| dnl Copyright (C) 1994, 1995-8, 1999, 2001, 2002 Free Software Foundation, Inc. |
| dnl This file is free software; the Free Software Foundation |
| dnl gives unlimited permission to copy and/or distribute it, |
| dnl with or without modifications, as long as this notice is preserved. |
| |
| dnl This program is distributed in the hope that it will be useful, |
| dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| dnl PARTICULAR PURPOSE. |
| |
| dnl |
| dnl Initialize configure bits. |
| dnl |
| dnl GLIBCPP_TOPREL_CONFIGURE |
| AC_DEFUN(GLIBCPP_TOPREL_CONFIGURE, [ |
| dnl Default to --enable-multilib |
| AC_ARG_ENABLE(multilib, |
| [ --enable-multilib build hella library versions (default)], |
| [case "${enableval}" in |
| yes) multilib=yes ;; |
| no) multilib=no ;; |
| *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;; |
| esac], [multilib=yes])dnl |
| |
| # When building with srcdir == objdir, links to the source files will |
| # be created in directories within the target_subdir. We have to |
| # adjust toplevel_srcdir accordingly, so that configure finds |
| # install-sh and other auxiliary files that live in the top-level |
| # source directory. |
| if test "${srcdir}" = "."; then |
| if test -z "${with_target_subdir}"; then |
| toprel=".." |
| else |
| if test "${with_target_subdir}" != "."; then |
| toprel="${with_multisrctop}../.." |
| else |
| toprel="${with_multisrctop}.." |
| fi |
| fi |
| else |
| toprel=".." |
| fi |
| AC_CONFIG_AUX_DIR(${srcdir}/$toprel) |
| toplevel_srcdir=\${top_srcdir}/$toprel |
| AC_SUBST(toplevel_srcdir) |
| ]) |
| |
| dnl |
| dnl Initialize configure bits. |
| dnl |
| dnl GLIBCPP_CONFIGURE |
| AC_DEFUN(GLIBCPP_CONFIGURE, [ |
| # Export build and source directories. |
| # These need to be absolute paths, yet at the same time need to |
| # canonicalize only relative paths, because then amd will not unmount |
| # drives. Thus the use of PWDCMD: set it to 'pawd' or 'amq -w' if using amd. |
| glibcpp_builddir=`${PWDCMD-pwd}` |
| case $srcdir in |
| [\\/$]* | ?:[\\/]*) glibcpp_srcdir=${srcdir} ;; |
| *) glibcpp_srcdir=`cd "$srcdir" && ${PWDCMD-pwd} || echo "$srcdir"` ;; |
| esac |
| AC_SUBST(glibcpp_builddir) |
| AC_SUBST(glibcpp_srcdir) |
| |
| dnl This is here just to satisfy automake. |
| ifelse(not,equal,[AC_CONFIG_AUX_DIR(..)]) |
| |
| # Will set LN_S to either 'ln -s' or 'ln'. With autoconf 2.50+, can also |
| # be 'cp -p' if linking isn't available. |
| #ac_cv_prog_LN_S='cp -p' |
| AC_PROG_LN_S |
| |
| # We use these options to decide which functions to include. |
| AC_ARG_WITH(target-subdir, |
| [ --with-target-subdir=SUBDIR |
| configuring in a subdirectory]) |
| AC_ARG_WITH(cross-host, |
| [ --with-cross-host=HOST configuring with a cross compiler]) |
| |
| # Never versions of autoconf add an underscore to these functions. |
| # Prevent future problems ... |
| ifdef([AC_PROG_CC_G],[],[define([AC_PROG_CC_G],defn([_AC_PROG_CC_G]))]) |
| ifdef([AC_PROG_CC_GNU],[],[define([AC_PROG_CC_GNU],defn([_AC_PROG_CC_GNU]))]) |
| ifdef([AC_PROG_CXX_G],[],[define([AC_PROG_CXX_G],defn([_AC_PROG_CXX_G]))]) |
| ifdef([AC_PROG_CXX_GNU],[],[define([AC_PROG_CXX_GNU],defn([_AC_PROG_CXX_GNU]))]) |
| |
| # AC_PROG_CC |
| |
| # FIXME: We temporarily define our own version of AC_PROG_CC. This is |
| # copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We |
| # are probably using a cross compiler, which will not be able to fully |
| # link an executable. This should really be fixed in autoconf |
| # itself. |
| |
| AC_DEFUN(LIB_AC_PROG_CC, |
| [AC_BEFORE([$0], [AC_PROG_CPP])dnl |
| dnl Fool anybody using AC_PROG_CC. |
| AC_PROVIDE([AC_PROG_CC]) |
| AC_CHECK_PROG(CC, gcc, gcc) |
| if test -z "$CC"; then |
| AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc) |
| test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH]) |
| fi |
| |
| AC_PROG_CC_GNU |
| |
| if test $ac_cv_prog_gcc = yes; then |
| GCC=yes |
| dnl Check whether -g works, even if CFLAGS is set, in case the package |
| dnl plays around with CFLAGS (such as to build both debugging and |
| dnl normal versions of a library), tasteless as that idea is. |
| ac_test_CFLAGS="${CFLAGS+set}" |
| ac_save_CFLAGS="$CFLAGS" |
| CFLAGS= |
| AC_PROG_CC_G |
| if test "$ac_test_CFLAGS" = set; then |
| CFLAGS="$ac_save_CFLAGS" |
| elif test $ac_cv_prog_cc_g = yes; then |
| CFLAGS="-g -O2" |
| else |
| CFLAGS="-O2" |
| fi |
| else |
| GCC= |
| test "${CFLAGS+set}" = set || CFLAGS="-g" |
| fi |
| ]) |
| |
| LIB_AC_PROG_CC |
| |
| AC_CHECK_TOOL(AS, as) |
| AC_CHECK_TOOL(AR, ar) |
| AC_CHECK_TOOL(RANLIB, ranlib, ranlib-not-found-in-path-error) |
| AC_PROG_INSTALL |
| |
| # We need AC_EXEEXT to keep automake happy in cygnus mode. However, |
| # at least currently, we never actually build a program, so we never |
| # need to use $(EXEEXT). Moreover, the test for EXEEXT normally |
| # fails, because we are probably configuring with a cross compiler |
| # which can't create executables. So we include AC_EXEEXT to keep |
| # automake happy, but we don't execute it, since we don't care about |
| # the result. |
| if false; then |
| # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands |
| # to nothing, so nothing would remain between `then' and `fi' if it |
| # were not for the `:' below. |
| : |
| AC_EXEEXT |
| fi |
| ]) |
| |
| |
| dnl |
| dnl GLIBCPP_EXPORT_INSTALL_INFO |
| dnl calculates gxx_install_dir |
| dnl exports glibcpp_toolexecdir |
| dnl exports glibcpp_toolexeclibdir |
| dnl exports glibcpp_prefixdir |
| dnl |
| dnl Assumes cross_compiling bits already done, and with_cross_host in |
| dnl particular |
| dnl |
| dnl GLIBCPP_EXPORT_INSTALL_INFO |
| AC_DEFUN(GLIBCPP_EXPORT_INSTALL_INFO, [ |
| # Assumes glibcpp_builddir, glibcpp_srcdir are alreay set up and |
| # exported correctly in GLIBCPP_CONFIGURE. |
| glibcpp_toolexecdir=no |
| glibcpp_toolexeclibdir=no |
| glibcpp_prefixdir=${prefix} |
| |
| AC_MSG_CHECKING([for interface version number]) |
| libstdcxx_interface=$INTERFACE |
| AC_MSG_RESULT($libstdcxx_interface) |
| |
| # Process the option "--enable-version-specific-runtime-libs" |
| AC_MSG_CHECKING([for --enable-version-specific-runtime-libs]) |
| AC_ARG_ENABLE(version-specific-runtime-libs, |
| [ --enable-version-specific-runtime-libs Specify that runtime libraries should be installed in a compiler-specific directory ], |
| [case "$enableval" in |
| yes) version_specific_libs=yes ;; |
| no) version_specific_libs=no ;; |
| *) AC_MSG_ERROR([Unknown argument to enable/disable version-specific libs]);; |
| esac], |
| version_specific_libs=no)dnl |
| # Option set, now we can test it. |
| AC_MSG_RESULT($version_specific_libs) |
| |
| gcc_version_trigger=${toplevel_srcdir}/gcc/version.c |
| gcc_version_full=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/'` |
| gcc_version=`echo ${gcc_version_full} | sed -e 's/\([^ ]*\) .*/\1/'` |
| AC_SUBST(gcc_version) |
| AC_SUBST(gcc_version_trigger) |
| |
| if test $version_specific_libs = yes; then |
| # Need the gcc compiler version to know where to install libraries |
| # and header files if --enable-version-specific-runtime-libs option |
| # is selected. FIXME: "toolexecdir" is a misnomer, there are no |
| # executables installed there. |
| changequote(,)dnl |
| glibcpp_toolexecdir='$(libdir)/gcc/$(target_alias)' |
| glibcpp_toolexeclibdir='$(toolexecdir)/'${gcc_version}'$(MULTISUBDIR)' |
| changequote([,])dnl |
| fi |
| |
| # Calculate glibcpp_toolexecdir, glibcpp_toolexeclibdir |
| # Install a library built with a cross compiler in tooldir, not libdir. |
| if test x"$glibcpp_toolexecdir" = x"no"; then |
| if test -n "$with_cross_host" && |
| test x"$with_cross_host" != x"no"; then |
| glibcpp_toolexecdir='$(exec_prefix)/$(target_alias)' |
| glibcpp_toolexeclibdir='$(toolexecdir)/lib' |
| else |
| glibcpp_toolexecdir='$(libdir)/gcc/$(target_alias)' |
| glibcpp_toolexeclibdir='$(libdir)' |
| fi |
| multi_os_directory=`$CC -print-multi-os-directory` |
| case $multi_os_directory in |
| .) ;; # Avoid trailing /. |
| *) glibcpp_toolexeclibdir=$glibcpp_toolexeclibdir/$multi_os_directory ;; |
| esac |
| fi |
| |
| AC_SUBST(glibcpp_prefixdir) |
| AC_SUBST(glibcpp_toolexecdir) |
| AC_SUBST(glibcpp_toolexeclibdir) |
| ]) |
| |
| sinclude(../libtool.m4) |
| dnl The lines below arrange for aclocal not to bring an installed |
| dnl libtool.m4 into aclocal.m4, while still arranging for automake to |
| dnl add a definition of LIBTOOL to Makefile.in. |
| ifelse(,,,[AC_SUBST(LIBTOOL) |
| AC_DEFUN([AM_PROG_LIBTOOL]) |
| AC_DEFUN([AC_LIBTOOL_DLOPEN]) |
| AC_DEFUN([AC_PROG_LD]) |
| ]) |