blob: 87fc65e697ad8b8838ed28ef5812ce0a87efa2a4 [file] [log] [blame]
------------------------------------------------------------------------------
-- --
-- GNAT COMPILER COMPONENTS --
-- --
-- N A M E T --
-- --
-- S p e c --
-- --
-- Copyright (C) 1992-2022, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
-- ware Foundation; either version 3, or (at your option) any later ver- --
-- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
-- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
-- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
-- for more details. You should have received a copy of the GNU General --
-- Public License distributed with GNAT; see file COPYING3. If not, go to --
-- http://www.gnu.org/licenses for a complete copy of the license. --
-- --
-- GNAT was originally developed by the GNAT team at New York University. --
-- Extensive contributions were provided by Ada Core Technologies Inc. --
-- --
------------------------------------------------------------------------------
with Alloc;
with Hostparm; use Hostparm;
with Table;
with Types; use Types;
package Namet is
-- WARNING: There is a C version of this package. Any changes to this
-- source file must be properly reflected in the C header file namet.h
-- This package contains routines for handling the names table. The table
-- is used to store character strings for identifiers and operator symbols,
-- as well as other string values such as unit names and file names.
-- The forms of the entries are as follows:
-- Identifiers Stored with upper case letters folded to lower case.
-- Upper half (16#80# bit set) and wide characters are
-- stored in an encoded form (Uhh for upper half char,
-- Whhhh for wide characters, WWhhhhhhhh as provided by
-- the routine Append_Encoded, where hh are hex
-- digits for the character code using lower case a-f).
-- Normally the use of U or W in other internal names is
-- avoided, but these letters may be used in internal
-- names (without this special meaning), if they appear
-- as the last character of the name, or they are
-- followed by an upper case letter (other than the WW
-- sequence), or an underscore.
-- Operator symbols Stored with an initial letter O, and the remainder
-- of the name is the lower case characters XXX where
-- the name is Name_Op_XXX, see Snames spec for a full
-- list of the operator names. Normally the use of O
-- in other internal names is avoided, but it may be
-- used in internal names (without this special meaning)
-- if it is the last character of the name, or if it is
-- followed by an upper case letter or an underscore.
-- Character literals Character literals have names that are used only for
-- debugging and error message purposes. The form is an
-- upper case Q followed by a single lower case letter,
-- or by a Uxx/Wxxxx/WWxxxxxxx encoding as described for
-- identifiers. The Set_Character_Literal_Name procedure
-- should be used to construct these encodings. Normally
-- the use of O in other internal names is avoided, but
-- it may be used in internal names (without this special
-- meaning) if it is the last character of the name, or
-- if it is followed by an upper case letter or an
-- underscore.
-- Unit names Stored with upper case letters folded to lower case,
-- using Uhh/Whhhh/WWhhhhhhhh encoding as described for
-- identifiers, and a %s or %b suffix for specs/bodies.
-- See package Uname for further details.
-- File names Are stored in the form provided by Osint. Typically
-- they may include wide character escape sequences and
-- upper case characters (in non-encoded form). Casing
-- is also derived from the external environment. Note
-- that file names provided by Osint must generally be
-- consistent with the names from Fname.Get_File_Name.
-- Other strings The names table is also used as a convenient storage
-- location for other variable length strings such as
-- error messages etc. There are no restrictions on what
-- characters may appear for such entries.
-- Note: the encodings Uhh (upper half characters), Whhhh (wide characters),
-- WWhhhhhhhh (wide wide characters) and Qx (character literal names) are
-- described in the spec, since they are visible throughout the system (e.g.
-- in debugging output). However, no code should depend on these particular
-- encodings, so it should be possible to change the encodings by making
-- changes only to the Namet specification (to change these comments) and the
-- body (which actually implements the encodings).
-- The names are hashed so that a given name appears only once in the table,
-- except that names entered with Name_Enter as opposed to Name_Find are
-- omitted from the hash table.
-- The first 26 entries in the names table (with Name_Id values in the range
-- First_Name_Id .. First_Name_Id + 25) represent names which are the one
-- character lower case letters in the range a-z, and these names are created
-- and initialized by the Initialize procedure.
-- Five values, one of type Int, one of type Byte, and three of type Boolean,
-- are stored with each names table entry and subprograms are provided for
-- setting and retrieving these associated values. The usage of these values
-- is up to the client:
-- In the compiler we have the following uses:
-- The Int field is used to point to a chain of potentially visible
-- entities (see Sem.Ch8 for details).
-- The Byte field is used to hold the Token_Type value for reserved words
-- (see Sem for details).
-- The Boolean1 field is used to mark address clauses to optimize the
-- performance of the Exp_Util.Following_Address_Clause function.
-- The Boolean2 field is used to mark simple names that appear in
-- Restriction[_Warning]s pragmas for No_Use_Of_Entity. This avoids most
-- unnecessary searches of the No_Use_Of_Entity table.
-- The Boolean3 field is set for names of pragmas that are to be ignored
-- because of the occurrence of a corresponding pragma Ignore_Pragma.
-- In the binder, we have the following uses:
-- The Int field is used in various ways depending on the name involved,
-- see binder documentation for details.
-- The Byte and Boolean fields are unused.
-- Note that the value of the Int and Byte fields are initialized to zero,
-- and the Boolean field is initialized to False, when a new Name table entry
-- is created.
type Bounded_String (Max_Length : Natural := 2**12) is limited
-- It's unlikely to have names longer than this. But we don't want to make
-- it too big, because we declare these on the stack in recursive routines.
record
Length : Natural := 0;
Chars : String (1 .. Max_Length);
end record;
-- To create a Name_Id, you can declare a Bounded_String as a local
-- variable, and Append things onto it, and finally call Name_Find.
-- You can also use a String, as in:
-- X := Name_Find (Some_String & "_some_suffix");
-- For historical reasons, we also have the Global_Name_Buffer below,
-- which is used by most of the code via the renamings. New code ought
-- to avoid the global.
Global_Name_Buffer : Bounded_String (Max_Length => 4 * Max_Line_Length);
Name_Buffer : String renames Global_Name_Buffer.Chars;
Name_Len : Natural renames Global_Name_Buffer.Length;
-- Note that there is some circuitry (e.g. Osint.Write_Program_Name) that
-- does a save/restore on Name_Len and Name_Buffer (1 .. Name_Len). This
-- works in part because Name_Len is default-initialized to 0.
-----------------------------
-- Types for Namet Package --
-----------------------------
-- Name_Id values are used to identify entries in the names table. Except
-- for the special values No_Name and Error_Name, they are subscript values
-- for the Names table defined in this package.
-- Note that with only a few exceptions, which are clearly documented, the
-- type Name_Id should be regarded as a private type. In particular it is
-- never appropriate to perform arithmetic operations using this type.
type Name_Id is range Names_Low_Bound .. Names_High_Bound;
for Name_Id'Size use 32;
-- Type used to identify entries in the names table
No_Name : constant Name_Id := Names_Low_Bound;
-- The special Name_Id value No_Name is used in the parser to indicate
-- a situation where no name is present (e.g. on a loop or block).
Error_Name : constant Name_Id := Names_Low_Bound + 1;
-- The special Name_Id value Error_Name is used in the parser to
-- indicate that some kind of error was encountered in scanning out
-- the relevant name, so it does not have a representable label.
First_Name_Id : constant Name_Id := Names_Low_Bound + 2;
-- Subscript of first entry in names table
subtype Valid_Name_Id is Name_Id range First_Name_Id .. Name_Id'Last;
-- All but No_Name and Error_Name
function Present (Nam : Name_Id) return Boolean;
pragma Inline (Present);
-- Determine whether name Nam exists
-----------------
-- Subprograms --
-----------------
function To_String (Buf : Bounded_String) return String;
pragma Inline (To_String);
function "+" (Buf : Bounded_String) return String renames To_String;
function Name_Find
(Buf : Bounded_String := Global_Name_Buffer) return Valid_Name_Id;
function Name_Find (S : String) return Valid_Name_Id;
-- Name_Find searches the names table to see if the string has already been
-- stored. If so, the Id of the existing entry is returned. Otherwise a new
-- entry is created with its Name_Table_Int fields set to zero/false. Note
-- that it is permissible for Buf.Length to be zero to lookup the empty
-- name string.
function Name_Enter
(Buf : Bounded_String := Global_Name_Buffer) return Valid_Name_Id;
function Name_Enter (S : String) return Valid_Name_Id;
-- Name_Enter is similar to Name_Find. The difference is that it does not
-- search the table for an existing match, and also subsequent Name_Find
-- calls using the same name will not locate the entry created by this
-- call. Thus multiple calls to Name_Enter with the same name will create
-- multiple entries in the name table with different Name_Id values. This
-- is useful in the case of created names, which are never expected to be
-- looked up. Note: Name_Enter should never be used for one character
-- names, since these are efficiently located without hashing by Name_Find
-- in any case.
function Name_Equals
(N1 : Valid_Name_Id;
N2 : Valid_Name_Id) return Boolean;
-- Return whether N1 and N2 denote the same character sequence
function Get_Name_String (Id : Valid_Name_Id) return String;
-- Returns the characters of Id as a String. The lower bound is 1.
-- The following Append procedures ignore any characters that don't fit in
-- Buf.
procedure Append (Buf : in out Bounded_String; C : Character);
-- Append C onto Buf
pragma Inline (Append);
procedure Append (Buf : in out Bounded_String; V : Nat);
-- Append decimal representation of V onto Buf
procedure Append (Buf : in out Bounded_String; S : String);
-- Append S onto Buf
procedure Append (Buf : in out Bounded_String; Buf2 : Bounded_String);
-- Append Buf2 onto Buf
procedure Append (Buf : in out Bounded_String; Id : Valid_Name_Id);
-- Append the characters of Id onto Buf. It is an error to call this with
-- one of the special name Id values (No_Name or Error_Name).
procedure Append_Decoded (Buf : in out Bounded_String; Id : Valid_Name_Id);
-- Same as Append, except that the result is decoded, so that upper half
-- characters and wide characters appear as originally found in the source
-- program text, operators have their source forms (special characters and
-- enclosed in quotes), and character literals appear surrounded by
-- apostrophes.
procedure Append_Decoded_With_Brackets
(Buf : in out Bounded_String;
Id : Valid_Name_Id);
-- Same as Append_Decoded, except that the brackets notation (Uhh
-- replaced by ["hh"], Whhhh replaced by ["hhhh"], WWhhhhhhhh replaced by
-- ["hhhhhhhh"]) is used for all non-lower half characters, regardless of
-- how Opt.Wide_Character_Encoding_Method is set, and also in that
-- characters in the range 16#80# .. 16#FF# are converted to brackets
-- notation in all cases. This routine can be used when there is a
-- requirement for a canonical representation not affected by the
-- character set options (e.g. in the binder generation of symbols).
procedure Append_Unqualified
(Buf : in out Bounded_String; Id : Valid_Name_Id);
-- Same as Append, except that qualification (as defined in unit
-- Exp_Dbug) is removed (including both preceding __ delimited names, and
-- also the suffixes used to indicate package body entities and to
-- distinguish between overloaded entities). Note that names are not
-- qualified until just before the call to gigi, so this routine is only
-- needed by processing that occurs after gigi has been called.
procedure Append_Unqualified_Decoded
(Buf : in out Bounded_String;
Id : Valid_Name_Id);
-- Same as Append_Unqualified, but decoded as for Append_Decoded
procedure Append_Encoded (Buf : in out Bounded_String; C : Char_Code);
-- Appends given character code at the end of Buf. Lower case letters and
-- digits are stored unchanged. Other 8-bit characters are stored using the
-- Uhh encoding (hh = hex code), other 16-bit wide character values are
-- stored using the Whhhh (hhhh = hex code) encoding, and other 32-bit wide
-- wide character values are stored using the WWhhhhhhhh (hhhhhhhh = hex
-- code). Note that this procedure does not fold upper case letters (they
-- are stored using the Uhh encoding).
procedure Set_Character_Literal_Name
(Buf : in out Bounded_String;
C : Char_Code);
-- This procedure sets the proper encoded name for the character literal
-- for the given character code.
procedure Insert_Str
(Buf : in out Bounded_String;
S : String;
Index : Positive);
-- Inserts S in Buf, starting at Index. Any existing characters at or past
-- this location get moved beyond the inserted string.
function Is_Internal_Name (Buf : Bounded_String) return Boolean;
procedure Get_Last_Two_Chars
(N : Valid_Name_Id;
C1 : out Character;
C2 : out Character);
-- Obtains last two characters of a name. C1 is last but one character and
-- C2 is last character. If name is less than two characters long then both
-- C1 and C2 are set to ASCII.NUL on return.
function Get_Name_Table_Boolean1 (Id : Valid_Name_Id) return Boolean;
function Get_Name_Table_Boolean2 (Id : Valid_Name_Id) return Boolean;
function Get_Name_Table_Boolean3 (Id : Valid_Name_Id) return Boolean;
-- Fetches the Boolean values associated with the given name
function Get_Name_Table_Byte (Id : Valid_Name_Id) return Byte;
pragma Inline (Get_Name_Table_Byte);
-- Fetches the Byte value associated with the given name
function Get_Name_Table_Int (Id : Valid_Name_Id) return Int;
pragma Inline (Get_Name_Table_Int);
-- Fetches the Int value associated with the given name
procedure Set_Name_Table_Boolean1 (Id : Valid_Name_Id; Val : Boolean);
procedure Set_Name_Table_Boolean2 (Id : Valid_Name_Id; Val : Boolean);
procedure Set_Name_Table_Boolean3 (Id : Valid_Name_Id; Val : Boolean);
-- Sets the Boolean value associated with the given name
procedure Set_Name_Table_Byte (Id : Valid_Name_Id; Val : Byte);
pragma Inline (Set_Name_Table_Byte);
-- Sets the Byte value associated with the given name
procedure Set_Name_Table_Int (Id : Valid_Name_Id; Val : Int);
pragma Inline (Set_Name_Table_Int);
-- Sets the Int value associated with the given name
function Is_Internal_Name (Id : Valid_Name_Id) return Boolean;
-- Returns True if the name is an internal name, i.e. contains a character
-- for which Is_OK_Internal_Letter is true, or if the name starts or ends
-- with an underscore.
--
-- Note: if the name is qualified (has a double underscore), then only the
-- final entity name is considered, not the qualifying names. Consider for
-- example that the name:
--
-- pkg__B_1__xyz
--
-- is not an internal name, because the B comes from the internal name of
-- a qualifying block, but the xyz means that this was indeed a declared
-- identifier called "xyz" within this block and there is nothing internal
-- about that name.
function Is_OK_Internal_Letter (C : Character) return Boolean;
pragma Inline (Is_OK_Internal_Letter);
-- Returns true if C is a suitable character for using as a prefix or a
-- suffix of an internally generated name, i.e. it is an upper case letter
-- other than one of the ones used for encoding source names (currently the
-- set of reserved letters is O, Q, U, W) and also returns False for the
-- letter X, which is reserved for debug output (see Exp_Dbug).
function Is_Operator_Name (Id : Valid_Name_Id) return Boolean;
-- Returns True if name given is of the form of an operator (that is, it
-- starts with an upper case O).
function Is_Valid_Name (Id : Name_Id) return Boolean;
-- True if Id is a valid name - points to a valid entry in the Name_Entries
-- table.
function Length_Of_Name (Id : Valid_Name_Id) return Nat;
pragma Inline (Length_Of_Name);
-- Returns length of given name in characters. This is the length of the
-- encoded name, as stored in the names table.
procedure Initialize;
-- This is a dummy procedure. It is retained for easy compatibility with
-- clients who used to call Initialize when this call was required. Now
-- initialization is performed automatically during package elaboration.
-- Note that this change fixes problems which existed prior to the change
-- of Initialize being called more than once. See also Reinitialize which
-- allows reinitialization of the tables.
procedure Reinitialize;
-- Clears the name tables and removes all existing entries from the table.
procedure Reset_Name_Table;
-- This procedure is used when there are multiple source files to reset the
-- name table info entries associated with current entries in the names
-- table. There is no harm in keeping the names entries themselves from one
-- compilation to another, but we can't keep the entity info, since this
-- refers to tree nodes, which are destroyed between each main source file.
procedure Finalize;
-- Called at the end of a use of the Namet package (before a subsequent
-- call to Initialize). Currently this routine is only used to generate
-- debugging output.
procedure Lock;
-- Lock name tables before calling back end. We reserve some extra space
-- before locking to avoid unnecessary inefficiencies when we unlock.
procedure Unlock;
-- Unlocks the name table to allow use of the extra space reserved by the
-- call to Lock. See gnat1drv for details of the need for this.
procedure Write_Name (Id : Valid_Name_Id);
-- Write_Name writes the characters of the specified name using the
-- standard output procedures in package Output. The name is written
-- in encoded form (i.e. including Uhh, Whhh, Qx, _op as they appear in
-- the name table). If Id is Error_Name, or No_Name, no text is output.
procedure Write_Name_Decoded (Id : Valid_Name_Id);
-- Like Write_Name, except that the name written is the decoded name, as
-- described for Append_Decoded.
function Name_Entries_Count return Nat;
-- Return current number of entries in the names table
function Last_Name_Id return Name_Id;
-- Return the last Name_Id in the table. This information is valid until
-- new names have been added.
--------------------------
-- Obsolete Subprograms --
--------------------------
-- The following routines operate on Global_Name_Buffer. New code should
-- use the routines above, and declare Bounded_Strings as local
-- variables. Existing code can be improved incrementally by removing calls
-- to the following. If we eliminate all of these, we can remove
-- Global_Name_Buffer. But be sure to look at namet.h first.
-- To see what these do, look at the bodies. They are all trivially defined
-- in terms of routines above.
procedure Add_Char_To_Name_Buffer (C : Character);
pragma Inline (Add_Char_To_Name_Buffer);
procedure Add_Nat_To_Name_Buffer (V : Nat);
procedure Add_Str_To_Name_Buffer (S : String);
procedure Get_Decoded_Name_String (Id : Valid_Name_Id);
procedure Get_Decoded_Name_String_With_Brackets (Id : Valid_Name_Id);
procedure Get_Name_String (Id : Valid_Name_Id);
procedure Get_Name_String_And_Append (Id : Valid_Name_Id);
procedure Get_Unqualified_Decoded_Name_String (Id : Valid_Name_Id);
procedure Get_Unqualified_Name_String (Id : Valid_Name_Id);
procedure Insert_Str_In_Name_Buffer (S : String; Index : Positive);
function Is_Internal_Name return Boolean;
procedure Set_Character_Literal_Name (C : Char_Code);
procedure Store_Encoded_Character (C : Char_Code);
------------------------------
-- File and Unit Name Types --
------------------------------
-- These are defined here in Namet rather than Fname and Uname to avoid
-- problems with dependencies, and to avoid dragging in Fname and Uname
-- into many more files, but it would be cleaner to move to Fname/Uname.
type File_Name_Type is new Name_Id;
-- File names are stored in the names table and this type is used to
-- indicate that a Name_Id value is being used to hold a simple file name
-- (which does not include any directory information).
No_File : constant File_Name_Type := File_Name_Type (No_Name);
-- Constant used to indicate no file is present (this is used for example
-- when a search for a file indicates that no file of the name exists).
function Present (Nam : File_Name_Type) return Boolean;
pragma Inline (Present);
-- Determine whether file name Nam exists
Error_File_Name : constant File_Name_Type := File_Name_Type (Error_Name);
-- The special File_Name_Type value Error_File_Name is used to indicate
-- a unit name where some previous processing has found an error.
subtype Error_File_Name_Or_No_File is
File_Name_Type range No_File .. Error_File_Name;
-- Used to test for either error file name or no file
type Path_Name_Type is new Name_Id;
-- Path names are stored in the names table and this type is used to
-- indicate that a Name_Id value is being used to hold a path name (that
-- may contain directory information).
No_Path : constant Path_Name_Type := Path_Name_Type (No_Name);
-- Constant used to indicate no path name is present
type Unit_Name_Type is new Name_Id;
-- Unit names are stored in the names table and this type is used to
-- indicate that a Name_Id value is being used to hold a unit name, which
-- terminates in %b for a body or %s for a spec.
No_Unit_Name : constant Unit_Name_Type := Unit_Name_Type (No_Name);
-- Constant used to indicate no file name present
function Present (Nam : Unit_Name_Type) return Boolean;
pragma Inline (Present);
-- Determine whether unit name Nam exists
Error_Unit_Name : constant Unit_Name_Type := Unit_Name_Type (Error_Name);
-- The special Unit_Name_Type value Error_Unit_Name is used to indicate
-- a unit name where some previous processing has found an error.
subtype Error_Unit_Name_Or_No_Unit_Name is
Unit_Name_Type range No_Unit_Name .. Error_Unit_Name;
------------------------
-- Debugging Routines --
------------------------
procedure wn (Id : Name_Id);
pragma Export (Ada, wn);
-- This routine is intended for debugging use only (i.e. it is intended to
-- be called from the debugger). It writes the characters of the specified
-- name using the standard output procedures in package Output, followed by
-- a new line. The name is written in encoded form (i.e. including Uhh,
-- Whhh, Qx, _op as they appear in the name table). If Id is Error_Name,
-- No_Name, or invalid an appropriate string is written (<Error_Name>,
-- <No_Name>, <invalid name>). Unlike Write_Name, this call does not affect
-- the contents of Name_Buffer or Name_Len.
private
---------------------------
-- Table Data Structures --
---------------------------
-- The following declarations define the data structures used to store
-- names. The definitions are in the private part of the package spec,
-- rather than the body, since they are referenced directly by gigi.
-- This table stores the actual string names. Although logically there is
-- no need for a terminating character (since the length is stored in the
-- name entry table), we still store a NUL character at the end of every
-- name (for convenience in interfacing to the C world).
package Name_Chars is new Table.Table (
Table_Component_Type => Character,
Table_Index_Type => Int,
Table_Low_Bound => 0,
Table_Initial => Alloc.Name_Chars_Initial,
Table_Increment => Alloc.Name_Chars_Increment,
Table_Name => "Name_Chars");
type Name_Entry is record
Name_Chars_Index : aliased Int;
-- Starting location of characters in the Name_Chars table minus one
-- (i.e. pointer to character just before first character). The reason
-- for the bias of one is that indexes in Name_Buffer are one's origin,
-- so this avoids unnecessary adds and subtracts of 1.
Name_Len : aliased Short;
-- Length of this name in characters
Byte_Info : aliased Byte;
-- Byte value associated with this name
Name_Has_No_Encodings : Boolean;
-- This flag is set True if the name entry is known not to contain any
-- special character encodings. This is used to speed up repeated calls
-- to Append_Decoded. A value of False means that it is not known
-- whether the name contains any such encodings.
Boolean1_Info : Boolean;
Boolean2_Info : Boolean;
Boolean3_Info : Boolean;
-- Boolean values associated with the name
Spare : Boolean;
-- Four remaining bits in the current byte
Hash_Link : aliased Name_Id;
-- Link to next entry in names table for same hash code
Int_Info : aliased Int;
-- Int Value associated with this name
end record;
for Name_Entry use record
Name_Chars_Index at 0 range 0 .. 31;
Name_Len at 4 range 0 .. 15;
Byte_Info at 6 range 0 .. 7;
Name_Has_No_Encodings at 7 range 0 .. 0;
Boolean1_Info at 7 range 1 .. 1;
Boolean2_Info at 7 range 2 .. 2;
Boolean3_Info at 7 range 3 .. 3;
Spare at 7 range 4 .. 7;
Hash_Link at 8 range 0 .. 31;
Int_Info at 12 range 0 .. 31;
end record;
for Name_Entry'Size use 16 * 8;
-- This ensures that we did not leave out any fields
-- This is the table that is referenced by Valid_Name_Id entries.
-- It contains one entry for each unique name in the table.
package Name_Entries is new Table.Table (
Table_Component_Type => Name_Entry,
Table_Index_Type => Valid_Name_Id'Base,
Table_Low_Bound => First_Name_Id,
Table_Initial => Alloc.Names_Initial,
Table_Increment => Alloc.Names_Increment,
Table_Name => "Name_Entries");
end Namet;