gcc/configure.in

# configure.in for GNU CC
# Process this file with autoconf to generate a configuration script.

# Copyright (C) 1997, 1998 Free Software Foundation, Inc.

#This file is part of GNU CC.

#GNU CC is free software; you can redistribute it and/or modify
#it under the terms of the GNU General Public License as published by
#the Free Software Foundation; either version 2, or (at your option)
#any later version.

#GNU CC is distributed in the hope that it will be useful,
#but WITHOUT ANY WARRANTY; without even the implied warranty of
#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#GNU General Public License for more details.

#You should have received a copy of the GNU General Public License
#along with GNU CC; see the file COPYING.  If not, write to
#the Free Software Foundation, 59 Temple Place - Suite 330,
#Boston, MA 02111-1307, USA.

# Initialization and defaults
AC_INIT(tree.c)
AC_CONFIG_HEADER(auto-host.h:config.in)

remove=rm
hard_link=ln
symbolic_link='ln -s'
copy=cp

# Check for additional parameters

# With GNU ld
AC_ARG_WITH(gnu-ld,
[  --with-gnu-ld           arrange to work with GNU ld.],
gnu_ld_flag="$with_gnu_ld",
gnu_ld_flag=no)

# With GNU as
AC_ARG_WITH(gnu-as,
[  --with-gnu-as           arrange to work with GNU as.],
gas_flag="$with_gnu_as",
gas_flag=no)

# With stabs
AC_ARG_WITH(stabs,
[  --with-stabs            arrange to use stabs instead of host debug format.],
stabs="$with_stabs",
stabs=no)

# With ELF
AC_ARG_WITH(elf,
[  --with-elf              arrange to use ELF instead of host debug format.],
elf="$with_elf",
elf=no)

# Specify the local prefix
local_prefix=
AC_ARG_WITH(local-prefix,
[  --with-local-prefix=DIR specifies directory to put local include.],
[case "${withval}" in
yes)	AC_MSG_ERROR(bad value ${withval} given for local include directory prefix) ;;
no)	;;
*)	local_prefix=$with_local_prefix ;;
esac])

# Default local prefix if it is empty
if [[ x$local_prefix = x ]]; then
	local_prefix=/usr/local
fi

gxx_include_dir=
# Specify the g++ header file directory
AC_ARG_WITH(gxx-include-dir,
[  --with-gxx-include-dir=DIR
                          specifies directory to put g++ header files.],
[case "${withval}" in
yes)	AC_MSG_ERROR(bad value ${withval} given for g++ include directory) ;;
no)	;;
*)	gxx_include_dir=$with_gxx_include_dir ;;
esac])

if test x${gxx_include_dir} = x; then
  if test x${enable_version_specific_runtime_libs} = xyes; then
    gxx_include_dir='${libsubdir}/include/g++'
  else
    gxx_include_dir='${prefix}/include/g++'
  fi
fi

# Enable expensive internal checks
AC_ARG_ENABLE(checking,
[  --enable-checking       enable expensive run-time checks.],
[case "${enableval}" in
yes)	AC_DEFINE(ENABLE_CHECKING) ;;
no)	;;
*)	AC_MSG_ERROR(bad value ${enableval} given for checking option) ;;
esac])

# Enable use of cpplib for C.
cpp_main=cccp
AC_ARG_ENABLE(c-cpplib,
[  --enable-c-cpplib       Use cpplib for C.],
if [[[ x$enable_c_cpplib != xno ]]]; then
  extra_c_objs="${extra_c_objs} cpplib.o cppexp.o cpphash.o cpperror.o"
  extra_c_objs="${extra_c_objs} prefix.o"
  extra_cxx_objs="${extra_cxx_objs} ../cpplib.o ../cppexp.o ../cpphash.o ../cpperror.o ../prefix.o"
  extra_c_flags=-DUSE_CPPLIB=1
  cpp_main=cppmain
fi)
  
# Enable Haifa scheduler.
AC_ARG_ENABLE(haifa,
[  --enable-haifa          Use the experimental scheduler.
  --disable-haifa         Don't use the experimental scheduler for the
                          targets which normally enable it.])
# Fast fixincludes
#
# This is a work in progress...
AC_ARG_WITH(fast-fixincludes,
[  --with-fast-fixincludes    Use a faster fixinclude program.  Experimental],
fast_fixinc="$with_fast_fixincludes",
fast_fixinc=no)

# Enable threads
# Pass with no value to take the default
# Pass with a value to specify a thread package
AC_ARG_ENABLE(threads,
[  --enable-threads        enable thread usage for target GCC.
  --enable-threads=LIB    use LIB thread package for target GCC.],
if [[[ x$enable_threads = xno ]]]; then
	enable_threads=''
fi,
enable_threads='')

enable_threads_flag=$enable_threads
# Check if a valid thread package
case x${enable_threads_flag} in
	x | xno)
		# No threads
		target_thread_file='single'
		;;
	xyes)
		# default
		target_thread_file=''
		;;
	xdecosf1 | xirix | xmach | xos2 | xposix | xpthreads | xsingle | \
	xsolaris | xwin32 | xdce | xvxworks)
		target_thread_file=$enable_threads_flag
		;;
	*)
		echo "$enable_threads is an unknown thread package" 1>&2
		exit 1
		;;
esac

# Determine the host, build, and target systems
AC_CANONICAL_SYSTEM

# Find the native compiler
AC_PROG_CC
AC_PROG_MAKE_SET

# Find some useful tools
AC_PROG_AWK
AC_PROG_LEX
GCC_PROG_LN
GCC_PROG_LN_S
GCC_C_VOLATILE
AC_PROG_RANLIB
AC_PROG_YACC
EGCS_PROG_INSTALL

AC_HEADER_STDC
AC_HEADER_TIME
AC_CHECK_HEADERS(limits.h stddef.h string.h strings.h stdlib.h time.h fcntl.h unistd.h stab.h sys/file.h sys/time.h sys/resource.h sys/param.h sys/times.h wait.h sys/wait.h)

# Check for thread headers.
AC_CHECK_HEADER(thread.h, [have_thread_h=yes], [have_thread_h=])
AC_CHECK_HEADER(pthread.h, [have_pthread_h=yes], [have_pthread_h=])

# See if the system preprocessor understands the ANSI C preprocessor
# stringification operator.
AC_MSG_CHECKING(whether cpp understands the stringify operator)
AC_CACHE_VAL(gcc_cv_c_have_stringify,
[AC_TRY_COMPILE(,
[#define S(x)   #x
char *test = S(foo);],
gcc_cv_c_have_stringify=yes, gcc_cv_c_have_stringify=no)])
AC_MSG_RESULT($gcc_cv_c_have_stringify)
if test $gcc_cv_c_have_stringify = yes; then
  AC_DEFINE(HAVE_CPP_STRINGIFY)
fi

# Use <inttypes.h> only if it exists,
# doesn't clash with <sys/types.h>, and declares intmax_t.
AC_MSG_CHECKING(for inttypes.h)
AC_CACHE_VAL(gcc_cv_header_inttypes_h,
[AC_TRY_COMPILE(
  [#include <sys/types.h>
#include <inttypes.h>],
  [intmax_t i = -1;],
  [AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H)
   gcc_cv_header_inttypes_h=yes],
  gcc_cv_header_inttypes_h=no)])
AC_MSG_RESULT($gcc_cv_header_inttypes_h)

AC_CHECK_FUNCS(strtoul bsearch strerror putenv popen bcopy bzero bcmp \
	index rindex strchr strrchr kill getrlimit setrlimit atoll atoq \
	sysconf isascii gettimeofday)

GCC_FUNC_VFPRINTF_DOPRNT
GCC_FUNC_PRINTF_PTR

GCC_NEED_DECLARATIONS(malloc realloc calloc free bcopy bzero bcmp \
	index rindex getenv atol sbrk abort atof strerror getcwd getwd)

GCC_NEED_DECLARATIONS(getrlimit setrlimit, [
#include <sys/types.h>
#ifdef HAVE_SYS_RESOURCE_H
#include <sys/resource.h>
#endif
])

AC_DECL_SYS_SIGLIST

# File extensions
manext='.1'
objext='.o'
AC_SUBST(manext)
AC_SUBST(objext)

build_xm_file=
build_xm_defines=
build_install_headers_dir=install-headers-tar
build_exeext=
host_xm_file=
host_xm_defines=
host_xmake_file=
host_truncate_target=
host_exeext=

# Decode the host machine, then the target machine.
# For the host machine, we save the xm_file variable as host_xm_file;
# then we decode the target machine and forget everything else
# that came from the host machine.
for machine in $build $host $target; do

	out_file=
	xmake_file=
	tmake_file=
	extra_headers=
	extra_passes=
	extra_parts=
	extra_programs=
	extra_objs=
	extra_host_objs=
	extra_gcc_objs=
	xm_defines=
	float_format=
	# Set this to force installation and use of collect2.
	use_collect2=
	# Set this to override the default target model.
	target_cpu_default=
	# Set this to control which fixincludes program to use.
	if [[ x$fast_fixinc != xyes ]] ; then
		fixincludes=fixincludes
	else fixincludes=fixinc.sh ; fi
	# Set this to control how the header file directory is installed.
	install_headers_dir=install-headers-tar
	# Set this to a non-empty list of args to pass to cpp if the target
	# wants its .md file passed through cpp.
	md_cppflags=
	# Set this if directory names should be truncated to 14 characters.
	truncate_target=
	# Set this if gdb needs a dir command with `dirname $out_file`
	gdb_needs_out_file_path=
	# Set this if the build machine requires executables to have a
	# file name suffix.
	exeext=
	# Set this to control which thread package will be used.
	thread_file=
	# Reinitialize these from the flag values every loop pass, since some
	# configure entries modify them.
	gas="$gas_flag"
	gnu_ld="$gnu_ld_flag"
	enable_threads=$enable_threads_flag

	# Set default cpu_type, tm_file and xm_file so it can be updated in
	# each machine entry.
	cpu_type=`echo $machine | sed 's/-.*$//'`
	case $machine in
	alpha*-*-*)
		cpu_type=alpha
		;;
	arm*-*-*)
		cpu_type=arm
		;;
	c*-convex-*)
		cpu_type=convex
		;;
	i[[34567]]86-*-*)
		cpu_type=i386
		;;
	hppa*-*-*)
		cpu_type=pa
		;;
	m68000-*-*)
		cpu_type=m68k
		;;
	mips*-*-*)
		cpu_type=mips
		;;
	powerpc*-*-*)
		cpu_type=rs6000
		;;
	pyramid-*-*)
		cpu_type=pyr
		;;
	sparc*-*-*)
		cpu_type=sparc
		;;
	esac

	tm_file=${cpu_type}/${cpu_type}.h
	xm_file=${cpu_type}/xm-${cpu_type}.h
	
	# Set the default macros to define for GNU/Linux systems.
	case $machine in
	*-*-linux-gnu*)
		xm_defines="HAVE_ATEXIT POSIX BSTRING"
		;;
	esac

	case $machine in
	# Support site-specific machine types.
	*local*)
		cpu_type=`echo $machine | sed -e 's/-.*//'`
		rest=`echo $machine | sed -e "s/$cpu_type-//"`
		xm_file=${cpu_type}/xm-$rest.h
		tm_file=${cpu_type}/$rest.h
		if [[ -f $srcdir/config/${cpu_type}/x-$rest ]] ; \
		then xmake_file=${cpu_type}/x-$rest; \
		else true; \
		fi
		if [[ -f $srcdir/config/${cpu_type}/t-$rest ]] ; \
		then tmake_file=${cpu_type}/t-$rest; \
		else true; \
		fi
		;;
	1750a-*-*)
		;;
	a29k-*-bsd* | a29k-*-sym1*)
		tm_file="${tm_file} a29k/unix.h"
		xm_defines=USG
		xmake_file=a29k/x-unix
		use_collect2=yes
		;;
	a29k-*-udi | a29k-*-coff)
		tm_file="${tm_file} dbxcoff.h a29k/udi.h"
		tmake_file=a29k/t-a29kbare
		;;
	a29k-wrs-vxworks*)
		tm_file="${tm_file} dbxcoff.h a29k/udi.h a29k/vx29k.h"
		tmake_file=a29k/t-vx29k
		extra_parts="crtbegin.o crtend.o"
		thread_file='vxworks'
		;;
	a29k-*-*)			# Default a29k environment.
		use_collect2=yes
		;;
	alpha*-*-linux-gnuecoff*)
		tm_file="${tm_file} alpha/linux-ecoff.h alpha/linux.h"
		target_cpu_default="MASK_GAS"
		gas=no
		xmake_file=none
		gas=yes gnu_ld=yes
		;;
	alpha*-*-linux-gnulibc1*)
		tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
		target_cpu_default="MASK_GAS"
		tmake_file="t-linux t-linux-gnulibc1 alpha/t-linux alpha/t-crtbe"
		extra_parts="crtbegin.o crtend.o"
		fixincludes=fixinc.wrap
		xmake_file=none
		gas=yes gnu_ld=yes
 		if [[ x$enable_threads = xyes ]]; then
 			thread_file='posix'
 		fi
		;;
	alpha*-*-linux-gnu*)
		tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
		target_cpu_default="MASK_GAS"
		tmake_file="t-linux alpha/t-linux alpha/t-crtbe"
		extra_parts="crtbegin.o crtend.o"
		xmake_file=none
		fixincludes=Makefile.in
		gas=yes gnu_ld=yes
 		if [[ x$enable_threads = xyes ]]; then
 			thread_file='posix'
 		fi
		;;
	alpha*-*-netbsd*)
		tm_file="${tm_file} alpha/elf.h alpha/netbsd.h alpha/netbsdl-elf.h"
		xm_file="xm-netbsd.h ${xm_file}"
		target_cpu_default="MASK_GAS"
		tmake_file="alpha/t-crtbe"
		extra_parts="crtbegin.o crtend.o"
		xmake_file=none
		fixincludes=fixinc.wrap
		gas=yes gnu_ld=yes
		;;
		
	alpha*-dec-osf*)
		if [[ x$stabs = xyes ]]
		then
			tm_file="${tm_file} dbx.h"
		fi
		if [[ x$gas != xyes ]]
		then
			extra_passes="mips-tfile mips-tdump"
		fi
		use_collect2=yes
		case $machine in
		  *-*-osf1*)
		    tm_file="${tm_file} alpha/osf.h alpha/osf12.h alpha/osf2or3.h"
		    ;;
		  *-*-osf[[23]]*)
		    tm_file="${tm_file} alpha/osf.h alpha/osf2or3.h"
		    ;;
		  *-*-osf4*)
		    tm_file="${tm_file} alpha/osf.h"
		    # Some versions of OSF4 (specifically X4.0-9 296.7) have
		    # a broken tar, so we use cpio instead.
		    install_headers_dir=install-headers-cpio
		    ;;
		esac
		case $machine in
		  *-*-osf4.0[[b-z]] | *-*-osf4.[[1-9]]*)
		    target_cpu_default=MASK_SUPPORT_ARCH
		    ;;
		esac
		;;
 	alpha*-*-vxworks*)
		tm_file="${tm_file} dbx.h alpha/vxworks.h"
		if [ x$gas != xyes ]
		then
			extra_passes="mips-tfile mips-tdump"
		fi
		use_collect2=yes
		;;
	alpha*-*-winnt*)
		tm_file="${tm_file} alpha/win-nt.h"
		xm_file="${xm_file} config/winnt/xm-winnt.h alpha/xm-winnt.h"
		tmake_file=t-libc-ok
		xmake_file=winnt/x-winnt
		extra_host_objs=oldnames.o
		extra_gcc_objs="spawnv.o oldnames.o"
		fixincludes=fixinc.winnt
		if [[ x$gnu_ld != xyes ]]
		then
			extra_programs=ld.exe
		fi
 		if [[ x$enable_threads = xyes ]]; then
			thread_file='win32'
		fi
		;;
	alpha*-dec-vms*)
		tm_file=alpha/vms.h
		xm_file="${xm_file} alpha/xm-vms.h"
		tmake_file=alpha/t-vms
		fixincludes=Makefile.in
		;;
	arc-*-elf*)
		extra_parts="crtinit.o crtfini.o"
		;;
	arm-*-coff* | armel-*-coff*)
		tm_file=arm/coff.h
		tmake_file=arm/t-bare
		;;
	arm-*-riscix1.[[01]]*)		# Acorn RISC machine (early versions)
		tm_file=arm/riscix1-1.h
		use_collect2=yes
		;;
	arm-*-riscix*)			# Acorn RISC machine
		if [[ x$gas = xyes ]]
		then
		    tm_file=arm/rix-gas.h
		else
		    tm_file=arm/riscix.h
		fi
		xmake_file=arm/x-riscix
		tmake_file=arm/t-riscix
		use_collect2=yes
		;;
	arm-semi-aout | armel-semi-aout)
		tm_file=arm/semi.h
		tmake_file=arm/t-semi
		fixincludes=Makefile.in # There is nothing to fix
		;;
	arm-semi-aof | armel-semi-aof)
		tm_file=arm/semiaof.h
		tmake_file=arm/t-semiaof
		fixincludes=Makefile.in # There is nothing to fix
		;;
	arm*-*-netbsd*)
		tm_file=arm/netbsd.h
		xm_file="xm-netbsd.h ${xm_file}"
		tmake_file="t-netbsd arm/t-netbsd"
		# On NetBSD, the headers are already okay, except for math.h.
		fixincludes=fixinc.wrap
		;;
	arm-*-linux-gnuaout*)		# ARM GNU/Linux
		cpu_type=arm
		xmake_file=x-linux
		tm_file=arm/linux-gas.h
		tmake_file=arm/t-linux
		fixincludes=Makefile.in
		gnu_ld=yes
		;;
	arm-*-aout)
		tm_file=arm/aout.h
		tmake_file=arm/t-bare
		;;
	c1-convex-*)			# Convex C1
		target_cpu_default=1
		use_collect2=yes
		fixincludes=Makefile.in
		;;
	c2-convex-*)			# Convex C2
		target_cpu_default=2
		use_collect2=yes
		fixincludes=Makefile.in
		;;
	c32-convex-*)
		target_cpu_default=4
		use_collect2=yes
		fixincludes=Makefile.in
		;;
	c34-convex-*)
		target_cpu_default=8
		use_collect2=yes
		fixincludes=Makefile.in
		;;
	c38-convex-*)
		target_cpu_default=16		
		use_collect2=yes
		fixincludes=Makefile.in
		;;
	clipper-intergraph-clix*)
		tm_file="${tm_file} svr3.h clipper/clix.h"
		xm_file=clipper/xm-clix.h
		xmake_file=clipper/x-clix
		extra_headers=va-clipper.h
		extra_parts="crtbegin.o crtend.o"
		install_headers_dir=install-headers-cpio
		;;
	dsp16xx-*)
		;;
	elxsi-elxsi-*)
		use_collect2=yes
		;;
# This hasn't been upgraded to GCC 2.
#	fx80-alliant-*)			# Alliant FX/80
#		;;
	h8300-*-*)
		float_format=i32
		;;
	hppa1.1-*-pro*)
		tm_file="pa/pa-pro.h ${tm_file} pa/pa-pro-end.h libgloss.h"
		xm_file=pa/xm-papro.h
		tmake_file=pa/t-pro
		;;
	hppa1.1-*-osf*)
		target_cpu_default=1
		tm_file="${tm_file} pa/pa-osf.h"
		use_collect2=yes
		fixincludes=Makefile.in
		;;
	hppa1.1-*-rtems*)
		tm_file="pa/pa-pro.h ${tm_file} pa/pa-pro-end.h libgloss.h pa/rtems.h"
		xm_file=pa/xm-papro.h
		tmake_file=pa/t-pro
		;;
	hppa1.0-*-osf*)
		tm_file="${tm_file} pa/pa-osf.h"
		use_collect2=yes
		fixincludes=Makefile.in
		;;
	hppa1.1-*-bsd*)
		target_cpu_default=1
		use_collect2=yes
		fixincludes=Makefile.in
		;;
	hppa1.0-*-bsd*)
		use_collect2=yes
		fixincludes=Makefile.in
		;;
	hppa1.0-*-hpux7*)
		tm_file="pa/pa-oldas.h ${tm_file} pa/pa-hpux7.h"
		xm_file=pa/xm-pahpux.h
		xmake_file=pa/x-pa-hpux
		if [[ x$gas = xyes ]]
		then
			tm_file="${tm_file} pa/gas.h"
		fi
		install_headers_dir=install-headers-cpio
		use_collect2=yes
		;;
	hppa1.0-*-hpux8.0[[0-2]]*)
		tm_file="${tm_file} pa/pa-hpux.h"
		xm_file=pa/xm-pahpux.h
		xmake_file=pa/x-pa-hpux
		if [[ x$gas = xyes ]]
		then
			tm_file="${tm_file} pa/pa-gas.h"
		else
			tm_file="pa/pa-oldas.h ${tm_file}"
		fi
		install_headers_dir=install-headers-cpio
		use_collect2=yes
		;;
	hppa1.1-*-hpux8.0[[0-2]]*)
		target_cpu_default=1
		tm_file="${tm_file} pa/pa-hpux.h"
		xm_file=pa/xm-pahpux.h
		xmake_file=pa/x-pa-hpux
		if [[ x$gas = xyes ]]
		then
			tm_file="${tm_file} pa/pa-gas.h"
		else
			tm_file="pa/pa-oldas.h ${tm_file}"
		fi
		install_headers_dir=install-headers-cpio
		use_collect2=yes
		;;
	hppa1.1-*-hpux8*)
		target_cpu_default=1
		tm_file="${tm_file} pa/pa-hpux.h"
		xm_file=pa/xm-pahpux.h
		xmake_file=pa/x-pa-hpux
		if [[ x$gas = xyes ]]
		then
			tm_file="${tm_file} pa/pa-gas.h"
		fi
		install_headers_dir=install-headers-cpio
		use_collect2=yes
		;;
	hppa1.0-*-hpux8*)
		tm_file="${tm_file} pa/pa-hpux.h"
		xm_file=pa/xm-pahpux.h
		xmake_file=pa/x-pa-hpux
		if [[ x$gas = xyes ]]
		then
			tm_file="${tm_file} pa/pa-gas.h"
		fi
		install_headers_dir=install-headers-cpio
		use_collect2=yes
		;;
	hppa1.1-*-hpux10*)
		target_cpu_default=1
		tm_file="${tm_file} pa/pa-hpux.h pa/pa-hpux10.h"
		xm_file=pa/xm-pahpux.h
		xmake_file=pa/x-pa-hpux
		tmake_file=pa/t-pa
		if [[ x$gas = xyes ]]
		then
			tm_file="${tm_file} pa/pa-gas.h"
		fi
		if [[ x$enable_threads = x ]]; then
		    enable_threads=$have_pthread_h
		fi
 		if [[ x$enable_threads = xyes ]]; then
			thread_file='dce'
			tmake_file="${tmake_file} pa/t-dce-thr"
		fi
		install_headers_dir=install-headers-cpio
		use_collect2=yes
		;;
	hppa1.0-*-hpux10*)
		tm_file="${tm_file} pa/pa-hpux.h pa/pa-hpux10.h"
		xm_file=pa/xm-pahpux.h
		xmake_file=pa/x-pa-hpux
		if [[ x$gas = xyes ]]
		then
			tm_file="${tm_file} pa/pa-gas.h"
		fi
		if [[ x$enable_threads = x ]]; then
		    enable_threads=$have_pthread_h
		fi
 		if [[ x$enable_threads = xyes ]]; then
			thread_file='dce'
			tmake_file="${tmake_file} pa/t-dce-thr"
		fi
		install_headers_dir=install-headers-cpio
		use_collect2=yes
		;;
	hppa1.1-*-hpux*)
		target_cpu_default=1
		tm_file="${tm_file} pa/pa-hpux.h pa/pa-hpux9.h"
		xm_file=pa/xm-pahpux.h
		xmake_file=pa/x-pa-hpux
		if [[ x$gas = xyes ]]
		then
			tm_file="${tm_file} pa/pa-gas.h"
		fi
		install_headers_dir=install-headers-cpio
		use_collect2=yes
		;;
	hppa1.0-*-hpux*)
		tm_file="${tm_file} pa/pa-hpux.h pa/pa-hpux9.h"
		xm_file=pa/xm-pahpux.h
		xmake_file=pa/x-pa-hpux
		if [[ x$gas = xyes ]]
		then
			tm_file="${tm_file} pa/pa-gas.h"
		fi
		install_headers_dir=install-headers-cpio
		use_collect2=yes
		;;
	hppa1.1-*-hiux*)
		target_cpu_default=1
		tm_file="${tm_file} pa/pa-hpux.h pa/pa-hiux.h"
		xm_file=pa/xm-pahpux.h
		xmake_file=pa/x-pa-hpux
		if [[ x$gas = xyes ]]
		then
			tm_file="${tm_file} pa/pa-gas.h"
		fi
		install_headers_dir=install-headers-cpio
		use_collect2=yes
		;;
	hppa1.0-*-hiux*)
		tm_file="${tm_file} pa/pa-hpux.h pa/pa-hiux.h"
		xm_file=pa/xm-pahpux.h
		xmake_file=pa/x-pa-hpux
		if [[ x$gas = xyes ]]
		then
			tm_file="${tm_file} pa/pa-gas.h"
		fi
		install_headers_dir=install-headers-cpio
		use_collect2=yes
		;;
	hppa*-*-lites*)
		target_cpu_default=1
		use_collect2=yes
		fixincludes=Makefile.in
		;;
	i370-*-mvs*)
		;;
	i[[34567]]86-ibm-aix*)		# IBM PS/2 running AIX
                if [[ x$gas = xyes ]]
		then
			tm_file=i386/aix386.h
			extra_parts="crtbegin.o crtend.o"
			tmake_file=i386/t-crtstuff
		else
			tm_file=i386/aix386ng.h
			use_collect2=yes
		fi
		xm_file="xm-alloca.h i386/xm-aix.h ${xm_file}"
		xm_defines=USG
		xmake_file=i386/x-aix
		;;
	i[[34567]]86-ncr-sysv4*)	# NCR 3000 - ix86 running system V.4
		xm_file="xm-siglist.h xm-alloca.h ${xm_file}"
		xm_defines="USG POSIX SMALL_ARG_MAX"
		xmake_file=i386/x-ncr3000
		if [[ x$stabs = xyes -a x$gas = xyes ]]
		then
			tm_file=i386/sysv4gdb.h
		else
			tm_file=i386/sysv4.h
		fi
		extra_parts="crtbegin.o crtend.o"
		tmake_file=i386/t-crtpic
		;;
	i[[34567]]86-next-*)
		tm_file=i386/next.h
		xm_file=i386/xm-next.h
		tmake_file=i386/t-next
		xmake_file=i386/x-next
		extra_objs=nextstep.o
 		if [[ x$enable_threads = xyes ]]; then
			thread_file='mach'
		fi
		;;
	i[[34567]]86-sequent-bsd*) 		# 80386 from Sequent
		use_collect2=yes
		if [[ x$gas = xyes ]]
		then
			tm_file=i386/seq-gas.h
		else
			tm_file=i386/sequent.h
		fi
		;;
	i[[34567]]86-sequent-ptx1*)
		xm_defines="USG SVR3"
		xmake_file=i386/x-sysv3
		tm_file=i386/seq-sysv3.h
		tmake_file=i386/t-crtstuff
		fixincludes=fixinc.ptx
		extra_parts="crtbegin.o crtend.o"
		install_headers_dir=install-headers-cpio
		;;
	i[[34567]]86-sequent-ptx2* | i[[34567]]86-sequent-sysv3*)
		xm_defines="USG SVR3"
		xmake_file=i386/x-sysv3
		tm_file=i386/seq2-sysv3.h
		tmake_file=i386/t-crtstuff
		extra_parts="crtbegin.o crtend.o"
		fixincludes=fixinc.ptx
		install_headers_dir=install-headers-cpio
		;;
	i[[34567]]86-sequent-ptx4* | i[[34567]]86-sequent-sysv4*)
		xm_file="xm-siglist.h xm-alloca.h ${xm_file}"
		xm_defines="USG POSIX SMALL_ARG_MAX"
		xmake_file=x-svr4
		tm_file=i386/ptx4-i.h
		tmake_file=t-svr4
		extra_parts="crtbegin.o crtend.o"
		fixincludes=fixinc.ptx
		install_headers_dir=install-headers-cpio
		;;
	i386-sun-sunos*)		# Sun i386 roadrunner
		xm_defines=USG
		tm_file=i386/sun.h
		use_collect2=yes
		;;
	i[[34567]]86-wrs-vxworks*)
		tm_file=i386/vxi386.h
		tmake_file=i386/t-i386bare
		;;
	i[[34567]]86-*-aout*)
		tm_file=i386/i386-aout.h
		tmake_file=i386/t-i386bare
		;;
	i[[34567]]86-*-bsdi* | i[[34567]]86-*-bsd386*)
		tm_file=i386/bsd386.h
#		tmake_file=t-libc-ok
		;;
	i[[34567]]86-*-bsd*)
		tm_file=i386/386bsd.h
#		tmake_file=t-libc-ok
# Next line turned off because both 386BSD and BSD/386 use GNU ld.
#		use_collect2=yes
		;;
	i[[34567]]86-*-freebsdelf*)
		tm_file="i386/i386.h i386/att.h linux.h i386/freebsd-elf.h i386/perform.h"
		# On FreeBSD, the headers are already ok, except for math.h.
		fixincludes=fixinc.wrap
		tmake_file=i386/t-freebsd
		gas=yes
		gnu_ld=yes
		stabs=yes
		;;
	i[[34567]]86-*-freebsd*)
		tm_file=i386/freebsd.h
		# On FreeBSD, the headers are already ok, except for math.h.
		fixincludes=fixinc.wrap
		tmake_file=i386/t-freebsd
		;;
	i[[34567]]86-*-netbsd*)
		tm_file=i386/netbsd.h
		xm_file="xm-netbsd.h ${xm_file}"
		# On NetBSD, the headers are already okay, except for math.h.
		fixincludes=fixinc.wrap
		tmake_file=t-netbsd
		;;
	i[[34567]]86-*-coff*)
		tm_file=i386/i386-coff.h
		tmake_file=i386/t-i386bare
		;;
	i[[34567]]86-*-isc*)		# 80386 running ISC system
		xm_file="${xm_file} i386/xm-isc.h"
		xm_defines="USG SVR3"
		case $machine in
		  i[[34567]]86-*-isc[[34]]*)
		    xmake_file=i386/x-isc3
		    ;;
		  *)
		    xmake_file=i386/x-isc
		    ;;
		esac
                if [[ x$gas = xyes -a x$stabs = xyes ]]
		then
			tm_file=i386/iscdbx.h
			tmake_file=i386/t-svr3dbx
			extra_parts="svr3.ifile svr3z.ifile"
		else
			tm_file=i386/isccoff.h
			tmake_file=i386/t-crtstuff
			extra_parts="crtbegin.o crtend.o"
		fi
		install_headers_dir=install-headers-cpio
		;;
	i[[34567]]86-*-linux-gnuoldld*)	# Intel 80386's running GNU/Linux
					# with a.out format using
					# pre BFD linkers
		xmake_file=x-linux-aout
		tmake_file="t-linux-aout i386/t-crtstuff"
		tm_file=i386/linux-oldld.h
		fixincludes=Makefile.in #On Linux, the headers are ok already.
		gnu_ld=yes
		float_format=i386
		;;
	i[[34567]]86-*-linux-gnuaout*)	# Intel 80386's running GNU/Linux
					# with a.out format
		xmake_file=x-linux-aout
		tmake_file="t-linux-aout i386/t-crtstuff"
		tm_file=i386/linux-aout.h
		fixincludes=Makefile.in #On Linux, the headers are ok already.
		gnu_ld=yes
		float_format=i386
		;;
	i[[34567]]86-*-linux-gnulibc1)	# Intel 80386's running GNU/Linux
					# with ELF format using the
					# GNU/Linux C library 5
		xmake_file=x-linux	
		tm_file=i386/linux.h	
		tmake_file="t-linux t-linux-gnulibc1 i386/t-crtstuff"
		extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
		fixincludes=Makefile.in #On Linux, the headers are ok already.
		gnu_ld=yes
		float_format=i386
 		if [[ x$enable_threads = xyes ]]; then
 			thread_file='single'
 		fi
		;;
	i[[34567]]86-*-linux-gnu*)	# Intel 80386's running GNU/Linux
					# with ELF format using glibc 2
					# aka GNU/Linux C library 6
		xmake_file=x-linux
		tm_file=i386/linux.h
		tmake_file="t-linux i386/t-crtstuff"
		extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
		fixincludes=Makefile.in #On Linux, the headers are ok already.
		gnu_ld=yes
		float_format=i386
 		if [[ x$enable_threads = xyes ]]; then
 			thread_file='posix'
 		fi
		;;
	i[[34567]]86-*-gnu*)
		;;
	i[[34567]]86-go32-msdos | i[[34567]]86-*-go32*)
		xm_file=i386/xm-go32.h
		tm_file=i386/go32.h
		tmake_file=i386/t-go32
		;;
	i[[34567]]86-pc-msdosdjgpp*)
		xm_file=i386/xm-go32.h
		tm_file=i386/go32.h
		tmake_file=i386/t-go32
		gnu_ld=yes
		gas=yes
		;;
	i[[34567]]86-moss-msdos* | i[[34567]]86-*-moss*)
		tm_file=i386/moss.h
		tmake_file=t-libc-ok
		fixincludes=Makefile.in
		gnu_ld=yes
		gas=yes
		;;
	i[[34567]]86-*-lynxos*)
		if [[ x$gas = xyes ]]
		then
			tm_file=i386/lynx.h
		else
			tm_file=i386/lynx-ng.h
		fi
		xm_file=i386/xm-lynx.h
		tmake_file=i386/t-i386bare
		xmake_file=x-lynx
		;;
	i[[34567]]86-*-mach*)
		tm_file=i386/mach.h
#		tmake_file=t-libc-ok
		use_collect2=yes
		;;
	i[[34567]]86-*-osfrose*)		# 386 using OSF/rose
                if [[ x$elf = xyes ]]
		then
			tm_file=i386/osfelf.h
			use_collect2=
		else
			tm_file=i386/osfrose.h
			use_collect2=yes
		fi
		xm_file="i386/xm-osf.h ${xm_file}"
		xmake_file=i386/x-osfrose
		tmake_file=i386/t-osf
		extra_objs=halfpic.o
		;;
	i[[34567]]86-go32-rtems*)
		cpu_type=i386
		xm_file=i386/xm-go32.h
		tm_file=i386/go32-rtems.h
		tmake_file="i386/t-go32 t-rtems"
		;;
	i[[34567]]86-*-rtemself*)
		cpu_type=i386
		tm_file=i386/rtemself.h
		tmake_file="i386/t-i386bare t-rtems"
		;;
	i[[34567]]86-*-rtems*)
		cpu_type=i386
		tm_file=i386/rtems.h
		tmake_file="i386/t-i386bare t-rtems"
		;;
	i[[34567]]86-*-sco3.2v5*)	# 80386 running SCO Open Server 5
		xm_file="xm-siglist.h xm-alloca.h ${xm_file} i386/xm-sco5.h"
		xm_defines="USG SVR3"
		xmake_file=i386/x-sco5
		fixincludes=fixinc.sco
		install_headers_dir=install-headers-cpio
		tm_file=i386/sco5.h
		if [[ x$gas = xyes ]]
		then
			tm_file="i386/sco5gas.h ${tm_file}"
			tmake_file=i386/t-sco5gas
		else
			tmake_file=i386/t-sco5
		fi
		extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
		;;
	i[[34567]]86-*-sco3.2v4*) 	# 80386 running SCO 3.2v4 system
		xm_file="${xm_file} i386/xm-sco.h"
		xm_defines="USG SVR3 BROKEN_LDEXP SMALL_ARG_MAX NO_SYS_SIGLIST"
		xmake_file=i386/x-sco4
		fixincludes=fixinc.sco
		install_headers_dir=install-headers-cpio
                if [[ x$stabs = xyes ]]
		then
			tm_file=i386/sco4dbx.h
			tmake_file=i386/t-svr3dbx
			extra_parts="svr3.ifile svr3z.rfile"
		else
			tm_file=i386/sco4.h
			tmake_file=i386/t-crtstuff
			extra_parts="crtbegin.o crtend.o"
		fi
		truncate_target=yes
		;;
	i[[34567]]86-*-sco*)	 	# 80386 running SCO system
		xm_file=i386/xm-sco.h
		xmake_file=i386/x-sco
		install_headers_dir=install-headers-cpio
                if [[ x$stabs = xyes ]]
		then
			tm_file=i386/scodbx.h
			tmake_file=i386/t-svr3dbx
			extra_parts="svr3.ifile svr3z.rfile"
		else
			tm_file=i386/sco.h
			extra_parts="crtbegin.o crtend.o"
			tmake_file=i386/t-crtstuff
		fi
		truncate_target=yes
		;;
	i[[34567]]86-*-solaris2*)
		xm_file="xm-siglist.h xm-alloca.h ${xm_file}"
		xm_defines="USG POSIX SMALL_ARG_MAX"
		if [[ x$stabs = xyes ]]
		then
			tm_file=i386/sol2dbg.h
		else
			tm_file=i386/sol2.h
		fi
		tmake_file=i386/t-sol2
		extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
		xmake_file=x-svr4
		case $machine in
		*-*-solaris2.[[0-4]])
			fixincludes=fixinc.svr4;;
		*)
			fixincludes=fixinc.wrap;;
		esac
 		if [[ x$enable_threads = xyes ]]; then
			thread_file='solaris'
		fi
		;;
       i[[34567]]86-*-sysv5*)           # Intel x86 on System V Release 5
               xm_file="xm-alloca.h xm-siglist.h ${xm_file}"
               xm_defines="USG POSIX"
               tm_file=i386/sysv4.h
               if [[ x$stabs = xyes ]]
               then
                       tm_file="${tm_file} dbx.h"
               fi
               tmake_file=i386/t-crtpic
               xmake_file=x-svr4
               extra_parts="crtbegin.o crtend.o"
               fixincludes=Makefile.in # The headers are just fine, thank you.
               ;;
	i[[34567]]86-*-sysv4*)		# Intel 80386's running system V.4
		xm_file="xm-siglist.h xm-alloca.h ${xm_file}"
		xm_defines="USG POSIX SMALL_ARG_MAX"
		tm_file=i386/sysv4.h
		if [[ x$stabs = xyes ]]
		then
			tm_file="${tm_file} dbx.h"
		fi
		tmake_file=i386/t-crtpic
		xmake_file=x-svr4
		extra_parts="crtbegin.o crtend.o"
		;;
	i[[34567]]86-*-osf1*)		# Intel 80386's running OSF/1 1.3+
		cpu_type=i386
		xm_file="${xm_file} xm-svr4.h i386/xm-sysv4.h i386/xm-osf1elf.h"
		xm_defines="USE_C_ALLOCA SMALL_ARG_MAX"
		fixincludes=Makefile.in #Don't do it on OSF/1
		if [[ x$stabs = xyes ]]
		then
			tm_file=i386/osf1elfgdb.h
		else
			tm_file=i386/osf1elf.h
		fi
		tmake_file=i386/t-osf1elf
		xmake_file=i386/x-osf1elf
		extra_parts="crti.o crtn.o crtbegin.o crtend.o"
		;;
	i[[34567]]86-*-sysv*)		# Intel 80386's running system V
		xm_defines="USG SVR3"
		xmake_file=i386/x-sysv3
		if [[ x$gas = xyes ]]
		then
			if [[ x$stabs = xyes ]]
			then
				tm_file=i386/svr3dbx.h
				tmake_file=i386/t-svr3dbx
				extra_parts="svr3.ifile svr3z.rfile"
			else
				tm_file=i386/svr3gas.h
				extra_parts="crtbegin.o crtend.o"
				tmake_file=i386/t-crtstuff
			fi
		else
			tm_file=i386/sysv3.h
			extra_parts="crtbegin.o crtend.o"
			tmake_file=i386/t-crtstuff
		fi
		;;
	i386-*-vsta)			# Intel 80386's running VSTa kernel
		xm_file="${xm_file} i386/xm-vsta.h"
		tm_file=i386/vsta.h
		tmake_file=i386/t-vsta
		xmake_file=i386/x-vsta
		;;
	i[[34567]]86-*-pe | i[[34567]]86-*-cygwin32)
		xm_file="${xm_file} i386/xm-cygwin32.h"
		tmake_file=i386/t-cygwin32
		tm_file=i386/cygwin32.h
		xmake_file=i386/x-cygwin32
		extra_objs=winnt.o
		fixincludes=Makefile.in
 		if [[ x$enable_threads = xyes ]]; then
			thread_file='win32'
		fi
		exeext=.exe
		;;
	i[[34567]]86-*-mingw32*)
		tm_file=i386/mingw32.h
		xm_file="${xm_file} i386/xm-mingw32.h"
		tmake_file="i386/t-cygwin32 i386/t-mingw32"
		extra_objs=winnt.o
		xmake_file=i386/x-cygwin32
		fixincludes=Makefile.in
 		if [[ x$enable_threads = xyes ]]; then
			thread_file='win32'
		fi
		exeext=.exe
		case $machine in
			*mingw32msv*)
				;;
			*mingw32crt* | *mingw32*)
				tm_file="${tm_file} i386/crtdll.h"
				;;
		esac
		;;
	i[[34567]]86-*-winnt3*)
		tm_file=i386/win-nt.h
		out_file=i386/i386.c
		xm_file="xm-winnt.h ${xm_file}"
		xmake_file=winnt/x-winnt
		tmake_file=i386/t-winnt
		extra_host_objs="winnt.o oldnames.o"
		extra_gcc_objs="spawnv.o oldnames.o"
		fixincludes=fixinc.winnt
		if [[ x$gnu_ld != xyes ]]
		then
			extra_programs=ld.exe
		fi
 		if [[ x$enable_threads = xyes ]]; then
			thread_file='win32'
		fi
		;;
	i[[34567]]86-dg-dgux*)
		xm_file="xm-alloca.h xm-siglist.h ${xm_file}"
		xm_defines="USG POSIX"
		out_file=i386/dgux.c
		tm_file=i386/dgux.h
		tmake_file=i386/t-dgux
		xmake_file=i386/x-dgux
		fixincludes=fixinc.dgux
		install_headers_dir=install-headers-cpio
              ;;
	i860-alliant-*)		# Alliant FX/2800
		tm_file="${tm_file} svr4.h i860/sysv4.h i860/fx2800.h"
		xm_file="${xm_file}"
		xmake_file=i860/x-fx2800
		tmake_file=i860/t-fx2800
		extra_parts="crtbegin.o crtend.o"
		;;
	i860-*-bsd*)
		tm_file="${tm_file} i860/bsd.h"
		if [[ x$gas = xyes ]]
		then
			tm_file="${tm_file} i860/bsd-gas.h"
		fi
		use_collect2=yes
		;;
	i860-*-mach*)
		tm_file="${tm_file} i860/mach.h"
		tmake_file=t-libc-ok
		;;
	i860-*-osf*)			# Intel Paragon XP/S, OSF/1AD
		tm_file="${tm_file} svr3.h i860/paragon.h"
		xm_defines="USG SVR3"
		tmake_file=t-osf
		;;
	i860-*-sysv3*)
		tm_file="${tm_file} svr3.h i860/sysv3.h"
		xm_defines="USG SVR3"
		xmake_file=i860/x-sysv3
		extra_parts="crtbegin.o crtend.o"
		;;
	i860-*-sysv4*)
		tm_file="${tm_file} svr4.h i860/sysv4.h"
		xm_defines="USG SVR3"
		xmake_file=i860/x-sysv4
		tmake_file=t-svr4
		extra_parts="crtbegin.o crtend.o"
		;;
	i960-wrs-vxworks5 | i960-wrs-vxworks5.0*)
		tm_file="${tm_file} i960/vx960.h"
		tmake_file=i960/t-vxworks960
		use_collect2=yes
		thread_file='vxworks'
		;;
	i960-wrs-vxworks5* | i960-wrs-vxworks)
		tm_file="${tm_file} dbxcoff.h i960/i960-coff.h i960/vx960-coff.h"
		tmake_file=i960/t-vxworks960
		use_collect2=yes
		thread_file='vxworks'
		;;
	i960-wrs-vxworks*)
		tm_file="${tm_file} i960/vx960.h"
		tmake_file=i960/t-vxworks960
		use_collect2=yes
		thread_file='vxworks'
		;;
	i960-*-coff*)
		tm_file="${tm_file} dbxcoff.h i960/i960-coff.h libgloss.h"
		tmake_file=i960/t-960bare
		use_collect2=yes
		;;
	i960-*-rtems)
		tmake_file="i960/t-960bare t-rtems"
		tm_file="${tm_file} dbxcoff.h i960/rtems.h"
		use_collect2=yes
		;;
	i960-*-*)			# Default i960 environment.
		use_collect2=yes
		;;
	m32r-*-elf*)
		extra_parts="crtinit.o crtfini.o"
		;;
	m68000-convergent-sysv*)
		tm_file=m68k/ctix.h
		xm_file="m68k/xm-3b1.h ${xm_file}"
		xm_defines=USG
		use_collect2=yes
		extra_headers=math-68881.h
		;;
	m68000-hp-bsd*)			# HP 9000/200 running BSD
		tm_file=m68k/hp2bsd.h
		xmake_file=m68k/x-hp2bsd
		use_collect2=yes
		extra_headers=math-68881.h
		;;
	m68000-hp-hpux*)		# HP 9000 series 300
		xm_file="xm_alloca.h ${xm_file}"
		xm_defines="USG NO_SYS_SIGLIST"
		if [[ x$gas = xyes ]]
		then
			xmake_file=m68k/x-hp320g
			tm_file=m68k/hp310g.h
		else
			xmake_file=m68k/x-hp320
			tm_file=m68k/hp310.h
		fi
		install_headers_dir=install-headers-cpio
		use_collect2=yes
		extra_headers=math-68881.h
		;;
	m68000-sun-sunos3*)
		tm_file=m68k/sun2.h
		use_collect2=yes
		extra_headers=math-68881.h
		;;
	m68000-sun-sunos4*)
		tm_file=m68k/sun2o4.h
		use_collect2=yes
		extra_headers=math-68881.h
		;;
	m68000-att-sysv*)
		xm_file="m68k/xm-3b1.h ${xm_file}"
		xm_defines=USG
		if [[ x$gas = xyes ]]
		then
			tm_file=m68k/3b1g.h
		else
			tm_file=m68k/3b1.h
		fi
		use_collect2=yes
		extra_headers=math-68881.h
		;;
	m68k-apple-aux*)		# Apple Macintosh running A/UX
		xm_defines="USG AUX"
		tmake_file=m68k/t-aux
		install_headers_dir=install-headers-cpio
		extra_headers=math-68881.h
		extra_parts="crt1.o mcrt1.o maccrt1.o crt2.o crtn.o"
		tm_file=
		if [[ "$gnu_ld" = yes ]]
		then
			tm_file="${tm_file} m68k/auxgld.h"
		else
			tm_file="${tm_file} m68k/auxld.h"
		fi
		if [[ "$gas" = yes ]]
		then
			tm_file="${tm_file} m68k/auxgas.h"
		else
			tm_file="${tm_file} m68k/auxas.h"
		fi
		tm_file="${tm_file} m68k/a-ux.h"
		float_format=m68k
		;;
	m68k-apollo-*)
		tm_file=m68k/apollo68.h
		xmake_file=m68k/x-apollo68
		use_collect2=yes
		extra_headers=math-68881.h
		float_format=m68k
		;;
	m68k-altos-sysv*)		   # Altos 3068
		if [[ x$gas = xyes ]]
		then
		        tm_file=m68k/altos3068.h
			xm_defines=USG
		else
			echo "The Altos is supported only with the GNU assembler" 1>&2
			exit 1
		fi
		extra_headers=math-68881.h
	        ;;
	m68k-bull-sysv*)		# Bull DPX/2
		if [[ x$gas = xyes ]]
		then
			if [[ x$stabs = xyes ]]
			then
				tm_file=m68k/dpx2cdbx.h
			else
				tm_file=m68k/dpx2g.h
			fi
		else
			tm_file=m68k/dpx2.h
		fi
		xm_file="xm-alloca.h ${xm_file}"
		xm_defines=USG
		xmake_file=m68k/x-dpx2
		use_collect2=yes
		extra_headers=math-68881.h
		;;
	m68k-atari-sysv4*)              # Atari variant of V.4.
		tm_file=m68k/atari.h
		xm_file="xm-alloca.h ${xm_file}"
		xm_defines="USG FULL_PROTOTYPES"
		tmake_file=t-svr4
		extra_parts="crtbegin.o crtend.o"
		extra_headers=math-68881.h
		float_format=m68k
		;;
	m68k-motorola-sysv*)
		tm_file=m68k/mot3300.h
		xm_file="xm-alloca.h m68k/xm-mot3300.h ${xm_file}"
		xm_defines=NO_SYS_SIGLIST
		if [[ x$gas = xyes ]]
		then
			xmake_file=m68k/x-mot3300-gas
			if [[ x$gnu_ld = xyes ]]
			then
				tmake_file=m68k/t-mot3300-gald
			else
				tmake_file=m68k/t-mot3300-gas
				use_collect2=yes
			fi
		else
			xmake_file=m68k/x-mot3300
			if [[ x$gnu_ld = xyes ]]
			then
				tmake_file=m68k/t-mot3300-gld
			else
				tmake_file=m68k/t-mot3300
				use_collect2=yes
			fi
		fi
		gdb_needs_out_file_path=yes
		extra_parts="crt0.o mcrt0.o"
		extra_headers=math-68881.h
		float_format=m68k
		;;
	m68k-ncr-sysv*)			# NCR Tower 32 SVR3
		tm_file=m68k/tower-as.h
		xm_defines="USG SVR3"
		xmake_file=m68k/x-tower
		extra_parts="crtbegin.o crtend.o"
		extra_headers=math-68881.h
		;;
        m68k-plexus-sysv*)
		tm_file=m68k/plexus.h
		xm_file="xm-alloca.h m68k/xm-plexus.h ${xm_file}"
		xm_defines=USG
		use_collect2=yes
		extra_headers=math-68881.h
		;;
	m68k-tti-*)
		tm_file=m68k/pbb.h
		xm_file="xm-alloca.h ${xm_file}"
		xm_defines=USG
		extra_headers=math-68881.h
		;;
	m68k-crds-unos*)
		xm_file="xm-alloca.h m68k/xm-crds.h ${xm_file}"
		xm_defines="USG unos"
		xmake_file=m68k/x-crds
		tm_file=m68k/crds.h
		use_collect2=yes
		extra_headers=math-68881.h
		;;
	m68k-cbm-sysv4*)		# Commodore variant of V.4.
		tm_file=m68k/amix.h
		xm_file="xm-alloca.h ${xm_file}"
		xm_defines="USG FULL_PROTOTYPES"
		xmake_file=m68k/x-amix
		tmake_file=t-svr4
		extra_parts="crtbegin.o crtend.o"
		extra_headers=math-68881.h
		float_format=m68k
		;;
	m68k-ccur-rtu)
		tm_file=m68k/ccur-GAS.h
		xmake_file=m68k/x-ccur
		extra_headers=math-68881.h
		use_collect2=yes
		float_format=m68k
		;;
	m68k-hp-bsd4.4*)		# HP 9000/3xx running 4.4bsd
		tm_file=m68k/hp3bsd44.h
		xmake_file=m68k/x-hp3bsd44
		use_collect2=yes
		extra_headers=math-68881.h
		float_format=m68k
		;;
	m68k-hp-bsd*)			# HP 9000/3xx running Berkeley Unix
		tm_file=m68k/hp3bsd.h
		use_collect2=yes
		extra_headers=math-68881.h
		float_format=m68k
		;;
	m68k-isi-bsd*)
		if [[ x$with_fp = xno ]]
		then
			tm_file=m68k/isi-nfp.h
		else
			tm_file=m68k/isi.h
			float_format=m68k
		fi
		use_collect2=yes
		extra_headers=math-68881.h
		;;
	m68k-hp-hpux7*)	# HP 9000 series 300 running HPUX version 7.
		xm_file="xm_alloca.h ${xm_file}"
		xm_defines="USG NO_SYS_SIGLIST"
		if [[ x$gas = xyes ]]
		then
			xmake_file=m68k/x-hp320g
			tm_file=m68k/hp320g.h
		else
			xmake_file=m68k/x-hp320
			tm_file=m68k/hpux7.h
		fi
		install_headers_dir=install-headers-cpio
		use_collect2=yes
		extra_headers=math-68881.h
		float_format=m68k
		;;
	m68k-hp-hpux*)	# HP 9000 series 300
		xm_file="xm_alloca.h ${xm_file}"
		xm_defines="USG NO_SYS_SIGLIST"
		if [[ x$gas = xyes ]]
		then
			xmake_file=m68k/x-hp320g
			tm_file=m68k/hp320g.h
		else
			xmake_file=m68k/x-hp320
			tm_file=m68k/hp320.h
		fi
		install_headers_dir=install-headers-cpio
		use_collect2=yes
		extra_headers=math-68881.h
		float_format=m68k
		;;
	m68k-sun-mach*)
		tm_file=m68k/sun3mach.h
		use_collect2=yes
		extra_headers=math-68881.h
		float_format=m68k
		;;
	m68k-sony-newsos3*)
		if [[ x$gas = xyes ]]
		then
			tm_file=m68k/news3gas.h
		else
			tm_file=m68k/news3.h
		fi
		use_collect2=yes
		extra_headers=math-68881.h
		float_format=m68k
		;;
	m68k-sony-bsd* | m68k-sony-newsos*)
		if [[ x$gas = xyes ]]
		then
			tm_file=m68k/newsgas.h
		else
			tm_file=m68k/news.h
		fi
		use_collect2=yes
		extra_headers=math-68881.h
		float_format=m68k
		;;
	m68k-next-nextstep2*)
		tm_file=m68k/next21.h
		xm_file="m68k/xm-next.h ${xm_file}"
		tmake_file=m68k/t-next
		xmake_file=m68k/x-next
		extra_objs=nextstep.o
		extra_headers=math-68881.h
		use_collect2=yes
		float_format=m68k
                ;;
	m68k-next-nextstep3*)
		tm_file=m68k/next.h
		xm_file="m68k/xm-next.h ${xm_file}"
		tmake_file=m68k/t-next
		xmake_file=m68k/x-next
		extra_objs=nextstep.o
		extra_headers=math-68881.h
		float_format=m68k
 		if [[ x$enable_threads = xyes ]]; then
			thread_file='mach'
		fi
		;;
	m68k-sun-sunos3*)
		if [[ x$with_fp = xno ]]
		then
			tm_file=m68k/sun3n3.h
		else
			tm_file=m68k/sun3o3.h
			float_format=m68k
		fi
		use_collect2=yes
		extra_headers=math-68881.h
		;;
	m68k-sun-sunos*)			# For SunOS 4 (the default).
		if [[ x$with_fp = xno ]]
		then
			tm_file=m68k/sun3n.h
		else
			tm_file=m68k/sun3.h
			float_format=m68k
		fi
		use_collect2=yes
		extra_headers=math-68881.h
		;;
	m68k-wrs-vxworks*)
		tm_file=m68k/vxm68k.h
		tmake_file=m68k/t-vxworks68
		extra_headers=math-68881.h
		thread_file='vxworks'
		float_format=m68k
		;;
	m68k-*-aout*)
		tmake_file=m68k/t-m68kbare
		tm_file="m68k/m68k-aout.h libgloss.h"
		extra_headers=math-68881.h
		float_format=m68k
		;;
	m68k-*-coff*)
		tmake_file=m68k/t-m68kbare
		tm_file="m68k/m68k-coff.h dbx.h libgloss.h"
		extra_headers=math-68881.h
		float_format=m68k
		;;
	m68k-*-lynxos*)
		if [[ x$gas = xyes ]]
		then
			tm_file=m68k/lynx.h
		else
			tm_file=m68k/lynx-ng.h
		fi
		xm_file=m68k/xm-lynx.h
		xmake_file=x-lynx
		tmake_file=m68k/t-lynx
		extra_headers=math-68881.h
		float_format=m68k
		;;
	m68k*-*-netbsd*)
		tm_file=m68k/netbsd.h
		xm_file="xm-netbsd.h ${xm_file}"
		# On NetBSD, the headers are already okay, except for math.h.
		fixincludes=fixinc.wrap
		tmake_file=t-netbsd
		float_format=m68k
		;;
	m68k-*-sysv3*)			# Motorola m68k's running system V.3
		xm_file="xm-alloca.h ${xm_file}"
		xm_defines=USG
		xmake_file=m68k/x-m68kv
		extra_parts="crtbegin.o crtend.o"
		extra_headers=math-68881.h
		float_format=m68k
		;;
	m68k-*-sysv4*)			# Motorola m68k's running system V.4
		tm_file=m68k/m68kv4.h
		xm_file="xm-alloca.h ${xm_file}"
		xm_defines=USG
		tmake_file=t-svr4
		extra_parts="crtbegin.o crtend.o"
		extra_headers=math-68881.h
		float_format=m68k
		;;
	m68k-*-linux-gnuaout*)		# Motorola m68k's running GNU/Linux
					# with a.out format
		xmake_file=x-linux
		tm_file=m68k/linux-aout.h
		tmake_file="t-linux-aout m68k/t-linux-aout"
		fixincludes=Makefile.in # The headers are ok already.
		extra_headers=math-68881.h
		float_format=m68k
		gnu_ld=yes
		;;
	m68k-*-linux-gnulibc1)		# Motorola m68k's running GNU/Linux
					# with ELF format using the
					# GNU/Linux C library 5
		xmake_file=x-linux
		tm_file=m68k/linux.h
		tmake_file="t-linux t-linux-gnulibc1 m68k/t-linux"
		extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
		fixincludes=Makefile.in # The headers are ok already.
		extra_headers=math-68881.h
		float_format=m68k
		gnu_ld=yes
		;;
	m68k-*-linux-gnu*)		# Motorola m68k's running GNU/Linux
					# with ELF format using glibc 2
					# aka the GNU/Linux C library 6.
		xmake_file=x-linux
		tm_file=m68k/linux.h
		tmake_file="t-linux m68k/t-linux"
		extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
		fixincludes=Makefile.in # The headers are ok already.
		extra_headers=math-68881.h
		float_format=m68k
		gnu_ld=yes
		if [[ x$enable_threads = xyes ]]; then
			thread_file='posix'
		fi
		;;
	m68k-*-psos*)
		tmake_file=m68k/t-m68kbare
		tm_file=m68k/m68k-psos.h
		extra_headers=math-68881.h
		float_format=m68k
		;;
	m68k-*-rtems*)
		tmake_file="m68k/t-m68kbare t-rtems"
		tm_file=m68k/rtems.h
		extra_headers=math-68881.h
		float_format=m68k
		;;

	m88k-dg-dgux*)
		case $machine in
		  m88k-dg-dguxbcs*)
		    tm_file=m88k/dguxbcs.h
		    tmake_file=m88k/t-dguxbcs
		    ;;
		  *)
		    tm_file=m88k/dgux.h
		    tmake_file=m88k/t-dgux
		    ;;
		esac
		extra_parts="crtbegin.o bcscrtbegin.o crtend.o m88kdgux.ld"
		xmake_file=m88k/x-dgux
		if [[ x$gas = xyes ]]
		then
			tmake_file=m88k/t-dgux-gas
		fi
		fixincludes=fixinc.dgux
		;;
	m88k-dolphin-sysv3*)
		tm_file=m88k/dolph.h
		extra_parts="crtbegin.o crtend.o"
		xm_file="m88k/xm-sysv3.h ${xm_file}"
		xmake_file=m88k/x-dolph
		if [[ x$gas = xyes ]]
		then
			tmake_file=m88k/t-m88k-gas
		fi
		;;
	m88k-tektronix-sysv3)
		tm_file=m88k/tekXD88.h
		extra_parts="crtbegin.o crtend.o"
		xm_file="m88k/xm-sysv3.h ${xm_file}"
		xmake_file=m88k/x-tekXD88
		if [[ x$gas = xyes ]]
		then
			tmake_file=m88k/t-m88k-gas
		fi
		;;
	m88k-*-aout*)
		tm_file=m88k/m88k-aout.h
		;;
	m88k-*-coff*)
		tm_file=m88k/m88k-coff.h
		tmake_file=m88k/t-bug
		;;
	m88k-*-luna*)
		tm_file=m88k/luna.h
		extra_parts="crtbegin.o crtend.o"
		if [[ x$gas = xyes ]]
		then
			tmake_file=m88k/t-luna-gas
		else
			tmake_file=m88k/t-luna
		fi
		;;
	m88k-*-sysv3*)
		tm_file=m88k/sysv3.h
		extra_parts="crtbegin.o crtend.o"
		xm_file="m88k/xm-sysv3.h ${xm_file}"
		xmake_file=m88k/x-sysv3
		if [[ x$gas = xyes ]]
		then
			tmake_file=m88k/t-m88k-gas
		fi
		;;
	m88k-*-sysv4*)
		tm_file=m88k/sysv4.h
		extra_parts="crtbegin.o crtend.o"
		xmake_file=m88k/x-sysv4
		tmake_file=m88k/t-sysv4
		;;
	mips-sgi-irix6*)		# SGI System V.4., IRIX 6
		tm_file=mips/iris6.h
		xm_file=mips/xm-iris6.h
		fixincludes=fixinc.irix
		xmake_file=mips/x-iris6
		tmake_file=mips/t-iris6
 		if [[ x$enable_threads = xyes ]]; then
: not ported yet	thread_file='irix'
		fi
		;;
	mips-wrs-vxworks)
		tm_file="mips/elf.h libgloss.h"
 		tmake_file=mips/t-ecoff
 		gas=yes
		gnu_ld=yes
 		extra_parts="crtbegin.o crtend.o"
#		thread_file='vxworks'
 		;;
	mips-sgi-irix5cross64)		# Irix5 host, Irix 6 target, cross64
		tm_file="mips/iris6.h mips/cross64.h"
		xm_defines=USG
		xm_file="mips/xm-iris5.h"
		fixincludes=Makefile.in
		xmake_file=mips/x-iris
		tmake_file=mips/t-cross64
		# See comment in mips/iris[56].h files.
		use_collect2=yes
 		if [[ x$enable_threads = xyes ]]; then
: not ported yet	thread_file='irix'
		fi
		;;
        mips-sni-sysv4)
		if [[ x$gas = xyes ]]
		then
			if [[ x$stabs = xyes ]]
			then
				tm_file=mips/iris5gdb.h
			else
				tm_file="mips/sni-svr4.h mips/sni-gas.h"
			fi
		else
			tm_file=mips/sni-svr4.h
		fi
		xm_defines=USG
                xmake_file=mips/x-sni-svr4
                tmake_file=mips/t-mips-gas
                if [[ x$gnu_ld != xyes ]]
                then
                        use_collect2=yes
                fi
                ;;
	mips-sgi-irix5*)		# SGI System V.4., IRIX 5
		if [[ x$gas = xyes ]]
		then
			tm_file="mips/iris5.h mips/iris5gas.h"
			if [[ x$stabs = xyes ]]
			then
				tm_file="${tm_file} dbx.h"
			fi
		else
			tm_file=mips/iris5.h
		fi
		xm_defines=USG
		xm_file="mips/xm-iris5.h"
		fixincludes=fixinc.irix
		xmake_file=mips/x-iris
		# mips-tfile doesn't work yet
		tmake_file=mips/t-mips-gas
		# See comment in mips/iris5.h file.
		use_collect2=yes
 		if [[ x$enable_threads = xyes ]]; then
: not ported yet	thread_file='irix'
		fi
		;;
	mips-sgi-irix4loser*)		# Mostly like a MIPS.
		tm_file="mips/iris4loser.h mips/iris3.h ${tm_file} mips/iris4.h"
		if [[ x$stabs = xyes ]]; then
			tm_file="${tm_file} dbx.h"
		fi
		xm_defines=USG
		xmake_file=mips/x-iris
		if [[ x$gas = xyes ]]
		then
			tmake_file=mips/t-mips-gas
		else
			extra_passes="mips-tfile mips-tdump"
		fi
		if [[ x$gnu_ld != xyes ]]
		then
			use_collect2=yes
		fi
 		if [[ x$enable_threads = xyes ]]; then
: not ported yet	thread_file='irix'
		fi
		;;
	mips-sgi-irix4*)		# Mostly like a MIPS.
		tm_file="mips/iris3.h ${tm_file} mips/iris4.h"
		if [[ x$stabs = xyes ]]; then
			tm_file="${tm_file} dbx.h"
		fi
		xm_defines=USG
		xmake_file=mips/x-iris
		if [[ x$gas = xyes ]]
		then
			tmake_file=mips/t-mips-gas
		else
			extra_passes="mips-tfile mips-tdump"
		fi
		if [[ x$gnu_ld != xyes ]]
		then
			use_collect2=yes
		fi
 		if [[ x$enable_threads = xyes ]]; then
: not ported yet	thread_file='irix'
		fi
		;;
	mips-sgi-*)			# Mostly like a MIPS.
		tm_file="mips/iris3.h ${tm_file}"
		if [[ x$stabs = xyes ]]; then
			tm_file="${tm_file} dbx.h"
		fi
		xm_defines=USG
		xmake_file=mips/x-iris3
		if [[ x$gas = xyes ]]
		then
			tmake_file=mips/t-mips-gas
		else
			extra_passes="mips-tfile mips-tdump"
		fi
		if [[ x$gnu_ld != xyes ]]
		then
			use_collect2=yes
		fi
		;;
	mips-dec-osfrose*)		# Decstation running OSF/1 reference port with OSF/rose.
		tm_file="mips/osfrose.h ${tm_file}"
		xmake_file=mips/x-osfrose
		tmake_file=mips/t-osfrose
		extra_objs=halfpic.o
		use_collect2=yes
		;;
	mips-dec-osf*)			# Decstation running OSF/1 as shipped by DIGITAL
		tm_file=mips/dec-osf1.h
		if [[ x$stabs = xyes ]]; then
			tm_file="${tm_file} dbx.h"
		fi
		xmake_file=mips/x-dec-osf1
		if [[ x$gas = xyes ]]
		then
			tmake_file=mips/t-mips-gas
		else
			tmake_file=mips/t-ultrix
			extra_passes="mips-tfile mips-tdump"
		fi
		if [[ x$gnu_ld != xyes ]]
		then
			use_collect2=yes
		fi
		;;
	mips-dec-bsd*)                  # Decstation running 4.4 BSD
              tm_file=mips/dec-bsd.h
              fixincludes=
	      if [[ x$gas = xyes ]]
	      then
		   	tmake_file=mips/t-mips-gas
	      else
			tmake_file=mips/t-ultrix
			extra_passes="mips-tfile mips-tdump"
	      fi
	      if [[ x$gnu_ld != xyes ]]
	      then
			use_collect2=yes
	      fi
	      ;;
	mipsel-*-netbsd* | mips-dec-netbsd*)    # Decstation running NetBSD
		tm_file=mips/netbsd.h
		xm_file="xm-netbsd.h ${xm_file}"
		# On NetBSD, the headers are already okay, except for math.h.
		fixincludes=fixinc.wrap
		tmake_file=t-netbsd
		;;
	mips-sony-bsd* | mips-sony-newsos*)	# Sony NEWS 3600 or risc/news.
		tm_file="mips/news4.h ${tm_file}"
		if [[ x$stabs = xyes ]]; then
			tm_file="${tm_file} dbx.h"
		fi
		if [[ x$gas = xyes ]]
		then
			tmake_file=mips/t-mips-gas
		else
			extra_passes="mips-tfile mips-tdump"
		fi
		if [[ x$gnu_ld != xyes ]]
		then
			use_collect2=yes
		fi
		xmake_file=mips/x-sony
		;;
	mips-sony-sysv*)		# Sony NEWS 3800 with NEWSOS5.0.
					# That is based on svr4.
		# t-svr4 is not right because this system doesn't use ELF.
		tm_file="mips/news5.h ${tm_file}"
		if [[ x$stabs = xyes ]]; then
			tm_file="${tm_file} dbx.h"
		fi
		xm_file="xm-siglist.h ${xm_file}"
		xm_defines=USG
		if [[ x$gas = xyes ]]
		then
			tmake_file=mips/t-mips-gas
		else
			extra_passes="mips-tfile mips-tdump"
		fi
		if [[ x$gnu_ld != xyes ]]
		then
			use_collect2=yes
		fi
		;;
	mips-tandem-sysv4*)		# Tandem S2 running NonStop UX
		tm_file="mips/svr4-5.h mips/svr4-t.h"
		if [[ x$stabs = xyes ]]; then
			tm_file="${tm_file} dbx.h"
		fi
		xm_file="xm-siglist.h ${xm_file}"
		xm_defines=USG
		xmake_file=mips/x-sysv
		if [[ x$gas = xyes ]]
		then
			tmake_file=mips/t-mips-gas
			extra_parts="crtbegin.o crtend.o"
		else
			tmake_file=mips/t-mips
			extra_passes="mips-tfile mips-tdump"
		fi
		if [[ x$gnu_ld != xyes ]]
		then
			use_collect2=yes
		fi
		;;
	mips-*-ultrix* | mips-dec-mach3)	# Decstation.
		tm_file="mips/ultrix.h ${tm_file}"
		if [[ x$stabs = xyes ]]; then
			tm_file="${tm_file} dbx.h"
		fi
		xmake_file=mips/x-ultrix
		if [[ x$gas = xyes ]]
		then
			tmake_file=mips/t-mips-gas
		else
			tmake_file=mips/t-ultrix
			extra_passes="mips-tfile mips-tdump"
		fi
		if [[ x$gnu_ld != xyes ]]
		then
			use_collect2=yes
		fi
	        ;;
	mips-*-riscos[[56789]]bsd*)
		tm_file=mips/bsd-5.h	# MIPS BSD 4.3, RISC-OS 5.0
		if [[ x$stabs = xyes ]]; then
			tm_file="${tm_file} dbx.h"
		fi
		if [[ x$gas = xyes ]]
		then
			tmake_file=mips/t-bsd-gas
		else
			tmake_file=mips/t-bsd
			extra_passes="mips-tfile mips-tdump"
		fi
		if [[ x$gnu_ld != xyes ]]
		then
			use_collect2=yes
		fi
	        ;;
	mips-*-bsd* | mips-*-riscosbsd* | mips-*-riscos[[1234]]bsd*)
		tm_file="mips/bsd-4.h ${tm_file}" # MIPS BSD 4.3, RISC-OS 4.0
		if [[ x$stabs = xyes ]]; then
			tm_file="${tm_file} dbx.h"
		fi
		if [[ x$gas = xyes ]]
		then
			tmake_file=mips/t-bsd-gas
		else
			tmake_file=mips/t-bsd
			extra_passes="mips-tfile mips-tdump"
		fi
		if [[ x$gnu_ld != xyes ]]
		then
			use_collect2=yes
		fi
	        ;;
	mips-*-riscos[[56789]]sysv4*)
		tm_file=mips/svr4-5.h	# MIPS System V.4., RISC-OS 5.0
		if [[ x$stabs = xyes ]]; then
			tm_file="${tm_file} dbx.h"
		fi
		xm_file="xm-siglist.h ${xm_file}"
		xmake_file=mips/x-sysv
		if [[ x$gas = xyes ]]
		then
			tmake_file=mips/t-svr4-gas
		else
			tmake_file=mips/t-svr4
			extra_passes="mips-tfile mips-tdump"
		fi
		if [[ x$gnu_ld != xyes ]]
		then
			use_collect2=yes
		fi
		;;
	mips-*-sysv4* | mips-*-riscos[[1234]]sysv4* | mips-*-riscossysv4*)
		tm_file="mips/svr4-4.h ${tm_file}"
		if [[ x$stabs = xyes ]]; then
			tm_file="${tm_file} dbx.h"
		fi
		xm_defines=USG
		xmake_file=mips/x-sysv
		if [[ x$gas = xyes ]]
		then
			tmake_file=mips/t-svr4-gas
		else
			tmake_file=mips/t-svr4
			extra_passes="mips-tfile mips-tdump"
		fi
		if [[ x$gnu_ld != xyes ]]
		then
			use_collect2=yes
		fi
		;;
	mips-*-riscos[[56789]]sysv*)
		tm_file=mips/svr3-5.h	# MIPS System V.3, RISC-OS 5.0
		if [[ x$stabs = xyes ]]; then
			tm_file="${tm_file} dbx.h"
		fi
		xm_defines=USG
		xmake_file=mips/x-sysv
		if [[ x$gas = xyes ]]
		then
			tmake_file=mips/t-svr3-gas
		else
			tmake_file=mips/t-svr3
			extra_passes="mips-tfile mips-tdump"
		fi
		if [[ x$gnu_ld != xyes ]]
		then
			use_collect2=yes
		fi
		;;
	mips-*-sysv* | mips-*-riscos*sysv*)
		tm_file="mips/svr3-4.h ${tm_file}"
		if [[ x$stabs = xyes ]]; then
			tm_file="${tm_file} dbx.h"
		fi
		xm_defines=USG
		xmake_file=mips/x-sysv
		if [[ x$gas = xyes ]]
		then
			tmake_file=mips/t-svr3-gas
		else
			tmake_file=mips/t-svr3
			extra_passes="mips-tfile mips-tdump"
		fi
		if [[ x$gnu_ld != xyes ]]
		then
			use_collect2=yes
		fi
		;;
	mips-*-riscos[[56789]]*)		# Default MIPS RISC-OS 5.0.
		tm_file=mips/mips-5.h
		if [[ x$stabs = xyes ]]; then
			tm_file="${tm_file} dbx.h"
		fi
		if [[ x$gas = xyes ]]
		then
			tmake_file=mips/t-mips-gas
		else
			extra_passes="mips-tfile mips-tdump"
		fi
		if [[ x$gnu_ld != xyes ]]
		then
			use_collect2=yes
		fi
		;;
	mips-*-gnu*)
		;;
	mipsel-*-ecoff*)
		tm_file=mips/ecoffl.h
		if [[ x$stabs = xyes ]]; then
			tm_file="${tm_file} dbx.h"
		fi
		tmake_file=mips/t-ecoff
		;;
	mips-*-ecoff*)
		tm_file="gofast.h mips/ecoff.h"
		if [[ x$stabs = xyes ]]; then
			tm_file="${tm_file} dbx.h"
		fi
		tmake_file=mips/t-ecoff
		;;
	mipsel-*-elf*)
		tm_file="mips/elfl.h libgloss.h"
		tmake_file=mips/t-ecoff
		;;
	mips-*-elf*)
		tm_file="mips/elf.h libgloss.h"
		tmake_file=mips/t-ecoff
		;;
	mips64el-*-elf*)
		tm_file="mips/elfl64.h libgloss.h"
		tmake_file=mips/t-ecoff
		;;
	mips64orionel-*-elf*)
		tm_file="mips/elforion.h mips/elfl64.h libgloss.h"
		tmake_file=mips/t-ecoff
		;;
	mips64-*-elf*)
		tm_file="mips/elf64.h libgloss.h"
		tmake_file=mips/t-ecoff
		;;
	mips64orion-*-elf*)
		tm_file="mips/elforion.h mips/elf64.h libgloss.h"
		tmake_file=mips/t-ecoff
		;;
	mips64orion-*-rtems*)
		tm_file="mips/elforion.h mips/elf64.h mips/rtems64.h"
		tmake_file="mips/t-ecoff t-rtems"
		;;
	mipstx39el-*-elf*)
		tm_file="mips/r3900.h mips/elfl.h mips/abi64.h libgloss.h"
		tmake_file=mips/t-r3900
		;;
	mipstx39-*-elf*)
		tm_file="mips/r3900.h mips/elf.h mips/abi64.h libgloss.h"
		tmake_file=mips/t-r3900
		;;
	mips-*-*)				# Default MIPS RISC-OS 4.0.
		if [[ x$stabs = xyes ]]; then
			tm_file="${tm_file} dbx.h"
		fi
		if [[ x$gas = xyes ]]
		then
			tmake_file=mips/t-mips-gas
		else
			extra_passes="mips-tfile mips-tdump"
		fi
		if [[ x$gnu_ld != xyes ]]
		then
			use_collect2=yes
		fi
		;;
	mn10200-*-*)
		cpu_type=mn10200
		tm_file="mn10200/mn10200.h"
		if [[ x$stabs = xyes ]]
		then
			tm_file="${tm_file} dbx.h"
		fi
		use_collect2=no
		;;
	mn10300-*-*)
		cpu_type=mn10300
		tm_file="mn10300/mn10300.h"
		if [[ x$stabs = xyes ]]
		then
			tm_file="${tm_file} dbx.h"
		fi
		use_collect2=no
		;;
	ns32k-encore-bsd*)
		tm_file=ns32k/encore.h
		use_collect2=yes
		;;
	ns32k-sequent-bsd*)
		tm_file=ns32k/sequent.h
		use_collect2=yes
		;;
	ns32k-tek6100-bsd*)
		tm_file=ns32k/tek6100.h
		use_collect2=yes
		;;
	ns32k-tek6200-bsd*)
		tm_file=ns32k/tek6200.h
		use_collect2=yes
		;;
# This has not been updated to GCC 2.
#	ns32k-ns-genix*)
#		xm_defines=USG
#		xmake_file=ns32k/x-genix
#		tm_file=ns32k/genix.h
#		use_collect2=yes
#		;;
	ns32k-merlin-*)
		tm_file=ns32k/merlin.h
		use_collect2=yes
		;;
	ns32k-pc532-mach*)
		tm_file=ns32k/pc532-mach.h
		use_collect2=yes
		;;
	ns32k-pc532-minix*)
		tm_file=ns32k/pc532-min.h
		xm_file="ns32k/xm-pc532-min.h ${xm-file}"
		xm_defines=USG
		use_collect2=yes
		;;
	ns32k-*-netbsd*)
		tm_file=ns32k/netbsd.h
		xm_file="xm-netbsd.h ${xm_file}"
		# On NetBSD, the headers are already okay, except for math.h.
		fixincludes=fixinc.wrap
		tmake_file=t-netbsd
		;;
        pdp11-*-bsd)
		tm_file="${tm_file} pdp11/2bsd.h"
                ;;
        pdp11-*-*)
		;;
	pyramid-*-*)
		cpu_type=pyr
		xmake_file=pyr/x-pyr
		use_collect2=yes
		;;
	romp-*-aos*)
		use_collect2=yes
		;;
	romp-*-mach*)
		xmake_file=romp/x-mach
		use_collect2=yes
		;;
	powerpc-*-beos*)
		cpu_type=rs6000
		tm_file=rs6000/beos.h
		xm_file=rs6000/xm-beos.h
		tmake_file=rs6000/t-beos
		xmake_file=rs6000/x-beos
		;;
	powerpc-*-sysv* | powerpc-*-elf*)
		tm_file=rs6000/sysv4.h
		xm_file="xm-siglist.h rs6000/xm-sysv4.h"
		xm_defines="USG POSIX"
		extra_headers=ppc-asm.h
		if [[ x$gas = xyes ]]
		then
			tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
		else
			tmake_file="rs6000/t-ppc rs6000/t-ppccomm"
		fi
		xmake_file=rs6000/x-sysv4
		;;
	powerpc-*-eabiaix*)
		tm_file=rs6000/eabiaix.h
		tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
		fixincludes=Makefile.in
		extra_headers=ppc-asm.h
		;;
	powerpc-*-eabisim*)
		tm_file=rs6000/eabisim.h
		tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
		fixincludes=Makefile.in
		extra_headers=ppc-asm.h
		;;
	powerpc-*-eabi*)
		tm_file=rs6000/eabi.h
		if [[ x$gas = xyes ]]
		then
			tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
		else
			tmake_file="rs6000/t-ppc rs6000/t-ppccomm"
		fi
		fixincludes=Makefile.in
		extra_headers=ppc-asm.h
		;;
	powerpc-*-rtems*)
		tm_file=rs6000/rtems.h
		if [[ x$gas = xyes ]]
		then
		     tmake_file="rs6000/t-ppcgas t-rtems rs6000/t-ppccomm"
		else
		     tmake_file="rs6000/t-ppc t-rtems rs6000/t-ppccomm"
		fi
		fixincludes=Makefile.in
		extra_headers=ppc-asm.h
		;;
	powerpc-*-linux-gnulibc1)
		tm_file=rs6000/linux.h
		xm_file=rs6000/xm-sysv4.h
		out_file=rs6000/rs6000.c
		if [[ x$gas = xyes ]]
		then
			tmake_file="rs6000/t-ppcos t-linux t-linux-gnulibc1 rs6000/t-ppccomm"
		else
			tmake_file="rs6000/t-ppc t-linux t-linux-gnulibc1 rs6000/t-ppccomm"
		fi
		xmake_file=x-linux
		fixincludes=Makefile.in
		extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
		extra_headers=ppc-asm.h
		if [[ x$enable_threads = xyes ]]; then
			thread_file='posix'
		fi
		;;
	powerpc-*-linux-gnu*)
		tm_file=rs6000/linux.h
		xm_file="xm-siglist.h rs6000/xm-sysv4.h"
		xm_defines="USG ${xm_defines}"
		out_file=rs6000/rs6000.c
		if [[ x$gas = xyes ]]
		then
			tmake_file="rs6000/t-ppcos t-linux rs6000/t-ppccomm"
		else
			tmake_file="rs6000/t-ppc t-linux rs6000/t-ppccomm"
		fi
		xmake_file=x-linux
		fixincludes=Makefile.in
		extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
		extra_headers=ppc-asm.h
		if [[ x$enable_threads = xyes ]]; then
			thread_file='posix'
		fi
		;;
        powerpc-wrs-vxworks*)
                cpu_type=rs6000
		xm_file="xm-siglist.h rs6000/xm-sysv4.h"
		xm_defines="USG POSIX"
                tm_file=rs6000/vxppc.h
                tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
		extra_headers=ppc-asm.h
		thread_file='vxworks'
                ;;
	powerpcle-*-sysv* | powerpcle-*-elf*)
		tm_file=rs6000/sysv4le.h
		xm_file="xm-siglist.h rs6000/xm-sysv4.h"
		xm_defines="USG POSIX"
		if [[ x$gas = xyes ]]
		then
			tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
		else
			tmake_file="rs6000/t-ppc rs6000/t-ppccomm"
		fi
		xmake_file=rs6000/x-sysv4
		extra_headers=ppc-asm.h
		;;
	powerpcle-*-eabisim*)
		tm_file=rs6000/eabilesim.h
		tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
		fixincludes=Makefile.in
		extra_headers=ppc-asm.h
		;;
	powerpcle-*-eabi*)
		tm_file=rs6000/eabile.h
		if [[ x$gas = xyes ]]
		then
			tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
		else
			tmake_file="rs6000/t-ppc rs6000/t-ppccomm"
		fi
		fixincludes=Makefile.in
		extra_headers=ppc-asm.h
		;;
        powerpcle-*-winnt* )
                tm_file=rs6000/win-nt.h
                tmake_file=rs6000/t-winnt
#               extra_objs=pe.o
		fixincludes=Makefile.in
 		if [[ x$enable_threads = xyes ]]; then
			thread_file='win32'
		fi
		extra_headers=ppc-asm.h
		;;
	powerpcle-*-pe | powerpcle-*-cygwin32)
		tm_file=rs6000/cygwin32.h
		xm_file="rs6000/xm-cygwin32.h ${xm_file}"
		tmake_file=rs6000/t-winnt
		xmake_file=rs6000/x-cygwin32
#		extra_objs=pe.o
		fixincludes=Makefile.in
 		if [[ x$enable_threads = xyes ]]; then
			thread_file='win32'
		fi
		exeext=.exe
		extra_headers=ppc-asm.h
		;;
	powerpcle-*-solaris2*)
		tm_file=rs6000/sol2.h
		xm_file="xm-siglist.h rs6000/xm-sysv4.h"
		xm_defines="USG POSIX"
		if [[ x$gas = xyes ]]
		then
			tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
		else
			tmake_file="rs6000/t-ppc rs6000/t-ppccomm"
		fi
		xmake_file=rs6000/x-sysv4
		case $machine in
		*-*-solaris2.[[0-4]])
			fixincludes=fixinc.svr4;;
		*)
			fixincludes=fixinc.wrap;;
		esac
		extra_headers=ppc-asm.h
		;;
	rs6000-ibm-aix3.[[01]]*)
		tm_file=rs6000/aix31.h
		xmake_file=rs6000/x-aix31
		use_collect2=yes
		;;
	rs6000-ibm-aix3.2.[[456789]]* | powerpc-ibm-aix3.2.[[456789]]*)
		tm_file=rs6000/aix3newas.h
		if [[ x$host != x$target ]]
		then
			tmake_file=rs6000/t-xnewas
		else
			tmake_file=rs6000/t-newas
		fi
		use_collect2=yes
		;;
	rs6000-ibm-aix4.[[12]]* | powerpc-ibm-aix4.[[12]]*)
		tm_file=rs6000/aix41.h
		if [[ x$host != x$target ]]
		then
			tmake_file=rs6000/t-xnewas
		else
			tmake_file=rs6000/t-newas
		fi
		xmake_file=rs6000/x-aix41
		use_collect2=yes
		;;
	rs6000-ibm-aix4.[[3456789]].* | powerpc-ibm-aix4.[[3456789]].*)
		tm_file=rs6000/aix43.h
		if [[ x$host != x$target ]]
		then
			tmake_file=rs6000/t-xaix43
		else
			tmake_file=rs6000/t-aix43
		fi
		xmake_file=rs6000/x-aix43
		use_collect2=yes
		;;
	rs6000-ibm-aix[[56789]].* | powerpc-ibm-aix[[56789]].*)
		tm_file=rs6000/aix43.h
		if [[ x$host != x$target ]]
		then
			tmake_file=rs6000/t-xaix43
		else
			tmake_file=rs6000/t-aix43
		fi
		xmake_file=rs6000/x-aix43
		use_collect2=yes
		;;
	rs6000-ibm-aix*)
		use_collect2=yes
		;;
	rs6000-bull-bosx)
		use_collect2=yes
		;;
	rs6000-*-mach*)
		tm_file=rs6000/mach.h
		xm_file="${xm_file} rs6000/xm-mach.h"
		xmake_file=rs6000/x-mach
		use_collect2=yes
		;;
	rs6000-*-lynxos*)
		tm_file=rs6000/lynx.h
		xm_file=rs6000/xm-lynx.h
		tmake_file=rs6000/t-rs6000
		xmake_file=rs6000/x-lynx
		use_collect2=yes
		;;
	sh-*-elf*)
		tm_file=sh/elf.h
		float_format=sh
		;;
	sh-*-rtemself*)
		tmake_file="sh/t-sh t-rtems"
		tm_file=sh/rtemself.h
		float_format=sh
		;;
	sh-*-rtems*)
		tmake_file="sh/t-sh t-rtems"
		tm_file=sh/rtems.h
		float_format=sh
		;;
	sh-*-*)
		float_format=sh
		;;
	sparc-tti-*)
		tm_file=sparc/pbd.h
		xm_file="xm-alloca.h ${xm_file}"
		xm_defines=USG
		;;
	sparc-wrs-vxworks* | sparclite-wrs-vxworks*)
		tm_file=sparc/vxsparc.h
		tmake_file=sparc/t-vxsparc
		use_collect2=yes
		thread_file='vxworks'
		;;
	sparc-*-aout*)
		tmake_file=sparc/t-sparcbare
		tm_file="sparc/aout.h libgloss.h"
		;;
	sparc-*-netbsd*)
		tm_file=sparc/netbsd.h
		xm_file="xm-netbsd.h ${xm_file}"
		# On NetBSD, the headers are already okay, except for math.h.
		fixincludes=fixinc.wrap
		tmake_file=t-netbsd
		;;
	sparc-*-bsd*)
		tm_file=sparc/bsd.h
		;;
	sparc-*-elf*)
		tm_file=sparc/elf.h
		tmake_file=sparc/t-elf
		extra_parts="crti.o crtn.o crtbegin.o crtend.o"
		#float_format=i128
		float_format=i64
		;;
	sparc-*-linux-gnuaout*)		# Sparc's running GNU/Linux, a.out
		xm_file="${xm_file} sparc/xm-linux.h"
		tm_file=sparc/linux-aout.h
		xmake_file=x-linux
		fixincludes=Makefile.in #On Linux, the headers are ok already.
		gnu_ld=yes
		;;
	sparc-*-linux-gnulibc1*)	# Sparc's running GNU/Linux, libc5
		xm_file="${xm_file} sparc/xm-linux.h"
		xmake_file=x-linux
		tm_file=sparc/linux.h
		tmake_file="t-linux t-linux-gnulibc1"
		extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
		fixincludes=Makefile.in #On Linux, the headers are ok already.
		gnu_ld=yes
		;;
	sparc-*-linux-gnu*)		# Sparc's running GNU/Linux, libc6
		xm_file="${xm_file} sparc/xm-linux.h"
		xmake_file=x-linux
		tm_file=sparc/linux.h
		tmake_file="t-linux"
		extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
		fixincludes=Makefile.in #On Linux, the headers are ok already.
		gnu_ld=yes
 		if [[ x$enable_threads = xyes ]]; then
 			thread_file='posix'
 		fi
		;;
	sparc-*-lynxos*)
		if [[ x$gas = xyes ]]
		then
			tm_file=sparc/lynx.h
		else
			tm_file=sparc/lynx-ng.h
		fi
		xm_file=sparc/xm-lynx.h
		tmake_file=sparc/t-sunos41
		xmake_file=x-lynx
		;;
	sparc-*-rtems*)
		tmake_file="sparc/t-sparcbare t-rtems"
		tm_file=sparc/rtems.h
		;;
	sparc-*-solaris2*)
		if [[ x$gnu_ld = xyes ]]
		then
			tm_file=sparc/sol2.h
		else
			tm_file=sparc/sol2-sld.h
		fi
		xm_file="xm-siglist.h sparc/xm-sysv4.h sparc/xm-sol2.h"
		xm_defines="USG POSIX"
		tmake_file=sparc/t-sol2
		xmake_file=sparc/x-sysv4
		extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
		case $machine in
		*-*-solaris2.[[0-4]])
			fixincludes=fixinc.svr4;;
		*)
			fixincludes=fixinc.wrap;;
		esac
		float_format=i128
		if [[ x${enable_threads} = x ]]; then
		    enable_threads=$have_pthread_h
		    if [[ x${enable_threads} = x ]]; then
			enable_threads=$have_thread_h
		    fi
		fi
		if [[ x${enable_threads} = xyes ]]; then
		    if [[ x${have_pthread_h} = xyes ]]; then
			thread_file='posix'
		    else
			thread_file='solaris'
		    fi
		fi
		;;
	sparc-*-sunos4.0*)
		tm_file=sparc/sunos4.h
		tmake_file=sparc/t-sunos40
		use_collect2=yes
		;;
	sparc-*-sunos4*)
		tm_file=sparc/sunos4.h
		tmake_file=sparc/t-sunos41
		use_collect2=yes
		if [[ x$gas = xyes ]]; then
			tm_file="${tm_file} sparc/sun4gas.h"
		fi
		;;
	sparc-*-sunos3*)
		tm_file=sparc/sun4o3.h
		use_collect2=yes
		;;
	sparc-*-sysv4*)
		tm_file=sparc/sysv4.h
		xm_file="xm-siglist.h sparc/xm-sysv4.h"
		xm_defines="USG POSIX"
		tmake_file=t-svr4
		xmake_file=sparc/x-sysv4
		extra_parts="crtbegin.o crtend.o"
		;;
	sparc-*-vxsim*)
		xm_file="xm-siglist.h sparc/xm-sysv4.h sparc/xm-sol2.h"
		xm_defines="USG POSIX"
		tm_file=sparc/vxsim.h
		tmake_file=sparc/t-vxsparc
		xmake_file=sparc/x-sysv4
		;;
	sparclet-*-aout*)
		tm_file="sparc/splet.h libgloss.h"
		tmake_file=sparc/t-splet
		;;
	sparclite-*-coff*)
		tm_file="sparc/litecoff.h libgloss.h"
		tmake_file=sparc/t-sparclite
		;;
	sparclite-*-aout*)
		tm_file="sparc/lite.h aoutos.h libgloss.h"
		tmake_file=sparc/t-sparclite
		;;
	sparc64-*-aout*)
		tmake_file=sparc/t-sp64
		tm_file=sparc/sp64-aout.h
		;;
	sparc64-*-elf*)
		tmake_file=sparc/t-sp64
		tm_file=sparc/sp64-elf.h
		extra_parts="crtbegin.o crtend.o"
		;;
	sparc64-*-linux*)		# 64-bit Sparc's running GNU/Linux
		tmake_file=sparc/t-sp64
		xm_file="sparc/xm-sp64.h sparc/xm-linux.h"
		tm_file=sparc/linux64.h
		xmake_file=x-linux
		fixincludes=Makefile.in	# The headers are ok already.
		gnu_ld=yes
		;;
# This hasn't been upgraded to GCC 2.
#	tahoe-harris-*)			# Harris tahoe, using COFF.
#		tm_file=tahoe/harris.h
#		;;
#	tahoe-*-bsd*)			# tahoe running BSD
#		;;
	thumb-*-coff* | thumbel-*-coff*)
		tm_file=arm/tcoff.h
		out_file=arm/thumb.c
		xm_file=arm/xm-thumb.h
		md_file=arm/thumb.md
		tmake_file=arm/t-thumb
		fixincludes=Makefile.in # There is nothing to fix
		;;
# This hasn't been upgraded to GCC 2.
#	tron-*-*)
#		cpu_type=gmicro
#		use_collect2=yes
#		;;
	v850-*-*)
		cpu_type=v850
		tm_file="v850/v850.h"
		xm_file="v850/xm-v850.h"
		tmake_file=v850/t-v850
		if [[ x$stabs = xyes ]]
		then
			tm_file="${tm_file} dbx.h"
		fi
		use_collect2=no
		;;
	vax-*-bsd*)			# vaxen running BSD
		use_collect2=yes
		float_format=vax
		;;
	vax-*-sysv*)			# vaxen running system V
		tm_file="${tm_file} vax/vaxv.h"
		xm_defines=USG
		float_format=vax
		;;
	vax-*-netbsd*)
		tm_file="${tm_file} netbsd.h vax/netbsd.h"
		xm_file="xm-netbsd.h ${xm_file}"
		# On NetBSD, the headers are already okay, except for math.h.
		fixincludes=fixinc.wrap
		tmake_file=t-netbsd
		float_format=vax
		;;
	vax-*-ultrix*)			# vaxen running ultrix
		tm_file="${tm_file} vax/ultrix.h"
		use_collect2=yes
		float_format=vax
		;;
	vax-*-vms*)			# vaxen running VMS
		xm_file=vax/xm-vms.h
		tm_file=vax/vms.h
		float_format=vax
		;;
	vax-*-*)			# vax default entry
		float_format=vax
		;;
	we32k-att-sysv*)
		xm_file="${xm_file} xm-svr3"
		use_collect2=yes
		;;
	*)
		echo "Configuration $machine not supported" 1>&2
		exit 1
		;;
	esac

	case $machine in
	*-*-linux-gnu*)
	        ;; # Existing GNU/Linux systems do not use the GNU setup.
	*-*-gnu*)
		# On the GNU system, the setup is just about the same on
		# each different CPU.  The specific machines that GNU
		# supports are matched above and just set $cpu_type.
		xm_file="xm-gnu.h ${xm_file}"
		tm_file=${cpu_type}/gnu.h
		extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
		# GNU always uses ELF.
		elf=yes
		# GNU tools are the only tools.
		gnu_ld=yes
		gas=yes
		# On GNU, the headers are already okay.
		fixincludes=Makefile.in
		xmake_file=x-linux	# These details are the same as Linux.
		tmake_file=t-gnu	# These are not.
		;;
	*-*-sysv4*)
		fixincludes=fixinc.svr4
		xmake_try_sysv=x-sysv
		install_headers_dir=install-headers-cpio
		;;
	*-*-sysv*)
		install_headers_dir=install-headers-cpio
		;;
	esac

	# Distinguish i[34567]86
	# Also, do not run mips-tfile on MIPS if using gas.
	# Process --with-cpu= for PowerPC/rs6000
	target_cpu_default2=
	case $machine in
	i486-*-*)
		target_cpu_default2=1
		;;
	i586-*-*)
		target_cpu_default2=2
		;;
	i686-*-* | i786-*-*)
		target_cpu_default2=3
		;;
	alpha*-*-*)
		case $machine in
			alphaev6*)
				target_cpu_default2="MASK_CPU_EV6|MASK_BXW|MASK_CIX|MASK_MAX"
				;;
			alphapca56*)
				target_cpu_default2="MASK_CPU_EV5|MASK_BWX|MASK_MAX"
				;;
			alphaev56*)
				target_cpu_default2="MASK_CPU_EV5|MASK_BWX"
				;;
			alphaev5*)
				target_cpu_default2="MASK_CPU_EV5"
				;;
		esac
				
		if [[ x$gas = xyes ]]
		then
			if [[ "$target_cpu_default2" = "" ]]
			then
				target_cpu_default2="MASK_GAS"
			else
				target_cpu_default2="${target_cpu_default2}|MASK_GAS"
			fi
		fi
		;;
	arm*-*-*)
		case "x$with_cpu" in
			x)
				# The most generic
				target_cpu_default2="TARGET_CPU_generic"
				;;

			# Distinguish cores, and major variants
			# arm7m doesn't exist, but D & I don't affect code
			xarm[23678] | xarm250 | xarm[67][01]0 \
			| xarm7m | xarm7dm | xarm7dmi | xarm7tdmi \
			| xarm7100 | xarm7500 | xarm7500fe | xarm810 \
			| xstrongarm | xstrongarm110)
				target_cpu_default2="TARGET_CPU_$with_cpu"
				;;

			xyes | xno)
				echo "--with-cpu must be passed a value" 1>&2
				exit 1
				;;

			*)
				if [[ x$pass2done = xyes ]]
				then
					echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
					exit 1
				fi
				;;
		esac
		;;

	mips*-*-ecoff* | mips*-*-elf*)
		if [[ x$gas = xyes ]]
		then
			if [[ x$gnu_ld = xyes ]]
			then
				target_cpu_default2=20
			else
				target_cpu_default2=16
			fi
		fi
		;;
	mips*-*-*)
		if [[ x$gas = xyes ]]
		then
			target_cpu_default2=16
		fi
		;;
	powerpc*-*-* | rs6000-*-*)
		case "x$with_cpu" in
			x)
				;;

			xcommon | xpower | xpower2 | xpowerpc | xrios \
			  | xrios1 | xrios2 | xrsc | xrsc1 \
			  | x601 | x602 | x603 | x603e | x604 | x604e | x620 \
			  | x403 | x505 | x801 | x821 | x823 | x860)
				target_cpu_default2="\"$with_cpu\""
				;;

			xyes | xno)
				echo "--with-cpu must be passed a value" 1>&2
				exit 1
				;;

			*)
				if [[ x$pass2done = xyes ]]
				then
					echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
					exit 1
				fi
				;;
		esac
		;;
	sparc*-*-*)
		case ".$with_cpu" in
			.)
				target_cpu_default2=TARGET_CPU_"`echo $machine | sed 's/-.*$//'`"
				;;
			.supersparc | .ultrasparc | .v7 | .v8 | .v9)
				target_cpu_default2="TARGET_CPU_$with_cpu"
				;;
			*)
				if [[ x$pass2done = xyes ]]
				then
					echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
					exit 1
				fi
				;;
		esac
		;;
	esac

	if [[ "$target_cpu_default2" != "" ]]
	then
		if [[ "$target_cpu_default" != "" ]]
		then
			target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
		else
			target_cpu_default=$target_cpu_default2
		fi
	fi

	# No need for collect2 if we have the GNU linker.
	# Actually, there is now; GNU ld doesn't handle the EH info or
	# collecting for shared libraries.
	#case x$gnu_ld in
	#xyes)
	#	use_collect2=
	#	;;
	#esac

# Save data on machine being used to compile GCC in build_xm_file.
# Save data on host machine in vars host_xm_file and host_xmake_file.
	if [[ x$pass1done = x ]]
	then
		if [[ x"$xm_file" = x ]]
		then build_xm_file=$cpu_type/xm-$cpu_type.h
		else build_xm_file=$xm_file
		fi
		build_xm_defines=$xm_defines
		build_install_headers_dir=$install_headers_dir
		build_exeext=$exeext
		pass1done=yes
	else
		if [[ x$pass2done = x ]]
		then
			if [[ x"$xm_file" = x ]]
			then host_xm_file=$cpu_type/xm-$cpu_type.h
			else host_xm_file=$xm_file
			fi
			host_xm_defines=$xm_defines
			if [[ x"$xmake_file" = x ]]
			then xmake_file=$cpu_type/x-$cpu_type
			fi
			host_xmake_file="$xmake_file"
			host_truncate_target=$truncate_target
			host_extra_gcc_objs=$extra_gcc_objs
			host_extra_objs=$extra_host_objs
			host_exeext=$exeext
			pass2done=yes
		fi
	fi
done

extra_objs="${host_extra_objs} ${extra_objs}"

# Default the target-machine variables that were not explicitly set.
if [[ x"$tm_file" = x ]]
then tm_file=$cpu_type/$cpu_type.h; fi

if [[ x$extra_headers = x ]]
then extra_headers=; fi

if [[ x"$xm_file" = x ]]
then xm_file=$cpu_type/xm-$cpu_type.h; fi

if [[ x$md_file = x ]]
then md_file=$cpu_type/$cpu_type.md; fi

if [[ x$out_file = x ]]
then out_file=$cpu_type/$cpu_type.c; fi

if [[ x"$tmake_file" = x ]]
then tmake_file=$cpu_type/t-$cpu_type
fi

if [[ x$float_format = x ]]
then float_format=i64
fi

if [[ x$enable_haifa = x ]]
then
  case $target in
    alpha*-* | hppa1.?-* | powerpc*-* | rs6000-* | *sparc*-* | m32r*-*)
      enable_haifa=yes;;
  esac
fi

# Say what files are being used for the output code and MD file.
echo "Using \`$srcdir/config/$out_file' to output insns."
echo "Using \`$srcdir/config/$md_file' as machine description file."

count=a
for f in $tm_file; do
	count=${count}x
done
if [[ $count = ax ]]; then
	echo "Using \`$srcdir/config/$tm_file' as target machine macro file."
else
	echo "Using the following target machine macro files:"
	for f in $tm_file; do
		echo "	$srcdir/config/$f"
	done
fi

count=a
for f in $host_xm_file; do
	count=${count}x
done
if [[ $count = ax ]]; then
	echo "Using \`$srcdir/config/$host_xm_file' as host machine macro file."
else
	echo "Using the following host machine macro files:"
	for f in $host_xm_file; do
		echo "	$srcdir/config/$f"
	done
fi

if [[ "$host_xm_file" != "$build_xm_file" ]]; then
	count=a
	for f in $build_xm_file; do
		count=${count}x
	done
	if [[ $count = ax ]]; then
		echo "Using \`$srcdir/config/$build_xm_file' as build machine macro file."
	else
		echo "Using the following build machine macro files:"
		for f in $build_xm_file; do
			echo "	$srcdir/config/$f"
		done
	fi
fi

if [[ x$thread_file = x ]]; then
	if [[ x$target_thread_file != x ]]; then
		thread_file=$target_thread_file
	else
		thread_file='single'
	fi
fi

# Set up the header files.
# $links is the list of header files to create.
# $vars is the list of shell variables with file names to include.
# auto-host.h is the file containing items generated by autoconf and is
# the first file included by config.h.
null_defines=
host_xm_file="auto-host.h ${host_xm_file}"

# If host=build, it is correct to have hconfig include auto-host.h
# as well.  If host!=build, we are in error and need to do more 
# work to find out the build config parameters.
if [[ x$host = x$build ]]
then
	build_xm_file="auto-host.h ${build_xm_file}"
else
	# We create a subdir, then run autoconf in the subdir.
	# To prevent recursion we set host and build for the new
	# invocation of configure to the build for this invocation
	# of configure. 
	tempdir=build.$$
	rm -rf $tempdir
	mkdir $tempdir
	cd $tempdir
	case ${srcdir} in
	/*) realsrcdir=${srcdir};;
	*) realsrcdir=../${srcdir};;
	esac
	CC=${CC_FOR_BUILD} ${realsrcdir}/configure \
		--target=$target --host=$build --build=$build

	# We just finished tests for the build machine, so rename
	# the file auto-build.h in the gcc directory.
	mv auto-host.h ../auto-build.h
	cd ..
	rm -rf $tempdir
	build_xm_file="auto-build.h ${build_xm_file}"
fi

vars="host_xm_file tm_file xm_file build_xm_file"
links="config.h tm.h tconfig.h hconfig.h"
defines="host_xm_defines null_defines xm_defines build_xm_defines"

rm -f config.bak
if [[ -f config.status ]]; then mv -f config.status config.bak; fi

# Make the links.
while [[ -n "$vars" ]]
do
	set $vars; var=$1; shift; vars=$*
	set $links; link=$1; shift; links=$*
	set $defines; define=$1; shift; defines=$*

	rm -f $link

	# Define TARGET_CPU_DEFAULT if the system wants one.
	# This substitutes for lots of *.h files.
	if [[ "$target_cpu_default" != "" -a $link = tm.h ]]
	then
		echo "#define TARGET_CPU_DEFAULT ($target_cpu_default)" >>$link
	fi

	for file in `eval echo '$'$var`; do
		echo "#include \"$file\"" >>$link
	done

	for def in `eval echo '$'$define`; do
		echo "#ifndef $def" >>$link
		echo "#define $def" >>$link
		echo "#endif" >>$link
	done
done

# Truncate the target if necessary
if [[ x$host_truncate_target != x ]]; then
	target=`echo $target | sed -e 's/\(..............\).*/\1/'`
fi

# Get the version trigger filename from the toplevel
if [[ "${with_gcc_version_trigger+set}" = set ]]; then
	gcc_version_trigger=$with_gcc_version_trigger
else
	gcc_version_trigger=${srcdir}/version.c
fi
gcc_version=`sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/' < ${gcc_version_trigger}`

# Get an absolute path to the GCC top-level source directory
holddir=`pwd`
cd $srcdir
topdir=`pwd`
cd $holddir

# Conditionalize the makefile for this host machine.
# Make-host contains the concatenation of all host makefile fragments
# [there can be more than one].  This file is built by configure.frag.
host_overrides=Make-host
dep_host_xmake_file=
for f in .. ${host_xmake_file}
do
	if [[ -f ${srcdir}/config/$f ]]
	then
		dep_host_xmake_file="${dep_host_xmake_file} ${srcdir}/config/$f"
	fi
done

# Conditionalize the makefile for this target machine.
# Make-target contains the concatenation of all host makefile fragments
# [there can be more than one].  This file is built by configure.frag.
target_overrides=Make-target
dep_tmake_file=
for f in .. ${tmake_file}
do
	if [[ -f ${srcdir}/config/$f ]]
	then
		dep_tmake_file="${dep_tmake_file} ${srcdir}/config/$f"
	fi
done

# If the host doesn't support symlinks, modify CC in
# FLAGS_TO_PASS so CC="stage1/xgcc -Bstage1/" works.
# Otherwise, we can use "CC=$(CC)".
rm -f symtest.tem
if $symbolic_link $srcdir/gcc.c symtest.tem 2>/dev/null
then
	cc_set_by_configure="\$(CC)"
	stage_prefix_set_by_configure="\$(STAGE_PREFIX)"
else
	rm -f symtest.tem
	if cp -p $srcdir/gcc.c symtest.tem 2>/dev/null
	then
		symbolic_link="cp -p"
	else
		symbolic_link="cp"
	fi
	cc_set_by_configure="\`case '\$(CC)' in stage*) echo '\$(CC)' | sed -e 's|stage|../stage|g';; *) echo '\$(CC)';; esac\`"
	stage_prefix_set_by_configure="\`case '\$(STAGE_PREFIX)' in stage*) echo '\$(STAGE_PREFIX)' | sed -e 's|stage|../stage|g';; *) echo '\$(STAGE_PREFIX)';; esac\`"
fi
rm -f symtest.tem

out_object_file=`basename $out_file .c`.o

tm_file_list=
for f in $tm_file; do
	tm_file_list="${tm_file_list} \$(srcdir)/config/$f"
done

host_xm_file_list=
for f in $host_xm_file; do
	if test $f != "auto-host.h"; then
		host_xm_file_list="${host_xm_file_list} \$(srcdir)/config/$f"
	else
		host_xm_file_list="${host_xm_file_list} auto-host.h"
	fi
done

build_xm_file_list=
for f in $build_xm_file; do
	if test $f != "auto-build.h"; then
		if test $f != "auto-host.h"; then
			build_xm_file_list="${build_xm_file_list} \$(srcdir)/config/$f"
		else
			build_xm_file_list="${build_xm_file_list} auto-host.h"
		fi
	else
		build_xm_file_list="${build_xm_file_list} auto-build.h"
	fi
done

# Define macro CROSS_COMPILE in compilation
# if this is a cross-compiler.
# Also use all.cross instead of all.internal
# and add cross-make to Makefile.
cross_overrides="/dev/null"
if [[ x$host != x$target ]]
then
	cross_defines="CROSS=-DCROSS_COMPILE"
	cross_overrides="${topdir}/cross-make"
fi

# When building gcc with a cross-compiler, we need to fix a few things.
# This must come after cross-make as we want all.build to override
# all.cross.
build_overrides="/dev/null"
if [[ x$build != x$host ]]
then
	build_overrides="${topdir}/build-make"
fi

# Expand extra_headers to include complete path.
# This substitutes for lots of t-* files.
extra_headers_list=
if [[ "x$extra_headers"