We will match callee
here with caller. */
if (boundary > MAX_SUPPORTED_STACK_ALIGNMENT)
boundary = MAX_SUPPORTED_STACK_ALIGNMENT;
boundary /= BITS_PER_UNIT;
/* Hoist the valist value into a temporary for the moment. */
valist_tmp = get_initialized_tmp_var (valist, pre_p, NULL);
/* va_list pointer is aligned to PARM_BOUNDARY. If argument actually
requires greater alignment, we must perform dynamic alignment. */
if (boundary > align
&& !integer_zerop (TYPE_SIZE (type)))
{
/* FIXME: This is where this function diverts from targhooks.c:
std_gimplify_va_arg_expr(). It works, but I do not know why... */
if (! POINTER_TYPE_P (type))
{
t = build2 (MODIFY_EXPR, TREE_TYPE (valist), valist_tmp,
fold_build_pointer_plus_hwi (valist_tmp, boundary - 1));
gimplify_and_add (t, pre_p);
t = build2 (MODIFY_EXPR, TREE_TYPE (valist), valist_tmp,
fold_build2 (BIT_AND_EXPR, TREE_TYPE (valist),
valist_tmp,
build_int_cst (TREE_TYPE (valist),
-boundary)));
gimplify_and_add (t, pre_p);
}
}
else
boundary = align;
/* If the actual alignment is less than the alignment of the type,
adjust the type accordingly so that we don't assume strict alignment
when dereferencing the pointer. */
boundary *= BITS_PER_UNIT;
if (boundary < TYPE_ALIGN (type))
{
type = build_variant_type_copy (type);
SET_TYPE_ALIGN (type, boundary);
}
/* Compute the rounded size of the type. */
type_size = size_in_bytes (type);
rounded_size = round_up (type_size, align);
/* Reduce rounded_size so it's sharable with the postqueue. */
gimplify_expr (&rounded_size, pre_p, post_p, is_gimple_val, fb_rvalue);
/* Get AP. */
addr = valist_tmp;
/* Compute new value for AP. */
t = fold_build_pointer_plus (valist_tmp, rounded_size);
t = build2 (MODIFY_EXPR, TREE_TYPE (valist), valist, t);
gimplify_and_add (t, pre_p);
addr = fold_convert (build_pointer_type (type), addr);
if (indirect)
addr = build_va_arg_indirect_ref (addr);
addr = build_va_arg_indirect_ref (addr);
return addr;
}
#undef TARGET_LRA_P
#define TARGET_LRA_P hook_bool_void_false
/* Addressing Modes */
#undef TARGET_LEGITIMATE_ADDRESS_P
#define TARGET_LEGITIMATE_ADDRESS_P msp430_legitimate_address_p
static bool
reg_ok_for_addr (rtx r, bool strict)
{
int rn = REGNO (r);
if (strict && rn >= FIRST_PSEUDO_REGISTER)
rn = reg_renumber[rn];
if (strict && 0 <= rn && rn < FIRST_PSEUDO_REGISTER)
return true;
if (!strict)
return true;
return false;
}
bool
msp430_legitimate_address_p (machine_mode mode ATTRIBUTE_UNUSED,
rtx x ATTRIBUTE_UNUSED,
bool strict ATTRIBUTE_UNUSED)
{
switch (GET_CODE (x))
{
case MEM:
return false;
case PLUS:
case POST_INC:
if (REG_P (XEXP (x, 0)))
{
if (GET_MODE (x) != GET_MODE (XEXP (x, 0)))
return false;
if (!reg_ok_for_addr (XEXP (x, 0), strict))
return false;
if (GET_CODE (x) == POST_INC)
/* At this point, if the original rtx was a post_inc, we don't have
anything further to check. */
return true;
switch (GET_CODE (XEXP (x, 1)))
{
case CONST:
case SYMBOL_REF:
case CONST_INT:
return true;
default:
return false;
}
}
return false;
case REG:
if (!reg_ok_for_addr (x, strict))
return false;
/* FALLTHRU */
case CONST:
case SYMBOL_REF:
case CONST_INT:
return true;
default:
return false;
}
}
#undef TARGET_ADDR_SPACE_LEGITIMATE_ADDRESS_P
#define TARGET_ADDR_SPACE_LEGITIMATE_ADDRESS_P \
msp430_addr_space_legitimate_address_p
bool
msp430_addr_space_legitimate_address_p (machine_mode mode,
rtx x,
bool strict,
addr_space_t as ATTRIBUTE_UNUSED)
{
return msp430_legitimate_address_p (mode, x, strict);
}
#undef TARGET_ASM_INTEGER
#define TARGET_ASM_INTEGER msp430_asm_integer
static bool
msp430_asm_integer (rtx x, unsigned int size, int aligned_p)
{
int c = GET_CODE (x);
if (size == 3 && GET_MODE (x) == PSImode)
size = 4;
switch (size)
{
case 4:
if (c == SYMBOL_REF || c == CONST || c == LABEL_REF || c == CONST_INT
|| c == PLUS || c == MINUS)
{
fprintf (asm_out_file, "\t.long\t");
output_addr_const (asm_out_file, x);
fputc ('\n', asm_out_file);
return true;
}
break;
}
return default_assemble_integer (x, size, aligned_p);
}
#undef TARGET_ASM_OUTPUT_ADDR_CONST_EXTRA
#define TARGET_ASM_OUTPUT_ADDR_CONST_EXTRA msp430_asm_output_addr_const_extra
static bool
msp430_asm_output_addr_const_extra (FILE *file ATTRIBUTE_UNUSED, rtx x)
{
debug_rtx (x);
return false;
}
#undef TARGET_LEGITIMATE_CONSTANT_P
#define TARGET_LEGITIMATE_CONSTANT_P msp430_legitimate_constant
static bool
msp430_legitimate_constant (machine_mode mode, rtx x)
{
return ! CONST_INT_P (x)
|| mode != PSImode
/* GCC does not know the width of the PSImode, so make
sure that it does not try to use a constant value that
is out of range. */
|| (INTVAL (x) < (1 << 20)
&& INTVAL (x) >= (HOST_WIDE_INT)(HOST_WIDE_INT_M1U << 20));
}
/* Describing Relative Costs of Operations
To model the cost of an instruction, use the number of cycles when
optimizing for speed, and the number of words when optimizing for size.
The cheapest instruction will execute in one cycle and cost one word.
The cycle and size costs correspond to 430 ISA instructions, not 430X
instructions or 430X "address" instructions. The relative costs of 430X
instructions is accurately modeled with the 430 costs. The relative costs
of some "address" instructions can differ, but these are not yet handled.
Adding support for this could improve performance/code size. */
struct single_op_cost
{
const int reg;
/* Indirect register (@Rn) or indirect autoincrement (@Rn+). */
const int ind;
const int mem;
};
static const struct single_op_cost cycle_cost_single_op =
{
1, 3, 4
};
static const struct single_op_cost size_cost_single_op =
{
1, 1, 2
};
/* When the destination of an insn is memory, the cost is always the same
regardless of whether that memory is accessed using indirect register,
indexed or absolute addressing.
When the source operand is memory, indirect register and post-increment have
the same cost, which is lower than indexed and absolute, which also have
the same cost. */
struct double_op_cost
{
/* Source operand is a register. */
const int r2r;
const int r2pc;
const int r2m;
/* Source operand is memory, using indirect register (@Rn) or indirect
autoincrement (@Rn+) addressing modes. */
const int ind2r;
const int ind2pc;
const int ind2m;
/* Source operand is an immediate. */
const int imm2r;
const int imm2pc;
const int imm2m;
/* Source operand is memory, using indexed (x(Rn)) or absolute (&ADDR)
addressing modes. */
const int mem2r;
const int mem2pc;
const int mem2m;
};
/* These structures describe the cost of MOV, BIT and CMP instructions, in terms
of clock cycles or words. */
static const struct double_op_cost cycle_cost_double_op_mov =
{
1, 3, 3,
2, 4, 4,
2, 3, 4,
3, 5, 5
};
/* Cycle count when memory is the destination operand is one larger than above
for instructions that aren't MOV, BIT or CMP. */
static const struct double_op_cost cycle_cost_double_op =
{
1, 3, 4,
2, 4, 5,
2, 3, 5,
3, 5, 6
};
static const struct double_op_cost size_cost_double_op =
{
1, 1, 2,
1, 1, 2,
2, 2, 3,
2, 2, 3
};
struct msp430_multlib_costs
{
const int mulhi;
const int mulsi;
const int muldi;
};
/* There is no precise size cost when using libcalls, instead it is disparaged
relative to other instructions.
The cycle costs are from the CALL to the RET, inclusive.
FIXME muldi cost is not accurate. */
static const struct msp430_multlib_costs cycle_cost_multlib_32bit =
{
27, 33, 66
};
/* 32bit multiply takes a few more instructions on 16bit hwmult. */
static const struct msp430_multlib_costs cycle_cost_multlib_16bit =
{
27, 42, 66
};
/* TARGET_REGISTER_MOVE_COST
There is only one class of general-purpose, non-fixed registers, and the
relative cost of moving data between them is always the same.
Therefore, the default of 2 is optimal. */
#undef TARGET_MEMORY_MOVE_COST
#define TARGET_MEMORY_MOVE_COST msp430_memory_move_cost
/* Return the cost of moving data between registers and memory.
The returned cost must be relative to the default TARGET_REGISTER_MOVE_COST
of 2.
IN is false if the value is to be written to memory. */
static int
msp430_memory_move_cost (machine_mode mode ATTRIBUTE_UNUSED,
reg_class_t rclass ATTRIBUTE_UNUSED,
bool in)
{
int cost;
const struct double_op_cost *cost_p;
/* Optimize with a code size focus by default, unless -O2 or above is
specified. */
bool speed = (!optimize_size && optimize >= 2);
cost_p = (speed ? &cycle_cost_double_op_mov : &size_cost_double_op);
if (in)
/* Reading from memory using indirect addressing is assumed to be the more
common case. */
cost = cost_p->ind2r;
else
cost = cost_p->r2m;
/* All register to register moves cost 1 cycle or 1 word, so multiply by 2
to get the costs relative to TARGET_REGISTER_MOVE_COST of 2. */
return 2 * cost;
}
/* For X, which must be a MEM RTX, return TRUE if it is an indirect memory
reference, @Rn or @Rn+. */
static bool
msp430_is_mem_indirect (rtx x)
{
gcc_assert (GET_CODE (x) == MEM);
rtx op0 = XEXP (x, 0);
return (GET_CODE (op0) == REG || GET_CODE (op0) == POST_INC);
}
/* Costs of MSP430 instructions are generally based on the addressing mode
combination of the source and destination operands.
Given source operand SRC (which may be NULL to indicate a single-operand
instruction) and destination operand DST return the cost of this
expression. */
static int
msp430_costs (rtx src, rtx dst, bool speed, rtx outer_rtx)
{
enum rtx_code src_code = GET_CODE (src);
enum rtx_code dst_code = GET_CODE (dst);
enum rtx_code outer_code = GET_CODE (outer_rtx);
machine_mode outer_mode = GET_MODE (outer_rtx);
const struct double_op_cost *cost_p;
cost_p = (speed ? &cycle_cost_double_op : &size_cost_double_op);
if (outer_code == TRUNCATE
&& (outer_mode == QImode
|| outer_mode == HImode
|| outer_mode == PSImode))
/* Truncation to these modes is normally free as a side effect of the
instructions themselves. */
return 0;
if (dst_code == SYMBOL_REF
|| dst_code == LABEL_REF
|| dst_code == CONST_INT)
/* Catch RTX like (minus (const_int 0) (reg)) but don't add any cost. */
return 0;
switch (src_code)
{
case REG:
return (dst_code == REG ? cost_p->r2r
: (dst_code == PC ? cost_p->r2pc : cost_p->r2m));
case CONST_INT:
case SYMBOL_REF:
case LABEL_REF:
case CONST:
return (dst_code == REG ? cost_p->imm2r
: (dst_code == PC ? cost_p->imm2pc : cost_p->imm2m));
case MEM:
if (msp430_is_mem_indirect (src))
return (dst_code == REG ? cost_p->ind2r : (dst_code == PC
? cost_p->ind2pc
: cost_p->ind2m));
else
return (dst_code == REG ? cost_p->mem2r : (dst_code == PC
? cost_p->mem2pc
: cost_p->mem2m));
default:
return cost_p->mem2m;
}
}
/* Given source operand SRC and destination operand DST from the shift or
rotate RTX OUTER_RTX, return the cost of performing that shift, assuming
optimization for speed when SPEED is true. */
static int
msp430_shift_costs (rtx src, rtx dst, bool speed, rtx outer_rtx)
{
int amt;
enum rtx_code src_code = GET_CODE (src);
enum rtx_code dst_code = GET_CODE (dst);
const struct single_op_cost *cost_p;
cost_p = (speed ? &cycle_cost_single_op : &size_cost_single_op);
if (src_code != CONST_INT)
/* The size or speed cost when the shift amount is unknown cannot be
accurately calculated, so just disparage it slightly. */
return 2 * msp430_costs (src, dst, speed, outer_rtx);
if (use_helper_for_const_shift (GET_MODE (outer_rtx), amt = INTVAL (src)))
{
/* GCC sometimes tries to perform shifts in some very inventive ways,
resulting in much larger code size usage than necessary, if
they are disparaged too much here. So in general, if
use_helper_for_const_shift thinks a helper should be used, obey
that and don't disparage the shift any more than a regular
instruction, even though the shift may actually cost more.
This ensures that the RTL generated at the initial expand pass has the
expected shift instructions, which can be mapped to the helper
functions. */
return msp430_costs (src, dst, speed, outer_rtx);
}
if (!msp430x)
{
/* Each shift by one place will be emitted individually. */
switch (dst_code)
{
case REG:
case CONST_INT:
return amt * cost_p->reg;
case MEM:
if (msp430_is_mem_indirect (dst))
return amt * cost_p->ind;
else
return amt * cost_p->mem;
default:
return amt * cost_p->mem;
}
}
/* RRAM, RRCM, RRUM, RLAM are used for shift counts <= 4, otherwise, the 'X'
versions are used.
Instructions which shift a MEM operand will never actually be output. It
will always be copied into a register to allow for efficient shifting. So
the cost just takes into account the cost of an additional copy in that
case. */
return (amt <= 4 ? (speed ? amt : 1) : (speed ? amt + 1 : 2)
+ (dst_code == REG ? 0
: msp430_costs (dst, gen_rtx_REG (HImode, 10), speed, outer_rtx)));
}
/* Given source operand SRC and destination operand DST from the MULT/DIV/MOD
RTX OUTER_RTX, return the cost of performing that operation, assuming
optimization for speed when SPEED is true. */
static int
msp430_muldiv_costs (rtx src, rtx dst, bool speed, rtx outer_rtx,
machine_mode outer_mode)
{
enum rtx_code outer_code = GET_CODE (outer_rtx);
const struct msp430_multlib_costs *cost_p;
cost_p = (msp430_use_16bit_hwmult ()
? &cycle_cost_multlib_32bit
: &cycle_cost_multlib_16bit);
int factor = 1;
/* Only used in some calculations. */
int mode_factor = 1;
if (outer_mode == SImode)
mode_factor = 2;
else if (outer_mode == PSImode)
/* PSImode multiplication is performed using SImode operands, so has extra
cost to factor in the conversions necessary before/after the
operation. */
mode_factor = 3;
else if (outer_mode == DImode)
mode_factor = 4;
if (!speed)
{
/* The codesize cost of using a helper function to perform the
multiplication or division cannot be accurately calculated, since the
cost depends on how many times the operation is performed in the
entire program. */
if (outer_code != MULT)
/* Division is always expensive. */
factor = 7;
else if (((msp430_use_16bit_hwmult () && outer_mode != DImode)
|| msp430_use_32bit_hwmult ()
|| msp430_use_f5_series_hwmult ()))
/* When the hardware multiplier is available, only disparage
slightly. */
factor = 2;
else
factor = 5;
return factor * mode_factor * msp430_costs (src, dst, speed, outer_rtx);
}
/* When there is hardware multiply support, there is a relatively low, fixed
cycle cost to performing any multiplication, but when there is no hardware
multiply support it is very costly. That precise cycle cost has not been
calculated here.
Division is extra slow since it always uses a software library.
The 16-bit hardware multiply library cannot be used to produce 64-bit
results. */
if (outer_code != MULT || !msp430_has_hwmult ()
|| (outer_mode == DImode && msp430_use_16bit_hwmult ()))
{
factor = (outer_code == MULT ? 50 : 70);
return factor * mode_factor * msp430_costs (src, dst, speed, outer_rtx);
}
switch (outer_mode)
{
case E_QImode:
case E_HImode:
/* Include the cost of copying the operands into and out of the hardware
multiply routine. */
return cost_p->mulhi + (3 * msp430_costs (src, dst, speed, outer_rtx));
case E_PSImode:
/* Extra factor for the conversions necessary to do PSI->SI before the
operation. */
factor = 2;
/* fallthru. */
case E_SImode:
return factor * (cost_p->mulsi
+ (6 * msp430_costs (src, dst, speed, outer_rtx)));
case E_DImode:
default:
return cost_p->muldi + (12 * msp430_costs (src, dst, speed, outer_rtx));
}
}
/* Recurse within X to find the actual destination operand of the expression.
For example:
(plus (ashift (minus (ashift (reg)
(const_int) ......
should return the reg RTX. */
static rtx
msp430_get_inner_dest_code (rtx x)
{
enum rtx_code code = GET_CODE (x);
rtx op0 = XEXP (x, 0);
switch (code)
{
case REG:
case SYMBOL_REF:
case CONST_INT:
case CONST:
case LABEL_REF:
return x;
case MEM:
/* Return the MEM expr not the inner REG for these cases. */
switch (GET_CODE (op0))
{
case REG:
case SYMBOL_REF:
case LABEL_REF:
case CONST:
case POST_INC:
return x;
case PLUS:
/* return MEM (PLUS (REG) (CONST)) */
if (GET_CODE (XEXP (op0, 0)) == REG)
{
if (GET_CODE (XEXP (op0, 1)) == CONST_INT
|| GET_CODE (XEXP (op0, 1)) == CONST
|| GET_CODE (XEXP (op0, 1)) == LABEL_REF
|| GET_CODE (XEXP (op0, 1)) == SYMBOL_REF)
return x;
else
return msp430_get_inner_dest_code (op0);
}
return msp430_get_inner_dest_code (op0);
default:
if (GET_RTX_FORMAT (code)[0] != 'e')
return x;
return msp430_get_inner_dest_code (op0);
}
break;
default:
if (op0 == NULL_RTX)
gcc_unreachable ();
else
{
if (GET_RTX_FORMAT (code)[0] != 'e'
&& code != ENTRY_VALUE)
return x;
return msp430_get_inner_dest_code (op0);
}
}
}
/* Calculate the cost of an MSP430 single-operand instruction, for operand DST
within the RTX OUTER_RTX, optimizing for speed if SPEED is true. */
static int
msp430_single_op_cost (rtx dst, bool speed, rtx outer_rtx)
{
enum rtx_code dst_code = GET_CODE (dst);
const struct single_op_cost *cost_p;
const struct double_op_cost *double_op_cost_p;
cost_p = (speed ? &cycle_cost_single_op : &size_cost_single_op);
double_op_cost_p = (speed ? &cycle_cost_double_op : &size_cost_double_op);
switch (dst_code)
{
case REG:
return cost_p->reg;
case MEM:
if (msp430_is_mem_indirect (dst))
return cost_p->ind;
else
return cost_p->mem;
case CONST_INT:
case CONST_FIXED:
case CONST_DOUBLE:
case SYMBOL_REF:
case CONST:
/* A constant value would need to be copied into a register first. */
return double_op_cost_p->imm2r + cost_p->reg;
default:
return cost_p->mem;
}
}
#undef TARGET_RTX_COSTS
#define TARGET_RTX_COSTS msp430_rtx_costs
/* This target hook describes the relative costs of RTL expressions.
The function recurses to just before the lowest level of the expression,
when both of the operands of the expression can be examined at the same time.
This is because the cost of the expression depends on the specific
addressing mode combination of the operands.
The hook returns true when all subexpressions of X have been processed, and
false when rtx_cost should recurse. */
static bool
msp430_rtx_costs (rtx x,
machine_mode mode,
int outer_code ATTRIBUTE_UNUSED,
int opno ATTRIBUTE_UNUSED,
int * total,
bool speed)
{
enum rtx_code code = GET_CODE (x);
rtx dst, src;
rtx dst_inner, src_inner;
*total = 0;
dst = XEXP (x, 0);
if (GET_RTX_LENGTH (code) == 1)
/* Some RTX that are single-op in GCC are double-op when translated to
MSP430 instructions e.g NOT, NEG, ZERO_EXTEND. */
src = dst;
else
src = XEXP (x, 1);
switch (code)
{
case SET:
/* Ignoring SET improves codesize. */
if (!speed)
return true;
/* fallthru. */
case PLUS:
if (outer_code == MEM)
/* Do not add any cost for the plus itself, but recurse in case there
are more complicated RTX inside. */
return false;
/* fallthru. */
case MINUS:
case AND:
case IOR:
case XOR:
case NOT:
case ZERO_EXTEND:
case TRUNCATE:
case NEG:
case ZERO_EXTRACT:
case SIGN_EXTRACT:
case IF_THEN_ELSE:
dst_inner = msp430_get_inner_dest_code (dst);
src_inner = msp430_get_inner_dest_code (src);
*total = COSTS_N_INSNS (msp430_costs (src_inner, dst_inner, speed, x));
if (mode == SImode)
*total *= 2;
if (mode == DImode)
*total *= 4;
return false;
case ROTATE:
case ASHIFT:
case ASHIFTRT:
case LSHIFTRT:
dst_inner = msp430_get_inner_dest_code (dst);
src_inner = msp430_get_inner_dest_code (src);
*total = COSTS_N_INSNS (msp430_shift_costs (src_inner, dst_inner,
speed, x));
if (mode == SImode)
*total *= 2;
if (mode == DImode)
*total *= 4;
return false;
case MULT:
case DIV:
case MOD:
case UDIV:
case UMOD:
dst_inner = msp430_get_inner_dest_code (dst);
src_inner = msp430_get_inner_dest_code (src);
*total = COSTS_N_INSNS (msp430_muldiv_costs (src_inner, dst_inner, speed,
x, mode));
return false;
case CALL:
case SIGN_EXTEND:
dst_inner = msp430_get_inner_dest_code (dst);
*total = COSTS_N_INSNS (msp430_single_op_cost (dst_inner, speed, x));
if (mode == SImode)
*total *= 2;
if (mode == DImode)
*total *= 4;
return false;
case CONST_INT:
case CONST_FIXED:
case CONST_DOUBLE:
case SYMBOL_REF:
case CONST:
case LABEL_REF:
case REG:
case PC:
case POST_INC:
if (mode == SImode)
*total = COSTS_N_INSNS (2);
else if (mode == DImode)
*total = COSTS_N_INSNS (4);
return true;
case MEM:
/* PSImode operands are expensive when in memory. */
if (mode == PSImode)
*total = COSTS_N_INSNS (1);
else if (mode == SImode)
*total = COSTS_N_INSNS (2);
else if (mode == DImode)
*total = COSTS_N_INSNS (4);
/* Recurse into the MEM. */
return false;
case EQ:
case NE:
case GT:
case GTU:
case GE:
case GEU:
case LT:
case LTU:
case LE:
case LEU:
/* Conditions are mostly equivalent, changing their relative
costs has no effect. */
return false;
case ASM_OPERANDS:
case ASM_INPUT:
case CLOBBER:
case COMPARE:
case CONCAT:
case ENTRY_VALUE:
/* Other unhandled expressions. */
return false;
default:
return false;
}
}
#undef TARGET_INSN_COST
#define TARGET_INSN_COST msp430_insn_cost
static int
msp430_insn_cost (rtx_insn *insn, bool speed ATTRIBUTE_UNUSED)
{
if (recog_memoized (insn) < 0)
return 0;
/* The returned cost must be relative to COSTS_N_INSNS (1). An insn with a
length of 2 bytes is the smallest possible size and so must be equivalent
to COSTS_N_INSNS (1). */
return COSTS_N_INSNS (get_attr_length (insn) / 2);
/* FIXME Add more detailed costs when optimizing for speed.
For now the length of the instruction is a good approximiation and roughly
correlates with cycle cost. */
}
/* Function Entry and Exit */
/* The MSP430 call frame looks like this:
<higher addresses>
+--------------------+
| |
| Stack Arguments |
| |
+--------------------+ <-- "arg pointer"
| |
| PC from call | (2 bytes for 430, 4 for TARGET_LARGE)
| |
+--------------------+
| SR if this func has|
| been called via an |
| interrupt. |
+--------------------+ <-- SP before prologue, also AP
| |
| Saved Regs | (2 bytes per reg for 430, 4 per for TARGET_LARGE)
| |
+--------------------+ <-- "frame pointer"
| |
| Locals |
| |
+--------------------+
| |
| Outgoing Args |
| |
+--------------------+ <-- SP during function
<lower addresses>
*/
/* We use this to wrap all emitted insns in the prologue, so they get
the "frame-related" (/f) flag set. */
static rtx
F (rtx x)
{
RTX_FRAME_RELATED_P (x) = 1;
return x;
}
/* This is the one spot that decides if a register is to be saved and
restored in the prologue/epilogue. */
static bool
msp430_preserve_reg_p (int regno)
{
/* PC, SP, SR, and the constant generator. */
if (regno <= 3)
return false;
/* FIXME: add interrupt, EH, etc. */
if (crtl->calls_eh_return)
return true;
/* Shouldn't be more than the above, but just in case... */
if (fixed_regs[regno])
return false;
/* For interrupt functions we must save and restore the used regs that
would normally be caller-saved (R11->R15). */
if (msp430_is_interrupt_func () && regno >= 11 && regno <= 15)
{
if (crtl->is_leaf && df_regs_ever_live_p (regno))
/* If the interrupt func is a leaf then we only need to restore the
caller-saved regs that are used. */
return true;
else if (!crtl->is_leaf)
/* If the interrupt function is not a leaf we must save all
caller-saved regs in case the callee modifies them. */
return true;
}
if (!call_used_or_fixed_reg_p (regno)
&& df_regs_ever_live_p (regno))
return true;
return false;
}
/* Compute all the frame-related fields in our machine_function
structure. */
static void
msp430_compute_frame_info (void)
{
int i;
cfun->machine->computed = 1;
cfun->machine->framesize_regs = 0;
cfun->machine->framesize_locals = get_frame_size ();
cfun->machine->framesize_outgoing = crtl->outgoing_args_size;
for (i = 0; i < ARG_POINTER_REGNUM; i ++)
if (msp430_preserve_reg_p (i))
{
cfun->machine->need_to_save[i] = 1;
cfun->machine->framesize_regs += (TARGET_LARGE ? 4 : 2);
}
else
cfun->machine->need_to_save[i] = 0;
if ((cfun->machine->framesize_locals + cfun->machine->framesize_outgoing) & 1)
cfun->machine->framesize_locals ++;
cfun->machine->framesize = (cfun->machine->framesize_regs
+ cfun->machine->framesize_locals
+ cfun->machine->framesize_outgoing);
}
/* Attribute Handling. */
const char * const ATTR_INTR = "interrupt";
const char * const ATTR_WAKEUP = "wakeup";
const char * const ATTR_NAKED = "naked";
const char * const ATTR_REENT = "reentrant";
const char * const ATTR_CRIT = "critical";
const char * const ATTR_LOWER = "lower";
const char * const ATTR_UPPER = "upper";
const char * const ATTR_EITHER = "either";
const char * const ATTR_NOINIT = "noinit";
const char * const ATTR_PERSIST = "persistent";
static inline bool
has_attr (const char * attr, tree decl)
{
if (decl == NULL_TREE)
return false;
return lookup_attribute (attr, DECL_ATTRIBUTES (decl)) != NULL_TREE;
}
static bool
is_interrupt_func (tree decl = current_function_decl)
{
return has_attr (ATTR_INTR, decl);
}
/* Returns true if the current function has the "interrupt" attribute. */
bool
msp430_is_interrupt_func (void)
{
return is_interrupt_func (current_function_decl);
}
static bool
is_wakeup_func (tree decl = current_function_decl)
{
return is_interrupt_func (decl) && has_attr (ATTR_WAKEUP, decl);
}
static inline bool
is_naked_func (tree decl = current_function_decl)
{
return has_attr (ATTR_NAKED, decl);
}
static inline bool
is_reentrant_func (tree decl = current_function_decl)
{
return has_attr (ATTR_REENT, decl);
}
static inline bool
is_critical_func (tree decl = current_function_decl)
{
return has_attr (ATTR_CRIT, decl);
}
static bool
has_section_name (const char * name, tree decl = current_function_decl)
{
if (decl == NULL_TREE)
return false;
return (DECL_SECTION_NAME (decl)
&& (strcmp (name, DECL_SECTION_NAME (decl)) == 0));
}
#undef TARGET_ALLOCATE_STACK_SLOTS_FOR_ARGS
#define TARGET_ALLOCATE_STACK_SLOTS_FOR_ARGS \
msp430_allocate_stack_slots_for_args
static bool
msp430_allocate_stack_slots_for_args (void)
{
/* Naked functions should not allocate stack slots for arguments. */
return ! is_naked_func ();
}
#undef TARGET_WARN_FUNC_RETURN
#define TARGET_WARN_FUNC_RETURN msp430_warn_func_return
static bool
msp430_warn_func_return (tree decl)
{
/* Naked functions are implemented entirely in assembly, including the
return sequence, so suppress warnings about this. */
return !is_naked_func (decl);
}
/* Verify MSP430 specific attributes. */
#define TREE_NAME_EQ(NAME, STR) (strcmp (IDENTIFIER_POINTER (NAME), (STR)) == 0)
static tree
msp430_attr (tree * node,
tree name,
tree args,
int flags ATTRIBUTE_UNUSED,
bool * no_add_attrs)
{
gcc_assert (DECL_P (* node));
/* Only the interrupt attribute takes an argument. */
if (args != NULL)
{
tree value = TREE_VALUE (args);
switch (TREE_CODE (value))
{
case STRING_CST:
if ( strcmp (TREE_STRING_POINTER (value), "reset")
&& strcmp (TREE_STRING_POINTER (value), "nmi")
&& strcmp (TREE_STRING_POINTER (value), "watchdog"))
/* Allow the attribute to be added - the linker script
being used may still recognise this name. */
warning (OPT_Wattributes,
"unrecognized interrupt vector argument of %qE attribute",
name);
break;
case INTEGER_CST:
if (wi::gtu_p (wi::to_wide (value), 63))
/* Allow the attribute to be added - the linker script
being used may still recognise this value. */
warning (OPT_Wattributes,
"numeric argument of %qE attribute must be in range 0..63",
name);
break;
default:
warning (OPT_Wattributes,
"argument of %qE attribute is not a string constant "
"or number", name);
*no_add_attrs = true;
break;
}
}
const char * message = NULL;
if (TREE_CODE (* node) != FUNCTION_DECL)
{
message = "%qE attribute only applies to functions";
}
else if (TREE_NAME_EQ (name, ATTR_INTR))
{
if (TREE_CODE (TREE_TYPE (* node)) == FUNCTION_TYPE
&& ! VOID_TYPE_P (TREE_TYPE (TREE_TYPE (* node))))
message = "interrupt handlers must be void";
else
{
/* Ensure interrupt handlers never get optimised out. */
TREE_USED (* node) = 1;
DECL_PRESERVE_P (* node) = 1;
}
if (is_critical_func (* node))
{
/* We always ignore the critical attribute when interrupt and
critical are used together. */
warning (OPT_Wattributes,
"critical attribute has no effect on interrupt functions");
DECL_ATTRIBUTES (*node) = remove_attribute (ATTR_CRIT,
DECL_ATTRIBUTES (* node));
}
}
else if (TREE_NAME_EQ (name, ATTR_CRIT))
{
if (is_interrupt_func ( *node))
message = "critical attribute has no effect on interrupt functions";
}
if (message)
{
warning (OPT_Wattributes, message, name);
* no_add_attrs = true;
}
return NULL_TREE;
}
static tree
msp430_section_attr (tree * node,
tree name,
tree args,
int flags ATTRIBUTE_UNUSED,
bool * no_add_attrs ATTRIBUTE_UNUSED)
{
gcc_assert (DECL_P (* node));
gcc_assert (args == NULL);
const char * message = NULL;
/* The "noinit", "persistent", and "section" attributes are handled
generically, so we cannot set up additional target-specific attribute
exclusions using the existing mechanism. */
if (has_attr (ATTR_NOINIT, *node) && !TREE_NAME_EQ (name, "lower"))
message = G_("ignoring attribute %qE because it conflicts with "
"attribute %<noinit%>");
else if (has_attr ("section", *node) && !TREE_NAME_EQ (name, "lower"))
message = G_("ignoring attribute %qE because it conflicts with "
"attribute %<section%>");
else if (has_attr (ATTR_PERSIST, *node) && !TREE_NAME_EQ (name, "lower"))
message = G_("ignoring attribute %qE because it conflicts with "
"attribute %<persistent%>");
/* It does not make sense to use upper/lower/either attributes without
-mlarge.
Without -mlarge, "lower" is the default and only region, so is redundant.
Without -mlarge, "upper" will (and "either" might) place code/data in the
upper region, which for data could result in relocation overflows, and for
code could result in stack mismanagement and incorrect call/return
instructions. */
else if (!TARGET_LARGE)
message = G_("%qE attribute ignored. Large memory model (%<-mlarge%>) "
"is required.");
if (message)
{
warning (OPT_Wattributes, message, name);
* no_add_attrs = true;
}
return NULL_TREE;
}
/* Helper to define attribute exclusions. */
#define ATTR_EXCL(name, function, type, variable) \
{ name, function, type, variable }
/* "reentrant", "critical" and "naked" functions must conflict because
they all modify the prologue or epilogue of functions in mutually exclusive
ways. */
static const struct attribute_spec::exclusions attr_reent_exclusions[] =
{
ATTR_EXCL (ATTR_NAKED, true, true, true),
ATTR_EXCL (ATTR_CRIT, true, true, true),
ATTR_EXCL (NULL, false, false, false)
};
static const struct attribute_spec::exclusions attr_naked_exclusions[] =
{
ATTR_EXCL (ATTR_REENT, true, true, true),
ATTR_EXCL (ATTR_CRIT, true, true, true),
ATTR_EXCL (NULL, false, false, false)
};
static const struct attribute_spec::exclusions attr_crit_exclusions[] =
{
ATTR_EXCL (ATTR_REENT, true, true, true),
ATTR_EXCL (ATTR_NAKED, true, true, true),
ATTR_EXCL (NULL, false, false, false)
};
/* Attributes which put the given object in a specific section must conflict
with one another. */
static const struct attribute_spec::exclusions attr_lower_exclusions[] =
{
ATTR_EXCL (ATTR_UPPER, true, true, true),
ATTR_EXCL (ATTR_EITHER, true, true, true),
ATTR_EXCL (NULL, false, false, false)
};
static const struct attribute_spec::exclusions attr_upper_exclusions[] =
{
ATTR_EXCL (ATTR_LOWER, true, true, true),
ATTR_EXCL (ATTR_EITHER, true, true, true),
ATTR_EXCL (NULL, false, false, false)
};
static const struct attribute_spec::exclusions attr_either_exclusions[] =
{
ATTR_EXCL (ATTR_LOWER, true, true, true),
ATTR_EXCL (ATTR_UPPER, true, true, true),
ATTR_EXCL (NULL, false, false, false)
};
#undef TARGET_ATTRIBUTE_TABLE
#define TARGET_ATTRIBUTE_TABLE msp430_attribute_table
/* Table of MSP430-specific attributes. */
const struct attribute_spec msp430_attribute_table[] =
{
/* { name, min_num_args, max_num_args, decl_req, type_req, fn_type_req,
affects_type_identity, handler, exclude } */
{ ATTR_INTR, 0, 1, true, false, false, false, msp430_attr, NULL },
{ ATTR_NAKED, 0, 0, true, false, false, false, msp430_attr,
attr_naked_exclusions },
{ ATTR_REENT, 0, 0, true, false, false, false, msp430_attr,
attr_reent_exclusions },
{ ATTR_CRIT, 0, 0, true, false, false, false, msp430_attr,
attr_crit_exclusions },
{ ATTR_WAKEUP, 0, 0, true, false, false, false, msp430_attr, NULL },
{ ATTR_LOWER, 0, 0, true, false, false, false, msp430_section_attr,
attr_lower_exclusions },
{ ATTR_UPPER, 0, 0, true, false, false, false, msp430_section_attr,
attr_upper_exclusions },
{ ATTR_EITHER, 0, 0, true, false, false, false, msp430_section_attr,
attr_either_exclusions },
{ NULL, 0, 0, false, false, false, false, NULL, NULL }
};
#undef TARGET_HANDLE_GENERIC_ATTRIBUTE
#define TARGET_HANDLE_GENERIC_ATTRIBUTE msp430_handle_generic_attribute
tree
msp430_handle_generic_attribute (tree *node,
tree name,
tree args ATTRIBUTE_UNUSED,
int flags ATTRIBUTE_UNUSED,
bool *no_add_attrs)
{
const char *message = NULL;
/* Permit the "lower" attribute to be set on variables with the "section",
"noinit" and "persistent" attributes. This is used to indicate that the
corresponding output section will be in lower memory, so a 430X
instruction is not required to handle it. */
if (has_attr (ATTR_LOWER, *node)
&& !(TREE_NAME_EQ (name, "section") || TREE_NAME_EQ (name, ATTR_PERSIST)
|| TREE_NAME_EQ (name, ATTR_NOINIT)))
message = G_("ignoring attribute %qE because it conflicts with "
"attribute %<lower%>");
else if (has_attr (ATTR_UPPER, *node))
message = G_("ignoring attribute %qE because it conflicts with "
"attribute %<upper%>");
else if (has_attr (ATTR_EITHER, *node))
message = G_("ignoring attribute %qE because it conflicts with "
"attribute %<either%>");
if (message)
{
warning (OPT_Wattributes, message, name);
*no_add_attrs = true;
}
return NULL_TREE;
}
/* Given a non-automatic VAR_DECL which can possibly have a section, return
true if the variable will definitely be placed in the lower memory
region (below address 0x10000). */
static bool
msp430_var_in_low_mem (tree decl)
{
gcc_assert (VAR_P (decl));
/* "noinit" variables are always placed in the lower memory region. */
if (has_attr (ATTR_UPPER, decl)
|| has_attr (ATTR_EITHER, decl)
|| has_attr (ATTR_PERSIST, decl)
/* Unless the variable is marked with the lower or noinit attribute, we
cannot assume that it is in the lower region if it is marked with the
section attribute or -mdata-region={upper,either,none} have been
passed.
The noinit and section attributes conflict. */
|| (!has_attr (ATTR_LOWER, decl) && !has_attr (ATTR_NOINIT, decl)
&& (has_attr ("section", decl)
|| msp430_data_region == MSP430_REGION_UPPER
|| msp430_data_region == MSP430_REGION_EITHER
|| msp430_data_region == MSP430_REGION_ANY)))
return false;
return true;
}
#undef TARGET_ENCODE_SECTION_INFO
#define TARGET_ENCODE_SECTION_INFO msp430_encode_section_info
/* Encode whether a SYMBOL_REF is definitely in the lower memory region. */
static void
msp430_encode_section_info (tree decl, rtx rtl, int first)
{
rtx symbol;
default_encode_section_info (decl, rtl, first);
/* Careful not to prod global register variables. */
if (!MEM_P (rtl))
return;
symbol = XEXP (rtl, 0);
if (GET_CODE (symbol) != SYMBOL_REF)
return;
if (VAR_P (decl)
&& (TREE_STATIC (decl) || DECL_EXTERNAL (decl))
&& msp430_var_in_low_mem (decl))
SYMBOL_REF_FLAGS (symbol) = SYMBOL_FLAG_LOW_MEM;
}
#undef TARGET_ASM_FUNCTION_PROLOGUE
#define TARGET_ASM_FUNCTION_PROLOGUE msp430_start_function
static void
msp430_start_function (FILE *outfile)
{
int r, n;
fprintf (outfile, "; start of function\n");
if (DECL_ATTRIBUTES (current_function_decl) != NULL_TREE)
{
fprintf (outfile, "; attributes: ");
if (is_naked_func ())
fprintf (outfile, "naked ");
if (msp430_is_interrupt_func ())
fprintf (outfile, "interrupt ");
if (is_reentrant_func ())
fprintf (outfile, "reentrant ");
if (is_critical_func ())
fprintf (outfile, "critical ");
if (is_wakeup_func ())
fprintf (outfile, "wakeup ");
fprintf (outfile, "\n");
}
fprintf (outfile, "; framesize_regs: %d\n",
cfun->machine->framesize_regs);
fprintf (outfile, "; framesize_locals: %d\n",
cfun->machine->framesize_locals);
fprintf (outfile, "; framesize_outgoing: %d\n",
cfun->machine->framesize_outgoing);
fprintf (outfile, "; framesize: %d\n", cfun->machine->framesize);
fprintf (outfile, "; elim ap -> fp %d\n",
msp430_initial_elimination_offset (ARG_POINTER_REGNUM,
FRAME_POINTER_REGNUM));
fprintf (outfile, "; elim fp -> sp %d\n",
msp430_initial_elimination_offset (FRAME_POINTER_REGNUM,
STACK_POINTER_REGNUM));
n = 0;
fprintf (outfile, "; saved regs:");
for (r = 0; r < ARG_POINTER_REGNUM; r++)
if (cfun->machine->need_to_save[r])
{
fprintf (outfile, " %s", reg_names[r]);
n = 1;
}
if (n == 0)
fprintf (outfile, "(none)");
fprintf (outfile, "\n");
}
/* Common code to change the stack pointer. */
static void
increment_stack (HOST_WIDE_INT amount)
{
rtx inc;
rtx sp = stack_pointer_rtx;
if (amount == 0)
return;
if (amount < 0)
{
inc = GEN_INT (- amount);
if (TARGET_LARGE)
F (emit_insn (gen_subpsi3 (sp, sp, inc)));
else
F (emit_insn (gen_subhi3 (sp, sp, inc)));
}
else
{
inc = GEN_INT (amount);
if (TARGET_LARGE)
F (emit_insn (gen_addpsi3 (sp, sp, inc)));
else
F (emit_insn (gen_addhi3 (sp, sp, inc)));
}
}
void
msp430_start_function (FILE *file, const char *name, tree decl)
{
tree int_attr;
int_attr = lookup_attribute ("interrupt", DECL_ATTRIBUTES (decl));
if (int_attr != NULL_TREE)
{
tree intr_vector = TREE_VALUE (int_attr);
if (intr_vector != NULL_TREE)
{
char buf[101];
/* Interrupt vector sections should be unique, but use of weak
functions implies multiple definitions. */
if (DECL_WEAK (decl))
{
error ("argument to interrupt attribute is unsupported for weak "
"functions");
}
intr_vector = TREE_VALUE (intr_vector);
/* The interrupt attribute has a vector value. Turn this into a
section name, switch to that section and put the address of
the current function into that vector slot. Note msp430_attr()
has already verified the vector name for us. */
if (TREE_CODE (intr_vector) == STRING_CST)
sprintf (buf, "__interrupt_vector_%.80s",
TREE_STRING_POINTER (intr_vector));
else /* TREE_CODE (intr_vector) == INTEGER_CST */
sprintf (buf, "__interrupt_vector_%u",
(unsigned int) TREE_INT_CST_LOW (intr_vector));
switch_to_section (get_section (buf, SECTION_CODE, decl));
fputs ("\t.word\t", file);
assemble_name (file, name);
fputc ('\n', file);
fputc ('\t', file);
}
}
switch_to_section (function_section (decl));
ASM_OUTPUT_TYPE_DIRECTIVE (file, name, "function");
ASM_OUTPUT_FUNCTION_LABEL (file, name, decl);
}
static const char * const lower_prefix = ".lower";
static const char * const upper_prefix = ".upper";
static const char * const either_prefix = ".either";
/* Generate a prefix for a section name, based upon
the region into which the object should be placed. */
static const char *
gen_prefix (tree decl)
{
if (DECL_ONE_ONLY (decl))
return NULL;
/* If the user has specified a particular section then do not use any
prefix. */
if (has_attr ("section", decl))
return NULL;
/* If the function has been put in the .lowtext section (because it is an
interrupt handler, and the large memory model is used), then do not add
any prefixes. */
if (has_section_name (".lowtext", decl))
return NULL;
/* Memory regions require the large memory model. */
if (!TARGET_LARGE)
return NULL;
/* Note that we always apply the lower prefix when the attribute has been
used. But we only apply the lower prefix when the lower region has been
specified by a command line option if -muse-lower-region-prefix has also
been passed. */
if (has_attr (ATTR_LOWER, decl))
return lower_prefix;
if (has_attr (ATTR_UPPER, decl))
return upper_prefix;
if (has_attr (ATTR_EITHER, decl))
return either_prefix;
if (TREE_CODE (decl) == FUNCTION_DECL)
{
if ((msp430_code_region == MSP430_REGION_LOWER)
&& TARGET_USE_LOWER_REGION_PREFIX)
return lower_prefix;
if (msp430_code_region == MSP430_REGION_UPPER)
return upper_prefix;
if (msp430_code_region == MSP430_REGION_EITHER)
return either_prefix;
}
else
{
if ((msp430_data_region == MSP430_REGION_LOWER)
&& TARGET_USE_LOWER_REGION_PREFIX)
return lower_prefix;
if (msp430_data_region == MSP430_REGION_UPPER)
return upper_prefix;
if (msp430_data_region == MSP430_REGION_EITHER)
return either_prefix;
}
return NULL;
}
#undef TARGET_ASM_SELECT_SECTION
#define TARGET_ASM_SELECT_SECTION msp430_select_section
static section *
msp430_select_section (tree decl, int reloc, unsigned HOST_WIDE_INT align)
{
const char *prefix;
const char *sec_name;
const char *base_sec_name;
gcc_assert (decl != NULL_TREE);
if (TREE_CODE (decl) == STRING_CST
|| TREE_CODE (decl) == CONSTRUCTOR
|| TREE_CODE (decl) == INTEGER_CST
|| TREE_CODE (decl) == VECTOR_CST
|| TREE_CODE (decl) == COMPLEX_CST)
return default_select_section (decl, reloc, align);
/* In large mode we must make sure that interrupt handlers are put into
low memory as the vector table only accepts 16-bit addresses. */
if (TARGET_LARGE && TREE_CODE (decl) == FUNCTION_DECL
&& is_interrupt_func (decl))
return get_section (".lowtext", SECTION_CODE | SECTION_WRITE , decl);
/* The "noinit" and "persistent" attributes are handled generically. */
if (has_attr (ATTR_NOINIT, decl) || has_attr (ATTR_PERSIST, decl))
return default_elf_select_section (decl, reloc, align);
prefix = gen_prefix (decl);
switch (categorize_decl_for_section (decl, reloc))
{
case SECCAT_TEXT:
if (!prefix)
return text_section;
base_sec_name = ".text";
break;
case SECCAT_DATA:
if (!prefix)
return data_section;
base_sec_name = ".data";
break;
case SECCAT_BSS:
if (!prefix)
return bss_section;
base_sec_name = ".bss";
break;
case SECCAT_RODATA:
if (!prefix)
return readonly_data_section;
base_sec_name = ".rodata";
break;
/* Enable merging of constant data by the GNU linker using
default_elf_select_section and therefore enabling creation of
sections with the SHF_MERGE flag. */
case SECCAT_RODATA_MERGE_STR:
case SECCAT_RODATA_MERGE_STR_INIT:
case SECCAT_RODATA_MERGE_CONST:
return default_elf_select_section (decl, reloc, align);
/* The sections listed below are not supported for MSP430.
They should not be generated, but in case they are, we use
default_select_section so they get placed in sections
the msp430 assembler and linker understand. */
/* "small data" sections are not supported. */
case SECCAT_SRODATA:
case SECCAT_SDATA:
case SECCAT_SBSS:
/* Thread-local storage (TLS) is not supported. */
case SECCAT_TDATA:
case SECCAT_TBSS:
/* Sections used by a dynamic linker are not supported. */
case SECCAT_DATA_REL:
case SECCAT_DATA_REL_LOCAL:
case SECCAT_DATA_REL_RO:
case SECCAT_DATA_REL_RO_LOCAL:
return default_select_section (decl, reloc, align);
default:
gcc_unreachable ();
}
sec_name = ACONCAT ((prefix, base_sec_name, DECL_SECTION_NAME (decl), NULL));
return get_named_section (decl, sec_name, 0);
}
#undef TARGET_ASM_FUNCTION_SECTION
#define TARGET_ASM_FUNCTION_SECTION msp430_function_section
static section *
msp430_function_section (tree decl, enum node_frequency freq, bool startup,
bool exit)
{
const char * name;
gcc_assert (DECL_SECTION_NAME (decl) != NULL);
name = DECL_SECTION_NAME (decl);
const char * prefix = gen_prefix (decl);
if (prefix == NULL
|| startswith (name, prefix))
return default_function_section (decl, freq, startup, exit);
name = ACONCAT ((prefix, name, NULL));
return get_named_section (decl, name, 0);
}
#undef TARGET_SECTION_TYPE_FLAGS
#define TARGET_SECTION_TYPE_FLAGS msp430_section_type_flags
unsigned int
msp430_section_type_flags (tree decl, const char * name, int reloc)
{
if (startswith (name, lower_prefix))
name += strlen (lower_prefix);
else if (startswith (name, upper_prefix))
name += strlen (upper_prefix);
else if (startswith (name, either_prefix))
name += strlen (either_prefix);
return default_section_type_flags (decl, name, reloc);
}
#undef TARGET_ASM_UNIQUE_SECTION
#define TARGET_ASM_UNIQUE_SECTION msp430_unique_section
static void
msp430_unique_section (tree decl, int reloc)
{
gcc_assert (decl != NULL_TREE);
/* In large mode we must make sure that interrupt handlers are put into
low memory as the vector table only accepts 16-bit addresses. */
if (TARGET_LARGE && TREE_CODE (decl) == FUNCTION_DECL
&& is_interrupt_func (decl))
{
set_decl_section_name (decl, ".lowtext");
return;
}
default_unique_section (decl, reloc);
const char * prefix;
if ( TREE_CODE (decl) == STRING_CST
|| TREE_CODE (decl) == CONSTRUCTOR
|| TREE_CODE (decl) == INTEGER_CST
|| TREE_CODE (decl) == VECTOR_CST
|| TREE_CODE (decl) == COMPLEX_CST
|| (prefix = gen_prefix (decl)) == NULL)
return;
const char * dec_name = DECL_SECTION_NAME (decl);
char * name = ACONCAT ((prefix, dec_name, NULL));
set_decl_section_name (decl, name);
}
/* Emit a declaration of a common symbol.
If a data region is in use then put the symbol into the
equivalent .bss section instead.
If LOCAL is 1, then DECL is for a local common variable. */
void
msp430_output_aligned_decl_common (FILE * stream,
const tree decl,
const char * name,
unsigned HOST_WIDE_INT size,
unsigned int align,
int local)
{
/* Only emit a common symbol if the variable does not have a specific section
assigned. */
if ((msp430_data_region == MSP430_REGION_ANY
|| ((msp430_data_region == MSP430_REGION_LOWER)
&& !TARGET_USE_LOWER_REGION_PREFIX))
&& !(decl != NULL_TREE && DECL_SECTION_NAME (decl))
&& !has_attr (ATTR_EITHER, decl)
&& !has_attr (ATTR_LOWER, decl)
&& !has_attr (ATTR_UPPER, decl)
&& !has_attr (ATTR_PERSIST, decl)
&& !has_attr (ATTR_NOINIT, decl))
{
if (local)
{
fprintf (stream, LOCAL_ASM_OP);
assemble_name (stream, name);
fprintf (stream, "\n");
}
fprintf (stream, COMMON_ASM_OP);
assemble_name (stream, name);
fprintf (stream, "," HOST_WIDE_INT_PRINT_UNSIGNED",%u\n",
size, align / BITS_PER_UNIT);
}
else
{
section * sec;
if (decl)
sec = msp430_select_section (decl, 0, align);
else
switch (msp430_data_region)
{
case MSP430_REGION_UPPER:
sec = get_named_section (NULL, ".upper.bss", 0);
break;
case MSP430_REGION_LOWER:
sec = get_named_section (NULL, ".lower.bss", 0);
break;
case MSP430_REGION_EITHER:
sec = get_named_section (NULL, ".either.bss", 0);
break;
default:
gcc_unreachable ();
}
gcc_assert (sec != NULL);
switch_to_section (sec);
ASM_OUTPUT_ALIGN (stream, floor_log2 (align / BITS_PER_UNIT));
if (!local)
{
targetm.asm_out.globalize_label (stream, name);
ASM_WEAKEN_LABEL (stream, name);
}
ASM_OUTPUT_LABEL (stream, name);
ASM_OUTPUT_SKIP (stream, size ? size : 1);
}
}
#undef TARGET_ASM_FILE_END
#define TARGET_ASM_FILE_END msp430_file_end
/* Emit MSPABI and GNU object attributes.
Tags and values for MSPABI attributes are:
OFBA_MSPABI_Tag_ISA 4
MSP430 1
MSP430X 2
OFBA_MSPABI_Tag_Code_Model 6
Small 1
Large 2
OFBA_MSPABI_Tag_Data_Model 8
Small 1
Large 2
Restricted 3 (Unused by GNU)
OFBA_MSPABI_Tag_enum_size 10 (Unused by GNU)
Note that Code_Model and Data_Model are always equal for GNU.
We define a new .gnu_attribute to keep track of the data region used.
Tag_GNU_MSP430_Data_Region 4
LOWER 1
ANY 2
See binutils-gdb/include/elf/msp430.h for the full details. */
static void
msp430_file_end (void)
{
#ifdef HAVE_AS_MSPABI_ATTRIBUTE
/* Enum for tag names. */
enum
{
OFBA_MSPABI_Tag_ISA = 4,
OFBA_MSPABI_Tag_Code_Model = 6,
OFBA_MSPABI_Tag_Data_Model = 8,
Tag_GNU_MSP430_Data_Region = 4
};
/* Enum for tag values. */
enum
{
OFBA_MSPABI_Val_ISA_MSP430 = 1,
OFBA_MSPABI_Val_ISA_MSP430X = 2,
OFBA_MSPABI_Val_Model_Small = 1,
OFBA_MSPABI_Val_Model_Large = 2,
Tag_GNU_MSP430_Data_Region_Lower = 1,
Tag_GNU_MSP430_Data_Region_Any = 2
};
/* .mspabi_attribute is a GNU assembler directive only. The assembler will
construct a .MSP430.attributes section based on the options it is invoked
with. The values it reads from these directives are used for validating
those options. */
const char *msp430_attr = ".mspabi_attribute";
const char *gnu_attr = ".gnu_attribute";
/* Emit .mspabi_attribute directive for OFBA_MSPABI_Tag_ISA. */
fprintf (asm_out_file, "\t%s %d, %d\n", msp430_attr, OFBA_MSPABI_Tag_ISA,
msp430x ? OFBA_MSPABI_Val_ISA_MSP430X : OFBA_MSPABI_Val_ISA_MSP430);
/* Emit .mspabi_attribute directive for OFBA_MSPABI_Tag_Code_Model. */
fprintf (asm_out_file, "\t%s %d, %d\n", msp430_attr,
OFBA_MSPABI_Tag_Code_Model,
TARGET_LARGE ? OFBA_MSPABI_Val_Model_Large
: OFBA_MSPABI_Val_Model_Small);
/* Emit .mspabi_attribute directive for OFBA_MSPABI_Tag_Data_Model. */
fprintf (asm_out_file, "\t%s %d, %d\n", msp430_attr,
OFBA_MSPABI_Tag_Data_Model,
TARGET_LARGE ? OFBA_MSPABI_Val_Model_Large
: OFBA_MSPABI_Val_Model_Small);
#ifdef HAVE_AS_GNU_ATTRIBUTE
/* Emit .gnu_attribute directive for Tag_GNU_MSP430_Data_Region. */
fprintf (asm_out_file, "\t%s %d, %d\n", gnu_attr, Tag_GNU_MSP430_Data_Region,
msp430_data_region == MSP430_REGION_LOWER
? Tag_GNU_MSP430_Data_Region_Lower
: Tag_GNU_MSP430_Data_Region_Any);
#endif
#endif
}
enum msp430_builtin
{
MSP430_BUILTIN_BIC_SR,
MSP430_BUILTIN_BIS_SR,
MSP430_BUILTIN_DELAY_CYCLES,
MSP430_BUILTIN_max
};
static GTY(()) tree msp430_builtins[(int) MSP430_BUILTIN_max];
static void
msp430_init_builtins (void)
{
tree void_ftype_int = build_function_type_list (void_type_node,
integer_type_node, NULL);
tree void_ftype_longlong
= build_function_type_list (void_type_node, long_long_integer_type_node,
NULL);
msp430_builtins[MSP430_BUILTIN_BIC_SR] =
add_builtin_function ( "__bic_SR_register_on_exit", void_ftype_int,
MSP430_BUILTIN_BIC_SR, BUILT_IN_MD, NULL, NULL_TREE);
msp430_builtins[MSP430_BUILTIN_BIS_SR] =
add_builtin_function ( "__bis_SR_register_on_exit", void_ftype_int,
MSP430_BUILTIN_BIS_SR, BUILT_IN_MD, NULL, NULL_TREE);
msp430_builtins[MSP430_BUILTIN_DELAY_CYCLES] =
add_builtin_function ( "__delay_cycles", void_ftype_longlong,
MSP430_BUILTIN_DELAY_CYCLES, BUILT_IN_MD, NULL,
NULL_TREE);
}
static tree
msp430_builtin_decl (unsigned code, bool initialize ATTRIBUTE_UNUSED)
{
switch (code)
{
case MSP430_BUILTIN_BIC_SR:
case MSP430_BUILTIN_BIS_SR:
case MSP430_BUILTIN_DELAY_CYCLES:
return msp430_builtins[code];
default:
return error_mark_node;
}
}
/* These constants are really register reads, which are faster than
regular constants. */
static int
cg_magic_constant (HOST_WIDE_INT c)
{
switch (c)
{
case 0xffff:
case -1:
case 0:
case 1:
case 2:
case 4:
case 8:
return 1;
default:
return 0;
}
}
static rtx
msp430_expand_delay_cycles (rtx arg)
{
HOST_WIDE_INT i, c, n;
/* extra cycles for MSP430X instructions */
#define CYCX(M,X) (msp430x ? (X) : (M))
if (GET_CODE (arg) != CONST_INT)
{
error ("__delay_cycles() only takes constant arguments");
return NULL_RTX;
}
c = INTVAL (arg);
if (HOST_BITS_PER_WIDE_INT > 32)
{
if (c < 0)
{
error ("__delay_cycles only takes non-negative cycle counts");
return NULL_RTX;
}
}
emit_insn (gen_delay_cycles_start (arg));
/* For 32-bit loops, there's 13(16) + 5(min(x,0x10000) + 6x cycles. */
if (c > 3 * 0xffff + CYCX (7, 10))
{
n = c;
/* There's 4 cycles in the short (i>0xffff) loop and 7 in the long
(x<=0xffff) loop. */
if (c >= 0x10000 * 7 + CYCX (14, 16))
{
i = 0x10000;
c -= CYCX (14, 16) + 7 * 0x10000;
i += c / 4;
c %= 4;
if ((unsigned long long) i > 0xffffffffULL)
{
error ("__delay_cycles is limited to 32-bit loop counts");
return NULL_RTX;
}
}
else
{
i = (c - CYCX (14, 16)) / 7;
c -= CYCX (14, 16) + i * 7;
}
if (cg_magic_constant (i & 0xffff))
c ++;
if (cg_magic_constant ((i >> 16) & 0xffff))
c ++;
if (msp430x)
emit_insn (gen_delay_cycles_32x (GEN_INT (i), GEN_INT (n - c)));
else
emit_insn (gen_delay_cycles_32 (GEN_INT (i), GEN_INT (n - c)));
}
/* For 16-bit loops, there's 7(10) + 3x cycles - so the max cycles is
0x30004(7). */
if (c > 12)
{
n = c;
i = (c - CYCX (7, 10)) / 3;
c -= CYCX (7, 10) + i * 3;
if (cg_magic_constant (i))
c ++;
if (msp430x)
emit_insn (gen_delay_cycles_16x (GEN_INT (i), GEN_INT (n - c)));
else
emit_insn (gen_delay_cycles_16 (GEN_INT (i), GEN_INT (n - c)));
}
while (c > 1)
{
emit_insn (gen_delay_cycles_2 ());
c -= 2;
}
if (c)
{
emit_insn (gen_delay_cycles_1 ());
c -= 1;
}
emit_insn (gen_delay_cycles_end (arg));
return NULL_RTX;
}
static rtx
msp430_expand_builtin (tree exp,
rtx target ATTRIBUTE_UNUSED,
rtx subtarget ATTRIBUTE_UNUSED,
machine_mode mode ATTRIBUTE_UNUSED,
int ignore ATTRIBUTE_UNUSED)
{
tree fndecl = TREE_OPERAND (CALL_EXPR_FN (exp), 0);
unsigned int fcode = DECL_MD_FUNCTION_CODE (fndecl);
rtx arg1 = expand_normal (CALL_EXPR_ARG (exp, 0));
if (fcode == MSP430_BUILTIN_DELAY_CYCLES)
return msp430_expand_delay_cycles (arg1);
if (! msp430_is_interrupt_func ())
{
error ("MSP430 builtin functions only work inside interrupt handlers");
return NULL_RTX;
}
if (! REG_P (arg1) && ! CONSTANT_P (arg1))
arg1 = force_reg (mode, arg1);
switch (fcode)
{
case MSP430_BUILTIN_BIC_SR: emit_insn (gen_bic_SR (arg1)); break;
case MSP430_BUILTIN_BIS_SR: emit_insn (gen_bis_SR (arg1)); break;
default:
internal_error ("bad builtin code");
break;
}
return NULL_RTX;
}
#undef TARGET_INIT_BUILTINS
#define TARGET_INIT_BUILTINS msp430_init_builtins
#undef TARGET_EXPAND_BUILTIN
#define TARGET_EXPAND_BUILTIN msp430_expand_builtin
#undef TARGET_BUILTIN_DECL
#define TARGET_BUILTIN_DECL msp430_builtin_decl
void
msp430_expand_prologue (void)
{
int i, j;
int fs;
/* Always use stack_pointer_rtx instead of calling
rtx_gen_REG ourselves. Code elsewhere in GCC assumes
that there is a single rtx representing the stack pointer,
namely stack_pointer_rtx, and uses == to recognize it. */
rtx sp = stack_pointer_rtx;
rtx p;
if (is_naked_func ())
{
/* We must generate some RTX as thread_prologue_and_epilogue_insns()
examines the output of the gen_prologue() function. */
emit_insn (gen_rtx_CLOBBER (VOIDmode, GEN_INT (0)));
return;
}
emit_insn (gen_prologue_start_marker ());
if (is_critical_func ())
{
emit_insn (gen_push_intr_state ());
emit_insn (gen_disable_interrupts ());
}
else if (is_reentrant_func ())
emit_insn (gen_disable_interrupts ());
if (!cfun->machine->computed)
msp430_compute_frame_info ();