blob: 18ee984bb4e02d6bcf0158fc66c46f4c3e9d506f [file] [log] [blame]
------------------------------------------------------------------------------
-- --
-- GNAT COMPILER COMPONENTS --
-- --
-- G N A T . S E R I A L _ C O M M U N I C A T I O N S --
-- --
-- S p e c --
-- --
-- Copyright (C) 2007-2014, AdaCore --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
-- ware Foundation; either version 3, or (at your option) any later ver- --
-- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
-- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
-- or FITNESS FOR A PARTICULAR PURPOSE. --
-- --
-- As a special exception under Section 7 of GPL version 3, you are granted --
-- additional permissions described in the GCC Runtime Library Exception, --
-- version 3.1, as published by the Free Software Foundation. --
-- --
-- You should have received a copy of the GNU General Public License and --
-- a copy of the GCC Runtime Library Exception along with this program; --
-- see the files COPYING3 and COPYING.RUNTIME respectively. If not, see --
-- <http://www.gnu.org/licenses/>. --
-- --
-- GNAT was originally developed by the GNAT team at New York University. --
-- Extensive contributions were provided by Ada Core Technologies Inc. --
-- --
------------------------------------------------------------------------------
-- Serial communications package, implemented on Windows and GNU/Linux
with Ada.Streams;
with Interfaces.C;
package GNAT.Serial_Communications is
Serial_Error : exception;
-- Raised when a communication problem occurs
type Port_Name is new String;
-- A serial com port name
function Name (Number : Positive) return Port_Name;
-- Returns a possible port name for the given legacy PC architecture serial
-- port number (COM<number>: on Windows, ttyS<number-1> on Linux).
-- Note that this function does not support other kinds of serial ports
-- nor operating systems other than Windows and Linux. For all other
-- cases, an explicit port name can be passed directly to Open.
type Data_Rate is
(B1200, B2400, B4800, B9600, B19200, B38400, B57600, B115200);
-- Speed of the communication
type Data_Bits is (CS8, CS7);
-- Communication bits
type Stop_Bits_Number is (One, Two);
-- One or two stop bits
type Parity_Check is (None, Even, Odd);
-- Either no parity check or an even or odd parity
type Flow_Control is (None, RTS_CTS, Xon_Xoff);
-- No flow control, hardware flow control, software flow control
type Serial_Port is new Ada.Streams.Root_Stream_Type with private;
procedure Open
(Port : out Serial_Port;
Name : Port_Name);
-- Open the given port name. Raises Serial_Error if the port cannot be
-- opened.
procedure Set
(Port : Serial_Port;
Rate : Data_Rate := B9600;
Bits : Data_Bits := CS8;
Stop_Bits : Stop_Bits_Number := One;
Parity : Parity_Check := None;
Block : Boolean := True;
Local : Boolean := True;
Flow : Flow_Control := None;
Timeout : Duration := 10.0);
-- The communication port settings. If Block is set then a read call
-- will wait for the whole buffer to be filed. If Block is not set then
-- the given Timeout (in seconds) is used. If Local is set then modem
-- control lines (in particular DCD) are ignored (not supported on
-- Windows). Flow indicates the flow control type as defined above.
-- Note: the timeout precision may be limited on some implementation
-- (e.g. on GNU/Linux the maximum precision is a tenth of seconds).
-- Note: calling this procedure may reinitialize the serial port hardware
-- and thus cause loss of some buffered data if used during communication.
overriding procedure Read
(Port : in out Serial_Port;
Buffer : out Ada.Streams.Stream_Element_Array;
Last : out Ada.Streams.Stream_Element_Offset);
-- Read a set of bytes, put result into Buffer and set Last accordingly.
-- Last is set to Buffer'First - 1 if no byte has been read, unless
-- Buffer'First = Stream_Element_Offset'First, in which case the exception
-- Constraint_Error is raised instead.
overriding procedure Write
(Port : in out Serial_Port;
Buffer : Ada.Streams.Stream_Element_Array);
-- Write buffer into the port
procedure Close (Port : in out Serial_Port);
-- Close port
private
type Port_Data;
type Port_Data_Access is access Port_Data;
type Serial_Port is new Ada.Streams.Root_Stream_Type with record
H : Port_Data_Access;
end record;
Data_Rate_Value : constant array (Data_Rate) of Interfaces.C.unsigned :=
(B1200 => 1_200,
B2400 => 2_400,
B4800 => 4_800,
B9600 => 9_600,
B19200 => 19_200,
B38400 => 38_400,
B57600 => 57_600,
B115200 => 115_200);
end GNAT.Serial_Communications;