blob: 1d75c655df84386b4bb0188a703008f854192b89 [file] [log] [blame]
/* Definitions for the Blackfin port.
Copyright (C) 2005-2022 Free Software Foundation, Inc.
Contributed by Analog Devices.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published
by the Free Software Foundation; either version 3, or (at your
option) any later version.
GCC is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License for more details.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING3. If not see
<http://www.gnu.org/licenses/>. */
#ifndef _BFIN_CONFIG
#define _BFIN_CONFIG
#ifndef BFIN_OPTS_H
#include "config/bfin/bfin-opts.h"
#endif
#define OBJECT_FORMAT_ELF
#define BRT 1
#define BRF 0
/* Predefinition in the preprocessor for this target machine */
#ifndef TARGET_CPU_CPP_BUILTINS
#define TARGET_CPU_CPP_BUILTINS() \
do \
{ \
builtin_define_std ("bfin"); \
builtin_define_std ("BFIN"); \
builtin_define ("__ADSPBLACKFIN__"); \
builtin_define ("__ADSPLPBLACKFIN__"); \
\
switch (bfin_cpu_type) \
{ \
case BFIN_CPU_UNKNOWN: \
break; \
case BFIN_CPU_BF512: \
builtin_define ("__ADSPBF512__"); \
builtin_define ("__ADSPBF51x__"); \
break; \
case BFIN_CPU_BF514: \
builtin_define ("__ADSPBF514__"); \
builtin_define ("__ADSPBF51x__"); \
break; \
case BFIN_CPU_BF516: \
builtin_define ("__ADSPBF516__"); \
builtin_define ("__ADSPBF51x__"); \
break; \
case BFIN_CPU_BF518: \
builtin_define ("__ADSPBF518__"); \
builtin_define ("__ADSPBF51x__"); \
break; \
case BFIN_CPU_BF522: \
builtin_define ("__ADSPBF522__"); \
builtin_define ("__ADSPBF52x__"); \
break; \
case BFIN_CPU_BF523: \
builtin_define ("__ADSPBF523__"); \
builtin_define ("__ADSPBF52x__"); \
break; \
case BFIN_CPU_BF524: \
builtin_define ("__ADSPBF524__"); \
builtin_define ("__ADSPBF52x__"); \
break; \
case BFIN_CPU_BF525: \
builtin_define ("__ADSPBF525__"); \
builtin_define ("__ADSPBF52x__"); \
break; \
case BFIN_CPU_BF526: \
builtin_define ("__ADSPBF526__"); \
builtin_define ("__ADSPBF52x__"); \
break; \
case BFIN_CPU_BF527: \
builtin_define ("__ADSPBF527__"); \
builtin_define ("__ADSPBF52x__"); \
break; \
case BFIN_CPU_BF531: \
builtin_define ("__ADSPBF531__"); \
break; \
case BFIN_CPU_BF532: \
builtin_define ("__ADSPBF532__"); \
break; \
case BFIN_CPU_BF533: \
builtin_define ("__ADSPBF533__"); \
break; \
case BFIN_CPU_BF534: \
builtin_define ("__ADSPBF534__"); \
break; \
case BFIN_CPU_BF536: \
builtin_define ("__ADSPBF536__"); \
break; \
case BFIN_CPU_BF537: \
builtin_define ("__ADSPBF537__"); \
break; \
case BFIN_CPU_BF538: \
builtin_define ("__ADSPBF538__"); \
break; \
case BFIN_CPU_BF539: \
builtin_define ("__ADSPBF539__"); \
break; \
case BFIN_CPU_BF542M: \
builtin_define ("__ADSPBF542M__"); \
/* FALLTHRU */ \
case BFIN_CPU_BF542: \
builtin_define ("__ADSPBF542__"); \
builtin_define ("__ADSPBF54x__"); \
break; \
case BFIN_CPU_BF544M: \
builtin_define ("__ADSPBF544M__"); \
/* FALLTHRU */ \
case BFIN_CPU_BF544: \
builtin_define ("__ADSPBF544__"); \
builtin_define ("__ADSPBF54x__"); \
break; \
case BFIN_CPU_BF547M: \
builtin_define ("__ADSPBF547M__"); \
/* FALLTHRU */ \
case BFIN_CPU_BF547: \
builtin_define ("__ADSPBF547__"); \
builtin_define ("__ADSPBF54x__"); \
break; \
case BFIN_CPU_BF548M: \
builtin_define ("__ADSPBF548M__"); \
/* FALLTHRU */ \
case BFIN_CPU_BF548: \
builtin_define ("__ADSPBF548__"); \
builtin_define ("__ADSPBF54x__"); \
break; \
case BFIN_CPU_BF549M: \
builtin_define ("__ADSPBF549M__"); \
/* FALLTHRU */ \
case BFIN_CPU_BF549: \
builtin_define ("__ADSPBF549__"); \
builtin_define ("__ADSPBF54x__"); \
break; \
case BFIN_CPU_BF561: \
builtin_define ("__ADSPBF561__"); \
break; \
case BFIN_CPU_BF592: \
builtin_define ("__ADSPBF592__"); \
builtin_define ("__ADSPBF59x__"); \
break; \
} \
\
if (bfin_si_revision != -1) \
{ \
/* space of 0xnnnn and a NUL */ \
char *buf = XALLOCAVEC (char, 7); \
\
sprintf (buf, "0x%04x", bfin_si_revision); \
builtin_define_with_value ("__SILICON_REVISION__", buf, 0); \
} \
\
if (bfin_workarounds) \
builtin_define ("__WORKAROUNDS_ENABLED"); \
if (ENABLE_WA_SPECULATIVE_LOADS) \
builtin_define ("__WORKAROUND_SPECULATIVE_LOADS"); \
if (ENABLE_WA_SPECULATIVE_SYNCS) \
builtin_define ("__WORKAROUND_SPECULATIVE_SYNCS"); \
if (ENABLE_WA_INDIRECT_CALLS) \
builtin_define ("__WORKAROUND_INDIRECT_CALLS"); \
if (ENABLE_WA_RETS) \
builtin_define ("__WORKAROUND_RETS"); \
\
if (TARGET_FDPIC) \
{ \
builtin_define ("__BFIN_FDPIC__"); \
builtin_define ("__FDPIC__"); \
} \
if (TARGET_ID_SHARED_LIBRARY \
&& !TARGET_SEP_DATA) \
builtin_define ("__ID_SHARED_LIB__"); \
if (flag_no_builtin) \
builtin_define ("__NO_BUILTIN"); \
if (TARGET_MULTICORE) \
builtin_define ("__BFIN_MULTICORE"); \
if (TARGET_COREA) \
builtin_define ("__BFIN_COREA"); \
if (TARGET_COREB) \
builtin_define ("__BFIN_COREB"); \
if (TARGET_SDRAM) \
builtin_define ("__BFIN_SDRAM"); \
} \
while (0)
#endif
#define DRIVER_SELF_SPECS SUBTARGET_DRIVER_SELF_SPECS "\
%{mleaf-id-shared-library:%{!mid-shared-library:-mid-shared-library}} \
%{mfdpic:%{!fpic:%{!fpie:%{!fPIC:%{!fPIE:\
%{!fno-pic:%{!fno-pie:%{!fno-PIC:%{!fno-PIE:-fpie}}}}}}}}} \
"
#ifndef SUBTARGET_DRIVER_SELF_SPECS
# define SUBTARGET_DRIVER_SELF_SPECS
#endif
#define LINK_GCC_C_SEQUENCE_SPEC "\
%{mfast-fp:-lbffastfp} %G %{!nolibc:%L} %{mfast-fp:-lbffastfp} %G \
"
#undef ASM_SPEC
#define ASM_SPEC "\
%{mno-fdpic:-mnopic} %{mfdpic}"
#define LINK_SPEC "\
%{h*} %{v:-V} \
%{mfdpic:-melf32bfinfd -z text} \
%{static:-dn -Bstatic} \
%{shared:-G -Bdynamic} \
%{symbolic:-Bsymbolic} \
-init __init -fini __fini "
/* Generate DSP instructions, like DSP halfword loads */
#define TARGET_DSP (1)
#define TARGET_DEFAULT 0
/* Maximum number of library ids we permit */
#define MAX_LIBRARY_ID 255
extern const char *bfin_library_id_string;
#define FUNCTION_MODE SImode
#define Pmode SImode
/* store-condition-codes instructions store 0 for false
This is the value stored for true. */
#define STORE_FLAG_VALUE 1
/* Define this if pushing a word on the stack
makes the stack pointer a smaller address. */
#define STACK_GROWS_DOWNWARD 1
#define STACK_PUSH_CODE PRE_DEC
/* Define this to nonzero if the nominal address of the stack frame
is at the high-address end of the local variables;
that is, each additional local variable allocated
goes at a more negative offset in the frame. */
#define FRAME_GROWS_DOWNWARD 1
/* We define a dummy ARGP register; the parameters start at offset 0 from
it. */
#define FIRST_PARM_OFFSET(DECL) 0
/* Register to use for pushing function arguments. */
#define STACK_POINTER_REGNUM REG_P6
/* Base register for access to local variables of the function. */
#define FRAME_POINTER_REGNUM REG_P7
/* A dummy register that will be eliminated to either FP or SP. */
#define ARG_POINTER_REGNUM REG_ARGP
/* `PIC_OFFSET_TABLE_REGNUM'
The register number of the register used to address a table of
static data addresses in memory. In some cases this register is
defined by a processor's "application binary interface" (ABI).
When this macro is defined, RTL is generated for this register
once, as with the stack pointer and frame pointer registers. If
this macro is not defined, it is up to the machine-dependent files
to allocate such a register (if necessary). */
#define PIC_OFFSET_TABLE_REGNUM (REG_P5)
#define FDPIC_FPTR_REGNO REG_P1
#define FDPIC_REGNO REG_P3
#define OUR_FDPIC_REG get_hard_reg_initial_val (SImode, FDPIC_REGNO)
/* A static chain register for nested functions. We need to use a
call-clobbered register for this. */
#define STATIC_CHAIN_REGNUM REG_P2
/* Define this if functions should assume that stack space has been
allocated for arguments even when their values are passed in
registers.
The value of this macro is the size, in bytes, of the area reserved for
arguments passed in registers.
This space can either be allocated by the caller or be a part of the
machine-dependent stack frame: `OUTGOING_REG_PARM_STACK_SPACE'
says which. */
#define FIXED_STACK_AREA 12
#define REG_PARM_STACK_SPACE(FNDECL) FIXED_STACK_AREA
/* Define this if the above stack space is to be considered part of the
* space allocated by the caller. */
#define OUTGOING_REG_PARM_STACK_SPACE(FNTYPE) 1
/* Define this if the maximum size of all the outgoing args is to be
accumulated and pushed during the prologue. The amount can be
found in the variable crtl->outgoing_args_size. */
#define ACCUMULATE_OUTGOING_ARGS 1
/*#define DATA_ALIGNMENT(TYPE, BASIC-ALIGN) for arrays.. */
/* If defined, a C expression to compute the alignment for a local
variable. TYPE is the data type, and ALIGN is the alignment that
the object would ordinarily have. The value of this macro is used
instead of that alignment to align the object.
If this macro is not defined, then ALIGN is used.
One use of this macro is to increase alignment of medium-size
data to make it all fit in fewer cache lines. */
#define LOCAL_ALIGNMENT(TYPE, ALIGN) bfin_local_alignment ((TYPE), (ALIGN))
#define TRAMPOLINE_SIZE (TARGET_FDPIC ? 30 : 18)
/* Definitions for register eliminations.
This is an array of structures. Each structure initializes one pair
of eliminable registers. The "from" register number is given first,
followed by "to". Eliminations of the same "from" register are listed
in order of preference.
There are two registers that can always be eliminated on the i386.
The frame pointer and the arg pointer can be replaced by either the
hard frame pointer or to the stack pointer, depending upon the
circumstances. The hard frame pointer is not used before reload and
so it is not eligible for elimination. */
#define ELIMINABLE_REGS \
{{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
{ ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \
{ FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}} \
/* Define the offset between two registers, one to be eliminated, and the other
its replacement, at the start of a routine. */
#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
((OFFSET) = bfin_initial_elimination_offset ((FROM), (TO)))
/* This processor has
8 data register for doing arithmetic
8 pointer register for doing addressing, including
1 stack pointer P6
1 frame pointer P7
4 sets of indexing registers (I0-3, B0-3, L0-3, M0-3)
1 condition code flag register CC
5 return address registers RETS/I/X/N/E
1 arithmetic status register (ASTAT). */
#define FIRST_PSEUDO_REGISTER 50
#define D_REGNO_P(X) ((X) <= REG_R7)
#define P_REGNO_P(X) ((X) >= REG_P0 && (X) <= REG_P7)
#define I_REGNO_P(X) ((X) >= REG_I0 && (X) <= REG_I3)
#define DP_REGNO_P(X) (D_REGNO_P (X) || P_REGNO_P (X))
#define ADDRESS_REGNO_P(X) ((X) >= REG_P0 && (X) <= REG_M3)
#define DREG_P(X) (REG_P (X) && D_REGNO_P (REGNO (X)))
#define PREG_P(X) (REG_P (X) && P_REGNO_P (REGNO (X)))
#define IREG_P(X) (REG_P (X) && I_REGNO_P (REGNO (X)))
#define DPREG_P(X) (REG_P (X) && DP_REGNO_P (REGNO (X)))
#define REGISTER_NAMES { \
"R0", "R1", "R2", "R3", "R4", "R5", "R6", "R7", \
"P0", "P1", "P2", "P3", "P4", "P5", "SP", "FP", \
"I0", "I1", "I2", "I3", "B0", "B1", "B2", "B3", \
"L0", "L1", "L2", "L3", "M0", "M1", "M2", "M3", \
"A0", "A1", \
"CC", \
"RETS", "RETI", "RETX", "RETN", "RETE", "ASTAT", "SEQSTAT", "USP", \
"ARGP", \
"LT0", "LT1", "LC0", "LC1", "LB0", "LB1" \
}
#define SHORT_REGISTER_NAMES { \
"R0.L", "R1.L", "R2.L", "R3.L", "R4.L", "R5.L", "R6.L", "R7.L", \
"P0.L", "P1.L", "P2.L", "P3.L", "P4.L", "P5.L", "SP.L", "FP.L", \
"I0.L", "I1.L", "I2.L", "I3.L", "B0.L", "B1.L", "B2.L", "B3.L", \
"L0.L", "L1.L", "L2.L", "L3.L", "M0.L", "M1.L", "M2.L", "M3.L", }
#define HIGH_REGISTER_NAMES { \
"R0.H", "R1.H", "R2.H", "R3.H", "R4.H", "R5.H", "R6.H", "R7.H", \
"P0.H", "P1.H", "P2.H", "P3.H", "P4.H", "P5.H", "SP.H", "FP.H", \
"I0.H", "I1.H", "I2.H", "I3.H", "B0.H", "B1.H", "B2.H", "B3.H", \
"L0.H", "L1.H", "L2.H", "L3.H", "M0.H", "M1.H", "M2.H", "M3.H", }
#define DREGS_PAIR_NAMES { \
"R1:0.p", 0, "R3:2.p", 0, "R5:4.p", 0, "R7:6.p", 0, }
#define BYTE_REGISTER_NAMES { \
"R0.B", "R1.B", "R2.B", "R3.B", "R4.B", "R5.B", "R6.B", "R7.B", }
/* 1 for registers that have pervasive standard uses
and are not available for the register allocator. */
#define FIXED_REGISTERS \
/*r0 r1 r2 r3 r4 r5 r6 r7 p0 p1 p2 p3 p4 p5 p6 p7 */ \
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, \
/*i0 i1 i2 i3 b0 b1 b2 b3 l0 l1 l2 l3 m0 m1 m2 m3 */ \
0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, \
/*a0 a1 cc rets/i/x/n/e astat seqstat usp argp lt0/1 lc0/1 */ \
0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
/*lb0/1 */ \
1, 1 \
}
/* 1 for registers not available across function calls.
These must include the FIXED_REGISTERS and also any
registers that can be used without being saved.
The latter must include the registers where values are returned
and the register where structure-value addresses are passed.
Aside from that, you can include as many other registers as you like. */
#define CALL_USED_REGISTERS \
/*r0 r1 r2 r3 r4 r5 r6 r7 p0 p1 p2 p3 p4 p5 p6 p7 */ \
{ 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 1, 0, \
/*i0 i1 i2 i3 b0 b1 b2 b3 l0 l1 l2 l3 m0 m1 m2 m3 */ \
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
/*a0 a1 cc rets/i/x/n/e astat seqstat usp argp lt0/1 lc0/1 */ \
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
/*lb0/1 */ \
1, 1 \
}
/* Order in which to allocate registers. Each register must be
listed once, even those in FIXED_REGISTERS. List frame pointer
late and fixed registers last. Note that, in general, we prefer
registers listed in CALL_USED_REGISTERS, keeping the others
available for storage of persistent values. */
#define REG_ALLOC_ORDER \
{ REG_R0, REG_R1, REG_R2, REG_R3, REG_R7, REG_R6, REG_R5, REG_R4, \
REG_P2, REG_P1, REG_P0, REG_P5, REG_P4, REG_P3, REG_P6, REG_P7, \
REG_A0, REG_A1, \
REG_I0, REG_I1, REG_I2, REG_I3, REG_B0, REG_B1, REG_B2, REG_B3, \
REG_L0, REG_L1, REG_L2, REG_L3, REG_M0, REG_M1, REG_M2, REG_M3, \
REG_RETS, REG_RETI, REG_RETX, REG_RETN, REG_RETE, \
REG_ASTAT, REG_SEQSTAT, REG_USP, \
REG_CC, REG_ARGP, \
REG_LT0, REG_LT1, REG_LC0, REG_LC1, REG_LB0, REG_LB1 \
}
/* Define the classes of registers for register constraints in the
machine description. Also define ranges of constants.
One of the classes must always be named ALL_REGS and include all hard regs.
If there is more than one class, another class must be named NO_REGS
and contain no registers.
The name GENERAL_REGS must be the name of a class (or an alias for
another name such as ALL_REGS). This is the class of registers
that is allowed by "g" or "r" in a register constraint.
Also, registers outside this class are allocated only when
instructions express preferences for them.
The classes must be numbered in nondecreasing order; that is,
a larger-numbered class must never be contained completely
in a smaller-numbered class.
For any two classes, it is very desirable that there be another
class that represents their union. */
enum reg_class
{
NO_REGS,
IREGS,
BREGS,
LREGS,
MREGS,
CIRCREGS, /* Circular buffering registers, Ix, Bx, Lx together form. See Automatic Circular Buffering. */
DAGREGS,
EVEN_AREGS,
ODD_AREGS,
AREGS,
CCREGS,
EVEN_DREGS,
ODD_DREGS,
D0REGS,
D1REGS,
D2REGS,
D3REGS,
D4REGS,
D5REGS,
D6REGS,
D7REGS,
DREGS,
P0REGS,
FDPIC_REGS,
FDPIC_FPTR_REGS,
PREGS_CLOBBERED,
PREGS,
IPREGS,
DPREGS,
MOST_REGS,
LT_REGS,
LC_REGS,
LB_REGS,
PROLOGUE_REGS,
NON_A_CC_REGS,
ALL_REGS, LIM_REG_CLASSES
};
#define N_REG_CLASSES ((int)LIM_REG_CLASSES)
#define GENERAL_REGS DPREGS
/* Give names of register classes as strings for dump file. */
#define REG_CLASS_NAMES \
{ "NO_REGS", \
"IREGS", \
"BREGS", \
"LREGS", \
"MREGS", \
"CIRCREGS", \
"DAGREGS", \
"EVEN_AREGS", \
"ODD_AREGS", \
"AREGS", \
"CCREGS", \
"EVEN_DREGS", \
"ODD_DREGS", \
"D0REGS", \
"D1REGS", \
"D2REGS", \
"D3REGS", \
"D4REGS", \
"D5REGS", \
"D6REGS", \
"D7REGS", \
"DREGS", \
"P0REGS", \
"FDPIC_REGS", \
"FDPIC_FPTR_REGS", \
"PREGS_CLOBBERED", \
"PREGS", \
"IPREGS", \
"DPREGS", \
"MOST_REGS", \
"LT_REGS", \
"LC_REGS", \
"LB_REGS", \
"PROLOGUE_REGS", \
"NON_A_CC_REGS", \
"ALL_REGS" }
/* An initializer containing the contents of the register classes, as integers
which are bit masks. The Nth integer specifies the contents of class N.
The way the integer MASK is interpreted is that register R is in the class
if `MASK & (1 << R)' is 1.
When the machine has more than 32 registers, an integer does not suffice.
Then the integers are replaced by sub-initializers, braced groupings
containing several integers. Each sub-initializer must be suitable as an
initializer for the type `HARD_REG_SET' which is defined in
`hard-reg-set.h'. */
/* NOTE: DSP registers, IREGS - AREGS, are not GENERAL_REGS. We use
MOST_REGS as the union of DPREGS and DAGREGS. */
#define REG_CLASS_CONTENTS \
/* 31 - 0 63-32 */ \
{ { 0x00000000, 0 }, /* NO_REGS */ \
{ 0x000f0000, 0 }, /* IREGS */ \
{ 0x00f00000, 0 }, /* BREGS */ \
{ 0x0f000000, 0 }, /* LREGS */ \
{ 0xf0000000, 0 }, /* MREGS */ \
{ 0x0fff0000, 0 }, /* CIRCREGS */ \
{ 0xffff0000, 0 }, /* DAGREGS */ \
{ 0x00000000, 0x1 }, /* EVEN_AREGS */ \
{ 0x00000000, 0x2 }, /* ODD_AREGS */ \
{ 0x00000000, 0x3 }, /* AREGS */ \
{ 0x00000000, 0x4 }, /* CCREGS */ \
{ 0x00000055, 0 }, /* EVEN_DREGS */ \
{ 0x000000aa, 0 }, /* ODD_DREGS */ \
{ 0x00000001, 0 }, /* D0REGS */ \
{ 0x00000002, 0 }, /* D1REGS */ \
{ 0x00000004, 0 }, /* D2REGS */ \
{ 0x00000008, 0 }, /* D3REGS */ \
{ 0x00000010, 0 }, /* D4REGS */ \
{ 0x00000020, 0 }, /* D5REGS */ \
{ 0x00000040, 0 }, /* D6REGS */ \
{ 0x00000080, 0 }, /* D7REGS */ \
{ 0x000000ff, 0 }, /* DREGS */ \
{ 0x00000100, 0x000 }, /* P0REGS */ \
{ 0x00000800, 0x000 }, /* FDPIC_REGS */ \
{ 0x00000200, 0x000 }, /* FDPIC_FPTR_REGS */ \
{ 0x00004700, 0x800 }, /* PREGS_CLOBBERED */ \
{ 0x0000ff00, 0x800 }, /* PREGS */ \
{ 0x000fff00, 0x800 }, /* IPREGS */ \
{ 0x0000ffff, 0x800 }, /* DPREGS */ \
{ 0xffffffff, 0x800 }, /* MOST_REGS */\
{ 0x00000000, 0x3000 }, /* LT_REGS */\
{ 0x00000000, 0xc000 }, /* LC_REGS */\
{ 0x00000000, 0x30000 }, /* LB_REGS */\
{ 0x00000000, 0x3f7f8 }, /* PROLOGUE_REGS */\
{ 0xffffffff, 0x3fff8 }, /* NON_A_CC_REGS */\
{ 0xffffffff, 0x3ffff }} /* ALL_REGS */
#define IREG_POSSIBLE_P(OUTER) \
((OUTER) == POST_INC || (OUTER) == PRE_INC \
|| (OUTER) == POST_DEC || (OUTER) == PRE_DEC \
|| (OUTER) == MEM || (OUTER) == ADDRESS)
#define MODE_CODE_BASE_REG_CLASS(MODE, AS, OUTER, INDEX) \
((MODE) == HImode && IREG_POSSIBLE_P (OUTER) ? IPREGS : PREGS)
#define INDEX_REG_CLASS PREGS
#define REGNO_OK_FOR_BASE_STRICT_P(X, MODE, OUTER, INDEX) \
(P_REGNO_P (X) || (X) == REG_ARGP \
|| (IREG_POSSIBLE_P (OUTER) && (MODE) == HImode \
&& I_REGNO_P (X)))
#define REGNO_OK_FOR_BASE_NONSTRICT_P(X, MODE, OUTER, INDEX) \
((X) >= FIRST_PSEUDO_REGISTER \
|| REGNO_OK_FOR_BASE_STRICT_P (X, MODE, OUTER, INDEX))
#ifdef REG_OK_STRICT
#define REGNO_MODE_CODE_OK_FOR_BASE_P(X, MODE, AS, OUTER, INDEX) \
REGNO_OK_FOR_BASE_STRICT_P (X, MODE, OUTER, INDEX)
#else
#define REGNO_MODE_CODE_OK_FOR_BASE_P(X, MODE, AS, OUTER, INDEX) \
REGNO_OK_FOR_BASE_NONSTRICT_P (X, MODE, OUTER, INDEX)
#endif
#define REGNO_OK_FOR_INDEX_P(X) 0
/* The same information, inverted:
Return the class number of the smallest class containing
reg number REGNO. This could be a conditional expression
or could index an array. */
#define REGNO_REG_CLASS(REGNO) \
((REGNO) == REG_R0 ? D0REGS \
: (REGNO) == REG_R1 ? D1REGS \
: (REGNO) == REG_R2 ? D2REGS \
: (REGNO) == REG_R3 ? D3REGS \
: (REGNO) == REG_R4 ? D4REGS \
: (REGNO) == REG_R5 ? D5REGS \
: (REGNO) == REG_R6 ? D6REGS \
: (REGNO) == REG_R7 ? D7REGS \
: (REGNO) == REG_P0 ? P0REGS \
: (REGNO) < REG_I0 ? PREGS \
: (REGNO) == REG_ARGP ? PREGS \
: (REGNO) >= REG_I0 && (REGNO) <= REG_I3 ? IREGS \
: (REGNO) >= REG_L0 && (REGNO) <= REG_L3 ? LREGS \
: (REGNO) >= REG_B0 && (REGNO) <= REG_B3 ? BREGS \
: (REGNO) >= REG_M0 && (REGNO) <= REG_M3 ? MREGS \
: (REGNO) == REG_A0 || (REGNO) == REG_A1 ? AREGS \
: (REGNO) == REG_LT0 || (REGNO) == REG_LT1 ? LT_REGS \
: (REGNO) == REG_LC0 || (REGNO) == REG_LC1 ? LC_REGS \
: (REGNO) == REG_LB0 || (REGNO) == REG_LB1 ? LB_REGS \
: (REGNO) == REG_CC ? CCREGS \
: (REGNO) >= REG_RETS ? PROLOGUE_REGS \
: NO_REGS)
/* When this hook returns true for MODE, the compiler allows
registers explicitly used in the rtl to be used as spill registers
but prevents the compiler from extending the lifetime of these
registers. */
#define TARGET_SMALL_REGISTER_CLASSES_FOR_MODE_P hook_bool_mode_true
/* Return the maximum number of consecutive registers
needed to represent mode MODE in a register of class CLASS. */
#define CLASS_MAX_NREGS(CLASS, MODE) \
((MODE) == V2PDImode && (CLASS) == AREGS ? 2 \
: ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD))
/* A C expression that is nonzero if hard register TO can be
considered for use as a rename register for FROM register */
#define HARD_REGNO_RENAME_OK(FROM, TO) bfin_hard_regno_rename_ok (FROM, TO)
/* `PREFERRED_RELOAD_CLASS (X, CLASS)'
A C expression that places additional restrictions on the register
class to use when it is necessary to copy value X into a register
in class CLASS. The value is a register class; perhaps CLASS, or
perhaps another, smaller class. */
#define PREFERRED_RELOAD_CLASS(X, CLASS) \
(GET_CODE (X) == POST_INC \
|| GET_CODE (X) == POST_DEC \
|| GET_CODE (X) == PRE_DEC ? PREGS : (CLASS))
/* Function Calling Conventions. */
/* The type of the current function; normal functions are of type
SUBROUTINE. */
typedef enum {
SUBROUTINE, INTERRUPT_HANDLER, EXCPT_HANDLER, NMI_HANDLER
} e_funkind;
#define FUNCTION_RETURN_REGISTERS { REG_RETS, REG_RETI, REG_RETX, REG_RETN }
#define FUNCTION_ARG_REGISTERS { REG_R0, REG_R1, REG_R2, -1 }
/* Flags for the call/call_value rtl operations set up by function_arg */
#define CALL_NORMAL 0x00000000 /* no special processing */
#define CALL_LONG 0x00000001 /* always call indirect */
#define CALL_SHORT 0x00000002 /* always call by symbol */
typedef struct {
int words; /* # words passed so far */
int nregs; /* # registers available for passing */
int *arg_regs; /* array of register -1 terminated */
int call_cookie; /* Do special things for this call */
} CUMULATIVE_ARGS;
#define FUNCTION_ARG_REGNO_P(REGNO) function_arg_regno_p (REGNO)
/* Initialize a variable CUM of type CUMULATIVE_ARGS
for a call to a function whose data type is FNTYPE.
For a library call, FNTYPE is 0. */
#define INIT_CUMULATIVE_ARGS(CUM,FNTYPE,LIBNAME,INDIRECT, N_NAMED_ARGS) \
(init_cumulative_args (&CUM, FNTYPE, LIBNAME))
/* Define how to find the value returned by a function.
VALTYPE is the data type of the value (as a tree).
If the precise function being called is known, FUNC is its FUNCTION_DECL;
otherwise, FUNC is 0.
*/
#define VALUE_REGNO(MODE) (REG_R0)
#define FUNCTION_VALUE(VALTYPE, FUNC) \
gen_rtx_REG (TYPE_MODE (VALTYPE), \
VALUE_REGNO(TYPE_MODE(VALTYPE)))
/* Define how to find the value returned by a library function
assuming the value has mode MODE. */
#define LIBCALL_VALUE(MODE) gen_rtx_REG (MODE, VALUE_REGNO(MODE))
#define FUNCTION_VALUE_REGNO_P(N) ((N) == REG_R0)
#define DEFAULT_PCC_STRUCT_RETURN 0
/* Before the prologue, the return address is in the RETS register. */
#define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (Pmode, REG_RETS)
#define RETURN_ADDR_RTX(COUNT, FRAME) bfin_return_addr_rtx (COUNT)
#define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (REG_RETS)
/* Call instructions don't modify the stack pointer on the Blackfin. */
#define INCOMING_FRAME_SP_OFFSET 0
/* Describe how we implement __builtin_eh_return. */
#define EH_RETURN_DATA_REGNO(N) ((N) < 2 ? (N) : INVALID_REGNUM)
#define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, REG_P2)
#define EH_RETURN_HANDLER_RTX \
gen_frame_mem (Pmode, plus_constant (Pmode, frame_pointer_rtx, \
UNITS_PER_WORD))
/* Addressing Modes */
/* A number, the maximum number of registers that can appear in a
valid memory address. Note that it is up to you to specify a
value equal to the maximum number that `TARGET_LEGITIMATE_ADDRESS_P'
would ever accept. */
#define MAX_REGS_PER_ADDRESS 1
#define LEGITIMATE_MODE_FOR_AUTOINC_P(MODE) \
(GET_MODE_SIZE (MODE) <= 4 || (MODE) == PDImode)
#define HAVE_POST_INCREMENT 1
#define HAVE_POST_DECREMENT 1
#define HAVE_PRE_DECREMENT 1
/* `LEGITIMATE_PIC_OPERAND_P (X)'
A C expression that is nonzero if X is a legitimate immediate
operand on the target machine when generating position independent
code. You can assume that X satisfies `CONSTANT_P', so you need
not check this. You can also assume FLAG_PIC is true, so you need
not check it either. You need not define this macro if all
constants (including `SYMBOL_REF') can be immediate operands when
generating position independent code. */
#define LEGITIMATE_PIC_OPERAND_P(X) ! SYMBOLIC_CONST (X)
#define SYMBOLIC_CONST(X) \
(GET_CODE (X) == SYMBOL_REF \
|| GET_CODE (X) == LABEL_REF \
|| (GET_CODE (X) == CONST && symbolic_reference_mentioned_p (X)))
/* Max number of bytes we can move from memory to memory
in one reasonably fast instruction. */
#define MOVE_MAX UNITS_PER_WORD
/* If a memory-to-memory move would take MOVE_RATIO or more simple
move-instruction pairs, we will do a cpymem or libcall instead. */
#define MOVE_RATIO(speed) 5
/* STORAGE LAYOUT: target machine storage layout
Define this macro as a C expression which is nonzero if accessing
less than a word of memory (i.e. a `char' or a `short') is no
faster than accessing a word of memory, i.e., if such access
require more than one instruction or if there is no difference in
cost between byte and (aligned) word loads.
When this macro is not defined, the compiler will access a field by
finding the smallest containing object; when it is defined, a
fullword load will be used if alignment permits. Unless bytes
accesses are faster than word accesses, using word accesses is
preferable since it may eliminate subsequent memory access if
subsequent accesses occur to other fields in the same word of the
structure, but to different bytes. */
#define SLOW_BYTE_ACCESS 0
/* Define this if most significant bit is lowest numbered
in instructions that operate on numbered bit-fields. */
#define BITS_BIG_ENDIAN 0
/* Define this if most significant byte of a word is the lowest numbered.
We can't access bytes but if we could we would in the Big Endian order. */
#define BYTES_BIG_ENDIAN 0
/* Define this if most significant word of a multiword number is numbered. */
#define WORDS_BIG_ENDIAN 0
/* Width in bits of a "word", which is the contents of a machine register.
Note that this is not necessarily the width of data type `int';
if using 16-bit ints on a 68000, this would still be 32.
But on a machine with 16-bit registers, this would be 16. */
#define BITS_PER_WORD 32
/* Width of a word, in units (bytes). */
#define UNITS_PER_WORD 4
/* Width in bits of a pointer.
See also the macro `Pmode1' defined below. */
#define POINTER_SIZE 32
/* Allocation boundary (in *bits*) for storing pointers in memory. */
#define POINTER_BOUNDARY 32
/* Allocation boundary (in *bits*) for storing arguments in argument list. */
#define PARM_BOUNDARY 32
/* Boundary (in *bits*) on which stack pointer should be aligned. */
#define STACK_BOUNDARY 32
/* Allocation boundary (in *bits*) for the code of a function. */
#define FUNCTION_BOUNDARY 32
/* Alignment of field after `int : 0' in a structure. */
#define EMPTY_FIELD_BOUNDARY BITS_PER_WORD
/* No data type wants to be aligned rounder than this. */
#define BIGGEST_ALIGNMENT 32
/* Define this if move instructions will actually fail to work
when given unaligned data. */
#define STRICT_ALIGNMENT 1
/* (shell-command "rm c-decl.o stor-layout.o")
* never define PCC_BITFIELD_TYPE_MATTERS
* really cause some alignment problem
*/
#define UNITS_PER_FLOAT ((FLOAT_TYPE_SIZE + BITS_PER_UNIT - 1) / \
BITS_PER_UNIT)
#define UNITS_PER_DOUBLE ((DOUBLE_TYPE_SIZE + BITS_PER_UNIT - 1) / \
BITS_PER_UNIT)
/* what is the 'type' of size_t */
#define SIZE_TYPE "long unsigned int"
/* Define this as 1 if `char' should by default be signed; else as 0. */
#define DEFAULT_SIGNED_CHAR 1
#define FLOAT_TYPE_SIZE BITS_PER_WORD
#define SHORT_TYPE_SIZE 16
#define CHAR_TYPE_SIZE 8
#define INT_TYPE_SIZE 32
#define LONG_TYPE_SIZE 32
#define LONG_LONG_TYPE_SIZE 64
/* Note: Fix this to depend on target switch. -- lev */
/* Note: Try to implement double and force long double. -- tonyko
* #define __DOUBLES_ARE_FLOATS__
* #define DOUBLE_TYPE_SIZE FLOAT_TYPE_SIZE
* #define LONG_DOUBLE_TYPE_SIZE DOUBLE_TYPE_SIZE
* #define DOUBLES_ARE_FLOATS 1
*/
#define DOUBLE_TYPE_SIZE 64
#define LONG_DOUBLE_TYPE_SIZE 64
/* `PROMOTE_MODE (M, UNSIGNEDP, TYPE)'
A macro to update M and UNSIGNEDP when an object whose type is
TYPE and which has the specified mode and signedness is to be
stored in a register. This macro is only called when TYPE is a
scalar type.
On most RISC machines, which only have operations that operate on
a full register, define this macro to set M to `word_mode' if M is
an integer mode narrower than `BITS_PER_WORD'. In most cases,
only integer modes should be widened because wider-precision
floating-point operations are usually more expensive than their
narrower counterparts.
For most machines, the macro definition does not change UNSIGNEDP.
However, some machines, have instructions that preferentially
handle either signed or unsigned quantities of certain modes. For
example, on the DEC Alpha, 32-bit loads from memory and 32-bit add
instructions sign-extend the result to 64 bits. On such machines,
set UNSIGNEDP according to which kind of extension is more
efficient.
Do not define this macro if it would never modify M.*/
#define BFIN_PROMOTE_MODE_P(MODE) \
(!TARGET_DSP && GET_MODE_CLASS (MODE) == MODE_INT \
&& GET_MODE_SIZE (MODE) < UNITS_PER_WORD)
#define PROMOTE_MODE(MODE, UNSIGNEDP, TYPE) \
if (BFIN_PROMOTE_MODE_P(MODE)) \
{ \
if (MODE == QImode) \
UNSIGNEDP = 1; \
else if (MODE == HImode) \
UNSIGNEDP = 0; \
(MODE) = SImode; \
}
/* Describing Relative Costs of Operations */
/* Do not put function addr into constant pool */
#define NO_FUNCTION_CSE 1
/* Specify the machine mode that this machine uses
for the index in the tablejump instruction. */
#define CASE_VECTOR_MODE SImode
#define JUMP_TABLES_IN_TEXT_SECTION flag_pic
/* Define if operations between registers always perform the operation
on the full register even if a narrower mode is specified.
#define WORD_REGISTER_OPERATIONS 1
*/
/* Evaluates to true if A and B are mac flags that can be used
together in a single multiply insn. That is the case if they are
both the same flag not involving M, or if one is a combination of
the other with M. */
#define MACFLAGS_MATCH_P(A, B) \
((A) == (B) \
|| ((A) == MACFLAG_NONE && (B) == MACFLAG_M) \
|| ((A) == MACFLAG_M && (B) == MACFLAG_NONE) \
|| ((A) == MACFLAG_IS && (B) == MACFLAG_IS_M) \
|| ((A) == MACFLAG_IS_M && (B) == MACFLAG_IS))
/* Switch into a generic section. */
#define TARGET_ASM_NAMED_SECTION default_elf_asm_named_section
#define PRINT_OPERAND(FILE, RTX, CODE) print_operand (FILE, RTX, CODE)
#define PRINT_OPERAND_ADDRESS(FILE, RTX) print_address_operand (FILE, RTX)
typedef enum sections {
CODE_DIR,
DATA_DIR,
LAST_SECT_NM
} SECT_ENUM_T;
typedef enum directives {
LONG_CONST_DIR,
SHORT_CONST_DIR,
BYTE_CONST_DIR,
SPACE_DIR,
INIT_DIR,
LAST_DIR_NM
} DIR_ENUM_T;
#define IS_ASM_LOGICAL_LINE_SEPARATOR(C, STR) \
((C) == ';' \
|| ((C) == '|' && (STR)[1] == '|'))
#define TEXT_SECTION_ASM_OP ".text;"
#define DATA_SECTION_ASM_OP ".data;"
#define ASM_APP_ON ""
#define ASM_APP_OFF ""
#define ASM_GLOBALIZE_LABEL1(FILE, NAME) \
do { fputs (".global ", FILE); \
assemble_name (FILE, NAME); \
fputc (';',FILE); \
fputc ('\n',FILE); \
} while (0)
#define ASM_DECLARE_FUNCTION_NAME(FILE,NAME,DECL) \
do { \
fputs (".type ", FILE); \
assemble_name (FILE, NAME); \
fputs (", STT_FUNC", FILE); \
fputc (';',FILE); \
fputc ('\n',FILE); \
ASM_OUTPUT_LABEL(FILE, NAME); \
} while (0)
#define ASM_OUTPUT_LABEL(FILE, NAME) \
do { assemble_name (FILE, NAME); \
fputs (":\n",FILE); \
} while (0)
#define ASM_OUTPUT_LABELREF(FILE,NAME) \
do { fprintf (FILE, "_%s", NAME); \
} while (0)
#define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \
do { char __buf[256]; \
fprintf (FILE, "\t.dd\t"); \
ASM_GENERATE_INTERNAL_LABEL (__buf, "L", VALUE); \
assemble_name (FILE, __buf); \
fputc (';', FILE); \
fputc ('\n', FILE); \
} while (0)
#define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \
MY_ASM_OUTPUT_ADDR_DIFF_ELT(FILE, VALUE, REL)
#define MY_ASM_OUTPUT_ADDR_DIFF_ELT(FILE, VALUE, REL) \
do { \
char __buf[256]; \
fprintf (FILE, "\t.dd\t"); \
ASM_GENERATE_INTERNAL_LABEL (__buf, "L", VALUE); \
assemble_name (FILE, __buf); \
fputs (" - ", FILE); \
ASM_GENERATE_INTERNAL_LABEL (__buf, "L", REL); \
assemble_name (FILE, __buf); \
fputc (';', FILE); \
fputc ('\n', FILE); \
} while (0)
#define ASM_OUTPUT_ALIGN(FILE,LOG) \
do { \
if ((LOG) != 0) \
fprintf (FILE, "\t.align %d\n", 1 << (LOG)); \
} while (0)
#define ASM_OUTPUT_SKIP(FILE,SIZE) \
do { \
asm_output_skip (FILE, SIZE); \
} while (0)
#define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE, ROUNDED) \
do { \
switch_to_section (data_section); \
if ((SIZE) >= (unsigned int) 4 ) ASM_OUTPUT_ALIGN(FILE,2); \
ASM_OUTPUT_SIZE_DIRECTIVE (FILE, NAME, SIZE); \
ASM_OUTPUT_LABEL (FILE, NAME); \
fprintf (FILE, "%s %ld;\n", ASM_SPACE, \
(ROUNDED) > (unsigned int) 1 ? (ROUNDED) : 1); \
} while (0)
#define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \
do { \
ASM_GLOBALIZE_LABEL1(FILE,NAME); \
ASM_OUTPUT_LOCAL (FILE, NAME, SIZE, ROUNDED); } while(0)
#define ASM_COMMENT_START "//"
#define PROFILE_BEFORE_PROLOGUE
#define FUNCTION_PROFILER(FILE, LABELNO) \
do { \
fprintf (FILE, "\t[--SP] = RETS;\n"); \
if (TARGET_LONG_CALLS) \
{ \
fprintf (FILE, "\tP2.h = __mcount;\n"); \
fprintf (FILE, "\tP2.l = __mcount;\n"); \
fprintf (FILE, "\tCALL (P2);\n"); \
} \
else \
fprintf (FILE, "\tCALL __mcount;\n"); \
fprintf (FILE, "\tRETS = [SP++];\n"); \
} while(0)
#undef NO_PROFILE_COUNTERS
#define NO_PROFILE_COUNTERS 1
#define ASM_OUTPUT_REG_PUSH(FILE, REGNO) fprintf (FILE, "\t[--SP] = %s;\n", reg_names[REGNO])
#define ASM_OUTPUT_REG_POP(FILE, REGNO) fprintf (FILE, "\t%s = [SP++];\n", reg_names[REGNO])
extern rtx bfin_cc_rtx, bfin_rets_rtx;
/* This works for GAS and some other assemblers. */
#define SET_ASM_OP ".set "
/* Debugger register number for a given compiler register number */
#define DEBUGGER_REGNO(REGNO) (REGNO)
#define SIZE_ASM_OP "\t.size\t"
extern int splitting_for_sched, splitting_loops;
#define PRINT_OPERAND_PUNCT_VALID_P(CHAR) ((CHAR) == '!')
#ifndef TARGET_SUPPORTS_SYNC_CALLS
#define TARGET_SUPPORTS_SYNC_CALLS 0
#endif
struct bfin_cpu
{
const char *name;
bfin_cpu_t type;
int si_revision;
unsigned int workarounds;
};
extern const struct bfin_cpu bfin_cpus[];
#endif /* _BFIN_CONFIG */