blob: efd1f42ac234d9c73aaf952e229027c36beb4f2f [file] [log] [blame]
# SPDX-License-Identifier: GPL-3.0-or-later
# GCC target-specific configuration file.
# Copyright (C) 1997-2021 Free Software Foundation, Inc.
#This file is part of GCC.
#GCC is free software; you can redistribute it and/or modify it under
#the terms of the GNU General Public License as published by the Free
#Software Foundation; either version 3, or (at your option) any later
#version.
#GCC is distributed in the hope that it will be useful, but WITHOUT
#ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
#FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
#for more details.
#You should have received a copy of the GNU General Public License
#along with GCC; see the file COPYING3. If not see
#<http://www.gnu.org/licenses/>.
# This is the GCC target-specific configuration file
# where a configuration type is mapped to different system-specific
# definitions and files. This is invoked by the autoconf-generated
# configure script. Putting it in a separate shell file lets us skip
# running autoconf when modifying target-specific information.
# When you change the cases in the OS or target switches, consider
# updating ../libgcc/config.host also.
# This file switches on the shell variable ${target}, and also uses the
# following shell variables:
#
# with_* Various variables as set by configure.
#
# enable_threads Either the name, yes or no depending on whether
# threads support was requested.
#
# default_use_cxa_atexit
# The default value for the $enable___cxa_atexit
# variable. enable___cxa_atexit needs to be set to
# "yes" for the correct operation of C++ destructors
# but it relies upon the presence of a non-standard C
# library function called __cxa_atexit.
# Since not all C libraries provide __cxa_atexit the
# default value of $default_use_cxa_atexit is set to
# "no" except for targets which are known to be OK.
#
# default_gnu_indirect_function
# The default value for the $enable_gnu_indirect_function
# variable. enable_gnu_indirect_function relies
# upon the presence of a non-standard gnu ifunc support
# in the assembler, linker and dynamic linker.
# Since not all libraries provide the dynamic linking
# support, the default value of
# $default_gnu_indirect_function is set to
# "no" except for targets which are known to be OK.
#
# gas_flag Either yes or no depending on whether GNU as was
# requested.
#
# gnu_ld_flag Either yes or no depending on whether GNU ld was
# requested.
# This file sets the following shell variables for use by the
# autoconf-generated configure script:
#
# cpu_type The name of the cpu, if different from the first
# chunk of the canonical target name.
#
# tm_defines List of target macros to define for all compilations.
#
# tm_file A list of target macro files, if different from
# "$cpu_type/$cpu_type.h". Usually it's constructed
# per target in a way like this:
# tm_file="${tm_file} dbxelf.h elfos.h ${cpu_type.h}/elf.h"
# Note that the preferred order is:
# - specific target header "${cpu_type}/${cpu_type.h}"
# - generic headers like dbxelf.h elfos.h, etc.
# - specializing target headers like ${cpu_type.h}/elf.h
# This helps to keep OS specific stuff out of the CPU
# defining header ${cpu_type}/${cpu_type.h}.
#
# It is possible to include automatically-generated
# build-directory files by prefixing them with "./".
# All other files should relative to $srcdir/config.
#
# tm_p_file Location of file with declarations for functions
# in $out_file.
#
# tm_d_file A list of headers with definitions of target hook
# macros for the D compiler.
#
# out_file The name of the machine description C support
# file, if different from "$cpu_type/$cpu_type.c".
#
# common_out_file The name of the source file for code shared between
# the compiler proper and the driver.
#
# md_file The name of the machine-description file, if
# different from "$cpu_type/$cpu_type.md".
#
# tmake_file A list of machine-description-specific
# makefile-fragments, if different from
# "$cpu_type/t-$cpu_type".
#
# extra_modes The name of the file containing a list of extra
# machine modes, if necessary and different from
# "$cpu_type/$cpu_type-modes.def".
#
# extra_objs List of extra objects that should be linked into
# the compiler proper (cc1, cc1obj, cc1plus)
# depending on target.
#
# extra_gcc_objs List of extra objects that should be linked into
# the compiler driver (gcc) depending on target.
#
# extra_headers List of used header files from the directory
# config/${cpu_type}.
#
# user_headers_inc_next_pre
# List of header file names of internal gcc header
# files, which should be prefixed by an include_next.
# user_headers_inc_next_post
# List of header file names of internal gcc header
# files, which should be postfixed by an include_next.
# use_gcc_tgmath If set, add tgmath.h to the list of used header
# files.
#
# use_gcc_stdint If "wrap", install a version of stdint.h that
# wraps the system's copy for hosted compilations;
# if "provide", provide a version of systems without
# such a system header; otherwise "none", do not
# provide such a header at all.
#
# extra_programs List of extra executables compiled for this target
# machine, used when linking.
#
# extra_options List of target-dependent .opt files.
#
# c_target_objs List of extra target-dependent objects that be
# linked into the C compiler only.
#
# cxx_target_objs List of extra target-dependent objects that be
# linked into the C++ compiler only.
#
# d_target_objs List of extra target-dependent objects that be
# linked into the D compiler only.
#
# fortran_target_objs List of extra target-dependent objects that be
# linked into the fortran compiler only.
#
# target_gtfiles List of extra source files with type information.
#
# xm_defines List of macros to define when compiling for the
# target machine.
#
# xm_file List of files to include when compiling for the
# target machine.
#
# use_collect2 Set to yes or no, depending on whether collect2
# will be used.
#
# target_cpu_default Set to override the default target model.
#
# gdb_needs_out_file_path
# Set to yes if gdb needs a dir command with
# `dirname $out_file`.
#
# thread_file Set to control which thread package to use.
#
# gas Set to yes or no depending on whether the target
# system normally uses GNU as.
#
# configure_default_options
# Set to an initializer for configure_default_options
# in configargs.h, based on --with-cpu et cetera.
#
# native_system_header_dir
# Where system header files are found for this
# target. This defaults to /usr/include. If
# the --with-sysroot configure option or the
# --sysroot command line option is used this
# will be relative to the sysroot.
# target_type_format_char
# The default character to be used for formatting
# the attribute in a
# .type symbol_name, ${t_t_f_c}<property>
# directive.
# The following variables are used in each case-construct to build up the
# outgoing variables:
#
# gnu_ld Set to yes or no depending on whether the target
# system normally uses GNU ld.
#
# target_has_targetcm Set to yes or no depending on whether the target
# has its own definition of targetcm.
#
# target_has_targetm_common Set to yes or no depending on whether the
# target has its own definition of targetm_common.
#
# target_has_targetdm Set to yes or no depending on whether the target
# has its own definition of targetdm.
out_file=
common_out_file=
tmake_file=
extra_headers=
user_headers_inc_next_pre=
user_headers_inc_next_post=
use_gcc_tgmath=yes
use_gcc_stdint=none
extra_programs=
extra_objs=
extra_gcc_objs=
extra_options=
c_target_objs=
cxx_target_objs=
d_target_objs=
fortran_target_objs=
target_has_targetcm=no
target_has_targetm_common=yes
target_has_targetdm=no
tm_defines=
xm_defines=
# Set this to force installation and use of collect2.
use_collect2=
# Set this to override the default target model.
target_cpu_default=
# Set this if gdb needs a dir command with `dirname $out_file`
gdb_needs_out_file_path=
# Set this to control which thread package will be used.
thread_file=
# Reinitialize these from the flag values every loop pass, since some
# configure entries modify them.
gas="$gas_flag"
gnu_ld="$gnu_ld_flag"
default_use_cxa_atexit=no
default_gnu_indirect_function=no
target_gtfiles=
need_64bit_isa=
native_system_header_dir=/usr/include
target_type_format_char='@'
# Don't carry these over build->host->target. Please.
xm_file=
md_file=
# Obsolete configurations.
case ${target} in
tile*-*-* \
| cr16-*-* \
| hppa[12]*-*-hpux10* \
| hppa[12]*-*-hpux11* \
)
if test "x$enable_obsolete" != xyes; then
echo "*** Configuration ${target} is obsolete." >&2
echo "*** Specify --enable-obsolete to build it anyway." >&2
echo "*** Support will be REMOVED in the next major release of GCC," >&2
echo "*** unless a maintainer comes forward." >&2
exit 1
fi;;
esac
# Unsupported targets list. Do not put an entry in this list unless
# it would otherwise be caught by a more permissive pattern. The list
# should be in alphabetical order.
case ${target} in
# Avoid special cases that are not obsolete
arm*-*-*eabi* \
)
;;
arm*-wince-pe* \
| arm*-*-ecos-elf \
| arm*-*-elf \
| arm*-*-linux* \
| arm*-*-uclinux* \
| cris-*-linux* \
| crisv32-*-* \
| i[34567]86-go32-* \
| i[34567]86-*-go32* \
| m32r-*-linux* \
| m32rle-*-linux* \
| m68k*-*-openbsd* \
| m68k-*-uclinuxoldabi* \
| mips64orion*-*-rtems* \
| pdp11-*-bsd \
| powerpc*-*-linux*paired* \
| powerpc*-*-*spe* \
| sparc-hal-solaris2* \
| spu*-*-* \
| thumb-*-* \
| *-*-freebsd[12] | *-*-freebsd[1234].* \
| *-*-freebsd*aout* \
| *-*-linux*aout* \
| *-*-linux*coff* \
| *-*-linux*libc1* \
| *-*-linux*oldld* \
| *-*-rtemsaout* \
| *-*-rtemscoff* \
| *-*-solaris2 \
| *-*-solaris2.[0-9] \
| *-*-solaris2.[0-9].* \
| *-*-solaris2.10* \
| *-*-sysv* \
| vax-*-vms* \
)
echo "*** Configuration ${target} not supported" 1>&2
exit 1
;;
esac
# Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
# updated in each machine entry. Also set default extra_headers for some
# machines.
tm_p_file=
cpu_type=`echo ${target} | sed 's/-.*$//'`
cpu_is_64bit=
case ${target} in
m32c*-*-*)
cpu_type=m32c
tmake_file=m32c/t-m32c
target_has_targetm_common=no
;;
aarch64*-*-*)
cpu_type=aarch64
extra_headers="arm_fp16.h arm_neon.h arm_bf16.h arm_acle.h arm_sve.h"
c_target_objs="aarch64-c.o"
cxx_target_objs="aarch64-c.o"
d_target_objs="aarch64-d.o"
extra_objs="aarch64-builtins.o aarch-common.o aarch64-sve-builtins.o aarch64-sve-builtins-shapes.o aarch64-sve-builtins-base.o aarch64-sve-builtins-sve2.o cortex-a57-fma-steering.o aarch64-speculation.o falkor-tag-collision-avoidance.o aarch64-bti-insert.o aarch64-cc-fusion.o"
target_gtfiles="\$(srcdir)/config/aarch64/aarch64-builtins.c \$(srcdir)/config/aarch64/aarch64-sve-builtins.h \$(srcdir)/config/aarch64/aarch64-sve-builtins.cc"
target_has_targetm_common=yes
;;
alpha*-*-*)
cpu_type=alpha
extra_options="${extra_options} g.opt"
;;
amdgcn*)
cpu_type=gcn
use_gcc_stdint=wrap
;;
am33_2.0-*-linux*)
cpu_type=mn10300
;;
arc*-*-*)
cpu_type=arc
c_target_objs="arc-c.o"
cxx_target_objs="arc-c.o"
extra_options="${extra_options} arc/arc-tables.opt g.opt"
extra_headers="arc-simd.h"
;;
arm*-*-*)
cpu_type=arm
extra_objs="arm-builtins.o aarch-common.o"
extra_headers="mmintrin.h arm_neon.h arm_acle.h arm_fp16.h arm_cmse.h arm_bf16.h arm_mve_types.h arm_mve.h arm_cde.h"
target_type_format_char='%'
c_target_objs="arm-c.o"
cxx_target_objs="arm-c.o"
d_target_objs="arm-d.o"
extra_options="${extra_options} arm/arm-tables.opt"
target_gtfiles="\$(srcdir)/config/arm/arm-builtins.c"
;;
avr-*-*)
cpu_type=avr
c_target_objs="avr-c.o"
cxx_target_objs="avr-c.o"
;;
bfin*-*)
cpu_type=bfin
;;
bpf-*-*)
cpu_type=bpf
;;
frv*) cpu_type=frv
extra_options="${extra_options} g.opt"
;;
ft32*) cpu_type=ft32
target_has_targetm_common=no
;;
moxie*) cpu_type=moxie
target_has_targetm_common=no
;;
fido-*-*)
cpu_type=m68k
extra_headers=math-68881.h
extra_options="${extra_options} m68k/m68k-tables.opt"
;;
i[34567]86-*-* | x86_64-*-*)
cpu_type=i386
c_target_objs="i386-c.o"
cxx_target_objs="i386-c.o"
d_target_objs="i386-d.o"
extra_objs="x86-tune-sched.o x86-tune-sched-bd.o x86-tune-sched-atom.o x86-tune-sched-core.o i386-options.o i386-builtins.o i386-expand.o i386-features.o"
target_gtfiles="\$(srcdir)/config/i386/i386-builtins.c \$(srcdir)/config/i386/i386-expand.c \$(srcdir)/config/i386/i386-options.c"
extra_options="${extra_options} fused-madd.opt"
extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
immintrin.h x86intrin.h avxintrin.h xopintrin.h
ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
lzcntintrin.h bmiintrin.h bmi2intrin.h tbmintrin.h
avx2intrin.h avx512fintrin.h fmaintrin.h f16cintrin.h
rtmintrin.h xtestintrin.h rdseedintrin.h prfchwintrin.h
adxintrin.h fxsrintrin.h xsaveintrin.h xsaveoptintrin.h
avx512cdintrin.h avx512erintrin.h avx512pfintrin.h
shaintrin.h clflushoptintrin.h xsavecintrin.h
xsavesintrin.h avx512dqintrin.h avx512bwintrin.h
avx512vlintrin.h avx512vlbwintrin.h avx512vldqintrin.h
avx512ifmaintrin.h avx512ifmavlintrin.h avx512vbmiintrin.h
avx512vbmivlintrin.h avx5124fmapsintrin.h avx5124vnniwintrin.h
avx512vpopcntdqintrin.h clwbintrin.h mwaitxintrin.h
clzerointrin.h pkuintrin.h sgxintrin.h cetintrin.h
gfniintrin.h cet.h avx512vbmi2intrin.h
avx512vbmi2vlintrin.h avx512vnniintrin.h
avx512vnnivlintrin.h vaesintrin.h vpclmulqdqintrin.h
avx512vpopcntdqvlintrin.h avx512bitalgintrin.h
pconfigintrin.h wbnoinvdintrin.h movdirintrin.h
waitpkgintrin.h cldemoteintrin.h avx512bf16vlintrin.h
avx512bf16intrin.h enqcmdintrin.h serializeintrin.h
avx512vp2intersectintrin.h avx512vp2intersectvlintrin.h
tsxldtrkintrin.h amxtileintrin.h amxint8intrin.h
amxbf16intrin.h x86gprintrin.h uintrintrin.h
hresetintrin.h keylockerintrin.h avxvnniintrin.h
mwaitintrin.h avx512fp16intrin.h avx512fp16vlintrin.h"
;;
ia64-*-*)
extra_headers=ia64intrin.h
extra_options="${extra_options} g.opt fused-madd.opt"
;;
hppa*-*-*)
cpu_type=pa
;;
lm32*)
extra_options="${extra_options} g.opt"
;;
m32r*-*-*)
cpu_type=m32r
extra_options="${extra_options} g.opt"
;;
m68k-*-*)
extra_headers=math-68881.h
extra_options="${extra_options} m68k/m68k-tables.opt"
;;
microblaze*-*-*)
cpu_type=microblaze
extra_options="${extra_options} g.opt"
;;
mips*-*-*)
cpu_type=mips
d_target_objs="mips-d.o"
extra_headers="loongson.h loongson-mmiintrin.h msa.h"
extra_objs="frame-header-opt.o"
extra_options="${extra_options} g.opt fused-madd.opt mips/mips-tables.opt"
;;
nds32*)
cpu_type=nds32
extra_headers="nds32_intrinsic.h nds32_isr.h nds32_init.inc"
case ${target} in
nds32*-*-linux*)
extra_options="${extra_options} nds32/nds32-linux.opt"
;;
nds32*-*-elf*)
extra_options="${extra_options} nds32/nds32-elf.opt"
;;
*)
;;
esac
extra_objs="nds32-cost.o nds32-intrinsic.o nds32-isr.o nds32-md-auxiliary.o nds32-pipelines-auxiliary.o nds32-predicates.o nds32-memory-manipulation.o nds32-fp-as-gp.o nds32-relax-opt.o nds32-utils.o"
;;
nios2-*-*)
cpu_type=nios2
extra_options="${extra_options} g.opt"
;;
nvptx-*-*)
cpu_type=nvptx
c_target_objs="nvptx-c.o"
cxx_target_objs="nvptx-c.o"
;;
or1k*-*-*)
cpu_type=or1k
;;
powerpc*-*-*)
cpu_type=rs6000
extra_objs="rs6000-string.o rs6000-p8swap.o rs6000-logue.o"
extra_objs="${extra_objs} rs6000-call.o rs6000-pcrel-opt.o"
extra_objs="${extra_objs} rs6000-builtins.o"
extra_headers="ppc-asm.h altivec.h htmintrin.h htmxlintrin.h"
extra_headers="${extra_headers} bmi2intrin.h bmiintrin.h"
extra_headers="${extra_headers} xmmintrin.h mm_malloc.h emmintrin.h"
extra_headers="${extra_headers} mmintrin.h x86intrin.h"
extra_headers="${extra_headers} pmmintrin.h tmmintrin.h smmintrin.h"
extra_headers="${extra_headers} nmmintrin.h immintrin.h x86gprintrin.h"
extra_headers="${extra_headers} ppu_intrinsics.h spu2vmx.h vec_types.h si2vmx.h"
extra_headers="${extra_headers} amo.h"
case x$with_cpu in
xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456789]|xpower10|xpower6x|xrs64a|xcell|xa2|xe500mc64|xe5500|xe6500)
cpu_is_64bit=yes
;;
esac
extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-logue.c \$(srcdir)/config/rs6000/rs6000-call.c"
target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-pcrel-opt.c"
target_gtfiles="$target_gtfiles ./rs6000-builtins.h"
;;
pru-*-*)
cpu_type=pru
;;
riscv*)
cpu_type=riscv
extra_objs="riscv-builtins.o riscv-c.o riscv-sr.o riscv-shorten-memrefs.o"
d_target_objs="riscv-d.o"
;;
rs6000*-*-*)
extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
extra_objs="rs6000-string.o rs6000-p8swap.o rs6000-logue.o"
extra_objs="${extra_objs} rs6000-call.o rs6000-pcrel-opt.o"
target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-logue.c \$(srcdir)/config/rs6000/rs6000-call.c"
target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-pcrel-opt.c"
;;
sparc*-*-*)
cpu_type=sparc
c_target_objs="sparc-c.o"
cxx_target_objs="sparc-c.o"
d_target_objs="sparc-d.o"
extra_headers="visintrin.h"
;;
s390*-*-*)
cpu_type=s390
d_target_objs="s390-d.o"
extra_options="${extra_options} fused-madd.opt"
extra_headers="s390intrin.h htmintrin.h htmxlintrin.h vecintrin.h"
;;
# Note the 'l'; we need to be able to match e.g. "shle" or "shl".
sh[123456789lbe]*-*-* | sh-*-*)
cpu_type=sh
extra_options="${extra_options} fused-madd.opt"
extra_objs="${extra_objs} sh_treg_combine.o sh-mem.o sh_optimize_sett_clrt.o"
;;
v850*-*-*)
cpu_type=v850
;;
tic6x-*-*)
cpu_type=c6x
extra_headers="c6x_intrinsics.h"
extra_options="${extra_options} c6x/c6x-tables.opt"
;;
xtensa*-*-*)
extra_options="${extra_options} fused-madd.opt"
;;
tilegx*-*-*)
cpu_type=tilegx
;;
tilepro*-*-*)
cpu_type=tilepro
;;
esac
tm_file=${cpu_type}/${cpu_type}.h
tm_d_file=${cpu_type}/${cpu_type}.h
if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
then
tm_p_file=${cpu_type}/${cpu_type}-protos.h
tm_d_file="${tm_d_file} ${cpu_type}/${cpu_type}-protos.h"
fi
extra_modes=
if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
then
extra_modes=${cpu_type}/${cpu_type}-modes.def
fi
if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
then
extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
fi
case ${target} in
aarch64*-*-*)
tm_p_file="${tm_p_file} arm/aarch-common-protos.h"
case ${with_abi} in
"")
if test "x$with_multilib_list" = xilp32; then
tm_file="aarch64/biarchilp32.h ${tm_file}"
else
tm_file="aarch64/biarchlp64.h ${tm_file}"
fi
;;
ilp32)
tm_file="aarch64/biarchilp32.h ${tm_file}"
;;
lp64)
tm_file="aarch64/biarchlp64.h ${tm_file}"
;;
*)
echo "Unknown ABI used in --with-abi=$with_abi"
exit 1
esac
;;
i[34567]86-*-*)
if test "x$with_abi" != x; then
echo "This target does not support --with-abi."
exit 1
fi
;;
x86_64-*-darwin*)
;;
x86_64-*-*)
case ${with_abi} in
"")
if test "x$with_multilib_list" = xmx32; then
tm_file="i386/biarchx32.h ${tm_file}"
else
tm_file="i386/biarch64.h ${tm_file}"
fi
;;
64 | m64)
tm_file="i386/biarch64.h ${tm_file}"
;;
x32 | mx32)
tm_file="i386/biarchx32.h ${tm_file}"
;;
*)
echo "Unknown ABI used in --with-abi=$with_abi"
exit 1
esac
;;
arm*-*-*)
tm_p_file="arm/arm-flags.h ${tm_p_file} arm/aarch-common-protos.h"
;;
esac
# On a.out targets, we need to use collect2.
case ${target} in
*-*-*aout*)
use_collect2=yes
;;
esac
# Common C libraries.
tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3 LIBC_MUSL=4"
# 32-bit x86 processors supported by --with-arch=. Each processor
# MUST be separated by exactly one space.
x86_archs="athlon athlon-4 athlon-fx athlon-mp athlon-tbird \
athlon-xp k6 k6-2 k6-3 geode c3 c3-2 winchip-c6 winchip2 i386 i486 \
i586 i686 pentium pentium-m pentium-mmx pentium2 pentium3 pentium3m \
pentium4 pentium4m pentiumpro prescott lakemont samuel-2 nehemiah \
c7 esther"
# 64-bit x86 processors supported by --with-arch=. Each processor
# MUST be separated by exactly one space.
x86_64_archs="amdfam10 athlon64 athlon64-sse3 barcelona bdver1 bdver2 \
bdver3 bdver4 znver1 znver2 znver3 btver1 btver2 k8 k8-sse3 opteron \
opteron-sse3 nocona core2 corei7 corei7-avx core-avx-i core-avx2 atom \
slm nehalem westmere sandybridge ivybridge haswell broadwell bonnell \
silvermont knl knm skylake-avx512 cannonlake icelake-client icelake-server \
skylake goldmont goldmont-plus tremont cascadelake tigerlake cooperlake \
sapphirerapids alderlake rocketlake eden-x2 nano nano-1000 nano-2000 nano-3000 \
nano-x2 eden-x4 nano-x4 x86-64 x86-64-v2 x86-64-v3 x86-64-v4 native"
# Additional x86 processors supported by --with-cpu=. Each processor
# MUST be separated by exactly one space.
x86_cpus="generic intel"
# Common parts for widely ported systems.
case ${target} in
*-*-darwin*)
tmake_file="t-darwin "
tm_file="${tm_file} darwin.h"
tm_d_file="${tm_d_file} tm-dwarf2.h"
darwin_os=`echo ${target} | sed 's/.*darwin\([0-9.]*\).*$/\1/'`
darwin_maj=`expr "$darwin_os" : '\([0-9]*\).*'`
macos_min=`expr "$darwin_os" : '[0-9]*\.\([0-9]*\).*'`
macos_maj=10
if test x"${macos_min}" = x; then
macos_min=0
fi
def_ld64=85.2
case ${target} in
# Darwin 4 to 19 correspond to macOS 10.0 to 10.15
*-*-darwin[4-9]* | *-*-darwin1[0-9]*)
macos_min=`expr $darwin_maj - 4`
;;
*-*-darwin20*)
# Darwin 20 corresponds to macOS 11.
macos_maj=11
def_ld64=609.0
;;
*-*-darwin)
case ${cpu_type} in
aarch64) macos_maj=11 ;;
x86_64) macos_min=6 ;;
*) macos_min=5 ;;
esac
case ${host} in
*-*-darwin*) tm_defines="$tm_defines DARWIN_USE_KERNEL_VERS" ;;
*)
# If configuring a cross-compiler then we will have set some
# default above, but it is probably not what was intended.
echo "Warning: Using ${target} is only suitable for Darwin hosts" 1>&2
echo "configure with an explicit target version" 1>&2
;;
esac
;;
*)
echo "Error: configuring for an unreleased macOS version ${target}" 1>&2
exit 1
;;
esac
tm_defines="$tm_defines DEF_MIN_OSX_VERSION=\\\"${macos_maj}.${macos_min}\\\""
tm_defines="$tm_defines DEF_LD64=\\\"${def_ld64}\\\""
tm_file="${tm_file} ${cpu_type}/darwin.h"
tm_p_file="${tm_p_file} darwin-protos.h"
target_gtfiles="$target_gtfiles \$(srcdir)/config/darwin.c"
extra_options="${extra_options} rpath.opt darwin.opt"
c_target_objs="${c_target_objs} darwin-c.o"
cxx_target_objs="${cxx_target_objs} darwin-c.o"
d_target_objs="${d_target_objs} darwin-d.o"
fortran_target_objs="darwin-f.o"
target_has_targetcm=yes
target_has_targetdm=yes
extra_objs="${extra_objs} darwin.o"
extra_gcc_objs="darwin-driver.o"
default_use_cxa_atexit=yes
use_gcc_stdint=wrap
case ${enable_threads} in
"" | yes | posix) thread_file='posix' ;;
esac
;;
*-*-dragonfly*)
gas=yes
gnu_ld=yes
tmake_file="t-slibgcc"
case ${enable_threads} in
"" | yes | posix)
thread_file='posix'
;;
no | single)
# Let these non-posix thread selections fall through if requested
;;
*)
echo 'Unknown thread configuration for DragonFly BSD'
exit 1
;;
esac
extra_options="$extra_options rpath.opt dragonfly.opt"
default_use_cxa_atexit=yes
use_gcc_stdint=wrap
d_target_objs="${d_target_objs} dragonfly-d.o"
tmake_file="${tmake_file} t-dragonfly"
target_has_targetdm=yes
;;
*-*-freebsd*)
# This is the generic ELF configuration of FreeBSD. Later
# machine-specific sections may refine and add to this
# configuration.
#
# Due to tm_file entry ordering issues that vary between cpu
# architectures, we only define fbsd_tm_file to allow the
# machine-specific section to dictate the final order of all
# entries of tm_file with the minor exception that components
# of the tm_file set here will always be of the form:
#
# freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
#
# The machine-specific section should not tamper with this
# ordering but may order all other entries of tm_file as it
# pleases around the provided core setting.
gas=yes
gnu_ld=yes
fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
if test "$fbsd_major" = ""; then
echo "Specify the major version number of the targeted FreeBSD release"
echo "like this: --target=amd64-unknown-freebsd10.1"
exit 1
fi
tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
tmake_file="t-slibgcc"
case ${enable_threads} in
no)
fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
;;
"" | yes | posix)
thread_file='posix'
;;
*)
echo 'Unknown thread configuration for FreeBSD'
exit 1
;;
esac
fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h"
extra_options="$extra_options rpath.opt freebsd.opt"
case ${target} in
*-*-freebsd[345].*)
:;;
*)
default_use_cxa_atexit=yes;;
esac
use_gcc_stdint=wrap
d_target_objs="${d_target_objs} freebsd-d.o"
tmake_file="${tmake_file} t-freebsd"
target_has_targetdm=yes
;;
*-*-fuchsia*)
native_system_header_dir=/include
;;
*-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu | *-*-uclinuxfdpiceabi)
extra_options="$extra_options gnu-user.opt"
gas=yes
gnu_ld=yes
case ${enable_threads} in
"" | yes | posix) thread_file='posix' ;;
esac
tmake_file="t-slibgcc"
case $target in
*-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-kopensolaris*-gnu)
:;;
*-*-gnu*)
native_system_header_dir=/include
;;
esac
# Linux C libraries selection switch: glibc / uclibc / bionic.
# uclibc and bionic aren't usable for GNU/Hurd and neither for GNU/k*BSD.
case $target in
*linux*)
tm_p_file="${tm_p_file} linux-protos.h"
tmake_file="${tmake_file} t-linux"
extra_objs="${extra_objs} linux.o"
extra_options="${extra_options} linux.opt"
;;
esac
case $target in
*-*-*android*)
tm_defines="$tm_defines DEFAULT_LIBC=LIBC_BIONIC"
;;
*-*-*uclibc* | *-*-uclinuxfdpiceabi)
tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
;;
*-*-*musl*)
tm_defines="$tm_defines DEFAULT_LIBC=LIBC_MUSL"
;;
*)
tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
;;
esac
# Assume that glibc or uClibc or Bionic are being used and so __cxa_atexit
# is provided.
default_use_cxa_atexit=yes
use_gcc_tgmath=no
use_gcc_stdint=wrap
# Enable compilation for Android by default for *android* targets.
case $target in
*-*-*android*)
tm_defines="$tm_defines ANDROID_DEFAULT=1"
;;
*)
tm_defines="$tm_defines ANDROID_DEFAULT=0"
;;
esac
c_target_objs="${c_target_objs} glibc-c.o"
cxx_target_objs="${cxx_target_objs} glibc-c.o"
d_target_objs="${d_target_objs} glibc-d.o"
tmake_file="${tmake_file} t-glibc"
target_has_targetcm=yes
target_has_targetdm=yes
case $target in
*-*-*uclibc* | *-*-uclinuxfdpiceabi)
;;
*)
# Linux targets always support .init_array.
gcc_cv_initfini_array=yes
;;
esac
;;
*-*-netbsd*)
tm_p_file="${tm_p_file} netbsd-protos.h"
tmake_file="t-netbsd t-slibgcc"
extra_objs="${extra_objs} netbsd.o"
d_target_objs="${d_target_objs} netbsd-d.o"
gas=yes
gnu_ld=yes
use_gcc_stdint=wrap
case ${enable_threads} in
"" | yes | posix) thread_file='posix' ;;
esac
nbsd_tm_file="netbsd.h netbsd-stdint.h netbsd-elf.h"
default_use_cxa_atexit=yes
target_has_targetdm=yes
case ${target} in
arm*-* | i[34567]86-* | powerpc*-* | sparc*-* | x86_64-*)
default_gnu_indirect_function=yes
;;
esac
;;
*-*-openbsd*)
tmake_file="t-openbsd"
case ${enable_threads} in
yes)
thread_file='posix'
;;
esac
case ${target} in
*-*-openbsd4.[3-9]|*-*-openbsd[5-9]*)
default_use_cxa_atexit=yes
;;
esac
d_target_objs="${d_target_objs} openbsd-d.o"
target_has_targetdm=yes
;;
*-*-phoenix*)
gas=yes
gnu_ld=yes
default_use_cxa_atexit=yes
;;
*-*-rtems*)
case ${enable_threads} in
"" | yes | rtems) thread_file='rtems' ;;
posix) thread_file='posix' ;;
no) ;;
*)
echo 'Unknown thread configuration for RTEMS'
exit 1
;;
esac
tmake_file="${tmake_file} t-rtems"
extra_options="${extra_options} rtems.opt"
default_use_cxa_atexit=yes
use_gcc_stdint=wrap
;;
*-*-uclinux*)
extra_options="$extra_options gnu-user.opt"
use_gcc_stdint=wrap
case ${enable_threads} in
"" | yes | posix) thread_file='posix' ;;
esac
tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC SINGLE_LIBC"
;;
*-*-rdos*)
use_gcc_stdint=wrap
;;
*-*-solaris2*)
# i?86-*-solaris2* needs to insert headers between cpu default and
# Solaris 2 specific ones.
sol2_tm_file_head="dbxelf.h elfos.h ${cpu_type}/sysv4.h"
sol2_tm_file_tail="${cpu_type}/sol2.h sol2.h"
sol2_tm_file="${sol2_tm_file_head} ${sol2_tm_file_tail}"
case ${target} in
*-*-solaris2.1[1-9]*)
# __cxa_atexit was introduced in Solaris 11.4.
default_use_cxa_atexit=yes
;;
esac
use_gcc_stdint=wrap
if test x$gnu_ld = xyes; then
tm_file="usegld.h ${tm_file}"
fi
if test x$gas = xyes; then
tm_file="usegas.h ${tm_file}"
fi
tm_p_file="${tm_p_file} sol2-protos.h"
tmake_file="${tmake_file} t-sol2 t-slibgcc"
c_target_objs="${c_target_objs} sol2-c.o"
cxx_target_objs="${cxx_target_objs} sol2-c.o sol2-cxx.o"
d_target_objs="${d_target_objs} sol2-d.o"
extra_objs="${extra_objs} sol2.o sol2-stubs.o"
extra_options="${extra_options} sol2.opt"
case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
"":yes:* | yes:yes:* )
thread_file=posix
;;
esac
target_has_targetdm=yes
;;
*-*-*vms*)
extra_options="${extra_options} vms/vms.opt"
xmake_file=vms/x-vms
tmake_file="vms/t-vms t-slibgcc"
extra_objs="vms.o"
target_gtfiles="$target_gtfiles \$(srcdir)/config/vms/vms.c"
tm_p_file="${tm_p_file} vms/vms-protos.h"
xm_file="vms/xm-vms.h"
c_target_objs="vms-c.o"
cxx_target_objs="vms-c.o"
fortran_target_objs="vms-f.o"
use_gcc_stdint=provide
tm_file="${tm_file} vms/vms-stdint.h"
if test x$gnu_ld != xyes; then
# Build wrappers for native case.
extra_programs="ld\$(exeext) ar\$(exeext)"
tmake_file="$tmake_file vms/t-vmsnative"
fi
;;
*-*-vxworks*)
tmake_file=t-vxworks
xm_defines=POSIX
extra_options="${extra_options} vxworks.opt"
extra_objs="$extra_objs vxworks.o"
c_target_objs="${c_target_objs} vxworks-c.o"
cxx_target_objs="${cxx_target_objs} vxworks-c.o"
extra_headers="${extra_headers} ../vxworks/vxworks-predef.h"
target_has_targetcm="yes"
# This private header exposes a consistent interface for checks on
# the VxWorks version our runtime header files need to perform, based on
# what the system headers adverstise:
extra_headers="${extra_headers} ../vxworks/_vxworks-versions.h"
# Starting from VxWorks 7, the system comes with a Dinkumware
# environment which requires the inclusion of "yvals.h" before other
# system headers. We provide wrapped versions of a few headers to
# accomodate such constraints:
extra_headers="${extra_headers} ../vxworks/_yvals.h"
extra_headers="${extra_headers} ../vxworks/_yvals-wrapper.h"
extra_headers="${extra_headers} ../vxworks/math.h ../vxworks/complex.h"
extra_headers="${extra_headers} ../vxworks/inttypes.h ../vxworks/setjmp.h"
# We provide stdint.h ...
tm_file="${tm_file} vxworks-stdint.h"
# .. only through the yvals conditional wrapping mentioned above
# to abide by the VxWorks 7 expectations. The final copy is performed
# explicitly by a t-vxworks Makefile rule.
use_gcc_stdint=none
extra_headers="${extra_headers} ../../ginclude/stdint-gcc.h"
case ${enable_threads} in
no) ;;
"" | yes | vxworks) thread_file='vxworks' ;;
*) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
esac
# A few common macro definitions conveying general characteristics
# of the configuration at hand. Note that by VxWorks 7, we mean the
# the SR6xx major update or beyond in vendor parlance:
case $target in
*-*-vxworks7*)
tm_defines="$tm_defines TARGET_VXWORKS7=1"
;;
esac
case $target in
*64-*-vxworks*)
tm_defines="$tm_defines TARGET_VXWORKS64=1"
;;
esac
# Then a few build configuration controls for VxWorks 7, which
# has specificities on top of which we aim to provide more complete
# C++ support:
case $target in
*-*-vxworks7*)
# VxWorks 7 always has init/fini_array support and it is simpler to
# just leverage this, sticking to what the system toolchain does:
gcc_cv_initfini_array=yes
;;
esac
;;
*-*-elf|arc*-*-elf*)
# Assume that newlib is being used and so __cxa_atexit is provided.
default_use_cxa_atexit=yes
use_gcc_stdint=wrap
;;
esac
case ${target} in
aarch64*-*-elf | aarch64*-*-fuchsia* | aarch64*-*-rtems*)
tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h"
tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-elf-raw.h"
tmake_file="${tmake_file} aarch64/t-aarch64"
case $target in
aarch64-*-elf*)
use_gcc_stdint=wrap
;;
aarch64-*-fuchsia*)
tm_file="${tm_file} fuchsia.h"
;;
aarch64-*-rtems*)
tm_file="${tm_file} aarch64/rtems.h rtems.h"
;;
esac
case $target in
aarch64_be-*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
;;
esac
aarch64_multilibs="${with_multilib_list}"
if test "$aarch64_multilibs" = "default"; then
aarch64_multilibs="lp64,ilp32"
fi
aarch64_multilibs=`echo $aarch64_multilibs | sed -e 's/,/ /g'`
for aarch64_multilib in ${aarch64_multilibs}; do
case ${aarch64_multilib} in
ilp32 | lp64 )
TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${aarch64_multilib}"
;;
*)
echo "--with-multilib-list=${aarch64_multilib} not supported."
exit 1
esac
done
TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
;;
aarch64*-*-freebsd*)
tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file}"
tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-freebsd.h"
tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-freebsd"
tm_defines="${tm_defines} TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1"
;;
aarch64*-*-netbsd*)
tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file}"
tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-netbsd.h"
tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-netbsd"
extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
;;
aarch64*-*-linux*)
tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h"
tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-linux.h"
tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-linux"
tm_defines="${tm_defines} TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1"
case $target in
aarch64_be-*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
;;
esac
aarch64_multilibs="${with_multilib_list}"
if test "$aarch64_multilibs" = "default"; then
# TODO: turn on ILP32 multilib build after its support is mature.
# aarch64_multilibs="lp64,ilp32"
aarch64_multilibs="lp64"
fi
aarch64_multilibs=`echo $aarch64_multilibs | sed -e 's/,/ /g'`
for aarch64_multilib in ${aarch64_multilibs}; do
case ${aarch64_multilib} in
ilp32 | lp64 )
TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${aarch64_multilib}"
;;
*)
echo "--with-multilib-list=${aarch64_multilib} not supported."
exit 1
esac
done
TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
;;
aarch64*-wrs-vxworks*)
tm_file="${tm_file} elfos.h aarch64/aarch64-elf.h"
tm_file="${tm_file} vx-common.h vxworks.h aarch64/aarch64-vxworks.h"
tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-vxworks"
;;
alpha*-*-linux*)
tm_file="elfos.h ${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
tmake_file="${tmake_file} alpha/t-linux alpha/t-alpha"
extra_options="${extra_options} alpha/elf.opt"
;;
alpha*-*-netbsd*)
tm_file="elfos.h ${tm_file} ${nbsd_tm_file} alpha/elf.h alpha/netbsd.h"
tmake_file="${tmake_file} alpha/t-alpha"
extra_options="${extra_options} netbsd.opt netbsd-elf.opt \
alpha/elf.opt"
;;
alpha*-*-openbsd*)
tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
tm_file="elfos.h alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h"
tmake_file="${tmake_file} alpha/t-alpha"
extra_options="${extra_options} openbsd.opt alpha/elf.opt"
# default x-alpha is only appropriate for dec-osf.
;;
alpha*-dec-*vms*)
tm_file="${tm_file} vms/vms.h alpha/vms.h"
tmake_file="${tmake_file} alpha/t-vms alpha/t-alpha"
;;
arc*-*-elf*)
tm_file="arc/arc-arch.h dbxelf.h elfos.h newlib-stdint.h arc/elf.h ${tm_file}"
tmake_file="arc/t-multilib arc/t-arc"
extra_gcc_objs="driver-arc.o"
if test "x$with_cpu" != x; then
tm_defines="${tm_defines} TARGET_CPU_BUILD=PROCESSOR_$with_cpu"
fi
if test x${with_endian} = x; then
case ${target} in
arc*be-*-* | arc*eb-*-*) with_endian=big ;;
*) with_endian=little ;;
esac
fi
case ${with_endian} in
big|little) ;;
*) echo "with_endian=${with_endian} not supported."; exit 1 ;;
esac
case ${with_endian} in
big*) tm_file="arc/big.h ${tm_file}"
esac
;;
arc*-*-linux*)
tm_file="arc/arc-arch.h dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arc/linux.h ${tm_file}"
tmake_file="${tmake_file} arc/t-multilib-linux arc/t-arc"
extra_gcc_objs="driver-arc.o"
if test "x$with_cpu" != x; then
tm_defines="${tm_defines} TARGET_CPU_BUILD=PROCESSOR_$with_cpu"
fi
if test x${with_endian} = x; then
case ${target} in
arc*be-*-* | arc*eb-*-*) with_endian=big ;;
*) with_endian=little ;;
esac
fi
case ${with_endian} in
big|little) ;;
*) echo "with_endian=${with_endian} not supported."; exit 1 ;;
esac
case ${with_endian} in
big*) tm_file="arc/big.h ${tm_file}"
esac
# Force .init_array support. The configure script cannot always
# automatically detect that GAS supports it, yet we require it.
gcc_cv_initfini_array=yes
;;
arm-wrs-vxworks7*)
# We only support VxWorks 7 now on ARM, post SR600. Pre SR600
# VxWorks 7 was transitory and major versions prior to 7 were based
# on long deprecated ABI, not supported at all any more regardless
# of VxWorks.
extra_options="${extra_options} arm/vxworks.opt"
tmake_file="${tmake_file} arm/t-arm arm/t-vxworks arm/t-bpabi"
tm_file="elfos.h arm/elf.h arm/bpabi.h arm/aout.h ${tm_file}"
tm_file="${tm_file} vx-common.h vxworks.h arm/vxworks.h"
target_cpu_cname="generic-armv7-a"
need_64bit_hwint=yes
;;
arm*-*-freebsd*) # ARM FreeBSD EABI
tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h"
case $target in
arm*b-*-freebsd*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
;;
esac
tmake_file="${tmake_file} arm/t-arm arm/t-bpabi"
tm_file="${tm_file} arm/bpabi.h arm/freebsd.h arm/aout.h arm/arm.h"
case $target in
armv6*-*-freebsd*)
target_cpu_cname="arm1176jzf-s"
if test $fbsd_major -ge 11; then
tm_defines="${tm_defines} TARGET_FREEBSD_ARM_HARD_FLOAT=1"
fi
;;
armv7*-*-freebsd*)
target_cpu_cname="generic-armv7-a"
tm_defines="${tm_defines} TARGET_FREEBSD_ARM_HARD_FLOAT=1"
;;
*)
target_cpu_cname="arm9"
;;
esac
with_tls=${with_tls:-gnu}
;;
arm*-*-netbsdelf*)
target_cpu_cname="strongarm"
tmake_file="${tmake_file} arm/t-arm"
tm_file="dbxelf.h elfos.h ${nbsd_tm_file} arm/elf.h"
extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
case ${target} in
arm*eb-*) tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" ;;
esac
case ${target} in
arm*-*-netbsdelf-*eabi*)
tm_file="$tm_file arm/bpabi.h arm/netbsd-elf.h arm/netbsd-eabi.h"
tmake_file="$tmake_file arm/t-bpabi arm/t-netbsdeabi"
;;
*)
tm_file="$tm_file arm/netbsd-elf.h"
tmake_file="$tmake_file arm/t-netbsd"
;;
esac
tm_file="${tm_file} arm/aout.h arm/arm.h"
case ${target} in
arm*-*-netbsdelf-*eabihf*)
# Hard-float requires at least Arm v5te
target_cpu_cname="arm10e"
tm_defines="${tm_defines} TARGET_DEFAULT_FLOAT_ABI=ARM_FLOAT_ABI_HARD"
;;
esac
case ${target} in
armv6*) target_cpu_cname="arm1176jzf-s";;
armv7*) target_cpu_cname="generic-armv7-a";;
esac
;;
arm*-*-linux-* | arm*-*-uclinuxfdpiceabi)
tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
extra_options="${extra_options} linux-android.opt"
case $target in
arm*b-*-linux*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
;;
esac
tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h arm/aout.h arm/arm.h"
case $target in
arm*-*-uclinuxfdpiceabi)
tm_file="$tm_file arm/uclinuxfdpiceabi.h"
;;
esac
# Generation of floating-point instructions requires at least ARMv5te.
if [ "$with_float" = "hard" -o "$with_float" = "softfp" ] ; then
target_cpu_cname="arm10e"
else
target_cpu_cname="arm10tdmi"
fi
# Define multilib configuration for arm-linux-androideabi.
case ${target} in
*-androideabi)
tmake_file="$tmake_file arm/t-linux-androideabi"
;;
esac
# The EABI requires the use of __cxa_atexit.
default_use_cxa_atexit=yes
with_tls=${with_tls:-gnu}
;;
arm*-*-uclinux*eabi*) # ARM ucLinux
tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf arm/t-bpabi"
tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h arm/aout.h arm/arm.h"
target_cpu_cname="arm7tdmi"
# The EABI requires the use of __cxa_atexit.
default_use_cxa_atexit=yes
;;
arm*-*-phoenix*)
tm_file="elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
tm_file="${tm_file} newlib-stdint.h phoenix.h"
tm_file="${tm_file} arm/aout.h arm/arm.h"
tmake_file="${tmake_file} arm/t-arm arm/t-bpabi arm/t-phoenix"
target_cpu_cname="arm7tdmi"
;;
arm*-*-eabi* | arm*-*-symbianelf* | arm*-*-rtems* | arm*-*-fuchsia*)
case ${target} in
arm*eb-*-eabi*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
esac
default_use_cxa_atexit=yes
tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf"
target_cpu_cname="arm7tdmi"
case ${target} in
arm*-*-eabi*)
tm_file="$tm_file newlib-stdint.h"
tmake_file="${tmake_file} arm/t-bpabi"
use_gcc_stdint=wrap
;;
arm*-*-fuchsia*)
tm_file="${tm_file} fuchsia.h arm/fuchsia-elf.h glibc-stdint.h"
tmake_file="${tmake_file} arm/t-bpabi arm/t-fuchsia"
target_cpu_cname="generic-armv7-a"
;;
arm*-*-rtems*)
tm_file="${tm_file} arm/rtems.h rtems.h newlib-stdint.h"
tmake_file="${tmake_file} arm/t-bpabi arm/t-rtems"
;;
arm*-*-symbianelf*)
tm_file="${tm_file} arm/symbian.h"
# We do not include t-bpabi for Symbian OS because the system
# provides its own implementation of the BPABI functions.
tmake_file="${tmake_file} arm/t-symbian"
target_cpu_cname="arm10tdmi"
;;
esac
tm_file="${tm_file} arm/aout.h arm/arm.h"
;;
avr-*-*)
tm_file="elfos.h avr/elf.h avr/avr-arch.h avr/avr.h avr/specs.h dbxelf.h avr/avr-stdint.h"
if test x${with_avrlibc} != xno; then
tm_file="${tm_file} ${cpu_type}/avrlibc.h"
tm_defines="${tm_defines} WITH_AVRLIBC"
fi
# Work out avr_double_comparison which is 2 or 3 and is used in
# target hook FLOAT_LIB_COMPARE_RETURNS_BOOL to determine whether
# DFmode comparisons return 3-state or 2-state results.
case y${with_double_comparison} in
y | ytristate)
avr_double_comparison=3
;;
ybool | ylibf7)
avr_double_comparison=2
;;
*)
echo "Error: --with-double-comparison= can only be used with: 'tristate', 'bool', 'libf7'" 1>&2
exit 1
;;
esac
case "y${with_libf7}" in
yno)
# avr_double_comparison as set above.
;;
ylibgcc)
avr_double_comparison=2
tm_defines="${tm_defines} WITH_LIBF7_LIBGCC"
;;
y | yyes | ymath-symbols)
avr_double_comparison=2
tm_defines="${tm_defines} WITH_LIBF7_LIBGCC"
tm_defines="${tm_defines} WITH_LIBF7_MATH"
tm_defines="${tm_defines} WITH_LIBF7_MATH_SYMBOLS"
;;
ymath)
avr_double_comparison=2
tm_defines="${tm_defines} WITH_LIBF7_LIBGCC"
tm_defines="${tm_defines} WITH_LIBF7_MATH"
;;
*)
echo "Error: --with-libf7=${with_libf7} but can only be used with: 'libgcc', 'math', 'math-symbols', 'yes', 'no'" 1>&2
exit 1
;;
esac
tm_defines="${tm_defines} WITH_DOUBLE_COMPARISON=${avr_double_comparison}"
case y${with_double} in
y32)
avr_double=32
tm_defines="${tm_defines} HAVE_DOUBLE32"
;;
y64)
avr_double=64
tm_defines="${tm_defines} HAVE_DOUBLE64"
;;
y64,32)
avr_double=64
avr_double_multilib=1
tm_defines="${tm_defines} HAVE_DOUBLE32"
tm_defines="${tm_defines} HAVE_DOUBLE64"
tm_defines="${tm_defines} HAVE_DOUBLE_MULTILIB"
;;
y | y32,64)
avr_double=32
avr_double_multilib=1
tm_defines="${tm_defines} HAVE_DOUBLE32"
tm_defines="${tm_defines} HAVE_DOUBLE64"
tm_defines="${tm_defines} HAVE_DOUBLE_MULTILIB"
;;
*)
echo "Error: --with-double= can only be used with: '32', '32,64', '64,32', '64'" 1>&2
exit 1
;;
esac
case y${with_long_double} in
y32)
avr_long_double=32
tm_defines="${tm_defines} HAVE_LONG_DOUBLE32"
;;
y64)
avr_long_double=64
tm_defines="${tm_defines} HAVE_LONG_DOUBLE64"
;;
y | y64,32)
avr_long_double=64
avr_long_double_multilib=1
tm_defines="${tm_defines} HAVE_LONG_DOUBLE32"
tm_defines="${tm_defines} HAVE_LONG_DOUBLE64"
tm_defines="${tm_defines} HAVE_LONG_DOUBLE_MULTILIB"
;;
y32,64)
avr_long_double=32
avr_long_double_multilib=1
tm_defines="${tm_defines} HAVE_LONG_DOUBLE32"
tm_defines="${tm_defines} HAVE_LONG_DOUBLE64"
tm_defines="${tm_defines} HAVE_LONG_DOUBLE_MULTILIB"
;;
ydouble)
avr_long_double=${avr_double}
tm_defines="${tm_defines} HAVE_LONG_DOUBLE_IS_DOUBLE"
if test y${avr_double_multilib} = y1; then
tm_defines="${tm_defines} HAVE_LONG_DOUBLE32"
tm_defines="${tm_defines} HAVE_LONG_DOUBLE64"
else
tm_defines="${tm_defines} HAVE_LONG_DOUBLE${avr_long_double}"
fi
;;
*)
echo "Error: --with-long_double= can only be used with: '32', '32,64', '64,32', '64', 'double'" 1>&2
exit 1
;;
esac
if test ${avr_long_double}x${avr_long_double_multilib}y${avr_double_multilib}z = 32xy1z; then
if test y${with_long_double} != ydouble; then
echo "Error: --with-double=${with_double} requests a multilib for double, but long double is always 32 bits wide due to --with-long-double=${with_long_double}" 1>&2
exit 1
fi
fi
if test ${avr_double}x${avr_long_double_multilib}y${avr_double_multilib}z = 64x1yz; then
echo "Error: --with-long-double=${with_long_double} requests a multilib for long double, but double is always 64 bits wide due to --with-double=64" 1>&2
exit 1
fi
if test y${avr_double}${avr_long_double} = y6432; then
echo "Error: double default of 64 bits from --with-double=${with_double} conflicts with default of 32 bits for long double from --with-long-double=${with_long_double}" 1>&2
exit 1
fi
tm_defines="${tm_defines} WITH_DOUBLE${avr_double}"
tm_defines="${tm_defines} WITH_LONG_DOUBLE${avr_long_double}"
tmake_file="${tmake_file} avr/t-avr avr/t-multilib"
use_gcc_stdint=wrap
extra_gcc_objs="driver-avr.o avr-devices.o"
extra_objs="avr-devices.o avr-log.o"
;;
bfin*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
tmake_file=bfin/t-bfin-elf
use_collect2=no
;;
bfin*-uclinux*)
tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h"
tmake_file=bfin/t-bfin-uclinux
use_collect2=no
;;
bfin*-linux-uclibc*)
tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
tmake_file="${tmake_file} bfin/t-bfin-linux"
use_collect2=no
;;
bfin*-rtems*)
tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h"
tmake_file="${tmake_file} bfin/t-rtems"
;;
bfin*-*)
tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
use_collect2=no
use_gcc_stdint=wrap
;;
bpf-*-*)
tm_file="elfos.h ${tm_file}"
tmake_file="${tmake_file} bpf/t-bpf"
use_collect2=no
extra_headers="bpf-helpers.h"
use_gcc_stdint=provide
extra_objs="coreout.o"
target_gtfiles="$target_gtfiles \$(srcdir)/config/bpf/coreout.c"
;;
cr16-*-elf)
tm_file="elfos.h ${tm_file} newlib-stdint.h"
tmake_file="${tmake_file} cr16/t-cr16 "
use_collect2=no
;;
cris-*-elf | cris-*-none)
tm_file="elfos.h newlib-stdint.h ${tm_file}"
tmake_file="cris/t-cris cris/t-elfmulti"
gas=yes
extra_options="${extra_options} cris/elf.opt"
use_gcc_stdint=wrap
;;
csky-*-*)
if test x${with_endian} != x; then
case ${with_endian} in
big|little) ;;
*)
echo "with_endian=${with_endian} not supported."
exit 1
;;
esac
fi
if test x${with_float} != x; then
case ${with_float} in
soft | hard) ;;
*) echo
"Unknown floating point type used in --with-float=$with_float"
exit 1
;;
esac
fi
tm_file="csky/csky.h"
md_file="csky/csky.md"
out_file="csky/csky.c"
tm_p_file="${tm_p_file} csky/csky-protos.h"
extra_options="${extra_options} csky/csky_tables.opt"
if test x${enable_tpf_debug} = xyes; then
tm_defines="${tm_defines} ENABLE_TPF_DEBUG"
fi
case ${target} in
csky-*-elf*)
tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} csky/csky-elf.h"
tmake_file="csky/t-csky csky/t-csky-elf"
default_use_cxa_atexit=no
use_gcc_stdint=wrap
;;
csky-*-linux*)
tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} csky/csky-linux-elf.h"
tmake_file="${tmake_file} csky/t-csky csky/t-csky-linux"
case ${target} in
csky-*-linux-gnu*)
tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
# Force .init_array support. The configure script cannot always
# automatically detect that GAS supports it, yet we require it.
gcc_cv_initfini_array=yes
;;
csky-*-linux-uclibc*)
tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
default_use_cxa_atexit=no
;;
*)
echo "Unknown target $target"
exit 1
;;
esac
;;
*)
echo "Unknown target $target"
exit 1
;;
esac
;;
epiphany-*-elf | epiphany-*-rtems*)
tm_file="${tm_file} dbxelf.h elfos.h"
tmake_file="${tmake_file} epiphany/t-epiphany"
case ${target} in
epiphany-*-rtems*)
tm_file="${tm_file} epiphany/rtems.h rtems.h newlib-stdint.h"
;;
*)
tm_file="${tm_file} newlib-stdint.h"
;;
esac
extra_options="${extra_options} fused-madd.opt"
extra_objs="${extra_objs} mode-switch-use.o resolve-sw-modes.o"
tm_defines="${tm_defines} EPIPHANY_STACK_OFFSET=${with_stack_offset:-8}"
extra_headers="epiphany_intrinsics.h"
;;
fr30-*-elf)
tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
;;
frv-*-elf)
tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
tmake_file=frv/t-frv
;;
frv-*-*linux*)
tm_file="dbxelf.h elfos.h ${tm_file} \
gnu-user.h linux.h glibc-stdint.h frv/linux.h"
tmake_file="${tmake_file} frv/t-frv frv/t-linux"
;;
ft32-*-elf)
gas=yes
gnu_ld=yes
tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
tmake_file="${tmake_file} ft32/t-ft32"
;;
amdgcn-*-amdhsa)
tm_file="elfos.h gcn/gcn-hsa.h gcn/gcn.h newlib-stdint.h"
tmake_file="gcn/t-gcn-hsa"
native_system_header_dir=/include
extra_modes=gcn/gcn-modes.def
extra_objs="${extra_objs} gcn-tree.o"
extra_gcc_objs="driver-gcn.o"
case "$host" in
x86_64*-*-linux-gnu )
if test "$ac_cv_search_dlopen" != no; then
extra_programs="${extra_programs} gcn-run\$(exeext)"
fi
;;
esac
if test x$enable_as_accelerator = xyes; then
extra_programs="${extra_programs} mkoffload\$(exeext)"
tm_file="${tm_file} gcn/offload.h"
fi
# Force .init_array support.
gcc_cv_initfini_array=yes
thread_file=gcn
;;
moxie-*-elf)
gas=yes
gnu_ld=yes
tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
tmake_file="${tmake_file} moxie/t-moxie"
;;
moxie-*-uclinux*)
gas=yes
gnu_ld=yes
tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h"
tmake_file="${tmake_file} moxie/t-moxie"
;;
moxie-*-rtems*)
tmake_file="${tmake_file} moxie/t-moxie"
tm_file="moxie/moxie.h dbxelf.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h"
;;
moxie-*-moxiebox*)
gas=yes
gnu_ld=yes
tm_file="${tm_file} dbxelf.h elfos.h moxie/moxiebox.h newlib-stdint.h"
tmake_file="${tmake_file} moxie/t-moxiebox"
;;
h8300-*-elf*)
tmake_file="h8300/t-h8300"
tm_file="h8300/h8300.h elfos.h newlib-stdint.h h8300/elf.h"
;;
h8300-*-linux*)
tmake_file="${tmake_file} h8300/t-h8300 h8300/t-linux"
tm_file="h8300/h8300.h elfos.h gnu-user.h linux.h glibc-stdint.h h8300/linux.h"
;;
hppa*64*-*-linux*)
target_cpu_default="MASK_PA_11|MASK_PA_20"
tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h gnu-user.h linux.h \
glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
pa/pa64-linux.h"
tmake_file="${tmake_file} pa/t-pa pa/t-linux"
d_target_objs="${d_target_objs} pa-d.o"
gas=yes gnu_ld=yes
;;
hppa*-*-linux*)
target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS|MASK_CALLER_COPIES"
tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \
pa/pa32-regs.h pa/pa32-linux.h"
tmake_file="${tmake_file} pa/t-pa pa/t-linux"
d_target_objs="${d_target_objs} pa-d.o"
;;
hppa*-*-openbsd*)
target_cpu_default="MASK_PA_11"
tm_file="${tm_file} dbxelf.h elfos.h openbsd.h openbsd-stdint.h openbsd-libpthread.h \
pa/pa-openbsd.h pa/pa32-regs.h pa/pa32-openbsd.h"
extra_options="${extra_options} openbsd.opt"
tmake_file="pa/t-pa"
d_target_objs="${d_target_objs} pa-d.o"
gas=yes
gnu_ld=yes
;;
hppa*-*-netbsd*)
target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file} \
pa/pa-netbsd.h pa/pa32-regs.h pa/pa32-netbsd.h"
tmake_file="${tmake_file}"
tm_defines="${tm_defines} CHAR_FAST8=1 SHORT_FAST16=1"
extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
;;
hppa[12]*-*-hpux10*)
case ${target} in
hppa1.1-*-* | hppa2*-*-*)
target_cpu_default="MASK_PA_11"
;;
esac
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
pa/pa-hpux.h pa/pa-hpux10.h"
extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux10.opt"
case ${target} in
*-*-hpux10.[1-9]*)
tm_file="${tm_file} pa/pa-hpux1010.h"
extra_options="${extra_options} pa/pa-hpux1010.opt"
;;
esac
use_gcc_stdint=provide
tm_file="${tm_file} hpux-stdint.h"
tmake_file="pa/t-pa t-slibgcc"
d_target_objs="${d_target_objs} pa-d.o"
case ${enable_threads} in
"")
if test x$have_pthread_h = xyes ; then
tmake_file="${tmake_file} pa/t-dce-thr"
fi
;;
yes | dce)
tmake_file="${tmake_file} pa/t-dce-thr"
;;
esac
use_collect2=yes
gas=yes
if test "x$with_dwarf2" != x; then
echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
dwarf2=no
fi
;;
hppa*64*-*-hpux11*)
target_cpu_default="MASK_PA_11|MASK_PA_20"
if test x$gnu_ld = xyes
then
target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
fi
tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
pa/pa-hpux11.h"
case ${target} in
*-*-hpux11.[12]*)
tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
extra_options="${extra_options} pa/pa-hpux1111.opt"
;;
*-*-hpux11.[3-9]*)
tm_file="${tm_file} pa/pa-hpux1131.h pa/pa-64.h pa/pa64-hpux.h"
extra_options="${extra_options} pa/pa-hpux1131.opt"
;;
*)
tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
;;
esac
extra_options="${extra_options} pa/pa-hpux.opt \
pa/pa-hpux1010.opt pa/pa64-hpux.opt hpux11.opt"
tmake_file="pa/t-pa t-slibgcc"
d_target_objs="${d_target_objs} pa-d.o"
case x${enable_threads} in
x | xyes | xposix )
thread_file=posix
;;
esac
gas=yes
case ${target} in
*-*-hpux11.[01]*)
use_gcc_stdint=provide
tm_file="${tm_file} hpux-stdint.h"
;;
*-*-hpux11.[23]*)
use_gcc_stdint=wrap
tm_file="${tm_file} hpux-stdint.h"
;;
esac
;;
hppa[12]*-*-hpux11*)
case ${target} in
hppa1.1-*-* | hppa2*-*-*)
target_cpu_default="MASK_PA_11"
;;
esac
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt \
hpux11.opt"
case ${target} in
*-*-hpux11.[12]*)
tm_file="${tm_file} pa/pa-hpux1111.h"
extra_options="${extra_options} pa/pa-hpux1111.opt"
;;
*-*-hpux11.[3-9]*)
tm_file="${tm_file} pa/pa-hpux1131.h"
extra_options="${extra_options} pa/pa-hpux1131.opt"
;;
esac
tmake_file="pa/t-pa t-slibgcc"
d_target_objs="${d_target_objs} pa-d.o"
case x${enable_threads} in
x | xyes | xposix )
thread_file=posix
;;
esac
use_collect2=yes
gas=yes
case ${target} in
*-*-hpux11.[01]*)
use_gcc_stdint=provide
tm_file="${tm_file} hpux-stdint.h"
;;
*-*-hpux11.[23]*)
use_gcc_stdint=wrap
tm_file="${tm_file} hpux-stdint.h"
;;
esac
if test "x$with_dwarf2" != x; then
echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
dwarf2=no
fi
;;
i[34567]86-*-darwin1[89]* | i[34567]86-*-darwin2[0-9]*)
echo "Error: 32bit target is not supported after Darwin17" 1>&2
;;
i[34567]86-*-darwin*)
need_64bit_isa=yes
# Baseline choice for a machine that allows m64 support.
with_cpu=${with_cpu:-core2}
tmake_file="${tmake_file} ${cpu_type}/t-darwin32-biarch t-slibgcc"
tm_file="${cpu_type}/darwin32-biarch.h ${tm_file} "
;;
x86_64-*-darwin1[89]* | x86_64-*-darwin2[01]*)
# Only 64b from now
tm_defines="${tm_defines} TARGET_64BIT_DEFAULT=(OPTION_MASK_ISA_64BIT|OPTION_MASK_ABI_64)"
tm_defines="${tm_defines} TARGET_BI_ARCH=0"
with_cpu=${with_cpu:-core2}
tmake_file="${tmake_file} t-slibgcc"
;;
x86_64-*-darwin*)
with_cpu=${with_cpu:-core2}
tmake_file="${tmake_file} ${cpu_type}/t-darwin64-biarch t-slibgcc"
tm_file="${cpu_type}/darwin64-biarch.h ${tm_file} "
;;
i[34567]86-*-elfiamcu)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/iamcu.h"
;;
i[34567]86-*-elf*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
;;
x86_64-*-elf*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
;;
x86_64-*-rtems*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rtemself.h rtems.h"
;;
i[34567]86-*-rdos*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/rdos.h"
;;
x86_64-*-rdos*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rdos.h i386/rdos64.h"
tmake_file="i386/t-i386elf t-svr4"
;;
i[34567]86-*-dragonfly*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h dragonfly.h dragonfly-stdint.h i386/dragonfly.h"
tmake_file="${tmake_file} i386/t-crtstuff"
;;
x86_64-*-dragonfly*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h dragonfly.h dragonfly-stdint.h i386/x86-64.h i386/dragonfly.h"
tmake_file="${tmake_file} i386/t-crtstuff"
;;
i[34567]86-*-freebsd*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
;;
x86_64-*-freebsd*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
;;
i[34567]86-*-netbsdelf*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${nbsd_tm_file} i386/netbsd-elf.h"
extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
;;
x86_64-*-netbsd*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${nbsd_tm_file} i386/x86-64.h i386/netbsd64.h"
extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
;;
i[34567]86-*-openbsd*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
extra_options="${extra_options} openbsd.opt"
gas=yes
gnu_ld=yes
;;
x86_64-*-openbsd*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/x86-64.h i386/openbsdelf.h"
extra_options="${extra_options} openbsd.opt"
gas=yes
gnu_ld=yes
;;
i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
# Intel 80386's running GNU/*
# with ELF format using glibc 2
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h"
case ${target} in
i[34567]86-*-linux*)
tm_file="${tm_file} linux.h linux-android.h"
extra_options="${extra_options} linux-android.opt"
if test x$enable_targets = xall; then
tm_file="${tm_file} i386/x86-64.h i386/gnu-user-common.h i386/gnu-user64.h i386/linux-common.h i386/linux64.h"
tm_defines="${tm_defines} TARGET_BI_ARCH=1"
tmake_file="${tmake_file} i386/t-linux64"
x86_multilibs="${with_multilib_list}"
if test "$x86_multilibs" = "default"; then
x86_multilibs="m64,m32"
fi
x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
for x86_multilib in ${x86_multilibs}; do
case ${x86_multilib} in
m32 | m64 | mx32)
TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
;;
*)
echo "--with-multilib-list=${x86_with_multilib} not supported."
exit 1
esac
done
TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
need_64bit_isa=yes
if test x$with_cpu = x; then
if test x$with_cpu_64 = x; then
with_cpu_64=generic
fi
else
case " $x86_cpus $x86_archs $x86_64_archs " in
*" $with_cpu "*)
;;
*)
echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
echo "$x86_cpus $x86_archs $x86_64_archs " 1>&2
exit 1
;;
esac
fi
else
tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h i386/linux-common.h i386/linux.h"
fi
;;
i[34567]86-*-kfreebsd*-gnu)
tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h kfreebsd-gnu.h i386/kfreebsd-gnu.h"
;;
i[34567]86-*-kopensolaris*-gnu)
tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h kopensolaris-gnu.h i386/kopensolaris-gnu.h"
;;
i[34567]86-*-gnu*)
tm_file="$tm_file i386/gnu-user-common.h i386/gnu-user.h gnu.h i386/gnu.h"
;;
esac
;;
x86_64-*-linux* | x86_64-*-kfreebsd*-gnu)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h \
i386/x86-64.h i386/gnu-user-common.h i386/gnu-user64.h"
case ${target} in
x86_64-*-linux*)
tm_file="${tm_file} linux.h linux-android.h i386/linux-common.h i386/linux64.h"
extra_options="${extra_options} linux-android.opt"
;;
x86_64-*-kfreebsd*-gnu)
tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu64.h"
;;
esac
tmake_file="${tmake_file} i386/t-linux64"
x86_multilibs="${with_multilib_list}"
if test "$x86_multilibs" = "default"; then
case ${with_abi} in
x32 | mx32)
x86_multilibs="mx32"
;;
*)
x86_multilibs="m64,m32"
;;
esac
fi
x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
for x86_multilib in ${x86_multilibs}; do
case ${x86_multilib} in
m32 | m64 | mx32)
TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
;;
*)
echo "--with-multilib-list=${x86_with_multilib} not supported."
exit 1
esac
done
TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
;;
i[34567]86-pc-msdosdjgpp*)
xm_file=i386/xm-djgpp.h
tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h i386/djgpp-stdint.h"
native_system_header_dir=/dev/env/DJDIR/include
extra_options="${extra_options} i386/djgpp.opt"
gnu_ld=yes
gas=yes
use_gcc_stdint=wrap
;;
i[34567]86-*-lynxos*)
xm_defines=POSIX
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
tmake_file="${tmake_file} t-lynx"
extra_options="${extra_options} lynx.opt"
thread_file=lynx
gnu_ld=yes
gas=yes
;;
i[34567]86-*-nto-qnx*)
tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h"
extra_options="${extra_options} i386/nto.opt"
gnu_ld=yes
gas=yes
;;
i[34567]86-*-rtems*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
tmake_file="${tmake_file} i386/t-rtems"
;;
i[34567]86-*-solaris2* | x86_64-*-solaris2*)
# Set default arch_32 to pentium4, tune_32 to generic like the other
# i386 targets, although config.guess defaults to i386-pc-solaris2*.
with_arch_32=${with_arch_32:-pentium4}
with_tune_32=${with_tune_32:-generic}
tm_file="${tm_file} i386/unix.h i386/att.h ${sol2_tm_file_head} i386/x86-64.h ${sol2_tm_file_tail}"
tm_defines="${tm_defines} TARGET_BI_ARCH=1"
tmake_file="$tmake_file i386/t-sol2"
need_64bit_isa=yes
if test x$with_cpu = x; then
if test x$with_cpu_64 = x; then
with_cpu_64=generic
fi
else
case " $x86_cpus $x86_archs $x86_64_archs " in
*" $with_cpu "*)
;;
*)
echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
echo "$x86_cpus $x86_archs $x86_64_archs" 1>&2
exit 1
;;
esac
fi
;;
i[4567]86-wrs-vxworks*|x86_64-wrs-vxworks7*)
tm_file="${tm_file} i386/unix.h i386/att.h elfos.h"
case ${target} in
x86_64-*)
need_64bit_isa=yes
tm_file="${tm_file} i386/x86-64.h"
;;
esac
tm_file="${tm_file} vx-common.h"
case ${target} in
*-vxworksae*)
tm_file="${tm_file} vxworksae.h i386/vxworks.h i386/vxworksae.h"
tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
;;
*)
tm_file="${tm_file} vxworks.h i386/vxworks.h"
tmake_file="${tmake_file} i386/t-vxworks"
;;
esac
;;
i[34567]86-*-cygwin*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
xm_file=i386/xm-cygwin.h
tmake_file="${tmake_file} i386/t-cygming t-slibgcc"
target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.c"
extra_options="${extra_options} i386/cygming.opt i386/cygwin.opt"
extra_objs="${extra_objs} winnt.o winnt-stubs.o"
c_target_objs="${c_target_objs} msformat-c.o"
cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
d_target_objs="${d_target_objs} winnt-d.o"
target_has_targetdm="yes"
if test x$enable_threads = xyes; then
thread_file='posix'
fi
default_use_cxa_atexit=yes
use_gcc_stdint=wrap
;;
x86_64-*-cygwin*)
need_64bit_isa=yes
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-w64.h i386/cygwin-stdint.h"
xm_file=i386/xm-cygwin.h
tmake_file="${tmake_file} i386/t-cygming t-slibgcc i386/t-cygwin-w64"
target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.c"
extra_options="${extra_options} i386/cygming.opt i386/cygwin.opt"
extra_objs="${extra_objs} winnt.o winnt-stubs.o"
c_target_objs="${c_target_objs} msformat-c.o"
cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
d_target_objs="${d_target_objs} winnt-d.o"
target_has_targetdm="yes"
if test x$enable_threads = xyes; then
thread_file='posix'
fi
default_use_cxa_atexit=yes
use_gcc_stdint=wrap
tm_defines="${tm_defines} TARGET_CYGWIN64=1"
;;
i[34567]86-*-mingw* | x86_64-*-mingw*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h"
xm_file=i386/xm-mingw32.h
c_target_objs="${c_target_objs} winnt-c.o"
cxx_target_objs="${cxx_target_objs} winnt-c.o"
d_target_objs="${d_target_objs} winnt-d.o"
target_has_targetcm="yes"
target_has_targetdm="yes"
case ${target} in
x86_64-*-* | *-w64-*)
need_64bit_isa=yes
;;
*)
;;
esac
if test x$enable_threads = xposix ; then
tm_file="${tm_file} i386/mingw-pthread.h"
fi
tm_file="${tm_file} i386/mingw32.h"
# This makes the logic if mingw's or the w64 feature set has to be used
case ${target} in
*-w64-*)
user_headers_inc_next_post="${user_headers_inc_next_post} float.h"
user_headers_inc_next_pre="${user_headers_inc_next_pre} stddef.h stdarg.h"
tm_file="${tm_file} i386/mingw-w64.h"
if test x$enable_targets = xall; then
tm_defines="${tm_defines} TARGET_BI_ARCH=1"
if test x$with_cpu = x; then
if test x$with_cpu_64 = x; then
with_cpu_64=generic
fi
else
case " $x86_cpus $x86_archs $x86_64_archs " in
*" $with_cpu "*)
;;
*)
echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
echo "$x86_cpus $x86_archs $x86_64_archs" 1>&2
exit 1
;;
esac
fi
fi
;;
*)
;;
esac
tm_file="${tm_file} i386/mingw-stdint.h"
tmake_file="${tmake_file} t-winnt i386/t-cygming t-slibgcc"
case ${target} in
x86_64-w64-*)
tmake_file="${tmake_file} i386/t-mingw-w64"
;;
i[34567]86-w64-*)
tmake_file="${tmake_file} i386/t-mingw-w32"
;;
esac
native_system_header_dir=/mingw/include
target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.c"
extra_options="${extra_options} i386/cygming.opt i386/mingw.opt"
case ${target} in
*-w64-*)
extra_options="${extra_options} i386/mingw-w64.opt"
;;
*)
;;
esac
extra_objs="${extra_objs} winnt.o winnt-stubs.o"
c_target_objs="${c_target_objs} msformat-c.o"
cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
gas=yes
gnu_ld=yes
default_use_cxa_atexit=yes
use_gcc_stdint=wrap
case ${enable_threads} in
"" | yes | win32)
thread_file='win32'
;;
posix)
thread_file='posix'
;;
esac
case ${target} in
*mingw32crt*)
tm_file="${tm_file} i386/crtdll.h"
;;
*mingw32msv* | *mingw*)
;;
esac
;;
x86_64-*-fuchsia*)
tmake_file="${tmake_file} i386/t-x86_64-elf"
tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h fuchsia.h"
;;
ia64*-*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
tmake_file="ia64/t-ia64"
target_cpu_default="0"
if test x$gas = xyes
then
target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
fi
if test x$gnu_ld = xyes
then
target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
fi
;;
ia64*-*-freebsd*)
tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
tmake_file="${tmake_file} ia64/t-ia64"
;;
ia64*-*-linux*)
tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
tmake_file="${tmake_file} ia64/t-ia64 ia64/t-linux t-libunwind"
target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
;;
ia64*-*-hpux*)
tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/hpux.h"
tmake_file="ia64/t-ia64 ia64/t-hpux t-slibgcc"
target_cpu_default="MASK_GNU_AS"
case x$enable_threads in
x | xyes | xposix )
thread_file=posix
;;
esac
use_collect2=no
c_target_objs="ia64-c.o"
cxx_target_objs="ia64-c.o"
extra_options="${extra_options} ia64/ilp32.opt hpux11.opt"
use_gcc_stdint=wrap
tm_file="${tm_file} hpux-stdint.h"
case ${target} in
*-*-hpux11.3*)
tm_file="${tm_file} ia64/hpux-unix2003.h"
;;
esac
;;
ia64-hp-*vms*)
tm_file="${tm_file} elfos.h ia64/sysv4.h vms/vms.h ia64/vms.h"
tmake_file="${tmake_file} ia64/t-ia64"
target_cpu_default="0"
if test x$gas = xyes
then
target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
fi
extra_options="${extra_options} ia64/vms.opt"
;;
iq2000*-*-elf*)
tm_file="elfos.h newlib-stdint.h iq2000/iq2000.h"
out_file=iq2000/iq2000.c
md_file=iq2000/iq2000.md
;;
lm32-*-elf*)
tm_file="dbxelf.h elfos.h ${tm_file} newlib-stdint.h"
tmake_file="${tmake_file} lm32/t-lm32"
;;
lm32-*-rtems*)
tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h"
tmake_file="${tmake_file} lm32/t-lm32"
tmake_file="${tmake_file} lm32/t-rtems"
;;
lm32-*-uclinux*)
tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h"
tmake_file="${tmake_file} lm32/t-lm32"
;;
m32r-*-elf*)
tm_file="elfos.h newlib-stdint.h ${tm_file}"
;;
m32rle-*-elf*)
tm_file="elfos.h newlib-stdint.h m32r/little.h ${tm_file}"
;;
m68k-*-elf* | fido-*-elf*)
case ${target} in
fido-*-elf*)
# Check that $with_cpu makes sense.
case $with_cpu in
"" | "fidoa")
;;
*)
echo "Cannot accept --with-cpu=$with_cpu"
exit 1
;;
esac
with_cpu=fidoa
;;
*)
default_m68k_cpu=68020
default_cf_cpu=5206
;;
esac
tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
tm_defines="${tm_defines} MOTOROLA=1"
tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
# Add multilibs for targets other than fido.
case ${target} in
fido-*-elf*)
;;
*)
tmake_file="$tmake_file m68k/t-mlibs"
;;
esac
;;
m68k*-*-netbsdelf*)
default_m68k_cpu=68020
default_cf_cpu=5475
tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file} m68k/netbsd-elf.h"
extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
tm_defines="${tm_defines} MOTOROLA=1 CHAR_FAST8=1 SHORT_FAST16=1"
;;
m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
# with uClibc, using the new GNU/Linux-style
# ABI.
default_m68k_cpu=68020
default_cf_cpu=5206
tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
extra_options="${extra_options} m68k/uclinux.opt"
tm_defines="${tm_defines} MOTOROLA=1"
tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
;;
m68k-*-linux*) # Motorola m68k's running GNU/Linux
# with ELF format using glibc 2
# aka the GNU/Linux C library 6.
default_m68k_cpu=68020
default_cf_cpu=5475
with_arch=${with_arch:-m68k}
tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
extra_options="${extra_options} m68k/ieee.opt"
tm_defines="${tm_defines} MOTOROLA=1"
tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
;;
m68k-*-rtems*)
default_m68k_cpu=68020
default_cf_cpu=5206
tmake_file="${tmake_file} m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff m68k/t-rtems m68k/t-mlibs"
tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
tm_defines="${tm_defines} MOTOROLA=1"
;;
mcore-*-elf)
tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
tmake_file=mcore/t-mcore
inhibit_libc=true
;;
microblaze*-linux*)
case $target in
microblazeel-*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0"
;;
microblaze-*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321"
;;
esac
tm_file="${tm_file} dbxelf.h gnu-user.h linux.h microblaze/linux.h"
tm_file="${tm_file} glibc-stdint.h"
c_target_objs="${c_target_objs} microblaze-c.o"
cxx_target_objs="${cxx_target_objs} microblaze-c.o"
tmake_file="${tmake_file} microblaze/t-microblaze"
tmake_file="${tmake_file} microblaze/t-microblaze-linux"
;;
microblaze*-*-rtems*)
case $target in
microblazeel-*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0"
;;
microblaze-*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321"
;;
esac
tm_file="${tm_file} dbxelf.h"
tm_file="${tm_file} microblaze/rtems.h rtems.h newlib-stdint.h"
c_target_objs="${c_target_objs} microblaze-c.o"
cxx_target_objs="${cxx_target_objs} microblaze-c.o"
tmake_file="${tmake_file} microblaze/t-microblaze"
tmake_file="${tmake_file} microblaze/t-rtems"
;;
microblaze*-*-elf)
case $target in
microblazeel-*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0"
;;
microblaze-*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321"
;;
esac
tm_file="${tm_file} dbxelf.h newlib-stdint.h"
c_target_objs="${c_target_objs} microblaze-c.o"
cxx_target_objs="${cxx_target_objs} microblaze-c.o"
tmake_file="${tmake_file} microblaze/t-microblaze"
;;
riscv*-*-linux*)
tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} riscv/linux.h"
case "x${enable_multilib}" in
xno) ;;
xyes) tmake_file="${tmake_file} riscv/t-linux-multilib" ;;
*) echo "Unknown value for enable_multilib"; exit 1
esac
tmake_file="${tmake_file} riscv/t-riscv riscv/t-linux"
gnu_ld=yes
gas=yes
case $target in
riscv32be-*|riscv64be-*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
;;
esac
# Force .init_array support. The configure script cannot always
# automatically detect that GAS supports it, yet we require it.
gcc_cv_initfini_array=yes
;;
riscv*-*-elf* | riscv*-*-rtems*)
tm_file="elfos.h newlib-stdint.h ${tm_file} riscv/elf.h"
case ${target} in
*-*-rtems*)
tm_file="${tm_file} riscv/rtems.h rtems.h"
tmake_file="${tmake_file} riscv/t-rtems"
;;
*)
if test "x${with_multilib_generator}" == xdefault; then
case "x${enable_multilib}" in
xno) ;;
xyes) tmake_file="${tmake_file} riscv/t-elf-multilib" ;;
*) echo "Unknown value for enable_multilib"; exit 1
esac
fi
esac
tmake_file="${tmake_file} riscv/t-riscv"
gnu_ld=yes
gas=yes
case $target in
riscv32be-*|riscv64be-*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
;;
esac
# Force .init_array support. The configure script cannot always
# automatically detect that GAS supports it, yet we require it.
gcc_cv_initfini_array=yes
;;
riscv*-*-freebsd*)
tm_file="${tm_file} elfos.h ${fbsd_tm_file} riscv/freebsd.h"
tmake_file="${tmake_file} riscv/t-riscv"
gnu_ld=yes
gas=yes
case $target in
riscv32be-*|riscv64be-*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
;;
esac
# Force .init_array support. The configure script cannot always
# automatically detect that GAS supports it, yet we require it.
gcc_cv_initfini_array=yes
;;
mips*-*-netbsd*) # NetBSD/mips, either endian.
target_cpu_default="MASK_ABICALLS"
tm_file="elfos.h ${tm_file} mips/elf.h ${nbsd_tm_file} mips/netbsd.h"
extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
;;
mips*-img-linux*)
tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h"
extra_options="${extra_options} linux-android.opt"
tmake_file="${tmake_file} mips/t-img-linux"
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6 MIPS_ABI_DEFAULT=ABI_32"
with_arch_32="mips32r6"
with_arch_64="mips64r6"
gnu_ld=yes
gas=yes
;;
mips*-mti-linux*)
tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h"
extra_options="${extra_options} linux-android.opt"
tmake_file="${tmake_file} mips/t-mti-linux"
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2 MIPS_ABI_DEFAULT=ABI_32"
with_arch_32="mips32r2"
with_arch_64="mips64r2"
gnu_ld=yes
gas=yes
;;
mips*-*-linux*) # Linux MIPS, either endian.
tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h"
extra_options="${extra_options} linux-android.opt"
case ${target} in
mipsisa32r6*)
default_mips_arch=mips32r6
;;
mipsisa32r2*)
default_mips_arch=mips32r2
;;
mipsisa32*)
default_mips_arch=mips32
;;
mips64el-st-linux-gnu)
default_mips_abi=n32
tm_file="${tm_file} mips/st.h"
tmake_file="${tmake_file} mips/t-st"
enable_mips_multilibs="yes"
;;
mips64octeon*-*-linux*)
default_mips_abi=n32
tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\""
target_cpu_default=MASK_SOFT_FLOAT_ABI
enable_mips_multilibs="yes"
;;
mipsisa64r6*-*-linux-gnuabi64)
default_mips_abi=64
default_mips_arch=mips64r6
enable_mips_multilibs="yes"
;;
mipsisa64r6*-*-linux*)
default_mips_abi=n32
default_mips_arch=mips64r6
enable_mips_multilibs="yes"
;;
mipsisa64r2*-*-linux-gnuabi64)
default_mips_abi=64
default_mips_arch=mips64r2
enable_mips_multilibs="yes"
;;
mipsisa64r2*-*-linux*)
default_mips_abi=n32
default_mips_arch=mips64r2
enable_mips_multilibs="yes"
;;
mips64*-*-linux-gnuabi64 | mipsisa64*-*-linux-gnuabi64)
default_mips_abi=64
enable_mips_multilibs="yes"
;;
mips64*-*-linux* | mipsisa64*-*-linux*)
default_mips_abi=n32
enable_mips_multilibs="yes"
;;
esac
if test x$enable_targets = xall; then
enable_mips_multilibs="yes"
fi
if test x$enable_mips_multilibs = xyes; then
tmake_file="${tmake_file} mips/t-linux64"
fi
;;
mips*-mti-elf*)
tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h mips/sde.h mips/mti-elf.h"
tmake_file="mips/t-mti-elf"
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2 MIPS_ABI_DEFAULT=ABI_32"
with_arch_32="mips32r2"
with_arch_64="mips64r2"
;;
mips*-img-elf*)
tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h mips/sde.h mips/mti-elf.h"
tmake_file="mips/t-img-elf"
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6 MIPS_ABI_DEFAULT=ABI_32"
with_arch_32="mips32r6"
with_arch_64="mips64r6"
;;
mips*-sde-elf*)
tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h mips/sde.h"
tmake_file="mips/t-sde"
extra_options="${extra_options} mips/sde.opt"
case "${with_newlib}" in
yes)
# newlib / libgloss.
;;
*)
# MIPS toolkit libraries.
tm_file="$tm_file mips/sdemtk.h"
tmake_file="$tmake_file mips/t-sdemtk"
case ${enable_threads} in
"" | yes | mipssde)
thread_file='mipssde'
;;
esac
;;
esac
case ${target} in
mipsisa32r6*)
tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6 MIPS_ABI_DEFAULT=ABI_32"
;;
mipsisa32r2*)
tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2 MIPS_ABI_DEFAULT=ABI_32"
;;
mipsisa32*)
tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32 MIPS_ABI_DEFAULT=ABI_32"
;;
mipsisa64r6*)
tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R6 MIPS_ABI_DEFAULT=ABI_N32"
;;
mipsisa64r2*)
tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R2 MIPS_ABI_DEFAULT=ABI_N32"
;;
mipsisa64*)
tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64 MIPS_ABI_DEFAULT=ABI_N32"
;;
esac
;;
mipsisa32-*-elf* | mipsisa32el-*-elf* | \
mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
mipsisa32r6-*-elf* | mipsisa32r6el-*-elf* | \
mipsisa64-*-elf* | mipsisa64el-*-elf* | \
mipsisa64r2-*-elf* | mipsisa64r2el-*-elf* | \
mipsisa64r6-*-elf* | mipsisa64r6el-*-elf*)
tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
tmake_file="mips/t-isa3264"
case ${target} in
mipsisa32r6*)
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6"
;;
mipsisa32r2*)
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2"
;;
mipsisa32*)
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32"
;;
mipsisa64r6*)
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R6"
;;
mipsisa64r2*)
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R2"
;;
mipsisa64*)
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64"
;;
esac
case ${target} in
mipsisa32*-*-elfoabi*)
tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
tm_file="${tm_file} mips/elfoabi.h"
;;
mipsisa64*-*-elfoabi*)
tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
tm_file="${tm_file} mips/elfoabi.h"
;;
*-*-elf*)
tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
;;
esac
;;
mipsisa64sr71k-*-elf*)
tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
tmake_file=mips/t-sr71k
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
;;
mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
tmake_file="mips/t-elf mips/t-sb1"
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
;;
mips-*-elf* | mipsel-*-elf* | mipsr5900-*-elf* | mipsr5900el-*-elf*)
tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
tmake_file="mips/t-elf"
;;
mips64r5900-*-elf* | mips64r5900el-*-elf*)
tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h"
tmake_file="mips/t-elf"
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3 MIPS_ABI_DEFAULT=ABI_N32"
;;
mips64-*-elf* | mips64el-*-elf*)
tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
tmake_file="mips/t-elf"
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3 MIPS_ABI_DEFAULT=ABI_O64"
;;
mips64vr-*-elf* | mips64vrel-*-elf*)
tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h"
tmake_file=mips/t-vr
tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
;;
mips64orion-*-elf* | mips64orionel-*-elf*)
tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h"
tmake_file="mips/t-elf"
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3 MIPS_ABI_DEFAULT=ABI_O64"
;;
mips*-*-rtems*)
tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
tmake_file="${tmake_file} mips/t-elf mips/t-rtems"
;;
mips-wrs-vxworks)
tm_file="elfos.h ${tm_file} mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
tmake_file="${tmake_file} mips/t-vxworks"
;;
mipstx39-*-elf* | mipstx39el-*-elf*)
tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
tmake_file="mips/t-r3900"
;;
mmix-knuth-mmixware)
tm_file="${tm_file} newlib-stdint.h"
use_gcc_stdint=wrap
;;
mn10300-*-*)
tm_file="elfos.h newlib-stdint.h ${tm_file}"
use_collect2=no
use_gcc_stdint=wrap
;;
msp430-*-*)
tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
c_target_objs="msp430-c.o"
cxx_target_objs="msp430-c.o"
tmake_file="${tmake_file} msp430/t-msp430"
extra_objs="${extra_objs} msp430-devices.o"
extra_gcc_objs="driver-msp430.o msp430-devices.o"
# Enable .init_array unless it has been explicitly disabled.
# The MSP430 EABI mandates the use of .init_array, and the Newlib CRT
# code since mid-2019 expects it.
if test x${disable_initfini_array} != xyes; then
gcc_cv_initfini_array=yes
fi
case ${target} in
msp430-*-elfbare)
# __cxa_atexit increases code size, and we don't need to support
# dynamic shared objects on MSP430, so regular Newlib atexit is a
# fine replacement as it also supports registration of more than 32
# functions.
default_use_cxa_atexit=no
# This target does not match the generic *-*-elf case above which
# sets use_gcc_stdint=wrap, so explicitly set it here.
use_gcc_stdint=wrap
;;
esac
;;
nds32*-*-*)
target_cpu_default="0"
tm_defines="${tm_defines}"
case ${target} in
nds32le*-*-*)
;;
nds32be-*-*)
target_cpu_default="${target_cpu_default}|MASK_BIG_ENDIAN"
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
;;
esac
case ${target} in
nds32*-*-elf*)
tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} nds32/elf.h nds32/nds32_intrinsic.h"
tmake_file="nds32/t-nds32 nds32/t-elf"
;;
nds32*-*-linux*)
tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h nds32/linux.h nds32/nds32_intrinsic.h"
tmake_file="${tmake_file} nds32/t-nds32 nds32/t-linux"
gcc_cv_initfini_array=yes
;;
esac
# Handle --enable-default-relax setting.
if test x${enable_default_relax} = xyes; then
tm_defines="${tm_defines} TARGET_DEFAULT_RELAX=1"
fi
# Handle --with-ext-dsp
if test x${with_ext_dsp} = xyes; then
tm_defines="${tm_defines} TARGET_DEFAULT_EXT_DSP=1"
fi
;;
nios2-*-*)
tm_file="elfos.h ${tm_file}"
tmake_file="${tmake_file} nios2/t-nios2"
case ${target} in
nios2-*-linux*)
tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h nios2/linux.h "
;;
nios2-*-elf*)
tm_file="${tm_file} newlib-stdint.h nios2/elf.h"
extra_options="${extra_options} nios2/elf.opt"
;;
nios2-*-rtems*)
tm_file="${tm_file} newlib-stdint.h nios2/rtems.h rtems.h"
tmake_file="${tmake_file} t-rtems nios2/t-rtems"
;;
esac
;;
nvptx-*)
tm_file="${tm_file} newlib-stdint.h"
use_gcc_stdint=wrap
tmake_file="nvptx/t-nvptx"
if test x$enable_as_accelerator = xyes; then
extra_programs="${extra_programs} mkoffload\$(exeext)"
tm_file="${tm_file} nvptx/offload.h"
fi
;;
or1k*-*-*)
tm_file="elfos.h ${tm_file}"
tmake_file="${tmake_file} or1k/t-or1k"
# Force .init_array support. The configure script cannot always
# automatically detect that GAS supports it, yet we require it.
gcc_cv_initfini_array=yes
# Handle --with-multilib-list=...
or1k_multilibs="${with_multilib_list}"
if test "$or1k_multilibs" = "default"; then
or1k_multilibs="mcmov,msoft-mul,msoft-div"
fi
or1k_multilibs=`echo $or1k_multilibs | sed -e 's/,/ /g'`
for or1k_multilib in ${or1k_multilibs}; do
case ${or1k_multilib} in
mcmov | msext | msfimm | \
mror | mrori | \
mhard-float | mdouble-float | munordered-float | msoft-float | \
mhard-div | mhard-mul | \
msoft-div | msoft-mul )
TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${or1k_multilib}"
;;
*)
echo "--with-multilib-list=${with_multilib_list} not supported."
exit 1
esac
done
TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
case ${target} in
or1k*-*-linux*)
tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h"
tm_file="${tm_file} or1k/linux.h"
;;
or1k*-*-elf*)
tm_file="${tm_file} newlib-stdint.h or1k/elf.h"
extra_options="${extra_options} or1k/elf.opt"
;;
or1k*-*-rtems*)
tm_file="${tm_file} newlib-stdint.h or1k/rtems.h rtems.h"
tmake_file="${tmake_file} or1k/t-rtems"
;;
esac
;;
pdp11-*-*)
tm_file="${tm_file} newlib-stdint.h"
use_gcc_stdint=wrap
;;
# port not yet contributed
#powerpc-*-openbsd*)
# tmake_file="${tmake_file} rs6000/t-fprules"
# extra_headers=
# ;;
powerpc-*-darwin*)
extra_options="${extra_options} ${cpu_type}/darwin.opt"
case ${target} in
*-darwin1[0-9]* | *-darwin9*)
tmake_file="${tmake_file} ${cpu_type}/t-darwin32-biarch"
tm_file="${tm_file} ${cpu_type}/darwin32-biarch.h"
;;
*-darwin8*)
tmake_file="${tmake_file} ${cpu_type}/t-darwin32-biarch"
tm_file="${tm_file} ${cpu_type}/darwin32-biarch.h"
;;
*-darwin7*)
tm_file="${tm_file} ${cpu_type}/darwin7.h"
;;
*-darwin[456]*)
# Earlier - ingle arch, with 32b only
# OS X 10.0, the first edition is Darwin4
;;
esac
tmake_file="${tmake_file} t-slibgcc"
;;
powerpc64-*-darwin*)
extra_options="${extra_options} ${cpu_type}/darwin.opt"
tmake_file="${tmake_file} ${cpu_type}/t-darwin64-biarch t-slibgcc"
tm_file="${tm_file} ${cpu_type}/darwin64-biarch.h"
;;
powerpc*-*-freebsd*)
tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h ${fbsd_tm_file} rs6000/sysv4.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
case ${target} in
powerpc*le-*-*)
tm_file="${tm_file} rs6000/sysv4le.h" ;;
esac
case ${target} in
powerpc64*)
tm_file="${tm_file} rs6000/default64.h rs6000/freebsd64.h"
tmake_file="${tmake_file} rs6000/t-freebsd64"
extra_options="${extra_options} rs6000/linux64.opt"
if test $fbsd_major -ge 13; then
tm_defines="${tm_defines} TARGET_FREEBSD32_SECURE_PLT=1"
fi
;;
*)
if test $fbsd_major -ge 13; then
tm_file="rs6000/secureplt.h ${tm_file}"
fi
tm_file="${tm_file} rs6000/freebsd.h"
;;
esac
;;
powerpc-*-netbsd*)
tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h ${nbsd_tm_file} freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
tmake_file="${tmake_file} rs6000/t-netbsd"
extra_options="${extra_options} rs6000/sysv4.opt"
;;
powerpc-*-eabisimaltivec*)
tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
use_gcc_stdint=wrap
;;
powerpc-*-eabisim*)
tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
use_gcc_stdint=wrap
;;
powerpc-*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
;;
powerpc-*-eabialtivec*)
tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
use_gcc_stdint=wrap
;;
powerpc-*-eabi*)
tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
use_gcc_stdint=wrap
;;
powerpc-*-rtems*)
tm_file="rs6000/biarch64.h ${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/rtems.h rtems.h"
extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-rtems rs6000/t-ppccomm"
;;
powerpc*-*-linux*)
tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h freebsd-spec.h rs6000/sysv4.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm"
extra_objs="$extra_objs rs6000-linux.o"
case ${target} in
powerpc*le-*-*)
tm_file="${tm_file} rs6000/sysv4le.h" ;;
esac
case ${target}:${with_cpu} in
powerpc64*: | powerpc64*:native) cpu_is_64bit=yes ;;
esac
maybe_biarch=${cpu_is_64bit}
case ${enable_targets} in
*powerpc64*) maybe_biarch=yes ;;
all) maybe_biarch=yes ;;
esac
case ${target}:${enable_targets}:${maybe_biarch} in
powerpc64-* | powerpc-*:*:yes | *:*powerpc64-*:yes | *:all:yes \
| powerpc64le*:*powerpcle* | powerpc64le*:*powerpc-* \
| powerpcle-*:*powerpc64le*:yes)
if test x$cpu_is_64bit = xyes; then
tm_file="${tm_file} rs6000/default64.h"
fi
tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h"
tmake_file="$tmake_file rs6000/t-linux64"
case ${target} in
powerpc*le-*-*)
tmake_file="$tmake_file rs6000/t-linux64le"
case ${enable_targets} in
all | *powerpc64-* | *powerpc-*)
tmake_file="$tmake_file rs6000/t-linux64lebe" ;;
esac ;;
*)
case ${enable_targets} in
all | *powerpc64le-* | *powerpcle-*)
tmake_file="$tmake_file rs6000/t-linux64bele" ;;
esac ;;
esac
extra_options="${extra_options} rs6000/linux64.opt"
;;
powerpc64*)
tm_file="${tm_file} rs6000/default64.h rs6000/linux64.h glibc-stdint.h"
extra_options="${extra_options} rs6000/linux64.opt"
tmake_file="${tmake_file} rs6000/t-linux"
;;
*)
tm_file="${tm_file} rs6000/linux.h glibc-stdint.h"
tmake_file="${tmake_file} rs6000/t-ppcos rs6000/t-linux"
;;
esac
case ${target} in
powerpc*-*-linux*ppc476*)
tm_file="${tm_file} rs6000/476.h"
extra_options="${extra_options} rs6000/476.opt" ;;
powerpc*-*-linux*altivec*)
tm_file="${tm_file} rs6000/linuxaltivec.h" ;;
esac
case ${target} in
*-linux*-musl*)
enable_secureplt=yes ;;
esac
if test x${enable_secureplt} = xyes; then
tm_file="rs6000/secureplt.h ${tm_file}"
fi
;;
powerpc*-wrs-vxworks7r*)
# Wind River 7 post SR0600 is mostly like Linux so we setup</