| # Makefile.in generated by automake 1.15.1 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994-2017 Free Software Foundation, Inc. |
| |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| VPATH = @srcdir@ |
| am__is_gnu_make = { \ |
| if test -z '$(MAKELEVEL)'; then \ |
| false; \ |
| elif test -n '$(MAKE_HOST)'; then \ |
| true; \ |
| elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ |
| true; \ |
| else \ |
| false; \ |
| fi; \ |
| } |
| am__make_running_with_option = \ |
| case $${target_option-} in \ |
| ?) ;; \ |
| *) echo "am__make_running_with_option: internal error: invalid" \ |
| "target option '$${target_option-}' specified" >&2; \ |
| exit 1;; \ |
| esac; \ |
| has_opt=no; \ |
| sane_makeflags=$$MAKEFLAGS; \ |
| if $(am__is_gnu_make); then \ |
| sane_makeflags=$$MFLAGS; \ |
| else \ |
| case $$MAKEFLAGS in \ |
| *\\[\ \ ]*) \ |
| bs=\\; \ |
| sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ |
| | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ |
| esac; \ |
| fi; \ |
| skip_next=no; \ |
| strip_trailopt () \ |
| { \ |
| flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ |
| }; \ |
| for flg in $$sane_makeflags; do \ |
| test $$skip_next = yes && { skip_next=no; continue; }; \ |
| case $$flg in \ |
| *=*|--*) continue;; \ |
| -*I) strip_trailopt 'I'; skip_next=yes;; \ |
| -*I?*) strip_trailopt 'I';; \ |
| -*O) strip_trailopt 'O'; skip_next=yes;; \ |
| -*O?*) strip_trailopt 'O';; \ |
| -*l) strip_trailopt 'l'; skip_next=yes;; \ |
| -*l?*) strip_trailopt 'l';; \ |
| -[dEDm]) skip_next=yes;; \ |
| -[JT]) skip_next=yes;; \ |
| esac; \ |
| case $$flg in \ |
| *$$target_option*) has_opt=yes; break;; \ |
| esac; \ |
| done; \ |
| test $$has_opt = yes |
| am__make_dryrun = (target_option=n; $(am__make_running_with_option)) |
| am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| target_triplet = @target@ |
| subdir = testsuite |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \ |
| $(top_srcdir)/../config/enable.m4 \ |
| $(top_srcdir)/../config/futex.m4 \ |
| $(top_srcdir)/../config/hwcaps.m4 \ |
| $(top_srcdir)/../config/iconv.m4 \ |
| $(top_srcdir)/../config/lead-dot.m4 \ |
| $(top_srcdir)/../config/lib-ld.m4 \ |
| $(top_srcdir)/../config/lib-link.m4 \ |
| $(top_srcdir)/../config/lib-prefix.m4 \ |
| $(top_srcdir)/../config/lthostflags.m4 \ |
| $(top_srcdir)/../config/multi.m4 \ |
| $(top_srcdir)/../config/no-executables.m4 \ |
| $(top_srcdir)/../config/override.m4 \ |
| $(top_srcdir)/../config/stdint.m4 \ |
| $(top_srcdir)/../config/toolexeclibdir.m4 \ |
| $(top_srcdir)/../config/unwind_ipinfo.m4 \ |
| $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \ |
| $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \ |
| $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \ |
| $(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \ |
| $(top_srcdir)/../config/gc++filt.m4 \ |
| $(top_srcdir)/../config/tls.m4 $(top_srcdir)/../config/gthr.m4 \ |
| $(top_srcdir)/../config/cet.m4 $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| DIST_COMMON = $(srcdir)/Makefile.am |
| CONFIG_HEADER = $(top_builddir)/config.h |
| CONFIG_CLEAN_FILES = |
| CONFIG_CLEAN_VPATH_FILES = |
| AM_V_P = $(am__v_P_@AM_V@) |
| am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) |
| am__v_P_0 = false |
| am__v_P_1 = : |
| AM_V_GEN = $(am__v_GEN_@AM_V@) |
| am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) |
| am__v_GEN_0 = @echo " GEN " $@; |
| am__v_GEN_1 = |
| AM_V_at = $(am__v_at_@AM_V@) |
| am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) |
| am__v_at_0 = @ |
| am__v_at_1 = |
| depcomp = |
| am__depfiles_maybe = |
| SOURCES = |
| am__can_run_installinfo = \ |
| case $$AM_UPDATE_INFO_DIR in \ |
| n|no|NO) false;; \ |
| *) (install-info --version) >/dev/null 2>&1;; \ |
| esac |
| am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) |
| ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@ |
| ACLOCAL = @ACLOCAL@ |
| ALLOCATOR_H = @ALLOCATOR_H@ |
| ALLOCATOR_NAME = @ALLOCATOR_NAME@ |
| AMTAR = @AMTAR@ |
| AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ |
| AR = @AR@ |
| AS = @AS@ |
| ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@ |
| ATOMIC_FLAGS = @ATOMIC_FLAGS@ |
| ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| BASIC_FILE_CC = @BASIC_FILE_CC@ |
| BASIC_FILE_H = @BASIC_FILE_H@ |
| CC = @CC@ |
| CCODECVT_CC = @CCODECVT_CC@ |
| CCOLLATE_CC = @CCOLLATE_CC@ |
| CCTYPE_CC = @CCTYPE_CC@ |
| CFLAGS = @CFLAGS@ |
| CLOCALE_CC = @CLOCALE_CC@ |
| CLOCALE_H = @CLOCALE_H@ |
| CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@ |
| CMESSAGES_CC = @CMESSAGES_CC@ |
| CMESSAGES_H = @CMESSAGES_H@ |
| CMONEY_CC = @CMONEY_CC@ |
| CNUMERIC_CC = @CNUMERIC_CC@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CPU_DEFINES_SRCDIR = @CPU_DEFINES_SRCDIR@ |
| CPU_OPT_BITS_RANDOM = @CPU_OPT_BITS_RANDOM@ |
| CPU_OPT_EXT_RANDOM = @CPU_OPT_EXT_RANDOM@ |
| CSTDIO_H = @CSTDIO_H@ |
| CTIME_CC = @CTIME_CC@ |
| CTIME_H = @CTIME_H@ |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| CXXFILT = @CXXFILT@ |
| CXXFLAGS = @CXXFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| C_INCLUDE_DIR = @C_INCLUDE_DIR@ |
| DBLATEX = @DBLATEX@ |
| DEBUG_FLAGS = @DEBUG_FLAGS@ |
| DEFS = @DEFS@ |
| DOT = @DOT@ |
| DOXYGEN = @DOXYGEN@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| ERROR_CONSTANTS_SRCDIR = @ERROR_CONSTANTS_SRCDIR@ |
| EXEEXT = @EXEEXT@ |
| EXTRA_CFLAGS = @EXTRA_CFLAGS@ |
| EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@ |
| FGREP = @FGREP@ |
| GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@ |
| GLIBCXX_LIBS = @GLIBCXX_LIBS@ |
| GREP = @GREP@ |
| HWCAP_CFLAGS = @HWCAP_CFLAGS@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBICONV = @LIBICONV@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LONG_DOUBLE_128_FLAGS = @LONG_DOUBLE_128_FLAGS@ |
| LONG_DOUBLE_ALT128_COMPAT_FLAGS = @LONG_DOUBLE_ALT128_COMPAT_FLAGS@ |
| LONG_DOUBLE_COMPAT_FLAGS = @LONG_DOUBLE_COMPAT_FLAGS@ |
| LTLIBICONV = @LTLIBICONV@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAINT = @MAINT@ |
| MAKEINFO = @MAKEINFO@ |
| MKDIR_P = @MKDIR_P@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@ |
| OPT_LDFLAGS = @OPT_LDFLAGS@ |
| OS_INC_SRCDIR = @OS_INC_SRCDIR@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PDFLATEX = @PDFLATEX@ |
| RANLIB = @RANLIB@ |
| SECTION_FLAGS = @SECTION_FLAGS@ |
| SECTION_LDFLAGS = @SECTION_LDFLAGS@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| SYMVER_FILE = @SYMVER_FILE@ |
| TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@ |
| USE_NLS = @USE_NLS@ |
| VERSION = @VERSION@ |
| VTV_CXXFLAGS = @VTV_CXXFLAGS@ |
| VTV_CXXLINKFLAGS = @VTV_CXXLINKFLAGS@ |
| VTV_PCH_CXXFLAGS = @VTV_PCH_CXXFLAGS@ |
| WARN_FLAGS = @WARN_FLAGS@ |
| XMLCATALOG = @XMLCATALOG@ |
| XMLLINT = @XMLLINT@ |
| XSLTPROC = @XSLTPROC@ |
| XSL_STYLE_DIR = @XSL_STYLE_DIR@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_CXX = @ac_ct_CXX@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| am__leading_dot = @am__leading_dot@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| baseline_dir = @baseline_dir@ |
| baseline_subdir_switch = @baseline_subdir_switch@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| check_msgfmt = @check_msgfmt@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| enable_shared = @enable_shared@ |
| enable_static = @enable_static@ |
| exec_prefix = @exec_prefix@ |
| get_gcc_base_ver = @get_gcc_base_ver@ |
| glibcxx_MOFILES = @glibcxx_MOFILES@ |
| glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@ |
| glibcxx_POFILES = @glibcxx_POFILES@ |
| glibcxx_builddir = @glibcxx_builddir@ |
| glibcxx_compiler_pic_flag = @glibcxx_compiler_pic_flag@ |
| glibcxx_compiler_shared_flag = @glibcxx_compiler_shared_flag@ |
| glibcxx_cxx98_abi = @glibcxx_cxx98_abi@ |
| glibcxx_localedir = @glibcxx_localedir@ |
| glibcxx_lt_pic_flag = @glibcxx_lt_pic_flag@ |
| glibcxx_prefixdir = @glibcxx_prefixdir@ |
| glibcxx_srcdir = @glibcxx_srcdir@ |
| glibcxx_toolexecdir = @glibcxx_toolexecdir@ |
| glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@ |
| gxx_include_dir = @gxx_include_dir@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| libtool_VERSION = @libtool_VERSION@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| lt_host_flags = @lt_host_flags@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| multi_basedir = @multi_basedir@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| port_specific_symbol_files = @port_specific_symbol_files@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| python_mod_dir = @python_mod_dir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| sysconfdir = @sysconfdir@ |
| target = @target@ |
| target_alias = @target_alias@ |
| target_cpu = @target_cpu@ |
| target_os = @target_os@ |
| target_vendor = @target_vendor@ |
| thread_header = @thread_header@ |
| tmake_file = @tmake_file@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| toplevel_builddir = @toplevel_builddir@ |
| toplevel_srcdir = @toplevel_srcdir@ |
| AUTOMAKE_OPTIONS = nostdinc |
| RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir |
| EXPECT = expect |
| |
| # May be used by various substitution variables. |
| gcc_version := $(shell @get_gcc_base_ver@ $(top_srcdir)/../gcc/BASE-VER) |
| MAINT_CHARSET = latin1 |
| mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs |
| PWD_COMMAND = $${PWDCMD-pwd} |
| STAMP = echo timestamp > |
| toolexecdir = $(glibcxx_toolexecdir) |
| toolexeclibdir = $(glibcxx_toolexeclibdir) |
| @ENABLE_WERROR_FALSE@WERROR_FLAG = |
| @ENABLE_WERROR_TRUE@WERROR_FLAG = -Werror |
| @ENABLE_EXTERN_TEMPLATE_FALSE@XTEMPLATE_FLAGS = |
| @ENABLE_EXTERN_TEMPLATE_TRUE@XTEMPLATE_FLAGS = -fno-implicit-templates |
| @GLIBCXX_LDBL_ALT128_COMPAT_FALSE@LDBL_128_FLAGS = |
| @GLIBCXX_LDBL_ALT128_COMPAT_TRUE@LDBL_128_FLAGS = $(LONG_DOUBLE_128_FLAGS) |
| |
| # These bits are all figured out from configure. Look in acinclude.m4 |
| # or configure.ac to see how they are set. See GLIBCXX_EXPORT_FLAGS. |
| CONFIG_CXXFLAGS = \ |
| $(SECTION_FLAGS) $(HWCAP_CFLAGS) -frandom-seed=$@ $(LDBL_128_FLAGS) |
| |
| WARN_CXXFLAGS = \ |
| $(WARN_FLAGS) $(WERROR_FLAG) -fdiagnostics-show-location=once |
| |
| |
| # -I/-D flags to pass when compiling. |
| AM_CPPFLAGS = $(GLIBCXX_INCLUDES) $(CPPFLAGS) |
| |
| # Generated lists of files to run. All of these names are valid make |
| # targets, if you wish to generate a list manually. |
| lists_of_files = \ |
| testsuite_files \ |
| testsuite_files_interactive \ |
| testsuite_files_performance \ |
| testsuite_files_simd |
| |
| extract_symvers = $(glibcxx_builddir)/scripts/extract_symvers |
| baseline_subdir := $(shell $(CXX) $(baseline_subdir_switch)) |
| check_p_numbers0 := 1 2 3 4 5 6 7 8 9 |
| check_p_numbers1 := 0 $(check_p_numbers0) |
| check_p_numbers2 := $(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers1))) |
| check_p_numbers3 := $(addprefix 0,$(check_p_numbers1)) $(check_p_numbers2) |
| check_p_numbers4 := $(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers3))) |
| check_p_numbers5 := $(addprefix 0,$(check_p_numbers3)) $(check_p_numbers4) |
| check_p_numbers6 := $(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers5))) |
| check_p_numbers := $(check_p_numbers0) $(check_p_numbers2) $(check_p_numbers4) $(check_p_numbers6) |
| check_p_subdirs = $(wordlist 1,$(if $(GCC_TEST_PARALLEL_SLOTS),$(GCC_TEST_PARALLEL_SLOTS),128),$(check_p_numbers)) |
| check_DEJAGNU_normal_targets = $(addprefix check-DEJAGNUnormal,$(check_p_subdirs)) |
| |
| # Runs the testsuite, but in compile only mode. |
| # Can be used to test sources with non-GNU FE's at various warning |
| # levels and for checking compile time across releases. |
| # See script. |
| compile_script = ${glibcxx_srcdir}/scripts/check_compile |
| |
| # Runs the testsuite/performance tests. |
| # Some of these tests create large (~75MB) files, allocate huge |
| # ammounts of memory, or otherwise tie up machine resources. Thus, |
| # running this is off by default. |
| # XXX Need to add dependency on libtestc++.a |
| check_performance_script = ${glibcxx_srcdir}/scripts/check_performance |
| |
| # Runs the testsuite in debug mode. |
| debug_flags = "unix/-D_GLIBCXX_DEBUG" |
| |
| # Runs the testsuite in parallel mode. |
| libgomp_dir = ${glibcxx_builddir}/../libgomp |
| libgomp_flags = -B${glibcxx_builddir}/../libgomp \ |
| -I${glibcxx_builddir}/../libgomp \ |
| -L${glibcxx_builddir}/../libgomp/.libs -lgomp |
| |
| atomic_flags = $(ATOMIC_FLAGS) |
| parallel_flags = "unix/-D_GLIBCXX_PARALLEL/-fopenmp" |
| |
| # By adding these files here, automake will remove them for 'make clean' |
| CLEANFILES = *.txt *.tst *.exe core* filebuf_* tmp* ostream_* *.log *.sum \ |
| testsuite_* site.exp abi_check baseline_symbols *TEST* *.dat \ |
| *.ii *.s *.o *.cc *.x *.a *.so *.xml *.raw *.out *.gdb |
| |
| all: all-am |
| |
| .SUFFIXES: |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ |
| && { if test -f $@; then exit 0; else break; fi; }; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps testsuite/Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign --ignore-deps testsuite/Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| esac; |
| $(top_srcdir)/fragment.am $(am__empty): |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(am__aclocal_m4_deps): |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| tags TAGS: |
| |
| ctags CTAGS: |
| |
| cscope cscopelist: |
| |
| check-am: all-am |
| check: check-am |
| all-am: Makefile |
| installdirs: |
| install: install-am |
| install-exec: install-exec-am |
| install-data: install-data-am |
| uninstall: uninstall-am |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-am |
| install-strip: |
| if test -z '$(STRIP)'; then \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| install; \ |
| else \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| fi |
| mostlyclean-generic: |
| |
| clean-generic: |
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-am |
| |
| clean-am: clean-generic clean-libtool clean-local mostlyclean-am |
| |
| distclean: distclean-am |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic |
| |
| dvi: dvi-am |
| |
| dvi-am: |
| |
| html: html-am |
| |
| html-am: |
| |
| info: info-am |
| |
| info-am: |
| |
| install-data-am: |
| |
| install-dvi: install-dvi-am |
| |
| install-dvi-am: |
| |
| install-exec-am: |
| |
| install-html: install-html-am |
| |
| install-html-am: |
| |
| install-info: install-info-am |
| |
| install-info-am: |
| |
| install-man: |
| |
| install-pdf: install-pdf-am |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-am |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-am |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-am |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-am |
| |
| pdf-am: |
| |
| ps: ps-am |
| |
| ps-am: |
| |
| uninstall-am: |
| |
| .MAKE: install-am install-strip |
| |
| .PHONY: all all-am check check-am clean clean-generic clean-libtool \ |
| clean-local cscopelist-am ctags-am distclean distclean-generic \ |
| distclean-libtool dvi dvi-am html html-am info info-am install \ |
| install-am install-data install-data-am install-dvi \ |
| install-dvi-am install-exec install-exec-am install-html \ |
| install-html-am install-info install-info-am install-man \ |
| install-pdf install-pdf-am install-ps install-ps-am \ |
| install-strip installcheck installcheck-am installdirs \ |
| maintainer-clean maintainer-clean-generic mostlyclean \ |
| mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ |
| tags-am uninstall uninstall-am |
| |
| .PRECIOUS: Makefile |
| |
| |
| # This rule generates all of the testsuite_files* lists at once. |
| ${lists_of_files}: |
| ${glibcxx_srcdir}/scripts/create_testsuite_files \ |
| ${glibcxx_srcdir}/testsuite `${PWD_COMMAND}` |
| |
| # We need more things in site.exp, but automake completely controls the |
| # creation of that file; there's no way to append to it without messing up |
| # the dependancy chains. So we overrule automake. This rule is exactly |
| # what it would have generated, plus our own additions. |
| site.exp: Makefile |
| @echo 'Making a new site.exp file...' |
| @echo '## these variables are automatically generated by make ##' >site.tmp |
| @echo '# Do not edit here. If you wish to override these values' >>site.tmp |
| @echo '# edit the last section' >>site.tmp |
| @echo 'set tool libstdc++' >>site.tmp |
| @echo 'set srcdir $(srcdir)' >>site.tmp |
| @echo "set objdir `pwd`" >>site.tmp |
| @echo 'set build_alias "$(build_alias)"' >>site.tmp |
| @echo 'set build_triplet $(build_triplet)' >>site.tmp |
| @echo 'set host_alias "$(host_alias)"' >>site.tmp |
| @echo 'set host_triplet $(host_triplet)' >>site.tmp |
| @echo 'set target_alias "$(target_alias)"' >>site.tmp |
| @echo 'set target_triplet $(target_triplet)' >>site.tmp |
| @echo 'set libiconv "$(LIBICONV)"' >>site.tmp |
| @echo 'set baseline_dir "$(baseline_dir)"' >> site.tmp |
| @echo 'set baseline_subdir_switch "$(baseline_subdir_switch)"' >> site.tmp |
| @echo 'set TEST_GCC_EXEC_PREFIX "$(libdir)/gcc/"' >> site.tmp |
| @echo '## All variables above are generated by configure. Do Not Edit ##' >>site.tmp |
| @test ! -f site.exp || \ |
| sed '1,/^## All variables above are.*##/ d' site.exp >> site.tmp |
| @-rm -f site.bak |
| @test ! -f site.exp || mv site.exp site.bak |
| @mv site.tmp site.exp |
| |
| baseline_symbols: |
| -@(output=${baseline_dir}/${baseline_subdir}/baseline_symbols.txt; \ |
| if test ! -f $${output}; then \ |
| echo "Baseline file doesn't exist."; \ |
| echo "Try 'make new-abi-baseline' to create it."; \ |
| exit 1; \ |
| fi; true) |
| |
| new-abi-baseline: |
| -@$(mkinstalldirs) ${baseline_dir}/${baseline_subdir} |
| -@(output=${baseline_dir}/${baseline_subdir}/baseline_symbols.txt; \ |
| if test -f $${output}; then \ |
| output=$${output}.new; \ |
| t=`echo $${output} | sed 's=.*config/abi/=='`; \ |
| echo "Baseline file already exists, writing to $${t} instead."; \ |
| fi; \ |
| ${extract_symvers} ../src/.libs/libstdc++.so $${output}) |
| |
| %/site.exp: site.exp |
| -@test -d $* || mkdir $* |
| @srcdir=`cd $(srcdir); ${PWD_COMMAND}`; |
| @objdir=`${PWD_COMMAND}`/$*; \ |
| sed -e "s|^set srcdir .*$$|set srcdir $$srcdir|" \ |
| -e "s|^set objdir .*$$|set objdir $$objdir|" \ |
| site.exp > $*/site.exp.tmp |
| @-rm -f $*/site.bak |
| @test ! -f $*/site.exp || mv $*/site.exp $*/site.bak |
| @mv $*/site.exp.tmp $*/site.exp |
| $(check_DEJAGNU_normal_targets): check-DEJAGNUnormal%: normal%/site.exp |
| |
| # Run the testsuite in normal mode. |
| check-DEJAGNU $(check_DEJAGNU_normal_targets): check-DEJAGNU%: site.exp |
| $(if $*,@)AR="$(AR)"; export AR; \ |
| RANLIB="$(RANLIB)"; export RANLIB; \ |
| if [ -z "$*" ] && [ -n "$(filter -j%, $(MFLAGS))" ]; then \ |
| rm -rf normal-parallel || true; \ |
| mkdir normal-parallel; \ |
| $(MAKE) $(AM_MAKEFLAGS) $(check_DEJAGNU_normal_targets); \ |
| rm -rf normal-parallel || true; \ |
| for idx in $(check_p_subdirs); do \ |
| if [ -d normal$$idx ]; then \ |
| mv -f normal$$idx/libstdc++.sum normal$$idx/libstdc++.sum.sep; \ |
| mv -f normal$$idx/libstdc++.log normal$$idx/libstdc++.log.sep; \ |
| fi; \ |
| done; \ |
| $(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh \ |
| normal[0-9]*/libstdc++.sum.sep > libstdc++.sum; \ |
| $(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh -L \ |
| normal[0-9]*/libstdc++.log.sep > libstdc++.log; \ |
| exit 0; \ |
| fi; \ |
| srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \ |
| EXPECT=$(EXPECT); export EXPECT; \ |
| runtest=$(RUNTEST); \ |
| if [ -z "$$runtest" ]; then runtest=runtest; fi; \ |
| tool=libstdc++; \ |
| if [ -n "$*" ]; then \ |
| if [ -f normal-parallel/finished ]; then rm -rf "$*"; exit 0; fi; \ |
| GCC_RUNTEST_PARALLELIZE_DIR=`${PWD_COMMAND}`/normal-parallel; \ |
| export GCC_RUNTEST_PARALLELIZE_DIR; \ |
| cd "$*"; \ |
| fi; \ |
| if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \ |
| $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \ |
| $(RUNTESTFLAGS); \ |
| if [ -n "$*" ]; then \ |
| touch $$GCC_RUNTEST_PARALLELIZE_DIR/finished; \ |
| fi; \ |
| else \ |
| echo "WARNING: could not find \`runtest'" 1>&2; :;\ |
| fi |
| |
| check-am: |
| $(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU |
| .PHONY: check-DEJAGNU |
| |
| # Use 'new-abi-baseline' to create an initial symbol file. Then run |
| # 'check-abi' to test for changes against that file. |
| check-abi: site.exp baseline_symbols |
| -@runtest $(AM_RUNTESTFLAGS) --tool libstdc++ $(RUNTESTFLAGS) abi.exp |
| check-compile: testsuite_files ${compile_script} |
| -@(chmod + ${compile_script}; \ |
| ${compile_script} ${glibcxx_srcdir} ${glibcxx_builddir}) |
| check-performance: testsuite_files_performance ${performance_script} |
| -@(chmod + ${check_performance_script}; \ |
| CXXFLAGS='$(CXXFLAGS)'; export CXXFLAGS; \ |
| ${check_performance_script} ${glibcxx_srcdir} ${glibcxx_builddir}) |
| |
| # Runs the simd tests. |
| check-simd: $(srcdir)/experimental/simd/generate_makefile.sh \ |
| ${glibcxx_srcdir}/scripts/check_simd \ |
| testsuite_files_simd \ |
| ${glibcxx_builddir}/scripts/testsuite_flags |
| @rm -f .simd.summary |
| @echo "Generating simd testsuite subdirs and Makefiles ..." |
| @${glibcxx_srcdir}/scripts/check_simd "${glibcxx_srcdir}" "${glibcxx_builddir}" "$(CXXFLAGS)" | \ |
| while read subdir; do \ |
| $(MAKE) -C "$${subdir}"; \ |
| tail -n20 $${subdir}/simd_testsuite.sum | \ |
| grep -A20 -B1 'Summary ===' >> .simd.summary; \ |
| done; \ |
| cat .simd.summary && rm .simd.summary |
| |
| check-debug: site.exp |
| outputdir=debug; export outputdir; \ |
| if test ! -d $${outputdir}; then \ |
| mkdir $${outputdir}; \ |
| fi; \ |
| srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \ |
| EXPECT=$(EXPECT); export EXPECT; \ |
| $(MAKE) RUNTESTFLAGS="$(RUNTESTFLAGS) conformance.exp --outdir $${outputdir} --objdir $${outputdir} --target_board=$(debug_flags)" check-DEJAGNU; |
| |
| check-parallel: site.exp |
| -@(if test ! -d $${libgomp_dir}; then \ |
| echo "Testing parallel mode failed as libgomp not present."; \ |
| exit 1; \ |
| fi; \ |
| outputdir=parallel; export outputdir; \ |
| if test ! -d $${outputdir}; then \ |
| mkdir $${outputdir}; \ |
| fi; \ |
| srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \ |
| EXPECT=$(EXPECT); export EXPECT; \ |
| $(MAKE) CXXFLAGS="$(atomic_flags) $(libgomp_flags)" RUNTESTFLAGS="$(RUNTESTFLAGS) conformance.exp --outdir $${outputdir} --objdir $${outputdir} --target_board=$(parallel_flags)" check-DEJAGNU; ) |
| |
| check-performance-parallel: testsuite_files_performance ${performance_script} |
| -@(chmod + ${check_performance_script}; \ |
| CXXFLAGS="-D_GLIBCXX_PARALLEL -fopenmp $(atomic_flags) $(libgomp_flags)"; export CXXFLAGS; \ |
| ${check_performance_script} ${glibcxx_srcdir} ${glibcxx_builddir}) |
| |
| .PHONY: baseline_symbols new-abi-baseline \ |
| check-abi check-compile check-performance check-parallel |
| |
| # To remove directories. |
| clean-local: |
| rm -rf de fr debug parallel binaries normal* simd |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
