libcpp/po/zh_TW.po

# Traditional Chinese translation for cpplib.
# Copyright (C) 2005 Free Software Foundation, Inc.
# This file is distributed under the same license as the gcc package.
# Meng Jie <zuxyhere@eastday.com>, 2005.
# Wei-Lun Chao <bluebat@member.fsf.org>, 2006, 2013, 2015.
# Yi-Jyun Pan <pan93412@gmail.com>, 2020.
#
msgid ""
msgstr ""
"Project-Id-Version: cpplib 12.1-b20220213\n"
"Report-Msgid-Bugs-To: https://gcc.gnu.org/bugs/\n"
"POT-Creation-Date: 2026-02-19 21:05+0000\n"
"PO-Revision-Date: 2022-02-16 00:36+0800\n"
"Last-Translator: Yi-Jyun Pan <pan93412@gmail.com>\n"
"Language-Team: Chinese (traditional) <zh-l10n@lists.linux.org.tw>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"X-Generator: Poedit 3.0.1\n"

#: charset.cc:759
#, gcc-internal-format, gfc-internal-format
msgid "conversion from %s to %s not supported by iconv"
msgstr "iconv 不支援從 %s 到 %s 的轉換"

#: charset.cc:762
msgid "iconv_open"
msgstr "iconv_open"

#: charset.cc:772
#, gcc-internal-format, gfc-internal-format
msgid "no iconv implementation, cannot convert from %s to %s"
msgstr "沒有實作 iconv，無法從 %s 轉換到 %s"

#: charset.cc:874
#, fuzzy, gcc-internal-format
#| msgid "character 0x%lx is not in the basic source character set\n"
msgid "character 0x%lx is not in the basic source character set"
msgstr "字元 0x%lx 不在基本來源字元集中\n"

#: charset.cc:891 charset.cc:2643
msgid "converting to execution character set"
msgstr "轉換到可執行檔案的字元集"

#: charset.cc:897
#, gcc-internal-format
msgid "character 0x%lx is not unibyte in execution character set"
msgstr "字元 0x%lx 在執行字元集中不是單位元組的"

#: charset.cc:1553
msgid "universal character names are only valid in C++ and C99"
msgstr "萬國碼字元名稱只在 C++ 和 C99 中有效"

#: charset.cc:1557
#, fuzzy, gcc-internal-format
#| msgid "C99's universal character names are incompatible with C90"
msgid "C99%'s universal character names are incompatible with C90"
msgstr "C99 的萬國碼字元名稱與 C90 不相容"

#: charset.cc:1560
#, fuzzy, gcc-internal-format
#| msgid "the meaning of '\\%c' is different in traditional C"
msgid "the meaning of %<\\%c%> is different in traditional C"
msgstr "「\\%c」的意義與在傳統 C 中不同"

#: charset.cc:1599
#, gcc-internal-format
msgid "%<\\N%> not followed by %<{%>"
msgstr ""

#: charset.cc:1629
msgid "empty named universal character escape sequence; treating it as separate tokens"
msgstr ""

#: charset.cc:1636
#, fuzzy
#| msgid "incomplete universal character name %.*s"
msgid "empty named universal character escape sequence"
msgstr "不完整的萬國碼字元名稱 %.*s"

#: charset.cc:1643
#, fuzzy
#| msgid "universal character names are only valid in C++ and C99"
msgid "named universal character escapes are only valid in C++23"
msgstr "萬國碼字元名稱只在 C++ 和 C99 中有效"

#: charset.cc:1663
#, fuzzy, gcc-internal-format
#| msgid "%.*s is not a valid universal character"
msgid "%<\\N{%.*s}%> is not a valid universal character; treating it as separate tokens"
msgstr "%.*s 不是一個有效的萬國碼字元"

#: charset.cc:1669
#, fuzzy, gcc-internal-format
#| msgid "%.*s is not a valid universal character"
msgid "%<\\N{%.*s}%> is not a valid universal character"
msgstr "%.*s 不是一個有效的萬國碼字元"

#: charset.cc:1679
#, gcc-internal-format
msgid "did you mean %<\\N{%s}%>?"
msgstr ""

#: charset.cc:1697
#, gcc-internal-format
msgid "%<\\N{%> not terminated with %<}%> after %.*s; treating it as separate tokens"
msgstr ""

#: charset.cc:1706
#, gcc-internal-format
msgid "%<\\N{%> not terminated with %<}%> after %.*s"
msgstr ""

#: charset.cc:1714
#, fuzzy, gcc-internal-format
#| msgid "In _cpp_valid_ucn but not a UCN"
msgid "in %<_cpp_valid_ucn%> but not a UCN"
msgstr "在 _cpp_valid_ucn 中並不是一個 UCN"

#: charset.cc:1757
msgid "empty delimited escape sequence; treating it as separate tokens"
msgstr ""

#: charset.cc:1764 charset.cc:2167 charset.cc:2284
msgid "empty delimited escape sequence"
msgstr ""

#: charset.cc:1773 charset.cc:2176 charset.cc:2293
#, fuzzy
#| msgid "universal character names are only valid in C++ and C99"
msgid "delimited escape sequences are only valid in C++23"
msgstr "萬國碼字元名稱只在 C++ 和 C99 中有效"

#: charset.cc:1778 charset.cc:1783 charset.cc:2181 charset.cc:2186
#: charset.cc:2298 charset.cc:2303
msgid "delimited escape sequences are only valid in C2Y"
msgstr ""

#: charset.cc:1798
#, gcc-internal-format
msgid "%<\\u{%> not terminated with %<}%> after %.*s; treating it as separate tokens"
msgstr ""

#: charset.cc:1810
#, gcc-internal-format
msgid "incomplete universal character name %.*s"
msgstr "不完整的萬國碼字元名稱 %.*s"

#: charset.cc:1814
#, gcc-internal-format
msgid "%<\\u{%> not terminated with %<}%> after %.*s"
msgstr ""

#: charset.cc:1822
#, gcc-internal-format
msgid "%.*s is not a valid universal character"
msgstr "%.*s 不是一個有效的萬國碼字元"

#: charset.cc:1838 charset.cc:1842
#, fuzzy, gcc-internal-format
#| msgid "%.*s is not a valid universal character"
msgid "%.*s is not a valid universal character name before C23"
msgstr "%.*s 不是一個有效的萬國碼字元"

#: charset.cc:1858 lex.cc:2099
#, fuzzy, gcc-internal-format
#| msgid "'$' in identifier or number"
msgid "%<$%> in identifier or number"
msgstr "「$」出現在識別字或數字中"

#: charset.cc:1868
#, gcc-internal-format
msgid "universal character %.*s is not valid in an identifier"
msgstr "萬國碼字元 %.*s 在識別字中無效"

#: charset.cc:1872
#, gcc-internal-format
msgid "universal character %.*s is not valid at the start of an identifier"
msgstr "萬國碼字元 %.*s 在識別字開頭無效"

#: charset.cc:1879
#, gcc-internal-format
msgid "%.*s is outside the UCS codespace"
msgstr "%.*s 在 UCS 代碼空間外"

#: charset.cc:1923 charset.cc:3180
msgid "converting UCN to source character set"
msgstr "將 UCN 轉換到來源字元集"

#: charset.cc:1930
msgid "converting UCN to execution character set"
msgstr "將 UCN 轉換到執行字元集"

#: charset.cc:1994
#, gcc-internal-format
msgid "extended character %.*s is not valid in an identifier"
msgstr "延伸字元 %.*s 在識別字中無效"

#: charset.cc:2011
#, gcc-internal-format
msgid "extended character %.*s is not valid at the start of an identifier"
msgstr "延伸字元 %.*s 在識別字開頭無效"

#: charset.cc:2133
#, fuzzy, gcc-internal-format
#| msgid "the meaning of '\\x' is different in traditional C"
msgid "the meaning of %<\\x%> is different in traditional C"
msgstr "「\\x」的意義與在傳統 C 中不同"

#: charset.cc:2194
#, fuzzy, gcc-internal-format
#| msgid "\\x used with no following hex digits"
msgid "%<\\x%> used with no following hex digits"
msgstr "\\x 後沒有十六進位數字"

#: charset.cc:2200
#, gcc-internal-format
msgid "%<\\x{%> not terminated with %<}%> after %.*s"
msgstr ""

#: charset.cc:2208
msgid "hex escape sequence out of range"
msgstr "十六進位逸出序列越界"

#: charset.cc:2251
#, gcc-internal-format
msgid "%<\\o%> not followed by %<{%>"
msgstr ""

#: charset.cc:2309
#, gcc-internal-format
msgid "%<\\o{%> not terminated with %<}%> after %.*s"
msgstr ""

#: charset.cc:2318
msgid "octal escape sequence out of range"
msgstr "八進位逸出序列越界"

#: charset.cc:2370 charset.cc:2380
#, gcc-internal-format
msgid "numeric escape sequence in unevaluated string: %<\\%c%>"
msgstr ""

#: charset.cc:2408
#, fuzzy, gcc-internal-format
#| msgid "the meaning of '\\a' is different in traditional C"
msgid "the meaning of %<\\a%> is different in traditional C"
msgstr "「\\a」的意義與在傳統 C 中不同"

#: charset.cc:2414
#, fuzzy, gcc-internal-format
#| msgid "non-ISO-standard escape sequence, '\\%c'"
msgid "non-ISO-standard escape sequence, %<\\%c%>"
msgstr "非 ISO 標準的逸出序列，「\\%c」"

#: charset.cc:2422
#, fuzzy, gcc-internal-format
#| msgid "unknown escape sequence: '\\%c'"
msgid "unknown escape sequence: %<\\%c%>"
msgstr "不明的逸出序列：『\\%c』"

#: charset.cc:2432
#, fuzzy, gcc-internal-format
#| msgid "unknown escape sequence: '\\%s'"
msgid "unknown escape sequence: %<\\%s%>"
msgstr "不明的逸出序列：「\\%s」"

#: charset.cc:2440
msgid "converting escape sequence to execution character set"
msgstr "將逸出序列轉換到執行字元集"

#: charset.cc:2580
msgid "missing open quote"
msgstr "遺失左引號"

#: charset.cc:2915
#, fuzzy
#| msgid "character 0x%lx is not unibyte in execution character set"
msgid "character not encodable in a single execution character code unit"
msgstr "字元 0x%lx 在執行字元集中不是單位元組的"

#: charset.cc:2920
msgid "at least one character in a multi-character literal not encodable in a single execution character code unit"
msgstr ""

#: charset.cc:2938
#, gcc-internal-format
msgid "multi-character literal with %ld characters exceeds %<int%> size of %ld bytes"
msgstr ""

#: charset.cc:2942 charset.cc:3037
msgid "multi-character literal cannot have an encoding prefix"
msgstr ""

#: charset.cc:2945 charset.cc:3040
msgid "character not encodable in a single code unit"
msgstr ""

#: charset.cc:2949
msgid "multi-character character constant"
msgstr "多位元組字元常數"

#: charset.cc:3081
msgid "empty character constant"
msgstr "空的字元常數"

#: charset.cc:3266
#, gcc-internal-format, gfc-internal-format
msgid "failure to convert %s to %s"
msgstr "無法從 %s 轉換到 %s"

#: directives.cc:243
#, fuzzy, gcc-internal-format
#| msgid "extra tokens at end of #%s directive"
msgid "extra tokens at end of %<#%s%> directive"
msgstr "#%s 指令的末尾有多餘的符記"

#: directives.cc:286
#, gcc-internal-format, gfc-internal-format
msgid "extra tokens at end of #%s directive"
msgstr "#%s 指令的末尾有多餘的符記"

#: directives.cc:396
#, fuzzy, gcc-internal-format
#| msgid "#%s is a GCC extension"
msgid "%<#%s%> is a GCC extension"
msgstr "#%s 是 GCC 擴充功能"

#: directives.cc:404 directives.cc:2716 directives.cc:2755
#, fuzzy, gcc-internal-format
#| msgid "#%s before C++23 is a GCC extension"
msgid "%<#%s%> before C++23 is a GCC extension"
msgstr "C++23 之前的 #%s 是 GCC 擴充功能"

#: directives.cc:409 directives.cc:415 directives.cc:1404 directives.cc:2720
#: directives.cc:2760
#, fuzzy, gcc-internal-format
#| msgid "#%s before C++23 is a GCC extension"
msgid "%<#%s%> before C23 is a GCC extension"
msgstr "C++23 之前的 #%s 是 GCC 擴充功能"

#: directives.cc:423
#, fuzzy, gcc-internal-format
#| msgid "#%s is a deprecated GCC extension"
msgid "%<#%s%> is a deprecated GCC extension"
msgstr "#%s 是不宜再用的 GCC 擴充功能"

#: directives.cc:436
#, fuzzy, gcc-internal-format
#| msgid "suggest not using #elif in traditional C"
msgid "suggest not using %<#elif%> in traditional C"
msgstr "建議在傳統 C 中不要使用 #elif"

#: directives.cc:439
#, fuzzy, gcc-internal-format
#| msgid "traditional C ignores #%s with the # indented"
msgid "traditional C ignores %<#%s%> with the %<#%> indented"
msgstr "當 # 有縮排時傳統 C 忽略 #%s"

#: directives.cc:443
#, fuzzy, gcc-internal-format
#| msgid "suggest hiding #%s from traditional C with an indented #"
msgid "suggest hiding %<#%s%> from traditional C with an indented %<#%>"
msgstr "建議使用縮排的 # 以讓 #%s 對傳統 C 不可見"

#: directives.cc:468
msgid "embedding a directive within macro arguments is not portable"
msgstr "將一個指令內嵌於巨集參數中是不可移植的"

#: directives.cc:497
msgid "style of line directive is a GCC extension"
msgstr "line 指令的風格是 GCC 擴充功能"

#: directives.cc:572
#, gcc-internal-format, gfc-internal-format
msgid "invalid preprocessing directive #%s; did you mean #%s?"
msgstr "無效的預處理指令 #%s；您是指 #%s 嗎？"

#: directives.cc:578
#, gcc-internal-format, gfc-internal-format
msgid "invalid preprocessing directive #%s"
msgstr "無效的預先處理指令 #%s"

#: directives.cc:656
#, fuzzy, gcc-internal-format
#| msgid "\"%s\" cannot be used as a macro name"
msgid "%qs cannot be used as a macro name"
msgstr "「%s」不能用作巨集名稱"

#: directives.cc:663
#, fuzzy, gcc-internal-format
#| msgid "\"%s\" cannot be used as a macro name as it is an operator in C++"
msgid "%qs cannot be used as a macro name as it is an operator in C++"
msgstr "「%s」不能做為巨集名，因為它是 C++ 中的一個運算子"

#: directives.cc:666
#, fuzzy, gcc-internal-format
#| msgid "no macro name given in #%s directive"
msgid "no macro name given in %<#%s%> directive"
msgstr "#%s 指令中未給出巨集名"

#: directives.cc:669
msgid "macro names must be identifiers"
msgstr "巨集名必須是識別字"

#: directives.cc:752 directives.cc:755
#, fuzzy, gcc-internal-format
#| msgid "undefining \"%s\""
msgid "undefining keyword %qs"
msgstr "取消對「%s」的定義"

#: directives.cc:767 directives.cc:772 directives.cc:784
#, fuzzy, gcc-internal-format
#| msgid "undefining \"%s\""
msgid "undefining %qs"
msgstr "取消對「%s」的定義"

#: directives.cc:835
#, fuzzy, gcc-internal-format
#| msgid "missing terminating > character"
msgid "missing terminating %<>%> character"
msgstr "缺少結尾的 > 字元"

#: directives.cc:895
#, fuzzy, gcc-internal-format
#| msgid "#%s expects \"FILENAME\" or <FILENAME>"
msgid "%<#%s%> expects %<\"FILENAME\"%> or %<<FILENAME>%>"
msgstr "#%s 需要 \"FILENAME\" 或 <FILENAME>"

#: directives.cc:941 directives.cc:1421
#, gcc-internal-format, gfc-internal-format
msgid "empty filename in #%s"
msgstr "#%s 中檔案名稱為空"

#: directives.cc:950
#, fuzzy, gcc-internal-format
#| msgid "#include nested depth %u exceeds maximum of %u (use -fmax-include-depth=DEPTH to increase the maximum)"
msgid "%<#include%> nested depth %u exceeds maximum of %u (use %<-fmax-include-depth=DEPTH%> to increase the maximum)"
msgstr "#include 巢狀深度 %u 超過最大值 %u (使用 -fmax-include-depth=深度 增加最大值)"

#: directives.cc:995
#, fuzzy, gcc-internal-format
#| msgid "#include_next in primary source file"
msgid "%<#include_next%> in primary source file"
msgstr "#include_next 出現在主來源檔案中"

#: directives.cc:1067 directives.cc:1089 directives.cc:1092 directives.cc:1095
#, fuzzy, gcc-internal-format, gfc-internal-format
#| msgid "unbalanced stack in %s"
msgid "unbalanced '%c'"
msgstr "%s 中的堆疊不平衡"

#: directives.cc:1150 directives.cc:1341
#, gcc-internal-format
msgid "expected %<)%>"
msgstr ""

#: directives.cc:1156 directives.cc:1207
#, fuzzy
#| msgid "expected parameter name, found \"%s\""
msgid "expected parameter name"
msgstr "原先期望參數名稱，卻找到「%s」"

#: directives.cc:1167
#, gcc-internal-format
msgid "%<gnu::base64%> parameter conflicts with %<limit%> or %<gnu::offset%> parameters"
msgstr ""

#: directives.cc:1177
#, gcc-internal-format
msgid "%<gnu::base64%> parameter required in preprocessed source"
msgstr ""

#: directives.cc:1198
#, gcc-internal-format
msgid "expected %<:%>"
msgstr ""

#: directives.cc:1265
#, fuzzy, gcc-internal-format
#| msgid "duplicate macro parameter \"%s\""
msgid "duplicate embed parameter '%.*s%s%.*s'"
msgstr "重複的巨集參數「%s」"

#: directives.cc:1277
#, gcc-internal-format
msgid "unknown embed parameter '%.*s%s%.*s'"
msgstr ""

#: directives.cc:1286
#, gcc-internal-format
msgid "expected %<(%>"
msgstr ""

#: directives.cc:1299
#, gcc-internal-format
msgid "too large %<gnu::offset%> argument"
msgstr ""

#: directives.cc:1346
#, fuzzy
#| msgid "null character(s) preserved in literal"
msgid "expected character string literal"
msgstr "空字元將保留在原文中"

#: directives.cc:1391
#, fuzzy, gcc-internal-format
#| msgid "suggest not using #elif in traditional C"
msgid "%<#embed%> not supported in traditional C"
msgstr "建議在傳統 C 中不要使用 #elif"

#: directives.cc:1400
#, fuzzy, gcc-internal-format
#| msgid "#%s before C++23 is a GCC extension"
msgid "%<#%s%> before C++26 is a GCC extension"
msgstr "C++23 之前的 #%s 是 GCC 擴充功能"

#: directives.cc:1409
#, fuzzy, gcc-internal-format
#| msgid "#%s is a GCC extension"
msgid "%<#%s%> is a C23 feature"
msgstr "#%s 是 GCC 擴充功能"

#: directives.cc:1466
#, fuzzy, gcc-internal-format
#| msgid "invalid flag \"%s\" in line directive"
msgid "invalid flag %qs in line directive"
msgstr "line 指令中有無效的標記「%s」"

#: directives.cc:1534
#, fuzzy, gcc-internal-format
#| msgid "unexpected end of file after #line"
msgid "unexpected end of file after %<#line%>"
msgstr "#line 之後未預期的檔案結束"

#: directives.cc:1537
#, fuzzy, gcc-internal-format
#| msgid "\"%s\" after #line is not a positive integer"
msgid "%qs after %<#line%> is not a positive integer"
msgstr "#line 後的「%s」不是一個正整數"

#: directives.cc:1543 directives.cc:1546
msgid "line number out of range"
msgstr "列號超出範圍"

#: directives.cc:1559 directives.cc:1640
#, fuzzy, gcc-internal-format
#| msgid "\"%s\" is not a valid filename"
msgid "%qs is not a valid filename"
msgstr "「%s」不是一個有效的檔案名稱"

#: directives.cc:1600
#, fuzzy, gcc-internal-format
#| msgid "\"%s\" after # is not a positive integer"
msgid "%qs after %<#%> is not a positive integer"
msgstr "# 後的「%s」不是一個正整數"

#: directives.cc:1667
#, fuzzy, gcc-internal-format
#| msgid "file \"%s\" linemarker ignored due to incorrect nesting"
msgid "file %qs linemarker ignored due to incorrect nesting"
msgstr "因為巢狀項目不正確，因此忽略了「%s」檔案的行標記 (linemarker)"

#: directives.cc:1745 directives.cc:1747 directives.cc:1749 directives.cc:2356
#, gcc-internal-format, gfc-internal-format
msgid "%s"
msgstr "%s"

#: directives.cc:1773
#, gcc-internal-format, gfc-internal-format
msgid "invalid #%s directive"
msgstr "無效的 #%s 指令"

#: directives.cc:1836
#, fuzzy, gcc-internal-format
#| msgid "registering pragmas in namespace \"%s\" with mismatched name expansion"
msgid "registering pragmas in namespace %qs with mismatched name expansion"
msgstr "以不匹配的名稱擴展去註冊命名空間「%s」中的編譯指示"

#: directives.cc:1845
#, fuzzy, gcc-internal-format
#| msgid "registering pragma \"%s\" with name expansion and no namespace"
msgid "registering pragma %qs with name expansion and no namespace"
msgstr "以名稱擴展以及無命名空間去註冊編譯指示「%s」"

#: directives.cc:1863
#, fuzzy, gcc-internal-format
#| msgid "registering \"%s\" as both a pragma and a pragma namespace"
msgid "registering %qs as both a pragma and a pragma namespace"
msgstr "「%s」既被註冊為一個編譯指示又被註冊為一個編譯指示命名空間"

#: directives.cc:1866
#, fuzzy, gcc-internal-format
#| msgid "#pragma %s %s is already registered"
msgid "%<#pragma %s %s%> is already registered"
msgstr "#pragma %s %s 已經被註冊"

#: directives.cc:1869
#, fuzzy, gcc-internal-format
#| msgid "#pragma %s is already registered"
msgid "%<#pragma %s%> is already registered"
msgstr "#pragma %s 已經被註冊"

#: directives.cc:1900
msgid "registering pragma with NULL handler"
msgstr "以空值處理常式去註冊編譯指示"

#: directives.cc:2118
#, fuzzy, gcc-internal-format
#| msgid "#pragma once in main file"
msgid "%<#pragma once%> in main file"
msgstr "#pragma 出現在主檔案中一次"

#: directives.cc:2188
#, fuzzy, gcc-internal-format
#| msgid "invalid #pragma push_macro directive"
msgid "invalid %<#pragma %s_macro%> directive"
msgstr "無效的 #pragma push_macro 指令"

#: directives.cc:2267
#, fuzzy, gcc-internal-format
#| msgid "invalid #pragma GCC poison directive"
msgid "invalid %<#pragma GCC poison%> directive"
msgstr "無效的 #pragma GCC poison 指令"

#: directives.cc:2276
#, fuzzy, gcc-internal-format
#| msgid "poisoning existing macro \"%s\""
msgid "poisoning existing macro %qs"
msgstr "對已存在的巨集「%s」加料"

#: directives.cc:2298
#, fuzzy, gcc-internal-format
#| msgid "#pragma system_header ignored outside include file"
msgid "%<#pragma system_header%> ignored outside include file"
msgstr "#pragma system_header 在包含檔案外被忽略"

#: directives.cc:2323
#, gcc-internal-format, gfc-internal-format
msgid "cannot find source file %s"
msgstr "找不到來源檔案 %s"

#: directives.cc:2327
#, gcc-internal-format, gfc-internal-format
msgid "current file is older than %s"
msgstr "目前檔案早於 %s"

#: directives.cc:2351
#, fuzzy, gcc-internal-format
#| msgid "invalid \"#pragma GCC %s\" directive"
msgid "invalid %<#pragma GCC %s%> directive"
msgstr "無效的 #pragma GCC %s 指令"

#: directives.cc:2571
#, fuzzy, gcc-internal-format
#| msgid "_Pragma takes a parenthesized string literal"
msgid "%<_Pragma%> takes a parenthesized string literal"
msgstr "_Pragma 需要一個括起的字串原文"

#: directives.cc:2654
#, fuzzy, gcc-internal-format
#| msgid "#else without #if"
msgid "%<#else%> without %<#if%>"
msgstr "#else 沒有匹配的 #if"

#: directives.cc:2659
#, fuzzy, gcc-internal-format
#| msgid "#else after #else"
msgid "%<#else%> after %<#else%>"
msgstr "#else 出現在 #else 後"

#: directives.cc:2661 directives.cc:2696
msgid "the conditional began here"
msgstr "條件自此開始"

#: directives.cc:2687
#, fuzzy, gcc-internal-format
#| msgid "#%s without #if"
msgid "%<#%s%> without %<#if%>"
msgstr "#%s 缺少 #if"

#: directives.cc:2693
#, fuzzy, gcc-internal-format
#| msgid "#%s after #else"
msgid "%<#%s%> after %<#else%>"
msgstr "#%s 在 #else 後"

#: directives.cc:2797
#, fuzzy, gcc-internal-format
#| msgid "#endif without #if"
msgid "%<#endif%> without %<#if%>"
msgstr "#endif 沒有匹配的 #if"

#: directives.cc:2882
#, fuzzy, gcc-internal-format
#| msgid "missing '(' after predicate"
msgid "missing %<(%> after predicate"
msgstr "述語後缺少「(」"

#: directives.cc:2900
#, fuzzy, gcc-internal-format
#| msgid "missing ')' to complete answer"
msgid "missing %<)%> to complete answer"
msgstr "完整的答案缺少「)」"

#: directives.cc:2912
#, fuzzy, gcc-internal-format
#| msgid "predicate's answer is empty"
msgid "predicate%'s answer is empty"
msgstr "述語的答案為空"

#: directives.cc:2942
msgid "assertion without predicate"
msgstr "判定語後沒有述語"

#: directives.cc:2945
msgid "predicate must be an identifier"
msgstr "述語必須是一個識別字"

#: directives.cc:3027
#, fuzzy, gcc-internal-format
#| msgid "\"%s\" re-asserted"
msgid "%qs re-asserted"
msgstr "已再判定「%s」"

#: directives.cc:3341
#, gcc-internal-format, gfc-internal-format
msgid "unterminated #%s"
msgstr "未終止的 #%s"

#: errors.cc:353 errors.cc:368
#, gcc-internal-format, gfc-internal-format
msgid "%s: %s"
msgstr "%s：%s"

#: errors.cc:366
msgid "stdout"
msgstr "stdout"

#: expr.cc:694 expr.cc:822
msgid "fixed-point constants are a GCC extension"
msgstr "定點常數是一個 GCC 擴充功能"

#: expr.cc:721
#, fuzzy, gcc-internal-format
#| msgid "invalid prefix \"0b\" for floating constant"
msgid "invalid prefix %<0b%> for floating constant"
msgstr "無效的浮點常數前綴「0b」"

#: expr.cc:727
#, fuzzy, gcc-internal-format
#| msgid "invalid prefix \"0b\" for floating constant"
msgid "invalid prefix %<0o%> for floating constant"
msgstr "無效的浮點常數前綴「0b」"

#: expr.cc:740
msgid "use of C++17 hexadecimal floating constant"
msgstr "使用 C++17 式的十六進位浮點常數"

#: expr.cc:744
msgid "use of C99 hexadecimal floating constant"
msgstr "使用 C99 式的十六進位浮點常數"

#: expr.cc:789
#, fuzzy, gcc-internal-format
#| msgid "invalid suffix \"%.*s\" on floating constant"
msgid "invalid suffix %<%.*s%> on floating constant"
msgstr "浮點常數的「%.*s」字尾無效"

#: expr.cc:800 expr.cc:870
#, fuzzy, gcc-internal-format
#| msgid "traditional C rejects the \"%.*s\" suffix"
msgid "traditional C rejects the %<%.*s%> suffix"
msgstr "傳統 C 不接受「%.*s」字尾"

#: expr.cc:809
msgid "suffix for double constant is a GCC extension"
msgstr "雙倍精度常數字尾是 GCC 的擴充功能"

#: expr.cc:815
#, fuzzy, gcc-internal-format
#| msgid "invalid suffix \"%.*s\" with hexadecimal floating constant"
msgid "invalid suffix %<%.*s%> with hexadecimal floating constant"
msgstr "無效的十六進位浮點常數字尾「%.*s」"

#: expr.cc:829 expr.cc:833
#, fuzzy
#| msgid "decimal float constants are a C2X feature"
msgid "decimal floating constants are a C23 feature"
msgstr "十進位浮點數常數是 C2X 的擴充功能"

#: expr.cc:853
#, fuzzy, gcc-internal-format
#| msgid "invalid suffix \"%.*s\" on integer constant"
msgid "invalid suffix %<%.*s%> on integer constant"
msgstr "整數常數的「%.*s」字尾無效"

#: expr.cc:878
msgid "use of C++11 long long integer constant"
msgstr "使用 C++11 long long 整數常數"

#: expr.cc:879
msgid "use of C99 long long integer constant"
msgstr "使用 C99 long long 整數常數"

#: expr.cc:894
#, gcc-internal-format
msgid "use of C++23 %<size_t%> integer constant"
msgstr "使用 C++23 %<size_t%> 整數常數"

#: expr.cc:895
#, gcc-internal-format
msgid "use of C++23 %<make_signed_t<size_t>%> integer constant"
msgstr "使用 C++23 %<make_signed_t<size_t>%> 整數常數"

#: expr.cc:905 expr.cc:916
#, gcc-internal-format
msgid "ISO C does not support literal %<wb%> suffixes before C23"
msgstr ""

#: expr.cc:931
msgid "imaginary constants are a GCC extension"
msgstr "虛數常數是 GCC 的擴充功能"

#: expr.cc:939
#, fuzzy
#| msgid "binary constants are a C2X feature or GCC extension"
msgid "imaginary constants are a C2Y feature or GCC extension"
msgstr "二進位常數是 C2X 提供的或 GCC 擴充的功能"

#: expr.cc:944
#, fuzzy
#| msgid "binary constants are a C2X feature"
msgid "imaginary constants are a C2Y feature"
msgstr "二進位常數是 C2X 功能"

#: expr.cc:956
msgid "binary constants are a C++14 feature or GCC extension"
msgstr "二進位常數是 C++14 特色或 GCC 的擴充功能"

#: expr.cc:961
#, fuzzy
#| msgid "binary constants are a C2X feature or GCC extension"
msgid "binary constants are a C23 feature or GCC extension"
msgstr "二進位常數是 C2X 提供的或 GCC 擴充的功能"

#: expr.cc:966
#, fuzzy
#| msgid "binary constants are a C2X feature"
msgid "binary constants are a C23 feature"
msgstr "二進位常數是 C2X 功能"

#: expr.cc:974
#, fuzzy, gcc-internal-format
#| msgid "binary constants are a C2X feature or GCC extension"
msgid "%<0o%> prefixed constants are a C2Y feature or GCC extension"
msgstr "二進位常數是 C2X 提供的或 GCC 擴充的功能"

#: expr.cc:979
#, fuzzy, gcc-internal-format
#| msgid "binary constants are a C2X feature"
msgid "%<0o%> prefixed constants are a C2Y feature"
msgstr "二進位常數是 C2X 功能"

#: expr.cc:1077
msgid "integer constant is too large for its type"
msgstr "整數常數值超出其類型"

#: expr.cc:1108
msgid "integer constant is so large that it is unsigned"
msgstr "整數常數太大，認定為 unsigned"

#: expr.cc:1189
#, gcc-internal-format
msgid "%<defined%> in %<#embed%> parameter"
msgstr ""

#: expr.cc:1206
#, fuzzy, gcc-internal-format
#| msgid "missing ')' after \"defined\""
msgid "missing %<)%> after %<defined%>"
msgstr "「defined」 後缺少「)」"

#: expr.cc:1213
#, fuzzy, gcc-internal-format
#| msgid "operator \"defined\" requires an identifier"
msgid "operator %<defined%> requires an identifier"
msgstr "運算子「defined」需要一個識別字"

#: expr.cc:1221
#, fuzzy, gcc-internal-format
#| msgid "(\"%s\" is an alternative token for \"%s\" in C++)"
msgid "(%qs is an alternative token for %qs in C++)"
msgstr "(在 C++ 中「%s」會是「%s」的替代識別字)"

#: expr.cc:1234
#, fuzzy, gcc-internal-format
#| msgid "this use of \"defined\" may not be portable"
msgid "this use of %<defined%> may not be portable"
msgstr "使用「defined」可能不利於移植"

#: expr.cc:1279
msgid "user-defined literal in preprocessor expression"
msgstr "在前置處理器運算式中有使用者定義的實字"

#: expr.cc:1284
msgid "floating constant in preprocessor expression"
msgstr "浮點常數出現在預先處理運算式中"

#: expr.cc:1290
msgid "imaginary number in preprocessor expression"
msgstr "預先處理運算式中出現虛數"

#: expr.cc:1339
#, fuzzy, gcc-internal-format
#| msgid "\"%s\" is not defined, evaluates to 0"
msgid "%qs is not defined, evaluates to %<0%>"
msgstr "「%s」未定義，判斷值為 0"

#: expr.cc:1351
msgid "assertions are a GCC extension"
msgstr "assertions 是 GCC 的擴充功能"

#: expr.cc:1355
msgid "assertions are a deprecated extension"
msgstr "assertions 是不宜再用的擴充功能"

#: expr.cc:1629
#, gcc-internal-format, gfc-internal-format
msgid "unbalanced stack in %s"
msgstr "%s 中的堆疊不平衡"

#: expr.cc:1643
msgid "negative embed parameter operand"
msgstr ""

#: expr.cc:1649
msgid "too large embed parameter operand"
msgstr ""

#: expr.cc:1668
#, gcc-internal-format, gfc-internal-format
msgid "impossible operator '%u'"
msgstr "不可能的運算子「%u」"

#: expr.cc:1769
#, fuzzy, gcc-internal-format
#| msgid "missing ')' in expression"
msgid "missing %<)%> in expression"
msgstr "運算式中缺少「)」"

#: expr.cc:1798
#, fuzzy, gcc-internal-format
#| msgid "'?' without following ':'"
msgid "%<?%> without following %<:%>"
msgstr "「?」後沒有「:」"

#: expr.cc:1808
msgid "integer overflow in preprocessor expression"
msgstr "預先處理運算式中整數溢出"

#: expr.cc:1813
#, fuzzy, gcc-internal-format
#| msgid "missing '(' in expression"
msgid "missing %<(%> in expression"
msgstr "運算式中缺少「(」"

#: expr.cc:1845
#, fuzzy, gcc-internal-format
#| msgid "the left operand of \"%s\" changes sign when promoted"
msgid "the left operand of %qs changes sign when promoted"
msgstr "「%s」的左運算元在提升時變換了符號"

#: expr.cc:1850
#, fuzzy, gcc-internal-format
#| msgid "the right operand of \"%s\" changes sign when promoted"
msgid "the right operand of %qs changes sign when promoted"
msgstr "「%s」的右運算元在提升時變換了符號"

#: expr.cc:2127
msgid "traditional C rejects the unary plus operator"
msgstr "傳統 C 不接受單元 + 運算子"

#: expr.cc:2227
#, fuzzy, gcc-internal-format, gfc-internal-format
#| msgid "comma operator in operand of #if"
msgid "comma operator in operand of #%s"
msgstr "#if 運算元中出現逗號"

#: expr.cc:2365
#, fuzzy, gcc-internal-format, gfc-internal-format
#| msgid "division by zero in #if"
msgid "division by zero in #%s"
msgstr "#if 中用零做除數"

#: files.cc:531
#, fuzzy, gcc-internal-format
#| msgid "NULL directory in find_file"
msgid "NULL directory in %<find_file%>"
msgstr "find_file 中有 NULL 目錄"

#: files.cc:604
msgid "one or more PCH files were found, but they were invalid"
msgstr "找到一個或多個 PCH 檔案，但它們是無效的"

#: files.cc:608
#, fuzzy, gcc-internal-format
#| msgid "use -Winvalid-pch for more information"
msgid "use %<-Winvalid-pch%> for more information"
msgstr "使用 -Winvalid-pch 以獲得更多資訊"

#: files.cc:738 files.cc:1695
#, gcc-internal-format, gfc-internal-format
msgid "%s is a block device"
msgstr "%s 是一個區塊裝置"

#: files.cc:757 files.cc:1295 files.cc:1321 files.cc:1726 files.cc:1796
#, gcc-internal-format, gfc-internal-format
msgid "%s is too large"
msgstr "%s 過大"

#: files.cc:797 files.cc:1817
#, gcc-internal-format, gfc-internal-format
msgid "%s is shorter than expected"
msgstr "%s 短於預期"

#: files.cc:1124
#, gcc-internal-format, gfc-internal-format
msgid "no include path in which to search for %s"
msgstr "沒有包含路徑可供搜尋 %s"

#: files.cc:1489
#, gcc-internal-format
msgid "%<gnu::base64%> parameter can be only used with %<\".\"%>"
msgstr ""

#: files.cc:1506
#, gcc-internal-format
msgid "%<gnu::base64%> argument not valid base64 encoded string"
msgstr ""

#: files.cc:2262
msgid "Multiple include guards may be useful for:\n"
msgstr "多個防止重包含可能對其有用：\n"

#: files.cc:2340
#, gcc-internal-format
msgid "header guard %qs followed by %<#define%> of a different macro"
msgstr ""

#: files.cc:2344
#, gcc-internal-format
msgid "%qs is defined here; did you mean %qs?"
msgstr ""

#: init.cc:687
#, fuzzy, gcc-internal-format
#| msgid "cppchar_t must be an unsigned type"
msgid "%<cppchar_t%> must be an unsigned type"
msgstr "cppchar_t 必須是無號類型"

#: init.cc:691
#, gcc-internal-format, gfc-internal-format
msgid "preprocessor arithmetic has maximum precision of %lu bits; target requires %lu bits"
msgstr "預先處理算術的最高精度為 %lu 位；目標需要 %lu 位"

#: init.cc:698
#, fuzzy, gcc-internal-format
#| msgid "CPP arithmetic must be at least as precise as a target int"
msgid "CPP arithmetic must be at least as precise as a target %<int%>"
msgstr "CPP 算術必須至少具有目標 int 的精度"

#: init.cc:702
#, fuzzy, gcc-internal-format
#| msgid "target char is less than 8 bits wide"
msgid "target %<char%> is less than 8 bits wide"
msgstr "目標 char 短於 8 位"

#: init.cc:706
#, fuzzy, gcc-internal-format
#| msgid "target wchar_t is narrower than target char"
msgid "target %<wchar_t%> is narrower than target %<char%>"
msgstr "目標 wchar_t 短於目標 char"

#: init.cc:710
#, fuzzy, gcc-internal-format
#| msgid "target int is narrower than target char"
msgid "target %<int%> is narrower than target %<char%>"
msgstr "目標 int 短於目標 char"

#: init.cc:715
msgid "CPP half-integer narrower than CPP character"
msgstr "CPP 半整數短於 CPP 字元"

#: init.cc:719
#, gcc-internal-format, gfc-internal-format
msgid "CPP on this host cannot handle wide character constants over %lu bits, but the target requires %lu bits"
msgstr "在此宿主機上，CPP 不能處理長於 %lu 位的寬字元常數，但目標需要 %lu 位"

#: lex.cc:1104
msgid "backslash and newline separated by space"
msgstr "反斜線和換列為空格所分隔"

#: lex.cc:1109 lex.cc:1145
msgid "trailing whitespace"
msgstr ""

#: lex.cc:1116
msgid "backslash-newline at end of file"
msgstr "反斜線-換列出現在檔案末尾"

#: lex.cc:1132
#, fuzzy, gcc-internal-format
#| msgid "trigraph ??%c converted to %c"
msgid "trigraph %<??%c%> converted to %<%c%>"
msgstr "三元符 ??%c 轉換為 %c"

#: lex.cc:1138
#, fuzzy, gcc-internal-format
#| msgid "trigraph ??%c ignored, use -trigraphs to enable"
msgid "trigraph %<??%c%> ignored, use %<-trigraphs%> to enable"
msgstr "三元符 ??%c 被忽略，請使用 -trigraphs 來啟用"

#: lex.cc:1149
msgid "too many consecutive spaces in leading whitespace"
msgstr ""

#: lex.cc:1154
msgid "tab after space in leading whitespace"
msgstr ""

#: lex.cc:1161
msgid "whitespace other than spaces in leading whitespace"
msgstr ""

#: lex.cc:1167
msgid "whitespace other than tabs in leading whitespace"
msgstr ""

#: lex.cc:1173
msgid "whitespace other than spaces and tabs in leading whitespace"
msgstr ""

#: lex.cc:1625
msgid "end of bidirectional context"
msgstr "雙向上下文 (bidirectional context) 的結尾"

#: lex.cc:1666
msgid "unpaired UTF-8 bidirectional control characters detected"
msgstr "偵測到不對稱的 UTF-8 雙向控制字元"

#: lex.cc:1670
msgid "unpaired UTF-8 bidirectional control character detected"
msgstr "偵測到不對稱的 UTF-8 雙向控制字元"

#: lex.cc:1708
#, fuzzy, gcc-internal-format
#| msgid "UTF-8 vs UCN mismatch when closing a context by \"%s\""
msgid "UTF-8 vs UCN mismatch when closing a context by %qs"
msgstr "由「%s」閉合上下文時發現 UTF-8 vs UCN 不符"

#: lex.cc:1717
#, fuzzy, gcc-internal-format
#| msgid "\"%s\" is closing an unopened context"
msgid "%qs is closing an unopened context"
msgstr "「%s」閉合沒有開頭的上下文"

#: lex.cc:1721
#, fuzzy, gcc-internal-format
#| msgid "found problematic Unicode character \"%s\""
msgid "found problematic Unicode character %qs"
msgstr "找到有問題的 Unicode 字元「%s」"

#: lex.cc:1751 lex.cc:1757
#, gcc-internal-format
msgid "invalid UTF-8 character %<<%x>%>"
msgstr ""

#: lex.cc:1767 lex.cc:1773
#, gcc-internal-format
msgid "invalid UTF-8 character %<<%x><%x>%>"
msgstr ""

#: lex.cc:1783 lex.cc:1789
#, gcc-internal-format
msgid "invalid UTF-8 character %<<%x><%x><%x>%>"
msgstr ""

#: lex.cc:1799 lex.cc:1805
#, gcc-internal-format
msgid "invalid UTF-8 character %<<%x><%x><%x><%x>%>"
msgstr ""

#: lex.cc:1887
#, fuzzy, gcc-internal-format
#| msgid "\"/*\" within comment"
msgid "%</*%> within comment"
msgstr "「/*」出現在註釋中"

#: lex.cc:1992
#, gcc-internal-format, gfc-internal-format
msgid "%s in preprocessing directive"
msgstr "預先處理指令中出現 %s"

#: lex.cc:2004
msgid "null character(s) ignored"
msgstr "忽略空字元"

#: lex.cc:2066
#, fuzzy, gcc-internal-format
#| msgid "`%.*s' is not in NFKC"
msgid "%<%.*s%> is not in NFKC"
msgstr "「%.*s」不在 NFKC 中"

#: lex.cc:2069 lex.cc:2072
#, fuzzy, gcc-internal-format
#| msgid "`%.*s' is not in NFC"
msgid "%<%.*s%> is not in NFC"
msgstr "「%.*s」不在 NFC 中"

#: lex.cc:2161
#, fuzzy, gcc-internal-format
#| msgid "__VA_OPT__ is not available until C++20"
msgid "%<__VA_OPT__%> is not available until C++20"
msgstr " C++20 前不支援 __VA_OPT__"

#: lex.cc:2164
#, fuzzy, gcc-internal-format
#| msgid "__VA_OPT__ is not available until C++20"
msgid "%<__VA_OPT__%> is not available until C23"
msgstr " C++20 前不支援 __VA_OPT__"

#: lex.cc:2172
#, fuzzy, gcc-internal-format
#| msgid "__VA_OPT__ can only appear in the expansion of a C++20 variadic macro"
msgid "%<__VA_OPT__%> can only appear in the expansion of a C++20 variadic macro"
msgstr "__VA_OPT__ 只能出現在 C++20 可變參數巨集的展開中"

#: lex.cc:2189
#, fuzzy, gcc-internal-format
#| msgid "attempt to use poisoned \"%s\""
msgid "attempt to use poisoned %qs"
msgstr "試圖使用已加料的「%s」"

#: lex.cc:2194
msgid "poisoned here"
msgstr ""

#: lex.cc:2204
#, fuzzy, gcc-internal-format
#| msgid "__VA_ARGS__ can only appear in the expansion of a C++11 variadic macro"
msgid "%<__VA_ARGS__%> can only appear in the expansion of a C++11 variadic macro"
msgstr "__VA_ARGS__ 只能出現在 C++11 可變參數巨集的展開中"

#: lex.cc:2208
#, fuzzy, gcc-internal-format
#| msgid "__VA_ARGS__ can only appear in the expansion of a C99 variadic macro"
msgid "%<__VA_ARGS__%> can only appear in the expansion of a C99 variadic macro"
msgstr "__VA_ARGS__ 只能出現在 C99 可變參數巨集的展開中"

#: lex.cc:2220
#, fuzzy, gcc-internal-format
#| msgid "identifier \"%s\" is a special operator name in C++"
msgid "identifier %qs is a special operator name in C++"
msgstr "識別碼「%s」在 C++ 中是特殊運算子名稱"

#: lex.cc:2356
msgid "adjacent digit separators"
msgstr "相鄰數字分隔符"

#: lex.cc:2505
msgid "invalid suffix on literal; C++11 requires a space between literal and string macro"
msgstr "無效的實字後綴；C++11 要求一個空白位於實字和字串巨集之間"

#: lex.cc:2727
msgid "raw string delimiter longer than 16 characters"
msgstr "原始字串分隔符號長度超過 16 字元"

#: lex.cc:2731
msgid "invalid new-line in raw string delimiter"
msgstr "無效的新列字元出現於原始字串分隔符號"

#: lex.cc:2735 lex.cc:5709
#, gcc-internal-format, gfc-internal-format
msgid "invalid character '%c' in raw string delimiter"
msgstr "無效字元「%c」出現於原始字串分隔符號"

#: lex.cc:2774 lex.cc:2797
msgid "unterminated raw string"
msgstr "未終結的原始字串"

#: lex.cc:2954
msgid "null character(s) preserved in literal"
msgstr "空字元將保留在原文中"

#: lex.cc:2957
#, gcc-internal-format, gfc-internal-format
msgid "missing terminating %c character"
msgstr "缺少終止 %c 字元"

#: lex.cc:2990
msgid "C++11 requires a space between string literal and macro"
msgstr "C++11 在字串常數和巨集中間需要一個空白"

#: lex.cc:3584
msgid "module control-line cannot be in included file"
msgstr "模組控制列不應出現在包含檔案中"

#: lex.cc:3598
#, fuzzy, gcc-internal-format
#| msgid "module control-line \"%s\" cannot be an object-like macro"
msgid "module control-line %qs cannot be an object-like macro"
msgstr "模組控制列「%s」不應是類物件巨集"

#: lex.cc:3636
#, fuzzy, gcc-internal-format
#| msgid "module control-line \"%s\" cannot be an object-like macro"
msgid "module name %qs cannot be an object-like macro"
msgstr "模組控制列「%s」不應是類物件巨集"

#: lex.cc:3642
#, fuzzy, gcc-internal-format
#| msgid "module control-line \"%s\" cannot be an object-like macro"
msgid "module partition %qs cannot be an object-like macro"
msgstr "模組控制列「%s」不應是類物件巨集"

#: lex.cc:3663
#, gcc-internal-format
msgid "module name followed by %<(%>"
msgstr ""

#: lex.cc:3667
#, gcc-internal-format
msgid "module partition followed by %<(%>"
msgstr ""

#: lex.cc:4073 lex.cc:5542 traditional.cc:174
msgid "unterminated comment"
msgstr "未終結的註釋"

#: lex.cc:4087 lex.cc:4122
msgid "C++ style comments are not allowed in ISO C90"
msgstr "C++ 風格的註釋在 ISO C90 中不被允許"

#: lex.cc:4090 lex.cc:4101 lex.cc:4125
msgid "(this will be reported only once per input file)"
msgstr "(此警告為每個輸入檔案只報告一次)"

#: lex.cc:4099
msgid "C++ style comments are incompatible with C90"
msgstr "C++ 風格的註釋與 C90 不相容"

#: lex.cc:4131
msgid "multi-line comment"
msgstr "多列註釋"

#: lex.cc:4589
#, gcc-internal-format, gfc-internal-format
msgid "unspellable token %s"
msgstr "無法拼出的識別字 %s"

#: lex.cc:5697
#, gcc-internal-format, gfc-internal-format
msgid "raw string delimiter longer than %d characters"
msgstr "原始字串分隔符長度超過 %d 個字元"

#: lex.cc:5767
msgid "unterminated literal"
msgstr "未終止的常值"

#: macro.cc:94
msgid "'##' cannot appear at either end of __VA_OPT__"
msgstr "「##」不能出現在 __VA_OPT__ 的尾端"

#: macro.cc:144
#, fuzzy, gcc-internal-format
#| msgid "__VA_OPT__ may not appear in a __VA_OPT__"
msgid "%<__VA_OPT__%> may not appear in a %<__VA_OPT__%>"
msgstr "__VA_OPT 不能在 __VA_OPT__ 中出現"

#: macro.cc:157
#, fuzzy, gcc-internal-format
#| msgid "__VA_OPT__ must be followed by an open parenthesis"
msgid "%<__VA_OPT__%> must be followed by an open parenthesis"
msgstr "__VA_OPT__ 之前需要接一個左括號"

#: macro.cc:235
#, fuzzy, gcc-internal-format
#| msgid "unterminated __VA_OPT__"
msgid "unterminated %<__VA_OPT__%>"
msgstr "未終止的 __VA_OPT__"

#: macro.cc:396
#, fuzzy, gcc-internal-format
#| msgid "\"%s\" used outside of preprocessing directive"
msgid "%qs used outside of preprocessing directive"
msgstr "「%s」用在預先處理指令外"

#: macro.cc:407
#, fuzzy, gcc-internal-format
#| msgid "missing '(' before \"%s\" operand"
msgid "missing %<(%> before %qs operand"
msgstr "「%s」運算元前缺少「(」"

#: macro.cc:425
#, fuzzy, gcc-internal-format
#| msgid "operator \"%s\" requires a header-name"
msgid "operator %qs requires a header-name"
msgstr "運算子「%s」需要標頭名稱"

#: macro.cc:454
#, fuzzy, gcc-internal-format
#| msgid "missing ')' after \"%s\" operand"
msgid "missing %<)%> after %qs operand"
msgstr "「%s」運算元後缺少「)」"

#: macro.cc:499
#, fuzzy, gcc-internal-format
#| msgid "empty filename in #%s"
msgid "empty filename in %qs"
msgstr "#%s 中檔案名稱為空"

#: macro.cc:533
#, fuzzy, gcc-internal-format
#| msgid "macro \"%s\" is not used"
msgid "macro %qs is not used"
msgstr "巨集「%s」未被使用"

#: macro.cc:572 macro.cc:891
#, fuzzy, gcc-internal-format
#| msgid "invalid built-in macro \"%s\""
msgid "invalid built-in macro %qs"
msgstr "無效的內建巨集「%s」"

#: macro.cc:579 macro.cc:687
#, fuzzy, gcc-internal-format
#| msgid "macro \"%s\" might prevent reproducible builds"
msgid "macro %qs might prevent reproducible builds"
msgstr "巨集「%s」也許會阻止可重製的組建"

#: macro.cc:610
msgid "could not determine file timestamp"
msgstr "無法決定檔案時間戳記"

#: macro.cc:701
msgid "could not determine date and time"
msgstr "無法決定日期與時間"

#: macro.cc:733
#, fuzzy, gcc-internal-format
#| msgid "__COUNTER__ expanded inside directive with -fdirectives-only"
msgid "%<__COUNTER__%> expanded inside directive with %<-fdirectives-only%>"
msgstr "__COUNTER__ 以 -fdirectives-only 在指令內部展開"

#: macro.cc:738
#, gcc-internal-format
msgid "%<__COUNTER__%> expanded more than 2147483648 times"
msgstr ""

#: macro.cc:763
#, fuzzy, gcc-internal-format
#| msgid "suggest not using #elif in traditional C"
msgid "%<__has_embed%> not supported in traditional C"
msgstr "建議在傳統 C 中不要使用 #elif"

#: macro.cc:1013
#, fuzzy, gcc-internal-format
#| msgid "invalid string literal, ignoring final '\\'"
msgid "invalid string literal, ignoring final %<\\%>"
msgstr "無效的原文字串，忽略最後的「\\」"

#: macro.cc:1077
#, fuzzy, gcc-internal-format
#| msgid "pasting \"%.*s\" and \"%.*s\" does not give a valid preprocessing token"
msgid "pasting %<%.*s%> and %<%.*s%> does not give a valid preprocessing token"
msgstr "「%.*s」和「%.*s」的貼上沒有提供有效的預處理代符"

#: macro.cc:1209
#, fuzzy, gcc-internal-format
#| msgid "ISO C++11 requires at least one argument for the \"...\" in a variadic macro"
msgid "ISO C++11 requires at least one argument for the %<...%> in a variadic macro"
msgstr "ISO C++11 需要至少一個引數做為可變巨集中的「...」"

#: macro.cc:1213
#, fuzzy, gcc-internal-format
#| msgid "ISO C99 requires at least one argument for the \"...\" in a variadic macro"
msgid "ISO C99 requires at least one argument for the %<...%> in a variadic macro"
msgstr "ISO C99 需要至少一個引數做為可變巨集中的「...」"

#: macro.cc:1220
#, fuzzy, gcc-internal-format
#| msgid "macro \"%s\" requires %u arguments, but only %u given"
msgid "macro %qs requires %u arguments, but only %u given"
msgstr "巨集「%s」需要 %u 個引數，但只給出了 %u 個"

#: macro.cc:1225
#, fuzzy, gcc-internal-format
#| msgid "macro \"%s\" passed %u arguments, but takes just %u"
msgid "macro %qs passed %u arguments, but takes just %u"
msgstr "巨集「%s」傳遞了 %u 個引數，但只需要 %u 個"

#: macro.cc:1229
#, fuzzy, gcc-internal-format
#| msgid "macro \"%s\" defined here"
msgid "macro %qs defined here"
msgstr "巨集「%s」在此處定義"

#: macro.cc:1423 traditional.cc:822
#, fuzzy, gcc-internal-format
#| msgid "unterminated argument list invoking macro \"%s\""
msgid "unterminated argument list invoking macro %qs"
msgstr "呼叫巨集「%s」時引數清單未終止"

#: macro.cc:1569
#, fuzzy, gcc-internal-format
#| msgid "function-like macro \"%s\" must be used with arguments in traditional C"
msgid "function-like macro %qs must be used with arguments in traditional C"
msgstr "類似函式的巨集「%s」在傳統 C 中必須與引數一起使用"

#: macro.cc:2404
#, gcc-internal-format, gfc-internal-format
msgid "invoking macro %s argument %d: empty macro arguments are undefined in ISO C++98"
msgstr "調用巨集 %s 引數 %d：空的巨集引數在 ISO C++98 中未定義"

#: macro.cc:2412 macro.cc:2421
#, gcc-internal-format, gfc-internal-format
msgid "invoking macro %s argument %d: empty macro arguments are undefined in ISO C90"
msgstr "調用巨集 %s 引數 %d：空的巨集引數在 ISO C90 中未定義"

#: macro.cc:3244
#, gcc-internal-format
msgid "%qc in module name or partition comes from or after macro expansion"
msgstr ""

#: macro.cc:3494
#, fuzzy, gcc-internal-format
#| msgid "duplicate macro parameter \"%s\""
msgid "duplicate macro parameter %qs"
msgstr "重複的巨集參數「%s」"

#: macro.cc:3576
#, fuzzy, gcc-internal-format
#| msgid "expected parameter name, found \"%s\""
msgid "expected parameter name, found %qs"
msgstr "原先期望參數名稱，卻找到「%s」"

#: macro.cc:3577
#, fuzzy, gcc-internal-format
#| msgid "expected ',' or ')', found \"%s\""
msgid "expected %<,%> or %<)%>, found %qs"
msgstr "原先期望「,」或「)」，卻找到「%s」"

#: macro.cc:3578
msgid "expected parameter name before end of line"
msgstr "原先期望在行尾前有參數名稱"

#: macro.cc:3579
#, fuzzy, gcc-internal-format
#| msgid "expected ')' before end of line"
msgid "expected %<)%> before end of line"
msgstr "原先期望在行尾前有「)」"

#: macro.cc:3580
#, fuzzy, gcc-internal-format
#| msgid "expected ')' after \"...\""
msgid "expected %<)%> after %<...%>"
msgstr "原先期望「...」後有「)」"

#: macro.cc:3638
msgid "anonymous variadic macros were introduced in C++11"
msgstr "匿名可變參數巨集在 C++11 中被引入"

#: macro.cc:3639 macro.cc:3643
msgid "anonymous variadic macros were introduced in C99"
msgstr "匿名可變參數巨集在 C99 中被引入"

#: macro.cc:3649
msgid "ISO C++ does not permit named variadic macros"
msgstr "ISO C++ 不允許具名的可變參數巨集"

#: macro.cc:3650
msgid "ISO C does not permit named variadic macros"
msgstr "ISO C 不允許具名的可變參數巨集"

#: macro.cc:3696
#, fuzzy, gcc-internal-format
#| msgid "'##' cannot appear at either end of a macro expansion"
msgid "%<##%> cannot appear at either end of a macro expansion"
msgstr "「##」不能出現在巨集展開的兩端"

#: macro.cc:3734
msgid "ISO C++11 requires whitespace after the macro name"
msgstr "ISO C++11 要求巨集名後必須有空白"

#: macro.cc:3735
msgid "ISO C99 requires whitespace after the macro name"
msgstr "ISO C99 要求巨集名後必須有空白"

#: macro.cc:3759
msgid "missing whitespace after the macro name"
msgstr "巨集名後缺少空白"

#: macro.cc:3812
#, fuzzy, gcc-internal-format
#| msgid "'#' is not followed by a macro parameter"
msgid "%<#%> is not followed by a macro parameter"
msgstr "「#」後沒有巨集參數"

#: macro.cc:3976 macro.cc:3980
#, gcc-internal-format
msgid "keyword %qs defined as macro"
msgstr ""

#: macro.cc:3996
#, fuzzy, gcc-internal-format
#| msgid "\"%s\" redefined"
msgid "%qs redefined"
msgstr "「%s」重定義"

#: macro.cc:4000
msgid "this is the location of the previous definition"
msgstr "這是先前定義的位置"

#: macro.cc:4009
#, fuzzy, gcc-internal-format
#| msgid "\"%s\" redefined"
msgid "%qs defined"
msgstr "「%s」重定義"

#: macro.cc:4143
#, fuzzy, gcc-internal-format
#| msgid "macro argument \"%s\" would be stringified in traditional C"
msgid "macro argument %qs would be stringified in traditional C"
msgstr "巨集引數「%s」將在傳統 C 中被字串化"

#: pch.cc:90 pch.cc:342 pch.cc:356 pch.cc:374 pch.cc:380 pch.cc:389 pch.cc:396
msgid "while writing precompiled header"
msgstr "在寫入預先編譯標頭時"

#: pch.cc:616
#, fuzzy, gcc-internal-format
#| msgid "%s: not used because `%.*s' is poisoned"
msgid "%s: not used because %<%.*s%> is poisoned"
msgstr "%s：未使用因為『%.*s』是有害的"

#: pch.cc:638
#, fuzzy, gcc-internal-format
#| msgid "%s: not used because `%.*s' not defined"
msgid "%s: not used because %<%.*s%> not defined"
msgstr "%s：未使用，因為「%.*s」未定義"

#: pch.cc:650
#, fuzzy, gcc-internal-format
#| msgid "%s: not used because `%.*s' defined as `%s' not `%.*s'"
msgid "%s: not used because %<%.*s%> defined as %qs not %<%.*s%>"
msgstr "%s：未使用，因為「%.*s」被定義為「%s」而非「%*.s」"

#: pch.cc:693
#, fuzzy, gcc-internal-format
#| msgid "%s: not used because `%s' is defined"
msgid "%s: not used because %qs is defined"
msgstr "%s：未使用，因為「%s」已定義"

#: pch.cc:713
#, fuzzy, gcc-internal-format
#| msgid "%s: not used because `__COUNTER__' is invalid"
msgid "%s: not used because %<__COUNTER__%> is invalid"
msgstr "%s：未使用因為『__COUNTER__』無效"

#: pch.cc:722 pch.cc:968
msgid "while reading precompiled header"
msgstr "在讀取預先編譯標頭時"

#: traditional.cc:891
#, fuzzy, gcc-internal-format
#| msgid "detected recursion whilst expanding macro \"%s\""
msgid "detected recursion whilst expanding macro %qs"
msgstr "展開巨集「%s」時偵測到遞迴"

#: traditional.cc:1114
msgid "syntax error in macro parameter list"
msgstr "巨集參數清單語法錯誤"

#~ msgid "character constant too long for its type"
#~ msgstr "字元常數大小超出其類型"

#~ msgid "invalid #pragma pop_macro directive"
#~ msgstr "無效的 #pragma pop_macro 指令"

#, c-format
#~ msgid "#%s before C2X is a GCC extension"
#~ msgstr "C2X 之前的 #%s 是 GCC 擴充功能"

#~ msgid "#elif without #if"
#~ msgstr "#elif 沒有匹配的 #if"

#~ msgid "#elif after #else"
#~ msgstr "#elif 出現在 #else 後"

#~ msgid "binary constants are a GCC extension"
#~ msgstr "二進位常數是 GCC 的擴充功能"

#~ msgid "\"__has_include__\" cannot be used as a macro name"
#~ msgstr "「__has_include__」不能做為巨集名"

#~ msgid "#include nested too deeply"
#~ msgstr "#include 巢狀過深"

#~ msgid "missing ')' after \"__has_include__\""
#~ msgstr "「__has_include__」 後缺少「)」"

#~ msgid "\"%s\" may not appear in macro parameter list"
#~ msgstr "「%s」不能出現在巨集參數清單中"

#~ msgid "macro parameters must be comma-separated"
#~ msgstr "巨集參數必須由逗號隔開"

#~ msgid "parameter name missing"
#~ msgstr "缺少參數名"

#~ msgid "missing ')' in macro parameter list"
#~ msgstr "在巨集參數表中缺少「)」"

#~ msgid "invalid hash type %d in cpp_macro_definition"
#~ msgstr "cpp_macro_definition 中有無效的雜湊類型 %d"

#~ msgid "Character %x might not be NFKC"
#~ msgstr "字元 %x 可能不是 NFKC"