| # SPDX-License-Identifier: GPL-3.0-or-later |
| # GCC target-specific configuration file. |
| # Copyright (C) 1997-2022 Free Software Foundation, Inc. |
| |
| #This file is part of GCC. |
| |
| #GCC is free software; you can redistribute it and/or modify it under |
| #the terms of the GNU General Public License as published by the Free |
| #Software Foundation; either version 3, or (at your option) any later |
| #version. |
| |
| #GCC is distributed in the hope that it will be useful, but WITHOUT |
| #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| #for more details. |
| |
| #You should have received a copy of the GNU General Public License |
| #along with GCC; see the file COPYING3. If not see |
| #<http://www.gnu.org/licenses/>. |
| |
| # This is the GCC target-specific configuration file |
| # where a configuration type is mapped to different system-specific |
| # definitions and files. This is invoked by the autoconf-generated |
| # configure script. Putting it in a separate shell file lets us skip |
| # running autoconf when modifying target-specific information. |
| |
| # When you change the cases in the OS or target switches, consider |
| # updating ../libgcc/config.host also. |
| |
| # This file switches on the shell variable ${target}, and also uses the |
| # following shell variables: |
| # |
| # with_* Various variables as set by configure. |
| # |
| # enable_threads Either the name, yes or no depending on whether |
| # threads support was requested. |
| # |
| # default_use_cxa_atexit |
| # The default value for the $enable___cxa_atexit |
| # variable. enable___cxa_atexit needs to be set to |
| # "yes" for the correct operation of C++ destructors |
| # but it relies upon the presence of a non-standard C |
| # library function called __cxa_atexit. |
| # Since not all C libraries provide __cxa_atexit the |
| # default value of $default_use_cxa_atexit is set to |
| # "no" except for targets which are known to be OK. |
| # |
| # default_gnu_indirect_function |
| # The default value for the $enable_gnu_indirect_function |
| # variable. enable_gnu_indirect_function relies |
| # upon the presence of a non-standard gnu ifunc support |
| # in the assembler, linker and dynamic linker. |
| # Since not all libraries provide the dynamic linking |
| # support, the default value of |
| # $default_gnu_indirect_function is set to |
| # "no" except for targets which are known to be OK. |
| # |
| # gas_flag Either yes or no depending on whether GNU as was |
| # requested. |
| # |
| # gnu_ld_flag Either yes or no depending on whether GNU ld was |
| # requested. |
| |
| # This file sets the following shell variables for use by the |
| # autoconf-generated configure script: |
| # |
| # cpu_type The name of the cpu, if different from the first |
| # chunk of the canonical target name. |
| # |
| # tm_defines List of target macros to define for all compilations. |
| # |
| # tm_file A list of target macro files, if different from |
| # "$cpu_type/$cpu_type.h". Usually it's constructed |
| # per target in a way like this: |
| # tm_file="${tm_file} dbxelf.h elfos.h ${cpu_type.h}/elf.h" |
| # Note that the preferred order is: |
| # - specific target header "${cpu_type}/${cpu_type.h}" |
| # - generic headers like dbxelf.h elfos.h, etc. |
| # - specializing target headers like ${cpu_type.h}/elf.h |
| # This helps to keep OS specific stuff out of the CPU |
| # defining header ${cpu_type}/${cpu_type.h}. |
| # |
| # It is possible to include automatically-generated |
| # build-directory files by prefixing them with "./". |
| # All other files should relative to $srcdir/config. |
| # |
| # tm_p_file Location of file with declarations for functions |
| # in $out_file. |
| # |
| # tm_d_file A list of headers with definitions of target hook |
| # macros for the D compiler. |
| # |
| # out_file The name of the machine description C support |
| # file, if different from "$cpu_type/$cpu_type.c". |
| # |
| # common_out_file The name of the source file for code shared between |
| # the compiler proper and the driver. |
| # |
| # md_file The name of the machine-description file, if |
| # different from "$cpu_type/$cpu_type.md". |
| # |
| # tmake_file A list of machine-description-specific |
| # makefile-fragments, if different from |
| # "$cpu_type/t-$cpu_type". |
| # |
| # extra_modes The name of the file containing a list of extra |
| # machine modes, if necessary and different from |
| # "$cpu_type/$cpu_type-modes.def". |
| # |
| # extra_objs List of extra objects that should be linked into |
| # the compiler proper (cc1, cc1obj, cc1plus) |
| # depending on target. |
| # |
| # extra_gcc_objs List of extra objects that should be linked into |
| # the compiler driver (gcc) depending on target. |
| # |
| # extra_headers List of used header files from the directory |
| # config/${cpu_type}. |
| # |
| # user_headers_inc_next_pre |
| # List of header file names of internal gcc header |
| # files, which should be prefixed by an include_next. |
| # user_headers_inc_next_post |
| # List of header file names of internal gcc header |
| # files, which should be postfixed by an include_next. |
| # use_gcc_tgmath If set, add tgmath.h to the list of used header |
| # files. |
| # |
| # use_gcc_stdint If "wrap", install a version of stdint.h that |
| # wraps the system's copy for hosted compilations; |
| # if "provide", provide a version of systems without |
| # such a system header; otherwise "none", do not |
| # provide such a header at all. |
| # |
| # extra_programs List of extra executables compiled for this target |
| # machine, used when linking. |
| # |
| # extra_options List of target-dependent .opt files. |
| # |
| # c_target_objs List of extra target-dependent objects that be |
| # linked into the C compiler only. |
| # |
| # cxx_target_objs List of extra target-dependent objects that be |
| # linked into the C++ compiler only. |
| # |
| # d_target_objs List of extra target-dependent objects that be |
| # linked into the D compiler only. |
| # |
| # fortran_target_objs List of extra target-dependent objects that be |
| # linked into the fortran compiler only. |
| # |
| # target_gtfiles List of extra source files with type information. |
| # |
| # xm_defines List of macros to define when compiling for the |
| # target machine. |
| # |
| # xm_file List of files to include when compiling for the |
| # target machine. |
| # |
| # use_collect2 Set to yes or no, depending on whether collect2 |
| # will be used. |
| # |
| # target_cpu_default Set to override the default target model. |
| # |
| # gdb_needs_out_file_path |
| # Set to yes if gdb needs a dir command with |
| # `dirname $out_file`. |
| # |
| # thread_file Set to control which thread package to use. |
| # |
| # gas Set to yes or no depending on whether the target |
| # system normally uses GNU as. |
| # |
| # configure_default_options |
| # Set to an initializer for configure_default_options |
| # in configargs.h, based on --with-cpu et cetera. |
| # |
| # native_system_header_dir |
| # Where system header files are found for this |
| # target. This defaults to /usr/include. If |
| # the --with-sysroot configure option or the |
| # --sysroot command line option is used this |
| # will be relative to the sysroot. |
| # target_type_format_char |
| # The default character to be used for formatting |
| # the attribute in a |
| # .type symbol_name, ${t_t_f_c}<property> |
| # directive. |
| |
| # The following variables are used in each case-construct to build up the |
| # outgoing variables: |
| # |
| # gnu_ld Set to yes or no depending on whether the target |
| # system normally uses GNU ld. |
| # |
| # target_has_targetcm Set to yes or no depending on whether the target |
| # has its own definition of targetcm. |
| # |
| # target_has_targetm_common Set to yes or no depending on whether the |
| # target has its own definition of targetm_common. |
| # |
| # target_has_targetdm Set to yes or no depending on whether the target |
| # has its own definition of targetdm. |
| |
| out_file= |
| common_out_file= |
| tmake_file= |
| extra_headers= |
| user_headers_inc_next_pre= |
| user_headers_inc_next_post= |
| use_gcc_tgmath=yes |
| use_gcc_stdint=none |
| extra_programs= |
| extra_objs= |
| extra_gcc_objs= |
| extra_options= |
| c_target_objs= |
| cxx_target_objs= |
| d_target_objs= |
| fortran_target_objs= |
| target_has_targetcm=no |
| target_has_targetm_common=yes |
| target_has_targetdm=no |
| tm_defines= |
| xm_defines= |
| # Set this to force installation and use of collect2. |
| use_collect2= |
| # Set this to override the default target model. |
| target_cpu_default= |
| # Set this if gdb needs a dir command with `dirname $out_file` |
| gdb_needs_out_file_path= |
| # Set this to control which thread package will be used. |
| thread_file= |
| # Reinitialize these from the flag values every loop pass, since some |
| # configure entries modify them. |
| gas="$gas_flag" |
| gnu_ld="$gnu_ld_flag" |
| default_use_cxa_atexit=no |
| default_gnu_indirect_function=no |
| target_gtfiles= |
| need_64bit_isa= |
| native_system_header_dir=/usr/include |
| target_type_format_char='@' |
| |
| # Don't carry these over build->host->target. Please. |
| xm_file= |
| md_file= |
| |
| # Obsolete configurations. |
| case ${target} in |
| cr16-*-* \ |
| | hppa[12]*-*-hpux10* \ |
| | hppa[12]*-*-hpux11* \ |
| | m32c-*-rtems* \ |
| ) |
| if test "x$enable_obsolete" != xyes; then |
| echo "*** Configuration ${target} is obsolete." >&2 |
| echo "*** Specify --enable-obsolete to build it anyway." >&2 |
| echo "*** Support will be REMOVED in the next major release of GCC," >&2 |
| echo "*** unless a maintainer comes forward." >&2 |
| exit 1 |
| fi;; |
| esac |
| |
| # Unsupported targets list. Do not put an entry in this list unless |
| # it would otherwise be caught by a more permissive pattern. The list |
| # should be in alphabetical order. |
| case ${target} in |
| # Avoid special cases that are not obsolete |
| arm*-*-*eabi* \ |
| ) |
| ;; |
| arm*-wince-pe* \ |
| | arm*-*-ecos-elf \ |
| | arm*-*-elf \ |
| | arm*-*-linux* \ |
| | arm*-*-uclinux* \ |
| | cris-*-linux* \ |
| | crisv32-*-* \ |
| | i[34567]86-go32-* \ |
| | i[34567]86-*-go32* \ |
| | m32r-*-linux* \ |
| | m32rle-*-linux* \ |
| | m68k*-*-openbsd* \ |
| | m68k-*-uclinuxoldabi* \ |
| | mips64orion*-*-rtems* \ |
| | pdp11-*-bsd \ |
| | powerpc*-*-linux*paired* \ |
| | powerpc*-*-*spe* \ |
| | sparc-hal-solaris2* \ |
| | spu*-*-* \ |
| | thumb-*-* \ |
| | *-*-freebsd[12] | *-*-freebsd[1234].* \ |
| | *-*-freebsd*aout* \ |
| | *-*-linux*aout* \ |
| | *-*-linux*coff* \ |
| | *-*-linux*libc1* \ |
| | *-*-linux*oldld* \ |
| | *-*-rtemsaout* \ |
| | *-*-rtemscoff* \ |
| | *-*-solaris2 \ |
| | *-*-solaris2.[0-9] \ |
| | *-*-solaris2.[0-9].* \ |
| | *-*-solaris2.10* \ |
| | *-*-sysv* \ |
| | vax-*-vms* \ |
| ) |
| echo "*** Configuration ${target} not supported" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be |
| # updated in each machine entry. Also set default extra_headers for some |
| # machines. |
| tm_p_file= |
| cpu_type=`echo ${target} | sed 's/-.*$//'` |
| cpu_is_64bit= |
| case ${target} in |
| m32c*-*-*) |
| cpu_type=m32c |
| tmake_file=m32c/t-m32c |
| target_has_targetm_common=no |
| ;; |
| aarch64*-*-*) |
| cpu_type=aarch64 |
| extra_headers="arm_fp16.h arm_neon.h arm_bf16.h arm_acle.h arm_sve.h" |
| c_target_objs="aarch64-c.o" |
| cxx_target_objs="aarch64-c.o" |
| d_target_objs="aarch64-d.o" |
| extra_objs="aarch64-builtins.o aarch-common.o aarch64-sve-builtins.o aarch64-sve-builtins-shapes.o aarch64-sve-builtins-base.o aarch64-sve-builtins-sve2.o cortex-a57-fma-steering.o aarch64-speculation.o falkor-tag-collision-avoidance.o aarch64-bti-insert.o aarch64-cc-fusion.o" |
| target_gtfiles="\$(srcdir)/config/aarch64/aarch64-builtins.cc \$(srcdir)/config/aarch64/aarch64-sve-builtins.h \$(srcdir)/config/aarch64/aarch64-sve-builtins.cc" |
| target_has_targetm_common=yes |
| ;; |
| alpha*-*-*) |
| cpu_type=alpha |
| extra_options="${extra_options} g.opt" |
| ;; |
| amdgcn*) |
| cpu_type=gcn |
| use_gcc_stdint=wrap |
| ;; |
| am33_2.0-*-linux*) |
| cpu_type=mn10300 |
| ;; |
| arc*-*-*) |
| cpu_type=arc |
| c_target_objs="arc-c.o" |
| cxx_target_objs="arc-c.o" |
| extra_options="${extra_options} arc/arc-tables.opt g.opt" |
| extra_headers="arc-simd.h" |
| ;; |
| arm*-*-*) |
| cpu_type=arm |
| extra_objs="arm-builtins.o arm-mve-builtins.o aarch-common.o" |
| extra_headers="mmintrin.h arm_neon.h arm_acle.h arm_fp16.h arm_cmse.h arm_bf16.h arm_mve_types.h arm_mve.h arm_cde.h" |
| target_type_format_char='%' |
| c_target_objs="arm-c.o" |
| cxx_target_objs="arm-c.o" |
| d_target_objs="arm-d.o" |
| extra_options="${extra_options} arm/arm-tables.opt" |
| target_gtfiles="\$(srcdir)/config/arm/arm-builtins.cc \$(srcdir)/config/arm/arm-mve-builtins.h \$(srcdir)/config/arm/arm-mve-builtins.cc" |
| ;; |
| avr-*-*) |
| cpu_type=avr |
| c_target_objs="avr-c.o" |
| cxx_target_objs="avr-c.o" |
| ;; |
| bfin*-*) |
| cpu_type=bfin |
| ;; |
| bpf-*-*) |
| cpu_type=bpf |
| ;; |
| frv*) cpu_type=frv |
| extra_options="${extra_options} g.opt" |
| ;; |
| ft32*) cpu_type=ft32 |
| target_has_targetm_common=no |
| ;; |
| moxie*) cpu_type=moxie |
| target_has_targetm_common=no |
| ;; |
| fido-*-*) |
| cpu_type=m68k |
| extra_headers=math-68881.h |
| extra_options="${extra_options} m68k/m68k-tables.opt" |
| ;; |
| i[34567]86-*-* | x86_64-*-*) |
| cpu_type=i386 |
| c_target_objs="i386-c.o" |
| cxx_target_objs="i386-c.o" |
| d_target_objs="i386-d.o" |
| extra_objs="x86-tune-sched.o x86-tune-sched-bd.o x86-tune-sched-atom.o x86-tune-sched-core.o i386-options.o i386-builtins.o i386-expand.o i386-features.o" |
| target_gtfiles="\$(srcdir)/config/i386/i386-builtins.cc \$(srcdir)/config/i386/i386-expand.cc \$(srcdir)/config/i386/i386-options.cc" |
| extra_options="${extra_options} fused-madd.opt" |
| extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h |
| pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h |
| nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h |
| immintrin.h x86intrin.h avxintrin.h xopintrin.h |
| ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h |
| lzcntintrin.h bmiintrin.h bmi2intrin.h tbmintrin.h |
| avx2intrin.h avx512fintrin.h fmaintrin.h f16cintrin.h |
| rtmintrin.h xtestintrin.h rdseedintrin.h prfchwintrin.h |
| adxintrin.h fxsrintrin.h xsaveintrin.h xsaveoptintrin.h |
| avx512cdintrin.h avx512erintrin.h avx512pfintrin.h |
| shaintrin.h clflushoptintrin.h xsavecintrin.h |
| xsavesintrin.h avx512dqintrin.h avx512bwintrin.h |
| avx512vlintrin.h avx512vlbwintrin.h avx512vldqintrin.h |
| avx512ifmaintrin.h avx512ifmavlintrin.h avx512vbmiintrin.h |
| avx512vbmivlintrin.h avx5124fmapsintrin.h avx5124vnniwintrin.h |
| avx512vpopcntdqintrin.h clwbintrin.h mwaitxintrin.h |
| clzerointrin.h pkuintrin.h sgxintrin.h cetintrin.h |
| gfniintrin.h cet.h avx512vbmi2intrin.h |
| avx512vbmi2vlintrin.h avx512vnniintrin.h |
| avx512vnnivlintrin.h vaesintrin.h vpclmulqdqintrin.h |
| avx512vpopcntdqvlintrin.h avx512bitalgintrin.h |
| pconfigintrin.h wbnoinvdintrin.h movdirintrin.h |
| waitpkgintrin.h cldemoteintrin.h avx512bf16vlintrin.h |
| avx512bf16intrin.h enqcmdintrin.h serializeintrin.h |
| avx512vp2intersectintrin.h avx512vp2intersectvlintrin.h |
| tsxldtrkintrin.h amxtileintrin.h amxint8intrin.h |
| amxbf16intrin.h x86gprintrin.h uintrintrin.h |
| hresetintrin.h keylockerintrin.h avxvnniintrin.h |
| mwaitintrin.h avx512fp16intrin.h avx512fp16vlintrin.h" |
| ;; |
| ia64-*-*) |
| extra_headers=ia64intrin.h |
| extra_options="${extra_options} g.opt fused-madd.opt" |
| ;; |
| hppa*-*-*) |
| cpu_type=pa |
| ;; |
| lm32*) |
| extra_options="${extra_options} g.opt" |
| ;; |
| m32r*-*-*) |
| cpu_type=m32r |
| extra_options="${extra_options} g.opt" |
| ;; |
| m68k-*-*) |
| extra_headers=math-68881.h |
| extra_options="${extra_options} m68k/m68k-tables.opt" |
| ;; |
| microblaze*-*-*) |
| cpu_type=microblaze |
| extra_options="${extra_options} g.opt" |
| ;; |
| mips*-*-*) |
| cpu_type=mips |
| d_target_objs="mips-d.o" |
| extra_headers="loongson.h loongson-mmiintrin.h msa.h" |
| extra_objs="frame-header-opt.o" |
| extra_options="${extra_options} g.opt fused-madd.opt mips/mips-tables.opt" |
| ;; |
| loongarch*-*-*) |
| cpu_type=loongarch |
| extra_headers="larchintrin.h" |
| extra_objs="loongarch-c.o loongarch-builtins.o loongarch-cpu.o loongarch-opts.o loongarch-def.o" |
| extra_gcc_objs="loongarch-driver.o loongarch-cpu.o loongarch-opts.o loongarch-def.o" |
| extra_options="${extra_options} g.opt fused-madd.opt" |
| ;; |
| nds32*) |
| cpu_type=nds32 |
| extra_headers="nds32_intrinsic.h nds32_isr.h nds32_init.inc" |
| case ${target} in |
| nds32*-*-linux*) |
| extra_options="${extra_options} nds32/nds32-linux.opt" |
| ;; |
| nds32*-*-elf*) |
| extra_options="${extra_options} nds32/nds32-elf.opt" |
| ;; |
| *) |
| ;; |
| esac |
| extra_objs="nds32-cost.o nds32-intrinsic.o nds32-isr.o nds32-md-auxiliary.o nds32-pipelines-auxiliary.o nds32-predicates.o nds32-memory-manipulation.o nds32-fp-as-gp.o nds32-relax-opt.o nds32-utils.o" |
| ;; |
| nios2-*-*) |
| cpu_type=nios2 |
| extra_options="${extra_options} g.opt" |
| ;; |
| nvptx-*-*) |
| cpu_type=nvptx |
| c_target_objs="nvptx-c.o" |
| cxx_target_objs="nvptx-c.o" |
| extra_options="${extra_options} nvptx/nvptx-gen.opt" |
| ;; |
| or1k*-*-*) |
| cpu_type=or1k |
| ;; |
| powerpc*-*-*) |
| cpu_type=rs6000 |
| extra_objs="rs6000-string.o rs6000-p8swap.o rs6000-logue.o" |
| extra_objs="${extra_objs} rs6000-call.o rs6000-pcrel-opt.o" |
| extra_objs="${extra_objs} rs6000-builtins.o rs6000-builtin.o" |
| extra_headers="ppc-asm.h altivec.h htmintrin.h htmxlintrin.h" |
| extra_headers="${extra_headers} bmi2intrin.h bmiintrin.h" |
| extra_headers="${extra_headers} xmmintrin.h mm_malloc.h emmintrin.h" |
| extra_headers="${extra_headers} mmintrin.h x86intrin.h" |
| extra_headers="${extra_headers} pmmintrin.h tmmintrin.h smmintrin.h" |
| extra_headers="${extra_headers} nmmintrin.h immintrin.h x86gprintrin.h" |
| extra_headers="${extra_headers} ppu_intrinsics.h spu2vmx.h vec_types.h si2vmx.h" |
| extra_headers="${extra_headers} amo.h" |
| case x$with_cpu in |
| xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456789]|xpower10|xpower6x|xrs64a|xcell|xa2|xe500mc64|xe5500|xe6500) |
| cpu_is_64bit=yes |
| ;; |
| esac |
| extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt" |
| target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-logue.cc \$(srcdir)/config/rs6000/rs6000-call.cc" |
| target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-pcrel-opt.cc" |
| target_gtfiles="$target_gtfiles ./rs6000-builtins.h" |
| ;; |
| pru-*-*) |
| cpu_type=pru |
| ;; |
| riscv*) |
| cpu_type=riscv |
| extra_objs="riscv-builtins.o riscv-c.o riscv-sr.o riscv-shorten-memrefs.o" |
| d_target_objs="riscv-d.o" |
| ;; |
| rs6000*-*-*) |
| extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt" |
| extra_objs="rs6000-string.o rs6000-p8swap.o rs6000-logue.o" |
| extra_objs="${extra_objs} rs6000-call.o rs6000-pcrel-opt.o" |
| target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-logue.cc \$(srcdir)/config/rs6000/rs6000-call.cc" |
| target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-pcrel-opt.cc" |
| ;; |
| sparc*-*-*) |
| cpu_type=sparc |
| c_target_objs="sparc-c.o" |
| cxx_target_objs="sparc-c.o" |
| d_target_objs="sparc-d.o" |
| extra_headers="visintrin.h" |
| ;; |
| s390*-*-*) |
| cpu_type=s390 |
| d_target_objs="s390-d.o" |
| extra_options="${extra_options} fused-madd.opt" |
| extra_headers="s390intrin.h htmintrin.h htmxlintrin.h vecintrin.h" |
| ;; |
| # Note the 'l'; we need to be able to match e.g. "shle" or "shl". |
| sh[123456789lbe]*-*-* | sh-*-*) |
| cpu_type=sh |
| extra_options="${extra_options} fused-madd.opt" |
| extra_objs="${extra_objs} sh_treg_combine.o sh-mem.o sh_optimize_sett_clrt.o" |
| ;; |
| v850*-*-*) |
| cpu_type=v850 |
| ;; |
| tic6x-*-*) |
| cpu_type=c6x |
| extra_headers="c6x_intrinsics.h" |
| extra_options="${extra_options} c6x/c6x-tables.opt" |
| ;; |
| xtensa*-*-*) |
| extra_options="${extra_options} fused-madd.opt" |
| ;; |
| esac |
| |
| tm_file=${cpu_type}/${cpu_type}.h |
| tm_d_file=${cpu_type}/${cpu_type}.h |
| if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h |
| then |
| tm_p_file=${cpu_type}/${cpu_type}-protos.h |
| tm_d_file="${tm_d_file} ${cpu_type}/${cpu_type}-protos.h" |
| fi |
| |
| extra_modes= |
| if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def |
| then |
| extra_modes=${cpu_type}/${cpu_type}-modes.def |
| fi |
| if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt |
| then |
| extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt" |
| fi |
| |
| case ${target} in |
| aarch64*-*-*) |
| tm_p_file="${tm_p_file} arm/aarch-common-protos.h" |
| case ${with_abi} in |
| "") |
| if test "x$with_multilib_list" = xilp32; then |
| tm_file="aarch64/biarchilp32.h ${tm_file}" |
| else |
| tm_file="aarch64/biarchlp64.h ${tm_file}" |
| fi |
| ;; |
| ilp32) |
| tm_file="aarch64/biarchilp32.h ${tm_file}" |
| ;; |
| lp64) |
| tm_file="aarch64/biarchlp64.h ${tm_file}" |
| ;; |
| *) |
| echo "Unknown ABI used in --with-abi=$with_abi" |
| exit 1 |
| esac |
| ;; |
| i[34567]86-*-*) |
| if test "x$with_abi" != x; then |
| echo "This target does not support --with-abi." |
| exit 1 |
| fi |
| ;; |
| x86_64-*-darwin*) |
| ;; |
| x86_64-*-*) |
| case ${with_abi} in |
| "") |
| if test "x$with_multilib_list" = xmx32; then |
| tm_file="i386/biarchx32.h ${tm_file}" |
| else |
| tm_file="i386/biarch64.h ${tm_file}" |
| fi |
| ;; |
| 64 | m64) |
| tm_file="i386/biarch64.h ${tm_file}" |
| ;; |
| x32 | mx32) |
| tm_file="i386/biarchx32.h ${tm_file}" |
| ;; |
| *) |
| echo "Unknown ABI used in --with-abi=$with_abi" |
| exit 1 |
| esac |
| ;; |
| arm*-*-*) |
| tm_p_file="arm/arm-flags.h ${tm_p_file} arm/aarch-common-protos.h" |
| ;; |
| esac |
| |
| # On a.out targets, we need to use collect2. |
| case ${target} in |
| *-*-*aout*) |
| use_collect2=yes |
| ;; |
| esac |
| |
| # Common C libraries. |
| tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3 LIBC_MUSL=4" |
| |
| # 32-bit x86 processors supported by --with-arch=. Each processor |
| # MUST be separated by exactly one space. |
| x86_archs="athlon athlon-4 athlon-fx athlon-mp athlon-tbird \ |
| athlon-xp k6 k6-2 k6-3 geode c3 c3-2 winchip-c6 winchip2 i386 i486 \ |
| i586 i686 pentium pentium-m pentium-mmx pentium2 pentium3 pentium3m \ |
| pentium4 pentium4m pentiumpro prescott lakemont samuel-2 nehemiah \ |
| c7 esther" |
| |
| # 64-bit x86 processors supported by --with-arch=. Each processor |
| # MUST be separated by exactly one space. |
| x86_64_archs="amdfam10 athlon64 athlon64-sse3 barcelona bdver1 bdver2 \ |
| bdver3 bdver4 znver1 znver2 znver3 btver1 btver2 k8 k8-sse3 opteron \ |
| opteron-sse3 nocona core2 corei7 corei7-avx core-avx-i core-avx2 atom \ |
| slm nehalem westmere sandybridge ivybridge haswell broadwell bonnell \ |
| silvermont knl knm skylake-avx512 cannonlake icelake-client icelake-server \ |
| skylake goldmont goldmont-plus tremont cascadelake tigerlake cooperlake \ |
| sapphirerapids alderlake rocketlake eden-x2 nano nano-1000 nano-2000 nano-3000 \ |
| nano-x2 eden-x4 nano-x4 lujiazui x86-64 x86-64-v2 x86-64-v3 x86-64-v4 native" |
| |
| # Additional x86 processors supported by --with-cpu=. Each processor |
| # MUST be separated by exactly one space. |
| x86_cpus="generic intel" |
| |
| # Common parts for widely ported systems. |
| case ${target} in |
| *-*-darwin*) |
| tmake_file="t-darwin " |
| tm_file="${tm_file} darwin.h" |
| tm_d_file="${tm_d_file} tm-dwarf2.h" |
| darwin_os=`echo ${target} | sed 's/.*darwin\([0-9.]*\).*$/\1/'` |
| darwin_maj=`expr "$darwin_os" : '\([0-9]*\).*'` |
| macos_min=`expr "$darwin_os" : '[0-9]*\.\([0-9]*\).*'` |
| macos_maj=10 |
| if test x"${macos_min}" = x; then |
| macos_min=0 |
| fi |
| def_ld64=85.2 |
| # Tools hosted on earlier versions of Darwin constrained all object |
| # alignment to be 2^15 or smaller. From Darwin11 (macOS 10.7) the |
| # alignment of non-common is allowed to be up to 2^28. Note that the |
| #Â larger alignment is permitted when targeting 10.6 from 10.7 so that |
| #Â the constraint only need be applied per host (and only if the host |
| # is Darwin). |
| case ${host} in |
| *-*-darwin[4-9]* | *-*-darwin10*) |
| tm_defines="$tm_defines L2_MAX_OFILE_ALIGNMENT=15U" |
| ;; |
| *) |
| tm_defines="$tm_defines L2_MAX_OFILE_ALIGNMENT=28U" |
| ;; |
| esac |
| case ${target} in |
| # Darwin 4 to 19 correspond to macOS 10.0 to 10.15 |
| *-*-darwin[4-9]* | *-*-darwin1[0-9]*) |
| macos_min=`expr $darwin_maj - 4` |
| ;; |
| *-*-darwin2*) |
| # Darwin 20 corresponds to macOS 11, Darwin 21 to macOS 12. |
| macos_maj=`expr $darwin_maj - 9` |
| def_ld64=609.0 |
| ;; |
| *-*-darwin) |
| case ${cpu_type} in |
| aarch64) macos_maj=11 ;; |
| x86_64) macos_min=6 ;; |
| *) macos_min=5 ;; |
| esac |
| case ${host} in |
| *-*-darwin*) tm_defines="$tm_defines DARWIN_USE_KERNEL_VERS" ;; |
| *) |
| # If configuring a cross-compiler then we will have set some |
| #Â default above, but it is probably not what was intended. |
| echo "Warning: Using ${target} is only suitable for Darwin hosts" 1>&2 |
| echo "configure with an explicit target version" 1>&2 |
| ;; |
| esac |
| ;; |
| *) |
| echo "Error: configuring for an unreleased macOS version ${target}" 1>&2 |
| exit 1 |
| ;; |
| esac |
| tm_defines="$tm_defines DEF_MIN_OSX_VERSION=\\\"${macos_maj}.${macos_min}\\\"" |
| tm_defines="$tm_defines DEF_LD64=\\\"${def_ld64}\\\"" |
| tm_file="${tm_file} ${cpu_type}/darwin.h" |
| tm_p_file="${tm_p_file} darwin-protos.h" |
| target_gtfiles="$target_gtfiles \$(srcdir)/config/darwin.cc" |
| extra_options="${extra_options} rpath.opt darwin.opt" |
| c_target_objs="${c_target_objs} darwin-c.o" |
| cxx_target_objs="${cxx_target_objs} darwin-c.o" |
| d_target_objs="${d_target_objs} darwin-d.o" |
| fortran_target_objs="darwin-f.o" |
| target_has_targetcm=yes |
| target_has_targetdm=yes |
| extra_objs="${extra_objs} darwin.o" |
| extra_gcc_objs="darwin-driver.o" |
| default_use_cxa_atexit=yes |
| use_gcc_stdint=wrap |
| case ${enable_threads} in |
| "" | yes | posix) thread_file='posix' ;; |
| esac |
| ;; |
| *-*-dragonfly*) |
| gas=yes |
| gnu_ld=yes |
| tmake_file="t-slibgcc" |
| case ${enable_threads} in |
| "" | yes | posix) |
| thread_file='posix' |
| ;; |
| no | single) |
| # Let these non-posix thread selections fall through if requested |
| ;; |
| *) |
| echo 'Unknown thread configuration for DragonFly BSD' |
| exit 1 |
| ;; |
| esac |
| extra_options="$extra_options rpath.opt dragonfly.opt" |
| default_use_cxa_atexit=yes |
| use_gcc_stdint=wrap |
| d_target_objs="${d_target_objs} dragonfly-d.o" |
| tmake_file="${tmake_file} t-dragonfly" |
| target_has_targetdm=yes |
| ;; |
| *-*-freebsd*) |
| # This is the generic ELF configuration of FreeBSD. Later |
| # machine-specific sections may refine and add to this |
| # configuration. |
| # |
| # Due to tm_file entry ordering issues that vary between cpu |
| # architectures, we only define fbsd_tm_file to allow the |
| # machine-specific section to dictate the final order of all |
| # entries of tm_file with the minor exception that components |
| # of the tm_file set here will always be of the form: |
| # |
| # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h |
| # |
| # The machine-specific section should not tamper with this |
| # ordering but may order all other entries of tm_file as it |
| # pleases around the provided core setting. |
| gas=yes |
| gnu_ld=yes |
| fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'` |
| if test "$fbsd_major" = ""; then |
| echo "Specify the major version number of the targeted FreeBSD release" |
| echo "like this: --target=amd64-unknown-freebsd10.1" |
| exit 1 |
| fi |
| tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}" |
| tmake_file="t-slibgcc" |
| case ${enable_threads} in |
| no) |
| fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h" |
| ;; |
| "" | yes | posix) |
| thread_file='posix' |
| ;; |
| *) |
| echo 'Unknown thread configuration for FreeBSD' |
| exit 1 |
| ;; |
| esac |
| fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h" |
| extra_options="$extra_options rpath.opt freebsd.opt" |
| case ${target} in |
| *-*-freebsd[345].*) |
| :;; |
| *) |
| default_use_cxa_atexit=yes;; |
| esac |
| use_gcc_stdint=wrap |
| d_target_objs="${d_target_objs} freebsd-d.o" |
| tmake_file="${tmake_file} t-freebsd" |
| target_has_targetdm=yes |
| ;; |
| *-*-fuchsia*) |
| native_system_header_dir=/include |
| ;; |
| *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu | *-*-uclinuxfdpiceabi) |
| extra_options="$extra_options gnu-user.opt" |
| gas=yes |
| gnu_ld=yes |
| case ${enable_threads} in |
| "" | yes | posix) thread_file='posix' ;; |
| esac |
| tmake_file="t-slibgcc" |
| case $target in |
| *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-kopensolaris*-gnu) |
| :;; |
| *-*-gnu*) |
| native_system_header_dir=/include |
| ;; |
| esac |
| # Linux C libraries selection switch: glibc / uclibc / bionic. |
| # uclibc and bionic aren't usable for GNU/Hurd and neither for GNU/k*BSD. |
| case $target in |
| *linux*) |
| tm_p_file="${tm_p_file} linux-protos.h" |
| tmake_file="${tmake_file} t-linux" |
| extra_objs="${extra_objs} linux.o" |
| extra_options="${extra_options} linux.opt" |
| ;; |
| esac |
| case $target in |
| *-*-*android*) |
| tm_defines="$tm_defines DEFAULT_LIBC=LIBC_BIONIC" |
| ;; |
| *-*-*uclibc* | *-*-uclinuxfdpiceabi) |
| tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC" |
| ;; |
| *-*-*musl*) |
| tm_defines="$tm_defines DEFAULT_LIBC=LIBC_MUSL" |
| ;; |
| *) |
| tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC" |
| ;; |
| esac |
| # Assume that glibc or uClibc or Bionic are being used and so __cxa_atexit |
| # is provided. |
| default_use_cxa_atexit=yes |
| use_gcc_tgmath=no |
| use_gcc_stdint=wrap |
| # Enable compilation for Android by default for *android* targets. |
| case $target in |
| *-*-*android*) |
| tm_defines="$tm_defines ANDROID_DEFAULT=1" |
| ;; |
| *) |
| tm_defines="$tm_defines ANDROID_DEFAULT=0" |
| ;; |
| esac |
| c_target_objs="${c_target_objs} glibc-c.o" |
| cxx_target_objs="${cxx_target_objs} glibc-c.o" |
| d_target_objs="${d_target_objs} glibc-d.o" |
| tmake_file="${tmake_file} t-glibc" |
| target_has_targetcm=yes |
| target_has_targetdm=yes |
| case $target in |
| *-*-*uclibc* | *-*-uclinuxfdpiceabi) |
| ;; |
| *) |
| # Linux targets always support .init_array. |
| gcc_cv_initfini_array=yes |
| ;; |
| esac |
| ;; |
| *-*-netbsd*) |
| tm_p_file="${tm_p_file} netbsd-protos.h" |
| tmake_file="t-netbsd t-slibgcc" |
| extra_objs="${extra_objs} netbsd.o" |
| d_target_objs="${d_target_objs} netbsd-d.o" |
| gas=yes |
| gnu_ld=yes |
| use_gcc_stdint=wrap |
| case ${enable_threads} in |
| "" | yes | posix) thread_file='posix' ;; |
| esac |
| nbsd_tm_file="netbsd.h netbsd-stdint.h netbsd-elf.h" |
| default_use_cxa_atexit=yes |
| target_has_targetdm=yes |
| case ${target} in |
| arm*-* | i[34567]86-* | powerpc*-* | sparc*-* | x86_64-*) |
| default_gnu_indirect_function=yes |
| ;; |
| esac |
| ;; |
| *-*-openbsd*) |
| tmake_file="t-openbsd" |
| case ${enable_threads} in |
| yes) |
| thread_file='posix' |
| ;; |
| esac |
| case ${target} in |
| *-*-openbsd4.[3-9]|*-*-openbsd[5-9]*) |
| default_use_cxa_atexit=yes |
| ;; |
| esac |
| d_target_objs="${d_target_objs} openbsd-d.o" |
| target_has_targetdm=yes |
| ;; |
| *-*-phoenix*) |
| gas=yes |
| gnu_ld=yes |
| default_use_cxa_atexit=yes |
| ;; |
| *-*-rtems*) |
| case ${enable_threads} in |
| "" | yes | rtems) thread_file='rtems' ;; |
| posix) thread_file='posix' ;; |
| no) ;; |
| *) |
| echo 'Unknown thread configuration for RTEMS' |
| exit 1 |
| ;; |
| esac |
| tmake_file="${tmake_file} t-rtems" |
| extra_options="${extra_options} rtems.opt" |
| default_use_cxa_atexit=yes |
| use_gcc_stdint=wrap |
| ;; |
| *-*-uclinux*) |
| extra_options="$extra_options gnu-user.opt" |
| use_gcc_stdint=wrap |
| case ${enable_threads} in |
| "" | yes | posix) thread_file='posix' ;; |
| esac |
| tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC SINGLE_LIBC" |
| ;; |
| *-*-rdos*) |
| use_gcc_stdint=wrap |
| ;; |
| *-*-solaris2*) |
| # i?86-*-solaris2* needs to insert headers between cpu default and |
| # Solaris 2 specific ones. |
| sol2_tm_file_head="dbxelf.h elfos.h ${cpu_type}/sysv4.h" |
| sol2_tm_file_tail="${cpu_type}/sol2.h sol2.h" |
| sol2_tm_file="${sol2_tm_file_head} ${sol2_tm_file_tail}" |
| case ${target} in |
| *-*-solaris2.1[1-9]*) |
| # __cxa_atexit was introduced in Solaris 11.4. |
| default_use_cxa_atexit=yes |
| ;; |
| esac |
| use_gcc_stdint=wrap |
| if test x$gnu_ld = xyes; then |
| tm_file="usegld.h ${tm_file}" |
| fi |
| if test x$gas = xyes; then |
| tm_file="usegas.h ${tm_file}" |
| fi |
| tm_p_file="${tm_p_file} sol2-protos.h" |
| tmake_file="${tmake_file} t-sol2 t-slibgcc" |
| c_target_objs="${c_target_objs} sol2-c.o" |
| cxx_target_objs="${cxx_target_objs} sol2-c.o sol2-cxx.o" |
| d_target_objs="${d_target_objs} sol2-d.o" |
| extra_objs="${extra_objs} sol2.o sol2-stubs.o" |
| extra_options="${extra_options} sol2.opt" |
| case ${enable_threads}:${have_pthread_h}:${have_thread_h} in |
| "":yes:* | yes:yes:* ) |
| thread_file=posix |
| ;; |
| esac |
| target_has_targetdm=yes |
| ;; |
| *-*-*vms*) |
| extra_options="${extra_options} vms/vms.opt" |
| xmake_file=vms/x-vms |
| tmake_file="vms/t-vms t-slibgcc" |
| extra_objs="vms.o" |
| target_gtfiles="$target_gtfiles \$(srcdir)/config/vms/vms.cc" |
| tm_p_file="${tm_p_file} vms/vms-protos.h" |
| xm_file="vms/xm-vms.h" |
| c_target_objs="vms-c.o" |
| cxx_target_objs="vms-c.o" |
| fortran_target_objs="vms-f.o" |
| use_gcc_stdint=provide |
| tm_file="${tm_file} vms/vms-stdint.h" |
| if test x$gnu_ld != xyes; then |
| # Build wrappers for native case. |
| extra_programs="ld\$(exeext) ar\$(exeext)" |
| tmake_file="$tmake_file vms/t-vmsnative" |
| fi |
| ;; |
| *-*-vxworks*) |
| tmake_file=t-vxworks |
| xm_defines=POSIX |
| |
| extra_options="${extra_options} vxworks.opt" |
| extra_objs="$extra_objs vxworks.o" |
| |
| c_target_objs="${c_target_objs} vxworks-c.o" |
| cxx_target_objs="${cxx_target_objs} vxworks-c.o" |
| extra_headers="${extra_headers} ../vxworks/vxworks-predef.h" |
| target_has_targetcm="yes" |
| |
| # This private header exposes a consistent interface for checks on |
| # the VxWorks version our runtime header files need to perform, based on |
| # what the system headers adverstise: |
| |
| extra_headers="${extra_headers} ../vxworks/_vxworks-versions.h" |
| |
| # Starting from VxWorks 7, the system comes with a Dinkumware |
| # environment which requires the inclusion of "yvals.h" before other |
| # system headers. We provide wrapped versions of a few headers to |
| # accomodate such constraints: |
| |
| extra_headers="${extra_headers} ../vxworks/_yvals.h" |
| extra_headers="${extra_headers} ../vxworks/_yvals-wrapper.h" |
| |
| extra_headers="${extra_headers} ../vxworks/math.h ../vxworks/complex.h" |
| extra_headers="${extra_headers} ../vxworks/inttypes.h ../vxworks/setjmp.h" |
| |
| # We provide (a tailored version of) stdint.h |
| tm_file="${tm_file} vxworks-stdint.h" |
| use_gcc_stdint=provide |
| |
| case ${enable_threads} in |
| no) ;; |
| "" | yes | vxworks) thread_file='vxworks' ;; |
| *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;; |
| esac |
| |
| # A few common macro definitions conveying general characteristics |
| # of the configuration at hand. Note that by VxWorks 7, we mean the |
| # the SR6xx major update or beyond in vendor parlance: |
| |
| case $target in |
| *-*-vxworks7*) |
| tm_defines="$tm_defines TARGET_VXWORKS7=1" |
| ;; |
| esac |
| case $target in |
| *64-*-vxworks*) |
| tm_defines="$tm_defines TARGET_VXWORKS64=1" |
| ;; |
| esac |
| |
| # Then a few build configuration controls for VxWorks 7, which |
| # has specificities on top of which we aim to provide more complete |
| # C++ support: |
| |
| case $target in |
| *-*-vxworks7*) |
| # VxWorks 7 always has init/fini_array support and it is simpler to |
| # just leverage this, sticking to what the system toolchain does: |
| gcc_cv_initfini_array=yes |
| ;; |
| esac |
| ;; |
| *-*-elf|arc*-*-elf*) |
| # Assume that newlib is being used and so __cxa_atexit is provided. |
| default_use_cxa_atexit=yes |
| use_gcc_stdint=wrap |
| ;; |
| esac |
| |
| case ${target} in |
| aarch64*-*-elf | aarch64*-*-fuchsia* | aarch64*-*-rtems*) |
| tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h" |
| tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-elf-raw.h" |
| tmake_file="${tmake_file} aarch64/t-aarch64" |
| case $target in |
| aarch64-*-elf*) |
| use_gcc_stdint=wrap |
| ;; |
| aarch64-*-fuchsia*) |
| tm_file="${tm_file} fuchsia.h" |
| ;; |
| aarch64-*-rtems*) |
| tm_file="${tm_file} aarch64/rtems.h rtems.h" |
| ;; |
| esac |
| case $target in |
| aarch64_be-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" |
| ;; |
| esac |
| aarch64_multilibs="${with_multilib_list}" |
| if test "$aarch64_multilibs" = "default"; then |
| aarch64_multilibs="lp64,ilp32" |
| fi |
| aarch64_multilibs=`echo $aarch64_multilibs | sed -e 's/,/ /g'` |
| for aarch64_multilib in ${aarch64_multilibs}; do |
| case ${aarch64_multilib} in |
| ilp32 | lp64 ) |
| TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${aarch64_multilib}" |
| ;; |
| *) |
| echo "--with-multilib-list=${aarch64_multilib} not supported." |
| exit 1 |
| esac |
| done |
| TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'` |
| ;; |
| aarch64*-*-freebsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file}" |
| tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-freebsd.h" |
| tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-freebsd" |
| tm_defines="${tm_defines} TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1" |
| ;; |
| aarch64*-*-netbsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file}" |
| tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-netbsd.h" |
| tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-netbsd" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| ;; |
| aarch64*-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h" |
| tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-linux.h" |
| tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-linux" |
| tm_defines="${tm_defines} TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1" |
| case $target in |
| aarch64_be-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" |
| ;; |
| esac |
| aarch64_multilibs="${with_multilib_list}" |
| if test "$aarch64_multilibs" = "default"; then |
| # TODO: turn on ILP32 multilib build after its support is mature. |
| # aarch64_multilibs="lp64,ilp32" |
| aarch64_multilibs="lp64" |
| fi |
| aarch64_multilibs=`echo $aarch64_multilibs | sed -e 's/,/ /g'` |
| for aarch64_multilib in ${aarch64_multilibs}; do |
| case ${aarch64_multilib} in |
| ilp32 | lp64 ) |
| TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${aarch64_multilib}" |
| ;; |
| *) |
| echo "--with-multilib-list=${aarch64_multilib} not supported." |
| exit 1 |
| esac |
| done |
| TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'` |
| ;; |
| aarch64*-wrs-vxworks*) |
| tm_file="${tm_file} elfos.h aarch64/aarch64-elf.h" |
| tm_file="${tm_file} vx-common.h vxworks.h aarch64/aarch64-vxworks.h" |
| tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-vxworks" |
| ;; |
| alpha*-*-linux*) |
| tm_file="elfos.h ${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h" |
| tmake_file="${tmake_file} alpha/t-linux alpha/t-alpha" |
| extra_options="${extra_options} alpha/elf.opt" |
| ;; |
| alpha*-*-netbsd*) |
| tm_file="elfos.h ${tm_file} ${nbsd_tm_file} alpha/elf.h alpha/netbsd.h" |
| tmake_file="${tmake_file} alpha/t-alpha" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt \ |
| alpha/elf.opt" |
| ;; |
| alpha*-*-openbsd*) |
| tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT" |
| tm_file="elfos.h alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h" |
| tmake_file="${tmake_file} alpha/t-alpha" |
| extra_options="${extra_options} openbsd.opt alpha/elf.opt" |
| # default x-alpha is only appropriate for dec-osf. |
| ;; |
| alpha*-dec-*vms*) |
| tm_file="${tm_file} vms/vms.h alpha/vms.h" |
| tmake_file="${tmake_file} alpha/t-vms alpha/t-alpha" |
| ;; |
| arc*-*-elf*) |
| tm_file="arc/arc-arch.h dbxelf.h elfos.h newlib-stdint.h arc/elf.h ${tm_file}" |
| tmake_file="arc/t-multilib arc/t-arc" |
| extra_gcc_objs="driver-arc.o" |
| if test "x$with_cpu" != x; then |
| tm_defines="${tm_defines} TARGET_CPU_BUILD=PROCESSOR_$with_cpu" |
| fi |
| if test x${with_endian} = x; then |
| case ${target} in |
| arc*be-*-* | arc*eb-*-*) with_endian=big ;; |
| *) with_endian=little ;; |
| esac |
| fi |
| case ${with_endian} in |
| big|little) ;; |
| *) echo "with_endian=${with_endian} not supported."; exit 1 ;; |
| esac |
| case ${with_endian} in |
| big*) tm_file="arc/big.h ${tm_file}" |
| esac |
| ;; |
| arc*-*-linux*) |
| tm_file="arc/arc-arch.h dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arc/linux.h ${tm_file}" |
| tmake_file="${tmake_file} arc/t-multilib-linux arc/t-arc" |
| extra_gcc_objs="driver-arc.o" |
| if test "x$with_cpu" != x; then |
| tm_defines="${tm_defines} TARGET_CPU_BUILD=PROCESSOR_$with_cpu" |
| fi |
| if test x${with_endian} = x; then |
| case ${target} in |
| arc*be-*-* | arc*eb-*-*) with_endian=big ;; |
| *) with_endian=little ;; |
| esac |
| fi |
| case ${with_endian} in |
| big|little) ;; |
| *) echo "with_endian=${with_endian} not supported."; exit 1 ;; |
| esac |
| case ${with_endian} in |
| big*) tm_file="arc/big.h ${tm_file}" |
| esac |
| # Force .init_array support. The configure script cannot always |
| # automatically detect that GAS supports it, yet we require it. |
| gcc_cv_initfini_array=yes |
| ;; |
| arm-wrs-vxworks7*) |
| # We only support VxWorks 7 now on ARM, post SR600. Pre SR600 |
| # VxWorks 7 was transitory and major versions prior to 7 were based |
| # on long deprecated ABI, not supported at all any more regardless |
| # of VxWorks. |
| extra_options="${extra_options} arm/vxworks.opt" |
| tmake_file="${tmake_file} arm/t-arm arm/t-vxworks arm/t-bpabi" |
| tm_file="elfos.h arm/elf.h arm/bpabi.h arm/aout.h ${tm_file}" |
| tm_file="${tm_file} vx-common.h vxworks.h arm/vxworks.h" |
| target_cpu_cname="generic-armv7-a" |
| need_64bit_hwint=yes |
| ;; |
| arm*-*-freebsd*) # ARM FreeBSD EABI |
| tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h" |
| case $target in |
| arm*b-*-freebsd*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" |
| ;; |
| esac |
| tmake_file="${tmake_file} arm/t-arm arm/t-bpabi" |
| tm_file="${tm_file} arm/bpabi.h arm/freebsd.h arm/aout.h arm/arm.h" |
| case $target in |
| armv6*-*-freebsd*) |
| target_cpu_cname="arm1176jzf-s" |
| if test $fbsd_major -ge 11; then |
| tm_defines="${tm_defines} TARGET_FREEBSD_ARM_HARD_FLOAT=1" |
| fi |
| ;; |
| armv7*-*-freebsd*) |
| target_cpu_cname="generic-armv7-a" |
| tm_defines="${tm_defines} TARGET_FREEBSD_ARM_HARD_FLOAT=1" |
| ;; |
| *) |
| target_cpu_cname="arm9" |
| ;; |
| esac |
| with_tls=${with_tls:-gnu} |
| ;; |
| arm*-*-netbsdelf*) |
| target_cpu_cname="strongarm" |
| tmake_file="${tmake_file} arm/t-arm" |
| tm_file="dbxelf.h elfos.h ${nbsd_tm_file} arm/elf.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| case ${target} in |
| arm*eb-*) tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" ;; |
| esac |
| case ${target} in |
| arm*-*-netbsdelf-*eabi*) |
| tm_file="$tm_file arm/bpabi.h arm/netbsd-elf.h arm/netbsd-eabi.h" |
| tmake_file="$tmake_file arm/t-bpabi arm/t-netbsdeabi" |
| ;; |
| *) |
| tm_file="$tm_file arm/netbsd-elf.h" |
| tmake_file="$tmake_file arm/t-netbsd" |
| ;; |
| esac |
| tm_file="${tm_file} arm/aout.h arm/arm.h" |
| case ${target} in |
| arm*-*-netbsdelf-*eabihf*) |
| # Hard-float requires at least Arm v5te |
| target_cpu_cname="arm10e" |
| tm_defines="${tm_defines} TARGET_DEFAULT_FLOAT_ABI=ARM_FLOAT_ABI_HARD" |
| ;; |
| esac |
| case ${target} in |
| armv6*) target_cpu_cname="arm1176jzf-s";; |
| armv7*) target_cpu_cname="generic-armv7-a";; |
| esac |
| ;; |
| arm*-*-linux-* | arm*-*-uclinuxfdpiceabi) |
| tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h" |
| extra_options="${extra_options} linux-android.opt" |
| case $target in |
| arm*b-*-linux*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" |
| ;; |
| esac |
| tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi" |
| tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h arm/aout.h arm/arm.h" |
| case $target in |
| arm*-*-uclinuxfdpiceabi) |
| tm_file="$tm_file arm/uclinuxfdpiceabi.h" |
| ;; |
| esac |
| # Generation of floating-point instructions requires at least ARMv5te. |
| if [ "$with_float" = "hard" -o "$with_float" = "softfp" ] ; then |
| target_cpu_cname="arm10e" |
| else |
| target_cpu_cname="arm10tdmi" |
| fi |
| # Define multilib configuration for arm-linux-androideabi. |
| case ${target} in |
| *-androideabi) |
| tmake_file="$tmake_file arm/t-linux-androideabi" |
| ;; |
| esac |
| # The EABI requires the use of __cxa_atexit. |
| default_use_cxa_atexit=yes |
| with_tls=${with_tls:-gnu} |
| ;; |
| arm*-*-uclinux*eabi*) # ARM ucLinux |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h" |
| tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf arm/t-bpabi" |
| tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h arm/aout.h arm/arm.h" |
| target_cpu_cname="arm7tdmi" |
| # The EABI requires the use of __cxa_atexit. |
| default_use_cxa_atexit=yes |
| ;; |
| arm*-*-phoenix*) |
| tm_file="elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h" |
| tm_file="${tm_file} newlib-stdint.h phoenix.h" |
| tm_file="${tm_file} arm/aout.h arm/arm.h" |
| tmake_file="${tmake_file} arm/t-arm arm/t-bpabi arm/t-phoenix" |
| target_cpu_cname="arm7tdmi" |
| ;; |
| arm*-*-eabi* | arm*-*-symbianelf* | arm*-*-rtems* | arm*-*-fuchsia*) |
| case ${target} in |
| arm*eb-*-eabi*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" |
| esac |
| default_use_cxa_atexit=yes |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h" |
| tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf" |
| target_cpu_cname="arm7tdmi" |
| case ${target} in |
| arm*-*-eabi*) |
| tm_file="$tm_file newlib-stdint.h" |
| tmake_file="${tmake_file} arm/t-bpabi" |
| use_gcc_stdint=wrap |
| ;; |
| arm*-*-fuchsia*) |
| tm_file="${tm_file} fuchsia.h arm/fuchsia-elf.h glibc-stdint.h" |
| tmake_file="${tmake_file} arm/t-bpabi arm/t-fuchsia" |
| target_cpu_cname="generic-armv7-a" |
| ;; |
| arm*-*-rtems*) |
| tm_file="${tm_file} arm/rtems.h rtems.h newlib-stdint.h" |
| tmake_file="${tmake_file} arm/t-bpabi arm/t-rtems" |
| ;; |
| arm*-*-symbianelf*) |
| tm_file="${tm_file} arm/symbian.h" |
| # We do not include t-bpabi for Symbian OS because the system |
| # provides its own implementation of the BPABI functions. |
| tmake_file="${tmake_file} arm/t-symbian" |
| target_cpu_cname="arm10tdmi" |
| ;; |
| esac |
| tm_file="${tm_file} arm/aout.h arm/arm.h" |
| ;; |
| avr-*-*) |
| tm_file="elfos.h avr/elf.h avr/avr-arch.h avr/avr.h avr/specs.h dbxelf.h avr/avr-stdint.h" |
| if test x${with_avrlibc} != xno; then |
| tm_file="${tm_file} ${cpu_type}/avrlibc.h" |
| tm_defines="${tm_defines} WITH_AVRLIBC" |
| fi |
| # Work out avr_double_comparison which is 2 or 3 and is used in |
| # target hook FLOAT_LIB_COMPARE_RETURNS_BOOL to determine whether |
| # DFmode comparisons return 3-state or 2-state results. |
| case y${with_double_comparison} in |
| y | ytristate) |
| avr_double_comparison=3 |
| ;; |
| ybool | ylibf7) |
| avr_double_comparison=2 |
| ;; |
| *) |
| echo "Error: --with-double-comparison= can only be used with: 'tristate', 'bool', 'libf7'" 1>&2 |
| exit 1 |
| ;; |
| esac |
| case "y${with_libf7}" in |
| yno) |
| # avr_double_comparison as set above. |
| ;; |
| ylibgcc) |
| avr_double_comparison=2 |
| tm_defines="${tm_defines} WITH_LIBF7_LIBGCC" |
| ;; |
| y | yyes | ymath-symbols) |
| avr_double_comparison=2 |
| tm_defines="${tm_defines} WITH_LIBF7_LIBGCC" |
| tm_defines="${tm_defines} WITH_LIBF7_MATH" |
| tm_defines="${tm_defines} WITH_LIBF7_MATH_SYMBOLS" |
| ;; |
| ymath) |
| avr_double_comparison=2 |
| tm_defines="${tm_defines} WITH_LIBF7_LIBGCC" |
| tm_defines="${tm_defines} WITH_LIBF7_MATH" |
| ;; |
| *) |
| echo "Error: --with-libf7=${with_libf7} but can only be used with: 'libgcc', 'math', 'math-symbols', 'yes', 'no'" 1>&2 |
| exit 1 |
| ;; |
| esac |
| tm_defines="${tm_defines} WITH_DOUBLE_COMPARISON=${avr_double_comparison}" |
| case y${with_double} in |
| y32) |
| avr_double=32 |
| tm_defines="${tm_defines} HAVE_DOUBLE32" |
| ;; |
| y64) |
| avr_double=64 |
| tm_defines="${tm_defines} HAVE_DOUBLE64" |
| ;; |
| y64,32) |
| avr_double=64 |
| avr_double_multilib=1 |
| tm_defines="${tm_defines} HAVE_DOUBLE32" |
| tm_defines="${tm_defines} HAVE_DOUBLE64" |
| tm_defines="${tm_defines} HAVE_DOUBLE_MULTILIB" |
| ;; |
| y | y32,64) |
| avr_double=32 |
| avr_double_multilib=1 |
| tm_defines="${tm_defines} HAVE_DOUBLE32" |
| tm_defines="${tm_defines} HAVE_DOUBLE64" |
| tm_defines="${tm_defines} HAVE_DOUBLE_MULTILIB" |
| ;; |
| *) |
| echo "Error: --with-double= can only be used with: '32', '32,64', '64,32', '64'" 1>&2 |
| exit 1 |
| ;; |
| esac |
| case y${with_long_double} in |
| y32) |
| avr_long_double=32 |
| tm_defines="${tm_defines} HAVE_LONG_DOUBLE32" |
| ;; |
| y64) |
| avr_long_double=64 |
| tm_defines="${tm_defines} HAVE_LONG_DOUBLE64" |
| ;; |
| y | y64,32) |
| avr_long_double=64 |
| avr_long_double_multilib=1 |
| tm_defines="${tm_defines} HAVE_LONG_DOUBLE32" |
| tm_defines="${tm_defines} HAVE_LONG_DOUBLE64" |
| tm_defines="${tm_defines} HAVE_LONG_DOUBLE_MULTILIB" |
| ;; |
| y32,64) |
| avr_long_double=32 |
| avr_long_double_multilib=1 |
| tm_defines="${tm_defines} HAVE_LONG_DOUBLE32" |
| tm_defines="${tm_defines} HAVE_LONG_DOUBLE64" |
| tm_defines="${tm_defines} HAVE_LONG_DOUBLE_MULTILIB" |
| ;; |
| ydouble) |
| avr_long_double=${avr_double} |
| tm_defines="${tm_defines} HAVE_LONG_DOUBLE_IS_DOUBLE" |
| if test y${avr_double_multilib} = y1; then |
| tm_defines="${tm_defines} HAVE_LONG_DOUBLE32" |
| tm_defines="${tm_defines} HAVE_LONG_DOUBLE64" |
| else |
| tm_defines="${tm_defines} HAVE_LONG_DOUBLE${avr_long_double}" |
| fi |
| ;; |
| *) |
| echo "Error: --with-long_double= can only be used with: '32', '32,64', '64,32', '64', 'double'" 1>&2 |
| exit 1 |
| ;; |
| esac |
| if test ${avr_long_double}x${avr_long_double_multilib}y${avr_double_multilib}z = 32xy1z; then |
| if test y${with_long_double} != ydouble; then |
| echo "Error: --with-double=${with_double} requests a multilib for double, but long double is always 32 bits wide due to --with-long-double=${with_long_double}" 1>&2 |
| exit 1 |
| fi |
| fi |
| if test ${avr_double}x${avr_long_double_multilib}y${avr_double_multilib}z = 64x1yz; then |
| echo "Error: --with-long-double=${with_long_double} requests a multilib for long double, but double is always 64 bits wide due to --with-double=64" 1>&2 |
| exit 1 |
| fi |
| if test y${avr_double}${avr_long_double} = y6432; then |
| echo "Error: double default of 64 bits from --with-double=${with_double} conflicts with default of 32 bits for long double from --with-long-double=${with_long_double}" 1>&2 |
| exit 1 |
| fi |
| tm_defines="${tm_defines} WITH_DOUBLE${avr_double}" |
| tm_defines="${tm_defines} WITH_LONG_DOUBLE${avr_long_double}" |
| tmake_file="${tmake_file} avr/t-avr avr/t-multilib" |
| use_gcc_stdint=wrap |
| extra_gcc_objs="driver-avr.o avr-devices.o" |
| extra_objs="avr-devices.o avr-log.o" |
| ;; |
| bfin*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h" |
| tmake_file=bfin/t-bfin-elf |
| use_collect2=no |
| ;; |
| bfin*-uclinux*) |
| tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h" |
| tmake_file=bfin/t-bfin-uclinux |
| use_collect2=no |
| ;; |
| bfin*-linux-uclibc*) |
| tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h" |
| tmake_file="${tmake_file} bfin/t-bfin-linux" |
| use_collect2=no |
| ;; |
| bfin*-rtems*) |
| tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h" |
| tmake_file="${tmake_file} bfin/t-rtems" |
| ;; |
| bfin*-*) |
| tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h" |
| use_collect2=no |
| use_gcc_stdint=wrap |
| ;; |
| bpf-*-*) |
| tm_file="elfos.h ${tm_file}" |
| tmake_file="${tmake_file} bpf/t-bpf" |
| use_collect2=no |
| extra_headers="bpf-helpers.h" |
| use_gcc_stdint=provide |
| extra_objs="coreout.o" |
| target_gtfiles="$target_gtfiles \$(srcdir)/config/bpf/coreout.cc" |
| ;; |
| cr16-*-elf) |
| tm_file="elfos.h ${tm_file} newlib-stdint.h" |
| tmake_file="${tmake_file} cr16/t-cr16 " |
| use_collect2=no |
| ;; |
| cris-*-elf | cris-*-none) |
| tm_file="elfos.h newlib-stdint.h ${tm_file}" |
| tmake_file="cris/t-cris cris/t-elfmulti" |
| gas=yes |
| extra_options="${extra_options} cris/elf.opt" |
| use_gcc_stdint=wrap |
| ;; |
| csky-*-*) |
| if test x${with_endian} != x; then |
| case ${with_endian} in |
| big|little) ;; |
| *) |
| echo "with_endian=${with_endian} not supported." |
| exit 1 |
| ;; |
| esac |
| fi |
| if test x${with_float} != x; then |
| case ${with_float} in |
| soft | hard) ;; |
| *) echo |
| "Unknown floating point type used in --with-float=$with_float" |
| exit 1 |
| ;; |
| esac |
| fi |
| tm_file="csky/csky.h" |
| md_file="csky/csky.md" |
| out_file="csky/csky.cc" |
| tm_p_file="${tm_p_file} csky/csky-protos.h" |
| extra_options="${extra_options} csky/csky_tables.opt" |
| |
| if test x${enable_tpf_debug} = xyes; then |
| tm_defines="${tm_defines} ENABLE_TPF_DEBUG" |
| fi |
| |
| case ${target} in |
| csky-*-elf*) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} csky/csky-elf.h" |
| tmake_file="csky/t-csky csky/t-csky-elf" |
| default_use_cxa_atexit=no |
| use_gcc_stdint=wrap |
| ;; |
| csky-*-linux*) |
| tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} csky/csky-linux-elf.h" |
| tmake_file="${tmake_file} csky/t-csky csky/t-csky-linux" |
| |
| case ${target} in |
| csky-*-linux-gnu*) |
| tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC" |
| # Force .init_array support. The configure script cannot always |
| # automatically detect that GAS supports it, yet we require it. |
| gcc_cv_initfini_array=yes |
| ;; |
| csky-*-linux-uclibc*) |
| tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC" |
| default_use_cxa_atexit=no |
| ;; |
| *) |
| echo "Unknown target $target" |
| exit 1 |
| ;; |
| esac |
| ;; |
| *) |
| echo "Unknown target $target" |
| exit 1 |
| ;; |
| esac |
| ;; |
| epiphany-*-elf | epiphany-*-rtems*) |
| tm_file="dbxelf.h elfos.h ${tm_file}" |
| tmake_file="${tmake_file} epiphany/t-epiphany" |
| case ${target} in |
| epiphany-*-rtems*) |
| tm_file="${tm_file} epiphany/rtems.h rtems.h newlib-stdint.h" |
| ;; |
| *) |
| tm_file="${tm_file} newlib-stdint.h" |
| ;; |
| esac |
| extra_options="${extra_options} fused-madd.opt" |
| extra_objs="${extra_objs} mode-switch-use.o resolve-sw-modes.o" |
| tm_defines="${tm_defines} EPIPHANY_STACK_OFFSET=${with_stack_offset:-8}" |
| extra_headers="epiphany_intrinsics.h" |
| ;; |
| fr30-*-elf) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" |
| ;; |
| frv-*-elf) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" |
| tmake_file=frv/t-frv |
| ;; |
| frv-*-*linux*) |
| tm_file="dbxelf.h elfos.h ${tm_file} \ |
| gnu-user.h linux.h glibc-stdint.h frv/linux.h" |
| tmake_file="${tmake_file} frv/t-frv frv/t-linux" |
| ;; |
| ft32-*-elf) |
| gas=yes |
| gnu_ld=yes |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" |
| tmake_file="${tmake_file} ft32/t-ft32" |
| ;; |
| amdgcn-*-amdhsa) |
| tm_file="elfos.h gcn/gcn-hsa.h gcn/gcn.h newlib-stdint.h" |
| tmake_file="gcn/t-gcn-hsa" |
| native_system_header_dir=/include |
| extra_modes=gcn/gcn-modes.def |
| extra_objs="${extra_objs} gcn-tree.o" |
| extra_gcc_objs="driver-gcn.o" |
| case "$host" in |
| x86_64*-*-linux-gnu ) |
| if test "$ac_cv_search_dlopen" != no; then |
| extra_programs="${extra_programs} gcn-run\$(exeext)" |
| fi |
| ;; |
| esac |
| if test x$enable_as_accelerator = xyes; then |
| extra_programs="${extra_programs} mkoffload\$(exeext)" |
| tm_file="${tm_file} gcn/offload.h" |
| fi |
| # Force .init_array support. |
| gcc_cv_initfini_array=yes |
| thread_file=gcn |
| ;; |
| moxie-*-elf) |
| gas=yes |
| gnu_ld=yes |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" |
| tmake_file="${tmake_file} moxie/t-moxie" |
| ;; |
| moxie-*-uclinux*) |
| gas=yes |
| gnu_ld=yes |
| tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h" |
| tmake_file="${tmake_file} moxie/t-moxie" |
| ;; |
| moxie-*-rtems*) |
| tmake_file="${tmake_file} moxie/t-moxie" |
| tm_file="moxie/moxie.h dbxelf.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h" |
| ;; |
| moxie-*-moxiebox*) |
| gas=yes |
| gnu_ld=yes |
| tm_file="${tm_file} dbxelf.h elfos.h moxie/moxiebox.h newlib-stdint.h" |
| tmake_file="${tmake_file} moxie/t-moxiebox" |
| ;; |
| h8300-*-elf*) |
| tmake_file="h8300/t-h8300" |
| tm_file="h8300/h8300.h elfos.h newlib-stdint.h h8300/elf.h" |
| ;; |
| h8300-*-linux*) |
| tmake_file="${tmake_file} h8300/t-h8300 h8300/t-linux" |
| tm_file="h8300/h8300.h elfos.h gnu-user.h linux.h glibc-stdint.h h8300/linux.h" |
| ;; |
| hppa*64*-*-linux*) |
| target_cpu_default="MASK_PA_11|MASK_PA_20" |
| tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h gnu-user.h linux.h \ |
| glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \ |
| pa/pa64-linux.h" |
| tmake_file="${tmake_file} pa/t-pa pa/t-linux" |
| d_target_objs="${d_target_objs} pa-d.o" |
| gas=yes gnu_ld=yes |
| ;; |
| hppa*-*-linux*) |
| target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS|MASK_CALLER_COPIES" |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \ |
| pa/pa32-regs.h pa/pa32-linux.h" |
| tmake_file="${tmake_file} pa/t-pa pa/t-linux" |
| d_target_objs="${d_target_objs} pa-d.o" |
| ;; |
| hppa*-*-openbsd*) |
| target_cpu_default="MASK_PA_11" |
| tm_file="${tm_file} dbxelf.h elfos.h openbsd.h openbsd-stdint.h openbsd-libpthread.h \ |
| pa/pa-openbsd.h pa/pa32-regs.h pa/pa32-openbsd.h" |
| extra_options="${extra_options} openbsd.opt" |
| tmake_file="pa/t-pa" |
| d_target_objs="${d_target_objs} pa-d.o" |
| gas=yes |
| gnu_ld=yes |
| ;; |
| hppa*-*-netbsd*) |
| target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS" |
| tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file} \ |
| pa/pa-netbsd.h pa/pa32-regs.h pa/pa32-netbsd.h" |
| tmake_file="${tmake_file}" |
| tm_defines="${tm_defines} CHAR_FAST8=1 SHORT_FAST16=1" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| ;; |
| hppa[12]*-*-hpux10*) |
| case ${target} in |
| hppa1.1-*-* | hppa2*-*-*) |
| target_cpu_default="MASK_PA_11" |
| ;; |
| esac |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \ |
| pa/pa-hpux.h pa/pa-hpux10.h" |
| extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux10.opt" |
| case ${target} in |
| *-*-hpux10.[1-9]*) |
| tm_file="${tm_file} pa/pa-hpux1010.h" |
| extra_options="${extra_options} pa/pa-hpux1010.opt" |
| ;; |
| esac |
| use_gcc_stdint=provide |
| tm_file="${tm_file} hpux-stdint.h" |
| tmake_file="pa/t-pa t-slibgcc" |
| d_target_objs="${d_target_objs} pa-d.o" |
| case ${enable_threads} in |
| "") |
| if test x$have_pthread_h = xyes ; then |
| tmake_file="${tmake_file} pa/t-dce-thr" |
| fi |
| ;; |
| yes | dce) |
| tmake_file="${tmake_file} pa/t-dce-thr" |
| ;; |
| esac |
| use_collect2=yes |
| gas=yes |
| if test "x$with_dwarf2" != x; then |
| echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2 |
| dwarf2=no |
| fi |
| ;; |
| hppa*64*-*-hpux11*) |
| target_cpu_default="MASK_PA_11|MASK_PA_20" |
| if test x$gnu_ld = xyes |
| then |
| target_cpu_default="${target_cpu_default}|MASK_GNU_LD" |
| fi |
| tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \ |
| pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \ |
| pa/pa-hpux11.h" |
| case ${target} in |
| *-*-hpux11.[12]*) |
| tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h" |
| extra_options="${extra_options} pa/pa-hpux1111.opt" |
| ;; |
| *-*-hpux11.[3-9]*) |
| tm_file="${tm_file} pa/pa-hpux1131.h pa/pa-64.h pa/pa64-hpux.h" |
| extra_options="${extra_options} pa/pa-hpux1131.opt" |
| ;; |
| *) |
| tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h" |
| ;; |
| esac |
| extra_options="${extra_options} pa/pa-hpux.opt \ |
| pa/pa-hpux1010.opt pa/pa64-hpux.opt hpux11.opt" |
| tmake_file="pa/t-pa t-slibgcc" |
| d_target_objs="${d_target_objs} pa-d.o" |
| case x${enable_threads} in |
| x | xyes | xposix ) |
| thread_file=posix |
| ;; |
| esac |
| gas=yes |
| case ${target} in |
| *-*-hpux11.[01]*) |
| use_gcc_stdint=provide |
| tm_file="${tm_file} hpux-stdint.h" |
| ;; |
| *-*-hpux11.[23]*) |
| use_gcc_stdint=wrap |
| tm_file="${tm_file} hpux-stdint.h" |
| ;; |
| esac |
| ;; |
| hppa[12]*-*-hpux11*) |
| case ${target} in |
| hppa1.1-*-* | hppa2*-*-*) |
| target_cpu_default="MASK_PA_11" |
| ;; |
| esac |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \ |
| pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h" |
| extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt \ |
| hpux11.opt" |
| case ${target} in |
| *-*-hpux11.[12]*) |
| tm_file="${tm_file} pa/pa-hpux1111.h" |
| extra_options="${extra_options} pa/pa-hpux1111.opt" |
| ;; |
| *-*-hpux11.[3-9]*) |
| tm_file="${tm_file} pa/pa-hpux1131.h" |
| extra_options="${extra_options} pa/pa-hpux1131.opt" |
| ;; |
| esac |
| tmake_file="pa/t-pa t-slibgcc" |
| d_target_objs="${d_target_objs} pa-d.o" |
| case x${enable_threads} in |
| x | xyes | xposix ) |
| thread_file=posix |
| ;; |
| esac |
| use_collect2=yes |
| gas=yes |
| case ${target} in |
| *-*-hpux11.[01]*) |
| use_gcc_stdint=provide |
| tm_file="${tm_file} hpux-stdint.h" |
| ;; |
| *-*-hpux11.[23]*) |
| use_gcc_stdint=wrap |
| tm_file="${tm_file} hpux-stdint.h" |
| ;; |
| esac |
| if test "x$with_dwarf2" != x; then |
| echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2 |
| dwarf2=no |
| fi |
| ;; |
| i[34567]86-*-darwin1[89]* | i[34567]86-*-darwin2*) |
| echo "Error: 32bit target is not supported after Darwin17" 1>&2 |
| ;; |
| i[34567]86-*-darwin*) |
| need_64bit_isa=yes |
| # Baseline choice for a machine that allows m64 support. |
| with_cpu=${with_cpu:-core2} |
| tmake_file="${tmake_file} ${cpu_type}/t-darwin32-biarch t-slibgcc" |
| tm_file="${cpu_type}/darwin32-biarch.h ${tm_file} " |
| ;; |
| x86_64-*-darwin1[89]* | x86_64-*-darwin2*) |
| # Only 64b from now |
| tm_defines="${tm_defines} TARGET_64BIT_DEFAULT=(OPTION_MASK_ISA_64BIT|OPTION_MASK_ABI_64)" |
| tm_defines="${tm_defines} TARGET_BI_ARCH=0" |
| with_cpu=${with_cpu:-core2} |
| tmake_file="${tmake_file} t-slibgcc" |
| ;; |
| x86_64-*-darwin*) |
| with_cpu=${with_cpu:-core2} |
| tmake_file="${tmake_file} ${cpu_type}/t-darwin64-biarch t-slibgcc" |
| tm_file="${cpu_type}/darwin64-biarch.h ${tm_file} " |
| ;; |
| i[34567]86-*-elfiamcu) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/iamcu.h" |
| ;; |
| i[34567]86-*-elf*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h" |
| ;; |
| x86_64-*-elf*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h" |
| ;; |
| x86_64-*-rtems*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rtemself.h rtems.h" |
| ;; |
| i[34567]86-*-rdos*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/rdos.h" |
| ;; |
| x86_64-*-rdos*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rdos.h i386/rdos64.h" |
| tmake_file="i386/t-i386elf t-svr4" |
| ;; |
| i[34567]86-*-dragonfly*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h dragonfly.h dragonfly-stdint.h i386/dragonfly.h" |
| tmake_file="${tmake_file} i386/t-crtstuff" |
| ;; |
| x86_64-*-dragonfly*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h dragonfly.h dragonfly-stdint.h i386/x86-64.h i386/dragonfly.h" |
| tmake_file="${tmake_file} i386/t-crtstuff" |
| ;; |
| i[34567]86-*-freebsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h" |
| ;; |
| x86_64-*-freebsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h" |
| ;; |
| i[34567]86-*-netbsdelf*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${nbsd_tm_file} i386/netbsd-elf.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| ;; |
| x86_64-*-netbsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${nbsd_tm_file} i386/x86-64.h i386/netbsd64.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| ;; |
| i[34567]86-*-openbsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h" |
| tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h" |
| extra_options="${extra_options} openbsd.opt" |
| gas=yes |
| gnu_ld=yes |
| ;; |
| x86_64-*-openbsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h" |
| tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/x86-64.h i386/openbsdelf.h" |
| extra_options="${extra_options} openbsd.opt" |
| gas=yes |
| gnu_ld=yes |
| ;; |
| i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu) |
| # Intel 80386's running GNU/* |
| # with ELF format using glibc 2 |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h" |
| case ${target} in |
| i[34567]86-*-linux*) |
| tm_file="${tm_file} linux.h linux-android.h" |
| extra_options="${extra_options} linux-android.opt" |
| if test x$enable_targets = xall; then |
| tm_file="${tm_file} i386/x86-64.h i386/gnu-user-common.h i386/gnu-user64.h i386/linux-common.h i386/linux64.h" |
| tm_defines="${tm_defines} TARGET_BI_ARCH=1" |
| tmake_file="${tmake_file} i386/t-linux64" |
| x86_multilibs="${with_multilib_list}" |
| if test "$x86_multilibs" = "default"; then |
| x86_multilibs="m64,m32" |
| fi |
| x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'` |
| for x86_multilib in ${x86_multilibs}; do |
| case ${x86_multilib} in |
| m32 | m64 | mx32) |
| TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}" |
| ;; |
| *) |
| echo "--with-multilib-list=${x86_with_multilib} not supported." |
| exit 1 |
| esac |
| done |
| TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'` |
| need_64bit_isa=yes |
| if test x$with_cpu = x; then |
| if test x$with_cpu_64 = x; then |
| with_cpu_64=generic |
| fi |
| else |
| case " $x86_cpus $x86_archs $x86_64_archs " in |
| *" $with_cpu "*) |
| ;; |
| *) |
| echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2 |
| echo "$x86_cpus $x86_archs $x86_64_archs " 1>&2 |
| exit 1 |
| ;; |
| esac |
| fi |
| else |
| tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h i386/linux-common.h i386/linux.h" |
| fi |
| ;; |
| i[34567]86-*-kfreebsd*-gnu) |
| tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" |
| ;; |
| i[34567]86-*-kopensolaris*-gnu) |
| tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h kopensolaris-gnu.h i386/kopensolaris-gnu.h" |
| ;; |
| i[34567]86-*-gnu*) |
| tm_file="$tm_file i386/gnu-user-common.h i386/gnu-user.h gnu.h i386/gnu.h" |
| ;; |
| esac |
| ;; |
| x86_64-*-linux* | x86_64-*-kfreebsd*-gnu) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h \ |
| i386/x86-64.h i386/gnu-user-common.h i386/gnu-user64.h" |
| case ${target} in |
| x86_64-*-linux*) |
| tm_file="${tm_file} linux.h linux-android.h i386/linux-common.h i386/linux64.h" |
| extra_options="${extra_options} linux-android.opt" |
| ;; |
| x86_64-*-kfreebsd*-gnu) |
| tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu64.h" |
| ;; |
| esac |
| tmake_file="${tmake_file} i386/t-linux64" |
| x86_multilibs="${with_multilib_list}" |
| if test "$x86_multilibs" = "default"; then |
| case ${with_abi} in |
| x32 | mx32) |
| x86_multilibs="mx32" |
| ;; |
| *) |
| x86_multilibs="m64,m32" |
| ;; |
| esac |
| fi |
| x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'` |
| for x86_multilib in ${x86_multilibs}; do |
| case ${x86_multilib} in |
| m32 | m64 | mx32) |
| TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}" |
| ;; |
| *) |
| echo "--with-multilib-list=${x86_with_multilib} not supported." |
| exit 1 |
| esac |
| done |
| TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'` |
| ;; |
| i[34567]86-pc-msdosdjgpp*) |
| xm_file=i386/xm-djgpp.h |
| tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h i386/djgpp-stdint.h" |
| native_system_header_dir=/dev/env/DJDIR/include |
| extra_options="${extra_options} i386/djgpp.opt" |
| gnu_ld=yes |
| gas=yes |
| use_gcc_stdint=wrap |
| ;; |
| i[34567]86-*-lynxos*) |
| xm_defines=POSIX |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h" |
| tmake_file="${tmake_file} t-lynx" |
| extra_options="${extra_options} lynx.opt" |
| thread_file=lynx |
| gnu_ld=yes |
| gas=yes |
| ;; |
| i[34567]86-*-nto-qnx*) |
| tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h" |
| extra_options="${extra_options} i386/nto.opt" |
| gnu_ld=yes |
| gas=yes |
| ;; |
| i[34567]86-*-rtems*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h" |
| tmake_file="${tmake_file} i386/t-rtems" |
| ;; |
| i[34567]86-*-solaris2* | x86_64-*-solaris2*) |
| # Set default arch_32 to pentium4, tune_32 to generic like the other |
| # i386 targets, although config.guess defaults to i386-pc-solaris2*. |
| with_arch_32=${with_arch_32:-pentium4} |
| with_tune_32=${with_tune_32:-generic} |
| tm_file="${tm_file} i386/unix.h i386/att.h ${sol2_tm_file_head} i386/x86-64.h ${sol2_tm_file_tail}" |
| tm_defines="${tm_defines} TARGET_BI_ARCH=1" |
| tmake_file="$tmake_file i386/t-sol2" |
| need_64bit_isa=yes |
| if test x$with_cpu = x; then |
| if test x$with_cpu_64 = x; then |
| with_cpu_64=generic |
| fi |
| else |
| case " $x86_cpus $x86_archs $x86_64_archs " in |
| *" $with_cpu "*) |
| ;; |
| *) |
| echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2 |
| echo "$x86_cpus $x86_archs $x86_64_archs" 1>&2 |
| exit 1 |
| ;; |
| esac |
| fi |
| ;; |
| i[4567]86-wrs-vxworks*|x86_64-wrs-vxworks7*) |
| tm_file="${tm_file} i386/unix.h i386/att.h elfos.h" |
| case ${target} in |
| x86_64-*) |
| need_64bit_isa=yes |
| tm_file="${tm_file} i386/x86-64.h" |
| ;; |
| esac |
| tm_file="${tm_file} vx-common.h" |
| case ${target} in |
| *-vxworksae*) |
| tm_file="${tm_file} vxworksae.h i386/vxworks.h i386/vxworksae.h" |
| tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae" |
| ;; |
| *) |
| tm_file="${tm_file} vxworks.h i386/vxworks.h" |
| tmake_file="${tmake_file} i386/t-vxworks" |
| ;; |
| esac |
| ;; |
| i[34567]86-*-cygwin*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h" |
| xm_file=i386/xm-cygwin.h |
| tmake_file="${tmake_file} i386/t-cygming t-slibgcc" |
| target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.cc" |
| extra_options="${extra_options} i386/cygming.opt i386/cygwin.opt" |
| extra_objs="${extra_objs} winnt.o winnt-stubs.o" |
| c_target_objs="${c_target_objs} msformat-c.o" |
| cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o" |
| d_target_objs="${d_target_objs} winnt-d.o" |
| target_has_targetdm="yes" |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| default_use_cxa_atexit=yes |
| use_gcc_stdint=wrap |
| ;; |
| x86_64-*-cygwin*) |
| need_64bit_isa=yes |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-w64.h i386/cygwin-stdint.h" |
| xm_file=i386/xm-cygwin.h |
| tmake_file="${tmake_file} i386/t-cygming t-slibgcc i386/t-cygwin-w64" |
| target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.cc" |
| extra_options="${extra_options} i386/cygming.opt i386/cygwin.opt" |
| extra_objs="${extra_objs} winnt.o winnt-stubs.o" |
| c_target_objs="${c_target_objs} msformat-c.o" |
| cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o" |
| d_target_objs="${d_target_objs} winnt-d.o" |
| target_has_targetdm="yes" |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| default_use_cxa_atexit=yes |
| use_gcc_stdint=wrap |
| tm_defines="${tm_defines} TARGET_CYGWIN64=1" |
| ;; |
| i[34567]86-*-mingw* | x86_64-*-mingw*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h" |
| xm_file=i386/xm-mingw32.h |
| c_target_objs="${c_target_objs} winnt-c.o" |
| cxx_target_objs="${cxx_target_objs} winnt-c.o" |
| d_target_objs="${d_target_objs} winnt-d.o" |
| target_has_targetcm="yes" |
| target_has_targetdm="yes" |
| case ${target} in |
| x86_64-*-* | *-w64-*) |
| need_64bit_isa=yes |
| ;; |
| *) |
| ;; |
| esac |
| if test x$enable_threads = xposix ; then |
| tm_file="${tm_file} i386/mingw-pthread.h" |
| fi |
| tm_file="${tm_file} i386/mingw32.h" |
| # This makes the logic if mingw's or the w64 feature set has to be used |
| case ${target} in |
| *-w64-*) |
| user_headers_inc_next_post="${user_headers_inc_next_post} float.h" |
| user_headers_inc_next_pre="${user_headers_inc_next_pre} stddef.h stdarg.h" |
| tm_file="${tm_file} i386/mingw-w64.h" |
| if test x$enable_targets = xall; then |
| tm_defines="${tm_defines} TARGET_BI_ARCH=1" |
| if test x$with_cpu = x; then |
| if test x$with_cpu_64 = x; then |
| with_cpu_64=generic |
| fi |
| else |
| case " $x86_cpus $x86_archs $x86_64_archs " in |
| *" $with_cpu "*) |
| ;; |
| *) |
| echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2 |
| echo "$x86_cpus $x86_archs $x86_64_archs" 1>&2 |
| exit 1 |
| ;; |
| esac |
| fi |
| fi |
| ;; |
| *) |
| ;; |
| esac |
| tm_file="${tm_file} i386/mingw-stdint.h" |
| tmake_file="${tmake_file} t-winnt i386/t-cygming t-slibgcc" |
| case ${target} in |
| x86_64-w64-*) |
| tmake_file="${tmake_file} i386/t-mingw-w64" |
| ;; |
| i[34567]86-w64-*) |
| tmake_file="${tmake_file} i386/t-mingw-w32" |
| ;; |
| esac |
| native_system_header_dir=/mingw/include |
| target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.cc" |
| extra_options="${extra_options} i386/cygming.opt i386/mingw.opt" |
| case ${target} in |
| *-w64-*) |
| extra_options="${extra_options} i386/mingw-w64.opt" |
| ;; |
| *) |
| ;; |
| esac |
| extra_objs="${extra_objs} winnt.o winnt-stubs.o" |
| c_target_objs="${c_target_objs} msformat-c.o" |
| cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o" |
| gas=yes |
| gnu_ld=yes |
| default_use_cxa_atexit=yes |
| use_gcc_stdint=wrap |
| case ${enable_threads} in |
| "" | yes | win32) |
| thread_file='win32' |
| ;; |
| posix) |
| thread_file='posix' |
| ;; |
| esac |
| case ${target} in |
| *mingw32crt*) |
| tm_file="${tm_file} i386/crtdll.h" |
| ;; |
| *mingw32msv* | *mingw*) |
| ;; |
| esac |
| ;; |
| x86_64-*-fuchsia*) |
| tmake_file="${tmake_file} i386/t-x86_64-elf" |
| tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h fuchsia.h" |
| ;; |
| ia64*-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h" |
| tmake_file="ia64/t-ia64" |
| target_cpu_default="0" |
| if test x$gas = xyes |
| then |
| target_cpu_default="${target_cpu_default}|MASK_GNU_AS" |
| fi |
| if test x$gnu_ld = xyes |
| then |
| target_cpu_default="${target_cpu_default}|MASK_GNU_LD" |
| fi |
| ;; |
| ia64*-*-freebsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h" |
| target_cpu_default="MASK_GNU_AS|MASK_GNU_LD" |
| tmake_file="${tmake_file} ia64/t-ia64" |
| ;; |
| ia64*-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h" |
| tmake_file="${tmake_file} ia64/t-ia64 ia64/t-linux t-libunwind" |
| target_cpu_default="MASK_GNU_AS|MASK_GNU_LD" |
| ;; |
| ia64*-*-hpux*) |
| tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/hpux.h" |
| tmake_file="ia64/t-ia64 ia64/t-hpux t-slibgcc" |
| target_cpu_default="MASK_GNU_AS" |
| case x$enable_threads in |
| x | xyes | xposix ) |
| thread_file=posix |
| ;; |
| esac |
| use_collect2=no |
| c_target_objs="ia64-c.o" |
| cxx_target_objs="ia64-c.o" |
| extra_options="${extra_options} ia64/ilp32.opt hpux11.opt" |
| use_gcc_stdint=wrap |
| tm_file="${tm_file} hpux-stdint.h" |
| case ${target} in |
| *-*-hpux11.3*) |
| tm_file="${tm_file} ia64/hpux-unix2003.h" |
| ;; |
| esac |
| ;; |
| ia64-hp-*vms*) |
| tm_file="${tm_file} elfos.h ia64/sysv4.h vms/vms.h ia64/vms.h" |
| tmake_file="${tmake_file} ia64/t-ia64" |
| target_cpu_default="0" |
| if test x$gas = xyes |
| then |
| target_cpu_default="${target_cpu_default}|MASK_GNU_AS" |
| fi |
| extra_options="${extra_options} ia64/vms.opt" |
| ;; |
| iq2000*-*-elf*) |
| tm_file="elfos.h newlib-stdint.h iq2000/iq2000.h" |
| out_file=iq2000/iq2000.cc |
| md_file=iq2000/iq2000.md |
| ;; |
| lm32-*-elf*) |
| tm_file="dbxelf.h elfos.h ${tm_file} newlib-stdint.h" |
| tmake_file="${tmake_file} lm32/t-lm32" |
| ;; |
| lm32-*-rtems*) |
| tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h" |
| tmake_file="${tmake_file} lm32/t-lm32" |
| tmake_file="${tmake_file} lm32/t-rtems" |
| ;; |
| lm32-*-uclinux*) |
| tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h" |
| tmake_file="${tmake_file} lm32/t-lm32" |
| ;; |
| m32r-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file}" |
| ;; |
| m32rle-*-elf*) |
| tm_file="elfos.h newlib-stdint.h m32r/little.h ${tm_file}" |
| ;; |
| m68k-*-elf* | fido-*-elf*) |
| case ${target} in |
| fido-*-elf*) |
| # Check that $with_cpu makes sense. |
| case $with_cpu in |
| "" | "fidoa") |
| ;; |
| *) |
| echo "Cannot accept --with-cpu=$with_cpu" |
| exit 1 |
| ;; |
| esac |
| with_cpu=fidoa |
| ;; |
| *) |
| default_m68k_cpu=68020 |
| default_cf_cpu=5206 |
| ;; |
| esac |
| tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h" |
| tm_defines="${tm_defines} MOTOROLA=1" |
| tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf" |
| # Add multilibs for targets other than fido. |
| case ${target} in |
| fido-*-elf*) |
| ;; |
| *) |
| tmake_file="$tmake_file m68k/t-mlibs" |
| ;; |
| esac |
| ;; |
| m68k*-*-netbsdelf*) |
| default_m68k_cpu=68020 |
| default_cf_cpu=5475 |
| tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file} m68k/netbsd-elf.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| tm_defines="${tm_defines} MOTOROLA=1 CHAR_FAST8=1 SHORT_FAST16=1" |
| ;; |
| m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux |
| # with uClibc, using the new GNU/Linux-style |
| # ABI. |
| default_m68k_cpu=68020 |
| default_cf_cpu=5206 |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h" |
| extra_options="${extra_options} m68k/uclinux.opt" |
| tm_defines="${tm_defines} MOTOROLA=1" |
| tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs" |
| ;; |
| m68k-*-linux*) # Motorola m68k's running GNU/Linux |
| # with ELF format using glibc 2 |
| # aka the GNU/Linux C library 6. |
| default_m68k_cpu=68020 |
| default_cf_cpu=5475 |
| with_arch=${with_arch:-m68k} |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h" |
| extra_options="${extra_options} m68k/ieee.opt" |
| tm_defines="${tm_defines} MOTOROLA=1" |
| tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs" |
| ;; |
| m68k-*-rtems*) |
| default_m68k_cpu=68020 |
| default_cf_cpu=5206 |
| tmake_file="${tmake_file} m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff m68k/t-rtems m68k/t-mlibs" |
| tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h" |
| tm_defines="${tm_defines} MOTOROLA=1" |
| ;; |
| mcore-*-elf) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h" |
| tmake_file=mcore/t-mcore |
| inhibit_libc=true |
| ;; |
| microblaze*-linux*) |
| case $target in |
| microblazeel-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0" |
| ;; |
| microblaze-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321" |
| ;; |
| esac |
| tm_file="${tm_file} dbxelf.h gnu-user.h linux.h microblaze/linux.h" |
| tm_file="${tm_file} glibc-stdint.h" |
| c_target_objs="${c_target_objs} microblaze-c.o" |
| cxx_target_objs="${cxx_target_objs} microblaze-c.o" |
| tmake_file="${tmake_file} microblaze/t-microblaze" |
| tmake_file="${tmake_file} microblaze/t-microblaze-linux" |
| ;; |
| microblaze*-*-rtems*) |
| case $target in |
| microblazeel-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0" |
| ;; |
| microblaze-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321" |
| ;; |
| esac |
| tm_file="${tm_file} dbxelf.h" |
| tm_file="${tm_file} microblaze/rtems.h rtems.h newlib-stdint.h" |
| c_target_objs="${c_target_objs} microblaze-c.o" |
| cxx_target_objs="${cxx_target_objs} microblaze-c.o" |
| tmake_file="${tmake_file} microblaze/t-microblaze" |
| tmake_file="${tmake_file} microblaze/t-rtems" |
| ;; |
| microblaze*-*-elf) |
| case $target in |
| microblazeel-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0" |
| ;; |
| microblaze-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321" |
| ;; |
| esac |
| tm_file="${tm_file} dbxelf.h newlib-stdint.h" |
| c_target_objs="${c_target_objs} microblaze-c.o" |
| cxx_target_objs="${cxx_target_objs} microblaze-c.o" |
| tmake_file="${tmake_file} microblaze/t-microblaze" |
| ;; |
| riscv*-*-linux*) |
| tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} riscv/linux.h" |
| case "x${enable_multilib}" in |
| xno) ;; |
| xyes) tmake_file="${tmake_file} riscv/t-linux-multilib" ;; |
| *) echo "Unknown value for enable_multilib"; exit 1 |
| esac |
| tmake_file="${tmake_file} riscv/t-riscv riscv/t-linux" |
| gnu_ld=yes |
| gas=yes |
| case $target in |
| riscv32be-*|riscv64be-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" |
| ;; |
| esac |
| # Force .init_array support. The configure script cannot always |
| # automatically detect that GAS supports it, yet we require it. |
| gcc_cv_initfini_array=yes |
| ;; |
| riscv*-*-elf* | riscv*-*-rtems*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} riscv/elf.h" |
| case ${target} in |
| *-*-rtems*) |
| tm_file="${tm_file} riscv/rtems.h rtems.h" |
| tmake_file="${tmake_file} riscv/t-rtems" |
| ;; |
| *) |
| if test "x${with_multilib_generator}" == xdefault; then |
| case "x${enable_multilib}" in |
| xno) ;; |
| xyes) tmake_file="${tmake_file} riscv/t-elf-multilib" ;; |
| *) echo "Unknown value for enable_multilib"; exit 1 |
| esac |
| fi |
| esac |
| tmake_file="${tmake_file} riscv/t-riscv" |
| gnu_ld=yes |
| gas=yes |
| case $target in |
| riscv32be-*|riscv64be-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" |
| ;; |
| esac |
| # Force .init_array support. The configure script cannot always |
| # automatically detect that GAS supports it, yet we require it. |
| gcc_cv_initfini_array=yes |
| ;; |
| riscv*-*-freebsd*) |
| tm_file="${tm_file} elfos.h ${fbsd_tm_file} riscv/freebsd.h" |
| tmake_file="${tmake_file} riscv/t-riscv" |
| gnu_ld=yes |
| gas=yes |
| case $target in |
| riscv32be-*|riscv64be-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" |
| ;; |
| esac |
| # Force .init_array support. The configure script cannot always |
| # automatically detect that GAS supports it, yet we require it. |
| gcc_cv_initfini_array=yes |
| ;; |
| |
| loongarch*-*-linux*) |
| tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file}" |
| tm_file="${tm_file} loongarch/gnu-user.h loongarch/linux.h" |
| extra_options="${extra_options} linux-android.opt" |
| tmake_file="${tmake_file} loongarch/t-linux" |
| gnu_ld=yes |
| gas=yes |
| |
| # Force .init_array support. The configure script cannot always |
| # automatically detect that GAS supports it, yet we require it. |
| gcc_cv_initfini_array=yes |
| ;; |
| |
| mips*-*-netbsd*) # NetBSD/mips, either endian. |
| target_cpu_default="MASK_ABICALLS" |
| tm_file="elfos.h ${tm_file} mips/elf.h ${nbsd_tm_file} mips/netbsd.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| ;; |
| mips*-img-linux*) |
| tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h" |
| extra_options="${extra_options} linux-android.opt" |
| tmake_file="${tmake_file} mips/t-img-linux" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6 MIPS_ABI_DEFAULT=ABI_32" |
| with_arch_32="mips32r6" |
| with_arch_64="mips64r6" |
| gnu_ld=yes |
| gas=yes |
| ;; |
| mips*-mti-linux*) |
| tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h" |
| extra_options="${extra_options} linux-android.opt" |
| tmake_file="${tmake_file} mips/t-mti-linux" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2 MIPS_ABI_DEFAULT=ABI_32" |
| with_arch_32="mips32r2" |
| with_arch_64="mips64r2" |
| gnu_ld=yes |
| gas=yes |
| ;; |
| mips*-*-linux*) # Linux MIPS, either endian. |
| tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h" |
| extra_options="${extra_options} linux-android.opt" |
| case ${target} in |
| mipsisa32r6*) |
| default_mips_arch=mips32r6 |
| ;; |
| mipsisa32r2*) |
| default_mips_arch=mips32r2 |
| ;; |
| mipsisa32*) |
| default_mips_arch=mips32 |
| ;; |
| mips64el-st-linux-gnu) |
| default_mips_abi=n32 |
| tm_file="${tm_file} mips/st.h" |
| tmake_file="${tmake_file} mips/t-st" |
| enable_mips_multilibs="yes" |
| ;; |
| mips64octeon*-*-linux*) |
| default_mips_abi=n32 |
| tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\"" |
| target_cpu_default=MASK_SOFT_FLOAT_ABI |
| enable_mips_multilibs="yes" |
| ;; |
| mipsisa64r6*-*-linux-gnuabi64) |
| default_mips_abi=64 |
| default_mips_arch=mips64r6 |
| enable_mips_multilibs="yes" |
| ;; |
| mipsisa64r6*-*-linux*) |
| default_mips_abi=n32 |
| default_mips_arch=mips64r6 |
| enable_mips_multilibs="yes" |
| ;; |
| mipsisa64r2*-*-linux-gnuabi64) |
| default_mips_abi=64 |
| default_mips_arch=mips64r2 |
| enable_mips_multilibs="yes" |
| ;; |
| mipsisa64r2*-*-linux*) |
| default_mips_abi=n32 |
| default_mips_arch=mips64r2 |
| enable_mips_multilibs="yes" |
| ;; |
| mips64*-*-linux-gnuabi64 | mipsisa64*-*-linux-gnuabi64) |
| default_mips_abi=64 |
| enable_mips_multilibs="yes" |
| ;; |
| mips64*-*-linux* | mipsisa64*-*-linux*) |
| default_mips_abi=n32 |
| enable_mips_multilibs="yes" |
| ;; |
| esac |
| if test x$enable_targets = xall; then |
| enable_mips_multilibs="yes" |
| fi |
| if test x$enable_mips_multilibs = xyes; then |
| tmake_file="${tmake_file} mips/t-linux64" |
| fi |
| ;; |
| mips*-mti-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h mips/sde.h mips/mti-elf.h" |
| tmake_file="mips/t-mti-elf" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2 MIPS_ABI_DEFAULT=ABI_32" |
| with_arch_32="mips32r2" |
| with_arch_64="mips64r2" |
| ;; |
| mips*-img-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h mips/sde.h mips/mti-elf.h" |
| tmake_file="mips/t-img-elf" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6 MIPS_ABI_DEFAULT=ABI_32" |
| with_arch_32="mips32r6" |
| with_arch_64="mips64r6" |
| ;; |
| mips*-sde-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h mips/sde.h" |
| tmake_file="mips/t-sde" |
| extra_options="${extra_options} mips/sde.opt" |
| case "${with_newlib}" in |
| yes) |
| # newlib / libgloss. |
| ;; |
| *) |
| # MIPS toolkit libraries. |
| tm_file="$tm_file mips/sdemtk.h" |
| tmake_file="$tmake_file mips/t-sdemtk" |
| case ${enable_threads} in |
| "" | yes | mipssde) |
| thread_file='mipssde' |
| ;; |
| esac |
| ;; |
| esac |
| case ${target} in |
| mipsisa32r6*) |
| tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6 MIPS_ABI_DEFAULT=ABI_32" |
| ;; |
| mipsisa32r2*) |
| tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2 MIPS_ABI_DEFAULT=ABI_32" |
| ;; |
| mipsisa32*) |
| tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32 MIPS_ABI_DEFAULT=ABI_32" |
| ;; |
| mipsisa64r6*) |
| tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R6 MIPS_ABI_DEFAULT=ABI_N32" |
| ;; |
| mipsisa64r2*) |
| tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R2 MIPS_ABI_DEFAULT=ABI_N32" |
| ;; |
| mipsisa64*) |
| tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64 MIPS_ABI_DEFAULT=ABI_N32" |
| ;; |
| esac |
| ;; |
| mipsisa32-*-elf* | mipsisa32el-*-elf* | \ |
| mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \ |
| mipsisa32r6-*-elf* | mipsisa32r6el-*-elf* | \ |
| mipsisa64-*-elf* | mipsisa64el-*-elf* | \ |
| mipsisa64r2-*-elf* | mipsisa64r2el-*-elf* | \ |
| mipsisa64r6-*-elf* | mipsisa64r6el-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h" |
| tmake_file="mips/t-isa3264" |
| case ${target} in |
| mipsisa32r6*) |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6" |
| ;; |
| mipsisa32r2*) |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2" |
| ;; |
| mipsisa32*) |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32" |
| ;; |
| mipsisa64r6*) |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R6" |
| ;; |
| mipsisa64r2*) |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R2" |
| ;; |
| mipsisa64*) |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64" |
| ;; |
| esac |
| case ${target} in |
| mipsisa32*-*-elfoabi*) |
| tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32" |
| tm_file="${tm_file} mips/elfoabi.h" |
| ;; |
| mipsisa64*-*-elfoabi*) |
| tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64" |
| tm_file="${tm_file} mips/elfoabi.h" |
| ;; |
| *-*-elf*) |
| tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI" |
| ;; |
| esac |
| ;; |
| mipsisa64sr71k-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h" |
| tmake_file=mips/t-sr71k |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI" |
| ;; |
| mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h" |
| tmake_file="mips/t-elf mips/t-sb1" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64" |
| ;; |
| mips-*-elf* | mipsel-*-elf* | mipsr5900-*-elf* | mipsr5900el-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h" |
| tmake_file="mips/t-elf" |
| ;; |
| mips64r5900-*-elf* | mips64r5900el-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h" |
| tmake_file="mips/t-elf" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3 MIPS_ABI_DEFAULT=ABI_N32" |
| ;; |
| mips64-*-elf* | mips64el-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h" |
| tmake_file="mips/t-elf" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3 MIPS_ABI_DEFAULT=ABI_O64" |
| ;; |
| mips64vr-*-elf* | mips64vrel-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h" |
| tmake_file=mips/t-vr |
| tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI" |
| ;; |
| mips64orion-*-elf* | mips64orionel-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h" |
| tmake_file="mips/t-elf" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3 MIPS_ABI_DEFAULT=ABI_O64" |
| ;; |
| mips*-*-rtems*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h" |
| tmake_file="${tmake_file} mips/t-elf mips/t-rtems" |
| ;; |
| mips-wrs-vxworks) |
| tm_file="elfos.h ${tm_file} mips/elf.h vx-common.h vxworks.h mips/vxworks.h" |
| tmake_file="${tmake_file} mips/t-vxworks" |
| ;; |
| mipstx39-*-elf* | mipstx39el-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h" |
| tmake_file="mips/t-r3900" |
| ;; |
| mmix-knuth-mmixware) |
| tm_file="${tm_file} newlib-stdint.h" |
| use_gcc_stdint=wrap |
| ;; |
| mn10300-*-*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file}" |
| use_collect2=no |
| use_gcc_stdint=wrap |
| ;; |
| msp430-*-*) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" |
| c_target_objs="msp430-c.o" |
| cxx_target_objs="msp430-c.o" |
| tmake_file="${tmake_file} msp430/t-msp430" |
| extra_objs="${extra_objs} msp430-devices.o" |
| extra_gcc_objs="driver-msp430.o msp430-devices.o" |
| # Enable .init_array unless it has been explicitly disabled. |
| # The MSP430 EABI mandates the use of .init_array, and the Newlib CRT |
| # code since mid-2019 expects it. |
| if test x${disable_initfini_array} != xyes; then |
| gcc_cv_initfini_array=yes |
| fi |
| case ${target} in |
| msp430-*-elfbare) |
| # __cxa_atexit increases code size, and we don't need to support |
| # dynamic shared objects on MSP430, so regular Newlib atexit is a |
| # fine replacement as it also supports registration of more than 32 |
| # functions. |
| default_use_cxa_atexit=no |
| # This target does not match the generic *-*-elf case above which |
| # sets use_gcc_stdint=wrap, so explicitly set it here. |
| use_gcc_stdint=wrap |
| ;; |
| esac |
| ;; |
| nds32*-*-*) |
| target_cpu_default="0" |
| tm_defines="${tm_defines}" |
| case ${target} in |
| nds32le*-*-*) |
| ;; |
| nds32be-*-*) |
| target_cpu_default="${target_cpu_default}|MASK_BIG_ENDIAN" |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" |
| ;; |
| esac |
| case ${target} in |
| nds32*-*-elf*) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} nds32/elf.h nds32/nds32_intrinsic.h" |
| tmake_file="nds32/t-nds32 nds32/t-elf" |
| ;; |
| nds32*-*-linux*) |
| tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h nds32/linux.h nds32/nds32_intrinsic.h" |
| tmake_file="${tmake_file} nds32/t-nds32 nds32/t-linux" |
| gcc_cv_initfini_array=yes |
| ;; |
| esac |
| |
| # Handle --enable-default-relax setting. |
| if test x${enable_default_relax} = xyes; then |
| tm_defines="${tm_defines} TARGET_DEFAULT_RELAX=1" |
| fi |
| # Handle --with-ext-dsp |
| if test x${with_ext_dsp} = xyes; then |
| tm_defines="${tm_defines} TARGET_DEFAULT_EXT_DSP=1" |
| fi |
| ;; |
| nios2-*-*) |
| tm_file="elfos.h ${tm_file}" |
| tmake_file="${tmake_file} nios2/t-nios2" |
| case ${target} in |
| nios2-*-linux*) |
| tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h nios2/linux.h " |
| ;; |
| nios2-*-elf*) |
| tm_file="${tm_file} newlib-stdint.h nios2/elf.h" |
| extra_options="${extra_options} nios2/elf.opt" |
| ;; |
| nios2-*-rtems*) |
| tm_file="${tm_file} newlib-stdint.h nios2/rtems.h rtems.h" |
| tmake_file="${tmake_file} t-rtems nios2/t-rtems" |
| ;; |
| esac |
| ;; |
| nvptx-*) |
| tm_file="${tm_file} newlib-stdint.h" |
| use_gcc_stdint=wrap |
| tmake_file="nvptx/t-nvptx" |
| if test x$enable_as_accelerator = xyes; then |
| extra_programs="${extra_programs} mkoffload\$(exeext)" |
| tm_file="${tm_file} nvptx/offload.h" |
| fi |
| ;; |
| or1k*-*-*) |
| tm_file="elfos.h ${tm_file}" |
| tmake_file="${tmake_file} or1k/t-or1k" |
| # Force .init_array support. The configure script cannot always |
| # automatically detect that GAS supports it, yet we require it. |
| gcc_cv_initfini_array=yes |
| |
| # Handle --with-multilib-list=... |
| or1k_multilibs="${with_multilib_list}" |
| if test "$or1k_multilibs" = "default"; then |
| or1k_multilibs="mcmov,msoft-mul,msoft-div" |
| fi |
| or1k_multilibs=`echo $or1k_multilibs | sed -e 's/,/ /g'` |
| for or1k_multilib in ${or1k_multilibs}; do |
| case ${or1k_multilib} in |
| mcmov | msext | msfimm | \ |
| mror | mrori | \ |
| mhard-float | mdouble-float | munordered-float | msoft-float | \ |
| mhard-div | mhard-mul | \ |
| msoft-div | msoft-mul ) |
| TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${or1k_multilib}" |
| ;; |
| *) |
| echo "--with-multilib-list=${with_multilib_list} not supported." |
| exit 1 |
| esac |
| done |
| TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'` |
| |
| case ${target} in |
| or1k*-*-linux*) |
| tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h" |
| tm_file="${tm_file} or1k/linux.h" |
| ;; |
| or1k*-*-elf*) |
| tm_file="${tm_file} newlib-stdint.h or1k/elf.h" |
| extra_options="${extra_options} or1k/elf.opt" |
| ;; |
| or1k*-*-rtems*) |
| tm_file="${tm_file} newlib-stdint.h or1k/rtems.h rtems.h" |
| tmake_file="${tmake_file} or1k/t-rtems" |
| ;; |
| esac |
| ;; |
| pdp11-*-*) |
| tm_file="${tm_file} newlib-stdint.h" |
| use_gcc_stdint=wrap |
| ;; |
| # port not yet contributed |
| #powerpc-*-openbsd*) |
| # tmake_file="${tmake_file} rs6000/t-fprules" |
| # extra_headers= |
| # ;; |
| powerpc-*-darwin*) |
| extra_options="${extra_options} ${cpu_type}/darwin.opt" |
| case ${target} in |
| *-darwin1[0-9]* | *-darwin9*) |
| tmake_file="${tmake_file} ${cpu_type}/t-darwin32-biarch" |
| tm_file="${tm_file} ${cpu_type}/darwin32-biarch.h" |
| ;; |
| *-darwin8*) |
| tmake_file="${tmake_file} ${cpu_type}/t-darwin32-biarch" |
| tm_file="${tm_file} ${cpu_type}/darwin32-biarch.h" |
| ;; |
| *-darwin7*) |
| tm_file="${tm_file} ${cpu_type}/darwin7.h" |
| ;; |
| *-darwin[456]*) |
| # Earlier - ingle arch, with 32b only |
| # OS X 10.0, the first edition is Darwin4 |
| ;; |
| esac |
| tmake_file="${tmake_file} t-slibgcc" |
| ;; |
| powerpc64-*-darwin*) |
| extra_options="${extra_options} ${cpu_type}/darwin.opt" |
| tmake_file="${tmake_file} ${cpu_type}/t-darwin64-biarch t-slibgcc" |
| tm_file="${tm_file} ${cpu_type}/darwin64-biarch.h" |
| ;; |
| powerpc*-*-freebsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h ${fbsd_tm_file} rs6000/sysv4.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" |
| case ${target} in |
| powerpc*le-*-*) |
| tm_file="${tm_file} rs6000/sysv4le.h" ;; |
| esac |
| case ${target} in |
| powerpc64*) |
| tm_file="${tm_file} rs6000/default64.h rs6000/freebsd64.h" |
| tmake_file="${tmake_file} rs6000/t-freebsd64" |
| extra_options="${extra_options} rs6000/linux64.opt" |
| if test $fbsd_major -ge 13; then |
| tm_defines="${tm_defines} TARGET_FREEBSD32_SECURE_PLT=1" |
| fi |
| ;; |
| *) |
| if test $fbsd_major -ge 13; then |
| tm_file="rs6000/secureplt.h ${tm_file}" |
| fi |
| tm_file="${tm_file} rs6000/freebsd.h" |
| ;; |
| esac |
| ;; |
| powerpc-*-netbsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h ${nbsd_tm_file} freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| tmake_file="${tmake_file} rs6000/t-netbsd" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| ;; |
| powerpc-*-eabisimaltivec*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm" |
| use_gcc_stdint=wrap |
| ;; |
| powerpc-*-eabisim*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| use_gcc_stdint=wrap |
| ;; |
| powerpc-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| ;; |
| powerpc-*-eabialtivec*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm" |
| use_gcc_stdint=wrap |
| ;; |
| powerpc-*-eabi*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| use_gcc_stdint=wrap |
| ;; |
| powerpc-*-rtems*) |
| tm_file="rs6000/biarch64.h ${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/rtems.h rtems.h" |
| extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt" |
| tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-rtems rs6000/t-ppccomm" |
| ;; |
| powerpc*-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h freebsd-spec.h rs6000/sysv4.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm" |
| extra_objs="$extra_objs rs6000-linux.o" |
| case ${target} in |
| powerpc*le-*-*) |
| tm_file="${tm_file} rs6000/sysv4le.h" ;; |
| esac |
| case ${target}:${with_cpu} in |
| powerpc64*: | powerpc64*:native) cpu_is_64bit=yes ;; |
| esac |
| maybe_biarch=${cpu_is_64bit} |
| case ${enable_targets} in |
| *powerpc64*) maybe_biarch=yes ;; |
| all) maybe_biarch=yes ;; |
| esac |
| case ${target}:${enable_targets}:${maybe_biarch} in |
| powerpc64-* | powerpc-*:*:yes | *:*powerpc64-*:yes | *:all:yes \ |
| | powerpc64le*:*powerpcle* | powerpc64le*:*powerpc-* \ |
| | powerpcle-*:*powerpc64le*:yes) |
| if test x$cpu_is_64bit = xyes; then |
| tm_file="${tm_file} rs6000/default64.h" |
| fi |
| tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h" |
| tmake_file="$tmake_file rs6000/t-linux64" |
| case ${target} in |
| powerpc*le-*-*) |
| tmake_file="$tmake_file rs6000/t-linux64le" |
| case ${enable_targets} in |
| all | *powerpc64-* | *powerpc-*) |
| tmake_file="$tmake_file rs6000/t-linux64lebe" ;; |
| esac ;; |
| *) |
| case ${enable_targets} in |
| all | *powerpc64le-* | *powerpcle-*) |
| tmake_file="$tmake_file rs6000/t-linux64bele" ;; |
| esac ;; |
| esac |
| extra_options="${extra_options} rs6000/linux64.opt" |
| ;; |
| powerpc64*) |
| tm_file="${tm_file} rs6000/default64.h rs6000/linux64.h glibc-stdint.h" |
| extra_options="${extra_options} rs6000/linux64.opt" |
| tmake_file="${tmake_file} rs6000/t-linux" |
| ;; |
| *) |
| tm_file="${tm_file} rs6000/linux.h glibc-stdint.h" |
| tmake_file="${tmake_file} rs6000/t-ppcos rs6000/t-linux" |
| ;; |
| esac |
| case ${target} in |
| powerpc*-*-linux*ppc476*) |
| tm_file="${tm_file} rs6000/476.h" |
| extra_options="${extra_options} rs6000/476.opt" ;; |
| powerpc*-*-linux*altivec*) |
| tm_file="${tm_file} rs6000/linuxaltivec.h" ;; |
| esac |
| case ${target} in |
| *-linux*-musl*) |
| enable_secureplt=yes ;; |
| esac |
| if test x${enable_secureplt} = xyes; then |
| tm_file="rs6000/secureplt.h ${tm_file}" |
| fi |
| ;; |
| powerpc*-wrs-vxworks7r*) |
| |
| # Wind River 7 post SR0600 is mostly like Linux so we setup |
| # our config in a very similar fashion and adjust to a few |
| # specificities. |
| |
| # The system compiler is configured with secureplt by default. |
| tm_file="${tm_file} rs6000/secureplt.h" |
| |
| tm_file="${tm_file} elfos.h gnu-user.h linux.h freebsd-spec.h" |
| tm_file="${tm_file} rs6000/sysv4.h rs6000/biarch64.h rs6000/default64.h rs6000/linux64.h" |
| tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h" |
| |
| extra_options="${extra_options} rs6000/sysv4.opt linux.opt rs6000/linux64.opt" |
| |
| tmake_file="${tmake_file} t-linux rs6000/t-linux64 rs6000/t-fprules rs6000/t-ppccomm" |
| tmake_file="${tmake_file} rs6000/t-vxworks" |
| |
| tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC" |
| extra_objs="$extra_objs linux.o rs6000-linux.o" |
| ;; |
| powerpc-wrs-vxworks*) |
| tm_file="${tm_file} elfos.h gnu-user.h freebsd-spec.h rs6000/sysv4.h" |
| tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| extra_headers="${extra_headers} ppc-asm.h" |
| case ${target} in |
| *-vxworksmils*) |
| tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksmils.h" |
| tmake_file="${tmake_file} rs6000/t-vxworksmils" |
| ;; |
| *-vxworksae*) |
| tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksae.h" |
| tmake_file="${tmake_file} rs6000/t-vxworksae" |
| ;; |
| *-vxworks*) |
| tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h" |
| ;; |
| esac |
| ;; |
| powerpc-*-lynxos*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h rs6000/sysv4.h rs6000/lynx.h lynx.h" |
| tmake_file="t-lynx rs6000/t-lynx" |
| extra_options="${extra_options} rs6000/sysv4.opt lynx.opt" |
| thread_file=lynx |
| gnu_ld=yes |
| gas=yes |
| ;; |
| powerpcle-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| ;; |
| powerpcle-*-eabisim*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| use_gcc_stdint=wrap |
| ;; |
| powerpcle-*-eabi*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| use_gcc_stdint=wrap |
| ;; |
| pru*-*-*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file}" |
| tmake_file="${tmake_file} pru/t-pru" |
| extra_objs="pru-pragma.o pru-passes.o" |
| use_gcc_stdint=wrap |
| ;; |
| rs6000-ibm-aix7.1.* | powerpc-ibm-aix7.1.*) |
| tmake_file="rs6000/t-aix52 t-slibgcc" |
| if test x$cpu_is_64bit = xyes; then |
| tm_file="${tm_file} rs6000/biarch64.h" |
| tmake_file="rs6000/t-aix64 t-slibgcc" |
| fi |
| tm_file="${tm_file} rs6000/aix.h rs6000/aix71.h rs6000/xcoff.h rs6000/aix-stdint.h" |
| extra_options="${extra_options} rs6000/aix64.opt" |
| use_collect2=yes |
| thread_file='aix' |
| use_gcc_stdint=wrap |
| default_use_cxa_atexit=yes |
| ;; |
| rs6000-ibm-aix7.2.* | powerpc-ibm-aix7.2.*) |
| tmake_file="rs6000/t-aix52 t-slibgcc" |
| if test x$cpu_is_64bit = xyes; then |
| tm_file="${tm_file} rs6000/biarch64.h" |
| tmake_file="rs6000/t-aix64 t-slibgcc" |
| fi |
| tm_file="${tm_file} rs6000/aix.h rs6000/aix72.h rs6000/xcoff.h rs6000/aix-stdint.h" |
| extra_options="${extra_options} rs6000/aix64.opt" |
| use_collect2=yes |
| thread_file='aix' |
| use_gcc_stdint=wrap |
| default_use_cxa_atexit=yes |
| ;; |
| rs6000-ibm-aix[789].* | powerpc-ibm-aix[789].*) |
| tmake_file="rs6000/t-aix52 t-slibgcc" |
| if test x$cpu_is_64bit = xyes; then |
| tm_file="${tm_file} rs6000/biarch64.h" |
| tmake_file="rs6000/t-aix64 t-slibgcc" |
| fi |
| tm_file="${tm_file} rs6000/aix.h rs6000/aix73.h rs6000/xcoff.h rs6000/aix-stdint.h" |
| extra_options="${extra_options} rs6000/aix64.opt" |
| use_collect2=yes |
| thread_file='aix' |
| use_gcc_stdint=wrap |
| default_use_cxa_atexit=yes |
| ;; |
| rl78-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file}" |
| target_has_targetm_common=no |
| c_target_objs="rl78-c.o" |
| cxx_target_objs="rl78-c.o" |
| tmake_file="${tmake_file} rl78/t-rl78" |
| ;; |
| rx-*-elf*) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" |
| tmake_file="${tmake_file} rx/t-rx" |
| extra_options="${extra_options} rx/elf.opt" |
| ;; |
| rx-*-linux*) |
| tm_file="elfos.h linux.h glibc-stdint.h rx/linux.h ../../libgcc/config/rx/rx-abi.h" |
| tmake_file="${tmake_file} rx/t-linux" |
| ;; |
| s390-*-linux*) |
| tm_file="s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h" |
| c_target_objs="${c_target_objs} s390-c.o" |
| cxx_target_objs="${cxx_target_objs} s390-c.o" |
| if test x$enable_targets = xall; then |
| tmake_file="${tmake_file} s390/t-linux64" |
| fi |
| tmake_file="${tmake_file} s390/t-s390" |
| ;; |
| s390x-*-linux*) |
| tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h" |
| tm_p_file="linux-protos.h s390/s390-protos.h" |
| c_target_objs="${c_target_objs} s390-c.o" |
| cxx_target_objs="${cxx_target_objs} s390-c.o" |
| md_file=s390/s390.md |
| extra_modes=s390/s390-modes.def |
| out_file=s390/s390.cc |
| tmake_file="${tmake_file} s390/t-linux64 s390/t-s390" |
| ;; |
| s390x-ibm-tpf*) |
| tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h glibc-stdint.h s390/tpf.h" |
| tm_p_file=s390/s390-protos.h |
| c_target_objs="${c_target_objs} s390-c.o" |
| cxx_target_objs="${cxx_target_objs} s390-c.o" |
| md_file=s390/s390.md |
| extra_modes=s390/s390-modes.def |
| out_file=s390/s390.cc |
| thread_file='tpf' |
| extra_options="${extra_options} s390/tpf.opt" |
| tmake_file="${tmake_file} s390/t-s390" |
| ;; |
| sh-*-elf* | sh[12346l]*-*-elf* | \ |
| sh-*-linux* | sh[2346lbe]*-*-linux* | \ |
| sh-*-netbsdelf* | shl*-*-netbsdelf*) |
| tmake_file="${tmake_file} sh/t-sh sh/t-elf" |
| if test x${with_endian} = x; then |
| case ${target} in |
| sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;; |
| shbe-*-* | sheb-*-*) with_endian=big,little ;; |
| sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;; |
| shl* | sh*-*-linux* | \ |
| sh-superh-elf) with_endian=little,big ;; |
| sh[1234]*-*-*) with_endian=big ;; |
| *) with_endian=big,little ;; |
| esac |
| fi |
| # TM_ENDIAN_CONFIG is used by t-sh to determine multilibs. |
| # First word : the default endian. |
| # Second word: the secondary endian (optional). |
| case ${with_endian} in |
| big) TM_ENDIAN_CONFIG=mb ;; |
| little) TM_ENDIAN_CONFIG=ml ;; |
| big,little) TM_ENDIAN_CONFIG="mb ml" ;; |
| little,big) TM_ENDIAN_CONFIG="ml mb" ;; |
| *) echo "with_endian=${with_endian} not supported."; exit 1 ;; |
| esac |
| case ${with_endian} in |
| little*) tm_file="sh/little.h ${tm_file}" ;; |
| esac |
| tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h" |
| case ${target} in |
| sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux" |
| if test x$enable_fdpic = xyes; then |
| tm_defines="$tm_defines FDPIC_DEFAULT=1" |
| fi |
| tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h sh/linux.h" ;; |
| sh*-*-netbsd*) |
| tm_file="${tm_file} ${nbsd_tm_file} sh/netbsd-elf.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| |
| ;; |
| sh*-superh-elf) if test x$with_libgloss != xno; then |
| with_libgloss=yes |
| tm_file="${tm_file} sh/newlib.h" |
| fi |
| tm_file="${tm_file} sh/embed-elf.h" |
| tm_file="${tm_file} sh/superh.h" |
| extra_options="${extra_options} sh/superh.opt" ;; |
| *) if test x$with_newlib = xyes \ |
| && test x$with_libgloss = xyes; then |
| tm_file="${tm_file} sh/newlib.h" |
| fi |
| tm_file="${tm_file} sh/embed-elf.h" ;; |
| esac |
| case ${target} in |
| *-*-netbsd) |
| ;; |
| *-*-elf*) |
| tm_file="${tm_file} newlib-stdint.h" |
| ;; |
| esac |
| # sed el/eb endian suffixes away to avoid confusion with sh[23]e |
| case `echo ${target} | sed 's/e[lb]-/-/'` in |
| sh4a_single_only*) sh_cpu_target=sh4a-single-only ;; |
| sh4a_single*) sh_cpu_target=sh4a-single ;; |
| sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;; |
| sh4al) sh_cpu_target=sh4al ;; |
| sh4a*) sh_cpu_target=sh4a ;; |
| sh4_single_only*) sh_cpu_target=sh4-single-only ;; |
| sh4_single*) sh_cpu_target=sh4-single ;; |
| sh4_nofpu*) sh_cpu_target=sh4-nofpu ;; |
| sh4* | sh-superh-*) sh_cpu_target=sh4 ;; |
| sh3e*) sh_cpu_target=sh3e ;; |
| sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;; |
| sh2a_single_only*) sh_cpu_target=sh2a-single-only ;; |
| sh2a_single*) sh_cpu_target=sh2a-single ;; |
| sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;; |
| sh2a*) sh_cpu_target=sh2a ;; |
| sh2e*) sh_cpu_target=sh2e ;; |
| sh2*) sh_cpu_target=sh2 ;; |
| *) sh_cpu_target=sh1 ;; |
| esac |
| # did the user say --without-fp ? |
| if test x$with_fp = xno; then |
| case ${sh_cpu_target} in |
| sh4al | sh1) ;; |
| sh4a* ) sh_cpu_target=sh4a-nofpu ;; |
| sh4*) sh_cpu_target=sh4-nofpu ;; |
| sh3*) sh_cpu_target=sh3 ;; |
| sh2a*) sh_cpu_target=sh2a-nofpu ;; |
| sh2*) sh_cpu_target=sh2 ;; |
| *) echo --without-fp not available for $target: ignored |
| esac |
| tm_defines="$tm_defines STRICT_NOFPU=1" |
| fi |
| sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`" |
| case $sh_cpu_default in |
| sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \ |
| sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \ |
| sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \ |
| sh3e | sh3 | sh2e | sh2 | sh1) ;; |
| "") sh_cpu_default=${sh_cpu_target} ;; |
| *) echo "with_cpu=$with_cpu not supported"; exit 1 ;; |
| esac |
| sh_multilibs=${with_multilib_list} |
| if test "$sh_multilibs" = "default" ; then |
| case ${target} in |
| sh[1234]*) sh_multilibs=${sh_cpu_target} ;; |
| sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;; |
| sh*-*-linux*) sh_multilibs=m1,m2,m2a,m3e,m4 ;; |
| sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;; |
| *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;; |
| esac |
| if test x$with_fp = xno; then |
| sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`" |
| fi |
| fi |
| target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_` |
| tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"' |
| tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1" |
| sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^[Ss][Hh]/m/' -e 's/ [Ss][Hh]/ m/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-` |
| for sh_multilib in ${sh_multilibs}; do |
| case ${sh_multilib} in |
| m1 | m2 | m2e | m3 | m3e | \ |
| m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\ |
| m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \ |
| m2a | m2a-single | m2a-single-only | m2a-nofpu) |
| # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition |
| # It is passed to MULTIILIB_OPTIONS verbatim. |
| TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}" |
| tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1" |
| ;; |
| \!*) # TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh |
| # It is passed the MULTILIB_EXCEPTIONS verbatim. |
| TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;; |
| *) |
| echo "with_multilib_list=${sh_multilib} not supported." |
| exit 1 |
| ;; |
| esac |
| done |
| TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'` |
| if test x${enable_incomplete_targets} = xyes ; then |
| tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1" |
| fi |
| tm_file="$tm_file ./sysroot-suffix.h" |
| tmake_file="$tmake_file t-sysroot-suffix" |
| ;; |
| sh-*-rtems*) |
| tmake_file="${tmake_file} sh/t-sh sh/t-rtems" |
| tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h" |
| ;; |
| sh-wrs-vxworks) |
| tmake_file="$tmake_file sh/t-sh sh/t-vxworks" |
| tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h" |
| ;; |
| sparc-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h" |
| case ${target} in |
| *-leon-*) |
| tmake_file="sparc/t-sparc sparc/t-leon" |
| ;; |
| *-leon[3-9]*) |
| tmake_file="sparc/t-sparc sparc/t-leon3" |
| ;; |
| *) |
| tmake_file="sparc/t-sparc sparc/t-elf" |
| ;; |
| esac |
| ;; |
| sparc-*-rtems*) |
| tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h" |
| tmake_file="${tmake_file} sparc/t-sparc sparc/t-rtems" |
| ;; |
| sparc-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/tso.h" |
| extra_options="${extra_options} sparc/long-double-switch.opt" |
| case ${target} in |
| *-leon-*) |
| tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon" |
| ;; |
| *-leon[3-9]*) |
| tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon3" |
| ;; |
| *) |
| tmake_file="${tmake_file} sparc/t-sparc" |
| ;; |
| esac |
| if test x$enable_targets = xall; then |
| tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h" |
| tmake_file="${tmake_file} sparc/t-linux64" |
| else |
| tm_file="${tm_file} sparc/linux.h" |
| tmake_file="${tmake_file} sparc/t-linux" |
| fi |
| ;; |
| sparc-*-netbsdelf*) |
| tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h ${nbsd_tm_file} sparc/netbsd-elf.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| extra_options="${extra_options} sparc/long-double-switch.opt" |
| tmake_file="${tmake_file} sparc/t-sparc" |
| ;; |
| sparc*-*-solaris2*) |
| tm_file="sparc/biarch64.h ${tm_file} ${sol2_tm_file} sparc/tso.h" |
| case ${target} in |
| sparc64-*-* | sparcv9-*-*) |
| tm_file="sparc/default64.h ${tm_file}" |
| ;; |
| *) |
| test x$with_cpu != x || with_cpu=v9 |
| ;; |
| esac |
| tmake_file="${tmake_file} sparc/t-sparc sparc/t-sol2" |
| ;; |
| sparc-wrs-vxworks) |
| tm_file="${tm_file} elfos.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h" |
| tmake_file="${tmake_file} sparc/t-sparc sparc/t-vxworks" |
| ;; |
| sparc64-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h" |
| extra_options="${extra_options}" |
| tmake_file="${tmake_file} sparc/t-sparc" |
| ;; |
| sparc64-*-rtems*) |
| tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h" |
| extra_options="${extra_options}" |
| tmake_file="${tmake_file} sparc/t-sparc sparc/t-rtems-64" |
| ;; |
| sparc64-*-linux*) |
| tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/default64.h sparc/linux64.h sparc/tso.h" |
| extra_options="${extra_options} sparc/long-double-switch.opt" |
| tmake_file="${tmake_file} sparc/t-sparc sparc/t-linux64" |
| ;; |
| sparc64-*-freebsd*|ultrasparc-*-freebsd*) |
| tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h" |
| extra_options="${extra_options} sparc/long-double-switch.opt" |
| case "x$with_cpu" in |
| xultrasparc) ;; |
| x) with_cpu=ultrasparc ;; |
| *) echo "$with_cpu not supported for freebsd target"; exit 1 ;; |
| esac |
| tmake_file="${tmake_file} sparc/t-sparc" |
| ;; |
| sparc64-*-netbsd*) |
| tm_file="sparc/biarch64.h ${tm_file}" |
| tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h ${nbsd_tm_file} sparc/netbsd-elf.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| extra_options="${extra_options} sparc/long-double-switch.opt" |
| tmake_file="${tmake_file} sparc/t-sparc sparc/t-netbsd64" |
| ;; |
| sparc64-*-openbsd*) |
| tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp64-elf.h" |
| tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h" |
| extra_options="${extra_options} openbsd.opt" |
| extra_options="${extra_options}" |
| gas=yes gnu_ld=yes |
| with_cpu=ultrasparc |
| tmake_file="${tmake_file} sparc/t-sparc" |
| ;; |
| tic6x-*-elf) |
| tm_file="elfos.h ${tm_file} c6x/elf-common.h c6x/elf.h" |
| tm_file="${tm_file} dbxelf.h tm-dwarf2.h newlib-stdint.h" |
| tmake_file="c6x/t-c6x c6x/t-c6x-elf" |
| use_collect2=no |
| ;; |
| tic6x-*-uclinux) |
| tm_file="elfos.h ${tm_file} gnu-user.h linux.h c6x/elf-common.h c6x/uclinux-elf.h" |
| tm_file="${tm_file} dbxelf.h tm-dwarf2.h glibc-stdint.h" |
| tm_file="${tm_file} ./sysroot-suffix.h" |
| tmake_file="t-sysroot-suffix t-slibgcc" |
| tmake_file="${tmake_file} c6x/t-c6x c6x/t-c6x-elf c6x/t-c6x-uclinux" |
| use_collect2=no |
| ;; |
| v850-*-rtems*) |
| target_cpu_default="TARGET_CPU_generic" |
| tm_file="elfos.h v850/v850.h" |
| tm_file="${tm_file} v850/rtems.h rtems.h newlib-stdint.h" |
| tmake_file="${tmake_file} v850/t-v850" |
| tmake_file="${tmake_file} v850/t-rtems" |
| use_collect2=no |
| c_target_objs="v850-c.o" |
| cxx_target_objs="v850-c.o" |
| ;; |
| v850*-*-*) |
| case ${target} in |
| v850e3v5-*-*) |
| target_cpu_default="TARGET_CPU_v850e3v5" |
| ;; |
| v850e2v3-*-*) |
| target_cpu_default="TARGET_CPU_v850e2v3" |
| ;; |
| v850e2-*-*) |
| target_cpu_default="TARGET_CPU_v850e2" |
| ;; |
| v850e1-*-* | v850es-*-*) |
| target_cpu_default="TARGET_CPU_v850e1" |
| ;; |
| v850e-*-*) |
| target_cpu_default="TARGET_CPU_v850e" |
| ;; |
| v850-*-*) |
| target_cpu_default="TARGET_CPU_generic" |
| ;; |
| esac |
| tm_file="elfos.h newlib-stdint.h v850/v850.h" |
| use_collect2=no |
| c_target_objs="v850-c.o" |
| cxx_target_objs="v850-c.o" |
| use_gcc_stdint=wrap |
| ;; |
| vax-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h vax/elf.h vax/linux.h" |
| extra_options="${extra_options} vax/elf.opt" |
| ;; |
| vax-*-netbsdelf*) |
| tm_file="${tm_file} elfos.h ${nbsd_tm_file} vax/elf.h vax/netbsd-elf.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt vax/elf.opt" |
| tm_defines="${tm_defines} CHAR_FAST8=1 SHORT_FAST16=1" |
| ;; |
| visium-*-elf*) |
| tm_file="dbxelf.h elfos.h ${tm_file} visium/elf.h newlib-stdint.h" |
| tmake_file="visium/t-visium visium/t-crtstuff" |
| ;; |
| xstormy16-*-elf) |
| # For historical reasons, the target files omit the 'x'. |
| tm_file="dbxelf.h elfos.h newlib-stdint.h stormy16/stormy16.h" |
| tm_p_file=stormy16/stormy16-protos.h |
| tm_d_file="elfos.h stormy16/stormy16.h" |
| md_file=stormy16/stormy16.md |
| out_file=stormy16/stormy16.cc |
| extra_options=stormy16/stormy16.opt |
| tmake_file="stormy16/t-stormy16" |
| ;; |
| xtensa*-*-elf*) |
| tm_file="${tm_file} elfos.h newlib-stdint.h xtensa/elf.h" |
| extra_options="${extra_options} xtensa/elf.opt" |
| ;; |
| xtensa*-*-linux*) |
| tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/linux.h" |
| tmake_file="${tmake_file} xtensa/t-xtensa" |
| ;; |
| xtensa*-*-uclinux*) |
| tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/uclinux.h" |
| tmake_file="${tmake_file} xtensa/t-xtensa" |
| extra_options="${extra_options} xtensa/uclinux.opt" |
| ;; |
| am33_2.0-*-linux*) |
| tm_file="mn10300/mn10300.h elfos.h gnu-user.h linux.h glibc-stdint.h mn10300/linux.h" |
| gas=yes gnu_ld=yes |
| use_collect2=no |
| ;; |
| m32c-*-rtems*) |
| tm_file="elfos.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h" |
| c_target_objs="m32c-pragma.o" |
| cxx_target_objs="m32c-pragma.o" |
| ;; |
| m32c-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file}" |
| c_target_objs="m32c-pragma.o" |
| cxx_target_objs="m32c-pragma.o" |
| ;; |
| *) |
| echo "*** Configuration ${target} not supported" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${target} in |
| i[34567]86-*-linux* | x86_64-*-linux*) |
| tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386" |
| ;; |
| i[34567]86-*-* | x86_64-*-*) |
| tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386" |
| ;; |
| powerpc*-*-* | rs6000-*-*) |
| tm_file="${tm_file} ${cpu_type}/option-defaults.h" |
| esac |
| |
| # non-glibc systems |
| case ${target} in |
| *-linux-musl*) |
| tmake_file="${tmake_file} t-musl" |
| ;; |
| *-linux-uclibc*) |
| tmake_file="${tmake_file} t-uclibc" |
| ;; |
| esac |
| |
| # Assume the existence of indirect function support and allow the use of the |
| # resolver attribute. |
| case ${target} in |
| *-*-linux*android*|*-*-linux*uclibc*|*-*-linux*musl*) |
| ;; |
| *-*-kfreebsd*-gnu | *-*-kopensolaris*-gnu) |
| ;; |
| *-*-linux* | *-*-gnu*) |
| case ${target} in |
| aarch64*-* | arm*-* | i[34567]86-* | powerpc*-* | s390*-* | sparc*-* | x86_64-* | loongarch*-*) |
| default_gnu_indirect_function=yes |
| ;; |
| esac |
| ;; |
| esac |
| |
| # Build mkoffload tool |
| case ${target} in |
| *-intelmic-* | *-intelmicemul-*) |
| tmake_file="${tmake_file} i386/t-intelmic" |
| tm_file="${tm_file} i386/intelmic-offload.h" |
| ;; |
| esac |
| |
| if [ "$target_has_targetcm" = "no" ]; then |
| c_target_objs="$c_target_objs default-c.o" |
| cxx_target_objs="$cxx_target_objs default-c.o" |
| fi |
| |
| if [ "$common_out_file" = "" ]; then |
| if [ "$target_has_targetm_common" = "yes" ]; then |
| common_out_file="$cpu_type/$cpu_type-common.cc" |
| else |
| common_out_file="default-common.cc" |
| fi |
| fi |
| |
| if [ "$target_has_targetdm" = "no" ]; then |
| d_target_objs="$d_target_objs default-d.o" |
| fi |
| |
| # Support for --with-cpu and related options (and a few unrelated options, |
| # too). |
| case ${with_cpu} in |
| yes | no) |
| echo "--with-cpu must be passed a value" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| # Set arch and cpu from ${target} and ${target_noncanonical}. Set cpu |
| # to generic if there is no processor scheduler model for the target. |
| arch= |
| cpu= |
| arch_without_sse2=no |
| arch_without_64bit=no |
| case ${target} in |
| i386-*-freebsd*) |
| if test $fbsd_major -ge 6; then |
| arch=i486 |
| else |
| arch=i386 |
| fi |
| cpu=generic |
| arch_without_sse2=yes |
| arch_without_64bit=yes |
| ;; |
| i386-*-netbsd*) |
| arch=i486 |
| cpu=generic |
| arch_without_sse2=yes |
| arch_without_64bit=yes |
| ;; |
| i386-*-*) |
| arch=i386 |
| cpu=i386 |
| arch_without_sse2=yes |
| arch_without_64bit=yes |
| ;; |
| i486-*-*) |
| arch=i486 |
| cpu=i486 |
| arch_without_sse2=yes |
| arch_without_64bit=yes |
| ;; |
| i586-*-*) |
| arch_without_sse2=yes |
| arch_without_64bit=yes |
| case ${target_noncanonical} in |
| k6_2-*) |
| arch=k6-2 |
| cpu=k6-2 |
| ;; |
| k6_3-*) |
| arch=k6-3 |
| cpu=k6-3 |
| ;; |
| k6-*) |
| arch=k6 |
| cpu=k6 |
| ;; |
| pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*) |
| arch=pentium-mmx |
| cpu=pentium-mmx |
| ;; |
| *) |
| arch=pentium |
| cpu=pentium |
| ;; |
| esac |
| ;; |
| i686-*-* | i786-*-*) |
| case ${target_noncanonical} in |
| znver1-*) |
| arch=znver1 |
| cpu=znver1 |
| ;; |
| znver2-*) |
| arch=znver2 |
| cpu=znver2 |
| ;; |
| znver3-*) |
| arch=znver3 |
| cpu=znver3 |
| ;; |
| bdver4-*) |
| arch=bdver4 |
| cpu=bdver4 |
| ;; |
| bdver3-*) |
| arch=bdver3 |
| cpu=bdver3 |
| ;; |
| bdver2-*) |
| arch=bdver2 |
| cpu=bdver2 |
| ;; |
| bdver1-*) |
| arch=bdver1 |
| cpu=bdver1 |
| ;; |
| btver1-*) |
| arch=btver1 |
| cpu=btver1 |
| ;; |
| btver2-*) |
| arch=btver2 |
| cpu=btver2 |
| ;; |
| amdfam10-*|barcelona-*) |
| arch=amdfam10 |
| cpu=amdfam10 |
| ;; |
| k8_sse3-*|opteron_sse3-*|athlon64_sse3-*) |
| arch=k8-sse3 |
| cpu=k8-sse3 |
| ;; |
| k8-*|opteron-*|athlon64-*|athlon_fx-*) |
| arch=k8 |
| cpu=k8 |
| ;; |
| athlon_xp-*|athlon_mp-*|athlon_4-*) |
| arch=athlon-4 |
| cpu=athlon-4 |
| arch_without_sse2=yes |
| arch_without_64bit=yes |
| ;; |
| athlon_tbird-*|athlon-*) |
| arch=athlon |
| cpu=athlon |
| arch_without_sse2=yes |
| ;; |
| geode-*) |
| arch=geode |
| cpu=geode |
| arch_without_sse2=yes |
| ;; |
| lujiazui-*) |
| arch=lujiazui |
| cpu=lujiazui |
| ;; |
| pentium2-*) |
| arch=pentium2 |
| cpu=pentium2 |
| arch_without_sse2=yes |
| ;; |
| pentium3-*|pentium3m-*) |
| arch=pentium3 |
| cpu=pentium3 |
| arch_without_sse2=yes |
| ;; |
| pentium4-*|pentium4m-*) |
| arch=pentium4 |
| cpu=pentium4 |
| ;; |
| prescott-*) |
| arch=prescott |
| cpu=prescott |
| ;; |
| nocona-*) |
| arch=nocona |
| cpu=nocona |
| ;; |
| atom-*) |
| arch=atom |
| cpu=atom |
| ;; |
| slm-*) |
| arch=slm |
| cpu=slm |
| ;; |
| core2-*) |
| arch=core2 |
| cpu=core2 |
| ;; |
| corei7-*) |
| arch=corei7 |
| cpu=corei7 |
| ;; |
| corei7_avx-*) |
| arch=corei7-avx |
| cpu=corei7-avx |
| ;; |
| pentium_m-*) |
| arch=pentium-m |
| cpu=pentium-m |
| ;; |
| pentiumpro-*) |
| arch=pentiumpro |
| cpu=pentiumpro |
| arch_without_sse2=yes |
| ;; |
| *) |
| arch=pentiumpro |
| cpu=generic |
| arch_without_sse2=yes |
| arch_without_64bit=yes |
| ;; |
| esac |
| ;; |
| x86_64-*-*) |
| case ${target_noncanonical} in |
| znver1-*) |
| arch=znver1 |
| cpu=znver1 |
| ;; |
| znver2-*) |
| arch=znver2 |
| cpu=znver2 |
| ;; |
| znver3-*) |
| arch=znver3 |
| cpu=znver3 |
| ;; |
| bdver4-*) |
| arch=bdver4 |
| cpu=bdver4 |
| ;; |
| bdver3-*) |
| arch=bdver3 |
| cpu=bdver3 |
| ;; |
| bdver2-*) |
| arch=bdver2 |
| cpu=bdver2 |
| ;; |
| bdver1-*) |
| arch=bdver1 |
| cpu=bdver1 |
| ;; |
| btver1-*) |
| arch=btver1 |
| cpu=btver1 |
| ;; |
| btver2-*) |
| arch=btver2 |
| cpu=btver2 |
| ;; |
| amdfam10-*|barcelona-*) |
| arch=amdfam10 |
| cpu=amdfam10 |
| ;; |
| k8_sse3-*|opteron_sse3-*|athlon64_sse3-*) |
| arch=k8-sse3 |
| cpu=k8-sse3 |
| ;; |
| k8-*|opteron-*|athlon_64-*) |
| arch=k8 |
| cpu=k8 |
| ;; |
| lujiazui-*) |
| arch=lujiazui |
| cpu=lujiazui |
| ;; |
| nocona-*) |
| arch=nocona |
| cpu=nocona |
| ;; |
| atom-*) |
| arch=atom |
| cpu=atom |
| ;; |
| slm-*) |
| arch=slm |
| cpu=slm |
| ;; |
| core2-*) |
| arch=core2 |
| cpu=core2 |
| ;; |
| corei7-*) |
| arch=corei7 |
| cpu=corei7 |
| ;; |
| *) |
| arch=x86-64 |
| cpu=generic |
| ;; |
| esac |
| ;; |
| esac |
| |
| # If there is no $with_cpu option, try to infer one from ${target}. |
| # This block sets nothing except for with_cpu. |
| if test x$with_cpu = x ; then |
| case ${target} in |
| i[34567]86-*-elfiamcu) |
| with_cpu=lakemont |
| ;; |
| i[34567]86-*-*|x86_64-*-*) |
| with_cpu=$cpu |
| ;; |
| alphaev6[78]*-*-*) |
| with_cpu=ev67 |
| ;; |
| alphaev6*-*-*) |
| with_cpu=ev6 |
| ;; |
| alphapca56*-*-*) |
| with_cpu=pca56 |
| ;; |
| alphaev56*-*-*) |
| with_cpu=ev56 |
| ;; |
| alphaev5*-*-*) |
| with_cpu=ev5 |
| ;; |
| frv-*-*linux* | frv400-*-*linux*) |
| with_cpu=fr400 |
| ;; |
| frv550-*-*linux*) |
| with_cpu=fr550 |
| ;; |
| m68k*-*-*) |
| case "$with_arch" in |
| "cf") |
| with_cpu=${default_cf_cpu} |
| ;; |
| "" | "m68k") |
| with_cpu=m${default_m68k_cpu} |
| ;; |
| esac |
| ;; |
| sparc*-*-*) |
| case ${target} in |
| *-leon-*) |
| with_cpu=leon |
| ;; |
| *-leon[3-9]*) |
| with_cpu=leon3 |
| ;; |
| *-leon[3-9]v7*) |
| with_cpu=leon3v7 |
| ;; |
| *) |
| with_cpu="`echo ${target} | sed 's/-.*$//'`" |
| ;; |
| esac |
| ;; |
| visium-*-*) |
| with_cpu=gr5 |
| ;; |
| esac |
| |
| # Avoid overriding --with-cpu-32 and --with-cpu-64 values. |
| case ${target} in |
| i[34567]86-*-*|x86_64-*-*) |
| if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then |
| if test x$with_cpu_32 = x; then |
| with_cpu_32=$with_cpu |
| fi |
| if test x$with_cpu_64 = x; then |
| with_cpu_64=$with_cpu |
| fi |
| with_cpu= |
| fi |
| ;; |
| esac |
| fi |
| |
| # Support for --with-arch and related options (and a few unrelated options, |
| # too). |
| case ${with_arch} in |
| yes | no) |
| echo "--with-arch must be passed a value" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| # If there is no $with_arch option, try to infer one from ${target}. |
| # This block sets nothing except for with_arch. |
| if test x$with_arch = x ; then |
| case ${target} in |
| i[34567]86-*-darwin*|x86_64-*-darwin*) |
| # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT |
| # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h. |
| ;; |
| i[34567]86-*-elfiamcu) |
| with_arch=lakemont |
| ;; |
| i[34567]86-*-*) |
| # --with-fpmath sets the default ISA to SSE2, which is the same |
| # ISA supported by Pentium 4. |
| if test x$with_fpmath = x || test $arch_without_sse2 = no; then |
| with_arch=$arch |
| else |
| with_arch=pentium4 |
| fi |
| ;; |
| x86_64-*-*) |
| with_arch=$arch |
| ;; |
| mips64r5900-*-* | mips64r5900el-*-* | mipsr5900-*-* | mipsr5900el-*-*) |
| with_arch=r5900 |
| ;; |
| mips*-*-vxworks) |
| with_arch=mips2 |
| ;; |
| esac |
| |
| # Avoid overriding --with-arch-32 and --with-arch-64 values. |
| case ${target} in |
| i[34567]86-*-darwin*|x86_64-*-darwin*) |
| # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT |
| # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h. |
| ;; |
| i[34567]86-*-*|x86_64-*-*) |
| if test x$with_arch_32 != x || test x$with_arch_64 != x; then |
| if test x$with_arch_32 = x; then |
| with_arch_32=$with_arch |
| fi |
| if test x$with_arch_64 = x; then |
| if test $arch_without_64bit = yes; then |
| # Set the default 64bit arch to x86-64 if the default arch |
| # doesn't support 64bit. |
| with_arch_64=x86-64 |
| else |
| with_arch_64=$with_arch |
| fi |
| fi |
| with_arch= |
| elif test $arch_without_64bit$need_64bit_isa = yesyes; then |
| # Set the default 64bit arch to x86-64 if the default arch |
| # doesn't support 64bit and we need 64bit ISA. |
| with_arch_32=$with_arch |
| with_arch_64=x86-64 |
| with_arch= |
| fi |
| ;; |
| esac |
| fi |
| |
| # Infer a default setting for --with-float. |
| if test x$with_float = x; then |
| case ${target} in |
| mips64r5900-*-* | mips64r5900el-*-* | mipsr5900-*-* | mipsr5900el-*-*) |
| # The R5900 doesn't support 64-bit float. 32-bit float doesn't |
| # comply with IEEE 754. |
| with_float=soft |
| ;; |
| esac |
| fi |
| |
| # Infer a default setting for --with-fpu. |
| if test x$with_fpu = x; then |
| case ${target} in |
| mips64r5900-*-* | mips64r5900el-*-* | mipsr5900-*-* | mipsr5900el-*-*) |
| # The R5900 FPU only supports single precision. |
| with_fpu=single |
| ;; |
| esac |
| fi |
| |
| # Support --with-fpmath. |
| if test x$with_fpmath != x; then |
| case ${target} in |
| i[34567]86-*-* | x86_64-*-*) |
| case ${with_fpmath} in |
| avx) |
| tm_file="${tm_file} i386/avxmath.h" |
| ;; |
| sse) |
| tm_file="${tm_file} i386/ssemath.h" |
| ;; |
| *) |
| echo "Invalid --with-fpmath=$with_fpmath" 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| *) |
| echo "--with-fpmath isn't supported for $target." 1>&2 |
| exit 1 |
| ;; |
| esac |
| fi |
| |
| # Similarly for --with-schedule. |
| if test x$with_schedule = x; then |
| case ${target} in |
| hppa1*) |
| # Override default PA8000 scheduling model. |
| with_schedule=7100LC |
| ;; |
| esac |
| fi |
| |
| # Infer a default setting for --with-llsc. |
| if test x$with_llsc = x; then |
| case ${target} in |
| mips*-*-linux*) |
| # The kernel emulates LL and SC where necessary. |
| with_llsc=yes |
| ;; |
| mips64r5900-*-* | mips64r5900el-*-* | mipsr5900-*-* | mipsr5900el-*-*) |
| # The R5900 doesn't support LL(D) and SC(D). |
| with_llsc=no |
| ;; |
| esac |
| fi |
| |
| # Validate and mark as valid any --with options supported |
| # by this target. In order to use a particular --with option |
| # you must list it in supported_defaults; validating the value |
| # is optional. This case statement should set nothing besides |
| # supported_defaults. |
| |
| supported_defaults= |
| case "${target}" in |
| aarch64*-*-*) |
| supported_defaults="abi cpu cpu_64 arch arch_64 tune tune_64" |
| if test x$with_cpu_64 != x && test x$with_cpu = x; then |
| with_cpu=$with_cpu_64 |
| fi |
| if test x$with_arch_64 != x && test x$with_arch = x; then |
| with_arch=$with_arch_64 |
| fi |
| if test x$with_tune_64 != x && test x$with_tune = x; then |
| with_tune=$with_tune_64 |
| fi |
| for which in cpu arch tune; do |
| eval "val=\$with_$which" |
| base_val=`echo $val | sed -e 's/\+.*//'` |
| ext_val=`echo $val | sed -e 's/[a-z0-9.-]\+//'` |
| |
| if [ $which = arch ]; then |
| def=aarch64-arches.def |
| pattern=AARCH64_ARCH |
| else |
| def=aarch64-cores.def |
| pattern=AARCH64_CORE |
| fi |
| |
| # Find the base CPU or ARCH id in aarch64-cores.def or |
| # aarch64-arches.def |
| if [ x"$base_val" = x ] \ |
| || grep "^$pattern(\"$base_val\"," \ |
| ${srcdir}/config/aarch64/$def \ |
| > /dev/null; then |
| |
| # Disallow extensions in --with-tune=cortex-a53+crc. |
| if [ $which = tune ] && [ x"$ext_val" != x ]; then |
| echo "Architecture extensions not supported in --with-$which=$val" 1>&2 |
| exit 1 |
| fi |
| |
| # Use the pre-processor to strip flatten the options. |
| # This makes the format less rigid than if we use |
| # grep and sed directly here. |
| opt_macro="AARCH64_OPT_EXTENSION(A, B, C, D, E, F)=A, B, C, D, E, F" |
| options_parsed="`$ac_cv_prog_CPP -D"$opt_macro" -x c \ |
| ${srcdir}/config/aarch64/aarch64-option-extensions.def`" |
| |
| # Match one element inside AARCH64_OPT_EXTENSION, we |
| # consume anything that's not a ,. |
| elem="[ ]*\([^,]\+\)[ ]*" |
| |
| # Repeat the pattern for the number of entries in the |
| # AARCH64_OPT_EXTENSION, currently 6 times. |
| sed_patt="^$elem,$elem,$elem,$elem,$elem,$elem" |
| |
| while [ x"$ext_val" != x ] |
| do |
| ext_val=`echo $ext_val | sed -e 's/\+//'` |
| ext=`echo $ext_val | sed -e 's/\+.*//'` |
| base_ext=`echo $ext | sed -e 's/^no//'` |
| opt_line=`echo -e "$options_parsed" | \ |
| grep "^\"$base_ext\""` |
| |
| if [ x"$base_ext" = x ] \ |
| || [ x"$opt_line" != x ]; then |
| true |
| else |
| echo "Unknown extension used in --with-$which=$val" 1>&2 |
| exit 1 |
| fi |
| ext_val=`echo $ext_val | sed -e 's/[a-z0-9]\+//'` |
| done |
| |
| true |
| else |
| # Allow --with-$which=native. |
| if [ "$val" = native ]; then |
| true |
| else |
| echo "Unknown $which used in --with-$which=$val" 1>&2 |
| exit 1 |
| fi |
| fi |
| done |
| ;; |
| |
| alpha*-*-*) |
| supported_defaults="cpu tune" |
| for which in cpu tune; do |
| eval "val=\$with_$which" |
| case "$val" in |
| "" \ |
| | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \ |
| | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \ |
| | 21264a) |
| ;; |
| *) |
| echo "Unknown CPU used in --with-$which=$val" 1>&2 |
| exit 1 |
| ;; |
| esac |
| done |
| ;; |
| |
| arc*-*-*) |
| supported_defaults="cpu fpu" |
| |
| new_cpu=hs38_linux |
| if [ x"$with_cpu" = x ] \ |
| || grep -q -E "^ARC_CPU[[:blank:]]*\($with_cpu," \ |
| ${srcdir}/config/arc/arc-cpus.def |
| then |
| # Ok |
| new_cpu=$with_cpu |
| else |
| echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2 |
| exit 1 |
| fi |
| |
| # see if --with-fpu matches any of the supported FPUs |
| case "$with_fpu" in |
| "") |
| # OK |
| ;; |
| fpus | fpus_div | fpus_fma | fpus_all) |
| # OK if em or hs |
| flags_ok="[emhs]+" |
| ;; |
| fpuda | fpuda_div | fpuda_fma | fpuda_all) |
| # OK only em |
| flags_ok="em" |
| ;; |
| fpud | fpud_div | fpud_fma | fpud_all) |
| # OK only hs |
| flags_ok="hs" |
| ;; |
| *) |
| echo "Unknown floating point type used in "\ |
| "--with-fpu=$with_fpu" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| if [ -n "$flags_ok" ] \ |
| && ! grep -q -E "^ARC_CPU[[:blank:]]*\($new_cpu,[[:blank:]]*$flags_ok," \ |
| ${srcdir}/config/arc/arc-cpus.def |
| then |
| echo "Unknown floating point type used in "\ |
| "--with-fpu=$with_fpu for cpu $new_cpu" 1>&2 |
| exit 1 |
| fi |
| ;; |
| |
| avr-*-*) |
| # Handle --with-multilib-list. |
| if test "x${with_multilib_list}" != xdefault; then |
| TM_MULTILIB_CONFIG="${with_multilib_list}" |
| fi |
| ;; |
| |
| csky-*-*) |
| supported_defaults="cpu endian float" |
| ;; |
| |
| arm*-*-*) |
| supported_defaults="arch cpu float tune fpu abi mode tls" |
| for which in cpu tune arch; do |
| # See if it matches a supported value |
| eval "val=\$with_$which" |
| if [ x"$val" != x ]; then |
| cpu=`awk -f ${srcdir}/config/arm/parsecpu.awk \ |
| -v cmd="chk$which $val" \ |
| ${srcdir}/config/arm/arm-cpus.in` |
| if [ "$cpu" = "error" ]; then |
| echo "Unknown target in --with-$which=$val" 1>&2 |
| exit 1 |
| else |
| new_val=$cpu |
| eval "target_${which}_cname=$new_val" |
| echo "For $val real value is $new_val" |
| fi |
| fi |
| done |
| |
| case "$with_float" in |
| "" \ |
| | soft | hard | softfp) |
| # OK |
| ;; |
| *) |
| echo "Unknown floating point type used in --with-float=$with_float" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| # see if --with-fpu matches any of the supported FPUs |
| if [ x"$with_fpu" != x ] ; then |
| val=$with_fpu |
| fpu=`awk -f ${srcdir}/config/arm/parsecpu.awk \ |
| -v cmd="chkfpu $val" \ |
| ${srcdir}/config/arm/arm-cpus.in` |
| if [ "$fpu" = "error" ] |
| then |
| echo "Unknown target in --with-fpu=$val" 1>&2 |
| exit 1 |
| fi |
| fi |
| |
| case "$with_abi" in |
| "" \ |
| | apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux ) |
| #OK |
| ;; |
| *) |
| echo "Unknown ABI used in --with-abi=$with_abi" |
| exit 1 |
| ;; |
| esac |
| |
| case "$with_mode" in |
| "" \ |
| | arm | thumb ) |
| #OK |
| ;; |
| *) |
| echo "Unknown mode used in --with-mode=$with_mode" |
| exit 1 |
| ;; |
| esac |
| |
| case "$with_tls" in |
| "" \ |
| | gnu | gnu2) |
| # OK |
| ;; |
| *) |
| echo "Unknown TLS method used in --with-tls=$with_tls" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| if test "x$with_arch" != x && test "x$with_cpu" != x; then |
| echo "Switch \"--with-arch\" may not be used with switch \"--with-cpu\"" 1>&2 |
| exit 1 |
| fi |
| |
| if test "x$with_cpu" != x && test "x$with_tune" != x; then |
| echo "Switch \"--with-tune\" may not be used with switch \"--with-cpu\"" 1>&2 |
| exit 1 |
| fi |
| |
| # Add extra multilibs |
| if test "x$with_multilib_list" != x; then |
| ml= |
| arm_multilibs=`echo $with_multilib_list | sed -e 's/,/ /g'` |
| if test "x${arm_multilibs}" != xdefault ; then |
| for arm_multilib in ${arm_multilibs}; do |
| case ${arm_multilib} in |
| aprofile|rmprofile) |
| tmake_profile_file="arm/t-multilib" |
| ;; |
| @*) |
| ml=`echo "X$arm_multilib" | sed '1s,^X@,,'` |
| if test -f "${srcdir}/config/arm/${ml}"; then |
| tmake_file="${tmake_file} arm/${ml}" |
| else |
| echo "Error: ${ml} does not exist in ${srcdir}/config/arm" >&2 |
| exit 1 |
| fi |
| ;; |
| *) |
| echo "Error: --with-multilib-list=${with_multilib_list} not supported." 1>&2 |
| exit 1 |
| ;; |
| esac |
| done |
| fi |
| |
| if test "x${tmake_profile_file}" != x ; then |
| # arm/t-aprofile and arm/t-rmprofile are only |
| # designed to work without any with-cpu, |
| # with-arch, with-mode, with-fpu or with-float |
| # options. |
| if test "x$with_arch" != x \ |
| || test "x$with_cpu" != x \ |
| || test "x$with_float" != x \ |
| || test "x$with_fpu" != x \ |
| || test "x$with_mode" != x ; then |
| echo "Error: You cannot use any of --with-arch/cpu/fpu/float/mode with --with-multilib-list=${with_multilib_list}" 1>&2 |
| exit 1 |
| elif test "x$ml" != x ; then |
| echo "Error: You cannot use builtin multilib profiles along with custom ones" 1>&2 |
| exit 1 |
| fi |
| # But pass the default value for float-abi |
| # through to the multilib selector |
| with_float="soft" |
| tmake_file="${tmake_file} ${tmake_profile_file}" |
| TM_MULTILIB_CONFIG="$with_multilib_list" |
| fi |
| fi |
| target_cpu_cname=${target_cpu_cname:-arm7tdmi} |
| with_cpu=${with_cpu:-$target_cpu_cname} |
| ;; |
| |
| fr*-*-*linux*) |
| supported_defaults=cpu |
| case "$with_cpu" in |
| fr400) ;; |
| fr550) ;; |
| *) |
| echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| |
| fido-*-* | m68k*-*-*) |
| supported_defaults="arch cpu" |
| case "$with_arch" in |
| "" | "m68k"| "cf") |
| m68k_arch_family="$with_arch" |
| ;; |
| *) |
| echo "Invalid --with-arch=$with_arch" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| # We always have a $with_cpu setting here. |
| case "$with_cpu" in |
| "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060") |
| m68k_cpu_ident=$with_cpu |
| ;; |
| "m68020-40") |
| m68k_cpu_ident=m68020 |
| tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40" |
| ;; |
| "m68020-60") |
| m68k_cpu_ident=m68020 |
| tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60" |
| ;; |
| *) |
| # We need the C identifier rather than the string. |
| m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \ |
| 'BEGIN { FS="[ \t]*[,()][ \t]*" }; \ |
| $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \ |
| ${srcdir}/config/m68k/m68k-devices.def` |
| if [ x"$m68k_cpu_ident" = x ] ; then |
| echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2 |
| exit 1 |
| fi |
| with_cpu="mcpu=$with_cpu" |
| ;; |
| esac |
| ;; |
| |
| amdgcn-*-*) |
| supported_defaults="arch tune" |
| |
| for which in arch tune; do |
| eval "val=\$with_$which" |
| case ${val} in |
| "" | fiji | gfx900 | gfx906 | gfx908 | gfx90a) |
| # OK |
| ;; |
| *) |
| echo "Unknown cpu used in --with-$which=$val." 1>&2 |
| exit 1 |
| ;; |
| esac |
| done |
| [ "x$with_arch" = x ] && with_arch=fiji |
| ;; |
| |
| hppa*-*-*) |
| supported_defaults="arch schedule" |
| |
| case "$with_arch" in |
| "" | 1.0 | 1.1 | 2.0) |
| # OK |
| ;; |
| *) |
| echo "Unknown architecture used in --with-arch=$with_arch" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case "$with_schedule" in |
| "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000) |
| # OK |
| ;; |
| *) |
| echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| |
| i[34567]86-*-* | x86_64-*-*) |
| supported_defaults="abi arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64" |
| for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do |
| eval "val=\$with_$which" |
| case " $x86_archs " in |
| *" ${val} "*) |
| case "${target}" in |
| x86_64-*-*) |
| case "x$which" in |
| *_32) |
| ;; |
| *) |
| echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| esac |
| # OK |
| ;; |
| *) |
| if test x${val} != x; then |
| case " $x86_64_archs " in |
| *" ${val} "*) |
| # Disallow x86-64-v* for --with-cpu=/--with-tune= |
| case "x$which$val" in |
| xcpu*x86-64-v*|xtune*x86-64-v*) |
| echo "Unknown CPU given in --with-$which=$val." 1>&2 |
| exit 1 |
| ;; |
| *) |
| ;; |
| esac |
| # OK |
| ;; |
| *) |
| # Allow $x86_cpus --with-cpu=/--with-tune= |
| case "x$which" in |
| xcpu*|xtune*) |
| case " $x86_cpus " in |
| *" ${val} "*) |
| # OK |
| ;; |
| *) |
| echo "Unknown CPU given in --with-$which=$val." 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| *) |
| echo "Unknown CPU given in --with-$which=$val." 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| esac |
| fi |
| ;; |
| esac |
| done |
| ;; |
| |
| riscv*-*-*) |
| supported_defaults="abi arch tune riscv_attribute isa_spec" |
| |
| case "${target}" in |
| riscv-* | riscv32*) xlen=32 ;; |
| riscv64*) xlen=64 ;; |
| *) echo "Unsupported RISC-V target ${target}" 1>&2; exit 1 ;; |
| esac |
| |
| case "${with_isa_spec}" in |
| ""|default|20191213|201912) |
| tm_defines="${tm_defines} TARGET_DEFAULT_ISA_SPEC=ISA_SPEC_CLASS_20191213" |
| with_isa_spec=20191213 |
| ;; |
| 2.2) |
| tm_defines="${tm_defines} TARGET_DEFAULT_ISA_SPEC=ISA_SPEC_CLASS_2P2" |
| ;; |
| 20190608 | 201906) |
| tm_defines="${tm_defines} TARGET_DEFAULT_ISA_SPEC=ISA_SPEC_CLASS_20190608" |
| with_isa_spec=20190608 |
| ;; |
| *) |
| echo "--with-isa-spec only accept 2.2, 20191213, 201912, 20190608 or 201906" 1>&2 |
| exit 1 |
| esac |
| |
| case "${with_riscv_attribute}" in |
| yes) |
| tm_defines="${tm_defines} TARGET_RISCV_ATTRIBUTE=1" |
| ;; |
| no) |
| tm_defines="${tm_defines} TARGET_RISCV_ATTRIBUTE=0" |
| ;; |
| ""|default) |
| tm_defines="${tm_defines} TARGET_RISCV_ATTRIBUTE=1" |
| ;; |
| *) |
| echo "--with-riscv-attribute=${with_riscv_attribute} is not supported. The argument must begin with yes, no or default." 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| |
| # Infer arch from --with-arch, --target, and --with-abi. |
| case "${with_arch}" in |
| rv32e* | rv32i* | rv32g* | rv64i* | rv64g*) |
| # OK. |
| ;; |
| "") |
| # Infer XLEN, but otherwise assume GC. |
| case "${with_abi}" in |
| ilp32e) with_arch="rv32e" ;; |
| ilp32 | ilp32f | ilp32d) with_arch="rv32gc" ;; |
| lp64 | lp64f | lp64d) with_arch="rv64gc" ;; |
| *) with_arch="rv${xlen}gc" ;; |
| esac |
| ;; |
| *) |
| echo "--with-arch=${with_arch} is not supported. The argument must begin with rv32e, rv32i, rv32g, rv64i, or rv64g." 1>&2 |
| exit 1 |
| ;; |
| esac |
| PYTHON=`which python || which python3 || which python2` |
| if test "x${PYTHON}" != x; then |
| with_arch=`${PYTHON} ${srcdir}/config/riscv/arch-canonicalize -misa-spec=${with_isa_spec} ${with_arch}` |
| fi |
| tm_defines="${tm_defines} TARGET_RISCV_DEFAULT_ARCH=${with_arch}" |
| |
| # Make sure --with-abi is valid. If it was not specified, |
| # pick a default based on the ISA, preferring soft-float |
| # unless the D extension is present. |
| case "${with_abi}" in |
| ilp32 | ilp32e | ilp32f | ilp32d | lp64 | lp64f | lp64d) |
| ;; |
| "") |
| case "${with_arch}" in |
| rv32*d* | rv32g*) with_abi=ilp32d ;; |
| rv32e*) with_abi=ilp32e ;; |
| rv32*) with_abi=ilp32 ;; |
| rv64*d* | rv64g*) with_abi=lp64d ;; |
| rv64*) with_abi=lp64 ;; |
| esac |
| ;; |
| *) |
| echo "--with-abi=${with_abi} is not supported" 1>&2 |
| exit 1 |
| ;; |
| esac |
| tm_defines="${tm_defines} TARGET_RISCV_DEFAULT_ABI=${with_abi}" |
| |
| # Make sure ABI and ISA are compatible. |
| case "${with_abi},${with_arch}" in |
| ilp32,rv32* | ilp32e,rv32e* \ |
| | ilp32f,rv32*f* | ilp32f,rv32g* \ |
| | ilp32d,rv32*d* | ilp32d,rv32g* \ |
| | lp64,rv64* \ |
| | lp64f,rv64*f* | lp64f,rv64g* \ |
| | lp64d,rv64*d* | lp64d,rv64g*) |
| ;; |
| *) |
| echo "--with-abi=${with_abi} is not supported for ISA ${with_arch}" 1>&2 |
| exit 1 |
| ;; |
| esac |
| # Handle --with-multilib-generator. |
| if test "x${with_multilib_generator}" != xdefault; then |
| if test "x${with_multilib_list}" != xdefault; then |
| echo "--with-multilib-list= can't used with --with-multilib-generator= at same time" 1>&2 |
| exit 1 |
| fi |
| case "${target}" in |
| riscv*-*-elf*) |
| if ${srcdir}/config/riscv/multilib-generator \ |
| -misa-spec=${with_isa_spec} \ |
| `echo ${with_multilib_generator} | sed 's/;/ /g'`\ |
| > t-multilib-config; |
| then |
| tmake_file="${tmake_file} riscv/t-withmultilib-generator" |
| else |
| echo "invalid option for --with-multilib-generator" 1>&2 |
| exit 1 |
| fi |
| ;; |
| *) |
| echo "--with-multilib-generator= is not supported for ${target}, only supported for riscv*-*-elf*" 1>&2 |
| exit 1 |
| ;; |
| esac |
| fi |
| |
| # Handle --with-multilib-list. |
| if test "x${with_multilib_list}" != xdefault; then |
| tmake_file="${tmake_file} riscv/t-withmultilib" |
| |
| case ${with_multilib_list} in |
| ilp32 | ilp32f | ilp32d \ |
| | lp64 | lp64f | lp64d ) |
| TM_MULTILIB_CONFIG="${with_arch},${with_multilib_list}" |
| ;; |
| *) |
| echo "--with-multilib-list=${with_multilib_list} not supported." |
| exit 1 |
| esac |
| fi |
| ;; |
| |
| mips*-*-*) |
| supported_defaults="abi arch arch_32 arch_64 float fpu nan fp_32 odd_spreg_32 tune tune_32 tune_64 divide llsc mips-plt synci lxc1-sxc1 madd4" |
| |
| case ${with_float} in |
| "" | soft | hard) |
| # OK |
| ;; |
| *) |
| echo "Unknown floating point type used in --with-float=$with_float" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${with_fpu} in |
| "" | single | double) |
| # OK |
| ;; |
| *) |
| echo "Unknown fpu type used in --with-fpu=$with_fpu" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${with_nan} in |
| "" | 2008 | legacy) |
| # OK |
| ;; |
| *) |
| echo "Unknown NaN encoding used in --with-nan=$with_nan" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${with_fp_32} in |
| "" | 32 | xx | 64) |
| # OK |
| ;; |
| *) |
| echo "Unknown FP mode used in --with-fp-32=$with_fp_32" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${with_odd_spreg_32} in |
| yes) |
| with_odd_spreg_32="odd-spreg" |
| ;; |
| no) |
| with_odd_spreg_32="no-odd-spreg" |
| ;; |
| "") |
| # OK |
| ;; |
| *) |
| echo "Unknown odd-spreg-32 type used in --with-odd-spreg-32=$with_odd_spreg_32" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${with_abi} in |
| "" | 32 | o64 | n32 | 64 | eabi) |
| # OK |
| ;; |
| *) |
| echo "Unknown ABI used in --with-abi=$with_abi" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${with_divide} in |
| "" | breaks | traps) |
| # OK |
| ;; |
| *) |
| echo "Unknown division check type use in --with-divide=$with_divide" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${with_llsc} in |
| yes) |
| with_llsc=llsc |
| ;; |
| no) |
| with_llsc="no-llsc" |
| ;; |
| "") |
| # OK |
| ;; |
| *) |
| echo "Unknown llsc type used in --with-llsc" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${with_mips_plt} in |
| yes) |
| with_mips_plt=plt |
| ;; |
| no) |
| with_mips_plt=no-plt |
| ;; |
| "") |
| ;; |
| *) |
| echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${with_synci} in |
| yes) |
| with_synci=synci |
| ;; |
| no) |
| with_synci=no-synci |
| ;; |
| "") |
| ;; |
| *) |
| echo "Unknown synci type used in --with-synci" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${with_lxc1_sxc1} in |
| yes) |
| with_lxc1_sxc1=lxc1-sxc1 |
| ;; |
| no) |
| with_lxc1_sxc1=no-lxc1-sxc1 |
| ;; |
| "") |
| ;; |
| *) |
| echo "Unknown lxc1-sxc1 type used in --with-lxc1-sxc1" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${with_madd4} in |
| yes) |
| with_madd4=madd4 |
| ;; |
| no) |
| with_madd4=no-madd4 |
| ;; |
| "") |
| ;; |
| *) |
| echo "Unknown madd4 type used in --with-madd4" 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| |
| loongarch*-*-*) |
| supported_defaults="abi arch tune fpu" |
| |
| # Local variables |
| unset \ |
| abi_pattern abi_default \ |
| abiext_pattern abiext_default \ |
| arch_pattern arch_default \ |
| fpu_pattern fpu_default \ |
| tune_pattern tune_default \ |
| triplet_os triplet_abi |
| |
| # Infer ABI from the triplet. |
| case ${target} in |
| loongarch64-*-*-*f64) |
| abi_pattern="lp64d" |
| triplet_abi="f64" |
| ;; |
| loongarch64-*-*-*f32) |
| abi_pattern="lp64f" |
| triplet_abi="f32" |
| ;; |
| loongarch64-*-*-*sf) |
| abi_pattern="lp64s" |
| triplet_abi="sf" |
| ;; |
| loongarch64-*-*-*) |
| abi_pattern="lp64[dfs]" |
| abi_default="lp64d" |
| triplet_abi="" |
| ;; |
| *) |
| echo "Unsupported target ${target}." 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| abiext_pattern="*" |
| abiext_default="base" |
| |
| # Get the canonical triplet (multiarch specifier). |
| case ${target} in |
| *-linux-gnu*) triplet_os="linux-gnu";; |
| *-linux-musl*) triplet_os="linux-musl";; |
| *) |
| echo "Unsupported target ${target}." 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| la_canonical_triplet="loongarch64-${triplet_os}${triplet_abi}" |
| |
| |
| # Perform initial sanity checks on --with-* options. |
| case ${with_arch} in |
| "" | loongarch64 | la464) ;; # OK, append here. |
| native) |
| if test x${host} != x${target}; then |
| echo "--with-arch=native is illegal for cross-compiler." 1>&2 |
| exit 1 |
| fi |
| ;; |
| "") |
| echo "Please set a default value for \${with_arch}" \ |
| "according to your target triplet \"${target}\"." 1>&2 |
| exit 1 |
| ;; |
| *) |
| echo "Unknown arch in --with-arch=$with_arch" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${with_abi} in |
| "" | lp64d | lp64f | lp64s) ;; # OK, append here. |
| *) |
| echo "Unsupported ABI given in --with-abi=$with_abi" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${with_abiext} in |
| "" | base) ;; # OK, append here. |
| *) |
| echo "Unsupported ABI extention type $with_abiext" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${with_fpu} in |
| "" | none | 32 | 64) ;; # OK, append here. |
| 0) |
| # Convert "0" to "none" for upcoming checks. |
| with_fpu="none" |
| ;; |
| *) |
| echo "Unknown fpu type in --with-fpu=$with_fpu" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| |
| # Set default value for with_abi. |
| case ${with_abi} in |
| "") |
| if test x${abi_default} != x; then |
| with_abi=${abi_default} |
| else |
| with_abi=${abi_pattern} |
| fi |
| ;; |
| |
| *) |
| if echo "${with_abi}" | grep -E "^${abi_pattern}$" > /dev/null; then |
| : # OK |
| else |
| echo "Incompatible options:" \ |
| "--with-abi=${with_abi} and --target=${target}." 1>&2 |
| exit 1 |
| fi |
| ;; |
| esac |
| |
| # Set default value for with_abiext (internal) |
| case ${with_abiext} in |
| "") |
| if test x${abiext_default} != x; then |
| with_abiext=${abiext_default} |
| else |
| with_abiext=${abiext_pattern} |
| fi |
| ;; |
| |
| *) |
| if echo "${with_abiext}" | grep -E "^${abiext_pattern}$" > /dev/null; then |
| : # OK |
| else |
| echo "The ABI extension type \"${with_abiext}\"" \ |
| "is incompatible with --target=${target}." 1>&2 |
| exit 1 |
| fi |
| |
| ;; |
| esac |
| |
| # Infer ISA-related default options from the ABI: pass 1 |
| case ${with_abi}/${with_abiext} in |
| lp64*/base) |
| # architectures that support lp64* ABI |
| arch_pattern="native|loongarch64|la464" |
| # default architecture for lp64* ABI |
| arch_default="loongarch64" |
| ;; |
| *) |
| echo "Unsupported ABI type ${with_abi}/${with_abiext}." 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| # Infer ISA-related default options from the ABI: pass 2 |
| case ${with_abi}/${with_abiext} in |
| lp64d/base) |
| fpu_pattern="64" |
| ;; |
| lp64f/base) |
| fpu_pattern="32|64" |
| fpu_default="32" |
| ;; |
| lp64s/base) |
| fpu_pattern="none|32|64" |
| fpu_default="none" |
| ;; |
| *) |
| echo "Unsupported ABI type ${with_abi}/${with_abiext}." 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| ## Set default value for with_arch. |
| case ${with_arch} in |
| "") |
| if test x${arch_default} != x; then |
| with_arch=${arch_default} |
| else |
| with_arch=${arch_pattern} |
| fi |
| ;; |
| |
| *) |
| if echo "${with_arch}" | grep -E "^${arch_pattern}$" > /dev/null; then |
| : # OK |
| else |
| echo "${with_abi}/${with_abiext} ABI cannot be implemented with" \ |
| "--with-arch=${with_arch}." 1>&2 |
| exit 1 |
| fi |
| ;; |
| esac |
| |
| ## Set default value for with_fpu. |
| case ${with_fpu} in |
| "") |
| if test x${fpu_default} != x; then |
| with_fpu=${fpu_default} |
| else |
| with_fpu=${fpu_pattern} |
| fi |
| ;; |
| |
| *) |
| if echo "${with_fpu}" | grep -E "^${fpu_pattern}$" > /dev/null; then |
| : # OK |
| else |
| echo "${with_abi}/${with_abiext} ABI cannot be implemented with" \ |
| "--with-fpu=${with_fpu}." 1>&2 |
| exit 1 |
| fi |
| ;; |
| esac |
| |
| |
| # Infer default with_tune from with_arch: pass 1 |
| case ${with_arch} in |
| native) |
| tune_pattern="*" |
| tune_default="native" |
| ;; |
| loongarch64) |
| tune_pattern="loongarch64|la464" |
| tune_default="la464" |
| ;; |
| *) |
| # By default, $with_tune == $with_arch |
| tune_pattern="$with_arch" |
| ;; |
| esac |
| |
| ## Set default value for with_tune. |
| case ${with_tune} in |
| "") |
| if test x${tune_default} != x; then |
| with_tune=${tune_default} |
| else |
| with_tune=${tune_pattern} |
| fi |
| ;; |
| |
| *) |
| if echo "${with_tune}" | grep -E "^${tune_pattern}$" > /dev/null; then |
| : # OK |
| else |
| echo "Incompatible options: --with-tune=${with_tune}" \ |
| "and --with-arch=${with_arch}." 1>&2 |
| exit 1 |
| fi |
| ;; |
| esac |
| |
| # Handle --with-multilib-list. |
| if test x"${with_multilib_list}" = x \ |
| || test x"${with_multilib_list}" = xno \ |
| || test x"${with_multilib_list}" = xdefault \ |
| || test x"${enable_multilib}" != xyes; then |
| |
| with_multilib_list="${with_abi}/${with_abiext}" |
| fi |
| |
| # Check if the configured default ABI combination is included in |
| # ${with_multilib_list}. |
| loongarch_multilib_list_sane=no |
| |
| # This one goes to TM_MULTILIB_CONFIG, for use in t-linux. |
| loongarch_multilib_list_make="" |
| |
| # This one goes to tm_defines, for use in loongarch-driver.c. |
| loongarch_multilib_list_c="" |
| |
| # ${with_multilib_list} should not contain whitespaces, |
| # consecutive commas or slashes. |
| if echo "${with_multilib_list}" \ |
| | grep -E -e "[[:space:]]" -e '[,/][,/]' -e '[,/]$' -e '^[,/]' > /dev/null; then |
| echo "Invalid argument to --with-multilib-list." 1>&2 |
| exit 1 |
| fi |
| |
| unset component idx elem_abi_base elem_abi_ext elem_tmp |
| for elem in $(echo "${with_multilib_list}" | tr ',' ' '); do |
| idx=0 |
| while true; do |
| idx=$((idx + 1)) |
| component=$(echo "${elem}" | awk -F'/' '{print $'"${idx}"'}') |
| |
| case ${idx} in |
| 1) |
| # Component 1: Base ABI type |
| case ${component} in |
| lp64d) elem_tmp="ABI_BASE_LP64D,";; |
| lp64f) elem_tmp="ABI_BASE_LP64F,";; |
| lp64s) elem_tmp="ABI_BASE_LP64S,";; |
| *) |
| echo "Unknown base ABI \"${component}\" in --with-multilib-list." 1>&2 |
| exit 1 |
| ;; |
| esac |
| loongarch_multilib_list_c="${loongarch_multilib_list_c}${elem_tmp}" |
| loongarch_multilib_list_make="${loongarch_multilib_list_make}mabi=${component}" |
| elem_abi_base="${component}" |
| ;; |
| |
| 2) |
| # Component 2: ABI extension type |
| case ${component} in |
| "" | base) |
| component="base" |
| elem_tmp="ABI_EXT_BASE," |
| ;; |
| *) |
| echo "Unknown ABI extension \"${component}\" in --with-multilib-list." 1>&2 |
| exit 1 |
| ;; |
| esac |
| loongarch_multilib_list_c="${loongarch_multilib_list_c}${elem_tmp}" |
| loongarch_multilib_list_make="${loongarch_multilib_list_make}" # Add nothing for now. |
| elem_abi_ext="${component}" |
| ;; |
| |
| *) |
| # Component 3 and on: optional stuff |
| case ${component} in |
| "") |
| # End of component list. |
| break |
| ;; |
| *) |
| echo "Unknown ABI \"${elem}\" in --with-multilib-list." 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| esac |
| done |
| |
| if test x${elem_abi_base} = x${with_abi} \ |
| && test x${elem_abi_ext} = x${with_abiext}; then |
| loongarch_multilib_list_sane=yes |
| fi |
| loongarch_multilib_list_make="${loongarch_multilib_list_make}," |
| done |
| |
| # Check if the default ABI combination is in the default list. |
| if test x${loongarch_multilib_list_sane} = xno; then |
| if test x${with_abiext} = xbase; then |
| with_abiext="" |
| else |
| with_abiext="/${with_abiext}" |
| fi |
| |
| echo "Default ABI combination (${with_abi}${with_abiext})" \ |
| "not found in --with-multilib-list." 1>&2 |
| exit 1 |
| fi |
| |
| # Remove the excessive appending comma. |
| loongarch_multilib_list_c=${loongarch_multilib_list_c%,} |
| loongarch_multilib_list_make=${loongarch_multilib_list_make%,} |
| ;; |
| |
| nds32*-*-*) |
| supported_defaults="arch cpu nds32_lib float fpu_config" |
| |
| # process --with-arch |
| case "${with_arch}" in |
| "" | v3 ) |
| tm_defines="${tm_defines} TARGET_ARCH_DEFAULT=0" |
| ;; |
| v2 | v2j | v3m) |
| # OK |
| tm_defines="${tm_defines} TARGET_ARCH_DEFAULT=0" |
| ;; |
| v3f) |
| tm_defines="${tm_defines} TARGET_ARCH_DEFAULT=1" |
| ;; |
| v3s) |
| tm_defines="${tm_defines} TARGET_ARCH_DEFAULT=2" |
| |
| ;; |
| *) |
| echo "Cannot accept --with-arch=$with_arch, available values are: v2 v2j v3 v3m v3f v3s" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case "${with_cpu}" in |
| "") |
| with_cpu=n9 |
| ;; |
| n6 | n7 |n8 | e8 | s8 | n9 | n10 | d10 | n12 | n13 | n15) |
| # OK |
| ;; |
| *) |
| echo "Cannot accept --with-cpu=$with_cpu, available values are: n6 n7 n8 e8 s8 n9 n10 d10 n12 n13 n15" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| # process --with-nds32-lib |
| case "${with_nds32_lib}" in |
| "") |
| case ${target} in |
| *-*-*uclibc*) |
| with_nds32_lib=ulibc |
| ;; |
| *-*-linux*) |
| with_nds32_lib=glibc |
| ;; |
| *) |
| with_nds32_lib=newlib |
| tm_defines="${tm_defines} TARGET_DEFAULT_CTOR_DTOR=1" |
| ;; |
| esac |
| ;; |
| newlib) |
| # OK |
| tm_defines="${tm_defines} TARGET_DEFAULT_CTOR_DTOR=1" |
| ;; |
| mculib) |
| # OK |
| # for the arch=v3f or arch=v3s under mculib toolchain, |
| # we would like to set -fno-math-errno as default |
| case "${with_arch}" in |
| v3f | v3s) |
| tm_defines="${tm_defines} TARGET_DEFAULT_NO_MATH_ERRNO=1" |
| ;; |
| esac |
| ;; |
| glibc | uclibc) |
| # OK |
| ;; |
| *) |
| echo "Cannot accept --with-nds32-lib=$with_nds32_lib, available values are: newlib mculib glibc uclibc" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| # process --with-float |
| case "${with_float}" in |
| "" | soft | hard) |
| # OK |
| ;; |
| *) |
| echo "Cannot accept --with-float=$with_float, available values are: soft hard" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| # process --with-config-fpu |
| case "${with_config_fpu}" in |
| "" | 0 | 1 | 2 | 3) |
| # OK |
| ;; |
| *) |
| echo "Cannot accept --with-config-fpu=$with_config_fpu, available values from 0 to 7" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| |
| ;; |
| nios2*-*-*) |
| supported_defaults="arch" |
| case "$with_arch" in |
| "" | r1 | r2) |
| # OK |
| ;; |
| *) |
| echo "Unknown arch used in --with-arch=$with_arch" 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| |
| powerpc*-*-* | rs6000-*-*) |
| supported_defaults="abi cpu cpu_32 cpu_64 float tune tune_32 tune_64 advance_toolchain" |
| |
| for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do |
| eval "val=\$with_$which" |
| case ${val} in |
| default32 | default64) |
| case $which in |
| cpu | tune) |
| ;; |
| *) |
| echo "$val only valid for --with-cpu and --with-tune." 1>&2 |
| exit 1 |
| ;; |
| esac |
| with_which="with_$which" |
| eval $with_which= |
| ;; |
| 405cr) |
| tm_defines="${tm_defines} CONFIG_PPC405CR" |
| eval "with_$which=405" |
| ;; |
| "" | common | native \ |
| | power[3456789] | power10 | power5+ | power6x \ |
| | powerpc | powerpc64 | powerpc64le \ |
| | rs64 \ |
| | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \ |
| | 476 | 476fp | 505 | 601 | 602 | 603 | 603e | ec603e \ |
| | 604 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \ |
| | a2 | e300c[23] | 854[08] | e500mc | e500mc64 | e5500 | e6500 \ |
| | titan | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell) |
| # OK |
| ;; |
| *) |
| echo "Unknown cpu used in --with-$which=$val." 1>&2 |
| exit 1 |
| ;; |
| esac |
| done |
| |
| case "$with_abi" in |
| "" | elfv1 | elfv2 ) |
| #OK |
| ;; |
| *) |
| echo "Unknown ABI used in --with-abi=$with_abi" |
| exit 1 |
| ;; |
| esac |
| |
| if test "x$with_advance_toolchain" != x; then |
| if test -d "/opt/$with_advance_toolchain/." -a \ |
| -d "/opt/$with_advance_toolchain/bin/." -a \ |
| -d "/opt/$with_advance_toolchain/include/."; then |
| |
| tm_file="$tm_file ./advance-toolchain.h" |
| (at="/opt/$with_advance_toolchain" |
| echo "/* Use Advance Toolchain $at */" |
| echo |
| echo "#undef LINK_OS_NEW_DTAGS_SPEC" |
| echo "#define LINK_OS_NEW_DTAGS_SPEC" \ |
| "\"--enable-new-dtags\"" |
| echo |
| echo "#undef DYNAMIC_LINKER_PREFIX" |
| echo "#define DYNAMIC_LINKER_PREFIX \"$at\"" |
| echo |
| echo "#undef MD_EXEC_PREFIX" |
| echo "#define MD_EXEC_PREFIX \"$at/bin/\"" |
| echo |
| echo "#undef MD_STARTFILE_PREFIX" |
| echo "#define MD_STARTFILE_PREFIX \"$prefix/lib/\"" |
| echo |
| echo "#undef MD_STARTFILE_PREFIX_1" |
| echo "#define MD_STARTFILE_PREFIX_1 \"$at/lib/\"") \ |
| > advance-toolchain.h |
| else |
| echo "Unknown advance-toolchain $with_advance_toolchain" |
| exit 1 |
| fi |
| fi |
| |
| # Set up the default long double format if the user changed it. |
| if test x$with_long_double_format = xieee; then |
| tm_defines="${tm_defines} TARGET_IEEEQUAD_DEFAULT=1" |
| |
| elif test x$with_long_double_format = xibm; then |
| tm_defines="${tm_defines} TARGET_IEEEQUAD_DEFAULT=0" |
| fi |
| ;; |
| |
| s390*-*-*) |
| supported_defaults="arch mode tune" |
| |
| for which in arch tune; do |
| eval "val=\$with_$which" |
| case ${val} in |
| "" | native | z900 | z990 | z9-109 | z9-ec | z10 | z196 | zEC12 | z13 | z14 | z15 | z16 | arch5 | arch6 | arch7 | arch8 | arch9 | arch10 | arch11 | arch12 | arch13 | arch14 ) |
| # OK |
| ;; |
| *) |
| echo "Unknown cpu used in --with-$which=$val." 1>&2 |
| exit 1 |
| ;; |
| esac |
| done |
| |
| case ${with_mode} in |
| "" | esa | zarch) |
| # OK |
| ;; |
| *) |
| echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| |
| sh[123456ble]*-*-* | sh-*-*) |
| supported_defaults="cpu" |
| case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in |
| "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu ) |
| # OK |
| ;; |
| m2a | m2a-single | m2a-single-only | m2a-nofpu) |
| ;; |
| m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al) |
| ;; |
| *) |
| echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2 |
| echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2 |
| echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2 |
| echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| sparc*-*-*) |
| supported_defaults="cpu cpu_32 cpu_64 float tune tune_32 tune_64" |
| |
| for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do |
| eval "val=\$with_$which" |
| case ${val} in |
| "" | sparc | sparcv9 | sparc64 \ |
| | v7 | cypress \ |
| | v8 | supersparc | hypersparc | leon | leon3 | leon3v7 \ |
| | sparclite | f930 | f934 | sparclite86x \ |
| | sparclet | tsc701 \ |
| | v9 | ultrasparc | ultrasparc3 | niagara | niagara2 \ |
| | niagara3 | niagara4 | niagara7 | m8) |
| # OK |
| ;; |
| *) |
| echo "Unknown cpu used in --with-$which=$val" 1>&2 |
| exit 1 |
| ;; |
| esac |
| done |
| |
| case ${with_float} in |
| "" | soft | hard) |
| # OK |
| ;; |
| *) |
| echo "Unknown floating point type used in --with-float=$with_float" 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| |
| tic6x-*-*) |
| supported_defaults="arch" |
| |
| case ${with_arch} in |
| "" | c62x | c64x | c64x+ | c67x | c67x+ | c674x) |
| # OK |
| ;; |
| *) |
| echo "Unknown arch used in --with-arch=$with_arch." 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| |
| v850*-*-*) |
| supported_defaults=cpu |
| case ${with_cpu} in |
| "" | v850e | v850e1 | v850e2 | v850es | v850e2v3 | v850e3v5) |
| # OK |
| ;; |
| *) |
| echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| visium-*-*) |
| supported_defaults="cpu" |
| case $with_cpu in |
| "" | gr5 | gr6) |
| ;; |
| *) echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| esac |
| |
| # Targets for which there is at least one VxWorks port should include |
| # vxworks-dummy.h to allow safe references to various TARGET_VXWORKS kinds |
| # of markers from other files in the port, including the vxworks*.h files to |
| # distinguish VxWorks variants such as VxWorks 7 or 64). |
| |
| case ${target} in |
| arm*-*-* | i[34567]86-*-* | mips*-*-* | powerpc*-*-* | sh*-*-* \ |
| | sparc*-*-* | x86_64-*-*) |
| tm_file="vxworks-dummy.h ${tm_file}" |
| ;; |
| esac |
| |
| # Set some miscellaneous flags for particular targets. |
| target_cpu_default2= |
| case ${target} in |
| aarch64*-*-*) |
| if test x"$target_cpu_cname" != x |
| then |
| target_cpu_default2=$target_cpu_cname |
| fi |
| ;; |
| |
| arm*-*-*) |
| if test x$with_cpu = x |
| then |
| echo "Don't know the target cpu" 1>&2 |
| exit 1 |
| else |
| target_cpu_default2="\\\"$with_cpu\\\"" |
| fi |
| ;; |
| |
| hppa*-*-*) |
| if test x$gas = xyes |
| then |
| target_cpu_default2="MASK_GAS" |
| fi |
| ;; |
| |
| fido*-*-* | m68k*-*-*) |
| target_cpu_default2=$m68k_cpu_ident |
| tmake_file="m68k/t-opts $tmake_file" |
| if [ x"$m68k_arch_family" != x ]; then |
| tmake_file="m68k/t-$m68k_arch_family $tmake_file" |
| fi |
| ;; |
| |
| i[34567]86-*-darwin* | x86_64-*-darwin*) |
| ;; |
| i[34567]86-*-linux* | x86_64-*-linux*) |
| extra_objs="${extra_objs} gnu-property.o" |
| tmake_file="$tmake_file i386/t-linux i386/t-gnu-property" |
| ;; |
| i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu) |
| tmake_file="$tmake_file i386/t-kfreebsd" |
| ;; |
| i[34567]86-*-gnu*) |
| tmake_file="$tmake_file i386/t-gnu" |
| ;; |
| i[34567]86-*-msdosdjgpp*) |
| tmake_file="${tmake_file} i386/t-djgpp" |
| ;; |
| i[34567]86-*-solaris2* | x86_64-*-solaris2*) |
| ;; |
| i[34567]86-*-cygwin* | x86_64-*-cygwin*) |
| ;; |
| i[34567]86-*-mingw* | x86_64-*-mingw*) |
| ;; |
| i[34567]86-*-dragonfly* | x86_64-*-dragonfly*) |
| ;; |
| i[34567]86-*-freebsd*) |
| ;; |
| x86_64-*-freebsd*) |
| tmake_file="${tmake_file} i386/t-freebsd64" |
| ;; |
| ia64*-*-linux*) |
| ;; |
| |
| mips*-*-*) |
| if test x$gnu_ld = xyes |
| then |
| target_cpu_default2="MASK_SPLIT_ADDRESSES" |
| fi |
| case ${target} in |
| mips*el-*-*) |
| tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines" |
| ;; |
| esac |
| if test x$with_arch != x; then |
| default_mips_arch=$with_arch |
| fi |
| if test x$with_abi != x; then |
| default_mips_abi=$with_abi |
| fi |
| case ${default_mips_arch} in |
| mips1) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS1" ;; |
| mips2) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS2" ;; |
| mips3) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3" ;; |
| mips4) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS4" ;; |
| mips32) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32" ;; |
| mips32r2) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2" ;; |
| mips32r6) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6" ;; |
| mips64) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64" ;; |
| mips64r2) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R2" ;; |
| mips64r6) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R6" ;; |
| esac |
| case ${default_mips_abi} in |
| 32) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_32" ;; |
| o64) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_O64" ;; |
| n32) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_N32" ;; |
| 64) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_64" ;; |
| eabi) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_EABI" ;; |
| esac |
| tmake_file="mips/t-mips $tmake_file" |
| ;; |
| |
| loongarch*-*-*) |
| # Export canonical triplet. |
| tm_defines="${tm_defines} LA_MULTIARCH_TRIPLET=${la_canonical_triplet}" |
| |
| # Define macro LA_DISABLE_MULTILIB if --disable-multilib |
| tm_defines="${tm_defines} TM_MULTILIB_LIST=${loongarch_multilib_list_c}" |
| if test x$enable_multilib = xyes; then |
| TM_MULTILIB_CONFIG="${loongarch_multilib_list_make}" |
| else |
| tm_defines="${tm_defines} LA_DISABLE_MULTILIB" |
| fi |
| |
| # Let --with- flags initialize the enum variables from loongarch.opt. |
| # See macro definitions from loongarch-opts.h and loongarch-cpu.h. |
| case ${with_arch} in |
| native) tm_defines="${tm_defines} DEFAULT_CPU_ARCH=CPU_NATIVE" ;; |
| la464) tm_defines="${tm_defines} DEFAULT_CPU_ARCH=CPU_LA464" ;; |
| loongarch64) tm_defines="${tm_defines} DEFAULT_CPU_ARCH=CPU_LOONGARCH64" ;; |
| esac |
| |
| case ${with_tune} in |
| native) tm_defines="${tm_defines} DEFAULT_CPU_TUNE=CPU_NATIVE" ;; |
| la464) tm_defines="${tm_defines} DEFAULT_CPU_TUNE=CPU_LA464" ;; |
| loongarch64) tm_defines="${tm_defines} DEFAULT_CPU_TUNE=CPU_LOONGARCH64" ;; |
| esac |
| |
| case ${with_abi} in |
| lp64d) tm_defines="${tm_defines} DEFAULT_ABI_BASE=ABI_BASE_LP64D" ;; |
| lp64f) tm_defines="${tm_defines} DEFAULT_ABI_BASE=ABI_BASE_LP64F" ;; |
| lp64s) tm_defines="${tm_defines} DEFAULT_ABI_BASE=ABI_BASE_LP64S" ;; |
| esac |
| |
| case ${with_abiext} in |
| base) tm_defines="${tm_defines} DEFAULT_ABI_EXT=ABI_EXT_BASE" ;; |
| esac |
| |
| case ${with_fpu} in |
| none) tm_defines="$tm_defines DEFAULT_ISA_EXT_FPU=ISA_EXT_NOFPU" ;; |
| 32) tm_defines="$tm_defines DEFAULT_ISA_EXT_FPU=ISA_EXT_FPU32" ;; |
| 64) tm_defines="$tm_defines DEFAULT_ISA_EXT_FPU=ISA_EXT_FPU64" ;; |
| esac |
| |
| tmake_file="loongarch/t-loongarch $tmake_file" |
| ;; |
| |
| powerpc*-*-* | rs6000-*-*) |
| # FIXME: The PowerPC port uses the value set at compile time, |
| # although it's only cosmetic. |
| if test "x$with_cpu" != x |
| then |
| target_cpu_default2="\\\"$with_cpu\\\"" |
| fi |
| out_file="${cpu_type}/${cpu_type}.cc" |
| c_target_objs="${c_target_objs} ${cpu_type}-c.o" |
| cxx_target_objs="${cxx_target_objs} ${cpu_type}-c.o" |
| d_target_objs="${d_target_objs} ${cpu_type}-d.o" |
| tmake_file="${cpu_type}/t-${cpu_type} ${tmake_file}" |
| ;; |
| |
| sh[123456ble]*-*-* | sh-*-*) |
| c_target_objs="${c_target_objs} sh-c.o" |
| cxx_target_objs="${cxx_target_objs} sh-c.o" |
| ;; |
| |
| sparc*-*-*) |
| # Some standard aliases. |
| case x$with_cpu in |
| xsparc) |
| with_cpu=v7 |
| ;; |
| xsparcv9 | xsparc64) |
| with_cpu=v9 |
| ;; |
| esac |
| |
| if test x$with_tune = x ; then |
| case ${target} in |
| *-leon-*) |
| with_tune=leon |
| ;; |
| *-leon[3-9]*) |
| with_tune=leon3 |
| ;; |
| esac |
| fi |
| |
| # The SPARC port checks this value at compile-time. |
| target_cpu_default2="TARGET_CPU_$with_cpu" |
| ;; |
| |
| v850*-*-*) |
| case "x$with_cpu" in |
| x) |
| ;; |
| xv850e | xv850e1 | xv850e2 | xv850e2v3 | xv850e3v5) |
| target_cpu_default2="TARGET_CPU_$with_cpu" |
| ;; |
| xv850es) |
| target_cpu_default2="TARGET_CPU_v850e1" |
| ;; |
| esac |
| ;; |
| visium-*-*) |
| target_cpu_default2="TARGET_CPU_$with_cpu" |
| ;; |
| esac |
| |
| t= |
| all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu nan fp_32 odd_spreg_32 divide llsc mips-plt synci tls lxc1-sxc1 madd4 isa_spec" |
| for option in $all_defaults |
| do |
| eval "val=\$with_"`echo $option | sed s/-/_/g` |
| if test -n "$val"; then |
| case " $supported_defaults " in |
| *" $option "*) |
| ;; |
| *) |
| echo "This target does not support --with-$option." 2>&1 |
| echo "Valid --with options are: $supported_defaults" 2>&1 |
| exit 1 |
| ;; |
| esac |
| |
| if test "x$t" = x |
| then |
| t="{ \"$option\", \"$val\" }" |
| else |
| t="${t}, { \"$option\", \"$val\" }" |
| fi |
| fi |
| done |
| |
| if test "x$t" = x |
| then |
| configure_default_options="{ { NULL, NULL} }" |
| else |
| configure_default_options="{ ${t} }" |
| fi |
| |
| if test "$target_cpu_default2" != "" |
| then |
| if test "$target_cpu_default" != "" |
| then |
| target_cpu_default="(${target_cpu_default}|${target_cpu_default2})" |
| else |
| target_cpu_default=$target_cpu_default2 |
| fi |
| fi |
| |
| case ${target} in |
| i[34567]86-*-* | x86_64-*-*) |
| if test x$enable_as_accelerator = xyes; then |
| extra_programs="mkoffload\$(exeext)" |
| fi |
| ;; |
| esac |