libf2c/libF77/makefile.netlib

.SUFFIXES: .c .o
CC = cc
SHELL = /bin/sh
CFLAGS = -O

# If your system lacks onexit() and you are not using an
# ANSI C compiler, then you should add -DNO_ONEXIT to CFLAGS,
# e.g., by changing the above "CFLAGS =" line to
# CFLAGS = -O -DNO_ONEXIT

# On at least some Sun systems, it is more appropriate to change the
# "CFLAGS =" line to
# CFLAGS = -O -Donexit=on_exit

# compile, then strip unnecessary symbols
.c.o:
	$(CC) -c -DSkip_f2c_Undefs $(CFLAGS) $*.c
	ld -r -x -o $*.xxx $*.o
	mv $*.xxx $*.o
## Under Solaris (and other systems that do not understand ld -x),
## omit -x in the ld line above.
## If your system does not have the ld command, comment out
## or remove both the ld and mv lines above.

MISC =	F77_aloc.o Version.o main.o s_rnge.o abort_.o getarg_.o iargc_.o \
	getenv_.o signal_.o s_stop.o s_paus.o system_.o cabs.o\
	derf_.o derfc_.o erf_.o erfc_.o sig_die.o exit_.o
POW =	pow_ci.o pow_dd.o pow_di.o pow_hh.o pow_ii.o  pow_ri.o pow_zi.o pow_zz.o
CX =	c_abs.o c_cos.o c_div.o c_exp.o c_log.o c_sin.o c_sqrt.o
DCX =	z_abs.o z_cos.o z_div.o z_exp.o z_log.o z_sin.o z_sqrt.o
REAL =	r_abs.o r_acos.o r_asin.o r_atan.o r_atn2.o r_cnjg.o r_cos.o\
	r_cosh.o r_dim.o r_exp.o r_imag.o r_int.o\
	r_lg10.o r_log.o r_mod.o r_nint.o r_sign.o\
	r_sin.o r_sinh.o r_sqrt.o r_tan.o r_tanh.o
DBL =	d_abs.o d_acos.o d_asin.o d_atan.o d_atn2.o\
	d_cnjg.o d_cos.o d_cosh.o d_dim.o d_exp.o\
	d_imag.o d_int.o d_lg10.o d_log.o d_mod.o\
	d_nint.o d_prod.o d_sign.o d_sin.o d_sinh.o\
	d_sqrt.o d_tan.o d_tanh.o
INT =	i_abs.o i_dim.o i_dnnt.o i_indx.o i_len.o i_mod.o i_nint.o i_sign.o
HALF =	h_abs.o h_dim.o h_dnnt.o h_indx.o h_len.o h_mod.o  h_nint.o h_sign.o
CMP =	l_ge.o l_gt.o l_le.o l_lt.o hl_ge.o hl_gt.o hl_le.o hl_lt.o
EFL =	ef1asc_.o ef1cmc_.o
CHAR =	F77_aloc.o s_cat.o s_cmp.o s_copy.o
F90BIT = lbitbits.o lbitshft.o
QINT =	pow_qq.o qbitbits.o qbitshft.o
TIME =	dtime_.o etime_.o

all: signal1.h libF77.a

# You may need to adjust signal1.h suitably for your system...
signal1.h: signal1.h0
	cp signal1.h0 signal1.h

# If you get an error compiling dtime_.c or etime_.c, try adding
# -DUSE_CLOCK to the CFLAGS assignment above; if that does not work,
# omit $(TIME) from the dependency list for libF77.a below.

# For INTEGER*8 support (which requires system-dependent adjustments to
# f2c.h), add $(QINT) to the libf2c.a dependency list below...

libF77.a : $(MISC) $(POW) $(CX) $(DCX) $(REAL) $(DBL) $(INT) \
	$(HALF) $(CMP) $(EFL) $(CHAR) $(F90BIT) $(TIME)
	ar r libF77.a $?
	-ranlib libF77.a

### If your system lacks ranlib, you don't need it; see README.

Version.o: Version.c
	$(CC) -c Version.c

# To compile with C++, first "make f2c.h"
f2c.h: f2ch.add
	cat /usr/include/f2c.h f2ch.add >f2c.h

install:	libF77.a
	mv libF77.a /usr/lib
	ranlib /usr/lib/libF77.a

clean:
	rm -f libF77.a *.o

check:
	xsum F77_aloc.c Notice README Version.c abort_.c c_abs.c c_cos.c \
	c_div.c c_exp.c c_log.c c_sin.c c_sqrt.c cabs.c d_abs.c d_acos.c \
	d_asin.c d_atan.c d_atn2.c d_cnjg.c d_cos.c d_cosh.c d_dim.c \
	d_exp.c d_imag.c d_int.c d_lg10.c d_log.c d_mod.c d_nint.c \
	d_prod.c d_sign.c d_sin.c d_sinh.c d_sqrt.c d_tan.c d_tanh.c \
	derf_.c derfc_.c dtime_.c \
	ef1asc_.c ef1cmc_.c erf_.c erfc_.c etime_.c exit_.c f2ch.add \
	getarg_.c getenv_.c h_abs.c h_dim.c h_dnnt.c h_indx.c h_len.c \
	h_mod.c h_nint.c h_sign.c hl_ge.c hl_gt.c hl_le.c hl_lt.c \
	i_abs.c i_dim.c i_dnnt.c i_indx.c i_len.c i_mod.c i_nint.c \
	i_sign.c iargc_.c l_ge.c l_gt.c l_le.c l_lt.c lbitbits.c lbitshft.c \
	main.c makefile pow_ci.c pow_dd.c pow_di.c pow_hh.c pow_ii.c \
	pow_qq.c pow_ri.c pow_zi.c pow_zz.c qbitbits.c qbitshft.c \
	r_abs.c r_acos.c r_asin.c r_atan.c r_atn2.c \
	r_cnjg.c r_cos.c r_cosh.c r_dim.c r_exp.c r_imag.c r_int.c r_lg10.c \
	r_log.c r_mod.c r_nint.c r_sign.c r_sin.c r_sinh.c r_sqrt.c \
	r_tan.c r_tanh.c s_cat.c s_cmp.c s_copy.c \
	s_paus.c s_rnge.c s_stop.c sig_die.c signal1.h0 signal_.c system_.c \
	z_abs.c z_cos.c z_div.c z_exp.c z_log.c z_sin.c z_sqrt.c >zap
	cmp zap libF77.xsum && rm zap || diff libF77.xsum zap