| /* Definitions for the Blackfin port. |
| Copyright (C) 2005-2018 Free Software Foundation, Inc. |
| Contributed by Analog Devices. |
| |
| This file is part of GCC. |
| |
| GCC is free software; you can redistribute it and/or modify it |
| under the terms of the GNU General Public License as published |
| by the Free Software Foundation; either version 3, or (at your |
| option) any later version. |
| |
| GCC is distributed in the hope that it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public |
| License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with GCC; see the file COPYING3. If not see |
| <http://www.gnu.org/licenses/>. */ |
| |
| #ifndef _BFIN_CONFIG |
| #define _BFIN_CONFIG |
| |
| #ifndef BFIN_OPTS_H |
| #include "config/bfin/bfin-opts.h" |
| #endif |
| |
| #define OBJECT_FORMAT_ELF |
| |
| #define BRT 1 |
| #define BRF 0 |
| |
| /* Predefinition in the preprocessor for this target machine */ |
| #ifndef TARGET_CPU_CPP_BUILTINS |
| #define TARGET_CPU_CPP_BUILTINS() \ |
| do \ |
| { \ |
| builtin_define_std ("bfin"); \ |
| builtin_define_std ("BFIN"); \ |
| builtin_define ("__ADSPBLACKFIN__"); \ |
| builtin_define ("__ADSPLPBLACKFIN__"); \ |
| \ |
| switch (bfin_cpu_type) \ |
| { \ |
| case BFIN_CPU_UNKNOWN: \ |
| break; \ |
| case BFIN_CPU_BF512: \ |
| builtin_define ("__ADSPBF512__"); \ |
| builtin_define ("__ADSPBF51x__"); \ |
| break; \ |
| case BFIN_CPU_BF514: \ |
| builtin_define ("__ADSPBF514__"); \ |
| builtin_define ("__ADSPBF51x__"); \ |
| break; \ |
| case BFIN_CPU_BF516: \ |
| builtin_define ("__ADSPBF516__"); \ |
| builtin_define ("__ADSPBF51x__"); \ |
| break; \ |
| case BFIN_CPU_BF518: \ |
| builtin_define ("__ADSPBF518__"); \ |
| builtin_define ("__ADSPBF51x__"); \ |
| break; \ |
| case BFIN_CPU_BF522: \ |
| builtin_define ("__ADSPBF522__"); \ |
| builtin_define ("__ADSPBF52x__"); \ |
| break; \ |
| case BFIN_CPU_BF523: \ |
| builtin_define ("__ADSPBF523__"); \ |
| builtin_define ("__ADSPBF52x__"); \ |
| break; \ |
| case BFIN_CPU_BF524: \ |
| builtin_define ("__ADSPBF524__"); \ |
| builtin_define ("__ADSPBF52x__"); \ |
| break; \ |
| case BFIN_CPU_BF525: \ |
| builtin_define ("__ADSPBF525__"); \ |
| builtin_define ("__ADSPBF52x__"); \ |
| break; \ |
| case BFIN_CPU_BF526: \ |
| builtin_define ("__ADSPBF526__"); \ |
| builtin_define ("__ADSPBF52x__"); \ |
| break; \ |
| case BFIN_CPU_BF527: \ |
| builtin_define ("__ADSPBF527__"); \ |
| builtin_define ("__ADSPBF52x__"); \ |
| break; \ |
| case BFIN_CPU_BF531: \ |
| builtin_define ("__ADSPBF531__"); \ |
| break; \ |
| case BFIN_CPU_BF532: \ |
| builtin_define ("__ADSPBF532__"); \ |
| break; \ |
| case BFIN_CPU_BF533: \ |
| builtin_define ("__ADSPBF533__"); \ |
| break; \ |
| case BFIN_CPU_BF534: \ |
| builtin_define ("__ADSPBF534__"); \ |
| break; \ |
| case BFIN_CPU_BF536: \ |
| builtin_define ("__ADSPBF536__"); \ |
| break; \ |
| case BFIN_CPU_BF537: \ |
| builtin_define ("__ADSPBF537__"); \ |
| break; \ |
| case BFIN_CPU_BF538: \ |
| builtin_define ("__ADSPBF538__"); \ |
| break; \ |
| case BFIN_CPU_BF539: \ |
| builtin_define ("__ADSPBF539__"); \ |
| break; \ |
| case BFIN_CPU_BF542M: \ |
| builtin_define ("__ADSPBF542M__"); \ |
| /* FALLTHRU */ \ |
| case BFIN_CPU_BF542: \ |
| builtin_define ("__ADSPBF542__"); \ |
| builtin_define ("__ADSPBF54x__"); \ |
| break; \ |
| case BFIN_CPU_BF544M: \ |
| builtin_define ("__ADSPBF544M__"); \ |
| /* FALLTHRU */ \ |
| case BFIN_CPU_BF544: \ |
| builtin_define ("__ADSPBF544__"); \ |
| builtin_define ("__ADSPBF54x__"); \ |
| break; \ |
| case BFIN_CPU_BF547M: \ |
| builtin_define ("__ADSPBF547M__"); \ |
| /* FALLTHRU */ \ |
| case BFIN_CPU_BF547: \ |
| builtin_define ("__ADSPBF547__"); \ |
| builtin_define ("__ADSPBF54x__"); \ |
| break; \ |
| case BFIN_CPU_BF548M: \ |
| builtin_define ("__ADSPBF548M__"); \ |
| /* FALLTHRU */ \ |
| case BFIN_CPU_BF548: \ |
| builtin_define ("__ADSPBF548__"); \ |
| builtin_define ("__ADSPBF54x__"); \ |
| break; \ |
| case BFIN_CPU_BF549M: \ |
| builtin_define ("__ADSPBF549M__"); \ |
| /* FALLTHRU */ \ |
| case BFIN_CPU_BF549: \ |
| builtin_define ("__ADSPBF549__"); \ |
| builtin_define ("__ADSPBF54x__"); \ |
| break; \ |
| case BFIN_CPU_BF561: \ |
| builtin_define ("__ADSPBF561__"); \ |
| break; \ |
| case BFIN_CPU_BF592: \ |
| builtin_define ("__ADSPBF592__"); \ |
| builtin_define ("__ADSPBF59x__"); \ |
| break; \ |
| } \ |
| \ |
| if (bfin_si_revision != -1) \ |
| { \ |
| /* space of 0xnnnn and a NUL */ \ |
| char *buf = XALLOCAVEC (char, 7); \ |
| \ |
| sprintf (buf, "0x%04x", bfin_si_revision); \ |
| builtin_define_with_value ("__SILICON_REVISION__", buf, 0); \ |
| } \ |
| \ |
| if (bfin_workarounds) \ |
| builtin_define ("__WORKAROUNDS_ENABLED"); \ |
| if (ENABLE_WA_SPECULATIVE_LOADS) \ |
| builtin_define ("__WORKAROUND_SPECULATIVE_LOADS"); \ |
| if (ENABLE_WA_SPECULATIVE_SYNCS) \ |
| builtin_define ("__WORKAROUND_SPECULATIVE_SYNCS"); \ |
| if (ENABLE_WA_INDIRECT_CALLS) \ |
| builtin_define ("__WORKAROUND_INDIRECT_CALLS"); \ |
| if (ENABLE_WA_RETS) \ |
| builtin_define ("__WORKAROUND_RETS"); \ |
| \ |
| if (TARGET_FDPIC) \ |
| { \ |
| builtin_define ("__BFIN_FDPIC__"); \ |
| builtin_define ("__FDPIC__"); \ |
| } \ |
| if (TARGET_ID_SHARED_LIBRARY \ |
| && !TARGET_SEP_DATA) \ |
| builtin_define ("__ID_SHARED_LIB__"); \ |
| if (flag_no_builtin) \ |
| builtin_define ("__NO_BUILTIN"); \ |
| if (TARGET_MULTICORE) \ |
| builtin_define ("__BFIN_MULTICORE"); \ |
| if (TARGET_COREA) \ |
| builtin_define ("__BFIN_COREA"); \ |
| if (TARGET_COREB) \ |
| builtin_define ("__BFIN_COREB"); \ |
| if (TARGET_SDRAM) \ |
| builtin_define ("__BFIN_SDRAM"); \ |
| } \ |
| while (0) |
| #endif |
| |
| #define DRIVER_SELF_SPECS SUBTARGET_DRIVER_SELF_SPECS "\ |
| %{mleaf-id-shared-library:%{!mid-shared-library:-mid-shared-library}} \ |
| %{mfdpic:%{!fpic:%{!fpie:%{!fPIC:%{!fPIE:\ |
| %{!fno-pic:%{!fno-pie:%{!fno-PIC:%{!fno-PIE:-fpie}}}}}}}}} \ |
| " |
| #ifndef SUBTARGET_DRIVER_SELF_SPECS |
| # define SUBTARGET_DRIVER_SELF_SPECS |
| #endif |
| |
| #define LINK_GCC_C_SEQUENCE_SPEC "\ |
| %{mfast-fp:-lbffastfp} %G %L %{mfast-fp:-lbffastfp} %G \ |
| " |
| |
| #undef ASM_SPEC |
| #define ASM_SPEC "\ |
| %{mno-fdpic:-mnopic} %{mfdpic}" |
| |
| #define LINK_SPEC "\ |
| %{h*} %{v:-V} \ |
| %{mfdpic:-melf32bfinfd -z text} \ |
| %{static:-dn -Bstatic} \ |
| %{shared:-G -Bdynamic} \ |
| %{symbolic:-Bsymbolic} \ |
| -init __init -fini __fini " |
| |
| /* Generate DSP instructions, like DSP halfword loads */ |
| #define TARGET_DSP (1) |
| |
| #define TARGET_DEFAULT 0 |
| |
| /* Maximum number of library ids we permit */ |
| #define MAX_LIBRARY_ID 255 |
| |
| extern const char *bfin_library_id_string; |
| |
| #define FUNCTION_MODE SImode |
| #define Pmode SImode |
| |
| /* store-condition-codes instructions store 0 for false |
| This is the value stored for true. */ |
| #define STORE_FLAG_VALUE 1 |
| |
| /* Define this if pushing a word on the stack |
| makes the stack pointer a smaller address. */ |
| #define STACK_GROWS_DOWNWARD 1 |
| |
| #define STACK_PUSH_CODE PRE_DEC |
| |
| /* Define this to nonzero if the nominal address of the stack frame |
| is at the high-address end of the local variables; |
| that is, each additional local variable allocated |
| goes at a more negative offset in the frame. */ |
| #define FRAME_GROWS_DOWNWARD 1 |
| |
| /* We define a dummy ARGP register; the parameters start at offset 0 from |
| it. */ |
| #define FIRST_PARM_OFFSET(DECL) 0 |
| |
| /* Register to use for pushing function arguments. */ |
| #define STACK_POINTER_REGNUM REG_P6 |
| |
| /* Base register for access to local variables of the function. */ |
| #define FRAME_POINTER_REGNUM REG_P7 |
| |
| /* A dummy register that will be eliminated to either FP or SP. */ |
| #define ARG_POINTER_REGNUM REG_ARGP |
| |
| /* `PIC_OFFSET_TABLE_REGNUM' |
| The register number of the register used to address a table of |
| static data addresses in memory. In some cases this register is |
| defined by a processor's "application binary interface" (ABI). |
| When this macro is defined, RTL is generated for this register |
| once, as with the stack pointer and frame pointer registers. If |
| this macro is not defined, it is up to the machine-dependent files |
| to allocate such a register (if necessary). */ |
| #define PIC_OFFSET_TABLE_REGNUM (REG_P5) |
| |
| #define FDPIC_FPTR_REGNO REG_P1 |
| #define FDPIC_REGNO REG_P3 |
| #define OUR_FDPIC_REG get_hard_reg_initial_val (SImode, FDPIC_REGNO) |
| |
| /* A static chain register for nested functions. We need to use a |
| call-clobbered register for this. */ |
| #define STATIC_CHAIN_REGNUM REG_P2 |
| |
| /* Define this if functions should assume that stack space has been |
| allocated for arguments even when their values are passed in |
| registers. |
| |
| The value of this macro is the size, in bytes, of the area reserved for |
| arguments passed in registers. |
| |
| This space can either be allocated by the caller or be a part of the |
| machine-dependent stack frame: `OUTGOING_REG_PARM_STACK_SPACE' |
| says which. */ |
| #define FIXED_STACK_AREA 12 |
| #define REG_PARM_STACK_SPACE(FNDECL) FIXED_STACK_AREA |
| |
| /* Define this if the above stack space is to be considered part of the |
| * space allocated by the caller. */ |
| #define OUTGOING_REG_PARM_STACK_SPACE(FNTYPE) 1 |
| |
| /* Define this if the maximum size of all the outgoing args is to be |
| accumulated and pushed during the prologue. The amount can be |
| found in the variable crtl->outgoing_args_size. */ |
| #define ACCUMULATE_OUTGOING_ARGS 1 |
| |
| /*#define DATA_ALIGNMENT(TYPE, BASIC-ALIGN) for arrays.. */ |
| |
| /* If defined, a C expression to compute the alignment for a local |
| variable. TYPE is the data type, and ALIGN is the alignment that |
| the object would ordinarily have. The value of this macro is used |
| instead of that alignment to align the object. |
| |
| If this macro is not defined, then ALIGN is used. |
| |
| One use of this macro is to increase alignment of medium-size |
| data to make it all fit in fewer cache lines. */ |
| |
| #define LOCAL_ALIGNMENT(TYPE, ALIGN) bfin_local_alignment ((TYPE), (ALIGN)) |
| |
| #define TRAMPOLINE_SIZE (TARGET_FDPIC ? 30 : 18) |
| |
| /* Definitions for register eliminations. |
| |
| This is an array of structures. Each structure initializes one pair |
| of eliminable registers. The "from" register number is given first, |
| followed by "to". Eliminations of the same "from" register are listed |
| in order of preference. |
| |
| There are two registers that can always be eliminated on the i386. |
| The frame pointer and the arg pointer can be replaced by either the |
| hard frame pointer or to the stack pointer, depending upon the |
| circumstances. The hard frame pointer is not used before reload and |
| so it is not eligible for elimination. */ |
| |
| #define ELIMINABLE_REGS \ |
| {{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ |
| { ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \ |
| { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}} \ |
| |
| /* Define the offset between two registers, one to be eliminated, and the other |
| its replacement, at the start of a routine. */ |
| |
| #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \ |
| ((OFFSET) = bfin_initial_elimination_offset ((FROM), (TO))) |
| |
| /* This processor has |
| 8 data register for doing arithmetic |
| 8 pointer register for doing addressing, including |
| 1 stack pointer P6 |
| 1 frame pointer P7 |
| 4 sets of indexing registers (I0-3, B0-3, L0-3, M0-3) |
| 1 condition code flag register CC |
| 5 return address registers RETS/I/X/N/E |
| 1 arithmetic status register (ASTAT). */ |
| |
| #define FIRST_PSEUDO_REGISTER 50 |
| |
| #define D_REGNO_P(X) ((X) <= REG_R7) |
| #define P_REGNO_P(X) ((X) >= REG_P0 && (X) <= REG_P7) |
| #define I_REGNO_P(X) ((X) >= REG_I0 && (X) <= REG_I3) |
| #define DP_REGNO_P(X) (D_REGNO_P (X) || P_REGNO_P (X)) |
| #define ADDRESS_REGNO_P(X) ((X) >= REG_P0 && (X) <= REG_M3) |
| #define DREG_P(X) (REG_P (X) && D_REGNO_P (REGNO (X))) |
| #define PREG_P(X) (REG_P (X) && P_REGNO_P (REGNO (X))) |
| #define IREG_P(X) (REG_P (X) && I_REGNO_P (REGNO (X))) |
| #define DPREG_P(X) (REG_P (X) && DP_REGNO_P (REGNO (X))) |
| |
| #define REGISTER_NAMES { \ |
| "R0", "R1", "R2", "R3", "R4", "R5", "R6", "R7", \ |
| "P0", "P1", "P2", "P3", "P4", "P5", "SP", "FP", \ |
| "I0", "I1", "I2", "I3", "B0", "B1", "B2", "B3", \ |
| "L0", "L1", "L2", "L3", "M0", "M1", "M2", "M3", \ |
| "A0", "A1", \ |
| "CC", \ |
| "RETS", "RETI", "RETX", "RETN", "RETE", "ASTAT", "SEQSTAT", "USP", \ |
| "ARGP", \ |
| "LT0", "LT1", "LC0", "LC1", "LB0", "LB1" \ |
| } |
| |
| #define SHORT_REGISTER_NAMES { \ |
| "R0.L", "R1.L", "R2.L", "R3.L", "R4.L", "R5.L", "R6.L", "R7.L", \ |
| "P0.L", "P1.L", "P2.L", "P3.L", "P4.L", "P5.L", "SP.L", "FP.L", \ |
| "I0.L", "I1.L", "I2.L", "I3.L", "B0.L", "B1.L", "B2.L", "B3.L", \ |
| "L0.L", "L1.L", "L2.L", "L3.L", "M0.L", "M1.L", "M2.L", "M3.L", } |
| |
| #define HIGH_REGISTER_NAMES { \ |
| "R0.H", "R1.H", "R2.H", "R3.H", "R4.H", "R5.H", "R6.H", "R7.H", \ |
| "P0.H", "P1.H", "P2.H", "P3.H", "P4.H", "P5.H", "SP.H", "FP.H", \ |
| "I0.H", "I1.H", "I2.H", "I3.H", "B0.H", "B1.H", "B2.H", "B3.H", \ |
| "L0.H", "L1.H", "L2.H", "L3.H", "M0.H", "M1.H", "M2.H", "M3.H", } |
| |
| #define DREGS_PAIR_NAMES { \ |
| "R1:0.p", 0, "R3:2.p", 0, "R5:4.p", 0, "R7:6.p", 0, } |
| |
| #define BYTE_REGISTER_NAMES { \ |
| "R0.B", "R1.B", "R2.B", "R3.B", "R4.B", "R5.B", "R6.B", "R7.B", } |
| |
| |
| /* 1 for registers that have pervasive standard uses |
| and are not available for the register allocator. */ |
| |
| #define FIXED_REGISTERS \ |
| /*r0 r1 r2 r3 r4 r5 r6 r7 p0 p1 p2 p3 p4 p5 p6 p7 */ \ |
| { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, \ |
| /*i0 i1 i2 i3 b0 b1 b2 b3 l0 l1 l2 l3 m0 m1 m2 m3 */ \ |
| 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, \ |
| /*a0 a1 cc rets/i/x/n/e astat seqstat usp argp lt0/1 lc0/1 */ \ |
| 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ |
| /*lb0/1 */ \ |
| 1, 1 \ |
| } |
| |
| /* 1 for registers not available across function calls. |
| These must include the FIXED_REGISTERS and also any |
| registers that can be used without being saved. |
| The latter must include the registers where values are returned |
| and the register where structure-value addresses are passed. |
| Aside from that, you can include as many other registers as you like. */ |
| |
| #define CALL_USED_REGISTERS \ |
| /*r0 r1 r2 r3 r4 r5 r6 r7 p0 p1 p2 p3 p4 p5 p6 p7 */ \ |
| { 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 1, 0, \ |
| /*i0 i1 i2 i3 b0 b1 b2 b3 l0 l1 l2 l3 m0 m1 m2 m3 */ \ |
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ |
| /*a0 a1 cc rets/i/x/n/e astat seqstat usp argp lt0/1 lc0/1 */ \ |
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ |
| /*lb0/1 */ \ |
| 1, 1 \ |
| } |
| |
| /* Order in which to allocate registers. Each register must be |
| listed once, even those in FIXED_REGISTERS. List frame pointer |
| late and fixed registers last. Note that, in general, we prefer |
| registers listed in CALL_USED_REGISTERS, keeping the others |
| available for storage of persistent values. */ |
| |
| #define REG_ALLOC_ORDER \ |
| { REG_R0, REG_R1, REG_R2, REG_R3, REG_R7, REG_R6, REG_R5, REG_R4, \ |
| REG_P2, REG_P1, REG_P0, REG_P5, REG_P4, REG_P3, REG_P6, REG_P7, \ |
| REG_A0, REG_A1, \ |
| REG_I0, REG_I1, REG_I2, REG_I3, REG_B0, REG_B1, REG_B2, REG_B3, \ |
| REG_L0, REG_L1, REG_L2, REG_L3, REG_M0, REG_M1, REG_M2, REG_M3, \ |
| REG_RETS, REG_RETI, REG_RETX, REG_RETN, REG_RETE, \ |
| REG_ASTAT, REG_SEQSTAT, REG_USP, \ |
| REG_CC, REG_ARGP, \ |
| REG_LT0, REG_LT1, REG_LC0, REG_LC1, REG_LB0, REG_LB1 \ |
| } |
| |
| /* Define the classes of registers for register constraints in the |
| machine description. Also define ranges of constants. |
| |
| One of the classes must always be named ALL_REGS and include all hard regs. |
| If there is more than one class, another class must be named NO_REGS |
| and contain no registers. |
| |
| The name GENERAL_REGS must be the name of a class (or an alias for |
| another name such as ALL_REGS). This is the class of registers |
| that is allowed by "g" or "r" in a register constraint. |
| Also, registers outside this class are allocated only when |
| instructions express preferences for them. |
| |
| The classes must be numbered in nondecreasing order; that is, |
| a larger-numbered class must never be contained completely |
| in a smaller-numbered class. |
| |
| For any two classes, it is very desirable that there be another |
| class that represents their union. */ |
| |
| |
| enum reg_class |
| { |
| NO_REGS, |
| IREGS, |
| BREGS, |
| LREGS, |
| MREGS, |
| CIRCREGS, /* Circular buffering registers, Ix, Bx, Lx together form. See Automatic Circular Buffering. */ |
| DAGREGS, |
| EVEN_AREGS, |
| ODD_AREGS, |
| AREGS, |
| CCREGS, |
| EVEN_DREGS, |
| ODD_DREGS, |
| D0REGS, |
| D1REGS, |
| D2REGS, |
| D3REGS, |
| D4REGS, |
| D5REGS, |
| D6REGS, |
| D7REGS, |
| DREGS, |
| P0REGS, |
| FDPIC_REGS, |
| FDPIC_FPTR_REGS, |
| PREGS_CLOBBERED, |
| PREGS, |
| IPREGS, |
| DPREGS, |
| MOST_REGS, |
| LT_REGS, |
| LC_REGS, |
| LB_REGS, |
| PROLOGUE_REGS, |
| NON_A_CC_REGS, |
| ALL_REGS, LIM_REG_CLASSES |
| }; |
| |
| #define N_REG_CLASSES ((int)LIM_REG_CLASSES) |
| |
| #define GENERAL_REGS DPREGS |
| |
| /* Give names of register classes as strings for dump file. */ |
| |
| #define REG_CLASS_NAMES \ |
| { "NO_REGS", \ |
| "IREGS", \ |
| "BREGS", \ |
| "LREGS", \ |
| "MREGS", \ |
| "CIRCREGS", \ |
| "DAGREGS", \ |
| "EVEN_AREGS", \ |
| "ODD_AREGS", \ |
| "AREGS", \ |
| "CCREGS", \ |
| "EVEN_DREGS", \ |
| "ODD_DREGS", \ |
| "D0REGS", \ |
| "D1REGS", \ |
| "D2REGS", \ |
| "D3REGS", \ |
| "D4REGS", \ |
| "D5REGS", \ |
| "D6REGS", \ |
| "D7REGS", \ |
| "DREGS", \ |
| "P0REGS", \ |
| "FDPIC_REGS", \ |
| "FDPIC_FPTR_REGS", \ |
| "PREGS_CLOBBERED", \ |
| "PREGS", \ |
| "IPREGS", \ |
| "DPREGS", \ |
| "MOST_REGS", \ |
| "LT_REGS", \ |
| "LC_REGS", \ |
| "LB_REGS", \ |
| "PROLOGUE_REGS", \ |
| "NON_A_CC_REGS", \ |
| "ALL_REGS" } |
| |
| /* An initializer containing the contents of the register classes, as integers |
| which are bit masks. The Nth integer specifies the contents of class N. |
| The way the integer MASK is interpreted is that register R is in the class |
| if `MASK & (1 << R)' is 1. |
| |
| When the machine has more than 32 registers, an integer does not suffice. |
| Then the integers are replaced by sub-initializers, braced groupings |
| containing several integers. Each sub-initializer must be suitable as an |
| initializer for the type `HARD_REG_SET' which is defined in |
| `hard-reg-set.h'. */ |
| |
| /* NOTE: DSP registers, IREGS - AREGS, are not GENERAL_REGS. We use |
| MOST_REGS as the union of DPREGS and DAGREGS. */ |
| |
| #define REG_CLASS_CONTENTS \ |
| /* 31 - 0 63-32 */ \ |
| { { 0x00000000, 0 }, /* NO_REGS */ \ |
| { 0x000f0000, 0 }, /* IREGS */ \ |
| { 0x00f00000, 0 }, /* BREGS */ \ |
| { 0x0f000000, 0 }, /* LREGS */ \ |
| { 0xf0000000, 0 }, /* MREGS */ \ |
| { 0x0fff0000, 0 }, /* CIRCREGS */ \ |
| { 0xffff0000, 0 }, /* DAGREGS */ \ |
| { 0x00000000, 0x1 }, /* EVEN_AREGS */ \ |
| { 0x00000000, 0x2 }, /* ODD_AREGS */ \ |
| { 0x00000000, 0x3 }, /* AREGS */ \ |
| { 0x00000000, 0x4 }, /* CCREGS */ \ |
| { 0x00000055, 0 }, /* EVEN_DREGS */ \ |
| { 0x000000aa, 0 }, /* ODD_DREGS */ \ |
| { 0x00000001, 0 }, /* D0REGS */ \ |
| { 0x00000002, 0 }, /* D1REGS */ \ |
| { 0x00000004, 0 }, /* D2REGS */ \ |
| { 0x00000008, 0 }, /* D3REGS */ \ |
| { 0x00000010, 0 }, /* D4REGS */ \ |
| { 0x00000020, 0 }, /* D5REGS */ \ |
| { 0x00000040, 0 }, /* D6REGS */ \ |
| { 0x00000080, 0 }, /* D7REGS */ \ |
| { 0x000000ff, 0 }, /* DREGS */ \ |
| { 0x00000100, 0x000 }, /* P0REGS */ \ |
| { 0x00000800, 0x000 }, /* FDPIC_REGS */ \ |
| { 0x00000200, 0x000 }, /* FDPIC_FPTR_REGS */ \ |
| { 0x00004700, 0x800 }, /* PREGS_CLOBBERED */ \ |
| { 0x0000ff00, 0x800 }, /* PREGS */ \ |
| { 0x000fff00, 0x800 }, /* IPREGS */ \ |
| { 0x0000ffff, 0x800 }, /* DPREGS */ \ |
| { 0xffffffff, 0x800 }, /* MOST_REGS */\ |
| { 0x00000000, 0x3000 }, /* LT_REGS */\ |
| { 0x00000000, 0xc000 }, /* LC_REGS */\ |
| { 0x00000000, 0x30000 }, /* LB_REGS */\ |
| { 0x00000000, 0x3f7f8 }, /* PROLOGUE_REGS */\ |
| { 0xffffffff, 0x3fff8 }, /* NON_A_CC_REGS */\ |
| { 0xffffffff, 0x3ffff }} /* ALL_REGS */ |
| |
| #define IREG_POSSIBLE_P(OUTER) \ |
| ((OUTER) == POST_INC || (OUTER) == PRE_INC \ |
| || (OUTER) == POST_DEC || (OUTER) == PRE_DEC \ |
| || (OUTER) == MEM || (OUTER) == ADDRESS) |
| |
| #define MODE_CODE_BASE_REG_CLASS(MODE, AS, OUTER, INDEX) \ |
| ((MODE) == HImode && IREG_POSSIBLE_P (OUTER) ? IPREGS : PREGS) |
| |
| #define INDEX_REG_CLASS PREGS |
| |
| #define REGNO_OK_FOR_BASE_STRICT_P(X, MODE, OUTER, INDEX) \ |
| (P_REGNO_P (X) || (X) == REG_ARGP \ |
| || (IREG_POSSIBLE_P (OUTER) && (MODE) == HImode \ |
| && I_REGNO_P (X))) |
| |
| #define REGNO_OK_FOR_BASE_NONSTRICT_P(X, MODE, OUTER, INDEX) \ |
| ((X) >= FIRST_PSEUDO_REGISTER \ |
| || REGNO_OK_FOR_BASE_STRICT_P (X, MODE, OUTER, INDEX)) |
| |
| #ifdef REG_OK_STRICT |
| #define REGNO_MODE_CODE_OK_FOR_BASE_P(X, MODE, AS, OUTER, INDEX) \ |
| REGNO_OK_FOR_BASE_STRICT_P (X, MODE, OUTER, INDEX) |
| #else |
| #define REGNO_MODE_CODE_OK_FOR_BASE_P(X, MODE, AS, OUTER, INDEX) \ |
| REGNO_OK_FOR_BASE_NONSTRICT_P (X, MODE, OUTER, INDEX) |
| #endif |
| |
| #define REGNO_OK_FOR_INDEX_P(X) 0 |
| |
| /* The same information, inverted: |
| Return the class number of the smallest class containing |
| reg number REGNO. This could be a conditional expression |
| or could index an array. */ |
| |
| #define REGNO_REG_CLASS(REGNO) \ |
| ((REGNO) == REG_R0 ? D0REGS \ |
| : (REGNO) == REG_R1 ? D1REGS \ |
| : (REGNO) == REG_R2 ? D2REGS \ |
| : (REGNO) == REG_R3 ? D3REGS \ |
| : (REGNO) == REG_R4 ? D4REGS \ |
| : (REGNO) == REG_R5 ? D5REGS \ |
| : (REGNO) == REG_R6 ? D6REGS \ |
| : (REGNO) == REG_R7 ? D7REGS \ |
| : (REGNO) == REG_P0 ? P0REGS \ |
| : (REGNO) < REG_I0 ? PREGS \ |
| : (REGNO) == REG_ARGP ? PREGS \ |
| : (REGNO) >= REG_I0 && (REGNO) <= REG_I3 ? IREGS \ |
| : (REGNO) >= REG_L0 && (REGNO) <= REG_L3 ? LREGS \ |
| : (REGNO) >= REG_B0 && (REGNO) <= REG_B3 ? BREGS \ |
| : (REGNO) >= REG_M0 && (REGNO) <= REG_M3 ? MREGS \ |
| : (REGNO) == REG_A0 || (REGNO) == REG_A1 ? AREGS \ |
| : (REGNO) == REG_LT0 || (REGNO) == REG_LT1 ? LT_REGS \ |
| : (REGNO) == REG_LC0 || (REGNO) == REG_LC1 ? LC_REGS \ |
| : (REGNO) == REG_LB0 || (REGNO) == REG_LB1 ? LB_REGS \ |
| : (REGNO) == REG_CC ? CCREGS \ |
| : (REGNO) >= REG_RETS ? PROLOGUE_REGS \ |
| : NO_REGS) |
| |
| /* When this hook returns true for MODE, the compiler allows |
| registers explicitly used in the rtl to be used as spill registers |
| but prevents the compiler from extending the lifetime of these |
| registers. */ |
| #define TARGET_SMALL_REGISTER_CLASSES_FOR_MODE_P hook_bool_mode_true |
| |
| /* Return the maximum number of consecutive registers |
| needed to represent mode MODE in a register of class CLASS. */ |
| #define CLASS_MAX_NREGS(CLASS, MODE) \ |
| ((MODE) == V2PDImode && (CLASS) == AREGS ? 2 \ |
| : ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)) |
| |
| /* A C expression that is nonzero if hard register TO can be |
| considered for use as a rename register for FROM register */ |
| #define HARD_REGNO_RENAME_OK(FROM, TO) bfin_hard_regno_rename_ok (FROM, TO) |
| |
| /* `PREFERRED_RELOAD_CLASS (X, CLASS)' |
| A C expression that places additional restrictions on the register |
| class to use when it is necessary to copy value X into a register |
| in class CLASS. The value is a register class; perhaps CLASS, or |
| perhaps another, smaller class. */ |
| #define PREFERRED_RELOAD_CLASS(X, CLASS) \ |
| (GET_CODE (X) == POST_INC \ |
| || GET_CODE (X) == POST_DEC \ |
| || GET_CODE (X) == PRE_DEC ? PREGS : (CLASS)) |
| |
| /* Function Calling Conventions. */ |
| |
| /* The type of the current function; normal functions are of type |
| SUBROUTINE. */ |
| typedef enum { |
| SUBROUTINE, INTERRUPT_HANDLER, EXCPT_HANDLER, NMI_HANDLER |
| } e_funkind; |
| #define FUNCTION_RETURN_REGISTERS { REG_RETS, REG_RETI, REG_RETX, REG_RETN } |
| |
| #define FUNCTION_ARG_REGISTERS { REG_R0, REG_R1, REG_R2, -1 } |
| |
| /* Flags for the call/call_value rtl operations set up by function_arg */ |
| #define CALL_NORMAL 0x00000000 /* no special processing */ |
| #define CALL_LONG 0x00000001 /* always call indirect */ |
| #define CALL_SHORT 0x00000002 /* always call by symbol */ |
| |
| typedef struct { |
| int words; /* # words passed so far */ |
| int nregs; /* # registers available for passing */ |
| int *arg_regs; /* array of register -1 terminated */ |
| int call_cookie; /* Do special things for this call */ |
| } CUMULATIVE_ARGS; |
| |
| #define FUNCTION_ARG_REGNO_P(REGNO) function_arg_regno_p (REGNO) |
| |
| |
| /* Initialize a variable CUM of type CUMULATIVE_ARGS |
| for a call to a function whose data type is FNTYPE. |
| For a library call, FNTYPE is 0. */ |
| #define INIT_CUMULATIVE_ARGS(CUM,FNTYPE,LIBNAME,INDIRECT, N_NAMED_ARGS) \ |
| (init_cumulative_args (&CUM, FNTYPE, LIBNAME)) |
| |
| /* Define how to find the value returned by a function. |
| VALTYPE is the data type of the value (as a tree). |
| If the precise function being called is known, FUNC is its FUNCTION_DECL; |
| otherwise, FUNC is 0. |
| */ |
| |
| #define VALUE_REGNO(MODE) (REG_R0) |
| |
| #define FUNCTION_VALUE(VALTYPE, FUNC) \ |
| gen_rtx_REG (TYPE_MODE (VALTYPE), \ |
| VALUE_REGNO(TYPE_MODE(VALTYPE))) |
| |
| /* Define how to find the value returned by a library function |
| assuming the value has mode MODE. */ |
| |
| #define LIBCALL_VALUE(MODE) gen_rtx_REG (MODE, VALUE_REGNO(MODE)) |
| |
| #define FUNCTION_VALUE_REGNO_P(N) ((N) == REG_R0) |
| |
| #define DEFAULT_PCC_STRUCT_RETURN 0 |
| |
| /* Before the prologue, the return address is in the RETS register. */ |
| #define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (Pmode, REG_RETS) |
| |
| #define RETURN_ADDR_RTX(COUNT, FRAME) bfin_return_addr_rtx (COUNT) |
| |
| #define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (REG_RETS) |
| |
| /* Call instructions don't modify the stack pointer on the Blackfin. */ |
| #define INCOMING_FRAME_SP_OFFSET 0 |
| |
| /* Describe how we implement __builtin_eh_return. */ |
| #define EH_RETURN_DATA_REGNO(N) ((N) < 2 ? (N) : INVALID_REGNUM) |
| #define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, REG_P2) |
| #define EH_RETURN_HANDLER_RTX \ |
| gen_frame_mem (Pmode, plus_constant (Pmode, frame_pointer_rtx, \ |
| UNITS_PER_WORD)) |
| |
| /* Addressing Modes */ |
| |
| /* A number, the maximum number of registers that can appear in a |
| valid memory address. Note that it is up to you to specify a |
| value equal to the maximum number that `TARGET_LEGITIMATE_ADDRESS_P' |
| would ever accept. */ |
| #define MAX_REGS_PER_ADDRESS 1 |
| |
| #define LEGITIMATE_MODE_FOR_AUTOINC_P(MODE) \ |
| (GET_MODE_SIZE (MODE) <= 4 || (MODE) == PDImode) |
| |
| #define HAVE_POST_INCREMENT 1 |
| #define HAVE_POST_DECREMENT 1 |
| #define HAVE_PRE_DECREMENT 1 |
| |
| /* `LEGITIMATE_PIC_OPERAND_P (X)' |
| A C expression that is nonzero if X is a legitimate immediate |
| operand on the target machine when generating position independent |
| code. You can assume that X satisfies `CONSTANT_P', so you need |
| not check this. You can also assume FLAG_PIC is true, so you need |
| not check it either. You need not define this macro if all |
| constants (including `SYMBOL_REF') can be immediate operands when |
| generating position independent code. */ |
| #define LEGITIMATE_PIC_OPERAND_P(X) ! SYMBOLIC_CONST (X) |
| |
| #define SYMBOLIC_CONST(X) \ |
| (GET_CODE (X) == SYMBOL_REF \ |
| || GET_CODE (X) == LABEL_REF \ |
| || (GET_CODE (X) == CONST && symbolic_reference_mentioned_p (X))) |
| |
| #define NOTICE_UPDATE_CC(EXPR, INSN) 0 |
| |
| /* Max number of bytes we can move from memory to memory |
| in one reasonably fast instruction. */ |
| #define MOVE_MAX UNITS_PER_WORD |
| |
| /* If a memory-to-memory move would take MOVE_RATIO or more simple |
| move-instruction pairs, we will do a movmem or libcall instead. */ |
| |
| #define MOVE_RATIO(speed) 5 |
| |
| /* STORAGE LAYOUT: target machine storage layout |
| Define this macro as a C expression which is nonzero if accessing |
| less than a word of memory (i.e. a `char' or a `short') is no |
| faster than accessing a word of memory, i.e., if such access |
| require more than one instruction or if there is no difference in |
| cost between byte and (aligned) word loads. |
| |
| When this macro is not defined, the compiler will access a field by |
| finding the smallest containing object; when it is defined, a |
| fullword load will be used if alignment permits. Unless bytes |
| accesses are faster than word accesses, using word accesses is |
| preferable since it may eliminate subsequent memory access if |
| subsequent accesses occur to other fields in the same word of the |
| structure, but to different bytes. */ |
| #define SLOW_BYTE_ACCESS 0 |
| #define SLOW_SHORT_ACCESS 0 |
| |
| /* Define this if most significant bit is lowest numbered |
| in instructions that operate on numbered bit-fields. */ |
| #define BITS_BIG_ENDIAN 0 |
| |
| /* Define this if most significant byte of a word is the lowest numbered. |
| We can't access bytes but if we could we would in the Big Endian order. */ |
| #define BYTES_BIG_ENDIAN 0 |
| |
| /* Define this if most significant word of a multiword number is numbered. */ |
| #define WORDS_BIG_ENDIAN 0 |
| |
| /* Width in bits of a "word", which is the contents of a machine register. |
| Note that this is not necessarily the width of data type `int'; |
| if using 16-bit ints on a 68000, this would still be 32. |
| But on a machine with 16-bit registers, this would be 16. */ |
| #define BITS_PER_WORD 32 |
| |
| /* Width of a word, in units (bytes). */ |
| #define UNITS_PER_WORD 4 |
| |
| /* Width in bits of a pointer. |
| See also the macro `Pmode1' defined below. */ |
| #define POINTER_SIZE 32 |
| |
| /* Allocation boundary (in *bits*) for storing pointers in memory. */ |
| #define POINTER_BOUNDARY 32 |
| |
| /* Allocation boundary (in *bits*) for storing arguments in argument list. */ |
| #define PARM_BOUNDARY 32 |
| |
| /* Boundary (in *bits*) on which stack pointer should be aligned. */ |
| #define STACK_BOUNDARY 32 |
| |
| /* Allocation boundary (in *bits*) for the code of a function. */ |
| #define FUNCTION_BOUNDARY 32 |
| |
| /* Alignment of field after `int : 0' in a structure. */ |
| #define EMPTY_FIELD_BOUNDARY BITS_PER_WORD |
| |
| /* No data type wants to be aligned rounder than this. */ |
| #define BIGGEST_ALIGNMENT 32 |
| |
| /* Define this if move instructions will actually fail to work |
| when given unaligned data. */ |
| #define STRICT_ALIGNMENT 1 |
| |
| /* (shell-command "rm c-decl.o stor-layout.o") |
| * never define PCC_BITFIELD_TYPE_MATTERS |
| * really cause some alignment problem |
| */ |
| |
| #define UNITS_PER_FLOAT ((FLOAT_TYPE_SIZE + BITS_PER_UNIT - 1) / \ |
| BITS_PER_UNIT) |
| |
| #define UNITS_PER_DOUBLE ((DOUBLE_TYPE_SIZE + BITS_PER_UNIT - 1) / \ |
| BITS_PER_UNIT) |
| |
| |
| /* what is the 'type' of size_t */ |
| #define SIZE_TYPE "long unsigned int" |
| |
| /* Define this as 1 if `char' should by default be signed; else as 0. */ |
| #define DEFAULT_SIGNED_CHAR 1 |
| #define FLOAT_TYPE_SIZE BITS_PER_WORD |
| #define SHORT_TYPE_SIZE 16 |
| #define CHAR_TYPE_SIZE 8 |
| #define INT_TYPE_SIZE 32 |
| #define LONG_TYPE_SIZE 32 |
| #define LONG_LONG_TYPE_SIZE 64 |
| |
| /* Note: Fix this to depend on target switch. -- lev */ |
| |
| /* Note: Try to implement double and force long double. -- tonyko |
| * #define __DOUBLES_ARE_FLOATS__ |
| * #define DOUBLE_TYPE_SIZE FLOAT_TYPE_SIZE |
| * #define LONG_DOUBLE_TYPE_SIZE DOUBLE_TYPE_SIZE |
| * #define DOUBLES_ARE_FLOATS 1 |
| */ |
| |
| #define DOUBLE_TYPE_SIZE 64 |
| #define LONG_DOUBLE_TYPE_SIZE 64 |
| |
| /* `PROMOTE_MODE (M, UNSIGNEDP, TYPE)' |
| A macro to update M and UNSIGNEDP when an object whose type is |
| TYPE and which has the specified mode and signedness is to be |
| stored in a register. This macro is only called when TYPE is a |
| scalar type. |
| |
| On most RISC machines, which only have operations that operate on |
| a full register, define this macro to set M to `word_mode' if M is |
| an integer mode narrower than `BITS_PER_WORD'. In most cases, |
| only integer modes should be widened because wider-precision |
| floating-point operations are usually more expensive than their |
| narrower counterparts. |
| |
| For most machines, the macro definition does not change UNSIGNEDP. |
| However, some machines, have instructions that preferentially |
| handle either signed or unsigned quantities of certain modes. For |
| example, on the DEC Alpha, 32-bit loads from memory and 32-bit add |
| instructions sign-extend the result to 64 bits. On such machines, |
| set UNSIGNEDP according to which kind of extension is more |
| efficient. |
| |
| Do not define this macro if it would never modify M.*/ |
| |
| #define BFIN_PROMOTE_MODE_P(MODE) \ |
| (!TARGET_DSP && GET_MODE_CLASS (MODE) == MODE_INT \ |
| && GET_MODE_SIZE (MODE) < UNITS_PER_WORD) |
| |
| #define PROMOTE_MODE(MODE, UNSIGNEDP, TYPE) \ |
| if (BFIN_PROMOTE_MODE_P(MODE)) \ |
| { \ |
| if (MODE == QImode) \ |
| UNSIGNEDP = 1; \ |
| else if (MODE == HImode) \ |
| UNSIGNEDP = 0; \ |
| (MODE) = SImode; \ |
| } |
| |
| /* Describing Relative Costs of Operations */ |
| |
| /* Do not put function addr into constant pool */ |
| #define NO_FUNCTION_CSE 1 |
| |
| /* Specify the machine mode that this machine uses |
| for the index in the tablejump instruction. */ |
| #define CASE_VECTOR_MODE SImode |
| |
| #define JUMP_TABLES_IN_TEXT_SECTION flag_pic |
| |
| /* Define if operations between registers always perform the operation |
| on the full register even if a narrower mode is specified. |
| #define WORD_REGISTER_OPERATIONS 1 |
| */ |
| |
| /* Evaluates to true if A and B are mac flags that can be used |
| together in a single multiply insn. That is the case if they are |
| both the same flag not involving M, or if one is a combination of |
| the other with M. */ |
| #define MACFLAGS_MATCH_P(A, B) \ |
| ((A) == (B) \ |
| || ((A) == MACFLAG_NONE && (B) == MACFLAG_M) \ |
| || ((A) == MACFLAG_M && (B) == MACFLAG_NONE) \ |
| || ((A) == MACFLAG_IS && (B) == MACFLAG_IS_M) \ |
| || ((A) == MACFLAG_IS_M && (B) == MACFLAG_IS)) |
| |
| /* Switch into a generic section. */ |
| #define TARGET_ASM_NAMED_SECTION default_elf_asm_named_section |
| |
| #define PRINT_OPERAND(FILE, RTX, CODE) print_operand (FILE, RTX, CODE) |
| #define PRINT_OPERAND_ADDRESS(FILE, RTX) print_address_operand (FILE, RTX) |
| |
| typedef enum sections { |
| CODE_DIR, |
| DATA_DIR, |
| LAST_SECT_NM |
| } SECT_ENUM_T; |
| |
| typedef enum directives { |
| LONG_CONST_DIR, |
| SHORT_CONST_DIR, |
| BYTE_CONST_DIR, |
| SPACE_DIR, |
| INIT_DIR, |
| LAST_DIR_NM |
| } DIR_ENUM_T; |
| |
| #define IS_ASM_LOGICAL_LINE_SEPARATOR(C, STR) \ |
| ((C) == ';' \ |
| || ((C) == '|' && (STR)[1] == '|')) |
| |
| #define TEXT_SECTION_ASM_OP ".text;" |
| #define DATA_SECTION_ASM_OP ".data;" |
| |
| #define ASM_APP_ON "" |
| #define ASM_APP_OFF "" |
| |
| #define ASM_GLOBALIZE_LABEL1(FILE, NAME) \ |
| do { fputs (".global ", FILE); \ |
| assemble_name (FILE, NAME); \ |
| fputc (';',FILE); \ |
| fputc ('\n',FILE); \ |
| } while (0) |
| |
| #define ASM_DECLARE_FUNCTION_NAME(FILE,NAME,DECL) \ |
| do { \ |
| fputs (".type ", FILE); \ |
| assemble_name (FILE, NAME); \ |
| fputs (", STT_FUNC", FILE); \ |
| fputc (';',FILE); \ |
| fputc ('\n',FILE); \ |
| ASM_OUTPUT_LABEL(FILE, NAME); \ |
| } while (0) |
| |
| #define ASM_OUTPUT_LABEL(FILE, NAME) \ |
| do { assemble_name (FILE, NAME); \ |
| fputs (":\n",FILE); \ |
| } while (0) |
| |
| #define ASM_OUTPUT_LABELREF(FILE,NAME) \ |
| do { fprintf (FILE, "_%s", NAME); \ |
| } while (0) |
| |
| #define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \ |
| do { char __buf[256]; \ |
| fprintf (FILE, "\t.dd\t"); \ |
| ASM_GENERATE_INTERNAL_LABEL (__buf, "L", VALUE); \ |
| assemble_name (FILE, __buf); \ |
| fputc (';', FILE); \ |
| fputc ('\n', FILE); \ |
| } while (0) |
| |
| #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \ |
| MY_ASM_OUTPUT_ADDR_DIFF_ELT(FILE, VALUE, REL) |
| |
| #define MY_ASM_OUTPUT_ADDR_DIFF_ELT(FILE, VALUE, REL) \ |
| do { \ |
| char __buf[256]; \ |
| fprintf (FILE, "\t.dd\t"); \ |
| ASM_GENERATE_INTERNAL_LABEL (__buf, "L", VALUE); \ |
| assemble_name (FILE, __buf); \ |
| fputs (" - ", FILE); \ |
| ASM_GENERATE_INTERNAL_LABEL (__buf, "L", REL); \ |
| assemble_name (FILE, __buf); \ |
| fputc (';', FILE); \ |
| fputc ('\n', FILE); \ |
| } while (0) |
| |
| #define ASM_OUTPUT_ALIGN(FILE,LOG) \ |
| do { \ |
| if ((LOG) != 0) \ |
| fprintf (FILE, "\t.align %d\n", 1 << (LOG)); \ |
| } while (0) |
| |
| #define ASM_OUTPUT_SKIP(FILE,SIZE) \ |
| do { \ |
| asm_output_skip (FILE, SIZE); \ |
| } while (0) |
| |
| #define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE, ROUNDED) \ |
| do { \ |
| switch_to_section (data_section); \ |
| if ((SIZE) >= (unsigned int) 4 ) ASM_OUTPUT_ALIGN(FILE,2); \ |
| ASM_OUTPUT_SIZE_DIRECTIVE (FILE, NAME, SIZE); \ |
| ASM_OUTPUT_LABEL (FILE, NAME); \ |
| fprintf (FILE, "%s %ld;\n", ASM_SPACE, \ |
| (ROUNDED) > (unsigned int) 1 ? (ROUNDED) : 1); \ |
| } while (0) |
| |
| #define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \ |
| do { \ |
| ASM_GLOBALIZE_LABEL1(FILE,NAME); \ |
| ASM_OUTPUT_LOCAL (FILE, NAME, SIZE, ROUNDED); } while(0) |
| |
| #define ASM_COMMENT_START "//" |
| |
| #define PROFILE_BEFORE_PROLOGUE |
| #define FUNCTION_PROFILER(FILE, LABELNO) \ |
| do { \ |
| fprintf (FILE, "\t[--SP] = RETS;\n"); \ |
| if (TARGET_LONG_CALLS) \ |
| { \ |
| fprintf (FILE, "\tP2.h = __mcount;\n"); \ |
| fprintf (FILE, "\tP2.l = __mcount;\n"); \ |
| fprintf (FILE, "\tCALL (P2);\n"); \ |
| } \ |
| else \ |
| fprintf (FILE, "\tCALL __mcount;\n"); \ |
| fprintf (FILE, "\tRETS = [SP++];\n"); \ |
| } while(0) |
| |
| #undef NO_PROFILE_COUNTERS |
| #define NO_PROFILE_COUNTERS 1 |
| |
| #define ASM_OUTPUT_REG_PUSH(FILE, REGNO) fprintf (FILE, "\t[--SP] = %s;\n", reg_names[REGNO]) |
| #define ASM_OUTPUT_REG_POP(FILE, REGNO) fprintf (FILE, "\t%s = [SP++];\n", reg_names[REGNO]) |
| |
| extern rtx bfin_cc_rtx, bfin_rets_rtx; |
| |
| /* This works for GAS and some other assemblers. */ |
| #define SET_ASM_OP ".set " |
| |
| /* DBX register number for a given compiler register number */ |
| #define DBX_REGISTER_NUMBER(REGNO) (REGNO) |
| |
| #define SIZE_ASM_OP "\t.size\t" |
| |
| extern int splitting_for_sched, splitting_loops; |
| |
| #define PRINT_OPERAND_PUNCT_VALID_P(CHAR) ((CHAR) == '!') |
| |
| #ifndef TARGET_SUPPORTS_SYNC_CALLS |
| #define TARGET_SUPPORTS_SYNC_CALLS 0 |
| #endif |
| |
| struct bfin_cpu |
| { |
| const char *name; |
| bfin_cpu_t type; |
| int si_revision; |
| unsigned int workarounds; |
| }; |
| |
| extern const struct bfin_cpu bfin_cpus[]; |
| |
| #endif /* _BFIN_CONFIG */ |