| # configure.ac -- Backtrace configure script. | |
| # Copyright (C) 2012-2026 Free Software Foundation, Inc. | |
| # Redistribution and use in source and binary forms, with or without | |
| # modification, are permitted provided that the following conditions are | |
| # met: | |
| # (1) Redistributions of source code must retain the above copyright | |
| # notice, this list of conditions and the following disclaimer. | |
| # (2) Redistributions in binary form must reproduce the above copyright | |
| # notice, this list of conditions and the following disclaimer in | |
| # the documentation and/or other materials provided with the | |
| # distribution. | |
| # (3) The name of the author may not be used to | |
| # endorse or promote products derived from this software without | |
| # specific prior written permission. | |
| # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR | |
| # IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED | |
| # WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
| # DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, | |
| # INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
| # (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
| # SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | |
| # IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| # POSSIBILITY OF SUCH DAMAGE. | |
| AC_INIT(package-unused, version-unused,, libbacktrace) | |
| AC_CONFIG_SRCDIR(backtrace.h) | |
| AC_CONFIG_HEADER(config.h) | |
| if test -n "${with_target_subdir}"; then | |
| AM_ENABLE_MULTILIB(, ..) | |
| fi | |
| AC_CANONICAL_HOST | |
| AC_CANONICAL_TARGET | |
| target_alias=${target_alias-$host_alias} | |
| AC_USE_SYSTEM_EXTENSIONS | |
| libtool_VERSION=1:0:0 | |
| AC_SUBST(libtool_VERSION) | |
| # 1.11.1: Require that version of automake. | |
| # foreign: Don't require README, INSTALL, NEWS, etc. | |
| # no-define: Don't define PACKAGE and VERSION. | |
| # no-dependencies: Don't generate automatic dependencies. | |
| # (because it breaks when using bootstrap-lean, since some of the | |
| # headers are gone at "make install" time). | |
| # -Wall: Issue all automake warnings. | |
| # -Wno-portability: Don't warn about constructs supported by GNU make. | |
| # (because GCC requires GNU make anyhow). | |
| AM_INIT_AUTOMAKE([1.11.1 foreign no-dist no-define no-dependencies -Wall -Wno-portability]) | |
| AM_MAINTAINER_MODE | |
| AC_ARG_WITH(target-subdir, | |
| [ --with-target-subdir=SUBDIR Configuring in a subdirectory for target]) | |
| # We must force CC to /not/ be precious variables; otherwise | |
| # the wrong, non-multilib-adjusted value will be used in multilibs. | |
| # As a side effect, we have to subst CFLAGS ourselves. | |
| m4_rename([_AC_ARG_VAR_PRECIOUS],[backtrace_PRECIOUS]) | |
| m4_define([_AC_ARG_VAR_PRECIOUS],[]) | |
| AC_PROG_CC | |
| m4_rename_force([backtrace_PRECIOUS],[_AC_ARG_VAR_PRECIOUS]) | |
| AC_SUBST(CFLAGS) | |
| AC_PROG_RANLIB | |
| AC_PROG_AWK | |
| case "$AWK" in | |
| "") AC_MSG_ERROR([can't build without awk]) ;; | |
| esac | |
| AC_CHECK_PROG(DWZ, dwz, dwz) | |
| AM_CONDITIONAL(HAVE_DWZ, test "$DWZ" != "") | |
| LT_INIT | |
| AM_CONDITIONAL([ENABLE_DARWIN_AT_RPATH], [test x$enable_darwin_at_rpath = xyes]) | |
| AC_SYS_LARGEFILE | |
| backtrace_supported=yes | |
| if test -n "${with_target_subdir}"; then | |
| # We are compiling a GCC library. We can assume that the unwind | |
| # library exists. | |
| BACKTRACE_FILE="backtrace.lo simple.lo" | |
| else | |
| AC_CHECK_HEADER([unwind.h], | |
| [AC_CHECK_FUNC([_Unwind_Backtrace], | |
| [BACKTRACE_FILE="backtrace.lo simple.lo"], | |
| [BACKTRACE_FILE="nounwind.lo" | |
| backtrace_supported=no])], | |
| [BACKTRACE_FILE="nounwind.lo" | |
| backtrace_supported=no]) | |
| fi | |
| AC_SUBST(BACKTRACE_FILE) | |
| EXTRA_FLAGS= | |
| if test -n "${with_target_subdir}"; then | |
| EXTRA_FLAGS="-funwind-tables -frandom-seed=\$@" | |
| else | |
| AC_CACHE_CHECK([for -funwind-tables option], | |
| [libbacktrace_cv_c_unwind_tables], | |
| [CFLAGS_hold="$CFLAGS" | |
| CFLAGS="$CFLAGS -funwind-tables" | |
| AC_COMPILE_IFELSE( | |
| [AC_LANG_PROGRAM([static int f() { return 0; }], [return f();])], | |
| [libbacktrace_cv_c_unwind_tables=yes], | |
| [libbacktrace_cv_c_unwind_tables=no]) | |
| CFLAGS="$CFLAGS_hold"]) | |
| if test "$libbacktrace_cv_c_unwind_tables" = "yes"; then | |
| EXTRA_FLAGS=-funwind-tables | |
| fi | |
| AC_CACHE_CHECK([for -frandom-seed=string option], | |
| [libbacktrace_cv_c_random_seed_string], | |
| [CFLAGS_hold="$CFLAGS" | |
| CFLAGS="$CFLAGS -frandom-seed=conftest.lo" | |
| AC_COMPILE_IFELSE( | |
| [AC_LANG_PROGRAM([], [return 0;])], | |
| [libbacktrace_cv_c_random_seed_string=yes], | |
| [libbacktrace_cv_c_random_seed_string=no]) | |
| CFLAGS="$CFLAGS_hold"]) | |
| if test "$libbacktrace_cv_c_random_seed_string" = "yes"; then | |
| EXTRA_FLAGS="$EXTRA_FLAGS -frandom-seed=\$@" | |
| fi | |
| fi | |
| if test -n "${with_target_subdir}"; then | |
| # Add CET specific flags is Intel CET is enabled. | |
| GCC_CET_FLAGS(CET_FLAGS) | |
| EXTRA_FLAGS="$EXTRA_FLAGS $CET_FLAGS" | |
| fi | |
| AC_SUBST(EXTRA_FLAGS) | |
| ACX_PROG_CC_WARNING_OPTS([-W -Wall -Wwrite-strings -Wstrict-prototypes \ | |
| -Wmissing-prototypes -Wold-style-definition \ | |
| -Wmissing-format-attribute -Wcast-qual \ | |
| -Wno-attributes -Wno-unknown-attributes \ | |
| -Wpointer-arith], | |
| [WARN_FLAGS]) | |
| AC_ARG_ENABLE([werror], | |
| [AS_HELP_STRING([--disable-werror], [disable building with -Werror])]) | |
| AS_IF([test "x$enable_werror" != "xno" && test -n "${with_target_subdir}"], | |
| [WARN_FLAGS="$WARN_FLAGS -Werror"]) | |
| AC_SUBST(WARN_FLAGS) | |
| if test -n "${with_target_subdir}"; then | |
| GCC_CHECK_UNWIND_GETIPINFO | |
| else | |
| ac_save_CFFLAGS="$CFLAGS" | |
| CFLAGS="$CFLAGS -Werror-implicit-function-declaration" | |
| AC_MSG_CHECKING([for _Unwind_GetIPInfo]) | |
| AC_LINK_IFELSE( | |
| [AC_LANG_PROGRAM( | |
| [#include "unwind.h" | |
| struct _Unwind_Context *context; | |
| int ip_before_insn = 0;], | |
| [return _Unwind_GetIPInfo (context, &ip_before_insn);])], | |
| [have_unwind_getipinfo=yes], [have_unwind_getipinfo=no]) | |
| CFLAGS="$ac_save_CFLAGS" | |
| AC_MSG_RESULT([$have_unwind_getipinfo]) | |
| if test "$have_unwind_getipinfo" = "yes"; then | |
| AC_DEFINE(HAVE_GETIPINFO, 1, [Define if _Unwind_GetIPInfo is available.]) | |
| fi | |
| fi | |
| # Enable --enable-host-pie. | |
| AC_ARG_ENABLE(host-pie, | |
| [AS_HELP_STRING([--enable-host-pie], | |
| [build host code as PIE])], | |
| [PIC_FLAG=-fPIE], [PIC_FLAG=]) | |
| # Enable --enable-host-shared. | |
| AC_ARG_ENABLE(host-shared, | |
| [AS_HELP_STRING([--enable-host-shared], | |
| [build host code as shared libraries])], | |
| [PIC_FLAG=-fPIC]) | |
| AC_SUBST(PIC_FLAG) | |
| # Enable Intel CET on Intel CET enabled host if jit is enabled. | |
| GCC_CET_HOST_FLAGS(CET_HOST_FLAGS) | |
| case x$enable_languages in | |
| *jit*) | |
| ;; | |
| *) | |
| CET_HOST_FLAGS= | |
| ;; | |
| esac | |
| AC_SUBST(CET_HOST_FLAGS) | |
| # Test for __sync support. | |
| AC_CACHE_CHECK([__sync extensions], | |
| [libbacktrace_cv_sys_sync], | |
| [if test -n "${with_target_subdir}"; then | |
| case "${host}" in | |
| hppa*-*-hpux*) libbacktrace_cv_sys_sync=no ;; | |
| arm*-*-eabi*) | |
| # Older versions of the Arm architecture lack the necessary instructions | |
| # for these constructs, so check whether we can use them. | |
| AC_LINK_IFELSE( | |
| [AC_LANG_PROGRAM([int i;], | |
| [__sync_bool_compare_and_swap (&i, i, i); | |
| __sync_lock_test_and_set (&i, 1); | |
| __sync_lock_release (&i);])], | |
| [libbacktrace_cv_sys_sync=yes], | |
| [libbacktrace_cv_sys_sync=no]);; | |
| *) libbacktrace_cv_sys_sync=yes ;; | |
| esac | |
| else | |
| AC_LINK_IFELSE( | |
| [AC_LANG_PROGRAM([int i;], | |
| [__sync_bool_compare_and_swap (&i, i, i); | |
| __sync_lock_test_and_set (&i, 1); | |
| __sync_lock_release (&i);])], | |
| [libbacktrace_cv_sys_sync=yes], | |
| [libbacktrace_cv_sys_sync=no]) | |
| fi]) | |
| BACKTRACE_SUPPORTS_THREADS=0 | |
| if test "$libbacktrace_cv_sys_sync" = "yes"; then | |
| BACKTRACE_SUPPORTS_THREADS=1 | |
| AC_DEFINE([HAVE_SYNC_FUNCTIONS], 1, | |
| [Define to 1 if you have the __sync functions]) | |
| fi | |
| AC_SUBST(BACKTRACE_SUPPORTS_THREADS) | |
| # Test for __atomic support. | |
| AC_CACHE_CHECK([__atomic extensions], | |
| [libbacktrace_cv_sys_atomic], | |
| [if test -n "${with_target_subdir}"; then | |
| libbacktrace_cv_sys_atomic=yes | |
| else | |
| AC_LINK_IFELSE( | |
| [AC_LANG_PROGRAM([int i;], | |
| [__atomic_load_n (&i, __ATOMIC_ACQUIRE); | |
| __atomic_store_n (&i, 1, __ATOMIC_RELEASE);])], | |
| [libbacktrace_cv_sys_atomic=yes], | |
| [libbacktrace_cv_sys_atomic=no]) | |
| fi]) | |
| if test "$libbacktrace_cv_sys_atomic" = "yes"; then | |
| AC_DEFINE([HAVE_ATOMIC_FUNCTIONS], 1, | |
| [Define to 1 if you have the __atomic functions]) | |
| fi | |
| # The library needs to be able to read the executable itself. Compile | |
| # a file to determine the executable format. The awk script | |
| # filetype.awk prints out the file type. | |
| AC_CACHE_CHECK([output filetype], | |
| [libbacktrace_cv_sys_filetype], | |
| [filetype= | |
| AC_COMPILE_IFELSE( | |
| [AC_LANG_PROGRAM([int i;], [int j;])], | |
| [filetype=`${AWK} -f $srcdir/filetype.awk conftest.$ac_objext`], | |
| [AC_MSG_FAILURE([compiler failed])]) | |
| libbacktrace_cv_sys_filetype=$filetype]) | |
| # Match the file type to decide what files to compile. | |
| FORMAT_FILE= | |
| backtrace_supports_data=yes | |
| case "$libbacktrace_cv_sys_filetype" in | |
| elf*) FORMAT_FILE="elf.lo" ;; | |
| macho) FORMAT_FILE="macho.lo" ;; | |
| pecoff) FORMAT_FILE="pecoff.lo" | |
| backtrace_supports_data=no | |
| ;; | |
| xcoff*) FORMAT_FILE="xcoff.lo" | |
| backtrace_supports_data=no | |
| ;; | |
| *) AC_MSG_WARN([could not determine output file type]) | |
| FORMAT_FILE="unknown.lo" | |
| backtrace_supported=no | |
| ;; | |
| esac | |
| AC_SUBST(FORMAT_FILE) | |
| # ELF defines. | |
| elfsize= | |
| case "$libbacktrace_cv_sys_filetype" in | |
| elf32) elfsize=32 ;; | |
| elf64) elfsize=64 ;; | |
| *) elfsize=unused | |
| esac | |
| AC_DEFINE_UNQUOTED([BACKTRACE_ELF_SIZE], [$elfsize], [ELF size: 32 or 64]) | |
| AM_CONDITIONAL(HAVE_ELF, test "$FORMAT_FILE" = "elf.lo") | |
| # XCOFF defines. | |
| xcoffsize= | |
| case "$libbacktrace_cv_sys_filetype" in | |
| xcoff32) xcoffsize=32 ;; | |
| xcoff64) xcoffsize=64 ;; | |
| *) xcoffsize=unused | |
| esac | |
| AC_DEFINE_UNQUOTED([BACKTRACE_XCOFF_SIZE], [$xcoffsize], [XCOFF size: 32 or 64]) | |
| BACKTRACE_SUPPORTED=0 | |
| if test "$backtrace_supported" = "yes"; then | |
| BACKTRACE_SUPPORTED=1 | |
| fi | |
| AC_SUBST(BACKTRACE_SUPPORTED) | |
| BACKTRACE_SUPPORTS_DATA=0 | |
| if test "$backtrace_supports_data" = "yes"; then | |
| BACKTRACE_SUPPORTS_DATA=1 | |
| fi | |
| AC_SUBST(BACKTRACE_SUPPORTS_DATA) | |
| GCC_HEADER_STDINT(gstdint.h) | |
| AC_CHECK_HEADERS(sys/mman.h) | |
| if test "$ac_cv_header_sys_mman_h" = "no"; then | |
| have_mmap=no | |
| else | |
| if test -n "${with_target_subdir}"; then | |
| # When built as a GCC target library, we can't do a link test. We | |
| # simply assume that if we have mman.h, we have mmap. | |
| have_mmap=yes | |
| case "${host}" in | |
| *-*-msdosdjgpp) | |
| # DJGPP has sys/man.h, but no mmap | |
| have_mmap=no ;; | |
| esac | |
| else | |
| AC_CHECK_FUNC(mmap, [have_mmap=yes], [have_mmap=no]) | |
| fi | |
| fi | |
| if test "$have_mmap" = "no"; then | |
| VIEW_FILE=read.lo | |
| ALLOC_FILE=alloc.lo | |
| else | |
| VIEW_FILE=mmapio.lo | |
| AC_PREPROC_IFELSE([AC_LANG_SOURCE([ | |
| #include <sys/mman.h> | |
| #if !defined(MAP_ANONYMOUS) && !defined(MAP_ANON) | |
| #error no MAP_ANONYMOUS | |
| #endif | |
| ])], [ALLOC_FILE=mmap.lo], [ALLOC_FILE=alloc.lo]) | |
| fi | |
| AC_SUBST(VIEW_FILE) | |
| AC_SUBST(ALLOC_FILE) | |
| BACKTRACE_USES_MALLOC=0 | |
| if test "$ALLOC_FILE" = "alloc.lo"; then | |
| BACKTRACE_USES_MALLOC=1 | |
| fi | |
| AC_SUBST(BACKTRACE_USES_MALLOC) | |
| # Check for dl_iterate_phdr. | |
| AC_CHECK_HEADERS(link.h sys/link.h) | |
| if test "$ac_cv_header_link_h" = "no" -a "$ac_cv_header_sys_link_h" = "no"; then | |
| have_dl_iterate_phdr=no | |
| else | |
| if test -n "${with_target_subdir}"; then | |
| link_h=link.h | |
| if test "$ac_cv_header_link_h" = "no"; then | |
| link_h=sys/link.h | |
| fi | |
| # When built as a GCC target library, we can't do a link test. | |
| AC_EGREP_HEADER([dl_iterate_phdr], [$link_h], [have_dl_iterate_phdr=yes], | |
| [have_dl_iterate_phdr=no]) | |
| else | |
| AC_CHECK_FUNC([dl_iterate_phdr], [have_dl_iterate_phdr=yes], | |
| [have_dl_iterate_phdr=no]) | |
| fi | |
| fi | |
| if test "$have_dl_iterate_phdr" = "yes"; then | |
| AC_DEFINE(HAVE_DL_ITERATE_PHDR, 1, [Define if dl_iterate_phdr is available.]) | |
| fi | |
| # Check for header file for Mach-O image functions. | |
| AC_CHECK_HEADERS(mach-o/dyld.h) | |
| # Check for loadquery. | |
| AC_CHECK_HEADERS(sys/ldr.h) | |
| if test "$ac_cv_header_sys_ldr_h" = "no"; then | |
| have_loadquery=no | |
| else | |
| if test -n "${with_target_subdir}"; then | |
| # When built as a GCC target library, we can't do a link test. | |
| AC_EGREP_HEADER([loadquery], [sys/ldr.h], [have_loadquery=yes], | |
| [have_loadquery=no]) | |
| else | |
| AC_CHECK_FUNC([loadquery], [have_loadquery=yes], | |
| [have_loadquery=no]) | |
| fi | |
| fi | |
| if test "$have_loadquery" = "yes"; then | |
| AC_DEFINE(HAVE_LOADQUERY, 1, [Define if AIX loadquery is available.]) | |
| fi | |
| AC_CHECK_HEADERS(windows.h) | |
| AC_CHECK_HEADERS(tlhelp32.h, [], [], | |
| [#ifdef HAVE_WINDOWS_H | |
| # include <windows.h> | |
| #endif]) | |
| # Check for the fcntl function. | |
| if test -n "${with_target_subdir}"; then | |
| case "${host}" in | |
| *-*-mingw*) have_fcntl=no ;; | |
| *) have_fcntl=yes ;; | |
| esac | |
| else | |
| AC_CHECK_FUNC(fcntl, [have_fcntl=yes], [have_fcntl=no]) | |
| fi | |
| if test "$have_fcntl" = "yes"; then | |
| AC_DEFINE([HAVE_FCNTL], 1, | |
| [Define to 1 if you have the fcntl function]) | |
| fi | |
| AC_CHECK_DECLS([strnlen, getpagesize]) | |
| AC_CHECK_FUNCS(lstat readlink) | |
| # Check for getexecname function. | |
| if test -n "${with_target_subdir}"; then | |
| case "${host}" in | |
| *-*-solaris2*) have_getexecname=yes ;; | |
| *) have_getexecname=no ;; | |
| esac | |
| else | |
| AC_CHECK_FUNC(getexecname, [have_getexecname=yes], [have_getexecname=no]) | |
| fi | |
| if test "$have_getexecname" = "yes"; then | |
| AC_DEFINE(HAVE_GETEXECNAME, 1, [Define if getexecname is available.]) | |
| fi | |
| # Check for _pgmptr variable, contains the executable filename on windows | |
| AC_CHECK_DECLS([_pgmptr]) | |
| # Check for sysctl definitions. | |
| AC_CACHE_CHECK([for KERN_PROC], | |
| [libbacktrace_cv_proc], | |
| [AC_COMPILE_IFELSE( | |
| [AC_LANG_PROGRAM([ | |
| #include <sys/types.h> | |
| #include <sys/sysctl.h> | |
| ], [int mib0 = CTL_KERN; int mib1 = KERN_PROC; int mib2 = KERN_PROC_PATHNAME;])], | |
| [libbacktrace_cv_proc=yes], | |
| [libbacktrace_cv_proc=no])]) | |
| if test "$libbacktrace_cv_proc" = "yes"; then | |
| AC_DEFINE([HAVE_KERN_PROC], 1, | |
| [Define to 1 if you have KERN_PROC and KERN_PROC_PATHNAME in <sys/sysctl.h>.]) | |
| fi | |
| AC_CACHE_CHECK([for KERN_PROG_ARGS], | |
| [libbacktrace_cv_procargs], | |
| [AC_COMPILE_IFELSE( | |
| [AC_LANG_PROGRAM([ | |
| #include <sys/types.h> | |
| #include <sys/sysctl.h> | |
| ], [int mib0 = CTL_KERN; int mib1 = KERN_PROC_ARGS; int mib2 = KERN_PROC_PATHNAME;])], | |
| [libbacktrace_cv_procargs=yes], | |
| [libbacktrace_cv_procargs=no])]) | |
| if test "$libbacktrace_cv_procargs" = "yes"; then | |
| AC_DEFINE([HAVE_KERN_PROC_ARGS], 1, | |
| [Define to 1 if you have KERN_PROCARGS and KERN_PROC_PATHNAME in <sys/sysctl.h>.]) | |
| fi | |
| # Check for the clock_gettime function. | |
| AC_CHECK_FUNCS(clock_gettime) | |
| clock_gettime_link= | |
| # At least for glibc, clock_gettime is in librt. But don't | |
| # pull that in if it still doesn't give us the function we want. This | |
| # test is copied from libgomp, and modified to not link in -lrt as | |
| # we're using this for test timing only. | |
| if test "$ac_cv_func_clock_gettime" = no; then | |
| AC_CHECK_LIB(rt, clock_gettime, | |
| [CLOCK_GETTIME_LINK=-lrt | |
| AC_DEFINE(HAVE_CLOCK_GETTIME, 1, | |
| [Define to 1 if you have the `clock_gettime' function.])]) | |
| fi | |
| AC_SUBST(CLOCK_GETTIME_LINK) | |
| dnl Test whether the compiler supports the -pthread option. | |
| AC_CACHE_CHECK([whether -pthread is supported], | |
| [libgo_cv_lib_pthread], | |
| [CFLAGS_hold=$CFLAGS | |
| CFLAGS="$CFLAGS -pthread" | |
| AC_COMPILE_IFELSE([AC_LANG_SOURCE([int i;])], | |
| [libgo_cv_lib_pthread=yes], | |
| [libgo_cv_lib_pthread=no]) | |
| CFLAGS=$CFLAGS_hold]) | |
| PTHREAD_CFLAGS= | |
| if test "$libgo_cv_lib_pthread" = yes; then | |
| PTHREAD_CFLAGS=-pthread | |
| fi | |
| AC_SUBST(PTHREAD_CFLAGS) | |
| AM_CONDITIONAL(HAVE_PTHREAD, test "$libgo_cv_lib_pthread" = yes) | |
| dnl Test whether the compiler and the linker support the -gdwarf-5 option. | |
| AC_CACHE_CHECK([whether -gdwarf-5 is supported], | |
| [libbacktrace_cv_lib_dwarf5], | |
| [CFLAGS_hold=$CFLAGS | |
| CFLAGS="$CFLAGS -gdwarf-5" | |
| AC_LINK_IFELSE([AC_LANG_PROGRAM([int i;], [return 0;])], | |
| [libbacktrace_cv_lib_dwarf5=yes], | |
| [libbacktrace_cv_lib_dwarf5=no]) | |
| CFLAGS=$CFLAGS_hold]) | |
| AM_CONDITIONAL(HAVE_DWARF5, test "$libbacktrace_cv_lib_dwarf5" = yes) | |
| AC_CHECK_LIB([z], [compress], | |
| [AC_DEFINE(HAVE_ZLIB, 1, [Define if -lz is available.])]) | |
| AM_CONDITIONAL(HAVE_ZLIB, test "$ac_cv_lib_z_compress" = yes) | |
| dnl Test whether the linker supports the --build-id option. | |
| AC_CACHE_CHECK([whether --build-id is supported], | |
| [libbacktrace_cv_ld_buildid], | |
| [LDFLAGS_hold=$LDFLAGS | |
| LDFLAGS="$LDFLAGS -Wl,--build-id" | |
| AC_LINK_IFELSE([AC_LANG_PROGRAM(,)], | |
| [libbacktrace_cv_ld_buildid=yes], | |
| [libbacktrace_cv_ld_buildid=no]) | |
| LDFLAGS=$LDFLAGS_hold]) | |
| AM_CONDITIONAL(HAVE_BUILDID, test "$libbacktrace_cv_ld_buildid" = yes) | |
| dnl Test whether the linker supports the --compress-debug-sections=zlib-gnu | |
| dnl option. | |
| AC_CACHE_CHECK([whether --compress-debug-sections=zlib-gnu is supported], | |
| [libgo_cv_ld_compress_zlib_gnu], | |
| [LDFLAGS_hold=$LDFLAGS | |
| LDFLAGS="$LDFLAGS -Wl,--compress-debug-sections=zlib-gnu" | |
| AC_LINK_IFELSE([AC_LANG_PROGRAM(,)], | |
| [libgo_cv_ld_compress_zlib_gnu=yes], | |
| [libgo_cv_ld_compress_zlib_gnu=no]) | |
| LDFLAGS=$LDFLAGS_hold]) | |
| AM_CONDITIONAL(HAVE_COMPRESSED_DEBUG_ZLIB_GNU, test "$libgo_cv_ld_compress_zlib_gnu" = yes) | |
| AC_CACHE_CHECK([whether --compress-debug-sections=zlib-gabi is supported], | |
| [libgo_cv_ld_compress_zlib_gabi], | |
| [LDFLAGS_hold=$LDFLAGS | |
| LDFLAGS="$LDFLAGS -Wl,--compress-debug-sections=zlib-gabi" | |
| AC_LINK_IFELSE([AC_LANG_PROGRAM(,)], | |
| [libgo_cv_ld_compress_zlib_gabi=yes], | |
| [libgo_cv_ld_compress_zlib_gabi=no]) | |
| LDFLAGS=$LDFLAGS_hold]) | |
| AM_CONDITIONAL(HAVE_COMPRESSED_DEBUG_ZLIB_GABI, test "$libgo_cv_ld_compress_zlib_gabi" = yes) | |
| AC_CHECK_LIB([zstd], [ZSTD_compress], | |
| [AC_DEFINE(HAVE_ZSTD, 1, [Define if -lzstd is available.])]) | |
| AM_CONDITIONAL(HAVE_ZSTD, test "$ac_cv_lib_zstd_ZSTD_compress" = yes) | |
| dnl Test whether the linker supports --compress-debug-sections=zstd option. | |
| AC_CACHE_CHECK([whether --compress-debug-sections=zstd is supported], | |
| [libgo_cv_ld_compress_zstd], | |
| [LDFLAGS_hold=$LDFLAGS | |
| LDFLAGS="$LDFLAGS -Wl,--compress-debug-sections=zstd" | |
| AC_LINK_IFELSE([AC_LANG_PROGRAM(,)], | |
| [libgo_cv_ld_compress_zstd=yes], | |
| [libgo_cv_ld_compress_zstd=no]) | |
| LDFLAGS=$LDFLAGS_hold]) | |
| AM_CONDITIONAL(HAVE_COMPRESSED_DEBUG_ZSTD, test "$libgo_cv_ld_compress_zstd" = yes) | |
| AC_ARG_VAR(OBJCOPY, [location of objcopy]) | |
| AC_CHECK_PROG(OBJCOPY, objcopy, objcopy,) | |
| AC_CHECK_PROG(READELF, readelf, readelf) | |
| AC_CACHE_CHECK([whether objcopy supports --strip-debug], | |
| [libbacktrace_cv_objcopy_stripdebug], | |
| [if test -n "${with_target_subdir}"; then | |
| libbacktrace_cv_objcopy_stripdebug=no | |
| elif ! test -n "${OBJCOPY}"; then | |
| libbacktrace_cv_objcopy_stripdebug=no | |
| elif ${OBJCOPY} --help | grep strip-debug >/dev/null 2>&1; then | |
| libbacktrace_cv_objcopy_stripdebug=yes | |
| else | |
| libbacktrace_cv_objcopy_stripdebug=no | |
| fi]) | |
| AM_CONDITIONAL(HAVE_OBJCOPY_STRIPDEBUG, test "$libbacktrace_cv_objcopy_stripdebug" = yes) | |
| AC_CACHE_CHECK([whether objcopy supports debuglink], | |
| [libbacktrace_cv_objcopy_debuglink], | |
| [if test -n "${with_target_subdir}"; then | |
| libbacktrace_cv_objcopy_debuglink=no | |
| elif ! test -n "${OBJCOPY}"; then | |
| libbacktrace_cv_objcopy_debuglink=no | |
| elif ${OBJCOPY} --help | grep add-gnu-debuglink >/dev/null 2>&1; then | |
| libbacktrace_cv_objcopy_debuglink=yes | |
| else | |
| libbacktrace_cv_objcopy_debuglink=no | |
| fi]) | |
| AM_CONDITIONAL(HAVE_OBJCOPY_DEBUGLINK, test "$libbacktrace_cv_objcopy_debuglink" = yes) | |
| AC_ARG_VAR(DSYMUTIL, [location of dsymutil]) | |
| AC_CHECK_PROG(DSYMUTIL, dsymutil, dsymutil) | |
| AM_CONDITIONAL(USE_DSYMUTIL, test -n "${DSYMUTIL}" -a "$FORMAT_FILE" = "macho.lo") | |
| AC_ARG_VAR(NM, [location of nm]) | |
| AC_CHECK_PROG(NM, nm, nm) | |
| AC_CHECK_PROG(XZ, xz, xz) | |
| AM_CONDITIONAL(HAVE_XZ, test "$XZ" != "") | |
| AC_CHECK_PROG(COMM, comm, comm) | |
| AM_CONDITIONAL(HAVE_COMM, test "$COMM" != "") | |
| AM_CONDITIONAL(HAVE_MINIDEBUG, | |
| test "${with_target_subdir}" = "" -a "$FORMAT_FILE" = "elf.lo" -a "${OBJCOPY}" != "" -a "${NM}" != "" -a "${XZ}" != "" -a "${COMM}" != "") | |
| AC_CHECK_LIB([lzma], [lzma_auto_decoder], | |
| [AC_DEFINE(HAVE_LIBLZMA, 1, [Define if -llzma is available.])]) | |
| AM_CONDITIONAL(HAVE_LIBLZMA, test "$ac_cv_lib_lzma_lzma_auto_decoder" = yes) | |
| AC_CACHE_CHECK([whether tests can run], | |
| [libbacktrace_cv_sys_native], | |
| [AC_RUN_IFELSE([AC_LANG_PROGRAM([], [return 0;])], | |
| [libbacktrace_cv_sys_native=yes], | |
| [libbacktrace_cv_sys_native=no], | |
| [libbacktrace_cv_sys_native=no])]) | |
| AM_CONDITIONAL(NATIVE, test "$libbacktrace_cv_sys_native" = "yes") | |
| if test "${multilib}" = "yes"; then | |
| multilib_arg="--enable-multilib" | |
| else | |
| multilib_arg= | |
| fi | |
| AC_CONFIG_FILES(Makefile backtrace-supported.h) | |
| AC_CONFIG_FILES(install-debuginfo-for-buildid.sh, chmod +x install-debuginfo-for-buildid.sh) | |
| # We need multilib support, but only if configuring for the target. | |
| AC_CONFIG_COMMANDS([default], | |
| [if test -n "$CONFIG_FILES"; then | |
| if test -n "${with_target_subdir}"; then | |
| # Multilibs need MULTISUBDIR defined correctly in certain makefiles so | |
| # that multilib installs will end up installed in the correct place. | |
| # The testsuite needs it for multilib-aware ABI baseline files. | |
| # To work around this not being passed down from config-ml.in -> | |
| # srcdir/Makefile.am -> srcdir/{src,libsupc++,...}/Makefile.am, manually | |
| # append it here. Only modify Makefiles that have just been created. | |
| # | |
| # Also, get rid of this simulated-VPATH thing that automake does. | |
| cat > vpsed << \_EOF | |
| s!`test -f '$<' || echo '$(srcdir)/'`!! | |
| _EOF | |
| for i in $SUBDIRS; do | |
| case $CONFIG_FILES in | |
| *${i}/Makefile*) | |
| #echo "Adding MULTISUBDIR to $i/Makefile" | |
| sed -f vpsed $i/Makefile > tmp | |
| grep '^MULTISUBDIR =' Makefile >> tmp | |
| mv tmp $i/Makefile | |
| ;; | |
| esac | |
| done | |
| rm vpsed | |
| fi | |
| fi | |
| ], | |
| [ | |
| # Variables needed in config.status (file generation) which aren't already | |
| # passed by autoconf. | |
| SUBDIRS="$SUBDIRS" | |
| ]) | |
| AC_OUTPUT |