blob: c4cf2da8c886f207c36ca746cb56f5c28ff4f595 [file] [log] [blame]
------------------------------------------------------------------------------
-- --
-- GNAT COMPILER COMPONENTS --
-- --
-- P R J . P A R T --
-- --
-- B o d y --
-- --
-- Copyright (C) 2001-2014, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
-- ware Foundation; either version 3, or (at your option) any later ver- --
-- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
-- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
-- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
-- for more details. You should have received a copy of the GNU General --
-- Public License distributed with GNAT; see file COPYING3. If not, go to --
-- http://www.gnu.org/licenses for a complete copy of the license. --
-- --
-- GNAT was originally developed by the GNAT team at New York University. --
-- Extensive contributions were provided by Ada Core Technologies Inc. --
-- --
------------------------------------------------------------------------------
with Atree; use Atree;
with Err_Vars; use Err_Vars;
with Opt; use Opt;
with Osint; use Osint;
with Output; use Output;
with Prj.Com; use Prj.Com;
with Prj.Dect;
with Prj.Env; use Prj.Env;
with Prj.Err; use Prj.Err;
with Sinput; use Sinput;
with Sinput.P; use Sinput.P;
with Snames;
with Table;
with Ada.Characters.Handling; use Ada.Characters.Handling;
with Ada.Exceptions; use Ada.Exceptions;
with GNAT.HTable; use GNAT.HTable;
package body Prj.Part is
Buffer : String_Access;
Buffer_Last : Natural := 0;
Dir_Sep : Character renames GNAT.OS_Lib.Directory_Separator;
------------------------------------
-- Local Packages and Subprograms --
------------------------------------
type With_Id is new Nat;
No_With : constant With_Id := 0;
type With_Record is record
Path : Path_Name_Type;
Location : Source_Ptr;
Limited_With : Boolean;
Node : Project_Node_Id;
Next : With_Id;
end record;
-- Information about an imported project, to be put in table Withs below
package Withs is new Table.Table
(Table_Component_Type => With_Record,
Table_Index_Type => With_Id,
Table_Low_Bound => 1,
Table_Initial => 10,
Table_Increment => 100,
Table_Name => "Prj.Part.Withs");
-- Table used to store temporarily paths and locations of imported
-- projects. These imported projects will be effectively parsed later: just
-- before parsing the current project for the non limited withed projects,
-- after getting its name; after complete parsing of the current project
-- for the limited withed projects.
type Names_And_Id is record
Path_Name : Path_Name_Type;
Canonical_Path_Name : Path_Name_Type;
Id : Project_Node_Id;
Limited_With : Boolean;
end record;
package Project_Stack is new Table.Table
(Table_Component_Type => Names_And_Id,
Table_Index_Type => Nat,
Table_Low_Bound => 1,
Table_Initial => 10,
Table_Increment => 100,
Table_Name => "Prj.Part.Project_Stack");
-- This table is used to detect circular dependencies
-- for imported and extended projects and to get the project ids of
-- limited imported projects when there is a circularity with at least
-- one limited imported project file.
package Virtual_Hash is new GNAT.HTable.Simple_HTable
(Header_Num => Header_Num,
Element => Project_Node_Id,
No_Element => Project_Node_High_Bound,
Key => Project_Node_Id,
Hash => Prj.Tree.Hash,
Equal => "=");
-- Hash table to store the node ids of projects for which a virtual
-- extending project need to be created. The corresponding value is the
-- head of a list of WITH clauses corresponding to the context of the
-- enclosing EXTEND ALL projects. Note: Default_Element is Project_Node_
-- High_Bound because we want Empty_Node to be a possible value.
package Processed_Hash is new GNAT.HTable.Simple_HTable
(Header_Num => Header_Num,
Element => Boolean,
No_Element => False,
Key => Project_Node_Id,
Hash => Prj.Tree.Hash,
Equal => "=");
-- Hash table to store the project process when looking for project that
-- need to have a virtual extending project, to avoid processing the same
-- project twice.
function Has_Circular_Dependencies
(Flags : Processing_Flags;
Normed_Path_Name : Path_Name_Type;
Canonical_Path_Name : Path_Name_Type) return Boolean;
-- Check for a circular dependency in the loaded project.
-- Generates an error message in such a case.
procedure Read_Project_Qualifier
(Flags : Processing_Flags;
In_Tree : Project_Node_Tree_Ref;
Is_Config_File : Boolean;
Qualifier_Location : out Source_Ptr;
Project : Project_Node_Id);
-- Check if there is a qualifier before the reserved word "project"
-- Hash table to cache project path to avoid looking for them on the path
procedure Check_Extending_All_Imports
(Flags : Processing_Flags;
In_Tree : Project_Node_Tree_Ref;
Project : Project_Node_Id);
-- Check that a non extending-all project does not import an
-- extending-all project.
procedure Check_Aggregate_Imports
(Flags : Processing_Flags;
In_Tree : Project_Node_Tree_Ref;
Project : Project_Node_Id);
-- Check that an aggregate project only imports abstract projects
procedure Check_Import_Aggregate
(Flags : Processing_Flags;
In_Tree : Project_Node_Tree_Ref;
Project : Project_Node_Id);
-- Check that a non aggregate project does not import an aggregate project
procedure Create_Virtual_Extending_Project
(For_Project : Project_Node_Id;
Main_Project : Project_Node_Id;
Extension_Withs : Project_Node_Id;
In_Tree : Project_Node_Tree_Ref);
-- Create a virtual extending project of For_Project. Main_Project is
-- the extending all project. Extension_Withs is the head of a WITH clause
-- list to be added to the created virtual project.
--
-- The String_Value_Of is not set for the automatically added with
-- clause and keeps the default value of No_Name. This enables Prj.PP
-- to skip these automatically added with clauses to be processed.
procedure Look_For_Virtual_Projects_For
(Proj : Project_Node_Id;
In_Tree : Project_Node_Tree_Ref;
Potentially_Virtual : Boolean);
-- Look for projects that need to have a virtual extending project.
-- This procedure is recursive. If called with Potentially_Virtual set to
-- True, then Proj may need an virtual extending project; otherwise it
-- does not (because it is already extended), but other projects that it
-- imports may need to be virtually extended.
type Extension_Origin is (None, Extending_Simple, Extending_All);
-- Type of parameter From_Extended for procedures Parse_Single_Project and
-- Post_Parse_Context_Clause. Extending_All means that we are parsing the
-- tree rooted at an extending all project.
procedure Parse_Single_Project
(In_Tree : Project_Node_Tree_Ref;
Project : out Project_Node_Id;
Extends_All : out Boolean;
Path_Name_Id : Path_Name_Type;
Extended : Boolean;
From_Extended : Extension_Origin;
In_Limited : Boolean;
Packages_To_Check : String_List_Access;
Depth : Natural;
Current_Dir : String;
Is_Config_File : Boolean;
Env : in out Environment;
Implicit_Project : Boolean := False);
-- Parse a project file. This is a recursive procedure: it calls itself for
-- imported and extended projects. When From_Extended is not None, if the
-- project has already been parsed and is an extended project A, return the
-- ultimate (not extended) project that extends A. When In_Limited is True,
-- the importing path includes at least one "limited with". When parsing
-- configuration projects, do not allow a depth > 1.
--
-- Is_Config_File should be set to True if the project represents a config
-- file (.cgpr) since some specific checks apply.
--
-- If Implicit_Project is True, change the Directory of the project node
-- to be the Current_Dir. Recursive calls to Parse_Single_Project are
-- always done with the default False value for Implicit_Project.
procedure Pre_Parse_Context_Clause
(In_Tree : Project_Node_Tree_Ref;
Context_Clause : out With_Id;
Is_Config_File : Boolean;
Flags : Processing_Flags);
-- Parse the context clause of a project. Store the paths and locations of
-- the imported projects in table Withs. Does nothing if there is no
-- context clause (if the current token is not "with" or "limited" followed
-- by "with").
-- Is_Config_File should be set to True if the project represents a config
-- file (.cgpr) since some specific checks apply.
procedure Post_Parse_Context_Clause
(Context_Clause : With_Id;
In_Tree : Project_Node_Tree_Ref;
In_Limited : Boolean;
Limited_Withs : Boolean;
Imported_Projects : in out Project_Node_Id;
Project_Directory : Path_Name_Type;
From_Extended : Extension_Origin;
Packages_To_Check : String_List_Access;
Depth : Natural;
Current_Dir : String;
Is_Config_File : Boolean;
Env : in out Environment);
-- Parse the imported projects that have been stored in table Withs, if
-- any. From_Extended is used for the call to Parse_Single_Project below.
--
-- When In_Limited is True, the importing path includes at least one
-- "limited with". When Limited_Withs is False, only non limited withed
-- projects are parsed. When Limited_Withs is True, only limited withed
-- projects are parsed.
--
-- Is_Config_File should be set to True if the project represents a config
-- file (.cgpr) since some specific checks apply.
function Project_Name_From
(Path_Name : String;
Is_Config_File : Boolean) return Name_Id;
-- Returns the name of the project that corresponds to its path name.
-- Returns No_Name if the path name is invalid, because the corresponding
-- project name does not have the syntax of an ada identifier.
function Copy_With_Clause
(With_Clause : Project_Node_Id;
In_Tree : Project_Node_Tree_Ref;
Next_Clause : Project_Node_Id) return Project_Node_Id;
-- Return a copy of With_Clause in In_Tree, whose Next_With_Clause is the
-- indicated one.
----------------------
-- Copy_With_Clause --
----------------------
function Copy_With_Clause
(With_Clause : Project_Node_Id;
In_Tree : Project_Node_Tree_Ref;
Next_Clause : Project_Node_Id) return Project_Node_Id
is
New_With_Clause : constant Project_Node_Id :=
Default_Project_Node (In_Tree, N_With_Clause);
begin
Set_Name_Of (New_With_Clause, In_Tree,
Name_Of (With_Clause, In_Tree));
Set_Path_Name_Of (New_With_Clause, In_Tree,
Path_Name_Of (With_Clause, In_Tree));
Set_Project_Node_Of (New_With_Clause, In_Tree,
Project_Node_Of (With_Clause, In_Tree));
Set_Next_With_Clause_Of (New_With_Clause, In_Tree, Next_Clause);
return New_With_Clause;
end Copy_With_Clause;
--------------------------------------
-- Create_Virtual_Extending_Project --
--------------------------------------
procedure Create_Virtual_Extending_Project
(For_Project : Project_Node_Id;
Main_Project : Project_Node_Id;
Extension_Withs : Project_Node_Id;
In_Tree : Project_Node_Tree_Ref)
is
Virtual_Name : constant String :=
Virtual_Prefix &
Get_Name_String (Name_Of (For_Project, In_Tree));
-- The name of the virtual extending project
Virtual_Name_Id : Name_Id;
-- Virtual extending project name id
Virtual_Path_Id : Path_Name_Type;
-- Fake path name of the virtual extending project. The directory is
-- the same directory as the extending all project.
-- The source of the virtual extending project is something like:
-- project V$<project name> extends <project path> is
-- for Source_Dirs use ();
-- end V$<project name>;
-- The project directory cannot be specified during parsing; it will be
-- put directly in the virtual extending project data during processing.
-- Nodes that made up the virtual extending project
Virtual_Project : Project_Node_Id;
With_Clause : constant Project_Node_Id :=
Default_Project_Node
(In_Tree, N_With_Clause);
Project_Declaration : Project_Node_Id;
Source_Dirs_Declaration : constant Project_Node_Id :=
Default_Project_Node
(In_Tree, N_Declarative_Item);
Source_Dirs_Attribute : constant Project_Node_Id :=
Default_Project_Node
(In_Tree, N_Attribute_Declaration, List);
Source_Dirs_Expression : constant Project_Node_Id :=
Default_Project_Node
(In_Tree, N_Expression, List);
Source_Dirs_Term : constant Project_Node_Id :=
Default_Project_Node
(In_Tree, N_Term, List);
Source_Dirs_List : constant Project_Node_Id :=
Default_Project_Node
(In_Tree, N_Literal_String_List, List);
begin
-- Get the virtual path name
Get_Name_String (Path_Name_Of (Main_Project, In_Tree));
while Name_Len > 0
and then not Is_Directory_Separator (Name_Buffer (Name_Len))
loop
Name_Len := Name_Len - 1;
end loop;
Name_Buffer (Name_Len + 1 .. Name_Len + Virtual_Name'Length) :=
Virtual_Name;
Name_Len := Name_Len + Virtual_Name'Length;
Virtual_Path_Id := Name_Find;
-- Get the virtual name id
Name_Len := Virtual_Name'Length;
Name_Buffer (1 .. Name_Len) := Virtual_Name;
Virtual_Name_Id := Name_Find;
Virtual_Project := Create_Project
(In_Tree => In_Tree,
Name => Virtual_Name_Id,
Full_Path => Virtual_Path_Id,
Is_Config_File => False);
Project_Declaration := Project_Declaration_Of (Virtual_Project, In_Tree);
-- Add a WITH clause to the main project to import the newly created
-- virtual extending project.
Set_Name_Of (With_Clause, In_Tree, Virtual_Name_Id);
Set_Path_Name_Of (With_Clause, In_Tree, Virtual_Path_Id);
Set_Project_Node_Of (With_Clause, In_Tree, Virtual_Project);
Set_Next_With_Clause_Of
(With_Clause, In_Tree, First_With_Clause_Of (Main_Project, In_Tree));
Set_First_With_Clause_Of (Main_Project, In_Tree, With_Clause);
-- Copy with clauses for projects imported by the extending-all project
declare
Org_With_Clause : Project_Node_Id := Extension_Withs;
New_With_Clause : Project_Node_Id := Empty_Node;
begin
while Present (Org_With_Clause) loop
New_With_Clause :=
Copy_With_Clause (Org_With_Clause, In_Tree, New_With_Clause);
Org_With_Clause := Next_With_Clause_Of (Org_With_Clause, In_Tree);
end loop;
Set_First_With_Clause_Of (Virtual_Project, In_Tree, New_With_Clause);
end;
-- Virtual project node
Set_Location_Of
(Virtual_Project, In_Tree, Location_Of (Main_Project, In_Tree));
Set_Extended_Project_Path_Of
(Virtual_Project, In_Tree, Path_Name_Of (For_Project, In_Tree));
-- Project declaration
Set_First_Declarative_Item_Of
(Project_Declaration, In_Tree, Source_Dirs_Declaration);
Set_Extended_Project_Of (Project_Declaration, In_Tree, For_Project);
-- Source_Dirs declaration
Set_Current_Item_Node
(Source_Dirs_Declaration, In_Tree, Source_Dirs_Attribute);
-- Source_Dirs attribute
Set_Name_Of (Source_Dirs_Attribute, In_Tree, Snames.Name_Source_Dirs);
Set_Expression_Of
(Source_Dirs_Attribute, In_Tree, Source_Dirs_Expression);
-- Source_Dirs expression
Set_First_Term (Source_Dirs_Expression, In_Tree, Source_Dirs_Term);
-- Source_Dirs term
Set_Current_Term (Source_Dirs_Term, In_Tree, Source_Dirs_List);
-- Source_Dirs empty list: nothing to do
end Create_Virtual_Extending_Project;
-----------------------------------
-- Look_For_Virtual_Projects_For --
-----------------------------------
Extension_Withs : Project_Node_Id;
-- Head of the current EXTENDS ALL imports list. When creating virtual
-- projects for an EXTENDS ALL, we import in each virtual project all
-- of the projects that appear in WITH clauses of the extending projects.
-- This ensures that virtual projects share a consistent environment (in
-- particular if a project imported by one of the extending projects
-- replaces some runtime units).
procedure Look_For_Virtual_Projects_For
(Proj : Project_Node_Id;
In_Tree : Project_Node_Tree_Ref;
Potentially_Virtual : Boolean)
is
Declaration : Project_Node_Id := Empty_Node;
-- Node for the project declaration of Proj
With_Clause : Project_Node_Id := Empty_Node;
-- Node for a with clause of Proj
Imported : Project_Node_Id := Empty_Node;
-- Node for a project imported by Proj
Extended : Project_Node_Id := Empty_Node;
-- Node for the eventual project extended by Proj
Extends_All : Boolean := False;
-- Set True if Proj is an EXTENDS ALL project
Saved_Extension_Withs : constant Project_Node_Id := Extension_Withs;
begin
-- Nothing to do if Proj is undefined or has already been processed
if Present (Proj) and then not Processed_Hash.Get (Proj) then
-- Make sure the project will not be processed again
Processed_Hash.Set (Proj, True);
Declaration := Project_Declaration_Of (Proj, In_Tree);
if Present (Declaration) then
Extended := Extended_Project_Of (Declaration, In_Tree);
Extends_All := Is_Extending_All (Proj, In_Tree);
end if;
-- If this is a project that may need a virtual extending project
-- and it is not itself an extending project, put it in the list.
if Potentially_Virtual and then No (Extended) then
Virtual_Hash.Set (Proj, Extension_Withs);
end if;
-- Now check the projects it imports
With_Clause := First_With_Clause_Of (Proj, In_Tree);
while Present (With_Clause) loop
Imported := Project_Node_Of (With_Clause, In_Tree);
if Present (Imported) then
Look_For_Virtual_Projects_For
(Imported, In_Tree, Potentially_Virtual => True);
end if;
if Extends_All then
-- This is an EXTENDS ALL project: prepend each of its WITH
-- clauses to the currently active list of extension deps.
Extension_Withs :=
Copy_With_Clause (With_Clause, In_Tree, Extension_Withs);
end if;
With_Clause := Next_With_Clause_Of (With_Clause, In_Tree);
end loop;
-- Check also the eventual project extended by Proj. As this project
-- is already extended, call recursively with Potentially_Virtual
-- being False.
Look_For_Virtual_Projects_For
(Extended, In_Tree, Potentially_Virtual => False);
Extension_Withs := Saved_Extension_Withs;
end if;
end Look_For_Virtual_Projects_For;
-----------
-- Parse --
-----------
procedure Parse
(In_Tree : Project_Node_Tree_Ref;
Project : out Project_Node_Id;
Project_File_Name : String;
Errout_Handling : Errout_Mode := Always_Finalize;
Packages_To_Check : String_List_Access;
Store_Comments : Boolean := False;
Current_Directory : String := "";
Is_Config_File : Boolean;
Env : in out Prj.Tree.Environment;
Target_Name : String := "";
Implicit_Project : Boolean := False)
is
Dummy : Boolean;
pragma Warnings (Off, Dummy);
Real_Project_File_Name : String_Access :=
Osint.To_Canonical_File_Spec
(Project_File_Name);
Path_Name_Id : Path_Name_Type;
begin
In_Tree.Incomplete_With := False;
Project_Stack.Init;
Tree_Private_Part.Projects_Htable.Reset (In_Tree.Projects_HT);
if not Is_Initialized (Env.Project_Path) then
Prj.Env.Initialize_Default_Project_Path
(Env.Project_Path, Target_Name);
end if;
if Real_Project_File_Name = null then
Real_Project_File_Name := new String'(Project_File_Name);
end if;
Project := Empty_Node;
Find_Project (Env.Project_Path,
Project_File_Name => Real_Project_File_Name.all,
Directory => Current_Directory,
Path => Path_Name_Id);
Free (Real_Project_File_Name);
if Errout_Handling /= Never_Finalize then
Prj.Err.Initialize;
end if;
Prj.Err.Scanner.Set_Comment_As_Token (Store_Comments);
Prj.Err.Scanner.Set_End_Of_Line_As_Token (Store_Comments);
if Path_Name_Id = No_Path then
declare
P : String_Access;
begin
Get_Path (Env.Project_Path, Path => P);
Prj.Com.Fail
("project file """
& Project_File_Name
& """ not found in "
& P.all);
Project := Empty_Node;
return;
end;
end if;
-- Parse the main project file
begin
Parse_Single_Project
(In_Tree => In_Tree,
Project => Project,
Extends_All => Dummy,
Path_Name_Id => Path_Name_Id,
Extended => False,
From_Extended => None,
In_Limited => False,
Packages_To_Check => Packages_To_Check,
Depth => 0,
Current_Dir => Current_Directory,
Is_Config_File => Is_Config_File,
Env => Env,
Implicit_Project => Implicit_Project);
exception
when Types.Unrecoverable_Error =>
-- Unrecoverable_Error is raised when a line is too long.
-- A meaningful error message will be displayed later.
Project := Empty_Node;
end;
-- If Project is an extending-all project, create the eventual
-- virtual extending projects and check that there are no illegally
-- imported projects.
if Present (Project)
and then Is_Extending_All (Project, In_Tree)
then
-- First look for projects that potentially need a virtual
-- extending project.
Virtual_Hash.Reset;
Processed_Hash.Reset;
-- Mark the extending all project as processed, to avoid checking
-- the imported projects in case of a "limited with" on this
-- extending all project.
Processed_Hash.Set (Project, True);
declare
Declaration : constant Project_Node_Id :=
Project_Declaration_Of (Project, In_Tree);
begin
Extension_Withs := First_With_Clause_Of (Project, In_Tree);
Look_For_Virtual_Projects_For
(Extended_Project_Of (Declaration, In_Tree), In_Tree,
Potentially_Virtual => False);
end;
-- Now, check the projects directly imported by the main project.
-- Remove from the potentially virtual any project extended by one
-- of these imported projects.
declare
With_Clause : Project_Node_Id;
Imported : Project_Node_Id := Empty_Node;
Declaration : Project_Node_Id := Empty_Node;
begin
With_Clause := First_With_Clause_Of (Project, In_Tree);
while Present (With_Clause) loop
Imported := Project_Node_Of (With_Clause, In_Tree);
if Present (Imported) then
Declaration := Project_Declaration_Of (Imported, In_Tree);
if Extended_Project_Of (Declaration, In_Tree) /=
Empty_Node
then
loop
Imported :=
Extended_Project_Of (Declaration, In_Tree);
exit when No (Imported);
Virtual_Hash.Remove (Imported);
Declaration :=
Project_Declaration_Of (Imported, In_Tree);
end loop;
end if;
end if;
With_Clause := Next_With_Clause_Of (With_Clause, In_Tree);
end loop;
end;
-- Now create all the virtual extending projects
declare
Proj : Project_Node_Id := Empty_Node;
Withs : Project_Node_Id;
begin
Virtual_Hash.Get_First (Proj, Withs);
while Withs /= Project_Node_High_Bound loop
Create_Virtual_Extending_Project
(Proj, Project, Withs, In_Tree);
Virtual_Hash.Get_Next (Proj, Withs);
end loop;
end;
end if;
-- If there were any kind of error during the parsing, serious
-- or not, then the parsing fails.
if Total_Errors_Detected > 0 then
Project := Empty_Node;
end if;
case Errout_Handling is
when Always_Finalize =>
Prj.Err.Finalize;
-- Reinitialize to avoid duplicate warnings later on
Prj.Err.Initialize;
when Finalize_If_Error =>
if No (Project) then
Prj.Err.Finalize;
Prj.Err.Initialize;
end if;
when Never_Finalize =>
null;
end case;
exception
when X : others =>
-- Internal error
Write_Line (Exception_Information (X));
Write_Str ("Exception ");
Write_Str (Exception_Name (X));
Write_Line (" raised, while processing project file");
Project := Empty_Node;
end Parse;
------------------------------
-- Pre_Parse_Context_Clause --
------------------------------
procedure Pre_Parse_Context_Clause
(In_Tree : Project_Node_Tree_Ref;
Context_Clause : out With_Id;
Is_Config_File : Boolean;
Flags : Processing_Flags)
is
Current_With_Clause : With_Id := No_With;
Limited_With : Boolean := False;
Current_With : With_Record;
Current_With_Node : Project_Node_Id := Empty_Node;
begin
-- Assume no context clause
Context_Clause := No_With;
With_Loop :
-- If Token is not WITH or LIMITED, there is no context clause, or we
-- have exhausted the with clauses.
while Token = Tok_With or else Token = Tok_Limited loop
Current_With_Node :=
Default_Project_Node (Of_Kind => N_With_Clause, In_Tree => In_Tree);
Limited_With := Token = Tok_Limited;
if Is_Config_File then
Error_Msg
(Flags,
"configuration project cannot import " &
"other configuration projects",
Token_Ptr);
end if;
if Limited_With then
Scan (In_Tree); -- past LIMITED
Expect (Tok_With, "WITH");
exit With_Loop when Token /= Tok_With;
end if;
Comma_Loop :
loop
Scan (In_Tree); -- past WITH or ","
Expect (Tok_String_Literal, "literal string");
if Token /= Tok_String_Literal then
return;
end if;
-- Store path and location in table Withs
Current_With :=
(Path => Path_Name_Type (Token_Name),
Location => Token_Ptr,
Limited_With => Limited_With,
Node => Current_With_Node,
Next => No_With);
Withs.Increment_Last;
Withs.Table (Withs.Last) := Current_With;
if Current_With_Clause = No_With then
Context_Clause := Withs.Last;
else
Withs.Table (Current_With_Clause).Next := Withs.Last;
end if;
Current_With_Clause := Withs.Last;
Scan (In_Tree);
if Token = Tok_Semicolon then
Set_End_Of_Line (Current_With_Node);
Set_Previous_Line_Node (Current_With_Node);
-- End of (possibly multiple) with clause;
Scan (In_Tree); -- past semicolon
exit Comma_Loop;
elsif Token = Tok_Comma then
Set_Is_Not_Last_In_List (Current_With_Node, In_Tree);
else
Error_Msg (Flags, "expected comma or semi colon", Token_Ptr);
exit Comma_Loop;
end if;
Current_With_Node :=
Default_Project_Node
(Of_Kind => N_With_Clause, In_Tree => In_Tree);
end loop Comma_Loop;
end loop With_Loop;
end Pre_Parse_Context_Clause;
-------------------------------
-- Post_Parse_Context_Clause --
-------------------------------
procedure Post_Parse_Context_Clause
(Context_Clause : With_Id;
In_Tree : Project_Node_Tree_Ref;
In_Limited : Boolean;
Limited_Withs : Boolean;
Imported_Projects : in out Project_Node_Id;
Project_Directory : Path_Name_Type;
From_Extended : Extension_Origin;
Packages_To_Check : String_List_Access;
Depth : Natural;
Current_Dir : String;
Is_Config_File : Boolean;
Env : in out Environment)
is
Current_With_Clause : With_Id := Context_Clause;
Current_Project : Project_Node_Id := Imported_Projects;
Previous_Project : Project_Node_Id := Empty_Node;
Next_Project : Project_Node_Id := Empty_Node;
Project_Directory_Path : constant String :=
Get_Name_String (Project_Directory);
Current_With : With_Record;
Extends_All : Boolean := False;
Imported_Path_Name_Id : Path_Name_Type;
begin
-- Set Current_Project to the last project in the current list, if the
-- list is not empty.
if Present (Current_Project) then
while
Present (Next_With_Clause_Of (Current_Project, In_Tree))
loop
Current_Project := Next_With_Clause_Of (Current_Project, In_Tree);
end loop;
end if;
while Current_With_Clause /= No_With loop
Current_With := Withs.Table (Current_With_Clause);
Current_With_Clause := Current_With.Next;
if Limited_Withs = Current_With.Limited_With then
Find_Project
(Env.Project_Path,
Project_File_Name => Get_Name_String (Current_With.Path),
Directory => Project_Directory_Path,
Path => Imported_Path_Name_Id);
if Imported_Path_Name_Id = No_Path then
if Env.Flags.Ignore_Missing_With then
In_Tree.Incomplete_With := True;
Env.Flags.Incomplete_Withs := True;
else
-- The project file cannot be found
Error_Msg_File_1 := File_Name_Type (Current_With.Path);
Error_Msg
(Env.Flags, "unknown project file: {",
Current_With.Location);
-- If this is not imported by the main project file, display
-- the import path.
if Project_Stack.Last > 1 then
for Index in reverse 1 .. Project_Stack.Last loop
Error_Msg_File_1 :=
File_Name_Type
(Project_Stack.Table (Index).Path_Name);
Error_Msg
(Env.Flags, "\imported by {", Current_With.Location);
end loop;
end if;
end if;
else
-- New with clause
declare
Resolved_Path : constant String :=
Normalize_Pathname
(Get_Name_String (Imported_Path_Name_Id),
Directory => Current_Dir,
Resolve_Links =>
Opt.Follow_Links_For_Files,
Case_Sensitive => True);
Withed_Project : Project_Node_Id := Empty_Node;
begin
Previous_Project := Current_Project;
if No (Current_Project) then
-- First with clause of the context clause
Current_Project := Current_With.Node;
Imported_Projects := Current_Project;
else
Next_Project := Current_With.Node;
Set_Next_With_Clause_Of
(Current_Project, In_Tree, Next_Project);
Current_Project := Next_Project;
end if;
Set_String_Value_Of
(Current_Project,
In_Tree,
Name_Id (Current_With.Path));
Set_Location_Of
(Current_Project, In_Tree, Current_With.Location);
-- If it is a limited with, check if we have a circularity.
-- If we have one, get the project id of the limited
-- imported project file, and do not parse it.
if (In_Limited or Limited_Withs)
and then Project_Stack.Last > 1
then
declare
Canonical_Path_Name : Path_Name_Type;
begin
Name_Len := Resolved_Path'Length;
Name_Buffer (1 .. Name_Len) := Resolved_Path;
Canonical_Case_File_Name (Name_Buffer (1 .. Name_Len));
Canonical_Path_Name := Name_Find;
for Index in 1 .. Project_Stack.Last loop
if Project_Stack.Table (Index).Canonical_Path_Name =
Canonical_Path_Name
then
-- We have found the limited imported project,
-- get its project id, and do not parse it.
Withed_Project := Project_Stack.Table (Index).Id;
exit;
end if;
end loop;
end;
end if;
-- Parse the imported project if its project id is unknown
if No (Withed_Project) then
Parse_Single_Project
(In_Tree => In_Tree,
Project => Withed_Project,
Extends_All => Extends_All,
Path_Name_Id => Imported_Path_Name_Id,
Extended => False,
From_Extended => From_Extended,
In_Limited => In_Limited or Limited_Withs,
Packages_To_Check => Packages_To_Check,
Depth => Depth,
Current_Dir => Current_Dir,
Is_Config_File => Is_Config_File,
Env => Env);
else
Extends_All := Is_Extending_All (Withed_Project, In_Tree);
end if;
if No (Withed_Project) then
-- If parsing unsuccessful, remove the context clause
Current_Project := Previous_Project;
if No (Current_Project) then
Imported_Projects := Empty_Node;
else
Set_Next_With_Clause_Of
(Current_Project, In_Tree, Empty_Node);
end if;
else
-- If parsing was successful, record project name and
-- path name in with clause
Set_Project_Node_Of
(Node => Current_Project,
In_Tree => In_Tree,
To => Withed_Project,
Limited_With => Current_With.Limited_With);
Set_Name_Of
(Current_Project,
In_Tree,
Name_Of (Withed_Project, In_Tree));
Name_Len := Resolved_Path'Length;
Name_Buffer (1 .. Name_Len) := Resolved_Path;
Set_Path_Name_Of (Current_Project, In_Tree, Name_Find);
if Extends_All then
Set_Is_Extending_All (Current_Project, In_Tree);
end if;
end if;
end;
end if;
end if;
end loop;
end Post_Parse_Context_Clause;
---------------------------------
-- Check_Extending_All_Imports --
---------------------------------
procedure Check_Extending_All_Imports
(Flags : Processing_Flags;
In_Tree : Project_Node_Tree_Ref;
Project : Project_Node_Id)
is
With_Clause : Project_Node_Id;
Imported : Project_Node_Id;
begin
if not Is_Extending_All (Project, In_Tree) then
With_Clause := First_With_Clause_Of (Project, In_Tree);
while Present (With_Clause) loop
Imported := Project_Node_Of (With_Clause, In_Tree);
if Is_Extending_All (With_Clause, In_Tree) then
Error_Msg_Name_1 := Name_Of (Imported, In_Tree);
Error_Msg (Flags, "cannot import extending-all project %%",
Token_Ptr);
exit;
end if;
With_Clause := Next_With_Clause_Of (With_Clause, In_Tree);
end loop;
end if;
end Check_Extending_All_Imports;
-----------------------------
-- Check_Aggregate_Imports --
-----------------------------
procedure Check_Aggregate_Imports
(Flags : Processing_Flags;
In_Tree : Project_Node_Tree_Ref;
Project : Project_Node_Id)
is
With_Clause, Imported : Project_Node_Id;
begin
if Project_Qualifier_Of (Project, In_Tree) = Aggregate then
With_Clause := First_With_Clause_Of (Project, In_Tree);
while Present (With_Clause) loop
Imported := Project_Node_Of (With_Clause, In_Tree);
if Project_Qualifier_Of (Imported, In_Tree) /= Abstract_Project
then
Error_Msg_Name_1 := Name_Id (Path_Name_Of (Imported, In_Tree));
Error_Msg (Flags, "can only import abstract projects, not %%",
Token_Ptr);
exit;
end if;
With_Clause := Next_With_Clause_Of (With_Clause, In_Tree);
end loop;
end if;
end Check_Aggregate_Imports;
----------------------------
-- Check_Import_Aggregate --
----------------------------
procedure Check_Import_Aggregate
(Flags : Processing_Flags;
In_Tree : Project_Node_Tree_Ref;
Project : Project_Node_Id)
is
With_Clause : Project_Node_Id;
Imported : Project_Node_Id;
begin
if Project_Qualifier_Of (Project, In_Tree) /= Aggregate then
With_Clause := First_With_Clause_Of (Project, In_Tree);
while Present (With_Clause) loop
Imported := Project_Node_Of (With_Clause, In_Tree);
if Project_Qualifier_Of (Imported, In_Tree) = Aggregate then
Error_Msg_Name_1 := Name_Id (Path_Name_Of (Imported, In_Tree));
Error_Msg
(Flags, "cannot import aggregate project %%", Token_Ptr);
exit;
end if;
With_Clause := Next_With_Clause_Of (With_Clause, In_Tree);
end loop;
end if;
end Check_Import_Aggregate;
----------------------------
-- Read_Project_Qualifier --
----------------------------
procedure Read_Project_Qualifier
(Flags : Processing_Flags;
In_Tree : Project_Node_Tree_Ref;
Is_Config_File : Boolean;
Qualifier_Location : out Source_Ptr;
Project : Project_Node_Id)
is
Proj_Qualifier : Project_Qualifier := Unspecified;
begin
Qualifier_Location := Token_Ptr;
if Token = Tok_Abstract then
Proj_Qualifier := Abstract_Project;
Scan (In_Tree);
elsif Token = Tok_Identifier then
case Token_Name is
when Snames.Name_Standard =>
Proj_Qualifier := Standard;
Scan (In_Tree);
when Snames.Name_Aggregate =>
Proj_Qualifier := Aggregate;
Scan (In_Tree);
if Token = Tok_Identifier
and then Token_Name = Snames.Name_Library
then
Proj_Qualifier := Aggregate_Library;
Scan (In_Tree);
end if;
when Snames.Name_Library =>
Proj_Qualifier := Library;
Scan (In_Tree);
when Snames.Name_Configuration =>
if not Is_Config_File then
Error_Msg
(Flags,
"configuration projects cannot belong to a user" &
" project tree",
Token_Ptr);
end if;
Proj_Qualifier := Configuration;
Scan (In_Tree);
when others =>
null;
end case;
end if;
if Is_Config_File and then Proj_Qualifier = Unspecified then
-- Set the qualifier to Configuration, even if the token doesn't
-- exist in the source file itself, so that we can differentiate
-- project files and configuration files later on.
Proj_Qualifier := Configuration;
end if;
if Proj_Qualifier /= Unspecified then
if Is_Config_File
and then Proj_Qualifier /= Configuration
then
Error_Msg (Flags,
"a configuration project cannot be qualified except " &
"as configuration project",
Qualifier_Location);
end if;
Set_Project_Qualifier_Of (Project, In_Tree, Proj_Qualifier);
end if;
end Read_Project_Qualifier;
-------------------------------
-- Has_Circular_Dependencies --
-------------------------------
function Has_Circular_Dependencies
(Flags : Processing_Flags;
Normed_Path_Name : Path_Name_Type;
Canonical_Path_Name : Path_Name_Type) return Boolean is
begin
for Index in reverse 1 .. Project_Stack.Last loop
exit when Project_Stack.Table (Index).Limited_With;
if Canonical_Path_Name =
Project_Stack.Table (Index).Canonical_Path_Name
then
Error_Msg (Flags, "circular dependency detected", Token_Ptr);
Error_Msg_Name_1 := Name_Id (Normed_Path_Name);
Error_Msg (Flags, "\ %% is imported by", Token_Ptr);
for Current in reverse 1 .. Project_Stack.Last loop
Error_Msg_Name_1 :=
Name_Id (Project_Stack.Table (Current).Path_Name);
if Project_Stack.Table (Current).Canonical_Path_Name /=
Canonical_Path_Name
then
Error_Msg
(Flags, "\ %% which itself is imported by", Token_Ptr);
else
Error_Msg (Flags, "\ %%", Token_Ptr);
exit;
end if;
end loop;
return True;
end if;
end loop;
return False;
end Has_Circular_Dependencies;
--------------------------
-- Parse_Single_Project --
--------------------------
procedure Parse_Single_Project
(In_Tree : Project_Node_Tree_Ref;
Project : out Project_Node_Id;
Extends_All : out Boolean;
Path_Name_Id : Path_Name_Type;
Extended : Boolean;
From_Extended : Extension_Origin;
In_Limited : Boolean;
Packages_To_Check : String_List_Access;
Depth : Natural;
Current_Dir : String;
Is_Config_File : Boolean;
Env : in out Environment;
Implicit_Project : Boolean := False)
is
Path_Name : constant String := Get_Name_String (Path_Name_Id);
Normed_Path_Name : Path_Name_Type;
Canonical_Path_Name : Path_Name_Type;
Resolved_Path_Name : Path_Name_Type;
Project_Directory : Path_Name_Type;
Project_Scan_State : Saved_Project_Scan_State;
Source_Index : Source_File_Index;
Extending : Boolean := False;
Extended_Project : Project_Node_Id := Empty_Node;
A_Project_Name_And_Node : Tree_Private_Part.Project_Name_And_Node :=
Tree_Private_Part.Projects_Htable.Get_First
(In_Tree.Projects_HT);
Name_From_Path : constant Name_Id :=
Project_Name_From (Path_Name, Is_Config_File => Is_Config_File);
Name_Of_Project : Name_Id := No_Name;
Duplicated : Boolean := False;
First_With : With_Id;
Imported_Projects : Project_Node_Id := Empty_Node;
use Tree_Private_Part;
Project_Comment_State : Tree.Comment_State;
Qualifier_Location : Source_Ptr;
begin
Extends_All := False;
declare
Normed_Path : constant String := Normalize_Pathname
(Path_Name,
Directory => Current_Dir,
Resolve_Links => False,
Case_Sensitive => True);
Canonical_Path : constant String := Normalize_Pathname
(Normed_Path,
Directory => Current_Dir,
Resolve_Links => Opt.Follow_Links_For_Files,
Case_Sensitive => False);
begin
Name_Len := Normed_Path'Length;
Name_Buffer (1 .. Name_Len) := Normed_Path;
Normed_Path_Name := Name_Find;
Name_Len := Canonical_Path'Length;
Name_Buffer (1 .. Name_Len) := Canonical_Path;
Canonical_Path_Name := Name_Find;
if Opt.Follow_Links_For_Files then
Resolved_Path_Name := Canonical_Path_Name;
else
Name_Len := 0;
Add_Str_To_Name_Buffer
(Normalize_Pathname
(Canonical_Path,
Resolve_Links => True,
Case_Sensitive => False));
Resolved_Path_Name := Name_Find;
end if;
end;
if Has_Circular_Dependencies
(Env.Flags, Normed_Path_Name, Canonical_Path_Name)
then
Project := Empty_Node;
return;
end if;
-- Put the new path name on the stack
Project_Stack.Append
((Path_Name => Normed_Path_Name,
Canonical_Path_Name => Canonical_Path_Name,
Id => Empty_Node,
Limited_With => In_Limited));
-- Check if the project file has already been parsed
while
A_Project_Name_And_Node /= Tree_Private_Part.No_Project_Name_And_Node
loop
if A_Project_Name_And_Node.Resolved_Path = Resolved_Path_Name then
if Extended then
if A_Project_Name_And_Node.Extended then
if A_Project_Name_And_Node.Proj_Qualifier /= Abstract_Project
then
Error_Msg
(Env.Flags,
"cannot extend the same project file several times",
Token_Ptr);
end if;
elsif not A_Project_Name_And_Node.From_Extended then
Error_Msg
(Env.Flags,
"cannot extend an already imported project file",
Token_Ptr);
else
-- Register this project as being extended
A_Project_Name_And_Node.Extended := True;
Tree_Private_Part.Projects_Htable.Set
(In_Tree.Projects_HT,
A_Project_Name_And_Node.Name,
A_Project_Name_And_Node);
end if;
elsif A_Project_Name_And_Node.Extended then
Extends_All :=
Is_Extending_All (A_Project_Name_And_Node.Node, In_Tree);
-- If the imported project is an extended project A, and we are
-- in an extended project, replace A with the ultimate project
-- extending A.
if From_Extended /= None then
declare
Decl : Project_Node_Id :=
Project_Declaration_Of
(A_Project_Name_And_Node.Node, In_Tree);
Prj : Project_Node_Id :=
A_Project_Name_And_Node.Node;
begin
-- Loop through extending projects to find the ultimate
-- extending project, that is the one that is not
-- extended. For an abstract project, as it can be
-- extended several times, there is no extending project
-- registered, so the loop does not execute and the
-- resulting project is the abstract project.
while
Extending_Project_Of (Decl, In_Tree) /= Empty_Node
loop
Prj := Extending_Project_Of (Decl, In_Tree);
Decl := Project_Declaration_Of (Prj, In_Tree);
end loop;
A_Project_Name_And_Node.Node := Prj;
end;
else
Error_Msg
(Env.Flags,
"cannot import an already extended project file",
Token_Ptr);
end if;
elsif A_Project_Name_And_Node.From_Extended then
-- This project is now imported from a non extending project.
-- Indicate this in has table Projects.HT.
A_Project_Name_And_Node.From_Extended := False;
Tree_Private_Part.Projects_Htable.Set
(In_Tree.Projects_HT,
A_Project_Name_And_Node.Name,
A_Project_Name_And_Node);
end if;
Project := A_Project_Name_And_Node.Node;
Project_Stack.Decrement_Last;
return;
end if;
A_Project_Name_And_Node :=
Tree_Private_Part.Projects_Htable.Get_Next (In_Tree.Projects_HT);
end loop;
-- We never encountered this project file. Save the scan state, load the
-- project file and start to scan it.
Save_Project_Scan_State (Project_Scan_State);
Source_Index := Load_Project_File (Path_Name);
Tree.Save (Project_Comment_State);
-- If we cannot find it, we stop
if Source_Index = No_Source_File then
Project := Empty_Node;
Project_Stack.Decrement_Last;
return;
end if;
Prj.Err.Scanner.Initialize_Scanner (Source_Index);
Tree.Reset_State;
Scan (In_Tree);
if not Is_Config_File
and then Name_From_Path = No_Name
and then not Implicit_Project
then
-- The project file name is not correct (no or bad extension, or not
-- following Ada identifier's syntax).
Error_Msg_File_1 := File_Name_Type (Canonical_Path_Name);
Error_Msg (Env.Flags,
"?{ is not a valid path name for a project file",
Token_Ptr);
end if;
if Current_Verbosity >= Medium then
Debug_Increase_Indent ("Parsing """ & Path_Name & '"');
end if;
Project_Directory :=
Path_Name_Type (Get_Directory (File_Name_Type (Normed_Path_Name)));
-- Is there any imported project?
Pre_Parse_Context_Clause
(In_Tree => In_Tree,
Is_Config_File => Is_Config_File,
Context_Clause => First_With,
Flags => Env.Flags);
Project := Default_Project_Node
(Of_Kind => N_Project, In_Tree => In_Tree);
Project_Stack.Table (Project_Stack.Last).Id := Project;
Set_Directory_Of (Project, In_Tree, Project_Directory);
Set_Path_Name_Of (Project, In_Tree, Normed_Path_Name);
Read_Project_Qualifier
(Env.Flags, In_Tree, Is_Config_File, Qualifier_Location, Project);
Set_Location_Of (Project, In_Tree, Token_Ptr);
Expect (Tok_Project, "PROJECT");
-- Mark location of PROJECT token if present
if Token = Tok_Project then
Scan (In_Tree); -- past PROJECT
Set_Location_Of (Project, In_Tree, Token_Ptr);
end if;
-- Clear the Buffer
Buffer_Last := 0;
loop
Expect (Tok_Identifier, "identifier");
-- If the token is not an identifier, clear the buffer before
-- exiting to indicate that the name of the project is ill-formed.
if Token /= Tok_Identifier then
Buffer_Last := 0;
exit;
end if;
-- Add the identifier name to the buffer
Get_Name_String (Token_Name);
Add_To_Buffer (Name_Buffer (1 .. Name_Len), Buffer, Buffer_Last);
-- Scan past the identifier
Scan (In_Tree);
-- If we have a dot, add a dot to the Buffer and look for the next
-- identifier.
exit when Token /= Tok_Dot;
Add_To_Buffer (".", Buffer, Buffer_Last);
-- Scan past the dot
Scan (In_Tree);
end loop;
-- See if this is an extending project
if Token = Tok_Extends then
if Is_Config_File then
Error_Msg
(Env.Flags,
"extending configuration project not allowed", Token_Ptr);
end if;
-- Make sure that gnatmake will use mapping files
Opt.Create_Mapping_File := True;
-- We are extending another project
Extending := True;
Scan (In_Tree); -- past EXTENDS
if Token = Tok_All then
Extends_All := True;
Set_Is_Extending_All (Project, In_Tree);
Scan (In_Tree); -- scan past ALL
end if;
end if;
-- If the name is well formed, Buffer_Last is > 0
if Buffer_Last > 0 then
-- The Buffer contains the name of the project
Name_Len := Buffer_Last;
Name_Buffer (1 .. Name_Len) := Buffer (1 .. Buffer_Last);
Name_Of_Project := Name_Find;
Set_Name_Of (Project, In_Tree, Name_Of_Project);
-- To get expected name of the project file, replace dots by dashes
for Index in 1 .. Name_Len loop
if Name_Buffer (Index) = '.' then
Name_Buffer (Index) := '-';
end if;
end loop;
Canonical_Case_File_Name (Name_Buffer (1 .. Name_Len));
declare
Expected_Name : constant Name_Id := Name_Find;
Extension : String_Access;
begin
-- Output a warning if the actual name is not the expected name
if not Is_Config_File
and then (Name_From_Path /= No_Name)
and then Expected_Name /= Name_From_Path
then
Error_Msg_Name_1 := Expected_Name;
if Is_Config_File then
Extension := new String'(Config_Project_File_Extension);
else
Extension := new String'(Project_File_Extension);
end if;
Error_Msg
(Env.Flags,
"?file name does not match project name, should be `%%"
& Extension.all & "`",
Token_Ptr);
end if;
end;
-- Read the original casing of the project name and put it in the
-- project node.
declare
Loc : Source_Ptr;
begin
Loc := Location_Of (Project, In_Tree);
for J in 1 .. Name_Len loop
Name_Buffer (J) := Sinput.Source (Loc);
Loc := Loc + 1;
end loop;
Set_Display_Name_Of (Project, In_Tree, Name_Find);
end;
declare
From_Ext : Extension_Origin := None;
begin
-- Extending_All is always propagated
if From_Extended = Extending_All or else Extends_All then
From_Ext := Extending_All;
-- Otherwise, From_Extended is set to Extending_Single if the
-- current project is an extending project.
elsif Extended then
From_Ext := Extending_Simple;
end if;
Post_Parse_Context_Clause
(In_Tree => In_Tree,
Context_Clause => First_With,
In_Limited => In_Limited,
Limited_Withs => False,
Imported_Projects => Imported_Projects,
Project_Directory => Project_Directory,
From_Extended => From_Ext,
Packages_To_Check => Packages_To_Check,
Depth => Depth + 1,
Current_Dir => Current_Dir,
Is_Config_File => Is_Config_File,
Env => Env);
Set_First_With_Clause_Of (Project, In_Tree, Imported_Projects);
end;
if not Is_Config_File then
declare
Name_And_Node : Tree_Private_Part.Project_Name_And_Node :=
Tree_Private_Part.Projects_Htable.Get_First
(In_Tree.Projects_HT);
Project_Name : Name_Id := Name_And_Node.Name;
begin
-- Check if we already have a project with this name
while Project_Name /= No_Name
and then Project_Name /= Name_Of_Project
loop
Name_And_Node :=
Tree_Private_Part.Projects_Htable.Get_Next
(In_Tree.Projects_HT);
Project_Name := Name_And_Node.Name;
end loop;
-- Report an error if we already have a project with this name
if Project_Name /= No_Name then
Duplicated := True;
Error_Msg_Name_1 := Project_Name;
Error_Msg
(Env.Flags, "duplicate project name %%",
Location_Of (Project, In_Tree));
Error_Msg_Name_1 :=
Name_Id (Path_Name_Of (Name_And_Node.Node, In_Tree));
Error_Msg
(Env.Flags,
"\already in %%", Location_Of (Project, In_Tree));
end if;
end;
end if;
end if;
if Extending then
Expect (Tok_String_Literal, "literal string");
if Token = Tok_String_Literal then
Set_Extended_Project_Path_Of
(Project,
In_Tree,
Path_Name_Type (Token_Name));
declare
Original_Path_Name : constant String :=
Get_Name_String (Token_Name);
Extended_Project_Path_Name_Id : Path_Name_Type;
begin
Find_Project
(Env.Project_Path,
Project_File_Name => Original_Path_Name,
Directory => Get_Name_String (Project_Directory),
Path => Extended_Project_Path_Name_Id);
if Extended_Project_Path_Name_Id = No_Path then
-- We could not find the project file to extend
Error_Msg_Name_1 := Token_Name;
Error_Msg (Env.Flags, "unknown project file: %%", Token_Ptr);
-- If not in the main project file, display the import path
if Project_Stack.Last > 1 then
Error_Msg_Name_1 :=
Name_Id
(Project_Stack.Table (Project_Stack.Last).Path_Name);
Error_Msg (Env.Flags, "\extended by %%", Token_Ptr);
for Index in reverse 1 .. Project_Stack.Last - 1 loop
Error_Msg_Name_1 :=
Name_Id
(Project_Stack.Table (Index).Path_Name);
Error_Msg (Env.Flags, "\imported by %%", Token_Ptr);
end loop;
end if;
else
declare
From_Ext : Extension_Origin := None;
begin
if From_Extended = Extending_All or else Extends_All then
From_Ext := Extending_All;
end if;
Parse_Single_Project
(In_Tree => In_Tree,
Project => Extended_Project,
Extends_All => Extends_All,
Path_Name_Id => Extended_Project_Path_Name_Id,
Extended => True,
From_Extended => From_Ext,
In_Limited => In_Limited,
Packages_To_Check => Packages_To_Check,
Depth => Depth + 1,
Current_Dir => Current_Dir,
Is_Config_File => Is_Config_File,
Env => Env);
end;
if Present (Extended_Project) then
if Project_Qualifier_Of (Extended_Project, In_Tree) =
Aggregate
then
Error_Msg_Name_1 :=
Name_Id (Path_Name_Of (Extended_Project, In_Tree));
Error_Msg
(Env.Flags,
"cannot extend aggregate project %%",
Location_Of (Project, In_Tree));
end if;
-- A project that extends an extending-all project is
-- also an extending-all project.
if Is_Extending_All (Extended_Project, In_Tree) then
Set_Is_Extending_All (Project, In_Tree);
end if;
-- An abstract project can only extend an abstract
-- project. Otherwise we may have an abstract project
-- with sources if it inherits sources from the project
-- it extends.
if Project_Qualifier_Of (Project, In_Tree) =
Abstract_Project
and then
Project_Qualifier_Of (Extended_Project, In_Tree) /=
Abstract_Project
then
Error_Msg
(Env.Flags, "an abstract project can only extend " &
"another abstract project",
Qualifier_Location);
end if;
end if;
end if;
end;
Scan (In_Tree); -- past the extended project path
end if;
end if;
Check_Extending_All_Imports (Env.Flags, In_Tree, Project);
Check_Aggregate_Imports (Env.Flags, In_Tree, Project);
Check_Import_Aggregate (Env.Flags, In_Tree, Project);
-- Check that a project with a name including a dot either imports
-- or extends the project whose name precedes the last dot.
if Name_Of_Project /= No_Name then
Get_Name_String (Name_Of_Project);
else
Name_Len := 0;
end if;
-- Look for the last dot
while Name_Len > 0 and then Name_Buffer (Name_Len) /= '.' loop
Name_Len := Name_Len - 1;
end loop;
-- If a dot was found, check if parent project is imported or extended
if Name_Len > 0 then
Name_Len := Name_Len - 1;
declare
Parent_Name : constant Name_Id := Name_Find;
Parent_Found : Boolean := False;
Parent_Node : Project_Node_Id := Empty_Node;
With_Clause : Project_Node_Id :=
First_With_Clause_Of (Project, In_Tree);
Imp_Proj_Name : Name_Id;
begin
-- If there is an extended project, check its name
if Present (Extended_Project) then
Parent_Node := Extended_Project;
Parent_Found :=
Name_Of (Extended_Project, In_Tree) = Parent_Name;
end if;
-- If the parent project is not the extended project,
-- check each imported project until we find the parent project.
Imported_Loop :
while not Parent_Found and then Present (With_Clause) loop
Parent_Node := Project_Node_Of (With_Clause, In_Tree);
Extension_Loop : while Present (Parent_Node) loop
Imp_Proj_Name := Name_Of (Parent_Node, In_Tree);
Parent_Found := Imp_Proj_Name = Parent_Name;
exit Imported_Loop when Parent_Found;
Parent_Node :=
Extended_Project_Of
(Project_Declaration_Of (Parent_Node, In_Tree),
In_Tree);
end loop Extension_Loop;
With_Clause := Next_With_Clause_Of (With_Clause, In_Tree);
end loop Imported_Loop;
if Parent_Found then
Set_Parent_Project_Of (Project, In_Tree, To => Parent_Node);
else
-- If the parent project was not found, report an error
Error_Msg_Name_1 := Name_Of_Project;
Error_Msg_Name_2 := Parent_Name;
Error_Msg (Env.Flags,
"project %% does not import or extend project %%",
Location_Of (Project, In_Tree));
end if;
end;
end if;
Expect (Tok_Is, "IS");
Set_End_Of_Line (Project);
Set_Previous_Line_Node (Project);
Set_Next_End_Node (Project);
declare
Project_Declaration : Project_Node_Id := Empty_Node;
begin
-- No need to Scan past "is", Prj.Dect.Parse will do it
Prj.Dect.Parse
(In_Tree => In_Tree,
Declarations => Project_Declaration,
Current_Project => Project,
Extends => Extended_Project,
Packages_To_Check => Packages_To_Check,
Is_Config_File => Is_Config_File,
Flags => Env.Flags);
Set_Project_Declaration_Of (Project, In_Tree, Project_Declaration);
if Present (Extended_Project)
and then Project_Qualifier_Of (Extended_Project, In_Tree) /=
Abstract_Project
then
Set_Extending_Project_Of
(Project_Declaration_Of (Extended_Project, In_Tree), In_Tree,
To => Project);
end if;
end;
Expect (Tok_End, "END");
Remove_Next_End_Node;
-- Skip "end" if present
if Token = Tok_End then
Scan (In_Tree);
end if;
-- Clear the Buffer
Buffer_Last := 0;
-- Store the name following "end" in the Buffer. The name may be made of
-- several simple names.
loop
Expect (Tok_Identifier, "identifier");
-- If we don't have an identifier, clear the buffer before exiting to
-- avoid checking the name.
if Token /= Tok_Identifier then
Buffer_Last := 0;
exit;
end if;
-- Add the identifier to the Buffer
Get_Name_String (Token_Name);
Add_To_Buffer (Name_Buffer (1 .. Name_Len), Buffer, Buffer_Last);
-- Scan past the identifier
Scan (In_Tree);
exit when Token /= Tok_Dot;
Add_To_Buffer (".", Buffer, Buffer_Last);
Scan (In_Tree);
end loop;
-- If we have a valid name, check if it is the name of the project
if Name_Of_Project /= No_Name and then Buffer_Last > 0 then
if To_Lower (Buffer (1 .. Buffer_Last)) /=
Get_Name_String (Name_Of (Project, In_Tree))
then
-- Invalid name: report an error
Error_Msg (Env.Flags, "expected """ &
Get_Name_String (Name_Of (Project, In_Tree)) & """",
Token_Ptr);
end if;
end if;
Expect (Tok_Semicolon, "`;`");
-- Check that there is no more text following the end of the project
-- source.
if Token = Tok_Semicolon then
Set_Previous_End_Node (Project);
Scan (In_Tree);
if Token /= Tok_EOF then
Error_Msg
(Env.Flags,
"unexpected text following end of project", Token_Ptr);
end if;
end if;
if not Duplicated and then Name_Of_Project /= No_Name then
-- Add the name of the project to the hash table, so that we can
-- check that no other subsequent project will have the same name.
Tree_Private_Part.Projects_Htable.Set
(T => In_Tree.Projects_HT,
K => Name_Of_Project,
E => (Name => Name_Of_Project,
Node => Project,
Resolved_Path => Resolved_Path_Name,
Extended => Extended,
From_Extended => From_Extended /= None,
Proj_Qualifier => Project_Qualifier_Of (Project, In_Tree)));
end if;
declare
From_Ext : Extension_Origin := None;
begin
-- Extending_All is always propagated
if From_Extended = Extending_All or else Extends_All then
From_Ext := Extending_All;
-- Otherwise, From_Extended is set to Extending_Single if the
-- current project is an extending project.
elsif Extended then
From_Ext := Extending_Simple;
end if;
Post_Parse_Context_Clause
(In_Tree => In_Tree,
Context_Clause => First_With,
In_Limited => In_Limited,
Limited_Withs => True,
Imported_Projects => Imported_Projects,
Project_Directory => Project_Directory,
From_Extended => From_Ext,
Packages_To_Check => Packages_To_Check,
Depth => Depth + 1,
Current_Dir => Current_Dir,
Is_Config_File => Is_Config_File,
Env => Env);
Set_First_With_Clause_Of (Project, In_Tree, Imported_Projects);
end;
-- Restore the scan state, in case we are not the main project
Restore_Project_Scan_State (Project_Scan_State);
-- And remove the project from the project stack
Project_Stack.Decrement_Last;
-- Indicate if there are unkept comments
Tree.Set_Project_File_Includes_Unkept_Comments
(Node => Project,
In_Tree => In_Tree,
To => Tree.There_Are_Unkept_Comments);
-- And restore the comment state that was saved
Tree.Restore_And_Free (Project_Comment_State);
Debug_Decrease_Indent;
if Project /= Empty_Node and then Implicit_Project then
Name_Len := 0;
Add_Str_To_Name_Buffer (Current_Dir);
Add_Char_To_Name_Buffer (Dir_Sep);
In_Tree.Project_Nodes.Table (Project).Directory := Name_Find;
end if;
end Parse_Single_Project;
-----------------------
-- Project_Name_From --
-----------------------
function Project_Name_From
(Path_Name : String;
Is_Config_File : Boolean) return Name_Id
is
Canonical : String (1 .. Path_Name'Length) := Path_Name;
First : Natural := Canonical'Last;
Last : Natural := First;
Index : Positive;
begin
if Current_Verbosity = High then
Debug_Output ("Project_Name_From (""" & Canonical & """)");
end if;
-- If the path name is empty, return No_Name to indicate failure
if First = 0 then
return No_Name;
end if;
Canonical_Case_File_Name (Canonical);
-- Look for the last dot in the path name
while First > 0
and then
Canonical (First) /= '.'
loop
First := First - 1;
end loop;
-- If we have a dot, check that it is followed by the correct extension
if First > 0 and then Canonical (First) = '.' then
if (not Is_Config_File
and then Canonical (First .. Last) = Project_File_Extension
and then First /= 1)
or else
(Is_Config_File
and then
Canonical (First .. Last) = Config_Project_File_Extension
and then First /= 1)
then
-- Look for the last directory separator, if any
First := First - 1;
Last := First;
while First > 0
and then Canonical (First) /= '/'
and then Canonical (First) /= Dir_Sep
loop
First := First - 1;
end loop;
else
-- Not the correct extension, return No_Name to indicate failure
return No_Name;
end if;
-- If no dot in the path name, return No_Name to indicate failure
else
return No_Name;
end if;
First := First + 1;
-- If the extension is the file name, return No_Name to indicate failure
if First > Last then
return No_Name;
end if;
-- Put the name in lower case into Name_Buffer
Name_Len := Last - First + 1;
Name_Buffer (1 .. Name_Len) := To_Lower (Canonical (First .. Last));
Index := 1;
-- Check if it is a well formed project name. Return No_Name if it is
-- ill formed.
loop
if not Is_Letter (Name_Buffer (Index)) then
return No_Name;
else
loop
Index := Index + 1;
exit when Index >= Name_Len;
if Name_Buffer (Index) = '_' then
if Name_Buffer (Index + 1) = '_' then
return No_Name;
end if;
end if;
exit when Name_Buffer (Index) = '-';
if Name_Buffer (Index) /= '_'
and then not Is_Alphanumeric (Name_Buffer (Index))
then
return No_Name;
end if;
end loop;
end if;
if Index >= Name_Len then
if Is_Alphanumeric (Name_Buffer (Name_Len)) then
-- All checks have succeeded. Return name in Name_Buffer
return Name_Find;
else
return No_Name;
end if;
elsif Name_Buffer (Index) = '-' then
Index := Index + 1;
end if;
end loop;
end Project_Name_From;
end Prj.Part;