| ------------------------------------------------------------------------------ |
| -- -- |
| -- GNAT COMPILER COMPONENTS -- |
| -- -- |
| -- S T Y L E S W -- |
| -- -- |
| -- S p e c -- |
| -- -- |
| -- Copyright (C) 1992-2008, Free Software Foundation, Inc. -- |
| -- -- |
| -- GNAT is free software; you can redistribute it and/or modify it under -- |
| -- terms of the GNU General Public License as published by the Free Soft- -- |
| -- ware Foundation; either version 3, or (at your option) any later ver- -- |
| -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- |
| -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- |
| -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- |
| -- for more details. You should have received a copy of the GNU General -- |
| -- Public License distributed with GNAT; see file COPYING3. If not, go to -- |
| -- http://www.gnu.org/licenses for a complete copy of the license. -- |
| -- -- |
| -- GNAT was originally developed by the GNAT team at New York University. -- |
| -- Extensive contributions were provided by Ada Core Technologies Inc. -- |
| -- -- |
| ------------------------------------------------------------------------------ |
| |
| -- This package contains the style switches used for setting style options. |
| -- The only clients of this package are the body of Style and the body of |
| -- Switches. All other style checking issues are handled using the public |
| -- interfaces in the spec of Style. |
| |
| with Types; use Types; |
| |
| package Stylesw is |
| |
| -------------------------- |
| -- Style Check Switches -- |
| -------------------------- |
| |
| -- These flags are used to control the details of the style checking |
| -- options. The default values shown here correspond to no style checking. |
| |
| -- If any of these values is set to a non-default value, then |
| -- Opt.Style_Check is set True to active calls to this package. |
| |
| -- The actual mechanism for setting these switches to other than default |
| -- values is via the Set_Style_Check_Option procedure or through a call to |
| -- Set_Default_Style_Check_Options. They should not be set directly in any |
| -- other manner. |
| |
| Style_Check_Array_Attribute_Index : Boolean := False; |
| -- This can be set True by using -gnatg or -gnatyA switches. If it is True |
| -- then index numbers for array attributes (like Length) are required to |
| -- be absent for one-dimensional arrays and present for multi-dimensional |
| -- array attribute references. |
| |
| Style_Check_Attribute_Casing : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatya switches. If it is |
| -- True, then attribute names (including keywords such as digits used as |
| -- attribute names) must be in mixed case. |
| |
| Style_Check_Blanks_At_End : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatyb switches. If it is |
| -- True, then spaces at the end of lines are not permitted. |
| |
| Style_Check_Blank_Lines : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatyu switches. If it is |
| -- True, then multiple blank lines are not permitted, and there may not be |
| -- a blank line at the end of the file. |
| |
| Style_Check_Comments : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatyc switches. If it is |
| -- True, then comments are style checked as follows: |
| -- |
| -- All comments must be at the start of the line, or the first minus must |
| -- be preceded by at least one space. |
| -- |
| -- For a comment that is not at the start of a line, the only requirement |
| -- is that a space follow the comment characters. |
| -- |
| -- For a comment that is at the start of the line, one of the following |
| -- conditions must hold: |
| -- |
| -- The comment characters are the only non-blank characters on the line |
| -- |
| -- The comment characters are followed by an exclamation point (the |
| -- sequence --! is used by gnatprep for marking deleted lines). |
| -- |
| -- The comment characters are followed by two space characters |
| -- |
| -- The line consists entirely of minus signs |
| -- |
| -- The comment characters are followed by a single space, and the last |
| -- two characters on the line are also comment characters. |
| -- |
| -- Note: the reason for the last two conditions is to allow "boxed" |
| -- comments where only a single space separates the comment characters. |
| |
| Style_Check_DOS_Line_Terminator : Boolean := False; |
| -- This can be set true by using the -gnatg or -gnatyd switches. If it |
| -- is True, then the line terminator must be a single LF, without an |
| -- associated CR (e.g. DOS line terminator sequence CR/LF not allowed). |
| |
| Style_Check_End_Labels : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatye switches. If it is |
| -- True, then optional END labels must always be present. |
| |
| Style_Check_Form_Feeds : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatyf switches. If it is |
| -- True, then form feeds and vertical tabs are not allowed in the source |
| -- text. |
| |
| Style_Check_Horizontal_Tabs : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatyh switches. If it is |
| -- True, then horizontal tabs are not allowed in source text. |
| |
| Style_Check_If_Then_Layout : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatyi switches. If it is |
| -- True, then a THEN keyword may not appear on the line that immediately |
| -- follows the line containing the corresponding IF. |
| -- |
| -- This permits one of two styles for IF-THEN layout. Either the IF and |
| -- THEN keywords are on the same line, where the condition is short enough, |
| -- or the conditions are continued over to the lines following the IF and |
| -- the THEN stands on its own. For example: |
| -- |
| -- if X > Y then |
| -- |
| -- if X > Y |
| -- and then Y < Z |
| -- then |
| -- |
| -- are allowed, but |
| -- |
| -- if X > Y |
| -- then |
| -- |
| -- is not allowed. |
| |
| Style_Check_Indentation : Column_Number range 0 .. 9 := 0; |
| -- This can be set non-zero by using the -gnatg or -gnatyn (n a digit) |
| -- switches. If it is non-zero it activates indentation checking with the |
| -- indicated indentation value. A value of zero turns off checking. The |
| -- requirement is that any new statement, line comment, declaration or |
| -- keyword such as END, start on a column that is a multiple of the |
| -- indentation value. |
| |
| Style_Check_Keyword_Casing : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatyk switches. If it is |
| -- True, then keywords are required to be in all lower case. This rule does |
| -- not apply to keywords such as digits appearing as an attribute name. |
| |
| Style_Check_Layout : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatyl switches. If it is |
| -- True, it activates checks that constructs are indented as suggested by |
| -- the examples in the RM syntax, e.g. that the ELSE keyword must line up |
| -- with the IF keyword. |
| |
| Style_Check_Max_Line_Length : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatym/M switches. |
| -- If it is True, it activates checking for a maximum line length of |
| -- Style_Max_Line_Length characters. |
| |
| Style_Check_Max_Nesting_Level : Boolean := False; |
| -- This can be set True by using -gnatyLnnn with a value other than zero |
| -- (a value of zero resets it to False). If True, it activates checking |
| -- the maximum nesting level against Style_Max_Nesting_Level. |
| |
| Style_Check_Missing_Overriding : Boolean := False; |
| -- This can be set True by using the -gnatyO switch. If it is True, then |
| -- "[not] overriding" is required in subprogram declarations and bodies |
| -- where appropriate. |
| |
| Style_Check_Mode_In : Boolean := False; |
| -- This can be set True by using -gnatyI. If True, it activates checking |
| -- that mode IN is not used on its own (since it is the default). |
| |
| Style_Check_Order_Subprograms : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatyo switch. If it is |
| -- True, then names of subprogram bodies must be in alphabetical order |
| -- (not taking casing into account). |
| |
| Style_Check_Pragma_Casing : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatyp switches. If it is |
| -- True, then pragma names must use mixed case. |
| |
| Style_Check_References : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatyr switches. If it is |
| -- True, then all references to declared identifiers are checked. The |
| -- requirement is that casing of the reference be the same as the casing |
| -- of the corresponding declaration. |
| |
| Style_Check_Separate_Stmt_Lines : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatyS switches. If it is |
| -- TRUE, then for the case of keywords THEN (not preceded by AND) or ELSE |
| -- (not preceded by OR) which introduce a conditionally executed statement |
| -- sequence, there must be no tokens on the same line as the keyword, so |
| -- that coverage testing can clearly identify execution of the statement |
| -- sequence. A comment is permitted, as is THEN ABORT or a PRAGMA keyword |
| -- after ELSE (a common style to specify the condition for the ELSE). |
| |
| Style_Check_Specs : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatys switches. If it is |
| -- True, then separate specs are required to be present for all procedures |
| -- except parameterless library level procedures. The exception means that |
| -- typical main programs do not require separate specs. |
| |
| Style_Check_Standard : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatyn switches. If it is |
| -- True, then any references to names in Standard have to be in mixed case |
| -- mode (e.g. Integer, Boolean). |
| |
| Style_Check_Tokens : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatyt switches. If it is |
| -- True, then the style check that requires canonical spacing between |
| -- various punctuation tokens as follows: |
| -- |
| -- ABS and NOT must be followed by a space |
| -- |
| -- => must be surrounded by spaces |
| -- |
| -- <> must be preceded by a space or left paren |
| -- |
| -- Binary operators other than ** must be surrounded by spaces. |
| -- |
| -- There is no restriction on the layout of the ** binary operator. |
| -- |
| -- Colon must be surrounded by spaces |
| -- |
| -- Colon-equal (assignment) must be surrounded by spaces |
| -- |
| -- Comma must be the first non-blank character on the line, or be |
| -- immediately preceded by a non-blank character, and must be followed |
| -- by a blank. |
| -- |
| -- A space must precede a left paren following a digit or letter, and a |
| -- right paren must not be followed by a space (it can be at the end of |
| -- the line). |
| -- |
| -- A right paren must either be the first non-blank character on a line, |
| -- or it must be preceded by a non-blank character. |
| -- |
| -- A semicolon must not be preceded by a blank, and must not be followed |
| -- by a non-blank character. |
| -- |
| -- A unary plus or minus may not be followed by a space |
| -- |
| -- A vertical bar must be surrounded by spaces |
| -- |
| -- Note that a requirement that a token be preceded by a space is met by |
| -- placing the token at the start of the line, and similarly a requirement |
| -- that a token be followed by a space is met by placing the token at |
| -- the end of the line. Note that in the case where horizontal tabs are |
| -- permitted, a horizontal tab is acceptable for meeting the requirement |
| -- for a space. |
| |
| Style_Check_Xtra_Parens : Boolean := False; |
| -- This can be set True by using the -gnatg or -gnatyx switch. If true, |
| -- then it is not allowed to enclose entire conditional expressions in |
| -- parentheses (C style). |
| |
| Style_Max_Line_Length : Int := 0; |
| -- Value used to check maximum line length. Gets reset as a result of use |
| -- of -gnatym or -gnatyMnnn switches (or by use of -gnatg). This value is |
| -- only read if Style_Check_Max_Line_Length is True. |
| |
| Style_Max_Nesting_Level : Int := 0; |
| -- Value used to check maximum nesting level. Gets reset as a result |
| -- of use of the -gnatyLnnn switch. This value is only read if |
| -- Style_Check_Max_Nesting_Level is True. |
| |
| ----------------- |
| -- Subprograms -- |
| ----------------- |
| |
| procedure Set_Default_Style_Check_Options; |
| -- This procedure is called to set the default style checking options in |
| -- response to a -gnaty switch with no suboptions or from -gnatyy. |
| |
| procedure Set_GNAT_Style_Check_Options; |
| -- This procedure is called to set the default style checking options for |
| -- GNAT units (as set by -gnatg or -gnatyg). |
| |
| Style_Msg_Buf : String (1 .. 80); |
| Style_Msg_Len : Natural; |
| -- Used to return |
| |
| procedure Set_Style_Check_Options |
| (Options : String; |
| OK : out Boolean; |
| Err_Col : out Natural); |
| -- This procedure is called to set the style check options that correspond |
| -- to the characters in the given Options string. If all options are valid, |
| -- they are set in an additive manner: any previous options are retained |
| -- unless overridden, unless a minus is encountered, and then subsequent |
| -- style switches are subtracted from the current set. |
| -- |
| -- If all options given are valid, then OK is True, Err_Col is set to |
| -- Options'Last + 1, and Style_Msg_Buf/Style_Msg_Len are unchanged. |
| -- |
| -- If an invalid character is found, then OK is False on exit, and Err_Col |
| -- is the index in options of the bad character. In this case Style_Msg_Len |
| -- is set and Style_Msg_Buf (1 .. Style_Msg_Len) has a detailed message |
| -- describing the error. |
| |
| procedure Set_Style_Check_Options (Options : String); |
| -- Like the above procedure, but used when the Options string is known to |
| -- be valid. This is for example appropriate for calls where the string == |
| -- was obtained by Save_Style_Check_Options. |
| |
| procedure Reset_Style_Check_Options; |
| -- Sets all style check options to off |
| |
| subtype Style_Check_Options is String (1 .. 64); |
| -- Long enough string to hold all options from Save call below |
| |
| procedure Save_Style_Check_Options (Options : out Style_Check_Options); |
| -- Sets Options to represent current selection of options. This set can be |
| -- restored by first calling Reset_Style_Check_Options, and then calling |
| -- Set_Style_Check_Options with the Options string. |
| |
| end Stylesw; |