| # GCC build-, host- and target-specific configuration file. |
| # Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc. |
| |
| #This file is part of GCC. |
| |
| #GCC is free software; you can redistribute it and/or modify it under |
| #the terms of the GNU General Public License as published by the Free |
| #Software Foundation; either version 2, or (at your option) any later |
| #version. |
| |
| #GCC is distributed in the hope that it will be useful, but WITHOUT |
| #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| #for more details. |
| |
| #You should have received a copy of the GNU General Public License |
| #along with GCC; see the file COPYING. If not, write to the Free |
| #Software Foundation, 59 Temple Place - Suite 330, Boston, MA |
| #02111-1307, USA. |
| |
| # This is the GCC build-, host- and target-specific configuration file |
| # where a configuration type, as recognized and generated by config.bfd, |
| # is mapped to different system-specific definitions and files. This is |
| # invoked by the autoconf-generated configure script, called for build, |
| # host and target in that order, setting ${machine} to each. Putting it |
| # in a separate shell file lets us skip running autoconf when modifying |
| # build-, host- and target-specific information. |
| |
| # This file switches on the shell variable ${machine}, and also uses the |
| # following shell variables: |
| # |
| # with_* Various variables as set by configure. |
| # |
| # enable_threads_flag Either the name, yes or no depending on whether |
| # threads support was requested. |
| # |
| # gas_flag Either yes or no depending on whether GNU as was |
| # requested. |
| # |
| # gnu_ld_flag Either yes or no depending on whether GNU ld was |
| # requested. |
| |
| # This file sets the following shell variables for use by the |
| # autoconf-generated configure script: |
| # |
| # cpu_type The name of the cpu, if different from machine. |
| # |
| # tm_defines List of target macros to define for all compilations. |
| # |
| # tm_file A list of target macro files, if different from |
| # "$cpu_type/$cpu_type.h". Usually it's constructed |
| # per target in a way like this: |
| # tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h" |
| # Note that the preferred order is: |
| # - specific target header "${cpu_type}/${cpu_type.h}" |
| # - generic headers like dbxelf.h elfos.h, netware.h, etc. |
| # - specializing target headers like ${cpu_type.h}/elf.h |
| # This helps to keep OS specific stuff out of the CPU |
| # defining header ${cpu_type}/${cpu_type.h}. |
| # |
| # tm_p_file Location of file with declarations for functions |
| # in $out_file. |
| # |
| # out_file The name of the machine description C support |
| # file, if different from "$cpu_type/$cpu_type.c". |
| # |
| # md_file The name of the machine-description file, if |
| # different from "$cpu_type/$cpu_type.md". |
| # |
| # tmake_file A list of machine-description-specific |
| # makefile-fragments, if different from |
| # "$cpu_type/t-$cpu_type". |
| # |
| # extra_modes The name of the file containing a list of extra |
| # machine modes, if necessary and different from |
| # "$cpu_type/$cpu_type-modes.def". |
| # |
| # extra_objs List of extra objects that should be linked into |
| # the compiler proper (cc1, cc1obj, cc1plus) |
| # depending on target. |
| # |
| # extra_headers List of used header files from the directory |
| # config/${cpu_type}. |
| # |
| # host_xmake_file List of host-specific makefile-fragments. |
| # |
| # extra_passes List of extra executables compiled for this target |
| # machine, used for compiling from source to object. |
| # |
| # extra_parts List of extra object files that should be compiled |
| # for this target machine. |
| # |
| # extra_programs Like extra_passes, but these are used when linking. |
| # |
| # host_extra_objs List of extra host-dependent objects that should |
| # be linked into the compiler proper. |
| # |
| # host_extra_gcc_objs List of extra host-dependent objects that should |
| # be linked into the gcc driver. |
| # |
| # c_target_objs List of extra target-dependent objects that be |
| # linked into the C compiler only. |
| # |
| # cxx_target_objs List of extra target-dependent objects that be |
| # linked into the C++ compiler only. |
| # |
| # target_gtfiles List of extra source files with type information. |
| # |
| # build_xm_defines List of macros to define when compiling for the |
| # build machine. |
| # |
| # build_xm_file List of files to include when compiling for the |
| # build machine. |
| # |
| # host_xm_defines List of macros to define when compiling for the |
| # host machine. |
| # |
| # host_xm_file List of files to include when compiling for the |
| # host machine. |
| # |
| # xm_defines List of macros to define when compiling for the |
| # target machine. |
| # |
| # xm_file List of files to include when compiling for the |
| # target machine. |
| # |
| # use_collect2 Set to yes or no, depending on whether collect2 |
| # will be used. |
| # |
| # target_cpu_default Set to override the default target model. |
| # |
| # build_install_headers_dir |
| # Target to use when installing header files. |
| # |
| # host_truncate_target |
| # Non-empty if the target name should be truncated |
| # on this host, due to filename length issues. |
| # |
| # gdb_needs_out_file_path |
| # Set to yes if gdb needs a dir command with |
| # `dirname $out_file`. |
| # |
| # build_exeext Set to the suffix, if the build machine requires |
| # executables to have a file name suffix. |
| # |
| # host_exeext Set to the suffix, if the host machine requires |
| # executables to have a file name suffix. |
| # |
| # thread_file Set to control which thread package to use. |
| # |
| # gas Set to yes or no depending on whether the target |
| # system normally uses GNU as. |
| |
| # The following variables are used in each case-construct to build up the |
| # outgoing variables: |
| # |
| # xmake_file Makefile-fragment when this system is as a host, |
| # for host_xmake_file. |
| # |
| # extra_host_objs List of extra objects that should be linked into |
| # the compiler proper when this system is a host, |
| # for host_extra_objs. |
| # |
| # install_headers_dir Makefile-target for how the header file directory |
| # is installed, when this system is a build system, |
| # for build_install_headers_dir. |
| # |
| # truncate_target Non-empty if the target name should be truncated |
| # when this system is a host, due to filename length |
| # issues. For host_truncate_target. |
| # |
| # exeext The suffix for executables on this system. |
| # |
| # gnu_ld Set to yes or no depending on whether the target |
| # system normally uses GNU ld. |
| |
| out_file= |
| xmake_file= |
| tmake_file= |
| extra_headers= |
| extra_passes= |
| extra_parts= |
| extra_programs= |
| extra_objs= |
| extra_host_objs= |
| extra_gcc_objs= |
| c_target_objs= |
| cxx_target_objs= |
| tm_defines= |
| xm_defines= |
| # Set this to force installation and use of collect2. |
| use_collect2= |
| # Set this to override the default target model. |
| target_cpu_default= |
| # Set this to control how the header file directory is installed. |
| install_headers_dir=install-headers-tar |
| # Set this if directory names should be truncated to 14 characters. |
| truncate_target= |
| # Set this if gdb needs a dir command with `dirname $out_file` |
| gdb_needs_out_file_path= |
| # Set this if the build machine requires executables to have a |
| # file name suffix. |
| exeext= |
| # Set this to control which thread package will be used. |
| thread_file= |
| # Reinitialize these from the flag values every loop pass, since some |
| # configure entries modify them. |
| gas="$gas_flag" |
| gnu_ld="$gnu_ld_flag" |
| enable_threads=$enable_threads_flag |
| target_gtfiles= |
| |
| # Obsolete configurations. |
| case $machine in |
| m88k-*-* \ |
| | mn10200-*-* \ |
| | romp-*-* \ |
| | alpha*-*-interix* \ |
| | alpha*-*-linux*libc1* \ |
| | alpha*-*-linux*ecoff* \ |
| | arm*-*-aout* \ |
| | arm*-*-conix* \ |
| | arm*-*-oabi \ |
| | strongarm-*-coff* \ |
| | hppa1.0-*-osf* \ |
| | hppa1.0-*-bsd* \ |
| | hppa1.[01]-*-hpux[789]* \ |
| | hppa*-*-hiux* \ |
| | hppa*-*-lites* \ |
| | i?86-*-win32 \ |
| | m68000-hp-bsd* \ |
| | m68000-sun-sunos* \ |
| | m68000-att-sysv* \ |
| | m68k-atari-sysv* \ |
| | m68k-motorola-sysv* \ |
| | m68k-ncr-sysv* \ |
| | m68k-plexus-sysv* \ |
| | m68k-tti-* \ |
| | m68k-crds-unos* \ |
| | m68k-cbm-sysv* \ |
| | m68k-ccur-rtu* \ |
| | m68k-hp-bsd* \ |
| | m68k-sun-mach* \ |
| | m68k-sun-sunos* \ |
| | m68k-*-linux*aout* \ |
| | m68k-*-linux*libc1* \ |
| | m68k-*-psos* \ |
| | mips*-*-ecoff* \ |
| | mips-sni-sysv4 \ |
| | mips64orion-*-rtems* \ |
| | ns32k-*-openbsd* \ |
| | powerpc*-*-sysv* \ |
| | powerpc*-*-linux*libc1* \ |
| | rs6000-ibm-aix[123]* \ |
| | rs6000-bull-bosx \ |
| | rs6000-*-mach* \ |
| | sparc-*-aout* \ |
| | sparc-*-netbsd*aout* \ |
| | sparc-*-bsd* \ |
| | sparc-*-chorusos* \ |
| | sparc-*-linux*aout* \ |
| | sparc-*-linux*libc1* \ |
| | sparc-*-lynxos* \ |
| | sparc-hal-solaris2* \ |
| | sparc-*-sunos[34]* \ |
| | sparclet-*-aout* \ |
| | sparclite-*-aout* \ |
| | sparc86x-*-aout* \ |
| | v850-*-rtems* \ |
| | vax-*-vms* \ |
| ) |
| if test "x$enable_obsolete" != xyes; then |
| echo "*** Configuration $machine is obsolete." >&2 |
| echo "*** Specify --enable-obsolete to build it anyway." >&2 |
| echo "*** Support will be REMOVED in the next major release of GCC," >&2 |
| echo "*** unless a maintainer comes forward." >&2 |
| exit 1 |
| fi;; |
| esac |
| |
| # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be |
| # updated in each machine entry. Also set default extra_headers for some |
| # machines. |
| tm_p_file= |
| cpu_type=`echo $machine | sed 's/-.*$//'` |
| case $machine in |
| alpha*-*-*) |
| cpu_type=alpha |
| ;; |
| strongarm*-*-*) |
| cpu_type=arm |
| ;; |
| arm*-*-*) |
| cpu_type=arm |
| ;; |
| xscale-*-*) |
| cpu_type=arm |
| ;; |
| i[34567]86-*-*) |
| cpu_type=i386 |
| extra_headers="mmintrin.h xmmintrin.h emmintrin.h pmmintrin.h" |
| ;; |
| x86_64-*-*) |
| cpu_type=i386 |
| extra_headers="mmintrin.h xmmintrin.h emmintrin.h pmmintrin.h" |
| ;; |
| ia64-*-*) |
| extra_headers=ia64intrin.h |
| ;; |
| hppa*-*-* | parisc*-*-*) |
| cpu_type=pa |
| ;; |
| m680[012]0-*-*) |
| cpu_type=m68k |
| extra_headers=math-68881.h |
| ;; |
| m68k-*-*) |
| extra_headers=math-68881.h |
| ;; |
| mips*-*-*) |
| cpu_type=mips |
| ;; |
| powerpc*-*-*) |
| cpu_type=rs6000 |
| extra_headers="ppc-asm.h altivec.h spe.h" |
| ;; |
| sparc*-*-*) |
| cpu_type=sparc |
| ;; |
| # Note the 'l'; we need to be able to match e.g. "shle" or "shl". |
| sh[123456789l]*-*-*) |
| cpu_type=sh |
| ;; |
| tic4x-*-*) |
| cpu_type=c4x |
| ;; |
| esac |
| |
| tm_file=${cpu_type}/${cpu_type}.h |
| if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h |
| then |
| tm_p_file=${cpu_type}/${cpu_type}-protos.h |
| fi |
| extra_modes= |
| if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def |
| then |
| extra_modes=${cpu_type}/${cpu_type}-modes.def |
| fi |
| |
| case $machine in |
| x86_64-*-*) |
| tm_file="i386/biarch64.h ${tm_file}" |
| ;; |
| esac |
| |
| # On a.out targets, we need to use collect2. |
| case $machine in |
| *-*-*aout*) |
| use_collect2=yes |
| ;; |
| esac |
| |
| # Common parts for GNU/Linux, GNU/Hurd, OpenBSD, NetBSD, and FreeBSD systems. |
| case $machine in |
| *-*-linux*) |
| xm_defines=POSIX |
| case $machine in |
| *-*-linux*ecoff* | *-*-linux*libc1* | *-*-linux*oldld* | *-*-linux*aout*) |
| ;; |
| *) |
| extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o" |
| gas=yes gnu_ld=yes |
| case x${enable_threads} in |
| x | xyes | xposix) thread_file='posix' |
| ;; |
| esac |
| ;; |
| esac |
| ;; |
| *-*-gnu*) |
| # On the Hurd, the setup is just about the same on |
| # each different CPU. The specific machines that we |
| # support are matched above and just set $cpu_type. |
| xm_defines=POSIX |
| tm_file="${cpu_type}/gnu.h" |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o" |
| # GNU always uses ELF. |
| elf=yes |
| # GNU tools are the only tools. |
| gnu_ld=yes |
| gas=yes |
| # These details are the same as for Linux. |
| # But here we need a little extra magic. |
| tmake_file="t-slibgcc-elf-ver t-linux t-gnu" |
| case $machine in |
| alpha*) |
| tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}" |
| ;; |
| i[34567]86-*-*) |
| tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}" |
| ;; |
| esac |
| ;; |
| *-*-openbsd*) |
| tm_file=${cpu_type}/openbsd.h |
| tmake_file="t-libc-ok t-openbsd t-libgcc-pic" |
| xm_defines=POSIX |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| tmake_file="${tmake_file} t-openbsd-thread" |
| fi |
| ;; |
| *-*-netbsd*) |
| tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd" |
| xm_defines=POSIX |
| gas=yes |
| gnu_ld=yes |
| |
| # NetBSD 2.0 and later get POSIX threads enabled by default. |
| # Allow them to be explicitly enabled on any other version. |
| case x${enable_threads} in |
| x) |
| case $machine in |
| *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*) |
| thread_file='posix' |
| tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS" |
| ;; |
| esac |
| ;; |
| xyes | xposix) |
| thread_file='posix' |
| tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS" |
| ;; |
| esac |
| |
| # NetBSD 1.7 and later are set up to use GCC's crtstuff for |
| # ELF configurations. We will clear extra_parts in the |
| # a.out configurations. |
| case $machine in |
| *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*) |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o" |
| ;; |
| esac |
| ;; |
| *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*) |
| # This is the place-holder for the generic a.out configuration |
| # of FreeBSD. No actual configuration resides here since |
| # there was only ever a bare-bones ix86 configuration for |
| # a.out and it exists solely in the machine-specific section. |
| # This place-holder must exist to avoid dropping into |
| # the generic ELF configuration of FreeBSD (i.e. it must be |
| # ordered before that section). |
| ;; |
| *-*-freebsd*) |
| # This is the generic ELF configuration of FreeBSD. Later |
| # machine-specific sections may refine and add to this |
| # configuration. |
| # |
| # Due to tm_file entry ordering issues that vary between cpu |
| # architectures, we only define fbsd_tm_file to allow the |
| # machine-specific section to dictate the final order of all |
| # entries of tm_file with the minor exception that components |
| # of the tm_file set here will always be of the form: |
| # |
| # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h |
| # |
| # The machine-specific section should not tamper with this |
| # ordering but may order all other entries of tm_file as it |
| # pleases around the provided core setting. |
| gas=yes |
| gnu_ld=yes |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o" |
| case $machine in |
| *-*-freebsd3 | *-*-freebsd[3].*) fbsd_tm_file="freebsd3.h";; |
| *-*-freebsd4 | *-*-freebsd[4].*) fbsd_tm_file="freebsd4.h";; |
| *-*-freebsd5 | *-*-freebsd[5].*) fbsd_tm_file="freebsd5.h";; |
| *-*-freebsd6 | *-*-freebsd[6].*) fbsd_tm_file="freebsd6.h";; |
| *) echo 'Please update *-*-freebsd* in gcc/config.gcc'; exit 1;; |
| esac |
| tmake_file="t-slibgcc-elf-ver t-freebsd" |
| xmake_file=none |
| xm_defines=POSIX |
| case x${enable_threads} in |
| xno) fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h";; |
| x | xyes | xpthreads | xposix) |
| thread_file='posix' |
| tmake_file="${tmake_file} t-freebsd-thread" |
| # Before 5.0, FreeBSD can't bind shared libraries to -lc |
| # when "optionally" threaded via weak pthread_* checks. |
| case $machine in |
| *-*-freebsd[34] | *-*-freebsd[34].*) |
| tmake_file="${tmake_file} t-slibgcc-nolc-override";; |
| esac |
| ;; |
| *) echo 'Unknown thread configuration for FreeBSD'; exit 1;; |
| esac |
| fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h" |
| ;; |
| esac |
| |
| case $machine in |
| # Support site-specific machine types. |
| *local*) |
| rest=`echo $machine | sed -e "s/$cpu_type-//"` |
| tm_file=${cpu_type}/$rest.h |
| if test -f $srcdir/config/${cpu_type}/xm-$rest.h |
| then xm_file=${cpu_type}/xm-$rest.h |
| fi |
| if test -f $srcdir/config/${cpu_type}/x-$rest |
| then xmake_file=${cpu_type}/x-$rest |
| fi |
| if test -f $srcdir/config/${cpu_type}/t-$rest |
| then tmake_file=${cpu_type}/t-$rest |
| fi |
| ;; |
| alpha*-*-unicosmk*) |
| use_collect2=yes |
| tm_file="${tm_file} alpha/unicosmk.h" |
| |
| # Don't include t-ieee for now because we don't support that yet |
| # tmake_file="alpha/t-ieee" |
| tmake_file="alpha/t-unicosmk" |
| ;; |
| alpha-*-interix) |
| tm_file="${tm_file} alpha/alpha32.h interix.h alpha/alpha-interix.h" |
| |
| # GAS + IEEE_CONFORMANT+IEEE (no inexact); |
| #target_cpu_default="MASK_GAS|MASK_IEEE_CONFORMANT|MASK_IEEE" |
| |
| # GAS + IEEE_CONFORMANT |
| target_cpu_default="MASK_GAS|MASK_IEEE_CONFORMANT" |
| |
| xm_defines=POSIX |
| xm_file="alpha/xm-alpha-interix.h" |
| tmake_file="alpha/t-alpha t-interix alpha/t-interix alpha/t-ieee" |
| if test x$enable_threads = xyes ; then |
| thread_file='posix' |
| fi |
| if test x$stabs = xyes ; then |
| tm_file="${tm_file} dbxcoff.h" |
| fi |
| #prefix='$$INTERIX_ROOT'/usr/contrib |
| #local_prefix='$$INTERIX_ROOT'/usr/contrib |
| ;; |
| alpha*-*-linux*ecoff*) |
| echo "Configuration $machine no longer supported" 1>&2 |
| exit 1 |
| ;; |
| alpha*-*-linux*libc1*) |
| tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h" |
| target_cpu_default="MASK_GAS" |
| tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 alpha/t-alpha alpha/t-crtfm alpha/t-ieee" |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o" |
| gas=yes gnu_ld=yes |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| ;; |
| alpha*-*-linux*) |
| tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h" |
| target_cpu_default="MASK_GAS" |
| tmake_file="t-slibgcc-elf-ver t-linux alpha/t-crtfm alpha/t-alpha alpha/t-ieee" |
| ;; |
| alpha*-*-gnu*) |
| target_cpu_default="MASK_GAS" |
| tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee" |
| ;; |
| alpha*-*-freebsd*) |
| tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h" |
| target_cpu_default="MASK_GAS" |
| tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee" |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o" |
| ;; |
| alpha*-*-netbsd*) |
| tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h" |
| target_cpu_default="MASK_GAS" |
| tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee" |
| ;; |
| |
| alpha*-*-openbsd*) |
| tm_file="${cpu_type}/${cpu_type}.h ${tm_file}" |
| # default x-alpha is only appropriate for dec-osf. |
| target_cpu_default="MASK_GAS" |
| tmake_file="alpha/t-alpha alpha/t-ieee" |
| ;; |
| |
| alpha*-dec-osf[45]*) |
| xm_defines=POSIX |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| if test x$gas != xyes |
| then |
| extra_passes="mips-tfile mips-tdump" |
| fi |
| use_collect2=yes |
| tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4" |
| tm_file="${tm_file} alpha/osf.h" |
| extra_headers=va_list.h |
| case $machine in |
| *-*-osf4*) |
| # Some versions of OSF4 (specifically X4.0-9 296.7) have |
| # a broken tar, so we use cpio instead. |
| install_headers_dir=install-headers-cpio |
| # Set target_cpu_default except on 4.0a. |
| case $machine in |
| *-*-osf4.0a) ;; |
| *) target_cpu_default=MASK_SUPPORT_ARCH |
| esac |
| ;; |
| *-*-osf5*) |
| tm_file="${tm_file} alpha/osf5.h" |
| target_cpu_default=MASK_SUPPORT_ARCH |
| ;; |
| esac |
| ;; |
| alpha*-*-vxworks*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbx.h alpha/vxworks.h" |
| tmake_file="alpha/t-alpha alpha/t-ieee" |
| if [ x$gas != xyes ] |
| then |
| extra_passes="mips-tfile mips-tdump" |
| fi |
| use_collect2=yes |
| thread_file='vxworks' |
| ;; |
| alpha64-dec-*vms*) |
| xm_defines=POSIX |
| tm_file="${tm_file} alpha/vms.h alpha/vms64.h" |
| xm_file="alpha/xm-vms.h alpha/xm-vms64.h" |
| tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee" |
| xmake_file=alpha/x-vms |
| exeext=.exe |
| # This removes the cpu type and manufacturer components and |
| # replaces "." with "_" in the operating system version. |
| case $host in *-*-*vms*) |
| target_alias=`echo $host \ |
| | sed 's/.*-.*-\(.*\)$/\1/' | sed 's/\./_/g'` |
| ;; |
| esac |
| install_headers_dir=install-headers-cp |
| prefix=/gnu |
| local_prefix=/gnu |
| ;; |
| alpha*-dec-*vms*) |
| xm_defines=POSIX |
| tm_file="${tm_file} alpha/vms.h" |
| xm_file=alpha/xm-vms.h |
| tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee" |
| xmake_file=alpha/x-vms |
| exeext=.exe |
| # This removes the cpu type and manufacturer components and |
| # replaces "." with "_" in the operating system version. |
| case $host in *-*-*vms*) |
| target_alias=`echo $host \ |
| | sed 's/.*-.*-\(.*\)$/\1/' | sed 's/\./_/g'` |
| ;; |
| esac |
| install_headers_dir=install-headers-cp |
| prefix=/gnu |
| local_prefix=/gnu |
| ;; |
| arc-*-elf*) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| extra_parts="crtinit.o crtfini.o" |
| ;; |
| arm-*-coff* | armel-*-coff*) |
| tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h" |
| tmake_file=arm/t-arm-coff |
| ;; |
| arm-*-vxworks*) |
| tm_file="arm/semi.h arm/aout.h arm/coff.h arm/vxarm.h arm/arm.h" |
| tmake_file=arm/t-arm-coff |
| thread_file='vxworks' |
| ;; |
| arm-semi-aout | armel-semi-aout) |
| tm_file="arm/semi.h arm/aout.h arm/arm.h" |
| tmake_file=arm/t-semi |
| ;; |
| arm-semi-aof | armel-semi-aof) |
| tm_file="arm/semiaof.h arm/aof.h arm/arm.h" |
| tmake_file=arm/t-semi |
| ;; |
| arm*-*-freebsd*|strongarm*-*-freebsd*) |
| tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h" |
| tmake_file="${tmake_file} arm/t-strongarm-elf" |
| ;; |
| arm*-*-netbsdelf*) |
| tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h" |
| tmake_file="${tmake_file} arm/t-netbsd" |
| ;; |
| arm*-*-netbsd*) |
| tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h" |
| tmake_file="t-netbsd arm/t-netbsd" |
| extra_parts="" |
| use_collect2=yes |
| ;; |
| arm*-*-linux*) # ARM GNU/Linux with ELF |
| tm_file="dbxelf.h elfos.h arm/elf.h arm/linux-gas.h arm/linux-elf.h arm/aout.h arm/arm.h" |
| tmake_file="t-slibgcc-elf-ver t-linux arm/t-linux" |
| extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o" |
| gnu_ld=yes |
| case x${enable_threads} in |
| x | xyes | xpthreads | xposix) |
| thread_file='posix' |
| ;; |
| esac |
| ;; |
| arm*-*-uclinux*) # ARM ucLinux |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h" |
| tmake_file=arm/t-arm-elf |
| ;; |
| arm*-*-aout) |
| tm_file="arm/aout.h arm/arm.h" |
| tmake_file=arm/t-arm-aout |
| ;; |
| arm*-*-ecos-elf) |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h" |
| tmake_file=arm/t-arm-elf |
| ;; |
| arm*-*-rtems*) |
| xm_defines=POSIX |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h" |
| tmake_file="arm/t-arm-elf t-rtems" |
| if test x$enable_threads = xyes; then |
| thread_file='rtems' |
| fi |
| ;; |
| arm*-*-elf) |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h" |
| tmake_file=arm/t-arm-elf |
| ;; |
| arm*-*-conix*) |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/conix-elf.h arm/aout.h arm/arm.h" |
| tmake_file=arm/t-arm-elf |
| ;; |
| arm*-*-oabi) |
| tm_file="arm/unknown-elf-oabi.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h" |
| tmake_file=arm/t-arm-elf |
| ;; |
| arm-*-pe*) |
| tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h arm/pe.h" |
| tmake_file=arm/t-pe |
| extra_objs="pe.o" |
| ;; |
| avr-*-*) |
| ;; |
| c4x-*-rtems* | tic4x-*-rtems*) |
| xm_defines=POSIX |
| tmake_file="c4x/t-c4x t-rtems" |
| tm_file="c4x/c4x.h c4x/rtems.h rtems.h" |
| if test x$enable_threads = xyes; then |
| thread_file='rtems' |
| fi |
| c_target_objs="c4x-c.o" |
| cxx_target_objs="c4x-c.o" |
| ;; |
| c4x-* | tic4x-*) |
| tmake_file=c4x/t-c4x |
| c_target_objs="c4x-c.o" |
| cxx_target_objs="c4x-c.o" |
| ;; |
| cris-*-aout) |
| tm_file="dbxelf.h ${tm_file} cris/aout.h" |
| gas=yes |
| tmake_file="cris/t-cris cris/t-aout" |
| ;; |
| cris-*-elf | cris-*-none) |
| tm_file="dbxelf.h elfos.h ${tm_file}" |
| tmake_file="cris/t-cris cris/t-elfmulti" |
| gas=yes |
| ;; |
| cris-*-linux*) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h" |
| tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux" |
| ;; |
| d30v-*) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| ;; |
| dsp16xx-*) |
| ;; |
| fr30-*-elf) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| tmake_file=fr30/t-fr30 |
| extra_parts="crti.o crtn.o crtbegin.o crtend.o" |
| ;; |
| frv-*-elf) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h" |
| tmake_file=frv/t-frv |
| ;; |
| h8300-*-rtems*) |
| xm_defines=POSIX |
| tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems" |
| tm_file="h8300/h8300.h h8300/rtems.h rtems.h" |
| if test x$enable_threads = xyes; then |
| thread_file='rtems' |
| fi |
| ;; |
| h8300-*-elf*) |
| tmake_file="h8300/t-h8300 h8300/t-elf" |
| tm_file="h8300/h8300.h h8300/elf.h" |
| ;; |
| h8300-*-*) |
| ;; |
| hppa*64*-*-linux* | parisc*64*-*-linux*) |
| target_cpu_default="(MASK_PA_11 | MASK_PA_20)" |
| tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \ |
| pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h" |
| tmake_file=pa/t-linux64 |
| gas=yes gnu_ld=yes |
| ;; |
| hppa*-*-linux* | parisc*-*-linux*) |
| target_cpu_default="MASK_PA_11 | MASK_NO_SPACE_REGS" |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \ |
| pa/pa32-regs.h pa/pa32-linux.h" |
| tmake_file="t-slibgcc-elf-ver t-linux pa/t-linux" |
| ;; |
| hppa*-*-openbsd*) |
| target_cpu_default="MASK_PA_11" |
| tmake_file=pa/t-bsd |
| ;; |
| hppa1.1-*-pro*) |
| target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)" |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h" |
| tmake_file="pa/t-bsd pa/t-pro" |
| xmake_file="pa/x-ada" |
| ;; |
| hppa1.1-*-osf*) |
| target_cpu_default="MASK_PA_11" |
| tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-osf.h" |
| tmake_file="pa/t-bsd pa/t-pa" |
| xmake_file="pa/x-ada" |
| use_collect2=yes |
| ;; |
| hppa1.1-*-rtems*) |
| xm_defines=POSIX |
| target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)" |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h pa/rtems.h rtems.h" |
| tmake_file="pa/t-bsd pa/t-pro t-rtems" |
| xmake_file="pa/x-ada" |
| if test x$enable_threads = xyes; then |
| thread_file='rtems' |
| fi |
| ;; |
| hppa1.0-*-osf*) |
| tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-osf.h" |
| tmake_file="pa/t-bsd pa/t-pa" |
| xmake_file="pa/x-ada" |
| use_collect2=yes |
| ;; |
| hppa1.1-*-bsd*) |
| tm_file="${tm_file} pa/pa32-regs.h pa/som.h" |
| target_cpu_default="MASK_PA_11" |
| tmake_file="pa/t-bsd pa/t-pa" |
| xmake_file="pa/x-ada" |
| use_collect2=yes |
| ;; |
| hppa1.0-*-bsd*) |
| tm_file="${tm_file} pa/pa32-regs.h pa/som.h" |
| tmake_file="pa/t-bsd pa/t-pa" |
| xmake_file="pa/x-ada" |
| use_collect2=yes |
| ;; |
| hppa1.0-*-hpux7*) |
| tm_file="pa/pa-oldas.h ${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux7.h" |
| xm_defines=POSIX |
| tmake_file=pa/t-pa-hpux |
| install_headers_dir=install-headers-cpio |
| use_collect2=yes |
| ;; |
| hppa1.0-*-hpux8.0[0-2]*) |
| tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h" |
| xm_defines=POSIX |
| tmake_file=pa/t-pa-hpux |
| if test x$gas != xyes |
| then |
| tm_file="pa/pa-oldas.h ${tm_file}" |
| fi |
| install_headers_dir=install-headers-cpio |
| use_collect2=yes |
| ;; |
| hppa1.1-*-hpux8.0[0-2]*) |
| target_cpu_default="MASK_PA_11" |
| tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h" |
| xm_defines=POSIX |
| tmake_file=pa/t-pa-hpux |
| if test x$gas != xyes |
| then |
| tm_file="pa/pa-oldas.h ${tm_file}" |
| fi |
| install_headers_dir=install-headers-cpio |
| use_collect2=yes |
| ;; |
| hppa1.1-*-hpux8*) |
| target_cpu_default="MASK_PA_11" |
| tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h" |
| xm_defines=POSIX |
| tmake_file=pa/t-pa-hpux |
| install_headers_dir=install-headers-cpio |
| use_collect2=yes |
| ;; |
| hppa1.0-*-hpux8*) |
| tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h" |
| xm_defines=POSIX |
| tmake_file=pa/t-pa-hpux |
| install_headers_dir=install-headers-cpio |
| use_collect2=yes |
| ;; |
| hppa1.1-*-hpux10* | hppa2*-*-hpux10*) |
| target_cpu_default="MASK_PA_11" |
| tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h" |
| xm_defines=POSIX |
| tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib" |
| xmake_file="pa/x-ada" |
| if test x$enable_threads = x; then |
| enable_threads=$have_pthread_h |
| fi |
| case x${enable_threads} in |
| xyes | xdce) |
| tmake_file="${tmake_file} pa/t-dce-thr" |
| ;; |
| esac |
| install_headers_dir=install-headers-cpio |
| use_collect2=yes |
| ;; |
| hppa1.0-*-hpux10*) |
| tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h" |
| xm_defines=POSIX |
| tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib" |
| xmake_file="pa/x-ada" |
| if test x$enable_threads = x; then |
| enable_threads=$have_pthread_h |
| fi |
| case x${enable_threads} in |
| xyes | xdce) |
| tmake_file="${tmake_file} pa/t-dce-thr" |
| ;; |
| esac |
| install_headers_dir=install-headers-cpio |
| use_collect2=yes |
| ;; |
| hppa*64*-*-hpux11*) |
| xm_defines=POSIX |
| if test x$gas = xyes |
| then |
| tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \ |
| pa/pa64-regs.h pa/long_double.h pa/pa-hpux.h \ |
| pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h" |
| else |
| tm_file="pa/pa64-start.h ${tm_file} dbxelf.h pa/elf.h \ |
| pa/pa64-regs.h pa/long_double.h pa/pa-hpux.h \ |
| pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h" |
| fi |
| tmake_file="pa/t-pa64 pa/t-pa-hpux" |
| xmake_file="pa/x-ada" |
| target_cpu_default="(MASK_PA_11|MASK_PA_20|MASK_GAS)" |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o" |
| if test x$gnu_ld = xyes |
| then |
| target_cpu_default="${target_cpu_default}|MASK_GNU_LD" |
| fi |
| case x${enable_threads} in |
| xyes | xposix ) |
| thread_file=posix |
| ;; |
| esac |
| install_headers_dir=install-headers-cpio |
| ;; |
| hppa1.1-*-hpux11* | hppa2*-*-hpux11*) |
| target_cpu_default="MASK_PA_11" |
| tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h" |
| xm_defines=POSIX |
| tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib" |
| xmake_file="pa/x-ada" |
| case x${enable_threads} in |
| xyes | xposix ) |
| thread_file=posix |
| ;; |
| esac |
| install_headers_dir=install-headers-cpio |
| use_collect2=yes |
| ;; |
| hppa1.0-*-hpux11*) |
| tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h" |
| xm_defines=POSIX |
| tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib" |
| xmake_file="pa/x-ada" |
| case x${enable_threads} in |
| xyes | xposix ) |
| thread_file=posix |
| ;; |
| esac |
| install_headers_dir=install-headers-cpio |
| use_collect2=yes |
| ;; |
| hppa1.1-*-hpux* | hppa2*-*-hpux*) |
| target_cpu_default="MASK_PA_11" |
| tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hpux9.h" |
| xm_defines=POSIX |
| tmake_file=pa/t-pa-hpux |
| install_headers_dir=install-headers-cpio |
| use_collect2=yes |
| ;; |
| hppa1.0-*-hpux*) |
| tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hpux9.h" |
| xm_defines=POSIX |
| tmake_file=pa/t-pa-hpux |
| install_headers_dir=install-headers-cpio |
| use_collect2=yes |
| ;; |
| hppa1.1-*-hiux* | hppa2*-*-hiux*) |
| target_cpu_default="MASK_PA_11" |
| tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hiux.h" |
| xm_defines=POSIX |
| tmake_file=pa/t-pa-hpux |
| install_headers_dir=install-headers-cpio |
| use_collect2=yes |
| ;; |
| hppa1.0-*-hiux*) |
| tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hiux.h" |
| xm_defines=POSIX |
| tmake_file=pa/t-pa-hpux |
| install_headers_dir=install-headers-cpio |
| use_collect2=yes |
| ;; |
| hppa*-*-lites*) |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h" |
| target_cpu_default="MASK_PA_11" |
| tmake_file="pa/t-bsd pa/t-pa" |
| xmake_file="pa/x-ada" |
| use_collect2=yes |
| ;; |
| hppa*-*-mpeix*) |
| tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-mpeix.h" |
| tmake_file=pa/t-mpeix |
| echo "You must use gas. Assuming it is already installed." |
| gas=yes |
| install_headers_dir=install-headers-tar |
| use_collect2=yes |
| ;; |
| i370-*-opened*) # IBM 360/370/390 Architecture |
| xm_defines='POSIX FATAL_EXIT_CODE=12' |
| tm_file=i370/oe.h |
| tmake_file="i370/t-oe i370/t-i370" |
| c_target_objs="i370-c.o" |
| cxx_target_objs="i370-c.o" |
| ;; |
| i370-*-mvs*) |
| xm_defines='POSIX FATAL_EXIT_CODE=12' |
| tm_file=i370/mvs.h |
| tmake_file="i370/t-i370" |
| c_target_objs="i370-c.o" |
| cxx_target_objs="i370-c.o" |
| ;; |
| i370-*-linux*) |
| tm_file="dbxelf.h elfos.h svr4.h linux.h i370/linux.h ${tm_file}" |
| tmake_file="t-slibgcc-elf-ver t-linux" |
| # broken_install=yes |
| elf=yes |
| ;; |
| i[34567]86-*-darwin*) |
| tm_file="${tm_file} darwin.h i386/darwin.h" |
| tm_p_file="${tm_p_file} darwin-protos.h" |
| tmake_file="t-darwin" |
| extra_objs="darwin.o" |
| target_gtfiles="\$(srcdir)/config/darwin.c" |
| c_target_objs="darwin-c.o" |
| cxx_target_objs="darwin-c.o" |
| extra_parts="crt2.o" |
| # Darwin linker does collect2 functionality |
| use_collect2=no |
| ;; |
| i[34567]86-*-elf*) |
| xm_defines=POSIX |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h" |
| tmake_file="i386/t-i386elf t-svr4" |
| ;; |
| i[34567]86-ncr-sysv4*) # NCR 3000 - ix86 running system V.4 |
| xm_defines="POSIX SMALL_ARG_MAX" |
| if test x$stabs = xyes -a x$gas = xyes |
| then |
| tm_file=i386/sysv4gdb.h |
| else |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h" |
| fi |
| extra_parts="crtbegin.o crtend.o" |
| tmake_file=i386/t-crtpic |
| ;; |
| i[34567]86-*-netware) # Intel 80386's running netware |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h netware.h i386/netware.h" |
| tmake_file=i386/t-netware |
| ;; |
| i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*) |
| if test x$gas = xyes |
| then |
| tm_file="${tm_file} usegas.h" |
| fi |
| xm_defines="POSIX SMALL_ARG_MAX" |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h" |
| tmake_file=t-svr4 |
| extra_parts="crtbegin.o crtend.o" |
| install_headers_dir=install-headers-cpio |
| ;; |
| i[34567]86-sequent-sysv*) # would otherwise be caught by i?86-*-sysv* |
| echo "*** Configuration $machine not supported" 1>&2 |
| exit 1 |
| ;; |
| i[34567]86-wrs-vxworks*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/vxi386.h" |
| thread_file='vxworks' |
| ;; |
| i[34567]86-*-aout*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h" |
| ;; |
| i[34567]86-*-beoself* | i[34567]86-*-beos*) |
| xm_defines=POSIX |
| tmake_file='i386/t-beos i386/t-crtpic' |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h" |
| extra_parts='crtbegin.o crtend.o' |
| ;; |
| i[34567]86-*-freebsd2 | i[34567]86-*-freebsd2.* | i[34567]86-*-freebsd*aout*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/freebsd-aout.h" |
| tmake_file=t-freebsd |
| ;; |
| i[34567]86-*-freebsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h" |
| ;; |
| x86_64-*-freebsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h" |
| ;; |
| i[34567]86-*-netbsdelf*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h" |
| ;; |
| i[34567]86-*-netbsd*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h" |
| tmake_file=t-netbsd |
| extra_parts="" |
| use_collect2=yes |
| ;; |
| x86_64-*-netbsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h" |
| ;; |
| i[34567]86-*-openbsd*) |
| tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h ${tm_file}" |
| # needed to unconfuse gdb |
| tmake_file="t-libc-ok t-openbsd i386/t-openbsd" |
| # we need collect2 until our bug is fixed... |
| use_collect2=yes |
| ;; |
| i[34567]86-*-coff*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h" |
| ;; |
| i[34567]86-*-linux*oldld*) # would otherwise be caught by i?86-*-linux* |
| echo "*** Configuration $machine not supported" 1>&2 |
| exit 1 |
| ;; |
| i[34567]86-*-linux*aout*) # Intel 80386's running GNU/Linux |
| # with a.out format |
| tmake_file="t-linux-aout i386/t-crtstuff" |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h linux-aout.h i386/linux-aout.h" |
| gnu_ld=yes |
| ;; |
| i[34567]86-*-linux*libc1) # Intel 80386's running GNU/Linux |
| # with ELF format using the |
| # GNU/Linux C library 5 |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h" |
| tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 i386/t-crtstuff" |
| extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o" |
| gnu_ld=yes |
| if test x$enable_threads = xyes; then |
| thread_file='single' |
| fi |
| ;; |
| i[34567]86-*-linux*) # Intel 80386's running GNU/Linux |
| # with ELF format using glibc 2 |
| # aka GNU/Linux C library 6 |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h" |
| tmake_file="t-slibgcc-elf-ver t-linux i386/t-crtstuff" |
| ;; |
| x86_64-*-linux*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \ |
| i386/x86-64.h i386/linux64.h" |
| tmake_file="t-slibgcc-elf-ver t-linux i386/t-linux64" |
| ;; |
| i[34567]86-*-gnu*) |
| ;; |
| i[34567]86-go32-msdos | i[34567]86-*-go32*) |
| echo "GO32/DJGPP V1.X is no longer supported. Use *-pc-msdosdjgpp for DJGPP V2.X instead." |
| exit 1 |
| ;; |
| i[34567]86-pc-msdosdjgpp*) |
| xm_file=i386/xm-djgpp.h |
| tm_file="dbxcoff.h ${tm_file} i386/djgpp.h" |
| tmake_file=i386/t-djgpp |
| gnu_ld=yes |
| gas=yes |
| exeext=.exe |
| case $host in *pc-msdosdjgpp*) |
| target_alias=djgpp |
| ;; |
| esac |
| ;; |
| i[34567]86-moss-msdos* | i[34567]86-*-moss*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h i386/moss.h" |
| tmake_file=t-libc-ok |
| gnu_ld=yes |
| gas=yes |
| ;; |
| i[34567]86-*-lynxos*) |
| if test x$gas = xyes |
| then |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h lynx.h i386/lynx.h" |
| else |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h lynx-ng.h i386/lynx-ng.h" |
| fi |
| ;; |
| i[34567]86-*-mach*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/mach.h" |
| # tmake_file=t-libc-ok |
| use_collect2=yes |
| ;; |
| i[34567]86-go32-rtems* | i[34567]86-*-rtemscoff*) |
| # would otherwise be caught by i?86-*-rtems* |
| echo "*** Configuration $machine not supported" 1>&2 |
| exit 1 |
| ;; |
| i[34567]86-*-rtems*) |
| xm_defines=POSIX |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h" |
| extra_parts="crtbegin.o crtend.o crti.o crtn.o" |
| tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems" |
| if test x$enable_threads = xyes; then |
| thread_file='rtems' |
| fi |
| ;; |
| i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5 |
| xm_defines=POSIX |
| install_headers_dir=install-headers-cpio |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h" |
| if test x$gas = xyes |
| then |
| tm_file="usegas.h ${tm_file}" |
| fi |
| tmake_file=i386/t-sco5 |
| extra_parts="crtbegin.o crtend.o" |
| ;; |
| i[34567]86-*-solaris2*) |
| xm_defines="POSIX SMALL_ARG_MAX" |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h i386/sol2.h" |
| tmake_file="i386/t-sol2 t-svr4" |
| if test x$gnu_ld = xyes; then |
| tmake_file="$tmake_file t-slibgcc-elf-ver" |
| else |
| tmake_file="$tmake_file t-slibgcc-sld" |
| fi |
| extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o" |
| if test x${enable_threads} = x; then |
| enable_threads=$have_pthread_h |
| if test x${enable_threads} = x; then |
| enable_threads=$have_thread_h |
| fi |
| fi |
| if test x${enable_threads} = xyes; then |
| if test x${have_pthread_h} = xyes; then |
| thread_file='posix' |
| else |
| thread_file='solaris' |
| fi |
| fi |
| ;; |
| i[34567]86-*-sysv5*) # Intel x86 on System V Release 5 |
| xm_defines=POSIX |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h" |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| tmake_file="i386/t-crtpic t-svr4" |
| extra_parts="crtbegin.o crtend.o" |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| ;; |
| i[34567]86-*-sysv4*) # Intel 80386's running system V.4 |
| xm_defines="POSIX SMALL_ARG_MAX" |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h" |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| tmake_file="i386/t-crtpic t-svr4" |
| extra_parts="crtbegin.o crtend.o" |
| ;; |
| i[34567]86-*-udk*) # Intel x86 on SCO UW/OSR5 Dev Kit |
| xm_defines=POSIX |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h i386/udk.h" |
| tmake_file="i386/t-crtpic i386/t-udk t-svr4" |
| extra_parts="crtbegin.o crtend.o" |
| install_headers_dir=install-headers-cpio |
| ;; |
| i[34567]86-*-sysv*) # Intel 80386's running system V |
| xm_defines=POSIX |
| if test x$gas = xyes |
| then |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/svr3gas.h i386/svr3dbx.h" |
| tmake_file=i386/t-svr3dbx |
| extra_parts="svr3.ifile svr3z.ifile" |
| else |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/svr3gas.h" |
| extra_parts="crtbegin.o crtend.o" |
| tmake_file=i386/t-crtstuff |
| fi |
| else |
| tm_file="${tm_file} svr3.h i386/unix.h i386/att.h i386/sysv3.h" |
| extra_parts="crtbegin.o crtend.o" |
| tmake_file=i386/t-crtstuff |
| fi |
| tmake_file="$tmake_file i386/t-crtpic" |
| ;; |
| i386-*-vsta) # Intel 80386's running VSTa kernel |
| xm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/xm-vsta.h" |
| tm_file="${tm_file} i386/vsta.h" |
| ;; |
| i[34567]86-*-win32) |
| xm_defines=POSIX |
| xm_file=i386/xm-cygwin.h |
| tmake_file=i386/t-cygwin |
| tm_file="${tm_file} i386/win32.h" |
| extra_objs=winnt.o |
| if test x$enable_threads = xyes; then |
| thread_file='win32' |
| fi |
| exeext=.exe |
| ;; |
| i[34567]86-*-pe | i[34567]86-*-cygwin*) |
| xm_defines=POSIX |
| xm_file=i386/xm-cygwin.h |
| tmake_file=i386/t-cygwin |
| tm_file=i386/cygwin.h |
| extra_objs=winnt.o |
| if test x$enable_threads = xyes; then |
| thread_file='win32' |
| fi |
| exeext=.exe |
| ;; |
| i[34567]86-*-mingw32*) |
| tm_file=i386/mingw32.h |
| xm_defines=POSIX |
| xm_file=i386/xm-mingw32.h |
| tmake_file="i386/t-cygwin i386/t-mingw32" |
| extra_objs=winnt.o |
| if test x$enable_threads = xyes; then |
| thread_file='win32' |
| fi |
| exeext=.exe |
| case $machine in |
| *mingw32crt*) |
| tm_file="${tm_file} i386/crtdll.h" |
| ;; |
| *minwg32msv* | *mingw32*) |
| ;; |
| esac |
| ;; |
| i[34567]86-*-uwin*) |
| tm_file="i386/cygwin.h i386/uwin.h" |
| tmake_file="i386/t-cygwin i386/t-uwin" |
| extra_objs=winnt.o |
| if test x$enable_threads = xyes; then |
| thread_file='win32' |
| fi |
| exeext=.exe |
| ;; |
| i[34567]86-*-interix3*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h" |
| xm_file="i386/xm-i386-interix.h" |
| xm_defines=POSIX |
| tmake_file="t-interix i386/t-interix" |
| extra_objs=winnt.o |
| xmake_file="x-interix" |
| if test x$enable_threads = xyes ; then |
| thread_file='posix' |
| fi |
| if test x$stabs = xyes ; then |
| tm_file="${tm_file} dbxcoff.h" |
| fi |
| ;; |
| i[34567]86-*-interix*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h interix.h" |
| xm_file="i386/xm-i386-interix.h" |
| xm_defines=POSIX |
| tmake_file="t-interix i386/t-interix" |
| extra_objs=winnt.o |
| if test x$enable_threads = xyes ; then |
| thread_file='posix' |
| fi |
| if test x$stabs = xyes ; then |
| tm_file="${tm_file} dbxcoff.h" |
| fi |
| ;; |
| i960-wrs-vxworks5 | i960-wrs-vxworks5.0*) |
| tm_file="${tm_file} i960/vx960.h" |
| tmake_file=i960/t-vxworks960 |
| use_collect2=yes |
| thread_file='vxworks' |
| c_target_objs="i960-c.o" |
| cxx_target_objs="i960-c.o" |
| ;; |
| i960-wrs-vxworks5* | i960-wrs-vxworks) |
| tm_file="${tm_file} dbxcoff.h i960/i960-coff.h i960/vx960-coff.h" |
| tmake_file=i960/t-vxworks960 |
| use_collect2=yes |
| thread_file='vxworks' |
| c_target_objs="i960-c.o" |
| cxx_target_objs="i960-c.o" |
| ;; |
| i960-wrs-vxworks*) |
| tm_file="${tm_file} i960/vx960.h" |
| tmake_file=i960/t-vxworks960 |
| use_collect2=yes |
| thread_file='vxworks' |
| c_target_objs="i960-c.o" |
| cxx_target_objs="i960-c.o" |
| ;; |
| i960-*-coff*) |
| tm_file="${tm_file} dbxcoff.h i960/i960-coff.h libgloss.h" |
| tmake_file=i960/t-960bare |
| c_target_objs="i960-c.o" |
| cxx_target_objs="i960-c.o" |
| ;; |
| i960-*-rtems) |
| xm_defines=POSIX |
| tmake_file="i960/t-960bare t-rtems" |
| tm_file="${tm_file} dbxcoff.h i960/i960-coff.h i960/rtems.h rtems.h" |
| if test x$enable_threads = xyes; then |
| thread_file='rtems' |
| fi |
| c_target_objs="i960-c.o" |
| cxx_target_objs="i960-c.o" |
| ;; |
| i960-*-*) # Default i960 environment. |
| use_collect2=yes |
| tmake_file=i960/t-960bare |
| c_target_objs="i960-c.o" |
| cxx_target_objs="i960-c.o" |
| ;; |
| ia64*-*-aix*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/aix.h" |
| tmake_file="ia64/t-ia64 ia64/t-aix" |
| target_cpu_default="MASK_GNU_AS|MASK_GNU_LD" |
| extra_parts="crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o" |
| ;; |
| ia64*-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h" |
| tmake_file="ia64/t-ia64" |
| target_cpu_default="0" |
| if test x$gas = xyes |
| then |
| target_cpu_default="${target_cpu_default}|MASK_GNU_AS" |
| fi |
| if test x$gnu_ld = xyes |
| then |
| target_cpu_default="${target_cpu_default}|MASK_GNU_LD" |
| fi |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o" |
| ;; |
| ia64*-*-freebsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h" |
| target_cpu_default="MASK_GNU_AS|MASK_GNU_LD" |
| tmake_file="${tmake_file} ia64/t-ia64" |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o" |
| ;; |
| ia64*-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h" |
| tmake_file="t-slibgcc-elf-ver t-linux ia64/t-ia64 ia64/t-glibc" |
| target_cpu_default="MASK_GNU_AS|MASK_GNU_LD" |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o" |
| if test x"$use_libunwind_exceptions" = xyes; then |
| tmake_file="$tmake_file t-libunwind" |
| fi |
| ;; |
| ia64*-*-hpux*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h ia64/hpux_longdouble.h" |
| tmake_file="ia64/t-ia64 ia64/t-hpux" |
| target_cpu_default="MASK_GNU_AS" |
| case x$enable_threads in |
| xyes | xposix ) |
| thread_file=posix |
| ;; |
| esac |
| use_collect2=no |
| c_target_objs="ia64-c.o" |
| cxx_target_objs="ia64-c.o" |
| ;; |
| ip2k-*-elf) |
| ;; |
| m32r-*-elf*) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o" |
| ;; |
| # m68hc11 and m68hc12 share the same machine description. |
| m68hc11-*-*|m6811-*-*) |
| tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h" |
| tm_p_file="m68hc11/m68hc11-protos.h" |
| md_file="m68hc11/m68hc11.md" |
| out_file="m68hc11/m68hc11.c" |
| tmake_file="m68hc11/t-m68hc11-gas" |
| ;; |
| m68hc12-*-*|m6812-*-*) |
| tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h" |
| tm_p_file="m68hc11/m68hc11-protos.h" |
| md_file="m68hc11/m68hc11.md" |
| out_file="m68hc11/m68hc11.c" |
| tmake_file="m68hc11/t-m68hc11-gas" |
| ;; |
| m68000-hp-bsd*) # HP 9000/200 running BSD |
| tm_file=m68k/hp2bsd.h |
| use_collect2=yes |
| ;; |
| m68000-hp-hpux*) # HP 9000 series 300 |
| xm_defines=POSIX |
| if test x$gas = xyes |
| then |
| tm_file=m68k/hp310g.h |
| else |
| tm_file=m68k/hp310.h |
| fi |
| tmake_file=m68k/t-hp320 |
| install_headers_dir=install-headers-cpio |
| use_collect2=yes |
| ;; |
| m68000-sun-sunos3*) |
| tm_file=m68k/sun2.h |
| use_collect2=yes |
| ;; |
| m68000-sun-sunos4*) |
| tm_file=m68k/sun2o4.h |
| use_collect2=yes |
| ;; |
| m68000-att-sysv*) |
| xm_defines=POSIX |
| if test x$gas = xyes |
| then |
| tm_file=m68k/3b1g.h |
| else |
| tm_file=m68k/3b1.h |
| fi |
| use_collect2=yes |
| ;; |
| m68k-atari-sysv4*) # Atari variant of V.4. |
| tm_file=m68k/atari.h |
| xm_defines=POSIX |
| tmake_file=t-svr4 |
| extra_parts="crtbegin.o crtend.o" |
| ;; |
| m68k-apollo-sysv* | m68k-bull-sysv*) |
| # can otherwise be caught by m68k-*-sysv4* |
| echo "*** Configuration $machine not supported" 1>&2 |
| exit 1 |
| ;; |
| m68k-motorola-sysv*) |
| tm_file=m68k/mot3300.h |
| xm_defines=POSIX |
| if test x$gas = xyes |
| then |
| if test x$gnu_ld = xyes |
| then |
| tmake_file=m68k/t-mot3300-gald |
| else |
| tmake_file=m68k/t-mot3300-gas |
| use_collect2=yes |
| fi |
| else |
| if test x$gnu_ld = xyes |
| then |
| tmake_file=m68k/t-mot3300-gld |
| else |
| tmake_file=m68k/t-mot3300 |
| use_collect2=yes |
| fi |
| fi |
| gdb_needs_out_file_path=yes |
| extra_parts="crt0.o mcrt0.o" |
| ;; |
| m68k-ncr-sysv*) # NCR Tower 32 SVR3 |
| tm_file=m68k/tower-as.h |
| xm_defines=POSIX |
| extra_parts="crtbegin.o crtend.o" |
| ;; |
| m68k-plexus-sysv*) |
| tm_file=m68k/plexus.h |
| xm_defines=POSIX |
| use_collect2=yes |
| ;; |
| m68k-tti-*) |
| tm_file=m68k/pbb.h |
| xm_defines=POSIX |
| ;; |
| m68k-crds-unos*) |
| xm_defines=POSIX |
| tm_file=m68k/crds.h |
| use_collect2=yes |
| ;; |
| m68k-cbm-sysv4*) # Commodore variant of V.4. |
| tm_file=m68k/amix.h |
| xm_defines=POSIX |
| tmake_file=t-svr4 |
| extra_parts="crtbegin.o crtend.o" |
| ;; |
| m68k-ccur-rtu) |
| tm_file=m68k/ccur-GAS.h |
| use_collect2=yes |
| ;; |
| m68k-hp-bsd4.4*) # HP 9000/3xx running 4.4bsd |
| tm_file=m68k/hp3bsd44.h |
| use_collect2=yes |
| ;; |
| m68k-hp-bsd*) # HP 9000/3xx running Berkeley Unix |
| tm_file=m68k/hp3bsd.h |
| use_collect2=yes |
| ;; |
| m68k-hp-hpux7*) # HP 9000 series 300 running HPUX version 7. |
| xm_defines=POSIX |
| if test x$gas = xyes |
| then |
| xmake_file=m68k/x-hp320g |
| tm_file=m68k/hp320g.h |
| else |
| xmake_file=m68k/x-hp320 |
| tm_file=m68k/hpux7.h |
| fi |
| install_headers_dir=install-headers-cpio |
| use_collect2=yes |
| ;; |
| m68k-hp-hpux*) # HP 9000 series 300 |
| xm_defines=POSIX |
| if test x$gas = xyes |
| then |
| xmake_file=m68k/x-hp320g |
| tm_file=m68k/hp320g.h |
| else |
| xmake_file=m68k/x-hp320 |
| tm_file=m68k/hp320.h |
| fi |
| install_headers_dir=install-headers-cpio |
| use_collect2=yes |
| ;; |
| m68k-sun-mach*) |
| tm_file=m68k/sun3mach.h |
| use_collect2=yes |
| ;; |
| m68k-sun-sunos3*) |
| if test x$with_fp = xno |
| then |
| tm_file=m68k/sun3n3.h |
| else |
| tm_file=m68k/sun3o3.h |
| fi |
| use_collect2=yes |
| ;; |
| m68k-sun-sunos*) # For SunOS 4 (the default). |
| if test x$with_fp = xno |
| then |
| tm_file=m68k/sun3n.h |
| else |
| tm_file=m68k/sun3.h |
| fi |
| use_collect2=yes |
| ;; |
| m68k-wrs-vxworks*) |
| tm_file=m68k/vxm68k.h |
| tmake_file=m68k/t-vxworks68 |
| thread_file='vxworks' |
| ;; |
| m68k-*-aout*) |
| tmake_file=m68k/t-m68kbare |
| tm_file="m68k/m68k-aout.h libgloss.h" |
| ;; |
| m68k-*-coff*) |
| tmake_file=m68k/t-m68kbare |
| tm_file="m68k/m68k-coff.h dbx.h" |
| ;; |
| m68020-*-elf* | m68k-*-elf*) |
| tm_file="m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h" |
| xm_defines=POSIX |
| tmake_file=m68k/t-m68kelf |
| extra_parts="crtbegin.o crtend.o" |
| ;; |
| m68010-*-netbsdelf* | m68k*-*-netbsdelf*) |
| tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h" |
| case $machine in |
| m68010*) |
| target_cpu_default="0" |
| ;; |
| *) |
| target_cpu_default="MASK_68020|MASK_68881|MASK_BITFIELD" |
| ;; |
| esac |
| ;; |
| m68k*-*-netbsd*) |
| tm_file=m68k/netbsd.h |
| tmake_file=t-netbsd |
| extra_parts="" |
| use_collect2=yes |
| ;; |
| m68k*-*-openbsd*) |
| # needed to unconfuse gdb |
| tmake_file="t-libc-ok t-openbsd m68k/t-openbsd" |
| # we need collect2 until our bug is fixed... |
| use_collect2=yes |
| ;; |
| m68k-*-sysv4*) # Motorola m68k's running system V.4 |
| tm_file=m68k/m68kv4.h |
| xm_defines=POSIX |
| tmake_file=t-svr4 |
| extra_parts="crtbegin.o crtend.o" |
| ;; |
| m68k-*-linux*aout*) # Motorola m68k's running GNU/Linux |
| # with a.out format |
| tm_file=m68k/linux-aout.h |
| tmake_file="t-linux-aout m68k/t-linux-aout" |
| gnu_ld=yes |
| ;; |
| m68k-*-linux*libc1) # Motorola m68k's running GNU/Linux |
| # with ELF format using the |
| # GNU/Linux C library 5 |
| tm_file=m68k/linux.h |
| tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 m68k/t-linux" |
| extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o" |
| gnu_ld=yes |
| ;; |
| m68k-*-linux*) # Motorola m68k's running GNU/Linux |
| # with ELF format using glibc 2 |
| # aka the GNU/Linux C library 6. |
| tm_file=m68k/linux.h |
| tmake_file="t-slibgcc-elf-ver t-linux m68k/t-linux" |
| ;; |
| m68k-*-psos*) |
| tmake_file=m68k/t-m68kbare |
| tm_file=m68k/m68k-psos.h |
| ;; |
| m68k-*-rtemscoff*) # would otherwise be caught by m68k-*-rtems* |
| echo "*** Configuration $machine not supported" 1>&2 |
| exit 1 |
| ;; |
| m68k-*-rtems*) |
| xm_defines=POSIX |
| tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems" |
| tm_file="m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h" |
| extra_parts="crtbegin.o crtend.o" |
| if test x$enable_threads = xyes; then |
| thread_file='rtems' |
| fi |
| ;; |
| m88k-*-aout*) |
| xm_defines=POSIX |
| tm_file=m88k/m88k-aout.h |
| ;; |
| m88k-*-openbsd*) |
| tmake_file="${tmake_file} m88k/t-luna-gas" |
| tm_file="m88k/aout-dbx.h aoutos.h m88k/m88k.h openbsd.h ${tm_file}" |
| ;; |
| m88k-*-sysv4*) |
| xm_defines=POSIX |
| tm_file="dbxelf.h elfos.h svr4.h m88k/sysv4.h" |
| extra_parts="crtbegin.o crtend.o" |
| tmake_file=m88k/t-sysv4 |
| ;; |
| mcore-*-elf) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h" |
| tmake_file=mcore/t-mcore |
| ;; |
| mcore-*-pe*) |
| tm_file=mcore/mcore-pe.h |
| tmake_file=mcore/t-mcore-pe |
| ;; |
| mips-sgi-irix6*o32) # SGI System V.4., IRIX 6, O32 ABI |
| if test x$gas = xyes |
| then |
| tm_file="mips/iris5.h mips/iris5gas.h mips/iris6-o32-gas.h" |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h mips/dbxmdebug.h" |
| fi |
| tmake_file=mips/t-iris5-gas |
| else |
| tm_file="mips/iris5.h mips/iris6-o32-as.h" |
| tmake_file=mips/t-iris5-as |
| fi |
| tm_file="${tm_file} mips/iris6-o32.h" |
| tmake_file="${tmake_file} mips/t-iris mips/t-iris5-6" |
| xm_defines=POSIX |
| xm_file=mips/xm-iris5.h |
| # mips-tfile doesn't work yet |
| # See comment in mips/iris5.h file. |
| use_collect2=yes |
| # if test x$enable_threads = xyes; then |
| # thread_file='irix' |
| # fi |
| ;; |
| mips-sgi-irix6*) # SGI System V.4., IRIX 6 |
| if test "x$gnu_ld" = xyes |
| then |
| tm_file="mips/iris6.h mips/iris6gld.h" |
| else |
| tm_file=mips/iris6.h |
| fi |
| tmake_file="mips/t-iris mips/t-iris5-6 mips/t-iris6" |
| xm_defines=POSIX |
| # if test x$enable_threads = xyes; then |
| # thread_file='irix' |
| # fi |
| ;; |
| mips-wrs-vxworks) |
| tm_file="${tm_file} mips/elf.h mips/vxworks.h" |
| tmake_file=mips/t-ecoff |
| gas=yes |
| gnu_ld=yes |
| extra_parts="crtbegin.o crtend.o" |
| thread_file='vxworks' |
| ;; |
| mips-sgi-irix5cross64) # Irix5 host, Irix 6 target, cross64 |
| tm_file="mips/iris6.h mips/cross64.h" |
| xm_defines=POSIX |
| xm_file=mips/xm-iris5.h |
| tmake_file="mips/t-iris mips/t-cross64" |
| # See comment in mips/iris[56].h files. |
| use_collect2=yes |
| # if test x$enable_threads = xyes; then |
| # thread_file='irix' |
| # fi |
| ;; |
| mips-sni-sysv4) |
| if test x$gas = xyes |
| then |
| if test x$stabs = xyes |
| then |
| tm_file=mips/iris5gdb.h |
| else |
| tm_file="mips/sni-svr4.h mips/sni-gas.h" |
| fi |
| else |
| tm_file=mips/sni-svr4.h |
| fi |
| xm_defines=POSIX |
| if test x$gnu_ld != xyes |
| then |
| use_collect2=yes |
| fi |
| ;; |
| mips-sgi-irix5*) # SGI System V.4., IRIX 5 |
| if test x$gas = xyes |
| then |
| tm_file="mips/iris5.h mips/iris5gas.h" |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h mips/dbxmdebug.h" |
| fi |
| tmake_file=mips/t-iris5-gas |
| else |
| tm_file=mips/iris5.h |
| tmake_file=mips/t-iris5-as |
| fi |
| tmake_file="${tmake_file} mips/t-iris mips/t-iris5-6" |
| xm_defines=POSIX |
| xm_file=mips/xm-iris5.h |
| # mips-tfile doesn't work yet |
| # See comment in mips/iris5.h file. |
| use_collect2=yes |
| # if test x$enable_threads = xyes; then |
| # thread_file='irix' |
| # fi |
| ;; |
| mips-sgi-*) # would otherwise be caught by mips-*-elf* |
| echo "*** Configuration $machine not supported" 1>&2 |
| exit 1 |
| ;; |
| mips*-*-netbsd*) # NetBSD/mips, either endian. |
| target_cpu_default="MASK_GAS|MASK_ABICALLS" |
| tm_file="elfos.h ${tm_file} mips/netbsd.h" |
| tmake_file="${tmake_file} mips/t-netbsd" |
| ;; |
| mips*-*-linux*) # Linux MIPS, either endian. |
| tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h" |
| case $machine in |
| mipsisa32*-*) |
| target_cpu_default="MASK_SOFT_FLOAT" |
| tm_defines="MIPS_ISA_DEFAULT=32" |
| ;; |
| esac |
| tmake_file="t-slibgcc-elf-ver t-linux mips/t-linux" |
| ;; |
| mips*el-*-openbsd*) # mips little endian |
| target_cpu_default="MASK_GAS|MASK_ABICALLS" |
| ;; |
| mips*-*-openbsd*) # mips big endian |
| target_cpu_default="MASK_GAS|MASK_ABICALLS" |
| tm_file="mips/openbsd-be.h ${tm_file}" |
| ;; |
| mips-*-ecoff* | mipsel-*-ecoff*) |
| if test x$stabs = xyes; then |
| tm_file="${tm_file} dbx.h" |
| fi |
| tmake_file=mips/t-ecoff |
| ;; |
| mipsisa32-*-elf* | mipsisa32el-*-elf*) |
| tm_file="${tm_file} mips/elf.h" |
| tmake_file=mips/t-isa3264 |
| tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_MEABI" |
| ;; |
| mipsisa64-*-elf* | mipsisa64el-*-elf*) |
| tm_file="${tm_file} mips/elf.h" |
| tmake_file=mips/t-isa3264 |
| target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS" |
| tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_MEABI" |
| ;; |
| mipsisa64sr71k-*-elf*) |
| tm_file="${tm_file} mips/elf.h" |
| tmake_file=mips/t-sr71k |
| target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS" |
| tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_MEABI" |
| ;; |
| mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*) |
| tm_file="${tm_file} mips/elf.h" |
| tmake_file=mips/t-elf |
| target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS" |
| tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64" |
| ;; |
| mips-*-elf* | mipsel-*-elf*) |
| tm_file="${tm_file} mips/elf.h" |
| tmake_file=mips/t-elf |
| ;; |
| mips64-*-elf* | mips64el-*-elf*) |
| tm_file="${tm_file} mips/elf64.h" |
| tmake_file=mips/t-elf |
| target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS" |
| tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64" |
| ;; |
| mips64vr-*-elf* | mips64vrel-*-elf*) |
| tm_file="mips/vr.h ${tm_file} mips/elf64.h" |
| tm_defines="MIPS_ABI_DEFAULT=ABI_O64 MIPS_MARCH_CONTROLS_SOFT_FLOAT=1" |
| tmake_file=mips/t-vr |
| ;; |
| mips64orion-*-elf* | mips64orionel-*-elf*) |
| tm_file="${tm_file} mips/elforion.h mips/elf64.h" |
| tmake_file=mips/t-elf |
| tmake_file=mips/t-elf |
| target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS" |
| tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64" |
| ;; |
| mips64orion-*-rtems*) |
| xm_defines=POSIX |
| tm_file="${tm_file} mips/elforion.h mips/elf64.h mips/rtems64.h rtems.h" |
| tmake_file="mips/t-elf t-rtems" |
| tmake_file=mips/t-elf |
| target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS" |
| tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64" |
| if test x$enable_threads = xyes; then |
| thread_file='rtems' |
| fi |
| ;; |
| mips*-*-rtems*) |
| xm_defines=POSIX |
| tm_file="${tm_file} mips/elf.h mips/rtems.h rtems.h" |
| tmake_file="mips/t-elf t-rtems mips/t-rtems" |
| if test x$enable_threads = xyes; then |
| thread_file='rtems' |
| fi |
| ;; |
| mipstx39-*-elf* | mipstx39el-*-elf*) |
| tm_file="${tm_file} mips/r3900.h mips/elf.h" |
| tmake_file=mips/t-r3900 |
| ;; |
| mmix-knuth-mmixware) |
| ;; |
| mn10200-*-*) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| use_collect2=no |
| ;; |
| mn10300-*-*) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| use_collect2=no |
| ;; |
| ns32k-*-netbsdelf*) |
| echo "GCC does not yet support the ${machine} target"; exit 1 |
| ;; |
| ns32k-*-netbsd*) |
| tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h" |
| # On NetBSD, the headers are already okay, except for math.h. |
| tmake_file="t-netbsd ns32k/t-ns32k" |
| extra_parts="" |
| use_collect2=yes |
| ;; |
| pdp11-*-bsd) |
| tm_file="${tm_file} pdp11/2bsd.h" |
| ;; |
| pdp11-*-*) |
| ;; |
| avr-*-*) |
| ;; |
| ns32k-*-openbsd*) |
| # Nothing special |
| ;; |
| romp-*-openbsd*) |
| # Nothing special |
| ;; |
| powerpc-*-openbsd*) |
| tmake_file="${tmake_file} rs6000/t-rs6000 rs6000/t-openbsd" |
| extra_headers= |
| ;; |
| powerpc64-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux64.h" |
| out_file=rs6000/rs6000.c |
| tmake_file="rs6000/t-rs6000 t-slibgcc-elf-ver t-linux rs6000/t-linux64" |
| ;; |
| powerpc64-*-gnu*) |
| tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h" |
| out_file=rs6000/rs6000.c |
| tmake_file="rs6000/t-rs6000 t-slibgcc-elf-ver t-gnu rs6000/t-linux64" |
| ;; |
| powerpc-*-beos*) |
| tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h" |
| xm_defines=POSIX |
| tmake_file=rs6000/t-beos |
| extra_headers= |
| ;; |
| powerpc-*-darwin*) |
| tm_file="${tm_file} darwin.h rs6000/darwin.h" |
| tm_p_file="${tm_p_file} darwin-protos.h" |
| tmake_file="rs6000/t-rs6000 t-darwin rs6000/t-darwin" |
| extra_objs="darwin.o" |
| target_gtfiles="\$(srcdir)/config/darwin.c" |
| c_target_objs="darwin-c.o" |
| cxx_target_objs="darwin-c.o" |
| extra_parts="crt2.o" |
| # Darwin linker does collect2 functionality |
| use_collect2=no |
| extra_headers=altivec.h |
| ;; |
| powerpc*-*-freebsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h" |
| xm_file=rs6000/xm-sysv4.h |
| out_file=rs6000/rs6000.c |
| tmake_file="rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" |
| ;; |
| powerpc-*-sysv*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h" |
| xm_defines=POSIX |
| tmake_file="rs6000/t-ppcos rs6000/t-ppccomm" |
| ;; |
| powerpc-*-netbsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h" |
| tmake_file="${tmake_file} rs6000/t-netbsd" |
| ;; |
| powerpc-*-chorusos*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h" |
| tmake_file="rs6000/t-ppcos rs6000/t-ppccomm" |
| case x${enable_threads} in |
| xyes | xpthreads | xposix) |
| thread_file='posix' |
| ;; |
| esac |
| ;; |
| powerpc-*-eabiaix*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabiaix.h" |
| tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm" |
| ;; |
| powerpc-*-eabispe*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h" |
| tmake_file="rs6000/t-ppcendian rs6000/t-ppccomm" |
| ;; |
| powerpc-*-eabisimaltivec*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h" |
| tmake_file="rs6000/t-ppcendian rs6000/t-ppccomm" |
| ;; |
| powerpc-*-eabisim*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h" |
| tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm" |
| ;; |
| powerpc-*-elf*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h" |
| tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm" |
| ;; |
| powerpc-*-eabialtivec*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h" |
| tmake_file="rs6000/t-ppcendian rs6000/t-ppccomm" |
| ;; |
| powerpc-*-eabi*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h" |
| tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm" |
| ;; |
| powerpc-*-rtems*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h" |
| tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm" |
| if test x$enable_threads = xyes; then |
| thread_file='rtems' |
| fi |
| ;; |
| powerpc-*-linux*libc1) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h" |
| out_file=rs6000/rs6000.c |
| tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-linux t-linux-gnulibc1 rs6000/t-ppccomm" |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| ;; |
| powerpc-*-linux-gnualtivec*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h" |
| out_file=rs6000/rs6000.c |
| tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm" |
| ;; |
| powerpc-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h" |
| out_file=rs6000/rs6000.c |
| tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm" |
| ;; |
| powerpc-*-gnu-gnualtivec*) |
| tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h" |
| out_file=rs6000/rs6000.c |
| tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm" |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| ;; |
| powerpc-*-gnu*) |
| tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h" |
| out_file=rs6000/rs6000.c |
| tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm" |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| ;; |
| powerpc-wrs-vxworks*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/vxppc.h" |
| tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm" |
| thread_file='vxworks' |
| ;; |
| powerpc-wrs-windiss*) |
| xm_defines=POSIX |
| tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h" |
| tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm" |
| thread_file="" |
| ;; |
| powerpcle-wrs-vxworks*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/vxppc.h" |
| tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm" |
| thread_file='vxworks' |
| ;; |
| powerpcle-*-sysv*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h" |
| xm_defines=POSIX |
| tmake_file="rs6000/t-ppcos rs6000/t-ppccomm" |
| ;; |
| powerpcle-*-elf*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h" |
| tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm" |
| ;; |
| powerpcle-*-eabisim*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h" |
| tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm" |
| ;; |
| powerpcle-*-eabi*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h" |
| tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm" |
| ;; |
| rs6000-ibm-aix3.[01]*) |
| xm_defines=POSIX |
| tm_file="${tm_file} rs6000/aix.h rs6000/aix31.h rs6000/xcoff.h" |
| use_collect2=yes |
| ;; |
| rs6000-ibm-aix3.2.[456789]* | powerpc-ibm-aix3.2.[456789]*) |
| xm_defines=POSIX |
| tm_file="${tm_file} rs6000/aix.h rs6000/aix3newas.h rs6000/xcoff.h" |
| tmake_file=rs6000/t-newas |
| use_collect2=yes |
| extra_headers= |
| ;; |
| rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*) |
| xm_defines=POSIX |
| tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h" |
| tmake_file=rs6000/t-newas |
| use_collect2=yes |
| extra_headers= |
| ;; |
| rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*) |
| xm_defines=POSIX |
| tm_file="${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h" |
| tmake_file=rs6000/t-aix43 |
| use_collect2=yes |
| thread_file='aix' |
| extra_headers= |
| ;; |
| rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*) |
| xm_defines=POSIX |
| tm_file="${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h" |
| tmake_file=rs6000/t-aix43 |
| use_collect2=yes |
| thread_file='aix' |
| extra_headers= |
| ;; |
| rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*) |
| xm_defines=POSIX |
| tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h" |
| tmake_file=rs6000/t-aix52 |
| use_collect2=yes |
| thread_file='aix' |
| extra_headers= |
| ;; |
| rs6000-ibm-aix*) |
| xm_defines=POSIX |
| tm_file="${tm_file} rs6000/aix.h rs6000/xcoff.h" |
| use_collect2=yes |
| ;; |
| rs6000-bull-bosx) |
| xm_defines=POSIX |
| tm_file="${tm_file} rs6000/aix.h rs6000/xcoff.h" |
| use_collect2=yes |
| ;; |
| rs6000-*-mach*) |
| tm_file="${tm_file} rs6000/mach.h" |
| xm_defines=POSIX |
| use_collect2=yes |
| ;; |
| rs6000-*-lynxos*) |
| tm_file="lynx.h rs6000/lynx.h" |
| tmake_file=rs6000/t-rs6000 |
| use_collect2=yes |
| ;; |
| s390-*-linux*) |
| tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h" |
| tmake_file="t-slibgcc-elf-ver t-linux s390/t-crtstuff" |
| ;; |
| s390x-*-linux*) |
| tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h" |
| tm_p_file=s390/s390-protos.h |
| md_file=s390/s390.md |
| extra_modes=s390/s390-modes.def |
| out_file=s390/s390.c |
| tmake_file="t-slibgcc-elf-ver t-linux s390/t-crtstuff s390/t-linux64" |
| ;; |
| sh-*-elf* | sh[2346l]*-*-elf*) |
| tmake_file="sh/t-sh sh/t-elf" |
| case $machine in |
| shl* | sh64l*) |
| tm_file="sh/little.h ${tm_file}" |
| tmake_file="${tmake_file} sh/t-le" |
| ;; |
| esac |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h" |
| case $machine in |
| sh64*) |
| tmake_file="${tmake_file} sh/t-sh64" |
| tm_file="${tm_file} sh/sh64.h" |
| extra_headers="shmedia.h ushmedia.h sshmedia.h" |
| ;; |
| sh4_single*) target_cpu_default="SELECT_SH4_SINGLE" ;; |
| sh4*) target_cpu_default="SELECT_SH4" ;; |
| sh3e*) target_cpu_default="SELECT_SH3E" ;; |
| sh3*) target_cpu_default="SELECT_SH3" ;; |
| sh2*) target_cpu_default="SELECT_SH2" ;; |
| esac |
| case $machine in |
| sh[234]*) tmake_file="${tmake_file} sh/t-monolib" ;; |
| esac |
| ;; |
| sh-*-rtemself*) |
| xm_defines=POSIX |
| tmake_file="sh/t-sh sh/t-elf t-rtems" |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/rtemself.h rtems.h" |
| if test x$enable_threads = xyes; then |
| thread_file='rtems' |
| fi |
| ;; |
| sh-*-rtems*) |
| xm_defines=POSIX |
| tmake_file="sh/t-sh t-rtems" |
| tm_file="${tm_file} sh/coff.h sh/rtems.h rtems.h" |
| if test x$enable_threads = xyes; then |
| thread_file='rtems' |
| fi |
| ;; |
| sh-*-linux* | sh[2346lbe]*-*-linux*) |
| tmake_file="sh/t-sh sh/t-elf t-slibgcc-elf-ver t-linux" |
| case $machine in |
| sh*be-*-* | sh*eb-*-*) ;; |
| *) |
| tm_file="sh/little.h ${tm_file}" |
| tmake_file="${tmake_file} sh/t-le" |
| ;; |
| esac |
| tmake_file="${tmake_file} sh/t-linux" |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/linux.h" |
| gas=yes gnu_ld=yes |
| case $machine in |
| sh64*) |
| tmake_file="${tmake_file} sh/t-sh64" |
| tm_file="${tm_file} sh/sh64.h" |
| extra_headers="shmedia.h ushmedia.h sshmedia.h" |
| ;; |
| sh4_single*) target_cpu_default="SELECT_SH4_SINGLE" ;; |
| sh4*) target_cpu_default="SELECT_SH4" ;; |
| sh3e[lb]e*) target_cpu_default="SELECT_SH3E" ;; |
| sh3e[lb]*) target_cpu_default="SELECT_SH3" ;; |
| sh3e*) target_cpu_default="SELECT_SH3E" ;; |
| sh3*) target_cpu_default="SELECT_SH3" ;; |
| sh2*) target_cpu_default="SELECT_SH2" ;; |
| esac |
| case $machine in |
| sh[234]*) tmake_file="${tmake_file} sh/t-monolib" ;; |
| esac |
| ;; |
| sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \ |
| sh64-*-netbsd* | sh64l*-*-netbsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h netbsd.h netbsd-elf.h sh/netbsd-elf.h" |
| tmake_file="${tmake_file} sh/t-sh sh/t-elf" |
| case $machine in |
| sh*l*-*) |
| tm_file="sh/little.h ${tm_file}" |
| tmake_file="${tmake_file} sh/t-le" |
| ;; |
| *) |
| tmake_file="${tmake_file} sh/t-be" |
| ;; |
| esac |
| case $machine in |
| sh5*-*) |
| # SHmedia, 32-bit ABI |
| target_cpu_default="SH5_BIT|SH4_BIT|SH3E_BIT" |
| tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5" |
| ;; |
| sh64*-*) |
| # SHmedia, 64-bit ABI |
| target_cpu_default="SH5_BIT|SH4_BIT" |
| tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5 sh/t-netbsd-sh5-64" |
| ;; |
| *) |
| # SH3, software floating point |
| target_cpu_default="SH1_BIT|SH2_BIT|SH3_BIT" |
| tmake_file="${tmake_file} sh/t-netbsd" |
| ;; |
| esac |
| ;; |
| sh-*-*) |
| tm_file="${tm_file} sh/coff.h" |
| ;; |
| sparc-tti-*) |
| tm_file="${tm_file} sparc/pbd.h" |
| xm_defines=POSIX |
| ;; |
| sparc64-wrs-vxworks*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/biarch64.h gofast.h sparc/vxsparc64.h" |
| tmake_file="sparc/t-vxsparc64 sparc/t-crtfm" |
| use_collect2=yes |
| ;; |
| sparc-wrs-vxworks* | sparclite-wrs-vxworks*) |
| tm_file="${tm_file} aoutos.h sparc/aout.h gofast.h sparc/vxsparc.h" |
| tmake_file=sparc/t-vxsparc |
| use_collect2=yes |
| thread_file='vxworks' |
| ;; |
| sparc-*-aout*) |
| tmake_file=sparc/t-sparcbare |
| tm_file="sparc/sparc.h aoutos.h sparc/aout.h libgloss.h" |
| ;; |
| sparc-*-netbsdelf*) |
| tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h" |
| ;; |
| sparc-*-netbsd*) |
| tm_file="${tm_file} sparc/aout.h netbsd.h netbsd-aout.h sparc/netbsd.h" |
| tmake_file=t-netbsd |
| extra_parts="" |
| use_collect2=yes |
| ;; |
| sparc-*-openbsd*) |
| tm_file="sparc/sparc.h ${tm_file}" |
| # needed to unconfuse gdb |
| tmake_file="t-libc-ok t-openbsd sparc/t-openbsd" |
| # we need collect2 until our bug is fixed... |
| use_collect2=yes |
| ;; |
| sparc64-*-openbsd*) |
| tm_file="sparc/openbsd1-64.h sparc/sparc.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h" |
| xm_file=sparc/xm-sp64.h |
| gas=yes gnu_ld=yes |
| with_cpu=ultrasparc |
| ;; |
| sparc-*-bsd*) |
| tm_file="${tm_file} sparc/bsd.h" |
| ;; |
| sparc-*-chorusos*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h chorus.h" |
| tmake_file="sparc/t-chorus-elf sparc/t-crtfm" |
| extra_parts="crti.o crtn.o crtbegin.o crtend.o" |
| case x${enable_threads} in |
| xyes | xpthreads | xposix) |
| thread_file='posix' |
| ;; |
| esac |
| ;; |
| sparc-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h" |
| tmake_file="sparc/t-elf sparc/t-crtfm" |
| extra_parts="crti.o crtn.o crtbegin.o crtend.o" |
| ;; |
| sparc-*-linux*aout*) # SPARC's running GNU/Linux, a.out |
| tm_file="aoutos.h sparc/sparc.h sparc/aout.h sparc/linux-aout.h" |
| gnu_ld=yes |
| ;; |
| sparc-*-linux*libc1*) # SPARC's running GNU/Linux, libc5 |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h" |
| tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 sparc/t-crtfm" |
| extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o" |
| gnu_ld=yes |
| ;; |
| sparc-*-linux*) # SPARC's running GNU/Linux, libc6 |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h" |
| tmake_file="t-slibgcc-elf-ver t-linux sparc/t-crtfm" |
| ;; |
| sparc-*-lynxos*) |
| if test x$gas = xyes |
| then |
| tm_file="${tm_file} lynx.h sparc/aout.h sparc/lynx.h" |
| else |
| tm_file="${tm_file} lynx-ng.h sparc/aout.h sparc/lynx-ng.h" |
| fi |
| tmake_file=sparc/t-sunos41 |
| ;; |
| sparc-*-rtemsaout*) # would otherwise be caught by sparc-*-rtems* |
| echo "*** Configuration $machine not supported" 1>&2 |
| exit 1 |
| ;; |
| sparc-*-rtems*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/rtemself.h rtems.h" |
| tmake_file="sparc/t-elf sparc/t-crtfm t-rtems" |
| extra_parts="crti.o crtn.o crtbegin.o crtend.o" |
| if test x$enable_threads = xyes; then |
| thread_file='rtems' |
| fi |
| ;; |
| sparc64-*-solaris2* | sparcv9-*-solaris2*) |
| tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h" |
| if test x$gnu_ld = xyes; then |
| tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h" |
| fi |
| if test x$gas = xyes; then |
| tm_file="${tm_file} sparc/sol2-gas-bi.h" |
| fi |
| xm_defines=POSIX |
| tmake_file="sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm" |
| if test x$gnu_ld = xyes; then |
| tmake_file="$tmake_file t-slibgcc-elf-ver" |
| else |
| tmake_file="$tmake_file t-slibgcc-sld" |
| fi |
| extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o" |
| if test x${enable_threads} = x ; then |
| enable_threads=$have_pthread_h |
| if test x${enable_threads} = x ; then |
| enable_threads=$have_thread_h |
| fi |
| fi |
| if test x${enable_threads} = xyes ; then |
| if test x${have_pthread_h} = xyes ; then |
| thread_file='posix' |
| else |
| thread_file='solaris' |
| fi |
| fi |
| ;; |
| sparc-hal-solaris2*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/hal.h" |
| tmake_file="sparc/t-halos sparc/t-sol2 sparc/t-crtfm" |
| if test x$gnu_ld = xyes; then |
| tm_file="${tm_file} sparc/sol2-gld.h" |
| tmake_file="$tmake_file t-slibgcc-elf-ver" |
| else |
| tmake_file="$tmake_file t-slibgcc-sld" |
| fi |
| extra_parts="crt1.o crti.o crtn.o gmon.o crtbegin.o crtend.o" |
| thread_file='solaris' |
| ;; |
| sparc-*-solaris2*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h" |
| if test x$gnu_ld = xyes; then |
| tm_file="${tm_file} sparc/sol2-gld.h" |
| fi |
| tmake_file="sparc/t-sol2 sparc/t-crtfm" |
| if test x$gnu_ld = xyes; then |
| tmake_file="$tmake_file t-slibgcc-elf-ver" |
| else |
| tmake_file="$tmake_file t-slibgcc-sld" |
| fi |
| case $machine in |
| *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*) |
| if test x$gnu_ld = xno; then |
| tm_file="${tm_file} sparc/sol26-sld.h" |
| fi |
| ;; |
| *-*-solaris2.[789] | *-*-solaris2.1[0-9]) |
| tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h" |
| if test x$gnu_ld = xyes; then |
| tm_file="${tm_file} sparc/sol2-gld-bi.h" |
| fi |
| if test x$gas = xyes; then |
| tm_file="${tm_file} sparc/sol2-gas-bi.h" |
| fi |
| tmake_file="$tmake_file sparc/t-sol2-64" |
| ;; |
| esac |
| xm_defines=POSIX |
| extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o" |
| if test x${enable_threads} = x; then |
| enable_threads=$have_pthread_h |
| if test x${enable_threads} = x; then |
| enable_threads=$have_thread_h |
| fi |
| fi |
| if test x${enable_threads} = xyes; then |
| if test x${have_pthread_h} = xyes; then |
| thread_file='posix' |
| else |
| thread_file='solaris' |
| fi |
| fi |
| ;; |
| sparc-*-sunos4.0*) |
| tm_file="${tm_file} sparc/aout.h sparc/sunos4.h" |
| use_collect2=yes |
| ;; |
| sparc-*-sunos4*) |
| tm_file="${tm_file} sparc/aout.h sparc/sunos4.h" |
| tmake_file=sparc/t-sunos41 |
| use_collect2=yes |
| if test x$gas = xyes; then |
| tm_file="${tm_file} sparc/sun4gas.h" |
| fi |
| ;; |
| sparc-*-sunos3*) |
| tm_file="${tm_file} sparc/aout.h sparc/sun4o3.h" |
| use_collect2=yes |
| ;; |
| sparc-*-sysv4*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h" |
| xm_defines=POSIX |
| tmake_file=t-svr4 |
| extra_parts="crtbegin.o crtend.o" |
| ;; |
| sparc-*-vxsim*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/vxsim.h" |
| tmake_file=sparc/t-vxsparc |
| ;; |
| sparclet-*-aout*) |
| tm_file="${tm_file} aoutos.h sparc/aout.h sparc/splet.h libgloss.h" |
| tmake_file=sparc/t-splet |
| ;; |
| sparclite-*-coff*) |
| tm_file="${tm_file} gofast.h sparc/lite.h svr3.h sparc/litecoff.h dbxcoff.h libgloss.h" |
| tmake_file=sparc/t-sparclite |
| ;; |
| sparclite-*-aout*) |
| tm_file="${tm_file} gofast.h sparc/aout.h sparc/lite.h aoutos.h libgloss.h" |
| tmake_file=sparc/t-sparclite |
| ;; |
| sparclite-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h gofast.h sparc/liteelf.h" |
| tmake_file="sparc/t-sparclite sparc/t-crtfm" |
| extra_parts="crtbegin.o crtend.o" |
| ;; |
| sparc86x-*-aout*) |
| tm_file="${tm_file} gofast.h sparc/aout.h sparc/sp86x-aout.h aoutos.h libgloss.h" |
| tmake_file=sparc/t-sp86x |
| ;; |
| sparc86x-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h gofast.h sparc/sp86x-elf.h" |
| tmake_file="sparc/t-sp86x sparc/t-crtfm" |
| extra_parts="crtbegin.o crtend.o" |
| ;; |
| sparc64-*-aout*) |
| tm_file="sparc/sparc.h aoutos.h sparc/aout.h sparc/sp64-aout.h" |
| ;; |
| sparc64-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sp64-elf.h" |
| tmake_file="${tmake_file} sparc/t-crtfm" |
| extra_parts="crtbegin.o crtend.o" |
| ;; |
| sparc64-*-freebsd*|ultrasparc-*-freebsd*) |
| tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h" |
| tmake_file="${tmake_file} sparc/t-crtfm" |
| xmake_file=none |
| case "x$with_cpu" in |
| xultrasparc) ;; |
| x) with_cpu=ultrasparc ;; |
| *) echo "$with_cpu not supported for freebsd target"; exit 1 ;; |
| esac |
| ;; |
| sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux |
| tmake_file="t-slibgcc-elf-ver t-linux sparc/t-linux64 sparc/t-crtfm" |
| tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h" |
| ;; |
| sparc64-*-netbsd*) |
| tmake_file="${tmake_file} sparc/t-netbsd64" |
| tm_file="sparc/biarch64.h ${tm_file}" |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h" |
| ;; |
| strongarm-*-elf*) |
| tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h" |
| tmake_file=arm/t-strongarm-elf |
| out_file=arm/arm.c |
| md_file=arm/arm.md |
| extra_modes=arm/arm-modes.def |
| ;; |
| strongarm-*-coff*) |
| tm_file="arm/semi.h arm/aout.h arm/coff.h arm/strongarm-coff.h arm/arm.h" |
| tmake_file=arm/t-strongarm-coff |
| out_file=arm/arm.c |
| md_file=arm/arm.md |
| extra_modes=arm/arm-modes.def |
| ;; |
| strongarm-*-pe) |
| tm_file="arm/semi.h arm/aout.h arm/coff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h" |
| tmake_file=arm/t-strongarm-pe |
| out_file=arm/arm.c |
| md_file=arm/arm.md |
| extra_modes=arm/arm-modes.def |
| extra_objs=pe.o |
| ;; |
| thumb*-*-*) |
| { echo "config.gcc: error: |
| *** The Thumb targets have been deprecated. The equivalent |
| *** ARM based toolchain can now generate Thumb instructions |
| *** when the -mthumb switch is given to the compiler." 1>&2; exit 1; } |
| ;; |
| v850-*-rtems*) |
| xm_defines=POSIX |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file} v850/v850.h v850/rtems.h rtems.h" |
| tmake_file="v850/t-v850 t-rtems" |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| use_collect2=no |
| c_target_objs="v850-c.o" |
| cxx_target_objs="v850-c.o" |
| ;; |
| v850e-*-*) |
| target_cpu_default="TARGET_CPU_v850e" |
| tm_file="dbxelf.h elfos.h svr4.h v850/v850.h" |
| tm_p_file=v850/v850-protos.h |
| tmake_file=v850/t-v850 |
| md_file=v850/v850.md |
| out_file=v850/v850.c |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| use_collect2=no |
| c_target_objs="v850-c.o" |
| cxx_target_objs="v850-c.o" |
| ;; |
| v850-*-*) |
| target_cpu_default="TARGET_CPU_generic" |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| tmake_file=v850/t-v850 |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| use_collect2=no |
| c_target_objs="v850-c.o" |
| cxx_target_objs="v850-c.o" |
| ;; |
| vax-*-bsd*) # VAXen running BSD |
| tm_file="${tm_file} vax/bsd.h" |
| use_collect2=yes |
| ;; |
| vax-*-sysv*) # VAXen running system V |
| tm_file="${tm_file} vax/vaxv.h" |
| xm_defines=POSIX |
| ;; |
| vax-*-netbsdelf*) |
| tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h" |
| float_format=vax |
| ;; |
| vax-*-netbsd*) |
| tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h" |
| tmake_file=t-netbsd |
| extra_parts="" |
| use_collect2=yes |
| ;; |
| vax-*-openbsd*) |
| tm_file="vax/vax.h vax/openbsd1.h openbsd.h ${tm_file}" |
| use_collect2=yes |
| ;; |
| vax-*-ultrix*) # VAXen running ultrix |
| tm_file="${tm_file} vax/ultrix.h" |
| ;; |
| vax-*-vms*) # VAXen running VMS |
| xm_file=vax/xm-vms.h |
| tm_file=vax/vms.h |
| ;; |
| vax-*-*) # VAX default entry |
| ;; |
| xscale-*-elf) |
| tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h" |
| tmake_file=arm/t-xscale-elf |
| out_file=arm/arm.c |
| md_file=arm/arm.md |
| extra_modes=arm/arm-modes.def |
| ;; |
| xscale-*-coff) |
| tm_file="arm/semi.h arm/aout.h arm/coff.h arm/xscale-coff.h arm/arm.h" |
| tmake_file=arm/t-xscale-coff |
| out_file=arm/arm.c |
| md_file=arm/arm.md |
| extra_modes=arm/arm-modes.def |
| ;; |
| xstormy16-*-elf) |
| # For historical reasons, the target files omit the 'x'. |
| tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h" |
| tm_p_file=stormy16/stormy16-protos.h |
| md_file=stormy16/stormy16.md |
| out_file=stormy16/stormy16.c |
| tmake_file="stormy16/t-stormy16" |
| extra_parts="crtbegin.o crtend.o" |
| ;; |
| xtensa-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h" |
| with_newlib=yes |
| tmake_file=xtensa/t-xtensa |
| extra_parts="crtbegin.o crtend.o" |
| fixincludes=Makefile.in # newlib headers should be OK |
| ;; |
| xtensa-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h" |
| tmake_file="t-slibgcc-elf-ver t-linux xtensa/t-xtensa" |
| ;; |
| *) |
| echo "*** Configuration $machine not supported" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case $machine in |
| *-*-sysv*) |
| install_headers_dir=install-headers-cpio |
| ;; |
| esac |
| |
| # Distinguish i[34567]86 |
| # Also, do not run mips-tfile on MIPS if using gas. |
| # Process --with-cpu= for PowerPC/rs6000 |
| target_cpu_default2= |
| case $machine in |
| i486-*-*) |
| target_cpu_default2=TARGET_CPU_DEFAULT_i486 |
| ;; |
| i586-*-*) |
| case $target_alias in |
| k6_2-*) |
| target_cpu_default2=TARGET_CPU_DEFAULT_k6_2 |
| ;; |
| k6_3-*) |
| target_cpu_default2=TARGET_CPU_DEFAULT_k6_3 |
| ;; |
| k6-*) |
| target_cpu_default2=TARGET_CPU_DEFAULT_k6 |
| ;; |
| pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*) |
| target_cpu_default2=TARGET_CPU_DEFAULT_pentium_mmx |
| ;; |
| *) |
| target_cpu_default2=TARGET_CPU_DEFAULT_pentium |
| ;; |
| esac |
| ;; |
| i686-*-* | i786-*-*) |
| case $target_alias in |
| athlon_xp-*|athlon_mp-*|athlon_4-*) |
| target_cpu_default2=TARGET_CPU_DEFAULT_athlon_sse |
| ;; |
| athlon_tbird-*|athlon-*) |
| target_cpu_default2=TARGET_CPU_DEFAULT_athlon |
| ;; |
| pentium2-*) |
| target_cpu_default2=TARGET_CPU_DEFAULT_pentium2 |
| ;; |
| pentium3-*) |
| target_cpu_default2=TARGET_CPU_DEFAULT_pentium3 |
| ;; |
| pentium4-*) |
| target_cpu_default2=TARGET_CPU_DEFAULT_pentium4 |
| ;; |
| *) |
| target_cpu_default2=TARGET_CPU_DEFAULT_pentiumpro |
| ;; |
| esac |
| ;; |
| x86_64-*-*) |
| # We should have hammer chip here, but it does not exist yet and |
| # thus it is not supported. Athlon_SSE is probably equivalent feature |
| # wise to hammer from our point of view except for 64bit mode. |
| case "x$with_cpu" in |
| x) |
| target_cpu_default2=TARGET_CPU_DEFAULT_athlon_sse |
| ;; |
| xnocona) |
| target_cpu_default2=TARGET_CPU_DEFAULT_pentium4 |
| ;; |
| xyes|xno) |
| echo "--with-cpu must be passed a value" 1>&2 |
| exit 1 |
| ;; |
| *) |
| if test x$pass2done = xyes |
| then |
| echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2 |
| exit 1 |
| fi |
| ;; |
| esac |
| ;; |
| alpha*-*-*) |
| case $machine in |
| alphaev6[78]*) |
| target_cpu_default2="MASK_CPU_EV6|MASK_BWX|MASK_MAX|MASK_FIX|MASK_CIX" |
| ;; |
| alphaev6*) |
| target_cpu_default2="MASK_CPU_EV6|MASK_BWX|MASK_MAX|MASK_FIX" |
| ;; |
| alphapca56*) |
| target_cpu_default2="MASK_CPU_EV5|MASK_BWX|MASK_MAX" |
| ;; |
| alphaev56*) |
| target_cpu_default2="MASK_CPU_EV5|MASK_BWX" |
| ;; |
| alphaev5*) |
| target_cpu_default2="MASK_CPU_EV5" |
| ;; |
| esac |
| |
| if test x$gas = xyes |
| then |
| if test "$target_cpu_default2" = "" |
| then |
| target_cpu_default2="MASK_GAS" |
| else |
| target_cpu_default2="${target_cpu_default2}|MASK_GAS" |
| fi |
| fi |
| ;; |
| arm*-*-*) |
| case "x$with_cpu" in |
| x) |
| # The most generic |
| target_cpu_default2="TARGET_CPU_generic" |
| ;; |
| |
| # Distinguish cores, and major variants |
| # arm7m doesn't exist, but D & I don't affect code |
| xarm[236789] | xarm250 | xarm[67][01]0 \ |
| | xarm7m | xarm7dm | xarm7dmi | xarm[79]tdmi \ |
| | xarm7100 | xarm7500 | xarm7500fe | xarm810 \ |
| | xxscale \ |
| | xstrongarm | xstrongarm110 | xstrongarm1100) |
| target_cpu_default2="TARGET_CPU_$with_cpu" |
| ;; |
| |
| xyes | xno) |
| echo "--with-cpu must be passed a value" 1>&2 |
| exit 1 |
| ;; |
| |
| *) |
| if test x$pass2done = xyes |
| then |
| echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2 |
| exit 1 |
| fi |
| ;; |
| esac |
| ;; |
| |
| hppa*-*-* | parisc*-*-*) |
| if test x$gas = xyes |
| then |
| target_cpu_default2="MASK_GAS|MASK_JUMP_IN_DELAY" |
| fi |
| case $machine in |
| hppa1* | parisc1*) |
| tm_defines="TARGET_SCHED_DEFAULT=\\\"7100LC\\\"" |
| ;; |
| esac |
| ;; |
| mips*-*-*) |
| case $machine in |
| mips*-*-ecoff* | mips*-*-elf*) |
| if test x$gas = xyes |
| then |
| if test x$gnu_ld = xyes |
| then |
| target_cpu_default2="MASK_GAS|MASK_SPLIT_ADDR" |
| else |
| target_cpu_default2="MASK_GAS" |
| fi |
| fi |
| ;; |
| mips*-*-*) |
| if test x$gas = xyes |
| then |
| target_cpu_default2="MASK_GAS" |
| fi |
| ;; |
| esac |
| case $machine in |
| mips*el-*-*) |
| tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines" |
| ;; |
| esac |
| case $tm_file in |
| *mips/elf.h* | *mips/elf64.h*) |
| tm_defines="OBJECT_FORMAT_ELF $tm_defines" |
| ;; |
| esac |
| if test "x$enable_gofast" = xyes |
| then |
| tm_defines="INIT_SUBTARGET_OPTABS=INIT_GOFAST_OPTABS $tm_defines" |
| tm_file="gofast.h $tm_file" |
| tmake_file="mips/t-gofast $tmake_file" |
| else |
| tmake_file="mips/t-mips $tmake_file" |
| fi |
| ;; |
| powerpc*-*-* | rs6000-*-*) |
| if test x$enable_altivec = xyes |
| then |
| tm_file="$tm_file rs6000/altivec-defs.h" |
| fi |
| case "x$with_cpu" in |
| x) |
| ;; |
| |
| xcommon | xpower | xpower2 | xpower3 | xpowerpc | xpowerpc64 \ |
| | xrios | xrios1 | xrios2 | xrsc | xrsc1 | xrs64a \ |
| | x601 | x602 | x603 | x603e | x604 | x604e | x620 | x630 \ |
| | x740 | x750 | x7400 | x7450 | x505) |
| target_cpu_default2="\\\"$with_cpu\\\"" |
| ;; |
| |
| x401 | x403 | x405 | xec603e | x801 | x821 | x823 | x860) |
| target_cpu_default2="\\\"$with_cpu\\\"" |
| ;; |
| |
| xyes | xno) |
| echo "--with-cpu must be passed a value" 1>&2 |
| exit 1 |
| ;; |
| |
| *) |
| if test x$pass2done = xyes |
| then |
| echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2 |
| exit 1 |
| fi |
| ;; |
| esac |
| c_target_objs="${c_target_objs} rs6000-c.o" |
| cxx_target_objs="${cxx_target_objs} rs6000-c.o" |
| tmake_file="${tmake_file} rs6000/t-rs6000-c-rule" |
| ;; |
| sparc*-*-*) |
| case ".$with_cpu" in |
| .) |
| target_cpu_default2=TARGET_CPU_"`echo $machine | sed 's/-.*$//'`" |
| ;; |
| .supersparc | .hypersparc | .ultrasparc | .v7 | .v8 | .v9) |
| target_cpu_default2="TARGET_CPU_$with_cpu" |
| ;; |
| *) |
| if test x$pass2done = xyes |
| then |
| echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2 |
| exit 1 |
| fi |
| ;; |
| esac |
| ;; |
| v850*-*-*) |
| case "x$with_cpu" in |
| x) |
| ;; |
| xv850e) |
| target_cpu_default2="TARGET_CPU_$with_cpu" |
| ;; |
| *) |
| if test x$pass2done = xyes |
| then |
| echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2 |
| exit 1 |
| fi |
| ;; |
| esac |
| ;; |
| esac |
| |
| if test "$target_cpu_default2" != "" |
| then |
| if test "$target_cpu_default" != "" |
| then |
| target_cpu_default="(${target_cpu_default}|${target_cpu_default2})" |
| else |
| target_cpu_default=$target_cpu_default2 |
| fi |
| fi |
| |
| # Save data on machine being used to compile GCC in build_xm_file. |
| # Save data on host machine in vars host_xm_file and host_xmake_file. |
| if test x$pass1done = x |
| then |
| if test x$xm_file != x |
| then build_xm_file=$xm_file |
| fi |
| build_xm_defines=$xm_defines |
| build_install_headers_dir=$install_headers_dir |
| build_exeext=$exeext |
| pass1done=yes |
| else |
| if test x$pass2done = x |
| then |
| if test x$xm_file != x |
| then host_xm_file=$xm_file |
| fi |
| host_xm_defines=$xm_defines |
| host_xmake_file="$xmake_file" |
| host_truncate_target=$truncate_target |
| host_extra_gcc_objs=$extra_gcc_objs |
| host_extra_objs=$extra_host_objs |
| host_exeext=$exeext |
| pass2done=yes |
| fi |
| fi |