| dnl | |
| dnl GLIBCXX_CONDITIONAL (NAME, SHELL-TEST) | |
| dnl | |
| dnl Exactly like AM_CONDITIONAL, but delays evaluation of the test until the | |
| dnl end of configure. This lets tested variables be reassigned, and the | |
| dnl conditional will depend on the final state of the variable. For a simple | |
| dnl example of why this is needed, see GLIBCXX_ENABLE_HOSTED. | |
| dnl | |
| m4_define([_m4_divert(glibcxx_diversion)], 8000)dnl | |
| AC_DEFUN([GLIBCXX_CONDITIONAL], [dnl | |
| m4_divert_text([glibcxx_diversion],dnl | |
| AM_CONDITIONAL([$1],[$2]) | |
| )dnl | |
| ])dnl | |
| AC_DEFUN([GLIBCXX_EVALUATE_CONDITIONALS], [m4_undivert([glibcxx_diversion])])dnl | |
| dnl | |
| dnl Check to see what architecture and operating system we are compiling | |
| dnl for. Also, if architecture- or OS-specific flags are required for | |
| dnl compilation, pick them up here. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_HOST], [ | |
| . $glibcxx_srcdir/configure.host | |
| AC_MSG_NOTICE([CPU config directory is $cpu_include_dir]) | |
| AC_MSG_NOTICE([OS config directory is $os_include_dir]) | |
| ]) | |
| dnl | |
| dnl Initialize the rest of the library configury. At this point we have | |
| dnl variables like $host. | |
| dnl | |
| dnl Sets: | |
| dnl SUBDIRS | |
| dnl Substs: | |
| dnl glibcxx_builddir (absolute path) | |
| dnl glibcxx_srcdir (absolute path) | |
| dnl toplevel_builddir (absolute path) | |
| dnl toplevel_srcdir (absolute path) | |
| dnl with_cross_host | |
| dnl with_newlib | |
| dnl with_target_subdir | |
| dnl plus | |
| dnl - the variables in GLIBCXX_CHECK_HOST / configure.host | |
| dnl - default settings for all AM_CONFITIONAL test variables | |
| dnl - lots of tools, like CC and CXX | |
| dnl | |
| AC_DEFUN([GLIBCXX_CONFIGURE], [ | |
| # Keep these sync'd with the list in Makefile.am. The first provides an | |
| # expandable list at autoconf time; the second provides an expandable list | |
| # (i.e., shell variable) at configure time. | |
| m4_define([glibcxx_SUBDIRS],[include libsupc++ src src/c++98 src/c++11 src/c++17 src/c++20 src/c++23 src/c++26 src/filesystem src/libbacktrace src/experimental doc po testsuite python]) | |
| SUBDIRS='glibcxx_SUBDIRS' | |
| # These need to be absolute paths, yet at the same time need to | |
| # canonicalize only relative paths, because then amd will not unmount | |
| # drives. Thus the use of PWDCMD: set it to 'pawd' or 'amq -w' if using amd. | |
| glibcxx_builddir=`${PWDCMD-pwd}` | |
| case $srcdir in | |
| [\\/$]* | ?:[\\/]*) glibcxx_srcdir=${srcdir} ;; | |
| *) glibcxx_srcdir=`cd "$srcdir" && ${PWDCMD-pwd} || echo "$srcdir"` ;; | |
| esac | |
| toplevel_builddir=${glibcxx_builddir}/.. | |
| toplevel_srcdir=${glibcxx_srcdir}/.. | |
| AC_SUBST(glibcxx_builddir) | |
| AC_SUBST(glibcxx_srcdir) | |
| AC_SUBST(toplevel_builddir) | |
| AC_SUBST(toplevel_srcdir) | |
| # We use these options to decide which functions to include. They are | |
| # set from the top level. | |
| AC_ARG_WITH([target-subdir], | |
| AC_HELP_STRING([--with-target-subdir=SUBDIR], | |
| [configuring in a subdirectory])) | |
| AC_ARG_WITH([cross-host], | |
| AC_HELP_STRING([--with-cross-host=HOST], | |
| [configuring with a cross compiler])) | |
| AC_ARG_WITH([newlib], | |
| AC_HELP_STRING([--with-newlib], | |
| [assume newlib as a system C library])) | |
| # Will set LN_S to either 'ln -s', 'ln', or 'cp -p' (if linking isn't | |
| # available). Uncomment the next line to force a particular method. | |
| AC_PROG_LN_S | |
| #LN_S='cp -p' | |
| AC_CHECK_TOOL(AS, as) | |
| AC_CHECK_TOOL(AR, ar) | |
| AC_CHECK_TOOL(RANLIB, ranlib, ranlib-not-found-in-path-error) | |
| AM_MAINTAINER_MODE | |
| # Set up safe default values for all subsequent AM_CONDITIONAL tests | |
| # which are themselves conditionally expanded. | |
| ## (Right now, this only matters for enable_wchar_t, but nothing prevents | |
| ## other macros from doing the same. This should be automated.) -pme | |
| # Check for C library flavor since GNU/Linux platforms use different | |
| # configuration directories depending on the C library in use. | |
| AC_EGREP_CPP([_using_uclibc], [ | |
| #include <stdio.h> | |
| #if __UCLIBC__ | |
| _using_uclibc | |
| #endif | |
| ], uclibc=yes, uclibc=no) | |
| AC_EGREP_CPP([_using_bionic], [ | |
| #include <stdio.h> | |
| #if __BIONIC__ | |
| _using_bionic | |
| #endif | |
| ], bionic=yes, bionic=no) | |
| # Find platform-specific directories containing configuration info. | |
| # Also possibly modify flags used elsewhere, as needed by the platform. | |
| GLIBCXX_CHECK_HOST | |
| ]) | |
| dnl | |
| dnl Tests for newer compiler features, or features that are present in newer | |
| dnl compiler versions but not older compiler versions still in use, should | |
| dnl be placed here. | |
| dnl | |
| dnl Defines: | |
| dnl WERROR='-Werror' if requested and possible; g++'s that lack the | |
| dnl new inlining code or the new system_header pragma will die on -Werror. | |
| dnl Leave it out by default and use maint-mode to use it. | |
| dnl SECTION_FLAGS='-ffunction-sections -fdata-sections' if | |
| dnl compiler supports it and the user has not requested debug mode. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_COMPILER_FEATURES], [ | |
| # All these tests are for C++; save the language and the compiler flags. | |
| # The CXXFLAGS thing is suspicious, but based on similar bits previously | |
| # found in GLIBCXX_CONFIGURE. | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_test_CXXFLAGS="${CXXFLAGS+set}" | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| # Check for -ffunction-sections -fdata-sections | |
| AC_MSG_CHECKING([for g++ that supports -ffunction-sections -fdata-sections]) | |
| CXXFLAGS='-g -Werror -ffunction-sections -fdata-sections' | |
| AC_TRY_COMPILE([int foo; void bar() { };],, [ac_fdsections=yes], [ac_fdsections=no]) | |
| if test "$ac_test_CXXFLAGS" = set; then | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| else | |
| # this is the suspicious part | |
| CXXFLAGS='' | |
| fi | |
| if test x"$ac_fdsections" = x"yes"; then | |
| SECTION_FLAGS='-ffunction-sections -fdata-sections' | |
| fi | |
| AC_MSG_RESULT($ac_fdsections) | |
| AC_LANG_RESTORE | |
| AC_SUBST(SECTION_FLAGS) | |
| ]) | |
| dnl | |
| dnl If GNU ld is in use, check to see if tricky linker opts can be used. If | |
| dnl the native linker is in use, all variables will be defined to something | |
| dnl safe (like an empty string). | |
| dnl | |
| dnl Defines: | |
| dnl SECTION_LDFLAGS='-Wl,--gc-sections' if possible | |
| dnl OPT_LDFLAGS='-Wl,-O1' and '-z,relro' if possible | |
| dnl LD (as a side effect of testing) | |
| dnl Sets: | |
| dnl with_gnu_ld | |
| dnl glibcxx_ld_is_gold (set to "no" or "yes") | |
| dnl glibcxx_ld_is_mold (set to "no" or "yes") | |
| dnl glibcxx_gnu_ld_version (possibly) | |
| dnl | |
| dnl The last will be a single integer, e.g., version 1.23.45.0.67.89 will | |
| dnl set glibcxx_gnu_ld_version to 12345. Zeros cause problems. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_LINKER_FEATURES], [ | |
| # If we're not using GNU ld, then there's no point in even trying these | |
| # tests. Check for that first. We should have already tested for gld | |
| # by now (in libtool), but require it now just to be safe... | |
| test -z "$SECTION_LDFLAGS" && SECTION_LDFLAGS='' | |
| test -z "$OPT_LDFLAGS" && OPT_LDFLAGS='' | |
| AC_REQUIRE([AC_PROG_LD]) | |
| AC_REQUIRE([AC_PROG_AWK]) | |
| # The name set by libtool depends on the version of libtool. Shame on us | |
| # for depending on an impl detail, but c'est la vie. Older versions used | |
| # ac_cv_prog_gnu_ld, but now it's lt_cv_prog_gnu_ld, and is copied back on | |
| # top of with_gnu_ld (which is also set by --with-gnu-ld, so that actually | |
| # makes sense). We'll test with_gnu_ld everywhere else, so if that isn't | |
| # set (hence we're using an older libtool), then set it. | |
| if test x${with_gnu_ld+set} != xset; then | |
| if test x${ac_cv_prog_gnu_ld+set} != xset; then | |
| # We got through "ac_require(ac_prog_ld)" and still not set? Huh? | |
| with_gnu_ld=no | |
| else | |
| with_gnu_ld=$ac_cv_prog_gnu_ld | |
| fi | |
| fi | |
| # Start by getting the version number. I think the libtool test already | |
| # does some of this, but throws away the result. | |
| glibcxx_ld_is_gold=no | |
| glibcxx_ld_is_mold=no | |
| if test x"$with_gnu_ld" = x"yes"; then | |
| AC_MSG_CHECKING([for ld version]) | |
| changequote(,) | |
| if $LD --version 2>/dev/null | grep 'GNU gold' >/dev/null 2>&1; then | |
| glibcxx_ld_is_gold=yes | |
| elif $LD --version 2>/dev/null | grep 'mold' >/dev/null 2>&1; then | |
| glibcxx_ld_is_mold=yes | |
| fi | |
| ldver=`$LD --version 2>/dev/null | | |
| sed -e 's/[. ][0-9]\{8\}$//;s/.* \([^ ]\{1,\}\)$/\1/; q'` | |
| changequote([,]) | |
| glibcxx_gnu_ld_version=`echo $ldver | \ | |
| $AWK -F. '{ if (NF<3) [$]3=0; print ([$]1*100+[$]2)*100+[$]3 }'` | |
| AC_MSG_RESULT($glibcxx_gnu_ld_version) | |
| fi | |
| # Set --gc-sections. | |
| glibcxx_have_gc_sections=no | |
| if test "$glibcxx_ld_is_gold" = "yes" || test "$glibcxx_ld_is_mold" = "yes" ; then | |
| if $LD --help 2>/dev/null | grep gc-sections >/dev/null 2>&1; then | |
| glibcxx_have_gc_sections=yes | |
| fi | |
| else | |
| glibcxx_gcsections_min_ld=21602 | |
| if test x"$with_gnu_ld" = x"yes" && | |
| test $glibcxx_gnu_ld_version -gt $glibcxx_gcsections_min_ld ; then | |
| glibcxx_have_gc_sections=yes | |
| fi | |
| fi | |
| if test "$glibcxx_have_gc_sections" = "yes"; then | |
| # Sufficiently young GNU ld it is! Joy and bunny rabbits! | |
| # NB: This flag only works reliably after 2.16.1. Configure tests | |
| # for this are difficult, so hard wire a value that should work. | |
| ac_test_CFLAGS="${CFLAGS+set}" | |
| ac_save_CFLAGS="$CFLAGS" | |
| CFLAGS='-Wl,--gc-sections' | |
| # Check for -Wl,--gc-sections | |
| AC_MSG_CHECKING([for ld that supports -Wl,--gc-sections]) | |
| AC_TRY_LINK([ int one(void) { return 1; } | |
| int two(void) { return 2; } | |
| ], [ two(); ] , [ac_gcsections=yes], [ac_gcsections=no]) | |
| if test "$ac_gcsections" = "yes"; then | |
| rm -f conftest.c | |
| touch conftest.c | |
| if $CC -c conftest.c; then | |
| if $LD --gc-sections -o conftest conftest.o 2>&1 | \ | |
| grep "Warning: gc-sections option ignored" > /dev/null; then | |
| ac_gcsections=no | |
| fi | |
| fi | |
| rm -f conftest.c conftest.o conftest | |
| fi | |
| if test "$ac_gcsections" = "yes"; then | |
| SECTION_LDFLAGS="-Wl,--gc-sections $SECTION_LDFLAGS" | |
| fi | |
| AC_MSG_RESULT($ac_gcsections) | |
| if test "$ac_test_CFLAGS" = set; then | |
| CFLAGS="$ac_save_CFLAGS" | |
| else | |
| # this is the suspicious part | |
| CFLAGS='' | |
| fi | |
| fi | |
| # Set -z,relro. | |
| # Note this is only for shared objects. | |
| ac_ld_relro=no | |
| if test x"$with_gnu_ld" = x"yes"; then | |
| # cygwin and mingw uses PE, which has no ELF relro support, | |
| # multi target ld may confuse configure machinery | |
| case "$host" in | |
| *-*-cygwin*) | |
| ;; | |
| *-*-mingw*) | |
| ;; | |
| *) | |
| AC_MSG_CHECKING([for ld that supports -Wl,-z,relro]) | |
| cxx_z_relo=`$LD -v --help 2>/dev/null | grep "z relro"` | |
| if test -n "$cxx_z_relo"; then | |
| OPT_LDFLAGS="-Wl,-z,relro" | |
| ac_ld_relro=yes | |
| fi | |
| AC_MSG_RESULT($ac_ld_relro) | |
| esac | |
| fi | |
| # Set linker optimization flags. | |
| if test x"$with_gnu_ld" = x"yes"; then | |
| OPT_LDFLAGS="-Wl,-O1 $OPT_LDFLAGS" | |
| fi | |
| AC_SUBST(SECTION_LDFLAGS) | |
| AC_SUBST(OPT_LDFLAGS) | |
| ]) | |
| dnl | |
| dnl Check for headers for, and arguments to, the setrlimit() function. | |
| dnl Used only in testsuite_hooks.h. Called from GLIBCXX_CONFIGURE_TESTSUITE. | |
| dnl | |
| dnl Defines: | |
| dnl _GLIBCXX_RES_LIMITS if we can set artificial resource limits | |
| dnl various HAVE_LIMIT_* for individual limit names | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_SETRLIMIT_ancilliary], [ | |
| AC_MSG_CHECKING([for RLIMIT_$1]) | |
| AC_TRY_COMPILE( | |
| [#include <unistd.h> | |
| #include <sys/time.h> | |
| #include <sys/resource.h> | |
| ], | |
| [ int f = RLIMIT_$1 ; ], | |
| [glibcxx_mresult=1], [glibcxx_mresult=0]) | |
| AC_DEFINE_UNQUOTED(HAVE_LIMIT_$1, $glibcxx_mresult, | |
| [Only used in build directory testsuite_hooks.h.]) | |
| if test $glibcxx_mresult = 1 ; then res=yes ; else res=no ; fi | |
| AC_MSG_RESULT($res) | |
| ]) | |
| AC_DEFUN([GLIBCXX_CHECK_SETRLIMIT], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| setrlimit_have_headers=yes | |
| AC_CHECK_HEADERS(unistd.h sys/time.h sys/resource.h, | |
| [], | |
| [setrlimit_have_headers=no]) | |
| # If don't have the headers, then we can't run the tests now, and we | |
| # won't be seeing any of these during testsuite compilation. | |
| if test $setrlimit_have_headers = yes; then | |
| # Can't do these in a loop, else the resulting syntax is wrong. | |
| GLIBCXX_CHECK_SETRLIMIT_ancilliary(DATA) | |
| GLIBCXX_CHECK_SETRLIMIT_ancilliary(RSS) | |
| GLIBCXX_CHECK_SETRLIMIT_ancilliary(VMEM) | |
| GLIBCXX_CHECK_SETRLIMIT_ancilliary(AS) | |
| GLIBCXX_CHECK_SETRLIMIT_ancilliary(FSIZE) | |
| # Check for rlimit, setrlimit. | |
| AC_CACHE_CHECK([for testsuite resource limits support], | |
| glibcxx_cv_setrlimit, [ | |
| AC_TRY_COMPILE( | |
| [#include <unistd.h> | |
| #include <sys/time.h> | |
| #include <sys/resource.h> | |
| ], | |
| [struct rlimit r; | |
| setrlimit(0, &r);], | |
| [glibcxx_cv_setrlimit=yes], [glibcxx_cv_setrlimit=no]) | |
| ]) | |
| if test $glibcxx_cv_setrlimit = yes; then | |
| AC_DEFINE(_GLIBCXX_RES_LIMITS, 1, | |
| [Define if using setrlimit to set resource limits during | |
| "make check"]) | |
| fi | |
| fi | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether S_ISREG (Posix) or S_IFREG is available in <sys/stat.h>. | |
| dnl Define HAVE_S_ISREG / HAVE_S_IFREG appropriately. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_S_ISREG_OR_S_IFREG], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| AC_MSG_CHECKING([for S_ISREG or S_IFREG]) | |
| AC_CACHE_VAL(glibcxx_cv_S_ISREG, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <sys/stat.h>], | |
| [struct stat buffer; | |
| fstat(0, &buffer); | |
| S_ISREG(buffer.st_mode);], | |
| [glibcxx_cv_S_ISREG=yes], | |
| [glibcxx_cv_S_ISREG=no]) | |
| ]) | |
| AC_CACHE_VAL(glibcxx_cv_S_IFREG, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <sys/stat.h>], | |
| [struct stat buffer; | |
| fstat(0, &buffer); | |
| S_IFREG & buffer.st_mode;], | |
| [glibcxx_cv_S_IFREG=yes], | |
| [glibcxx_cv_S_IFREG=no]) | |
| ]) | |
| res=no | |
| if test $glibcxx_cv_S_ISREG = yes; then | |
| AC_DEFINE(HAVE_S_ISREG, 1, | |
| [Define if S_ISREG is available in <sys/stat.h>.]) | |
| res=S_ISREG | |
| elif test $glibcxx_cv_S_IFREG = yes; then | |
| AC_DEFINE(HAVE_S_IFREG, 1, | |
| [Define if S_IFREG is available in <sys/stat.h>.]) | |
| res=S_IFREG | |
| fi | |
| AC_MSG_RESULT($res) | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether poll is available in <poll.h>, and define HAVE_POLL. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_POLL], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| AC_CACHE_CHECK([for poll], glibcxx_cv_POLL, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <poll.h>], | |
| [struct pollfd pfd[1]; | |
| pfd[0].events = POLLIN; | |
| poll(pfd, 1, 0);], | |
| [glibcxx_cv_POLL=yes], | |
| [glibcxx_cv_POLL=no]) | |
| ]) | |
| if test $glibcxx_cv_POLL = yes; then | |
| AC_DEFINE(HAVE_POLL, 1, [Define if poll is available in <poll.h>.]) | |
| fi | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether writev is available in <sys/uio.h>, and define HAVE_WRITEV. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_WRITEV], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| AC_CACHE_CHECK([for writev], glibcxx_cv_WRITEV, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <sys/uio.h>], | |
| [struct iovec iov[2]; | |
| writev(0, iov, 0);], | |
| [glibcxx_cv_WRITEV=yes], | |
| [glibcxx_cv_WRITEV=no]) | |
| ]) | |
| if test $glibcxx_cv_WRITEV = yes; then | |
| AC_DEFINE(HAVE_WRITEV, 1, [Define if writev is available in <sys/uio.h>.]) | |
| fi | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether LFS support is available. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_LFS], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| AC_CACHE_CHECK([for LFS support], glibcxx_cv_LFS, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <unistd.h> | |
| #include <stdio.h> | |
| #include <sys/stat.h> | |
| ], | |
| [FILE* fp; | |
| fopen64("t", "w"); | |
| fseeko64(fp, 0, SEEK_CUR); | |
| ftello64(fp); | |
| lseek64(1, 0, SEEK_CUR); | |
| struct stat64 buf; | |
| fstat64(1, &buf);], | |
| [glibcxx_cv_LFS=yes], | |
| [glibcxx_cv_LFS=no]) | |
| ]) | |
| if test $glibcxx_cv_LFS = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_LFS, 1, [Define if LFS support is available.]) | |
| fi | |
| AC_CACHE_CHECK([for fseeko and ftello], glibcxx_cv_posix_lfs, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <stdio.h> | |
| ], | |
| [FILE* fp; | |
| fseeko(fp, 0, SEEK_CUR); | |
| ftello(fp); | |
| ], | |
| [glibcxx_cv_posix_lfs=yes], | |
| [glibcxx_cv_posix_lfs=no]) | |
| ]) | |
| if test $glibcxx_cv_posix_lfs = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_FSEEKO_FTELLO, 1, [Define if fseeko and ftello are available.]) | |
| fi | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether the old Copy-On-Write basic_string should allocate a new | |
| dnl empty representation for every default-constructed basic_string. Without | |
| dnl this option, COW strings share a single empty rep in static storage, | |
| dnl but this only works if the linker can guarantee the static storage has | |
| dnl a unique definition in the process. It also doesn't work if basic_string | |
| dnl objects are stored in shared memory (see PR libstdc++/16612). | |
| dnl When fully dynamic strings are enabled, the static storage is not used | |
| dnl and a new empty string with reference-count == 1 is allocated each time. | |
| dnl Enabling this changes the libstdc++.so ABI. | |
| dnl | |
| dnl --enable-fully-dynamic-string defines _GLIBCXX_FULLY_DYNAMIC_STRING to 1 | |
| dnl --disable-fully-dynamic-string defines _GLIBCXX_FULLY_DYNAMIC_STRING to 0 | |
| dnl otherwise the macro is not defined. | |
| dnl + Usage: GLIBCXX_ENABLE_FULLY_DYNAMIC_STRING[(DEFAULT)] | |
| dnl Where DEFAULT is either `yes' or `no'. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_FULLY_DYNAMIC_STRING], [ | |
| GLIBCXX_ENABLE(fully-dynamic-string,$1,,[do not put empty strings in per-process static memory], [permit yes|no]) | |
| if test $enable_fully_dynamic_string = yes; then | |
| enable_fully_dynamic_string_def=1 | |
| else | |
| enable_fully_dynamic_string_def=0 | |
| fi | |
| AC_DEFINE_UNQUOTED([_GLIBCXX_FULLY_DYNAMIC_STRING], [${enable_fully_dynamic_string_def}], | |
| [Define to 1 if a fully dynamic basic_string is wanted, 0 to disable, undefined for platform defaults]) | |
| ]) | |
| dnl | |
| dnl Does any necessary configuration of the testsuite directory. Generates | |
| dnl the testsuite_hooks.h header. | |
| dnl | |
| dnl GLIBCXX_ENABLE_SYMVERS and GLIBCXX_IS_NATIVE must be done before this. | |
| dnl | |
| dnl Sets: | |
| dnl enable_abi_check | |
| dnl GLIBCXX_TEST_WCHAR_T | |
| dnl GLIBCXX_TEST_THREAD | |
| dnl Substs: | |
| dnl baseline_dir | |
| dnl baseline_subdir_switch | |
| dnl | |
| AC_DEFUN([GLIBCXX_CONFIGURE_TESTSUITE], [ | |
| # Do checks for resource limit functions. | |
| GLIBCXX_CHECK_SETRLIMIT | |
| if $GLIBCXX_IS_NATIVE ; then | |
| # Look for setenv, so that extended locale tests can be performed. | |
| GLIBCXX_CHECK_STDLIB_DECL_AND_LINKAGE_3(setenv) | |
| fi | |
| if $GLIBCXX_IS_NATIVE && test $is_hosted = yes && | |
| test $enable_symvers != no; then | |
| case "$host" in | |
| *-*-cygwin*) | |
| enable_abi_check=no ;; | |
| *) | |
| enable_abi_check=yes ;; | |
| esac | |
| else | |
| # Only build this as native, since automake does not understand | |
| # CXX_FOR_BUILD. | |
| enable_abi_check=no | |
| fi | |
| # Export file names for ABI checking. | |
| baseline_dir="$glibcxx_srcdir/config/abi/post/${abi_baseline_pair}" | |
| AC_SUBST(baseline_dir) | |
| baseline_subdir_switch="$abi_baseline_subdir_switch" | |
| AC_SUBST(baseline_subdir_switch) | |
| ]) | |
| dnl | |
| dnl Does any necessary configuration for docbook in the docs directory. | |
| dnl | |
| dnl XSLTPROC must be set before this | |
| dnl | |
| dnl Sets: | |
| dnl glibcxx_stylesheets | |
| dnl Substs: | |
| dnl XSL_STYLE_DIR | |
| dnl | |
| AC_DEFUN([GLIBCXX_CONFIGURE_DOCBOOK], [ | |
| glibcxx_docbook_url=http://cdn.docbook.org/release/xsl/current/ | |
| AC_MSG_CHECKING([for local stylesheet directory]) | |
| glibcxx_local_stylesheets=no | |
| if test x${XMLCATALOG} = xyes && xsl_style_dir=`xmlcatalog "" $glibcxx_docbook_url 2>/dev/null` | |
| then | |
| XSL_STYLE_DIR=`echo $xsl_style_dir | sed -n 's;^file://;;p'` | |
| glibcxx_local_stylesheets=yes | |
| else | |
| for dir in \ | |
| /usr/share/sgml/docbook/xsl-ns-stylesheets \ | |
| /usr/share/xml/docbook/stylesheet/docbook-xsl-ns \ | |
| /usr/share/xml/docbook/stylesheet/nwalsh5/current \ | |
| /usr/share/xml/docbook/stylesheet/nwalsh/current | |
| do | |
| if test -d $dir; then | |
| glibcxx_local_stylesheets=yes | |
| XSL_STYLE_DIR=$dir | |
| break | |
| fi | |
| done | |
| fi | |
| AC_MSG_RESULT($glibcxx_local_stylesheets) | |
| if test x"$glibcxx_local_stylesheets" = x"yes"; then | |
| AC_SUBST(XSL_STYLE_DIR) | |
| AC_MSG_NOTICE($XSL_STYLE_DIR) | |
| AC_MSG_CHECKING([for docbook stylesheets for documentation creation]) | |
| glibcxx_stylesheets=no | |
| if test x${XMLCATALOG} = xno || xmlcatalog "" $glibcxx_docbook_url/xhtml/docbook.xsl >/dev/null 2>&1; then | |
| if test x${XSLTPROC} = xyes && echo '<title/>' | xsltproc --noout --nonet --xinclude $glibcxx_docbook_url/xhtml/docbook.xsl - 2>/dev/null; then | |
| glibcxx_stylesheets=yes | |
| fi | |
| fi | |
| AC_MSG_RESULT($glibcxx_stylesheets) | |
| else | |
| glibcxx_stylesheets=no | |
| fi | |
| # Check for epub3 dependencies. | |
| AC_MSG_CHECKING([for epub3 stylesheets for documentation creation]) | |
| glibcxx_epub_stylesheets=no | |
| if test x"$glibcxx_local_stylesheets" = x"yes"; then | |
| if test -f "$XSL_STYLE_DIR/epub3/chunk.xsl"; then | |
| glibcxx_epub_stylesheets=yes | |
| fi | |
| fi | |
| AC_MSG_RESULT($glibcxx_epub_stylesheets) | |
| AM_CONDITIONAL(BUILD_EPUB, test x"$glibcxx_epub_stylesheets" = x"yes") | |
| ]) | |
| dnl | |
| dnl Set up *_INCLUDES variables for all sundry Makefile.am's. | |
| dnl | |
| dnl Substs: | |
| dnl GLIBCXX_INCLUDES | |
| dnl TOPLEVEL_INCLUDES | |
| dnl | |
| AC_DEFUN([GLIBCXX_EXPORT_INCLUDES], [ | |
| # Used for every C++ compile we perform. | |
| GLIBCXX_INCLUDES="\ | |
| -I$glibcxx_builddir/include/$host_alias \ | |
| -I$glibcxx_builddir/include \ | |
| -I$glibcxx_srcdir/libsupc++" | |
| # For Canadian crosses, pick this up too. | |
| if test $CANADIAN = yes; then | |
| GLIBCXX_INCLUDES="$GLIBCXX_INCLUDES -I\${includedir}" | |
| fi | |
| # Stuff in the actual top level. Currently only used by libsupc++ to | |
| # get unwind* headers from the libgcc dir. | |
| #TOPLEVEL_INCLUDES='-I$(toplevel_srcdir)/libgcc -I$(toplevel_srcdir)/include' | |
| TOPLEVEL_INCLUDES='-I$(toplevel_srcdir)/libgcc' | |
| # Now, export this to all the little Makefiles.... | |
| AC_SUBST(GLIBCXX_INCLUDES) | |
| AC_SUBST(TOPLEVEL_INCLUDES) | |
| ]) | |
| dnl | |
| dnl Set up *_FLAGS and *FLAGS variables for all sundry Makefile.am's. | |
| dnl (SECTION_FLAGS is done under CHECK_COMPILER_FEATURES.) | |
| dnl | |
| dnl Substs: | |
| dnl CPPFLAGS | |
| dnl OPTIMIZE_CXXFLAGS | |
| dnl WARN_FLAGS | |
| dnl | |
| AC_DEFUN([GLIBCXX_EXPORT_FLAGS], [ | |
| AC_SUBST(CPPFLAGS) | |
| # Optimization flags that are probably a good idea for thrill-seekers. Just | |
| # uncomment the lines below and make, everything else is ready to go... | |
| # Alternatively OPTIMIZE_CXXFLAGS can be set in configure.host. | |
| # OPTIMIZE_CXXFLAGS = -O3 -fstrict-aliasing -fvtable-gc | |
| AC_SUBST(OPTIMIZE_CXXFLAGS) | |
| WARN_FLAGS="-Wall -Wextra -Wwrite-strings -Wcast-qual -Wabi=19" | |
| AC_SUBST(WARN_FLAGS) | |
| ]) | |
| dnl | |
| dnl All installation directory information is determined here. | |
| dnl | |
| dnl Substs: | |
| dnl gxx_install_dir | |
| dnl glibcxx_prefixdir | |
| dnl glibcxx_toolexecdir | |
| dnl glibcxx_toolexeclibdir | |
| dnl | |
| dnl Assumes cross_compiling bits already done, and with_cross_host in | |
| dnl particular. | |
| dnl | |
| dnl This logic must match gcc/configure.ac's setting of gcc_gxx_include_dir. | |
| dnl config/gxx-include-dir.m4 must be kept consistant with this as well. | |
| AC_DEFUN([GLIBCXX_EXPORT_INSTALL_INFO], [ | |
| glibcxx_toolexecdir=no | |
| glibcxx_toolexeclibdir=no | |
| glibcxx_prefixdir=$prefix | |
| AC_MSG_CHECKING([for gxx-include-dir]) | |
| AC_ARG_WITH([gxx-include-dir], | |
| AC_HELP_STRING([--with-gxx-include-dir=DIR], | |
| [installation directory for include files]), | |
| [case "$withval" in | |
| yes) AC_MSG_ERROR([Missing directory for --with-gxx-include-dir]) ;; | |
| no) gxx_include_dir=no ;; | |
| *) gxx_include_dir=$withval ;; | |
| esac], | |
| [gxx_include_dir=no]) | |
| AC_MSG_RESULT($gxx_include_dir) | |
| AC_MSG_CHECKING([for --enable-version-specific-runtime-libs]) | |
| AC_ARG_ENABLE([version-specific-runtime-libs], | |
| AC_HELP_STRING([--enable-version-specific-runtime-libs], | |
| [Specify that runtime libraries should be installed in a compiler-specific directory]), | |
| [case "$enableval" in | |
| yes) version_specific_libs=yes ;; | |
| no) version_specific_libs=no ;; | |
| *) AC_MSG_ERROR([Unknown argument to enable/disable version-specific libs]);; | |
| esac], | |
| [version_specific_libs=no]) | |
| AC_MSG_RESULT($version_specific_libs) | |
| GCC_WITH_TOOLEXECLIBDIR | |
| # Default case for install directory for include files. | |
| if test $version_specific_libs = no && test $gxx_include_dir = no; then | |
| gxx_include_dir='include/c++/${gcc_version}' | |
| if test -n "$with_cross_host" && | |
| test x"$with_cross_host" != x"no"; then | |
| gxx_include_dir='${prefix}/${target_alias}/'"$gxx_include_dir" | |
| else | |
| gxx_include_dir='${prefix}/'"$gxx_include_dir" | |
| fi | |
| fi | |
| # Version-specific runtime libs processing. | |
| if test $version_specific_libs = yes; then | |
| # Need the gcc compiler version to know where to install libraries | |
| # and header files if --enable-version-specific-runtime-libs option | |
| # is selected. FIXME: these variables are misnamed, there are | |
| # no executables installed in _toolexecdir or _toolexeclibdir. | |
| if test x"$gxx_include_dir" = x"no"; then | |
| gxx_include_dir='${libdir}/gcc/${host_alias}/${gcc_version}/include/c++' | |
| fi | |
| glibcxx_toolexecdir='${libdir}/gcc/${host_alias}' | |
| glibcxx_toolexeclibdir='${toolexecdir}/${gcc_version}$(MULTISUBDIR)' | |
| fi | |
| # Calculate glibcxx_toolexecdir, glibcxx_toolexeclibdir | |
| # Install a library built with a cross compiler in tooldir, not libdir. | |
| if test x"$glibcxx_toolexecdir" = x"no"; then | |
| if test -n "$with_cross_host" && | |
| test x"$with_cross_host" != x"no"; then | |
| glibcxx_toolexecdir='${exec_prefix}/${host_alias}' | |
| case ${with_toolexeclibdir} in | |
| no) | |
| glibcxx_toolexeclibdir='${toolexecdir}/lib' | |
| ;; | |
| *) | |
| glibcxx_toolexeclibdir=${with_toolexeclibdir} | |
| ;; | |
| esac | |
| else | |
| glibcxx_toolexecdir='${libdir}/gcc/${host_alias}' | |
| glibcxx_toolexeclibdir='${libdir}' | |
| fi | |
| multi_os_directory=`$CXX -print-multi-os-directory` | |
| case $multi_os_directory in | |
| .) ;; # Avoid trailing /. | |
| *) glibcxx_toolexeclibdir=$glibcxx_toolexeclibdir/$multi_os_directory ;; | |
| esac | |
| fi | |
| AC_MSG_CHECKING([for install location]) | |
| AC_MSG_RESULT($gxx_include_dir) | |
| AC_SUBST(glibcxx_prefixdir) | |
| AC_SUBST(gxx_include_dir) | |
| AC_SUBST(glibcxx_toolexecdir) | |
| AC_SUBST(glibcxx_toolexeclibdir) | |
| ]) | |
| dnl | |
| dnl GLIBCXX_ENABLE | |
| dnl (FEATURE, DEFAULT, HELP-ARG, HELP-STRING) | |
| dnl (FEATURE, DEFAULT, HELP-ARG, HELP-STRING, permit a|b|c) | |
| dnl (FEATURE, DEFAULT, HELP-ARG, HELP-STRING, SHELL-CODE-HANDLER) | |
| dnl | |
| dnl See manual/appendix_porting.html#appendix.porting.build_hacking for | |
| dnl documentation. | |
| dnl | |
| m4_define([GLIBCXX_ENABLE],[dnl | |
| m4_define([_g_switch],[--enable-$1])dnl | |
| m4_define([_g_help],[AC_HELP_STRING([_g_switch$3],[$4 @<:@default=$2@:>@])])dnl | |
| AC_ARG_ENABLE([$1],m4_dquote(_g_help), | |
| m4_bmatch([$5], | |
| [^permit ], | |
| [[ | |
| case "$enableval" in | |
| m4_bpatsubst([$5],[permit ])) ;; | |
| *) AC_MSG_ERROR(Unknown argument to enable/disable $1) ;; | |
| dnl Idea for future: generate a URL pointing to | |
| dnl "onlinedocs/configopts.html#whatever" | |
| esac | |
| ]], | |
| [^$], | |
| [[ | |
| case "$enableval" in | |
| yes|no) ;; | |
| *) AC_MSG_ERROR(Argument to enable/disable $1 must be yes or no) ;; | |
| esac | |
| ]], | |
| [[$5]]), | |
| [enable_]m4_bpatsubst([$1],-,_)[=][$2]) | |
| m4_undefine([_g_switch])dnl | |
| m4_undefine([_g_help])dnl | |
| ]) | |
| dnl | |
| dnl Check for ISO/IEC 9899:1999 "C99" support. | |
| dnl | |
| dnl --enable-c99 defines _GLIBCXX_USE_C99 | |
| dnl --disable-c99 leaves _GLIBCXX_USE_C99 undefined | |
| dnl + Usage: GLIBCXX_ENABLE_C99[(DEFAULT)] | |
| dnl Where DEFAULT is either `yes' or `no'. | |
| dnl + If 'C99' stuff is not available, ignores DEFAULT and sets `no'. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_C99], [ | |
| GLIBCXX_ENABLE(c99,$1,,[turns on ISO/IEC 9899:1999 support]) | |
| if test x"$enable_c99" = x"yes"; then | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| # Use -std=c++98 (instead of -std=gnu++98) because leaving __STRICT_ANSI__ | |
| # undefined may cause fake C99 facilities, like pre-standard snprintf, | |
| # to be spuriously enabled. | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -std=c++98" | |
| ac_save_LIBS="$LIBS" | |
| ac_save_gcc_no_link="$gcc_no_link" | |
| if test x$gcc_no_link != xyes; then | |
| # Use -fno-exceptions to that the C driver can link these tests without | |
| # hitting undefined references to personality routines. | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| AC_CHECK_LIB(m, sin, [LIBS="$LIBS -lm"], [ | |
| # Use the default compile-only tests in GCC_TRY_COMPILE_OR_LINK | |
| gcc_no_link=yes | |
| ]) | |
| fi | |
| # Check for the existence of <math.h> functions used if C99 is enabled. | |
| AC_CACHE_CHECK([for ISO C99 support in <math.h> for C++98], | |
| glibcxx_cv_c99_math_cxx98, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <math.h> | |
| volatile double d1, d2; | |
| volatile int i;], | |
| [i = fpclassify(d1); | |
| i = isfinite(d1); | |
| i = isinf(d1); | |
| i = isnan(d1); | |
| i = isnormal(d1); | |
| i = signbit(d1); | |
| i = isgreater(d1, d2); | |
| i = isgreaterequal(d1, d2); | |
| i = isless(d1, d2); | |
| i = islessequal(d1, d2); | |
| i = islessgreater(d1, d2); | |
| i = islessgreater(d1, d2); | |
| i = isunordered(d1, d2); | |
| ], [glibcxx_cv_c99_math_cxx98=yes], [glibcxx_cv_c99_math_cxx98=no]) | |
| ]) | |
| if test x"$glibcxx_cv_c99_math_cxx98" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX98_USE_C99_MATH, 1, | |
| [Define if C99 functions or macros in <math.h> should be imported | |
| in <cmath> in namespace std for C++98.]) | |
| fi | |
| # Check for the existence of <complex.h> complex math functions. | |
| # This is necessary even though libstdc++ uses the builtin versions | |
| # of these functions, because if the builtin cannot be used, a reference | |
| # to the library function is emitted. | |
| AC_CHECK_HEADERS(tgmath.h, ac_has_tgmath_h=yes, ac_has_tgmath_h=no) | |
| AC_CHECK_HEADERS(complex.h, ac_has_complex_h=yes, ac_has_complex_h=no) | |
| if test x"$ac_has_complex_h" = x"yes"; then | |
| AC_CACHE_CHECK([for ISO C99 support in <complex.h> for C++98], | |
| glibcxx_cv_c99_complex_cxx98, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <complex.h> | |
| typedef __complex__ float float_type; | |
| typedef __complex__ double double_type; | |
| typedef __complex__ long double ld_type; | |
| volatile float_type tmpf; | |
| volatile double_type tmpd; | |
| volatile ld_type tmpld; | |
| volatile float f; | |
| volatile double d; | |
| volatile long double ld;], | |
| [f = cabsf(tmpf); | |
| f = cargf(tmpf); | |
| tmpf = ccosf(tmpf); | |
| tmpf = ccoshf(tmpf); | |
| tmpf = cexpf(tmpf); | |
| tmpf = clogf(tmpf); | |
| tmpf = csinf(tmpf); | |
| tmpf = csinhf(tmpf); | |
| tmpf = csqrtf(tmpf); | |
| tmpf = ctanf(tmpf); | |
| tmpf = ctanhf(tmpf); | |
| tmpf = cpowf(tmpf, tmpf); | |
| tmpf = cprojf(tmpf); | |
| d = cabs(tmpd); | |
| d = carg(tmpd); | |
| tmpd = ccos(tmpd); | |
| tmpd = ccosh(tmpd); | |
| tmpd = cexp(tmpd); | |
| tmpd = clog(tmpd); | |
| tmpd = csin(tmpd); | |
| tmpd = csinh(tmpd); | |
| tmpd = csqrt(tmpd); | |
| tmpd = ctan(tmpd); | |
| tmpd = ctanh(tmpd); | |
| tmpd = cpow(tmpd, tmpd); | |
| tmpd = cproj(tmpd); | |
| ld = cabsl(tmpld); | |
| ld = cargl(tmpld); | |
| tmpld = ccosl(tmpld); | |
| tmpld = ccoshl(tmpld); | |
| tmpld = cexpl(tmpld); | |
| tmpld = clogl(tmpld); | |
| tmpld = csinl(tmpld); | |
| tmpld = csinhl(tmpld); | |
| tmpld = csqrtl(tmpld); | |
| tmpld = ctanl(tmpld); | |
| tmpld = ctanhl(tmpld); | |
| tmpld = cpowl(tmpld, tmpld); | |
| tmpld = cprojl(tmpld); | |
| ], [glibcxx_cv_c99_complex_cxx98=yes], [glibcxx_cv_c99_complex_cxx98=no]) | |
| ]) | |
| fi | |
| if test x"$glibcxx_cv_c99_complex_cxx98" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX98_USE_C99_COMPLEX, 1, | |
| [Define if C99 functions in <complex.h> should be used in | |
| <complex> for C++98. Using compiler builtins for these functions | |
| requires corresponding C99 library functions to be present.]) | |
| fi | |
| # Check for the existence in <stdio.h> of vscanf, et. al. | |
| AC_CACHE_CHECK([for ISO C99 support in <stdio.h> for C++98], | |
| glibcxx_cv_c99_stdio_cxx98, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <stdio.h> | |
| #include <stdarg.h> | |
| void foo(char* fmt, ...) | |
| { | |
| va_list args; va_start(args, fmt); | |
| vfscanf(stderr, "%i", args); | |
| vscanf("%i", args); | |
| vsnprintf(fmt, 0, "%i", args); | |
| vsscanf(fmt, "%i", args); | |
| snprintf(fmt, 0, "%i", 1); | |
| }], [], | |
| [glibcxx_cv_c99_stdio_cxx98=yes], [glibcxx_cv_c99_stdio_cxx98=no]) | |
| ]) | |
| if test x"$glibcxx_cv_c99_stdio_cxx98" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX98_USE_C99_STDIO, 1, | |
| [Define if C99 functions or macros in <stdio.h> should be imported | |
| in <cstdio> in namespace std for C++98.]) | |
| fi | |
| # Check for the existence in <stdlib.h> of lldiv_t, et. al. | |
| AC_CACHE_CHECK([for ISO C99 support in <stdlib.h> for C++98], | |
| glibcxx_cv_c99_stdlib_cxx98, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <stdlib.h> | |
| volatile float f; | |
| volatile long double ld; | |
| volatile unsigned long long ll; | |
| lldiv_t mydivt;], | |
| [char* tmp; | |
| f = strtof("gnu", &tmp); | |
| ld = strtold("gnu", &tmp); | |
| ll = strtoll("gnu", &tmp, 10); | |
| ll = strtoull("gnu", &tmp, 10); | |
| ll = llabs(10); | |
| mydivt = lldiv(10,1); | |
| ll = mydivt.quot; | |
| ll = mydivt.rem; | |
| ll = atoll("10"); | |
| _Exit(0); | |
| ], [glibcxx_cv_c99_stdlib_cxx98=yes], [glibcxx_cv_c99_stdlib_cxx98=no]) | |
| ]) | |
| if test x"$glibcxx_cv_c99_stdlib_cxx98" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX98_USE_C99_STDLIB, 1, | |
| [Define if C99 functions or macros in <stdlib.h> should be imported | |
| in <cstdlib> in namespace std for C++98.]) | |
| fi | |
| # Check for the existence in <wchar.h> of wcstold, etc. | |
| if test x"$ac_has_wchar_h" = xyes && | |
| test x"$ac_has_wctype_h" = xyes; then | |
| AC_CACHE_CHECK([for ISO C99 support in <wchar.h> for C++98], | |
| glibcxx_cv_c99_wchar_cxx98, [ | |
| AC_TRY_COMPILE([#include <wchar.h> | |
| namespace test | |
| { | |
| using ::wcstold; | |
| using ::wcstoll; | |
| using ::wcstoull; | |
| } | |
| ], [], [glibcxx_cv_c99_wchar_cxx98=yes], [glibcxx_cv_c99_wchar_cxx98=no]) | |
| ]) | |
| # Checks for wide character functions that may not be present. | |
| # Injection of these is wrapped with guard macros. | |
| # NB: only put functions here, instead of immediately above, if | |
| # absolutely necessary. | |
| AC_TRY_COMPILE([#include <wchar.h> | |
| namespace test { using ::vfwscanf; }], [], | |
| [AC_DEFINE(HAVE_VFWSCANF, 1, [Defined if vfwscanf exists.])], []) | |
| AC_TRY_COMPILE([#include <wchar.h> | |
| namespace test { using ::vswscanf; }], [], | |
| [AC_DEFINE(HAVE_VSWSCANF, 1, [Defined if vswscanf exists.])], []) | |
| AC_TRY_COMPILE([#include <wchar.h> | |
| namespace test { using ::vwscanf; }], [], | |
| [AC_DEFINE(HAVE_VWSCANF, 1, [Defined if vwscanf exists.])], []) | |
| AC_TRY_COMPILE([#include <wchar.h> | |
| namespace test { using ::wcstof; }], [], | |
| [AC_DEFINE(HAVE_WCSTOF, 1, [Defined if wcstof exists.])], []) | |
| AC_TRY_COMPILE([#include <wctype.h>], | |
| [wint_t t; int i = iswblank(t);], | |
| [AC_DEFINE(HAVE_ISWBLANK, 1, [Defined if iswblank exists.])], []) | |
| if test x"$glibcxx_cv_c99_wchar_cxx98" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX98_USE_C99_WCHAR, 1, | |
| [Define if C99 functions or macros in <wchar.h> should be imported | |
| in <cwchar> in namespace std for C++98.]) | |
| fi | |
| fi | |
| # Option parsed, now set things appropriately. | |
| if test x"$glibcxx_cv_c99_math_cxx98" = x"no" || | |
| test x"$glibcxx_cv_c99_complex_cxx98" = x"no" || | |
| test x"$glibcxx_cv_c99_stdio_cxx98" = x"no" || | |
| test x"$glibcxx_cv_c99_stdlib_cxx98" = x"no" || | |
| test x"$glibcxx_cv_c99_wchar_cxx98" = x"no"; then | |
| enable_c99=no; | |
| else | |
| AC_DEFINE(_GLIBCXX_USE_C99, 1, | |
| [Define if C99 functions or macros from <wchar.h>, <math.h>, | |
| <complex.h>, <stdio.h>, and <stdlib.h> can be used or exposed.]) | |
| fi | |
| gcc_no_link="$ac_save_gcc_no_link" | |
| LIBS="$ac_save_LIBS" | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| # Use -std=c++11 and test again for C99 library feature in C++11 mode. | |
| # For the reasons given above we use -std=c++11 not -std=gnu++11. | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -std=c++11" | |
| ac_save_LIBS="$LIBS" | |
| ac_save_gcc_no_link="$gcc_no_link" | |
| if test x$gcc_no_link != xyes; then | |
| # Use -fno-exceptions to that the C driver can link these tests without | |
| # hitting undefined references to personality routines. | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| AC_CHECK_LIB(m, sin, [LIBS="$LIBS -lm"], [ | |
| # Use the default compile-only tests in GCC_TRY_COMPILE_OR_LINK | |
| gcc_no_link=yes | |
| ]) | |
| fi | |
| # Check for the existence of <stdint.h> types. | |
| AC_CACHE_CHECK([for ISO C99 support in <stdint.h> for C++11], | |
| glibcxx_cv_c99_stdint, [ | |
| AC_TRY_COMPILE([#define __STDC_LIMIT_MACROS | |
| #define __STDC_CONSTANT_MACROS | |
| #include <stdint.h>], | |
| [typedef int8_t my_int8_t; | |
| my_int8_t i8 = INT8_MIN; | |
| i8 = INT8_MAX; | |
| typedef int16_t my_int16_t; | |
| my_int16_t i16 = INT16_MIN; | |
| i16 = INT16_MAX; | |
| typedef int32_t my_int32_t; | |
| my_int32_t i32 = INT32_MIN; | |
| i32 = INT32_MAX; | |
| typedef int64_t my_int64_t; | |
| my_int64_t i64 = INT64_MIN; | |
| i64 = INT64_MAX; | |
| typedef int_fast8_t my_int_fast8_t; | |
| my_int_fast8_t if8 = INT_FAST8_MIN; | |
| if8 = INT_FAST8_MAX; | |
| typedef int_fast16_t my_int_fast16_t; | |
| my_int_fast16_t if16 = INT_FAST16_MIN; | |
| if16 = INT_FAST16_MAX; | |
| typedef int_fast32_t my_int_fast32_t; | |
| my_int_fast32_t if32 = INT_FAST32_MIN; | |
| if32 = INT_FAST32_MAX; | |
| typedef int_fast64_t my_int_fast64_t; | |
| my_int_fast64_t if64 = INT_FAST64_MIN; | |
| if64 = INT_FAST64_MAX; | |
| typedef int_least8_t my_int_least8_t; | |
| my_int_least8_t il8 = INT_LEAST8_MIN; | |
| il8 = INT_LEAST8_MAX; | |
| typedef int_least16_t my_int_least16_t; | |
| my_int_least16_t il16 = INT_LEAST16_MIN; | |
| il16 = INT_LEAST16_MAX; | |
| typedef int_least32_t my_int_least32_t; | |
| my_int_least32_t il32 = INT_LEAST32_MIN; | |
| il32 = INT_LEAST32_MAX; | |
| typedef int_least64_t my_int_least64_t; | |
| my_int_least64_t il64 = INT_LEAST64_MIN; | |
| il64 = INT_LEAST64_MAX; | |
| typedef intmax_t my_intmax_t; | |
| my_intmax_t im = INTMAX_MAX; | |
| im = INTMAX_MIN; | |
| typedef intptr_t my_intptr_t; | |
| my_intptr_t ip = INTPTR_MAX; | |
| ip = INTPTR_MIN; | |
| typedef uint8_t my_uint8_t; | |
| my_uint8_t ui8 = UINT8_MAX; | |
| ui8 = UINT8_MAX; | |
| typedef uint16_t my_uint16_t; | |
| my_uint16_t ui16 = UINT16_MAX; | |
| ui16 = UINT16_MAX; | |
| typedef uint32_t my_uint32_t; | |
| my_uint32_t ui32 = UINT32_MAX; | |
| ui32 = UINT32_MAX; | |
| typedef uint64_t my_uint64_t; | |
| my_uint64_t ui64 = UINT64_MAX; | |
| ui64 = UINT64_MAX; | |
| typedef uint_fast8_t my_uint_fast8_t; | |
| my_uint_fast8_t uif8 = UINT_FAST8_MAX; | |
| uif8 = UINT_FAST8_MAX; | |
| typedef uint_fast16_t my_uint_fast16_t; | |
| my_uint_fast16_t uif16 = UINT_FAST16_MAX; | |
| uif16 = UINT_FAST16_MAX; | |
| typedef uint_fast32_t my_uint_fast32_t; | |
| my_uint_fast32_t uif32 = UINT_FAST32_MAX; | |
| uif32 = UINT_FAST32_MAX; | |
| typedef uint_fast64_t my_uint_fast64_t; | |
| my_uint_fast64_t uif64 = UINT_FAST64_MAX; | |
| uif64 = UINT_FAST64_MAX; | |
| typedef uint_least8_t my_uint_least8_t; | |
| my_uint_least8_t uil8 = UINT_LEAST8_MAX; | |
| uil8 = UINT_LEAST8_MAX; | |
| typedef uint_least16_t my_uint_least16_t; | |
| my_uint_least16_t uil16 = UINT_LEAST16_MAX; | |
| uil16 = UINT_LEAST16_MAX; | |
| typedef uint_least32_t my_uint_least32_t; | |
| my_uint_least32_t uil32 = UINT_LEAST32_MAX; | |
| uil32 = UINT_LEAST32_MAX; | |
| typedef uint_least64_t my_uint_least64_t; | |
| my_uint_least64_t uil64 = UINT_LEAST64_MAX; | |
| uil64 = UINT_LEAST64_MAX; | |
| typedef uintmax_t my_uintmax_t; | |
| my_uintmax_t uim = UINTMAX_MAX; | |
| uim = UINTMAX_MAX; | |
| typedef uintptr_t my_uintptr_t; | |
| my_uintptr_t uip = UINTPTR_MAX; | |
| uip = UINTPTR_MAX; | |
| ],[glibcxx_cv_c99_stdint=yes], | |
| [glibcxx_cv_c99_stdint=no]) | |
| ]) | |
| if test x"$glibcxx_cv_c99_stdint" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_C99_STDINT, 1, | |
| [Define if C99 types in <stdint.h> should be imported in | |
| <cstdint> in namespace std for C++11.]) | |
| fi | |
| # Check for the existence of <inttypes.h> functions (NB: doesn't make | |
| # sense if the glibcxx_cv_c99_stdint check fails, per C99, 7.8/1). | |
| ac_c99_inttypes=no; | |
| if test x"$glibcxx_cv_c99_stdint" = x"yes"; then | |
| AC_MSG_CHECKING([for ISO C99 support for C++11 in <inttypes.h>]) | |
| AC_TRY_COMPILE([#include <inttypes.h>], | |
| [intmax_t i, numer, denom, base; | |
| const char* s; | |
| char** endptr; | |
| intmax_t ret = imaxabs(i); | |
| imaxdiv_t dret = imaxdiv(numer, denom); | |
| ret = strtoimax(s, endptr, base); | |
| uintmax_t uret = strtoumax(s, endptr, base); | |
| ],[ac_c99_inttypes=yes], [ac_c99_inttypes=no]) | |
| AC_MSG_RESULT($ac_c99_inttypes) | |
| fi | |
| if test x"$ac_c99_inttypes" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_C99_INTTYPES, 1, | |
| [Define if C99 functions in <inttypes.h> should be imported in | |
| <cinttypes> in namespace std in C++11.]) | |
| fi | |
| # Check for the existence of wchar_t <inttypes.h> functions (NB: doesn't | |
| # make sense if the glibcxx_cv_c99_stdint check fails, per C99, 7.8/1). | |
| ac_c99_inttypes_wchar_t=no; | |
| if test x"$glibcxx_cv_c99_stdint" = x"yes"; then | |
| AC_MSG_CHECKING([for wchar_t ISO C99 support for C++11 in <inttypes.h>]) | |
| AC_TRY_COMPILE([#include <inttypes.h>], | |
| [intmax_t base; | |
| const wchar_t* s; | |
| wchar_t** endptr; | |
| intmax_t ret = wcstoimax(s, endptr, base); | |
| uintmax_t uret = wcstoumax(s, endptr, base); | |
| ],[ac_c99_inttypes_wchar_t=yes], | |
| [ac_c99_inttypes_wchar_t=no]) | |
| AC_MSG_RESULT($ac_c99_inttypes_wchar_t) | |
| fi | |
| if test x"$ac_c99_inttypes_wchar_t" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_C99_INTTYPES_WCHAR_T, 1, | |
| [Define if wchar_t C99 functions in <inttypes.h> should be | |
| imported in <cinttypes> in namespace std in C++11.]) | |
| fi | |
| # Check for the existence of <math.h> generic macros used if C99 is enabled. | |
| AC_CACHE_CHECK([for ISO C99 generic macro support in <math.h> for C++11], | |
| glibcxx_cv_c99_math_cxx11, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <math.h> | |
| volatile double d1, d2; | |
| volatile int i;], | |
| [i = fpclassify(d1); | |
| i = isfinite(d1); | |
| i = isinf(d1); | |
| i = isnan(d1); | |
| i = isnormal(d1); | |
| i = signbit(d1); | |
| i = isgreater(d1, d2); | |
| i = isgreaterequal(d1, d2); | |
| i = isless(d1, d2); | |
| i = islessequal(d1, d2); | |
| i = islessgreater(d1, d2); | |
| i = islessgreater(d1, d2); | |
| i = isunordered(d1, d2); | |
| ], [glibcxx_cv_c99_math_cxx11=yes], [glibcxx_cv_c99_math_cxx11=no]) | |
| ]) | |
| if test x"$glibcxx_cv_c99_math_cxx11" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX11_USE_C99_MATH, 1, | |
| [Define if C99 generic macros in <math.h> should be imported | |
| in <cmath> in namespace std for C++11.]) | |
| fi | |
| # Check for the existence of <math.h> typedefs. | |
| AC_CACHE_CHECK([for ISO C99 float types for C++11 in <math.h>], | |
| glibcxx_cv_c99_flt_eval_types, [ | |
| AC_TRY_COMPILE([#include <math.h>], | |
| [// Types | |
| typedef double_t my_double_t; | |
| typedef float_t my_float_t; | |
| ], | |
| [glibcxx_cv_c99_flt_eval_types=yes], | |
| [glibcxx_cv_c99_flt_eval_types=no]) | |
| ]) | |
| if test x"$glibcxx_cv_c99_flt_eval_types" = x"yes"; then | |
| AC_DEFINE(HAVE_C99_FLT_EVAL_TYPES, 1, | |
| [Define if C99 float_t and double_t in <math.h> should be | |
| imported in <cmath> in namespace std for C++11.]) | |
| fi | |
| # Check for the existence of <math.h> functions. | |
| AC_CACHE_CHECK([for ISO C99 function support for C++11 in <math.h>], | |
| glibcxx_cv_c99_math_funcs, [ | |
| AC_TRY_COMPILE([#include <math.h>], | |
| [ | |
| // Hyperbolic | |
| acosh(0.0); | |
| acoshf(0.0f); | |
| acoshl(0.0l); | |
| asinh(0.0); | |
| asinhf(0.0f); | |
| asinhl(0.0l); | |
| atanh(0.0); | |
| atanhf(0.0f); | |
| atanhl(0.0l); | |
| // Exponential and logarithmic | |
| exp2(0.0); | |
| exp2f(0.0f); | |
| exp2l(0.0l); | |
| expm1(0.0); | |
| expm1f(0.0f); | |
| expm1l(0.0l); | |
| ilogb(0.0); | |
| ilogbf(0.0f); | |
| ilogbl(0.0l); | |
| log1p(0.0); | |
| log1pf(0.0f); | |
| log1pl(0.0l); | |
| log2(0.0); | |
| log2f(0.0f); | |
| log2l(0.0l); | |
| logb(0.0); | |
| logbf(0.0f); | |
| logbl(0.0l); | |
| scalbln(0.0, 0l); | |
| scalblnf(0.0f, 0l); | |
| scalblnl(0.0l, 0l); | |
| scalbn(0.0, 0); | |
| scalbnf(0.0f, 0); | |
| scalbnl(0.0l, 0); | |
| // Power and absolute-value | |
| cbrt(0.0); | |
| cbrtf(0.0f); | |
| cbrtl(0.0l); | |
| hypot(0.0, 0.0); | |
| hypotf(0.0f, 0.0f); | |
| hypotl(0.0l, 0.0l); | |
| // Error and gamma | |
| erf(0.0); | |
| erff(0.0f); | |
| erfl(0.0l); | |
| erfc(0.0); | |
| erfcf(0.0f); | |
| erfcl(0.0l); | |
| lgamma(0.0); | |
| lgammaf(0.0f); | |
| lgammal(0.0l); | |
| tgamma(0.0); | |
| tgammaf(0.0f); | |
| tgammal(0.0l); | |
| // Nearest integer | |
| nearbyint(0.0); | |
| nearbyintf(0.0f); | |
| nearbyintl(0.0l); | |
| rint(0.0); | |
| rintf(0.0f); | |
| rintl(0.0l); | |
| round(0.0); | |
| roundf(0.0f); | |
| roundl(0.0l); | |
| lrint(0.0); | |
| lrintf(0.0f); | |
| lrintl(0.0l); | |
| lround(0.0); | |
| lroundf(0.0f); | |
| lroundl(0.0l); | |
| #ifndef __APPLE__ /* see below */ | |
| llrint(0.0); | |
| llrintf(0.0f); | |
| llrintl(0.0l); | |
| llround(0.0); | |
| llroundf(0.0f); | |
| llroundl(0.0l); | |
| #endif | |
| trunc(0.0); | |
| truncf(0.0f); | |
| truncl(0.0l); | |
| // Remainder | |
| remainder(0.0, 0.0); | |
| remainderf(0.0f, 0.0f); | |
| remainderl(0.0l, 0.0l); | |
| remquo(0.0, 0.0, 0); | |
| remquof(0.0f, 0.0f, 0); | |
| remquol(0.0l, 0.0l, 0); | |
| // Manipulation | |
| copysign(0.0, 0.0); | |
| copysignf(0.0f, 0.0f); | |
| copysignl(0.0l, 0.0l); | |
| nan(""); | |
| nanf(""); | |
| nanl(""); | |
| nextafter(0.0, 0.0); | |
| nextafterf(0.0f, 0.0f); | |
| nextafterl(0.0l, 0.0l); | |
| nexttoward(0.0, 0.0); | |
| nexttowardf(0.0f, 0.0f); | |
| nexttowardl(0.0l, 0.0l); | |
| // Max, min, positive difference | |
| fdim(0.0, 0.0); | |
| fdimf(0.0f, 0.0f); | |
| fdiml(0.0l, 0.0l); | |
| fmax(0.0, 0.0); | |
| fmaxf(0.0f, 0.0f); | |
| fmaxl(0.0l, 0.0l); | |
| fmin(0.0, 0.0); | |
| fminf(0.0f, 0.0f); | |
| fminl(0.0l, 0.0l); | |
| // FP Multiply-add | |
| fma(0.0, 0.0, 0.0); | |
| fmaf(0.0f, 0.0f, 0.0f); | |
| fmal(0.0l, 0.0l, 0.0l); | |
| ], | |
| [glibcxx_cv_c99_math_funcs=yes], | |
| [glibcxx_cv_c99_math_funcs=no]) | |
| ]) | |
| if test x"$glibcxx_cv_c99_math_funcs" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_C99_MATH_FUNCS, 1, | |
| [Define if C99 functions in <math.h> should be imported | |
| in <cmath> in namespace std for C++11.]) | |
| case "${target_os}" in | |
| darwin*) | |
| AC_CACHE_CHECK([for ISO C99 rounding functions in <math.h>], | |
| glibcxx_cv_c99_math_llround, [ | |
| AC_TRY_COMPILE([#include <math.h>], | |
| [llrint(0.0); | |
| llrintf(0.0f); | |
| llrintl(0.0l); | |
| llround(0.0); | |
| llroundf(0.0f); | |
| llroundl(0.0l); | |
| ], | |
| [glibcxx_cv_c99_math_llround=yes], | |
| [glibcxx_cv_c99_math_llround=no]) | |
| ]) | |
| ;; | |
| esac | |
| if test x"$glibcxx_cv_c99_math_llround" = x"no"; then | |
| AC_DEFINE(_GLIBCXX_NO_C99_ROUNDING_FUNCS, 1, | |
| [Define if C99 llrint and llround functions are missing from <math.h>.]) | |
| fi | |
| fi | |
| # Check for the existence of <complex.h> complex math functions. | |
| # This is necessary even though libstdc++ uses the builtin versions | |
| # of these functions, because if the builtin cannot be used, a reference | |
| # to the library function is emitted. | |
| AC_CHECK_HEADERS(tgmath.h, ac_has_tgmath_h=yes, ac_has_tgmath_h=no) | |
| AC_CHECK_HEADERS(complex.h, ac_has_complex_h=yes, ac_has_complex_h=no) | |
| if test x"$ac_has_complex_h" = x"yes"; then | |
| AC_CACHE_CHECK([for ISO C99 support in <complex.h> for C++11], | |
| glibcxx_cv_c99_complex_cxx11, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <complex.h> | |
| typedef __complex__ float float_type; | |
| typedef __complex__ double double_type; | |
| typedef __complex__ long double ld_type; | |
| volatile float_type tmpf; | |
| volatile double_type tmpd; | |
| volatile ld_type tmpld; | |
| volatile float f; | |
| volatile double d; | |
| volatile long double ld;], | |
| [f = cabsf(tmpf); | |
| f = cargf(tmpf); | |
| tmpf = ccosf(tmpf); | |
| tmpf = ccoshf(tmpf); | |
| tmpf = cexpf(tmpf); | |
| tmpf = clogf(tmpf); | |
| tmpf = csinf(tmpf); | |
| tmpf = csinhf(tmpf); | |
| tmpf = csqrtf(tmpf); | |
| tmpf = ctanf(tmpf); | |
| tmpf = ctanhf(tmpf); | |
| tmpf = cpowf(tmpf, tmpf); | |
| tmpf = cprojf(tmpf); | |
| d = cabs(tmpd); | |
| d = carg(tmpd); | |
| tmpd = ccos(tmpd); | |
| tmpd = ccosh(tmpd); | |
| tmpd = cexp(tmpd); | |
| tmpd = clog(tmpd); | |
| tmpd = csin(tmpd); | |
| tmpd = csinh(tmpd); | |
| tmpd = csqrt(tmpd); | |
| tmpd = ctan(tmpd); | |
| tmpd = ctanh(tmpd); | |
| tmpd = cpow(tmpd, tmpd); | |
| tmpd = cproj(tmpd); | |
| ld = cabsl(tmpld); | |
| ld = cargl(tmpld); | |
| tmpld = ccosl(tmpld); | |
| tmpld = ccoshl(tmpld); | |
| tmpld = cexpl(tmpld); | |
| tmpld = clogl(tmpld); | |
| tmpld = csinl(tmpld); | |
| tmpld = csinhl(tmpld); | |
| tmpld = csqrtl(tmpld); | |
| tmpld = ctanl(tmpld); | |
| tmpld = ctanhl(tmpld); | |
| tmpld = cpowl(tmpld, tmpld); | |
| tmpld = cprojl(tmpld); | |
| ], [glibcxx_cv_c99_complex_cxx11=yes], [glibcxx_cv_c99_complex_cxx11=no]) | |
| ]) | |
| fi | |
| if test x"$glibcxx_cv_c99_complex_cxx11" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX11_USE_C99_COMPLEX, 1, | |
| [Define if C99 functions in <complex.h> should be used in | |
| <complex> for C++11. Using compiler builtins for these functions | |
| requires corresponding C99 library functions to be present.]) | |
| fi | |
| # Check for the existence of <complex.h> complex inverse trigonometric | |
| # math functions used by <complex> for C++11 and later. | |
| ac_c99_complex_arc=no; | |
| if test x"$ac_has_complex_h" = x"yes"; then | |
| AC_MSG_CHECKING([for ISO C99 support for inverse trig functions in <complex.h>]) | |
| AC_TRY_COMPILE([#include <complex.h>], | |
| [typedef __complex__ float float_type; float_type tmpf; | |
| cacosf(tmpf); | |
| casinf(tmpf); | |
| catanf(tmpf); | |
| cacoshf(tmpf); | |
| casinhf(tmpf); | |
| catanhf(tmpf); | |
| typedef __complex__ double double_type; double_type tmpd; | |
| cacos(tmpd); | |
| casin(tmpd); | |
| catan(tmpd); | |
| cacosh(tmpd); | |
| casinh(tmpd); | |
| catanh(tmpd); | |
| typedef __complex__ long double ld_type; ld_type tmpld; | |
| cacosl(tmpld); | |
| casinl(tmpld); | |
| catanl(tmpld); | |
| cacoshl(tmpld); | |
| casinhl(tmpld); | |
| catanhl(tmpld); | |
| ],[ac_c99_complex_arc=yes], [ac_c99_complex_arc=no]) | |
| fi | |
| AC_MSG_RESULT($ac_c99_complex_arc) | |
| if test x"$ac_c99_complex_arc" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_C99_COMPLEX_ARC, 1, | |
| [Define if C99 inverse trig functions in <complex.h> should be | |
| used in <complex>. Using compiler builtins for these functions | |
| requires corresponding C99 library functions to be present.]) | |
| fi | |
| # Check for the existence in <stdio.h> of vscanf, et. al. | |
| AC_CACHE_CHECK([for ISO C99 support in <stdio.h> for C++11], | |
| glibcxx_cv_c99_stdio_cxx11, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <stdio.h> | |
| #include <stdarg.h> | |
| void foo(char* fmt, ...) | |
| { | |
| va_list args; va_start(args, fmt); | |
| vfscanf(stderr, "%i", args); | |
| vscanf("%i", args); | |
| vsnprintf(fmt, 0, "%i", args); | |
| vsscanf(fmt, "%i", args); | |
| snprintf(fmt, 0, "%i", 1); | |
| }], [], | |
| [glibcxx_cv_c99_stdio_cxx11=yes], [glibcxx_cv_c99_stdio_cxx11=no]) | |
| ]) | |
| if test x"$glibcxx_cv_c99_stdio_cxx11" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX11_USE_C99_STDIO, 1, | |
| [Define if C99 functions or macros in <stdio.h> should be imported | |
| in <cstdio> in namespace std for C++11.]) | |
| fi | |
| # Check for the existence in <stdlib.h> of lldiv_t, et. al. | |
| AC_CACHE_CHECK([for ISO C99 support in <stdlib.h> for C++11], | |
| glibcxx_cv_c99_stdlib_cxx11, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <stdlib.h> | |
| volatile float f; | |
| volatile long double ld; | |
| volatile unsigned long long ll; | |
| lldiv_t mydivt;], | |
| [char* tmp; | |
| f = strtof("gnu", &tmp); | |
| ld = strtold("gnu", &tmp); | |
| ll = strtoll("gnu", &tmp, 10); | |
| ll = strtoull("gnu", &tmp, 10); | |
| ll = llabs(10); | |
| mydivt = lldiv(10,1); | |
| ll = mydivt.quot; | |
| ll = mydivt.rem; | |
| ll = atoll("10"); | |
| _Exit(0); | |
| ], [glibcxx_cv_c99_stdlib_cxx11=yes], [glibcxx_cv_c99_stdlib_cxx11=no]) | |
| ]) | |
| if test x"$glibcxx_cv_c99_stdlib_cxx11" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX11_USE_C99_STDLIB, 1, | |
| [Define if C99 functions or macros in <stdlib.h> should be imported | |
| in <cstdlib> in namespace std for C++11.]) | |
| fi | |
| # Check for the existence in <wchar.h> of wcstold, etc. | |
| if test x"$ac_has_wchar_h" = xyes && | |
| test x"$ac_has_wctype_h" = xyes; then | |
| AC_CACHE_CHECK([for ISO C99 support in <wchar.h> for C++11], | |
| glibcxx_cv_c99_wchar_cxx11, [ | |
| AC_TRY_COMPILE([#include <wchar.h> | |
| namespace test | |
| { | |
| using ::wcstold; | |
| using ::wcstoll; | |
| using ::wcstoull; | |
| } | |
| ], [], [glibcxx_cv_c99_wchar_cxx11=yes], [glibcxx_cv_c99_wchar_cxx11=no]) | |
| ]) | |
| # Checks for wide character functions that may not be present. | |
| # Injection of these is wrapped with guard macros. | |
| # NB: only put functions here, instead of immediately above, if | |
| # absolutely necessary. | |
| AC_TRY_COMPILE([#include <wchar.h> | |
| namespace test { using ::vfwscanf; }], [], | |
| [AC_DEFINE(HAVE_VFWSCANF, 1, [Defined if vfwscanf exists.])], []) | |
| AC_TRY_COMPILE([#include <wchar.h> | |
| namespace test { using ::vswscanf; }], [], | |
| [AC_DEFINE(HAVE_VSWSCANF, 1, [Defined if vswscanf exists.])], []) | |
| AC_TRY_COMPILE([#include <wchar.h> | |
| namespace test { using ::vwscanf; }], [], | |
| [AC_DEFINE(HAVE_VWSCANF, 1, [Defined if vwscanf exists.])], []) | |
| AC_TRY_COMPILE([#include <wchar.h> | |
| namespace test { using ::wcstof; }], [], | |
| [AC_DEFINE(HAVE_WCSTOF, 1, [Defined if wcstof exists.])], []) | |
| AC_TRY_COMPILE([#include <wctype.h>], | |
| [wint_t t; int i = iswblank(t);], | |
| [AC_DEFINE(HAVE_ISWBLANK, 1, [Defined if iswblank exists.])], []) | |
| if test x"$glibcxx_cv_c99_wchar_cxx11" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX11_USE_C99_WCHAR, 1, | |
| [Define if C99 functions or macros in <wchar.h> should be imported | |
| in <cwchar> in namespace std for C++11.]) | |
| fi | |
| fi | |
| # Check for the existence of <ctype.h> functions. | |
| AC_CACHE_CHECK([for ISO C99 support for C++11 in <ctype.h>], | |
| glibcxx_cv_c99_ctype, [ | |
| AC_TRY_COMPILE([#include <ctype.h>], | |
| [int ch; | |
| int ret; | |
| ret = isblank(ch); | |
| ],[glibcxx_cv_c99_ctype=yes], | |
| [glibcxx_cv_c99_ctype=no]) | |
| ]) | |
| if test x"$glibcxx_cv_c99_ctype" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_C99_CTYPE, 1, | |
| [Define if C99 functions in <ctype.h> should be imported in | |
| <cctype> in namespace std for C++11.]) | |
| fi | |
| # Check for the existence of <fenv.h> functions. | |
| AC_CHECK_HEADERS(fenv.h, ac_has_fenv_h=yes, ac_has_fenv_h=no) | |
| ac_c99_fenv=no; | |
| if test x"$ac_has_fenv_h" = x"yes"; then | |
| AC_MSG_CHECKING([for ISO C99 support for C++11 in <fenv.h>]) | |
| AC_TRY_COMPILE([#include <fenv.h>], | |
| [int except, mode; | |
| fexcept_t* pflag; | |
| fenv_t* penv; | |
| int ret; | |
| ret = feclearexcept(except); | |
| ret = fegetexceptflag(pflag, except); | |
| ret = feraiseexcept(except); | |
| ret = fesetexceptflag(pflag, except); | |
| ret = fetestexcept(except); | |
| ret = fegetround(); | |
| ret = fesetround(mode); | |
| ret = fegetenv(penv); | |
| ret = feholdexcept(penv); | |
| ret = fesetenv(penv); | |
| ret = feupdateenv(penv); | |
| ],[ac_c99_fenv=yes], [ac_c99_fenv=no]) | |
| AC_MSG_RESULT($ac_c99_fenv) | |
| fi | |
| if test x"$ac_c99_fenv" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_C99_FENV, 1, | |
| [Define if C99 functions in <fenv.h> should be imported in | |
| <cfenv> in namespace std for C++11.]) | |
| fi | |
| gcc_no_link="$ac_save_gcc_no_link" | |
| LIBS="$ac_save_LIBS" | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| fi | |
| AC_MSG_CHECKING([for fully enabled ISO C99 support]) | |
| AC_MSG_RESULT($enable_c99) | |
| ]) | |
| dnl | |
| dnl Check for clock_gettime, nanosleep and sched_yield, used in the | |
| dnl implementation of 20.11.7 [time.clock], and 30.3.2 [thread.thread.this] | |
| dnl in the C++11 standard. | |
| dnl | |
| dnl --enable-libstdcxx-time | |
| dnl --enable-libstdcxx-time=yes | |
| dnl checks for the availability of monotonic and realtime clocks, | |
| dnl nanosleep and sched_yield in libc. | |
| dnl --enable-libstdcxx-time=rt | |
| dnl also searches (and, if needed, links) librt. Note that this is | |
| dnl not always desirable because, in glibc 2.16 and earlier, for | |
| dnl example, in turn it triggers the linking of libpthread too, | |
| dnl which activates locking, | |
| dnl a large overhead for single-thread programs. | |
| dnl --enable-libstdcxx-time=no | |
| dnl --disable-libstdcxx-time | |
| dnl disables the checks completely | |
| dnl | |
| dnl N.B. Darwin provides nanosleep but doesn't support the whole POSIX | |
| dnl Timers option, so doesn't define _POSIX_TIMERS. Because the test | |
| dnl below fails Darwin unconditionally defines _GLIBCXX_USE_NANOSLEEP in | |
| dnl os_defines.h and also defines _GLIBCXX_USE_SCHED_YIELD. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_LIBSTDCXX_TIME], [ | |
| GLIBCXX_ENABLE(libstdcxx-time,auto,[[[=KIND]]], | |
| [use KIND for check type], | |
| [permit yes|no|rt]) | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| ac_save_LIBS="$LIBS" | |
| ac_has_clock_monotonic=no | |
| ac_has_clock_realtime=no | |
| ac_has_nanosleep=no | |
| ac_has_sched_yield=no | |
| if test x"$enable_libstdcxx_time" = x"auto"; then | |
| case "${target_os}" in | |
| cygwin*) | |
| ac_has_nanosleep=yes | |
| ;; | |
| mingw*) | |
| ac_has_win32_sleep=yes | |
| ac_has_sched_yield=yes | |
| ;; | |
| darwin*) | |
| ac_has_nanosleep=yes | |
| ac_has_sched_yield=yes | |
| ;; | |
| # VxWorks has nanosleep as soon as the kernel is configured with | |
| # INCLUDE_POSIX_TIMERS, which is normally/most-often the case. | |
| vxworks*) | |
| ac_has_nanosleep=yes | |
| ;; | |
| gnu* | linux* | kfreebsd*-gnu | knetbsd*-gnu) | |
| # Don't use link test for freestanding library, in case gcc_no_link=yes | |
| if test x"$is_hosted" = xyes; then | |
| # Versions of glibc before 2.17 needed -lrt for clock_gettime. | |
| AC_SEARCH_LIBS(clock_gettime, [rt]) | |
| if test x"$ac_cv_search_clock_gettime" = x"none required"; then | |
| ac_has_clock_monotonic=yes | |
| ac_has_clock_realtime=yes | |
| fi | |
| fi | |
| ac_has_nanosleep=yes | |
| ac_has_sched_yield=yes | |
| ;; | |
| freebsd*|netbsd*|dragonfly*|rtems*) | |
| ac_has_clock_monotonic=yes | |
| ac_has_clock_realtime=yes | |
| ac_has_nanosleep=yes | |
| ac_has_sched_yield=yes | |
| ;; | |
| openbsd*) | |
| ac_has_clock_monotonic=yes | |
| ac_has_clock_realtime=yes | |
| ac_has_nanosleep=yes | |
| ;; | |
| solaris*) | |
| ac_has_clock_monotonic=yes | |
| ac_has_clock_realtime=yes | |
| ac_has_nanosleep=yes | |
| ac_has_sched_yield=yes | |
| ;; | |
| uclinux*) | |
| ac_has_nanosleep=yes | |
| ac_has_sched_yield=yes | |
| esac | |
| elif test x"$enable_libstdcxx_time" != x"no"; then | |
| if test x"$enable_libstdcxx_time" = x"rt"; then | |
| AC_SEARCH_LIBS(clock_gettime, [rt]) | |
| AC_SEARCH_LIBS(nanosleep, [rt]) | |
| else | |
| AC_CHECK_FUNC(clock_gettime) | |
| AC_CHECK_FUNC(nanosleep) | |
| fi | |
| case "$ac_cv_search_clock_gettime" in | |
| -l*) GLIBCXX_LIBS=$ac_cv_search_clock_gettime | |
| ;; | |
| esac | |
| case "$ac_cv_search_nanosleep" in | |
| -l*) GLIBCXX_LIBS="$GLIBCXX_LIBS $ac_cv_search_nanosleep" | |
| ;; | |
| esac | |
| AC_SEARCH_LIBS(sched_yield, [rt]) | |
| case "$ac_cv_search_sched_yield" in | |
| -lrt*) | |
| if test x"$enable_libstdcxx_time" = x"rt"; then | |
| GLIBCXX_LIBS="$GLIBCXX_LIBS $ac_cv_search_sched_yield" | |
| ac_has_sched_yield=yes | |
| fi | |
| ;; | |
| *) | |
| ac_has_sched_yield=yes | |
| ;; | |
| esac | |
| AC_CHECK_HEADERS(unistd.h, ac_has_unistd_h=yes, ac_has_unistd_h=no) | |
| if test x"$ac_has_unistd_h" = x"yes"; then | |
| AC_MSG_CHECKING([for monotonic clock]) | |
| AC_TRY_LINK( | |
| [#include <unistd.h> | |
| #include <time.h> | |
| ], | |
| [#if _POSIX_TIMERS > 0 && defined(_POSIX_MONOTONIC_CLOCK) | |
| timespec tp; | |
| #endif | |
| clock_gettime(CLOCK_MONOTONIC, &tp); | |
| ], [ac_has_clock_monotonic=yes], [ac_has_clock_monotonic=no]) | |
| AC_MSG_RESULT($ac_has_clock_monotonic) | |
| AC_MSG_CHECKING([for realtime clock]) | |
| AC_TRY_LINK( | |
| [#include <unistd.h> | |
| #include <time.h> | |
| ], | |
| [#if _POSIX_TIMERS > 0 | |
| timespec tp; | |
| #endif | |
| clock_gettime(CLOCK_REALTIME, &tp); | |
| ], [ac_has_clock_realtime=yes], [ac_has_clock_realtime=no]) | |
| AC_MSG_RESULT($ac_has_clock_realtime) | |
| AC_MSG_CHECKING([for nanosleep]) | |
| AC_TRY_LINK( | |
| [#include <unistd.h> | |
| #include <time.h> | |
| ], | |
| [#if _POSIX_TIMERS > 0 | |
| timespec tp; | |
| #endif | |
| nanosleep(&tp, 0); | |
| ], [ac_has_nanosleep=yes], [ac_has_nanosleep=no]) | |
| AC_MSG_RESULT($ac_has_nanosleep) | |
| fi | |
| fi | |
| if test x"$ac_has_clock_monotonic" != x"yes"; then | |
| case ${target_os} in | |
| linux* | uclinux*) | |
| AC_MSG_CHECKING([for clock_gettime syscall]) | |
| AC_TRY_COMPILE( | |
| [#include <unistd.h> | |
| #include <time.h> | |
| #include <sys/syscall.h> | |
| ], | |
| [#if _POSIX_TIMERS > 0 && defined(_POSIX_MONOTONIC_CLOCK) | |
| timespec tp; | |
| #endif | |
| syscall(SYS_clock_gettime, CLOCK_MONOTONIC, &tp); | |
| syscall(SYS_clock_gettime, CLOCK_REALTIME, &tp); | |
| ], [ac_has_clock_gettime_syscall=yes], [ac_has_clock_gettime_syscall=no]) | |
| AC_MSG_RESULT($ac_has_clock_gettime_syscall) | |
| if test x"$ac_has_clock_gettime_syscall" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_CLOCK_GETTIME_SYSCALL, 1, | |
| [Defined if clock_gettime syscall has monotonic and realtime clock support. ]) | |
| ac_has_clock_monotonic=yes | |
| ac_has_clock_realtime=yes | |
| AC_MSG_CHECKING([for struct timespec that matches syscall]) | |
| AC_TRY_COMPILE( | |
| [#include <time.h> | |
| #include <sys/syscall.h> | |
| ], | |
| [#ifdef SYS_clock_gettime64 | |
| #if SYS_clock_gettime64 != SYS_clock_gettime | |
| // We need to use SYS_clock_gettime and libc appears to | |
| // also know about the SYS_clock_gettime64 syscall. | |
| // Check that userspace doesn't use time64 version of timespec. | |
| static_assert(sizeof(timespec::tv_sec) == sizeof(long), | |
| "struct timespec must be compatible with SYS_clock_gettime"); | |
| #endif | |
| #endif | |
| ], | |
| [ac_timespec_matches_syscall=yes], | |
| [ac_timespec_matches_syscall=no]) | |
| AC_MSG_RESULT($ac_timespec_matches_syscall) | |
| if test x"$ac_timespec_matches_syscall" = no; then | |
| AC_MSG_ERROR([struct timespec is not compatible with SYS_clock_gettime, please report a bug to http://gcc.gnu.org/bugzilla]) | |
| fi | |
| fi;; | |
| esac | |
| fi | |
| if test x"$ac_has_clock_monotonic" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_CLOCK_MONOTONIC, 1, | |
| [ Defined if clock_gettime has monotonic clock support. ]) | |
| fi | |
| if test x"$ac_has_clock_realtime" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_CLOCK_REALTIME, 1, | |
| [ Defined if clock_gettime has realtime clock support. ]) | |
| fi | |
| if test x"$ac_has_sched_yield" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_SCHED_YIELD, 1, | |
| [ Defined if sched_yield is available. ]) | |
| fi | |
| if test x"$ac_has_nanosleep" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_NANOSLEEP, 1, | |
| [ Defined if nanosleep is available. ]) | |
| elif test x"$ac_has_win32_sleep" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_WIN32_SLEEP, 1, | |
| [Defined if Sleep exists.]) | |
| else | |
| AC_MSG_CHECKING([for sleep]) | |
| AC_TRY_COMPILE([#include <unistd.h>], | |
| [sleep(1)], | |
| [ac_has_sleep=yes],[ac_has_sleep=no]) | |
| if test x"$ac_has_sleep" = x"yes"; then | |
| AC_DEFINE(HAVE_SLEEP,1, [Defined if sleep exists.]) | |
| fi | |
| AC_MSG_RESULT($ac_has_sleep) | |
| AC_MSG_CHECKING([for usleep]) | |
| AC_TRY_COMPILE([#include <unistd.h>], | |
| [sleep(1); | |
| usleep(100);], | |
| [ac_has_usleep=yes],[ac_has_usleep=no]) | |
| if test x"$ac_has_usleep" = x"yes"; then | |
| AC_DEFINE(HAVE_USLEEP,1, [Defined if usleep exists.]) | |
| fi | |
| AC_MSG_RESULT($ac_has_usleep) | |
| fi | |
| if test x"$ac_has_nanosleep$ac_has_win32_sleep$ac_has_sleep" = x"nonono"; then | |
| AC_DEFINE(_GLIBCXX_NO_SLEEP,1, [Defined if no way to sleep is available.]) | |
| fi | |
| AC_SUBST(GLIBCXX_LIBS) | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| LIBS="$ac_save_LIBS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check for gettimeofday, used in the implementation of 20.11.7 | |
| dnl [time.clock] in the C++11 standard. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_GETTIMEOFDAY], [ | |
| AC_MSG_CHECKING([for gettimeofday]) | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| ac_has_gettimeofday=no; | |
| AC_CHECK_HEADERS(sys/time.h, ac_has_sys_time_h=yes, ac_has_sys_time_h=no) | |
| if test x"$ac_has_sys_time_h" = x"yes"; then | |
| AC_MSG_CHECKING([for gettimeofday]) | |
| GCC_TRY_COMPILE_OR_LINK([#include <sys/time.h>], | |
| [timeval tv; gettimeofday(&tv, 0);], | |
| [ac_has_gettimeofday=yes], [ac_has_gettimeofday=no]) | |
| AC_MSG_RESULT($ac_has_gettimeofday) | |
| fi | |
| if test x"$ac_has_gettimeofday" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_GETTIMEOFDAY, 1, | |
| [ Defined if gettimeofday is available. ]) | |
| fi | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check for ISO/IEC 9899:1999 "C99" support to ISO/IEC DTR 19768 "TR1" | |
| dnl facilities in Chapter 8, "C compatibility". | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_C99_TR1], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| # Use -std=c++98 because -std=gnu++98 leaves __STRICT_ANSI__ | |
| # undefined and fake C99 facilities may be spuriously enabled. | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -std=c++98" | |
| # Check for the existence of <complex.h> complex math functions used | |
| # by tr1/complex. | |
| AC_CHECK_HEADERS(complex.h, ac_has_complex_h=yes, ac_has_complex_h=no) | |
| ac_c99_complex_tr1=no; | |
| if test x"$ac_has_complex_h" = x"yes"; then | |
| AC_MSG_CHECKING([for ISO C99 support to TR1 in <complex.h>]) | |
| AC_TRY_COMPILE([#include <complex.h>], | |
| [typedef __complex__ float float_type; float_type tmpf; | |
| cacosf(tmpf); | |
| casinf(tmpf); | |
| catanf(tmpf); | |
| cacoshf(tmpf); | |
| casinhf(tmpf); | |
| catanhf(tmpf); | |
| typedef __complex__ double double_type; double_type tmpd; | |
| cacos(tmpd); | |
| casin(tmpd); | |
| catan(tmpd); | |
| cacosh(tmpd); | |
| casinh(tmpd); | |
| catanh(tmpd); | |
| typedef __complex__ long double ld_type; ld_type tmpld; | |
| cacosl(tmpld); | |
| casinl(tmpld); | |
| catanl(tmpld); | |
| cacoshl(tmpld); | |
| casinhl(tmpld); | |
| catanhl(tmpld); | |
| ],[ac_c99_complex_tr1=yes], [ac_c99_complex_tr1=no]) | |
| fi | |
| AC_MSG_RESULT($ac_c99_complex_tr1) | |
| if test x"$ac_c99_complex_tr1" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_C99_COMPLEX_TR1, 1, | |
| [Define if C99 functions in <complex.h> should be used in | |
| <tr1/complex>. Using compiler builtins for these functions | |
| requires corresponding C99 library functions to be present.]) | |
| fi | |
| # Check for the existence of <ctype.h> functions. | |
| AC_CACHE_CHECK([for ISO C99 support to TR1 in <ctype.h>], | |
| glibcxx_cv_c99_ctype_tr1, [ | |
| AC_TRY_COMPILE([#include <ctype.h>], | |
| [int ch; | |
| int ret; | |
| ret = isblank(ch); | |
| ],[glibcxx_cv_c99_ctype_tr1=yes], | |
| [glibcxx_cv_c99_ctype_tr1=no]) | |
| ]) | |
| if test x"$glibcxx_cv_c99_ctype_tr1" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_C99_CTYPE_TR1, 1, | |
| [Define if C99 functions in <ctype.h> should be imported in | |
| <tr1/cctype> in namespace std::tr1.]) | |
| fi | |
| # Check for the existence of <fenv.h> functions. | |
| AC_CHECK_HEADERS(fenv.h, ac_has_fenv_h=yes, ac_has_fenv_h=no) | |
| ac_c99_fenv_tr1=no; | |
| if test x"$ac_has_fenv_h" = x"yes"; then | |
| AC_MSG_CHECKING([for ISO C99 support to TR1 in <fenv.h>]) | |
| AC_TRY_COMPILE([#include <fenv.h>], | |
| [int except, mode; | |
| fexcept_t* pflag; | |
| fenv_t* penv; | |
| int ret; | |
| ret = feclearexcept(except); | |
| ret = fegetexceptflag(pflag, except); | |
| ret = feraiseexcept(except); | |
| ret = fesetexceptflag(pflag, except); | |
| ret = fetestexcept(except); | |
| ret = fegetround(); | |
| ret = fesetround(mode); | |
| ret = fegetenv(penv); | |
| ret = feholdexcept(penv); | |
| ret = fesetenv(penv); | |
| ret = feupdateenv(penv); | |
| ],[ac_c99_fenv_tr1=yes], [ac_c99_fenv_tr1=no]) | |
| AC_MSG_RESULT($ac_c99_fenv_tr1) | |
| fi | |
| if test x"$ac_c99_fenv_tr1" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_C99_FENV_TR1, 1, | |
| [Define if C99 functions in <fenv.h> should be imported in | |
| <tr1/cfenv> in namespace std::tr1.]) | |
| fi | |
| # Check for the existence of <stdint.h> types. | |
| AC_CACHE_CHECK([for ISO C99 support to TR1 in <stdint.h>], | |
| glibcxx_cv_c99_stdint_tr1, [ | |
| AC_TRY_COMPILE([#define __STDC_LIMIT_MACROS | |
| #define __STDC_CONSTANT_MACROS | |
| #include <stdint.h>], | |
| [typedef int8_t my_int8_t; | |
| my_int8_t i8 = INT8_MIN; | |
| i8 = INT8_MAX; | |
| typedef int16_t my_int16_t; | |
| my_int16_t i16 = INT16_MIN; | |
| i16 = INT16_MAX; | |
| typedef int32_t my_int32_t; | |
| my_int32_t i32 = INT32_MIN; | |
| i32 = INT32_MAX; | |
| typedef int64_t my_int64_t; | |
| my_int64_t i64 = INT64_MIN; | |
| i64 = INT64_MAX; | |
| typedef int_fast8_t my_int_fast8_t; | |
| my_int_fast8_t if8 = INT_FAST8_MIN; | |
| if8 = INT_FAST8_MAX; | |
| typedef int_fast16_t my_int_fast16_t; | |
| my_int_fast16_t if16 = INT_FAST16_MIN; | |
| if16 = INT_FAST16_MAX; | |
| typedef int_fast32_t my_int_fast32_t; | |
| my_int_fast32_t if32 = INT_FAST32_MIN; | |
| if32 = INT_FAST32_MAX; | |
| typedef int_fast64_t my_int_fast64_t; | |
| my_int_fast64_t if64 = INT_FAST64_MIN; | |
| if64 = INT_FAST64_MAX; | |
| typedef int_least8_t my_int_least8_t; | |
| my_int_least8_t il8 = INT_LEAST8_MIN; | |
| il8 = INT_LEAST8_MAX; | |
| typedef int_least16_t my_int_least16_t; | |
| my_int_least16_t il16 = INT_LEAST16_MIN; | |
| il16 = INT_LEAST16_MAX; | |
| typedef int_least32_t my_int_least32_t; | |
| my_int_least32_t il32 = INT_LEAST32_MIN; | |
| il32 = INT_LEAST32_MAX; | |
| typedef int_least64_t my_int_least64_t; | |
| my_int_least64_t il64 = INT_LEAST64_MIN; | |
| il64 = INT_LEAST64_MAX; | |
| typedef intmax_t my_intmax_t; | |
| my_intmax_t im = INTMAX_MAX; | |
| im = INTMAX_MIN; | |
| typedef intptr_t my_intptr_t; | |
| my_intptr_t ip = INTPTR_MAX; | |
| ip = INTPTR_MIN; | |
| typedef uint8_t my_uint8_t; | |
| my_uint8_t ui8 = UINT8_MAX; | |
| ui8 = UINT8_MAX; | |
| typedef uint16_t my_uint16_t; | |
| my_uint16_t ui16 = UINT16_MAX; | |
| ui16 = UINT16_MAX; | |
| typedef uint32_t my_uint32_t; | |
| my_uint32_t ui32 = UINT32_MAX; | |
| ui32 = UINT32_MAX; | |
| typedef uint64_t my_uint64_t; | |
| my_uint64_t ui64 = UINT64_MAX; | |
| ui64 = UINT64_MAX; | |
| typedef uint_fast8_t my_uint_fast8_t; | |
| my_uint_fast8_t uif8 = UINT_FAST8_MAX; | |
| uif8 = UINT_FAST8_MAX; | |
| typedef uint_fast16_t my_uint_fast16_t; | |
| my_uint_fast16_t uif16 = UINT_FAST16_MAX; | |
| uif16 = UINT_FAST16_MAX; | |
| typedef uint_fast32_t my_uint_fast32_t; | |
| my_uint_fast32_t uif32 = UINT_FAST32_MAX; | |
| uif32 = UINT_FAST32_MAX; | |
| typedef uint_fast64_t my_uint_fast64_t; | |
| my_uint_fast64_t uif64 = UINT_FAST64_MAX; | |
| uif64 = UINT_FAST64_MAX; | |
| typedef uint_least8_t my_uint_least8_t; | |
| my_uint_least8_t uil8 = UINT_LEAST8_MAX; | |
| uil8 = UINT_LEAST8_MAX; | |
| typedef uint_least16_t my_uint_least16_t; | |
| my_uint_least16_t uil16 = UINT_LEAST16_MAX; | |
| uil16 = UINT_LEAST16_MAX; | |
| typedef uint_least32_t my_uint_least32_t; | |
| my_uint_least32_t uil32 = UINT_LEAST32_MAX; | |
| uil32 = UINT_LEAST32_MAX; | |
| typedef uint_least64_t my_uint_least64_t; | |
| my_uint_least64_t uil64 = UINT_LEAST64_MAX; | |
| uil64 = UINT_LEAST64_MAX; | |
| typedef uintmax_t my_uintmax_t; | |
| my_uintmax_t uim = UINTMAX_MAX; | |
| uim = UINTMAX_MAX; | |
| typedef uintptr_t my_uintptr_t; | |
| my_uintptr_t uip = UINTPTR_MAX; | |
| uip = UINTPTR_MAX; | |
| ],[glibcxx_cv_c99_stdint_tr1=yes], | |
| [glibcxx_cv_c99_stdint_tr1=no]) | |
| ]) | |
| if test x"$glibcxx_cv_c99_stdint_tr1" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_C99_STDINT_TR1, 1, | |
| [Define if C99 types in <stdint.h> should be imported in | |
| <tr1/cstdint> in namespace std::tr1.]) | |
| fi | |
| # Check for the existence of <math.h> functions. | |
| AC_CACHE_CHECK([for ISO C99 support to TR1 in <math.h>], | |
| glibcxx_cv_c99_math_tr1, [ | |
| AC_TRY_COMPILE([#include <math.h>], | |
| [typedef double_t my_double_t; | |
| typedef float_t my_float_t; | |
| acosh(0.0); | |
| acoshf(0.0f); | |
| acoshl(0.0l); | |
| asinh(0.0); | |
| asinhf(0.0f); | |
| asinhl(0.0l); | |
| atanh(0.0); | |
| atanhf(0.0f); | |
| atanhl(0.0l); | |
| cbrt(0.0); | |
| cbrtf(0.0f); | |
| cbrtl(0.0l); | |
| copysign(0.0, 0.0); | |
| copysignf(0.0f, 0.0f); | |
| copysignl(0.0l, 0.0l); | |
| erf(0.0); | |
| erff(0.0f); | |
| erfl(0.0l); | |
| erfc(0.0); | |
| erfcf(0.0f); | |
| erfcl(0.0l); | |
| exp2(0.0); | |
| exp2f(0.0f); | |
| exp2l(0.0l); | |
| expm1(0.0); | |
| expm1f(0.0f); | |
| expm1l(0.0l); | |
| fdim(0.0, 0.0); | |
| fdimf(0.0f, 0.0f); | |
| fdiml(0.0l, 0.0l); | |
| fma(0.0, 0.0, 0.0); | |
| fmaf(0.0f, 0.0f, 0.0f); | |
| fmal(0.0l, 0.0l, 0.0l); | |
| fmax(0.0, 0.0); | |
| fmaxf(0.0f, 0.0f); | |
| fmaxl(0.0l, 0.0l); | |
| fmin(0.0, 0.0); | |
| fminf(0.0f, 0.0f); | |
| fminl(0.0l, 0.0l); | |
| hypot(0.0, 0.0); | |
| hypotf(0.0f, 0.0f); | |
| hypotl(0.0l, 0.0l); | |
| ilogb(0.0); | |
| ilogbf(0.0f); | |
| ilogbl(0.0l); | |
| lgamma(0.0); | |
| lgammaf(0.0f); | |
| lgammal(0.0l); | |
| #ifndef __APPLE__ /* see below */ | |
| llrint(0.0); | |
| llrintf(0.0f); | |
| llrintl(0.0l); | |
| llround(0.0); | |
| llroundf(0.0f); | |
| llroundl(0.0l); | |
| #endif | |
| log1p(0.0); | |
| log1pf(0.0f); | |
| log1pl(0.0l); | |
| log2(0.0); | |
| log2f(0.0f); | |
| log2l(0.0l); | |
| logb(0.0); | |
| logbf(0.0f); | |
| logbl(0.0l); | |
| lrint(0.0); | |
| lrintf(0.0f); | |
| lrintl(0.0l); | |
| lround(0.0); | |
| lroundf(0.0f); | |
| lroundl(0.0l); | |
| nan(""); | |
| nanf(""); | |
| nanl(""); | |
| nearbyint(0.0); | |
| nearbyintf(0.0f); | |
| nearbyintl(0.0l); | |
| nextafter(0.0, 0.0); | |
| nextafterf(0.0f, 0.0f); | |
| nextafterl(0.0l, 0.0l); | |
| nexttoward(0.0, 0.0); | |
| nexttowardf(0.0f, 0.0f); | |
| nexttowardl(0.0l, 0.0l); | |
| remainder(0.0, 0.0); | |
| remainderf(0.0f, 0.0f); | |
| remainderl(0.0l, 0.0l); | |
| remquo(0.0, 0.0, 0); | |
| remquof(0.0f, 0.0f, 0); | |
| remquol(0.0l, 0.0l, 0); | |
| rint(0.0); | |
| rintf(0.0f); | |
| rintl(0.0l); | |
| round(0.0); | |
| roundf(0.0f); | |
| roundl(0.0l); | |
| scalbln(0.0, 0l); | |
| scalblnf(0.0f, 0l); | |
| scalblnl(0.0l, 0l); | |
| scalbn(0.0, 0); | |
| scalbnf(0.0f, 0); | |
| scalbnl(0.0l, 0); | |
| tgamma(0.0); | |
| tgammaf(0.0f); | |
| tgammal(0.0l); | |
| trunc(0.0); | |
| truncf(0.0f); | |
| truncl(0.0l); | |
| ],[glibcxx_cv_c99_math_tr1=yes], [glibcxx_cv_c99_math_tr1=no]) | |
| ]) | |
| if test x"$glibcxx_cv_c99_math_tr1" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_C99_MATH_TR1, 1, | |
| [Define if C99 functions or macros in <math.h> should be imported | |
| in <tr1/cmath> in namespace std::tr1.]) | |
| fi | |
| # Check for the existence of <inttypes.h> functions (NB: doesn't make | |
| # sense if the glibcxx_cv_c99_stdint_tr1 check fails, per C99, 7.8/1). | |
| ac_c99_inttypes_tr1=no; | |
| if test x"$glibcxx_cv_c99_stdint_tr1" = x"yes"; then | |
| AC_MSG_CHECKING([for ISO C99 support to TR1 in <inttypes.h>]) | |
| AC_TRY_COMPILE([#include <inttypes.h>], | |
| [intmax_t i, numer, denom, base; | |
| const char* s; | |
| char** endptr; | |
| intmax_t ret = imaxabs(i); | |
| imaxdiv_t dret = imaxdiv(numer, denom); | |
| ret = strtoimax(s, endptr, base); | |
| uintmax_t uret = strtoumax(s, endptr, base); | |
| ],[ac_c99_inttypes_tr1=yes], [ac_c99_inttypes_tr1=no]) | |
| AC_MSG_RESULT($ac_c99_inttypes_tr1) | |
| fi | |
| if test x"$ac_c99_inttypes_tr1" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_C99_INTTYPES_TR1, 1, | |
| [Define if C99 functions in <inttypes.h> should be imported in | |
| <tr1/cinttypes> in namespace std::tr1.]) | |
| fi | |
| # Check for the existence of wchar_t <inttypes.h> functions (NB: doesn't | |
| # make sense if the glibcxx_cv_c99_stdint_tr1 check fails, per C99, 7.8/1). | |
| ac_c99_inttypes_wchar_t_tr1=no; | |
| if test x"$glibcxx_cv_c99_stdint_tr1" = x"yes"; then | |
| AC_MSG_CHECKING([for wchar_t ISO C99 support to TR1 in <inttypes.h>]) | |
| AC_TRY_COMPILE([#include <inttypes.h>], | |
| [intmax_t base; | |
| const wchar_t* s; | |
| wchar_t** endptr; | |
| intmax_t ret = wcstoimax(s, endptr, base); | |
| uintmax_t uret = wcstoumax(s, endptr, base); | |
| ],[ac_c99_inttypes_wchar_t_tr1=yes], | |
| [ac_c99_inttypes_wchar_t_tr1=no]) | |
| AC_MSG_RESULT($ac_c99_inttypes_wchar_t_tr1) | |
| fi | |
| if test x"$ac_c99_inttypes_wchar_t_tr1" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_C99_INTTYPES_WCHAR_T_TR1, 1, | |
| [Define if wchar_t C99 functions in <inttypes.h> should be | |
| imported in <tr1/cinttypes> in namespace std::tr1.]) | |
| fi | |
| # Check for the existence of the <stdbool.h> header. | |
| AC_CHECK_HEADERS(stdbool.h) | |
| # Check for the existence of the <stdalign.h> header. | |
| AC_CHECK_HEADERS(stdalign.h) | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check for uchar.h and usability. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_UCHAR_H], [ | |
| # Test uchar.h. | |
| AC_CHECK_HEADERS(uchar.h, ac_has_uchar_h=yes, ac_has_uchar_h=no) | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -std=c++11" | |
| if test x"$ac_has_uchar_h" = x"yes"; then | |
| AC_MSG_CHECKING([for ISO C11 support for <uchar.h>]) | |
| AC_TRY_COMPILE([#include <uchar.h> | |
| #ifdef __STDC_UTF_16__ | |
| long i = __STDC_UTF_16__; | |
| #endif | |
| #ifdef __STDC_UTF_32__ | |
| long j = __STDC_UTF_32__; | |
| #endif | |
| namespace test | |
| { | |
| using ::c16rtomb; | |
| using ::c32rtomb; | |
| using ::mbrtoc16; | |
| using ::mbrtoc32; | |
| } | |
| ], | |
| [], [ac_c11_uchar_cxx11=yes], [ac_c11_uchar_cxx11=no]) | |
| AC_MSG_RESULT($ac_c11_uchar_cxx11) | |
| else | |
| ac_c11_uchar_cxx11=no | |
| fi | |
| if test x"$ac_c11_uchar_cxx11" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_C11_UCHAR_CXX11, 1, | |
| [Define if C11 functions in <uchar.h> should be imported into | |
| namespace std in <cuchar>.]) | |
| fi | |
| CXXFLAGS="$CXXFLAGS -fchar8_t" | |
| if test x"$ac_has_uchar_h" = x"yes"; then | |
| AC_MSG_CHECKING([for c8rtomb and mbrtoc8 in <uchar.h> with -fchar8_t]) | |
| AC_TRY_COMPILE([#include <uchar.h> | |
| namespace test | |
| { | |
| using ::c8rtomb; | |
| using ::mbrtoc8; | |
| } | |
| ], | |
| [], [ac_uchar_c8rtomb_mbrtoc8_fchar8_t=yes], | |
| [ac_uchar_c8rtomb_mbrtoc8_fchar8_t=no]) | |
| AC_MSG_RESULT($ac_uchar_c8rtomb_mbrtoc8_fchar8_t) | |
| else | |
| ac_uchar_c8rtomb_mbrtoc8_fchar8_t=no | |
| fi | |
| if test x"$ac_uchar_c8rtomb_mbrtoc8_fchar8_t" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_UCHAR_C8RTOMB_MBRTOC8_FCHAR8_T, 1, | |
| [Define if c8rtomb and mbrtoc8 functions in <uchar.h> should be | |
| imported into namespace std in <cuchar> for -fchar8_t.]) | |
| fi | |
| CXXFLAGS="$CXXFLAGS -std=c++20" | |
| if test x"$ac_has_uchar_h" = x"yes"; then | |
| AC_MSG_CHECKING([for c8rtomb and mbrtoc8 in <uchar.h> with -std=c++20]) | |
| AC_TRY_COMPILE([#include <uchar.h> | |
| namespace test | |
| { | |
| using ::c8rtomb; | |
| using ::mbrtoc8; | |
| } | |
| ], | |
| [], [ac_uchar_c8rtomb_mbrtoc8_cxx20=yes], | |
| [ac_uchar_c8rtomb_mbrtoc8_cxx20=no]) | |
| AC_MSG_RESULT($ac_uchar_c8rtomb_mbrtoc8_cxx20) | |
| else | |
| ac_uchar_c8rtomb_mbrtoc8_cxx20=no | |
| fi | |
| if test x"$ac_uchar_c8rtomb_mbrtoc8_cxx20" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_UCHAR_C8RTOMB_MBRTOC8_CXX20, 1, | |
| [Define if c8rtomb and mbrtoc8 functions in <uchar.h> should be | |
| imported into namespace std in <cuchar> for C++20.]) | |
| fi | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether "/dev/random" and "/dev/urandom" are available for | |
| dnl class std::random_device from C++ 2011 [rand.device], and | |
| dnl random_device of "TR1" (Chapter 5.1, "Random number generation"). | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_DEV_RANDOM], [ | |
| AC_CACHE_CHECK([for "/dev/random" and "/dev/urandom" for std::random_device], | |
| glibcxx_cv_dev_random, [ | |
| if test -r /dev/random && test -r /dev/urandom; then | |
| ## For MSys environment the test above is detected as false-positive | |
| ## on mingw-targets. So disable it explicitly for them. | |
| case ${target_os} in | |
| *mingw*) glibcxx_cv_dev_random=no ;; | |
| *) glibcxx_cv_dev_random=yes ;; | |
| esac | |
| else | |
| glibcxx_cv_dev_random=no; | |
| fi | |
| ]) | |
| if test x"$glibcxx_cv_dev_random" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_DEV_RANDOM, 1, | |
| [Define if /dev/random and /dev/urandom are available for | |
| std::random_device.]) | |
| AC_DEFINE(_GLIBCXX_USE_RANDOM_TR1, 1, | |
| [Define if /dev/random and /dev/urandom are available for | |
| the random_device of TR1 (Chapter 5.1).]) | |
| fi | |
| ]) | |
| dnl | |
| dnl Compute the EOF, SEEK_CUR, and SEEK_END integer constants. | |
| dnl | |
| AC_DEFUN([GLIBCXX_COMPUTE_STDIO_INTEGER_CONSTANTS], [ | |
| if test "$is_hosted" = yes; then | |
| AC_CACHE_CHECK([for the value of EOF], glibcxx_cv_stdio_eof, [ | |
| AC_COMPUTE_INT([glibcxx_cv_stdio_eof], [[EOF]], | |
| [#include <stdio.h>], | |
| [AC_MSG_ERROR([computing EOF failed])]) | |
| ]) | |
| AC_DEFINE_UNQUOTED(_GLIBCXX_STDIO_EOF, $glibcxx_cv_stdio_eof, | |
| [Define to the value of the EOF integer constant.]) | |
| AC_CACHE_CHECK([for the value of SEEK_CUR], glibcxx_cv_stdio_seek_cur, [ | |
| AC_COMPUTE_INT([glibcxx_cv_stdio_seek_cur], [[SEEK_CUR]], | |
| [#include <stdio.h>], | |
| [AC_MSG_ERROR([computing SEEK_CUR failed])]) | |
| ]) | |
| AC_DEFINE_UNQUOTED(_GLIBCXX_STDIO_SEEK_CUR, $glibcxx_cv_stdio_seek_cur, | |
| [Define to the value of the SEEK_CUR integer constant.]) | |
| AC_CACHE_CHECK([for the value of SEEK_END], glibcxx_cv_stdio_seek_end, [ | |
| AC_COMPUTE_INT([glibcxx_cv_stdio_seek_end], [[SEEK_END]], | |
| [#include <stdio.h>], | |
| [AC_MSG_ERROR([computing SEEK_END failed])]) | |
| ]) | |
| AC_DEFINE_UNQUOTED(_GLIBCXX_STDIO_SEEK_END, $glibcxx_cv_stdio_seek_end, | |
| [Define to the value of the SEEK_END integer constant.]) | |
| fi | |
| ]) | |
| dnl | |
| dnl Check whether required C++ overloads are present in <stdio.h>. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_STDIO_PROTO], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| # Use C++11 because a conforming <stdio.h> won't define gets for C++14, | |
| # and we don't need a declaration for C++14 anyway. | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -std=gnu++11" | |
| AC_CACHE_CHECK([for gets declaration], glibcxx_cv_gets, [ | |
| AC_COMPILE_IFELSE([AC_LANG_SOURCE( | |
| [#include <stdio.h> | |
| namespace test | |
| { | |
| using ::gets; | |
| } | |
| ])], | |
| [glibcxx_cv_gets=yes], | |
| [glibcxx_cv_gets=no] | |
| )]) | |
| if test $glibcxx_cv_gets = yes; then | |
| AC_DEFINE(HAVE_GETS, 1, [Define if gets is available in <stdio.h> before C++14.]) | |
| fi | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether required C++11 overloads for floating point and integral | |
| dnl types are present in <math.h>. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_MATH11_PROTO], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -std=c++11" | |
| case "$host" in | |
| *-*-solaris2.*) | |
| # Solaris 12 Build 86, Solaris 11.3 SRU 3.6, and Solaris 10 Patch | |
| # 11996[67]-02 introduced the C++11 <math.h> floating point overloads. | |
| AC_CACHE_CHECK([for C++11 <math.h> floating point overloads], | |
| glibcxx_cv_math11_fp_overload, [ | |
| AC_COMPILE_IFELSE([AC_LANG_SOURCE( | |
| [#include <math.h> | |
| #undef isfinite | |
| namespace std { | |
| inline bool isfinite(float __x) | |
| { return __builtin_isfinite(__x); } | |
| } | |
| ])], | |
| [glibcxx_cv_math11_fp_overload=no], | |
| [glibcxx_cv_math11_fp_overload=yes] | |
| )]) | |
| # autoheader cannot handle indented templates. | |
| AH_VERBATIM([__CORRECT_ISO_CPP11_MATH_H_PROTO_FP], | |
| [/* Define if all C++11 floating point overloads are available in <math.h>. */ | |
| #if __cplusplus >= 201103L | |
| #undef __CORRECT_ISO_CPP11_MATH_H_PROTO_FP | |
| #endif]) | |
| if test $glibcxx_cv_math11_fp_overload = yes; then | |
| AC_DEFINE(__CORRECT_ISO_CPP11_MATH_H_PROTO_FP) | |
| fi | |
| # Solaris 12 Build 90, Solaris 11.3 SRU 5.6, and Solaris 10 Patch | |
| # 11996[67]-02 introduced the C++11 <math.h> integral type overloads. | |
| AC_CACHE_CHECK([for C++11 <math.h> integral type overloads], | |
| glibcxx_cv_math11_int_overload, [ | |
| AC_COMPILE_IFELSE([AC_LANG_SOURCE( | |
| [#include <math.h> | |
| namespace std { | |
| template<typename _Tp> | |
| struct __is_integer; | |
| template<> | |
| struct __is_integer<int> | |
| { | |
| enum { __value = 1 }; | |
| }; | |
| } | |
| namespace __gnu_cxx { | |
| template<bool, typename> | |
| struct __enable_if; | |
| template<typename _Tp> | |
| struct __enable_if<true, _Tp> | |
| { typedef _Tp __type; }; | |
| } | |
| namespace std { | |
| template<typename _Tp> | |
| constexpr typename __gnu_cxx::__enable_if | |
| <__is_integer<_Tp>::__value, double>::__type | |
| log2(_Tp __x) | |
| { return __builtin_log2(__x); } | |
| } | |
| int | |
| main (void) | |
| { | |
| int i = 1000; | |
| return std::log2(i); | |
| } | |
| ])], | |
| [glibcxx_cv_math11_int_overload=no], | |
| [glibcxx_cv_math11_int_overload=yes] | |
| )]) | |
| # autoheader cannot handle indented templates. | |
| AH_VERBATIM([__CORRECT_ISO_CPP11_MATH_H_PROTO_INT], | |
| [/* Define if all C++11 integral type overloads are available in <math.h>. */ | |
| #if __cplusplus >= 201103L | |
| #undef __CORRECT_ISO_CPP11_MATH_H_PROTO_INT | |
| #endif]) | |
| if test $glibcxx_cv_math11_int_overload = yes; then | |
| AC_DEFINE(__CORRECT_ISO_CPP11_MATH_H_PROTO_INT) | |
| fi | |
| ;; | |
| *) | |
| # If <math.h> defines the obsolete isinf(double) and isnan(double) | |
| # functions (instead of or as well as the C99 generic macros) then we | |
| # can't define std::isinf(double) and std::isnan(double) in <cmath> | |
| # and must use the ones from <math.h> instead. | |
| AC_CACHE_CHECK([for obsolete isinf function in <math.h>], | |
| glibcxx_cv_obsolete_isinf, [ | |
| AC_COMPILE_IFELSE([AC_LANG_SOURCE( | |
| [#define _GLIBCXX_INCLUDE_NEXT_C_HEADERS | |
| #include <math.h> | |
| #undef isinf | |
| namespace std { | |
| using ::isinf; | |
| bool isinf(float); | |
| bool isinf(long double); | |
| } | |
| using std::isinf; | |
| bool b = isinf(0.0); | |
| ])], | |
| [glibcxx_cv_obsolete_isinf=yes], | |
| [glibcxx_cv_obsolete_isinf=no] | |
| )]) | |
| if test $glibcxx_cv_obsolete_isinf = yes; then | |
| AC_DEFINE(HAVE_OBSOLETE_ISINF, 1, | |
| [Define if <math.h> defines obsolete isinf function.]) | |
| fi | |
| AC_CACHE_CHECK([for obsolete isnan function in <math.h>], | |
| glibcxx_cv_obsolete_isnan, [ | |
| AC_COMPILE_IFELSE([AC_LANG_SOURCE( | |
| [#define _GLIBCXX_INCLUDE_NEXT_C_HEADERS | |
| #include <math.h> | |
| #undef isnan | |
| namespace std { | |
| using ::isnan; | |
| bool isnan(float); | |
| bool isnan(long double); | |
| } | |
| using std::isnan; | |
| bool b = isnan(0.0); | |
| ])], | |
| [glibcxx_cv_obsolete_isnan=yes], | |
| [glibcxx_cv_obsolete_isnan=no] | |
| )]) | |
| if test $glibcxx_cv_obsolete_isnan = yes; then | |
| AC_DEFINE(HAVE_OBSOLETE_ISNAN, 1, | |
| [Define if <math.h> defines obsolete isnan function.]) | |
| fi | |
| ;; | |
| esac | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check for what type of C headers to use. | |
| dnl | |
| dnl --enable-cheaders= [does stuff]. | |
| dnl --disable-cheaders [does not do anything, really]. | |
| dnl + Usage: GLIBCXX_ENABLE_CHEADERS[(DEFAULT)] | |
| dnl Where DEFAULT is either 'c' or 'c_global' or 'c_std'. | |
| dnl | |
| dnl To use the obsolete 'c_std' headers use --enable-cheaders-obsolete as | |
| dnl well as --enable-cheaders=c_std, otherwise configure will fail. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_CHEADERS], [ | |
| GLIBCXX_ENABLE(cheaders-obsolete,no,, | |
| [allow use of obsolete "C" headers for g++]) | |
| GLIBCXX_ENABLE(cheaders,$1,[[[=KIND]]], | |
| [construct "C" headers for g++], [permit c|c_global|c_std]) | |
| AC_MSG_NOTICE("C" header strategy set to $enable_cheaders) | |
| if test $enable_cheaders = c_std ; then | |
| AC_MSG_WARN([the --enable-cheaders=c_std configuration is obsolete, c_global should be used instead]) | |
| AC_MSG_WARN([if you are unable to use c_global please report a bug or inform libstdc++@gcc.gnu.org]) | |
| if test $enable_cheaders_obsolete != yes ; then | |
| AC_MSG_ERROR(use --enable-cheaders-obsolete to use c_std "C" headers) | |
| fi | |
| fi | |
| C_INCLUDE_DIR='${glibcxx_srcdir}/include/'$enable_cheaders | |
| # Allow overrides to configure.host here. | |
| if test $enable_cheaders = c_global; then | |
| c_compatibility=yes | |
| fi | |
| AC_SUBST(C_INCLUDE_DIR) | |
| GLIBCXX_CONDITIONAL(GLIBCXX_C_HEADERS_C, test $enable_cheaders = c) | |
| GLIBCXX_CONDITIONAL(GLIBCXX_C_HEADERS_C_STD, test $enable_cheaders = c_std) | |
| GLIBCXX_CONDITIONAL(GLIBCXX_C_HEADERS_C_GLOBAL, test $enable_cheaders = c_global) | |
| GLIBCXX_CONDITIONAL(GLIBCXX_C_HEADERS_COMPATIBILITY, test $c_compatibility = yes) | |
| ]) | |
| dnl | |
| dnl Check for which locale library to use. The choice is mapped to | |
| dnl a subdirectory of config/locale. | |
| dnl | |
| dnl Default is generic. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_CLOCALE], [ | |
| GLIBCXX_ENABLE(clocale,auto,[[[=MODEL]]], | |
| [use MODEL for target locale package], | |
| [permit generic|gnu|ieee_1003.1-2001|newlib|yes|no|auto]) | |
| # Deal with gettext issues. Default to not using it (=no) until we detect | |
| # support for it later. Let the user turn it off via --e/d, but let that | |
| # default to on for easier handling. | |
| USE_NLS=no | |
| AC_ARG_ENABLE(nls, | |
| AC_HELP_STRING([--enable-nls],[use Native Language Support (default)]), | |
| [], | |
| [enable_nls=yes]) | |
| # Either a known package, or "auto" | |
| if test $enable_clocale = no || test $enable_clocale = yes; then | |
| enable_clocale=auto | |
| fi | |
| enable_clocale_flag=$enable_clocale | |
| # Probe for locale model to use if none specified. | |
| # Default to "generic". | |
| if test $enable_clocale_flag = auto; then | |
| case ${target_os} in | |
| linux* | gnu* | kfreebsd*-gnu | knetbsd*-gnu) | |
| enable_clocale_flag=gnu | |
| ;; | |
| darwin*) | |
| enable_clocale_flag=darwin | |
| ;; | |
| vxworks*) | |
| enable_clocale_flag=vxworks | |
| ;; | |
| dragonfly* | freebsd*) | |
| enable_clocale_flag=dragonfly | |
| ;; | |
| openbsd*) | |
| enable_clocale_flag=newlib | |
| ;; | |
| *) | |
| if test x"$with_newlib" = x"yes"; then | |
| enable_clocale_flag=newlib | |
| else | |
| enable_clocale_flag=generic | |
| fi | |
| ;; | |
| esac | |
| fi | |
| # Sanity check model, and test for special functionality. | |
| if test $enable_clocale_flag = gnu; then | |
| AC_EGREP_CPP([_GLIBCXX_ok], [ | |
| #include <features.h> | |
| #if (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 3)) && !defined(__UCLIBC__) | |
| _GLIBCXX_ok | |
| #endif | |
| ], enable_clocale_flag=gnu, enable_clocale_flag=generic) | |
| # Set it to scream when it hurts. | |
| ac_save_CFLAGS="$CFLAGS" | |
| CFLAGS="-Wimplicit-function-declaration -Werror" | |
| # Use strxfrm_l if available. | |
| AC_TRY_COMPILE([#define _GNU_SOURCE 1 | |
| #include <string.h> | |
| #include <locale.h>], | |
| [char s[128]; __locale_t loc; strxfrm_l(s, "C", 5, loc);], | |
| AC_DEFINE(HAVE_STRXFRM_L, 1, | |
| [Define if strxfrm_l is available in <string.h>.]),) | |
| # Use strerror_l if available. | |
| AC_TRY_COMPILE([#define _GNU_SOURCE 1 | |
| #include <string.h> | |
| #include <locale.h>], | |
| [__locale_t loc; strerror_l(5, loc);], | |
| AC_DEFINE(HAVE_STRERROR_L, 1, | |
| [Define if strerror_l is available in <string.h>.]),) | |
| CFLAGS="$ac_save_CFLAGS" | |
| fi | |
| # Perhaps use strerror_r if available, and strerror_l isn't. | |
| ac_save_CFLAGS="$CFLAGS" | |
| CFLAGS="-Wimplicit-function-declaration -Werror" | |
| AC_TRY_COMPILE([#define _GNU_SOURCE 1 | |
| #include <string.h> | |
| #include <locale.h>], | |
| [char s[128]; strerror_r(5, s, 128);], | |
| AC_DEFINE(HAVE_STRERROR_R, 1, | |
| [Define if strerror_r is available in <string.h>.]),) | |
| CFLAGS="$ac_save_CFLAGS" | |
| # Set configure bits for specified locale package | |
| AC_MSG_CHECKING([for C locale to use]) | |
| case ${enable_clocale_flag} in | |
| generic) | |
| AC_MSG_RESULT(generic) | |
| CLOCALE_H=config/locale/generic/c_locale.h | |
| CLOCALE_CC=config/locale/generic/c_locale.cc | |
| CCODECVT_CC=config/locale/generic/codecvt_members.cc | |
| CCOLLATE_CC=config/locale/generic/collate_members.cc | |
| CCTYPE_CC=config/locale/generic/ctype_members.cc | |
| CMESSAGES_H=config/locale/generic/messages_members.h | |
| CMESSAGES_CC=config/locale/generic/messages_members.cc | |
| CMONEY_CC=config/locale/generic/monetary_members.cc | |
| CNUMERIC_CC=config/locale/generic/numeric_members.cc | |
| CTIME_H=config/locale/generic/time_members.h | |
| CTIME_CC=config/locale/generic/time_members.cc | |
| CLOCALE_INTERNAL_H=config/locale/generic/c++locale_internal.h | |
| ;; | |
| darwin) | |
| AC_MSG_RESULT(darwin) | |
| CLOCALE_H=config/locale/generic/c_locale.h | |
| CLOCALE_CC=config/locale/generic/c_locale.cc | |
| CCODECVT_CC=config/locale/generic/codecvt_members.cc | |
| CCOLLATE_CC=config/locale/generic/collate_members.cc | |
| CCTYPE_CC=config/locale/darwin/ctype_members.cc | |
| CMESSAGES_H=config/locale/generic/messages_members.h | |
| CMESSAGES_CC=config/locale/generic/messages_members.cc | |
| CMONEY_CC=config/locale/generic/monetary_members.cc | |
| CNUMERIC_CC=config/locale/generic/numeric_members.cc | |
| CTIME_H=config/locale/generic/time_members.h | |
| CTIME_CC=config/locale/generic/time_members.cc | |
| CLOCALE_INTERNAL_H=config/locale/generic/c++locale_internal.h | |
| ;; | |
| vxworks) | |
| AC_MSG_RESULT(vxworks) | |
| CLOCALE_H=config/locale/generic/c_locale.h | |
| CLOCALE_CC=config/locale/generic/c_locale.cc | |
| CCODECVT_CC=config/locale/generic/codecvt_members.cc | |
| CCOLLATE_CC=config/locale/generic/collate_members.cc | |
| CCTYPE_CC=config/locale/vxworks/ctype_members.cc | |
| CMESSAGES_H=config/locale/generic/messages_members.h | |
| CMESSAGES_CC=config/locale/generic/messages_members.cc | |
| CMONEY_CC=config/locale/generic/monetary_members.cc | |
| CNUMERIC_CC=config/locale/generic/numeric_members.cc | |
| CTIME_H=config/locale/generic/time_members.h | |
| CTIME_CC=config/locale/generic/time_members.cc | |
| CLOCALE_INTERNAL_H=config/locale/generic/c++locale_internal.h | |
| ;; | |
| dragonfly) | |
| AC_MSG_RESULT(dragonfly or freebsd) | |
| CLOCALE_H=config/locale/dragonfly/c_locale.h | |
| CLOCALE_CC=config/locale/dragonfly/c_locale.cc | |
| CCODECVT_CC=config/locale/dragonfly/codecvt_members.cc | |
| CCOLLATE_CC=config/locale/dragonfly/collate_members.cc | |
| CCTYPE_CC=config/locale/dragonfly/ctype_members.cc | |
| CMESSAGES_H=config/locale/generic/messages_members.h | |
| CMESSAGES_CC=config/locale/generic/messages_members.cc | |
| CMONEY_CC=config/locale/dragonfly/monetary_members.cc | |
| CNUMERIC_CC=config/locale/dragonfly/numeric_members.cc | |
| CTIME_H=config/locale/dragonfly/time_members.h | |
| CTIME_CC=config/locale/dragonfly/time_members.cc | |
| CLOCALE_INTERNAL_H=config/locale/generic/c++locale_internal.h | |
| ;; | |
| gnu) | |
| AC_MSG_RESULT(gnu) | |
| # Declare intention to use gettext, and add support for specific | |
| # languages. | |
| # For some reason, ALL_LINGUAS has to be before AM-GNU-GETTEXT | |
| ALL_LINGUAS="de fr" | |
| # Don't call AM-GNU-GETTEXT here. Instead, assume glibc. | |
| AC_CHECK_PROG(check_msgfmt, msgfmt, yes, no) | |
| if test x"$check_msgfmt" = x"yes" && test x"$enable_nls" = x"yes"; then | |
| USE_NLS=yes | |
| fi | |
| # Export the build objects. | |
| for ling in $ALL_LINGUAS; do \ | |
| glibcxx_MOFILES="$glibcxx_MOFILES $ling.mo"; \ | |
| glibcxx_POFILES="$glibcxx_POFILES $ling.po"; \ | |
| done | |
| AC_SUBST(glibcxx_MOFILES) | |
| AC_SUBST(glibcxx_POFILES) | |
| CLOCALE_H=config/locale/gnu/c_locale.h | |
| CLOCALE_CC=config/locale/gnu/c_locale.cc | |
| CCODECVT_CC=config/locale/gnu/codecvt_members.cc | |
| CCOLLATE_CC=config/locale/gnu/collate_members.cc | |
| CCTYPE_CC=config/locale/gnu/ctype_members.cc | |
| CMESSAGES_H=config/locale/gnu/messages_members.h | |
| CMESSAGES_CC=config/locale/gnu/messages_members.cc | |
| CMONEY_CC=config/locale/gnu/monetary_members.cc | |
| CNUMERIC_CC=config/locale/gnu/numeric_members.cc | |
| CTIME_H=config/locale/gnu/time_members.h | |
| CTIME_CC=config/locale/gnu/time_members.cc | |
| CLOCALE_INTERNAL_H=config/locale/gnu/c++locale_internal.h | |
| ;; | |
| ieee_1003.1-2001) | |
| AC_MSG_RESULT(IEEE 1003.1) | |
| CLOCALE_H=config/locale/ieee_1003.1-2001/c_locale.h | |
| CLOCALE_CC=config/locale/ieee_1003.1-2001/c_locale.cc | |
| CCODECVT_CC=config/locale/generic/codecvt_members.cc | |
| CCOLLATE_CC=config/locale/generic/collate_members.cc | |
| CCTYPE_CC=config/locale/generic/ctype_members.cc | |
| CMESSAGES_H=config/locale/ieee_1003.1-2001/messages_members.h | |
| CMESSAGES_CC=config/locale/ieee_1003.1-2001/messages_members.cc | |
| CMONEY_CC=config/locale/generic/monetary_members.cc | |
| CNUMERIC_CC=config/locale/generic/numeric_members.cc | |
| CTIME_H=config/locale/generic/time_members.h | |
| CTIME_CC=config/locale/generic/time_members.cc | |
| CLOCALE_INTERNAL_H=config/locale/generic/c++locale_internal.h | |
| ;; | |
| newlib) | |
| AC_MSG_RESULT(newlib) | |
| CLOCALE_H=config/locale/generic/c_locale.h | |
| CLOCALE_CC=config/locale/generic/c_locale.cc | |
| CCODECVT_CC=config/locale/generic/codecvt_members.cc | |
| CCOLLATE_CC=config/locale/generic/collate_members.cc | |
| CCTYPE_CC=config/locale/newlib/ctype_members.cc | |
| CMESSAGES_H=config/locale/generic/messages_members.h | |
| CMESSAGES_CC=config/locale/generic/messages_members.cc | |
| CMONEY_CC=config/locale/generic/monetary_members.cc | |
| CNUMERIC_CC=config/locale/generic/numeric_members.cc | |
| CTIME_H=config/locale/generic/time_members.h | |
| CTIME_CC=config/locale/generic/time_members.cc | |
| CLOCALE_INTERNAL_H=config/locale/generic/c++locale_internal.h | |
| ;; | |
| esac | |
| # This is where the testsuite looks for locale catalogs, using the | |
| # -DLOCALEDIR define during testsuite compilation. | |
| glibcxx_localedir=${glibcxx_builddir}/po/share/locale | |
| AC_SUBST(glibcxx_localedir) | |
| # A standalone libintl (e.g., GNU libintl) may be in use. | |
| if test $USE_NLS = yes; then | |
| AC_CHECK_HEADERS([libintl.h], [], USE_NLS=no) | |
| AC_SEARCH_LIBS(gettext, intl, [], USE_NLS=no) | |
| fi | |
| if test $USE_NLS = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_NLS, 1, | |
| [Define if NLS translations are to be used.]) | |
| fi | |
| AC_SUBST(USE_NLS) | |
| AC_SUBST(CLOCALE_H) | |
| AC_SUBST(CMESSAGES_H) | |
| AC_SUBST(CCODECVT_CC) | |
| AC_SUBST(CCOLLATE_CC) | |
| AC_SUBST(CCTYPE_CC) | |
| AC_SUBST(CMESSAGES_CC) | |
| AC_SUBST(CMONEY_CC) | |
| AC_SUBST(CNUMERIC_CC) | |
| AC_SUBST(CTIME_H) | |
| AC_SUBST(CTIME_CC) | |
| AC_SUBST(CLOCALE_CC) | |
| AC_SUBST(CLOCALE_INTERNAL_H) | |
| ]) | |
| dnl | |
| dnl Check for which std::allocator base class to use. The choice is | |
| dnl mapped from a subdirectory of include/ext. | |
| dnl | |
| dnl Default is new. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_ALLOCATOR], [ | |
| AC_MSG_CHECKING([for std::allocator base class]) | |
| GLIBCXX_ENABLE(libstdcxx-allocator,auto,[[[=KIND]]], | |
| [use KIND for target std::allocator base], | |
| [permit new|malloc|yes|no|auto]) | |
| # If they didn't use this option switch, or if they specified --enable | |
| # with no specific model, we'll have to look for one. If they | |
| # specified --disable (???), do likewise. | |
| if test $enable_libstdcxx_allocator = no || | |
| test $enable_libstdcxx_allocator = yes; | |
| then | |
| enable_libstdcxx_allocator=auto | |
| fi | |
| # Either a known package, or "auto". Auto implies the default choice | |
| # for a particular platform. | |
| enable_libstdcxx_allocator_flag=$enable_libstdcxx_allocator | |
| # Probe for host-specific support if no specific model is specified. | |
| # Default to "new". | |
| if test $enable_libstdcxx_allocator_flag = auto; then | |
| case ${target_os} in | |
| linux* | gnu* | kfreebsd*-gnu | knetbsd*-gnu) | |
| enable_libstdcxx_allocator_flag=new | |
| ;; | |
| *) | |
| enable_libstdcxx_allocator_flag=new | |
| ;; | |
| esac | |
| fi | |
| AC_MSG_RESULT($enable_libstdcxx_allocator_flag) | |
| # Set configure bits for specified locale package | |
| case ${enable_libstdcxx_allocator_flag} in | |
| malloc) | |
| ALLOCATOR_H=config/allocator/malloc_allocator_base.h | |
| ALLOCATOR_NAME=__gnu_cxx::malloc_allocator | |
| ;; | |
| new) | |
| ALLOCATOR_H=config/allocator/new_allocator_base.h | |
| ALLOCATOR_NAME=__gnu_cxx::new_allocator | |
| ;; | |
| esac | |
| GLIBCXX_CONDITIONAL(ENABLE_ALLOCATOR_NEW, | |
| test $enable_libstdcxx_allocator_flag = new) | |
| AC_SUBST(ALLOCATOR_H) | |
| AC_SUBST(ALLOCATOR_NAME) | |
| ]) | |
| dnl | |
| dnl Check for whether the Boost-derived checks should be turned on. | |
| dnl | |
| dnl --enable-concept-checks turns them on. | |
| dnl --disable-concept-checks leaves them off. | |
| dnl + Usage: GLIBCXX_ENABLE_CONCEPT_CHECKS[(DEFAULT)] | |
| dnl Where DEFAULT is either `yes' or `no'. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_CONCEPT_CHECKS], [ | |
| GLIBCXX_ENABLE(concept-checks,$1,,[use Boost-derived template checks]) | |
| if test $enable_concept_checks = yes; then | |
| AC_DEFINE(_GLIBCXX_CONCEPT_CHECKS, 1, | |
| [Define to use concept checking code from the boost libraries.]) | |
| fi | |
| ]) | |
| dnl | |
| dnl Use extern templates. | |
| dnl | |
| dnl --enable-extern-template defines _GLIBCXX_EXTERN_TEMPLATE to 1 | |
| dnl --disable-extern-template defines _GLIBCXX_EXTERN_TEMPLATE to 0 | |
| dnl + Usage: GLIBCXX_ENABLE_TEMPLATE[(DEFAULT)] | |
| dnl Where DEFAULT is `yes' or `no'. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_EXTERN_TEMPLATE], [ | |
| GLIBCXX_ENABLE(extern-template,$1,,[enable extern template]) | |
| AC_MSG_CHECKING([for extern template support]) | |
| AC_MSG_RESULT([$enable_extern_template]) | |
| GLIBCXX_CONDITIONAL(ENABLE_EXTERN_TEMPLATE, test $enable_extern_template = yes) | |
| ]) | |
| dnl | |
| dnl Use vtable verification. | |
| dnl | |
| dnl --enable-vtable-verify defines _GLIBCXX_VTABLE_VERIFY to 1 | |
| dnl --disable-vtable-verify defines _GLIBCXX_VTABLE_VERIFY to 0 | |
| dnl + Usage: GLIBCXX_ENABLE_VTABLE_VERIFY[(DEFAULT)] | |
| dnl Where DEFAULT is `yes' or `no'. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_VTABLE_VERIFY], [ | |
| GLIBCXX_ENABLE(vtable-verify,$1,,[enable vtable verify]) | |
| AC_MSG_CHECKING([for vtable verify support]) | |
| AC_MSG_RESULT([$enable_vtable_verify]) | |
| vtv_cygmin=no | |
| if test $enable_vtable_verify = yes; then | |
| case ${target_os} in | |
| cygwin*|mingw32*) | |
| VTV_CXXFLAGS="-fvtable-verify=std -Wl,-lvtv,-u_vtable_map_vars_start,-u_vtable_map_vars_end" | |
| VTV_CXXLINKFLAGS="-L${toplevel_builddir}/libvtv/.libs -Wl,--rpath -Wl,${toplevel_builddir}/libvtv/.libs" | |
| vtv_cygmin=yes | |
| ;; | |
| darwin*) | |
| VTV_CXXFLAGS="-fvtable-verify=std -Wl,-u,_vtable_map_vars_start -Wl,-u,_vtable_map_vars_end" | |
| VTV_CXXLINKFLAGS="-L${toplevel_builddir}/libvtv/.libs -Wl,-rpath,${toplevel_builddir}/libvtv/.libs" | |
| ;; | |
| solaris2*) | |
| VTV_CXXFLAGS="-fvtable-verify=std -Wl,-u_vtable_map_vars_start,-u_vtable_map_vars_end" | |
| VTV_CXXLINKFLAGS="-L${toplevel_builddir}/libvtv/.libs -Wl,-R -Wl,${toplevel_builddir}/libvtv/.libs" | |
| ;; | |
| *) | |
| VTV_CXXFLAGS="-fvtable-verify=std -Wl,-u_vtable_map_vars_start,-u_vtable_map_vars_end" | |
| VTV_CXXLINKFLAGS="-L${toplevel_builddir}/libvtv/.libs -Wl,--rpath -Wl,${toplevel_builddir}/libvtv/.libs" | |
| ;; | |
| esac | |
| VTV_PCH_CXXFLAGS="-fvtable-verify=std" | |
| else | |
| VTV_CXXFLAGS= | |
| VTV_PCH_CXXFLAGS= | |
| VTV_CXXLINKFLAGS= | |
| fi | |
| AC_SUBST(VTV_CXXFLAGS) | |
| AC_SUBST(VTV_PCH_CXXFLAGS) | |
| AC_SUBST(VTV_CXXLINKFLAGS) | |
| AM_CONDITIONAL(VTV_CYGMIN, test x$vtv_cygmin = xyes) | |
| GLIBCXX_CONDITIONAL(ENABLE_VTABLE_VERIFY, test $enable_vtable_verify = yes) | |
| ]) | |
| dnl | |
| dnl Check for parallel mode pre-requisites, including OpenMP support. | |
| dnl | |
| dnl + Usage: GLIBCXX_ENABLE_PARALLEL | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_PARALLEL], [ | |
| enable_parallel=no; | |
| # See if configured libgomp/omp.h exists. (libgomp may be in | |
| # noconfigdirs but not explicitly disabled.) | |
| if echo " ${TARGET_CONFIGDIRS} " | grep " libgomp " > /dev/null 2>&1 ; then | |
| enable_parallel=yes; | |
| else | |
| AC_MSG_NOTICE([target-libgomp not built]) | |
| fi | |
| AC_MSG_CHECKING([for parallel mode support]) | |
| AC_MSG_RESULT([$enable_parallel]) | |
| ]) | |
| dnl | |
| dnl Check for which I/O library to use: stdio and POSIX, or pure stdio. | |
| dnl | |
| dnl Default is stdio_posix. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_CSTDIO], [ | |
| AC_MSG_CHECKING([for underlying I/O to use]) | |
| GLIBCXX_ENABLE(cstdio,stdio,[[[=PACKAGE]]], | |
| [use target-specific I/O package], [permit stdio|stdio_posix|stdio_pure]) | |
| # The only available I/O model is based on stdio, via basic_file_stdio. | |
| # The default "stdio" is actually "stdio + POSIX" because it uses fdopen(3) | |
| # to get a file descriptor and then uses read(3) and write(3) with it. | |
| # The "stdio_pure" model doesn't use fdopen and only uses FILE* for I/O. | |
| case ${enable_cstdio} in | |
| stdio*) | |
| CSTDIO_H=config/io/c_io_stdio.h | |
| BASIC_FILE_H=config/io/basic_file_stdio.h | |
| BASIC_FILE_CC=config/io/basic_file_stdio.cc | |
| if test "x$enable_cstdio" = "xstdio_pure" ; then | |
| AC_MSG_RESULT([stdio (without POSIX read/write)]) | |
| AC_DEFINE(_GLIBCXX_USE_STDIO_PURE, 1, | |
| [Define to restrict std::__basic_file<> to stdio APIs.]) | |
| else | |
| AC_MSG_RESULT([stdio (with POSIX read/write)]) | |
| fi | |
| ;; | |
| esac | |
| AC_SUBST(CSTDIO_H) | |
| AC_SUBST(BASIC_FILE_H) | |
| AC_SUBST(BASIC_FILE_CC) | |
| ]) | |
| dnl | |
| dnl Check for "unusual" flags to pass to the compiler while building. | |
| dnl | |
| dnl --enable-cxx-flags='-foo -bar -baz' is a general method for passing | |
| dnl experimental flags such as -fpch, -fIMI, -Dfloat=char, etc. | |
| dnl --disable-cxx-flags passes nothing. | |
| dnl + See http://gcc.gnu.org/ml/libstdc++/2000-q2/msg00131.html | |
| dnl http://gcc.gnu.org/ml/libstdc++/2000-q2/msg00284.html | |
| dnl http://gcc.gnu.org/ml/libstdc++/2000-q1/msg00035.html | |
| dnl + Usage: GLIBCXX_ENABLE_CXX_FLAGS(default flags) | |
| dnl If "default flags" is an empty string, the effect is the same | |
| dnl as --disable or --enable=no. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_CXX_FLAGS], [dnl | |
| AC_MSG_CHECKING([for extra compiler flags for building]) | |
| GLIBCXX_ENABLE(cxx-flags,$1,[=FLAGS], | |
| [pass compiler FLAGS when building library], | |
| [case "x$enable_cxx_flags" in | |
| xno | x) enable_cxx_flags= ;; | |
| x-*) ;; | |
| *) AC_MSG_ERROR(_g_switch needs compiler flags as arguments) ;; | |
| esac]) | |
| # Run through flags (either default or command-line) and set anything | |
| # extra (e.g., #defines) that must accompany particular g++ options. | |
| if test -n "$enable_cxx_flags"; then | |
| for f in $enable_cxx_flags; do | |
| case "$f" in | |
| -fhonor-std) ;; | |
| -*) ;; | |
| *) # and we're trying to pass /what/ exactly? | |
| AC_MSG_ERROR([compiler flags start with a -]) ;; | |
| esac | |
| done | |
| # Append the additional flags to any that came from 'configure.host'. | |
| EXTRA_CXX_FLAGS="$EXTRA_CXX_FLAGS $enable_cxx_flags" | |
| fi | |
| AC_MSG_RESULT($EXTRA_CXX_FLAGS) | |
| AC_SUBST(EXTRA_CXX_FLAGS) | |
| ]) | |
| dnl | |
| dnl Check to see if debugging libraries are to be built. | |
| dnl | |
| dnl --enable-libstdcxx-debug | |
| dnl builds a separate set of debugging libraries in addition to the | |
| dnl normal (shared, static) libstdc++ binaries. | |
| dnl | |
| dnl --disable-libstdcxx-debug | |
| dnl builds only one (non-debug) version of libstdc++. | |
| dnl | |
| dnl --enable-libstdcxx-debug-flags=FLAGS | |
| dnl iff --enable-debug == yes, then use FLAGS to build the debug library. | |
| dnl | |
| dnl + Usage: GLIBCXX_ENABLE_DEBUG[(DEFAULT)] | |
| dnl Where DEFAULT is either `yes' or `no'. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_DEBUG], [ | |
| AC_MSG_CHECKING([for additional debug build]) | |
| skip_debug_build= | |
| GLIBCXX_ENABLE(libstdcxx-debug,$1,,[build extra debug library]) | |
| if test x$enable_libstdcxx_debug = xyes; then | |
| if test -f $toplevel_builddir/../stage_final \ | |
| && test -f $toplevel_builddir/../stage_current; then | |
| stage_final=`cat $toplevel_builddir/../stage_final` | |
| stage_current=`cat $toplevel_builddir/../stage_current` | |
| if test x$stage_current != x$stage_final ; then | |
| skip_debug_build=" (skipped for bootstrap stage $stage_current)" | |
| enable_libstdcxx_debug=no | |
| fi | |
| fi | |
| fi | |
| AC_MSG_RESULT($enable_libstdcxx_debug$skip_debug_build) | |
| GLIBCXX_CONDITIONAL(GLIBCXX_BUILD_DEBUG, test $enable_libstdcxx_debug = yes) | |
| ]) | |
| dnl | |
| dnl Check for explicit debug flags. | |
| dnl | |
| dnl --enable-libstdcxx-debug-flags='-O1' | |
| dnl is a general method for passing flags to be used when | |
| dnl building debug libraries with --enable-libstdcxx-debug. | |
| dnl | |
| dnl --disable-libstdcxx-debug-flags does nothing. | |
| dnl + Usage: GLIBCXX_ENABLE_DEBUG_FLAGS(default flags) | |
| dnl If "default flags" is an empty string, the effect is the same | |
| dnl as --disable or --enable=no. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_DEBUG_FLAGS], [ | |
| GLIBCXX_ENABLE(libstdcxx-debug-flags,[$1],[=FLAGS], | |
| [pass compiler FLAGS when building debug library], | |
| [case "x$enable_libstdcxx_debug_flags" in | |
| xno | x) enable_libstdcxx_debug_flags= ;; | |
| x-*) ;; | |
| *) AC_MSG_ERROR(_g_switch needs compiler flags as arguments) ;; | |
| esac]) | |
| # Option parsed, now set things appropriately | |
| DEBUG_FLAGS="$enable_libstdcxx_debug_flags" | |
| AC_SUBST(DEBUG_FLAGS) | |
| AC_MSG_NOTICE([Debug build flags set to $DEBUG_FLAGS]) | |
| ]) | |
| dnl | |
| dnl Check if the user only wants a freestanding library implementation. | |
| dnl | |
| dnl --disable-hosted-libstdcxx will turn off most of the library build, | |
| dnl installing only the headers required by [17.4.1.3] and the language | |
| dnl support library. More than that will be built (to keep the Makefiles | |
| dnl conveniently clean), but not installed. | |
| dnl | |
| dnl Also define --disable-libstdcxx-hosted as an alias for | |
| dnl --disable-hosted-libstdcxx but fail if both are given | |
| dnl and their values do not agree. | |
| dnl | |
| dnl Sets: | |
| dnl is_hosted (yes/no) | |
| dnl | |
| dnl Defines: | |
| dnl _GLIBCXX_HOSTED (always defined, either to 1 or 0) | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_HOSTED], [ | |
| AC_ARG_ENABLE([hosted-libstdcxx], | |
| AC_HELP_STRING([--disable-hosted-libstdcxx], | |
| [only build freestanding C++ runtime support]), | |
| [enable_hosted_libstdcxx_was_given=yes], | |
| [case "$host" in | |
| arm*-*-symbianelf*) | |
| enable_hosted_libstdcxx=no | |
| ;; | |
| *) | |
| case "${with_newlib}-${with_headers}" in | |
| no-no) enable_hosted_libstdcxx=no ;; | |
| *) enable_hosted_libstdcxx=yes ;; | |
| esac | |
| ;; | |
| esac]) | |
| # Because most configure args are --enable-libstdcxx-foo add an alias | |
| # of that form for --enable-hosted-libstdcxx. | |
| AC_ARG_ENABLE([libstdcxx-hosted], | |
| AC_HELP_STRING([--disable-libstdcxx-hosted], | |
| [alias for --disable-hosted-libstdcxx]), | |
| [if test "$enable_hosted_libstdcxx_was_given" = yes; then | |
| if test "$enable_hosted_libstdcxx" != "$enableval"; then | |
| AC_MSG_ERROR([--enable-libstdcxx-hosted=$enableval conflicts with --enable-hosted-libstdcxx=$enable_hosted_libstdcxx]) | |
| fi | |
| else | |
| enable_hosted_libstdcxx=${enableval} | |
| fi | |
| ],) | |
| freestanding_flags= | |
| if test "$enable_hosted_libstdcxx" = no; then | |
| AC_MSG_NOTICE([Only freestanding libraries will be built]) | |
| is_hosted=no | |
| hosted_define=0 | |
| enable_abi_check=no | |
| enable_libstdcxx_pch=no | |
| if test "x$with_headers" = xno; then | |
| freestanding_flags="-ffreestanding" | |
| fi | |
| else | |
| is_hosted=yes | |
| hosted_define=__STDC_HOSTED__ | |
| fi | |
| GLIBCXX_CONDITIONAL(GLIBCXX_HOSTED, test $is_hosted = yes) | |
| AC_DEFINE_UNQUOTED(_GLIBCXX_HOSTED, $hosted_define, | |
| [Define to 1 if a full hosted library is built, or 0 if freestanding.]) | |
| FREESTANDING_FLAGS="$freestanding_flags" | |
| AC_SUBST(FREESTANDING_FLAGS) | |
| ]) | |
| dnl | |
| dnl Check if the user wants a non-verbose library implementation. | |
| dnl | |
| dnl --disable-libstdcxx-verbose will turn off descriptive messages to | |
| dnl standard error on termination. | |
| dnl | |
| dnl Defines: | |
| dnl _GLIBCXX_VERBOSE (always defined, either to 1 or 0) | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_VERBOSE], [ | |
| AC_ARG_ENABLE([libstdcxx-verbose], | |
| AC_HELP_STRING([--disable-libstdcxx-verbose], | |
| [disable termination messages to standard error]),, | |
| [enable_libstdcxx_verbose=yes]) | |
| if test x"$enable_libstdcxx_verbose" = xyes; then | |
| verbose_define=1 | |
| else | |
| AC_MSG_NOTICE([verbose termination messages are disabled]) | |
| verbose_define=0 | |
| fi | |
| AC_DEFINE_UNQUOTED(_GLIBCXX_VERBOSE, $verbose_define, | |
| [Define to 1 if a verbose library is built, or 0 otherwise.]) | |
| ]) | |
| dnl | |
| dnl Check for template specializations for the 'long long' type. | |
| dnl The result determines only whether 'long long' I/O is enabled; things | |
| dnl like numeric_limits<> specializations are always available. | |
| dnl | |
| dnl --enable-long-long defines _GLIBCXX_USE_LONG_LONG | |
| dnl --disable-long-long leaves _GLIBCXX_USE_LONG_LONG undefined | |
| dnl + Usage: GLIBCXX_ENABLE_LONG_LONG[(DEFAULT)] | |
| dnl Where DEFAULT is either `yes' or `no'. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_LONG_LONG], [ | |
| GLIBCXX_ENABLE(long-long,$1,,[enable template specializations for 'long long']) | |
| if test $enable_long_long = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_LONG_LONG, 1, | |
| [Define if code specialized for long long should be used.]) | |
| fi | |
| AC_MSG_CHECKING([for enabled long long specializations]) | |
| AC_MSG_RESULT([$enable_long_long]) | |
| ]) | |
| dnl | |
| dnl Check for decimal floating point. | |
| dnl See: | |
| dnl http://gcc.gnu.org/onlinedocs/gcc/Decimal-Float.html#Decimal-Float | |
| dnl | |
| dnl This checks to see if the host supports decimal floating point types. | |
| dnl | |
| dnl Defines: | |
| dnl _GLIBCXX_USE_DECIMAL_FLOAT | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_DECIMAL_FLOAT], [ | |
| # Fake what AC_TRY_COMPILE does, without linking as this is | |
| # unnecessary for this test. | |
| cat > conftest.$ac_ext << EOF | |
| [#]line __oline__ "configure" | |
| int main() | |
| { | |
| _Decimal32 d1; | |
| _Decimal64 d2; | |
| _Decimal128 d3; | |
| return 0; | |
| } | |
| EOF | |
| AC_MSG_CHECKING([for ISO/IEC TR 24733 ]) | |
| if AC_TRY_EVAL(ac_compile); then | |
| AC_DEFINE(_GLIBCXX_USE_DECIMAL_FLOAT, 1, | |
| [Define if ISO/IEC TR 24733 decimal floating point types are supported on this host.]) | |
| enable_dfp=yes | |
| else | |
| enable_dfp=no | |
| fi | |
| AC_MSG_RESULT($enable_dfp) | |
| rm -f conftest* | |
| ]) | |
| dnl | |
| dnl Check for GNU 128-bit floating point type. | |
| dnl | |
| dnl Note: also checks that the type isn't a standard types. | |
| dnl | |
| dnl Defines: | |
| dnl ENABLE_FLOAT128 | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_FLOAT128], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| # Fake what AC_TRY_COMPILE does, without linking as this is | |
| # unnecessary for this test. | |
| cat > conftest.$ac_ext << EOF | |
| [#]line __oline__ "configure" | |
| template<typename T1, typename T2> | |
| struct same | |
| { typedef T2 type; }; | |
| template<typename T> | |
| struct same<T, T>; | |
| int main() | |
| { | |
| typename same<double, __float128>::type f1; | |
| typename same<long double, __float128>::type f2; | |
| } | |
| EOF | |
| AC_MSG_CHECKING([for __float128]) | |
| if AC_TRY_EVAL(ac_compile); then | |
| enable_float128=yes | |
| else | |
| enable_float128=no | |
| fi | |
| AC_MSG_RESULT($enable_float128) | |
| GLIBCXX_CONDITIONAL(ENABLE_FLOAT128, test $enable_float128 = yes) | |
| rm -f conftest* | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check for template specializations for the 'wchar_t' type. | |
| dnl | |
| dnl --enable-wchar_t defines _GLIBCXX_USE_WCHAR_T | |
| dnl --disable-wchar_t leaves _GLIBCXX_USE_WCHAR_T undefined | |
| dnl + Usage: GLIBCXX_ENABLE_WCHAR_T[(DEFAULT)] | |
| dnl Where DEFAULT is either `yes' or `no'. | |
| dnl | |
| dnl Necessary support must also be present. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_WCHAR_T], [ | |
| GLIBCXX_ENABLE(wchar_t,$1,,[enable template specializations for 'wchar_t']) | |
| # Test wchar.h for mbstate_t, which is needed for char_traits and fpos. | |
| AC_CHECK_HEADERS(wchar.h, ac_has_wchar_h=yes, ac_has_wchar_h=no) | |
| AC_MSG_CHECKING([for mbstate_t]) | |
| AC_TRY_COMPILE([#include <wchar.h>], | |
| [mbstate_t teststate;], | |
| have_mbstate_t=yes, have_mbstate_t=no) | |
| AC_MSG_RESULT($have_mbstate_t) | |
| if test x"$have_mbstate_t" = xyes; then | |
| AC_DEFINE(HAVE_MBSTATE_T,1,[Define if mbstate_t exists in wchar.h.]) | |
| fi | |
| # Test it always, for use in GLIBCXX_ENABLE_C99, together with | |
| # ac_has_wchar_h. | |
| AC_CHECK_HEADERS(wctype.h, ac_has_wctype_h=yes, ac_has_wctype_h=no) | |
| if test x"$enable_wchar_t" = x"yes"; then | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| if test x"$ac_has_wchar_h" = xyes && | |
| test x"$ac_has_wctype_h" = xyes; then | |
| AC_TRY_COMPILE([#include <wchar.h> | |
| #include <stddef.h> | |
| wint_t i; | |
| long l = WEOF; | |
| long j = WCHAR_MIN; | |
| long k = WCHAR_MAX; | |
| namespace test | |
| { | |
| using ::btowc; | |
| using ::fgetwc; | |
| using ::fgetws; | |
| using ::fputwc; | |
| using ::fputws; | |
| using ::fwide; | |
| using ::fwprintf; | |
| using ::fwscanf; | |
| using ::getwc; | |
| using ::getwchar; | |
| using ::mbrlen; | |
| using ::mbrtowc; | |
| using ::mbsinit; | |
| using ::mbsrtowcs; | |
| using ::putwc; | |
| using ::putwchar; | |
| using ::swprintf; | |
| using ::swscanf; | |
| using ::ungetwc; | |
| using ::vfwprintf; | |
| using ::vswprintf; | |
| using ::vwprintf; | |
| using ::wcrtomb; | |
| using ::wcscat; | |
| using ::wcschr; | |
| using ::wcscmp; | |
| using ::wcscoll; | |
| using ::wcscpy; | |
| using ::wcscspn; | |
| using ::wcsftime; | |
| using ::wcslen; | |
| using ::wcsncat; | |
| using ::wcsncmp; | |
| using ::wcsncpy; | |
| using ::wcspbrk; | |
| using ::wcsrchr; | |
| using ::wcsrtombs; | |
| using ::wcsspn; | |
| using ::wcsstr; | |
| using ::wcstod; | |
| using ::wcstok; | |
| using ::wcstol; | |
| using ::wcstoul; | |
| using ::wcsxfrm; | |
| using ::wctob; | |
| using ::wmemchr; | |
| using ::wmemcmp; | |
| using ::wmemcpy; | |
| using ::wmemmove; | |
| using ::wmemset; | |
| using ::wprintf; | |
| using ::wscanf; | |
| } | |
| ],[],[], [enable_wchar_t=no]) | |
| else | |
| enable_wchar_t=no | |
| fi | |
| AC_LANG_RESTORE | |
| fi | |
| if test x"$enable_wchar_t" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_USE_WCHAR_T, 1, | |
| [Define if code specialized for wchar_t should be used.]) | |
| fi | |
| AC_MSG_CHECKING([for enabled wchar_t specializations]) | |
| AC_MSG_RESULT([$enable_wchar_t]) | |
| ]) | |
| dnl | |
| dnl Check to see if building and using a C++ precompiled header can be done. | |
| dnl | |
| dnl --enable-libstdcxx-pch=yes | |
| dnl default, this shows intent to use stdc++.h.gch If it looks like it | |
| dnl may work, after some light-hearted attempts to puzzle out compiler | |
| dnl support, flip bits on in include/Makefile.am | |
| dnl | |
| dnl --disable-libstdcxx-pch | |
| dnl turns off attempts to use or build stdc++.h.gch. | |
| dnl | |
| dnl Substs: | |
| dnl glibcxx_PCHFLAGS | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_PCH], [ | |
| GLIBCXX_ENABLE(libstdcxx-pch,$1,,[build pre-compiled libstdc++ headers]) | |
| if test $enable_libstdcxx_pch = yes; then | |
| AC_CACHE_CHECK([for compiler with PCH support], | |
| [glibcxx_cv_prog_CXX_pch], | |
| [ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -Werror -Winvalid-pch -Wno-deprecated" | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| echo '#include <math.h>' > conftest.h | |
| if $CXX $CXXFLAGS $CPPFLAGS -x c++-header conftest.h \ | |
| -o conftest.h.gch 1>&5 2>&1 && | |
| echo '#error "pch failed"' > conftest.h && | |
| echo '#include "conftest.h"' > conftest.cc && | |
| $CXX -c $CXXFLAGS $CPPFLAGS conftest.cc 1>&5 2>&1 ; | |
| then | |
| glibcxx_cv_prog_CXX_pch=yes | |
| else | |
| glibcxx_cv_prog_CXX_pch=no | |
| fi | |
| rm -f conftest* | |
| CXXFLAGS=$ac_save_CXXFLAGS | |
| AC_LANG_RESTORE | |
| ]) | |
| enable_libstdcxx_pch=$glibcxx_cv_prog_CXX_pch | |
| fi | |
| AC_MSG_CHECKING([for enabled PCH]) | |
| AC_MSG_RESULT([$enable_libstdcxx_pch]) | |
| GLIBCXX_CONDITIONAL(GLIBCXX_BUILD_PCH, test $enable_libstdcxx_pch = yes) | |
| if test $enable_libstdcxx_pch = yes; then | |
| glibcxx_PCHFLAGS="-include bits/stdc++.h" | |
| else | |
| glibcxx_PCHFLAGS="" | |
| fi | |
| AC_SUBST(glibcxx_PCHFLAGS) | |
| ]) | |
| dnl | |
| dnl Check for atomic builtins. | |
| dnl See: | |
| dnl http://gcc.gnu.org/onlinedocs/gcc/_005f_005fatomic-Builtins.html | |
| dnl | |
| dnl This checks to see if the host supports the compiler-generated | |
| dnl builtins for atomic operations for various integral sizes. Note, this | |
| dnl is intended to be an all-or-nothing switch, so all the atomic operations | |
| dnl that are used should be checked. | |
| dnl | |
| dnl Note: | |
| dnl libgomp and libgfortran use a link test, see CHECK_SYNC_FETCH_AND_ADD. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_ATOMIC_BUILTINS], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| old_CXXFLAGS="$CXXFLAGS" | |
| # Do link tests if possible, instead asm tests, limited to some platforms | |
| # see discussion in PR target/40134, PR libstdc++/40133 and the thread | |
| # starting at http://gcc.gnu.org/ml/gcc-patches/2009-07/msg00322.html | |
| atomic_builtins_link_tests=no | |
| if test x$gcc_no_link != xyes; then | |
| # Can do link tests. Limit to some tested platforms | |
| case "$host" in | |
| *-*-linux* | *-*-uclinux* | *-*-kfreebsd*-gnu | *-*-gnu*) | |
| atomic_builtins_link_tests=yes | |
| ;; | |
| esac | |
| fi | |
| if test x$atomic_builtins_link_tests = xyes; then | |
| # Do link tests. | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| AC_CACHE_CHECK([for atomic builtins for bool], | |
| glibcxx_cv_atomic_bool, [ | |
| AC_TRY_LINK( | |
| [ ], | |
| [typedef bool atomic_type; | |
| atomic_type c1; | |
| atomic_type c2; | |
| atomic_type c3(0); | |
| // N.B. __atomic_fetch_add is not supported for bool. | |
| __atomic_compare_exchange_n(&c1, &c2, c3, true, __ATOMIC_ACQ_REL, | |
| __ATOMIC_RELAXED); | |
| __atomic_test_and_set(&c1, __ATOMIC_RELAXED); | |
| __atomic_load_n(&c1, __ATOMIC_RELAXED); | |
| ], | |
| [glibcxx_cv_atomic_bool=yes], | |
| [glibcxx_cv_atomic_bool=no]) | |
| ]) | |
| AC_CACHE_CHECK([for atomic builtins for short], | |
| glibcxx_cv_atomic_short, [ | |
| AC_TRY_LINK( | |
| [ ], | |
| [typedef short atomic_type; | |
| atomic_type c1; | |
| atomic_type c2; | |
| atomic_type c3(0); | |
| __atomic_fetch_add(&c1, c2, __ATOMIC_RELAXED); | |
| __atomic_compare_exchange_n(&c1, &c2, c3, true, __ATOMIC_ACQ_REL, | |
| __ATOMIC_RELAXED); | |
| __atomic_test_and_set(&c1, __ATOMIC_RELAXED); | |
| __atomic_load_n(&c1, __ATOMIC_RELAXED); | |
| ], | |
| [glibcxx_cv_atomic_short=yes], | |
| [glibcxx_cv_atomic_short=no]) | |
| ]) | |
| AC_CACHE_CHECK([for atomic builtins for int], | |
| glibcxx_cv_atomic_int, [ | |
| AC_TRY_LINK( | |
| [ ], | |
| [typedef int atomic_type; | |
| atomic_type c1; | |
| atomic_type c2; | |
| atomic_type c3(0); | |
| __atomic_fetch_add(&c1, c2, __ATOMIC_RELAXED); | |
| __atomic_compare_exchange_n(&c1, &c2, c3, true, __ATOMIC_ACQ_REL, | |
| __ATOMIC_RELAXED); | |
| __atomic_test_and_set(&c1, __ATOMIC_RELAXED); | |
| __atomic_load_n(&c1, __ATOMIC_RELAXED); | |
| ], | |
| [glibcxx_cv_atomic_int=yes], | |
| [glibcxx_cv_atomic_int=no]) | |
| ]) | |
| AC_CACHE_CHECK([for atomic builtins for long long], | |
| glibcxx_cv_atomic_long_long, [ | |
| AC_TRY_LINK( | |
| [ ], | |
| [typedef long long atomic_type; | |
| atomic_type c1; | |
| atomic_type c2; | |
| atomic_type c3(0); | |
| __atomic_fetch_add(&c1, c2, __ATOMIC_RELAXED); | |
| __atomic_compare_exchange_n(&c1, &c2, c3, true, __ATOMIC_ACQ_REL, | |
| __ATOMIC_RELAXED); | |
| __atomic_test_and_set(&c1, __ATOMIC_RELAXED); | |
| __atomic_load_n(&c1, __ATOMIC_RELAXED); | |
| ], | |
| [glibcxx_cv_atomic_long_long=yes], | |
| [glibcxx_cv_atomic_long_long=no]) | |
| ]) | |
| else | |
| # Do asm tests. | |
| # Compile unoptimized. | |
| CXXFLAGS='-O0 -S' | |
| # Fake what AC_TRY_COMPILE does. | |
| cat > conftest.$ac_ext << EOF | |
| [#]line __oline__ "configure" | |
| int main() | |
| { | |
| typedef bool atomic_type; | |
| atomic_type c1; | |
| atomic_type c2; | |
| atomic_type c3(0); | |
| // N.B. __atomic_fetch_add is not supported for bool. | |
| __atomic_compare_exchange_n(&c1, &c2, c3, true, __ATOMIC_ACQ_REL, | |
| __ATOMIC_RELAXED); | |
| __atomic_test_and_set(&c1, __ATOMIC_RELAXED); | |
| __atomic_load_n(&c1, __ATOMIC_RELAXED); | |
| return 0; | |
| } | |
| EOF | |
| AC_MSG_CHECKING([for atomic builtins for bool]) | |
| if AC_TRY_EVAL(ac_compile); then | |
| if grep __atomic_ conftest.s >/dev/null 2>&1 ; then | |
| glibcxx_cv_atomic_bool=no | |
| else | |
| glibcxx_cv_atomic_bool=yes | |
| fi | |
| fi | |
| AC_MSG_RESULT($glibcxx_cv_atomic_bool) | |
| rm -f conftest* | |
| cat > conftest.$ac_ext << EOF | |
| [#]line __oline__ "configure" | |
| int main() | |
| { | |
| typedef short atomic_type; | |
| atomic_type c1; | |
| atomic_type c2; | |
| atomic_type c3(0); | |
| __atomic_fetch_add(&c1, c2, __ATOMIC_RELAXED); | |
| __atomic_compare_exchange_n(&c1, &c2, c3, true, __ATOMIC_ACQ_REL, | |
| __ATOMIC_RELAXED); | |
| __atomic_test_and_set(&c1, __ATOMIC_RELAXED); | |
| __atomic_load_n(&c1, __ATOMIC_RELAXED); | |
| return 0; | |
| } | |
| EOF | |
| AC_MSG_CHECKING([for atomic builtins for short]) | |
| if AC_TRY_EVAL(ac_compile); then | |
| if grep __atomic_ conftest.s >/dev/null 2>&1 ; then | |
| glibcxx_cv_atomic_short=no | |
| else | |
| glibcxx_cv_atomic_short=yes | |
| fi | |
| fi | |
| AC_MSG_RESULT($glibcxx_cv_atomic_short) | |
| rm -f conftest* | |
| cat > conftest.$ac_ext << EOF | |
| [#]line __oline__ "configure" | |
| int main() | |
| { | |
| // NB: _Atomic_word not necessarily int. | |
| typedef int atomic_type; | |
| atomic_type c1; | |
| atomic_type c2; | |
| atomic_type c3(0); | |
| __atomic_fetch_add(&c1, c2, __ATOMIC_RELAXED); | |
| __atomic_compare_exchange_n(&c1, &c2, c3, true, __ATOMIC_ACQ_REL, | |
| __ATOMIC_RELAXED); | |
| __atomic_test_and_set(&c1, __ATOMIC_RELAXED); | |
| __atomic_load_n(&c1, __ATOMIC_RELAXED); | |
| return 0; | |
| } | |
| EOF | |
| AC_MSG_CHECKING([for atomic builtins for int]) | |
| if AC_TRY_EVAL(ac_compile); then | |
| if grep __atomic_ conftest.s >/dev/null 2>&1 ; then | |
| glibcxx_cv_atomic_int=no | |
| else | |
| glibcxx_cv_atomic_int=yes | |
| fi | |
| fi | |
| AC_MSG_RESULT($glibcxx_cv_atomic_int) | |
| rm -f conftest* | |
| cat > conftest.$ac_ext << EOF | |
| [#]line __oline__ "configure" | |
| int main() | |
| { | |
| typedef long long atomic_type; | |
| atomic_type c1; | |
| atomic_type c2; | |
| atomic_type c3(0); | |
| __atomic_fetch_add(&c1, c2, __ATOMIC_RELAXED); | |
| __atomic_compare_exchange_n(&c1, &c2, c3, true, __ATOMIC_ACQ_REL, | |
| __ATOMIC_RELAXED); | |
| __atomic_test_and_set(&c1, __ATOMIC_RELAXED); | |
| __atomic_load_n(&c1, __ATOMIC_RELAXED); | |
| return 0; | |
| } | |
| EOF | |
| AC_MSG_CHECKING([for atomic builtins for long long]) | |
| if AC_TRY_EVAL(ac_compile); then | |
| if grep __atomic_ conftest.s >/dev/null 2>&1 ; then | |
| glibcxx_cv_atomic_long_long=no | |
| else | |
| glibcxx_cv_atomic_long_long=yes | |
| fi | |
| fi | |
| AC_MSG_RESULT($glibcxx_cv_atomic_long_long) | |
| rm -f conftest* | |
| fi | |
| CXXFLAGS="$old_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| # Set atomicity_dir to builtins if all but the long long test above passes, | |
| # or if the builtins were already chosen (e.g. by configure.host). | |
| if { test "$glibcxx_cv_atomic_bool" = yes \ | |
| && test "$glibcxx_cv_atomic_short" = yes \ | |
| && test "$glibcxx_cv_atomic_int" = yes; } \ | |
| || test "$atomicity_dir" = "cpu/generic/atomicity_builtins"; then | |
| AC_DEFINE(_GLIBCXX_ATOMIC_BUILTINS, 1, | |
| [Define if the compiler supports C++11 atomics.]) | |
| atomicity_dir=cpu/generic/atomicity_builtins | |
| fi | |
| # If still generic, set to mutex. | |
| if test $atomicity_dir = "cpu/generic" ; then | |
| atomicity_dir=cpu/generic/atomicity_mutex | |
| AC_MSG_WARN([No native atomic operations are provided for this platform.]) | |
| if test "x$target_thread_file" = xsingle; then | |
| AC_MSG_WARN([They cannot be faked when thread support is disabled.]) | |
| AC_MSG_WARN([Thread-safety of certain classes is not guaranteed.]) | |
| else | |
| AC_MSG_WARN([They will be faked using a mutex.]) | |
| AC_MSG_WARN([Performance of certain classes will degrade as a result.]) | |
| fi | |
| fi | |
| ]) | |
| dnl | |
| dnl Set default lock policy for synchronizing shared_ptr reference counting. | |
| dnl | |
| dnl --with-libstdcxx-lock-policy=auto | |
| dnl Use atomic operations for shared_ptr reference counting only if | |
| dnl the default target supports atomic compare-and-swap. | |
| dnl --with-libstdcxx-lock-policy=atomic | |
| dnl Use atomic operations for shared_ptr reference counting. | |
| dnl --with-libstdcxx-lock-policy=mutex | |
| dnl Use a mutex to synchronize shared_ptr reference counting. | |
| dnl | |
| dnl This controls the value of __gnu_cxx::__default_lock_policy, which | |
| dnl determines how shared_ptr reference counts are synchronized. | |
| dnl The option "atomic" means that atomic operations should be used, | |
| dnl "mutex" means that a mutex will be used. The default option, "auto", | |
| dnl will check if the target supports the compiler-generated builtins | |
| dnl for atomic compare-and-swap operations for 2-byte and 4-byte integers, | |
| dnl and will use "atomic" if supported, "mutex" otherwise. | |
| dnl This option is ignored if the thread model used by GCC is "single", | |
| dnl as no synchronization is used at all in that case. | |
| dnl This option affects the library ABI (except in the "single" thread model). | |
| dnl | |
| dnl Defines _GLIBCXX_HAVE_ATOMIC_LOCK_POLICY to 1 if atomics should be used. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_LOCK_POLICY], [ | |
| AC_ARG_WITH([libstdcxx-lock-policy], | |
| AC_HELP_STRING([--with-libstdcxx-lock-policy={atomic,mutex,auto}], | |
| [synchronization policy for shared_ptr reference counting [default=auto]]), | |
| [libstdcxx_atomic_lock_policy=$withval], | |
| [libstdcxx_atomic_lock_policy=auto]) | |
| case "$libstdcxx_atomic_lock_policy" in | |
| atomic|mutex|auto) ;; | |
| *) AC_MSG_ERROR([Invalid argument for --with-libstdcxx-lock-policy]) ;; | |
| esac | |
| AC_MSG_CHECKING([for lock policy for shared_ptr reference counts]) | |
| if test x"$libstdcxx_atomic_lock_policy" = x"auto"; then | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| dnl Why do we care about 2-byte CAS on targets with 4-byte _Atomic_word?! | |
| dnl Why don't we check 8-byte CAS for sparc64, where _Atomic_word is long?! | |
| dnl New targets should only check for CAS for the _Atomic_word type. | |
| AC_TRY_COMPILE([ | |
| #if defined __AMDGCN__ || defined __nvptx__ | |
| /* Yes, please. */ | |
| #elif defined __riscv | |
| # error "Defaulting to mutex-based locks for ABI compatibility" | |
| #elif ! defined __GCC_HAVE_SYNC_COMPARE_AND_SWAP_2 | |
| # error "No 2-byte compare-and-swap" | |
| #elif ! defined __GCC_HAVE_SYNC_COMPARE_AND_SWAP_4 | |
| # error "No 4-byte compare-and-swap" | |
| #endif | |
| ],, | |
| [libstdcxx_atomic_lock_policy=atomic], | |
| [libstdcxx_atomic_lock_policy=mutex]) | |
| AC_LANG_RESTORE | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| fi | |
| if test x"$libstdcxx_atomic_lock_policy" = x"atomic"; then | |
| AC_MSG_RESULT(atomic) | |
| AC_DEFINE(HAVE_ATOMIC_LOCK_POLICY,1, | |
| [Defined if shared_ptr reference counting should use atomic operations.]) | |
| else | |
| AC_MSG_RESULT(mutex) | |
| fi | |
| ]) | |
| dnl | |
| dnl Allow visibility attributes to be used on namespaces, objects, etc. | |
| dnl | |
| dnl --enable-libstdcxx-visibility enables attempt to use visibility attributes. | |
| dnl --disable-libstdcxx-visibility turns off all use of visibility attributes. | |
| dnl + Usage: GLIBCXX_ENABLE_LIBSTDCXX_VISIBILITY[(DEFAULT)] | |
| dnl Where DEFAULT is 'yes'. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_LIBSTDCXX_VISIBILITY], [ | |
| GLIBCXX_ENABLE(libstdcxx-visibility,$1,,[enables visibility safe usage]) | |
| if test x$enable_libstdcxx_visibility = xyes ; then | |
| dnl all hail libgfortran | |
| dnl Check whether the target supports hidden visibility. | |
| AC_CACHE_CHECK([whether the target supports hidden visibility], | |
| glibcxx_cv_have_attribute_visibility, [ | |
| save_CFLAGS="$CFLAGS" | |
| CFLAGS="$CFLAGS -Werror" | |
| AC_TRY_COMPILE([void __attribute__((visibility("hidden"))) foo(void) { }], | |
| [], glibcxx_cv_have_attribute_visibility=yes, | |
| glibcxx_cv_have_attribute_visibility=no) | |
| CFLAGS="$save_CFLAGS"]) | |
| if test $glibcxx_cv_have_attribute_visibility = no; then | |
| enable_libstdcxx_visibility=no | |
| fi | |
| fi | |
| GLIBCXX_CONDITIONAL(ENABLE_VISIBILITY, test $enable_libstdcxx_visibility = yes) | |
| AC_MSG_NOTICE([visibility supported: $enable_libstdcxx_visibility]) | |
| ]) | |
| dnl | |
| dnl Add version tags to symbols in shared library (or not), additionally | |
| dnl marking other symbols as private/local (or not). | |
| dnl | |
| dnl Sets libtool_VERSION, and determines shared library SONAME. | |
| dnl | |
| dnl This depends on GLIBCXX CHECK_LINKER_FEATURES, but without it assumes no. | |
| dnl | |
| dnl --enable-symvers=style adds a version script to the linker call when | |
| dnl creating the shared library. The choice of version script is | |
| dnl controlled by 'style'. | |
| dnl --disable-symvers does not. | |
| dnl | |
| dnl + Usage: GLIBCXX_ENABLE_SYMVERS[(DEFAULT)] | |
| dnl Where DEFAULT is either 'yes' or 'no'. Passing `yes' tries to | |
| dnl choose a default style based on linker characteristics. Passing | |
| dnl 'no' disables versioning. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_SYMVERS], [ | |
| GLIBCXX_ENABLE(symvers,$1,[[[=STYLE]]], | |
| [enables symbol versioning of the shared library], | |
| [permit yes|no|gnu|gnu-versioned-namespace|darwin|darwin-export|sun]) | |
| # If we never went through the GLIBCXX_CHECK_LINKER_FEATURES macro, then we | |
| # don't know enough about $LD to do tricks... | |
| AC_REQUIRE([GLIBCXX_CHECK_LINKER_FEATURES]) | |
| # Sun style symbol versions needs GNU c++filt for make_sunver.pl to work | |
| # with extern "C++" in version scripts. | |
| AC_REQUIRE([GCC_PROG_GNU_CXXFILT]) | |
| # Turn a 'yes' into a suitable default. | |
| if test x$enable_symvers = xyes ; then | |
| if test $enable_shared = no || test "x$LD" = x || test x$gcc_no_link = xyes; then | |
| enable_symvers=no | |
| else | |
| if test $with_gnu_ld = yes ; then | |
| case ${target_os} in | |
| hpux*) | |
| enable_symvers=no ;; | |
| *) | |
| enable_symvers=gnu ;; | |
| esac | |
| else | |
| case ${target_os} in | |
| darwin*) | |
| enable_symvers=darwin ;; | |
| # Sun symbol versioning exists since Solaris 2.5. | |
| solaris2.[[5-9]]* | solaris2.1[[0-9]]*) | |
| # make_sunver.pl needs GNU c++filt to support extern "C++" in | |
| # version scripts, so disable symbol versioning if none can be | |
| # found. | |
| if test -z "$ac_cv_path_CXXFILT"; then | |
| AC_MSG_WARN([=== You have requested Sun symbol versioning, but]) | |
| AC_MSG_WARN([=== no GNU c++filt could be found.]) | |
| AC_MSG_WARN([=== Symbol versioning will be disabled.]) | |
| enable_symvers=no | |
| else | |
| enable_symvers=sun | |
| fi | |
| ;; | |
| *) | |
| enable_symvers=no ;; | |
| esac | |
| fi | |
| fi | |
| fi | |
| # Check to see if 'darwin' or 'darwin-export' can win. | |
| if test x$enable_symvers = xdarwin-export ; then | |
| enable_symvers=darwin | |
| fi | |
| # Check if 'sun' was requested on non-Solaris 2 platforms. | |
| if test x$enable_symvers = xsun ; then | |
| case ${target_os} in | |
| solaris2*) | |
| # All fine. | |
| ;; | |
| *) | |
| # Unlikely to work. | |
| AC_MSG_WARN([=== You have requested Sun symbol versioning, but]) | |
| AC_MSG_WARN([=== you are not targetting Solaris 2.]) | |
| AC_MSG_WARN([=== Symbol versioning will be disabled.]) | |
| enable_symvers=no | |
| ;; | |
| esac | |
| fi | |
| # Check to see if 'gnu' can win. | |
| if test $enable_symvers = gnu || | |
| test $enable_symvers = gnu-versioned-namespace || | |
| test $enable_symvers = sun; then | |
| # Check to see if libgcc_s exists, indicating that shared libgcc is possible. | |
| AC_MSG_CHECKING([for shared libgcc]) | |
| ac_save_CFLAGS="$CFLAGS" | |
| CFLAGS=' -lgcc_s' | |
| AC_TRY_LINK(, [return 0;], glibcxx_shared_libgcc=yes, glibcxx_shared_libgcc=no) | |
| CFLAGS="$ac_save_CFLAGS" | |
| if test $glibcxx_shared_libgcc = no; then | |
| cat > conftest.c <<EOF | |
| int main (void) { return 0; } | |
| EOF | |
| changequote(,)dnl | |
| glibcxx_libgcc_s_suffix=`${CC-cc} $CFLAGS $CPPFLAGS $LDFLAGS \ | |
| -shared -shared-libgcc -o conftest.so \ | |
| conftest.c -v 2>&1 >/dev/null \ | |
| | sed -n 's/^.* -lgcc_s\([^ ]*\) .*$/\1/p'` | |
| changequote([,])dnl | |
| rm -f conftest.c conftest.so | |
| if test x${glibcxx_libgcc_s_suffix+set} = xset; then | |
| CFLAGS=" -lgcc_s$glibcxx_libgcc_s_suffix" | |
| AC_TRY_LINK(, [return 0;], glibcxx_shared_libgcc=yes) | |
| CFLAGS="$ac_save_CFLAGS" | |
| fi | |
| fi | |
| AC_MSG_RESULT($glibcxx_shared_libgcc) | |
| # For GNU ld, we need at least this version. The format is described in | |
| # GLIBCXX_CHECK_LINKER_FEATURES above. | |
| glibcxx_min_gnu_ld_version=21400 | |
| # If no shared libgcc, can't win. | |
| if test $glibcxx_shared_libgcc != yes; then | |
| AC_MSG_WARN([=== You have requested GNU symbol versioning, but]) | |
| AC_MSG_WARN([=== you are not building a shared libgcc_s.]) | |
| AC_MSG_WARN([=== Symbol versioning will be disabled.]) | |
| enable_symvers=no | |
| elif test $with_gnu_ld != yes && test $enable_symvers = sun; then | |
| : All interesting versions of Sun ld support sun style symbol versioning. | |
| elif test $with_gnu_ld != yes ; then | |
| # just fail for now | |
| AC_MSG_WARN([=== You have requested GNU symbol versioning, but]) | |
| AC_MSG_WARN([=== you are not using the GNU linker.]) | |
| AC_MSG_WARN([=== Symbol versioning will be disabled.]) | |
| enable_symvers=no | |
| elif test $glibcxx_ld_is_gold = yes ; then | |
| : All versions of gold support symbol versioning. | |
| elif test $glibcxx_ld_is_mold = yes ; then | |
| : All versions of mold support symbol versioning. | |
| elif test $glibcxx_gnu_ld_version -lt $glibcxx_min_gnu_ld_version ; then | |
| # The right tools, the right setup, but too old. Fallbacks? | |
| AC_MSG_WARN(=== Linker version $glibcxx_gnu_ld_version is too old for) | |
| AC_MSG_WARN(=== full symbol versioning support in this release of GCC.) | |
| AC_MSG_WARN(=== You would need to upgrade your binutils to version) | |
| AC_MSG_WARN(=== $glibcxx_min_gnu_ld_version or later and rebuild GCC.) | |
| AC_MSG_WARN([=== Symbol versioning will be disabled.]) | |
| enable_symvers=no | |
| fi | |
| fi | |
| # For libtool versioning info, format is CURRENT:REVISION:AGE | |
| libtool_VERSION=6:34:0 | |
| # Everything parsed; figure out what files and settings to use. | |
| case $enable_symvers in | |
| no) | |
| SYMVER_FILE=config/abi/pre/none.ver | |
| ;; | |
| gnu) | |
| SYMVER_FILE=config/abi/pre/gnu.ver | |
| AC_DEFINE(_GLIBCXX_SYMVER_GNU, 1, | |
| [Define to use GNU versioning in the shared library.]) | |
| ;; | |
| gnu-versioned-namespace) | |
| libtool_VERSION=8:0:0 | |
| SYMVER_FILE=config/abi/pre/gnu-versioned-namespace.ver | |
| AC_DEFINE(_GLIBCXX_SYMVER_GNU_NAMESPACE, 1, | |
| [Define to use GNU namespace versioning in the shared library.]) | |
| ;; | |
| darwin) | |
| SYMVER_FILE=config/abi/pre/gnu.ver | |
| AC_DEFINE(_GLIBCXX_SYMVER_DARWIN, 1, | |
| [Define to use darwin versioning in the shared library.]) | |
| ;; | |
| sun) | |
| SYMVER_FILE=config/abi/pre/gnu.ver | |
| AC_DEFINE(_GLIBCXX_SYMVER_SUN, 1, | |
| [Define to use Sun versioning in the shared library.]) | |
| ;; | |
| esac | |
| if test x$enable_symvers != xno ; then | |
| AC_DEFINE(_GLIBCXX_SYMVER, 1, | |
| [Define to use symbol versioning in the shared library.]) | |
| fi | |
| AC_CACHE_CHECK([whether the target supports .symver directive], | |
| glibcxx_cv_have_as_symver_directive, [ | |
| AC_TRY_COMPILE([void foo (void); __asm (".symver foo, bar@SYMVER");], | |
| [], glibcxx_cv_have_as_symver_directive=yes, | |
| glibcxx_cv_have_as_symver_directive=no)]) | |
| if test $glibcxx_cv_have_as_symver_directive = yes; then | |
| AC_DEFINE(HAVE_AS_SYMVER_DIRECTIVE, 1, | |
| [Define to 1 if the target assembler supports .symver directive.]) | |
| fi | |
| AC_SUBST(SYMVER_FILE) | |
| AC_SUBST(port_specific_symbol_files) | |
| GLIBCXX_CONDITIONAL(ENABLE_SYMVERS, test $enable_symvers != no) | |
| GLIBCXX_CONDITIONAL(ENABLE_SYMVERS_GNU, test $enable_symvers = gnu) | |
| GLIBCXX_CONDITIONAL(ENABLE_SYMVERS_GNU_NAMESPACE, test $enable_symvers = gnu-versioned-namespace) | |
| GLIBCXX_CONDITIONAL(ENABLE_SYMVERS_DARWIN, test $enable_symvers = darwin) | |
| GLIBCXX_CONDITIONAL(ENABLE_SYMVERS_SUN, test $enable_symvers = sun) | |
| AC_MSG_NOTICE(versioning on shared library symbols is $enable_symvers) | |
| if test $enable_symvers != no ; then | |
| case ${target_os} in | |
| # The Solaris 2 runtime linker doesn't support the GNU extension of | |
| # binding the same symbol to different versions | |
| solaris2*) | |
| ;; | |
| # Other platforms with GNU symbol versioning (GNU/Linux, more?) do. | |
| *) | |
| AC_DEFINE(HAVE_SYMVER_SYMBOL_RENAMING_RUNTIME_SUPPORT, 1, | |
| [Define to 1 if the target runtime linker supports binding the same symbol to different versions.]) | |
| ;; | |
| esac | |
| fi | |
| # Now, set up compatibility support, if any. | |
| # In addition, need this to deal with std::size_t mangling in | |
| # src/compatibility.cc. In a perfect world, could use | |
| # typeid(std::size_t).name()[0] to do direct substitution. | |
| AC_MSG_CHECKING([for size_t as unsigned int]) | |
| ac_save_CFLAGS="$CFLAGS" | |
| CFLAGS="-Werror" | |
| AC_TRY_COMPILE(, [__SIZE_TYPE__* stp; unsigned int* uip; stp = uip;], | |
| [glibcxx_size_t_is_i=yes], [glibcxx_size_t_is_i=no]) | |
| CFLAGS=$ac_save_CFLAGS | |
| if test "$glibcxx_size_t_is_i" = yes; then | |
| AC_DEFINE(_GLIBCXX_SIZE_T_IS_UINT, 1, [Define if size_t is unsigned int.]) | |
| fi | |
| AC_MSG_RESULT([$glibcxx_size_t_is_i]) | |
| AC_MSG_CHECKING([for ptrdiff_t as int]) | |
| ac_save_CFLAGS="$CFLAGS" | |
| CFLAGS="-Werror" | |
| AC_TRY_COMPILE(, [__PTRDIFF_TYPE__* ptp; int* ip; ptp = ip;], | |
| [glibcxx_ptrdiff_t_is_i=yes], [glibcxx_ptrdiff_t_is_i=no]) | |
| CFLAGS=$ac_save_CFLAGS | |
| if test "$glibcxx_ptrdiff_t_is_i" = yes; then | |
| AC_DEFINE(_GLIBCXX_PTRDIFF_T_IS_INT, 1, [Define if ptrdiff_t is int.]) | |
| fi | |
| AC_MSG_RESULT([$glibcxx_ptrdiff_t_is_i]) | |
| ]) | |
| dnl | |
| dnl Setup to use the gcc gthr.h thread-specific memory and mutex model. | |
| dnl We must stage the required headers so that they will be installed | |
| dnl with the library (unlike libgcc, the STL implementation is provided | |
| dnl solely within headers). Since we must not inject random user-space | |
| dnl macro names into user-provided C++ code, we first stage into <file>-in | |
| dnl and process to <file> with an output command. The reason for a two- | |
| dnl stage process here is to correctly handle $srcdir!=$objdir without | |
| dnl having to write complex code (the sed commands to clean the macro | |
| dnl namespace are complex and fragile enough as it is). We must also | |
| dnl add a relative path so that -I- is supported properly. | |
| dnl | |
| dnl Substs: | |
| dnl thread_header | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_THREADS], [ | |
| AC_MSG_CHECKING([for thread model used by GCC]) | |
| target_thread_file=`$CXX -v 2>&1 | sed -n 's/^Thread model: //p'` | |
| AC_MSG_RESULT([$target_thread_file]) | |
| GCC_AC_THREAD_HEADER([$target_thread_file]) | |
| ]) | |
| dnl | |
| dnl Check if gthread implementation defines the types and functions | |
| dnl required by the c++0x thread library. Conforming gthread | |
| dnl implementations can define __GTHREADS_CXX0X to enable use with c++0x. | |
| dnl | |
| dnl GLIBCXX_ENABLE_SYMVERS must be done before this. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_GTHREADS], [ | |
| GLIBCXX_ENABLE(libstdcxx-threads,auto,,[enable C++11 threads support]) | |
| if test x$enable_libstdcxx_threads = xauto || | |
| test x$enable_libstdcxx_threads = xyes; then | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions \ | |
| -I${toplevel_srcdir}/libgcc -I${toplevel_builddir}/libgcc" | |
| target_thread_file=`$CXX -v 2>&1 | sed -n 's/^Thread model: //p'` | |
| case $target_thread_file in | |
| posix) | |
| CXXFLAGS="$CXXFLAGS -DSUPPORTS_WEAK -DGTHREAD_USE_WEAK -D_PTHREADS" | |
| ;; | |
| win32) | |
| CXXFLAGS="$CXXFLAGS -D_WIN32_THREADS" | |
| # The support of condition variables is disabled by default in | |
| # the Win32 gthreads library, so enable it on explicit request. | |
| if test x$enable_libstdcxx_threads = xyes; then | |
| CXXFLAGS="$CXXFLAGS -D_WIN32_WINNT=0x0600" | |
| fi | |
| ;; | |
| esac | |
| AC_MSG_CHECKING([whether it can be safely assumed that mutex_timedlock is available]) | |
| AC_TRY_COMPILE([#include <unistd.h>], | |
| [ | |
| // In case of POSIX threads check _POSIX_TIMEOUTS. | |
| #if (defined(_PTHREADS) \ | |
| && (!defined(_POSIX_TIMEOUTS) || _POSIX_TIMEOUTS <= 0)) | |
| #error | |
| // In case of Win32 threads there is no support. | |
| #elif defined(_WIN32_THREADS) | |
| #error | |
| #endif | |
| ], [ac_gthread_use_mutex_timedlock=1], [ac_gthread_use_mutex_timedlock=0]) | |
| AC_DEFINE_UNQUOTED(_GTHREAD_USE_MUTEX_TIMEDLOCK, $ac_gthread_use_mutex_timedlock, | |
| [Define to 1 if mutex_timedlock is available.]) | |
| if test $ac_gthread_use_mutex_timedlock = 1 ; then res_mutex_timedlock=yes ; | |
| else res_mutex_timedlock=no ; fi | |
| AC_MSG_RESULT([$res_mutex_timedlock]) | |
| AC_MSG_CHECKING([for gthreads library]) | |
| AC_TRY_COMPILE([#include "gthr.h"], | |
| [ | |
| #ifndef __GTHREADS_CXX0X | |
| #error | |
| #endif | |
| ], [ac_has_gthreads=yes], [ac_has_gthreads=no]) | |
| else | |
| ac_has_gthreads=no | |
| fi | |
| AC_MSG_RESULT([$ac_has_gthreads]) | |
| if test x"$ac_has_gthreads" = x"yes"; then | |
| AC_DEFINE(_GLIBCXX_HAS_GTHREADS, 1, | |
| [Define if gthreads library is available.]) | |
| # Also check for pthread_rwlock_t for std::shared_timed_mutex in C++14 | |
| # but only do so if we're using pthread in the gthread library. | |
| # On VxWorks for example, pthread_rwlock_t is defined in sys/types.h | |
| # but the pthread library is not there by default and the gthread library | |
| # does not use it. | |
| AC_TRY_COMPILE([#include "gthr.h"], | |
| [ | |
| #if (!defined(_PTHREADS)) | |
| #error | |
| #endif | |
| ], [ac_gthread_use_pthreads=yes], [ac_gthread_use_pthreads=no]) | |
| if test x"$ac_gthread_use_pthreads" = x"yes"; then | |
| AC_CHECK_TYPE([pthread_rwlock_t], | |
| [AC_DEFINE([_GLIBCXX_USE_PTHREAD_RWLOCK_T], 1, | |
| [Define if POSIX read/write locks are available in <gthr.h>.])], | |
| [], | |
| [#include "gthr.h"]) | |
| fi | |
| # See above for the rationale. | |
| if test $target_thread_file = win32; then | |
| CPPFLAGS="$CPPFLAGS -D_WIN32_WINNT=0x0600" | |
| fi | |
| fi | |
| AC_CHECK_HEADER(semaphore.h, [ | |
| AC_MSG_CHECKING([for POSIX Semaphores and sem_timedwait]) | |
| AC_TRY_COMPILE([ | |
| #include <unistd.h> | |
| #include <semaphore.h> | |
| #include <limits.h> | |
| ], | |
| [ | |
| #if !defined _POSIX_TIMEOUTS || _POSIX_TIMEOUTS <= 0 | |
| # error "POSIX Timeouts option not supported" | |
| #elif !defined _POSIX_SEMAPHORES || _POSIX_SEMAPHORES <= 0 | |
| # error "POSIX Semaphores option not supported" | |
| #else | |
| #if defined SEM_VALUE_MAX | |
| constexpr int sem_value_max = SEM_VALUE_MAX; | |
| #elif defined _POSIX_SEM_VALUE_MAX | |
| constexpr int sem_value_max = _POSIX_SEM_VALUE_MAX; | |
| #else | |
| # error "SEM_VALUE_MAX not available" | |
| #endif | |
| sem_t sem; | |
| sem_init(&sem, 0, sem_value_max); | |
| struct timespec ts = { 0 }; | |
| sem_timedwait(&sem, &ts); | |
| #endif | |
| ], | |
| [ac_have_posix_semaphore=yes], | |
| [ac_have_posix_semaphore=no])], | |
| [ac_have_posix_semaphore=no]) | |
| if test $ac_have_posix_semaphore = yes ; then | |
| AC_DEFINE(HAVE_POSIX_SEMAPHORE, | |
| 1, | |
| [Define to 1 if POSIX Semaphores with sem_timedwait are available in <semaphore.h>.]) | |
| fi | |
| AC_MSG_RESULT([$ac_have_posix_semaphore]) | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| ]) | |
| # Check whether LC_MESSAGES is available in <locale.h>. | |
| # Ulrich Drepper <drepper@cygnus.com>, 1995. | |
| # | |
| # This file can be copied and used freely without restrictions. It can | |
| # be used in projects which are not available under the GNU Public License | |
| # but which still want to provide support for the GNU gettext functionality. | |
| # Please note that the actual code is *not* freely available. | |
| AC_DEFUN([AC_LC_MESSAGES], [ | |
| AC_CHECK_HEADER(locale.h, [ | |
| AC_CACHE_CHECK([for LC_MESSAGES], ac_cv_val_LC_MESSAGES, | |
| [AC_TRY_COMPILE([#include <locale.h>], [return LC_MESSAGES], | |
| ac_cv_val_LC_MESSAGES=yes, ac_cv_val_LC_MESSAGES=no)]) | |
| if test $ac_cv_val_LC_MESSAGES = yes; then | |
| AC_DEFINE(HAVE_LC_MESSAGES, 1, | |
| [Define if LC_MESSAGES is available in <locale.h>.]) | |
| fi | |
| ]) | |
| ]) | |
| dnl | |
| dnl Check whether rdrand is supported in the assembler. | |
| AC_DEFUN([GLIBCXX_CHECK_X86_RDRAND], [ | |
| AC_CACHE_CHECK([for rdrand support in assembler], | |
| ac_cv_x86_rdrand, [ | |
| ac_cv_x86_rdrand=no | |
| case "$target" in | |
| i?86-*-* | \ | |
| x86_64-*-*) | |
| AC_TRY_COMPILE(, [asm("rdrand %eax");], | |
| [ac_cv_x86_rdrand=yes], [ac_cv_x86_rdrand=no]) | |
| esac | |
| ]) | |
| if test $ac_cv_x86_rdrand = yes; then | |
| AC_DEFINE(_GLIBCXX_X86_RDRAND, 1, | |
| [ Defined if as can handle rdrand. ]) | |
| fi | |
| ]) | |
| dnl | |
| dnl Check whether rdseed is supported in the assembler. | |
| AC_DEFUN([GLIBCXX_CHECK_X86_RDSEED], [ | |
| AC_CACHE_CHECK([for rdseed support in assembler], | |
| ac_cv_x86_rdseed, [ | |
| ac_cv_x86_rdseed=no | |
| case "$target" in | |
| i?86-*-* | \ | |
| x86_64-*-*) | |
| AC_TRY_COMPILE(, [asm("rdseed %eax");], | |
| [ac_cv_x86_rdseed=yes], [ac_cv_x86_rdseed=no]) | |
| esac | |
| ]) | |
| if test $ac_cv_x86_rdseed = yes; then | |
| AC_DEFINE(_GLIBCXX_X86_RDSEED, 1, | |
| [ Defined if as can handle rdseed. ]) | |
| fi | |
| ]) | |
| dnl | |
| dnl Check whether get_nprocs is available in <sys/sysinfo.h>, and define _GLIBCXX_USE_GET_NPROCS. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_GET_NPROCS], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| AC_CACHE_CHECK([for get_nprocs], | |
| glibcxx_cv_GET_NPROCS, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <sys/sysinfo.h>], | |
| [int n = get_nprocs();], | |
| [glibcxx_cv_GET_NPROCS=yes], | |
| [glibcxx_cv_GET_NPROCS=no]) | |
| ]) | |
| if test $glibcxx_cv_GET_NPROCS = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_GET_NPROCS, 1, [Define if get_nprocs is available in <sys/sysinfo.h>.]) | |
| fi | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether sysconf(_SC_NPROCESSORS_ONLN) is available in <unistd.h>, and define _GLIBCXX_USE_SC_NPROCESSORS_ONLN. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_SC_NPROCESSORS_ONLN], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| AC_CACHE_CHECK([for _SC_NPROCESSORS_ONLN], | |
| glibcxx_cv_SC_NPROCESSORS_ONLN, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <unistd.h>], | |
| [int n = sysconf(_SC_NPROCESSORS_ONLN);], | |
| [glibcxx_cv_SC_NPROCESSORS_ONLN=yes], | |
| [glibcxx_cv_SC_NPROCESSORS_ONLN=no]) | |
| ]) | |
| if test $glibcxx_cv_SC_NPROCESSORS_ONLN = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_SC_NPROCESSORS_ONLN, 1, [Define if _SC_NPROCESSORS_ONLN is available in <unistd.h>.]) | |
| fi | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether sysconf(_SC_NPROC_ONLN) is available in <unistd.h>, and define _GLIBCXX_USE_SC_NPROC_ONLN. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_SC_NPROC_ONLN], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| AC_CACHE_CHECK([for _SC_NPROC_ONLN], | |
| glibcxx_cv_SC_NPROC_ONLN, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <unistd.h>], | |
| [int n = sysconf(_SC_NPROC_ONLN);], | |
| [glibcxx_cv_SC_NPROC_ONLN=yes], | |
| [glibcxx_cv_SC_NPROC_ONLN=no]) | |
| ]) | |
| if test $glibcxx_cv_SC_NPROC_ONLN = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_SC_NPROC_ONLN, 1, [Define if _SC_NPROC_ONLN is available in <unistd.h>.]) | |
| fi | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether pthread_num_processors_np is available in <pthread.h>, and define _GLIBCXX_USE_PTHREADS_NUM_PROCESSORS_NP. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_PTHREADS_NUM_PROCESSORS_NP], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| AC_CACHE_CHECK([for pthreads_num_processors_np], | |
| glibcxx_cv_PTHREADS_NUM_PROCESSORS_NP, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <pthread.h>], | |
| [int n = pthread_num_processors_np();], | |
| [glibcxx_cv_PTHREADS_NUM_PROCESSORS_NP=yes], | |
| [glibcxx_cv_PTHREADS_NUM_PROCESSORS_NP=no]) | |
| ]) | |
| if test $glibcxx_cv_PTHREADS_NUM_PROCESSORS_NP = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_PTHREADS_NUM_PROCESSORS_NP, 1, [Define if pthreads_num_processors_np is available in <pthread.h>.]) | |
| fi | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether pthread_cond_clockwait is available in <pthread.h> for std::condition_variable to use, | |
| dnl and define _GLIBCXX_USE_PTHREAD_COND_CLOCKWAIT. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_PTHREAD_COND_CLOCKWAIT], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| ac_save_LIBS="$LIBS" | |
| LIBS="$LIBS -lpthread" | |
| AC_CACHE_CHECK([for pthread_cond_clockwait], | |
| glibcxx_cv_PTHREAD_COND_CLOCKWAIT, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <pthread.h>], | |
| [pthread_mutex_t mutex; pthread_cond_t cond; struct timespec ts; int n = pthread_cond_clockwait(&cond, &mutex, 0, &ts);], | |
| [glibcxx_cv_PTHREAD_COND_CLOCKWAIT=yes], | |
| [glibcxx_cv_PTHREAD_COND_CLOCKWAIT=no]) | |
| ]) | |
| if test $glibcxx_cv_PTHREAD_COND_CLOCKWAIT = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_PTHREAD_COND_CLOCKWAIT, 1, [Define if pthread_cond_clockwait is available in <pthread.h>.]) | |
| fi | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| LIBS="$ac_save_LIBS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether pthread_mutex_clocklock is available in <pthread.h> for std::timed_mutex to use, | |
| dnl and define _GLIBCXX_USE_PTHREAD_MUTEX_CLOCKLOCK. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_PTHREAD_MUTEX_CLOCKLOCK], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| ac_save_LIBS="$LIBS" | |
| LIBS="$LIBS -lpthread" | |
| AC_CACHE_CHECK([for pthread_mutex_clocklock], | |
| glibcxx_cv_PTHREAD_MUTEX_CLOCKLOCK, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <pthread.h>], | |
| [pthread_mutex_t mutex; struct timespec ts; int n = pthread_mutex_clocklock(&mutex, CLOCK_REALTIME, &ts);], | |
| [glibcxx_cv_PTHREAD_MUTEX_CLOCKLOCK=yes], | |
| [glibcxx_cv_PTHREAD_MUTEX_CLOCKLOCK=no]) | |
| ]) | |
| if test $glibcxx_cv_PTHREAD_MUTEX_CLOCKLOCK = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_PTHREAD_MUTEX_CLOCKLOCK, (_GLIBCXX_TSAN==0), [Define if pthread_mutex_clocklock is available in <pthread.h>.]) | |
| fi | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| LIBS="$ac_save_LIBS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether pthread_mutex_clocklock is available in <pthread.h> for std::timed_mutex to use, | |
| dnl and define _GLIBCXX_USE_PTHREAD_MUTEX_CLOCKLOCK. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_PTHREAD_RWLOCK_CLOCKLOCK], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| ac_save_LIBS="$LIBS" | |
| LIBS="$LIBS -lpthread" | |
| AC_CACHE_CHECK([for pthread_rwlock_clockrdlock, pthread_wlock_clockwrlock], | |
| glibcxx_cv_PTHREAD_RWLOCK_CLOCKLOCK, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <pthread.h>], | |
| [pthread_rwlock_t rwl; struct timespec ts;] | |
| [int n = pthread_rwlock_clockrdlock(&rwl, CLOCK_REALTIME, &ts);] | |
| [int m = pthread_rwlock_clockwrlock(&rwl, CLOCK_REALTIME, &ts);], | |
| [glibcxx_cv_PTHREAD_RWLOCK_CLOCKLOCK=yes], | |
| [glibcxx_cv_PTHREAD_RWLOCK_CLOCKLOCK=no]) | |
| ]) | |
| if test $glibcxx_cv_PTHREAD_RWLOCK_CLOCKLOCK = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_PTHREAD_RWLOCK_CLOCKLOCK, 1, [Define if pthread_rwlock_clockrdlock and pthread_rwlock_clockwrlock are available in <pthread.h>.]) | |
| fi | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| LIBS="$ac_save_LIBS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether sysctl is available in <pthread.h>, and define _GLIBCXX_USE_SYSCTL_HW_NCPU. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_SYSCTL_HW_NCPU], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| AC_CACHE_CHECK([for hw.ncpu sysctl], | |
| glibcxx_cv_SYSCTL_HW_NCPU, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [ | |
| #include <stddef.h> | |
| #include <sys/sysctl.h> | |
| ], | |
| [ | |
| int count; | |
| size_t size = sizeof(count); | |
| int mib[] = { CTL_HW, HW_NCPU }; | |
| sysctl(mib, 2, &count, &size, NULL, 0); | |
| ], | |
| [glibcxx_cv_SYSCTL_HW_NCPU=yes], | |
| [glibcxx_cv_SYSCTL_HW_NCPU=no]) | |
| ]) | |
| if test $glibcxx_cv_SYSCTL_HW_NCPU = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_SYSCTL_HW_NCPU, 1, [Define if sysctl(), CTL_HW and HW_NCPU are available in <sys/sysctl.h>.]) | |
| fi | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check to see if python pretty printing can be activated. | |
| dnl | |
| dnl --with-python-dir=dir | |
| dnl installs directory into $prefix/dir | |
| AC_DEFUN([GLIBCXX_ENABLE_PYTHON], [ | |
| AC_MSG_CHECKING([for custom python install directory]) | |
| AC_ARG_WITH([python-dir], | |
| AS_HELP_STRING([--with-python-dir], | |
| [the location to install Python modules. This path is relative starting from the prefix.]), | |
| [with_python_dir=$withval], [with_python_dir="no"]) | |
| AC_MSG_RESULT(${with_python_dir}) | |
| # Needed for installing Python modules during make install. | |
| python_mod_dir="${with_python_dir}" | |
| AC_SUBST(python_mod_dir) | |
| GLIBCXX_CONDITIONAL(ENABLE_PYTHONDIR, test $python_mod_dir != no) | |
| ]) | |
| dnl | |
| dnl Check to see if -Werror is disabled. | |
| dnl | |
| dnl --enable-werror/--disable-werror | |
| AC_DEFUN([GLIBCXX_ENABLE_WERROR], [ | |
| AC_MSG_CHECKING([for -Werror]) | |
| GLIBCXX_ENABLE(werror,$1,,[turns on -Werror]) | |
| AC_MSG_RESULT($enable_werror) | |
| GLIBCXX_CONDITIONAL(ENABLE_WERROR, test $enable_werror = yes) | |
| ]) | |
| dnl | |
| dnl Check whether obsolescent tmpnam is available in <stdio.h>, | |
| dnl and define _GLIBCXX_USE_TMPNAM. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_TMPNAM], [dnl | |
| dnl | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| dnl | |
| AC_CACHE_CHECK([for tmpnam], glibcxx_cv_TMPNAM, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <stdio.h>], | |
| [char *tmp = tmpnam(NULL);], | |
| [glibcxx_cv_TMPNAM=yes], | |
| [glibcxx_cv_TMPNAM=no]) | |
| ]) | |
| if test $glibcxx_cv_TMPNAM = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_TMPNAM, 1, [Define if obsolescent tmpnam is available in <stdio.h>.]) | |
| fi | |
| dnl | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check to see if sys/sdt.h exists and that it is suitable for use. | |
| dnl Some versions of sdt.h were not compatible with C++11. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_SDT_H], [ | |
| # Note that this test has to be run with the C language. | |
| # Otherwise, sdt.h will try to include some headers from | |
| # libstdc++ itself. | |
| AC_LANG_SAVE | |
| AC_LANG_C | |
| AC_CACHE_CHECK([for suitable sys/sdt.h], | |
| glibcxx_cv_sys_sdt_h, [ | |
| # Because we have to run the test in C, we use grep rather | |
| # than the compiler to check for the bug. The bug is that | |
| # were strings without trailing whitespace, causing g++ | |
| # to look for operator"". The pattern searches for the fixed | |
| # output. | |
| AC_EGREP_CPP([ \",\" ], [ | |
| #include <sys/sdt.h> | |
| int f() { STAP_PROBE(hi, bob); } | |
| ], [glibcxx_cv_sys_sdt_h=yes], [glibcxx_cv_sys_sdt_h=no]) | |
| ]) | |
| AC_LANG_RESTORE | |
| if test $glibcxx_cv_sys_sdt_h = yes; then | |
| AC_DEFINE(HAVE_SYS_SDT_H, 1, | |
| [Define to 1 if you have a suitable <sys/sdt.h> header file]) | |
| fi | |
| ]) | |
| dnl | |
| dnl Control whether the library should define symbols for old and new ABIs. | |
| dnl This affects definitions of strings, stringstreams and locale facets. | |
| dnl | |
| dnl --disable-libstdcxx-dual-abi will use old ABI for all types. | |
| dnl | |
| dnl Defines: | |
| dnl _GLIBCXX_USE_DUAL_ABI (always defined, either to 1 or 0) | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_LIBSTDCXX_DUAL_ABI], [ | |
| GLIBCXX_ENABLE(libstdcxx-dual-abi,$1,,[support two versions of std::string]) | |
| if test x$enable_symvers = xgnu-versioned-namespace; then | |
| # gnu-versioned-namespace is incompatible with the dual ABI. | |
| enable_libstdcxx_dual_abi="no" | |
| fi | |
| if test x"$enable_libstdcxx_dual_abi" != xyes; then | |
| AC_MSG_NOTICE([dual ABI is disabled]) | |
| default_libstdcxx_abi="gcc4-compatible" | |
| fi | |
| GLIBCXX_CONDITIONAL(ENABLE_DUAL_ABI, test $enable_libstdcxx_dual_abi = yes) | |
| ]) | |
| dnl | |
| dnl Check to see which ABI should be enabled by default. | |
| dnl | |
| dnl --with-default-libstdcxx-abi={gcc4-compatible,new} | |
| dnl | |
| dnl Defines: | |
| dnl _GLIBCXX_USE_CXX11_ABI (always defined, either to 1 or 0) | |
| dnl | |
| AC_DEFUN([GLIBCXX_DEFAULT_ABI], [ | |
| if test x$enable_libstdcxx_dual_abi = xyes; then | |
| AC_MSG_CHECKING([for default std::string ABI to use]) | |
| AC_ARG_WITH([default-libstdcxx-abi], | |
| AS_HELP_STRING([--with-default-libstdcxx-abi], | |
| [set the std::string ABI to use by default]), | |
| [case "$withval" in | |
| gcc4-compatible) default_libstdcxx_abi="gcc4-compatible" ;; | |
| new|cxx11) default_libstdcxx_abi="new" ;; | |
| c++*|gnu++*) AC_MSG_ERROR([Supported arguments for --with-default-libstdcxx-abi have changed, use "new" or "gcc4-compatible"]) ;; | |
| *) AC_MSG_ERROR([Invalid argument for --with-default-libstdcxx-abi]) ;; | |
| esac | |
| ], | |
| [default_libstdcxx_abi="new"]) | |
| AC_MSG_RESULT(${default_libstdcxx_abi}) | |
| fi | |
| if test $default_libstdcxx_abi = "new"; then | |
| glibcxx_cxx11_abi=1 | |
| glibcxx_cxx98_abi=0 | |
| else | |
| glibcxx_cxx11_abi=0 | |
| glibcxx_cxx98_abi=1 | |
| fi | |
| AC_SUBST(glibcxx_cxx98_abi) | |
| GLIBCXX_CONDITIONAL(ENABLE_CXX11_ABI, test $glibcxx_cxx11_abi = 1) | |
| ]) | |
| dnl | |
| dnl Check to see whether to build libstdc++fs.a | |
| dnl | |
| dnl --enable-libstdcxx-filesystem-ts | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_FILESYSTEM_TS], [ | |
| GLIBCXX_ENABLE(libstdcxx-filesystem-ts,auto,, | |
| [turns on ISO/IEC TS 18822 support], | |
| [permit yes|no|auto]) | |
| AC_MSG_CHECKING([whether to build Filesystem TS support]) | |
| if test x"$ac_cv_header_dirent_h" != x"yes"; then | |
| enable_libstdcxx_filesystem_ts=no | |
| fi | |
| if test x"$enable_libstdcxx_filesystem_ts" = x"auto"; then | |
| case "${target_os}" in | |
| freebsd*|netbsd*|openbsd*|dragonfly*|darwin*) | |
| enable_libstdcxx_filesystem_ts=yes | |
| ;; | |
| gnu* | linux* | kfreebsd*-gnu | knetbsd*-gnu | uclinux*) | |
| enable_libstdcxx_filesystem_ts=yes | |
| ;; | |
| rtems*) | |
| enable_libstdcxx_filesystem_ts=yes | |
| ;; | |
| solaris*) | |
| enable_libstdcxx_filesystem_ts=yes | |
| ;; | |
| mingw*) | |
| enable_libstdcxx_filesystem_ts=yes | |
| ;; | |
| *) | |
| enable_libstdcxx_filesystem_ts=no | |
| ;; | |
| esac | |
| fi | |
| AC_MSG_RESULT($enable_libstdcxx_filesystem_ts) | |
| GLIBCXX_CONDITIONAL(ENABLE_FILESYSTEM_TS, test $enable_libstdcxx_filesystem_ts = yes) | |
| ]) | |
| dnl | |
| dnl Check whether the library calls required by the C++17 Filesystem library | |
| dnl and the Filesystem TS are present. | |
| dnl Defines: | |
| dnl HAVE_STRUCT_DIRENT_D_TYPE | |
| dnl _GLIBCXX_USE_REALPATH | |
| dnl _GLIBCXX_USE_UTIMENSAT | |
| dnl _GLIBCXX_USE_ST_MTIM | |
| dnl _GLIBCXX_USE_FCHMOD | |
| dnl _GLIBCXX_USE_FCHMODAT | |
| dnl _GLIBCXX_USE_COPY_FILE_RANGE | |
| dnl _GLIBCXX_USE_SENDFILE | |
| dnl HAVE_LINK | |
| dnl HAVE_LSEEK | |
| dnl HAVE_READLINK | |
| dnl HAVE_SYMLINK | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_FILESYSTEM_DEPS], [dnl | |
| dnl | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -fno-exceptions" | |
| dnl | |
| AC_CACHE_CHECK([for struct dirent.d_type], glibcxx_cv_dirent_d_type, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <dirent.h>], | |
| [ | |
| struct dirent d; | |
| if (sizeof d.d_type) return 0; | |
| ], | |
| [glibcxx_cv_dirent_d_type=yes], | |
| [glibcxx_cv_dirent_d_type=no]) | |
| ]) | |
| if test $glibcxx_cv_dirent_d_type = yes; then | |
| AC_DEFINE(HAVE_STRUCT_DIRENT_D_TYPE, 1, [Define to 1 if `d_type' is a member of `struct dirent'.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for chmod], glibcxx_cv_chmod, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [ | |
| #include <sys/stat.h> | |
| ], | |
| [ | |
| int i = chmod("", S_IRUSR); | |
| ], | |
| [glibcxx_cv_chmod=yes], | |
| [glibcxx_cv_chmod=no]) | |
| ]) | |
| if test $glibcxx_cv_chmod = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_CHMOD, 1, [Define if usable chmod is available in <sys/stat.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for mkdir], glibcxx_cv_mkdir, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [ | |
| #include <sys/stat.h> | |
| ], | |
| [ | |
| int i = mkdir("", S_IRUSR); | |
| ], | |
| [glibcxx_cv_mkdir=yes], | |
| [glibcxx_cv_mkdir=no]) | |
| ]) | |
| if test $glibcxx_cv_mkdir = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_MKDIR, 1, [Define if usable mkdir is available in <sys/stat.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for chdir], glibcxx_cv_chdir, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [ | |
| #include <unistd.h> | |
| ], | |
| [ | |
| int i = chdir(""); | |
| ], | |
| [glibcxx_cv_chdir=yes], | |
| [glibcxx_cv_chdir=no]) | |
| ]) | |
| if test $glibcxx_cv_chdir = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_CHDIR, 1, [Define if usable chdir is available in <unistd.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for getcwd], glibcxx_cv_getcwd, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [ | |
| #include <unistd.h> | |
| ], | |
| [ | |
| char* s = getcwd((char*)0, 1); | |
| ], | |
| [glibcxx_cv_getcwd=yes], | |
| [glibcxx_cv_getcwd=no]) | |
| ]) | |
| if test $glibcxx_cv_getcwd = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_GETCWD, 1, [Define if usable getcwd is available in <unistd.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for realpath], glibcxx_cv_realpath, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [ | |
| #include <limits.h> | |
| #include <stdlib.h> | |
| #include <unistd.h> | |
| ], | |
| [ | |
| #if _XOPEN_VERSION < 500 | |
| #error | |
| #elif _XOPEN_VERSION >= 700 || defined(PATH_MAX) | |
| char *tmp = realpath((const char*)NULL, (char*)NULL); | |
| #else | |
| #error | |
| #endif | |
| ], | |
| [glibcxx_cv_realpath=yes], | |
| [glibcxx_cv_realpath=no]) | |
| ]) | |
| if test $glibcxx_cv_realpath = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_REALPATH, 1, [Define if usable realpath is available in <stdlib.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for utimensat], glibcxx_cv_utimensat, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [ | |
| #include <fcntl.h> | |
| #include <sys/stat.h> | |
| ], | |
| [ | |
| struct timespec ts[2] = { { 0, UTIME_OMIT }, { 1, 1 } }; | |
| int i = utimensat(AT_FDCWD, "path", ts, 0); | |
| ], | |
| [glibcxx_cv_utimensat=yes], | |
| [glibcxx_cv_utimensat=no]) | |
| ]) | |
| if test $glibcxx_cv_utimensat = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_UTIMENSAT, 1, [Define if utimensat and UTIME_OMIT are available in <sys/stat.h> and AT_FDCWD in <fcntl.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for utime], glibcxx_cv_utime, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [ | |
| #include <utime.h> | |
| ], | |
| [ | |
| struct utimbuf t = { 1, 1 }; | |
| int i = utime("path", &t); | |
| ], | |
| [glibcxx_cv_utime=yes], | |
| [glibcxx_cv_utime=no]) | |
| ]) | |
| if test $glibcxx_cv_utime = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_UTIME, 1, [Define if utime is available in <utime.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for lstat], glibcxx_cv_lstat, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [ #include <sys/stat.h> ], | |
| [ | |
| struct stat st; | |
| int i = lstat("path", &st); | |
| ], | |
| [glibcxx_cv_lstat=yes], | |
| [glibcxx_cv_lstat=no]) | |
| ]) | |
| if test $glibcxx_cv_lstat = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_LSTAT, 1, [Define if lstat is available in <sys/stat.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for struct stat.st_mtim.tv_nsec], | |
| glibcxx_cv_st_mtim, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [ #include <sys/stat.h> ], | |
| [ | |
| struct stat st; | |
| return st.st_mtim.tv_nsec; | |
| ], | |
| [glibcxx_cv_st_mtim=yes], | |
| [glibcxx_cv_st_mtim=no]) | |
| ]) | |
| if test $glibcxx_cv_st_mtim = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_ST_MTIM, 1, [Define if struct stat has timespec members.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for fchmod], | |
| glibcxx_cv_fchmod, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <sys/stat.h>], | |
| [fchmod(1, S_IWUSR);], | |
| [glibcxx_cv_fchmod=yes], | |
| [glibcxx_cv_fchmod=no]) | |
| ]) | |
| if test $glibcxx_cv_fchmod = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_FCHMOD, 1, [Define if fchmod is available in <sys/stat.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for fchmodat], | |
| glibcxx_cv_fchmodat, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [ | |
| #include <fcntl.h> | |
| #include <sys/stat.h> | |
| ], | |
| [fchmodat(AT_FDCWD, "", 0, AT_SYMLINK_NOFOLLOW);], | |
| [glibcxx_cv_fchmodat=yes], | |
| [glibcxx_cv_fchmodat=no]) | |
| ]) | |
| if test $glibcxx_cv_fchmodat = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_FCHMODAT, 1, [Define if fchmodat is available in <sys/stat.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for link], | |
| glibcxx_cv_link, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <unistd.h>], | |
| [link("", "");], | |
| [glibcxx_cv_link=yes], | |
| [glibcxx_cv_link=no]) | |
| ]) | |
| if test $glibcxx_cv_link = yes; then | |
| AC_DEFINE(HAVE_LINK, 1, [Define if link is available in <unistd.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for lseek], | |
| glibcxx_cv_lseek, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <unistd.h>], | |
| [lseek(1, 0, SEEK_SET);], | |
| [glibcxx_cv_lseek=yes], | |
| [glibcxx_cv_lseek=no]) | |
| ]) | |
| if test $glibcxx_cv_lseek = yes; then | |
| AC_DEFINE(HAVE_LSEEK, 1, [Define if lseek is available in <unistd.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for readlink], | |
| glibcxx_cv_readlink, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <unistd.h>], | |
| [char buf[32]; readlink("", buf, sizeof(buf));], | |
| [glibcxx_cv_readlink=yes], | |
| [glibcxx_cv_readlink=no]) | |
| ]) | |
| if test $glibcxx_cv_readlink = yes; then | |
| AC_DEFINE(HAVE_READLINK, 1, [Define if readlink is available in <unistd.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for symlink], | |
| glibcxx_cv_symlink, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <unistd.h>], | |
| [symlink("", "");], | |
| [glibcxx_cv_symlink=yes], | |
| [glibcxx_cv_symlink=no]) | |
| ]) | |
| if test $glibcxx_cv_symlink = yes; then | |
| AC_DEFINE(HAVE_SYMLINK, 1, [Define if symlink is available in <unistd.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for truncate], | |
| glibcxx_cv_truncate, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <unistd.h>], | |
| [truncate("", 99);], | |
| [glibcxx_cv_truncate=yes], | |
| [glibcxx_cv_truncate=no]) | |
| ]) | |
| if test $glibcxx_cv_truncate = yes; then | |
| AC_DEFINE(HAVE_TRUNCATE, 1, [Define if truncate is available in <unistd.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for copy_file_range that can copy files], | |
| glibcxx_cv_copy_file_range, [dnl | |
| case "${target_os}" in | |
| linux*) | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <unistd.h>], | |
| [copy_file_range(1, (loff_t*)nullptr, 2, (loff_t*)nullptr, 1, 0);], | |
| [glibcxx_cv_copy_file_range=yes], | |
| [glibcxx_cv_copy_file_range=no]) | |
| ;; | |
| *) | |
| glibcxx_cv_copy_file_range=no | |
| ;; | |
| esac | |
| ]) | |
| if test $glibcxx_cv_copy_file_range = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_COPY_FILE_RANGE, 1, [Define if copy_file_range is available in <unistd.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for sendfile that can copy files], | |
| glibcxx_cv_sendfile, [dnl | |
| case "${target_os}" in | |
| gnu* | linux* | solaris* | uclinux*) | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <sys/sendfile.h>], | |
| [sendfile(1, 2, (off_t*)0, sizeof 1);], | |
| [glibcxx_cv_sendfile=yes], | |
| [glibcxx_cv_sendfile=no]) | |
| ;; | |
| *) | |
| glibcxx_cv_sendfile=no | |
| ;; | |
| esac | |
| ]) | |
| if test $glibcxx_cv_sendfile = yes && test $glibcxx_cv_lseek = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_SENDFILE, 1, [Define if sendfile is available in <sys/sendfile.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for fdopendir], | |
| glibcxx_cv_fdopendir, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <dirent.h>], | |
| [::DIR* dir = ::fdopendir(1);], | |
| [glibcxx_cv_fdopendir=yes], | |
| [glibcxx_cv_fdopendir=no]) | |
| ]) | |
| if test $glibcxx_cv_fdopendir = yes; then | |
| AC_DEFINE(HAVE_FDOPENDIR, 1, [Define if fdopendir is available in <dirent.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for dirfd], | |
| glibcxx_cv_dirfd, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <dirent.h>], | |
| [int fd = ::dirfd((::DIR*)0);], | |
| [glibcxx_cv_dirfd=yes], | |
| [glibcxx_cv_dirfd=no]) | |
| ]) | |
| if test $glibcxx_cv_dirfd = yes; then | |
| AC_DEFINE(HAVE_DIRFD, 1, [Define if dirfd is available in <dirent.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for openat], | |
| glibcxx_cv_openat, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <fcntl.h>], | |
| [int fd = ::openat(AT_FDCWD, "", 0);], | |
| [glibcxx_cv_openat=yes], | |
| [glibcxx_cv_openat=no]) | |
| ]) | |
| if test $glibcxx_cv_openat = yes; then | |
| AC_DEFINE(HAVE_OPENAT, 1, [Define if openat is available in <fcntl.h>.]) | |
| fi | |
| dnl | |
| AC_CACHE_CHECK([for unlinkat], | |
| glibcxx_cv_unlinkat, [dnl | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <fcntl.h> | |
| #include <unistd.h>], | |
| [::unlinkat(AT_FDCWD, "", AT_REMOVEDIR);], | |
| [glibcxx_cv_unlinkat=yes], | |
| [glibcxx_cv_unlinkat=no]) | |
| ]) | |
| if test $glibcxx_cv_unlinkat = yes; then | |
| AC_DEFINE(HAVE_UNLINKAT, 1, [Define if unlinkat is available in <fcntl.h>.]) | |
| fi | |
| dnl | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check how size_t is mangled. Copied from libitm. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_SIZE_T_MANGLING], [ | |
| AC_CACHE_CHECK([how size_t is mangled], | |
| glibcxx_cv_size_t_mangling, [ | |
| AC_TRY_COMPILE([], [extern __SIZE_TYPE__ x; extern unsigned long x;], | |
| [glibcxx_cv_size_t_mangling=m], [ | |
| AC_TRY_COMPILE([], [extern __SIZE_TYPE__ x; extern unsigned int x;], | |
| [glibcxx_cv_size_t_mangling=j], [ | |
| AC_TRY_COMPILE([], | |
| [extern __SIZE_TYPE__ x; extern unsigned long long x;], | |
| [glibcxx_cv_size_t_mangling=y], [ | |
| AC_TRY_COMPILE([], | |
| [extern __SIZE_TYPE__ x; extern unsigned short x;], | |
| [glibcxx_cv_size_t_mangling=t], [ | |
| AC_TRY_COMPILE([], | |
| [extern __SIZE_TYPE__ x; extern __int20 unsigned x;], | |
| [glibcxx_cv_size_t_mangling=u6uint20], | |
| [glibcxx_cv_size_t_mangling=x]) | |
| ]) | |
| ]) | |
| ]) | |
| ]) | |
| ]) | |
| if test $glibcxx_cv_size_t_mangling = x; then | |
| AC_MSG_ERROR([Unknown underlying type for size_t]) | |
| fi | |
| AC_DEFINE_UNQUOTED(_GLIBCXX_MANGLE_SIZE_T, [$glibcxx_cv_size_t_mangling], | |
| [Define to the letter to which size_t is mangled.]) | |
| ]) | |
| dnl | |
| dnl Determine whether std::exception_ptr symbols should be exported with | |
| dnl the symbol versions from GCC 4.6.0 or GCC 7.1.0, depending on which | |
| dnl release first added support for std::exception_ptr. Originally it was | |
| dnl only supported for targets with always-lock-free atomics for int, but | |
| dnl since GCC 7.1 it is supported for all targets. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_EXCEPTION_PTR_SYMVER], [ | |
| if test $enable_symvers != no; then | |
| AC_MSG_CHECKING([for first version to support std::exception_ptr]) | |
| case ${target} in | |
| aarch64-*-* | alpha-*-* | hppa*-*-* | i?86-*-* | x86_64-*-* | \ | |
| m68k-*-* | powerpc*-*-* | s390*-*-* | *-*-solaris* ) | |
| ac_exception_ptr_since_gcc46=yes | |
| ;; | |
| *) | |
| # If the value of this macro changes then we will need to hardcode | |
| # yes/no here for additional targets based on the original value. | |
| AC_TRY_COMPILE([], [ | |
| #if __GCC_ATOMIC_INT_LOCK_FREE <= 1 | |
| # error atomic int not always lock free | |
| #endif | |
| ], | |
| [ac_exception_ptr_since_gcc46=yes], | |
| [ac_exception_ptr_since_gcc46=no]) | |
| ;; | |
| esac | |
| if test x"$ac_exception_ptr_since_gcc46" = x"yes" ; then | |
| AC_DEFINE(HAVE_EXCEPTION_PTR_SINCE_GCC46, 1, | |
| [Define to 1 if GCC 4.6 supported std::exception_ptr for the target]) | |
| AC_MSG_RESULT([4.6.0]) | |
| else | |
| AC_MSG_RESULT([7.1.0]) | |
| fi | |
| fi | |
| ]) | |
| dnl | |
| dnl Check whether getentropy is present in <unistd.h>. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_GETENTROPY], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| AC_CACHE_CHECK([for getentropy], glibcxx_cv_getentropy, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <unistd.h>], | |
| [unsigned i; | |
| ::getentropy(&i, sizeof(i));], | |
| [glibcxx_cv_getentropy=yes], [glibcxx_cv_getentropy=no]) | |
| ]) | |
| if test $glibcxx_cv_getentropy = yes; then | |
| AC_DEFINE(HAVE_GETENTROPY, 1, [Define if getentropy is available in <unistd.h>.]) | |
| fi | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether arc4random is present in <stdlib.h>. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_ARC4RANDOM], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| AC_CACHE_CHECK([for arc4random], glibcxx_cv_arc4random, [ | |
| GCC_TRY_COMPILE_OR_LINK( | |
| [#include <stdlib.h>], | |
| [unsigned i = ::arc4random();], | |
| [glibcxx_cv_arc4random=yes], [glibcxx_cv_arc4random=no]) | |
| ]) | |
| if test $glibcxx_cv_arc4random = yes; then | |
| AC_DEFINE(HAVE_ARC4RANDOM, 1, [Define if arc4random is available in <stdlib.h>.]) | |
| fi | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check to see whether to build libstdc++_libbacktrace.a | |
| dnl | |
| dnl --enable-libstdcxx-backtrace | |
| dnl | |
| AC_DEFUN([GLIBCXX_ENABLE_BACKTRACE], [ | |
| GLIBCXX_ENABLE(libstdcxx-backtrace,auto,, | |
| [turns on libbacktrace support], | |
| [permit yes|no|auto]) | |
| # Most of this is adapted from libsanitizer/configure.ac | |
| BACKTRACE_CPPFLAGS="-D_GNU_SOURCE" | |
| # libbacktrace only needs atomics for int, which we've already tested | |
| if test "$glibcxx_cv_atomic_int" = "yes"; then | |
| BACKTRACE_CPPFLAGS="$BACKTRACE_CPPFLAGS -DHAVE_ATOMIC_FUNCTIONS=1" | |
| fi | |
| # Test for __sync support. | |
| AC_CACHE_CHECK([__sync extensions], | |
| [glibcxx_cv_sys_sync], | |
| [GCC_TRY_COMPILE_OR_LINK( | |
| [int i;], | |
| [__sync_bool_compare_and_swap (&i, i, i); | |
| __sync_lock_test_and_set (&i, 1); | |
| __sync_lock_release (&i);], | |
| [glibcxx_cv_sys_sync=yes], | |
| [glibcxx_cv_sys_sync=no]) | |
| ]) | |
| if test "$glibcxx_cv_sys_sync" = "yes"; then | |
| BACKTRACE_CPPFLAGS="$BACKTRACE_CPPFLAGS -DHAVE_SYNC_FUNCTIONS=1" | |
| fi | |
| # Check for dl_iterate_phdr. | |
| AC_CHECK_HEADERS(link.h) | |
| if test "$ac_cv_header_link_h" = "no"; then | |
| have_dl_iterate_phdr=no | |
| else | |
| # When built as a GCC target library, we can't do a link test. | |
| ac_save_CPPFLAGS="$CPPFLAGS" | |
| CPPFLAGS="$CPPFLAGS -D_GNU_SOURCE" | |
| AC_EGREP_HEADER([dl_iterate_phdr], [link.h], [have_dl_iterate_phdr=yes], | |
| [have_dl_iterate_phdr=no]) | |
| CPPFLAGS="$ac_save_CPPFLAGS" | |
| fi | |
| if test "$have_dl_iterate_phdr" = "yes"; then | |
| BACKTRACE_CPPFLAGS="$BACKTRACE_CPPFLAGS -DHAVE_DL_ITERATE_PHDR=1" | |
| fi | |
| AC_CHECK_HEADERS(windows.h) | |
| AC_CHECK_HEADERS(tlhelp32.h, [], [], | |
| [#ifdef HAVE_WINDOWS_H | |
| # include <windows.h> | |
| #endif | |
| ]) | |
| # Check for the fcntl function. | |
| if test -n "${with_target_subdir}"; then | |
| case "${host}" in | |
| *-*-mingw*) have_fcntl=no ;; | |
| *) have_fcntl=yes ;; | |
| esac | |
| else | |
| AC_CHECK_FUNC(fcntl, [have_fcntl=yes], [have_fcntl=no]) | |
| fi | |
| if test "$have_fcntl" = "yes"; then | |
| BACKTRACE_CPPFLAGS="$BACKTRACE_CPPFLAGS -DHAVE_FCNTL=1" | |
| fi | |
| AC_CHECK_DECLS(strnlen) | |
| # Check for getexecname function. | |
| if test -n "${with_target_subdir}"; then | |
| case "${host}" in | |
| *-*-solaris2*) have_getexecname=yes ;; | |
| *) have_getexecname=no ;; | |
| esac | |
| else | |
| AC_CHECK_FUNC(getexecname, [have_getexecname=yes], [have_getexecname=no]) | |
| fi | |
| if test "$have_getexecname" = "yes"; then | |
| BACKTRACE_CPPFLAGS="$BACKTRACE_CPPFLAGS -DHAVE_GETEXECNAME=1" | |
| fi | |
| # The library needs to be able to read the executable itself. Compile | |
| # a file to determine the executable format. The awk script | |
| # filetype.awk prints out the file type. | |
| AC_CACHE_CHECK([output filetype], | |
| [glibcxx_cv_sys_filetype], | |
| [filetype= | |
| AC_COMPILE_IFELSE( | |
| [AC_LANG_PROGRAM([int i;], [int j;])], | |
| [filetype=`${AWK} -f $srcdir/../libbacktrace/filetype.awk conftest.$ac_objext`], | |
| [AC_MSG_FAILURE([compiler failed])]) | |
| glibcxx_cv_sys_filetype=$filetype]) | |
| # Match the file type to decide what files to compile. | |
| FORMAT_FILE= | |
| case "$glibcxx_cv_sys_filetype" in | |
| elf*) FORMAT_FILE="elf.lo" ;; | |
| pecoff*) FORMAT_FILE="pecoff.lo" ;; | |
| *) AC_MSG_WARN([could not determine output file type]) | |
| FORMAT_FILE="unknown.lo" | |
| enable_libstdcxx_backtrace=no | |
| ;; | |
| esac | |
| AC_SUBST(FORMAT_FILE) | |
| # ELF defines. | |
| elfsize= | |
| case "$glibcxx_cv_sys_filetype" in | |
| elf32) elfsize=32 ;; | |
| elf64) elfsize=64 ;; | |
| esac | |
| BACKTRACE_CPPFLAGS="$BACKTRACE_CPPFLAGS -DBACKTRACE_ELF_SIZE=$elfsize" | |
| AC_MSG_CHECKING([whether to build libbacktrace support]) | |
| if test "$enable_libstdcxx_backtrace" = "auto"; then | |
| case "$host" in | |
| avr-*-*) enable_libstdcxx_backtrace=no ;; | |
| *) enable_libstdcxx_backtrace="$is_hosted" ;; | |
| esac | |
| fi | |
| AC_MSG_RESULT($enable_libstdcxx_backtrace) | |
| if test "$enable_libstdcxx_backtrace" = "yes"; then | |
| BACKTRACE_SUPPORTED=1 | |
| AC_CHECK_HEADERS(sys/mman.h) | |
| case "${host}" in | |
| *-*-msdosdjgpp) # DJGPP has sys/man.h, but no mmap | |
| have_mmap=no ;; | |
| *-*-*) | |
| have_mmap="$ac_cv_header_sys_mman_h" ;; | |
| esac | |
| if test "$have_mmap" = "no"; then | |
| VIEW_FILE=read.lo | |
| ALLOC_FILE=alloc.lo | |
| else | |
| VIEW_FILE=mmapio.lo | |
| AC_PREPROC_IFELSE([AC_LANG_SOURCE([ | |
| #include <sys/mman.h> | |
| #if !defined(MAP_ANONYMOUS) && !defined(MAP_ANON) | |
| #error no MAP_ANONYMOUS | |
| #endif | |
| ])], [ALLOC_FILE=mmap.lo], [ALLOC_FILE=alloc.lo]) | |
| fi | |
| AC_SUBST(VIEW_FILE) | |
| AC_SUBST(ALLOC_FILE) | |
| BACKTRACE_USES_MALLOC=0 | |
| if test "$ALLOC_FILE" = "alloc.lo"; then | |
| BACKTRACE_USES_MALLOC=1 | |
| fi | |
| if test "$ac_has_gthreads" = "yes"; then | |
| BACKTRACE_SUPPORTS_THREADS=1 | |
| else | |
| BACKTRACE_SUPPORTS_THREADS=0 | |
| fi | |
| AC_SUBST(BACKTRACE_CPPFLAGS) | |
| AC_SUBST(BACKTRACE_SUPPORTED) | |
| AC_SUBST(BACKTRACE_USES_MALLOC) | |
| AC_SUBST(BACKTRACE_SUPPORTS_THREADS) | |
| AC_DEFINE(HAVE_STACKTRACE, 1, [Define if the <stacktrace> header is supported.]) | |
| else | |
| BACKTRACE_SUPPORTED=0 | |
| BACKTRACE_USES_MALLOC=0 | |
| BACKTRACE_SUPPORTS_THREADS=0 | |
| fi | |
| GLIBCXX_CONDITIONAL(ENABLE_BACKTRACE, [test "$enable_libstdcxx_backtrace" = yes]) | |
| ]) | |
| dnl | |
| dnl Allow the emergency EH pool to be configured. | |
| dnl | |
| dnl --enable-libstdcxx-static-eh-pool will cause a fixed-size static buffer | |
| dnl to be used for allocating exceptions after malloc fails. The default is | |
| dnl to allocate a buffer using malloc | |
| dnl | |
| dnl --with-libstdcxx-eh-pool-obj-count=N will set the default size for the | |
| dnl buffer. For a static buffer that size is fixed permanently. For a dynamic | |
| dnl buffer it's the default, but it can be overridden from the environment. | |
| dnl | |
| dnl To set the default to approximately the same values as GCC 12, | |
| dnl use --with-libstdcxx-eh-pool-obj-count=94 for 32-bit targets, | |
| dnl and --with-libstdcxx-eh-pool-obj-count=252 for 64-bit targets. | |
| dnl | |
| dnl Defines: | |
| dnl _GLIBCXX_EH_POOL_STATIC if a fixed-size static buffer should be used | |
| dnl instead of allocating a buffer on startup. | |
| dnl _GLIBCXX_EH_POOL_NOBJS to override the default EMERGENCY_OBJ_COUNT value. | |
| dnl | |
| AC_DEFUN([GLIBCXX_EMERGENCY_EH_ALLOC], [ | |
| eh_pool_static= | |
| eh_pool_nobjs= | |
| AC_ARG_ENABLE([libstdcxx-static-eh-pool], | |
| AC_HELP_STRING([--enable-libstdcxx-static-eh-pool], | |
| [use a fixed-size static buffer for allocating exceptions if malloc fails]), | |
| [if test "${enableval}" = yes; then | |
| eh_pool_static="-D_GLIBCXX_EH_POOL_STATIC" | |
| AC_MSG_NOTICE([EH pool using static buffer]) | |
| fi],) | |
| AC_ARG_WITH([libstdcxx-eh-pool-obj-count], | |
| AC_HELP_STRING([--with-libstdcxx-eh-pool-obj-count], | |
| [the number of exceptions that can be allocated from the pool if malloc fails]), | |
| [if test "${withval}" -ge 0 2>/dev/null; then | |
| eh_pool_obj_count="-D_GLIBCXX_EH_POOL_NOBJS=${withval}" | |
| AC_MSG_NOTICE([EH pool object count: ${withval}]) | |
| else | |
| AC_MSG_ERROR([EH pool obj count must be a non-negative integer: $withval]) | |
| fi],) | |
| EH_POOL_FLAGS="$eh_pool_static $eh_pool_obj_count" | |
| AC_SUBST(EH_POOL_FLAGS) | |
| ]) | |
| dnl | |
| dnl Allow the location of tzdata files to be configured. | |
| dnl | |
| dnl --with-libstdcxx-zoneinfo=ARG where ARG can be: | |
| dnl DIR - use DIR/tzdata.zi and DIR/leapseconds files. | |
| dnl static - use static copy of tzdata.zi embedded in the library. | |
| dnl DIR,static - use DIR, but use embedded static copy as fallback. | |
| dnl yes - equivalent to DIR,static with a system-specific value for DIR. | |
| dnl no - disable most tzdb functionality. | |
| dnl | |
| dnl Defines: | |
| dnl _GLIBCXX_ZONEINFO_DIR if std::chrono::tzdb should use the specified | |
| dnl directory for the tzdata.zi and leapseconds files. | |
| dnl _GLIBCXX_STATIC_TZDATA if std::chrono::tzdb should use an embedded | |
| dnl static copy of the tzdata.zi file. | |
| dnl | |
| AC_DEFUN([GLIBCXX_ZONEINFO_DIR], [ | |
| AC_ARG_WITH([libstdcxx-zoneinfo], | |
| AC_HELP_STRING([--with-libstdcxx-zoneinfo], | |
| [the location to use for tzdata]), | |
| [],[with_libstdcxx_zoneinfo=yes]) | |
| if test "x${with_libstdcxx_zoneinfo}" = xyes; then | |
| # Pick a default when no specific path is set. | |
| case "$target_os" in | |
| gnu* | linux* | kfreebsd*-gnu | knetbsd*-gnu) | |
| # Not all distros ship tzdata.zi in this dir. | |
| zoneinfo_dir="/usr/share/zoneinfo" | |
| ;; | |
| aix*) | |
| # Binary tzfile files are in /usr/share/lib/zoneinfo | |
| # but tzdata.zi is not present there. | |
| zoneinfo_dir=none | |
| ;; | |
| darwin2*) | |
| # Binary tzfile files are in /usr/share/lib/zoneinfo.default | |
| # but tzdata.zi is not present there. | |
| zoneinfo_dir=none | |
| ;; | |
| *) | |
| # Binary tzfile files are commonly found in /usr/share/zoneinfo | |
| # but tzdata.zi is not present there. | |
| zoneinfo_dir=none | |
| ;; | |
| esac | |
| AC_COMPUTE_INT(glibcxx_cv_at_least_32bit, [__INTPTR_WIDTH__ >= 32]) | |
| if test "$glibcxx_cv_at_least_32bit" -ne 0; then | |
| # Also embed a copy of the tzdata.zi file as a static string. | |
| embed_zoneinfo=yes | |
| else | |
| # The embedded data is too large for 16-bit targets. | |
| embed_zoneinfo=no | |
| fi | |
| elif test "x${with_libstdcxx_zoneinfo}" = xno; then | |
| # Disable tzdb support completely. | |
| zoneinfo_dir=none | |
| embed_zoneinfo=no | |
| else | |
| case "${with_libstdcxx_zoneinfo}" in | |
| static) | |
| # Do not attempt to read from disk, always use embedded data. | |
| zoneinfo_dir=none | |
| embed_zoneinfo=yes | |
| ;; | |
| static,* | *,static) | |
| # Try to read from disk, use embedded data as fallback. | |
| zoneinfo_dir="${with_libstdcxx_zoneinfo#static,}" | |
| zoneinfo_dir="${with_libstdcxx_zoneinfo%,static}" | |
| embed_zoneinfo=yes | |
| ;; | |
| *) | |
| zoneinfo_dir="${with_libstdcxx_zoneinfo}" | |
| embed_zoneinfo=no | |
| ;; | |
| esac | |
| fi | |
| AC_MSG_NOTICE([zoneinfo data directory: ${zoneinfo_dir}]) | |
| if test "x${zoneinfo_dir}" != xnone; then | |
| AC_DEFINE_UNQUOTED(_GLIBCXX_ZONEINFO_DIR, "${zoneinfo_dir}", | |
| [Define if a directory should be searched for tzdata files.]) | |
| if $GLIBCXX_IS_NATIVE && ! test -f "$zoneinfo_dir/tzdata.zi"; then | |
| AC_MSG_WARN("$zoneinfo_dir does not contain tzdata.zi file") | |
| fi | |
| fi | |
| GLIBCXX_CONDITIONAL(USE_STATIC_TZDATA, test "${embed_zoneinfo}" = yes) | |
| if test "x${embed_zoneinfo}" = xyes; then | |
| AC_MSG_NOTICE([static tzdata.zi file will be compiled into the library]) | |
| AC_DEFINE_UNQUOTED(_GLIBCXX_STATIC_TZDATA, 1, | |
| [Define if static tzdata should be compiled into the library.]) | |
| fi | |
| ]) | |
| dnl | |
| dnl Check for a tm_zone member in struct tm. | |
| dnl | |
| dnl This member is defined as const char* in Glibc, newlib, POSIX.1-2024, | |
| dnl and as char* in BSD (including macOS). | |
| dnl | |
| dnl Defines: | |
| dnl _GLIBCXX_USE_STRUCT_TM_TM_ZONE if struct tm has a tm_zone member. | |
| dnl | |
| AC_DEFUN([GLIBCXX_STRUCT_TM_TM_ZONE], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| ac_save_CXXFLAGS="$CXXFLAGS" | |
| CXXFLAGS="$CXXFLAGS -std=c++20" | |
| AC_CACHE_CHECK([for tm_zone member of struct tm], glibcxx_cv_tm_zone, [ | |
| AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include <time.h> | |
| ], | |
| [struct tm t{}; t.tm_zone = (char*)0;] | |
| )], | |
| [glibcxx_cv_tm_zone=yes], | |
| [glibcxx_cv_tm_zone=no] | |
| ) | |
| ]) | |
| if test $glibcxx_cv_tm_zone = yes; then | |
| AC_DEFINE(_GLIBCXX_USE_STRUCT_TM_TM_ZONE, 1, | |
| [Define if struct tm has a tm_zone member.]) | |
| fi | |
| CXXFLAGS="$ac_save_CXXFLAGS" | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether lock tables can be aligned to avoid false sharing. | |
| dnl | |
| dnl Defines: | |
| dnl _GLIBCXX_CAN_ALIGNAS_DESTRUCTIVE_SIZE if objects with static storage | |
| dnl duration can be aligned to std::hardware_destructive_interference_size. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_ALIGNAS_CACHELINE], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| AC_MSG_CHECKING([whether static objects can be aligned to the cacheline size]) | |
| AC_TRY_COMPILE(, [struct alignas(__GCC_DESTRUCTIVE_SIZE) Aligned { }; | |
| alignas(Aligned) static char buf[sizeof(Aligned) * 16]; | |
| ], [ac_alignas_cacheline=yes], [ac_alignas_cacheline=no]) | |
| if test "$ac_alignas_cacheline" = yes; then | |
| AC_DEFINE_UNQUOTED(_GLIBCXX_CAN_ALIGNAS_DESTRUCTIVE_SIZE, 1, | |
| [Define if global objects can be aligned to | |
| std::hardware_destructive_interference_size.]) | |
| fi | |
| AC_MSG_RESULT($ac_alignas_cacheline) | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether iostream initialization should be done in the library, | |
| dnl using the init_priority attribute. | |
| dnl | |
| dnl Defines: | |
| dnl _GLIBCXX_USE_INIT_PRIORITY_ATTRIBUTE if GCC supports the init_priority | |
| dnl attribute for the target. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_INIT_PRIORITY], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| AC_MSG_CHECKING([whether init_priority attribute is supported]) | |
| AC_TRY_COMPILE(, [ | |
| #if ! __has_attribute(init_priority) | |
| #error init_priority not supported | |
| #endif | |
| ], [ac_init_priority=yes], [ac_init_priority=no]) | |
| if test "$ac_init_priority" = yes; then | |
| AC_DEFINE_UNQUOTED(_GLIBCXX_USE_INIT_PRIORITY_ATTRIBUTE, 1, | |
| [Define if init_priority should be used for iostream initialization.]) | |
| fi | |
| AC_MSG_RESULT($ac_init_priority) | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether the Windows CRT function _get_osfhandle is available. | |
| dnl | |
| dnl Defines: | |
| dnl _GLIBCXX_USE__GET_OSFHANDLE if _get_osfhandle is in <io.h> for Windows. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_FILEBUF_NATIVE_HANDLES], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| AC_MSG_CHECKING([whether _get_osfhandle is defined in <io.h>]) | |
| AC_TRY_COMPILE([ | |
| #if defined(_WIN32) && !defined(__CYGWIN__) | |
| # include <stdint.h> | |
| # include <stdio.h> | |
| # include <io.h> | |
| #endif | |
| ],[ | |
| FILE* file = 0; | |
| int fd = fileno(file); | |
| intptr_t crt_handle = _get_osfhandle(fd); | |
| void* win32_handle = reinterpret_cast<void*>(crt_handle); | |
| ], [ac_get_osfhandle=yes], [ac_get_osfhandle=no]) | |
| if test "$ac_get_osfhandle" = yes; then | |
| AC_DEFINE_UNQUOTED(_GLIBCXX_USE__GET_OSFHANDLE, 1, | |
| [Define if _get_osfhandle should be used for filebuf::native_handle().]) | |
| fi | |
| AC_MSG_RESULT($ac_get_osfhandle) | |
| AC_LANG_RESTORE | |
| ]) | |
| dnl | |
| dnl Check whether the dependencies for std::text_encoding are available. | |
| dnl | |
| dnl Defines: | |
| dnl _GLIBCXX_USE_NL_LANGINFO_L if nl_langinfo_l is in <langinfo.h>. | |
| dnl | |
| AC_DEFUN([GLIBCXX_CHECK_TEXT_ENCODING], [ | |
| AC_LANG_SAVE | |
| AC_LANG_CPLUSPLUS | |
| AC_MSG_CHECKING([whether nl_langinfo_l is defined in <langinfo.h>]) | |
| AC_TRY_COMPILE([ | |
| #include <locale.h> | |
| #if __has_include(<xlocale.h>) | |
| # include <xlocale.h> | |
| #endif | |
| #include <langinfo.h> | |
| ],[ | |
| locale_t loc = newlocale(LC_ALL_MASK, "", (locale_t)0); | |
| const char* enc = nl_langinfo_l(CODESET, loc); | |
| freelocale(loc); | |
| ], [ac_nl_langinfo_l=yes], [ac_nl_langinfo_l=no]) | |
| AC_MSG_RESULT($ac_nl_langinfo_l) | |
| if test "$ac_nl_langinfo_l" = yes; then | |
| AC_DEFINE_UNQUOTED(_GLIBCXX_USE_NL_LANGINFO_L, 1, | |
| [Define if nl_langinfo_l should be used for std::text_encoding.]) | |
| fi | |
| AC_LANG_RESTORE | |
| ]) | |
| # Macros from the top-level gcc directory. | |
| m4_include([../config/gc++filt.m4]) | |
| m4_include([../config/tls.m4]) | |
| m4_include([../config/gthr.m4]) | |
| m4_include([../config/cet.m4]) |