| /* dwarf.c -- Get file/line information from DWARF for backtraces. | |
| Copyright (C) 2012-2026 Free Software Foundation, Inc. | |
| Written by Ian Lance Taylor, Google. | |
| Redistribution and use in source and binary forms, with or without | |
| modification, are permitted provided that the following conditions are | |
| met: | |
| (1) Redistributions of source code must retain the above copyright | |
| notice, this list of conditions and the following disclaimer. | |
| (2) Redistributions in binary form must reproduce the above copyright | |
| notice, this list of conditions and the following disclaimer in | |
| the documentation and/or other materials provided with the | |
| distribution. | |
| (3) The name of the author may not be used to | |
| endorse or promote products derived from this software without | |
| specific prior written permission. | |
| THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR | |
| IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED | |
| WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
| DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, | |
| INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
| (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
| SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | |
| IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| POSSIBILITY OF SUCH DAMAGE. */ | |
| #include "config.h" | |
| #include <errno.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <sys/types.h> | |
| #include "dwarf2.h" | |
| #include "filenames.h" | |
| #include "backtrace.h" | |
| #include "internal.h" | |
| #if !defined(HAVE_DECL_STRNLEN) || !HAVE_DECL_STRNLEN | |
| /* If strnlen is not declared, provide our own version. */ | |
| static size_t | |
| xstrnlen (const char *s, size_t maxlen) | |
| { | |
| size_t i; | |
| for (i = 0; i < maxlen; ++i) | |
| if (s[i] == '\0') | |
| break; | |
| return i; | |
| } | |
| #define strnlen xstrnlen | |
| #endif | |
| /* A buffer to read DWARF info. */ | |
| struct dwarf_buf | |
| { | |
| /* Buffer name for error messages. */ | |
| const char *name; | |
| /* Start of the buffer. */ | |
| const unsigned char *start; | |
| /* Next byte to read. */ | |
| const unsigned char *buf; | |
| /* The number of bytes remaining. */ | |
| size_t left; | |
| /* Whether the data is big-endian. */ | |
| int is_bigendian; | |
| /* Error callback routine. */ | |
| backtrace_error_callback error_callback; | |
| /* Data for error_callback. */ | |
| void *data; | |
| /* Non-zero if we've reported an underflow error. */ | |
| int reported_underflow; | |
| }; | |
| /* A single attribute in a DWARF abbreviation. */ | |
| struct attr | |
| { | |
| /* The attribute name. */ | |
| enum dwarf_attribute name; | |
| /* The attribute form. */ | |
| enum dwarf_form form; | |
| /* The attribute value, for DW_FORM_implicit_const. */ | |
| int64_t val; | |
| }; | |
| /* A single DWARF abbreviation. */ | |
| struct abbrev | |
| { | |
| /* The abbrev code--the number used to refer to the abbrev. */ | |
| uint64_t code; | |
| /* The entry tag. */ | |
| enum dwarf_tag tag; | |
| /* Non-zero if this abbrev has child entries. */ | |
| int has_children; | |
| /* The number of attributes. */ | |
| size_t num_attrs; | |
| /* The attributes. */ | |
| struct attr *attrs; | |
| }; | |
| /* The DWARF abbreviations for a compilation unit. This structure | |
| only exists while reading the compilation unit. Most DWARF readers | |
| seem to a hash table to map abbrev ID's to abbrev entries. | |
| However, we primarily care about GCC, and GCC simply issues ID's in | |
| numerical order starting at 1. So we simply keep a sorted vector, | |
| and try to just look up the code. */ | |
| struct abbrevs | |
| { | |
| /* The number of abbrevs in the vector. */ | |
| size_t num_abbrevs; | |
| /* The abbrevs, sorted by the code field. */ | |
| struct abbrev *abbrevs; | |
| }; | |
| /* The different kinds of attribute values. */ | |
| enum attr_val_encoding | |
| { | |
| /* No attribute value. */ | |
| ATTR_VAL_NONE, | |
| /* An address. */ | |
| ATTR_VAL_ADDRESS, | |
| /* An index into the .debug_addr section, whose value is relative to | |
| the DW_AT_addr_base attribute of the compilation unit. */ | |
| ATTR_VAL_ADDRESS_INDEX, | |
| /* A unsigned integer. */ | |
| ATTR_VAL_UINT, | |
| /* A sigd integer. */ | |
| ATTR_VAL_SINT, | |
| /* A string. */ | |
| ATTR_VAL_STRING, | |
| /* An index into the .debug_str_offsets section. */ | |
| ATTR_VAL_STRING_INDEX, | |
| /* An offset to other data in the containing unit. */ | |
| ATTR_VAL_REF_UNIT, | |
| /* An offset to other data within the .debug_info section. */ | |
| ATTR_VAL_REF_INFO, | |
| /* An offset to other data within the alt .debug_info section. */ | |
| ATTR_VAL_REF_ALT_INFO, | |
| /* An offset to data in some other section. */ | |
| ATTR_VAL_REF_SECTION, | |
| /* A type signature. */ | |
| ATTR_VAL_REF_TYPE, | |
| /* An index into the .debug_rnglists section. */ | |
| ATTR_VAL_RNGLISTS_INDEX, | |
| /* A block of data (not represented). */ | |
| ATTR_VAL_BLOCK, | |
| /* An expression (not represented). */ | |
| ATTR_VAL_EXPR, | |
| }; | |
| /* An attribute value. */ | |
| struct attr_val | |
| { | |
| /* How the value is stored in the field u. */ | |
| enum attr_val_encoding encoding; | |
| union | |
| { | |
| /* ATTR_VAL_ADDRESS*, ATTR_VAL_UINT, ATTR_VAL_REF*. */ | |
| uint64_t uint; | |
| /* ATTR_VAL_SINT. */ | |
| int64_t sint; | |
| /* ATTR_VAL_STRING. */ | |
| const char *string; | |
| /* ATTR_VAL_BLOCK not stored. */ | |
| } u; | |
| }; | |
| /* The line number program header. */ | |
| struct line_header | |
| { | |
| /* The version of the line number information. */ | |
| int version; | |
| /* Address size. */ | |
| int addrsize; | |
| /* The minimum instruction length. */ | |
| unsigned int min_insn_len; | |
| /* The maximum number of ops per instruction. */ | |
| unsigned int max_ops_per_insn; | |
| /* The line base for special opcodes. */ | |
| int line_base; | |
| /* The line range for special opcodes. */ | |
| unsigned int line_range; | |
| /* The opcode base--the first special opcode. */ | |
| unsigned int opcode_base; | |
| /* Opcode lengths, indexed by opcode - 1. */ | |
| const unsigned char *opcode_lengths; | |
| /* The number of directory entries. */ | |
| size_t dirs_count; | |
| /* The directory entries. */ | |
| const char **dirs; | |
| /* The number of filenames. */ | |
| size_t filenames_count; | |
| /* The filenames. */ | |
| const char **filenames; | |
| }; | |
| /* A format description from a line header. */ | |
| struct line_header_format | |
| { | |
| int lnct; /* LNCT code. */ | |
| enum dwarf_form form; /* Form of entry data. */ | |
| }; | |
| /* Map a single PC value to a file/line. We will keep a vector of | |
| these sorted by PC value. Each file/line will be correct from the | |
| PC up to the PC of the next entry if there is one. We allocate one | |
| extra entry at the end so that we can use bsearch. */ | |
| struct line | |
| { | |
| /* PC. */ | |
| uintptr_t pc; | |
| /* File name. Many entries in the array are expected to point to | |
| the same file name. */ | |
| const char *filename; | |
| /* Line number. */ | |
| int lineno; | |
| /* Discriminator. */ | |
| int disc; | |
| /* Index of the object in the original array read from the DWARF | |
| section, before it has been sorted. The index makes it possible | |
| to use Quicksort and maintain stability. */ | |
| int idx; | |
| }; | |
| /* A growable vector of line number information. This is used while | |
| reading the line numbers. */ | |
| struct line_vector | |
| { | |
| /* Memory. This is an array of struct line. */ | |
| struct backtrace_vector vec; | |
| /* Number of valid mappings. */ | |
| size_t count; | |
| }; | |
| /* A function described in the debug info. */ | |
| struct function | |
| { | |
| /* The name of the function. */ | |
| const char *name; | |
| /* If this is an inlined function, the filename of the call | |
| site. */ | |
| const char *caller_filename; | |
| /* If this is an inlined function, the line number of the call | |
| site. */ | |
| int caller_lineno; | |
| /* If this is an inlined function, the discriminator of the call | |
| site. */ | |
| unsigned int caller_disc; | |
| /* The line number of the declaration. */ | |
| int decl_lineno; | |
| /* Map PC ranges to inlined functions. */ | |
| struct function_addrs *function_addrs; | |
| size_t function_addrs_count; | |
| }; | |
| /* An address range for a function. This maps a PC value to a | |
| specific function. */ | |
| struct function_addrs | |
| { | |
| /* Range is LOW <= PC < HIGH. */ | |
| uintptr_t low; | |
| uintptr_t high; | |
| /* Function for this address range. */ | |
| struct function *function; | |
| }; | |
| /* A growable vector of function address ranges. */ | |
| struct function_vector | |
| { | |
| /* Memory. This is an array of struct function_addrs. */ | |
| struct backtrace_vector vec; | |
| /* Number of address ranges present. */ | |
| size_t count; | |
| }; | |
| /* A DWARF compilation unit. This only holds the information we need | |
| to map a PC to a file and line. */ | |
| struct unit | |
| { | |
| /* The first entry for this compilation unit. */ | |
| const unsigned char *unit_data; | |
| /* The length of the data for this compilation unit. */ | |
| size_t unit_data_len; | |
| /* The offset of UNIT_DATA from the start of the information for | |
| this compilation unit. */ | |
| size_t unit_data_offset; | |
| /* Offset of the start of the compilation unit from the start of the | |
| .debug_info section. */ | |
| size_t low_offset; | |
| /* Offset of the end of the compilation unit from the start of the | |
| .debug_info section. */ | |
| size_t high_offset; | |
| /* DWARF version. */ | |
| int version; | |
| /* Whether unit is DWARF64. */ | |
| int is_dwarf64; | |
| /* Address size. */ | |
| int addrsize; | |
| /* Offset into line number information. */ | |
| off_t lineoff; | |
| /* Offset of compilation unit in .debug_str_offsets. */ | |
| uint64_t str_offsets_base; | |
| /* Offset of compilation unit in .debug_addr. */ | |
| uint64_t addr_base; | |
| /* Offset of compilation unit in .debug_rnglists. */ | |
| uint64_t rnglists_base; | |
| /* Primary source file. */ | |
| const char *filename; | |
| /* Compilation command working directory. */ | |
| const char *comp_dir; | |
| /* Absolute file name, only set if needed. */ | |
| const char *abs_filename; | |
| /* The abbreviations for this unit. */ | |
| struct abbrevs abbrevs; | |
| /* The fields above this point are read in during initialization and | |
| may be accessed freely. The fields below this point are read in | |
| as needed, and therefore require care, as different threads may | |
| try to initialize them simultaneously. */ | |
| /* PC to line number mapping. This is NULL if the values have not | |
| been read. This is (struct line *) -1 if there was an error | |
| reading the values. */ | |
| struct line *lines; | |
| /* Number of entries in lines. */ | |
| size_t lines_count; | |
| /* PC ranges to function. */ | |
| struct function_addrs *function_addrs; | |
| size_t function_addrs_count; | |
| }; | |
| /* An address range for a compilation unit. This maps a PC value to a | |
| specific compilation unit. Note that we invert the representation | |
| in DWARF: instead of listing the units and attaching a list of | |
| ranges, we list the ranges and have each one point to the unit. | |
| This lets us do a binary search to find the unit. */ | |
| struct unit_addrs | |
| { | |
| /* Range is LOW <= PC < HIGH. */ | |
| uintptr_t low; | |
| uintptr_t high; | |
| /* Compilation unit for this address range. */ | |
| struct unit *u; | |
| }; | |
| /* A growable vector of compilation unit address ranges. */ | |
| struct unit_addrs_vector | |
| { | |
| /* Memory. This is an array of struct unit_addrs. */ | |
| struct backtrace_vector vec; | |
| /* Number of address ranges present. */ | |
| size_t count; | |
| }; | |
| /* A growable vector of compilation unit pointer. */ | |
| struct unit_vector | |
| { | |
| struct backtrace_vector vec; | |
| size_t count; | |
| }; | |
| /* The information we need to map a PC to a file and line. */ | |
| struct dwarf_data | |
| { | |
| /* The data for the next file we know about. */ | |
| struct dwarf_data *next; | |
| /* The data for .gnu_debugaltlink. */ | |
| struct dwarf_data *altlink; | |
| /* The base address mapping for this file. */ | |
| struct libbacktrace_base_address base_address; | |
| /* A sorted list of address ranges. */ | |
| struct unit_addrs *addrs; | |
| /* Number of address ranges in list. */ | |
| size_t addrs_count; | |
| /* A sorted list of units. */ | |
| struct unit **units; | |
| /* Number of units in the list. */ | |
| size_t units_count; | |
| /* The unparsed DWARF debug data. */ | |
| struct dwarf_sections dwarf_sections; | |
| /* Whether the data is big-endian or not. */ | |
| int is_bigendian; | |
| /* A vector used for function addresses. We keep this here so that | |
| we can grow the vector as we read more functions. */ | |
| struct function_vector fvec; | |
| }; | |
| /* Report an error for a DWARF buffer. */ | |
| static void | |
| dwarf_buf_error (struct dwarf_buf *buf, const char *msg, int errnum) | |
| { | |
| char b[200]; | |
| snprintf (b, sizeof b, "%s in %s at %d", | |
| msg, buf->name, (int) (buf->buf - buf->start)); | |
| buf->error_callback (buf->data, b, errnum); | |
| } | |
| /* Require at least COUNT bytes in BUF. Return 1 if all is well, 0 on | |
| error. */ | |
| static int | |
| require (struct dwarf_buf *buf, size_t count) | |
| { | |
| if (buf->left >= count) | |
| return 1; | |
| if (!buf->reported_underflow) | |
| { | |
| dwarf_buf_error (buf, "DWARF underflow", 0); | |
| buf->reported_underflow = 1; | |
| } | |
| return 0; | |
| } | |
| /* Advance COUNT bytes in BUF. Return 1 if all is well, 0 on | |
| error. */ | |
| static int | |
| advance (struct dwarf_buf *buf, size_t count) | |
| { | |
| if (!require (buf, count)) | |
| return 0; | |
| buf->buf += count; | |
| buf->left -= count; | |
| return 1; | |
| } | |
| /* Read one zero-terminated string from BUF and advance past the string. */ | |
| static const char * | |
| read_string (struct dwarf_buf *buf) | |
| { | |
| const char *p = (const char *)buf->buf; | |
| size_t len = strnlen (p, buf->left); | |
| /* - If len == left, we ran out of buffer before finding the zero terminator. | |
| Generate an error by advancing len + 1. | |
| - If len < left, advance by len + 1 to skip past the zero terminator. */ | |
| size_t count = len + 1; | |
| if (!advance (buf, count)) | |
| return NULL; | |
| return p; | |
| } | |
| /* Read one byte from BUF and advance 1 byte. */ | |
| static unsigned char | |
| read_byte (struct dwarf_buf *buf) | |
| { | |
| const unsigned char *p = buf->buf; | |
| if (!advance (buf, 1)) | |
| return 0; | |
| return p[0]; | |
| } | |
| /* Read a signed char from BUF and advance 1 byte. */ | |
| static signed char | |
| read_sbyte (struct dwarf_buf *buf) | |
| { | |
| const unsigned char *p = buf->buf; | |
| if (!advance (buf, 1)) | |
| return 0; | |
| return (*p ^ 0x80) - 0x80; | |
| } | |
| /* Read a uint16 from BUF and advance 2 bytes. */ | |
| static uint16_t | |
| read_uint16 (struct dwarf_buf *buf) | |
| { | |
| const unsigned char *p = buf->buf; | |
| if (!advance (buf, 2)) | |
| return 0; | |
| if (buf->is_bigendian) | |
| return ((uint16_t) p[0] << 8) | (uint16_t) p[1]; | |
| else | |
| return ((uint16_t) p[1] << 8) | (uint16_t) p[0]; | |
| } | |
| /* Read a 24 bit value from BUF and advance 3 bytes. */ | |
| static uint32_t | |
| read_uint24 (struct dwarf_buf *buf) | |
| { | |
| const unsigned char *p = buf->buf; | |
| if (!advance (buf, 3)) | |
| return 0; | |
| if (buf->is_bigendian) | |
| return (((uint32_t) p[0] << 16) | ((uint32_t) p[1] << 8) | |
| | (uint32_t) p[2]); | |
| else | |
| return (((uint32_t) p[2] << 16) | ((uint32_t) p[1] << 8) | |
| | (uint32_t) p[0]); | |
| } | |
| /* Read a uint32 from BUF and advance 4 bytes. */ | |
| static uint32_t | |
| read_uint32 (struct dwarf_buf *buf) | |
| { | |
| const unsigned char *p = buf->buf; | |
| if (!advance (buf, 4)) | |
| return 0; | |
| if (buf->is_bigendian) | |
| return (((uint32_t) p[0] << 24) | ((uint32_t) p[1] << 16) | |
| | ((uint32_t) p[2] << 8) | (uint32_t) p[3]); | |
| else | |
| return (((uint32_t) p[3] << 24) | ((uint32_t) p[2] << 16) | |
| | ((uint32_t) p[1] << 8) | (uint32_t) p[0]); | |
| } | |
| /* Read a uint64 from BUF and advance 8 bytes. */ | |
| static uint64_t | |
| read_uint64 (struct dwarf_buf *buf) | |
| { | |
| const unsigned char *p = buf->buf; | |
| if (!advance (buf, 8)) | |
| return 0; | |
| if (buf->is_bigendian) | |
| return (((uint64_t) p[0] << 56) | ((uint64_t) p[1] << 48) | |
| | ((uint64_t) p[2] << 40) | ((uint64_t) p[3] << 32) | |
| | ((uint64_t) p[4] << 24) | ((uint64_t) p[5] << 16) | |
| | ((uint64_t) p[6] << 8) | (uint64_t) p[7]); | |
| else | |
| return (((uint64_t) p[7] << 56) | ((uint64_t) p[6] << 48) | |
| | ((uint64_t) p[5] << 40) | ((uint64_t) p[4] << 32) | |
| | ((uint64_t) p[3] << 24) | ((uint64_t) p[2] << 16) | |
| | ((uint64_t) p[1] << 8) | (uint64_t) p[0]); | |
| } | |
| /* Read an offset from BUF and advance the appropriate number of | |
| bytes. */ | |
| static uint64_t | |
| read_offset (struct dwarf_buf *buf, int is_dwarf64) | |
| { | |
| if (is_dwarf64) | |
| return read_uint64 (buf); | |
| else | |
| return read_uint32 (buf); | |
| } | |
| /* Read an address from BUF and advance the appropriate number of | |
| bytes. */ | |
| static uint64_t | |
| read_address (struct dwarf_buf *buf, int addrsize) | |
| { | |
| switch (addrsize) | |
| { | |
| case 1: | |
| return read_byte (buf); | |
| case 2: | |
| return read_uint16 (buf); | |
| case 4: | |
| return read_uint32 (buf); | |
| case 8: | |
| return read_uint64 (buf); | |
| default: | |
| dwarf_buf_error (buf, "unrecognized address size", 0); | |
| return 0; | |
| } | |
| } | |
| /* Return whether a value is the highest possible address, given the | |
| address size. */ | |
| static int | |
| is_highest_address (uint64_t address, int addrsize) | |
| { | |
| switch (addrsize) | |
| { | |
| case 1: | |
| return address == (unsigned char) -1; | |
| case 2: | |
| return address == (uint16_t) -1; | |
| case 4: | |
| return address == (uint32_t) -1; | |
| case 8: | |
| return address == (uint64_t) -1; | |
| default: | |
| return 0; | |
| } | |
| } | |
| /* Read an unsigned LEB128 number. */ | |
| static uint64_t | |
| read_uleb128 (struct dwarf_buf *buf) | |
| { | |
| uint64_t ret; | |
| unsigned int shift; | |
| int overflow; | |
| unsigned char b; | |
| ret = 0; | |
| shift = 0; | |
| overflow = 0; | |
| do | |
| { | |
| const unsigned char *p; | |
| p = buf->buf; | |
| if (!advance (buf, 1)) | |
| return 0; | |
| b = *p; | |
| if (shift < 64) | |
| ret |= ((uint64_t) (b & 0x7f)) << shift; | |
| else if (!overflow) | |
| { | |
| dwarf_buf_error (buf, "LEB128 overflows uint64_t", 0); | |
| overflow = 1; | |
| } | |
| shift += 7; | |
| } | |
| while ((b & 0x80) != 0); | |
| return ret; | |
| } | |
| /* Read a signed LEB128 number. */ | |
| static int64_t | |
| read_sleb128 (struct dwarf_buf *buf) | |
| { | |
| uint64_t val; | |
| unsigned int shift; | |
| int overflow; | |
| unsigned char b; | |
| val = 0; | |
| shift = 0; | |
| overflow = 0; | |
| do | |
| { | |
| const unsigned char *p; | |
| p = buf->buf; | |
| if (!advance (buf, 1)) | |
| return 0; | |
| b = *p; | |
| if (shift < 64) | |
| val |= ((uint64_t) (b & 0x7f)) << shift; | |
| else if (!overflow) | |
| { | |
| dwarf_buf_error (buf, "signed LEB128 overflows uint64_t", 0); | |
| overflow = 1; | |
| } | |
| shift += 7; | |
| } | |
| while ((b & 0x80) != 0); | |
| if ((b & 0x40) != 0 && shift < 64) | |
| val |= ((uint64_t) -1) << shift; | |
| return (int64_t) val; | |
| } | |
| /* Return the length of an LEB128 number. */ | |
| static size_t | |
| leb128_len (const unsigned char *p) | |
| { | |
| size_t ret; | |
| ret = 1; | |
| while ((*p & 0x80) != 0) | |
| { | |
| ++p; | |
| ++ret; | |
| } | |
| return ret; | |
| } | |
| /* Read initial_length from BUF and advance the appropriate number of bytes. */ | |
| static uint64_t | |
| read_initial_length (struct dwarf_buf *buf, int *is_dwarf64) | |
| { | |
| uint64_t len; | |
| len = read_uint32 (buf); | |
| if (len == 0xffffffff) | |
| { | |
| len = read_uint64 (buf); | |
| *is_dwarf64 = 1; | |
| } | |
| else | |
| *is_dwarf64 = 0; | |
| return len; | |
| } | |
| /* Call the callback function, which differs based on the moredata state | |
| flag. */ | |
| static int | |
| call_callback (struct backtrace_state *state, backtrace_full_callback callback, | |
| void *data, uintptr_t pc, const char *filename, int lineno, | |
| const char *function, unsigned int disc, int decl_lineno) | |
| { | |
| if (!state->moredata) | |
| return callback (data, pc, filename, lineno, function); | |
| else | |
| { | |
| struct backtrace_moredata md; | |
| memset (&md, 0, sizeof md); | |
| md.backtrace_version = BACKTRACE_MOREDATA_VERSION; | |
| md.backtrace_data = data; | |
| md.backtrace_discriminator = disc; | |
| md.backtrace_decl_lineno = decl_lineno; | |
| return callback ((void *) &md, pc, filename, lineno, function); | |
| } | |
| } | |
| /* Free an abbreviations structure. */ | |
| static void | |
| free_abbrevs (struct backtrace_state *state, struct abbrevs *abbrevs, | |
| backtrace_error_callback error_callback, void *data) | |
| { | |
| size_t i; | |
| for (i = 0; i < abbrevs->num_abbrevs; ++i) | |
| backtrace_free (state, abbrevs->abbrevs[i].attrs, | |
| abbrevs->abbrevs[i].num_attrs * sizeof (struct attr), | |
| error_callback, data); | |
| backtrace_free (state, abbrevs->abbrevs, | |
| abbrevs->num_abbrevs * sizeof (struct abbrev), | |
| error_callback, data); | |
| abbrevs->num_abbrevs = 0; | |
| abbrevs->abbrevs = NULL; | |
| } | |
| /* Read an attribute value. Returns 1 on success, 0 on failure. If | |
| the value can be represented as a uint64_t, sets *VAL and sets | |
| *IS_VALID to 1. We don't try to store the value of other attribute | |
| forms, because we don't care about them. */ | |
| static int | |
| read_attribute (enum dwarf_form form, uint64_t implicit_val, | |
| struct dwarf_buf *buf, int is_dwarf64, int version, | |
| int addrsize, const struct dwarf_sections *dwarf_sections, | |
| struct dwarf_data *altlink, struct attr_val *val) | |
| { | |
| /* Avoid warnings about val.u.FIELD may be used uninitialized if | |
| this function is inlined. The warnings aren't valid but can | |
| occur because the different fields are set and used | |
| conditionally. */ | |
| memset (val, 0, sizeof *val); | |
| switch (form) | |
| { | |
| case DW_FORM_addr: | |
| val->encoding = ATTR_VAL_ADDRESS; | |
| val->u.uint = read_address (buf, addrsize); | |
| return 1; | |
| case DW_FORM_block2: | |
| val->encoding = ATTR_VAL_BLOCK; | |
| return advance (buf, read_uint16 (buf)); | |
| case DW_FORM_block4: | |
| val->encoding = ATTR_VAL_BLOCK; | |
| return advance (buf, read_uint32 (buf)); | |
| case DW_FORM_data2: | |
| val->encoding = ATTR_VAL_UINT; | |
| val->u.uint = read_uint16 (buf); | |
| return 1; | |
| case DW_FORM_data4: | |
| val->encoding = ATTR_VAL_UINT; | |
| val->u.uint = read_uint32 (buf); | |
| return 1; | |
| case DW_FORM_data8: | |
| val->encoding = ATTR_VAL_UINT; | |
| val->u.uint = read_uint64 (buf); | |
| return 1; | |
| case DW_FORM_data16: | |
| val->encoding = ATTR_VAL_BLOCK; | |
| return advance (buf, 16); | |
| case DW_FORM_string: | |
| val->encoding = ATTR_VAL_STRING; | |
| val->u.string = read_string (buf); | |
| return val->u.string == NULL ? 0 : 1; | |
| case DW_FORM_block: | |
| val->encoding = ATTR_VAL_BLOCK; | |
| return advance (buf, read_uleb128 (buf)); | |
| case DW_FORM_block1: | |
| val->encoding = ATTR_VAL_BLOCK; | |
| return advance (buf, read_byte (buf)); | |
| case DW_FORM_data1: | |
| val->encoding = ATTR_VAL_UINT; | |
| val->u.uint = read_byte (buf); | |
| return 1; | |
| case DW_FORM_flag: | |
| val->encoding = ATTR_VAL_UINT; | |
| val->u.uint = read_byte (buf); | |
| return 1; | |
| case DW_FORM_sdata: | |
| val->encoding = ATTR_VAL_SINT; | |
| val->u.sint = read_sleb128 (buf); | |
| return 1; | |
| case DW_FORM_strp: | |
| { | |
| uint64_t offset; | |
| offset = read_offset (buf, is_dwarf64); | |
| if (offset >= dwarf_sections->size[DEBUG_STR]) | |
| { | |
| dwarf_buf_error (buf, "DW_FORM_strp out of range", 0); | |
| return 0; | |
| } | |
| val->encoding = ATTR_VAL_STRING; | |
| val->u.string = | |
| (const char *) dwarf_sections->data[DEBUG_STR] + offset; | |
| return 1; | |
| } | |
| case DW_FORM_line_strp: | |
| { | |
| uint64_t offset; | |
| offset = read_offset (buf, is_dwarf64); | |
| if (offset >= dwarf_sections->size[DEBUG_LINE_STR]) | |
| { | |
| dwarf_buf_error (buf, "DW_FORM_line_strp out of range", 0); | |
| return 0; | |
| } | |
| val->encoding = ATTR_VAL_STRING; | |
| val->u.string = | |
| (const char *) dwarf_sections->data[DEBUG_LINE_STR] + offset; | |
| return 1; | |
| } | |
| case DW_FORM_udata: | |
| val->encoding = ATTR_VAL_UINT; | |
| val->u.uint = read_uleb128 (buf); | |
| return 1; | |
| case DW_FORM_ref_addr: | |
| val->encoding = ATTR_VAL_REF_INFO; | |
| if (version == 2) | |
| val->u.uint = read_address (buf, addrsize); | |
| else | |
| val->u.uint = read_offset (buf, is_dwarf64); | |
| return 1; | |
| case DW_FORM_ref1: | |
| val->encoding = ATTR_VAL_REF_UNIT; | |
| val->u.uint = read_byte (buf); | |
| return 1; | |
| case DW_FORM_ref2: | |
| val->encoding = ATTR_VAL_REF_UNIT; | |
| val->u.uint = read_uint16 (buf); | |
| return 1; | |
| case DW_FORM_ref4: | |
| val->encoding = ATTR_VAL_REF_UNIT; | |
| val->u.uint = read_uint32 (buf); | |
| return 1; | |
| case DW_FORM_ref8: | |
| val->encoding = ATTR_VAL_REF_UNIT; | |
| val->u.uint = read_uint64 (buf); | |
| return 1; | |
| case DW_FORM_ref_udata: | |
| val->encoding = ATTR_VAL_REF_UNIT; | |
| val->u.uint = read_uleb128 (buf); | |
| return 1; | |
| case DW_FORM_indirect: | |
| { | |
| uint64_t form; | |
| form = read_uleb128 (buf); | |
| if (form == DW_FORM_implicit_const) | |
| { | |
| dwarf_buf_error (buf, | |
| "DW_FORM_indirect to DW_FORM_implicit_const", | |
| 0); | |
| return 0; | |
| } | |
| return read_attribute ((enum dwarf_form) form, 0, buf, is_dwarf64, | |
| version, addrsize, dwarf_sections, altlink, | |
| val); | |
| } | |
| case DW_FORM_sec_offset: | |
| val->encoding = ATTR_VAL_REF_SECTION; | |
| val->u.uint = read_offset (buf, is_dwarf64); | |
| return 1; | |
| case DW_FORM_exprloc: | |
| val->encoding = ATTR_VAL_EXPR; | |
| return advance (buf, read_uleb128 (buf)); | |
| case DW_FORM_flag_present: | |
| val->encoding = ATTR_VAL_UINT; | |
| val->u.uint = 1; | |
| return 1; | |
| case DW_FORM_ref_sig8: | |
| val->encoding = ATTR_VAL_REF_TYPE; | |
| val->u.uint = read_uint64 (buf); | |
| return 1; | |
| case DW_FORM_strx: case DW_FORM_strx1: case DW_FORM_strx2: | |
| case DW_FORM_strx3: case DW_FORM_strx4: | |
| { | |
| uint64_t offset; | |
| switch (form) | |
| { | |
| case DW_FORM_strx: | |
| offset = read_uleb128 (buf); | |
| break; | |
| case DW_FORM_strx1: | |
| offset = read_byte (buf); | |
| break; | |
| case DW_FORM_strx2: | |
| offset = read_uint16 (buf); | |
| break; | |
| case DW_FORM_strx3: | |
| offset = read_uint24 (buf); | |
| break; | |
| case DW_FORM_strx4: | |
| offset = read_uint32 (buf); | |
| break; | |
| default: | |
| /* This case can't happen. */ | |
| return 0; | |
| } | |
| val->encoding = ATTR_VAL_STRING_INDEX; | |
| val->u.uint = offset; | |
| return 1; | |
| } | |
| case DW_FORM_addrx: case DW_FORM_addrx1: case DW_FORM_addrx2: | |
| case DW_FORM_addrx3: case DW_FORM_addrx4: | |
| { | |
| uint64_t offset; | |
| switch (form) | |
| { | |
| case DW_FORM_addrx: | |
| offset = read_uleb128 (buf); | |
| break; | |
| case DW_FORM_addrx1: | |
| offset = read_byte (buf); | |
| break; | |
| case DW_FORM_addrx2: | |
| offset = read_uint16 (buf); | |
| break; | |
| case DW_FORM_addrx3: | |
| offset = read_uint24 (buf); | |
| break; | |
| case DW_FORM_addrx4: | |
| offset = read_uint32 (buf); | |
| break; | |
| default: | |
| /* This case can't happen. */ | |
| return 0; | |
| } | |
| val->encoding = ATTR_VAL_ADDRESS_INDEX; | |
| val->u.uint = offset; | |
| return 1; | |
| } | |
| case DW_FORM_ref_sup4: | |
| val->encoding = ATTR_VAL_REF_SECTION; | |
| val->u.uint = read_uint32 (buf); | |
| return 1; | |
| case DW_FORM_ref_sup8: | |
| val->encoding = ATTR_VAL_REF_SECTION; | |
| val->u.uint = read_uint64 (buf); | |
| return 1; | |
| case DW_FORM_implicit_const: | |
| val->encoding = ATTR_VAL_UINT; | |
| val->u.uint = implicit_val; | |
| return 1; | |
| case DW_FORM_loclistx: | |
| /* We don't distinguish this from DW_FORM_sec_offset. It | |
| * shouldn't matter since we don't care about loclists. */ | |
| val->encoding = ATTR_VAL_REF_SECTION; | |
| val->u.uint = read_uleb128 (buf); | |
| return 1; | |
| case DW_FORM_rnglistx: | |
| val->encoding = ATTR_VAL_RNGLISTS_INDEX; | |
| val->u.uint = read_uleb128 (buf); | |
| return 1; | |
| case DW_FORM_GNU_addr_index: | |
| val->encoding = ATTR_VAL_REF_SECTION; | |
| val->u.uint = read_uleb128 (buf); | |
| return 1; | |
| case DW_FORM_GNU_str_index: | |
| val->encoding = ATTR_VAL_REF_SECTION; | |
| val->u.uint = read_uleb128 (buf); | |
| return 1; | |
| case DW_FORM_GNU_ref_alt: | |
| val->u.uint = read_offset (buf, is_dwarf64); | |
| if (altlink == NULL) | |
| { | |
| val->encoding = ATTR_VAL_NONE; | |
| return 1; | |
| } | |
| val->encoding = ATTR_VAL_REF_ALT_INFO; | |
| return 1; | |
| case DW_FORM_strp_sup: case DW_FORM_GNU_strp_alt: | |
| { | |
| uint64_t offset; | |
| offset = read_offset (buf, is_dwarf64); | |
| if (altlink == NULL) | |
| { | |
| val->encoding = ATTR_VAL_NONE; | |
| return 1; | |
| } | |
| if (offset >= altlink->dwarf_sections.size[DEBUG_STR]) | |
| { | |
| dwarf_buf_error (buf, "DW_FORM_strp_sup out of range", 0); | |
| return 0; | |
| } | |
| val->encoding = ATTR_VAL_STRING; | |
| val->u.string = | |
| (const char *) altlink->dwarf_sections.data[DEBUG_STR] + offset; | |
| return 1; | |
| } | |
| default: | |
| dwarf_buf_error (buf, "unrecognized DWARF form", -1); | |
| return 0; | |
| } | |
| } | |
| /* If we can determine the value of a string attribute, set *STRING to | |
| point to the string. Return 1 on success, 0 on error. If we don't | |
| know the value, we consider that a success, and we don't change | |
| *STRING. An error is only reported for some sort of out of range | |
| offset. */ | |
| static int | |
| resolve_string (const struct dwarf_sections *dwarf_sections, int is_dwarf64, | |
| int is_bigendian, uint64_t str_offsets_base, | |
| const struct attr_val *val, | |
| backtrace_error_callback error_callback, void *data, | |
| const char **string) | |
| { | |
| switch (val->encoding) | |
| { | |
| case ATTR_VAL_STRING: | |
| *string = val->u.string; | |
| return 1; | |
| case ATTR_VAL_STRING_INDEX: | |
| { | |
| uint64_t offset; | |
| struct dwarf_buf offset_buf; | |
| offset = val->u.uint * (is_dwarf64 ? 8 : 4) + str_offsets_base; | |
| if (offset + (is_dwarf64 ? 8 : 4) | |
| > dwarf_sections->size[DEBUG_STR_OFFSETS]) | |
| { | |
| error_callback (data, "DW_FORM_strx value out of range", 0); | |
| return 0; | |
| } | |
| offset_buf.name = ".debug_str_offsets"; | |
| offset_buf.start = dwarf_sections->data[DEBUG_STR_OFFSETS]; | |
| offset_buf.buf = dwarf_sections->data[DEBUG_STR_OFFSETS] + offset; | |
| offset_buf.left = dwarf_sections->size[DEBUG_STR_OFFSETS] - offset; | |
| offset_buf.is_bigendian = is_bigendian; | |
| offset_buf.error_callback = error_callback; | |
| offset_buf.data = data; | |
| offset_buf.reported_underflow = 0; | |
| offset = read_offset (&offset_buf, is_dwarf64); | |
| if (offset >= dwarf_sections->size[DEBUG_STR]) | |
| { | |
| dwarf_buf_error (&offset_buf, | |
| "DW_FORM_strx offset out of range", | |
| 0); | |
| return 0; | |
| } | |
| *string = (const char *) dwarf_sections->data[DEBUG_STR] + offset; | |
| return 1; | |
| } | |
| default: | |
| return 1; | |
| } | |
| } | |
| /* Set *ADDRESS to the real address for a ATTR_VAL_ADDRESS_INDEX. | |
| Return 1 on success, 0 on error. */ | |
| static int | |
| resolve_addr_index (const struct dwarf_sections *dwarf_sections, | |
| uint64_t addr_base, int addrsize, int is_bigendian, | |
| uint64_t addr_index, | |
| backtrace_error_callback error_callback, void *data, | |
| uintptr_t *address) | |
| { | |
| uint64_t offset; | |
| struct dwarf_buf addr_buf; | |
| offset = addr_index * addrsize + addr_base; | |
| if (offset + addrsize > dwarf_sections->size[DEBUG_ADDR]) | |
| { | |
| error_callback (data, "DW_FORM_addrx value out of range", 0); | |
| return 0; | |
| } | |
| addr_buf.name = ".debug_addr"; | |
| addr_buf.start = dwarf_sections->data[DEBUG_ADDR]; | |
| addr_buf.buf = dwarf_sections->data[DEBUG_ADDR] + offset; | |
| addr_buf.left = dwarf_sections->size[DEBUG_ADDR] - offset; | |
| addr_buf.is_bigendian = is_bigendian; | |
| addr_buf.error_callback = error_callback; | |
| addr_buf.data = data; | |
| addr_buf.reported_underflow = 0; | |
| *address = (uintptr_t) read_address (&addr_buf, addrsize); | |
| return 1; | |
| } | |
| /* Compare a unit offset against a unit for bsearch. */ | |
| static int | |
| units_search (const void *vkey, const void *ventry) | |
| { | |
| const size_t *key = (const size_t *) vkey; | |
| const struct unit *entry = *((const struct unit *const *) ventry); | |
| size_t offset; | |
| offset = *key; | |
| if (offset < entry->low_offset) | |
| return -1; | |
| else if (offset >= entry->high_offset) | |
| return 1; | |
| else | |
| return 0; | |
| } | |
| /* Find a unit in PU containing OFFSET. */ | |
| static struct unit * | |
| find_unit (struct unit **pu, size_t units_count, size_t offset) | |
| { | |
| struct unit **u; | |
| u = bsearch (&offset, pu, units_count, sizeof (struct unit *), units_search); | |
| return u == NULL ? NULL : *u; | |
| } | |
| /* Compare function_addrs for qsort. When ranges are nested, make the | |
| smallest one sort last. */ | |
| static int | |
| function_addrs_compare (const void *v1, const void *v2) | |
| { | |
| const struct function_addrs *a1 = (const struct function_addrs *) v1; | |
| const struct function_addrs *a2 = (const struct function_addrs *) v2; | |
| if (a1->low < a2->low) | |
| return -1; | |
| if (a1->low > a2->low) | |
| return 1; | |
| if (a1->high < a2->high) | |
| return 1; | |
| if (a1->high > a2->high) | |
| return -1; | |
| return strcmp (a1->function->name, a2->function->name); | |
| } | |
| /* Compare a PC against a function_addrs for bsearch. We always | |
| allocate an entra entry at the end of the vector, so that this | |
| routine can safely look at the next entry. Note that if there are | |
| multiple ranges containing PC, which one will be returned is | |
| unpredictable. We compensate for that in dwarf_fileline. */ | |
| static int | |
| function_addrs_search (const void *vkey, const void *ventry) | |
| { | |
| const uintptr_t *key = (const uintptr_t *) vkey; | |
| const struct function_addrs *entry = (const struct function_addrs *) ventry; | |
| uintptr_t pc; | |
| pc = *key; | |
| if (pc < entry->low) | |
| return -1; | |
| else if (pc > (entry + 1)->low) | |
| return 1; | |
| else | |
| return 0; | |
| } | |
| /* Add a new compilation unit address range to a vector. This is | |
| called via add_ranges. Returns 1 on success, 0 on failure. */ | |
| static int | |
| add_unit_addr (struct backtrace_state *state, void *rdata, | |
| uintptr_t lowpc, uintptr_t highpc, | |
| backtrace_error_callback error_callback, void *data, | |
| void *pvec) | |
| { | |
| struct unit *u = (struct unit *) rdata; | |
| struct unit_addrs_vector *vec = (struct unit_addrs_vector *) pvec; | |
| struct unit_addrs *p; | |
| /* Try to merge with the last entry. */ | |
| if (vec->count > 0) | |
| { | |
| p = (struct unit_addrs *) vec->vec.base + (vec->count - 1); | |
| if ((lowpc == p->high || lowpc == p->high + 1) | |
| && u == p->u) | |
| { | |
| if (highpc > p->high) | |
| p->high = highpc; | |
| return 1; | |
| } | |
| } | |
| p = ((struct unit_addrs *) | |
| backtrace_vector_grow (state, sizeof (struct unit_addrs), | |
| error_callback, data, &vec->vec)); | |
| if (p == NULL) | |
| return 0; | |
| p->low = lowpc; | |
| p->high = highpc; | |
| p->u = u; | |
| ++vec->count; | |
| return 1; | |
| } | |
| /* Compare unit_addrs for qsort. When ranges are nested, make the | |
| smallest one sort last. */ | |
| static int | |
| unit_addrs_compare (const void *v1, const void *v2) | |
| { | |
| const struct unit_addrs *a1 = (const struct unit_addrs *) v1; | |
| const struct unit_addrs *a2 = (const struct unit_addrs *) v2; | |
| if (a1->low < a2->low) | |
| return -1; | |
| if (a1->low > a2->low) | |
| return 1; | |
| if (a1->high < a2->high) | |
| return 1; | |
| if (a1->high > a2->high) | |
| return -1; | |
| if (a1->u->lineoff < a2->u->lineoff) | |
| return -1; | |
| if (a1->u->lineoff > a2->u->lineoff) | |
| return 1; | |
| return 0; | |
| } | |
| /* Compare a PC against a unit_addrs for bsearch. We always allocate | |
| an entry entry at the end of the vector, so that this routine can | |
| safely look at the next entry. Note that if there are multiple | |
| ranges containing PC, which one will be returned is unpredictable. | |
| We compensate for that in dwarf_fileline. */ | |
| static int | |
| unit_addrs_search (const void *vkey, const void *ventry) | |
| { | |
| const uintptr_t *key = (const uintptr_t *) vkey; | |
| const struct unit_addrs *entry = (const struct unit_addrs *) ventry; | |
| uintptr_t pc; | |
| pc = *key; | |
| if (pc < entry->low) | |
| return -1; | |
| else if (pc > (entry + 1)->low) | |
| return 1; | |
| else | |
| return 0; | |
| } | |
| /* Fill in overlapping ranges as needed. This is a subroutine of | |
| resolve_unit_addrs_overlap. */ | |
| static int | |
| resolve_unit_addrs_overlap_walk (struct backtrace_state *state, | |
| size_t *pfrom, size_t *pto, | |
| struct unit_addrs *enclosing, | |
| struct unit_addrs_vector *old_vec, | |
| backtrace_error_callback error_callback, | |
| void *data, | |
| struct unit_addrs_vector *new_vec) | |
| { | |
| struct unit_addrs *old_addrs; | |
| size_t old_count; | |
| struct unit_addrs *new_addrs; | |
| size_t from; | |
| size_t to; | |
| old_addrs = (struct unit_addrs *) old_vec->vec.base; | |
| old_count = old_vec->count; | |
| new_addrs = (struct unit_addrs *) new_vec->vec.base; | |
| for (from = *pfrom, to = *pto; from < old_count; from++, to++) | |
| { | |
| /* If we are in the scope of a larger range that can no longer | |
| cover any further ranges, return back to the caller. */ | |
| if (enclosing != NULL | |
| && enclosing->high <= old_addrs[from].low) | |
| { | |
| *pfrom = from; | |
| *pto = to; | |
| return 1; | |
| } | |
| new_addrs[to] = old_addrs[from]; | |
| /* If we are in scope of a larger range, fill in any gaps | |
| between this entry and the next one. | |
| There is an extra entry at the end of the vector, so it's | |
| always OK to refer to from + 1. */ | |
| if (enclosing != NULL | |
| && enclosing->high > old_addrs[from].high | |
| && old_addrs[from].high < old_addrs[from + 1].low) | |
| { | |
| void *grew; | |
| size_t new_high; | |
| grew = backtrace_vector_grow (state, sizeof (struct unit_addrs), | |
| error_callback, data, &new_vec->vec); | |
| if (grew == NULL) | |
| return 0; | |
| new_addrs = (struct unit_addrs *) new_vec->vec.base; | |
| to++; | |
| new_addrs[to].low = old_addrs[from].high; | |
| new_high = old_addrs[from + 1].low; | |
| if (enclosing->high < new_high) | |
| new_high = enclosing->high; | |
| new_addrs[to].high = new_high; | |
| new_addrs[to].u = enclosing->u; | |
| } | |
| /* If this range has a larger scope than the next one, use it to | |
| fill in any gaps. */ | |
| if (old_addrs[from].high > old_addrs[from + 1].high) | |
| { | |
| *pfrom = from + 1; | |
| *pto = to + 1; | |
| if (!resolve_unit_addrs_overlap_walk (state, pfrom, pto, | |
| &old_addrs[from], old_vec, | |
| error_callback, data, new_vec)) | |
| return 0; | |
| from = *pfrom; | |
| to = *pto; | |
| /* Undo the increment the loop is about to do. */ | |
| from--; | |
| to--; | |
| } | |
| } | |
| if (enclosing == NULL) | |
| { | |
| struct unit_addrs *pa; | |
| /* Add trailing entry. */ | |
| pa = ((struct unit_addrs *) | |
| backtrace_vector_grow (state, sizeof (struct unit_addrs), | |
| error_callback, data, &new_vec->vec)); | |
| if (pa == NULL) | |
| return 0; | |
| pa->low = 0; | |
| --pa->low; | |
| pa->high = pa->low; | |
| pa->u = NULL; | |
| new_vec->count = to; | |
| } | |
| return 1; | |
| } | |
| /* It is possible for the unit_addrs list to contain overlaps, as in | |
| 10: low == 10, high == 20, unit 1 | |
| 11: low == 12, high == 15, unit 2 | |
| 12: low == 20, high == 30, unit 1 | |
| In such a case, for pc == 17, a search using units_addr_search will | |
| return entry 11. However, pc == 17 doesn't fit in that range. We | |
| actually want range 10. | |
| It seems that in general we might have an arbitrary number of | |
| ranges in between 10 and 12. | |
| To handle this we look for cases where range R1 is followed by | |
| range R2 such that R2 is a strict subset of R1. In such cases we | |
| insert a new range R3 following R2 that fills in the remainder of | |
| the address space covered by R1. That lets a relatively simple | |
| search find the correct range. | |
| These overlaps can occur because of the range merging we do in | |
| add_unit_addr. When the linker de-duplicates functions, it can | |
| leave behind an address range that refers to the address range of | |
| the retained duplicate. If the retained duplicate address range is | |
| merged with others, then after sorting we can see overlapping | |
| address ranges. | |
| See https://github.com/ianlancetaylor/libbacktrace/issues/137. */ | |
| static int | |
| resolve_unit_addrs_overlap (struct backtrace_state *state, | |
| backtrace_error_callback error_callback, | |
| void *data, struct unit_addrs_vector *addrs_vec) | |
| { | |
| struct unit_addrs *addrs; | |
| size_t count; | |
| int found; | |
| struct unit_addrs *entry; | |
| size_t i; | |
| struct unit_addrs_vector new_vec; | |
| void *grew; | |
| size_t from; | |
| size_t to; | |
| addrs = (struct unit_addrs *) addrs_vec->vec.base; | |
| count = addrs_vec->count; | |
| if (count == 0) | |
| return 1; | |
| /* Optimistically assume that overlaps are rare. */ | |
| found = 0; | |
| entry = addrs; | |
| for (i = 0; i < count - 1; i++) | |
| { | |
| if (entry->low < (entry + 1)->low | |
| && entry->high > (entry + 1)->high) | |
| { | |
| found = 1; | |
| break; | |
| } | |
| entry++; | |
| } | |
| if (!found) | |
| return 1; | |
| memset (&new_vec, 0, sizeof new_vec); | |
| grew = backtrace_vector_grow (state, | |
| count * sizeof (struct unit_addrs), | |
| error_callback, data, &new_vec.vec); | |
| if (grew == NULL) | |
| return 0; | |
| from = 0; | |
| to = 0; | |
| resolve_unit_addrs_overlap_walk (state, &from, &to, NULL, addrs_vec, | |
| error_callback, data, &new_vec); | |
| backtrace_vector_free (state, &addrs_vec->vec, error_callback, data); | |
| *addrs_vec = new_vec; | |
| return 1; | |
| } | |
| /* Sort the line vector by PC. We want a stable sort here to maintain | |
| the order of lines for the same PC values. Since the sequence is | |
| being sorted in place, their addresses cannot be relied on to | |
| maintain stability. That is the purpose of the index member. */ | |
| static int | |
| line_compare (const void *v1, const void *v2) | |
| { | |
| const struct line *ln1 = (const struct line *) v1; | |
| const struct line *ln2 = (const struct line *) v2; | |
| if (ln1->pc < ln2->pc) | |
| return -1; | |
| else if (ln1->pc > ln2->pc) | |
| return 1; | |
| else if (ln1->idx < ln2->idx) | |
| return -1; | |
| else if (ln1->idx > ln2->idx) | |
| return 1; | |
| else | |
| return 0; | |
| } | |
| /* Find a PC in a line vector. We always allocate an extra entry at | |
| the end of the lines vector, so that this routine can safely look | |
| at the next entry. Note that when there are multiple mappings for | |
| the same PC value, this will return the last one. */ | |
| static int | |
| line_search (const void *vkey, const void *ventry) | |
| { | |
| const uintptr_t *key = (const uintptr_t *) vkey; | |
| const struct line *entry = (const struct line *) ventry; | |
| uintptr_t pc; | |
| pc = *key; | |
| if (pc < entry->pc) | |
| return -1; | |
| else if (pc >= (entry + 1)->pc) | |
| return 1; | |
| else | |
| return 0; | |
| } | |
| /* Sort the abbrevs by the abbrev code. This function is passed to | |
| both qsort and bsearch. */ | |
| static int | |
| abbrev_compare (const void *v1, const void *v2) | |
| { | |
| const struct abbrev *a1 = (const struct abbrev *) v1; | |
| const struct abbrev *a2 = (const struct abbrev *) v2; | |
| if (a1->code < a2->code) | |
| return -1; | |
| else if (a1->code > a2->code) | |
| return 1; | |
| else | |
| { | |
| /* This really shouldn't happen. It means there are two | |
| different abbrevs with the same code, and that means we don't | |
| know which one lookup_abbrev should return. */ | |
| return 0; | |
| } | |
| } | |
| /* Read the abbreviation table for a compilation unit. Returns 1 on | |
| success, 0 on failure. */ | |
| static int | |
| read_abbrevs (struct backtrace_state *state, uint64_t abbrev_offset, | |
| const unsigned char *dwarf_abbrev, size_t dwarf_abbrev_size, | |
| int is_bigendian, backtrace_error_callback error_callback, | |
| void *data, struct abbrevs *abbrevs) | |
| { | |
| struct dwarf_buf abbrev_buf; | |
| struct dwarf_buf count_buf; | |
| size_t num_abbrevs; | |
| abbrevs->num_abbrevs = 0; | |
| abbrevs->abbrevs = NULL; | |
| if (abbrev_offset >= dwarf_abbrev_size) | |
| { | |
| error_callback (data, "abbrev offset out of range", 0); | |
| return 0; | |
| } | |
| abbrev_buf.name = ".debug_abbrev"; | |
| abbrev_buf.start = dwarf_abbrev; | |
| abbrev_buf.buf = dwarf_abbrev + abbrev_offset; | |
| abbrev_buf.left = dwarf_abbrev_size - abbrev_offset; | |
| abbrev_buf.is_bigendian = is_bigendian; | |
| abbrev_buf.error_callback = error_callback; | |
| abbrev_buf.data = data; | |
| abbrev_buf.reported_underflow = 0; | |
| /* Count the number of abbrevs in this list. */ | |
| count_buf = abbrev_buf; | |
| num_abbrevs = 0; | |
| while (read_uleb128 (&count_buf) != 0) | |
| { | |
| if (count_buf.reported_underflow) | |
| return 0; | |
| ++num_abbrevs; | |
| // Skip tag. | |
| read_uleb128 (&count_buf); | |
| // Skip has_children. | |
| read_byte (&count_buf); | |
| // Skip attributes. | |
| while (read_uleb128 (&count_buf) != 0) | |
| { | |
| uint64_t form; | |
| form = read_uleb128 (&count_buf); | |
| if ((enum dwarf_form) form == DW_FORM_implicit_const) | |
| read_sleb128 (&count_buf); | |
| } | |
| // Skip form of last attribute. | |
| read_uleb128 (&count_buf); | |
| } | |
| if (count_buf.reported_underflow) | |
| return 0; | |
| if (num_abbrevs == 0) | |
| return 1; | |
| abbrevs->abbrevs = ((struct abbrev *) | |
| backtrace_alloc (state, | |
| num_abbrevs * sizeof (struct abbrev), | |
| error_callback, data)); | |
| if (abbrevs->abbrevs == NULL) | |
| return 0; | |
| abbrevs->num_abbrevs = num_abbrevs; | |
| memset (abbrevs->abbrevs, 0, num_abbrevs * sizeof (struct abbrev)); | |
| num_abbrevs = 0; | |
| while (1) | |
| { | |
| uint64_t code; | |
| struct abbrev a; | |
| size_t num_attrs; | |
| struct attr *attrs; | |
| if (abbrev_buf.reported_underflow) | |
| goto fail; | |
| code = read_uleb128 (&abbrev_buf); | |
| if (code == 0) | |
| break; | |
| a.code = code; | |
| a.tag = (enum dwarf_tag) read_uleb128 (&abbrev_buf); | |
| a.has_children = read_byte (&abbrev_buf); | |
| count_buf = abbrev_buf; | |
| num_attrs = 0; | |
| while (read_uleb128 (&count_buf) != 0) | |
| { | |
| uint64_t form; | |
| ++num_attrs; | |
| form = read_uleb128 (&count_buf); | |
| if ((enum dwarf_form) form == DW_FORM_implicit_const) | |
| read_sleb128 (&count_buf); | |
| } | |
| if (num_attrs == 0) | |
| { | |
| attrs = NULL; | |
| read_uleb128 (&abbrev_buf); | |
| read_uleb128 (&abbrev_buf); | |
| } | |
| else | |
| { | |
| attrs = ((struct attr *) | |
| backtrace_alloc (state, num_attrs * sizeof *attrs, | |
| error_callback, data)); | |
| if (attrs == NULL) | |
| goto fail; | |
| num_attrs = 0; | |
| while (1) | |
| { | |
| uint64_t name; | |
| uint64_t form; | |
| name = read_uleb128 (&abbrev_buf); | |
| form = read_uleb128 (&abbrev_buf); | |
| if (name == 0) | |
| break; | |
| attrs[num_attrs].name = (enum dwarf_attribute) name; | |
| attrs[num_attrs].form = (enum dwarf_form) form; | |
| if ((enum dwarf_form) form == DW_FORM_implicit_const) | |
| attrs[num_attrs].val = read_sleb128 (&abbrev_buf); | |
| else | |
| attrs[num_attrs].val = 0; | |
| ++num_attrs; | |
| } | |
| } | |
| a.num_attrs = num_attrs; | |
| a.attrs = attrs; | |
| abbrevs->abbrevs[num_abbrevs] = a; | |
| ++num_abbrevs; | |
| } | |
| backtrace_qsort (abbrevs->abbrevs, abbrevs->num_abbrevs, | |
| sizeof (struct abbrev), abbrev_compare); | |
| return 1; | |
| fail: | |
| free_abbrevs (state, abbrevs, error_callback, data); | |
| return 0; | |
| } | |
| /* Return the abbrev information for an abbrev code. */ | |
| static const struct abbrev * | |
| lookup_abbrev (struct abbrevs *abbrevs, uint64_t code, | |
| backtrace_error_callback error_callback, void *data) | |
| { | |
| struct abbrev key; | |
| void *p; | |
| /* With GCC, where abbrevs are simply numbered in order, we should | |
| be able to just look up the entry. */ | |
| if (code - 1 < abbrevs->num_abbrevs | |
| && abbrevs->abbrevs[code - 1].code == code) | |
| return &abbrevs->abbrevs[code - 1]; | |
| /* Otherwise we have to search. */ | |
| memset (&key, 0, sizeof key); | |
| key.code = code; | |
| p = bsearch (&key, abbrevs->abbrevs, abbrevs->num_abbrevs, | |
| sizeof (struct abbrev), abbrev_compare); | |
| if (p == NULL) | |
| { | |
| error_callback (data, "invalid abbreviation code", 0); | |
| return NULL; | |
| } | |
| return (const struct abbrev *) p; | |
| } | |
| /* This struct is used to gather address range information while | |
| reading attributes. We use this while building a mapping from | |
| address ranges to compilation units and then again while mapping | |
| from address ranges to function entries. Normally either | |
| lowpc/highpc is set or ranges is set. */ | |
| struct pcrange { | |
| uintptr_t lowpc; /* The low PC value. */ | |
| int have_lowpc; /* Whether a low PC value was found. */ | |
| int lowpc_is_addr_index; /* Whether lowpc is in .debug_addr. */ | |
| uintptr_t highpc; /* The high PC value. */ | |
| int have_highpc; /* Whether a high PC value was found. */ | |
| int highpc_is_relative; /* Whether highpc is relative to lowpc. */ | |
| int highpc_is_addr_index; /* Whether highpc is in .debug_addr. */ | |
| uint64_t ranges; /* Offset in ranges section. */ | |
| int have_ranges; /* Whether ranges is valid. */ | |
| int ranges_is_index; /* Whether ranges is DW_FORM_rnglistx. */ | |
| }; | |
| /* Update PCRANGE from an attribute value. */ | |
| static void | |
| update_pcrange (const struct attr* attr, const struct attr_val* val, | |
| struct pcrange *pcrange) | |
| { | |
| switch (attr->name) | |
| { | |
| case DW_AT_low_pc: | |
| if (val->encoding == ATTR_VAL_ADDRESS) | |
| { | |
| pcrange->lowpc = (uintptr_t) val->u.uint; | |
| pcrange->have_lowpc = 1; | |
| } | |
| else if (val->encoding == ATTR_VAL_ADDRESS_INDEX) | |
| { | |
| pcrange->lowpc = (uintptr_t) val->u.uint; | |
| pcrange->have_lowpc = 1; | |
| pcrange->lowpc_is_addr_index = 1; | |
| } | |
| break; | |
| case DW_AT_high_pc: | |
| if (val->encoding == ATTR_VAL_ADDRESS) | |
| { | |
| pcrange->highpc = (uintptr_t) val->u.uint; | |
| pcrange->have_highpc = 1; | |
| } | |
| else if (val->encoding == ATTR_VAL_UINT) | |
| { | |
| pcrange->highpc = (uintptr_t) val->u.uint; | |
| pcrange->have_highpc = 1; | |
| pcrange->highpc_is_relative = 1; | |
| } | |
| else if (val->encoding == ATTR_VAL_ADDRESS_INDEX) | |
| { | |
| pcrange->highpc = (uintptr_t) val->u.uint; | |
| pcrange->have_highpc = 1; | |
| pcrange->highpc_is_addr_index = 1; | |
| } | |
| break; | |
| case DW_AT_ranges: | |
| if (val->encoding == ATTR_VAL_UINT | |
| || val->encoding == ATTR_VAL_REF_SECTION) | |
| { | |
| pcrange->ranges = val->u.uint; | |
| pcrange->have_ranges = 1; | |
| } | |
| else if (val->encoding == ATTR_VAL_RNGLISTS_INDEX) | |
| { | |
| pcrange->ranges = val->u.uint; | |
| pcrange->have_ranges = 1; | |
| pcrange->ranges_is_index = 1; | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| /* Call ADD_RANGE for a low/high PC pair. Returns 1 on success, 0 on | |
| error. */ | |
| static int | |
| add_low_high_range (struct backtrace_state *state, | |
| const struct dwarf_sections *dwarf_sections, | |
| struct libbacktrace_base_address base_address, | |
| int is_bigendian, struct unit *u, | |
| const struct pcrange *pcrange, | |
| int (*add_range) (struct backtrace_state *state, | |
| void *rdata, uintptr_t lowpc, | |
| uintptr_t highpc, | |
| backtrace_error_callback error_callback, | |
| void *data, void *vec), | |
| void *rdata, | |
| backtrace_error_callback error_callback, void *data, | |
| void *vec) | |
| { | |
| uintptr_t lowpc; | |
| uintptr_t highpc; | |
| lowpc = pcrange->lowpc; | |
| if (pcrange->lowpc_is_addr_index) | |
| { | |
| if (!resolve_addr_index (dwarf_sections, u->addr_base, u->addrsize, | |
| is_bigendian, lowpc, error_callback, data, | |
| &lowpc)) | |
| return 0; | |
| } | |
| highpc = pcrange->highpc; | |
| if (pcrange->highpc_is_addr_index) | |
| { | |
| if (!resolve_addr_index (dwarf_sections, u->addr_base, u->addrsize, | |
| is_bigendian, highpc, error_callback, data, | |
| &highpc)) | |
| return 0; | |
| } | |
| if (pcrange->highpc_is_relative) | |
| highpc += lowpc; | |
| /* Add in the base address of the module when recording PC values, | |
| so that we can look up the PC directly. */ | |
| lowpc = libbacktrace_add_base (lowpc, base_address); | |
| highpc = libbacktrace_add_base (highpc, base_address); | |
| return add_range (state, rdata, lowpc, highpc, error_callback, data, vec); | |
| } | |
| /* Call ADD_RANGE for each range read from .debug_ranges, as used in | |
| DWARF versions 2 through 4. */ | |
| static int | |
| add_ranges_from_ranges ( | |
| struct backtrace_state *state, | |
| const struct dwarf_sections *dwarf_sections, | |
| struct libbacktrace_base_address base_address, int is_bigendian, | |
| struct unit *u, uintptr_t base, | |
| const struct pcrange *pcrange, | |
| int (*add_range) (struct backtrace_state *state, void *rdata, | |
| uintptr_t lowpc, uintptr_t highpc, | |
| backtrace_error_callback error_callback, void *data, | |
| void *vec), | |
| void *rdata, | |
| backtrace_error_callback error_callback, void *data, | |
| void *vec) | |
| { | |
| struct dwarf_buf ranges_buf; | |
| if (pcrange->ranges >= dwarf_sections->size[DEBUG_RANGES]) | |
| { | |
| error_callback (data, "ranges offset out of range", 0); | |
| return 0; | |
| } | |
| ranges_buf.name = ".debug_ranges"; | |
| ranges_buf.start = dwarf_sections->data[DEBUG_RANGES]; | |
| ranges_buf.buf = dwarf_sections->data[DEBUG_RANGES] + pcrange->ranges; | |
| ranges_buf.left = dwarf_sections->size[DEBUG_RANGES] - pcrange->ranges; | |
| ranges_buf.is_bigendian = is_bigendian; | |
| ranges_buf.error_callback = error_callback; | |
| ranges_buf.data = data; | |
| ranges_buf.reported_underflow = 0; | |
| while (1) | |
| { | |
| uint64_t low; | |
| uint64_t high; | |
| if (ranges_buf.reported_underflow) | |
| return 0; | |
| low = read_address (&ranges_buf, u->addrsize); | |
| high = read_address (&ranges_buf, u->addrsize); | |
| if (low == 0 && high == 0) | |
| break; | |
| if (is_highest_address (low, u->addrsize)) | |
| base = (uintptr_t) high; | |
| else | |
| { | |
| uintptr_t rl, rh; | |
| rl = libbacktrace_add_base ((uintptr_t) low + base, base_address); | |
| rh = libbacktrace_add_base ((uintptr_t) high + base, base_address); | |
| if (!add_range (state, rdata, rl, rh, error_callback, data, vec)) | |
| return 0; | |
| } | |
| } | |
| if (ranges_buf.reported_underflow) | |
| return 0; | |
| return 1; | |
| } | |
| /* Call ADD_RANGE for each range read from .debug_rnglists, as used in | |
| DWARF version 5. */ | |
| static int | |
| add_ranges_from_rnglists ( | |
| struct backtrace_state *state, | |
| const struct dwarf_sections *dwarf_sections, | |
| struct libbacktrace_base_address base_address, int is_bigendian, | |
| struct unit *u, uintptr_t base, | |
| const struct pcrange *pcrange, | |
| int (*add_range) (struct backtrace_state *state, void *rdata, | |
| uintptr_t lowpc, uintptr_t highpc, | |
| backtrace_error_callback error_callback, void *data, | |
| void *vec), | |
| void *rdata, | |
| backtrace_error_callback error_callback, void *data, | |
| void *vec) | |
| { | |
| uint64_t offset; | |
| struct dwarf_buf rnglists_buf; | |
| if (!pcrange->ranges_is_index) | |
| offset = pcrange->ranges; | |
| else | |
| offset = u->rnglists_base + pcrange->ranges * (u->is_dwarf64 ? 8 : 4); | |
| if (offset >= dwarf_sections->size[DEBUG_RNGLISTS]) | |
| { | |
| error_callback (data, "rnglists offset out of range", 0); | |
| return 0; | |
| } | |
| rnglists_buf.name = ".debug_rnglists"; | |
| rnglists_buf.start = dwarf_sections->data[DEBUG_RNGLISTS]; | |
| rnglists_buf.buf = dwarf_sections->data[DEBUG_RNGLISTS] + offset; | |
| rnglists_buf.left = dwarf_sections->size[DEBUG_RNGLISTS] - offset; | |
| rnglists_buf.is_bigendian = is_bigendian; | |
| rnglists_buf.error_callback = error_callback; | |
| rnglists_buf.data = data; | |
| rnglists_buf.reported_underflow = 0; | |
| if (pcrange->ranges_is_index) | |
| { | |
| offset = read_offset (&rnglists_buf, u->is_dwarf64); | |
| offset += u->rnglists_base; | |
| if (offset >= dwarf_sections->size[DEBUG_RNGLISTS]) | |
| { | |
| error_callback (data, "rnglists index offset out of range", 0); | |
| return 0; | |
| } | |
| rnglists_buf.buf = dwarf_sections->data[DEBUG_RNGLISTS] + offset; | |
| rnglists_buf.left = dwarf_sections->size[DEBUG_RNGLISTS] - offset; | |
| } | |
| while (1) | |
| { | |
| unsigned char rle; | |
| rle = read_byte (&rnglists_buf); | |
| if (rle == DW_RLE_end_of_list) | |
| break; | |
| switch (rle) | |
| { | |
| case DW_RLE_base_addressx: | |
| { | |
| uint64_t index; | |
| index = read_uleb128 (&rnglists_buf); | |
| if (!resolve_addr_index (dwarf_sections, u->addr_base, | |
| u->addrsize, is_bigendian, index, | |
| error_callback, data, &base)) | |
| return 0; | |
| } | |
| break; | |
| case DW_RLE_startx_endx: | |
| { | |
| uint64_t index; | |
| uintptr_t low; | |
| uintptr_t high; | |
| index = read_uleb128 (&rnglists_buf); | |
| if (!resolve_addr_index (dwarf_sections, u->addr_base, | |
| u->addrsize, is_bigendian, index, | |
| error_callback, data, &low)) | |
| return 0; | |
| index = read_uleb128 (&rnglists_buf); | |
| if (!resolve_addr_index (dwarf_sections, u->addr_base, | |
| u->addrsize, is_bigendian, index, | |
| error_callback, data, &high)) | |
| return 0; | |
| if (!add_range (state, rdata, | |
| libbacktrace_add_base (low, base_address), | |
| libbacktrace_add_base (high, base_address), | |
| error_callback, data, vec)) | |
| return 0; | |
| } | |
| break; | |
| case DW_RLE_startx_length: | |
| { | |
| uint64_t index; | |
| uintptr_t low; | |
| uintptr_t length; | |
| index = read_uleb128 (&rnglists_buf); | |
| if (!resolve_addr_index (dwarf_sections, u->addr_base, | |
| u->addrsize, is_bigendian, index, | |
| error_callback, data, &low)) | |
| return 0; | |
| length = read_uleb128 (&rnglists_buf); | |
| low = libbacktrace_add_base (low, base_address); | |
| if (!add_range (state, rdata, low, low + length, | |
| error_callback, data, vec)) | |
| return 0; | |
| } | |
| break; | |
| case DW_RLE_offset_pair: | |
| { | |
| uint64_t low; | |
| uint64_t high; | |
| low = read_uleb128 (&rnglists_buf); | |
| high = read_uleb128 (&rnglists_buf); | |
| if (!add_range (state, rdata, | |
| libbacktrace_add_base (low + base, base_address), | |
| libbacktrace_add_base (high + base, base_address), | |
| error_callback, data, vec)) | |
| return 0; | |
| } | |
| break; | |
| case DW_RLE_base_address: | |
| base = (uintptr_t) read_address (&rnglists_buf, u->addrsize); | |
| break; | |
| case DW_RLE_start_end: | |
| { | |
| uintptr_t low; | |
| uintptr_t high; | |
| low = (uintptr_t) read_address (&rnglists_buf, u->addrsize); | |
| high = (uintptr_t) read_address (&rnglists_buf, u->addrsize); | |
| if (!add_range (state, rdata, | |
| libbacktrace_add_base (low, base_address), | |
| libbacktrace_add_base (high, base_address), | |
| error_callback, data, vec)) | |
| return 0; | |
| } | |
| break; | |
| case DW_RLE_start_length: | |
| { | |
| uintptr_t low; | |
| uintptr_t length; | |
| low = (uintptr_t) read_address (&rnglists_buf, u->addrsize); | |
| length = (uintptr_t) read_uleb128 (&rnglists_buf); | |
| low = libbacktrace_add_base (low, base_address); | |
| if (!add_range (state, rdata, low, low + length, | |
| error_callback, data, vec)) | |
| return 0; | |
| } | |
| break; | |
| default: | |
| dwarf_buf_error (&rnglists_buf, "unrecognized DW_RLE value", -1); | |
| return 0; | |
| } | |
| } | |
| if (rnglists_buf.reported_underflow) | |
| return 0; | |
| return 1; | |
| } | |
| /* Call ADD_RANGE for each lowpc/highpc pair in PCRANGE. RDATA is | |
| passed to ADD_RANGE, and is either a struct unit * or a struct | |
| function *. VEC is the vector we are adding ranges to, and is | |
| either a struct unit_addrs_vector * or a struct function_vector *. | |
| Returns 1 on success, 0 on error. */ | |
| static int | |
| add_ranges (struct backtrace_state *state, | |
| const struct dwarf_sections *dwarf_sections, | |
| struct libbacktrace_base_address base_address, int is_bigendian, | |
| struct unit *u, uintptr_t base, const struct pcrange *pcrange, | |
| int (*add_range) (struct backtrace_state *state, void *rdata, | |
| uintptr_t lowpc, uintptr_t highpc, | |
| backtrace_error_callback error_callback, | |
| void *data, void *vec), | |
| void *rdata, | |
| backtrace_error_callback error_callback, void *data, | |
| void *vec) | |
| { | |
| if (pcrange->have_lowpc && pcrange->have_highpc) | |
| return add_low_high_range (state, dwarf_sections, base_address, | |
| is_bigendian, u, pcrange, add_range, rdata, | |
| error_callback, data, vec); | |
| if (!pcrange->have_ranges) | |
| { | |
| /* Did not find any address ranges to add. */ | |
| return 1; | |
| } | |
| if (u->version < 5) | |
| return add_ranges_from_ranges (state, dwarf_sections, base_address, | |
| is_bigendian, u, base, pcrange, add_range, | |
| rdata, error_callback, data, vec); | |
| else | |
| return add_ranges_from_rnglists (state, dwarf_sections, base_address, | |
| is_bigendian, u, base, pcrange, add_range, | |
| rdata, error_callback, data, vec); | |
| } | |
| /* Find the address range covered by a compilation unit, reading from | |
| UNIT_BUF and adding values to U. Returns 1 if all data could be | |
| read, 0 if there is some error. */ | |
| static int | |
| find_address_ranges (struct backtrace_state *state, | |
| struct libbacktrace_base_address base_address, | |
| struct dwarf_buf *unit_buf, | |
| const struct dwarf_sections *dwarf_sections, | |
| int is_bigendian, struct dwarf_data *altlink, | |
| backtrace_error_callback error_callback, void *data, | |
| struct unit *u, struct unit_addrs_vector *addrs, | |
| enum dwarf_tag *unit_tag) | |
| { | |
| while (unit_buf->left > 0) | |
| { | |
| uint64_t code; | |
| const struct abbrev *abbrev; | |
| struct pcrange pcrange; | |
| struct attr_val name_val; | |
| int have_name_val; | |
| struct attr_val comp_dir_val; | |
| int have_comp_dir_val; | |
| size_t i; | |
| code = read_uleb128 (unit_buf); | |
| if (code == 0) | |
| return 1; | |
| abbrev = lookup_abbrev (&u->abbrevs, code, error_callback, data); | |
| if (abbrev == NULL) | |
| return 0; | |
| if (unit_tag != NULL) | |
| *unit_tag = abbrev->tag; | |
| memset (&pcrange, 0, sizeof pcrange); | |
| memset (&name_val, 0, sizeof name_val); | |
| have_name_val = 0; | |
| memset (&comp_dir_val, 0, sizeof comp_dir_val); | |
| have_comp_dir_val = 0; | |
| for (i = 0; i < abbrev->num_attrs; ++i) | |
| { | |
| struct attr_val val; | |
| if (!read_attribute (abbrev->attrs[i].form, abbrev->attrs[i].val, | |
| unit_buf, u->is_dwarf64, u->version, | |
| u->addrsize, dwarf_sections, altlink, &val)) | |
| return 0; | |
| switch (abbrev->attrs[i].name) | |
| { | |
| case DW_AT_low_pc: case DW_AT_high_pc: case DW_AT_ranges: | |
| update_pcrange (&abbrev->attrs[i], &val, &pcrange); | |
| break; | |
| case DW_AT_stmt_list: | |
| if ((abbrev->tag == DW_TAG_compile_unit | |
| || abbrev->tag == DW_TAG_skeleton_unit) | |
| && (val.encoding == ATTR_VAL_UINT | |
| || val.encoding == ATTR_VAL_REF_SECTION)) | |
| u->lineoff = val.u.uint; | |
| break; | |
| case DW_AT_name: | |
| if (abbrev->tag == DW_TAG_compile_unit | |
| || abbrev->tag == DW_TAG_skeleton_unit) | |
| { | |
| name_val = val; | |
| have_name_val = 1; | |
| } | |
| break; | |
| case DW_AT_comp_dir: | |
| if (abbrev->tag == DW_TAG_compile_unit | |
| || abbrev->tag == DW_TAG_skeleton_unit) | |
| { | |
| comp_dir_val = val; | |
| have_comp_dir_val = 1; | |
| } | |
| break; | |
| case DW_AT_str_offsets_base: | |
| if ((abbrev->tag == DW_TAG_compile_unit | |
| || abbrev->tag == DW_TAG_skeleton_unit) | |
| && val.encoding == ATTR_VAL_REF_SECTION) | |
| u->str_offsets_base = val.u.uint; | |
| break; | |
| case DW_AT_addr_base: | |
| if ((abbrev->tag == DW_TAG_compile_unit | |
| || abbrev->tag == DW_TAG_skeleton_unit) | |
| && val.encoding == ATTR_VAL_REF_SECTION) | |
| u->addr_base = val.u.uint; | |
| break; | |
| case DW_AT_rnglists_base: | |
| if ((abbrev->tag == DW_TAG_compile_unit | |
| || abbrev->tag == DW_TAG_skeleton_unit) | |
| && val.encoding == ATTR_VAL_REF_SECTION) | |
| u->rnglists_base = val.u.uint; | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| // Resolve strings after we're sure that we have seen | |
| // DW_AT_str_offsets_base. | |
| if (have_name_val) | |
| { | |
| if (!resolve_string (dwarf_sections, u->is_dwarf64, is_bigendian, | |
| u->str_offsets_base, &name_val, | |
| error_callback, data, &u->filename)) | |
| return 0; | |
| } | |
| if (have_comp_dir_val) | |
| { | |
| if (!resolve_string (dwarf_sections, u->is_dwarf64, is_bigendian, | |
| u->str_offsets_base, &comp_dir_val, | |
| error_callback, data, &u->comp_dir)) | |
| return 0; | |
| } | |
| if (abbrev->tag == DW_TAG_compile_unit | |
| || abbrev->tag == DW_TAG_subprogram | |
| || abbrev->tag == DW_TAG_skeleton_unit) | |
| { | |
| if (!add_ranges (state, dwarf_sections, base_address, | |
| is_bigendian, u, pcrange.lowpc, &pcrange, | |
| add_unit_addr, (void *) u, error_callback, data, | |
| (void *) addrs)) | |
| return 0; | |
| /* If we found the PC range in the DW_TAG_compile_unit or | |
| DW_TAG_skeleton_unit, we can stop now. */ | |
| if ((abbrev->tag == DW_TAG_compile_unit | |
| || abbrev->tag == DW_TAG_skeleton_unit) | |
| && (pcrange.have_ranges | |
| || (pcrange.have_lowpc && pcrange.have_highpc))) | |
| return 1; | |
| } | |
| if (abbrev->has_children) | |
| { | |
| if (!find_address_ranges (state, base_address, unit_buf, | |
| dwarf_sections, is_bigendian, altlink, | |
| error_callback, data, u, addrs, NULL)) | |
| return 0; | |
| } | |
| } | |
| return 1; | |
| } | |
| /* Build a mapping from address ranges to the compilation units where | |
| the line number information for that range can be found. Returns 1 | |
| on success, 0 on failure. */ | |
| static int | |
| build_address_map (struct backtrace_state *state, | |
| struct libbacktrace_base_address base_address, | |
| const struct dwarf_sections *dwarf_sections, | |
| int is_bigendian, struct dwarf_data *altlink, | |
| backtrace_error_callback error_callback, void *data, | |
| struct unit_addrs_vector *addrs, | |
| struct unit_vector *unit_vec) | |
| { | |
| struct dwarf_buf info; | |
| struct backtrace_vector units; | |
| size_t units_count; | |
| size_t i; | |
| struct unit **pu; | |
| size_t unit_offset = 0; | |
| struct unit_addrs *pa; | |
| memset (&addrs->vec, 0, sizeof addrs->vec); | |
| memset (&unit_vec->vec, 0, sizeof unit_vec->vec); | |
| addrs->count = 0; | |
| unit_vec->count = 0; | |
| /* Read through the .debug_info section. FIXME: Should we use the | |
| .debug_aranges section? gdb and addr2line don't use it, but I'm | |
| not sure why. */ | |
| info.name = ".debug_info"; | |
| info.start = dwarf_sections->data[DEBUG_INFO]; | |
| info.buf = info.start; | |
| info.left = dwarf_sections->size[DEBUG_INFO]; | |
| info.is_bigendian = is_bigendian; | |
| info.error_callback = error_callback; | |
| info.data = data; | |
| info.reported_underflow = 0; | |
| memset (&units, 0, sizeof units); | |
| units_count = 0; | |
| while (info.left > 0) | |
| { | |
| const unsigned char *unit_data_start; | |
| uint64_t len; | |
| int is_dwarf64; | |
| struct dwarf_buf unit_buf; | |
| int version; | |
| int unit_type; | |
| uint64_t abbrev_offset; | |
| int addrsize; | |
| struct unit *u; | |
| enum dwarf_tag unit_tag; | |
| if (info.reported_underflow) | |
| goto fail; | |
| unit_data_start = info.buf; | |
| len = read_initial_length (&info, &is_dwarf64); | |
| unit_buf = info; | |
| unit_buf.left = len; | |
| if (!advance (&info, len)) | |
| goto fail; | |
| version = read_uint16 (&unit_buf); | |
| if (version < 2 || version > 5) | |
| { | |
| dwarf_buf_error (&unit_buf, "unrecognized DWARF version", -1); | |
| goto fail; | |
| } | |
| if (version < 5) | |
| unit_type = 0; | |
| else | |
| { | |
| unit_type = read_byte (&unit_buf); | |
| if (unit_type == DW_UT_type || unit_type == DW_UT_split_type) | |
| { | |
| /* This unit doesn't have anything we need. */ | |
| continue; | |
| } | |
| } | |
| pu = ((struct unit **) | |
| backtrace_vector_grow (state, sizeof (struct unit *), | |
| error_callback, data, &units)); | |
| if (pu == NULL) | |
| goto fail; | |
| u = ((struct unit *) | |
| backtrace_alloc (state, sizeof *u, error_callback, data)); | |
| if (u == NULL) | |
| goto fail; | |
| *pu = u; | |
| ++units_count; | |
| if (version < 5) | |
| addrsize = 0; /* Set below. */ | |
| else | |
| addrsize = read_byte (&unit_buf); | |
| memset (&u->abbrevs, 0, sizeof u->abbrevs); | |
| abbrev_offset = read_offset (&unit_buf, is_dwarf64); | |
| if (!read_abbrevs (state, abbrev_offset, | |
| dwarf_sections->data[DEBUG_ABBREV], | |
| dwarf_sections->size[DEBUG_ABBREV], | |
| is_bigendian, error_callback, data, &u->abbrevs)) | |
| goto fail; | |
| if (version < 5) | |
| addrsize = read_byte (&unit_buf); | |
| switch (unit_type) | |
| { | |
| case 0: | |
| break; | |
| case DW_UT_compile: case DW_UT_partial: | |
| break; | |
| case DW_UT_skeleton: case DW_UT_split_compile: | |
| read_uint64 (&unit_buf); /* dwo_id */ | |
| break; | |
| default: | |
| break; | |
| } | |
| u->low_offset = unit_offset; | |
| unit_offset += len + (is_dwarf64 ? 12 : 4); | |
| u->high_offset = unit_offset; | |
| u->unit_data = unit_buf.buf; | |
| u->unit_data_len = unit_buf.left; | |
| u->unit_data_offset = unit_buf.buf - unit_data_start; | |
| u->version = version; | |
| u->is_dwarf64 = is_dwarf64; | |
| u->addrsize = addrsize; | |
| u->filename = NULL; | |
| u->comp_dir = NULL; | |
| u->abs_filename = NULL; | |
| u->lineoff = 0; | |
| u->str_offsets_base = 0; | |
| u->addr_base = 0; | |
| u->rnglists_base = 0; | |
| /* The actual line number mappings will be read as needed. */ | |
| u->lines = NULL; | |
| u->lines_count = 0; | |
| u->function_addrs = NULL; | |
| u->function_addrs_count = 0; | |
| if (!find_address_ranges (state, base_address, &unit_buf, dwarf_sections, | |
| is_bigendian, altlink, error_callback, data, | |
| u, addrs, &unit_tag)) | |
| goto fail; | |
| if (unit_buf.reported_underflow) | |
| goto fail; | |
| } | |
| if (info.reported_underflow) | |
| goto fail; | |
| /* Add a trailing addrs entry, but don't include it in addrs->count. */ | |
| pa = ((struct unit_addrs *) | |
| backtrace_vector_grow (state, sizeof (struct unit_addrs), | |
| error_callback, data, &addrs->vec)); | |
| if (pa == NULL) | |
| goto fail; | |
| pa->low = 0; | |
| --pa->low; | |
| pa->high = pa->low; | |
| pa->u = NULL; | |
| unit_vec->vec = units; | |
| unit_vec->count = units_count; | |
| return 1; | |
| fail: | |
| if (units_count > 0) | |
| { | |
| pu = (struct unit **) units.base; | |
| for (i = 0; i < units_count; i++) | |
| { | |
| free_abbrevs (state, &pu[i]->abbrevs, error_callback, data); | |
| backtrace_free (state, pu[i], sizeof **pu, error_callback, data); | |
| } | |
| backtrace_vector_free (state, &units, error_callback, data); | |
| } | |
| if (addrs->count > 0) | |
| { | |
| backtrace_vector_free (state, &addrs->vec, error_callback, data); | |
| addrs->count = 0; | |
| } | |
| return 0; | |
| } | |
| /* Add a new mapping to the vector of line mappings that we are | |
| building. Returns 1 on success, 0 on failure. */ | |
| static int | |
| add_line (struct backtrace_state *state, struct dwarf_data *ddata, | |
| uintptr_t pc, const char *filename, int lineno, int disc, | |
| backtrace_error_callback error_callback, void *data, | |
| struct line_vector *vec) | |
| { | |
| struct line *ln; | |
| /* If we are adding the same mapping, ignore it. This can happen | |
| when using discriminators. */ | |
| if (vec->count > 0) | |
| { | |
| ln = (struct line *) vec->vec.base + (vec->count - 1); | |
| if (pc == ln->pc && filename == ln->filename && lineno == ln->lineno) | |
| { | |
| /* We only care about the discriminator if moredata is true. */ | |
| if (!state->moredata) | |
| return 1; | |
| if (disc == ln->disc) | |
| return 1; | |
| } | |
| } | |
| ln = ((struct line *) | |
| backtrace_vector_grow (state, sizeof (struct line), error_callback, | |
| data, &vec->vec)); | |
| if (ln == NULL) | |
| return 0; | |
| /* Add in the base address here, so that we can look up the PC | |
| directly. */ | |
| ln->pc = libbacktrace_add_base (pc, ddata->base_address); | |
| ln->filename = filename; | |
| ln->lineno = lineno; | |
| ln->disc = disc; | |
| ln->idx = vec->count; | |
| ++vec->count; | |
| return 1; | |
| } | |
| /* Free the line header information. */ | |
| static void | |
| free_line_header (struct backtrace_state *state, struct line_header *hdr, | |
| backtrace_error_callback error_callback, void *data) | |
| { | |
| if (hdr->dirs_count != 0) | |
| backtrace_free (state, hdr->dirs, hdr->dirs_count * sizeof (const char *), | |
| error_callback, data); | |
| backtrace_free (state, hdr->filenames, | |
| hdr->filenames_count * sizeof (char *), | |
| error_callback, data); | |
| } | |
| /* Read the directories and file names for a line header for version | |
| 2, setting fields in HDR. Return 1 on success, 0 on failure. */ | |
| static int | |
| read_v2_paths (struct backtrace_state *state, struct unit *u, | |
| struct dwarf_buf *hdr_buf, struct line_header *hdr) | |
| { | |
| const unsigned char *p; | |
| const unsigned char *pend; | |
| size_t i; | |
| /* Count the number of directory entries. */ | |
| hdr->dirs_count = 0; | |
| p = hdr_buf->buf; | |
| pend = p + hdr_buf->left; | |
| while (p < pend && *p != '\0') | |
| { | |
| p += strnlen((const char *) p, pend - p) + 1; | |
| ++hdr->dirs_count; | |
| } | |
| /* The index of the first entry in the list of directories is 1. Index 0 is | |
| used for the current directory of the compilation. To simplify index | |
| handling, we set entry 0 to the compilation unit directory. */ | |
| ++hdr->dirs_count; | |
| hdr->dirs = ((const char **) | |
| backtrace_alloc (state, | |
| hdr->dirs_count * sizeof (const char *), | |
| hdr_buf->error_callback, | |
| hdr_buf->data)); | |
| if (hdr->dirs == NULL) | |
| return 0; | |
| hdr->dirs[0] = u->comp_dir; | |
| i = 1; | |
| while (*hdr_buf->buf != '\0') | |
| { | |
| if (hdr_buf->reported_underflow) | |
| return 0; | |
| hdr->dirs[i] = read_string (hdr_buf); | |
| if (hdr->dirs[i] == NULL) | |
| return 0; | |
| ++i; | |
| } | |
| if (!advance (hdr_buf, 1)) | |
| return 0; | |
| /* Count the number of file entries. */ | |
| hdr->filenames_count = 0; | |
| p = hdr_buf->buf; | |
| pend = p + hdr_buf->left; | |
| while (p < pend && *p != '\0') | |
| { | |
| p += strnlen ((const char *) p, pend - p) + 1; | |
| p += leb128_len (p); | |
| p += leb128_len (p); | |
| p += leb128_len (p); | |
| ++hdr->filenames_count; | |
| } | |
| /* The index of the first entry in the list of file names is 1. Index 0 is | |
| used for the DW_AT_name of the compilation unit. To simplify index | |
| handling, we set entry 0 to the compilation unit file name. */ | |
| ++hdr->filenames_count; | |
| hdr->filenames = ((const char **) | |
| backtrace_alloc (state, | |
| hdr->filenames_count * sizeof (char *), | |
| hdr_buf->error_callback, | |
| hdr_buf->data)); | |
| if (hdr->filenames == NULL) | |
| return 0; | |
| hdr->filenames[0] = u->filename; | |
| i = 1; | |
| while (*hdr_buf->buf != '\0') | |
| { | |
| const char *filename; | |
| uint64_t dir_index; | |
| if (hdr_buf->reported_underflow) | |
| return 0; | |
| filename = read_string (hdr_buf); | |
| if (filename == NULL) | |
| return 0; | |
| dir_index = read_uleb128 (hdr_buf); | |
| if (IS_ABSOLUTE_PATH (filename) | |
| || (dir_index < hdr->dirs_count && hdr->dirs[dir_index] == NULL)) | |
| hdr->filenames[i] = filename; | |
| else | |
| { | |
| const char *dir; | |
| size_t dir_len; | |
| size_t filename_len; | |
| char *s; | |
| if (dir_index < hdr->dirs_count) | |
| dir = hdr->dirs[dir_index]; | |
| else | |
| { | |
| dwarf_buf_error (hdr_buf, | |
| ("invalid directory index in " | |
| "line number program header"), | |
| 0); | |
| return 0; | |
| } | |
| dir_len = strlen (dir); | |
| filename_len = strlen (filename); | |
| s = ((char *) backtrace_alloc (state, dir_len + filename_len + 2, | |
| hdr_buf->error_callback, | |
| hdr_buf->data)); | |
| if (s == NULL) | |
| return 0; | |
| memcpy (s, dir, dir_len); | |
| /* FIXME: If we are on a DOS-based file system, and the | |
| directory or the file name use backslashes, then we | |
| should use a backslash here. */ | |
| s[dir_len] = '/'; | |
| memcpy (s + dir_len + 1, filename, filename_len + 1); | |
| hdr->filenames[i] = s; | |
| } | |
| /* Ignore the modification time and size. */ | |
| read_uleb128 (hdr_buf); | |
| read_uleb128 (hdr_buf); | |
| ++i; | |
| } | |
| return 1; | |
| } | |
| /* Read a single version 5 LNCT entry for a directory or file name in a | |
| line header. Sets *STRING to the resulting name, ignoring other | |
| data. Return 1 on success, 0 on failure. */ | |
| static int | |
| read_lnct (struct backtrace_state *state, struct dwarf_data *ddata, | |
| struct unit *u, struct dwarf_buf *hdr_buf, | |
| const struct line_header *hdr, size_t formats_count, | |
| const struct line_header_format *formats, const char **string) | |
| { | |
| size_t i; | |
| const char *dir; | |
| const char *path; | |
| dir = NULL; | |
| path = NULL; | |
| for (i = 0; i < formats_count; i++) | |
| { | |
| struct attr_val val; | |
| if (!read_attribute (formats[i].form, 0, hdr_buf, u->is_dwarf64, | |
| u->version, hdr->addrsize, &ddata->dwarf_sections, | |
| ddata->altlink, &val)) | |
| return 0; | |
| switch (formats[i].lnct) | |
| { | |
| case DW_LNCT_path: | |
| if (!resolve_string (&ddata->dwarf_sections, u->is_dwarf64, | |
| ddata->is_bigendian, u->str_offsets_base, | |
| &val, hdr_buf->error_callback, hdr_buf->data, | |
| &path)) | |
| return 0; | |
| break; | |
| case DW_LNCT_directory_index: | |
| if (val.encoding == ATTR_VAL_UINT) | |
| { | |
| if (val.u.uint >= hdr->dirs_count) | |
| { | |
| dwarf_buf_error (hdr_buf, | |
| ("invalid directory index in " | |
| "line number program header"), | |
| 0); | |
| return 0; | |
| } | |
| dir = hdr->dirs[val.u.uint]; | |
| } | |
| break; | |
| default: | |
| /* We don't care about timestamps or sizes or hashes. */ | |
| break; | |
| } | |
| } | |
| if (path == NULL) | |
| { | |
| dwarf_buf_error (hdr_buf, | |
| "missing file name in line number program header", | |
| 0); | |
| return 0; | |
| } | |
| if (dir == NULL) | |
| *string = path; | |
| else | |
| { | |
| size_t dir_len; | |
| size_t path_len; | |
| char *s; | |
| dir_len = strlen (dir); | |
| path_len = strlen (path); | |
| s = (char *) backtrace_alloc (state, dir_len + path_len + 2, | |
| hdr_buf->error_callback, hdr_buf->data); | |
| if (s == NULL) | |
| return 0; | |
| memcpy (s, dir, dir_len); | |
| /* FIXME: If we are on a DOS-based file system, and the | |
| directory or the path name use backslashes, then we should | |
| use a backslash here. */ | |
| s[dir_len] = '/'; | |
| memcpy (s + dir_len + 1, path, path_len + 1); | |
| *string = s; | |
| } | |
| return 1; | |
| } | |
| /* Read a set of DWARF 5 line header format entries, setting *PCOUNT | |
| and *PPATHS. Return 1 on success, 0 on failure. */ | |
| static int | |
| read_line_header_format_entries (struct backtrace_state *state, | |
| struct dwarf_data *ddata, | |
| struct unit *u, | |
| struct dwarf_buf *hdr_buf, | |
| struct line_header *hdr, | |
| size_t *pcount, | |
| const char ***ppaths) | |
| { | |
| size_t formats_count; | |
| struct line_header_format *formats; | |
| size_t paths_count; | |
| const char **paths; | |
| size_t i; | |
| int ret; | |
| formats_count = read_byte (hdr_buf); | |
| if (formats_count == 0) | |
| formats = NULL; | |
| else | |
| { | |
| formats = ((struct line_header_format *) | |
| backtrace_alloc (state, | |
| (formats_count | |
| * sizeof (struct line_header_format)), | |
| hdr_buf->error_callback, | |
| hdr_buf->data)); | |
| if (formats == NULL) | |
| return 0; | |
| for (i = 0; i < formats_count; i++) | |
| { | |
| formats[i].lnct = (int) read_uleb128(hdr_buf); | |
| formats[i].form = (enum dwarf_form) read_uleb128 (hdr_buf); | |
| } | |
| } | |
| paths_count = read_uleb128 (hdr_buf); | |
| if (paths_count == 0) | |
| { | |
| *pcount = 0; | |
| *ppaths = NULL; | |
| ret = 1; | |
| goto exit; | |
| } | |
| paths = ((const char **) | |
| backtrace_alloc (state, paths_count * sizeof (const char *), | |
| hdr_buf->error_callback, hdr_buf->data)); | |
| if (paths == NULL) | |
| { | |
| ret = 0; | |
| goto exit; | |
| } | |
| for (i = 0; i < paths_count; i++) | |
| { | |
| if (!read_lnct (state, ddata, u, hdr_buf, hdr, formats_count, | |
| formats, &paths[i])) | |
| { | |
| backtrace_free (state, paths, | |
| paths_count * sizeof (const char *), | |
| hdr_buf->error_callback, hdr_buf->data); | |
| ret = 0; | |
| goto exit; | |
| } | |
| } | |
| *pcount = paths_count; | |
| *ppaths = paths; | |
| ret = 1; | |
| exit: | |
| if (formats != NULL) | |
| backtrace_free (state, formats, | |
| formats_count * sizeof (struct line_header_format), | |
| hdr_buf->error_callback, hdr_buf->data); | |
| return ret; | |
| } | |
| /* Read the line header. Return 1 on success, 0 on failure. */ | |
| static int | |
| read_line_header (struct backtrace_state *state, struct dwarf_data *ddata, | |
| struct unit *u, int is_dwarf64, struct dwarf_buf *line_buf, | |
| struct line_header *hdr) | |
| { | |
| uint64_t hdrlen; | |
| struct dwarf_buf hdr_buf; | |
| hdr->version = read_uint16 (line_buf); | |
| if (hdr->version < 2 || hdr->version > 5) | |
| { | |
| dwarf_buf_error (line_buf, "unsupported line number version", -1); | |
| return 0; | |
| } | |
| if (hdr->version < 5) | |
| hdr->addrsize = u->addrsize; | |
| else | |
| { | |
| hdr->addrsize = read_byte (line_buf); | |
| /* We could support a non-zero segment_selector_size but I doubt | |
| we'll ever see it. */ | |
| if (read_byte (line_buf) != 0) | |
| { | |
| dwarf_buf_error (line_buf, | |
| "non-zero segment_selector_size not supported", | |
| -1); | |
| return 0; | |
| } | |
| } | |
| hdrlen = read_offset (line_buf, is_dwarf64); | |
| hdr_buf = *line_buf; | |
| hdr_buf.left = hdrlen; | |
| if (!advance (line_buf, hdrlen)) | |
| return 0; | |
| hdr->min_insn_len = read_byte (&hdr_buf); | |
| if (hdr->version < 4) | |
| hdr->max_ops_per_insn = 1; | |
| else | |
| hdr->max_ops_per_insn = read_byte (&hdr_buf); | |
| /* We don't care about default_is_stmt. */ | |
| read_byte (&hdr_buf); | |
| hdr->line_base = read_sbyte (&hdr_buf); | |
| hdr->line_range = read_byte (&hdr_buf); | |
| hdr->opcode_base = read_byte (&hdr_buf); | |
| hdr->opcode_lengths = hdr_buf.buf; | |
| if (!advance (&hdr_buf, hdr->opcode_base - 1)) | |
| return 0; | |
| if (hdr->version < 5) | |
| { | |
| if (!read_v2_paths (state, u, &hdr_buf, hdr)) | |
| return 0; | |
| } | |
| else | |
| { | |
| if (!read_line_header_format_entries (state, ddata, u, &hdr_buf, hdr, | |
| &hdr->dirs_count, | |
| &hdr->dirs)) | |
| return 0; | |
| if (!read_line_header_format_entries (state, ddata, u, &hdr_buf, hdr, | |
| &hdr->filenames_count, | |
| &hdr->filenames)) | |
| return 0; | |
| } | |
| if (hdr_buf.reported_underflow) | |
| return 0; | |
| return 1; | |
| } | |
| /* Read the line program, adding line mappings to VEC. Return 1 on | |
| success, 0 on failure. */ | |
| static int | |
| read_line_program (struct backtrace_state *state, struct dwarf_data *ddata, | |
| const struct line_header *hdr, struct dwarf_buf *line_buf, | |
| struct line_vector *vec) | |
| { | |
| uint64_t address; | |
| unsigned int op_index; | |
| const char *reset_filename; | |
| const char *filename; | |
| int lineno; | |
| unsigned int disc; | |
| address = 0; | |
| op_index = 0; | |
| if (hdr->filenames_count > 1) | |
| reset_filename = hdr->filenames[1]; | |
| else | |
| reset_filename = ""; | |
| filename = reset_filename; | |
| lineno = 1; | |
| disc = 0; | |
| while (line_buf->left > 0) | |
| { | |
| unsigned int op; | |
| op = read_byte (line_buf); | |
| if (op >= hdr->opcode_base) | |
| { | |
| unsigned int advance; | |
| /* Special opcode. */ | |
| op -= hdr->opcode_base; | |
| advance = op / hdr->line_range; | |
| address += (hdr->min_insn_len * (op_index + advance) | |
| / hdr->max_ops_per_insn); | |
| op_index = (op_index + advance) % hdr->max_ops_per_insn; | |
| lineno += hdr->line_base + (int) (op % hdr->line_range); | |
| add_line (state, ddata, address, filename, lineno, disc, | |
| line_buf->error_callback, line_buf->data, vec); | |
| disc = 0; | |
| } | |
| else if (op == DW_LNS_extended_op) | |
| { | |
| uint64_t len; | |
| len = read_uleb128 (line_buf); | |
| op = read_byte (line_buf); | |
| switch (op) | |
| { | |
| case DW_LNE_end_sequence: | |
| /* FIXME: Should we mark the high PC here? It seems | |
| that we already have that information from the | |
| compilation unit. */ | |
| address = 0; | |
| op_index = 0; | |
| filename = reset_filename; | |
| lineno = 1; | |
| disc = 0; | |
| break; | |
| case DW_LNE_set_address: | |
| address = read_address (line_buf, hdr->addrsize); | |
| break; | |
| case DW_LNE_define_file: | |
| { | |
| const char *f; | |
| unsigned int dir_index; | |
| f = read_string (line_buf); | |
| if (f == NULL) | |
| return 0; | |
| dir_index = read_uleb128 (line_buf); | |
| /* Ignore that time and length. */ | |
| read_uleb128 (line_buf); | |
| read_uleb128 (line_buf); | |
| if (IS_ABSOLUTE_PATH (f)) | |
| filename = f; | |
| else | |
| { | |
| const char *dir; | |
| size_t dir_len; | |
| size_t f_len; | |
| char *p; | |
| if (dir_index < hdr->dirs_count) | |
| dir = hdr->dirs[dir_index]; | |
| else | |
| { | |
| dwarf_buf_error (line_buf, | |
| ("invalid directory index " | |
| "in line number program"), | |
| 0); | |
| return 0; | |
| } | |
| dir_len = strlen (dir); | |
| f_len = strlen (f); | |
| p = ((char *) | |
| backtrace_alloc (state, dir_len + f_len + 2, | |
| line_buf->error_callback, | |
| line_buf->data)); | |
| if (p == NULL) | |
| return 0; | |
| memcpy (p, dir, dir_len); | |
| /* FIXME: If we are on a DOS-based file system, | |
| and the directory or the file name use | |
| backslashes, then we should use a backslash | |
| here. */ | |
| p[dir_len] = '/'; | |
| memcpy (p + dir_len + 1, f, f_len + 1); | |
| filename = p; | |
| } | |
| } | |
| break; | |
| case DW_LNE_set_discriminator: | |
| disc = read_uleb128 (line_buf); | |
| break; | |
| default: | |
| if (!advance (line_buf, len - 1)) | |
| return 0; | |
| break; | |
| } | |
| } | |
| else | |
| { | |
| switch (op) | |
| { | |
| case DW_LNS_copy: | |
| add_line (state, ddata, address, filename, lineno, disc, | |
| line_buf->error_callback, line_buf->data, vec); | |
| disc = 0; | |
| break; | |
| case DW_LNS_advance_pc: | |
| { | |
| uint64_t advance; | |
| advance = read_uleb128 (line_buf); | |
| address += (hdr->min_insn_len * (op_index + advance) | |
| / hdr->max_ops_per_insn); | |
| op_index = (op_index + advance) % hdr->max_ops_per_insn; | |
| } | |
| break; | |
| case DW_LNS_advance_line: | |
| lineno += (int) read_sleb128 (line_buf); | |
| break; | |
| case DW_LNS_set_file: | |
| { | |
| uint64_t fileno; | |
| fileno = read_uleb128 (line_buf); | |
| if (fileno >= hdr->filenames_count) | |
| { | |
| dwarf_buf_error (line_buf, | |
| ("invalid file number in " | |
| "line number program"), | |
| 0); | |
| return 0; | |
| } | |
| filename = hdr->filenames[fileno]; | |
| } | |
| break; | |
| case DW_LNS_set_column: | |
| read_uleb128 (line_buf); | |
| break; | |
| case DW_LNS_negate_stmt: | |
| break; | |
| case DW_LNS_set_basic_block: | |
| break; | |
| case DW_LNS_const_add_pc: | |
| { | |
| unsigned int advance; | |
| op = 255 - hdr->opcode_base; | |
| advance = op / hdr->line_range; | |
| address += (hdr->min_insn_len * (op_index + advance) | |
| / hdr->max_ops_per_insn); | |
| op_index = (op_index + advance) % hdr->max_ops_per_insn; | |
| } | |
| break; | |
| case DW_LNS_fixed_advance_pc: | |
| address += read_uint16 (line_buf); | |
| op_index = 0; | |
| break; | |
| case DW_LNS_set_prologue_end: | |
| break; | |
| case DW_LNS_set_epilogue_begin: | |
| break; | |
| case DW_LNS_set_isa: | |
| read_uleb128 (line_buf); | |
| break; | |
| default: | |
| { | |
| unsigned int i; | |
| for (i = hdr->opcode_lengths[op - 1]; i > 0; --i) | |
| read_uleb128 (line_buf); | |
| } | |
| break; | |
| } | |
| } | |
| } | |
| return 1; | |
| } | |
| /* Read the line number information for a compilation unit. Returns 1 | |
| on success, 0 on failure. */ | |
| static int | |
| read_line_info (struct backtrace_state *state, struct dwarf_data *ddata, | |
| backtrace_error_callback error_callback, void *data, | |
| struct unit *u, struct line_header *hdr, struct line **lines, | |
| size_t *lines_count) | |
| { | |
| struct line_vector vec; | |
| struct dwarf_buf line_buf; | |
| uint64_t len; | |
| int is_dwarf64; | |
| struct line *ln; | |
| memset (&vec.vec, 0, sizeof vec.vec); | |
| vec.count = 0; | |
| memset (hdr, 0, sizeof *hdr); | |
| if (u->lineoff != (off_t) (size_t) u->lineoff | |
| || (size_t) u->lineoff >= ddata->dwarf_sections.size[DEBUG_LINE]) | |
| { | |
| error_callback (data, "unit line offset out of range", 0); | |
| goto fail; | |
| } | |
| line_buf.name = ".debug_line"; | |
| line_buf.start = ddata->dwarf_sections.data[DEBUG_LINE]; | |
| line_buf.buf = ddata->dwarf_sections.data[DEBUG_LINE] + u->lineoff; | |
| line_buf.left = ddata->dwarf_sections.size[DEBUG_LINE] - u->lineoff; | |
| line_buf.is_bigendian = ddata->is_bigendian; | |
| line_buf.error_callback = error_callback; | |
| line_buf.data = data; | |
| line_buf.reported_underflow = 0; | |
| len = read_initial_length (&line_buf, &is_dwarf64); | |
| line_buf.left = len; | |
| if (!read_line_header (state, ddata, u, is_dwarf64, &line_buf, hdr)) | |
| goto fail; | |
| if (!read_line_program (state, ddata, hdr, &line_buf, &vec)) | |
| goto fail; | |
| if (line_buf.reported_underflow) | |
| goto fail; | |
| if (vec.count == 0) | |
| { | |
| /* This is not a failure in the sense of generating an error, | |
| but it is a failure in that sense that we have no useful | |
| information. */ | |
| goto fail; | |
| } | |
| /* Allocate one extra entry at the end. */ | |
| ln = ((struct line *) | |
| backtrace_vector_grow (state, sizeof (struct line), error_callback, | |
| data, &vec.vec)); | |
| if (ln == NULL) | |
| goto fail; | |
| ln->pc = (uintptr_t) -1; | |
| ln->filename = NULL; | |
| ln->lineno = 0; | |
| ln->disc = 0; | |
| ln->idx = 0; | |
| if (!backtrace_vector_release (state, &vec.vec, error_callback, data)) | |
| goto fail; | |
| ln = (struct line *) vec.vec.base; | |
| backtrace_qsort (ln, vec.count, sizeof (struct line), line_compare); | |
| *lines = ln; | |
| *lines_count = vec.count; | |
| return 1; | |
| fail: | |
| backtrace_vector_free (state, &vec.vec, error_callback, data); | |
| free_line_header (state, hdr, error_callback, data); | |
| *lines = (struct line *) (uintptr_t) -1; | |
| *lines_count = 0; | |
| return 0; | |
| } | |
| static const char *read_referenced_name (struct dwarf_data *, struct unit *, | |
| uint64_t, backtrace_error_callback, | |
| void *, int *); | |
| /* Read the name of a function from a DIE referenced by ATTR with VAL. | |
| This sets *DECL_LINENO to the decl_line attribute of the DIE if | |
| available. */ | |
| static const char * | |
| read_referenced_name_from_attr (struct dwarf_data *ddata, struct unit *u, | |
| struct attr *attr, struct attr_val *val, | |
| backtrace_error_callback error_callback, | |
| void *data, int *decl_lineno) | |
| { | |
| switch (attr->name) | |
| { | |
| case DW_AT_abstract_origin: | |
| case DW_AT_specification: | |
| break; | |
| default: | |
| return NULL; | |
| } | |
| if (attr->form == DW_FORM_ref_sig8) | |
| return NULL; | |
| if (val->encoding == ATTR_VAL_REF_INFO) | |
| { | |
| struct unit *unit | |
| = find_unit (ddata->units, ddata->units_count, | |
| val->u.uint); | |
| if (unit == NULL) | |
| return NULL; | |
| uint64_t offset = val->u.uint - unit->low_offset; | |
| return read_referenced_name (ddata, unit, offset, error_callback, data, | |
| decl_lineno); | |
| } | |
| if (val->encoding == ATTR_VAL_UINT | |
| || val->encoding == ATTR_VAL_REF_UNIT) | |
| return read_referenced_name (ddata, u, val->u.uint, error_callback, data, | |
| decl_lineno); | |
| if (val->encoding == ATTR_VAL_REF_ALT_INFO) | |
| { | |
| struct unit *alt_unit | |
| = find_unit (ddata->altlink->units, ddata->altlink->units_count, | |
| val->u.uint); | |
| if (alt_unit == NULL) | |
| return NULL; | |
| uint64_t offset = val->u.uint - alt_unit->low_offset; | |
| return read_referenced_name (ddata->altlink, alt_unit, offset, | |
| error_callback, data, decl_lineno); | |
| } | |
| return NULL; | |
| } | |
| /* Read the name of a function from a DIE referenced by a | |
| DW_AT_abstract_origin or DW_AT_specification tag. OFFSET is within | |
| the same compilation unit. This sets *DECL_LINENO to the function's | |
| decl_line attribute if available. */ | |
| static const char * | |
| read_referenced_name (struct dwarf_data *ddata, struct unit *u, | |
| uint64_t offset, backtrace_error_callback error_callback, | |
| void *data, int *decl_lineno) | |
| { | |
| struct dwarf_buf unit_buf; | |
| uint64_t code; | |
| const struct abbrev *abbrev; | |
| const char *ret; | |
| size_t i; | |
| /* OFFSET is from the start of the data for this compilation unit. | |
| U->unit_data is the data, but it starts U->unit_data_offset bytes | |
| from the beginning. */ | |
| if (offset < u->unit_data_offset | |
| || offset - u->unit_data_offset >= u->unit_data_len) | |
| { | |
| error_callback (data, | |
| "abstract origin or specification out of range", | |
| 0); | |
| return NULL; | |
| } | |
| offset -= u->unit_data_offset; | |
| unit_buf.name = ".debug_info"; | |
| unit_buf.start = ddata->dwarf_sections.data[DEBUG_INFO]; | |
| unit_buf.buf = u->unit_data + offset; | |
| unit_buf.left = u->unit_data_len - offset; | |
| unit_buf.is_bigendian = ddata->is_bigendian; | |
| unit_buf.error_callback = error_callback; | |
| unit_buf.data = data; | |
| unit_buf.reported_underflow = 0; | |
| code = read_uleb128 (&unit_buf); | |
| if (code == 0) | |
| { | |
| dwarf_buf_error (&unit_buf, | |
| "invalid abstract origin or specification", | |
| 0); | |
| return NULL; | |
| } | |
| abbrev = lookup_abbrev (&u->abbrevs, code, error_callback, data); | |
| if (abbrev == NULL) | |
| return NULL; | |
| ret = NULL; | |
| for (i = 0; i < abbrev->num_attrs; ++i) | |
| { | |
| struct attr_val val; | |
| if (!read_attribute (abbrev->attrs[i].form, abbrev->attrs[i].val, | |
| &unit_buf, u->is_dwarf64, u->version, u->addrsize, | |
| &ddata->dwarf_sections, ddata->altlink, &val)) | |
| return NULL; | |
| switch (abbrev->attrs[i].name) | |
| { | |
| case DW_AT_name: | |
| /* Third name preference: don't override. A name we found in some | |
| other way, will normally be more useful -- e.g., this name is | |
| normally not mangled. */ | |
| if (ret != NULL) | |
| break; | |
| if (!resolve_string (&ddata->dwarf_sections, u->is_dwarf64, | |
| ddata->is_bigendian, u->str_offsets_base, | |
| &val, error_callback, data, &ret)) | |
| return NULL; | |
| break; | |
| case DW_AT_linkage_name: | |
| case DW_AT_MIPS_linkage_name: | |
| /* First name preference: override all. */ | |
| { | |
| const char *s; | |
| s = NULL; | |
| if (!resolve_string (&ddata->dwarf_sections, u->is_dwarf64, | |
| ddata->is_bigendian, u->str_offsets_base, | |
| &val, error_callback, data, &s)) | |
| return NULL; | |
| if (s != NULL) | |
| return s; | |
| } | |
| break; | |
| case DW_AT_specification: | |
| /* Second name preference: override DW_AT_name, don't override | |
| DW_AT_linkage_name. */ | |
| { | |
| const char *name; | |
| name = read_referenced_name_from_attr (ddata, u, &abbrev->attrs[i], | |
| &val, error_callback, data, | |
| decl_lineno); | |
| if (name != NULL) | |
| ret = name; | |
| } | |
| break; | |
| case DW_AT_decl_line: | |
| if (val.encoding == ATTR_VAL_UINT) | |
| *decl_lineno = (int) val.u.uint; | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| return ret; | |
| } | |
| /* Add a range to a unit that maps to a function. This is called via | |
| add_ranges. Returns 1 on success, 0 on error. */ | |
| static int | |
| add_function_range (struct backtrace_state *state, void *rdata, | |
| uintptr_t lowpc, uintptr_t highpc, | |
| backtrace_error_callback error_callback, void *data, | |
| void *pvec) | |
| { | |
| struct function *function = (struct function *) rdata; | |
| struct function_vector *vec = (struct function_vector *) pvec; | |
| struct function_addrs *p; | |
| if (vec->count > 0) | |
| { | |
| p = (struct function_addrs *) vec->vec.base + (vec->count - 1); | |
| if ((lowpc == p->high || lowpc == p->high + 1) | |
| && function == p->function) | |
| { | |
| if (highpc > p->high) | |
| p->high = highpc; | |
| return 1; | |
| } | |
| } | |
| p = ((struct function_addrs *) | |
| backtrace_vector_grow (state, sizeof (struct function_addrs), | |
| error_callback, data, &vec->vec)); | |
| if (p == NULL) | |
| return 0; | |
| p->low = lowpc; | |
| p->high = highpc; | |
| p->function = function; | |
| ++vec->count; | |
| return 1; | |
| } | |
| /* Read one entry plus all its children. Add function addresses to | |
| VEC. Returns 1 on success, 0 on error. */ | |
| static int | |
| read_function_entry (struct backtrace_state *state, struct dwarf_data *ddata, | |
| struct unit *u, uintptr_t base, struct dwarf_buf *unit_buf, | |
| const struct line_header *lhdr, | |
| backtrace_error_callback error_callback, void *data, | |
| struct function_vector *vec_function, | |
| struct function_vector *vec_inlined) | |
| { | |
| while (unit_buf->left > 0) | |
| { | |
| uint64_t code; | |
| const struct abbrev *abbrev; | |
| int is_function; | |
| struct function *function; | |
| struct function_vector *vec; | |
| size_t i; | |
| struct pcrange pcrange; | |
| int have_linkage_name; | |
| code = read_uleb128 (unit_buf); | |
| if (code == 0) | |
| return 1; | |
| abbrev = lookup_abbrev (&u->abbrevs, code, error_callback, data); | |
| if (abbrev == NULL) | |
| return 0; | |
| is_function = (abbrev->tag == DW_TAG_subprogram | |
| || abbrev->tag == DW_TAG_entry_point | |
| || abbrev->tag == DW_TAG_inlined_subroutine); | |
| if (abbrev->tag == DW_TAG_inlined_subroutine) | |
| vec = vec_inlined; | |
| else | |
| vec = vec_function; | |
| function = NULL; | |
| if (is_function) | |
| { | |
| function = ((struct function *) | |
| backtrace_alloc (state, sizeof *function, | |
| error_callback, data)); | |
| if (function == NULL) | |
| return 0; | |
| memset (function, 0, sizeof *function); | |
| } | |
| memset (&pcrange, 0, sizeof pcrange); | |
| have_linkage_name = 0; | |
| for (i = 0; i < abbrev->num_attrs; ++i) | |
| { | |
| struct attr_val val; | |
| if (!read_attribute (abbrev->attrs[i].form, abbrev->attrs[i].val, | |
| unit_buf, u->is_dwarf64, u->version, | |
| u->addrsize, &ddata->dwarf_sections, | |
| ddata->altlink, &val)) | |
| return 0; | |
| /* The compile unit sets the base address for any address | |
| ranges in the function entries. */ | |
| if ((abbrev->tag == DW_TAG_compile_unit | |
| || abbrev->tag == DW_TAG_skeleton_unit) | |
| && abbrev->attrs[i].name == DW_AT_low_pc) | |
| { | |
| if (val.encoding == ATTR_VAL_ADDRESS) | |
| base = (uintptr_t) val.u.uint; | |
| else if (val.encoding == ATTR_VAL_ADDRESS_INDEX) | |
| { | |
| if (!resolve_addr_index (&ddata->dwarf_sections, | |
| u->addr_base, u->addrsize, | |
| ddata->is_bigendian, val.u.uint, | |
| error_callback, data, &base)) | |
| return 0; | |
| } | |
| } | |
| if (is_function) | |
| { | |
| switch (abbrev->attrs[i].name) | |
| { | |
| case DW_AT_call_file: | |
| if (val.encoding == ATTR_VAL_UINT) | |
| { | |
| if (val.u.uint >= lhdr->filenames_count) | |
| { | |
| dwarf_buf_error (unit_buf, | |
| ("invalid file number in " | |
| "DW_AT_call_file attribute"), | |
| 0); | |
| return 0; | |
| } | |
| function->caller_filename = lhdr->filenames[val.u.uint]; | |
| } | |
| break; | |
| case DW_AT_GNU_discriminator: | |
| if (val.encoding == ATTR_VAL_UINT) | |
| function->caller_disc = val.u.uint; | |
| break; | |
| case DW_AT_decl_line: | |
| if (val.encoding == ATTR_VAL_UINT) | |
| function->decl_lineno = (int) val.u.uint; | |
| break; | |
| case DW_AT_call_line: | |
| if (val.encoding == ATTR_VAL_UINT) | |
| function->caller_lineno = val.u.uint; | |
| break; | |
| case DW_AT_abstract_origin: | |
| case DW_AT_specification: | |
| /* Second name preference: override DW_AT_name, don't override | |
| DW_AT_linkage_name. */ | |
| if (have_linkage_name) | |
| break; | |
| { | |
| const char *name; | |
| name | |
| = read_referenced_name_from_attr (ddata, u, | |
| &abbrev->attrs[i], &val, | |
| error_callback, data, | |
| &function->decl_lineno); | |
| if (name != NULL) | |
| function->name = name; | |
| } | |
| break; | |
| case DW_AT_name: | |
| /* Third name preference: don't override. */ | |
| if (function->name != NULL) | |
| break; | |
| if (!resolve_string (&ddata->dwarf_sections, u->is_dwarf64, | |
| ddata->is_bigendian, | |
| u->str_offsets_base, &val, | |
| error_callback, data, &function->name)) | |
| return 0; | |
| break; | |
| case DW_AT_linkage_name: | |
| case DW_AT_MIPS_linkage_name: | |
| /* First name preference: override all. */ | |
| { | |
| const char *s; | |
| s = NULL; | |
| if (!resolve_string (&ddata->dwarf_sections, u->is_dwarf64, | |
| ddata->is_bigendian, | |
| u->str_offsets_base, &val, | |
| error_callback, data, &s)) | |
| return 0; | |
| if (s != NULL) | |
| { | |
| function->name = s; | |
| have_linkage_name = 1; | |
| } | |
| } | |
| break; | |
| case DW_AT_low_pc: case DW_AT_high_pc: case DW_AT_ranges: | |
| update_pcrange (&abbrev->attrs[i], &val, &pcrange); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| } | |
| /* If we couldn't find a name for the function, we have no use | |
| for it. */ | |
| if (is_function && function->name == NULL) | |
| { | |
| backtrace_free (state, function, sizeof *function, | |
| error_callback, data); | |
| is_function = 0; | |
| } | |
| if (is_function) | |
| { | |
| if (pcrange.have_ranges | |
| || (pcrange.have_lowpc && pcrange.have_highpc)) | |
| { | |
| if (!add_ranges (state, &ddata->dwarf_sections, | |
| ddata->base_address, ddata->is_bigendian, | |
| u, base, &pcrange, add_function_range, | |
| (void *) function, error_callback, data, | |
| (void *) vec)) | |
| return 0; | |
| } | |
| else | |
| { | |
| backtrace_free (state, function, sizeof *function, | |
| error_callback, data); | |
| is_function = 0; | |
| } | |
| } | |
| if (abbrev->has_children) | |
| { | |
| if (!is_function) | |
| { | |
| if (!read_function_entry (state, ddata, u, base, unit_buf, lhdr, | |
| error_callback, data, vec_function, | |
| vec_inlined)) | |
| return 0; | |
| } | |
| else | |
| { | |
| struct function_vector fvec; | |
| /* Gather any information for inlined functions in | |
| FVEC. */ | |
| memset (&fvec, 0, sizeof fvec); | |
| if (!read_function_entry (state, ddata, u, base, unit_buf, lhdr, | |
| error_callback, data, vec_function, | |
| &fvec)) | |
| return 0; | |
| if (fvec.count > 0) | |
| { | |
| struct function_addrs *p; | |
| struct function_addrs *faddrs; | |
| /* Allocate a trailing entry, but don't include it | |
| in fvec.count. */ | |
| p = ((struct function_addrs *) | |
| backtrace_vector_grow (state, | |
| sizeof (struct function_addrs), | |
| error_callback, data, | |
| &fvec.vec)); | |
| if (p == NULL) | |
| return 0; | |
| p->low = 0; | |
| --p->low; | |
| p->high = p->low; | |
| p->function = NULL; | |
| if (!backtrace_vector_release (state, &fvec.vec, | |
| error_callback, data)) | |
| return 0; | |
| faddrs = (struct function_addrs *) fvec.vec.base; | |
| backtrace_qsort (faddrs, fvec.count, | |
| sizeof (struct function_addrs), | |
| function_addrs_compare); | |
| function->function_addrs = faddrs; | |
| function->function_addrs_count = fvec.count; | |
| } | |
| } | |
| } | |
| } | |
| return 1; | |
| } | |
| /* Read function name information for a compilation unit. We look | |
| through the whole unit looking for function tags. */ | |
| static void | |
| read_function_info (struct backtrace_state *state, struct dwarf_data *ddata, | |
| const struct line_header *lhdr, | |
| backtrace_error_callback error_callback, void *data, | |
| struct unit *u, struct function_vector *fvec, | |
| struct function_addrs **ret_addrs, | |
| size_t *ret_addrs_count) | |
| { | |
| struct function_vector lvec; | |
| struct function_vector *pfvec; | |
| struct dwarf_buf unit_buf; | |
| struct function_addrs *p; | |
| struct function_addrs *addrs; | |
| size_t addrs_count; | |
| /* Use FVEC if it is not NULL. Otherwise use our own vector. */ | |
| if (fvec != NULL) | |
| pfvec = fvec; | |
| else | |
| { | |
| memset (&lvec, 0, sizeof lvec); | |
| pfvec = &lvec; | |
| } | |
| unit_buf.name = ".debug_info"; | |
| unit_buf.start = ddata->dwarf_sections.data[DEBUG_INFO]; | |
| unit_buf.buf = u->unit_data; | |
| unit_buf.left = u->unit_data_len; | |
| unit_buf.is_bigendian = ddata->is_bigendian; | |
| unit_buf.error_callback = error_callback; | |
| unit_buf.data = data; | |
| unit_buf.reported_underflow = 0; | |
| while (unit_buf.left > 0) | |
| { | |
| if (!read_function_entry (state, ddata, u, 0, &unit_buf, lhdr, | |
| error_callback, data, pfvec, pfvec)) | |
| return; | |
| } | |
| if (pfvec->count == 0) | |
| return; | |
| /* Allocate a trailing entry, but don't include it in | |
| pfvec->count. */ | |
| p = ((struct function_addrs *) | |
| backtrace_vector_grow (state, sizeof (struct function_addrs), | |
| error_callback, data, &pfvec->vec)); | |
| if (p == NULL) | |
| return; | |
| p->low = 0; | |
| --p->low; | |
| p->high = p->low; | |
| p->function = NULL; | |
| addrs_count = pfvec->count; | |
| if (fvec == NULL) | |
| { | |
| if (!backtrace_vector_release (state, &lvec.vec, error_callback, data)) | |
| return; | |
| addrs = (struct function_addrs *) pfvec->vec.base; | |
| } | |
| else | |
| { | |
| /* Finish this list of addresses, but leave the remaining space in | |
| the vector available for the next function unit. */ | |
| addrs = ((struct function_addrs *) | |
| backtrace_vector_finish (state, &fvec->vec, | |
| error_callback, data)); | |
| if (addrs == NULL) | |
| return; | |
| fvec->count = 0; | |
| } | |
| backtrace_qsort (addrs, addrs_count, sizeof (struct function_addrs), | |
| function_addrs_compare); | |
| *ret_addrs = addrs; | |
| *ret_addrs_count = addrs_count; | |
| } | |
| /* See if PC is inlined in FUNCTION. If it is, print out the inlined | |
| information, and update FILENAME, LINENO, DISC, and DECL_LINENO for | |
| the caller. Returns whatever CALLBACK returns, or 0 to keep | |
| going. */ | |
| static int | |
| report_inlined_functions (struct backtrace_state *state, uintptr_t pc, | |
| struct function *function, | |
| backtrace_full_callback callback, void *data, | |
| const char **filename, int *lineno, | |
| unsigned int *disc, | |
| int *decl_lineno) | |
| { | |
| struct function_addrs *p; | |
| struct function_addrs *match; | |
| struct function *inlined; | |
| int ret; | |
| if (function->function_addrs_count == 0) | |
| return 0; | |
| /* Our search isn't safe if pc == -1, as that is the sentinel | |
| value. */ | |
| if (pc + 1 == 0) | |
| return 0; | |
| p = ((struct function_addrs *) | |
| bsearch (&pc, function->function_addrs, | |
| function->function_addrs_count, | |
| sizeof (struct function_addrs), | |
| function_addrs_search)); | |
| if (p == NULL) | |
| return 0; | |
| /* Here pc >= p->low && pc < (p + 1)->low. The function_addrs are | |
| sorted by low, so if pc > p->low we are at the end of a range of | |
| function_addrs with the same low value. If pc == p->low walk | |
| forward to the end of the range with that low value. Then walk | |
| backward and use the first range that includes pc. */ | |
| while (pc == (p + 1)->low) | |
| ++p; | |
| match = NULL; | |
| while (1) | |
| { | |
| if (pc < p->high) | |
| { | |
| match = p; | |
| break; | |
| } | |
| if (p == function->function_addrs) | |
| break; | |
| if ((p - 1)->low < p->low) | |
| break; | |
| --p; | |
| } | |
| if (match == NULL) | |
| return 0; | |
| /* We found an inlined call. */ | |
| inlined = match->function; | |
| /* Report any calls inlined into this one. */ | |
| ret = report_inlined_functions (state, pc, inlined, callback, data, | |
| filename, lineno, disc, decl_lineno); | |
| if (ret != 0) | |
| return ret; | |
| /* Report this inlined call. */ | |
| ret = call_callback (state, callback, data, pc, *filename, *lineno, | |
| inlined->name, *disc, *decl_lineno); | |
| if (ret != 0) | |
| return ret; | |
| /* Our caller will report the caller of the inlined function; tell | |
| it the appropriate filename, line number, and discriminator. */ | |
| *filename = inlined->caller_filename; | |
| *lineno = inlined->caller_lineno; | |
| *disc = inlined->caller_disc; | |
| *decl_lineno = inlined->decl_lineno; | |
| return 0; | |
| } | |
| /* Look for a PC in the DWARF mapping for one module. On success, | |
| call CALLBACK and return whatever it returns. On error, call | |
| ERROR_CALLBACK and return 0. Sets *FOUND to 1 if the PC is found, | |
| 0 if not. */ | |
| static int | |
| dwarf_lookup_pc (struct backtrace_state *state, struct dwarf_data *ddata, | |
| uintptr_t pc, backtrace_full_callback callback, | |
| backtrace_error_callback error_callback, void *data, | |
| int *found) | |
| { | |
| struct unit_addrs *entry; | |
| int found_entry; | |
| struct unit *u; | |
| int new_data; | |
| struct line *lines; | |
| struct line *ln; | |
| struct function_addrs *p; | |
| struct function_addrs *fmatch; | |
| struct function *function; | |
| const char *filename; | |
| int lineno; | |
| unsigned int disc; | |
| int decl_lineno; | |
| int ret; | |
| *found = 1; | |
| /* Find an address range that includes PC. Our search isn't safe if | |
| PC == -1, as we use that as a sentinel value, so skip the search | |
| in that case. */ | |
| entry = (ddata->addrs_count == 0 || pc + 1 == 0 | |
| ? NULL | |
| : bsearch (&pc, ddata->addrs, ddata->addrs_count, | |
| sizeof (struct unit_addrs), unit_addrs_search)); | |
| if (entry == NULL) | |
| { | |
| *found = 0; | |
| return 0; | |
| } | |
| /* Here pc >= entry->low && pc < (entry + 1)->low. The unit_addrs | |
| are sorted by low, so if pc > p->low we are at the end of a range | |
| of unit_addrs with the same low value. If pc == p->low walk | |
| forward to the end of the range with that low value. Then walk | |
| backward and use the first range that includes pc. */ | |
| while (pc == (entry + 1)->low) | |
| ++entry; | |
| found_entry = 0; | |
| while (1) | |
| { | |
| if (pc < entry->high) | |
| { | |
| found_entry = 1; | |
| break; | |
| } | |
| if (entry == ddata->addrs) | |
| break; | |
| if ((entry - 1)->low < entry->low) | |
| break; | |
| --entry; | |
| } | |
| if (!found_entry) | |
| { | |
| *found = 0; | |
| return 0; | |
| } | |
| /* We need the lines, lines_count, function_addrs, | |
| function_addrs_count fields of u. If they are not set, we need | |
| to set them. When running in threaded mode, we need to allow for | |
| the possibility that some other thread is setting them | |
| simultaneously. */ | |
| u = entry->u; | |
| lines = u->lines; | |
| /* Skip units with no useful line number information by walking | |
| backward. Useless line number information is marked by setting | |
| lines == -1. */ | |
| while (entry > ddata->addrs | |
| && pc >= (entry - 1)->low | |
| && pc < (entry - 1)->high) | |
| { | |
| if (state->threaded) | |
| lines = (struct line *) backtrace_atomic_load_pointer (&u->lines); | |
| if (lines != (struct line *) (uintptr_t) -1) | |
| break; | |
| --entry; | |
| u = entry->u; | |
| lines = u->lines; | |
| } | |
| if (state->threaded) | |
| lines = backtrace_atomic_load_pointer (&u->lines); | |
| new_data = 0; | |
| if (lines == NULL) | |
| { | |
| struct function_addrs *function_addrs; | |
| size_t function_addrs_count; | |
| struct line_header lhdr; | |
| size_t count; | |
| /* We have never read the line information for this unit. Read | |
| it now. */ | |
| function_addrs = NULL; | |
| function_addrs_count = 0; | |
| if (read_line_info (state, ddata, error_callback, data, entry->u, &lhdr, | |
| &lines, &count)) | |
| { | |
| struct function_vector *pfvec; | |
| /* If not threaded, reuse DDATA->FVEC for better memory | |
| consumption. */ | |
| if (state->threaded) | |
| pfvec = NULL; | |
| else | |
| pfvec = &ddata->fvec; | |
| read_function_info (state, ddata, &lhdr, error_callback, data, | |
| entry->u, pfvec, &function_addrs, | |
| &function_addrs_count); | |
| free_line_header (state, &lhdr, error_callback, data); | |
| new_data = 1; | |
| } | |
| /* Atomically store the information we just read into the unit. | |
| If another thread is simultaneously writing, it presumably | |
| read the same information, and we don't care which one we | |
| wind up with; we just leak the other one. We do have to | |
| write the lines field last, so that the acquire-loads above | |
| ensure that the other fields are set. */ | |
| if (!state->threaded) | |
| { | |
| u->lines_count = count; | |
| u->function_addrs = function_addrs; | |
| u->function_addrs_count = function_addrs_count; | |
| u->lines = lines; | |
| } | |
| else | |
| { | |
| backtrace_atomic_store_size_t (&u->lines_count, count); | |
| backtrace_atomic_store_pointer (&u->function_addrs, function_addrs); | |
| backtrace_atomic_store_size_t (&u->function_addrs_count, | |
| function_addrs_count); | |
| backtrace_atomic_store_pointer (&u->lines, lines); | |
| } | |
| } | |
| /* Now all fields of U have been initialized. */ | |
| if (lines == (struct line *) (uintptr_t) -1) | |
| { | |
| /* If reading the line number information failed in some way, | |
| try again to see if there is a better compilation unit for | |
| this PC. */ | |
| if (new_data) | |
| return dwarf_lookup_pc (state, ddata, pc, callback, error_callback, | |
| data, found); | |
| return call_callback (state, callback, data, pc, NULL, 0, NULL, 0, 0); | |
| } | |
| /* Search for PC within this unit. */ | |
| ln = (struct line *) bsearch (&pc, lines, entry->u->lines_count, | |
| sizeof (struct line), line_search); | |
| if (ln == NULL) | |
| { | |
| /* The PC is between the low_pc and high_pc attributes of the | |
| compilation unit, but no entry in the line table covers it. | |
| This implies that the start of the compilation unit has no | |
| line number information. */ | |
| if (entry->u->abs_filename == NULL) | |
| { | |
| const char *filename; | |
| filename = entry->u->filename; | |
| if (filename != NULL | |
| && !IS_ABSOLUTE_PATH (filename) | |
| && entry->u->comp_dir != NULL) | |
| { | |
| size_t filename_len; | |
| const char *dir; | |
| size_t dir_len; | |
| char *s; | |
| filename_len = strlen (filename); | |
| dir = entry->u->comp_dir; | |
| dir_len = strlen (dir); | |
| s = (char *) backtrace_alloc (state, dir_len + filename_len + 2, | |
| error_callback, data); | |
| if (s == NULL) | |
| { | |
| *found = 0; | |
| return 0; | |
| } | |
| memcpy (s, dir, dir_len); | |
| /* FIXME: Should use backslash if DOS file system. */ | |
| s[dir_len] = '/'; | |
| memcpy (s + dir_len + 1, filename, filename_len + 1); | |
| filename = s; | |
| } | |
| entry->u->abs_filename = filename; | |
| } | |
| return call_callback (state, callback, data, pc, entry->u->abs_filename, | |
| 0, NULL, 0, 0); | |
| } | |
| /* Search for function name within this unit. */ | |
| if (entry->u->function_addrs_count == 0) | |
| return call_callback (state, callback, data, pc, ln->filename, ln->lineno, | |
| NULL, ln->disc, 0); | |
| p = ((struct function_addrs *) | |
| bsearch (&pc, entry->u->function_addrs, | |
| entry->u->function_addrs_count, | |
| sizeof (struct function_addrs), | |
| function_addrs_search)); | |
| if (p == NULL) | |
| return call_callback (state, callback, data, pc, ln->filename, ln->lineno, | |
| NULL, ln->disc, 0); | |
| /* Here pc >= p->low && pc < (p + 1)->low. The function_addrs are | |
| sorted by low, so if pc > p->low we are at the end of a range of | |
| function_addrs with the same low value. If pc == p->low walk | |
| forward to the end of the range with that low value. Then walk | |
| backward and use the first range that includes pc. */ | |
| while (pc == (p + 1)->low) | |
| ++p; | |
| fmatch = NULL; | |
| while (1) | |
| { | |
| if (pc < p->high) | |
| { | |
| fmatch = p; | |
| break; | |
| } | |
| if (p == entry->u->function_addrs) | |
| break; | |
| if ((p - 1)->low < p->low) | |
| break; | |
| --p; | |
| } | |
| if (fmatch == NULL) | |
| return call_callback (state, callback, data, pc, ln->filename, ln->lineno, | |
| NULL, ln->disc, 0); | |
| function = fmatch->function; | |
| filename = ln->filename; | |
| lineno = ln->lineno; | |
| disc = ln->disc; | |
| decl_lineno = function->decl_lineno; | |
| ret = report_inlined_functions (state, pc, function, callback, data, | |
| &filename, &lineno, &disc, &decl_lineno); | |
| if (ret != 0) | |
| return ret; | |
| return call_callback (state, callback, data, pc, filename, lineno, | |
| function->name, disc, decl_lineno); | |
| } | |
| /* Return the file/line information for a PC using the DWARF mapping | |
| we built earlier. */ | |
| static int | |
| dwarf_fileline (struct backtrace_state *state, uintptr_t pc, | |
| backtrace_full_callback callback, | |
| backtrace_error_callback error_callback, void *data) | |
| { | |
| struct dwarf_data *ddata; | |
| int found; | |
| int ret; | |
| if (!state->threaded) | |
| { | |
| for (ddata = (struct dwarf_data *) state->fileline_data; | |
| ddata != NULL; | |
| ddata = ddata->next) | |
| { | |
| ret = dwarf_lookup_pc (state, ddata, pc, callback, error_callback, | |
| data, &found); | |
| if (ret != 0 || found) | |
| return ret; | |
| } | |
| } | |
| else | |
| { | |
| struct dwarf_data **pp; | |
| pp = (struct dwarf_data **) (void *) &state->fileline_data; | |
| while (1) | |
| { | |
| ddata = backtrace_atomic_load_pointer (pp); | |
| if (ddata == NULL) | |
| break; | |
| ret = dwarf_lookup_pc (state, ddata, pc, callback, error_callback, | |
| data, &found); | |
| if (ret != 0 || found) | |
| return ret; | |
| pp = &ddata->next; | |
| } | |
| } | |
| /* FIXME: See if any libraries have been dlopen'ed. */ | |
| return call_callback (state, callback, data, pc, NULL, 0, NULL, 0, 0); | |
| } | |
| /* Initialize our data structures from the DWARF debug info for a | |
| file. Return NULL on failure. */ | |
| static struct dwarf_data * | |
| build_dwarf_data (struct backtrace_state *state, | |
| struct libbacktrace_base_address base_address, | |
| const struct dwarf_sections *dwarf_sections, | |
| int is_bigendian, | |
| struct dwarf_data *altlink, | |
| backtrace_error_callback error_callback, | |
| void *data) | |
| { | |
| struct unit_addrs_vector addrs_vec; | |
| struct unit_vector units_vec; | |
| struct dwarf_data *fdata; | |
| if (!build_address_map (state, base_address, dwarf_sections, is_bigendian, | |
| altlink, error_callback, data, &addrs_vec, | |
| &units_vec)) | |
| return NULL; | |
| if (!backtrace_vector_release (state, &addrs_vec.vec, error_callback, data)) | |
| return NULL; | |
| if (!backtrace_vector_release (state, &units_vec.vec, error_callback, data)) | |
| return NULL; | |
| backtrace_qsort ((struct unit_addrs *) addrs_vec.vec.base, addrs_vec.count, | |
| sizeof (struct unit_addrs), unit_addrs_compare); | |
| if (!resolve_unit_addrs_overlap (state, error_callback, data, &addrs_vec)) | |
| return NULL; | |
| /* No qsort for units required, already sorted. */ | |
| fdata = ((struct dwarf_data *) | |
| backtrace_alloc (state, sizeof (struct dwarf_data), | |
| error_callback, data)); | |
| if (fdata == NULL) | |
| return NULL; | |
| fdata->next = NULL; | |
| fdata->altlink = altlink; | |
| fdata->base_address = base_address; | |
| fdata->addrs = (struct unit_addrs *) addrs_vec.vec.base; | |
| fdata->addrs_count = addrs_vec.count; | |
| fdata->units = (struct unit **) units_vec.vec.base; | |
| fdata->units_count = units_vec.count; | |
| fdata->dwarf_sections = *dwarf_sections; | |
| fdata->is_bigendian = is_bigendian; | |
| memset (&fdata->fvec, 0, sizeof fdata->fvec); | |
| return fdata; | |
| } | |
| /* Build our data structures from the DWARF sections for a module. | |
| Set FILELINE_FN and STATE->FILELINE_DATA. Return 1 on success, 0 | |
| on failure. */ | |
| int | |
| backtrace_dwarf_add (struct backtrace_state *state, | |
| struct libbacktrace_base_address base_address, | |
| const struct dwarf_sections *dwarf_sections, | |
| int is_bigendian, | |
| struct dwarf_data *fileline_altlink, | |
| backtrace_error_callback error_callback, | |
| void *data, fileline *fileline_fn, | |
| struct dwarf_data **fileline_entry) | |
| { | |
| struct dwarf_data *fdata; | |
| fdata = build_dwarf_data (state, base_address, dwarf_sections, is_bigendian, | |
| fileline_altlink, error_callback, data); | |
| if (fdata == NULL) | |
| return 0; | |
| if (fileline_entry != NULL) | |
| *fileline_entry = fdata; | |
| if (!state->threaded) | |
| { | |
| struct dwarf_data **pp; | |
| for (pp = (struct dwarf_data **) (void *) &state->fileline_data; | |
| *pp != NULL; | |
| pp = &(*pp)->next) | |
| ; | |
| *pp = fdata; | |
| } | |
| else | |
| { | |
| while (1) | |
| { | |
| struct dwarf_data **pp; | |
| pp = (struct dwarf_data **) (void *) &state->fileline_data; | |
| while (1) | |
| { | |
| struct dwarf_data *p; | |
| p = backtrace_atomic_load_pointer (pp); | |
| if (p == NULL) | |
| break; | |
| pp = &p->next; | |
| } | |
| if (__sync_bool_compare_and_swap (pp, NULL, fdata)) | |
| break; | |
| } | |
| } | |
| *fileline_fn = dwarf_fileline; | |
| return 1; | |
| } |